Page MenuHomeHEPForge
Files F7879300

No OneTemporary
Actions

View Options

Index: contrib/contribs/LundPlane/tags/2.0.3/AUTHORS
===================================================================
--- contrib/contribs/LundPlane/tags/2.0.3/AUTHORS (revision 0)
+++ contrib/contribs/LundPlane/tags/2.0.3/AUTHORS (revision 1345)
@@ -0,0 +1,34 @@
+The LundPlane FastJet contrib is developed and maintained by:
+
+ Frederic Dreyer <frederic.dreyer@physics.ox.ac.uk>
+ Keith Hamilton <keith.hamilton@ucl.ac.uk>
+ Alexander Karlberg <alexander.karlberg@physics.ox.ac.uk>
+ Gavin P. Salam <gavin.salam@physics.ox.ac.uk>
+ Ludovic Scyboz <ludovic.scyboz@physics.ox.ac.uk>
+ Gregory Soyez <soyez@fastjet.fr>
+ Rob Verheyen <r.verheyen@ucl.ac.uk>
+
+The physics is based on:
+
+ The Lund Jet Plane.
+ Frederic A. Dreyer, Gavin P. Salam, and Gregory Soyez
+ JHEP 12 (2018) 064
+ https://doi.org/10.1007/JHEP12(2018)064
+ arXiv:1807.04758
+
+The definition of azimuthal angles, and examples of
+all-order observables sensitive to spin correlations
+(example_dpsi_collinear and example_dpsi_slice), are from:
+
+ Spin correlations in final-state parton showers and jet observables
+ A. Karlberg, G. P. Salam, L. Scyboz, and R. Verheyen
+ Eur. Phys. J. C 81, 681 (2021)
+ https://doi.org/10.1140/epjc/s10052-021-09378-0
+ arXiv:2103.16526
+
+and
+
+ Soft spin correlations in final-state parton showers
+ K. Hamilton, A. Karlberg, G. P. Salam, L. Scyboz,
+ and R. Verheyen
+ arXiv:2111.01161
Index: contrib/contribs/LundPlane/tags/2.0.3/VERSION
===================================================================
--- contrib/contribs/LundPlane/tags/2.0.3/VERSION (revision 0)
+++ contrib/contribs/LundPlane/tags/2.0.3/VERSION (revision 1345)
@@ -0,0 +1 @@
+2.0.3
Index: contrib/contribs/LundPlane/tags/2.0.3/example_dpsi_collinear.cc
===================================================================
--- contrib/contribs/LundPlane/tags/2.0.3/example_dpsi_collinear.cc (revision 0)
+++ contrib/contribs/LundPlane/tags/2.0.3/example_dpsi_collinear.cc (revision 1345)
@@ -0,0 +1,145 @@
+//----------------------------------------------------------------------
+/// \file example_dpsi_collinear.cc
+///
+/// This example program is meant to illustrate how the
+/// fastjet::contrib::RecursiveLundEEGenerator class is used.
+///
+/// Run this example with
+///
+/// \verbatim
+/// ./example_dpsi_collinear < ../data/single-ee-event.dat
+/// \endverbatim
+
+//----------------------------------------------------------------------
+// $Id$
+//
+// Copyright (c) 2018-, Frederic A. Dreyer, Keith Hamilton, Alexander Karlberg,
+// Gavin P. Salam, Ludovic Scyboz, Gregory Soyez, Rob Verheyen
+//
+//----------------------------------------------------------------------
+// This file is part of FastJet contrib.
+//
+// It is free software; you can redistribute it and/or modify it under
+// the terms of the GNU General Public License as published by the
+// Free Software Foundation; either version 2 of the License, or (at
+// your option) any later version.
+//
+// It is distributed in the hope that it will be useful, but WITHOUT
+// ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+// or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
+// License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this code. If not, see <http://www.gnu.org/licenses/>.
+//----------------------------------------------------------------------
+
+#include <iostream>
+#include <fstream>
+#include <sstream>
+
+#include "fastjet/PseudoJet.hh"
+#include "fastjet/EECambridgePlugin.hh"
+#include <string>
+#include "RecursiveLundEEGenerator.hh" // In external code, this should be fastjet/contrib/RecursiveLundEEGenerator.hh
+using namespace std;
+using namespace fastjet;
+
+// Definitions for the collinear observable
+double z1_cut = 0.1;
+double z2_cut = 0.1;
+
+// forward declaration to make things clearer
+void read_event(vector<PseudoJet> &event);
+
+//----------------------------------------------------------------------
+int main(){
+
+ //----------------------------------------------------------
+ // read in input particles
+ vector<PseudoJet> event;
+ read_event(event);
+
+ cout << "# read an event with " << event.size() << " particles" << endl;
+ //----------------------------------------------------------
+ // create an instance of RecursiveLundEEGenerator, with default options
+ int depth = -1;
+ bool dynamic_psi_reference = true;
+ fastjet::contrib::RecursiveLundEEGenerator lund(depth, dynamic_psi_reference);
+
+ // first get some C/A jets
+ double y3_cut = 1.0;
+ JetDefinition::Plugin* ee_plugin = new EECambridgePlugin(y3_cut);
+ JetDefinition jet_def(ee_plugin);
+ ClusterSequence cs(event, jet_def);
+
+ // Get the list of primary declusterings
+ const vector<contrib::LundEEDeclustering> declusts = lund.result(cs);
+
+ // Find the highest-kt primary declustering (ordered in kt by default)
+ int i_primary = -1;
+ double psi_1;
+ for (int i=0; i<declusts.size(); i++) {
+ if (declusts[i].depth() == 0 && declusts[i].z() > z1_cut) {
+ i_primary = i;
+ psi_1 = declusts[i].psibar();
+ break;
+ }
+ }
+ if (i_primary < 0) return 0;
+
+ // Find the highest-kt secondary associated to that Lund leaf
+ int iplane_to_follow = declusts[i_primary].leaf_iplane();
+ vector<const contrib::LundEEDeclustering *> secondaries;
+ for (const auto & declust: declusts){
+ if (declust.iplane() == iplane_to_follow) secondaries.push_back(&declust);
+ }
+ if(secondaries.size() < 1) return 0;
+
+ int i_secondary = -1;
+ double dpsi;
+ for (int i=0; i<secondaries.size(); i++) {
+ if (secondaries[i]->z() > z2_cut) {
+ i_secondary = i;
+ double psi_2 = secondaries[i]->psibar();
+ dpsi = contrib::lund_plane::map_to_pi(psi_2-psi_1);
+ break;
+ }
+ }
+ if (i_secondary < 0) return 0;
+
+ cout << "Primary that passes the zcut of "
+ << z1_cut << ", with Lund coordinates ( ln 1/Delta, ln kt, psibar ):" << endl;
+ pair<double,double> coords = declusts[i_primary].lund_coordinates();
+ cout << "index [" << i_primary << "](" << coords.first << ", " << coords.second << ", "
+ << declusts[i_primary].psibar() << ")" << endl;
+ cout << endl << "with Lund coordinates for the secondary plane that passes the zcut of "
+ << z2_cut << endl;
+ coords = secondaries[i_secondary]->lund_coordinates();
+ cout << "index [" << i_secondary << "](" << coords.first << ", " << coords.second << ", "
+ << secondaries[i_secondary]->psibar() << ")";
+
+ cout << " --> delta_psi = " << dpsi << endl;
+
+ // Delete the EECambridge plugin
+ delete ee_plugin;
+
+ return 0;
+}
+
+// read in input particles
+void read_event(vector<PseudoJet> &event){
+ string line;
+ while (getline(cin, line)) {
+ istringstream linestream(line);
+ // take substrings to avoid problems when there is extra "pollution"
+ // characters (e.g. line-feed).
+ if (line.substr(0,4) == "#END") {return;}
+ if (line.substr(0,1) == "#") {continue;}
+ double px,py,pz,E;
+ linestream >> px >> py >> pz >> E;
+ PseudoJet particle(px,py,pz,E);
+
+ // push event onto back of full_event vector
+ event.push_back(particle);
+ }
+}
Property changes on: contrib/contribs/LundPlane/tags/2.0.3/example_dpsi_collinear.cc
___________________________________________________________________
Added: svn:keywords
## -0,0 +1 ##
+Id
\ No newline at end of property
Index: contrib/contribs/LundPlane/tags/2.0.3/example_secondary.cc
===================================================================
--- contrib/contribs/LundPlane/tags/2.0.3/example_secondary.cc (revision 0)
+++ contrib/contribs/LundPlane/tags/2.0.3/example_secondary.cc (revision 1345)
@@ -0,0 +1,117 @@
+//----------------------------------------------------------------------
+/// \file example_secondary.cc
+///
+/// This example program is meant to illustrate how the
+/// fastjet::contrib::LundWithSecondary class is used.
+///
+/// Run this example with
+///
+/// \verbatim
+/// ./example_secondary < ../data/single-event.dat
+/// \endverbatim
+
+//----------------------------------------------------------------------
+// $Id$
+//
+// Copyright (c) 2018-, Frederic A. Dreyer, Keith Hamilton, Alexander Karlberg,
+// Gavin P. Salam, Ludovic Scyboz, Gregory Soyez, Rob Verheyen
+//
+//----------------------------------------------------------------------
+// This file is part of FastJet contrib.
+//
+// It is free software; you can redistribute it and/or modify it under
+// the terms of the GNU General Public License as published by the
+// Free Software Foundation; either version 2 of the License, or (at
+// your option) any later version.
+//
+// It is distributed in the hope that it will be useful, but WITHOUT
+// ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+// or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
+// License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this code. If not, see <http://www.gnu.org/licenses/>.
+//----------------------------------------------------------------------
+
+#include <iostream>
+#include <fstream>
+#include <sstream>
+
+#include "fastjet/PseudoJet.hh"
+#include <string>
+#include "LundWithSecondary.hh" // In external code, this should be fastjet/contrib/LundWithSecondary.hh
+using namespace std;
+using namespace fastjet;
+
+// forward declaration to make things clearer
+void read_event(vector<PseudoJet> &event);
+
+//----------------------------------------------------------------------
+int main(){
+
+ //----------------------------------------------------------
+ // read in input particles
+ vector<PseudoJet> event;
+ read_event(event);
+ cout << "# read an event with " << event.size() << " particles" << endl;
+
+ // first get some anti-kt jets
+ double R = 1.0, ptmin = 100.0;
+ JetDefinition jet_def(antikt_algorithm, R);
+ ClusterSequence cs(event, jet_def);
+ vector<PseudoJet> jets = sorted_by_pt(cs.inclusive_jets(ptmin));
+
+ //----------------------------------------------------------
+ // create an instance of LundWithSecondary, with default options
+ contrib::SecondaryLund_mMDT secondary;
+ contrib::LundWithSecondary lund(&secondary);
+
+ cout << lund.description() << endl;
+
+ for (unsigned ijet = 0; ijet < jets.size(); ijet++) {
+ cout << endl << "Lund coordinates ( ln 1/Delta, ln kt ) of declusterings of jet "
+ << ijet << " are:" << endl;
+ vector<contrib::LundDeclustering> declusts = lund.primary(jets[ijet]);
+
+ for (int idecl = 0; idecl < declusts.size(); idecl++) {
+ pair<double,double> coords = declusts[idecl].lund_coordinates();
+ cout << "["<< idecl<< "](" << coords.first << ", " << coords.second << ")";
+ if (idecl < declusts.size() - 1) cout << "; ";
+ }
+
+ cout << endl;
+
+ vector<contrib::LundDeclustering> sec_declusts = lund.secondary(declusts);
+ cout << endl << "with Lund coordinates for the secondary plane (from primary declustering ["
+ << lund.secondary_index(declusts) <<"]):" << endl;
+ for (int idecl = 0; idecl < sec_declusts.size(); ++idecl) {
+ pair<double,double> coords = sec_declusts[idecl].lund_coordinates();
+ cout << "["<< idecl<< "](" << coords.first << ", " << coords.second << ")";
+ if (idecl < sec_declusts.size() - 1) cout << "; ";
+ }
+
+ cout << endl;
+ }
+
+
+
+ return 0;
+}
+
+// read in input particles
+void read_event(vector<PseudoJet> &event){
+ string line;
+ while (getline(cin, line)) {
+ istringstream linestream(line);
+ // take substrings to avoid problems when there is extra "pollution"
+ // characters (e.g. line-feed).
+ if (line.substr(0,4) == "#END") {return;}
+ if (line.substr(0,1) == "#") {continue;}
+ double px,py,pz,E;
+ linestream >> px >> py >> pz >> E;
+ PseudoJet particle(px,py,pz,E);
+
+ // push event onto back of full_event vector
+ event.push_back(particle);
+ }
+}
Property changes on: contrib/contribs/LundPlane/tags/2.0.3/example_secondary.cc
___________________________________________________________________
Added: svn:keywords
## -0,0 +1 ##
+Id
\ No newline at end of property
Index: contrib/contribs/LundPlane/tags/2.0.3/ChangeLog
===================================================================
--- contrib/contribs/LundPlane/tags/2.0.3/ChangeLog (revision 0)
+++ contrib/contribs/LundPlane/tags/2.0.3/ChangeLog (revision 1345)
@@ -0,0 +1,115 @@
+2022-10-04 Tue <gavin.salam@physics.ox.ac.uk> + Ludo Scyboz
+
+ * VERSION:
+ * NEWS:
+ prepared for release 2.0.3
+
+ * EEHelpers.hh -> LundEEHelpers.hh:
+ EEHelpers.hh was not being installed; given that it's a potentially
+ common name, renamed it before including among the installation
+ targets.
+
+ Also placed whole contents in a new contrib::lund_plane namespace,
+ because of certain potentially common names like cross_product
+
+ * Makefile:
+ replaced EEHelpers.hh -> LundEEHelpers.hh and made sure that
+ LundEEHelpers.hh gets installed (without which RecursiveLundEEGenerator.hh
+ cannot be used)
+
+ * example_dpsi_collinear.cc:
+ * example_dpsi_slice.cc:
+ use of things from LundEEHelpers.hh updated to use of new namespace
+
+ * RecursiveLundEEGenerator.hh:
+ * RecursiveLundEEGenerator.cc:
+ updated to use LundEEHelpers.hh (and associated namespace);
+ also added a (protected) default constructor to LundEEDeclustering
+
+2022-08-20 Gavin Salam <gavin.salam@physics.ox.ac.uk>
+
+ * VERSION:
+ * NEWS:
+ prepared for release 2.0.2
+
+ * Makefile:
+ updated some dependencies
+
+ * EEHelpers.hh:
+ added #include <limits>, as per request from Andy Buckley
+ for compilation with g++-12 on some systems
+
+2021-12-06 Gavin Salam <gavin.salam@physics.ox.ac.uk>
+
+ * NEWS:
+ * VERSION:
+ prepared for release 2.0.1
+
+ * AUTHORS:
+ fixed missing names and publication info
+
+2021-12-06 Gregory Soyez <soyez@fastjet.fr>
+
+ * SecondaryLund.cc:
+ fixed int v. unsigned int in loop over vector indices
+
+2021-12-06 Gavin Salam <gavin.salam@physics.ox.ac.uk>
+
+ * example.py:
+ fixed name of executable in comments about how to execute
+ this (thanks to Matteo Cacciari)
+
+2021-11-09 Ludovic Scyboz <ludovic.scyboz@physics.ox.ac.uk>
+
+ * VERSION:
+ preparing for release of 2.0.0
+
+ * RecursiveLundEEGenerator.hh:
+ * RecursiveLundEEGenerator.cc:
+ class for recursive Lund declustering in e+e-
+ * example_dpsi_collinear.cc:
+ spin-sensitive collinear observable from 2103.16526
+ * example_dpsi_slice.cc:
+ spin-sensitive non-global observable from 2111.01161
+
+2020-02-23 Gavin Salam <gavin.salam@cern.ch>
+
+ * NEWS:
+ * VERSION:
+ preparing for release of 1.0.3
+
+ * example.cc:
+ changed outfile open(filename) to outfile.open(filename.c_str());
+ to attempt to solve issue reported by Steven Schramm.
+
+2018-10-26 Gavin Salam <gavin.salam@cern.ch>
+
+ * read_lund_json.py:
+ removed extraneous normalisation of zeroth bin in
+ the LundImage class.
+ Added documentation.
+
+
+2018-08-30 Gavin Salam <gavin.salam@cern.ch>
+
+ * VERSION:
+ * NEWS:
+
+ Release of version 1.0.1
+
+2018-08-23 Gavin Salam <gavin.salam@cern.ch>
+
+ * LundWithSecondary.hh:
+ * LundWithSecondary.cc:
+ added secondary_index(...), removed virtual qualifier from various
+ functions
+
+ * example_secondary.cc:
+ * example_secondary.ref:
+ example now prints out index of the primary declustering being
+ used for the secondary. Referemce file updated accordingly.
+
+2018-08-09 Frédéric Dreyer <fdreyer@mit.edu>
+
+ First version of LundPlane.
+
Index: contrib/contribs/LundPlane/tags/2.0.3/LundJSON.hh
===================================================================
--- contrib/contribs/LundPlane/tags/2.0.3/LundJSON.hh (revision 0)
+++ contrib/contribs/LundPlane/tags/2.0.3/LundJSON.hh (revision 1345)
@@ -0,0 +1,78 @@
+#ifndef __FASTJET_CONTRIB_LUNDJSON_HH__
+#define __FASTJET_CONTRIB_LUNDJSON_HH__
+
+#include "LundGenerator.hh"
+
+FASTJET_BEGIN_NAMESPACE
+
+namespace contrib{
+
+// declaration of helper function
+void lund_elements_to_json(std::ostream & ostr, const LundDeclustering & d);
+
+/// writes json to ostr for an individual declustering
+inline std::ostream & lund_to_json(std::ostream & ostr, const LundDeclustering & d) {
+ // /// we hardcode 6 digits of precision -- is this the right way to do things?
+ // int prec_store = ostr.precision();
+ // ostr.precision(6);
+
+ ostr << "{";
+ lund_elements_to_json(ostr, d);
+ ostr << "}";
+
+ return ostr;
+}
+
+
+/// writes json to ostr for a vector of declusterings
+inline std::ostream & lund_to_json(std::ostream & ostr, const std::vector<LundDeclustering> & d) {
+ ostr << "[";
+ for (std::size_t i = 0; i < d.size(); i++) {
+ if (i != 0) ostr << ",";
+ lund_to_json(ostr, d[i]);
+ }
+ ostr << "]";
+ return ostr;
+}
+
+// /// writes a full Lund tree recursively to JSON
+// inline std::ostream & lund_to_json(std::ostream & ostr, const LundGenerator & generator, const PseudoJet & jet) {
+// // we will use these below in the loop; declare them here to avoid
+// // repeated creation/destruction
+// PseudoJet p1,p2;
+// std::vector<LundDeclustering> d = generator(jet);
+// ostr << "[";
+// for (std::size_t i = 0; i < d.size(); i++) {
+// if (i != 0) ostr << ",";
+// ostr << "{";
+// lund_elements_to_json(ostr, d[i]);
+// // add in information on the leaf if it exists
+// if (d[i].softer().has_parents(p1,p2)) {
+// ostr << ",";
+// ostr << "\"leaf\":";
+// lund_to_json(ostr, generator, d[i].softer());
+// }
+// ostr << "}";
+// }
+// ostr << "]";
+// return ostr;
+// }
+
+// helper function to write individual elements to json
+inline void lund_elements_to_json(std::ostream & ostr, const LundDeclustering & d) {
+ ostr << "\"p_pt\":" << d.pair() .pt() << ",";
+ ostr << "\"p_m\":" << d.pair() .m () << ",";
+ ostr << "\"h_pt\":" << d.harder().pt() << ",";
+ ostr << "\"s_pt\":" << d.softer().pt() << ",";
+ ostr << "\"z\":" << d.z() << ",";
+ ostr << "\"Delta\":" << d.Delta() << ",";
+ ostr << "\"kt\":" << d.kt() << ",";
+ ostr << "\"psi\":" << d.psi() ;
+}
+
+
+} // namespace contrib
+
+FASTJET_END_NAMESPACE
+
+#endif // __FASTJET_CONTRIB_LUNDJSON_HH__
Property changes on: contrib/contribs/LundPlane/tags/2.0.3/LundJSON.hh
___________________________________________________________________
Added: svn:keywords
## -0,0 +1 ##
+Id
\ No newline at end of property
Index: contrib/contribs/LundPlane/tags/2.0.3/LundWithSecondary.cc
===================================================================
--- contrib/contribs/LundPlane/tags/2.0.3/LundWithSecondary.cc (revision 0)
+++ contrib/contribs/LundPlane/tags/2.0.3/LundWithSecondary.cc (revision 1345)
@@ -0,0 +1,78 @@
+// $Id$
+//
+// Copyright (c) 2018-, Frederic A. Dreyer, Keith Hamilton, Alexander Karlberg,
+// Gavin P. Salam, Ludovic Scyboz, Gregory Soyez, Rob Verheyen
+//
+//----------------------------------------------------------------------
+// This file is part of FastJet contrib.
+//
+// It is free software; you can redistribute it and/or modify it under
+// the terms of the GNU General Public License as published by the
+// Free Software Foundation; either version 2 of the License, or (at
+// your option) any later version.
+//
+// It is distributed in the hope that it will be useful, but WITHOUT
+// ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+// or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
+// License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this code. If not, see <http://www.gnu.org/licenses/>.
+//----------------------------------------------------------------------
+
+#include "LundWithSecondary.hh"
+#include <sstream>
+
+FASTJET_BEGIN_NAMESPACE // defined in fastjet/internal/base.hh
+
+namespace contrib{
+
+//----------------------------------------------------------------------
+/// return LundDeclustering sequence of primary plane
+std::vector<LundDeclustering> LundWithSecondary::primary(const PseudoJet& jet) const {
+ return lund_gen_(jet);
+}
+
+//----------------------------------------------------------------------
+/// return LundDeclustering sequence of secondary plane (slow version)
+std::vector<LundDeclustering> LundWithSecondary::secondary(const PseudoJet& jet) const {
+ // this is not optimal as one is computing the primary plane twice.
+ std::vector<LundDeclustering> declusts = lund_gen_(jet);
+ return secondary(declusts);
+}
+//----------------------------------------------------------------------
+/// return LundDeclustering sequence of secondary plane with primary sequence as input
+std::vector<LundDeclustering> LundWithSecondary::secondary(
+ const std::vector<LundDeclustering> & declusts) const {
+
+ int sec_index = secondary_index(declusts);
+ // if we found the index of secondary emission, return its declustering sequence
+ if (sec_index >= 0) {
+ return lund_gen_(declusts[sec_index].softer());
+ } else {
+ return std::vector<LundDeclustering>();
+ }
+}
+
+//----------------------------------------------------------------------
+/// return the index associated of the primary declustering that is to be
+/// used for the secondary plane.
+int LundWithSecondary::secondary_index(const std::vector<LundDeclustering> & declusts) const {
+ if (secondary_def_ == 0) {
+ throw Error("secondary class is a null pointer, cannot identify element to use for secondary plane");
+ }
+ return (*secondary_def_)(declusts);
+}
+
+//----------------------------------------------------------------------
+/// description
+std::string LundWithSecondary::description() const {
+ std::ostringstream oss;
+ oss << "LundWithSecondary using " << secondary_def_->description()
+ << " and " << lund_gen_.description();
+ return oss.str();
+}
+
+} // namespace contrib
+
+FASTJET_END_NAMESPACE
Property changes on: contrib/contribs/LundPlane/tags/2.0.3/LundWithSecondary.cc
___________________________________________________________________
Added: svn:keywords
## -0,0 +1 ##
+Id
\ No newline at end of property
Index: contrib/contribs/LundPlane/tags/2.0.3/LundEEHelpers.hh
===================================================================
--- contrib/contribs/LundPlane/tags/2.0.3/LundEEHelpers.hh (revision 0)
+++ contrib/contribs/LundPlane/tags/2.0.3/LundEEHelpers.hh (revision 1345)
@@ -0,0 +1,265 @@
+// $Id$
+//
+// Copyright (c) 2018-, Frederic A. Dreyer, Keith Hamilton, Alexander Karlberg,
+// Gavin P. Salam, Ludovic Scyboz, Gregory Soyez, Rob Verheyen
+//
+// This file is part of FastJet contrib.
+//
+// It is free software; you can redistribute it and/or modify it under
+// the terms of the GNU General Public License as published by the
+// Free Software Foundation; either version 2 of the License, or (at
+// your option) any later version.
+//
+// It is distributed in the hope that it will be useful, but WITHOUT
+// ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+// or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
+// License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this code. If not, see <http://www.gnu.org/licenses/>.
+//----------------------------------------------------------------------
+
+#ifndef __FASTJET_CONTRIB_EEHELPERS_HH__
+#define __FASTJET_CONTRIB_EEHELPERS_HH__
+
+#include "fastjet/PseudoJet.hh"
+#include <array>
+#include <limits>
+
+FASTJET_BEGIN_NAMESPACE
+
+namespace contrib{
+namespace lund_plane {
+
+//----------------------------------------------------------------------
+/// Returns the 3-vector cross-product of p1 and p2. If lightlike is false
+/// then the energy component is zero; if it's true the the energy component
+/// is arranged so that the vector is lighlike
+inline PseudoJet cross_product(const PseudoJet & p1, const PseudoJet & p2, bool lightlike=false) {
+ double px = p1.py() * p2.pz() - p2.py() * p1.pz();
+ double py = p1.pz() * p2.px() - p2.pz() * p1.px();
+ double pz = p1.px() * p2.py() - p2.px() * p1.py();
+
+ double E;
+ if (lightlike) {
+ E = sqrt(px*px + py*py + pz*pz);
+ } else {
+ E = 0.0;
+ }
+ return PseudoJet(px, py, pz, E);
+}
+
+/// Map angles to [-pi, pi]
+inline const double map_to_pi(const double &phi) {
+ if (phi < -M_PI) return phi + 2 * M_PI;
+ else if (phi > M_PI) return phi - 2 * M_PI;
+ else return phi;
+}
+
+inline double dot_product_3d(const PseudoJet & a, const PseudoJet & b) {
+ return a.px()*b.px() + a.py()*b.py() + a.pz()*b.pz();
+}
+
+/// Returns (1-cos theta) where theta is the angle between p1 and p2
+inline double one_minus_costheta(const PseudoJet & p1, const PseudoJet & p2) {
+
+ if (p1.m2() == 0 && p2.m2() == 0) {
+ // use the 4-vector dot product.
+ // For massless particles it gives us E1*E2*(1-cos theta)
+ return dot_product(p1,p2) / (p1.E() * p2.E());
+ } else {
+ double p1mod = p1.modp();
+ double p2mod = p2.modp();
+ double p1p2mod = p1mod*p2mod;
+ double dot = dot_product_3d(p1,p2);
+
+ if (dot > (1-std::numeric_limits<double>::epsilon()) * p1p2mod) {
+ PseudoJet cross_result = cross_product(p1, p2, false);
+ // the mass^2 of cross_result is equal to
+ // -(px^2 + py^2 + pz^2) = (p1mod*p2mod*sintheta_ab)^2
+ // so we can get
+ return -cross_result.m2()/(p1p2mod * (p1p2mod+dot));
+ }
+
+ return 1.0 - dot/p1p2mod;
+
+ }
+}
+
+// Get the angle between two planes defined by normalized vectors
+// n1, n2. The sign is decided by the direction of a vector n.
+inline double signed_angle_between_planes(const PseudoJet& n1,
+ const PseudoJet& n2, const PseudoJet& n) {
+
+ // Two vectors passed as arguments should be normalised to 1.
+ assert(fabs(n1.modp()-1) < sqrt(std::numeric_limits<double>::epsilon()) && fabs(n2.modp()-1) < sqrt(std::numeric_limits<double>::epsilon()));
+
+ double omcost = one_minus_costheta(n1,n2);
+ double theta;
+
+ // If theta ~ pi, we return pi.
+ if(fabs(omcost-2) < sqrt(std::numeric_limits<double>::epsilon())) {
+ theta = M_PI;
+ } else if (omcost > sqrt(std::numeric_limits<double>::epsilon())) {
+ double cos_theta = 1.0 - omcost;
+ theta = acos(cos_theta);
+ } else {
+ // we are at small angles, so use small-angle formulas
+ theta = sqrt(2. * omcost);
+ }
+
+ PseudoJet cp = cross_product(n1,n2);
+ double sign = dot_product_3d(cp,n);
+
+ if (sign > 0) return theta;
+ else return -theta;
+}
+
+class Matrix3 {
+public:
+ /// constructs an empty matrix
+ Matrix3() : matrix_({{{{0,0,0}}, {{0,0,0}}, {{0,0,0}}}}) {}
+
+ /// constructs a diagonal matrix with "unit" along each diagonal entry
+ Matrix3(double unit) : matrix_({{{{unit,0,0}}, {{0,unit,0}}, {{0,0,unit}}}}) {}
+
+ /// constructs a matrix from the array<array<...,3>,3> object
+ Matrix3(const std::array<std::array<double,3>,3> & mat) : matrix_(mat) {}
+
+ /// returns the entry at row i, column j
+ inline double operator()(int i, int j) const {
+ return matrix_[i][j];
+ }
+
+ /// returns a matrix for carrying out azimuthal rotation
+ /// around the z direction by an angle phi
+ static Matrix3 azimuthal_rotation(double phi) {
+ double cos_phi = cos(phi);
+ double sin_phi = sin(phi);
+ Matrix3 phi_rot( {{ {{cos_phi, sin_phi, 0}},
+ {{-sin_phi, cos_phi, 0}},
+ {{0,0,1}}}});
+ return phi_rot;
+ }
+
+ /// returns a matrix for carrying out a polar-angle
+ /// rotation, in the z-x plane, by an angle theta
+ static Matrix3 polar_rotation(double theta) {
+ double cos_theta = cos(theta);
+ double sin_theta = sin(theta);
+ Matrix3 theta_rot( {{ {{cos_theta, 0, sin_theta}},
+ {{0,1,0}},
+ {{-sin_theta, 0, cos_theta}}}});
+ return theta_rot;
+ }
+
+ /// This provides a rotation matrix that takes the z axis to the
+ /// direction of p. With skip_pre_rotation = false (the default), it
+ /// has the characteristic that if p is close to the z axis then the
+ /// azimuthal angle of anything at much larger angle is conserved.
+ ///
+ /// If skip_pre_rotation is true, then the azimuthal angles are not
+ /// when p is close to the z axis.
+ template<class T>
+ static Matrix3 from_direction(const T & p, bool skip_pre_rotation = false) {
+ double pt = p.pt();
+ double modp = p.modp();
+ double cos_theta = p.pz() / modp;
+ double sin_theta = pt / modp;
+ double cos_phi, sin_phi;
+ if (pt > 0.0) {
+ cos_phi = p.px()/pt;
+ sin_phi = p.py()/pt;
+ } else {
+ cos_phi = 1.0;
+ sin_phi = 0.0;
+ }
+
+ Matrix3 phi_rot({{ {{ cos_phi,-sin_phi, 0 }},
+ {{ sin_phi, cos_phi, 0 }},
+ {{ 0, 0, 1 }} }});
+ Matrix3 theta_rot( {{ {{ cos_theta, 0, sin_theta }},
+ {{ 0, 1, 0 }},
+ {{-sin_theta, 0, cos_theta }} }});
+
+ // since we have orthogonal matrices, the inverse and transpose
+ // are identical; we use the transpose for the frontmost rotation
+ // because
+ if (skip_pre_rotation) {
+ return phi_rot * theta_rot;
+ } else {
+ return phi_rot * (theta_rot * phi_rot.transpose());
+ }
+ }
+
+ template<class T>
+ static Matrix3 from_direction_no_pre_rotn(const T & p) {
+ return from_direction(p,true);
+ }
+
+
+
+ /// returns the transposed matrix
+ Matrix3 transpose() const {
+ // 00 01 02
+ // 10 11 12
+ // 20 21 22
+ Matrix3 result = *this;
+ std::swap(result.matrix_[0][1],result.matrix_[1][0]);
+ std::swap(result.matrix_[0][2],result.matrix_[2][0]);
+ std::swap(result.matrix_[1][2],result.matrix_[2][1]);
+ return result;
+ }
+
+ // returns the product with another matrix
+ Matrix3 operator*(const Matrix3 & other) const {
+ Matrix3 result;
+ // r_{ij} = sum_k this_{ik} & other_{kj}
+ for (int i = 0; i < 3; i++) {
+ for (int j = 0; j < 3; j++) {
+ for (int k = 0; k < 3; k++) {
+ result.matrix_[i][j] += this->matrix_[i][k] * other.matrix_[k][j];
+ }
+ }
+ }
+ return result;
+ }
+
+ friend std::ostream & operator<<(std::ostream & ostr, const Matrix3 & mat);
+private:
+ std::array<std::array<double,3>,3> matrix_;
+};
+
+inline std::ostream & operator<<(std::ostream & ostr, const Matrix3 & mat) {
+ ostr << mat.matrix_[0][0] << " " << mat.matrix_[0][1] << " " << mat.matrix_[0][2] << std::endl;
+ ostr << mat.matrix_[1][0] << " " << mat.matrix_[1][1] << " " << mat.matrix_[1][2] << std::endl;
+ ostr << mat.matrix_[2][0] << " " << mat.matrix_[2][1] << " " << mat.matrix_[2][2] << std::endl;
+ return ostr;
+}
+
+/// returns the project of this matrix with the PseudoJet,
+/// maintaining the 4th component of the PseudoJet unchanged
+inline PseudoJet operator*(const Matrix3 & mat, const PseudoJet & p) {
+ // r_{i} = m_{ij} p_j
+ std::array<double,3> res3{{0,0,0}};
+ for (unsigned i = 0; i < 3; i++) {
+ for (unsigned j = 0; j < 3; j++) {
+ res3[i] += mat(i,j) * p[j];
+ }
+ }
+ // return a jet that maintains all internal pointers by
+ // initialising the result from the input jet and
+ // then resetting the momentum.
+ PseudoJet result(p);
+ // maintain the energy component as it was
+ result.reset_momentum(res3[0], res3[1], res3[2], p[3]);
+ return result;
+}
+
+} // namespace lund_plane
+} // namespace contrib
+
+FASTJET_END_NAMESPACE
+
+#endif // __FASTJET_CONTRIB_EEHELPERS_HH__
+
Property changes on: contrib/contribs/LundPlane/tags/2.0.3/LundEEHelpers.hh
___________________________________________________________________
Added: svn:keywords
## -0,0 +1 ##
+Id
\ No newline at end of property
Index: contrib/contribs/LundPlane/tags/2.0.3/LundGenerator.cc
===================================================================
--- contrib/contribs/LundPlane/tags/2.0.3/LundGenerator.cc (revision 0)
+++ contrib/contribs/LundPlane/tags/2.0.3/LundGenerator.cc (revision 1345)
@@ -0,0 +1,76 @@
+// $Id$
+//
+// Copyright (c) 2018-, Frederic A. Dreyer, Keith Hamilton, Alexander Karlberg,
+// Gavin P. Salam, Ludovic Scyboz, Gregory Soyez, Rob Verheyen
+//
+//----------------------------------------------------------------------
+// This file is part of FastJet contrib.
+//
+// It is free software; you can redistribute it and/or modify it under
+// the terms of the GNU General Public License as published by the
+// Free Software Foundation; either version 2 of the License, or (at
+// your option) any later version.
+//
+// It is distributed in the hope that it will be useful, but WITHOUT
+// ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+// or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
+// License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this code. If not, see <http://www.gnu.org/licenses/>.
+//----------------------------------------------------------------------
+
+#include <sstream>
+#include "LundGenerator.hh"
+
+FASTJET_BEGIN_NAMESPACE // defined in fastjet/internal/base.hh
+
+namespace contrib{
+
+LundDeclustering::LundDeclustering(const PseudoJet& pair,
+ const PseudoJet& j1, const PseudoJet& j2)
+ : m_(pair.m()), Delta_(j1.delta_R(j2)), pair_(pair) {
+
+ // establish which of j1 and j2 is softer
+ if (j1.pt2() > j2.pt2()) {
+ harder_ = j1;
+ softer_ = j2;
+ } else {
+ harder_ = j2;
+ softer_ = j1;
+ }
+
+ // now work out the various Lund declustering variables
+ double softer_pt = softer_.pt();
+ z_ = softer_pt / (softer_pt + harder_.pt());
+ kt_ = softer_pt * Delta_;
+ psi_ = atan2(softer_.rap()-harder_.rap(), harder_.delta_phi_to(softer_));
+ kappa_ = z_ * Delta_;
+}
+
+//----------------------------------------------------------------------
+/// retrieve the vector of declusterings of the primary plane of a jet
+std::vector<LundDeclustering> LundGenerator::result(const PseudoJet& jet) const {
+ std::vector<LundDeclustering> result;
+ PseudoJet j = recluster_(jet);
+ PseudoJet pair, j1, j2;
+ pair = j;
+ while (pair.has_parents(j1, j2)) {
+ if (j1.pt2() < j2.pt2()) std::swap(j1,j2);
+ result.push_back(LundDeclustering(pair, j1, j2));
+ pair = j1;
+ }
+ return result;
+}
+
+//----------------------------------------------------------------------
+/// description
+std::string LundGenerator::description() const {
+ std::ostringstream oss;
+ oss << "LundGenerator with " << recluster_.description();
+ return oss.str();
+}
+
+} // namespace contrib
+
+FASTJET_END_NAMESPACE
Property changes on: contrib/contribs/LundPlane/tags/2.0.3/LundGenerator.cc
___________________________________________________________________
Added: svn:keywords
## -0,0 +1 ##
+Id
\ No newline at end of property
Index: contrib/contribs/LundPlane/tags/2.0.3/README
===================================================================
--- contrib/contribs/LundPlane/tags/2.0.3/README (revision 0)
+++ contrib/contribs/LundPlane/tags/2.0.3/README (revision 1345)
@@ -0,0 +1,63 @@
+------------------------------------------------------------------------
+LundPlane FastJet contrib
+------------------------------------------------------------------------
+
+The LundPlane FastJet contrib provides tools necessary to construct
+the Lund Plane of a jet.
+
+It is based on arXiv:1807.04758 by Frederic Dreyer, Gavin Salam, and
+Gregory Soyez.
+
+Azimuthal-angle definitions are taken from arXiv:2103.16526, by
+Alexander Karlberg, Gavin Salam, Ludovic Scyboz and Rob Verheyen, and
+arXiv:2111.01161 by the authors above and Keith Hamilton.
+
+It provides the following C++ classes:
+
+- LundDeclustering
+ Contains the declustering variables associated with a node on
+ the Lund plane.
+
+- LundGenerator
+ A tool to generate a vector of LundDeclustering for a given jet
+ corresponding to its primary Lund plane.
+
+- RecursiveLundEEGenerator
+ A recursive tool to extract declusterings for a given jet in
+ e+e- collisions, i.e. its full Lund structure down to a user-given
+ depth
+
+- LundWithSecondary
+ A tool to generate primary, and secondary, lund planes of a jet
+ according to the definition given as input.
+
+- SecondaryLund, SecondaryLund_{mMDT|dotmMDT|Mass}
+ Provides a definition for the leading emission.
+
+There are four C++ examples which can be compiled with
+
+> make example example_secondary example_dpsi_collinear example_dpsi_slice
+
+The example program can be run using
+> ./example < ../data/single-event.dat
+
+and will output the primary lund plane declusterings as well as
+generating a jets.json file, which can be read by a python script:
+
+> python3 ./example.py
+
+Some python classes to assist with reading and processing the json file
+are provided in the read_lund_json.py module.
+
+The example_secondary program outputs both the primary and secondary
+Lund plane declusterings to screen, and can be run with:
+
+> ./example_secondary < ../data/single-event.dat
+
+The example_dpsi_collinear and example_dpsi_slice programs compute the
+contribution to the collinear azimuthal delta_psi observable from
+2103.16526, and to the slice observable delta_psi_slice from 2111.01161,
+respectively. They can be run with
+
+> ./example_dpsi_collinear < ../data/single-ee-event.dat
+> ./example_dpsi_slice < ../data/single-ee-event.dat
Index: contrib/contribs/LundPlane/tags/2.0.3/SecondaryLund.cc
===================================================================
--- contrib/contribs/LundPlane/tags/2.0.3/SecondaryLund.cc (revision 0)
+++ contrib/contribs/LundPlane/tags/2.0.3/SecondaryLund.cc (revision 1345)
@@ -0,0 +1,124 @@
+// $Id$
+//
+// Copyright (c) 2018-, Frederic A. Dreyer, Keith Hamilton, Alexander Karlberg,
+// Gavin P. Salam, Ludovic Scyboz, Gregory Soyez, Rob Verheyen
+//
+//----------------------------------------------------------------------
+// This file is part of FastJet contrib.
+//
+// It is free software; you can redistribute it and/or modify it under
+// the terms of the GNU General Public License as published by the
+// Free Software Foundation; either version 2 of the License, or (at
+// your option) any later version.
+//
+// It is distributed in the hope that it will be useful, but WITHOUT
+// ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+// or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
+// License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this code. If not, see <http://www.gnu.org/licenses/>.
+//----------------------------------------------------------------------
+
+#include "SecondaryLund.hh"
+#include <math.h>
+#include <sstream>
+#include <limits>
+
+
+FASTJET_BEGIN_NAMESPACE // defined in fastjet/internal/base.hh
+
+namespace contrib{
+
+//----------------------------------------------------------------------
+/// retrieve the vector of declusterings of the secondary plane of a jet
+int SecondaryLund_mMDT::result(const std::vector<LundDeclustering>& declusts) const {
+ // iterate through primary branchings
+ for (unsigned int i=0; i < declusts.size(); ++i) {
+ // mMDTZ: find the first emission passing z>zcut
+ if (declusts[i].z() > zcut_) return i;
+ }
+ return -1;
+}
+
+int SecondaryLund_dotmMDT::result(const std::vector<LundDeclustering>& declusts) const {
+ // set up leading emission pointer and bookkeeping variables
+ int secondary_index = -1;
+ double dot_prod_max = 0.0;
+
+ // iterate through primary branchings
+ for (unsigned int i=0; i < declusts.size(); ++i) {
+ // dotmMDTZ: find emission passing z>zcut with largest dot product
+ if (declusts[i].z() > zcut_) {
+ double dot_prod = declusts[i].harder().pt()*declusts[i].softer().pt()
+ *declusts[i].Delta()*declusts[i].Delta();
+ if (dot_prod > dot_prod_max) {
+ dot_prod_max = dot_prod;
+ secondary_index = i;
+ }
+ }
+ }
+
+ // return index of secondary emission
+ return secondary_index;
+}
+
+
+int SecondaryLund_Mass::result(const std::vector<LundDeclustering>& declusts) const {
+ // set up leading emission pointer and bookkeeping variables
+ int secondary_index = -1;
+ double mass_diff = std::numeric_limits<double>::max();
+
+ // iterate through primary branchings
+ for (unsigned int i=0; i < declusts.size(); ++i) {
+ // Mass: find emission that minimises the distance to reference mass
+ double dist =
+ std::abs(log(declusts[i].harder().pt()*declusts[i].softer().pt()
+ * declusts[i].Delta()*declusts[i].Delta() / mref2_)
+ * log(1.0/declusts[i].z()));
+ if (dist < mass_diff) {
+ mass_diff = dist;
+ secondary_index = i;
+ }
+ }
+
+ // return index of secondary emission
+ return secondary_index;
+}
+
+
+//----------------------------------------------------------------------
+/// description
+std::string SecondaryLund::description() const {
+ std::ostringstream oss;
+ oss << "SecondaryLund";
+ return oss.str();
+}
+
+//----------------------------------------------------------------------
+/// description
+std::string SecondaryLund_mMDT::description() const {
+ std::ostringstream oss;
+ oss << "SecondaryLund (mMDT selection of leading emission, zcut=" << zcut_<<")";
+ return oss.str();
+}
+
+//----------------------------------------------------------------------
+/// description
+std::string SecondaryLund_dotmMDT::description() const {
+ std::ostringstream oss;
+ oss << "SecondaryLund (dotmMDT selection of leading emission, zcut=" << zcut_<<")";
+ return oss.str();
+}
+
+//----------------------------------------------------------------------
+/// description
+std::string SecondaryLund_Mass::description() const {
+ std::ostringstream oss;
+ oss << " (Mass selection of leading emission, m="<<sqrt(mref2_)<<")";
+ return oss.str();
+}
+
+} // namespace contrib
+
+FASTJET_END_NAMESPACE
Property changes on: contrib/contribs/LundPlane/tags/2.0.3/SecondaryLund.cc
___________________________________________________________________
Added: svn:keywords
## -0,0 +1 ##
+Id
\ No newline at end of property
Index: contrib/contribs/LundPlane/tags/2.0.3/RecursiveLundEEGenerator.cc
===================================================================
--- contrib/contribs/LundPlane/tags/2.0.3/RecursiveLundEEGenerator.cc (revision 0)
+++ contrib/contribs/LundPlane/tags/2.0.3/RecursiveLundEEGenerator.cc (revision 1345)
@@ -0,0 +1,88 @@
+// $Id$
+//
+// Copyright (c) 2018-, Frederic A. Dreyer, Keith Hamilton, Alexander Karlberg,
+// Gavin P. Salam, Ludovic Scyboz, Gregory Soyez, Rob Verheyen
+//
+//----------------------------------------------------------------------
+// This file is part of FastJet contrib.
+//
+// It is free software; you can redistribute it and/or modify it under
+// the terms of the GNU General Public License as published by the
+// Free Software Foundation; either version 2 of the License, or (at
+// your option) any later version.
+//
+// It is distributed in the hope that it will be useful, but WITHOUT
+// ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+// or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
+// License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this code. If not, see <http://www.gnu.org/licenses/>.
+//----------------------------------------------------------------------
+
+#include <sstream>
+#include "RecursiveLundEEGenerator.hh"
+
+using namespace std;
+
+FASTJET_BEGIN_NAMESPACE
+
+namespace contrib{
+
+using namespace lund_plane;
+
+LundEEDeclustering::LundEEDeclustering(const PseudoJet& pair,
+ const PseudoJet& j1, const PseudoJet& j2,
+ int iplane, double psi, double psibar,
+ int depth, int leaf_iplane, int sign_s)
+ : iplane_(iplane), psi_(psi), psibar_(psibar), m_(pair.m()), pair_(pair), depth_(depth), leaf_iplane_(leaf_iplane), sign_s_(sign_s) {
+
+ double omc = one_minus_costheta(j1,j2);
+
+ if (omc > sqrt(numeric_limits<double>::epsilon())) {
+ double cos_theta = 1.0 - omc;
+ double theta = acos(cos_theta);
+ sin_theta_ = sin(theta);
+ eta_ = -log(tan(theta/2.0));
+ } else {
+ // we are at small angles, so use small-angle formulas
+ double theta = sqrt(2. * omc);
+ sin_theta_ = theta;
+ eta_ = -log(theta/2);
+ }
+
+ // establish which of j1 and j2 is softer
+ if (j1.modp2() > j2.modp2()) {
+ harder_ = j1;
+ softer_ = j2;
+ } else {
+ harder_ = j2;
+ softer_ = j1;
+ }
+
+ // now work out the various LundEE declustering variables
+ double softer_modp = softer_.modp();
+ z_ = softer_modp / (softer_modp + harder_.modp());
+ kt_ = softer_modp * sin_theta_;
+ lnkt_ = log(kt_);
+ kappa_ = z_ * sin_theta_;
+}
+
+} // namespace contrib
+
+
+FASTJET_END_NAMESPACE
+
+std::ostream & operator<<(std::ostream & ostr, const fastjet::contrib::LundEEDeclustering & d) {
+ ostr << "kt = " << d.kt()
+ << " z = " << d.z()
+ << " eta = " << d.eta()
+ << " psi = " << d.psi()
+ << " psibar = " << d.psibar()
+ << " m = " << d.m()
+ << " iplane = " << d.iplane()
+ << " depth = " << d.depth()
+ << " leaf_iplane = " << d.leaf_iplane();
+ return ostr;
+}
+
Property changes on: contrib/contribs/LundPlane/tags/2.0.3/RecursiveLundEEGenerator.cc
___________________________________________________________________
Added: svn:keywords
## -0,0 +1 ##
+Id
\ No newline at end of property
Index: contrib/contribs/LundPlane/tags/2.0.3/example_dpsi_slice.ref
===================================================================
--- contrib/contribs/LundPlane/tags/2.0.3/example_dpsi_slice.ref (revision 0)
+++ contrib/contribs/LundPlane/tags/2.0.3/example_dpsi_slice.ref (revision 1345)
@@ -0,0 +1,19 @@
+# read an event with 70 particles
+#--------------------------------------------------------------------------
+# FastJet release 3.3.2
+# M. Cacciari, G.P. Salam and G. Soyez
+# A software package for jet finding and analysis at colliders
+# http://fastjet.fr
+#
+# Please cite EPJC72(2012)1896 [arXiv:1111.6097] if you use this package
+# for scientific work and optionally PLB641(2006)57 [hep-ph/0512210].
+#
+# FastJet is provided without warranty under the terms of the GNU GPLv2.
+# It uses T. Chan's closest pair algorithm, S. Fortune's Voronoi code
+# and 3rd party plugin jet algorithms. See COPYING file for details.
+#--------------------------------------------------------------------------
+Primary in the central slice, with Lund coordinates ( ln 1/Delta, ln kt, psibar ):
+index [0](0.461518, 2.74826, 2.32912)
+
+with Lund coordinates for the (highest-kT) secondary plane that passes the zcut of 0.1
+index [0](0.860316, 1.51421, -2.65024) --> delta_psi,slice = 1.30383
Index: contrib/contribs/LundPlane/tags/2.0.3/LundWithSecondary.hh
===================================================================
--- contrib/contribs/LundPlane/tags/2.0.3/LundWithSecondary.hh (revision 0)
+++ contrib/contribs/LundPlane/tags/2.0.3/LundWithSecondary.hh (revision 1345)
@@ -0,0 +1,126 @@
+// $Id$
+//
+// Copyright (c) 2018-, Frederic A. Dreyer, Keith Hamilton, Alexander Karlberg,
+// Gavin P. Salam, Ludovic Scyboz, Gregory Soyez, Rob Verheyen
+//
+//----------------------------------------------------------------------
+// This file is part of FastJet contrib.
+//
+// It is free software; you can redistribute it and/or modify it under
+// the terms of the GNU General Public License as published by the
+// Free Software Foundation; either version 2 of the License, or (at
+// your option) any later version.
+//
+// It is distributed in the hope that it will be useful, but WITHOUT
+// ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+// or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
+// License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this code. If not, see <http://www.gnu.org/licenses/>.
+//----------------------------------------------------------------------
+
+#ifndef __FASTJET_CONTRIB_LUNDWITHSECONDARY_HH__
+#define __FASTJET_CONTRIB_LUNDWITHSECONDARY_HH__
+
+#include "LundGenerator.hh"
+#include "SecondaryLund.hh"
+
+FASTJET_BEGIN_NAMESPACE
+
+namespace contrib{
+
+//----------------------------------------------------------------------
+/// \class LundWithSecondary
+/// Define a primary and secondary Lund plane
+///
+/// \param secondary_def definition used for the leading emission.
+//
+class LundWithSecondary {
+public:
+ /// LundWithSecondary constructor
+ LundWithSecondary(SecondaryLund * secondary_def = 0)
+ : secondary_def_(secondary_def) {}
+
+ /// LundWithSecondary constructor with jet alg
+ LundWithSecondary(JetAlgorithm jet_alg,
+ SecondaryLund * secondary_def = 0)
+ : lund_gen_(jet_alg), secondary_def_(secondary_def) {}
+
+ /// LundWithSecondary constructor with jet def
+ LundWithSecondary(const JetDefinition & jet_def,
+ SecondaryLund * secondary_def = 0)
+ : lund_gen_(jet_def), secondary_def_(secondary_def) {}
+
+ /// destructor
+ virtual ~LundWithSecondary() {}
+
+ /// primary Lund declustering
+ std::vector<LundDeclustering> primary(const PseudoJet& jet) const;
+
+ /// secondary Lund declustering (slow)
+ std::vector<LundDeclustering> secondary(const PseudoJet& jet) const;
+
+ /// secondary Lund declustering with primary sequence as input
+ std::vector<LundDeclustering> secondary(
+ const std::vector<LundDeclustering> & declusts) const;
+
+ /// return the index associated of the primary declustering that is to be
+ /// used for the secondary plane.
+ int secondary_index(const std::vector<LundDeclustering> & declusts) const;
+
+ /// description of the class
+ std::string description() const;
+
+private:
+ /// lund generator
+ LundGenerator lund_gen_;
+
+ /// secondary definition
+ SecondaryLund * secondary_def_;
+};
+
+
+// //----------------------------------------------------------------------
+// /// \class LundWithSecondaryAndTertiary
+// /// Define a primary, secondary and tertiary Lund plane
+// class LundWithSecondaryAndTertiary : public LundWithSecondary {
+// public:
+// /// LundWithSecondaryAndTertiary constructor
+// LundWithSecondaryAndTertiary(SecondaryLund * secondary_def = 0,
+// SecondaryLund * tertiary_def = 0)
+// : LundWithSecondary(secondary_def), tertiary_def_(tertiary_def) {}
+
+// /// LundWithSecondaryAndTertiary constructor with jet alg
+// LundWithSecondaryAndTertiary(JetAlgorithm jet_alg,
+// SecondaryLund * secondary_def = 0,
+// SecondaryLund * tertiary_def = 0)
+// : LundWithSecondary(jet_alg, secondary_def), tertiary_def_(tertiary_def) {}
+
+// /// LundWithSecondaryAndTertiary constructor with jet def
+// LundWithSecondaryAndTertiary(const JetDefinition & jet_def,
+// SecondaryLund * secondary_def = 0,
+// SecondaryLund * tertiary_def = 0)
+// : LundWithSecondary(jet_def, secondary_def), tertiary_def_(tertiary_def) {}
+
+// /// destructor
+// virtual ~LundWithSecondaryAndTertiary() {}
+
+// /// tertiary Lund declustering
+// virtual std::vector<LundDeclustering> tertiary(const PseudoJet& jet) const;
+
+// /// description of the class
+// virtual std::string description() const;
+
+// private:
+// /// tertiary definition
+// SecondaryLund * tertiary_def_;
+// };
+
+
+} // namespace contrib
+
+FASTJET_END_NAMESPACE
+
+#endif // __FASTJET_CONTRIB_LUNDWITHSECONDARY_HH__
+
Property changes on: contrib/contribs/LundPlane/tags/2.0.3/LundWithSecondary.hh
___________________________________________________________________
Added: svn:keywords
## -0,0 +1 ##
+Id
\ No newline at end of property
Index: contrib/contribs/LundPlane/tags/2.0.3/example.ref
===================================================================
--- contrib/contribs/LundPlane/tags/2.0.3/example.ref (revision 0)
+++ contrib/contribs/LundPlane/tags/2.0.3/example.ref (revision 1345)
@@ -0,0 +1,24 @@
+# read an event with 354 particles
+# writing declusterings of primary and secondary plane to file jets.json
+#--------------------------------------------------------------------------
+# FastJet release 3.3.0
+# M. Cacciari, G.P. Salam and G. Soyez
+# A software package for jet finding and analysis at colliders
+# http://fastjet.fr
+#
+# Please cite EPJC72(2012)1896 [arXiv:1111.6097] if you use this package
+# for scientific work and optionally PLB641(2006)57 [hep-ph/0512210].
+#
+# FastJet is provided without warranty under the terms of the GNU GPLv2.
+# It uses T. Chan's closest pair algorithm, S. Fortune's Voronoi code
+# and 3rd party plugin jet algorithms. See COPYING file for details.
+#--------------------------------------------------------------------------
+LundGenerator with Recluster with new_jet_def = Longitudinally invariant Cambridge/Aachen algorithm with R = 1000 and E scheme recombination and keeping the hardest inclusive jet
+
+Lund coordinates ( ln 1/Delta, ln kt ) of declusterings of jet 0 are:
+(0.381818, -1.41338); (0.640225, -1.41382); (0.815003, -0.521976); (1.11695, -2.1319); (1.33942, -3.472); (1.52885, -2.46979); (1.56466, -0.0358016); (2.02807, -0.558102); (2.34917, 1.00406); (2.51877, -1.94794); (2.95973, -1.06118); (3.36119, -3.71927); (3.83009, -1.04409); (3.91026, 1.04294); (4.25234, -0.800966); (4.77749, -0.461738); (5.43338, -0.520936); (5.54091, -1.07405); (5.81939, -0.573153)
+
+Lund coordinates ( ln 1/Delta, ln kt ) of declusterings of jet 1 are:
+(0.108166, 0.409011); (0.478032, -0.762435); (0.5522, 1.69309); (0.814643, -0.89172); (0.87725, 0.291102); (1.17301, 0.430816); (1.46257, -2.02855); (2.04689, -3.19764); (2.19256, -0.828099); (2.86474, -1.09304); (2.98768, -1.21793); (3.3634, -0.355632); (4.17428, -0.227052); (4.59144, 0.645512); (4.86343, -2.29314); (5.8172, -2.47791)
+
+File jets.json written.
Index: contrib/contribs/LundPlane/tags/2.0.3/LundGenerator.hh
===================================================================
--- contrib/contribs/LundPlane/tags/2.0.3/LundGenerator.hh (revision 0)
+++ contrib/contribs/LundPlane/tags/2.0.3/LundGenerator.hh (revision 1345)
@@ -0,0 +1,138 @@
+// $Id$
+//
+// Copyright (c) 2018-, Frederic A. Dreyer, Keith Hamilton, Alexander Karlberg,
+// Gavin P. Salam, Ludovic Scyboz, Gregory Soyez, Rob Verheyen
+//
+//----------------------------------------------------------------------
+// This file is part of FastJet contrib.
+//
+// It is free software; you can redistribute it and/or modify it under
+// the terms of the GNU General Public License as published by the
+// Free Software Foundation; either version 2 of the License, or (at
+// your option) any later version.
+//
+// It is distributed in the hope that it will be useful, but WITHOUT
+// ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+// or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
+// License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this code. If not, see <http://www.gnu.org/licenses/>.
+//----------------------------------------------------------------------
+
+#ifndef __FASTJET_CONTRIB_LUNDGENERATOR_HH__
+#define __FASTJET_CONTRIB_LUNDGENERATOR_HH__
+
+#include <fastjet/internal/base.hh>
+#include "fastjet/tools/Recluster.hh"
+#include "fastjet/JetDefinition.hh"
+#include "fastjet/PseudoJet.hh"
+#include <string>
+#include <vector>
+#include <utility>
+
+// TODO:
+// - add interface to write declusterings to json files
+// [gps, possibly as a separate header, in order to factorise the json.hh dependence]
+// - something for pileup subtraction?
+// - do we want to update json.hh to latest? And handle
+// the precision issue more elegantly than the current
+// hack of editing json.hh
+// - what do we do about the fact that json.hh is c++11?
+
+FASTJET_BEGIN_NAMESPACE
+
+namespace contrib{
+
+class LundGenerator;
+
+//----------------------------------------------------------------------
+/// \class LundDeclustering
+/// Contains the declustering variables associated with a single qnode
+/// on the Lund plane
+class LundDeclustering {
+public:
+
+ /// return the pair PseudoJet, i.e. sum of the two subjets
+ const PseudoJet & pair() const {return pair_;}
+ /// returns the subjet with larger transverse momentum
+ const PseudoJet & harder() const {return harder_;}
+ /// returns the subjet with smaller transverse momentum
+ const PseudoJet & softer() const {return softer_;}
+
+
+ /// returns pair().m() [cached]
+ double m() const {return m_;}
+
+ /// returns the rapidity-azimuth separation of the pair of subjets [cached]
+ double Delta() const {return Delta_;}
+
+ /// returns softer().pt() / (softer().pt() + harder().pt()) [cached]
+ double z() const {return z_;}
+
+ /// returns softer().pt() * Delta() [cached]
+ double kt() const {return kt_;}
+
+ /// returns z() * Delta() [cached]
+ double kappa() const {return kappa_;}
+
+ /// returns an azimuthal type angle of softer() around harder()
+ double psi() const {return psi_;}
+
+ /// returns the x,y coordinates that are used in the Lund-plane plots
+ /// of arXiv:1807.04758: ln(1/Delta()), and ln(kt()) respectively
+ std::pair<double,double> const lund_coordinates() const {
+ return std::pair<double,double>(std::log(1.0/Delta()),std::log(kt()));
+ }
+
+ virtual ~LundDeclustering() {}
+
+private:
+ double m_, Delta_, z_, kt_, kappa_, psi_;
+ PseudoJet pair_, harder_, softer_;
+
+protected:
+ /// the constructor is private, because users will not generally be
+ /// constructing a LundDeclustering element themselves.
+ LundDeclustering(const PseudoJet& pair,
+ const PseudoJet& j1, const PseudoJet& j2);
+
+ friend class LundGenerator;
+
+};
+
+
+//----------------------------------------------------------------------
+/// \class LundGenerator
+/// Generates vector of LundDeclustering for a given jet
+/// corresponding to its Lund plane.
+class LundGenerator : public FunctionOfPseudoJet< std::vector<LundDeclustering> > {
+public:
+ /// LundGenerator constructor
+ LundGenerator(JetAlgorithm jet_alg = cambridge_algorithm)
+ : recluster_(JetDefinition(jet_alg, JetDefinition::max_allowable_R)){}
+
+ /// LundGenerator constructor with jet definition
+ LundGenerator(const JetDefinition & jet_def) : recluster_(jet_def){}
+
+ /// destructor
+ virtual ~LundGenerator() {}
+
+ /// obtain the declusterings of the primary plane of the jet
+ virtual std::vector<LundDeclustering> result(const PseudoJet& jet) const;
+
+ /// description of the class
+ virtual std::string description() const;
+
+private:
+ /// recluster definition
+ Recluster recluster_;
+};
+
+
+} // namespace contrib
+
+FASTJET_END_NAMESPACE
+
+#endif // __FASTJET_CONTRIB_LUNDGENERATOR_HH__
+
Property changes on: contrib/contribs/LundPlane/tags/2.0.3/LundGenerator.hh
___________________________________________________________________
Added: svn:keywords
## -0,0 +1 ##
+Id
\ No newline at end of property
Index: contrib/contribs/LundPlane/tags/2.0.3/COPYING
===================================================================
--- contrib/contribs/LundPlane/tags/2.0.3/COPYING (revision 0)
+++ contrib/contribs/LundPlane/tags/2.0.3/COPYING (revision 1345)
@@ -0,0 +1,343 @@
+======================================================================
+======================================================================
+======================================================================
+ GNU GENERAL PUBLIC LICENSE
+ Version 2, June 1991
+
+ Copyright (C) 1989, 1991 Free Software Foundation, Inc.
+ 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+ Preamble
+
+ The licenses for most software are designed to take away your
+freedom to share and change it. By contrast, the GNU General Public
+License is intended to guarantee your freedom to share and change free
+software--to make sure the software is free for all its users. This
+General Public License applies to most of the Free Software
+Foundation's software and to any other program whose authors commit to
+using it. (Some other Free Software Foundation software is covered by
+the GNU Library General Public License instead.) You can apply it to
+your programs, too.
+
+ When we speak of free software, we are referring to freedom, not
+price. Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+this service if you wish), that you receive source code or can get it
+if you want it, that you can change the software or use pieces of it
+in new free programs; and that you know you can do these things.
+
+ To protect your rights, we need to make restrictions that forbid
+anyone to deny you these rights or to ask you to surrender the rights.
+These restrictions translate to certain responsibilities for you if you
+distribute copies of the software, or if you modify it.
+
+ For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must give the recipients all the rights that
+you have. You must make sure that they, too, receive or can get the
+source code. And you must show them these terms so they know their
+rights.
+
+ We protect your rights with two steps: (1) copyright the software, and
+(2) offer you this license which gives you legal permission to copy,
+distribute and/or modify the software.
+
+ Also, for each author's protection and ours, we want to make certain
+that everyone understands that there is no warranty for this free
+software. If the software is modified by someone else and passed on, we
+want its recipients to know that what they have is not the original, so
+that any problems introduced by others will not reflect on the original
+authors' reputations.
+
+ Finally, any free program is threatened constantly by software
+patents. We wish to avoid the danger that redistributors of a free
+program will individually obtain patent licenses, in effect making the
+program proprietary. To prevent this, we have made it clear that any
+patent must be licensed for everyone's free use or not licensed at all.
+
+ The precise terms and conditions for copying, distribution and
+modification follow.
+
+ GNU GENERAL PUBLIC LICENSE
+ TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+ 0. This License applies to any program or other work which contains
+a notice placed by the copyright holder saying it may be distributed
+under the terms of this General Public License. The "Program", below,
+refers to any such program or work, and a "work based on the Program"
+means either the Program or any derivative work under copyright law:
+that is to say, a work containing the Program or a portion of it,
+either verbatim or with modifications and/or translated into another
+language. (Hereinafter, translation is included without limitation in
+the term "modification".) Each licensee is addressed as "you".
+
+Activities other than copying, distribution and modification are not
+covered by this License; they are outside its scope. The act of
+running the Program is not restricted, and the output from the Program
+is covered only if its contents constitute a work based on the
+Program (independent of having been made by running the Program).
+Whether that is true depends on what the Program does.
+
+ 1. You may copy and distribute verbatim copies of the Program's
+source code as you receive it, in any medium, provided that you
+conspicuously and appropriately publish on each copy an appropriate
+copyright notice and disclaimer of warranty; keep intact all the
+notices that refer to this License and to the absence of any warranty;
+and give any other recipients of the Program a copy of this License
+along with the Program.
+
+You may charge a fee for the physical act of transferring a copy, and
+you may at your option offer warranty protection in exchange for a fee.
+
+ 2. You may modify your copy or copies of the Program or any portion
+of it, thus forming a work based on the Program, and copy and
+distribute such modifications or work under the terms of Section 1
+above, provided that you also meet all of these conditions:
+
+ a) You must cause the modified files to carry prominent notices
+ stating that you changed the files and the date of any change.
+
+ b) You must cause any work that you distribute or publish, that in
+ whole or in part contains or is derived from the Program or any
+ part thereof, to be licensed as a whole at no charge to all third
+ parties under the terms of this License.
+
+ c) If the modified program normally reads commands interactively
+ when run, you must cause it, when started running for such
+ interactive use in the most ordinary way, to print or display an
+ announcement including an appropriate copyright notice and a
+ notice that there is no warranty (or else, saying that you provide
+ a warranty) and that users may redistribute the program under
+ these conditions, and telling the user how to view a copy of this
+ License. (Exception: if the Program itself is interactive but
+ does not normally print such an announcement, your work based on
+ the Program is not required to print an announcement.)
+
+These requirements apply to the modified work as a whole. If
+identifiable sections of that work are not derived from the Program,
+and can be reasonably considered independent and separate works in
+themselves, then this License, and its terms, do not apply to those
+sections when you distribute them as separate works. But when you
+distribute the same sections as part of a whole which is a work based
+on the Program, the distribution of the whole must be on the terms of
+this License, whose permissions for other licensees extend to the
+entire whole, and thus to each and every part regardless of who wrote it.
+
+Thus, it is not the intent of this section to claim rights or contest
+your rights to work written entirely by you; rather, the intent is to
+exercise the right to control the distribution of derivative or
+collective works based on the Program.
+
+In addition, mere aggregation of another work not based on the Program
+with the Program (or with a work based on the Program) on a volume of
+a storage or distribution medium does not bring the other work under
+the scope of this License.
+
+ 3. You may copy and distribute the Program (or a work based on it,
+under Section 2) in object code or executable form under the terms of
+Sections 1 and 2 above provided that you also do one of the following:
+
+ a) Accompany it with the complete corresponding machine-readable
+ source code, which must be distributed under the terms of Sections
+ 1 and 2 above on a medium customarily used for software interchange; or,
+
+ b) Accompany it with a written offer, valid for at least three
+ years, to give any third party, for a charge no more than your
+ cost of physically performing source distribution, a complete
+ machine-readable copy of the corresponding source code, to be
+ distributed under the terms of Sections 1 and 2 above on a medium
+ customarily used for software interchange; or,
+
+ c) Accompany it with the information you received as to the offer
+ to distribute corresponding source code. (This alternative is
+ allowed only for noncommercial distribution and only if you
+ received the program in object code or executable form with such
+ an offer, in accord with Subsection b above.)
+
+The source code for a work means the preferred form of the work for
+making modifications to it. For an executable work, complete source
+code means all the source code for all modules it contains, plus any
+associated interface definition files, plus the scripts used to
+control compilation and installation of the executable. However, as a
+special exception, the source code distributed need not include
+anything that is normally distributed (in either source or binary
+form) with the major components (compiler, kernel, and so on) of the
+operating system on which the executable runs, unless that component
+itself accompanies the executable.
+
+If distribution of executable or object code is made by offering
+access to copy from a designated place, then offering equivalent
+access to copy the source code from the same place counts as
+distribution of the source code, even though third parties are not
+compelled to copy the source along with the object code.
+
+ 4. You may not copy, modify, sublicense, or distribute the Program
+except as expressly provided under this License. Any attempt
+otherwise to copy, modify, sublicense or distribute the Program is
+void, and will automatically terminate your rights under this License.
+However, parties who have received copies, or rights, from you under
+this License will not have their licenses terminated so long as such
+parties remain in full compliance.
+
+ 5. You are not required to accept this License, since you have not
+signed it. However, nothing else grants you permission to modify or
+distribute the Program or its derivative works. These actions are
+prohibited by law if you do not accept this License. Therefore, by
+modifying or distributing the Program (or any work based on the
+Program), you indicate your acceptance of this License to do so, and
+all its terms and conditions for copying, distributing or modifying
+the Program or works based on it.
+
+ 6. Each time you redistribute the Program (or any work based on the
+Program), the recipient automatically receives a license from the
+original licensor to copy, distribute or modify the Program subject to
+these terms and conditions. You may not impose any further
+restrictions on the recipients' exercise of the rights granted herein.
+You are not responsible for enforcing compliance by third parties to
+this License.
+
+ 7. If, as a consequence of a court judgment or allegation of patent
+infringement or for any other reason (not limited to patent issues),
+conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License. If you cannot
+distribute so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you
+may not distribute the Program at all. For example, if a patent
+license would not permit royalty-free redistribution of the Program by
+all those who receive copies directly or indirectly through you, then
+the only way you could satisfy both it and this License would be to
+refrain entirely from distribution of the Program.
+
+If any portion of this section is held invalid or unenforceable under
+any particular circumstance, the balance of the section is intended to
+apply and the section as a whole is intended to apply in other
+circumstances.
+
+It is not the purpose of this section to induce you to infringe any
+patents or other property right claims or to contest validity of any
+such claims; this section has the sole purpose of protecting the
+integrity of the free software distribution system, which is
+implemented by public license practices. Many people have made
+generous contributions to the wide range of software distributed
+through that system in reliance on consistent application of that
+system; it is up to the author/donor to decide if he or she is willing
+to distribute software through any other system and a licensee cannot
+impose that choice.
+
+This section is intended to make thoroughly clear what is believed to
+be a consequence of the rest of this License.
+
+ 8. If the distribution and/or use of the Program is restricted in
+certain countries either by patents or by copyrighted interfaces, the
+original copyright holder who places the Program under this License
+may add an explicit geographical distribution limitation excluding
+those countries, so that distribution is permitted only in or among
+countries not thus excluded. In such case, this License incorporates
+the limitation as if written in the body of this License.
+
+ 9. The Free Software Foundation may publish revised and/or new versions
+of the General Public License from time to time. Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+Each version is given a distinguishing version number. If the Program
+specifies a version number of this License which applies to it and "any
+later version", you have the option of following the terms and conditions
+either of that version or of any later version published by the Free
+Software Foundation. If the Program does not specify a version number of
+this License, you may choose any version ever published by the Free Software
+Foundation.
+
+ 10. If you wish to incorporate parts of the Program into other free
+programs whose distribution conditions are different, write to the author
+to ask for permission. For software which is copyrighted by the Free
+Software Foundation, write to the Free Software Foundation; we sometimes
+make exceptions for this. Our decision will be guided by the two goals
+of preserving the free status of all derivatives of our free software and
+of promoting the sharing and reuse of software generally.
+
+ NO WARRANTY
+
+ 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
+FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
+OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
+PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS
+TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE
+PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
+REPAIR OR CORRECTION.
+
+ 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
+REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
+INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
+OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
+TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
+YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
+PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGES.
+
+ END OF TERMS AND CONDITIONS
+
+ How to Apply These Terms to Your New Programs
+
+ If you develop a new program, and you want it to be of the greatest
+possible use to the public, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these terms.
+
+ To do so, attach the following notices to the program. It is safest
+to attach them to the start of each source file to most effectively
+convey the exclusion of warranty; and each file should have at least
+the "copyright" line and a pointer to where the full notice is found.
+
+ <one line to give the program's name and a brief idea of what it does.>
+ Copyright (C) <year> <name of author>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+
+
+Also add information on how to contact you by electronic and paper mail.
+
+If the program is interactive, make it output a short notice like this
+when it starts in an interactive mode:
+
+ Gnomovision version 69, Copyright (C) year name of author
+ Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+ This is free software, and you are welcome to redistribute it
+ under certain conditions; type `show c' for details.
+
+The hypothetical commands `show w' and `show c' should show the appropriate
+parts of the General Public License. Of course, the commands you use may
+be called something other than `show w' and `show c'; they could even be
+mouse-clicks or menu items--whatever suits your program.
+
+You should also get your employer (if you work as a programmer) or your
+school, if any, to sign a "copyright disclaimer" for the program, if
+necessary. Here is a sample; alter the names:
+
+ Yoyodyne, Inc., hereby disclaims all copyright interest in the program
+ `Gnomovision' (which makes passes at compilers) written by James Hacker.
+
+ <signature of Ty Coon>, 1 April 1989
+ Ty Coon, President of Vice
+
+This General Public License does not permit incorporating your program into
+proprietary programs. If your program is a subroutine library, you may
+consider it more useful to permit linking proprietary applications with the
+library. If this is what you want to do, use the GNU Library General
+Public License instead of this License.
Index: contrib/contribs/LundPlane/tags/2.0.3/SecondaryLund.hh
===================================================================
--- contrib/contribs/LundPlane/tags/2.0.3/SecondaryLund.hh (revision 0)
+++ contrib/contribs/LundPlane/tags/2.0.3/SecondaryLund.hh (revision 1345)
@@ -0,0 +1,122 @@
+// $Id$
+//
+// Copyright (c) 2018-, Frederic A. Dreyer, Keith Hamilton, Alexander Karlberg,
+// Gavin P. Salam, Ludovic Scyboz, Gregory Soyez, Rob Verheyen
+//
+//----------------------------------------------------------------------
+// This file is part of FastJet contrib.
+//
+// It is free software; you can redistribute it and/or modify it under
+// the terms of the GNU General Public License as published by the
+// Free Software Foundation; either version 2 of the License, or (at
+// your option) any later version.
+//
+// It is distributed in the hope that it will be useful, but WITHOUT
+// ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+// or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
+// License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this code. If not, see <http://www.gnu.org/licenses/>.
+//----------------------------------------------------------------------
+
+#ifndef __FASTJET_CONTRIB_SECONDARYLUND_HH__
+#define __FASTJET_CONTRIB_SECONDARYLUND_HH__
+
+#include "LundGenerator.hh"
+
+FASTJET_BEGIN_NAMESPACE
+
+namespace contrib{
+
+//----------------------------------------------------------------------
+/// \class SecondaryLund
+/// Base class for definitions of the leading emission
+class SecondaryLund {
+public:
+ /// SecondaryLund constructor
+ SecondaryLund() {}
+
+ /// destructor
+ virtual ~SecondaryLund() {}
+
+ /// returns the index of branch corresponding to the root of the secondary plane
+ virtual int result(const std::vector<LundDeclustering> & declusts) const = 0;
+
+ int operator()(const std::vector<LundDeclustering> & declusts) const {
+ return result(declusts);
+ }
+
+ /// description of the class
+ virtual std::string description() const;
+};
+
+//----------------------------------------------------------------------
+/// \class SecondaryLund_mMDT
+/// Contains a definition for the leading emission using mMDTZ
+class SecondaryLund_mMDT : public SecondaryLund {
+public:
+ /// SecondaryLund_mMDT constructor
+ SecondaryLund_mMDT(double zcut = 0.025) : zcut_(zcut) {}
+
+ /// destructor
+ virtual ~SecondaryLund_mMDT() {}
+
+ /// returns the index of branch corresponding to the root of the secondary plane
+ virtual int result(const std::vector<LundDeclustering> & declusts) const;
+
+ /// description of the class
+ virtual std::string description() const;
+private:
+ /// zcut parameter
+ double zcut_;
+};
+
+//----------------------------------------------------------------------
+/// \class SecondaryLund_dotmMDT
+/// Contains a definition for the leading emission using dotmMDT
+class SecondaryLund_dotmMDT : public SecondaryLund {
+public:
+ /// SecondaryLund_dotmMDT constructor
+ SecondaryLund_dotmMDT(double zcut = 0.025) : zcut_(zcut) {}
+
+ /// destructor
+ virtual ~SecondaryLund_dotmMDT() {}
+
+ /// returns the index of branch corresponding to the root of the secondary plane
+ virtual int result(const std::vector<LundDeclustering> & declusts) const;
+
+ /// description of the class
+ virtual std::string description() const;
+
+private:
+ /// zcut parameter
+ double zcut_;
+};
+
+//----------------------------------------------------------------------
+/// \class SecondaryLund_Mass
+/// Contains a definition for the leading emission using mass
+class SecondaryLund_Mass : public SecondaryLund {
+public:
+ /// SecondaryLund_Mass constructor (default mass reference is W mass)
+ SecondaryLund_Mass(double ref_mass = 80.4) : mref2_(ref_mass*ref_mass) {}
+
+ /// destructor
+ virtual ~SecondaryLund_Mass() {}
+
+ /// returns the index of branch corresponding to the root of the secondary plane
+ virtual int result(const std::vector<LundDeclustering> & declusts) const;
+
+ /// description of the class
+ virtual std::string description() const;
+private:
+ double mref2_;
+};
+
+} // namespace contrib
+
+FASTJET_END_NAMESPACE
+
+#endif // __FASTJET_CONTRIB_SECONDARYLUND_HH__
+
Property changes on: contrib/contribs/LundPlane/tags/2.0.3/SecondaryLund.hh
___________________________________________________________________
Added: svn:keywords
## -0,0 +1 ##
+Id
\ No newline at end of property
Index: contrib/contribs/LundPlane/tags/2.0.3/RecursiveLundEEGenerator.hh
===================================================================
--- contrib/contribs/LundPlane/tags/2.0.3/RecursiveLundEEGenerator.hh (revision 0)
+++ contrib/contribs/LundPlane/tags/2.0.3/RecursiveLundEEGenerator.hh (revision 1345)
@@ -0,0 +1,301 @@
+// $Id$
+//
+// Copyright (c) 2018-, Frederic A. Dreyer, Keith Hamilton, Alexander Karlberg,
+// Gavin P. Salam, Ludovic Scyboz, Gregory Soyez, Rob Verheyen
+//
+//----------------------------------------------------------------------
+// This file is part of FastJet contrib.
+//
+// It is free software; you can redistribute it and/or modify it under
+// the terms of the GNU General Public License as published by the
+// Free Software Foundation; either version 2 of the License, or (at
+// your option) any later version.
+//
+// It is distributed in the hope that it will be useful, but WITHOUT
+// ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+// or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
+// License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this code. If not, see <http://www.gnu.org/licenses/>.
+//----------------------------------------------------------------------
+
+#ifndef __FASTJET_CONTRIB_RECURSIVELUNDEEGENERATOR_HH__
+#define __FASTJET_CONTRIB_RECURSIVELUNDEEGENERATOR_HH__
+
+#include "LundEEHelpers.hh"
+
+#include <fastjet/internal/base.hh>
+#include "fastjet/tools/Recluster.hh"
+#include "fastjet/JetDefinition.hh"
+#include "fastjet/PseudoJet.hh"
+#include <string>
+#include <vector>
+#include <utility>
+#include <queue>
+
+using namespace std;
+
+FASTJET_BEGIN_NAMESPACE
+
+namespace contrib{
+
+//----------------------------------------------------------------------
+/// \class LundEEDeclustering
+/// Contains the declustering variables associated with a single node
+/// on the LundEE plane
+class LundEEDeclustering {
+public:
+
+ /// return the pair PseudoJet, i.e. sum of the two subjets
+ const PseudoJet & pair() const {return pair_;}
+ /// returns the subjet with larger transverse momentum
+ const PseudoJet & harder() const {return harder_;}
+ /// returns the subjet with smaller transverse momentum
+ const PseudoJet & softer() const {return softer_;}
+
+
+ /// returns pair().m() [cached]
+ double m() const {return m_;}
+
+ /// returns the effective pseudorapidity of the emission [cached]
+ double eta() const {return eta_;}
+
+ /// returns sin(theta) of the branching [cached]
+ double sin_theta() const {return sin_theta_;}
+
+ /// returns softer().modp() / (softer().modp() + harder().modp()) [cached]
+ double z() const {return z_;}
+
+ /// returns softer().modp() * sin(theta()) [cached]
+ double kt() const {return kt_;}
+
+ /// returns ln(softer().modp() * sin(theta())) [cached]
+ double lnkt() const {return lnkt_;}
+
+ /// returns z() * Delta() [cached]
+ double kappa() const {return kappa_;}
+
+ /// returns the index of the plane to which this branching belongs
+ int iplane() const {return iplane_;}
+
+ /// returns the depth of the plane on which this declustering
+ /// occurred. 0 is the primary plane, 1 is the first set of leaves, etc.
+ int depth() const {return depth_;}
+
+ /// returns iplane (plane index) of the leaf associated with the
+ /// potential further declustering of the softer of the objects in
+ /// this splitting
+ int leaf_iplane() const {return leaf_iplane_;}
+
+ /// Returns sign_s, indicating the initial parent jet index of this splitting
+ int sign_s() const {return sign_s_;}
+
+ /// (DEPRECATED)
+ /// returns an azimuthal type angle between this declustering plane and the previous one
+ /// Note: one should use psibar() instead, since we found that this definition of psi is
+ /// not invariant under rotations of the event
+ double psi() const {return psi_;}
+
+ /// update the azimuthal angle (deprecated)
+ void set_psi(double psi) {psi_ = psi;}
+
+ /// returns the azimuthal angle psibar between this declustering plane and the previous one
+ double psibar() const {return psibar_;}
+
+
+ /// returns the coordinates in the Lund plane
+ std::pair<double,double> const lund_coordinates() const {
+ return std::pair<double,double>(eta_,lnkt_);
+ }
+
+ virtual ~LundEEDeclustering() {}
+
+private:
+ int iplane_;
+ double psi_, psibar_, lnkt_, eta_;
+ double m_, z_, kt_, kappa_, sin_theta_;
+ PseudoJet pair_, harder_, softer_;
+ int depth_ = -1, leaf_iplane_ = -1;
+ int sign_s_;
+
+protected:
+
+ /// default ctor (protected, should not normally be needed by users,
+ /// but can be useful for derived classes)
+ LundEEDeclustering() {}
+
+ /// the constructor is protected, because users will not generally be
+ /// constructing a LundEEDeclustering element themselves.
+ LundEEDeclustering(const PseudoJet& pair,
+ const PseudoJet& j1, const PseudoJet& j2,
+ int iplane = -1, double psi = 0.0, double psibar = 0.0, int depth = -1, int leaf_iplane = -1, int sign_s = 1);
+
+ friend class RecursiveLundEEGenerator;
+
+};
+
+
+/// Default comparison operator for LundEEDeclustering, using kt as the ordering.
+/// Useful when including declusterings in structures like priority queues
+inline bool operator<(const LundEEDeclustering& d1, const LundEEDeclustering& d2) {
+ return d1.kt() < d2.kt();
+}
+
+//----------------------------------------------------------------------
+/// Class to carry out Lund declustering to get anything from the
+/// primary Lund plane declusterings to the full Lund diagram with all
+/// its leaves, etc.
+class RecursiveLundEEGenerator {
+ public:
+ /// constructs a RecursiveLundEEGenerator with the specified depth.
+ /// - depth = 0 means only primary declusterings are registered
+ /// - depth = 1 means the first set of leaves are declustered
+ /// - ...
+ /// - depth < 0 means no limit, i.e. recurse through all leaves
+ RecursiveLundEEGenerator(int max_depth = 0, bool dynamical_psi_ref = false) :
+ max_depth_(max_depth), nx_(1,0,0,0), ny_(0,1,0,0), dynamical_psi_ref_(dynamical_psi_ref)
+ {}
+
+ /// destructor
+ virtual ~RecursiveLundEEGenerator() {}
+
+ /// This takes a cluster sequence with an e+e- C/A style algorithm, e.g.
+ /// EECambridgePlugin(ycut=1.0).
+ ///
+ /// The output is a vector of LundEEDeclustering objects, ordered
+ /// according to kt
+ virtual std::vector<LundEEDeclustering> result(const ClusterSequence & cs) const {
+ std::vector<PseudoJet> exclusive_jets = cs.exclusive_jets(2);
+ assert(exclusive_jets.size() == 2);
+
+ // order the two jets according to momentum along z axis
+ if (exclusive_jets[0].pz() < exclusive_jets[1].pz()) {
+ std::swap(exclusive_jets[0],exclusive_jets[1]);
+ }
+
+ PseudoJet d_ev = exclusive_jets[0] - exclusive_jets[1];
+ lund_plane::Matrix3 rotmat = lund_plane::Matrix3::from_direction(d_ev);
+
+ std::vector<LundEEDeclustering> declusterings;
+ int depth = 0;
+ int max_iplane_sofar = 1;
+ for (unsigned ijet = 0; ijet < exclusive_jets.size(); ijet++) {
+
+ // reference direction for psibar calculation
+ PseudoJet axis = d_ev/sqrt(d_ev.modp2());
+ PseudoJet ref_plane = axis;
+
+ int sign_s = ijet == 0? +1 : -1;
+ // We can pass a vector normal to a plane of reference for phi definitions
+ append_to_vector(declusterings, exclusive_jets[ijet], depth, ijet, max_iplane_sofar,
+ rotmat, sign_s, exclusive_jets[0], exclusive_jets[1], ref_plane, 0., true);
+ }
+
+ // a typedef to save typing below
+ typedef LundEEDeclustering LD;
+ // sort so that declusterings are returned in order of decreasing
+ // kt (if result of the lambda is true, then first object appears
+ // before the second one in the final sorted list)
+ sort(declusterings.begin(), declusterings.end(),
+ [](const LD & d1, LD & d2){return d1.kt() > d2.kt();});
+
+ return declusterings;
+ }
+
+ private:
+
+ /// internal routine to recursively carry out the declusterings,
+ /// adding each one to the declusterings vector; the primary
+ /// ones are dealt with first (from large to small angle),
+ /// and then secondary ones take place.
+ void append_to_vector(std::vector<LundEEDeclustering> & declusterings,
+ const PseudoJet & jet, int depth,
+ int iplane, int & max_iplane_sofar,
+ const lund_plane::Matrix3 & rotmat, int sign_s,
+ const PseudoJet & harder,
+ const PseudoJet & softer,
+ const PseudoJet & psibar_ref_plane,
+ const double & last_psibar, bool first_time) const {
+ PseudoJet j1, j2;
+ if (!jet.has_parents(j1, j2)) return;
+ if (j1.modp2() < j2.modp2()) std::swap(j1,j2);
+
+ // calculation of azimuth psi
+ lund_plane::Matrix3 new_rotmat;
+ if (dynamical_psi_ref_) {
+ new_rotmat = lund_plane::Matrix3::from_direction(rotmat.transpose()*(sign_s*jet)) * rotmat;
+ } else {
+ new_rotmat = rotmat;
+ }
+ PseudoJet rx = new_rotmat * nx_;
+ PseudoJet ry = new_rotmat * ny_;
+ PseudoJet u1 = j1/j1.modp(), u2 = j2/j2.modp();
+ PseudoJet du = u2 - u1;
+ double x = du.px() * rx.px() + du.py() * rx.py() + du.pz() * rx.pz();
+ double y = du.px() * ry.px() + du.py() * ry.py() + du.pz() * ry.pz();
+ double psi = atan2(y,x);
+
+ // calculation of psibar
+ double psibar = 0.;
+ PseudoJet n1, n2;
+
+ // First psibar for this jet
+ if (first_time) {
+
+ // Compute the angle between the planes spanned by (some axis,j1) and by (j1,j2)
+ n1 = lund_plane::cross_product(psibar_ref_plane,j1);
+ n2 = lund_plane::cross_product(j1,j2);
+
+ double signed_angle = 0.;
+ n2 /= n2.modp();
+ if (n1.modp() != 0) {
+ n1 /= n1.modp();
+ signed_angle = lund_plane::signed_angle_between_planes(n1,n2,j1);
+ }
+
+ psibar = lund_plane::map_to_pi(j1.phi() + signed_angle);
+ }
+ // Else take the value of psibar_i and the plane from the last splitting to define psibar_{i+1}
+ else {
+ n2 = lund_plane::cross_product(j1,j2);
+ n2 /= n2.modp();
+ psibar = lund_plane::map_to_pi(last_psibar + lund_plane::signed_angle_between_planes(psibar_ref_plane, n2, j1));
+ }
+
+ int leaf_iplane = -1;
+ // we will recurse into the softer "parent" only if the depth is
+ // not yet at its limit or if there is no limit on the depth (max_depth<0)
+ bool recurse_into_softer = (depth < max_depth_ || max_depth_ < 0);
+ if (recurse_into_softer) {
+ max_iplane_sofar += 1;
+ leaf_iplane = max_iplane_sofar;
+ }
+
+ LundEEDeclustering declust(jet, j1, j2, iplane, psi, psibar, depth, leaf_iplane, sign_s);
+ declusterings.push_back(declust);
+
+ // now recurse
+ // for the definition of psibar, we recursively pass the last splitting plane (normal to n2) and the last value
+ // of psibar
+ append_to_vector(declusterings, j1, depth, iplane, max_iplane_sofar, new_rotmat, sign_s, u1, u2, n2, psibar, false);
+ if (recurse_into_softer) {
+ append_to_vector(declusterings, j2, depth+1, leaf_iplane, max_iplane_sofar, new_rotmat, sign_s, u1, u2, n2, psibar, false);
+ }
+ }
+
+ int max_depth_ = 0;
+ /// vectors used to help define psi
+ PseudoJet nx_;
+ PseudoJet ny_;
+ bool dynamical_psi_ref_;
+};
+
+} // namespace contrib
+
+FASTJET_END_NAMESPACE
+
+/// for output of declustering information
+std::ostream & operator<<(std::ostream & ostr, const fastjet::contrib::LundEEDeclustering & d);
+
+#endif // __FASTJET_CONTRIB_RECURSIVELUNDEEGENERATOR_HH__
Property changes on: contrib/contribs/LundPlane/tags/2.0.3/RecursiveLundEEGenerator.hh
___________________________________________________________________
Added: svn:keywords
## -0,0 +1 ##
+Id
\ No newline at end of property
Index: contrib/contribs/LundPlane/tags/2.0.3/NEWS
===================================================================
--- contrib/contribs/LundPlane/tags/2.0.3/NEWS (revision 0)
+++ contrib/contribs/LundPlane/tags/2.0.3/NEWS (revision 1345)
@@ -0,0 +1,19 @@
+2022/10/04: release of version 2.0.3
+- renamed EEHelpers.hh -> LundEEHelpers.hh, put its contents in
+ a dedicated lund_plane namespace and ensure it gets installed
+2022/08/20: release of version 2.0.2
+- fixed missing header for g++-12
+- fixed missing Makefile dependencies
+2021/12/06: release of version 2.0.1
+- fixed some compilation warnings (signed/unsigned)
+- fixed up missing info in AUTHORS
+- fixed commented python example lines
+2021/11/08: release of version 2.0.0
+- Recursive e+e- generator with spin-correlation observables
+ with the RecursiveLundEEGenerator
+- See example_dpsi_collinear.cc (implements analysis of arXiv:2103.16526)
+- and example_dpsi_slice.cc (implements analysis of arXiv:2111.01161)
+2020/02/23: release of version 1.0.3
+- fixes issue with C++98 compatibility
+2018/10/29: release of version 1.0.2
+2018/08/30: release of version 1.0.1
Index: contrib/contribs/LundPlane/tags/2.0.3/Makefile
===================================================================
--- contrib/contribs/LundPlane/tags/2.0.3/Makefile (revision 0)
+++ contrib/contribs/LundPlane/tags/2.0.3/Makefile (revision 1345)
@@ -0,0 +1,91 @@
+# If you are using this Makefile standalone and fastjet-config is not
+# in your path, edit this line to specify the full path
+FASTJETCONFIG=fastjet-config
+PREFIX=`$(FASTJETCONFIG) --prefix`
+CXX=g++
+CXXFLAGS= -O3 -Wall -g
+install_script = $(SHELL) ../utils/install-sh
+check_script = ../utils/check.sh
+
+# global contrib-wide Makefile include may override some of the above
+# variables (leading "-" means don't give an error if you can't find
+# the file)
+-include ../.Makefile.inc
+
+#------------------------------------------------------------------------
+# things that are specific to this contrib
+NAME=LundPlane
+SRCS=LundGenerator.cc LundWithSecondary.cc SecondaryLund.cc RecursiveLundEEGenerator.cc
+EXAMPLES=example example_secondary example_dpsi_collinear example_dpsi_slice
+INSTALLED_HEADERS=LundGenerator.hh LundWithSecondary.hh SecondaryLund.hh RecursiveLundEEGenerator.hh LundJSON.hh LundEEHelpers.hh
+#------------------------------------------------------------------------
+
+CXXFLAGS+= $(shell $(FASTJETCONFIG) --cxxflags)
+LDFLAGS += -lm $(shell $(FASTJETCONFIG) --libs) -lfastjetplugins
+
+OBJS = $(SRCS:.cc=.o)
+EXAMPLES_SRCS = $(EXAMPLES:=.cc)
+
+install_HEADER = $(install_script) -c -m 644
+install_LIB = $(install_script) -c -m 644
+install_DIR = $(install_script) -d
+install_DATA = $(install_script) -c -m 644
+install_PROGRAM = $(install_script) -c -s
+install_SCRIPT = $(install_script) -c
+
+.PHONY: clean distclean examples check install
+
+# compilation of the code (default target)
+all: lib$(NAME).a
+
+lib$(NAME).a: $(OBJS)
+ ar cru lib$(NAME).a $(OBJS)
+ ranlib lib$(NAME).a
+
+# building the examples
+examples: $(EXAMPLES)
+
+# the following construct makes it possible to automatically build
+# each of the examples listed in $EXAMPLES
+$(EXAMPLES): % : %.o all
+ $(CXX) $(CXXFLAGS) -o $@ $< -L. -l$(NAME) $(LDFLAGS)
+
+# check that everything went fine
+check: examples
+ @for prog in $(EXAMPLES); do\
+ if [ "$${prog}" = "example_dpsi_collinear" ] || [ "$${prog}" = "example_dpsi_slice" ]; then \
+ $(check_script) $${prog} ../data/single-ee-event.dat || exit 1; \
+ else \
+ $(check_script) $${prog} ../data/single-event.dat || exit 1; \
+ fi; \
+ done
+ @echo "All tests successful"
+
+# cleaning the directory
+clean:
+ rm -f *~ *.o
+
+distclean: clean
+ rm -f lib$(NAME).a $(EXAMPLES)
+
+# install things in PREFIX/...
+install: all
+ $(install_DIR) $(PREFIX)/include/fastjet/contrib
+ for header in $(INSTALLED_HEADERS); do\
+ $(install_HEADER) $$header $(PREFIX)/include/fastjet/contrib/;\
+ done
+ $(install_DIR) $(PREFIX)/lib
+ $(install_LIB) lib$(NAME).a $(PREFIX)/lib
+
+depend:
+ makedepend -Y -- -- $(SRCS) $(EXAMPLES_SRCS)
+# DO NOT DELETE
+
+LundGenerator.o: LundGenerator.hh
+LundWithSecondary.o: LundWithSecondary.hh LundGenerator.hh SecondaryLund.hh
+SecondaryLund.o: SecondaryLund.hh LundGenerator.hh
+RecursiveLundEEGenerator.o: RecursiveLundEEGenerator.hh LundEEHelpers.hh
+example.o: LundGenerator.hh LundJSON.hh
+example_secondary.o: LundWithSecondary.hh LundGenerator.hh SecondaryLund.hh
+example_dpsi_collinear.o: RecursiveLundEEGenerator.hh LundEEHelpers.hh
+example_dpsi_slice.o: RecursiveLundEEGenerator.hh LundEEHelpers.hh
Index: contrib/contribs/LundPlane/tags/2.0.3/example_dpsi_collinear.ref
===================================================================
--- contrib/contribs/LundPlane/tags/2.0.3/example_dpsi_collinear.ref (revision 0)
+++ contrib/contribs/LundPlane/tags/2.0.3/example_dpsi_collinear.ref (revision 1345)
@@ -0,0 +1,19 @@
+# read an event with 70 particles
+#--------------------------------------------------------------------------
+# FastJet release 3.3.2
+# M. Cacciari, G.P. Salam and G. Soyez
+# A software package for jet finding and analysis at colliders
+# http://fastjet.fr
+#
+# Please cite EPJC72(2012)1896 [arXiv:1111.6097] if you use this package
+# for scientific work and optionally PLB641(2006)57 [hep-ph/0512210].
+#
+# FastJet is provided without warranty under the terms of the GNU GPLv2.
+# It uses T. Chan's closest pair algorithm, S. Fortune's Voronoi code
+# and 3rd party plugin jet algorithms. See COPYING file for details.
+#--------------------------------------------------------------------------
+Primary that passes the zcut of 0.1, with Lund coordinates ( ln 1/Delta, ln kt, psibar ):
+index [0](0.461518, 2.74826, 2.32912)
+
+with Lund coordinates for the secondary plane that passes the zcut of 0.1
+index [0](0.860316, 1.51421, -2.65024) --> delta_psi = 1.30383
Index: contrib/contribs/LundPlane/tags/2.0.3/example_dpsi_slice.cc
===================================================================
--- contrib/contribs/LundPlane/tags/2.0.3/example_dpsi_slice.cc (revision 0)
+++ contrib/contribs/LundPlane/tags/2.0.3/example_dpsi_slice.cc (revision 1345)
@@ -0,0 +1,173 @@
+//----------------------------------------------------------------------
+/// \file example_dpsi_slice.cc
+///
+/// This example program is meant to illustrate how the
+/// fastjet::contrib::RecursiveLundEEGenerator class is used.
+///
+/// Run this example with
+///
+/// \verbatim
+/// ./example_dpsi_slice < ../data/single-ee-event.dat
+/// \endverbatim
+
+//----------------------------------------------------------------------
+// $Id$
+//
+// Copyright (c) 2018-, Frederic A. Dreyer, Keith Hamilton, Alexander Karlberg,
+// Gavin P. Salam, Ludovic Scyboz, Gregory Soyez, Rob Verheyen
+//
+//----------------------------------------------------------------------
+// This file is part of FastJet contrib.
+//
+// It is free software; you can redistribute it and/or modify it under
+// the terms of the GNU General Public License as published by the
+// Free Software Foundation; either version 2 of the License, or (at
+// your option) any later version.
+//
+// It is distributed in the hope that it will be useful, but WITHOUT
+// ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+// or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
+// License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this code. If not, see <http://www.gnu.org/licenses/>.
+//----------------------------------------------------------------------
+
+#include <iostream>
+#include <fstream>
+#include <sstream>
+
+#include "fastjet/PseudoJet.hh"
+#include "fastjet/EECambridgePlugin.hh"
+#include <string>
+#include "RecursiveLundEEGenerator.hh" // In external code, this should be fastjet/contrib/RecursiveLundEEGenerator.hh
+using namespace std;
+using namespace fastjet;
+
+// Definitions for the slice observable (ymax = 1, zcut = 0.1)
+double abs_rap_slice = 1;
+double z2_cut = 0.1;
+
+// forward declaration to make things clearer
+void read_event(vector<PseudoJet> &event);
+
+// returns true if PseudoJet p is in the central slice of half-width abs_rap_slice
+// w.r.t. the event axis pref
+bool in_slice(const PseudoJet & p, const PseudoJet & pref) {
+
+ // Rotate p, and use the rapidity to determine if p is in the slice
+ contrib::lund_plane::Matrix3 rotmat = contrib::lund_plane::Matrix3::from_direction(pref).transpose();
+ const PseudoJet p_rot = rotmat*p;
+
+ return fabs(p_rot.rap()) < abs_rap_slice;
+}
+
+//----------------------------------------------------------------------
+int main(){
+
+ //----------------------------------------------------------
+ // read in input particles
+ vector<PseudoJet> event;
+ read_event(event);
+
+ cout << "# read an event with " << event.size() << " particles" << endl;
+ //----------------------------------------------------------
+ // create an instance of RecursiveLundEEGenerator, with default options
+ int depth = -1;
+ bool dynamic_psi_reference = true;
+ fastjet::contrib::RecursiveLundEEGenerator lund(depth, dynamic_psi_reference);
+
+ // first get some C/A jets
+ double y3_cut = 1.0;
+ JetDefinition::Plugin* ee_plugin = new EECambridgePlugin(y3_cut);
+ JetDefinition jet_def(ee_plugin);
+ ClusterSequence cs(event, jet_def);
+
+ // Get the event axis (to be used for the slice)
+ std::vector<PseudoJet> excl = cs.exclusive_jets(2);
+ assert(excl.size() == 2);
+ // order the two jets according to momentum along z axis
+ if (excl[0].pz() < excl[1].pz()) {
+ std::swap(excl[0],excl[1]);
+ }
+ const PseudoJet ev_axis = excl[0]-excl[1];
+
+ // Get the list of primary declusterings
+ const vector<contrib::LundEEDeclustering> declusts = lund.result(cs);
+
+ // find the declustering that throws something into a fixed slice
+ // (from a parent that was not in the slice) and that throws the
+ // largest pt (relative to the z axis) into that slice
+
+ int index_of_max_pt_in_slice = -1;
+ double max_pt_in_slice = 0.0;
+ double psi_1;
+ for (unsigned i = 0; i < declusts.size(); i++) {
+ const auto & decl = declusts[i];
+ if (!in_slice(decl.harder(), ev_axis) && in_slice(decl.softer(), ev_axis)) {
+ if (decl.softer().pt() > max_pt_in_slice) {
+ index_of_max_pt_in_slice = i;
+ max_pt_in_slice = decl.softer().pt();
+ psi_1 = decl.psibar();
+ }
+ }
+ }
+ if (index_of_max_pt_in_slice < 0) return 0;
+
+ // establish what we need to follow and the reference psi_1
+ int iplane_to_follow = declusts[index_of_max_pt_in_slice].leaf_iplane();
+
+ vector<const contrib::LundEEDeclustering *> secondaries;
+ for (const auto & declust: declusts){
+ if (declust.iplane() == iplane_to_follow) secondaries.push_back(&declust);
+ }
+
+ int index_of_max_kt_secondary = -1;
+ double dpsi;
+ for (uint i_secondary=0; i_secondary<secondaries.size(); i_secondary++) {
+ if (secondaries[i_secondary]->z() > z2_cut) {
+
+ index_of_max_kt_secondary = i_secondary;
+ double psi_2 = secondaries[i_secondary]->psibar();
+ dpsi = contrib::lund_plane::map_to_pi(psi_2 - psi_1);
+
+ break;
+ }
+ }
+ if (index_of_max_kt_secondary < 0) return 0;
+
+ cout << "Primary in the central slice, with Lund coordinates ( ln 1/Delta, ln kt, psibar ):" << endl;
+ pair<double,double> coords = declusts[index_of_max_pt_in_slice].lund_coordinates();
+ cout << "index [" << index_of_max_pt_in_slice << "](" << coords.first << ", " << coords.second << ", "
+ << declusts[index_of_max_pt_in_slice].psibar() << ")" << endl;
+ cout << endl << "with Lund coordinates for the (highest-kT) secondary plane that passes the zcut of "
+ << z2_cut << endl;
+ coords = secondaries[index_of_max_kt_secondary]->lund_coordinates();
+ cout << "index [" << index_of_max_kt_secondary << "](" << coords.first << ", " << coords.second << ", "
+ << secondaries[index_of_max_kt_secondary]->psibar() << ")";
+
+ cout << " --> delta_psi,slice = " << dpsi << endl;
+
+ // Delete the EECambridge plugin
+ delete ee_plugin;
+
+ return 0;
+}
+
+// read in input particles
+void read_event(vector<PseudoJet> &event){
+ string line;
+ while (getline(cin, line)) {
+ istringstream linestream(line);
+ // take substrings to avoid problems when there is extra "pollution"
+ // characters (e.g. line-feed).
+ if (line.substr(0,4) == "#END") {return;}
+ if (line.substr(0,1) == "#") {continue;}
+ double px,py,pz,E;
+ linestream >> px >> py >> pz >> E;
+ PseudoJet particle(px,py,pz,E);
+
+ // push event onto back of full_event vector
+ event.push_back(particle);
+ }
+}
Property changes on: contrib/contribs/LundPlane/tags/2.0.3/example_dpsi_slice.cc
___________________________________________________________________
Added: svn:keywords
## -0,0 +1 ##
+Id
\ No newline at end of property
Index: contrib/contribs/LundPlane/tags/2.0.3/example_secondary.ref
===================================================================
--- contrib/contribs/LundPlane/tags/2.0.3/example_secondary.ref (revision 0)
+++ contrib/contribs/LundPlane/tags/2.0.3/example_secondary.ref (revision 1345)
@@ -0,0 +1,27 @@
+# read an event with 354 particles
+#--------------------------------------------------------------------------
+# FastJet release 3.3.0-devel
+# M. Cacciari, G.P. Salam and G. Soyez
+# A software package for jet finding and analysis at colliders
+# http://fastjet.fr
+#
+# Please cite EPJC72(2012)1896 [arXiv:1111.6097] if you use this package
+# for scientific work and optionally PLB641(2006)57 [hep-ph/0512210].
+#
+# FastJet is provided without warranty under the terms of the GNU GPLv2.
+# It uses T. Chan's closest pair algorithm, S. Fortune's Voronoi code,
+# CGAL and 3rd party plugin jet algorithms. See COPYING file for details.
+#--------------------------------------------------------------------------
+LundWithSecondary using SecondaryLund (mMDT selection of leading emission, zcut=0.025) and LundGenerator with Recluster with new_jet_def = Longitudinally invariant Cambridge/Aachen algorithm with R = 1000 and E scheme recombination and keeping the hardest inclusive jet
+
+Lund coordinates ( ln 1/Delta, ln kt ) of declusterings of jet 0 are:
+[0](0.381818, -1.41338); [1](0.640225, -1.41382); [2](0.815003, -0.521976); [3](1.11695, -2.1319); [4](1.33942, -3.472); [5](1.52885, -2.46979); [6](1.56466, -0.0358016); [7](2.02807, -0.558102); [8](2.34917, 1.00406); [9](2.51877, -1.94794); [10](2.95973, -1.06118); [11](3.36119, -3.71927); [12](3.83009, -1.04409); [13](3.91026, 1.04294); [14](4.25234, -0.800966); [15](4.77749, -0.461738); [16](5.43338, -0.520936); [17](5.54091, -1.07405); [18](5.81939, -0.573153)
+
+with Lund coordinates for the secondary plane (from primary declustering [8]):
+[0](2.95691, -1.89881); [1](3.39155, -1.95856); [2](3.87725, -1.79439)
+
+Lund coordinates ( ln 1/Delta, ln kt ) of declusterings of jet 1 are:
+[0](0.108166, 0.409011); [1](0.478032, -0.762435); [2](0.5522, 1.69309); [3](0.814643, -0.89172); [4](0.87725, 0.291102); [5](1.17301, 0.430816); [6](1.46257, -2.02855); [7](2.04689, -3.19764); [8](2.19256, -0.828099); [9](2.86474, -1.09304); [10](2.98768, -1.21793); [11](3.3634, -0.355632); [12](4.17428, -0.227052); [13](4.59144, 0.645512); [14](4.86343, -2.29314); [15](5.8172, -2.47791)
+
+with Lund coordinates for the secondary plane (from primary declustering [12]):
+
Index: contrib/contribs/LundPlane/tags/2.0.3/jets.json
===================================================================
--- contrib/contribs/LundPlane/tags/2.0.3/jets.json (revision 0)
+++ contrib/contribs/LundPlane/tags/2.0.3/jets.json (revision 1345)
@@ -0,0 +1,2 @@
+[{"p_pt":983.387,"p_m":39.9912,"h_pt":983.065,"s_pt":0.356448,"z":0.000362457,"Delta":0.68262,"kt":0.243318,"psi":-2.27417},{"p_pt":983.065,"p_m":35.4172,"h_pt":982.621,"s_pt":0.461349,"z":0.000469289,"Delta":0.527174,"kt":0.243211,"psi":-1.02664},{"p_pt":982.621,"p_m":32.8883,"h_pt":981.294,"s_pt":1.34048,"z":0.00136417,"Delta":0.442638,"kt":0.593347,"psi":1.90151},{"p_pt":981.294,"p_m":28.3702,"h_pt":980.937,"s_pt":0.362421,"z":0.000369328,"Delta":0.327275,"kt":0.118611,"psi":0.992173},{"p_pt":980.937,"p_m":27.6178,"h_pt":980.823,"s_pt":0.118531,"z":0.000120834,"Delta":0.261998,"kt":0.0310549,"psi":-0.211632},{"p_pt":980.823,"p_m":27.4721,"h_pt":980.44,"s_pt":0.39026,"z":0.000397887,"Delta":0.216785,"kt":0.0846025,"psi":-2.67709},{"p_pt":980.44,"p_m":27.1382,"h_pt":975.839,"s_pt":4.61293,"z":0.0047049,"Delta":0.209158,"kt":0.964832,"psi":1.92125},{"p_pt":975.839,"p_m":22.6675,"h_pt":971.523,"s_pt":4.34909,"z":0.00445662,"Delta":0.131589,"kt":0.572294,"psi":0.338527},{"p_pt":971.523,"p_m":20.8426,"h_pt":943.03,"s_pt":28.5948,"z":0.0294298,"Delta":0.0954486,"kt":2.72933,"psi":2.68233},{"p_pt":943.03,"p_m":11.414,"h_pt":941.26,"s_pt":1.76973,"z":0.00187664,"Delta":0.0805586,"kt":0.142567,"psi":1.69815},{"p_pt":941.26,"p_m":10.9196,"h_pt":934.585,"s_pt":6.67619,"z":0.00709282,"Delta":0.0518329,"kt":0.346046,"psi":-1.28412},{"p_pt":934.585,"p_m":9.95054,"h_pt":933.886,"s_pt":0.699017,"z":0.000747944,"Delta":0.0346941,"kt":0.0242518,"psi":-0.167118},{"p_pt":933.886,"p_m":9.90727,"h_pt":917.674,"s_pt":16.2161,"z":0.017364,"Delta":0.0217076,"kt":0.352012,"psi":-2.98636},{"p_pt":917.674,"p_m":8.70484,"h_pt":776.048,"s_pt":141.627,"z":0.154333,"Delta":0.0200353,"kt":2.83755,"psi":-1.32753},{"p_pt":776.048,"p_m":4.85364,"h_pt":744.504,"s_pt":31.5438,"z":0.0406467,"Delta":0.0142308,"kt":0.448895,"psi":1.2169},{"p_pt":744.504,"p_m":3.50525,"h_pt":669.635,"s_pt":74.87,"z":0.100563,"Delta":0.00841709,"kt":0.630187,"psi":2.33366},{"p_pt":669.635,"p_m":1.98393,"h_pt":533.665,"s_pt":135.971,"z":0.203052,"Delta":0.00436831,"kt":0.593964,"psi":-0.741957},{"p_pt":533.665,"p_m":1.39886,"h_pt":446.581,"s_pt":87.0835,"z":0.16318,"Delta":0.00392294,"kt":0.341623,"psi":1.56933},{"p_pt":446.581,"p_m":1.01822,"h_pt":256.731,"s_pt":189.851,"z":0.42512,"Delta":0.00296941,"kt":0.563745,"psi":0.535213}]
+[{"p_pt":908.098,"p_m":87.7124,"h_pt":906.441,"s_pt":1.67729,"z":0.00184699,"Delta":0.897478,"kt":1.50533,"psi":-1.74757},{"p_pt":906.441,"p_m":79.121,"h_pt":905.698,"s_pt":0.752464,"z":0.000830121,"Delta":0.620002,"kt":0.466529,"psi":1.82802},{"p_pt":905.698,"p_m":76.7744,"h_pt":897.753,"s_pt":9.44311,"z":0.0104091,"Delta":0.575682,"kt":5.43623,"psi":0.0793599},{"p_pt":897.753,"p_m":41.7543,"h_pt":896.907,"s_pt":0.925819,"z":0.00103117,"Delta":0.442797,"kt":0.40995,"psi":2.81067},{"p_pt":896.907,"p_m":38.1389,"h_pt":893.73,"s_pt":3.21669,"z":0.00358627,"Delta":0.415925,"kt":1.3379,"psi":-1.18555},{"p_pt":893.73,"p_m":26.2828,"h_pt":888.803,"s_pt":4.97201,"z":0.00556294,"Delta":0.309435,"kt":1.53851,"psi":-2.02065},{"p_pt":888.803,"p_m":12.7422,"h_pt":888.25,"s_pt":0.567807,"z":0.000638834,"Delta":0.23164,"kt":0.131527,"psi":-3.02721},{"p_pt":888.25,"p_m":11.5241,"h_pt":887.935,"s_pt":0.3164,"z":0.000356205,"Delta":0.129135,"kt":0.0408584,"psi":-0.509985},{"p_pt":887.935,"p_m":11.3171,"h_pt":884.026,"s_pt":3.91361,"z":0.00440752,"Delta":0.111631,"kt":0.436879,"psi":2.01504},{"p_pt":884.026,"p_m":8.95196,"h_pt":878.154,"s_pt":5.88085,"z":0.00665227,"Delta":0.0569981,"kt":0.335197,"psi":2.92986},{"p_pt":878.154,"p_m":7.93364,"h_pt":872.286,"s_pt":5.86934,"z":0.00668371,"Delta":0.0504045,"kt":0.295841,"psi":-1.28543},{"p_pt":872.286,"p_m":7.04265,"h_pt":852.055,"s_pt":20.2422,"z":0.0232056,"Delta":0.0346173,"kt":0.700731,"psi":0.0528261},{"p_pt":852.055,"p_m":5.24347,"h_pt":800.269,"s_pt":51.7916,"z":0.060784,"Delta":0.0153863,"kt":0.79688,"psi":-3.13262},{"p_pt":800.269,"p_m":4.03811,"h_pt":612.176,"s_pt":188.097,"z":0.235041,"Delta":0.0101382,"kt":1.90696,"psi":0.854257},{"p_pt":612.176,"p_m":0.796087,"h_pt":599.106,"s_pt":13.0696,"z":0.0213494,"Delta":0.00772393,"kt":0.100949,"psi":-1.93659},{"p_pt":599.106,"p_m":0.403809,"h_pt":570.907,"s_pt":28.199,"z":0.0470685,"Delta":0.00297593,"kt":0.0839182,"psi":0.118626}]
Index: contrib/contribs/LundPlane/tags/2.0.3/read_lund_json.py
===================================================================
--- contrib/contribs/LundPlane/tags/2.0.3/read_lund_json.py (revision 0)
+++ contrib/contribs/LundPlane/tags/2.0.3/read_lund_json.py (revision 1345)
@@ -0,0 +1,225 @@
+#----------------------------------------------------------------------
+# $Id$
+#
+# Copyright (c) 2018-, Frederic A. Dreyer, Keith Hamilton, Alexander Karlberg,
+# Gavin P. Salam, Ludovic Scyboz, Gregory Soyez, Rob Verheyen
+#
+#----------------------------------------------------------------------
+# This file is part of FastJet contrib.
+#
+# It is free software; you can redistribute it and/or modify it under
+# the terms of the GNU General Public License as published by the
+# Free Software Foundation; either version 2 of the License, or (at
+# your option) any later version.
+#
+# It is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+# or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
+# License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this code. If not, see <http://www.gnu.org/licenses/>.
+#----------------------------------------------------------------------
+
+from abc import ABC, abstractmethod
+import numpy as np
+from math import log, ceil, cos, sin
+import json, gzip, sys
+
+#======================================================================
+class Reader(object):
+ """
+ Reader for files consisting of a sequence of json objects, one per
+ line Any pure string object is considered to be part of a header
+ (even if it appears at the end!).
+
+ Once you have created a Reader, it is a standard Python iterable
+ object. Each iteration gives the json entry for one jet's
+ declustering.
+ """
+ #----------------------------------------------------------------------
+ def __init__(self, infile, nmax = -1):
+ self.infile = infile
+ self.nmax = nmax
+ self.reset()
+
+ #----------------------------------------------------------------------
+ def set_nmax(self, nmax):
+ self.nmax = nmax
+
+ #----------------------------------------------------------------------
+ def reset(self):
+ """
+ Reset the reader to the start of the file, clear the header and event count.
+ """
+ if self.infile.endswith('.gz'):
+ self.stream = gzip.open(self.infile,'r')
+ else:
+ self.stream = open(self.infile,'r')
+ self.n = 0
+ self.header = []
+
+ #----------------------------------------------------------------------
+ def __iter__(self):
+ # needed for iteration to work
+ return self
+
+ #----------------------------------------------------------------------
+ def __next__(self):
+ ev = self.next_event()
+ if (ev is None): raise StopIteration
+ else : return ev
+
+ #----------------------------------------------------------------------
+ def next(self): return self.__next__()
+
+ #----------------------------------------------------------------------
+ def next_event(self):
+
+ # we have hit the maximum number of events
+ if (self.n == self.nmax):
+ #print ("# Exiting after having read nmax jet declusterings")
+ return None
+
+ try:
+ line = self.stream.readline()
+ if self.infile.endswith('.gz'):
+ j = json.loads(line.decode('utf-8'))
+ else:
+ j = json.loads(line)
+ except IOError:
+ print("# got to end with IOError (maybe gzip structure broken?) around event", self.n, file=sys.stderr)
+ return None
+ except EOFError:
+ print("# got to end with EOFError (maybe gzip structure broken?) around event", self.n, file=sys.stderr)
+ return None
+ except ValueError:
+ print("# got to end with ValueError (empty json entry?) around event", self.n, file=sys.stderr)
+ return None
+
+ # skip this
+ if (type(j) is str):
+ self.header.append(j)
+ return self.next_event()
+ self.n += 1
+ return j
+
+#======================================================================
+class Image(ABC):
+ """
+ Abstract base class for batch processing Lund declusterings
+ """
+ def __init__(self, infile, nmax=-1):
+ if (type(infile) is Reader):
+ self.reader = infile
+ self.reader.set_nmax(nmax)
+ else:
+ self.reader = Reader(infile, nmax)
+
+ #----------------------------------------------------------------------
+ @abstractmethod
+ def process(self, event):
+ pass
+
+ #----------------------------------------------------------------------
+ def values(self):
+ """Return the values of each event in the reader."""
+ res = []
+ while True:
+ event = self.reader.next_event()
+ if event!=None:
+ res.append(self.process(event))
+ else:
+ break
+ self.reader.reset()
+ return res
+
+
+#======================================================================
+class LundImage(Image):
+ """
+ Class to take input file (or a reader) of jet declusterings in json
+ format, one json entry per line, and transform it into lund images.
+
+ - infile: a filename or a reader
+ - nmax: the maximum number of jets to process
+ - npxl: the number of bins (pixels) in each dimension
+ - xval: the range of x (ln 1/Delta) values
+ - yval: the range of y (ln kt) values
+
+ Once you've created the class, call values() (inherited the abstract
+ base class) and you will get a python list of images (formatted as
+ 2d numpy arrays).
+ """
+ #----------------------------------------------------------------------
+ def __init__(self, infile, nmax, npxl, xval = [0.0, 7.0], yval = [-3.0, 7.0]):
+ Image.__init__(self, infile, nmax)
+ self.npxl = npxl
+ self.xmin = xval[0]
+ self.ymin = yval[0]
+ self.x_pxl_wdth = (xval[1] - xval[0])/npxl
+ self.y_pxl_wdth = (yval[1] - yval[0])/npxl
+
+ #----------------------------------------------------------------------
+ def process(self, event):
+ """Process an event and return an image of the primary Lund plane."""
+ res = np.zeros((self.npxl,self.npxl))
+
+ for declust in event:
+ x = log(1.0/declust['Delta'])
+ y = log(declust['kt'])
+ psi = declust['psi']
+ xind = ceil((x - self.xmin)/self.x_pxl_wdth - 1.0)
+ yind = ceil((y - self.ymin)/self.y_pxl_wdth - 1.0)
+ # print((x - self.xmin)/self.x_pxl_wdth,xind,
+ # (y - self.ymin)/self.y_pxl_wdth,yind,':',
+ # declust['delta_R'],declust['pt2'])
+ if (max(xind,yind) < self.npxl and min(xind, yind) >= 0):
+ res[xind,yind] += 1
+ return res
+
+#======================================================================
+class LundDense(Image):
+ """
+ Class to take input file (or a reader) of jet declusterings in json
+ format, one json entry per line, and reduces them to the minimal
+ information needed as an input to LSTM or dense network learning.
+
+ - infile: a filename or a reader
+ - nmax: the maximum number of jets to process
+ - nlen: the size of the output array (for each jet), zero padded
+ if the declustering sequence is shorter; if the declustering
+ sequence is longer, entries beyond nlen are discarded.
+
+ Calling values() returns a python list, each entry of which is a
+ numpy array of dimension (nlen,2). values()[i,:] =
+ (log(1/Delta),log(kt)) for declustering i.
+ """
+ #----------------------------------------------------------------------
+ def __init__(self,infile, nmax, nlen):
+ Image.__init__(self, infile, nmax)
+ self.nlen = nlen
+
+ #----------------------------------------------------------------------
+ def process(self, event):
+ """Process an event and return an array of declusterings."""
+ res = np.zeros((self.nlen, 2))
+ # go over the declusterings and fill the res array
+ # with the Lund coordinates
+ for i in range(self.nlen):
+ if (i >= len(event)):
+ break
+ res[i,:] = self.fill_declust(event[i])
+
+ return res
+
+ #----------------------------------------------------------------------
+ def fill_declust(self,declust):
+ """
+ Create an array of size two and fill it with the Lund coordinates
+ (log(1/Delta),log(kt)).
+ """
+ res = np.zeros(2)
+ res[0] = log(1.0/declust['Delta'])
+ res[1] = log(declust['kt'])
+ return res
Property changes on: contrib/contribs/LundPlane/tags/2.0.3/read_lund_json.py
___________________________________________________________________
Added: svn:keywords
## -0,0 +1 ##
+Id
\ No newline at end of property
Index: contrib/contribs/LundPlane/tags/2.0.3/example.cc
===================================================================
--- contrib/contribs/LundPlane/tags/2.0.3/example.cc (revision 0)
+++ contrib/contribs/LundPlane/tags/2.0.3/example.cc (revision 1345)
@@ -0,0 +1,119 @@
+//----------------------------------------------------------------------
+/// \file example.cc
+///
+/// This example program is meant to illustrate how the
+/// fastjet::contrib::LundGenerator class is used.
+///
+/// Run this example with
+///
+/// \verbatim
+/// ./example < ../data/single-event.dat
+/// \endverbatim
+
+//----------------------------------------------------------------------
+// $Id$
+//
+// Copyright (c) 2018-, Frederic A. Dreyer, Keith Hamilton, Alexander Karlberg,
+// Gavin P. Salam, Ludovic Scyboz, Gregory Soyez, Rob Verheyen
+//
+//----------------------------------------------------------------------
+// This file is part of FastJet contrib.
+//
+// It is free software; you can redistribute it and/or modify it under
+// the terms of the GNU General Public License as published by the
+// Free Software Foundation; either version 2 of the License, or (at
+// your option) any later version.
+//
+// It is distributed in the hope that it will be useful, but WITHOUT
+// ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+// or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
+// License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this code. If not, see <http://www.gnu.org/licenses/>.
+//----------------------------------------------------------------------
+
+#include <iostream>
+#include <fstream>
+#include <sstream>
+
+#include "fastjet/PseudoJet.hh"
+#include <string>
+#include "LundGenerator.hh" // In external code, this should be fastjet/contrib/LundGenerator.hh
+#include "LundJSON.hh" // In external code, this should be fastjet/contrib/LundJSON.hh
+using namespace std;
+using namespace fastjet;
+
+// forward declaration to make things clearer
+void read_event(vector<PseudoJet> &event);
+
+//----------------------------------------------------------------------
+int main(){
+
+ //----------------------------------------------------------
+ // read in input particles
+ vector<PseudoJet> event;
+ read_event(event);
+ string filename = "jets.json";
+ cout << "# read an event with " << event.size() << " particles" << endl;
+ cout << "# writing declusterings of primary and secondary plane to file "
+ << filename << endl;
+
+ ofstream outfile;
+ outfile.open(filename.c_str());
+
+ // first get some anti-kt jets
+ double R = 1.0, ptmin = 100.0;
+ JetDefinition jet_def(antikt_algorithm, R);
+ ClusterSequence cs(event, jet_def);
+ vector<PseudoJet> jets = sorted_by_pt(cs.inclusive_jets(ptmin));
+
+ //----------------------------------------------------------
+ // create an instance of LundGenerator, with default options
+ contrib::LundGenerator lund;
+
+ cout << lund.description() << endl;
+
+ for (unsigned ijet = 0; ijet < jets.size(); ijet++) {
+ cout << endl << "Lund coordinates ( ln 1/Delta, ln kt ) of declusterings of jet "
+ << ijet << " are:" << endl;
+ vector<contrib::LundDeclustering> declusts = lund(jets[ijet]);
+
+ for (int idecl = 0; idecl < declusts.size(); idecl++) {
+ pair<double,double> coords = declusts[idecl].lund_coordinates();
+ cout << "(" << coords.first << ", " << coords.second << ")";
+ if (idecl < declusts.size() - 1) cout << "; ";
+ }
+
+ cout << endl;
+
+ // outputs the primary Lund plane
+ lund_to_json(outfile, declusts); outfile << endl;
+ // outputs the full Lund tree
+ //to_json(cout, lund_gen, jets[ijet]); cout << endl;
+ }
+
+ cout << endl << "File " << filename << " written." << endl;
+
+
+
+ return 0;
+}
+
+// read in input particles
+void read_event(vector<PseudoJet> &event){
+ string line;
+ while (getline(cin, line)) {
+ istringstream linestream(line);
+ // take substrings to avoid problems when there is extra "pollution"
+ // characters (e.g. line-feed).
+ if (line.substr(0,4) == "#END") {return;}
+ if (line.substr(0,1) == "#") {continue;}
+ double px,py,pz,E;
+ linestream >> px >> py >> pz >> E;
+ PseudoJet particle(px,py,pz,E);
+
+ // push event onto back of full_event vector
+ event.push_back(particle);
+ }
+}
Property changes on: contrib/contribs/LundPlane/tags/2.0.3/example.cc
___________________________________________________________________
Added: svn:keywords
## -0,0 +1 ##
+Id
\ No newline at end of property
Index: contrib/contribs/LundPlane/tags/2.0.3/example.py
===================================================================
--- contrib/contribs/LundPlane/tags/2.0.3/example.py (revision 0)
+++ contrib/contribs/LundPlane/tags/2.0.3/example.py (revision 1345)
@@ -0,0 +1,84 @@
+#!/usr/bin/env python3
+#
+#----------------------------------------------------------------------
+# $Id$
+#
+# Copyright (c) 2018-, Frederic A. Dreyer, Keith Hamilton, Alexander Karlberg,
+# Gavin P. Salam, Ludovic Scyboz, Gregory Soyez, Rob Verheyen
+#
+#----------------------------------------------------------------------
+# This file is part of FastJet contrib.
+#
+# It is free software; you can redistribute it and/or modify it under
+# the terms of the GNU General Public License as published by the
+# Free Software Foundation; either version 2 of the License, or (at
+# your option) any later version.
+#
+# It is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+# or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
+# License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this code. If not, see <http://www.gnu.org/licenses/>.
+#----------------------------------------------------------------------
+#
+# Load a sample file and plot it.
+#
+# Usage:
+# python3 example.py [--file filename] [--bkg file_bkg]
+# [--njet njet] [--npxl npixels]
+#
+
+import read_lund_json as lund
+#from import LundImage
+from matplotlib.colors import LogNorm
+import numpy as np
+import matplotlib.pyplot as plt
+import argparse
+
+parser = argparse.ArgumentParser(description='Plot lund images')
+parser.add_argument('--file', action = 'store', default = 'jets.json')
+parser.add_argument('--njet', type = int, default = 2, help='Maximum number of jets to analyse')
+parser.add_argument('--npxl', type = int, default = 25, help="Number of pixels in each dimension of the image")
+
+args = parser.parse_args()
+
+# set up the reader and get array from file
+xval = [0.0, 3.0]
+yval = [-3.0, 5.0]
+
+# start by creating a reader for the json file produced by example.cc
+# (one json entry per line, correspond to one jet per json entry)
+reader = lund.Reader(args.file, args.njet)
+
+# Then examine the jets it contains
+print ("Contents of the file", args.file)
+for jet in reader:
+ # jet is an array of declusterings.
+ # The jet's pt can be obtained by looking at the first declustering (jet[0])
+ # and extracting the subjet-pair pt ("p_pt")
+ print(" Jet with pt = {:6.1f} GeV with {:3d} primary Lund-plane declusterings".format(jet[0]["p_pt"], len(jet)))
+print()
+
+# Reset the reader to the start and use it with a helper
+# class to extract an image for each jet
+reader.reset()
+image_generator = lund.LundImage(reader, args.njet, args.npxl, xval, yval)
+images = image_generator.values()
+
+# Get the average of the images
+print("Now creating average lund image from the {} jets".format(len(images)))
+avg_img = np.average(images,axis=0)
+
+# Plot the result
+fig=plt.figure(figsize=(6, 4.5))
+plt.title('Averaged Lund image')
+plt.xlabel('$\ln(R / \Delta)$')
+plt.ylabel('$\ln(k_t / \mathrm{GeV})$')
+plt.imshow(avg_img.transpose(), origin='lower', aspect='auto',
+ extent=xval+yval, cmap=plt.get_cmap('BuPu'))
+plt.colorbar()
+
+print("Close the viewer window to exit")
+plt.show()
Property changes on: contrib/contribs/LundPlane/tags/2.0.3/example.py
___________________________________________________________________
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Added: svn:keywords
## -0,0 +1 ##
+Id
\ No newline at end of property
Index: contrib/contribs/LundPlane/tags/2.0.3
===================================================================
--- contrib/contribs/LundPlane/tags/2.0.3 (revision 1344)
+++ contrib/contribs/LundPlane/tags/2.0.3 (revision 1345)
Property changes on: contrib/contribs/LundPlane/tags/2.0.3
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,18 ##
+# Added by svn-ignore on 2018-08-23
+example
+example_secondary
+
+# Added by svn-ignore on 2022-10-04
+example_dpsi_slice
+
+# Added by svn-ignore on 2022-10-04
+example_dpsi_collinear
+
+# Added by svn-ignore on 2022-10-04
+example_dpsi_slice.diff
+example_secondary.diff
+example_dpsi_collinear.diff
+Makefile.bak
+
+# Added by svn-ignore on 2022-10-04
+example.diff

File Metadata

Mime Type
text/x-diff
Expires
Tue, Nov 19, 7:50 PM (1 d, 7 h)
Storage Engine
blob
Storage Format
Raw Data
Storage Handle
3805925
Default Alt Text
(131 KB)

Event Timeline