S95tables_type3.F90
No OneTemporary
Actions

Size

26 KB

Subscribers

None

S95tables_type3.F90
View Options

	! This file is part of HiggsBounds
	! -KW
	!******************************************************************
	module S95tables_type3
	!******************************************************************
	use S95tables_type2
	implicit none

	!'checktables' checks that the tables being read in from the
	!text files are in the expected input.
	!Now that we have the binary form of the tables, it's not so important
	!to speed up the reading in of the text tables.
	!Therefore, might as well leave checktables defined
	#define checktables

	!oldformat is without the columns Mspecial M0
	!#define oldformat

	!table type 3------------------------------
	type table3
	double precision :: xmax1,xmin1,xmax2,xmin2,sep1,sep2,deltax
	double precision :: zmin,zmax,zsep
	integer :: id,nx1,nx2,nz
	integer :: type_of_assoc_table,id_of_assoc_table
	logical :: needs_M2_gt_2M1
	double precision, allocatable :: dat(:,:,:)
	end type
	!------------------------------------------

	integer,parameter :: ntable3=10

	integer,parameter :: skip=3
	#ifdef SETCLSBTABLEDIR
	character(len=100),parameter :: pathtofolder=SETCLSBTABLEDIR
	#else
	character(len=100),parameter :: pathtofolder='/home/Karina/Work/HiggsBounds/clsb_tables/'
	#endif
	double precision,parameter :: deltaMhinfilename=10.0D0 ! results split into sections of size deltaMhinfilename. check carefully if deltaMhinfilename is not a whole number
	integer,parameter :: deltaMhinfilenamebits=5 !which is then split into 5 sections

	integer,parameter :: clsb_t3_dat_3rdcol_clsb =1
	integer,parameter :: clsb_t3_dat_3rdcol_chisq =2

	#ifdef oldformat
	integer,parameter :: size_of_third_dim_of_dat=2
	integer,parameter :: clsb_t3_dat_3rdcol_Mspecial =0
	integer,parameter :: clsb_t3_dat_3rdcol_M0 =0
	#else
	integer,parameter :: size_of_third_dim_of_dat=4
	integer,parameter :: clsb_t3_dat_3rdcol_Mspecial =3
	integer,parameter :: clsb_t3_dat_3rdcol_M0 =4
	#endif

	character(len=300),allocatable :: filename(:)
	character(len=100) :: foldername

	!----------------------------------
	type(table3),allocatable :: clsb_t3(:)
	!----------------------------------

	integer,parameter :: file_id_3=10 !same as file_id_common in usefulbits.f90

	contains

	!************************************************************
	subroutine initializetables_type3_blank(tablet3)
	!***********************************************************
	! still leaves dat unallocated
	integer:: i
	type(table3) :: tablet3(:)

	do i=lbound(tablet3,dim=1),ubound(tablet3,dim=1)
	tablet3(i)%xmax1 = -1.0D0
	tablet3(i)%xmax2 = -1.0D0
	tablet3(i)%xmin1 = -1.0D0
	tablet3(i)%xmin2 = -1.0D0
	tablet3(i)%sep1 = -1.0D0
	tablet3(i)%sep2 = -1.0D0
	tablet3(i)%deltax = -1.0D0

	tablet3(i)%zmin = -1.0D0
	tablet3(i)%zmax = -1.0D0
	tablet3(i)%zsep = -1.0D0

	tablet3(i)%id = -1
	tablet3(i)%nx1 = -1
	tablet3(i)%nx2 = -1
	tablet3(i)%nz = -1

	tablet3(i)%type_of_assoc_table = -1
	tablet3(i)%id_of_assoc_table = -1
	tablet3(i)%needs_M2_gt_2M1 = .False.
	enddo

	end subroutine initializetables_type3_blank

	!************************************************************
	subroutine initializetables3(clsb_t3)
	!***********************************************************
	implicit none

	!--------------------------------------input
	type(table3) :: clsb_t3(:)
	!-----------------------------------internal
	integer :: x,xbeg,xend
	double precision :: small
	!-------------------------------------------
	small=1.0D-4

	xbeg=lbound(clsb_t3,dim=1)
	xend=ubound(clsb_t3,dim=1)

	allocate(filename(xbeg:xend))
	x=xbeg-1

	x=x+1
	filename(x) = 'h2h1_bbbb_090307_1_prodah_dechbb'
	clsb_t3(x)%id = 1800
	clsb_t3(x)%type_of_assoc_table = 2
	clsb_t3(x)%id_of_assoc_table = 180
	clsb_t3(x)%xmax2 = 180.0D0
	clsb_t3(x)%xmin2 = 1.0D0
	clsb_t3(x)%xmax1 = 180.0D0
	clsb_t3(x)%xmin1 = 1.0D0
	clsb_t3(x)%sep1 = 1.0D0
	clsb_t3(x)%sep2 = 1.0D0

	x=x+1
	filename(x) = 'h2h1_bbtt_090307_1_prodah_dechbt'
	clsb_t3(x)%id = 2300
	clsb_t3(x)%type_of_assoc_table = 2
	clsb_t3(x)%id_of_assoc_table = 230
	clsb_t3(x)%xmax2 = 180.0D0
	clsb_t3(x)%xmin2 = 1.0D0
	clsb_t3(x)%xmax1 = 180.0D0
	clsb_t3(x)%xmin1 = 1.0D0
	clsb_t3(x)%sep1 = 1.0D0
	clsb_t3(x)%sep2 = 1.0D0

	x=x+1
	filename(x) = 'h2h1_tatatata_090307_1_prodah_dechtata'
	clsb_t3(x)%id = 1900
	clsb_t3(x)%type_of_assoc_table = 2
	clsb_t3(x)%id_of_assoc_table = 190
	clsb_t3(x)%xmax2 = 180.0D0
	clsb_t3(x)%xmin2 = 1.0D0
	clsb_t3(x)%xmax1 = 180.0D0
	clsb_t3(x)%xmin1 = 1.0D0
	clsb_t3(x)%sep1 = 1.0D0
	clsb_t3(x)%sep2 = 1.0D0

	x=x+1
	filename(x) = 'h2h1_ttbb_090307_1_prodah_dechtb'
	clsb_t3(x)%id = 2400
	clsb_t3(x)%type_of_assoc_table = 2
	clsb_t3(x)%id_of_assoc_table = 240
	clsb_t3(x)%xmax2 = 180.0D0
	clsb_t3(x)%xmin2 = 1.0D0
	clsb_t3(x)%xmax1 = 180.0D0
	clsb_t3(x)%xmin1 = 1.0D0
	clsb_t3(x)%sep1 = 1.0D0
	clsb_t3(x)%sep2 = 1.0D0

	x=x+1
	filename(x) = 'h2h1_h1h1h1_090307_1_prodah_dechaa'
	clsb_t3(x)%id = 2000
	clsb_t3(x)%type_of_assoc_table = 2
	clsb_t3(x)%id_of_assoc_table = 200
	clsb_t3(x)%xmax2 = 180.0D0
	clsb_t3(x)%xmin2 = 1.0D0 ! except there's no numbers for this since Mh2 must be > Mh1
	clsb_t3(x)%xmax1 = 90.0D0
	clsb_t3(x)%xmin1 = 1.0D0
	clsb_t3(x)%sep1 = 1.0D0
	clsb_t3(x)%sep2 = 1.0D0

	x=x+1
	filename(x) = 'h2h1_tttttt_090307_1_prodah_dechtttttt'
	clsb_t3(x)%id = 2100
	clsb_t3(x)%type_of_assoc_table = 2
	clsb_t3(x)%id_of_assoc_table = 210
	clsb_t3(x)%xmax2 = 180.0D0
	clsb_t3(x)%xmin2 = 1.0D0 ! except there's no numbers for this since Mh2 must be > Mh1
	clsb_t3(x)%xmax1 = 90.0D0
	clsb_t3(x)%xmin1 = 1.0D0
	clsb_t3(x)%sep1 = 1.0D0
	clsb_t3(x)%sep2 = 1.0D0

	!taken out temporily, because S95_t2 id 220 has also been taken out (see
	!notes for table S95_t2 id 220
	!x=x+1
	!filename(x) = 'h2z_bbttz_090307_1_prodzh_dechbbtt'
	!clsb_t3(x)%id = 2200
	!clsb_t3(x)%type_of_assoc_table = 2
	!clsb_t3(x)%id_of_assoc_table = 220
	!clsb_t3(x)%xmax2 = 180.0D0
	!clsb_t3(x)%xmin2 = 1.0D0 ! except there's no numbers for this since Mh2 must be > Mh1
	!clsb_t3(x)%xmax1 = 90.0D0
	!clsb_t3(x)%xmin1 = 1.0D0
	!clsb_t3(x)%sep1 = 1.0D0
	!clsb_t3(x)%sep2 = 1.0D0

	x=x+1
	filename(x) = 'h2z_h1h1z_090307_1_prodzh_dechaa'
	clsb_t3(x)%id = 1500
	clsb_t3(x)%type_of_assoc_table = 2
	clsb_t3(x)%id_of_assoc_table = 150
	clsb_t3(x)%xmax2 = 180.0D0
	clsb_t3(x)%xmin2 = 1.0D0 ! except there's no numbers for this since Mh2 must be > Mh1
	clsb_t3(x)%xmax1 = 90.0D0
	clsb_t3(x)%xmin1 = 1.0D0
	clsb_t3(x)%sep1 = 1.0D0
	clsb_t3(x)%sep2 = 1.0D0

	x=x+1
	filename(x) = 'h2z_ttttz_090307_1_prodzh_dechtttt'
	clsb_t3(x)%id = 1600
	clsb_t3(x)%type_of_assoc_table = 2
	clsb_t3(x)%id_of_assoc_table = 160
	clsb_t3(x)%xmax2 = 180.0D0
	clsb_t3(x)%xmin2 = 1.0D0 ! except there's no numbers for this since Mh2 must be > Mh1
	clsb_t3(x)%xmax1 = 90.0D0
	clsb_t3(x)%xmin1 = 1.0D0
	clsb_t3(x)%sep1 = 1.0D0
	clsb_t3(x)%sep2 = 1.0D0

	x=x+1
	filename(x) = 'h2z_bbz_090307_1_prodzh_dechbb'
	clsb_t3(x)%id = 1420
	clsb_t3(x)%type_of_assoc_table = 1
	clsb_t3(x)%id_of_assoc_table = 142
	clsb_t3(x)%xmax1 = 180.0D0
	clsb_t3(x)%xmin1 = 0.1D0
	clsb_t3(x)%xmax2 = 20.0D0
	clsb_t3(x)%xmin2 = 20.0D0
	clsb_t3(x)%sep2 = 1.0D0 !doesn't matter what this value is as long as it is not zero
	clsb_t3(x)%sep1 = 0.1D0

	x=x+1
	filename(x) = 'h2z_tataz_090307_1_prodzh_dechtata'
	clsb_t3(x)%id = 1430
	clsb_t3(x)%type_of_assoc_table = 1
	clsb_t3(x)%id_of_assoc_table = 143
	clsb_t3(x)%xmax1 = 180.0D0
	clsb_t3(x)%xmin1 = 0.1D0
	clsb_t3(x)%xmax2 = 20.0D0
	clsb_t3(x)%xmin2 = 20.0D0
	clsb_t3(x)%sep2 = 1.0D0 !doesn't matter what this value is as long as it is not zero
	clsb_t3(x)%sep1 = 0.1D0

	! checks we've filled the whole array
	if(x.ne.xend)then
	stop'error in initializetables3 (a)'
	endif

	do x=xbeg,xend
	clsb_t3(x)%zmin = -3.0D0
	clsb_t3(x)%zmax = 0.03D0
	clsb_t3(x)%zsep = 0.03D0

	clsb_t3(x)%nx2 = nint((clsb_t3(x)%xmax2-clsb_t3(x)%xmin2)/clsb_t3(x)%sep2)+1
	clsb_t3(x)%nx1 = nint((clsb_t3(x)%xmax1-clsb_t3(x)%xmin1)/clsb_t3(x)%sep1)+1
	clsb_t3(x)%nz = nint((clsb_t3(x)%zmax -clsb_t3(x)%zmin )/clsb_t3(x)%zsep)+1

	if(abs(clsb_t3(x)%sep1).lt.small)stop'problem in subroutine initializetables3 b1'
	if(abs(clsb_t3(x)%sep2).lt.small)stop'problem in subroutine initializetables3 b2'
	if(abs(clsb_t3(x)%zsep).lt.small)stop'problem in subroutine initializetables3 b3'
	if(clsb_t3(x)%xmax1.lt.clsb_t3(x)%xmin1)stop'problem in subroutine initializetables3 b4'
	if(clsb_t3(x)%xmax2.lt.clsb_t3(x)%xmin2)stop'problem in subroutine initializetables3 b5'
	if(clsb_t3(x)%zmax .lt.clsb_t3(x)%zmin )stop'problem in subroutine initializetables3 b6'

	!problem: can't set clsb_t3(x)%needs_M2_gt_2M1 here because it needs
	!S95_t2
	!if(clsb_t3(x)%type_of_assoc_table.eq.2)then
	! table2num=t2elementnumberfromid(S95_t2,clsb_t3(x)%id_of_assoc_table)
	! clsb_t3(x)%needs_M2_gt_2M1 = S95_t2(table2num)%needs_M2_gt_2M1
	!endif
	!instead, call fillt3needs_M2_gt_2M1

	enddo

	end subroutine initializetables3
	!***********************************************************
	subroutine fillt3needs_M2_gt_2M1(t3,t2)
	!--------------------------------------input
	type(table3) :: t3(:)
	type(table2), intent(in) :: t2(:)
	!-----------------------------------internal
	integer :: n,x
	!-------------------------------------------

	do x=lbound(t3,dim=1),ubound(t3,dim=1)
	if(t3(x)%type_of_assoc_table.eq.2)then
	n=t2elementnumberfromid(t2,t3(x)%id_of_assoc_table)
	t3(x)%needs_M2_gt_2M1 = t2(n)%needs_M2_gt_2M1
	endif
	enddo

	end subroutine fillt3needs_M2_gt_2M1
	!***********************************************************
	function t3elementnumberfromid(t3,id)
	!--------------------------------------input
	type(table3), intent(in) :: t3(:)
	integer, intent(in) :: id
	!-----------------------------------function
	integer :: t3elementnumberfromid
	!-----------------------------------internal
	integer :: n,x
	!-------------------------------------------

	n=0
	do x=lbound(t3,dim=1),ubound(t3,dim=1)
	if(t3(x)%id.eq.id)then
	n=n+1
	t3elementnumberfromid=x
	endif
	enddo

	if(n.ne.1)stop'problem in function t3elementnumberfromid 1'

	end function t3elementnumberfromid

	!***********************************************************
	subroutine fill_t1dat_from_t3(t1,t3,zi,ftype)
	! note that t1%sep,t1%xmin,t1%xmax,t1%nx should already be set
	! and t1%dat should be allocated
	!***********************************************************
	!--------------------------------------input
	type(table3), intent(in) :: t3
	integer, intent(in) :: zi,ftype
	!-----------------------------------internal
	integer :: a,ji,jilow,jihigh
	!integer :: j,i,jtemp,itemp,itot
	!------------------------------------changed
	type(table1) :: t1
	!-------------------------------------------

	if( t1%sep.eq.0)then
	stop'problem in fill_t1dat_from_t3 (2a)'
	elseif(t1%nx.eq.0)then
	stop'problem in fill_t1dat_from_t3 (2b)'
	elseif(nint((t1%xmax-t1%xmin)/t1%sep)+1.ne.t1%nx)then
	stop'problem in fill_t1dat_from_t3 (2c)'
	endif

	if(t1%sep.ne.t3%sep1)stop'problem in fill_t1dat_from_t3 (2d)'

	if(ftype.lt.lbound(t3%dat,dim=3))stop'problem in fill_t1dat_from_t3 (2a)'
	if(ftype.gt.ubound(t3%dat,dim=3))stop'problem in fill_t1dat_from_t3 (2b)'

	if(zi.lt.lbound(t3%dat,dim=2))stop'problem in fill_t1dat_from_t3 (3a)'
	if(zi.gt.ubound(t3%dat,dim=2))stop'problem in fill_t1dat_from_t3 (3b)'

	if(ubound(t1%dat,dim=1).ne.t1%nx)stop'problem in fill_t1dat_from_t3 (5a)'

	select case(t3%type_of_assoc_table)
	case(1)
	if(t1%xmin.lt.t3%xmin1)stop'problem in fill_t1dat_from_t3 (4a)'
	if(t1%xmax.gt.t3%xmax1)stop'problem in fill_t1dat_from_t3 (4b)'


	! at the moment, want t1%xmin, t1%xmax to correspond to points in t3
	! can edit this later if needed
	if(abs((t1%xmin-t3%xmin1)/t3%sep1-dble(nint((t1%xmin-t3%xmin1)/t3%sep1))).gt.1.0D-3)then
	stop'problem in fill_t1dat_from_t3 (6a)'
	endif
	if(abs((t1%xmax-t3%xmax1)/t3%sep1-dble(nint((t1%xmax-t3%xmax1)/t3%sep1))).gt.1.0D-3)then
	stop'problem in fill_t1dat_from_t3 (6b)'
	endif
	case(2)
	if(t1%xmin.lt.t3%xmin2)stop'problem in fill_t1dat_from_t3 (5a)'
	if(t1%xmax.gt.t3%xmax2)stop'problem in fill_t1dat_from_t3 (5b)'

	if(abs((t1%xmin-t3%xmin2)/t3%sep2-dble(nint((t1%xmin-t3%xmin2)/t3%sep2))).gt.1.0D-3)then
	stop'problem in fill_t1dat_from_t3 (5c)'
	endif
	if(abs((t1%xmax-t3%xmax2)/t3%sep2-dble(nint((t1%xmax-t3%xmax2)/t3%sep2))).gt.1.0D-3)then
	stop'problem in fill_t1dat_from_t3 (5d)'
	endif
	case default
	stop'problem in fill_t1dat_from_t3 (1a)'
	end select


	t1%dat = -1.0D0

	select case(t3%type_of_assoc_table)
	case(1)

	a=0

	!t3%nx2=1 for t3%type_of_assoc_table=1
	jilow =nint((t1%xmin-t3%xmin1)/t3%sep1)+1
	jihigh=nint((t1%xmax-t3%xmin1)/t3%sep1)+1

	do ji=jilow,jihigh
	a=a+1
	t1%dat(a,1)=t3%dat(ji,zi,ftype)
	enddo

	if(a.ne.ubound(t1%dat,dim=1))stop'problem in fill_t1dat_from_t3 (10)'

	case(2)
	!This would need extra arguments to the function, since one
	!of the masses would need to be kept constant
	stop'problem in subroutine fill_t1dat_from_t3'
	case default
	stop'problem in fill_t1dat_from_t3 (1)'
	end select

	end subroutine fill_t1dat_from_t3
	!***********************************************************
	subroutine fill_slices_t2_from_slices_of_t3(t3,zi_selection,ftype_selection,slices_t2)
	! if this subroutine is used,
	! don't forget to deallocate slices_t2(x)%dat at some point
	!***********************************************************
	implicit none
	!--------------------------------------input
	type(table3), intent(in) :: t3
	type(table2), intent(out) :: slices_t2(:)
	integer, intent(in) :: zi_selection(:)
	integer, intent(in) :: ftype_selection(:)
	!-----------------------------------internal
	integer :: i,j,k,x,ji
	integer :: itot
	!-------------------------------------------

	if(lbound(zi_selection,dim=1).ne.lbound(slices_t2,dim=1))then
	stop'problem in fill_slices_t2_from_slices_of_t3 1a'
	endif
	if(ubound(zi_selection,dim=1).ne.ubound(slices_t2,dim=1))then
	stop'problem in fill_slices_t2_from_slices_of_t3 1b'
	endif

	do x=lbound(ftype_selection,dim=1),ubound(ftype_selection,dim=1)
	if(ftype_selection(x).lt.lbound(t3%dat,dim=3))stop'problem in fill_slices_t2_from_slices_of_t3 3a'
	if(ftype_selection(x).gt.ubound(t3%dat,dim=3))stop'problem in fill_slices_t2_from_slices_of_t3 3b'
	enddo

	do x=lbound(slices_t2,dim=1),ubound(slices_t2,dim=1)

	if(zi_selection(x).lt.lbound(t3%dat,dim=2))stop'problem in fill_slices_t2_from_slices_of_t3 4a'
	if(zi_selection(x).gt.ubound(t3%dat,dim=2))stop'problem in fill_slices_t2_from_slices_of_t3 4b'


	slices_t2(x)%id = t3%id
	slices_t2(x)%nx1 = t3%nx1
	slices_t2(x)%nx2 = t3%nx2
	slices_t2(x)%xmax1 = t3%xmax1
	slices_t2(x)%xmax2 = t3%xmax2
	slices_t2(x)%xmin1 = t3%xmin1
	slices_t2(x)%xmin2 = t3%xmin2
	slices_t2(x)%sep1 = t3%sep1
	slices_t2(x)%sep2 = t3%sep2
	slices_t2(x)%deltax = t3%deltax

	slices_t2(x)%z = t3%zmin + dble(zi_selection(x)-1)*t3%zsep

	slices_t2(x)%needs_M2_gt_2M1 = t3%needs_M2_gt_2M1

	allocate( slices_t2(x)%dat(slices_t2(x)%nx2,slices_t2(x)%nx1, &
	& lbound(ftype_selection,dim=1):ubound(ftype_selection,dim=1)))
	slices_t2(x)%dat = -1.0D0

	ji=0
	do j=1,slices_t2(x)%nx2

	select case(t3%type_of_assoc_table)
	case(2)!how general is this?
	itot=int(dble(j)*dble(t3%nx1)/dble(t3%nx2))
	case(0,1)
	itot=t3%nx1
	case default
	stop'problem in fill_slices_t2_from_slices_of_t3 5'
	end select

	do i=1,itot
	ji=ji+1
	do k=lbound(ftype_selection,dim=1),ubound(ftype_selection,dim=1)
	slices_t2(x)%dat(j,i,k)=t3%dat(ji,zi_selection(x),ftype_selection(k))
	enddo
	enddo
	enddo

	if(ji.ne.size(t3%dat,dim=1))stop'problem in fill_slices_t2_from_slices_of_t3 6'

	enddo

	end subroutine fill_slices_t2_from_slices_of_t3
	!***********************************************************
	subroutine readclsbfiles_binary
	!***********************************************************
	implicit none
	integer :: z
	integer :: n_xy_combinations

	do z=lbound(clsb_t3,dim=1),ubound(clsb_t3,dim=1)

	n_xy_combinations=clsb_t3(z)%nx2*(clsb_t3(z)%nx1+int(clsb_t3(z)%nx1/clsb_t3(z)%nx2))/2

	allocate(clsb_t3(z)%dat(n_xy_combinations,clsb_t3(z)%nz,size_of_third_dim_of_dat))

	foldername='csboutput_trans_binary/csboutput_outfile_fullclsb_ee_'//trim(adjustl(filename(z)))
	open(file_id_3,file = trim(adjustl(pathtofolder)) // &
	& trim(adjustl(foldername))//'.binary',form='unformatted')

	read(file_id_3)clsb_t3(z)%dat

	close(file_id_3)
	write(,)'finished reading in ',trim(filename(z))
	enddo

	end subroutine readclsbfiles_binary
	!***********************************************************
	subroutine writeclsbfiles_binary
	!***********************************************************
	implicit none
	integer :: z

	do z=lbound(clsb_t3,dim=1),ubound(clsb_t3,dim=1)

	foldername='csboutput_trans_binary/csboutput_outfile_fullclsb_ee_'//trim(adjustl(filename(z)))
	open(file_id_3,file = trim(adjustl(pathtofolder)) // &
	& trim(adjustl(foldername))//'.binary',form='unformatted')

	write(file_id_3)clsb_t3(z)%dat

	close(file_id_3)
	enddo

	end subroutine writeclsbfiles_binary
	!***********************************************************
	subroutine readclsbfiles(clsb_t3_id)
	!***********************************************************
	use usefulbits, only : vsmall
	implicit none
	!--------------------------------------input
	integer,intent(in) :: clsb_t3_id
	!-----------------------------------internal
	double precision :: Mh2_in, Mh1_in, log10sf_in, clsb_in, chisq_in,Mspecial_in,M0_in
	double precision :: Mhinfilename_initial,Mhinfilename_xmin
	integer :: i,a,n_xy_combinations,b,c
	integer :: n,j,x,n_csbfile,y,jmax,ymax
	integer, allocatable :: imax(:)
	integer :: Mhbeg,Mhend
	character(len=7) :: Mhstringpart1
	character(len=2) :: Mhstringpart2
	character(len=3) :: Mhbegstring,Mhendstring
	character(len=1) :: Mhdigit
	integer :: z
	!------------------------------------------

	n=0
	do x=lbound(clsb_t3,dim=1),ubound(clsb_t3,dim=1)
	if(clsb_t3(x)%id.eq.clsb_t3_id)then
	n=n+1
	z=x
	endif
	enddo

	if(n.ne.1)then
	write(,)'n=',n
	stop'problem in readclsbfiles 1'
	endif

	a=0 !a labels the number of data points in entire table (spread over many files)
	b=0 !b labels the number of (x,y) points i.e. will be compared to n_xy_combinations

	n_xy_combinations=clsb_t3(z)%nx2*(clsb_t3(z)%nx1+int(clsb_t3(z)%nx1/clsb_t3(z)%nx2))/2

	allocate(clsb_t3(z)%dat(n_xy_combinations,clsb_t3(z)%nz,size_of_third_dim_of_dat))

	#ifdef oldformat
	foldername='csboutput_trans/csboutput_outfile_fullclsb_ee_'//trim(adjustl(filename(z)))
	#else
	foldername='csboutput_trans_withMexclM0/csboutput_outfile_fullclsb_ee_'//trim(adjustl(filename(z)))
	#endif

	! n.b. this is not (clsb_t3(z)%xmax2-clsb_t3(z)%xmin2)/deltaMhinfilename
	! because of the file format: the first file is shorter than would be the case if the above expression
	! was correct

	if(abs(deltaMhinfilename-nint(deltaMhinfilename)).gt.vsmall)stop'deltaMhinfilename must be approx an integer'

	select case(clsb_t3(z)%type_of_assoc_table)
	case(1)
	ymax=nint((clsb_t3(z)%xmax1)/deltaMhinfilename)
	Mhinfilename_xmin=clsb_t3(z)%xmin1
	jmax=1
	case(2)
	ymax=nint((clsb_t3(z)%xmax2)/deltaMhinfilename)
	Mhinfilename_xmin=clsb_t3(z)%xmin2
	jmax=nint(deltaMhinfilename/dble(deltaMhinfilenamebits)/clsb_t3(z)%sep2)
	case default
	stop'error in subroutine readclsbfiles'
	end select

	allocate(imax(jmax))

	do y=1,ymax
	do x=1,deltaMhinfilenamebits

	Mhinfilename_initial=Mhinfilename_xmin + dble(y-1)deltaMhinfilename + dble(x-1)deltaMhinfilename/dble(deltaMhinfilenamebits)

	select case(clsb_t3(z)%type_of_assoc_table)
	case(1)
	imax=nint(deltaMhinfilename/dble(deltaMhinfilenamebits)/clsb_t3(z)%sep1)
	case(2)
	do j=1,jmax
	imax(j)=int((Mhinfilename_initial+clsb_t3(z)%sep2(j-1))(clsb_t3(z)%xmax1/clsb_t3(z)%xmax2)/clsb_t3(z)%sep2)
	enddo
	case default
	stop'error in subroutine readclsbfiles'
	end select

	Mhbeg= ( int( (Mhinfilename_initial)/deltaMhinfilename ) )*nint(deltaMhinfilename)
	Mhend= Mhbeg+10

	write(Mhbegstring,'(I3)')Mhbeg
	write(Mhendstring,'(I3)')Mhend

	select case(Mhbeg)
	case(0:9)
	Mhbegstring='00'//adjustl(Mhbegstring)
	case(10:99)
	Mhbegstring='0'//adjustl(Mhbegstring)
	case default
	end select

	select case(Mhend)
	case(0:9)
	Mhendstring='00'//adjustl(Mhendstring)
	case(10:99)
	Mhendstring='0'//adjustl(Mhendstring)
	case default
	end select

	Mhstringpart1=Mhbegstring//'_'//Mhendstring
	!write(,)'~'//Mhstringpart1//'~'

	if(x.gt.9)stop'have not done this case yet'
	write(Mhdigit,'(I1)')x
	Mhstringpart2='_'//Mhdigit

	open(file_id_3,file = trim(adjustl(pathtofolder)) // &
	& trim(adjustl(foldername))//'_loopmh'//Mhstringpart1//Mhstringpart2//'.txt')

	c=0 ! c labels the number of lines read in from a single file

	do n=1,skip
	read(file_id_3,*)
	enddo

	n_csbfile=skip
	do j=1,jmax

	#ifdef checktables
	do i= 1, imax(j)
	do n=1,clsb_t3(z)%nz
	n_csbfile=n_csbfile+1
	enddo
	enddo
	#endif

	do i=1,imax(j)
	b=b+1
	do n=1,clsb_t3(z)%nz
	c=c+1
	a=a+1

	#ifdef oldformat
	read(file_id_3,*)Mh2_in, Mh1_in, log10sf_in, clsb_in, chisq_in
	#else
	read(file_id_3,*)Mh2_in, Mh1_in, log10sf_in, clsb_in, chisq_in, Mspecial_in, M0_in
	#endif

	#ifdef checktables
	!check Mh1_in,Mh2_in are as expected
	select case(clsb_t3(z)%type_of_assoc_table)
	case(1)
	if(abs(Mh1_in-( Mhinfilename_initial + dble(i-1)*clsb_t3(z)%sep1)) .gt.0.0001D0 )stop'error: Mh1_in'
	if(abs(Mh2_in-(clsb_t3(z)%xmin2 + dble(j-1)*clsb_t3(z)%sep2)) .gt.0.0001D0 ) stop'error: Mh2_in'
	case(2)
	if(abs(Mh1_in-(clsb_t3(z)%xmin1 + dble(i-1)*clsb_t3(z)%sep1)) .gt.vsmall ) stop'error: Mh1_in'
	if(abs(Mh2_in-( Mhinfilename_initial + dble(j-1)*clsb_t3(z)%sep2)) .gt.0.0001D0 )stop'error: Mh2_in'
	case default
	stop'error in subroutine readclsbfiles'
	end select

	!check log10sf_in is as expected
	if( abs(log10sf_in-(clsb_t3(z)%zmin+clsb_t3(z)%zsep*dble(n-1))) .gt.0.0001D0 )stop'error: log10sf_in'
	#endif

	clsb_t3(z)%dat(b,n,clsb_t3_dat_3rdcol_clsb )=clsb_in
	clsb_t3(z)%dat(b,n,clsb_t3_dat_3rdcol_chisq )=chisq_in


	#ifndef oldformat
	clsb_t3(z)%dat(b,n,clsb_t3_dat_3rdcol_Mspecial )=Mspecial_in
	clsb_t3(z)%dat(b,n,clsb_t3_dat_3rdcol_M0 )=M0_in
	#endif

	enddo
	enddo
	enddo

	close(file_id_3)

	#ifdef checktables
	if((n_csbfile-skip).ne.c)then
	write(,)'n_csbfile,skip=',n_csbfile,skip
	write(,)'c=',c
	stop'error: n_csbfile,skip'
	endif
	#endif
	enddo
	enddo

	deallocate(imax)

	#ifdef checktables
	if(abs(clsb_t3(z)%xmax2-Mh2_in).gt.vsmall)stop'error in clsb_t3(z)%xmax2'
	if(abs(clsb_t3(z)%xmax1-Mh1_in).gt.vsmall)then
	write(,)'hello clsb_t3(z)%xmax1,Mh1_in',clsb_t3(z)%xmax1,Mh1_in
	stop'error in clsb_t3(z)%xmax1'
	endif
	if(abs(clsb_t3(z)%zmax-log10sf_in).gt.0.001)stop'error in clsb_t3(z)%zmax'
	if((n_xy_combinations).ne.b)stop'error in n_xy_combinations'
	if((n_xy_combinationsclsb_t3(z)%nz).ne.a)stop'error in n_xy_combinationsclsb_t3(z)%nz'
	#endif

	write(,)'finished reading in ',trim(filename(z))
	call flush(6)

	end subroutine readclsbfiles
	!***********************************************************
	function clsb_t3elementnumber_from_S95table(ttype,id)
	implicit none
	integer,intent(in) :: ttype,id
	integer :: z,n
	integer :: clsb_t3elementnumber_from_S95table

	if(.not.(allocated(clsb_t3)))stop'error in function clsb_t3elementnumber_from_S95table'

	clsb_t3elementnumber_from_S95table=-1

	n=0
	do z=lbound(clsb_t3,dim=1),ubound(clsb_t3,dim=1)
	if((clsb_t3(z)%type_of_assoc_table.eq.ttype).and. &
	& (clsb_t3(z)%id_of_assoc_table .eq.id ))then
	n=n+1
	clsb_t3elementnumber_from_S95table=z
	endif
	enddo

	if(n.gt.1)stop'error in function clsb_t3elementnumber_from_S95table'

	end function clsb_t3elementnumber_from_S95table
	!***********************************************************
	function gett3dat(intable,t3, Mi,Mj,log10sf,selec)
	implicit none
	type(table3), intent(in) :: t3
	double precision, intent(in) :: Mj,Mi,log10sf
	integer :: i,j,z,ji,jtemp,itemp,selec,itot
	logical, intent(out):: intable
	double precision :: ibit,jbit,zbit
	double precision :: gett3dat

	intable=.True.

	i=nint( (Mi-t3%xmin1) /t3%sep1)+1
	j=nint( (Mj-t3%xmin2) /t3%sep2)+1
	z=nint((log10sf-t3%zmin )/t3%zsep)+1

	if(min(i,j,z).lt.1)then
	intable=.False.
	elseif(i.gt.t3%nx1)then
	intable=.False.
	elseif(j.gt.t3%nx2)then
	intable=.False.
	elseif(z.gt.t3%nz )then
	intable=.False.
	endif

	ibit=(Mi -(dble(i-1)*t3%sep1+t3%xmin1))/t3%sep1
	jbit=(Mj -(dble(j-1)*t3%sep2+t3%xmin2))/t3%sep2
	zbit=(log10sf-(dble(z-1)*t3%zsep+t3%zmin ))/t3%zsep

	if(max(ibit,jbit,zbit).gt.0.01D0)then ! Mj,Mi,log10sf are not on a data point
	stop'bad input to function gett3dat'
	endif

	ji=0
	do jtemp=1,j
	if(jtemp.eq.j)then
	itot=i
	else
	select case(t3%type_of_assoc_table)
	case(2)!how general is this?
	itot=int(dble(jtemp)*dble(t3%nx1)/dble(t3%nx2))
	case(0,1)
	itot=t3%nx1
	case default
	stop'problem in function gett3dat'
	end select
	endif

	do itemp=1,itot
	ji=ji+1
	enddo
	enddo

	if(intable)then
	gett3dat=t3%dat(ji,z,selec)
	else
	gett3dat=-1.0D0
	endif

	end function gett3dat

	end module S95tables_type3
	!****************************************************************** _

File Metadata

Mime Type: text/plain
Expires: Wed, May 14, 11:25 AM (14 h, 34 m)
Storage Engine: blob
Storage Format: Raw Data
Storage Handle: 5072144
Default Alt Text: S95tables_type3.F90 (26 KB)

S95tables_type3.F90No OneTemporaryActions

S95tables_type3.F90View Options

File Metadata

Event Timeline

S95tables_type3.F90
No OneTemporary
Actions

S95tables_type3.F90
View Options