Page MenuHomeHEPForge
Files F10664350

No OneTemporary
Actions

View Options

This file is larger than 256 KB, so syntax highlighting was skipped.
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/src/nnlo_common.h
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/src/nnlo_common.h (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/src/nnlo_common.h (revision 1772)
@@ -0,0 +1,266 @@
+// is -*- c++ -*-
+//
+// @file nnlo_common.h
+// nnlo common block interface
+//
+//
+// Copyright (C) 2015 M.Sutton (sutt@cern.ch)
+//
+// $Id: nnlo_common.h, v0.0 Thu 3 Sep 2015 09:51:20 CEST sutt $
+
+#ifndef NNLO_COMMON_H
+#define NNLO_COMMON_H
+
+// #include <omp.h>
+
+// KR: Define maxscl equal to NNLOJET variable for array dimensioning below
+const int maxscl = 7;
+extern "C" int maxscl_hook;
+
+// KR: Use C++ macro constants like DBL_MIN instead
+// const double TINY = 1.e-100;
+
+typedef struct {
+ char sproc[11];
+} __process__ ;
+
+
+/// vegas iteration information
+typedef struct {
+ int itmax1;
+ int itmax2;
+ int nevents;
+} __runinfo__;
+
+
+typedef struct { int ieorder; } __order__;
+
+
+/// alpha_s
+typedef struct { double as; } __strong__;
+
+/// beam energy ????
+/// typedef struct { double Ebeam; } __Ebeam__;
+
+
+
+typedef struct {
+ int njets;
+ int nloop;// NOT IMPLEMENTED IN NNLOJET!
+ // int norder;
+} __inppar__ ;
+
+
+
+typedef struct {
+ int ndim;
+ int nv;
+ int norder;
+} __ndimcurrent__ ;
+
+
+typedef struct {
+ double amzZ;
+ double zewfac[4];
+ double zewnull[4];
+} __eweakz__ ;
+
+typedef struct {
+ double PDF;
+ double xi1;
+ double xi2;
+ double xjac;
+ double x1;
+ double x2;
+} __PDF__ ;
+
+
+/// standard x variables
+typedef struct {
+ double x1;
+ double x2;
+} __parfrac__ ;
+
+
+/// virtual correction x variables
+typedef struct {
+ double xreg1;
+ double xreg2;
+ bool virtsflag;
+} __xregions__ ;
+
+/// jacobian flag for virtual terms
+typedef struct {
+ bool jflag;
+} __jacobian__ ;
+
+typedef struct {
+ int igx;
+} __gridix__ ;
+
+
+/// scales
+// typedef struct {
+// double facscale[maxscl];
+// double rscale[maxscl];
+// } __scales__;
+
+
+/// index of which diagram is being
+/// processed ...
+typedef struct {
+ int iproc;
+} __currentprocess__;
+
+
+/// which two input parton species are
+/// related to process iproc
+typedef struct {
+ int ip1;
+ int ip2;
+} __idparton__;
+
+typedef struct {
+ int ip1;
+ int ip2;
+} __partid__;
+
+
+
+/// normalisation term
+typedef struct {
+ double rnormcurr;
+ double wgtcurr;
+} __histonorm__;
+
+
+typedef struct {
+ double gridwgt[maxscl];
+} __gridweights__ ;
+
+
+// common /channel/ip(1:2000),ipars(1:2000),iloops(1:2000)
+
+
+typedef struct {
+ int ip[2000];
+ int ipars[2000];
+ int iloops[2000];
+} __channel__ ;
+
+
+/// jacobian factor for colour sampler
+typedef struct {
+ double xcoljac;
+} __xcoljac__ ;
+
+/// jacobian flag for colour sampler
+typedef struct {
+ bool colflag;
+} __colourflag__ ;
+
+
+
+typedef struct {
+ int Nphase;
+} __nphase__ ;
+
+typedef struct {
+ int iphase;
+} __iphase__ ;
+
+
+
+typedef struct {
+ double wgt;
+ int iave;
+ int it;
+ double swgt;
+} __vegasiterweight__ ;
+
+typedef struct {
+ double roots;
+} __inputpar__ ;
+
+
+typedef struct {
+ char srunid[3];
+} __runid__;
+
+typedef struct {
+ char fname[128];
+} __outfile__;
+
+typedef struct {
+ char sjobname[64];
+} __jobname__;
+
+typedef struct {
+ char slogname[128];
+} __log__;
+
+
+extern "C" __runinfo__ runinfo_;
+extern "C" __order__ order_;
+// extern "C" __Ebeam__ ebeam_;
+
+extern "C" __inppar__ inppar_;
+
+extern "C" __strong__ strong_;
+// extern "C" __PDF__ pdf_;
+
+extern "C" __parfrac__ parfrac_;
+#pragma omp threadprivate(parfrac_)
+
+extern "C" __xregions__ xregions_;
+
+extern "C" __jacobian__ jacobian_;
+
+//extern "C" __scales__ scales_;
+//#pragma omp threadprivate(scales_)
+
+extern "C" double mur2_hook(const int& idx);
+extern "C" double muf2_hook(const int& idx);
+extern "C" int maxscl_hook; //!< maximum number of scale variations (set to 7 in NNLOJET 4708)
+extern "C" int iseed_hook; //!< seed
+extern "C" int obs_id_hook(const char obsname[]); //!< observable id
+extern "C" double obs_val_hook(const int& obsid); //!< observable value
+
+extern "C" __histonorm__ histonorm_;
+
+extern "C" __currentprocess__ currentprocess_;
+extern "C" __idparton__ idparton_;
+
+extern "C" __partid__ partid_;
+#pragma omp threadprivate(partid_)
+
+// extern "C" __gridweights__ gridweights_;
+
+extern "C" __ndimcurrent__ ndimcurrent_;
+extern "C" __eweakz__ eweakz_;
+
+
+extern "C" __gridix__ gridix_;
+
+extern "C" __channel__ channel_;
+
+extern "C" __process__ process_;
+
+extern "C" __colourflag__ colourflag_;
+
+extern "C" __xcoljac__ xcoljac_;
+
+/// access the rotated phasespace points
+/// for the real caching
+extern "C" __nphase__ nphase_;
+
+extern "C" __iphase__ iphase_;
+
+extern "C" __vegasiterweight__ vegasiterweight_;
+extern "C" __runid__ runid_;
+extern "C" __outfile__ outfile_;
+extern "C" __jobname__ jobname_;
+extern "C" __inputpar__ inputpar_;
+extern "C" __log__ log_;
+
+#endif // NNLO_COMMON_H
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/src/applgrid_utils.h
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/src/applgrid_utils.h (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/src/applgrid_utils.h (revision 1772)
@@ -0,0 +1,51 @@
+// emacs: this is -*- c++ -*-
+//
+// @file applgrid_utils.h
+//
+//
+//
+// Copyright (C) 2016 M.Sutton (sutt@cern.ch)
+//
+// $Id: applgrid_utils.h, v0.0 Mon 25 Apr 2016 15:03:30 CEST sutt $
+
+
+#ifndef APPLGRID_UTILS_H
+#define APPLGRID_UTILS_H
+
+#include "amconfig.h"
+
+#ifdef HAVE_APPL
+
+#include <vector>
+
+namespace nnlo {
+
+void init_applgrid( const int& id, const std::string& gridname,
+ const int nbins, const double* bins );
+
+void fill_applgrid( const int& id,
+ const double& x1, const double& x2, const double& Q2,
+ const double& obs,
+ const double* wt );
+
+void term_applgrid( const int& id, int nweights );
+
+void fill_ref_applgrid( const int& id, const double& obs, const double* wt );
+
+}
+
+#endif
+
+
+
+#endif // APPLGRID_UTILS_H
+
+
+
+
+
+
+
+
+
+
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/src/Makefile.am
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/src/Makefile.am (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/src/Makefile.am (revision 1772)
@@ -0,0 +1,66 @@
+##########################################################################
+#
+# File: Makefile.am
+#
+# Copyright (C) M.Sutton (sutt@cern.ch)
+#
+# Description: generate the Makefile for the nnlo - applgrid bridge
+#
+#
+# Created: M.Sutton (sutt@cern.ch) Fri 15 May 2015 00:05:29 GMT
+#
+# $Id: Makefile.am 20 2013-07-10 01:55:42Z sutt $
+#
+#########################################################################
+
+
+lib_LIBRARIES = libnnlo.a
+
+libnnlo_a_SOURCES = nnlo_interface.h nnlo_interface.cxx nnlo_utils.h nnlo_utils.cxx nnlo_common.h \
+ ascache.cxx \
+ fastnlo_utils.cxx fastnlo_utils.h \
+ applgrid_utils.cxx applgrid_utils.h
+
+
+library_includedir = $(includedir)/nnlo
+library_include_HEADERS = nnlo_utils.h nnlo_interface.h nnlo_common.h \
+ fastnlo_utils.h applgrid_utils.h \
+ phaseCache.h mapCache.h ascache.h \
+ imapCache.h fillCache.h vecCache.h
+
+AM_CXXFLAGS = -O2 -Wall -Wno-unknown-pragmas -fPIC -I. -I.. -I$(srcdir) -std=c++11
+AM_LDFLAGS =
+
+if USE_CERNROOT
+ AM_CXXFLAGS += $(ROOT_CFLAGS)
+ AM_LDFLAGS += $(ROOT_LDFLAGS) -O $(ROOT_LIBS) $(FCLIBS)
+endif
+
+if USE_APPLGRID
+ AM_CXXFLAGS += $(APPLGRID_CXXFLAGS)
+ AM_LDFLAGS += $(APPLGRID_LDFLAGS)
+endif
+
+if USE_FASTNLO
+ AM_CXXFLAGS += $(FASTNLO_CXXFLAGS)
+ AM_LDFLAGS += $(FASTNLO_LDFLAGS)
+endif
+
+
+#AM_CXXFLAGS = -O2 -Wall -fPIC -fopenmp -I. -I.. -I$(srcdir) $(ROOTCFLAGS) $(APPLCFLAGS) -I$(FASTNLOINCDIR)
+AM_CFLAGS = $(AM_CXXFLAGS)
+AM_CPPFLAGS = $(AM_CPPFLAGS)
+AM_FCFLAGS = -c
+AM_FCLIBS = -lg2c
+AM_SOFLAGS = -shared
+
+
+
+clean-local:
+ rm -rf *.o *.lo *Dict*
+
+.cxx.o :
+ $(CXX) $(AM_CXXFLAGS) -c $<
+
+.c.o :
+ $(CC) $(AM_CFLAGS) -c $<
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/src/phaseCache.h
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/src/phaseCache.h (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/src/phaseCache.h (revision 1772)
@@ -0,0 +1,135 @@
+// emacs: this is -*- c++ -*-
+//
+// @file phaseCache.h
+//
+//
+//
+// Copyright (C) 2016 M.Sutton (sutt@cern.ch)
+//
+// $Id: phaseCache.h, v0.0 Thu 14 Jul 2016 13:21:43 CEST sutt $
+
+
+#ifndef PHASECACHE_H
+#define PHASECACHE_H
+
+#include <iostream>
+#include <vector>
+#include <map>
+
+
+
+struct phaseCache {
+
+public:
+
+ phaseCache( int nproc ) :
+ mx1(0), mx2(0), mQ2(0),
+ mnv(0), mix(0),
+ mx1r(0), mx2r(0),
+ morder(0),
+ mweight(nproc,0),
+ mfilled(false)
+ { }
+
+ virtual ~phaseCache() { }
+
+
+ const std::vector<double>& weights() const { return mweight; };
+
+ double& at(int i) { return mweight[i]; }
+ double at(int i) const { return mweight[i]; }
+
+ size_t size() const { return mweight.size(); }
+ void clear() { mweight = std::vector<double>(size(),0); }
+
+
+ bool changed( double obs,
+ int order, double x1, double x2, double Q2,
+ int nv,
+ int ix=0, double _x1=0, double _x2=0 ) {
+
+ bool bupdate = false;
+
+ if ( mobs!=obs ) bupdate = true;
+
+ if ( mx1!=x1 || mx2!=x2 || mQ2!=Q2 || morder!=order ) bupdate = true;
+
+ // if ( bupdate ) std::cout << "update: 1 " << (mx1!=x1) << " " << (mx2!=x2) << " " << (mQ2!=Q2) << " " << (morder!=order) << std::endl;
+
+ if ( nv!=mnv ) bupdate = true;
+
+ // if ( bupdate ) std::cout << "update: 2 " << (nv!=mnv) << std::endl;
+
+ if ( nv>0 ) {
+ if ( ix!=mix || _x1!=mx1r || _x2!=mx2r ) bupdate = true;
+
+ // if ( bupdate ) std::cout << "update: 3 " << (ix!=mix) << " " << (_x1!=mx1r) << " " << (_x2!=mx2r) << std::endl;
+ }
+
+ return bupdate;
+
+ }
+
+
+ void update( double obs, int order, double x1, double x2, double Q2,
+ int nv,
+ int ix=0, double _x1=0, double _x2=0 ) {
+
+ mfilled = true;
+
+ mx1 = x1;
+ mx2 = x2;
+ mQ2 = Q2;
+
+ mnv = nv;
+ mix = ix;
+
+ mx1r = _x1;
+ mx2r = _x2;
+
+ morder = order;
+
+ mobs = obs;
+
+ clear();
+ }
+
+ bool filled() const { return mfilled; }
+
+
+public:
+
+ double mx1, mx2, mQ2;
+
+ int mnv;
+ int mix;
+ double mx1r, mx2r;
+
+ double morder;
+
+ double mobs;
+
+ std::vector<double> mweight;
+
+ // std::vector<double> mobs;
+
+ bool mfilled;
+
+};
+
+inline std::ostream& operator<<( std::ostream& s, const phaseCache& _p ) {
+ return s;
+}
+
+
+#endif // PHASECACHE_H
+
+
+
+
+
+
+
+
+
+
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/src/fillCache.cxx
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/src/fillCache.cxx (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/src/fillCache.cxx (revision 1772)
@@ -0,0 +1,19 @@
+//
+// @file fillCache.cxx
+//
+//
+// @author M.Sutton
+//
+// Copyright (C) 2016 M.Sutton (sutt@cern.ch)
+//
+// $Id: fillCache.cxx, v0.0 Wed 24 Aug 2016 12:18:21 CEST sutt $
+
+
+
+#include "fillCache.h"
+
+
+
+
+
+
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/src/nnlo_utils.h
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/src/nnlo_utils.h (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/src/nnlo_utils.h (revision 1772)
@@ -0,0 +1,92 @@
+// emacs: this is -*- c++ -*-
+//
+// @file nnlo_utils.h
+//
+//
+// @author M.Sutton
+//
+// Copyright (C) 2013 M.Sutton (sutt@cern.ch)
+//
+// $Id: nnlo_utils.h, v0.0 Tue 13 Aug 2013 12:20:03 CEST sutt $
+
+#ifndef NNLOJET_UTILS_H
+#define NNLOJET_UTILS_H
+
+#include <string>
+#include <vector>
+
+#include "nnlo_common.h"
+#include <algorithm>
+
+#ifdef HAVE_APPL
+#include "TH1D.h"
+#endif
+
+//#include <utility>
+
+
+namespace nnlo {
+
+ std::string banner();
+
+ /// simple test if a file exists
+ bool file_exists(const std::string& s);
+
+#ifdef HAVE_APPL
+ void Normalise(TH1D* h);
+#endif
+
+ /// Some kinematical definitions
+ double rapidity(double E, double pz);
+ double pt(double px, double py);
+ double mass(double E, double px, double py, double pz);
+
+ std::string date();
+
+ int getorder( int iproc );
+
+ //! getters for useful quantities
+ //! which are not directly accessible in the common blocks
+ void GetFillWeights(double& wgt, double& x1, double& x2, int is); //!< get weight and x-values as needed by fastNLO & APPLgrid
+
+ int GetOrder(); //!< Get order of current event 0: LO, 1: NLO, 2 NNLO
+
+ inline std::string GetProcessName() {
+ std::string process(process_.sproc);
+ process.erase(std::remove(process.begin(), process.end(), ' '),process.end());
+ // KR: Prefer to differentiate between "1jet" and "2jet"
+ // if ( process == "1jet" || process == "2jet" ) process = "jet";
+ return process;
+ }; //!< get the process name from NNLOJET
+ inline bool IsDIS() {static bool bIsDIS = (nnlo::GetProcessName() == "DIS"); return bIsDIS;};
+ // inline bool IsPPJ() {static bool bIsPPJ = (nnlo::GetProcessName() == "jet"); return bIsPPJ;};
+ inline bool IsPPJ() {static bool bIsPPJ = (nnlo::GetProcessName() == "1jet" || nnlo::GetProcessName() == "2jet"); return bIsPPJ;};
+
+ int GetPowLO();
+
+ int GetNLegs();
+
+ inline int GetNPow() { return GetPowLO() + GetOrder();
+ // else return inppar_.njets+GetOrder();
+ // if ( nnlo::IsDIS() ) return inppar_.njets+GetOrder()-1 ;
+ // else return inppar_.njets+GetOrder();
+ } ; //!< Get power of alpha_s for current contributions
+
+
+
+}
+
+
+template<typename T>
+std::ostream& operator<<( std::ostream& s, const std::vector<T>& v ) {
+ for ( size_t i=0 ; i<v.size() ; i++ ) s << "\t" << v[i];
+ return s;
+}
+
+template<typename T>
+std::ostream& operator<<( std::ostream& s, const std::vector<T*>& v ) {
+ for ( size_t i=0 ; i<v.size() ; i++ ) s << "\t" << *v[i];
+ return s;
+}
+
+#endif /// NNLOJET_UTILS_H
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/src/fastnlo_utils.h
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/src/fastnlo_utils.h (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/src/fastnlo_utils.h (revision 1772)
@@ -0,0 +1,117 @@
+// emacs: this is -*- c++ -*-
+//
+// @file fastnlo_utils.h
+//
+// $Id: fastnlo_utils.h, v0.0 Mon 25 Apr 2016 15:03:24 CEST sutt $
+
+
+#ifndef FASTNLO_UTILS_H
+#define FASTNLO_UTILS_H
+
+#ifdef HAVE_FASTNLO
+
+#include "amconfig.h"
+
+#include "fastnlotk/fastNLOCreate.h"
+
+namespace nnlo {
+
+ void init_fastnlo( const int& id, const std::string& gridname, const int& nbins, const double* bins );
+
+ void fill_fastnlo( const int& id, const double& obs, const double* wt, const double* wtref );
+
+ void term_fastnlo( const int& id, int nweights );
+
+ void fill_ref_fastnlo( const int& id, const double& obs, const double* wt );
+
+}
+
+namespace fnloUtils {
+
+ //
+ // --- global helper functions for NNLOJET interface
+ //
+ fastNLO::GeneratorConstants GetNNLOJET_GenConsts();
+ fastNLO::ProcessConstants GetNNLOJET_ProcConstsPP();
+ fastNLO::ProcessConstants GetNNLOJET_ProcConstsDIS();
+ fastNLO::ScenarioConstants GetNNLOJET_ScenConsts(const int& id);
+ void InitFastNLO(const int& id, const double* wt);
+ //std::string GetProcessName();
+ //inline bool IsDIS() {static bool bIsDIS = (GetProcessName() == "DIS"); return bIsDIS;};
+ std::string GetOrderName(std::set<std::pair<int,int> >* nlne = NULL );
+ //int GetOrder();
+ std::string GetContribName(int nloops=-1, int ne = -1);
+ std::string GetConfigFile();
+ std::vector<std::string> GetConfigFiles();
+ std::string GetConfigDir();
+ int GetSeed();
+ int GetMaxscl();
+ void RememberContribution();
+ double CalculateReferenceWeight(double w, double x1, double x2);
+ std::vector<double> SclIndepWgt(const double* w, double muf, double mur);
+ void SetNNLOJETDefaultBinning(fastNLO::ScenarioConstants& sc, const int& nbins, const double& lo);
+ double KahanSum( double in[], unsigned int insize );
+ double OrderedSum( double in[], unsigned int insize );
+ template <typename T>
+ std::vector<std::vector<std::pair<T,T> > > VectorToPairs(const std::vector<std::vector<T> >& v) {
+ //!< convert a vector of vectors to a vector of pairs
+ std::vector<std::vector<std::pair<T,T> > > out(v.size());
+ for ( unsigned int ip = 0 ;ip<v.size() ; ip++ ) {
+ //if ( v[ip].size()%2 == 1 ) std::cout<<"[fnloUtils::VectorToPairs] ERROR! even number of integers required!"<<std::endl;
+ // for ( unsigned int p = 0; p<v[ip].size() ; p+=2 ) {
+ if ( v[ip].size()%2 == 0 ) std::cout<<"[fnloUtils::VectorToPairs] ERROR! Odd number of integers required (because first values is just a counter)!"<<std::endl;
+ for ( unsigned int p = 1; p<v[ip].size() ; p+=2 ) {
+ out[ip].push_back(std::make_pair(v[ip][p],v[ip][p+1]));
+ }
+ }
+ return out;
+ }
+
+ // class to handle the sub processes
+ class fnloSuprocesses : public std::vector<int> {
+ public:
+ fnloSuprocesses(const std::string& config) ; //!< constructor reading config file with subprocesses
+ fnloSuprocesses(){} ; //!< default constructor (don't call ist)
+ void ReadConfigFile(const std::string& config) ; //!< read config file
+ void ReadConfigFiles(const vector<std::string>& config) { for ( const auto& i : config ) ReadConfigFile(i);} ; //!< read config file
+ std::vector<std::vector<int > > GetPartonCombinations() const; //!< get parton combinations (fUniqueValues)
+ const std::vector<std::vector<int > >& GetInitialValues() const { return fInitialValues;}
+ const std::vector<std::vector<int > >& GetUniqueValues() const { return fUniqueValues;}
+ const std::string& GetConfigFile() const {return fConfigFile;}
+ private:
+ std::vector<std::vector<int > > fInitialValues;
+ std::vector<std::vector<int > > fUniqueValues;
+ std::string fConfigFile;
+ bool CompareVectors(const std::vector<int>& v1, const std::vector<int>& v2 ) const;
+ void SetUniqueValues();
+ };
+
+ // class to remember the 'init' varialbes
+ struct fnloInit {
+ int id;
+ std::string gridname;
+ int nbins;
+ const double* lo;
+ };
+
+ //
+ // --- global variables
+ //
+ static std::vector < fastNLOCreate* > ftable;
+ static std::vector < bool > fIsInclJet;
+ static std::vector < bool > fIs820GeV;
+ static std::vector < bool > fIs137;
+ static std::vector < std::string > ftablename;
+ static std::vector < fnloInit > fInits;
+ static fnloUtils::fnloSuprocesses sp;
+ static std::set<std::pair<int,int> > fNlNe; //!< keep track of what we have calculated
+ static std::set<int > fIDs; //!< keep track of what we have calculated
+
+ // Moved to only cxx file where this is used
+ // static double _myfillwgt = 0;
+
+}
+
+#endif
+
+#endif // FASTNLO_UTILS_H
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/src/nnlo_interface.h
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/src/nnlo_interface.h (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/src/nnlo_interface.h (revision 1772)
@@ -0,0 +1,32 @@
+// emacs: this is -*- c++ -*-
+//
+// @file nnlo_interface.h
+//
+//
+//
+// Copyright (C) 2015 M.Sutton (sutt@cern.ch)
+//
+// $Id: nnlo_interface.h, v0.0 Mon 25th May 2015 10:25:18 CEST sutt $
+
+#ifndef NNLOJET_INTERFACE_H
+#define NNLOJET_INTERFACE_H
+
+namespace nnlo {
+
+ double _myFillWgt;
+
+ void init( const int& igrid,
+ const int& id, const std::string& gridname,
+ const int& nbins, const double* bins );
+
+ void fill( const int& igrid,
+ const int& id, const double& obs, const double* wt, const double* wtref );
+
+ void term( const int& igrid,
+ const int& id );
+
+}
+
+extern "C" bool setup_nnlo_();
+
+#endif // NNLOJET_INTERFACE_H
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/src/ascache.h
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/src/ascache.h (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/src/ascache.h (revision 1772)
@@ -0,0 +1,17 @@
+// emacs: this is -*- c++ -*-
+//
+// @file ascache.h
+//
+// cache of 2pi/alphas factors by order
+//
+// Copyright (C) 2016 M.Sutton (sutt@cern.ch)
+//
+// $Id: ascache_.h, v0.0 Tue 8 Nov 2016 11:15:29 CET sutt $
+
+
+#ifndef ASCACHE_H
+#define ASCACHE_H
+
+double ascache( const double Q2, const int order );
+
+#endif // ASCACHE_H
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/src/Makefile.in
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/src/Makefile.in (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/src/Makefile.in (revision 1772)
@@ -0,0 +1,749 @@
+# Makefile.in generated by automake 1.15 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2014 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+##########################################################################
+#
+# File: Makefile.am
+#
+# Copyright (C) M.Sutton (sutt@cern.ch)
+#
+# Description: generate the Makefile for the nnlo - applgrid bridge
+#
+#
+# Created: M.Sutton (sutt@cern.ch) Fri 15 May 2015 00:05:29 GMT
+#
+# $Id: Makefile.am 20 2013-07-10 01:55:42Z sutt $
+#
+#########################################################################
+
+
+VPATH = @srcdir@
+am__is_gnu_make = { \
+ if test -z '$(MAKELEVEL)'; then \
+ false; \
+ elif test -n '$(MAKE_HOST)'; then \
+ true; \
+ elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+ true; \
+ else \
+ false; \
+ fi; \
+}
+am__make_running_with_option = \
+ case $${target_option-} in \
+ ?) ;; \
+ *) echo "am__make_running_with_option: internal error: invalid" \
+ "target option '$${target_option-}' specified" >&2; \
+ exit 1;; \
+ esac; \
+ has_opt=no; \
+ sane_makeflags=$$MAKEFLAGS; \
+ if $(am__is_gnu_make); then \
+ sane_makeflags=$$MFLAGS; \
+ else \
+ case $$MAKEFLAGS in \
+ *\\[\ \ ]*) \
+ bs=\\; \
+ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
+ esac; \
+ fi; \
+ skip_next=no; \
+ strip_trailopt () \
+ { \
+ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+ }; \
+ for flg in $$sane_makeflags; do \
+ test $$skip_next = yes && { skip_next=no; continue; }; \
+ case $$flg in \
+ *=*|--*) continue;; \
+ -*I) strip_trailopt 'I'; skip_next=yes;; \
+ -*I?*) strip_trailopt 'I';; \
+ -*O) strip_trailopt 'O'; skip_next=yes;; \
+ -*O?*) strip_trailopt 'O';; \
+ -*l) strip_trailopt 'l'; skip_next=yes;; \
+ -*l?*) strip_trailopt 'l';; \
+ -[dEDm]) skip_next=yes;; \
+ -[JT]) skip_next=yes;; \
+ esac; \
+ case $$flg in \
+ *$$target_option*) has_opt=yes; break;; \
+ esac; \
+ done; \
+ test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+@USE_CERNROOT_TRUE@am__append_1 = $(ROOT_CFLAGS)
+@USE_CERNROOT_TRUE@am__append_2 = $(ROOT_LDFLAGS) -O $(ROOT_LIBS) $(FCLIBS)
+@USE_APPLGRID_TRUE@am__append_3 = $(APPLGRID_CXXFLAGS)
+@USE_APPLGRID_TRUE@am__append_4 = $(APPLGRID_LDFLAGS)
+@USE_FASTNLO_TRUE@am__append_5 = $(FASTNLO_CXXFLAGS)
+@USE_FASTNLO_TRUE@am__append_6 = $(FASTNLO_LDFLAGS)
+subdir = src
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(library_include_HEADERS) \
+ $(am__DIST_COMMON)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/amconfig.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+ *) f=$$p;; \
+ esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+ for p in $$list; do echo "$$p $$p"; done | \
+ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+ if (++n[$$2] == $(am__install_max)) \
+ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+ END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+ test -z "$$files" \
+ || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+ || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+ $(am__cd) "$$dir" && rm -f $$files; }; \
+ }
+am__installdirs = "$(DESTDIR)$(libdir)" \
+ "$(DESTDIR)$(library_includedir)"
+LIBRARIES = $(lib_LIBRARIES)
+ARFLAGS = cru
+AM_V_AR = $(am__v_AR_@AM_V@)
+am__v_AR_ = $(am__v_AR_@AM_DEFAULT_V@)
+am__v_AR_0 = @echo " AR " $@;
+am__v_AR_1 =
+libnnlo_a_AR = $(AR) $(ARFLAGS)
+libnnlo_a_LIBADD =
+am_libnnlo_a_OBJECTS = nnlo_interface.$(OBJEXT) nnlo_utils.$(OBJEXT) \
+ ascache.$(OBJEXT) fastnlo_utils.$(OBJEXT) \
+ applgrid_utils.$(OBJEXT)
+libnnlo_a_OBJECTS = $(am_libnnlo_a_OBJECTS)
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo " GEN " $@;
+am__v_GEN_1 =
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 =
+DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)
+depcomp = $(SHELL) $(top_srcdir)/depcomp
+am__depfiles_maybe = depfiles
+am__mv = mv -f
+CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
+ $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
+AM_V_lt = $(am__v_lt_@AM_V@)
+am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
+am__v_lt_0 = --silent
+am__v_lt_1 =
+LTCXXCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CXX $(AM_LIBTOOLFLAGS) \
+ $(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) \
+ $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
+ $(AM_CXXFLAGS) $(CXXFLAGS)
+AM_V_CXX = $(am__v_CXX_@AM_V@)
+am__v_CXX_ = $(am__v_CXX_@AM_DEFAULT_V@)
+am__v_CXX_0 = @echo " CXX " $@;
+am__v_CXX_1 =
+CXXLD = $(CXX)
+CXXLINK = $(LIBTOOL) $(AM_V_lt) --tag=CXX $(AM_LIBTOOLFLAGS) \
+ $(LIBTOOLFLAGS) --mode=link $(CXXLD) $(AM_CXXFLAGS) \
+ $(CXXFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
+AM_V_CXXLD = $(am__v_CXXLD_@AM_V@)
+am__v_CXXLD_ = $(am__v_CXXLD_@AM_DEFAULT_V@)
+am__v_CXXLD_0 = @echo " CXXLD " $@;
+am__v_CXXLD_1 =
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+ $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \
+ $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
+ $(AM_CFLAGS) $(CFLAGS)
+AM_V_CC = $(am__v_CC_@AM_V@)
+am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
+am__v_CC_0 = @echo " CC " $@;
+am__v_CC_1 =
+CCLD = $(CC)
+LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+ $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+ $(AM_LDFLAGS) $(LDFLAGS) -o $@
+AM_V_CCLD = $(am__v_CCLD_@AM_V@)
+am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
+am__v_CCLD_0 = @echo " CCLD " $@;
+am__v_CCLD_1 =
+SOURCES = $(libnnlo_a_SOURCES)
+DIST_SOURCES = $(libnnlo_a_SOURCES)
+am__can_run_installinfo = \
+ case $$AM_UPDATE_INFO_DIR in \
+ n|no|NO) false;; \
+ *) (install-info --version) >/dev/null 2>&1;; \
+ esac
+HEADERS = $(library_include_HEADERS)
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates. Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+ BEGIN { nonempty = 0; } \
+ { items[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique. This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+ list='$(am__tagged_files)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | $(am__uniquify_input)`
+ETAGS = etags
+CTAGS = ctags
+am__DIST_COMMON = $(srcdir)/Makefile.in $(top_srcdir)/depcomp
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+APPLGRID_CXXFLAGS = @APPLGRID_CXXFLAGS@
+APPLGRID_LDFLAGS = @APPLGRID_LDFLAGS@
+APPLPATH = @APPLPATH@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CERNROOT_LDFLAGS = @CERNROOT_LDFLAGS@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+CXXDEPMODE = @CXXDEPMODE@
+CXXFLAGS = @CXXFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+FASTNLOPATH = @FASTNLOPATH@
+FASTNLO_CXXFLAGS = @FASTNLO_CXXFLAGS@
+FASTNLO_LDFLAGS = @FASTNLO_LDFLAGS@
+FGREP = @FGREP@
+GREP = @GREP@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
+MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
+MKDIR_P = @MKDIR_P@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+RANLIB = @RANLIB@
+ROOTPATH = @ROOTPATH@
+ROOT_CFLAGS = @ROOT_CFLAGS@
+ROOT_LDFLAGS = @ROOT_LDFLAGS@
+ROOT_LIBS = @ROOT_LIBS@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+VERSION = @VERSION@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_CXX = @ac_ct_CXX@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+lib_LIBRARIES = libnnlo.a
+libnnlo_a_SOURCES = nnlo_interface.h nnlo_interface.cxx nnlo_utils.h nnlo_utils.cxx nnlo_common.h \
+ ascache.cxx \
+ fastnlo_utils.cxx fastnlo_utils.h \
+ applgrid_utils.cxx applgrid_utils.h
+
+library_includedir = $(includedir)/nnlo
+library_include_HEADERS = nnlo_utils.h nnlo_interface.h nnlo_common.h \
+ fastnlo_utils.h applgrid_utils.h \
+ phaseCache.h mapCache.h ascache.h \
+ imapCache.h fillCache.h vecCache.h
+
+AM_CXXFLAGS = -O2 -Wall -Wno-unknown-pragmas -fPIC -I. -I.. \
+ -I$(srcdir) -std=c++11 $(am__append_1) $(am__append_3) \
+ $(am__append_5)
+AM_LDFLAGS = $(am__append_2) $(am__append_4) $(am__append_6)
+
+#AM_CXXFLAGS = -O2 -Wall -fPIC -fopenmp -I. -I.. -I$(srcdir) $(ROOTCFLAGS) $(APPLCFLAGS) -I$(FASTNLOINCDIR)
+AM_CFLAGS = $(AM_CXXFLAGS)
+AM_CPPFLAGS = $(AM_CPPFLAGS)
+AM_FCFLAGS = -c
+AM_FCLIBS = -lg2c
+AM_SOFLAGS = -shared
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .c .cxx .lo .o .obj
+$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+ && { if test -f $@; then exit 0; else break; fi; }; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu src/Makefile'; \
+ $(am__cd) $(top_srcdir) && \
+ $(AUTOMAKE) --gnu src/Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+install-libLIBRARIES: $(lib_LIBRARIES)
+ @$(NORMAL_INSTALL)
+ @list='$(lib_LIBRARIES)'; test -n "$(libdir)" || list=; \
+ list2=; for p in $$list; do \
+ if test -f $$p; then \
+ list2="$$list2 $$p"; \
+ else :; fi; \
+ done; \
+ test -z "$$list2" || { \
+ echo " $(MKDIR_P) '$(DESTDIR)$(libdir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(libdir)" || exit 1; \
+ echo " $(INSTALL_DATA) $$list2 '$(DESTDIR)$(libdir)'"; \
+ $(INSTALL_DATA) $$list2 "$(DESTDIR)$(libdir)" || exit $$?; }
+ @$(POST_INSTALL)
+ @list='$(lib_LIBRARIES)'; test -n "$(libdir)" || list=; \
+ for p in $$list; do \
+ if test -f $$p; then \
+ $(am__strip_dir) \
+ echo " ( cd '$(DESTDIR)$(libdir)' && $(RANLIB) $$f )"; \
+ ( cd "$(DESTDIR)$(libdir)" && $(RANLIB) $$f ) || exit $$?; \
+ else :; fi; \
+ done
+
+uninstall-libLIBRARIES:
+ @$(NORMAL_UNINSTALL)
+ @list='$(lib_LIBRARIES)'; test -n "$(libdir)" || list=; \
+ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+ dir='$(DESTDIR)$(libdir)'; $(am__uninstall_files_from_dir)
+
+clean-libLIBRARIES:
+ -test -z "$(lib_LIBRARIES)" || rm -f $(lib_LIBRARIES)
+
+libnnlo.a: $(libnnlo_a_OBJECTS) $(libnnlo_a_DEPENDENCIES) $(EXTRA_libnnlo_a_DEPENDENCIES)
+ $(AM_V_at)-rm -f libnnlo.a
+ $(AM_V_AR)$(libnnlo_a_AR) libnnlo.a $(libnnlo_a_OBJECTS) $(libnnlo_a_LIBADD)
+ $(AM_V_at)$(RANLIB) libnnlo.a
+
+mostlyclean-compile:
+ -rm -f *.$(OBJEXT)
+
+distclean-compile:
+ -rm -f *.tab.c
+
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/applgrid_utils.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ascache.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/fastnlo_utils.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/nnlo_interface.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/nnlo_utils.Po@am__quote@
+
+.cxx.obj:
+@am__fastdepCXX_TRUE@ $(AM_V_CXX)$(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+@am__fastdepCXX_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@ $(AM_V_CXX)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
+
+.cxx.lo:
+@am__fastdepCXX_TRUE@ $(AM_V_CXX)$(LTCXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCXX_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@ $(AM_V_CXX)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(LTCXXCOMPILE) -c -o $@ $<
+
+mostlyclean-libtool:
+ -rm -f *.lo
+
+clean-libtool:
+ -rm -rf .libs _libs
+install-library_includeHEADERS: $(library_include_HEADERS)
+ @$(NORMAL_INSTALL)
+ @list='$(library_include_HEADERS)'; test -n "$(library_includedir)" || list=; \
+ if test -n "$$list"; then \
+ echo " $(MKDIR_P) '$(DESTDIR)$(library_includedir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(library_includedir)" || exit 1; \
+ fi; \
+ for p in $$list; do \
+ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+ echo "$$d$$p"; \
+ done | $(am__base_list) | \
+ while read files; do \
+ echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(library_includedir)'"; \
+ $(INSTALL_HEADER) $$files "$(DESTDIR)$(library_includedir)" || exit $$?; \
+ done
+
+uninstall-library_includeHEADERS:
+ @$(NORMAL_UNINSTALL)
+ @list='$(library_include_HEADERS)'; test -n "$(library_includedir)" || list=; \
+ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+ dir='$(DESTDIR)$(library_includedir)'; $(am__uninstall_files_from_dir)
+
+ID: $(am__tagged_files)
+ $(am__define_uniq_tagged_files); mkid -fID $$unique
+tags: tags-am
+TAGS: tags
+
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+ set x; \
+ here=`pwd`; \
+ $(am__define_uniq_tagged_files); \
+ shift; \
+ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ if test $$# -gt 0; then \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ "$$@" $$unique; \
+ else \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$unique; \
+ fi; \
+ fi
+ctags: ctags-am
+
+CTAGS: ctags
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+ $(am__define_uniq_tagged_files); \
+ test -z "$(CTAGS_ARGS)$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && $(am__cd) $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) "$$here"
+cscopelist: cscopelist-am
+
+cscopelist-am: $(am__tagged_files)
+ list='$(am__tagged_files)'; \
+ case "$(srcdir)" in \
+ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+ *) sdir=$(subdir)/$(srcdir) ;; \
+ esac; \
+ for i in $$list; do \
+ if test -f "$$i"; then \
+ echo "$(subdir)/$$i"; \
+ else \
+ echo "$$sdir/$$i"; \
+ fi; \
+ done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ list='$(DISTFILES)'; \
+ dist_files=`for file in $$list; do echo $$file; done | \
+ sed -e "s|^$$srcdirstrip/||;t" \
+ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+ case $$dist_files in \
+ */*) $(MKDIR_P) `echo "$$dist_files" | \
+ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+ sort -u` ;; \
+ esac; \
+ for file in $$dist_files; do \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ if test -d $$d/$$file; then \
+ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test -d "$(distdir)/$$file"; then \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+ else \
+ test -f "$(distdir)/$$file" \
+ || cp -p $$d/$$file "$(distdir)/$$file" \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+check: check-am
+all-am: Makefile $(LIBRARIES) $(HEADERS)
+installdirs:
+ for dir in "$(DESTDIR)$(libdir)" "$(DESTDIR)$(library_includedir)"; do \
+ test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+ done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+ if test -z '$(STRIP)'; then \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ install; \
+ else \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+ fi
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-libLIBRARIES clean-libtool clean-local \
+ mostlyclean-am
+
+distclean: distclean-am
+ -rm -rf ./$(DEPDIR)
+ -rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+ distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am: install-library_includeHEADERS
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am: install-libLIBRARIES
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+ -rm -rf ./$(DEPDIR)
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic \
+ mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-libLIBRARIES uninstall-library_includeHEADERS
+
+.MAKE: install-am install-strip
+
+.PHONY: CTAGS GTAGS TAGS all all-am check check-am clean clean-generic \
+ clean-libLIBRARIES clean-libtool clean-local cscopelist-am \
+ ctags ctags-am distclean distclean-compile distclean-generic \
+ distclean-libtool distclean-tags distdir dvi dvi-am html \
+ html-am info info-am install install-am install-data \
+ install-data-am install-dvi install-dvi-am install-exec \
+ install-exec-am install-html install-html-am install-info \
+ install-info-am install-libLIBRARIES \
+ install-library_includeHEADERS install-man install-pdf \
+ install-pdf-am install-ps install-ps-am install-strip \
+ installcheck installcheck-am installdirs maintainer-clean \
+ maintainer-clean-generic mostlyclean mostlyclean-compile \
+ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
+ tags tags-am uninstall uninstall-am uninstall-libLIBRARIES \
+ uninstall-library_includeHEADERS
+
+.PRECIOUS: Makefile
+
+
+clean-local:
+ rm -rf *.o *.lo *Dict*
+
+.cxx.o :
+ $(CXX) $(AM_CXXFLAGS) -c $<
+
+.c.o :
+ $(CC) $(AM_CFLAGS) -c $<
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/src/applgrid_utils.cxx
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/src/applgrid_utils.cxx (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/src/applgrid_utils.cxx (revision 1772)
@@ -0,0 +1,727 @@
+//
+// @file applgrid_utils.cxx
+//
+//
+// @author M.Sutton
+//
+// Copyright (C) 2016 M.Sutton (sutt@cern.ch)
+//
+// $Id: applgrid_utils.cxx, v0.0 Mon 25 Apr 2016 15:03:34 CEST sutt $
+
+#include "amconfig.h"
+
+#ifdef HAVE_APPL
+
+#include <iostream>
+#include <cstdlib>
+#include <set>
+
+#include "appl_grid/appl_grid.h"
+#include "appl_grid/appl_pdf.h"
+#include "appl_grid/lumi_pdf.h"
+#include "appl_grid/appl_timer.h"
+
+
+#include "nnlo_common.h"
+#include "nnlo_utils.h"
+
+
+#include "applgrid_utils.h"
+#include "phaseCache.h"
+
+#include "mapCache.h"
+
+
+#include "fillCache.h"
+
+#include "ascache.h"
+
+
+
+// extern "C" void evolvepdf_(const double& x, const double& Q, double* xf);
+// extern "C" double alphaspdf_(const double& Q);
+
+
+extern bool first_run;
+
+//static std::int _gridname; // = "nnlojet.root";
+static std::vector<appl::grid*> _grids;
+static std::map<int, appl::grid*> _gridmap;
+static std::map<int, std::string> _gridnames;
+
+typedef mapCache cache_t;
+
+// #include "vecCache.h"
+
+// typedef vecCache cache_t;
+
+static std::map<appl::grid*, cache_t*> _cachemap;
+
+static bool usecache = true;
+
+extern "C" bool getunitphase_();
+//bool getunitphase_() {return false;}; // DB: temporary fix
+
+extern "C" int currentcacheid_();
+
+bool dbg = false;
+
+
+fillCache<cache_t> fc;
+
+
+struct timeval atimer;
+
+namespace nnlo {
+void fill_appl_internal( appl::grid* _grid,
+ const int& order,
+ const double& x1, const double& x2, const double& Q2,
+ const double& obs, int iproc, const double* wgt );
+
+void fillcache( appl::grid* grid,
+ int nproc, double obs, int order, int iprocess,
+ double x1, double x2, double Q2,
+ double fullweight );
+
+}
+
+
+
+std::string clean( std::string s, const std::string& regex ) {
+ size_t p=s.find(regex);
+ while ( p!=std::string::npos ) {
+ s.erase( p, regex.size() );
+ p=s.find(regex);
+ }
+ return s;
+}
+
+
+std::string tolower( const std::string& s ) {
+ std::string s1 = s;
+ for ( size_t i=0 ; i<s.size() ; i++ ) {
+ if ( char(s1[i])>='A' && char(s1[i])<='Z' ) s1[i] -= 'A'-'a';
+ }
+ return s1;
+}
+
+
+
+std::string findname( const int& id ) {
+ std::map<int, std::string>::iterator gitr = _gridnames.find(id);
+ if ( gitr!=_gridnames.end() ) return gitr->second;
+ return "";
+}
+
+
+appl::grid* find( const int& id ) {
+ std::map<int, appl::grid*>::iterator gitr = _gridmap.find(id);
+ if ( gitr!=_gridmap.end() ) return gitr->second;
+ std::cerr << "find() requested grid id " << id << " not found" << std::endl;
+ exit(2);
+ return 0;
+}
+
+/// cache related items
+
+int intproc = 0;
+
+/// maybe move the cache into the grid itself
+
+cache_t* findcache( appl::grid* gptr, int nproc=0 ) {
+ std::map<appl::grid*, cache_t*>::iterator itr = _cachemap.find(gptr);
+ if ( itr!=_cachemap.end() ) return itr->second;
+
+ if ( nproc>0 ) {
+ std::pair< std::map<appl::grid*, cache_t*>::iterator, bool > status = _cachemap.insert( std::map<appl::grid*, cache_t*>::value_type( gptr, new cache_t( nproc ) ) );
+ return status.first->second;
+ }
+
+ return 0;
+}
+
+
+/// if we move the caching into the grid itself, it might tidy
+/// the code somewhat
+
+void nnlo::fillcache( appl::grid* grid,
+ int nproc, double obs, int order, int iprocess,
+ double x1, double x2, double Q2,
+ double fullweight ) {
+
+
+ cache_t* mpc = findcache( grid, nproc );
+
+ /// have the kinematics changed ?
+
+ bool mupdate = mpc->changed( obs, order, x1, x2, Q2 );
+
+ if ( dbg ) std::cout << "cache " << intproc << "\t " << iprocess << "\tmupdate: " << mupdate << "\tobs " << obs
+ << "\tkin " << x1 << " " << x2 << " " << Q2 << "\twgt " << fullweight;// << std::endl;
+
+ /// if they have then flush the buffer and update the grid
+
+ static int mcached = 0;
+
+ // std::cout << "\tiprocess " << iprocess << "\tupdate: " << mupdate << "\tobs " << obs
+ // << "\t(" << x1 << " " << x2 << " " << Q2 << ")\twgt " << fullweight << std::endl;
+
+ if ( mupdate ) {
+
+ // if ( dbg ) std::cout << "\tiprocess " << iprocess << "\tupdate: " << mupdate << "\tobs " << obs << std::endl;
+
+ if ( mpc->filled() ){
+
+ if ( dbg ) std::cout << "\tflushing: mpc ";
+ // if ( dbg )
+ if ( dbg ) std::cout << "cache size " << mpc->size() << std::endl;
+
+ cache_t::const_iterator itr = mpc->begin();
+ cache_t::const_iterator iend = mpc->end();
+ while( itr!=iend ) {
+ if ( (int)itr->second.size()==mpc->mnproc ) {
+ if ( dbg ) std::cout << "ix" << "\tflushing obs " << itr->first << std::endl;
+ // std::cout << "\tflushing vector size " << itr->second.size()
+ // << "\tx " << mpc->mx1 << " " << mpc->mx2 << " " << mpc->mQ2 << "\tobs" << itr->first << "\tw[0] " << itr->second[0] << "\torder " << mpc->morder << std::endl;
+ if ( first_run ) grid->fill_phasespace( mpc->mx1, mpc->mx2, mpc->mQ2, itr->first, &itr->second[0], mpc->morder );
+ else grid->fill_grid( mpc->mx1, mpc->mx2, mpc->mQ2, itr->first, &itr->second[0], mpc->morder );
+ }
+ itr++;
+ }
+
+ }
+
+ /// now update the cache kinematics and zero
+ /// the cache
+ mpc->update( obs, order, x1, x2, Q2 );
+
+ mcached = 0;
+
+ }
+
+ if ( dbg ) std::cout << std::endl;
+
+ /// update the cache with the new values
+
+ std::vector<double>& mwgt = mpc->weights( obs );
+
+ mwgt.at( iprocess ) += fullweight;
+
+ mcached++;
+
+ if ( dbg ) std::cout << "fill: " << mpc->weights( obs ) << std::endl;
+
+}
+
+
+
+
+
+
+void nnlo::init_applgrid( const int& id, const std::string& gridname_,
+ const int nbins, const double* bins ) {
+
+ double lo = bins[0];
+ double hi = bins[nbins+1];
+
+ // From NNLOJETS common?
+ int leading_order = inppar_.njets;
+ int nloops = 2;
+
+ /// find out which process we are after ...
+
+ std::string process = clean( process_.sproc, " " );
+
+ std::cout << "process:" << process << ":" << std::endl;
+
+
+ // Book APPLGRID
+
+ std::cout << "### nnlo::init_applgrid(): Book APPLGRID ..." << std::endl;
+ std::cout << "\tid: " << id << "\n";
+ std::cout << "\tfile: " << gridname_ << "\ttime " << date() << "\tversion " << appl::version() << "\tcompiled " << appl::compiled();
+
+ std::string gridname = tolower(process);
+ gridname += "-";
+ gridname += gridname_;
+
+ size_t applpos = gridname.find(".appl");
+ if ( applpos!=std::string::npos ) gridname.replace( applpos, 5, "-appl" );
+
+ if ( gridname.find(".root")==std::string::npos ) gridname += ".root";
+
+ if ( gridname!=gridname_ ) std::cout << "\t->\t" << gridname << "\n";
+
+ std::cout << " \tnjets: " << inppar_.njets << " " << "\tndim: " << ndimcurrent_.nv << std::endl;
+
+ /// don't want to use the multiple threads
+ /// during the filling
+ appl::grid::disable_threads(true);
+
+ // If file exists, APPLGRID warmup done already
+ if ( file_exists( gridname ) ) {
+
+ std::cout << "################### File exists ..." << std::endl;
+
+ // Open the existing grid
+
+ // std::cout << "nnlo::init() ready " << _ready << std::endl;
+ std::cout << "nnlo::init_applgrid() reading grid " << gridname << " ..." << std::endl;
+
+ appl::grid* _grid = new appl::grid( gridname );
+
+ _gridnames.insert( std::map<int, std::string>::value_type( id, gridname ) );
+ _gridmap.insert( std::map<int, appl::grid*>::value_type( id, _grid ) );
+
+ // _grid->optimise( true, 2 );
+ _grid->optimise( true );
+
+ first_run = false;
+
+ _grid->setGeneratedPDF( "NNPDF30_nnlo_as_0118" );
+ _grid->setGeneratediPDF( 0 );
+
+ std::cout << *_grid << std::endl;
+
+ } else {
+
+ std::cout << "nnlo::init_applgrid() creating grid: " << gridname << " ..." << std::endl;
+
+ /// Create a new grid - these should be set from some values
+ /// from the NNLOJET code
+
+ /// eta bins from eta0_a_gg5g0q_i1_n1_z2_q1_r001
+
+ /// need to allow setting these from the fortran ???
+
+ // int Nobs = nbins;
+ // double obsmin = bins[0];
+ // double obsmax = bins[nbins+1]; //don't change this anymore !!!!!
+
+ std::cout << "booking grid: " << id << "\tnbins " << nbins << "\trange " << lo << " - " << hi << std::endl;
+
+ int NQ2 = 10;
+ double Q2min = 10;
+ double Q2max = 4*14000*14000;
+ double Q2order = 4;
+
+ int Nx = 30;
+ double xmin = 0.00001;
+ double xmax = 0.9999999;
+ double xorder = 5;
+
+ // int leading_order = inppar_.njets;
+ // int nloops = inppar_.nloop;
+
+ char* _configdir = getenv( "CONFIGDIR" );
+
+ if ( _configdir == 0 ) {
+ std::cerr << "configdir could not be found" << std::endl;
+ std::exit(-1);
+ }
+
+ std::string configdir = _configdir;
+
+ std::cout << "configdir: " << configdir << std::endl;
+
+ if ( process=="1jet" || process=="2jet" ) process= "jet";
+
+ configdir += "/" + process + "/";
+
+ setenv( "PDFPATH", configdir.c_str(), 1 );
+
+ std::string genpdf = process+"-LO.config:"+process+"-NLO.config:"+process+"-NNLO.config";
+
+ /// set whether to use the cache or not
+
+ // char* usecachevar = getenv( "USECACHE" );
+ // if ( usecachevar ) usecache = true; //// argh!!!
+
+ std::cout << "creating grid " << genpdf << std::endl;
+
+ // lumi_pdf lumi( genpdf );
+ // lumi.write_latex( std::cout );
+
+ // double apramval=5.;
+ // appl::grid::transformvar(apramval);
+
+ int nigrids = 0;
+
+ if ( nloops == 0 ) nigrids = 0;
+ if ( nloops == 1 ) nigrids = 1;
+ if ( nloops == 2 ) nigrids = 2;
+
+ appl::grid* _grid = new appl::grid( nbins, bins,
+ NQ2, Q2min, Q2max, Q2order,
+ Nx, xmin, xmax, xorder,
+ genpdf, leading_order, nigrids );
+
+ // Use the reweighting function
+ _grid->reweight(true);
+
+ // Add documentation
+ _grid->addDocumentation( banner() );
+
+ _gridnames.insert( std::map<int, std::string>::value_type( id, gridname ) );
+ _gridmap.insert( std::map<int, appl::grid*>::value_type( id, _grid ) );
+
+ }
+
+}
+
+
+
+void nnlo::fill_applgrid( const int& id,
+ const double& x1, const double& x2, const double& Q2,
+ const double& obs,
+ const double* wt )
+{
+
+ if ( dbg ) std::cout << "nnlo::fill_applgrid " << id
+ << "\tx1 " << x1 << "\tx2 " << x2 << "\tQ2 " << Q2
+ << "\tobs " << obs << std::endl;
+
+ appl::grid* _grid = find( id );
+
+ if ( _grid ) {
+
+ // nv :
+ // V, VR, VV = 2 otherwise 0
+ //
+ // channels:
+ // channel_.iloops(iproc);
+ // VV = 2, VR V = 1 otherwise =0
+ // iloops + norder - njets
+
+ int iproc = currentprocess_.iproc;
+
+ intproc = iproc; /// save for lazy debug reasons in the cache filling
+
+
+ int iorder = getorder( iproc );
+
+ // iorder = 0;
+
+ if ( dbg ) std::cout << "iorder lookup " << iorder << std::endl;
+
+ // std::cout << __LINE__ << " iorder " << iorder << std::endl;
+
+ /// if we move all this stuff to a class, then we only need to
+ /// retrieve the lumi_pdf once ...
+
+ const lumi_pdf* pdf = dynamic_cast<const lumi_pdf*>( ( (const appl::grid*)_grid)->genpdf(iorder) );
+
+ if ( dbg ) std::cout << __LINE__ << " pdf " << pdf << std::endl;
+ // if ( dbg ) std::cout << "pdf " << *pdf << std::endl;
+
+ /// use common/partid/ rather than common/idparton/ ??
+ // int ip1 = partid_.ip1;
+ // int ip2 = partid_.ip2;
+ // std::cout << "nnlo::fill() pdf " << pdf << "\tpartons " << ip1 << " " << ip2 << std::endl;
+
+ int iprocess = pdf->decideSubProcess( iproc );
+
+#if 1
+ static int icount = 0;
+ if ( getunitphase_() ) {
+ if ( icount%100000==0 ) std::cout << "nnlo::fill_applgrid() fill phase space only: count " << icount << std::endl;
+ icount++;
+ }
+ else {
+ if ( icount%100000==0 ) std::cout << "nnlo::fill_applgrid() full run fill: count " << icount << std::endl;
+ icount++;
+ }
+#endif
+
+#if 0
+ if ( iprocess<=0 ) {
+ char* corder = getenv ( "PHASEORDER" );
+ if ( corder ) {
+ phasespaceonly = true;
+ iorder = std::atoi( corder );
+ iproc = 1;
+ }
+ }
+#endif
+
+ // std::cout << "nnlo::fill() iproc " << iproc << " " << iprocess << std::endl;
+
+
+ if ( iprocess<0 ) {
+
+ std::cerr << "iprocess " << iprocess << "\tiproc " << iproc << "\tiorder " << iorder << " <<<<<" << std::endl;
+
+ std::cout << *pdf << std::endl;
+
+ std::exit(0);
+ }
+
+
+
+ static bool trimgrid = true;
+
+
+ if ( trimgrid ) {
+
+ if ( dbg ) std::cout << "trimming unused orders " << std::endl;
+
+ atimer = appl_timer_start();
+
+ // if ( mpc == 0 ) mpc = new cache_t( pdf->size() );
+
+ for ( int iord=0 ; iord<=_grid->nloops() ; iord++ ) {
+ std::cout << "\tgrid size " << _grid->size()*1e-6 << " Mbytes";
+ if ( iord!=iorder ) {
+ std::cout << "\ttrimming order ";
+ _grid->trim(iord);
+ std::cout << " -> " << _grid->size()*1e-6 << " Mbytes" << std::endl;
+ }
+ else std::cout << std::endl;
+ }
+ trimgrid = false;
+ }
+
+ if ( iprocess!=-1 ) {
+
+ std::vector<double> wgt(pdf->size(), 0);
+
+ wgt[iprocess] = wt[0];
+
+ // std::vector<double> weights(7,0);
+
+ // for ( int j=7 ; j-- ; ) weights[1] = wt[j];
+
+ /// NB: now pass the weights in as a parameter ...
+ /// chose which os the maxscl=3 weights, you actuall
+ /// want to use
+ // weights[iprocess] = gridweights_.gridwgt[0];
+
+ // std::cout << "nnlo::fill() x1 " << x1 << "\tx2 " << x2 << "\tQ2 " << Q2 << std::endl;
+
+#if 0
+ std::cout << " Order: njets: " << inppar_.njets
+ << "\tg.nloops(): " << _grid->nloops()
+ << "\tiproc " << iproc
+ << "\tiorder " << iorder << "\tnv " << ndimcurrent_.nv
+ << "\tobs " << obs << "\tx: " << x1 << " " << x2 << "\tQ2 " << Q2 << "\twgt " << wt[0] << std::endl;
+#endif
+
+
+ // fill_appl_internal( _grid, iorder, x1, x2, Q2, obs, &weights[0] );
+ fill_appl_internal( _grid, iorder, x1, x2, Q2, obs, iprocess, &wgt[0] );
+
+ }
+
+ }
+
+}
+
+
+
+double gtime = 0;
+
+void nnlo::fill_appl_internal( appl::grid* _grid,
+ const int& order,
+ const double& x1, const double& x2, const double& Q2,
+ const double& obs,
+ int iprocess, const double* wgt ) {
+
+ if ( dbg ) std::cout << "nnlo::fill_applgrid_internal " << _grid << "\torder " << order << "\tx1 " << x1 << "\tx2 " << x2 << "\tQ2 " << Q2 << std::endl;
+
+ // static int Nsubproc = _grid->subProcesses( inppar_.nloop );
+
+ const lumi_pdf* pdf = dynamic_cast<const lumi_pdf*>(((const appl::grid*)_grid)->genpdf( order ) );
+
+ std::vector<double> weight(pdf->size(),0);
+
+ if ( dbg ) std::cout << "nnlo::fill_appl_internal() subproc size " << pdf->size() << " " << weight.size() << std::endl;
+
+ /// get the factor of 2pi/alphas for this order from the cache
+ double asfactor = ascache( Q2, order );
+
+ int nv = ndimcurrent_.nv;
+
+ double jac = 1;
+
+ if (colourflag_.colflag) jac *= 1./xcoljac_.xcoljac;
+
+ struct timeval _atimer = appl_timer_start();
+
+
+ if ( nv==0 ) {
+
+ // tree level
+
+ // fillcache( _grid, pdf->size(), obs, order, iprocess, x1, x2, Q2, wgt[iprocess]*asfactor*jac );
+
+ if ( !getunitphase_() && usecache ) {
+ fillcache( _grid, pdf->size(), obs, order, iprocess, x1, x2, Q2, wgt[iprocess]*asfactor*jac );
+ }
+ else {
+ weight[iprocess] = wgt[iprocess]*asfactor*jac;
+
+ if ( first_run ) _grid->fill_phasespace( x1, x2, Q2, obs, &weight[0], order );
+ else _grid->fill_grid( x1, x2, Q2, obs, &weight[0], order );
+ }
+
+
+ }
+ else if ( nv==1 ) {
+
+
+
+ }
+ else if ( nv==2 ) {
+
+ /// virtual term
+
+ if ( dbg ) std::cout << "nnlo::fill_appl_internal() fill vitual term " << nv << std::endl;
+
+ /// FIXME: move all these calculation of x1, x2 etc in to the
+ /// calling function, to calculate once and for all for appl and fnlo,
+ /// and then pass in the "scaled" x1 and x2 vales
+
+ int ix = gridix_.igx; /// get this from our new, added common block
+
+ double _x1 = x1;
+ double _x2 = x2;
+
+ if ( ix==2 ) _x2 = x2/xregions_.xreg2;
+ else if ( ix==3 ) _x1 = x1/xregions_.xreg1;
+ else if ( ix==4 ) {
+ _x1 = x1/xregions_.xreg1;
+ _x2 = x2/xregions_.xreg2;
+ }
+
+ // double jac = 1;
+
+ if ( jacobian_.jflag ) jac *= 1/((1-x1)*(1-x2)); /// *not* 1/((1-_x1)(1-_x2))
+
+ if ( ix==2 ) jac *= 1./xregions_.xreg2;
+ else if ( ix==3 ) jac *= 1./xregions_.xreg1;
+ else if ( ix==4 ) jac *= 1./(xregions_.xreg1*xregions_.xreg2);
+
+
+ if ( !getunitphase_() && usecache ) {
+ fillcache( _grid, pdf->size(), obs, order, iprocess, _x1, _x2, Q2, wgt[iprocess]*asfactor*jac );
+ }
+ else {
+ weight[iprocess] = wgt[iprocess]*asfactor*jac;
+
+ if ( first_run ) _grid->fill_phasespace( _x1, _x2, Q2, obs, &weight[0], order );
+ else _grid->fill_grid( _x1, _x2, Q2, obs, &weight[0], order );
+ }
+
+ }
+
+ gtime += appl_timer_stop( _atimer );
+
+
+}
+
+
+
+void nnlo::fill_ref_applgrid( const int& id, const double& obs, const double* wt ) {
+ appl::grid* _grid = find( id );
+ if ( _grid ) _grid->getReference()->Fill( obs, wt[0] );
+}
+
+
+
+
+
+
+
+
+void nnlo::term_applgrid( const int& id, int nweights ) {
+
+ double atime = appl_timer_stop( atimer );
+
+
+ // Write APPLGRID
+
+ static int icount = 0;
+
+ std::cout << "### nnlo::term(): Write APPLGRID id " << id << "\tcalled " << icount << " times \ttime " << atime << " ms" << std::endl;
+ std::cout << "\ttime: " << date() << std::endl;
+
+ icount++;
+
+ std::cout << "global fill time: " << gtime << " ms" << std::endl;
+
+ appl::grid* _grid = find( id );
+
+ if ( _grid==0 ) return;
+
+ /// flush cached weights to grid
+
+ // std::cout << "\tflushing: mpc " << std::endl;
+
+ /// get the cache correpsonding to this grid
+
+ if ( !getunitphase_() && usecache ) {
+
+ cache_t* mpc = findcache( _grid );
+
+ cache_t::const_iterator itr = mpc->begin();
+ cache_t::const_iterator iend = mpc->end();
+
+ while( itr!=iend ) {
+ // std::cout << "\tflushing obs " << itr->first << std::endl;
+ if ( (int)itr->second.size()==mpc->mnproc ) {
+ // std::cout << "\tflushing vector size " << itr->second.size()
+ // << "\tx " << mpc->mx1 << " " << mpc->mx2 << " " << mpc->mQ2 << "\tobs" << itr->first << "\tw[0] " << itr->second[0] << "\torder " << mpc->morder << std::endl;
+ if ( first_run ) _grid->fill_phasespace( mpc->mx1, mpc->mx2, mpc->mQ2, itr->first, &itr->second[0], mpc->morder );
+ else _grid->fill_grid( mpc->mx1, mpc->mx2, mpc->mQ2, itr->first, &itr->second[0], mpc->morder );
+ }
+ itr++;
+ }
+ }
+
+ std::string gridname = findname( id );
+
+ if ( gridname=="" ) return;
+
+ /// keep track of which grids we've already called
+ /// termination on
+ static std::set<int> term_id;
+ if ( term_id.find(id)!=term_id.end() ) {
+ std::cout << "\t term() already called for grid " << gridname << " " << id << std::endl;
+ return;
+ }
+ term_id.insert( id );
+
+ /// we need to scale by the bin width ???
+
+ // double nweights = icount;
+
+ /// _grids.back()->getReference()->Scale(1/(conv*binwidth[nh]/nweights));
+
+ _grid->run() = nweights;
+
+ /// hmmm, we divide by the bin width after the convolution
+ /// if the weights are *already* divided by the bin width, we will
+ /// need to scale *up* the weights in each bin by the bin width
+ /// as a hack ( for fixed binning ) do that here ...
+
+ // TH1D* h = _grid->getReference();
+
+ /// scale up the grid by the number of weights - vegas already
+ /// includes a 1/nshots term for the integration
+ /// the grid will always be stored "unweighted"
+ (*_grid) *= nweights;
+
+ /// scale up the reference histogram, since it already is correctly
+ /// weighted after the filling, but we scale it down by the number
+ /// of weights when we write it out, so that the histogram in the
+ /// root file is the actual cross section
+ /// _grids.back()->getReference()->Scale( 1/nweights );
+
+ Normalise( _grid->getReference() );
+
+ _grid->Write( gridname );
+
+}
+
+
+#endif /// HAVEAPPL
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/src/mapCache.h
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/src/mapCache.h (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/src/mapCache.h (revision 1772)
@@ -0,0 +1,98 @@
+// emacs: this is -*- c++ -*-
+//
+// @file mapCache.h
+//
+// convenient cache type, allows any number of different values of
+// observable for any give set of x1, x2, Q2, order
+//
+// Copyright (C) 2016 M.Sutton (sutt@cern.ch)
+//
+// $Id: mapCache.h, v0.0 Thu 14 Jul 2016 13:21:43 CEST sutt $
+
+
+#ifndef MAPCACHE_H
+#define MAPCACHE_H
+
+#include <iostream>
+#include <vector>
+#include <map>
+
+#include "imapCache.h"
+
+
+extern "C" int currentcacheid_();
+
+extern bool dbg;
+
+
+struct mapCache : public imapCache< std::map<double, std::vector<double> > > {
+
+public:
+
+ mapCache( int nproc=0 ) : imapCache( nproc ) {
+ static bool first = true;
+ if ( first ) {
+ std::cout << "mapCache(): nproc: " << nproc << std::endl;
+ first = false;
+ }
+ }
+
+ virtual ~mapCache() { }
+
+ /// find the weight vector corresponding to this observable value
+ /// or else add a new one to this cache
+
+ virtual std::vector<double>& weights( double obs ) {
+
+ /// do we have a weight vector for this observable ?
+ iterator itr = this->find( obs );
+ if ( itr!=this->end() ) return itr->second;
+
+ /// no? then create one and return that
+ std::pair< iterator, bool > stat = this->insert( std::make_pair( obs, std::vector<double>( mnproc, 0 ) ) ) ;
+
+ return stat.first->second;
+ }
+
+
+
+ /// have any of the kinematic variables changed ?
+
+ virtual bool changed( double obs, int order, double x1, double x2, double Q2 ) {
+ return ( mx1!=x1 || mx2!=x2 || mQ2!=Q2 || morder!=order );
+ }
+
+
+ /// update the cached kinematics
+
+ virtual void update( double obs, int order, double x1, double x2, double Q2 ) {
+
+ mfilled = true;
+
+ mx1 = x1;
+ mx2 = x2;
+ mQ2 = Q2;
+
+ morder = order;
+
+ clear();
+ }
+
+};
+
+inline std::ostream& operator<<( std::ostream& s, const mapCache& _p ) {
+ return s;
+}
+
+
+#endif // MAPCACHE_H
+
+
+
+
+
+
+
+
+
+
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/src/nnlo_interface.cxx
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/src/nnlo_interface.cxx (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/src/nnlo_interface.cxx (revision 1772)
@@ -0,0 +1,271 @@
+
+// emacs: this is -*- c++ -*-
+//
+// @file nnlo_interface.cxx
+//
+// grid filling routines for interface with
+// the nnlojet code from CITATION
+//
+// Copyright (C) 2015 M.Sutton (sutt@cern.ch) et al.
+//
+// $Id: nnlo_interface.h, v0.0 Thu 4 Jul 2015 10:25:18 CEST sutt $
+
+
+#include <cstdlib>
+#include <iostream>
+#include <sstream>
+#include <string>
+#include <cmath>
+
+#include <sys/stat.h>
+
+#include "amconfig.h"
+
+// nnlo interface header files
+#include "nnlo_interface.h"
+#include "nnlo_utils.h"
+#include "nnlo_common.h"
+
+
+#ifdef HAVE_APPL
+// applgrid headers
+#include "appl_grid/lumi_pdf.h"
+#include "applgrid_utils.h"
+#endif
+
+#ifdef HAVE_FASTNLO
+/// fastnlo headers ...
+#include "fastnlo_utils.h"
+#endif
+
+
+
+// external hook functions
+extern void (*appl_initptr)( const int& igrid, const int& id, const std::string& gridname,
+ const int& nbins, const double* bins );
+
+extern void (*appl_fillptr)( const int& igrid, const int& id, const double& obs, const double* wt, const double* wtref );
+
+extern void (*appl_termptr)( const int& igrid, const int& id );
+
+extern "C" void evolvepdf_(const double& x, const double& Q, double* xf);
+extern "C" double alphaspdf_(const double& Q);
+
+
+
+/// Declare the input and output grids
+/// Declare grid-specific functions
+static std::string _gridname; // = "nnlojet.root";
+
+
+// external hook functions
+extern "C" bool setup_nnlo_() {
+ std::cout << "[nnlo-bridge] NNLOJET INFO: setting up hook functions ..." << std::endl;
+
+ appl_initptr = nnlo::init;
+ appl_fillptr = nnlo::fill;
+ appl_termptr = nnlo::term;
+
+ return true;
+}
+
+
+
+/// Initialise the hook functions
+static bool _ready = setup_nnlo_();
+
+
+
+// #ifdef HAVE_APPL
+// //static std::int _gridname; // = "nnlojet.root";
+// static std::vector<appl::grid*> _grids;
+// static std::map<int, appl::grid*> _gridmap;
+// static std::map<int, std::string> _gridnames;
+
+// void nnlo::fill_appl_internal( appl::grid* _grid,
+// const int& order,
+// const double& x1, const double& x2, const double& Q2,
+// const double& obs, const double* wgt );
+
+// appl::grid* find( const int& id ) {
+// std::map<int, appl::grid*>::iterator gitr = _gridmap.find(id);
+// if ( gitr!=_gridmap.end() ) return gitr->second;
+// std::cerr << "find() requested grid id " << id << " not found" << std::endl;
+// return 0;
+// }
+// #endif
+
+
+template<typename T>
+std::ostream& operator<<( std::ostream& s, std::vector<T>& t ) {
+ for ( size_t i=0 ; i<t.size() ; i++ ) s << "\t" << t[i];
+ return s;
+}
+
+
+
+// Temporary pointer to APPLGRID lumi function for fastNLO
+//const lumi_pdf *fnlopdf;
+
+
+
+bool first_run = true;
+
+//!
+//! Initialisation; book interpolation grid(s)
+//!
+void nnlo::init( const int& igrid,
+ const int& id, const std::string& gridname,
+ const int& nbins, const double* bins ) {
+
+ // --- print welcome message
+ static unsigned int call_count = 0;
+ call_count++;
+ if ( call_count==1 ) {
+ std::cout << banner() << std::endl;
+ std::cout << "\tinit() " << date() << "\tcompiled: " << __DATE__ << std::endl;
+#ifdef HAVE_FASTNLO
+ // Check consistent setting of maximal scale variations in NNLOJET and nnlo-bridge
+ if ( fnloUtils::GetMaxscl() != maxscl ) {
+ std::cerr << "### nnlo::init(): ERROR! Inconsistent setting discovered of maximal scale variations, aborted!" << std::endl;
+ std::cerr << "### nnlo::init(): NNLOJET: GetMaxscl() = "<<fnloUtils::GetMaxscl()<<", nnlo_common.h: maxscl = "<<maxscl<< std::endl;
+ std::cerr << "### nnlo::init(): Please adapt setting in nnlo_common.h and recompile and relink."<< std::endl;
+ exit(9);
+ }
+#endif
+ if ( ! _ready ) {
+ std::cout<<"[nnlo::init()]. Warning. Hook-function setup setup_nnlo_() returned false value."<<std::endl;
+ }
+ }
+
+ // --- cut off grid name extension (appl,fast,both; and at the same time strange additional symbols ...)
+ // --- there might be multiple grids to be booked --> multiple init calls!
+ _gridname = gridname;
+ if ( gridname.find(".fast")!=std::string::npos ) _gridname = _gridname.substr(0,_gridname.find(".fast"));
+ else if ( gridname.find(".appl")!=std::string::npos ) _gridname = _gridname.substr(0,_gridname.find(".appl"));
+ else if ( gridname.find(".grid")!=std::string::npos ) _gridname = _gridname.substr(0,_gridname.find(".grid"));
+ else if ( gridname.find(".both")!=std::string::npos ) _gridname = _gridname.substr(0,_gridname.find(".both"));
+ else {
+ std::cerr<<"[nnlo::init()]. Error. Cannot identify gridname. Gridname must include '.fast', '.appl', '.grid', or '.both'. Exiting."<<std::endl;
+ exit(4);
+ }
+
+ std::cout << "### nnlo::init(): Analysing init call ..." << std::endl;
+ std::cout << "### nnlo::init(): grid id = " << igrid << " , hist id = " << id << " , gridname = " << _gridname <<std::endl;
+ std::cout << "### nnlo::init(): nbins = " << nbins << " , lo = " << bins[0] << " , hi = " << bins[nbins] << std::endl;
+
+ // --- check if grid-tools are available as requested
+ // --- init APPLgrid
+ if ( igrid==1 || igrid==3 ) { // APPLGRID requested
+# ifdef HAVE_APPL
+ std::cout << "### nnlo::init(): init applgrid." << std::endl;
+ init_applgrid( id, _gridname, nbins, bins );
+# else
+ std::cerr << "### nnlo::init(): APPLGRID requested, but not linked!" << std::endl;
+ std::exit(1);
+# endif
+ }
+
+ // --- init fastNLO
+ if ( igrid==2 || igrid==3 ) { // fastNLO requested
+# ifdef HAVE_FASTNLO
+ std::cout << "### nnlo::init(): init fastNLO." << std::endl;
+ init_fastnlo( id, _gridname, nbins, bins );
+# else
+ std::cerr << "### nnlo::fill(): fastNLO requested, but not linked!" << std::endl;
+ std::exit(1);
+# endif
+ }
+
+ // --- success
+ std::cout << "### nnlo::init(): End Init ..." << std::endl;
+}
+
+
+
+//
+// Fill the interpolation grid with the weights
+//
+void nnlo::fill( const int& igrid,
+ const int& id, const double& obs, const double* wt, const double* wtref ) {
+
+ static unsigned int call_count = 0;
+ call_count++;
+
+ // std::cout << "nnlo::fill() called " << call_count << " times at " << date() << std::endl;
+ // std::cout << "### nnlo::fill(): Fill grid ..." << std::endl;
+
+
+ if ( igrid==1 || igrid==3 ) { // APPLGRID requested
+# ifdef HAVE_APPL
+ /// nominal kinematics
+ /// use common/parfrac/ rather than common/pdf/
+ // double x1 = pdf_.xi1;
+ // double x2 = pdf_.xi2;
+ double x1 = parfrac_.x1;
+ double x2 = parfrac_.x2;
+ // double Q2 = scales_.rscale[0];
+ double Q2 = mur2_hook(1);
+ // double Q2 = Q*Q;
+ fill_applgrid( id, x1, x2, Q2, obs, wt );
+ fill_ref_applgrid( id, obs, wtref );
+# else
+ std::cerr << "### nnlo::fill(): APPLGRID requested, but not linked!" << std::endl;
+ std::exit(1);
+# endif
+ }
+
+
+ // --- fastNLO requested
+ if ( igrid==2 || igrid==3 ) {
+# ifdef HAVE_FASTNLO
+ fill_fastnlo( id, obs, wt, wtref );
+ fill_ref_fastnlo( id, obs, wtref );
+# else
+ std::cerr << "### nnlo::fill(): fastNLO requested, but not linked!" << std::endl;
+ std::exit(1);
+# endif
+ }
+
+ // std::cout << "### nnlo::fill(): End filling ..." << std::endl;
+}
+
+
+
+// Write out the grids
+//
+void nnlo::term( const int& igrid,
+ const int& id ) {
+
+ static unsigned int call_count = 0;
+ call_count++;
+
+ std::cout << "### nnlo::term() called " << call_count << " for igrid=" << igrid << " and id=" << id << " times at " << date() << std::endl;
+ std::cout << " iterations: " << runinfo_.itmax2 << "\n"
+ << " shots: " << runinfo_.nevents << "\n"
+ << " total: " << runinfo_.itmax2*runinfo_.nevents<<std::endl;
+
+ double nweights = runinfo_.itmax2*runinfo_.nevents;
+
+ if ( igrid==1 || igrid==3 ) { // APPLGRID requested
+# ifdef HAVE_APPL
+ term_applgrid( id, nweights );
+# else
+ std::cerr << "### nnlo::term(): APPLGRID requested, but not linked!" << std::endl;
+ std::exit(1);
+# endif
+ }
+
+ // --- fastNLO requested
+ if ( igrid==2 || igrid==3 ) {
+# ifdef HAVE_FASTNLO
+ term_fastnlo( id, nweights );
+# else
+ std::cerr << "### nnlo::term(): fastNLO requested, but not linked!" << std::endl;
+ std::exit(1);
+# endif
+ }
+
+ std::cout << "### nnlo::term(): End Term ..." << std::endl;
+}
+
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/src/nnlo_utils.cxx
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/src/nnlo_utils.cxx (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/src/nnlo_utils.cxx (revision 1772)
@@ -0,0 +1,341 @@
+//
+// @file nnlo_utils.cxx
+//
+//
+// @author M.Sutton
+//
+// Copyright (C) 2013 M.Sutton (sutt@cern.ch)
+//
+// $Id: nnlo_utils.cxx, v0.0 Tue 13 Aug 2013 12:20:03 CEST sutt $
+
+
+#include <cfloat>
+#include <cstdlib>
+#include <cmath>
+#include <string>
+#include <fstream>
+#include <sys/stat.h>
+#include <iostream>
+
+#include "amconfig.h"
+
+#include "nnlo_utils.h"
+#include "nnlo_common.h"
+
+
+/// lhapdf
+extern "C" double alphaspdf_(const double& Q);
+extern "C" bool getunitphase_();
+
+
+/// sadly, includes a return at the end
+std::string nnlo::date() {
+ time_t _t;
+ time(&_t);
+ std::string a = ctime(&_t);
+ std::string b = "";
+ for ( unsigned i=0 ; i<a.size()-1 ; i++ ) b+=a[i];
+ return b;
+}
+
+
+
+/// banner
+std::string nnlo::banner() {
+ std::string version = PACKAGE_VERSION;
+ std::string webpage = "blafasel";//PACKAGE_URL;
+ std::string banner = "\n";
+ banner += "**************************************************************************************\n";
+ banner += "* NNLOJET: E.W.N.Glover, T.Morgan, ... [arXiv:.....] *\n";
+ banner += "* nnlo-bridge: E.W.N.Glover, C. Gwenlan, T.A.Morgan, K.Rabbertz, M.R.Sutton ... *\n";
+ banner += "* APPLgrid: T. Carli et al. [arXiv:0911.2985] *\n";
+ banner += "* fastNLO: D. Britzger K.Rabbertz, M. Wobisch. et al. [arXiv:...] *\n";
+ banner += "**************************************************************************************\n";
+ banner += "\n";
+
+ banner += "\n";
+
+ banner += "nnlo-bridge version " + std::string(VERSION) + " compiled " + __DATE__ + " " + __TIME__ + "\n";
+ banner += "Web page: " + webpage + "\n";
+ banner += "\n";
+ return banner;
+}
+
+
+
+
+/// simple test if a file exists
+bool nnlo::file_exists(const std::string& s) {
+ struct stat sb;
+ if ( stat( s.c_str(), &sb)==0 ) return true; // && S_ISREG(sb.st_mode ))
+ else return false;
+}
+
+
+
+
+/// Some kinematical definitions
+double nnlo::rapidity(double E, double pz) {
+ return 0.5*std::log( (E+pz)/(E-pz) );
+}
+
+double nnlo::pt( double px, double py ) {
+ return std::sqrt( px*px + py*py );
+}
+
+double nnlo::mass(double E, double px, double py, double pz ) {
+ return std::sqrt( E*E-px*px-py*py-pz*pz );
+}
+
+#ifdef HAVE_APPL
+/// divide by bin width
+void nnlo::Normalise(TH1D* h) {
+ for ( int ibin=1 ; ibin<=h->GetNbinsX() ; ibin++ ) {
+ double width = h->GetBinLowEdge(ibin+1) - h->GetBinLowEdge(ibin);
+ h->SetBinContent( ibin, h->GetBinContent(ibin)/width );
+ }
+}
+#endif
+
+
+int nnlo::getorder( int iproc ) {
+
+ int nloops = channel_.iloops[iproc-1]; /// loop order
+ // unused:
+ // int ipars = channel_.ipars[iproc-1]; /// number of additional particles + 1
+ // int njets = inppar_.njets; /// number of jets
+
+ // if ( dbg ) std::cout << "getorder: "
+ // << "iproc " << iproc
+ // << "\tnloops " << nloops
+ // << "\tipars " << ipars
+ // << "\tnjets " << njets << " " << (nloops+ipars-njets) << std::endl;
+
+ // return nloops+ipars-njets; /// does not work for jets
+
+ /// also works for jets
+ return ndimcurrent_.norder + nloops;
+
+}
+
+
+int nnlo::GetPowLO() {
+ //!< Return power of alpha_s of Born level
+ if ( IsDIS() ) return inppar_.njets-1;
+ if ( IsPPJ() ) return std::max(inppar_.njets,2);
+ return inppar_.njets;
+}
+
+
+int nnlo::GetNLegs() {
+ static const int& iproc = currentprocess_.iproc;
+ return nnlo::GetNPow() + 1 - channel_.iloops[iproc-1];
+}
+
+
+int nnlo::GetOrder() {
+ //!< Return order of calculation
+ //!< 0: LO
+ //!< 1: NLO
+ //!< 2: NNLO
+
+ /// this shouldn't work :
+ /// currentprocess_.iproc would only ever be set
+ /// once, and would then be incorrect for subsequent processes
+ /// so relies on the current order *never* changing.
+ /// if we really want this would be better as
+ /// static const int& iproc = ndimcurrent_.norder+channel_.iloops[ currentprocess_.iproc - 1];
+ /// return iproc;
+
+ static const int& iproc = currentprocess_.iproc;
+ return ndimcurrent_.norder+channel_.iloops[iproc-1];
+
+
+ // std::cout<<"GetOrder: "<<std::endl;
+ // std::cout<<" nord: "<<ndimcurrent_.norder<<std::endl;
+ // std::cout<<" nv: "<<ndimcurrent_.nv<<std::endl;
+ // std::cout<<" ipar: "<<channel_.ipars<<std::endl;
+ // //std::cout<<" inp.njets "<<inppar_.njets<<std::endl;
+
+ // static const int& iproc = currentprocess_.iproc;
+ // int nloops = channel_.iloops[iproc-1]; // number of loops
+ // int ipars = channel_.ipars[iproc-1]; // number of additional particles + 1
+ // if ( IsDIS () )
+ // return nloops+ipars-inppar_.njets+1;
+ // else
+ // return nloops+ipars-inppar_.njets;
+
+ // if ( IsDIS() )
+ // return ndimcurrent_.norder+ndimcurrent_.nv;
+ // else {
+ // if ( ndimcurrent_.nv==2 && ndimcurrent_.norder==0 ) //bugfix
+ // return ndimcurrent_.norder+ndimcurrent_.nv-1;
+ // else
+ // return ndimcurrent_.norder+ndimcurrent_.nv;
+ // }
+}
+
+
+void nnlo::GetFillWeights( double& wgt, double& x1, double& x2, int is ) {
+ //!<
+ //!< Calculate the weight, and x-values that are needed by fastNLO and applgrid.
+ //!< Note: call-by-reference! Do not pass the variables of the common blocks here!
+ //!<
+
+ // using namespace std;
+
+ // //!< Note: call-by-reference! Do not pass the variables of the common blocks here!
+ // if ( &x1 == &parfrac_.x1 ) {
+ // std::cerr << "[nnlo::CalcFillWeights] BUG! Do not call CalcFillWeights with the common-block references!" << std::endl;
+ // std::exit(5);
+ // }
+ // if ( &x2 == &parfrac_.x2 ) {
+ // std::cerr << "[nnlo::CalcFillWeights] BUG! Do not call CalcFillWeights with the common-block references!" << std::endl;
+ // std::exit(5);
+ // }
+
+
+ // -------- NNLOJET, ./driver/core/sig.f rev3278 ----------- //
+ // !* remaining xreg[1|2] mapping
+ // if(nv.eq.0)then ! only real integration
+ // xreg1 = 0d0
+ // xreg2 = 0d0// call setParFrac_kin(x1, x2)
+ // else ! include virtual integration
+ // xreg1 = x1 + rreg1*(1d0-x1)
+ // xreg2 = x2 + rreg2*(1d0-x2)
+ // wtjac = wtjac*(1d0-x1)*(1d0-x2)
+ // call setParFrac_kin(x1, x2, xreg1, xreg2)
+ // endif
+ // -------------------------------------------------------- //
+
+ // ---- default x from NNLOJET for tree-level
+ x1 = parfrac_.x1;
+ x2 = parfrac_.x2;
+
+ //std::cout<<"x1="<<parfrac_.x1<<", x2="<<parfrac_.x2<<", xreg1="<<xregions_.xreg1<<", xreg2="<<xregions_.xreg2<<", igx="<<gridix_.igx<<", jflag="<<jacobian_.jflag<<"\twgt="<<wgt<<std::endl;
+
+ // ---- default weights for fastNLO and APPLgrid
+ wgt /= parfrac_.x1;
+ if ( !nnlo::IsDIS() ) wgt /= parfrac_.x2;
+
+ // --- fastNLO alpha_s cache
+ // TODO: How is this initialised? Zeroes?
+ static std::vector< std::pair < double , double > > asmur(maxscl);
+ double as=0;
+ // alpha_s cache: If value of mur stored for scale is in C++ vector of pairs asmur equals
+ // the current scale value is+1 in Fortran array, then take cached value.
+ if ( asmur[is].first == mur2_hook(is+1) ) {
+ as = asmur[is].second;
+ } else {
+ as = alphaspdf_(std::sqrt(mur2_hook(is+1)));
+ as = std::pow( as/(2*M_PI), GetNPow() );
+ asmur[is] = std::make_pair(mur2_hook(is+1),as);
+ }
+ wgt /= as;// we have to divide by (alpha_s/2pi)^n
+
+ // --- special treatment for NNLOJET
+ // --- undo alpha_s multiplication
+ //const double& as = strong_.as; //or use: alphaspdf_(sqrt(mur2)); not working for scale-variations
+ //const double& as = alphaspdf_(std::sqrt(mur2_hook(is+1)));
+ //wgt /= std::pow( as/(2*M_PI), GetNPow() );// we have to divide by (alpha_s/2pi)^n
+ // const double& asold = alphaspdf_(std::sqrt(mur2_hook(is+1)));
+ // double wgtold = wgt/std::pow( asold/(2*M_PI), GetNPow() );// we have to divide by (alpha_s/2pi)^n
+
+
+ //double wtjac = colourflag_.colflag ? 1./xcoljac_.xcoljac : 1;
+ if ( colourflag_.colflag ) wgt/= xcoljac_.xcoljac;
+
+ // --- calculate wgt
+ static const int& nv = ndimcurrent_.nv;
+ static const int& igx = gridix_.igx;
+ if ( nv==0 ){
+ // only real integration
+ // xreg1=0, xreg2=0
+ }
+ else {
+ // include virtual integration
+
+ if ( jacobian_.jflag ) {
+ wgt /= (1-parfrac_.x1);
+ if ( !nnlo::IsDIS() ) wgt /= (1-parfrac_.x2);
+ }
+
+ // if ( igx==1 ) {
+ // nothing to do here
+ // }
+ if ( igx==2 ) {
+ x2 /= xregions_.xreg2;
+ }
+ else if ( igx==3 ) {
+ x1 /= xregions_.xreg1;
+ }
+ else if ( igx==4 ) {
+ x1 /= xregions_.xreg1;
+ x2 /= xregions_.xreg2;
+ }
+ }
+
+ // KR: Replaced by code below
+ // check for tiny weights
+ // if ( std::abs(wgt) < TINY ) {
+ // wgt = 0;
+ // return;
+ // }
+
+ // Count occurrence of tiny weights
+ static unsigned int nzwgt = 0;
+ static unsigned int nzmss = 0;
+ static unsigned int nzmod = 1;
+ static const bool unitphase = getunitphase_();
+ if ( std::abs(wgt) < DBL_MIN && !unitphase ) {
+ nzwgt++;
+ if ( nzmss < 10 && nzwgt % nzmod == 0 ) {
+ nzmss++;
+ std::cout << "[nnlo::GetFillWeights] " << nzwgt << "th occurrence of return because of tiny scale weight = " << wgt << std::endl;
+ } else if ( nzmss == 10 ) {
+ nzmss = 0;
+ nzmod *= 10;
+ }
+ wgt = 0.0;
+ return;
+ }
+
+ // KR: Replaced by code below
+ // if ( x1<0 || x2 <0 ) {
+ // std::cerr<<"ERROR. x-value is smaller than 0. x1="<<parfrac_.x1<<", x2="<<parfrac_.x2<<", xreg1="<<xregions_.xreg1<<", xreg2="<<xregions_.xreg2<<", igx="<<igx<<", jflag="<<jacobian_.jflag<<std::endl;
+ // wgt=0;
+ // x1=1;
+ // x2=1;
+ // return;
+ // }
+
+ // Count occurrence of x values < 0; this should not happen!
+ static unsigned int nxneg = 0;
+ static unsigned int nxmss = 0;
+ static unsigned int nxmod = 1;
+ if ( (x1 < 0) || ( !nnlo::IsDIS() && x2 < 0 ) ) {
+ nxneg++;
+ if ( nxmss < 10 && nxneg % nxmod == 0 ) {
+ nxmss++;
+ std::cerr<<"[nnlo::GetFillWeights] ERROR count "<<nxneg<<" ! x1 or x2 smaller than zero in GetFillWeights! x1="<<x1<<", x2="<<x2<<std::endl;
+ std::cerr<<"[nnlo::GetFillWeights] DEBUG x1_0="<<parfrac_.x1<<", x2_0="<<parfrac_.x2<<", xreg1="<<xregions_.xreg1<<", xreg2="<<xregions_.xreg2<<", igx="<<igx<<", jflag="<<jacobian_.jflag<<std::endl;
+ } else if ( nxmss == 10 ) {
+ nxmss = 0;
+ nxmod *= 10;
+ }
+ // Set weight to zero and x values to unity
+ wgt = 0.0;
+ x1 = 1.0;
+ x2 = 1.0;
+ return;
+ }
+
+}
+
+
+/// replace the annoying LHAPDF Config destructor ...
+
+// #include "LHAPDF/Config.h"
+
+// LHAPDF::Config::~Config() {}
+
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/src/fastnlo_utils.cxx
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/src/fastnlo_utils.cxx (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/src/fastnlo_utils.cxx (revision 1772)
@@ -0,0 +1,1645 @@
+//
+// @file fastnlo_utils.cxx
+//
+//
+// @author D. Britzger, K. Rabbertz
+//
+//
+// Get preprocessor defines from autotools setup
+#include "amconfig.h"
+
+// NNLO bridge includes
+#include "nnlo_common.h"
+#include "nnlo_utils.h"
+
+// Require fastNLO
+#ifdef HAVE_FASTNLO
+
+// System includes
+#include <algorithm>
+#include <cfloat>
+#include <cmath>
+#include <fstream>
+#include <iomanip>
+#include <iostream>
+#include <sys/stat.h>
+#include <unistd.h>
+#include <utility>
+
+// fastNLO includes
+#include "fastnlo_utils.h"
+//#include "fastnlotk/fastNLOCreate.h"
+
+//-----------------------------------------------------------------------------
+//
+// --- --- --- Access external functions --- --- ---
+//
+//-----------------------------------------------------------------------------
+/// these should be in some common header !
+extern "C" double alphaspdf_(const double& Q);
+extern "C" void evolvepdf_(const double& x, const double& Q, double* xf);
+extern "C" bool getunitphase_();
+
+static double _myfillwgt = 0;
+
+
+//-----------------------------------------------------------------------------
+//
+// --- --- --- fastNLO_nnlo --- --- ---
+//
+//-----------------------------------------------------------------------------
+
+// _____________________________________________________________________ //
+void nnlo::init_fastnlo( const int& id, const std::string& gridname, const int& nbins, const double* bins ) {
+ //!<
+ //!< Remember init variables for later real initialization at first fill call, see InitFastNLO below
+ //!<
+ if ( id >= (int)fnloUtils::fInits.size() ) {
+ fnloUtils::ftable.resize(id+1);
+ fnloUtils::fIsInclJet.resize(id+1);
+ fnloUtils::fIs820GeV.resize(id+1);
+ fnloUtils::fIs137.resize(id+1);
+ fnloUtils::ftablename.resize(id+1);
+ fnloUtils::fInits.resize(id+1);
+ }
+ fnloUtils::fInits[id] = fnloUtils::fnloInit{int(id), std::string(gridname), int(nbins), bins };
+ fnloUtils::ftable[id] = NULL;
+}
+
+// _____________________________________________________________________ //
+void nnlo::fill_fastnlo( const int& id, const double& obs, const double* wt, const double* wtref ) {
+ //!<
+ //!< Fill fastNLO table; at first call do table initialization
+ //!<
+
+ // { // --- debugging
+ // say::SetGlobalVerbosity(say::INFO);
+ // double x1 = parfrac_.x1;
+ // double x2 = parfrac_.x2;
+ // double Q2 = mur2_hook(1);
+ // double xfx[13] = {0};
+ // evolvepdf_(x1,sqrt(Q2),xfx);
+ // double as = alphaspdf_(sqrt(Q2));
+
+ // std::cout<<"id="<<id<<"\tfnloProc="<<fnloUtils::sp[currentprocess_.iproc]
+ // <<"\tx1="<<x1
+ // <<"\tx2="<<x2
+ // <<"\tQ2="<<Q2
+ // <<"\tobs="<<obs
+ // <<"\tgluon-x1="<<xfx[6]
+ // <<"\tas="<<as
+ // <<"\twt="<<wt[0]<<std::endl;
+
+ // }
+
+ // --- Do some counting & print out
+ static unsigned int nfills = 0;
+ static unsigned int nmess = 0;
+ static unsigned int nfmod = 1;
+ nfills++;
+ if ( nmess < 10 && nfills % nfmod == 0 ) {
+ nmess++;
+ std::cout << "[nnlo::fill_fastnlo]: Call no. " << nfills << " of fastnlo fill routine." << std::endl;
+ } else if ( nmess == 10 ) {
+ nmess = 0;
+ nfmod *= 10;
+ }
+
+ // --- DEPRECATED, was from pre COMPOSITE histo times
+ // static const int obs_id_ptj1 = nnlo::GetNLegs() >= 1 ? obs_id_hook("ptj1") : -1;
+ // static const int obs_id_ptj2 = nnlo::GetNLegs() >= 2 ? obs_id_hook("ptj2") : -1;
+ // static const int obs_id_ptj3 = nnlo::GetNLegs() >= 3 ? obs_id_hook("ptj3") : -1;
+ // static const int obs_id_ptj4 = nnlo::GetNLegs() >= 4 ? obs_id_hook("ptj4") : -1;
+
+ // --- init fastNLO
+ if ( fnloUtils::ftable[id]==NULL ) fnloUtils::InitFastNLO(id, wt);
+ // TODO What is the following line for? Test of table creation?)
+ if ( fnloUtils::ftable[id]==NULL ) {
+ std::cout << "[nnlo::fill_fastnlo] TODO: Table not initialised for id = " << id << std::endl;
+ std::cout << "[nnlo::fill_fastnlo] Should not happen, but ignored for now." << std::endl;
+ return;
+ }
+ // Check UNIT_PHASE setting of NNLOJET
+ // If yes ==> weights nonsense, only phase space counts for grid warmup
+ // InitFastNLO stops production runs with UNIT_PHASE on
+ static const bool unitphase = getunitphase_();
+
+ // --- Some sanity checks
+ // Check process index
+ static unsigned int npidx = 0;
+ static unsigned int npmss = 0;
+ static unsigned int npmod = 1;
+ if ( fnloUtils::sp[currentprocess_.iproc] == -1 ) {
+ npidx++;
+ if ( npmss < 10 && npidx % npmod == 0 ) {
+ npmss++;
+ std::cerr << "[nnlo::fill_fastnlo] Error! Negative process index iproc = "<<currentprocess_.iproc<<", ProcId = "<<fnloUtils::sp[currentprocess_.iproc]<<std::endl;
+ } else if ( npmss == 10 ) {
+ npmss = 0;
+ npmod *= 10;
+ }
+ }
+ // Check sum of all absolute(!) weights
+ // maxscl is a global var in nnlo_common.h and must be equal to maxscl_hook info from NNLOJET (checked in nnlo::init)
+ double wtsum = 0.;
+ for ( int is = 0; is < maxscl; is++ ) {
+ wtsum += std::abs(wt[is]);
+ }
+ // Tiny weights and not grid warmup ==> nothing to do
+ static unsigned int nzwgt = 0;
+ static unsigned int nzmss = 0;
+ static unsigned int nzmod = 1;
+ // if ( fabs(wt[0]) < DBL_MIN && !unitphase ) { // WRONG!!!
+ if ( wtsum < DBL_MIN && !unitphase ) {
+ nzwgt++;
+ if ( nzmss < 10 && nzwgt % nzmod == 0 ) {
+ nzmss++;
+ std::cout << "[nnlo::fill_fastnlo] " << nzwgt << "th occurrence of return because of tiny scale weight sum = " << wtsum << std::endl;
+ } else if ( nzmss == 10 ) {
+ nzmss = 0;
+ nzmod *= 10;
+ }
+ return;
+ }
+
+ // --- Keep track of what we have calculated
+ fnloUtils::RememberContribution();
+
+ // --- Calculate weights and x-values
+ // maxscl is a global var in nnlo_common.h and must be equal to maxscl_hook info from NNLOJET (checked in nnlo::init)
+ // Furthermore it is assumed that unfilled scale variations are zero!
+ double __w2[maxscl] = {0};
+ double __x1=1, __x2=1;
+ for ( int is = 0 ; is<maxscl ;is++ ) {
+ if ( std::abs(wt[is]) > DBL_MIN ) {
+ __w2[is] = wt[is];
+ // DB DIS special cases TODO
+ if ( fnloUtils::fIs137[id] ) { // ZEUS is using 1./137
+ __w2[is] *= 1./eweakz_.amzZ/eweakz_.amzZ/137./137.;
+ }
+ if ( fnloUtils::fIs820GeV[id] ) { //
+ __w2[is] *= 820./920.;
+ }
+ nnlo::GetFillWeights(__w2[is],__x1,__x2,is);
+ // x values < 0 should not happen!
+ // Check copied to nnlo::GetFillWeights ==> weight set to zero, x values to unity
+ // static unsigned int nxneg = 0;
+ // static unsigned int nxmss = 0;
+ // static unsigned int nxmod = 1;
+ // if ( (__x1 < 0) || ( !nnlo::IsDIS() && __x2 < 0 ) ) {
+ // nxneg++;
+ // if ( nxmss < 10 && nxneg % nxmod == 0 ) {
+ // nxmss++;
+ // std::cerr<<"[nnlo::fill_fastnlo] ERROR count "<<nxneg<<" ! x1 or x2 from GetFillWeights smaller than 0! x1="<<__x1<<", x2="<<__x2<<std::endl;
+ // } else if ( nxmss == 10 ) {
+ // nxmss = 0;
+ // nxmod *= 10;
+ // }
+ // }
+ if ( unitphase ) __w2[is]=0.0;
+ } else {
+ __w2[is]=0.0;
+ }
+ }
+
+ // --- Calculate reference weight for cross check with NNLOJET; ignore during warmup
+ const bool DoTest = false;
+ if ( DoTest ) {
+ if ( !fnloUtils::ftable[id]->GetIsWarmup() && !unitphase ) {
+ fnloUtils::CalculateReferenceWeight(__w2[0],__x1,__x2);
+ }
+ }
+
+ // --- Pass variables to fastNLO
+ // Collect multiple results in case of DIS &| inclusive jets
+ std::vector<double> vObs;
+ // --- DEPRECATED, was from pre COMPOSITE histo times
+ // if ( nnlo::IsDIS() && fnloUtils::fIsInclJet[id] ) { // TODO Why AND with nnlo::DIS ???
+ // vObs.resize(nnlo::GetNLegs());
+ // if ( vObs.size()>=1 ) vObs[0] = obs_val_hook(obs_id_ptj1);
+ // if ( vObs.size()>=2 ) vObs[1] = obs_val_hook(obs_id_ptj2);
+ // if ( vObs.size()>=3 ) vObs[2] = obs_val_hook(obs_id_ptj3);
+ // if ( vObs.size()>=4 ) vObs[3] = obs_val_hook(obs_id_ptj4);
+ // for ( auto& iv : vObs ) {
+ // if ( std::abs(iv) < DBL_MIN ) iv=0.0;
+ // }
+ // } else {
+ vObs.push_back(obs);
+ // }
+
+ bool isflex = fnloUtils::ftable[id]->GetIsFlexibleScale();
+ for ( unsigned int iObs = 0 ; iObs<vObs.size() ; iObs++ ) {
+ double thisobs = vObs[iObs];
+ // TODO What for?
+ if ( (thisobs == 0) || (std::abs(thisobs) < DBL_MIN) ) {
+ std::cout<<"Filling: IsIncl="<<fnloUtils::fIsInclJet[id]<<"\tobs="<<thisobs<<"\tcontinue"<<std::endl;
+ continue;
+ }
+ // else if ( std::abs(thisobs) < DBL_MIN ) continue;
+ // TODO flex-scale arithmetics; check with DB
+ // Flexible-scale tables
+ if ( isflex ) {
+ double mf = sqrt(muf2_hook(1));
+ double mr = sqrt(mur2_hook(1));
+ std::vector<double> wscl = fnloUtils::SclIndepWgt(__w2,mf,mr);
+ double s1 = 0;
+ double s2 = 0;
+ // Enable use of ptjet as scale for inclusive jets
+ if ( fnloUtils::fIsInclJet[id] ) {
+ // DIS: s1=Q2, s2=ptjet; pp: s1=ptjet, s2=mffromruncard
+ s1 = nnlo::IsDIS() ? mf : thisobs;
+ s2 = nnlo::IsDIS() ? thisobs : mf;
+ }
+ // Use mf and mu settings from NNLOJET run card to define scale1 and scale2 for flex-scale table
+ // Recall to use proper asymmetric mur,muf settings for comparison when evaluating fastNLO grid!
+ else {
+ static int id_obs_mf = std::abs(mf/(int)(mf+0.5)-1) < 1.e-10 ? (int)(mf+0.5) : -1; // fabs(mf-round(mf)) < 1.e-10
+ static int id_obs_mr = std::abs(mr/(int)(mr+0.5)-1) < 1.e-10 ? (int)(mr+0.5) : -1;
+ if ( id_obs_mf != -1 ) mf = obs_val_hook(id_obs_mf);
+ if ( id_obs_mr != -1 ) mr = obs_val_hook(id_obs_mr);
+ s1 = nnlo::IsDIS() ? mf : mr; // muf: scale1 (pp: scale2)
+ s2 = nnlo::IsDIS() ? mr : mf; // mur: scale2 (pp: scale1)
+ if ( s1==0 || s2==0 ) {
+ std::cout<<"WARNING! scale is zero (this happens if a 2-jet observable is taken as scale for a 1-jet observable): s1="<<s1<<"\ts2="<<s2<<"\tobs="<<thisobs<<"\tIsIncl="<<fnloUtils::fIsInclJet[id]<<"\tid="<<id<<"\t"<<fnloUtils::ftable[id]->GetFilename()<<std::endl;
+ }
+ }
+ //std::cout<<"Filling: IsIncl="<<fnloUtils::fIsInclJet[id]<<"\tobs="<<thisobs<<"\ts1="<<s1<<"\ts2="<<s2<<std::endl;
+ fnloUtils::ftable[id]->fEvent.SetProcessId(fnloUtils::sp[currentprocess_.iproc]);
+ fnloUtils::ftable[id]->fEvent.SetX1(__x1);
+ if ( __x1 < 0 ) std::cerr<<"fastnlo_utils. ERROR. x1 smaller than 0!! x="<<__x1<<std::endl;
+ fnloUtils::ftable[id]->fEvent.SetX2(__x2);
+ fnloUtils::ftable[id]->fEvent.SetSigma(wtref[0]);
+ if ( fnloUtils::fIs820GeV[id] ) { //
+ double x820 = __x1 * 920./820.;
+ fnloUtils::ftable[id]->fEvent.SetX1(x820);
+ if ( x820 > 1 ) continue;
+ }
+ fnloUtils::ftable[id]->fScenario.SetObservable0(thisobs);
+ fnloUtils::ftable[id]->fScenario.SetObsScale1(s1); // in DIS, this must be Q2. In pp we take 'mur' from the runcard
+ fnloUtils::ftable[id]->fScenario.SetObsScale2(s2); // in DIS, this is mur from the runcard. In pp we take 'muf' from the runcard
+ // --- fill event within fastNLO
+ fnloUtils::ftable[id]->fEvent.SetWeight_MuIndependent(wscl[0]);
+ if ( nnlo::GetOrder() >= 1 ) {
+ if ( nnlo::IsDIS() ){
+ // TODO --> DB Is the following necessary?
+ //fnloUtils::ftable[id]->fEvent.SetWeight_MuIndependent(wscl[0] + log(s1)*(wscl[1]+wscl[2])); // DIS needs log(mu^2/q2) factors for ln(mur) and ln(muf) terms
+ fnloUtils::ftable[id]->fEvent.SetWeight_MuIndependent(wscl[0]); // DIS: new convention: no log(q2) terms any longer
+ fnloUtils::ftable[id]->fEvent.SetWeight_log_mur(wscl[1]);
+ fnloUtils::ftable[id]->fEvent.SetWeight_log_muf(wscl[2]);
+ fnloUtils::ftable[id]->fEvent.SetWeight_log_murr(wscl[3]); // DIS: no log(q2) factor here!
+ } else {
+ fnloUtils::ftable[id]->fEvent.SetWeight_log_mur(wscl[1]);
+ fnloUtils::ftable[id]->fEvent.SetWeight_log_muf(wscl[2]);
+ fnloUtils::ftable[id]->fEvent.SetWeight_log_murr(wscl[3]);
+ }
+ if ( nnlo::GetOrder() >= 2 ) {
+ fnloUtils::ftable[id]->fEvent.SetWeight_log_muff(wscl[4]);
+ fnloUtils::ftable[id]->fEvent.SetWeight_log_murf(wscl[5]);
+ }
+ }
+ fnloUtils::ftable[id]->Fill();
+ }
+ // Fixed-scale tables
+ else {
+ int nScl = fnloUtils::ftable[id]->GetScaleVarMax();
+ // int nScl = nnlo::GetOrder()>0 ? 3 : 1; // fastNLO convention
+ if ( (unitphase || fnloUtils::ftable[id]->GetIsWarmup()) && nScl != 1 ) {
+ std::cerr<<"[nnlo::fill_fastnlo] ERROR! No. of scale variations should always be one at warmup. nScl = "<<nScl<<" Aborted."<<std::endl;
+ exit(13);
+ }
+ for ( int is = 0 ; is<nScl ; is++ ) {
+ double fillweight = __w2[is];
+ // --- Ignore meaningless weights during warmup
+ if (fnloUtils::ftable[id]->GetIsWarmup()) fillweight = 1.0;
+ if (std::abs(fillweight) > DBL_MIN || unitphase) {
+ double mur2 = mur2_hook(is+1);
+ if ( fnloUtils::fIsInclJet[id] ) { // TODO
+ mur2 = thisobs*thisobs * mur2_hook(is+1)/mur2_hook(1); // TODO: Scale factors ... where are the multiple entries???
+ }
+ fnloUtils::ftable[id]->fEvent.SetProcessId(fnloUtils::sp[currentprocess_.iproc]);
+ fnloUtils::ftable[id]->fEvent.SetX1(__x1);
+ fnloUtils::ftable[id]->fEvent.SetX2(__x2);
+ fnloUtils::ftable[id]->fScenario.SetObservable0(thisobs);
+ fnloUtils::ftable[id]->fScenario.SetObsScale1(sqrt(mur2));
+ // --- Fill event into fastNLO table
+ fnloUtils::ftable[id]->fEvent.SetWeight(fillweight);
+ fnloUtils::ftable[id]->Fill(is);
+ }
+ }
+ }
+ }
+ return;
+
+}
+
+// _____________________________________________________________________ //
+void nnlo::fill_ref_fastnlo( const int& id, const double& obs, const double* wt ) {
+ // Do nothing for the moment
+ // test weights for real radiation
+ // if ( wt[0]!=0 ) std::cout<<" wt/ref="<<_myfillwgt/wt[0]<<"\t\ttest wt="<<wt[0]<<"\twtfill="<<_myfillwgt<<std::endl;
+ // if ( wt[0]!=0 ) std::cout<<" "<<"\t\ttest wt="<<wt[0]<<"\twtfill="<<_myfillwgt<<std::endl;
+
+ // KR: Use C++ macro constants like DBL_MIN instead
+ // if ( fabs(wt[0])> TINY && _myfillwgt!=0 && fabs(1-_myfillwgt/wt[0])>1.e-5 ) {
+ if ( std::abs(wt[0])> DBL_MIN && _myfillwgt!=0 && std::abs(1-_myfillwgt/wt[0])>1.e-5 ) {
+ std::cout<<"ERROR !! Your fill weight is not correctly calculated!"<<std::endl;
+ std::cout<<" wt/ref="<<_myfillwgt/wt[0]<<"\t\ttest wt="<<wt[0]<<"\twtfill="<<_myfillwgt<<std::endl;
+ std::cout<<" currentprocess_.iproc: "<<currentprocess_.iproc<< std::endl;
+ std::cout<<" xregions_.xreg1 : "<<xregions_.xreg1<<"\t1./xr1="<<1./xregions_.xreg1<< std::endl;
+ std::cout<<" xregions_.xreg2 : "<<xregions_.xreg2<<"\t1./xr1="<<1./xregions_.xreg2<< std::endl;
+ std::cout<<" parfrac_.x1 : "<<parfrac_.x1<<"\t1./x1="<<1./parfrac_.x1<<"\t(1-x1)="<<1-parfrac_.x1<<"\t1./(1-x1)="<<1./(1-parfrac_.x1)<< std::endl;
+ std::cout<<" parfrac_.x2 : "<<parfrac_.x2<<"\t1./x2="<<1./parfrac_.x2<<"\t(1-x2)="<<1-parfrac_.x2<<"\t1./(1-x2)="<<1./(1-parfrac_.x2)<< std::endl;
+ //cout<<" ndim : "<<ndimcurrent_.ndim<< std::endl;
+ std::cout<<" nv : "<<ndimcurrent_.nv<< std::endl;
+ std::cout<<" iproc : "<<currentprocess_.iproc<< std::endl;
+ std::cout<<" igx : "<<gridix_.igx<< std::endl;
+ std::cout<<" colflag : "<<colourflag_.colflag<< std::endl;
+ std::cout<<" xcoljac : "<<xcoljac_.xcoljac<<"\t\t1./xcoljac="<<1./xcoljac_.xcoljac<< std::endl;
+ std::cout<<" jacobian_.jflag : "<<jacobian_.jflag<< std::endl;
+
+ static int ii=0;
+ if ( ii++ >50 ) {
+ std::cout <<" ende test weight and 'x' value for real radiation. use gluon channels only! " <<std::endl;
+ exit(1);
+ }
+ }
+
+}
+
+// _____________________________________________________________________ //
+void nnlo::term_fastnlo( const int& id, int nweights ) {
+ //!<
+ //!< Terminate fastNLO; normalise and write table to disk
+ //!<
+
+ // TODO What does the following line mean?
+ if ( vegasiterweight_.it != runinfo_.itmax2 ) return;
+ std::cout << "[nnlo::term_fastnlo] Write fastNLO table id="<<id<<" with nweights " <<nweights << std::endl;
+
+ //! --- Set fastNLO verbosity level
+ //say::SetGlobalVerbosity(say::DEBUG);
+
+ // --- Set number of event
+ double totwgt = vegasiterweight_.swgt;
+ //double totwgt = runinfo_.nevents;
+ double wgtfac = 1./runinfo_.itmax2;
+ std::cout<<"[nnlo::term_fastnlo] VegasIterwgt: "<<vegasiterweight_.swgt<<"\tniave="<<vegasiterweight_.iave<<"\tit="<<vegasiterweight_.it<<std::endl;
+ std::cout<<"[nnlo::term_fastnlo] Runinfo itmax1: "<<runinfo_.itmax1<<"\titmax2="<<runinfo_.itmax2<<"\tnevents="<<runinfo_.nevents<<std::endl;
+ std::cout<<"[nnlo::term_fastnlo] Total weight of table: "<<totwgt<<std::endl;
+ std::cout<<"[nnlo::term_fastnlo] Weight factor: "<<wgtfac<<std::endl;
+
+ if ( fnloUtils::ftable[id]==NULL ) {
+ std::cout<<"[nnlo::term_fastnlo] WARNING! No event was filled into fastNLO table! Do not write empty file!"<<std::endl;
+ return;
+ }
+ //std::string runid = runid_.srunid;
+ fnloUtils::ftable[id]->MultiplyCoefficientsByConstant(totwgt * wgtfac);
+ fnloUtils::ftable[id]->SetNumberOfEvents(totwgt); // *runinfo_.nshota
+
+ // std::string filename = fnloUtils::ftablename[id] +"."+fnloUtils::GetOrderName( &fnloUtils::fNlNe )+"."+runid+".tab";
+ // std::string filename = fnloUtils::ftablename[id] +"."+fnloUtils::GetOrderName( &fnloUtils::fNlNe )+".tab.gz";
+ std::string filename = fnloUtils::ftablename[id]+".tab.gz";
+ fnloUtils::ftable[id]->SetFilename(filename);
+
+ // --- Write table
+ if (fnloUtils::ftable[id]->GetIsWarmup())
+ std::cout << "[nnlo::term_fastnlo] fastNLO warmup run finished ..." << std::endl;
+ else
+ std::cout << "[nnlo::term_fastnlo] fastNLO production run finished, writing table '" << fnloUtils::ftablename[id] << "'." << std::endl;
+
+// fnloUtils::ftable[id]->WriteTable(filename); // buggy. This needs a fix!
+ fnloUtils::ftable[id]->WriteTable();
+
+ return;
+}
+
+
+
+//-----------------------------------------------------------------------------
+//
+// --- --- --- fastNLO specific functions --- --- ---
+//
+//-----------------------------------------------------------------------------
+
+// _____________________________________________________________________ //
+fastNLO::GeneratorConstants fnloUtils::GetNNLOJET_GenConsts() {
+ //!< Get NNLOJET specific generator constants for this interface
+ // The following is written to each contribution of a fastNLO table
+ // Most of it should not be changed
+ fastNLO::GeneratorConstants gc;
+ // The code name normally should be set here
+ gc.Name = "NNLOJET_rev_5088"; //!< Name and version of generator
+ // The references to quote depend on the process; request to get them from NNLOJET
+ // Alternatively update this default from the fastNLO steering card (to be implemented)
+ gc.References.push_back("Example for single jet inclusive production."); //!< References for generator
+ std::string pname = "Please adapt to selected process: " + nnlo::GetProcessName();
+ gc.References.push_back(pname);
+ gc.References.push_back("Please cite:"); //!< References for generator
+ gc.References.push_back("Currie, J.; Glover, E.W.N. & Pires, J., Phys. Rev. Lett., 2017, 118, 072002 [arXiv:1611.01460]"); //!< References for generator
+ // This should not be changed
+ gc.UnitsOfCoefficients = 15; //!< NNLOJET provides cross sections in femtobarns fb
+ return gc;
+}
+
+
+
+// _____________________________________________________________________ //
+fastNLO::ProcessConstants fnloUtils::GetNNLOJET_ProcConstsPP() {
+ //!< Get default process constants for pp processes
+ // The following is filled mostly from NNLOJET and should not be changed
+ std::vector<std::vector<int> > partLiCos = fnloUtils::sp.GetPartonCombinations();
+ if ( partLiCos.empty() ) {
+ std::cerr<<"[fnloUtils::GetNNLOJET_ProcConstsPP] Error. No parton combinations found. "
+ << "Please read config file into subprocess-class: fnloUtils::sp. Aborting!"<<std::endl;
+ exit(5);
+ }
+
+ fastNLO::ProcessConstants pc;
+ pc.LeadingOrder = nnlo::GetPowLO(); //!< Power in alpha_s of LO process
+ pc.NPDF = 2; //!< No. of PDFs involved
+ int nprocs = partLiCos.size(); // These are derived and filled per process and order; so only one of LO, NLO, NNLO is active at any time
+ pc.NSubProcessesLO = nprocs; //!< No. of LO subprocesses
+ pc.NSubProcessesNLO = nprocs; //!< No. of NLO subprocesses
+ pc.NSubProcessesNNLO = nprocs; //!< No. of NNLO subprocesses
+ pc.IPDFdef1 = 3; //!< Flag 1 to define PDF linear combinations of partonic subprocesses
+ pc.IPDFdef2 = 0; //!< Flag 2 to define PDF linear combinations of partonic subprocesses
+ pc.IPDFdef3LO = nprocs; //!< Flag 3 to define PDF LCs at LO
+ pc.IPDFdef3NLO = nprocs; //!< Flag 3 to define PDF LCs at NLO
+ pc.IPDFdef3NNLO = nprocs; //!< Flag 3 to define PDF LCs at NNLO
+ pc.NPDFDim = 2; //!< Internal storage mode for PDF LCs, 2: full-matrix ==> we do not need 'asymmetric processes'
+ //!< PDF Linear combinations in two different formats (used only if IPDFdef2==0) (Why two formats? TODO)
+ pc.PDFCoeffLO = VectorToPairs(partLiCos); //!< PDF Linear combinations in pairs
+ pc.PDFCoeffNLO = pc.PDFCoeffLO;
+ pc.PDFCoeffNNLO = pc.PDFCoeffLO;
+ pc.PDFLiCoInLO = partLiCos; //!< PDF Linear combinations
+ pc.PDFLiCoInNLO = pc.PDFLiCoInLO;
+ pc.PDFLiCoInNNLO = pc.PDFLiCoInLO;
+ pc.AsymmetricProcesses.clear(); //!< Specify processes that need to be exchanged in half-matrix notation, when xmin>xmax (only if NPDFDim==1)
+ pc.Name = nnlo::GetProcessName(); //!< Name of process as given in NNLOJET runcard
+ pc.References.push_back("PC: Please check and modify NNLOJET references according to selected process."); // references for processes
+ return pc;
+}
+
+
+
+// _____________________________________________________________________ //
+fastNLO::ProcessConstants fnloUtils::GetNNLOJET_ProcConstsDIS() {
+ //!< Get default process constants for DIS processes
+ // The following is filled mostly from NNLOJET and should not be changed
+ std::vector<std::vector<int> > partLiCos = fnloUtils::sp.GetPartonCombinations();
+ if ( partLiCos.empty() ) {
+ std::cerr<<"[fnloUtils::GetNNLOJET_ProcConstsDIS] Error. No parton combinations found. "
+ << "Please read config file into subprocess-class: fnloUtils::sp. Aborting!"<<std::endl;
+ exit(5);
+ }
+
+ fastNLO::ProcessConstants pc;
+ pc.LeadingOrder = nnlo::GetPowLO(); //!< Power in alpha_s of LO process
+ pc.NPDF = 1; //!< No. of PDFs involved
+ int nprocs = partLiCos.size(); // These are derived and filled per process and order; so only one of LO, NLO, NNLO is active at any time
+ pc.NSubProcessesLO = nprocs; //!< No. of LO subprocesses
+ pc.NSubProcessesNLO = nprocs; //!< No. of NLO subprocesses
+ pc.NSubProcessesNNLO = nprocs; //!< No. of NNLO subprocesses
+ pc.IPDFdef1 = 2; //!< Flag 1 to define PDF linear combinations of partonic subprocesses
+ pc.IPDFdef2 = 0; //!< Flag 2 to define PDF linear combinations of partonic subprocesses
+ pc.IPDFdef3LO = nprocs; //!< Flag 3 to define PDF LCs at LO
+ pc.IPDFdef3NLO = nprocs; //!< Flag 3 to define PDF LCs at NLO
+ pc.IPDFdef3NNLO = nprocs; //!< Flag 3 to define PDF LCs at NNLO
+ pc.NPDFDim = 0; //!< Internal storage mode for PDF LCs, 0: linear, only one PDF involved here
+ //!< PDF Linear combinations in two different formats (used only if IPDFdef2==0) (Why two formats? TODO)
+ pc.PDFCoeffLO = VectorToPairs(partLiCos); //!< PDF Linear combinations in pairs
+ pc.PDFCoeffNLO = pc.PDFCoeffLO;
+ pc.PDFCoeffNNLO = pc.PDFCoeffLO;
+ pc.PDFLiCoInLO = partLiCos; //!< PDF Linear combinations
+ pc.PDFLiCoInNLO = pc.PDFLiCoInLO;
+ pc.PDFLiCoInNNLO = pc.PDFLiCoInLO;
+ pc.AsymmetricProcesses.clear(); //!< Specify processes that need to be exchanged in half-matrix notation, when xmin>xmax (only if NPDFDim==1)
+ pc.Name = nnlo::GetProcessName(); //!< Name of process as given in NNLOJET runcard
+ pc.References.push_back("PC: Please check and modify NNLOJET references according to selected process."); // references for processes
+ return pc;
+}
+
+
+
+// _____________________________________________________________________ //
+fastNLO::ScenarioConstants fnloUtils::GetNNLOJET_ScenConsts(const int& id) {
+ //!< Set default scenario constants as appropriate with NNLOJET
+ // The following is partially filled from NNLOJET
+ // Some settings can/should be adapted from a steering file to modify what kind of table is created
+ fastNLO::ScenarioConstants sc;
+
+ //!> Scenario name set to default of NNLOJET process name
+ //!> CHANGE in steering file to desired value; no white space allowed here!
+ sc.ScenarioName = nnlo::GetProcessName();
+ //!> Scenario description, empty by default
+ //!> CHANGE in steering file to desired documentation lines
+ sc.ScenarioDescription.clear();
+ sc.ScenarioDescription.push_back("Please replace this by desired description of scenario");
+ //!> For direct comparison to Rivet analyses this must be set to the units, in which the data were published
+ //!> Usually LHC Rivet analyses are working in units of [pb] = 10^-12 [b]
+ //!> CHANGE in steering file to required value
+ sc.PublicationUnits = 12;
+ //!> So far the interface to NNLOJET supports only 1-dim histograms
+ //!> DO NOT CHANGE!
+ sc.DifferentialDimension = 1;
+ //!> fastNLO allows to define Labels (symbol and unit) for the measurement dimensions
+ //!> (from outer to inner "loop"), e.g. "|y|" and "pT_[GeV]".
+ //!> With NLOJet++ this helps to define the observables to be calculated in an automatized way!
+ //!> Here we will set it via the gridname from the NNLOJET run card
+ //!> CHANGE in steering file if desired
+ const std::string& gridname = fnloUtils::fInits[id].gridname;
+ size_t ipos = gridname.find_last_of("_");
+ if (ipos < std::string::npos) ipos=ipos+1;
+ std::string dimlabel = gridname.substr(ipos,std::string::npos);
+ sc.DimensionLabels.clear();
+ sc.DimensionLabels.push_back(dimlabel);
+ //!> Specify for each dimension whether
+ //!> 0 : the cross section is NOT differential,
+ //!> i.e. there are two bin borders (but NO division (normalization) by bin width);
+ //!> 1 : the cross section is point-wise differential, i.e. only one point is given;
+ //!> 2 : the cross section is bin-wise differential, i.e. there are two bin borders and division by bin width
+ //!> Since NNLOJET provides bin-wise differential distributions use option 2
+ //!> DO NOT CHANGE!
+ sc.DimensionIsDifferential.clear();
+ sc.DimensionIsDifferential.push_back(2);
+ //!> Calculate bin width from lower and upper bin boundaries; this is the fastNLO default
+ //!> CHANGE in steering file to desired value
+ sc.CalculateBinSize = true;
+ //!> Possibility to provide additional normalization factor, e.g. of 2 for bins in |y|
+ //!> The default, of course, is unity
+ //!> CHANGE in steering file to desired value
+ sc.BinSizeFactor = 1.;
+ //!> If 'CalculateBinSize' is 'false', provide a vector with individual 'bin widths' for normalization.
+ //!> This probably should only be done individually for each NNLOJET histo/fastNLO grid!
+ //!> CHANGE in individual steering file unless only one histogram is filled by NNLOJET
+ //!> sc.BinSize = ;
+ //!> The binning is read from NNLOJET in warmup run and later reread via warmup files
+ //!> DO NOT CHANGE HERE but in the NNLOJET run card
+ //!> Scales and scale factors must be set in NNLOJET run card
+ // TODO Could eventually be extracted from NNLOJET runcard (SCALES)
+ //!> CHANGE ONLY FOR WARMUP RUN in steering file if desired
+ sc.ScaleDescriptionScale1 = "scale1"; //< "<pT_1,2>_[GeV]" # This defines the scale to be used (Note: The 1st scale should always be in units of [GeV]!)
+ sc.ScaleDescriptionScale2 = "scale2"; //< "pT_max_[GeV]" # Specify 2nd scale name and unit (ONLY for flexible-scale tables)
+ // TODO
+ //!> The center-of-mass energy (in GeV) is read from NNLOJET
+ //!> DO NOT CHANGE HERE but in the NNLOJET run card
+ sc.CenterOfMassEnergy = inputpar_.roots;
+ //!> IDs for PDF of 1st and (if any) 2nd colliding hadron (following PDG convention: proton 2212).
+ //!> The colliding hadrons should be read from NNLOJET ... TODO
+ //!> DO NOT CHANGE HERE but NNLOJET if possible
+ sc.PDF1 = 2212;
+ sc.PDF2 = 2212;
+ //!> Filename of fastNLO output table; will be overwritten below per histogram id
+ //!> DO NOT CHANGE in steering file unless only one histogram is filled by NNLOJET
+ sc.OutputFilename = "fastNLO";
+ //!> Number of decimal digits to store in output table (def.=8, which is normally fully sufficient).
+ //!> DO NOT CHANGE in steering file unless really necessary
+ sc.OutputPrecision = 8;
+ //!> Assume that zlib is available and output compression can be used
+ //!> CHANGE in steering file if compression not possible or not desired
+ sc.OutputCompression = true;
+ //!> Create fixed- or flexible-scale table
+ //!>
+ //!> Fixed-scale tables require to define one central scale plus a fixed set of mu_f scale factors (at least one, e.g. 1.0)
+ //!> For each mu_f scale factor a copy of the interpolation grid is stored.
+ //!> The mu_r dependence is evaluated analytically; the mu_f dependence can be evaluated analytically up to NLO using HOPPET.
+ //!> Beyond that only the defined set of mu_f scale factors can be used
+ //!>
+ //!> Flexible-scale tables store separately weights up to the following scale dependences:
+ //!> independent, log(mu_r), log(mu_f), log(mu_r)^2, log(mu_f)^2, log(mu_r)*log(mu_f)
+ //!> It is possible to store two different settings for the central scale, but the first one must be in GeV.
+ //!> It is possible to redefine the central scale separately for mu_r and mu_f to either scale1, scale2, or a function of the two like sqrt(mu_1^2 + mu_2^2)
+ //!> Flexible-scale tables require more information from a generator, are larger in size, and somewhat slower than fixed-scale tables.
+ //!> Possible with NNLOJET, but check carefully.
+ //!> CHANGE in steering file if desired
+ sc.FlexibleScaleTable = false;
+ //!> Factorization scale variations must be set in accordance with NNLOJET SCALES settings.
+ //!> Only needed for fixed-scale tables beyond LO.
+ //!> List of scale factors must include factor '1.0'.
+ //!> Scale factors will be ordered according to fastNLO convention: (1, min, ... , max). Default: {1.0, 0.5, 2.0}
+ //!>
+ sc.ScaleVariationFactors.clear();
+ sc.ScaleVariationFactors.push_back(1.0);
+ if ( ! nnlo::GetPowLO() ) {
+ sc.ScaleVariationFactors.push_back(0.5);
+ sc.ScaleVariationFactors.push_back(2.0);
+ }
+ //!> Specify if binning is read from fScenConst or from warmup; with NNLOJET binning from run card is written to warmup
+ //!> DO NOT CHANGE
+ sc.ReadBinningFromSteering = true;
+ //!> Do not check once more the binning between warmup and steering; binning is taken from NNLOJET run card anyway
+ //!> DO NOT CHANGE
+ sc.IgnoreWarmupBinningCheck = true;
+ //!> Apply reweighting of pdfs for an optimized interpolation, def.=true.
+ //!> DO NOT CHANGE in steering file unless you really know what you do
+ sc.ApplyPDFReweighting = true;
+ //!> Set limits for scale nodes to bin borders, if possible. Good if scale equals the binned observable.
+ //!> CHANGE FOR WARMUP RUN in steering file if desired
+ sc.CheckScaleLimitsAgainstBins = true;
+ //!> # -------------------------------------------------------------------- #
+ //!> # Choose fastNLO interpolation kernels and distance measures
+ //!> # - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
+ //!> # Currently implemented interpolation kernels
+ //!> # Catmull
+ //!> # Lagrange
+ //!> # OneNode
+ //!> # Linear
+ //!> #
+ //!> # Currently implemented distance measures
+ //!> # linear
+ //!> # loglog025 eq. to (log(log(4*x)))
+ //!> # log10
+ //!> # sqrtlog10 eq. to sqrt(log_10(x))
+ //!> # -------------------------------------------------------------------- #
+ //!> CHANGE in steering file ONLY if required AFTER checking interpolation quality for an observable
+ //!> If necessary probably should be changed individually for each NNLOJET histo/fastNLO grid using specific steering files
+ //!>
+ //!> x-interpolation (momentum fraction)
+ sc.X_Kernel = "Lagrange";
+ sc.X_DistanceMeasure = "sqrtlog10";
+ sc.X_NNodes = 20; // APPLgrid setting is 30, but leads to very large tables
+ sc.X_NNodeCounting = "NodesPerBin"; // Corresponds to fastNLO v14 & v21 standard
+ if ( nnlo::IsDIS() ) {
+ sc.X_Kernel = "Catmull";
+ sc.X_DistanceMeasure = "log10"; // We like to have many nodes at LOW-x for DIS!
+ sc.X_NNodes = 18;
+ }
+ //!> mu1-interpolation (scale)
+ sc.Mu1_Kernel = "Lagrange";
+ sc.Mu1_DistanceMeasure = "loglog025";
+ sc.Mu1_NNodes = 6;
+ //!> mu2-interpolation (scale); only for flexible-scale tables
+ sc.Mu2_Kernel = "Lagrange";
+ sc.Mu2_DistanceMeasure = "loglog025";
+ sc.Mu2_NNodes = 6;
+
+ //!> CHANGE in steering file in accordance with NNLOJET run card!
+ sc.InclusiveJets = false; // Use NNLOJET COMPOSITE histos to store multiple entries per event
+ // However, in order to use multiple scale values per event, this flag must be set!
+
+ return sc;
+}
+
+
+//-----------------------------------------------------------------------------
+//
+// --- --- --- fnloUtils --- --- --
+//
+//-----------------------------------------------------------------------------
+
+// _____________________________________________________________________ //
+void fnloUtils::SetNNLOJETDefaultBinning(fastNLO::ScenarioConstants& sc, const int& nbins, const double& lo) {
+ //!< set binning as used by NNLOJET
+ sc.SingleDifferentialBinning.resize(nbins+1);
+ for (int i=0; i<=nbins; i++) sc.SingleDifferentialBinning[i] = (&lo)[i];
+ std::cout<<"DefaultBinning: "<<lo;
+ for (int i=1; i<=nbins; i++) std::cout<<"\t"<<sc.SingleDifferentialBinning[i];
+ std::cout<<std::endl;
+ return ;
+ // double binwidth = (hi-lo)/nbins;
+ // sc.SingleDifferentialBinning[0] = lo;
+ // std::cout<<"DefaultBinning: "<<lo;
+ // for (int i=1; i<=nbins; i++) {
+ // sc.SingleDifferentialBinning[i] = sc.SingleDifferentialBinning[i-1]+binwidth;
+ // std::cout<<"\t"<<sc.SingleDifferentialBinning[i];
+ // }
+ // std::cout<<std::endl;
+}
+
+
+
+// // _____________________________________________________________________ //
+// std::string fnloUtils::GetProcessName() {
+// //!< get name of the process from NNLOJET
+// std::string process(process_.sproc);
+// process.erase(std::remove(process.begin(), process.end(), ' '),process.end());
+// return process;
+// }
+
+
+
+// _____________________________________________________________________ //
+std::string fnloUtils::GetContribName(int nloops, int ne) {
+ //!<
+ //!< Get name of contributions
+ //!<
+
+ /*
+ * LO = #looops=0 #extra-emissions=0
+ * V = #looops=1 #extra-emissions=0
+ * R = #looops=0 #extra-emissions=1
+ * VV = #looops=2 #extra-emissions=0
+ * RV = #looops=1 #extra-emissions=1
+ * RR = #looops=0 #extra-emissions=2
+ */
+
+ if ( nloops==-1 && ne==-1 ) {
+ std::cout<<"Works only for having a CURRENT event !!!"<<std::endl;
+ nloops = ndimcurrent_.nv;
+ static const int& nord = nnlo::GetOrder();
+ // int njet = inppar_.njets;
+ // if ( nnlo::IsDIS() ) njet -= 1;
+ ne = nord - nloops;
+ }
+ if ( nloops == 0 && ne == 0) return "LO";
+ else if ( nloops == 1 && ne == 0) return "V";
+ else if ( nloops == 0 && ne == 1) return "R";
+ else if ( nloops == 2 && ne == 0) return "VV";
+ else if ( nloops == 1 && ne == 1) return "RV";
+ else if ( nloops == 0 && ne == 2) return "RR";
+ else return "Contrib Name NOT IDENTIFIED: "+std::to_string(nnlo::GetOrder());
+
+}
+
+
+
+// // _____________________________________________________________________ //
+// int fnloUtils::GetOrder() {
+// static const int& nord = ndimcurrent_.norder ;
+// static const int& nv = ndimcurrent_.nv ;
+// return nord + nv;
+// }
+
+
+
+// _____________________________________________________________________ //
+std::string fnloUtils::GetOrderName( std::set<std::pair<int,int> >* nlne ) {
+ //!< get order of calculation as 'string'
+
+ if ( nlne == NULL) {
+ int nord = nnlo::GetOrder();
+ //static const int& nord = ndimcurrent_.norder;
+ if ( nord == 0 ) return "LO";
+ else if ( nord == 1 ) return "NLO";
+ else if ( nord == 2 ) return "NNLO";
+ }
+ else if ( fnloUtils::fIDs.size()==1 ) {
+ // only one channel was calculated
+ // take: 'chZYZ'
+ char buf[5];
+ sprintf(buf, "%03d", *fnloUtils::fIDs.begin() );
+ return "ch"+std::string(buf);
+ }
+ else {
+ std::set<std::string> names;
+ for ( auto i : *nlne ) names.insert(fnloUtils::GetContribName(i.first,i.second));
+ if ( names.count("R") && names.count("V") ) {
+ names.erase("R");
+ names.erase("V");
+ names.insert("NLO");
+ }
+ if ( names.count("RR") && names.count("VV") && names.count("RV") ) {
+ names.erase("RR");
+ names.erase("RV");
+ names.erase("VV");
+ names.insert("NNLO");
+ }
+ std::string ret;
+ for ( auto i : names )
+ if ( ret.empty() ) ret = i;
+ else ret += "+"+i;
+ return ret;
+ }
+ return ""; //?
+}
+
+
+// _____________________________________________________________________ //
+int fnloUtils::GetMaxscl() {
+ return maxscl_hook; // nnlo_common.
+}
+
+// _____________________________________________________________________ //
+int fnloUtils::GetSeed() {
+ //!< get seed value
+
+ // new
+ return iseed_hook; // nnlo_common.
+
+ // old
+ /*
+ std::vector<std::string> tok;
+ char clog[101];
+ strcpy(clog,log_.slogname);
+ char *p = strtok(clog, ".");
+ while (p) {
+ tok.push_back(p);
+ p = strtok(NULL, ".");
+ }
+ if ( tok.size()<=2 ) return -1;
+ std::string sN = tok[tok.size()-2];
+ sN.erase(0,1);
+ int ret = atoi( sN.c_str());
+ return ret;
+ */
+}
+
+
+
+// _____________________________________________________________________ //
+std::string fnloUtils::GetConfigDir() {
+ //!< Get directory where config files are stored
+ // CONFIGDIR is set by NNLOJET at 'make' time! Later changes per environment variable not possible!
+ std::string configdir(getenv("CONFIGDIR")); // Read from NNLOJET setting
+ std::cout << "[fnloUtils::GetConfigDir()] CONFIGDIR of NNLOJET found to be: " << configdir << std::endl;
+ if ( configdir == "" ) {
+ std::cout << "[fnloUtils::GetConfigDir()] WARNING! CONFIGDIR of NNLOJET not set, "
+ << "using default $PWD/process instead." << std::endl;
+ configdir = std::string(getenv("PWD"))+"/process";
+ }
+ // --- test config directory
+ struct stat myStat;
+ std::cout << "[fnloUtils::GetConfigDir()] Status of CONFIGDIR found to be: " << stat(configdir.c_str(), &myStat) << std::endl;
+ if ( !((stat(configdir.c_str(), &myStat) == 0) && (((myStat.st_mode) & S_IFMT) == S_IFDIR)) ) {
+ std::cout << "[fnloUtils::GetConfigDir()] WARNING! Could not find the config directory " <<
+ configdir << std::endl;
+ // try default in case CONFIGDIR was set differently above
+ configdir = std::string(getenv("PWD"))+"/process";
+ std::cout << "[fnloUtils::GetConfigDir()] Trying default setting for CONFIGDIR of NNLOJET: " << configdir << std::endl;
+ if ( !((stat(configdir.c_str(), &myStat) == 0) && (((myStat.st_mode) & S_IFMT) == S_IFDIR)) ) {
+ std::cout << "[fnloUtils::GetConfigDir()] WARNING! Could not find the config directory " <<
+ configdir << std::endl;
+ // another and next to last guess (Grid site)
+ configdir = "/cvmfs/etp.kit.edu/nnlo/src/driver/process";
+ std::cout << "[fnloUtils::GetConfigDir()] Trying grid site setting for CONFIGDIR: " << configdir << std::endl;
+ if ( !((stat(configdir.c_str(), &myStat) == 0) && (((myStat.st_mode) & S_IFMT) == S_IFDIR)) ) {
+ std::cout << "[fnloUtils::GetConfigDir()] WARNING! Could not find the config directory " <<
+ configdir << std::endl;
+ // really last guess (local user install); procedure to be rethought ...
+ configdir = std::string(getenv("HOME"))+"/local/src/NNLOJET-rev3678/driver/process";
+ std::cout << "[fnloUtils::GetConfigDir()] Trying local install setting for CONFIGDIR: " << configdir << std::endl;
+ if ( !((stat(configdir.c_str(), &myStat) == 0) && (((myStat.st_mode) & S_IFMT) == S_IFDIR)) ) {
+ std::cerr << "[fnloUtils::GetConfigDir()] ERROR! Really could not find a config directory " <<
+ configdir << std::endl;
+ exit(2);
+ }
+ }
+ }
+ }
+ std::cout<<"[fnloUtils::GetConfigDir()] Using config directory: "<<configdir<<std::endl;
+ return configdir;
+}
+
+
+
+// _____________________________________________________________________ //
+std::string fnloUtils::GetConfigFile() {
+ //!< get name of the process
+ std::string pname = nnlo::GetProcessName();
+ std::cout << "[fnloUtils::GetConfigFile()] The process name is reported to be: " << pname << std::endl;
+ if ( pname == "1jet" || pname == "2jet" ) {
+ pname = pname.substr(1,std::string::npos);
+ std::cout << "[fnloUtils::GetConfigFile()] For subprocess configuration shortening process name to: " << pname << std::endl;
+ }
+ std::string fname = pname + "-" + fnloUtils::GetOrderName() + ".config";
+ fname = fnloUtils::GetConfigDir() + "/" + pname + "/" + fname;
+ std::cout << "[fnloUtils::GetConfigFile()] Using config file: " << fname << std::endl;
+ return fname;
+}
+
+
+
+// _____________________________________________________________________ //
+std::vector<std::string> fnloUtils::GetConfigFiles() {
+ //!< get name of the process
+ std::string pname = nnlo::GetProcessName();
+ std::cout << "[fnloUtils::GetConfigFiles()] The process name is reported to be: " << pname << std::endl;
+ if ( pname == "1jet" || pname == "2jet" ) {
+ pname = pname.substr(1,std::string::npos);
+ std::cout << "[fnloUtils::GetConfigFiles()] For subprocess configuration shortening process name to: " << pname << std::endl;
+ }
+ std::vector<std::string> fnames;
+ std::string pref = fnloUtils::GetConfigDir()+"/"+pname+"/"+pname;
+ if ( nnlo::GetOrder() == 0 ) {
+ fnames.push_back( pref+"-LO.config");
+ }
+ else if ( nnlo::GetOrder() == 1 ){
+ fnames.push_back( pref+"-R.config");
+ fnames.push_back( pref+"-V.config");
+ }
+ else if ( nnlo::GetOrder() == 2 ){
+ fnames.push_back( pref+"-RR.config");
+ fnames.push_back( pref+"-RV.config");
+ fnames.push_back( pref+"-VV.config");
+ }
+ std::cout<<"[fnloUtils::GetConfigFiles()] Found order "<<nnlo::GetOrder()<<". Using config files: "<<std::endl;
+ for ( auto f : fnames ) std::cout<<"\t"<<f<<std::endl;
+ return fnames;
+}
+
+
+
+// _____________________________________________________________________ //
+void fnloUtils::RememberContribution() {
+ //!< fill the variable fNlNe
+ //!< and remember the calculated contributions
+
+ static const int& iproc = currentprocess_.iproc;
+ int nloops = channel_.iloops[iproc-1];
+ int nreal = ndimcurrent_.norder;
+
+ // static const int& nloops = ndimcurrent_.nv;
+ // int nord = nnlo::GetOrder();//ndimcurrent_.norder;
+ // // int njet = inppar_.njets;
+ // // if ( nnlo::IsDIS() ) njet -= 1;
+ // // int ne = nord - nloops;
+ // //std::cout<<"nl="<<nloops<<"\tne="<<ne<<"\t\tnord="<<nord<<"\tIsDIS="<<nnlo::IsDIS()<<"\tnjet="<<njet<<std::endl;
+ fnloUtils::fNlNe.insert({ nloops,nreal });
+ fnloUtils::fIDs.insert(iproc);
+
+}
+
+
+
+// _____________________________________________________________________ //
+double fnloUtils::CalculateReferenceWeight(double wgt, double x1, double x2) {
+ //!< calculate the reference weight
+ //!< and compare it later with the ref-weight from NNLOJET
+ //!<
+ //!< Set value: _myfillwgt
+ //!< Need access to evolvepdf_()
+ //!< needs either strong_.as or alphaspdf_()
+ //!<
+
+ double PDF = 0;
+ double muf2 = muf2_hook(1);
+ const std::vector<std::vector<int > >& pc = fnloUtils::sp.GetInitialValues();
+ if ( nnlo::IsDIS() ) {
+ double xfx[13] = {0};
+ evolvepdf_(x1,sqrt(muf2),xfx);
+ for ( unsigned int ip = 0 ; ip < pc[currentprocess_.iproc].size() ; ip+=2 ) {
+ PDF += xfx[pc[currentprocess_.iproc][ip]+6];
+ }
+ }
+ else {
+ double xfx1[13] = {0};
+ double xfx2[13] = {0};
+ evolvepdf_(x1,sqrt(muf2),xfx1);
+ evolvepdf_(x2,sqrt(muf2),xfx2);
+ for ( unsigned int ip = 0 ; ip < pc[currentprocess_.iproc].size() ; ip+=2 ) {
+ PDF += xfx1[pc[currentprocess_.iproc][ip]+6]*xfx2[pc[currentprocess_.iproc][ip+1]+6];
+ }
+ }
+
+ static const double& as = strong_.as; //alphaspdf_(sqrt(mur2));
+ _myfillwgt = wgt * PDF * pow( as/(2*M_PI) , nnlo::GetNPow() ) ;
+ return _myfillwgt;
+}
+
+
+
+// _____________________________________________________________________ //
+std::vector<double> fnloUtils::SclIndepWgt(const double* wt, double muf, double mur) {
+ //! Calculate scale independent weights for fastNLO
+
+ // Do not use debug mode for mass production!
+ static const bool Debug = false;
+ static bool First = true;
+ if ( First && Debug ) {
+ First = false;
+ std::cout << "[fnloUtils::SclIndepWgt]: Running in DEBUG mode. Do not use for mass production!" << std::endl;
+ }
+
+ std::vector<double> ret{0,0,0,0,0,0}; // return value
+ std::vector<double> sret{0,0,0,0,0,0}; // simple sum
+ std::vector<double> oret{0,0,0,0,0,0}; // ordered sum
+ std::vector<double> kret{0,0,0,0,0,0}; // Kahan sum
+
+ if ( nnlo::GetOrder()==0 ) {
+ //! LO does not have scale dependent terms
+ sret[0] = wt[0];
+ oret[0] = wt[0];
+ kret[0] = wt[0];
+ ret[0] = kret[0];
+ return ret;
+ }
+
+ double wamax = DBL_MAX;
+ const double EPS = 1.e-3; // aim for permille precision
+ const double SMALL = 1.e-12; // relative weight limit to consider some deviations > EPS negligible
+ static const unsigned int nSclVNNLO = 6;
+ const unsigned int nSclV = nSclVNNLO;
+ // Simplify in case of NLO, to be checked!!
+ // unsigned int nSclV = nnlo::GetOrder()==1 ? 3 : 6; // only NLO
+
+ if ( nSclV==3 ) {
+ std::cerr << "[fnloUtils::SclIndepWgt]: Do not use yet NLO with nSclV = " << nSclV << "! Aborted!" << std::endl;
+ exit(1);
+ // -- not working, to be checked!
+ // static const double SclInvNLO[3][3] = {{3, -2, 0},{0, 1, -1},{-1, 0, 1}}; // i+1
+ // for ( unsigned int j = 0 ; j<nSclV ; j++ ){
+ // for ( unsigned int i = 0 ; i<nSclV ; i++ ){
+ // ret[j] += wt[i+1]*SclInvNLO[j][i];
+ // }
+ // //if ( fabs(ret[j]/wt[1]) < EPS ) ret[j] = 0;
+ // }
+ // -- not working, to be checked!
+ // const double SclInvNLO[3][3] = {{5.5,-2,-2.5},{-1.5,1,0.5},{-0.5,0,0.5}}; // i+3
+ // for ( unsigned int j = 0 ; j<nSclV ; j++ ){
+ // for ( unsigned int i = 0 ; i<nSclV ; i++ ){
+ // ret[j] += wt[i+3]*SclInvNLO[j][i];
+ // }
+ // }
+ } else {
+ // This decomposition matrix is based on i.a. fixed scale choices of
+ // exp^1, exp^(3/2), exp^(5/2);
+ static const double SclInvNNLO[nSclVNNLO][nSclVNNLO] = {
+ { 13., 4., -9., -9., 1., 1.},
+ {-14./3., -2., 2., 11./2., 0., -5./6.},
+ {-14./3., -2., 11./2., 2., -5./6., 0.},
+ { 1./3., 0., 0., -1./2., 0., 1./6.},
+ { 1./3., 0., -1./2., 0., 1./6., 0.},
+ { 1., 1., -1., -1., 0., 0.} };
+ double sum[nSclVNNLO] = {0., 0., 0., 0., 0., 0.};
+ int nRet = ( nnlo::GetOrder()==1 ) ? 4 : nSclV;
+
+ // static unsigned int nprnt = 0;
+ // static unsigned int npmod = 1;
+ // if ( nprnt < 10 && nprnt % npmod == 0 ) {
+ // nprnt++;
+ // for ( int i = 0 ; i<=nRet ; i++ ){
+ // std::cout << std::setprecision(16) << "AAA i = " << i << ", wt[i] = " << wt[i] << std::endl;
+ // }
+ // } else if ( nprnt == 10 ) {
+ // nprnt = 0;
+ // npmod *= 10;
+ // }
+
+ wamax = std::abs(wt[0]);
+ for ( int j = 0 ; j<nRet ; j++ ){
+ wamax = std::max(std::abs(wt[j+1]),wamax);
+ double wasum = 0.;
+ for ( unsigned int i = 0 ; i<nSclV ; i++ ){ // DB
+ // for ( unsigned int i = 0 ; i<nRet ; i++ ){ // KR TEST
+ sum[i] = wt[i+1]*SclInvNNLO[j][i];
+ // sret[j] += sum[i];
+ wasum += std::abs(sum[i]);
+ }
+ // oret[j] = fnloUtils::OrderedSum(sum,nSclVNNLO);
+ kret[j] = fnloUtils::KahanSum(sum,nSclVNNLO);
+ // std::cout << "RD1 j = " << j << ", normal sum[j] = " << sret[j] << std::endl;
+ // std::cout << "RD2 j = " << j << ", ordered sum[j] = " << oret[j] << ", o/s = " << oret[j]/sret[j] << std::endl;
+ // std::cout << "RD3 j = " << j << ", Kahan sum[j] = " << kret[j] << ", k/s = " << kret[j]/sret[j] <<std::endl;
+ // Numerically Kahan summing is the most precise
+ ret[j] = kret[j];
+
+ if ( Debug ) {
+ // Set small weights to zero? Not necessary. Does not occur anyway for DBL_MIN ...
+ static unsigned int nzwgt = 0;
+ static unsigned int nzmss = 0;
+ static unsigned int nzmod = 1;
+ if ( ret[j] != 0. && std::abs(ret[j])/wasum < DBL_MIN ) {
+ nzwgt++;
+ if ( nzmss < 10 && nzwgt % nzmod == 0 ) {
+ nzmss++;
+ std::cout << "[fnloUtils::SclIndepWgt]: " << nzwgt << "th occurrence of tiny scale weight = " << ret[j] << std::endl;
+ } else if ( nzmss == 10 ) {
+ nzmss = 0;
+ nzmod *= 10;
+ }
+ }
+ }
+ }
+
+ // if ( nnlo::GetOrder()==1 ) {
+ // // ret[3]=0;
+ // ret[4]=0;// must be exact zero for fastNLO
+ // ret[5]=0;// must be exact zero for fastNLO
+ // }
+
+ }
+
+ // Try to reconstruct original weight wt[0] as cross check
+ if ( Debug ) {
+ double r = log(mur*mur);
+ double f = log(muf*muf);
+ double sum[6] = { ret[0], r*ret[1], f*ret[2], r*r*ret[3], f*f*ret[4], r*f*ret[5] };
+ // double sMyWgt0 = 0.;
+ // for ( unsigned int i=0; i<nSclVNNLO; i++) {
+ // sMyWgt0 += sum[i];
+ // }
+ // double oMyWgt0 = OrderedSum(sum,nSclVNNLO);
+ double kMyWgt0 = KahanSum(sum,nSclVNNLO);
+ // Numerically Kahan summing is the most precise
+ double MyWgt0 = kMyWgt0;
+
+ //double MyWgtNLO = ret[0] + r*ret[1] + f*ret[2];
+ //double MyRefWgt = ret[0] + 2*r*ret[1] + 2*f*ret[2] + 4*r*r*ret[3] + 4*f*f*ret[4] + 4*r*f*ret[5];
+
+ // Count misreconstructed weights for first scale
+ static unsigned int nmwgt = 0;
+ static unsigned int nmmss = 0;
+ static unsigned int nmmod = 1;
+ if ( std::abs(MyWgt0/wt[0]-1) > EPS || !std::isfinite(MyWgt0)) {
+ if ( std::abs(MyWgt0)/wamax > SMALL || std::abs(wt[0])/wamax > SMALL ) {
+ nmwgt++;
+ if ( nmmss < 10 && nmwgt % nmmod == 0 ) {
+ nmmss++;
+ std::cout << "[fnloUtils::SclIndepWgt]: " << nmwgt << "th occurrence of large misreconstructed weight!" << std::endl;
+ std::cout<<"[fnloUtils::SclIndepWgt]: LARGE discrepant weight! Original weight = " << wt[0] << ", reconstructed weight = " << MyWgt0 << ", deviation (per mille) = " << 1000*(std::abs(MyWgt0/wt[0])-1) << ", weight max = " << wamax << std::endl;
+ std::cout<<"[fnloUtils::SclIndepWgt]: Original weight/max = " << std::abs(wt[0])/wamax << ", reconstructed weight/max = " << std::abs(MyWgt0)/wamax << std::endl;
+ } else if ( nmmss == 10 ) {
+ nmmss = 0;
+ nmmod *= 10;
+ }
+ }
+ std::cerr<<"[fnloUtils::SclIndepWgt]. Warning!"<<std::endl;
+ std::cerr<<"[fnloUtils::SclIndepWgt]. Discrepant weight! Original weight = " << wt[0] << ", reconstructed weight = " << MyWgt0 << ", weight max = " << wamax << std::endl;
+ std::cerr<<"[fnloUtils::SclIndepWgt]. Original weight/max = " << std::abs(wt[0])/wamax << ", reconstructed weight/max = " << std::abs(MyWgt0)/wamax << std::endl;
+ std::cout<<" muf = " << muf << ", mur = " << mur << std::endl;
+ std::cout<<" wt [] =";
+ for ( unsigned int i = 0 ; i<7 ; i++ ) std::cout<<"\t"<<wt[i];
+ std::cout<<"\t\t"<<std::endl;
+
+ std::cout<<" ln(mur^2) []";
+ for ( unsigned int i = 0 ; i<7 ; i++ ) std::cout<<"\t"<<log(mur2_hook(i+1));
+ std::cout<<"\t\t"<<std::endl;
+
+ std::cout<<" ln(muf^2) []";
+ for ( unsigned int i = 0 ; i<7 ; i++ ) std::cout<<"\t"<<log(muf2_hook(i+1));
+ std::cout<<"\t\t"<<std::endl;
+
+ std::cout<<" ret[]";
+ for ( unsigned int j = 0 ; j<6 ; j++ )std::cout<<"\t"<<ret[j];
+ std::cout<<std::endl;
+ std::cout<<" oret[]";
+ for ( unsigned int j = 0 ; j<6 ; j++ )std::cout<<"\t"<<oret[j];
+ std::cout<<std::endl;
+ std::cout<<" kret[]";
+ for ( unsigned int j = 0 ; j<6 ; j++ )std::cout<<"\t"<<kret[j];
+ std::cout<<std::endl;
+
+ // exit(3);
+ }
+ }
+
+ return ret;
+}
+
+
+// Kahan summing to improve numerical precision
+double fnloUtils::KahanSum( double in[], unsigned int insize ) {
+ double ksum = in[0];
+ double c = 0.;
+ for ( unsigned int i = 1; i<insize ; i++ ){
+ double y = in[i] - c;
+ double t = ksum + y;
+ c = (t - ksum) - y;
+ ksum = t;
+ }
+ return ksum;
+}
+
+
+// Ordered summing (in descending order here) to improve numerical precision
+double fnloUtils::OrderedSum( double in[], unsigned int insize ) {
+ double osum = 0.;
+ std::vector<double> vin;
+ for ( unsigned int i = 0 ; i<insize ; i++ ){
+ vin.push_back(in[i]);
+ }
+ auto func=[](double a, double b) { return std::abs(a) > std::abs(b); };
+ std::sort(std::begin(vin), std::end(vin), func);
+ for ( unsigned int i = 0 ; i<insize ; i++ ){
+ osum += vin[i];
+ }
+ return osum;
+}
+
+
+
+// _____________________________________________________________________ //
+void fnloUtils::InitFastNLO( const int& id, const double* wt ) {
+ // --- Debug printout of NNLOJET input
+ // static const int& iproc = currentprocess_.iproc;
+ // int nloops = channel_.iloops[iproc-1]; /// loop order
+ // int ipars = channel_.ipars[iproc-1]; /// number of additional particles + 1
+ // std::cout<<" process_.iproc "<<currentprocess_.iproc<< std::endl;
+ // std::cout<<" nloops "<<nloops<< std::endl;
+ // std::cout<<" ipars "<<ipars<< std::endl;
+ // std::cout<<" ndim_.norder "<<ndimcurrent_.norder<< std::endl;
+ // std::cout<<" inppar_.njets "<<inppar_.njets<< std::endl;
+ // std::cout<<" order_.ieorder "<<order_.ieorder<< std::endl;
+ // std::cout<<" GetNPow "<<nnlo::GetNPow()<< std::endl;
+ // std::cout<<" GetOrder() "<<nnlo::GetOrder()<< std::endl;
+ // std::cout<<" GetMaxscl() "<<fnloUtils::GetMaxscl()<<", maxscl = "<<maxscl<< std::endl;
+ // for (int is = 1; is<maxscl+1; is++) {
+ // std::cout<<" is = " << is << ", mur(is) = " << sqrt(mur2_hook(is)) << ", muf(is) = " << sqrt(mur2_hook(is)) << std::endl;
+ // // std::cout<<" is = " << is << ", xmur(is) = " << scales_.rscale[is] << ", xmuf(is) = " << scales_.facscale[is] << std::endl;
+ // }
+ // std::cout<< std::endl;
+
+ // --- Welcome
+ std::cout << "[fnloUtils::InitFastNLO] fastNLO initialisation for NNLOJET histo/fastNLO grid with id = " << id << std::endl;
+ if ( fnloUtils::ftable[id] != NULL ) return;
+ _myfillwgt = 0;
+ std::cout << "[fnloUtils::InitFastNLO] NNLOJET provides process: " << nnlo::GetProcessName() << std::endl;
+
+ // --- Get settings of histogram [id] from NNLOJET
+ const std::string& gridname = fnloUtils::fInits[id].gridname;
+ const int& nbins = fnloUtils::fInits[id].nbins;
+ const double& lo = *(fnloUtils::fInits[id].lo);
+ //const double& hi = *(fnloUtils::fInits[id].hi);
+
+ // --- Read config file with parton combinations
+ if ( fnloUtils::sp.GetConfigFile().empty() )
+ fnloUtils::sp.ReadConfigFiles(fnloUtils::GetConfigFiles());
+
+ // --- Collect info for naming
+ std::string wrmfile;
+ std::string steerfile;
+ std::string gsteerfile;
+ std::string tablename;
+ std::string runid = runid_.srunid;
+ std::string pname = nnlo::GetProcessName();
+ std::string jname = jobname_.sjobname;
+ jname.erase(remove(jname.begin(), jname.end(), ' '),jname.end());
+ std::string fname = outfile_.fname;
+ // fname.erase(remove(fname.begin(), fname.end(), ' '),fname.end());
+ size_t ipos = fname.find_first_of(' ');
+ fname.erase(ipos, std::string::npos);
+ int seed = fnloUtils::GetSeed();
+ std::cout << "[fnloUtils::InitFastNLO] Gridname: " << gridname << std::endl;
+ std::cout << "[fnloUtils::InitFastNLO] Integration input: " << fname << std::endl;
+ std::cout << "[fnloUtils::InitFastNLO] Process name: " << pname << ", job name: " << jname << std::endl;
+ // If unitphase, i.e. grid warmup, then name wrmfile individually for each subprocess for later check & merge
+ if ( getunitphase_() ) {
+ wrmfile = pname+"."+jname+"."+gridname;
+ wrmfile += ".wrm";
+ std::cout << "[fnloUtils::InitFastNLO] Warmup is run for subprocess: " << jname << std::endl;
+ std::cout << "[fnloUtils::InitFastNLO] Warmup filename: " << wrmfile << std::endl;
+ }
+ // If NOT unitphase, i.e. production, then expect identical wrmfile for all subprocesses
+ else {
+ wrmfile = pname+"."+gridname;
+ wrmfile += ".wrm";
+ std::cout << "[fnloUtils::InitFastNLO] NOTE: The warmup file for production is expected to be identical for all subprocesses!" << std::endl;
+ std::cout << "[fnloUtils::InitFastNLO] The expected warmup filename therefore does not contain any subprocess label (job name) anymore. Please check!" << std::endl;
+ std::cout << "[fnloUtils::InitFastNLO] Expected warmup filename: " << wrmfile << std::endl;
+ }
+ ipos = gridname.find_first_of("_");
+ std::string scenname = gridname.substr(0,ipos);
+ // Steerfile with settings specific to a NNLOJET histo/fastNLO grid
+ steerfile = pname+"."+gridname;
+ steerfile += ".str";
+ // Global steerfile with settings valid for all NNLOJET histos/fastNLO grids
+ // Values already set via specific steerfile are KEPT --> WARNINGS
+ gsteerfile = pname+"."+scenname;
+ gsteerfile += ".str";
+ tablename = pname+"."+jname+"."+runid+"."+gridname+".s"+std::to_string(seed);
+ std::cout << "[fnloUtils::InitFastNLO] Steering filename: " << steerfile << std::endl;
+ std::cout << "[fnloUtils::InitFastNLO] Global steering filename: " << gsteerfile << std::endl;
+ std::cout << "[fnloUtils::InitFastNLO] Tablename: " << tablename << std::endl;
+
+ // --- Set NNLOJET specific default 'GeneratorConstants'
+ fastNLO::GeneratorConstants gc = fnloUtils::GetNNLOJET_GenConsts();
+
+ // --- Set process specific default 'ProcessConstants'
+ // DIS or pp?
+ fastNLO::ProcessConstants pc = nnlo::IsDIS() ? fnloUtils::GetNNLOJET_ProcConstsDIS() : fnloUtils::GetNNLOJET_ProcConstsPP();
+
+ // --- Set scenario specific default 'ScenarioConstants'
+ fastNLO::ScenarioConstants sc = fnloUtils::GetNNLOJET_ScenConsts(id);
+ // --- Set scenario binning from NNLOJET info
+ fnloUtils::SetNNLOJETDefaultBinning(sc, nbins, lo);
+
+ // --- If existing read fastNLO steering file with settings specific for NNLOJET histo/fastNLO grid [id]
+ bool fexist = !access(steerfile.c_str(), R_OK);
+ if ( fexist) READ_NS(steerfile,wrmfile);
+ // read_steer::print(wrmfile);
+
+ // --- The following ugly hacks are now replaced via steering files ==> to be removed
+ if ( gridname.find("iff") != std::string::npos ) {
+ std::cerr << "[fnloUtils::InitFastNLO] DEPRECATED! Please change fastNLO interpolation using steering file mechanism!" << std::endl;
+ std::cerr << "[fnloUtils::InitFastNLO] Do not rely on presence of \"iff\" string in gridname anymore." << std::endl;
+ std::cerr << "[fnloUtils::InitFastNLO] Special settings are ignored." << std::endl;
+ // sc.X_NNodes = 50;
+ // sc.X_DistanceMeasure = "sqrtlog10"; // we like to have increasingly many nodes at high-x
+ }
+ if ( nnlo::IsDIS() && gridname.find("q2") == std::string::npos ) {
+ std::cerr << "[fnloUtils::InitFastNLO] DEPRECATED! Please change fastNLO interpolation using steering file mechanism!" << std::endl;
+ std::cerr << "[fnloUtils::InitFastNLO] Do not rely on presence of \"q2\" string in gridname anymore." << std::endl;
+ std::cerr << "[fnloUtils::InitFastNLO] Special settings are ignored." << std::endl;
+ // std::cout<<"[fnloUtils::InitFastNLO] IsDIS, but not differential as function of q2, using more q2 nodes, less x-nodes"<<std::endl;
+ // sc.Mu1_NNodes = 14; // more q2 nodes
+ // sc.Mu2_NNodes = 6;
+ // if ( gridname.find("iff") != std::string::npos ) sc.X_NNodes = 42;
+ }
+ // DEPRECATED: Fix hack to select between flexible- and fixed-scale table
+ // std::cout<<"[fnloUtils::InitFastNLO] NNLOJET scale choices: muf2(1) = " << muf2_hook(1) << "\tmur2(1) = " << mur2_hook(1) << std::endl;
+ // std::cout<<"[fnloUtils::InitFastNLO] NNLOJET scale choices: muf2(2) = " << muf2_hook(2) << "\tmur2(2) = " << mur2_hook(2) << std::endl;
+ // if ( muf2_hook(2) == mur2_hook(2) && fabs(sqrt(mur2_hook(2))/exp(1)-1)<1.e-6) {
+ // std::cout<<"[fnloUtils::InitFastNLO] Flexible-scale table chosen."<< std::endl;
+ // sc.FlexibleScaleTable = true;
+ // } else if ( muf2_hook(1) == mur2_hook(1) ) {
+ // std::cout<<"[fnloUtils::InitFastNLO] Fixed-scale table chosen."<< std::endl;
+ // sc.FlexibleScaleTable = false;
+ // } else {
+ // std::cout<<"[fnloUtils::InitFastNLO] Unrecognized scale settings. Please choose either a fixed-scale or a flexible-scale table."<< std::endl;
+ // std::cout<<" Exiting."<< std::endl;
+ // exit(4);
+ // }
+
+ // DEPRECATED
+ // fnloUtils::fIsInclJet[id] = (gridname.find("ji") != std::string::npos);
+ // fnloUtils::fIs820GeV[id] = (gridname.find("820") != std::string::npos);
+ // fnloUtils::fIs137[id] = (gridname.find("137") != std::string::npos);
+
+ // --- Initialise fastNLOCreate, use table object from now on
+ sc.OutputFilename = tablename;
+ fnloUtils::ftablename[id] = tablename;
+ fnloUtils::ftable[id] = new fastNLOCreate(gc,pc,sc,wrmfile,gsteerfile);
+
+ // --- Print out all steering settings so far for this table id/wrmfile
+ read_steer::print(wrmfile);
+
+ // --- Test consistency of fastNLO warmup and UNIT_PHASE setting in NNLOJET
+ if ( fnloUtils::ftable[id]->GetIsWarmup() && !getunitphase_() ) {
+ std::cerr<<"[fnloUtils::InitFastNLO] ERROR! No warmup file found, hence this cannot be a production run, but the job is NOT running with UNIT_PHASE. Aborted!"<< std::endl;
+ std::cerr<<"[fnloUtils::InitFastNLO] Please recall that warmup files are produced and named per subprocess."<< std::endl;
+ std::cerr<<"[fnloUtils::InitFastNLO] Hence they have to be merged and renamed to: "<< wrmfile << std::endl;
+ exit(5);
+ } else if ( !fnloUtils::ftable[id]->GetIsWarmup() && getunitphase_() ) {
+ std::cerr<<"[fnloUtils::InitFastNLO] ERROR! Warmup file found, hence this is a production run, but the job is running WITH UNIT_PHASE. Aborted!"<< std::endl;
+ exit(6);
+ }
+
+ // --- Further consistency tests
+ bool isflex = fnloUtils::ftable[id]->GetIsFlexibleScale();
+ bool isincljets = fnloUtils::ftable[id]->GetIsInclusiveJets();
+ if ( isflex ) {
+ std::cout << "[fnloUtils::InitFastNLO] The flexible-scale table format has been chosen." << std::endl;
+ } else {
+ std::cout << "[fnloUtils::InitFastNLO] The fixed-scale table format has been chosen." << std::endl;
+ }
+ std::cout << "[fnloUtils::InitFastNLO] Power of alpha_s(): " << nnlo::GetNPow() << ", order of calculation: " << nnlo::GetOrder() << std::endl;
+ fnloUtils::ftable[id]->SetOrderOfAlphasOfCalculation(nnlo::GetNPow());
+ fnloUtils::fIsInclJet[id] = isincljets;
+ fnloUtils::ftable[id]->SetCacheSize(30);
+ // For flexible-scale tables; TODO reactivate some checks!
+ if ( isflex ) {
+ // double q2 = muf2_hook(1);
+ // double p2 = mur2_hook(1);
+ // std::cout<<"mur: ";
+ // for ( int is = 0 ; is<maxscl ; is++ ) std::cout<<"\t"<<sqrt(mur2_hook(1+is)) ;
+ // std::cout<<std::endl;
+ // std::cout<<"muf: ";
+ // for ( int is = 0 ; is<maxscl ; is++ ) std::cout<<"\t"<<sqrt(muf2_hook(1+is)) ;
+ // std::cout<<std::endl;
+
+ // double muf2[7];
+ // double mur2[7];
+ // for ( int is = 0 ; is<maxscl ; is++ ) {
+ // muf2[is] = muf2_hook(is+1);
+ // mur2[is] = mur2_hook(is+1);
+ // }
+ // std::cout<<fabs( mur2[1] / q2 - 1. )<<std::endl;
+ // std::cout<<fabs( muf2[2] / p2 - 1. )<<std::endl;
+ // std::cout<<fabs( muf2[3] / p2 - 1. )<<std::endl;
+ // std::cout<<fabs( mur2[4] / (p2*p2) - 1. )<<std::endl;
+ // std::cout<<fabs( muf2[5] / (q2*q2) - 1. )<<std::endl;
+ // std::cout<<fabs( muf2[6] / (q2*q2) - 1. )<<std::endl;
+ // const double EPS = 1.e-10;
+ // if ( fabs( muf2[1] / q2 - 1 ) > EPS || fabs( mur2[1] / q2 - 1 ) > EPS) {
+ // std::cerr<<"[nnlo::fill_fastnlo]. Error. This is a flexible scale table, but the definition of the scales does not agree with the convention [1]"<< std::endl;
+ // exit(3);
+ // }
+ // if ( fabs( muf2[2] / p2 - 1 ) > EPS || fabs( mur2[2] / p2 - 1 ) > EPS ) {
+ // std::cerr<<"[nnlo::fill_fastnlo]. Error. This is a flexible scale table, but the definition of the scales does not agree with the convention [2]"<< std::endl;
+ // exit(3);
+ // }
+ // if ( fabs( muf2[3] / p2 - 1 ) > EPS || fabs( mur2[3] / q2 - 1 ) > EPS) {
+ // std::cerr<<"[nnlo::fill_fastnlo]. Error. This is a flexible scale table, but the definition of the scales does not agree with the convention [3]"<< std::endl;
+ // exit(3);
+ // }
+ // if ( fabs( muf2[4] / q2 - 1 ) > EPS || fabs( mur2[4] / (p2*p2) - 1 ) > EPS) {
+ // std::cerr<<"[nnlo::fill_fastnlo]. Error. This is a flexible scale table, but the definition of the scales does not agree with the convention [4]"<< std::endl;
+ // exit(3);
+ // }
+ // if ( fabs( muf2[5] / (q2*q2) - 1 ) > EPS || fabs( mur2[5] / p2 - 1 ) > EPS ) {
+ // std::cerr<<"[nnlo::fill_fastnlo]. Error. This is a flexible scale table, but the definition of the scales does not agree with the convention [5]"<< std::endl;
+ // exit(3);
+ // }
+ // // TEST
+ // if ( fabs( muf2[6] / (q2*q2) - 1 ) > EPS || fabs( mur2[6] / (p2*p2) - 1 ) > EPS ) {
+ // std::cerr<<"[nnlo::fill_fastnlo]. Error. This is a flexible scale table, but the definition of the scales does not agree with the convention [6]"<< std::endl;
+ // exit(3);
+ // }
+ }
+ // For fixed-scale tables
+ else {
+ // Get list of scale variations requested for fastNLO
+ const std::vector<double> ScaleVars = fnloUtils::ftable[id]->GetScaleVariations();
+ unsigned int nSclfN = ScaleVars.size();
+ for ( unsigned int is=0; is<nSclfN; is++) {
+ std::cout << "[fnloUtils::InitFastNLO] Scale variations requested for fastNLO: is = "<<is<<", ScaleVar = "<<ScaleVars[is]<<std::endl;
+ }
+ // Only one muf scale variation, 1.0, needs to be stored at LO
+ if ( nnlo::GetOrder() == 0 ) {
+ if ( ScaleVars.size() != 1 || std::abs(ScaleVars[0]-1.0) > DBL_MIN ) {
+ std::cerr<<"[fnloUtils::InitFastNLO] ERROR! At LO only one scale factor of 1.0 is necessary. Aborted!"<< std::endl;
+ exit(11);
+ }
+ // The central (first) scale in NNLOJET must have mur=muf for fixed-scale tables
+ std::cout<<"[fnloUtils::InitFastNLO] NNLOJET central scale: mur2 = " << mur2_hook(1) << ", muf2 = " << muf2_hook(1) << ", mur2/muf2 = " << mur2_hook(1)/muf2_hook(1) << std::endl;
+ if ( std::abs(mur2_hook(1)/muf2_hook(1)-1.0) > DBL_MIN ) {
+ std::cerr<<"[fnloUtils::InitFastNLO] ERROR! Fixed-scale tables must have mur=muf for the first scale variation. Aborted!"<< std::endl;
+ exit(11);
+ }
+ } else {
+ // Calculate scale factors from NNLOJET SCALES and compare to requested scale variations
+ unsigned int nSclNN = 0;
+ for (int is = 1; is<maxscl+1; is++) {
+ if (std::abs(mur2_hook(is)) > DBL_MIN) { // Filled?
+ nSclNN++;
+ std::cout<<"[fnloUtils::InitFastNLO] NNLOJET scale var is: " << is << ", mur(is) = " << sqrt(mur2_hook(is)) << ", muf(is) = " << sqrt(mur2_hook(is)) << ", wt(is) = " << wt[is] << std::endl;
+ }
+ }
+ if ( !fnloUtils::ftable[id]->GetIsWarmup() && nSclNN != nSclfN ) { // TODO: More NNLOJET scale vars than for fastNLO (only muf variations need to be stored)
+ std::cerr<<"[fnloUtils::InitFastNLO] ERROR! Unequal no. of scale variations requested. Aborted!"<< std::endl;
+ std::cerr<<"[fnloUtils::InitFastNLO] NNLOJET: nSclNN = "<<nSclNN<<", fastNLO nScaleVars = "<<nSclfN<< std::endl;
+ std::cerr<<"[fnloUtils::InitFastNLO] It is possible to have many NNLOJET variations, but to store in fastNLO only the ones with muf different."<< std::endl;
+ std::cerr<<"[fnloUtils::InitFastNLO] This has not yet been implemented. TODO"<< std::endl;
+ exit(12);
+ }
+ for (unsigned int is = 1; is<nSclfN+1; is++) {
+ std::cout<<"[fnloUtils::InitFastNLO] NNLOJET scale factors^2 are: " << is << ", mur2(is)/mur2(1) = " << mur2_hook(is)/mur2_hook(1) << ", muf2(is)/muf2(1) = " << muf2_hook(is)/muf2_hook(1) << std::endl;
+ std::cout<<"[fnloUtils::InitFastNLO] fastNLO scale factor^2 is: " << is-1 << ", ScaleVar^2 = " << ScaleVars[is-1]*ScaleVars[is-1] << std::endl;
+ if ( (std::abs(mur2_hook(is)/mur2_hook(1) - ScaleVars[is-1]*ScaleVars[is-1]) > DBL_MIN) ||
+ (std::abs(muf2_hook(is)/muf2_hook(1) - ScaleVars[is-1]*ScaleVars[is-1]) > DBL_MIN ) ) {
+ std::cerr<<"[fnloUtils::InitFastNLO] ERROR! NNLOJET and fastNLO scale factors differ, please correct. Aborted!"<< std::endl;
+ std::cerr<<"[fnloUtils::InitFastNLO] More flexibility is possible, but has not yet been implemented. TODO"<< std::endl;
+ exit(12);
+ }
+ }
+ }
+ // OLD CODE
+ // // TODO: The scale setting interface is extremely intransparent ==> IMPROVE
+ // // --- adapt for muf-variations for fixed-scale tables
+ // static const double sclfac[maxscl] = {1,0.5,2.,0.505, 202,0.005,200}; // ugly convention: muf*0.5, muf*2, mur+muf * 0.5, mur+muf* 2, mur*0.5 mur*2
+ // for ( int is = 1 ; is<maxscl && fabs(wt[is]) > DBL_MIN; is++ ) {
+ // // std::cout<<"[fnloUtils::InitFastNLO] wt["<<is<<"]="<<wt[is]<< std::endl;
+ // sc.ScaleVariationFactors.push_back(sclfac[is]);
+ // }
+ // TODO Improve. Only 0,1,2 of NNLOJET runcard SCALES are accessed.
+ // SCALES must be defined to fulfil the following conditions!
+ // for ( int is = 0 ; is< 3 && is<(int)sc.ScaleVariationFactors.size() ; is++ ){
+ // // mur(1) is base scale
+ // double mur0 = mur2_hook(1);
+ // //double muf0 = muf2_hook(1);
+ // // This loops over 1,2,3
+ // double mur2 = mur2_hook(is+1);
+ // double muf2 = muf2_hook(is+1);
+ // if ( is==0 && mur2!=muf2 ) { // mur==muf for first "scale variation"
+ // std::cerr<<"[nnlo::fill_fastnlo]. Error. First scale setting: muf and mur must be identical, but muf2/mur2="<<muf2/mur2<< std::endl;
+ // exit(2);
+ // }
+ // // else if ( is==1 && fabs(muf2/mur2/0.25-1) > 1.e-6 ) {
+ // // std::cerr<<"[nnlo::fill_fastnlo]. Error. Second scale variation must be muf*0.5=mur*0.5, but muf2/mur2="<<muf2/mur2<< std::endl;
+ // // exit(2);
+ // // }
+ // // else if ( is==2 && fabs(muf2/mur2/4-1) > 1.e-6 ) {
+ // // std::cerr<<"[nnlo::fill_fastnlo]. Error. Third scale variation must be muf*2=mur*2, but muf2/mur2="<<muf2/mur2<< std::endl;
+ // // exit(2);
+ // // }
+ // if ( fabs(muf2/mur2-1) > 1.e-6 ) { // mur/muf = 1 for all "scale variations" ==> symmetric variation of muf, mur versus base scale mur(1)
+ // std::cerr<<"[nnlo::fill_fastnlo]. Error. Scale variation is="<<is<<" must be muf*0.5=mur*0.5, but muf2/mur2="<<muf2/mur2<< std::endl;
+ // exit(2);
+ // }
+ // if ( is==1 && fabs(mur2/mur0/0.25-1) > 1.e-6 ) { // mur/mu0 = 2 && muf/mu0 = 2
+ // std::cerr<<"[nnlo::fill_fastnlo]. Error. Second scale variation must be muf*0.5=mur*0.5, but mur2/mur2(0)="<<mur2/mur0<< std::endl;
+ // exit(2);
+ // }
+ // if ( is==2 && fabs(mur2/mur0/4.-1) > 1.e-6 ) { // mur/mu0 = 1/2 && muf/mu0 = 1/2
+ // std::cerr<<"[nnlo::fill_fastnlo]. Error. Second scale variation must be muf*2=mur*2, but mur2/mur2(0)="<<mur2/mur0<< std::endl;
+ // exit(2);
+ // }
+ // }
+ // // if ( fabs(wt[3])>TINY ) {
+ // // KR: Use C++ macro constants like DBL_MIN instead
+ // if ( fabs(wt[3])>DBL_MIN ) {
+ // std::cerr<<"[nnlo::fill_fastnlo]. Error. fastNLO only support scale settings of [0] mur=muf; [1] muf*0.5=mur*0.5; [2] muf*2=muf*2"<< std::endl; // Yes.
+ // exit(2);
+ // }
+ }
+
+ std::cout << "[fnloUtils::InitFastNLO] fastNLO grid no. "<<id<<" initialized." << std::endl;
+ return ;
+}
+
+
+
+// _____________________________________________________________________ //
+namespace fnloUtils {
+
+ // _____________________________________________________________________ //
+ fnloSuprocesses::fnloSuprocesses(const std::string& config){
+ //!< constructor reading config file with subprocesses
+ ReadConfigFile(config);
+ }
+
+ // _____________________________________________________________________ //
+ void fnloSuprocesses::ReadConfigFile(const std::string& config) {
+ fConfigFile = config;
+ this->resize(1000);
+ fInitialValues.resize(1000);
+ std::ifstream cf(config);
+ if ( !cf.is_open() ){
+ std::cerr<<"[fnloSubprocesses::ReadConfigFile()] Error. Could not open file: "<<config<< std::endl;
+ exit(2);
+ }
+ int id, np, v1, v2;
+ int nl = 0;
+ cf>>id; // first line is '0'
+ while ( !cf.eof() ) {
+ cf>>id>>np;
+ if(cf.fail()) break;
+ nl++;
+ //cout<<"nl: "<<nl<<"\tid="<<id<<"\tnp="<<np<< std::endl;
+ for ( int i = 0 ; i<np ; i++ ) {
+ cf>>v1>>v2;
+ //cout<<"\t"<<v1<<"\t"<<v2<< std::endl;
+ fInitialValues[id].push_back(v1);
+ fInitialValues[id].push_back(v2);
+ }
+ }
+ std::cout<<"[fnloSuprocesses::ReadConfigFile()] found "<<nl<<" subprocess definitions."<< std::endl;
+
+ SetUniqueValues();
+ }
+
+
+ // _____________________________________________________________________ //
+ bool fnloSuprocesses::CompareVectors(const std::vector<int>& v1, const std::vector<int>& v2 ) const {
+ //!< compare to vectors if all elements are equal
+ if ( v1.size() != v2.size() ) return false;
+ for ( unsigned int i=0 ; i<v1.size() ; i++ ) {
+ if ( v1[i] != v2[i] ) return false;
+ }
+ return true;
+ }
+
+
+ // _____________________________________________________________________ //
+ void fnloSuprocesses::SetUniqueValues() {
+ //!< init member SetUniqueValues and 'mother' vector
+ for ( unsigned int i = 0 ; i<fInitialValues.size() ; i++ ) {
+ if ( !fInitialValues[i].empty() ){
+ // look if values are already present ?
+ unsigned int umax = fUniqueValues.size();
+ for ( unsigned int u = 0 ; u <= umax ; u++ ) {
+ if ( u==fUniqueValues.size() ) fUniqueValues.push_back(fInitialValues[i]);
+ else if ( CompareVectors(fInitialValues[i],fUniqueValues[u]) ) break;
+ }
+ }
+ }
+
+ // sort a bit ?!
+ // put g-g to 0 if available
+ vector<int> gg(2);//{0,0}; gg -> X
+ for ( unsigned int u = 0 ; u < fUniqueValues.size() ; u++ ) {
+ if ( CompareVectors(gg,fUniqueValues[u])) {
+ std::swap(fUniqueValues[u],fUniqueValues[0]);
+ }
+ }
+ gg[1]=99;//{0,99}; // DIS eg -> X
+ for ( unsigned int u = 0 ; u < fUniqueValues.size() ; u++ ) {
+ if ( CompareVectors(gg,fUniqueValues[u])) {
+ std::swap(fUniqueValues[u],fUniqueValues[0]);
+ }
+ }
+
+ // define our map (which is actually a vector)
+ for ( unsigned int i = 0 ; i<fInitialValues.size() ; i++ ) {
+ (*this)[i] = -1; // init values
+ if ( !fInitialValues[i].empty() ){
+ for ( unsigned int u = 0 ; u < fUniqueValues.size() ; u++ ) {
+ if ( CompareVectors(fInitialValues[i],fUniqueValues[u]) )
+ (*this)[i] = u; // define our final map
+ }
+ }
+ }
+
+ std::cout<<"[fnloSuprocesses::SetUniqueValues()] found "<<fUniqueValues.size()<<" unique subprocess definitions."<<std::endl;
+ std::cout<<"[fnloSuprocesses::SetUniqueValues()] Initial values from config file:"<<std::endl;
+ for ( unsigned int i = 0 ; i<fInitialValues.size() ; i++ ) if ( fInitialValues[i].size()) std::cout<<i<<"\t"<<fInitialValues[i] << std::endl;
+ std::cout<<"[fnloSuprocesses::SetUniqueValues()] Processes definitions:"<<std::endl;
+ for ( unsigned int i = 0 ; i<fUniqueValues.size() ; i++ ) std::cout<<i<<"\t"<<fUniqueValues[i] << std::endl;
+ std::cout<<"[fnloSuprocesses::SetUniqueValues()] Mapping:"<<std::endl;
+ for ( unsigned int i = 0 ; i<fInitialValues.size() ; i++ ) if ( (*this)[i] > -1 ) std::cout<<i<<"\t"<<(*this)[i] << std::endl;
+ // std::cout<<"[fnloSuprocesses::SetUniqueValues()] Mapping: "<<(*this)<< std::endl<< std::endl;
+ }
+
+ // _____________________________________________________________________ //
+ std::vector<std::vector<int > > fnloSuprocesses::GetPartonCombinations() const {
+ auto out = fUniqueValues;
+ int n = 0;
+ for (auto& i : out ) i.emplace(i.begin(),n++);
+ //for ( auto& i : PartonCombinationsLO ) std::cout<<i<< std::endl;
+ return out;
+ }
+
+} // end namespace
+
+#endif
+
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/src/vecCache.h
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/src/vecCache.h (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/src/vecCache.h (revision 1772)
@@ -0,0 +1,126 @@
+// emacs: this is -*- c++ -*-
+//
+// @file vecCache.h
+//
+// convenient cache type, allows any number of different values of
+// observable for any give set of x1, x2, Q2, order
+//
+// Copyright (C) 2016 M.Sutton (sutt@cern.ch)
+//
+// $Id: vecCache.h, v0.0 Thu 14 Jul 2016 13:21:43 CEST sutt $
+
+
+#ifndef VECCACHE_H
+#define VECCACHE_H
+
+#include <iostream>
+#include <vector>
+#include <map>
+
+#include "nnlo_common.h"
+
+#include "imapCache.h"
+
+extern "C" int currentcacheid_();
+
+extern bool dbg;
+
+
+struct vecCache : public imapCache< std::vector< std::pair<double, std::vector<double> > > > {
+
+public:
+
+ vecCache( int nproc=0 ) : imapCache( nproc ) {
+ static bool first = true;
+ if ( first ) {
+ std::cout << "vecCache(): nproc: " << nproc << std::endl;
+ first = false;
+ }
+ }
+
+ virtual ~vecCache() { }
+
+
+ virtual std::vector<double>& weights( double obs ) {
+
+ /// do we have a weight vector for this observable ?
+
+ unsigned int id = currentcacheid_();
+
+ int iphase = iphase_.iphase;
+ int Nphase = nphase_.Nphase;
+
+ unsigned int myid = id*Nphase+(iphase-1);
+ // int myid = id;
+
+ // if ( dbg )
+ // std::cout << "cacheid " << id << "\tiphase " << iphase << "\tmyid " << myid << "\tobs " << obs << "\tsize " << size() << std::endl;
+
+ if ( myid<size() && at(myid).second.size()>0 ) {
+ iterator itr = begin() + myid;
+ // if ( dbg )
+ // if ( obs!=itr->first ) std::cout << "cacheid " << id << "\tiphase " << iphase << "\tmyid " << myid << "\tobs " << obs << "\tsize " << size() << "\tdifferent obs: obs " << obs << "\tcache obs " << itr->first << std::endl;
+ return itr->second;
+ }
+
+
+ if ( myid>=size() ) resize( myid+1 );
+
+ /// No? then create one and return that
+
+ // std::cout << "cahceid " << id << "\tiphase " << iphase << "\tmyid " << myid << "\tobs " << obs << "\tsize " << size() << " (resize cache vec)" << std::endl;
+
+ // if ( dbg )
+ // std::cout << "cacheid " << currentcacheid_() << "\tiphase " << iphase << "\tNphase " << Nphase << "\tobs " << obs << "\t(" << mx1 << " " << mx2 << " " << mQ2 << ") ";
+ // if ( dbg )
+ // std::cout << "myid " << myid << "\tsize " << size() << "\tadd pair: obs " << obs << std::endl;
+
+ at(myid) = std::make_pair( obs, std::vector<double>( mnproc, 0 ) );
+
+ return at(myid).second;
+ }
+
+
+
+ /// have any of the kinematic variables changed ?
+
+ virtual bool changed( double obs, int order, double x1, double x2, double Q2 ) {
+ //unsigned int id = currentcacheid_();
+ return ( mx1!=x1 || mx2!=x2 || mQ2!=Q2 || morder!=order ); // || ( id<size() && at(id).first!=obs ) );
+ }
+
+
+ /// update the cached kinematics
+
+ virtual void update( double obs, int order, double x1, double x2, double Q2 ) {
+
+ mfilled = true;
+
+ mx1 = x1;
+ mx2 = x2;
+ mQ2 = Q2;
+
+ morder = order;
+
+ clear();
+ }
+
+};
+
+inline std::ostream& operator<<( std::ostream& s, const vecCache& _p ) {
+ return s;
+}
+
+
+#endif // VECCACHE_H
+
+
+
+
+
+
+
+
+
+
+
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/src/ascache.cxx
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/src/ascache.cxx (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/src/ascache.cxx (revision 1772)
@@ -0,0 +1,60 @@
+//
+// @file ascache.cxx
+//
+//
+// @author M.Sutton
+//
+// Copyright (C) 2016 M.Sutton (sutt@cern.ch)
+//
+// $Id: ascache.cxx, v0.0 Tue 8 Nov 2016 11:16:30 CET sutt $
+
+
+
+#include "ascache.h"
+
+#include <cmath>
+#include <iostream>
+
+#include "nnlo_common.h"
+
+
+extern "C" double alphaspdf_( const double& Q );
+
+double leading_order_factor( int order, const double alphas ) {
+ if ( order==0 ) return 0;
+ double factor = 1;
+ for ( ; order-- ; ) factor *= 2*M_PI/alphas;
+ // std::cout << "leading order: factor: " << factor << "\talphas: " << alphas << std::endl;
+ return factor;
+}
+
+
+
+double ascache( const double Q2, const int order ) {
+
+ static double alphas_ = 0;
+ static double Q2_ = 0;
+
+ static int order_ = -1;
+ static double factor[4] = { 1, 1, 1, 1 };
+
+ static int leading = inppar_.njets;
+
+ if ( Q2!=Q2_ ) {
+ alphas_ = alphaspdf_( std::sqrt(Q2) );
+ order_ = -1;
+ Q2_ = Q2;
+ // std::cout << "ascache() recalculate alphas " << alphas_ << std::endl;
+ }
+
+ if ( order>order_ ) {
+ if ( order_==-1 ) factor[0] = leading_order_factor( leading, alphas_ );
+ for ( int i=order_+1 ; i<=order ; i++ ) factor[i+1] = factor[i]*2*M_PI/alphas_;
+ order_ = order;
+ // std::cout << "ascache() recalculate terms: order: " << order << "\tfactor: " << factor[order] << std::endl;
+ }
+
+ return factor[order];
+}
+
+
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/src/fillCache.h
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/src/fillCache.h (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/src/fillCache.h (revision 1772)
@@ -0,0 +1,161 @@
+// emacs: this is -*- c++ -*-
+//
+// @file fillCache.h
+//
+//
+//
+// Copyright (C) 2016 M.Sutton (sutt@cern.ch)
+//
+// $Id: fillCache.h, v0.0 Wed 24 Aug 2016 12:18:24 CEST sutt $
+
+
+#ifndef FILLCACHE_H
+#define FILLCACHE_H
+
+#include <iostream>
+
+
+#include "appl_grid/appl_grid.h"
+
+#include "mapCache.h"
+#include "vecCache.h"
+
+// typedef vecCache cache_t;
+// typedef mapCache cache_t;
+
+
+
+extern "C" bool getunitphase_();
+extern "C" int currentcacheid_();
+
+
+
+
+
+template<typename T>
+class fillCache {
+
+public:
+
+ typedef std::map<appl::grid*, T*> cache_t;
+
+public:
+
+ fillCache( bool warmup=false ) : mwarmup(warmup) { }
+
+ virtual ~fillCache() { }
+
+ // void fill( appl::grid* grid,
+ // int nproc, double obs, int order, int iprocess,
+ // double x1, double x2, double Q2,
+ // double fullweight );
+
+
+ T* findcache( appl::grid* gptr, int nproc=0 ) {
+
+ typename cache_t::iterator itr = mcachemap.find(gptr);
+ if ( itr!=mcachemap.end() ) return itr->second;
+
+ if ( nproc>0 ) {
+ // std::pair< std::map<appl::grid*, T*>::iterator, bool > status = mcachemap.insert( std::map<appl::grid*, T*>::value_type( gptr, new T( nproc ) ) );
+ std::pair< typename cache_t::iterator, bool > status = mcachemap.insert( typename cache_t::value_type( gptr, new T( nproc ) ) );
+ return status.first->second;
+ }
+
+ return 0;
+ }
+
+
+ void fill( appl::grid* grid,
+ int nproc, double obs, int order, int iprocess,
+ double x1, double x2, double Q2,
+ double fullweight ) {
+
+ cache_t* mpc = findcache( grid, nproc );
+
+ /// have the kinematics changed ?
+
+ bool mupdate = mpc->changed( obs, order, x1, x2, Q2 );
+
+ /// std::cout << "cache " << intproc << "\t " << iprocess << "\tmupdate: " << mupdate << "\tobs " << obs
+ // << "\tkin " << x1 << " " << x2 << " " << Q2 << "\twgt " << fullweight;// << std::endl;
+
+ /// if they have then flush the buffer and update the grid
+
+ // std::cout << "\tiprocess " << iprocess << "\tupdate: " << mupdate << "\tobs " << obs
+ // << "\t(" << x1 << " " << x2 << " " << Q2 << ")\twgt " << fullweight << std::endl;
+
+ if ( mupdate ) {
+
+ // if ( dbg ) std::cout << "\tiprocess " << iprocess << "\tupdate: " << mupdate << "\tobs " << obs << std::endl;
+
+ if ( mpc->filled() ){
+
+ /// if ( dbg ) std::cout << "\tflushing: mpc ";
+ /// if ( dbg ) std::cout << "cache size " << mpc->size() << std::endl;
+
+ typename cache_t::const_iterator itr = mpc->begin();
+ typename cache_t::const_iterator iend = mpc->end();
+ while( itr!=iend ) {
+ // std::cout << "\tflushing vector size " << itr->second.size() << std::endl;
+ if ( itr->second.size()==mpc->mnproc ) {
+ /// if ( dbg ) std::cout << "ix" << "\tflushing obs " << itr->first << std::endl;
+ if ( mwarmup ) grid->fill_phasespace( mpc->mx1, mpc->mx2, mpc->mQ2, itr->first, &itr->second[0], mpc->morder );
+ else grid->fill_grid( mpc->mx1, mpc->mx2, mpc->mQ2, itr->first, &itr->second[0], mpc->morder );
+ }
+ itr++;
+ }
+
+ }
+
+ mpc->update( obs, order, x1, x2, Q2 );
+
+ mcached = 0;
+
+ }
+
+ /// if ( dbg ) std::cout << std::endl;
+
+ /// update the cache with the new values
+
+ std::vector<double>& mwgt = mpc->weights( obs );
+
+ mwgt.at( iprocess ) += fullweight;
+
+ mcached++;
+
+ /// If ( dbg ) std::cout << "fill: " << mpc->weights( obs ) << std::endl;
+
+ }
+
+
+private:
+
+ bool mwarmup;
+
+ cache_t mcachemap;
+
+ // std::map<appl::grid*, T*> mcachemap;
+
+ int mcached = 0;
+
+};
+
+
+template<typename T>
+inline std::ostream& operator<<( std::ostream& s, const fillCache<T>& _f ) {
+ return s;
+}
+
+
+#endif // FILLCACHE_H
+
+
+
+
+
+
+
+
+
+
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/src/imapCache.h
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/src/imapCache.h (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/src/imapCache.h (revision 1772)
@@ -0,0 +1,108 @@
+// emacs: this is -*- c++ -*-
+//
+// @file imapCache.h
+//
+// interface to a convenient cache type, allows any number of
+// different values of observable for any give set of
+// x1, x2, Q2, order
+//
+// Copyright (C) 2016 M.Sutton (sutt@cern.ch)
+//
+// $Id: imapCache.h, v0.0 Thu 14 Jul 2016 13:21:43 CEST sutt $
+
+
+#ifndef IMAPCACHE_H
+#define IMAPCACHE_H
+
+#include <iostream>
+#include <vector>
+#include <map>
+
+
+extern "C" int currentcacheid_();
+
+template<typename T>
+class imapCache : public T {
+
+public:
+
+ /// convenient typedefs
+
+ // typedef std::map<double, std::vector<double> > map_t;
+ // typedef std::map<double, std::vector<double> >::iterator iterator;
+ // typedef std::map<double, std::vector<double> >::const_iterator const_iterator;
+
+ // typename T map_t;
+ // typename T::iterator iterator;
+ // typedef typename T::const_iterator const_iterator;
+
+public:
+
+ imapCache( int nproc=0 ) :
+ mx1(0), mx2(0), mQ2(0),
+ morder(0),
+ mnproc(nproc),
+ mfilled(false)
+ { }
+
+ virtual ~imapCache() { }
+
+ bool filled() const { return mfilled; }
+
+ void setnproc( int nproc ) { mnproc = nproc; }
+
+ /// "vector-like" operators
+
+ // size_t size() const { return this->size(); }
+ // void clear() { this->clear(); }
+
+ /// iterators
+ // iterator begin() { return this->begin(); }
+ // iterator end() { return this->end(); }
+
+ // const_iterator begin() const { return this->begin(); }
+ // const_iterator end() const { return this->end(); }
+
+
+
+ /// find the weight vector corresponding to this observable value
+ /// or else add a new one to this cache
+
+ virtual std::vector<double>& weights( double obs ) = 0;
+
+ /// have any of the kinematic variables changed ?
+
+ virtual bool changed( double obs, int order, double x1, double x2, double Q2 ) = 0;
+
+
+ /// update the cached kinematics
+
+ virtual void update( double obs, int order, double x1, double x2, double Q2 ) = 0;
+
+public:
+
+ double mx1, mx2, mQ2;
+ int morder;
+ int mnproc;
+
+ bool mfilled;
+
+};
+
+template<typename T>
+inline std::ostream& operator<<( std::ostream& s, const imapCache<T>& _p ) {
+ return s;
+}
+
+
+#endif // IMAPCACHE_H
+
+
+
+
+
+
+
+
+
+
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/depcomp
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/depcomp (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/depcomp (revision 1772)
@@ -0,0 +1,630 @@
+#! /bin/sh
+# depcomp - compile a program generating dependencies as side-effects
+
+scriptversion=2009-04-28.21; # UTC
+
+# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006, 2007, 2009 Free
+# Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# Originally written by Alexandre Oliva <oliva@dcc.unicamp.br>.
+
+case $1 in
+ '')
+ echo "$0: No command. Try \`$0 --help' for more information." 1>&2
+ exit 1;
+ ;;
+ -h | --h*)
+ cat <<\EOF
+Usage: depcomp [--help] [--version] PROGRAM [ARGS]
+
+Run PROGRAMS ARGS to compile a file, generating dependencies
+as side-effects.
+
+Environment variables:
+ depmode Dependency tracking mode.
+ source Source file read by `PROGRAMS ARGS'.
+ object Object file output by `PROGRAMS ARGS'.
+ DEPDIR directory where to store dependencies.
+ depfile Dependency file to output.
+ tmpdepfile Temporary file to use when outputing dependencies.
+ libtool Whether libtool is used (yes/no).
+
+Report bugs to <bug-automake@gnu.org>.
+EOF
+ exit $?
+ ;;
+ -v | --v*)
+ echo "depcomp $scriptversion"
+ exit $?
+ ;;
+esac
+
+if test -z "$depmode" || test -z "$source" || test -z "$object"; then
+ echo "depcomp: Variables source, object and depmode must be set" 1>&2
+ exit 1
+fi
+
+# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po.
+depfile=${depfile-`echo "$object" |
+ sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`}
+tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
+
+rm -f "$tmpdepfile"
+
+# Some modes work just like other modes, but use different flags. We
+# parameterize here, but still list the modes in the big case below,
+# to make depend.m4 easier to write. Note that we *cannot* use a case
+# here, because this file can only contain one case statement.
+if test "$depmode" = hp; then
+ # HP compiler uses -M and no extra arg.
+ gccflag=-M
+ depmode=gcc
+fi
+
+if test "$depmode" = dashXmstdout; then
+ # This is just like dashmstdout with a different argument.
+ dashmflag=-xM
+ depmode=dashmstdout
+fi
+
+cygpath_u="cygpath -u -f -"
+if test "$depmode" = msvcmsys; then
+ # This is just like msvisualcpp but w/o cygpath translation.
+ # Just convert the backslash-escaped backslashes to single forward
+ # slashes to satisfy depend.m4
+ cygpath_u="sed s,\\\\\\\\,/,g"
+ depmode=msvisualcpp
+fi
+
+case "$depmode" in
+gcc3)
+## gcc 3 implements dependency tracking that does exactly what
+## we want. Yay! Note: for some reason libtool 1.4 doesn't like
+## it if -MD -MP comes after the -MF stuff. Hmm.
+## Unfortunately, FreeBSD c89 acceptance of flags depends upon
+## the command line argument order; so add the flags where they
+## appear in depend2.am. Note that the slowdown incurred here
+## affects only configure: in makefiles, %FASTDEP% shortcuts this.
+ for arg
+ do
+ case $arg in
+ -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;;
+ *) set fnord "$@" "$arg" ;;
+ esac
+ shift # fnord
+ shift # $arg
+ done
+ "$@"
+ stat=$?
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile"
+ exit $stat
+ fi
+ mv "$tmpdepfile" "$depfile"
+ ;;
+
+gcc)
+## There are various ways to get dependency output from gcc. Here's
+## why we pick this rather obscure method:
+## - Don't want to use -MD because we'd like the dependencies to end
+## up in a subdir. Having to rename by hand is ugly.
+## (We might end up doing this anyway to support other compilers.)
+## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
+## -MM, not -M (despite what the docs say).
+## - Using -M directly means running the compiler twice (even worse
+## than renaming).
+ if test -z "$gccflag"; then
+ gccflag=-MD,
+ fi
+ "$@" -Wp,"$gccflag$tmpdepfile"
+ stat=$?
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile"
+ exit $stat
+ fi
+ rm -f "$depfile"
+ echo "$object : \\" > "$depfile"
+ alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
+## The second -e expression handles DOS-style file names with drive letters.
+ sed -e 's/^[^:]*: / /' \
+ -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
+## This next piece of magic avoids the `deleted header file' problem.
+## The problem is that when a header file which appears in a .P file
+## is deleted, the dependency causes make to die (because there is
+## typically no way to rebuild the header). We avoid this by adding
+## dummy dependencies for each header file. Too bad gcc doesn't do
+## this for us directly.
+ tr ' ' '
+' < "$tmpdepfile" |
+## Some versions of gcc put a space before the `:'. On the theory
+## that the space means something, we add a space to the output as
+## well.
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly. Breaking it into two sed invocations is a workaround.
+ sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+hp)
+ # This case exists only to let depend.m4 do its work. It works by
+ # looking at the text of this script. This case will never be run,
+ # since it is checked for above.
+ exit 1
+ ;;
+
+sgi)
+ if test "$libtool" = yes; then
+ "$@" "-Wp,-MDupdate,$tmpdepfile"
+ else
+ "$@" -MDupdate "$tmpdepfile"
+ fi
+ stat=$?
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile"
+ exit $stat
+ fi
+ rm -f "$depfile"
+
+ if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files
+ echo "$object : \\" > "$depfile"
+
+ # Clip off the initial element (the dependent). Don't try to be
+ # clever and replace this with sed code, as IRIX sed won't handle
+ # lines with more than a fixed number of characters (4096 in
+ # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines;
+ # the IRIX cc adds comments like `#:fec' to the end of the
+ # dependency line.
+ tr ' ' '
+' < "$tmpdepfile" \
+ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
+ tr '
+' ' ' >> "$depfile"
+ echo >> "$depfile"
+
+ # The second pass generates a dummy entry for each header file.
+ tr ' ' '
+' < "$tmpdepfile" \
+ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
+ >> "$depfile"
+ else
+ # The sourcefile does not contain any dependencies, so just
+ # store a dummy comment line, to avoid errors with the Makefile
+ # "include basename.Plo" scheme.
+ echo "#dummy" > "$depfile"
+ fi
+ rm -f "$tmpdepfile"
+ ;;
+
+aix)
+ # The C for AIX Compiler uses -M and outputs the dependencies
+ # in a .u file. In older versions, this file always lives in the
+ # current directory. Also, the AIX compiler puts `$object:' at the
+ # start of each line; $object doesn't have directory information.
+ # Version 6 uses the directory in both cases.
+ dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
+ test "x$dir" = "x$object" && dir=
+ base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
+ if test "$libtool" = yes; then
+ tmpdepfile1=$dir$base.u
+ tmpdepfile2=$base.u
+ tmpdepfile3=$dir.libs/$base.u
+ "$@" -Wc,-M
+ else
+ tmpdepfile1=$dir$base.u
+ tmpdepfile2=$dir$base.u
+ tmpdepfile3=$dir$base.u
+ "$@" -M
+ fi
+ stat=$?
+
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+ exit $stat
+ fi
+
+ for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+ do
+ test -f "$tmpdepfile" && break
+ done
+ if test -f "$tmpdepfile"; then
+ # Each line is of the form `foo.o: dependent.h'.
+ # Do two passes, one to just change these to
+ # `$object: dependent.h' and one to simply `dependent.h:'.
+ sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
+ # That's a tab and a space in the [].
+ sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
+ else
+ # The sourcefile does not contain any dependencies, so just
+ # store a dummy comment line, to avoid errors with the Makefile
+ # "include basename.Plo" scheme.
+ echo "#dummy" > "$depfile"
+ fi
+ rm -f "$tmpdepfile"
+ ;;
+
+icc)
+ # Intel's C compiler understands `-MD -MF file'. However on
+ # icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c
+ # ICC 7.0 will fill foo.d with something like
+ # foo.o: sub/foo.c
+ # foo.o: sub/foo.h
+ # which is wrong. We want:
+ # sub/foo.o: sub/foo.c
+ # sub/foo.o: sub/foo.h
+ # sub/foo.c:
+ # sub/foo.h:
+ # ICC 7.1 will output
+ # foo.o: sub/foo.c sub/foo.h
+ # and will wrap long lines using \ :
+ # foo.o: sub/foo.c ... \
+ # sub/foo.h ... \
+ # ...
+
+ "$@" -MD -MF "$tmpdepfile"
+ stat=$?
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile"
+ exit $stat
+ fi
+ rm -f "$depfile"
+ # Each line is of the form `foo.o: dependent.h',
+ # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'.
+ # Do two passes, one to just change these to
+ # `$object: dependent.h' and one to simply `dependent.h:'.
+ sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
+ # Some versions of the HPUX 10.20 sed can't process this invocation
+ # correctly. Breaking it into two sed invocations is a workaround.
+ sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" |
+ sed -e 's/$/ :/' >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+hp2)
+ # The "hp" stanza above does not work with aCC (C++) and HP's ia64
+ # compilers, which have integrated preprocessors. The correct option
+ # to use with these is +Maked; it writes dependencies to a file named
+ # 'foo.d', which lands next to the object file, wherever that
+ # happens to be.
+ # Much of this is similar to the tru64 case; see comments there.
+ dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
+ test "x$dir" = "x$object" && dir=
+ base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
+ if test "$libtool" = yes; then
+ tmpdepfile1=$dir$base.d
+ tmpdepfile2=$dir.libs/$base.d
+ "$@" -Wc,+Maked
+ else
+ tmpdepfile1=$dir$base.d
+ tmpdepfile2=$dir$base.d
+ "$@" +Maked
+ fi
+ stat=$?
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile1" "$tmpdepfile2"
+ exit $stat
+ fi
+
+ for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2"
+ do
+ test -f "$tmpdepfile" && break
+ done
+ if test -f "$tmpdepfile"; then
+ sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile"
+ # Add `dependent.h:' lines.
+ sed -ne '2,${
+ s/^ *//
+ s/ \\*$//
+ s/$/:/
+ p
+ }' "$tmpdepfile" >> "$depfile"
+ else
+ echo "#dummy" > "$depfile"
+ fi
+ rm -f "$tmpdepfile" "$tmpdepfile2"
+ ;;
+
+tru64)
+ # The Tru64 compiler uses -MD to generate dependencies as a side
+ # effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'.
+ # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
+ # dependencies in `foo.d' instead, so we check for that too.
+ # Subdirectories are respected.
+ dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
+ test "x$dir" = "x$object" && dir=
+ base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
+
+ if test "$libtool" = yes; then
+ # With Tru64 cc, shared objects can also be used to make a
+ # static library. This mechanism is used in libtool 1.4 series to
+ # handle both shared and static libraries in a single compilation.
+ # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d.
+ #
+ # With libtool 1.5 this exception was removed, and libtool now
+ # generates 2 separate objects for the 2 libraries. These two
+ # compilations output dependencies in $dir.libs/$base.o.d and
+ # in $dir$base.o.d. We have to check for both files, because
+ # one of the two compilations can be disabled. We should prefer
+ # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
+ # automatically cleaned when .libs/ is deleted, while ignoring
+ # the former would cause a distcleancheck panic.
+ tmpdepfile1=$dir.libs/$base.lo.d # libtool 1.4
+ tmpdepfile2=$dir$base.o.d # libtool 1.5
+ tmpdepfile3=$dir.libs/$base.o.d # libtool 1.5
+ tmpdepfile4=$dir.libs/$base.d # Compaq CCC V6.2-504
+ "$@" -Wc,-MD
+ else
+ tmpdepfile1=$dir$base.o.d
+ tmpdepfile2=$dir$base.d
+ tmpdepfile3=$dir$base.d
+ tmpdepfile4=$dir$base.d
+ "$@" -MD
+ fi
+
+ stat=$?
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
+ exit $stat
+ fi
+
+ for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
+ do
+ test -f "$tmpdepfile" && break
+ done
+ if test -f "$tmpdepfile"; then
+ sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
+ # That's a tab and a space in the [].
+ sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
+ else
+ echo "#dummy" > "$depfile"
+ fi
+ rm -f "$tmpdepfile"
+ ;;
+
+#nosideeffect)
+ # This comment above is used by automake to tell side-effect
+ # dependency tracking mechanisms from slower ones.
+
+dashmstdout)
+ # Important note: in order to support this mode, a compiler *must*
+ # always write the preprocessed file to stdout, regardless of -o.
+ "$@" || exit $?
+
+ # Remove the call to Libtool.
+ if test "$libtool" = yes; then
+ while test "X$1" != 'X--mode=compile'; do
+ shift
+ done
+ shift
+ fi
+
+ # Remove `-o $object'.
+ IFS=" "
+ for arg
+ do
+ case $arg in
+ -o)
+ shift
+ ;;
+ $object)
+ shift
+ ;;
+ *)
+ set fnord "$@" "$arg"
+ shift # fnord
+ shift # $arg
+ ;;
+ esac
+ done
+
+ test -z "$dashmflag" && dashmflag=-M
+ # Require at least two characters before searching for `:'
+ # in the target name. This is to cope with DOS-style filenames:
+ # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise.
+ "$@" $dashmflag |
+ sed 's:^[ ]*[^: ][^:][^:]*\:[ ]*:'"$object"'\: :' > "$tmpdepfile"
+ rm -f "$depfile"
+ cat < "$tmpdepfile" > "$depfile"
+ tr ' ' '
+' < "$tmpdepfile" | \
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly. Breaking it into two sed invocations is a workaround.
+ sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+dashXmstdout)
+ # This case only exists to satisfy depend.m4. It is never actually
+ # run, as this mode is specially recognized in the preamble.
+ exit 1
+ ;;
+
+makedepend)
+ "$@" || exit $?
+ # Remove any Libtool call
+ if test "$libtool" = yes; then
+ while test "X$1" != 'X--mode=compile'; do
+ shift
+ done
+ shift
+ fi
+ # X makedepend
+ shift
+ cleared=no eat=no
+ for arg
+ do
+ case $cleared in
+ no)
+ set ""; shift
+ cleared=yes ;;
+ esac
+ if test $eat = yes; then
+ eat=no
+ continue
+ fi
+ case "$arg" in
+ -D*|-I*)
+ set fnord "$@" "$arg"; shift ;;
+ # Strip any option that makedepend may not understand. Remove
+ # the object too, otherwise makedepend will parse it as a source file.
+ -arch)
+ eat=yes ;;
+ -*|$object)
+ ;;
+ *)
+ set fnord "$@" "$arg"; shift ;;
+ esac
+ done
+ obj_suffix=`echo "$object" | sed 's/^.*\././'`
+ touch "$tmpdepfile"
+ ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
+ rm -f "$depfile"
+ cat < "$tmpdepfile" > "$depfile"
+ sed '1,2d' "$tmpdepfile" | tr ' ' '
+' | \
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly. Breaking it into two sed invocations is a workaround.
+ sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+ rm -f "$tmpdepfile" "$tmpdepfile".bak
+ ;;
+
+cpp)
+ # Important note: in order to support this mode, a compiler *must*
+ # always write the preprocessed file to stdout.
+ "$@" || exit $?
+
+ # Remove the call to Libtool.
+ if test "$libtool" = yes; then
+ while test "X$1" != 'X--mode=compile'; do
+ shift
+ done
+ shift
+ fi
+
+ # Remove `-o $object'.
+ IFS=" "
+ for arg
+ do
+ case $arg in
+ -o)
+ shift
+ ;;
+ $object)
+ shift
+ ;;
+ *)
+ set fnord "$@" "$arg"
+ shift # fnord
+ shift # $arg
+ ;;
+ esac
+ done
+
+ "$@" -E |
+ sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
+ -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
+ sed '$ s: \\$::' > "$tmpdepfile"
+ rm -f "$depfile"
+ echo "$object : \\" > "$depfile"
+ cat < "$tmpdepfile" >> "$depfile"
+ sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+msvisualcpp)
+ # Important note: in order to support this mode, a compiler *must*
+ # always write the preprocessed file to stdout.
+ "$@" || exit $?
+
+ # Remove the call to Libtool.
+ if test "$libtool" = yes; then
+ while test "X$1" != 'X--mode=compile'; do
+ shift
+ done
+ shift
+ fi
+
+ IFS=" "
+ for arg
+ do
+ case "$arg" in
+ -o)
+ shift
+ ;;
+ $object)
+ shift
+ ;;
+ "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
+ set fnord "$@"
+ shift
+ shift
+ ;;
+ *)
+ set fnord "$@" "$arg"
+ shift
+ shift
+ ;;
+ esac
+ done
+ "$@" -E 2>/dev/null |
+ sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile"
+ rm -f "$depfile"
+ echo "$object : \\" > "$depfile"
+ sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile"
+ echo " " >> "$depfile"
+ sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+msvcmsys)
+ # This case exists only to let depend.m4 do its work. It works by
+ # looking at the text of this script. This case will never be run,
+ # since it is checked for above.
+ exit 1
+ ;;
+
+none)
+ exec "$@"
+ ;;
+
+*)
+ echo "Unknown depmode $depmode" 1>&2
+ exit 1
+ ;;
+esac
+
+exit 0
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
+# End:
Property changes on: nnlo-bridge/tags/nnlo-bridge-00-00-44/depcomp
___________________________________________________________________
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/amconfig.in
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/amconfig.in (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/amconfig.in (revision 1772)
@@ -0,0 +1,76 @@
+/* amconfig.in. Generated from configure.ac by autoheader. */
+
+/* Define 1 if applgrid is installed */
+#undef HAVE_APPL
+
+/* Define 1 if root is installed */
+#undef HAVE_CERNROOT
+
+/* Define to 1 if you have the <dlfcn.h> header file. */
+#undef HAVE_DLFCN_H
+
+/* Define 1 if fastnlo is installed */
+#undef HAVE_FASTNLO
+
+/* Define to 1 if you have the <inttypes.h> header file. */
+#undef HAVE_INTTYPES_H
+
+/* Define to 1 if you have the <memory.h> header file. */
+#undef HAVE_MEMORY_H
+
+/* Define to 1 if you have the <stdint.h> header file. */
+#undef HAVE_STDINT_H
+
+/* Define to 1 if you have the <stdlib.h> header file. */
+#undef HAVE_STDLIB_H
+
+/* Define to 1 if you have the <strings.h> header file. */
+#undef HAVE_STRINGS_H
+
+/* Define to 1 if you have the <string.h> header file. */
+#undef HAVE_STRING_H
+
+/* Define to 1 if you have the <sys/stat.h> header file. */
+#undef HAVE_SYS_STAT_H
+
+/* Define to 1 if you have the <sys/types.h> header file. */
+#undef HAVE_SYS_TYPES_H
+
+/* Define to 1 if you have the <unistd.h> header file. */
+#undef HAVE_UNISTD_H
+
+/* Define to 1 if you have the <utime.h> header file. */
+#undef HAVE_UTIME_H
+
+/* Define to 1 if `utime(file, NULL)' sets file's timestamp to the present. */
+#undef HAVE_UTIME_NULL
+
+/* Define to the sub-directory where libtool stores uninstalled libraries. */
+#undef LT_OBJDIR
+
+/* Name of package */
+#undef PACKAGE
+
+/* Define to the address where bug reports for this package should be sent. */
+#undef PACKAGE_BUGREPORT
+
+/* Define to the full name of this package. */
+#undef PACKAGE_NAME
+
+/* Define to the full name and version of this package. */
+#undef PACKAGE_STRING
+
+/* Define to the one symbol short name of this package. */
+#undef PACKAGE_TARNAME
+
+/* Define to the home page for this package. */
+#undef PACKAGE_URL
+
+/* Define to the version of this package. */
+#undef PACKAGE_VERSION
+
+/* Define to 1 if you have the ANSI C header files. */
+#undef STDC_HEADERS
+
+/* Version number of package */
+#undef VERSION
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/compile
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/compile (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/compile (revision 1772)
@@ -0,0 +1,347 @@
+#! /bin/sh
+# Wrapper for compilers which do not understand '-c -o'.
+
+scriptversion=2012-10-14.11; # UTC
+
+# Copyright (C) 1999-2014 Free Software Foundation, Inc.
+# Written by Tom Tromey <tromey@cygnus.com>.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# This file is maintained in Automake, please report
+# bugs to <bug-automake@gnu.org> or send patches to
+# <automake-patches@gnu.org>.
+
+nl='
+'
+
+# We need space, tab and new line, in precisely that order. Quoting is
+# there to prevent tools from complaining about whitespace usage.
+IFS=" "" $nl"
+
+file_conv=
+
+# func_file_conv build_file lazy
+# Convert a $build file to $host form and store it in $file
+# Currently only supports Windows hosts. If the determined conversion
+# type is listed in (the comma separated) LAZY, no conversion will
+# take place.
+func_file_conv ()
+{
+ file=$1
+ case $file in
+ / | /[!/]*) # absolute file, and not a UNC file
+ if test -z "$file_conv"; then
+ # lazily determine how to convert abs files
+ case `uname -s` in
+ MINGW*)
+ file_conv=mingw
+ ;;
+ CYGWIN*)
+ file_conv=cygwin
+ ;;
+ *)
+ file_conv=wine
+ ;;
+ esac
+ fi
+ case $file_conv/,$2, in
+ *,$file_conv,*)
+ ;;
+ mingw/*)
+ file=`cmd //C echo "$file " | sed -e 's/"\(.*\) " *$/\1/'`
+ ;;
+ cygwin/*)
+ file=`cygpath -m "$file" || echo "$file"`
+ ;;
+ wine/*)
+ file=`winepath -w "$file" || echo "$file"`
+ ;;
+ esac
+ ;;
+ esac
+}
+
+# func_cl_dashL linkdir
+# Make cl look for libraries in LINKDIR
+func_cl_dashL ()
+{
+ func_file_conv "$1"
+ if test -z "$lib_path"; then
+ lib_path=$file
+ else
+ lib_path="$lib_path;$file"
+ fi
+ linker_opts="$linker_opts -LIBPATH:$file"
+}
+
+# func_cl_dashl library
+# Do a library search-path lookup for cl
+func_cl_dashl ()
+{
+ lib=$1
+ found=no
+ save_IFS=$IFS
+ IFS=';'
+ for dir in $lib_path $LIB
+ do
+ IFS=$save_IFS
+ if $shared && test -f "$dir/$lib.dll.lib"; then
+ found=yes
+ lib=$dir/$lib.dll.lib
+ break
+ fi
+ if test -f "$dir/$lib.lib"; then
+ found=yes
+ lib=$dir/$lib.lib
+ break
+ fi
+ if test -f "$dir/lib$lib.a"; then
+ found=yes
+ lib=$dir/lib$lib.a
+ break
+ fi
+ done
+ IFS=$save_IFS
+
+ if test "$found" != yes; then
+ lib=$lib.lib
+ fi
+}
+
+# func_cl_wrapper cl arg...
+# Adjust compile command to suit cl
+func_cl_wrapper ()
+{
+ # Assume a capable shell
+ lib_path=
+ shared=:
+ linker_opts=
+ for arg
+ do
+ if test -n "$eat"; then
+ eat=
+ else
+ case $1 in
+ -o)
+ # configure might choose to run compile as 'compile cc -o foo foo.c'.
+ eat=1
+ case $2 in
+ *.o | *.[oO][bB][jJ])
+ func_file_conv "$2"
+ set x "$@" -Fo"$file"
+ shift
+ ;;
+ *)
+ func_file_conv "$2"
+ set x "$@" -Fe"$file"
+ shift
+ ;;
+ esac
+ ;;
+ -I)
+ eat=1
+ func_file_conv "$2" mingw
+ set x "$@" -I"$file"
+ shift
+ ;;
+ -I*)
+ func_file_conv "${1#-I}" mingw
+ set x "$@" -I"$file"
+ shift
+ ;;
+ -l)
+ eat=1
+ func_cl_dashl "$2"
+ set x "$@" "$lib"
+ shift
+ ;;
+ -l*)
+ func_cl_dashl "${1#-l}"
+ set x "$@" "$lib"
+ shift
+ ;;
+ -L)
+ eat=1
+ func_cl_dashL "$2"
+ ;;
+ -L*)
+ func_cl_dashL "${1#-L}"
+ ;;
+ -static)
+ shared=false
+ ;;
+ -Wl,*)
+ arg=${1#-Wl,}
+ save_ifs="$IFS"; IFS=','
+ for flag in $arg; do
+ IFS="$save_ifs"
+ linker_opts="$linker_opts $flag"
+ done
+ IFS="$save_ifs"
+ ;;
+ -Xlinker)
+ eat=1
+ linker_opts="$linker_opts $2"
+ ;;
+ -*)
+ set x "$@" "$1"
+ shift
+ ;;
+ *.cc | *.CC | *.cxx | *.CXX | *.[cC]++)
+ func_file_conv "$1"
+ set x "$@" -Tp"$file"
+ shift
+ ;;
+ *.c | *.cpp | *.CPP | *.lib | *.LIB | *.Lib | *.OBJ | *.obj | *.[oO])
+ func_file_conv "$1" mingw
+ set x "$@" "$file"
+ shift
+ ;;
+ *)
+ set x "$@" "$1"
+ shift
+ ;;
+ esac
+ fi
+ shift
+ done
+ if test -n "$linker_opts"; then
+ linker_opts="-link$linker_opts"
+ fi
+ exec "$@" $linker_opts
+ exit 1
+}
+
+eat=
+
+case $1 in
+ '')
+ echo "$0: No command. Try '$0 --help' for more information." 1>&2
+ exit 1;
+ ;;
+ -h | --h*)
+ cat <<\EOF
+Usage: compile [--help] [--version] PROGRAM [ARGS]
+
+Wrapper for compilers which do not understand '-c -o'.
+Remove '-o dest.o' from ARGS, run PROGRAM with the remaining
+arguments, and rename the output as expected.
+
+If you are trying to build a whole package this is not the
+right script to run: please start by reading the file 'INSTALL'.
+
+Report bugs to <bug-automake@gnu.org>.
+EOF
+ exit $?
+ ;;
+ -v | --v*)
+ echo "compile $scriptversion"
+ exit $?
+ ;;
+ cl | *[/\\]cl | cl.exe | *[/\\]cl.exe )
+ func_cl_wrapper "$@" # Doesn't return...
+ ;;
+esac
+
+ofile=
+cfile=
+
+for arg
+do
+ if test -n "$eat"; then
+ eat=
+ else
+ case $1 in
+ -o)
+ # configure might choose to run compile as 'compile cc -o foo foo.c'.
+ # So we strip '-o arg' only if arg is an object.
+ eat=1
+ case $2 in
+ *.o | *.obj)
+ ofile=$2
+ ;;
+ *)
+ set x "$@" -o "$2"
+ shift
+ ;;
+ esac
+ ;;
+ *.c)
+ cfile=$1
+ set x "$@" "$1"
+ shift
+ ;;
+ *)
+ set x "$@" "$1"
+ shift
+ ;;
+ esac
+ fi
+ shift
+done
+
+if test -z "$ofile" || test -z "$cfile"; then
+ # If no '-o' option was seen then we might have been invoked from a
+ # pattern rule where we don't need one. That is ok -- this is a
+ # normal compilation that the losing compiler can handle. If no
+ # '.c' file was seen then we are probably linking. That is also
+ # ok.
+ exec "$@"
+fi
+
+# Name of file we expect compiler to create.
+cofile=`echo "$cfile" | sed 's|^.*[\\/]||; s|^[a-zA-Z]:||; s/\.c$/.o/'`
+
+# Create the lock directory.
+# Note: use '[/\\:.-]' here to ensure that we don't use the same name
+# that we are using for the .o file. Also, base the name on the expected
+# object file name, since that is what matters with a parallel build.
+lockdir=`echo "$cofile" | sed -e 's|[/\\:.-]|_|g'`.d
+while true; do
+ if mkdir "$lockdir" >/dev/null 2>&1; then
+ break
+ fi
+ sleep 1
+done
+# FIXME: race condition here if user kills between mkdir and trap.
+trap "rmdir '$lockdir'; exit 1" 1 2 15
+
+# Run the compile.
+"$@"
+ret=$?
+
+if test -f "$cofile"; then
+ test "$cofile" = "$ofile" || mv "$cofile" "$ofile"
+elif test -f "${cofile}bj"; then
+ test "${cofile}bj" = "$ofile" || mv "${cofile}bj" "$ofile"
+fi
+
+rmdir "$lockdir"
+exit $ret
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
+# End:
Property changes on: nnlo-bridge/tags/nnlo-bridge-00-00-44/compile
___________________________________________________________________
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/config.guess
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/config.guess (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/config.guess (revision 1772)
@@ -0,0 +1,1501 @@
+#! /bin/sh
+# Attempt to guess a canonical system name.
+# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
+# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
+# Free Software Foundation, Inc.
+
+timestamp='2009-11-20'
+
+# This file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
+# 02110-1301, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+
+# Originally written by Per Bothner. Please send patches (context
+# diff format) to <config-patches@gnu.org> and include a ChangeLog
+# entry.
+#
+# This script attempts to guess a canonical system name similar to
+# config.sub. If it succeeds, it prints the system name on stdout, and
+# exits with 0. Otherwise, it exits with 1.
+#
+# You can get the latest version of this script from:
+# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD
+
+me=`echo "$0" | sed -e 's,.*/,,'`
+
+usage="\
+Usage: $0 [OPTION]
+
+Output the configuration name of the system \`$me' is run on.
+
+Operation modes:
+ -h, --help print this help, then exit
+ -t, --time-stamp print date of last modification, then exit
+ -v, --version print version number, then exit
+
+Report bugs and patches to <config-patches@gnu.org>."
+
+version="\
+GNU config.guess ($timestamp)
+
+Originally written by Per Bothner.
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001,
+2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+
+This is free software; see the source for copying conditions. There is NO
+warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
+
+help="
+Try \`$me --help' for more information."
+
+# Parse command line
+while test $# -gt 0 ; do
+ case $1 in
+ --time-stamp | --time* | -t )
+ echo "$timestamp" ; exit ;;
+ --version | -v )
+ echo "$version" ; exit ;;
+ --help | --h* | -h )
+ echo "$usage"; exit ;;
+ -- ) # Stop option processing
+ shift; break ;;
+ - ) # Use stdin as input.
+ break ;;
+ -* )
+ echo "$me: invalid option $1$help" >&2
+ exit 1 ;;
+ * )
+ break ;;
+ esac
+done
+
+if test $# != 0; then
+ echo "$me: too many arguments$help" >&2
+ exit 1
+fi
+
+trap 'exit 1' 1 2 15
+
+# CC_FOR_BUILD -- compiler used by this script. Note that the use of a
+# compiler to aid in system detection is discouraged as it requires
+# temporary files to be created and, as you can see below, it is a
+# headache to deal with in a portable fashion.
+
+# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still
+# use `HOST_CC' if defined, but it is deprecated.
+
+# Portable tmp directory creation inspired by the Autoconf team.
+
+set_cc_for_build='
+trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ;
+trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ;
+: ${TMPDIR=/tmp} ;
+ { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
+ { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } ||
+ { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } ||
+ { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ;
+dummy=$tmp/dummy ;
+tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ;
+case $CC_FOR_BUILD,$HOST_CC,$CC in
+ ,,) echo "int x;" > $dummy.c ;
+ for c in cc gcc c89 c99 ; do
+ if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then
+ CC_FOR_BUILD="$c"; break ;
+ fi ;
+ done ;
+ if test x"$CC_FOR_BUILD" = x ; then
+ CC_FOR_BUILD=no_compiler_found ;
+ fi
+ ;;
+ ,,*) CC_FOR_BUILD=$CC ;;
+ ,*,*) CC_FOR_BUILD=$HOST_CC ;;
+esac ; set_cc_for_build= ;'
+
+# This is needed to find uname on a Pyramid OSx when run in the BSD universe.
+# (ghazi@noc.rutgers.edu 1994-08-24)
+if (test -f /.attbin/uname) >/dev/null 2>&1 ; then
+ PATH=$PATH:/.attbin ; export PATH
+fi
+
+UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown
+UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
+UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown
+UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
+
+# Note: order is significant - the case branches are not exclusive.
+
+case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
+ *:NetBSD:*:*)
+ # NetBSD (nbsd) targets should (where applicable) match one or
+ # more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*,
+ # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently
+ # switched to ELF, *-*-netbsd* would select the old
+ # object file format. This provides both forward
+ # compatibility and a consistent mechanism for selecting the
+ # object file format.
+ #
+ # Note: NetBSD doesn't particularly care about the vendor
+ # portion of the name. We always set it to "unknown".
+ sysctl="sysctl -n hw.machine_arch"
+ UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \
+ /usr/sbin/$sysctl 2>/dev/null || echo unknown)`
+ case "${UNAME_MACHINE_ARCH}" in
+ armeb) machine=armeb-unknown ;;
+ arm*) machine=arm-unknown ;;
+ sh3el) machine=shl-unknown ;;
+ sh3eb) machine=sh-unknown ;;
+ sh5el) machine=sh5le-unknown ;;
+ *) machine=${UNAME_MACHINE_ARCH}-unknown ;;
+ esac
+ # The Operating System including object format, if it has switched
+ # to ELF recently, or will in the future.
+ case "${UNAME_MACHINE_ARCH}" in
+ arm*|i386|m68k|ns32k|sh3*|sparc|vax)
+ eval $set_cc_for_build
+ if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
+ | grep -q __ELF__
+ then
+ # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout).
+ # Return netbsd for either. FIX?
+ os=netbsd
+ else
+ os=netbsdelf
+ fi
+ ;;
+ *)
+ os=netbsd
+ ;;
+ esac
+ # The OS release
+ # Debian GNU/NetBSD machines have a different userland, and
+ # thus, need a distinct triplet. However, they do not need
+ # kernel version information, so it can be replaced with a
+ # suitable tag, in the style of linux-gnu.
+ case "${UNAME_VERSION}" in
+ Debian*)
+ release='-gnu'
+ ;;
+ *)
+ release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
+ ;;
+ esac
+ # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
+ # contains redundant information, the shorter form:
+ # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
+ echo "${machine}-${os}${release}"
+ exit ;;
+ *:OpenBSD:*:*)
+ UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'`
+ echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE}
+ exit ;;
+ *:ekkoBSD:*:*)
+ echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE}
+ exit ;;
+ *:SolidBSD:*:*)
+ echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE}
+ exit ;;
+ macppc:MirBSD:*:*)
+ echo powerpc-unknown-mirbsd${UNAME_RELEASE}
+ exit ;;
+ *:MirBSD:*:*)
+ echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE}
+ exit ;;
+ alpha:OSF1:*:*)
+ case $UNAME_RELEASE in
+ *4.0)
+ UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
+ ;;
+ *5.*)
+ UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'`
+ ;;
+ esac
+ # According to Compaq, /usr/sbin/psrinfo has been available on
+ # OSF/1 and Tru64 systems produced since 1995. I hope that
+ # covers most systems running today. This code pipes the CPU
+ # types through head -n 1, so we only detect the type of CPU 0.
+ ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1`
+ case "$ALPHA_CPU_TYPE" in
+ "EV4 (21064)")
+ UNAME_MACHINE="alpha" ;;
+ "EV4.5 (21064)")
+ UNAME_MACHINE="alpha" ;;
+ "LCA4 (21066/21068)")
+ UNAME_MACHINE="alpha" ;;
+ "EV5 (21164)")
+ UNAME_MACHINE="alphaev5" ;;
+ "EV5.6 (21164A)")
+ UNAME_MACHINE="alphaev56" ;;
+ "EV5.6 (21164PC)")
+ UNAME_MACHINE="alphapca56" ;;
+ "EV5.7 (21164PC)")
+ UNAME_MACHINE="alphapca57" ;;
+ "EV6 (21264)")
+ UNAME_MACHINE="alphaev6" ;;
+ "EV6.7 (21264A)")
+ UNAME_MACHINE="alphaev67" ;;
+ "EV6.8CB (21264C)")
+ UNAME_MACHINE="alphaev68" ;;
+ "EV6.8AL (21264B)")
+ UNAME_MACHINE="alphaev68" ;;
+ "EV6.8CX (21264D)")
+ UNAME_MACHINE="alphaev68" ;;
+ "EV6.9A (21264/EV69A)")
+ UNAME_MACHINE="alphaev69" ;;
+ "EV7 (21364)")
+ UNAME_MACHINE="alphaev7" ;;
+ "EV7.9 (21364A)")
+ UNAME_MACHINE="alphaev79" ;;
+ esac
+ # A Pn.n version is a patched version.
+ # A Vn.n version is a released version.
+ # A Tn.n version is a released field test version.
+ # A Xn.n version is an unreleased experimental baselevel.
+ # 1.2 uses "1.2" for uname -r.
+ echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+ exit ;;
+ Alpha\ *:Windows_NT*:*)
+ # How do we know it's Interix rather than the generic POSIX subsystem?
+ # Should we change UNAME_MACHINE based on the output of uname instead
+ # of the specific Alpha model?
+ echo alpha-pc-interix
+ exit ;;
+ 21064:Windows_NT:50:3)
+ echo alpha-dec-winnt3.5
+ exit ;;
+ Amiga*:UNIX_System_V:4.0:*)
+ echo m68k-unknown-sysv4
+ exit ;;
+ *:[Aa]miga[Oo][Ss]:*:*)
+ echo ${UNAME_MACHINE}-unknown-amigaos
+ exit ;;
+ *:[Mm]orph[Oo][Ss]:*:*)
+ echo ${UNAME_MACHINE}-unknown-morphos
+ exit ;;
+ *:OS/390:*:*)
+ echo i370-ibm-openedition
+ exit ;;
+ *:z/VM:*:*)
+ echo s390-ibm-zvmoe
+ exit ;;
+ *:OS400:*:*)
+ echo powerpc-ibm-os400
+ exit ;;
+ arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
+ echo arm-acorn-riscix${UNAME_RELEASE}
+ exit ;;
+ arm:riscos:*:*|arm:RISCOS:*:*)
+ echo arm-unknown-riscos
+ exit ;;
+ SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*)
+ echo hppa1.1-hitachi-hiuxmpp
+ exit ;;
+ Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*)
+ # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE.
+ if test "`(/bin/universe) 2>/dev/null`" = att ; then
+ echo pyramid-pyramid-sysv3
+ else
+ echo pyramid-pyramid-bsd
+ fi
+ exit ;;
+ NILE*:*:*:dcosx)
+ echo pyramid-pyramid-svr4
+ exit ;;
+ DRS?6000:unix:4.0:6*)
+ echo sparc-icl-nx6
+ exit ;;
+ DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*)
+ case `/usr/bin/uname -p` in
+ sparc) echo sparc-icl-nx7; exit ;;
+ esac ;;
+ s390x:SunOS:*:*)
+ echo ${UNAME_MACHINE}-ibm-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ exit ;;
+ sun4H:SunOS:5.*:*)
+ echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ exit ;;
+ sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
+ echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ exit ;;
+ i86pc:AuroraUX:5.*:* | i86xen:AuroraUX:5.*:*)
+ echo i386-pc-auroraux${UNAME_RELEASE}
+ exit ;;
+ i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*)
+ eval $set_cc_for_build
+ SUN_ARCH="i386"
+ # If there is a compiler, see if it is configured for 64-bit objects.
+ # Note that the Sun cc does not turn __LP64__ into 1 like gcc does.
+ # This test works for both compilers.
+ if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then
+ if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \
+ (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \
+ grep IS_64BIT_ARCH >/dev/null
+ then
+ SUN_ARCH="x86_64"
+ fi
+ fi
+ echo ${SUN_ARCH}-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ exit ;;
+ sun4*:SunOS:6*:*)
+ # According to config.sub, this is the proper way to canonicalize
+ # SunOS6. Hard to guess exactly what SunOS6 will be like, but
+ # it's likely to be more like Solaris than SunOS4.
+ echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ exit ;;
+ sun4*:SunOS:*:*)
+ case "`/usr/bin/arch -k`" in
+ Series*|S4*)
+ UNAME_RELEASE=`uname -v`
+ ;;
+ esac
+ # Japanese Language versions have a version number like `4.1.3-JL'.
+ echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'`
+ exit ;;
+ sun3*:SunOS:*:*)
+ echo m68k-sun-sunos${UNAME_RELEASE}
+ exit ;;
+ sun*:*:4.2BSD:*)
+ UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
+ test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
+ case "`/bin/arch`" in
+ sun3)
+ echo m68k-sun-sunos${UNAME_RELEASE}
+ ;;
+ sun4)
+ echo sparc-sun-sunos${UNAME_RELEASE}
+ ;;
+ esac
+ exit ;;
+ aushp:SunOS:*:*)
+ echo sparc-auspex-sunos${UNAME_RELEASE}
+ exit ;;
+ # The situation for MiNT is a little confusing. The machine name
+ # can be virtually everything (everything which is not
+ # "atarist" or "atariste" at least should have a processor
+ # > m68000). The system name ranges from "MiNT" over "FreeMiNT"
+ # to the lowercase version "mint" (or "freemint"). Finally
+ # the system name "TOS" denotes a system which is actually not
+ # MiNT. But MiNT is downward compatible to TOS, so this should
+ # be no problem.
+ atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
+ echo m68k-atari-mint${UNAME_RELEASE}
+ exit ;;
+ atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
+ echo m68k-atari-mint${UNAME_RELEASE}
+ exit ;;
+ *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
+ echo m68k-atari-mint${UNAME_RELEASE}
+ exit ;;
+ milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
+ echo m68k-milan-mint${UNAME_RELEASE}
+ exit ;;
+ hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
+ echo m68k-hades-mint${UNAME_RELEASE}
+ exit ;;
+ *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
+ echo m68k-unknown-mint${UNAME_RELEASE}
+ exit ;;
+ m68k:machten:*:*)
+ echo m68k-apple-machten${UNAME_RELEASE}
+ exit ;;
+ powerpc:machten:*:*)
+ echo powerpc-apple-machten${UNAME_RELEASE}
+ exit ;;
+ RISC*:Mach:*:*)
+ echo mips-dec-mach_bsd4.3
+ exit ;;
+ RISC*:ULTRIX:*:*)
+ echo mips-dec-ultrix${UNAME_RELEASE}
+ exit ;;
+ VAX*:ULTRIX*:*:*)
+ echo vax-dec-ultrix${UNAME_RELEASE}
+ exit ;;
+ 2020:CLIX:*:* | 2430:CLIX:*:*)
+ echo clipper-intergraph-clix${UNAME_RELEASE}
+ exit ;;
+ mips:*:*:UMIPS | mips:*:*:RISCos)
+ eval $set_cc_for_build
+ sed 's/^ //' << EOF >$dummy.c
+#ifdef __cplusplus
+#include <stdio.h> /* for printf() prototype */
+ int main (int argc, char *argv[]) {
+#else
+ int main (argc, argv) int argc; char *argv[]; {
+#endif
+ #if defined (host_mips) && defined (MIPSEB)
+ #if defined (SYSTYPE_SYSV)
+ printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0);
+ #endif
+ #if defined (SYSTYPE_SVR4)
+ printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0);
+ #endif
+ #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD)
+ printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0);
+ #endif
+ #endif
+ exit (-1);
+ }
+EOF
+ $CC_FOR_BUILD -o $dummy $dummy.c &&
+ dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` &&
+ SYSTEM_NAME=`$dummy $dummyarg` &&
+ { echo "$SYSTEM_NAME"; exit; }
+ echo mips-mips-riscos${UNAME_RELEASE}
+ exit ;;
+ Motorola:PowerMAX_OS:*:*)
+ echo powerpc-motorola-powermax
+ exit ;;
+ Motorola:*:4.3:PL8-*)
+ echo powerpc-harris-powermax
+ exit ;;
+ Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*)
+ echo powerpc-harris-powermax
+ exit ;;
+ Night_Hawk:Power_UNIX:*:*)
+ echo powerpc-harris-powerunix
+ exit ;;
+ m88k:CX/UX:7*:*)
+ echo m88k-harris-cxux7
+ exit ;;
+ m88k:*:4*:R4*)
+ echo m88k-motorola-sysv4
+ exit ;;
+ m88k:*:3*:R3*)
+ echo m88k-motorola-sysv3
+ exit ;;
+ AViiON:dgux:*:*)
+ # DG/UX returns AViiON for all architectures
+ UNAME_PROCESSOR=`/usr/bin/uname -p`
+ if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ]
+ then
+ if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \
+ [ ${TARGET_BINARY_INTERFACE}x = x ]
+ then
+ echo m88k-dg-dgux${UNAME_RELEASE}
+ else
+ echo m88k-dg-dguxbcs${UNAME_RELEASE}
+ fi
+ else
+ echo i586-dg-dgux${UNAME_RELEASE}
+ fi
+ exit ;;
+ M88*:DolphinOS:*:*) # DolphinOS (SVR3)
+ echo m88k-dolphin-sysv3
+ exit ;;
+ M88*:*:R3*:*)
+ # Delta 88k system running SVR3
+ echo m88k-motorola-sysv3
+ exit ;;
+ XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)
+ echo m88k-tektronix-sysv3
+ exit ;;
+ Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)
+ echo m68k-tektronix-bsd
+ exit ;;
+ *:IRIX*:*:*)
+ echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'`
+ exit ;;
+ ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
+ echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id
+ exit ;; # Note that: echo "'`uname -s`'" gives 'AIX '
+ i*86:AIX:*:*)
+ echo i386-ibm-aix
+ exit ;;
+ ia64:AIX:*:*)
+ if [ -x /usr/bin/oslevel ] ; then
+ IBM_REV=`/usr/bin/oslevel`
+ else
+ IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
+ fi
+ echo ${UNAME_MACHINE}-ibm-aix${IBM_REV}
+ exit ;;
+ *:AIX:2:3)
+ if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
+ eval $set_cc_for_build
+ sed 's/^ //' << EOF >$dummy.c
+ #include <sys/systemcfg.h>
+
+ main()
+ {
+ if (!__power_pc())
+ exit(1);
+ puts("powerpc-ibm-aix3.2.5");
+ exit(0);
+ }
+EOF
+ if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy`
+ then
+ echo "$SYSTEM_NAME"
+ else
+ echo rs6000-ibm-aix3.2.5
+ fi
+ elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
+ echo rs6000-ibm-aix3.2.4
+ else
+ echo rs6000-ibm-aix3.2
+ fi
+ exit ;;
+ *:AIX:*:[456])
+ IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
+ if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then
+ IBM_ARCH=rs6000
+ else
+ IBM_ARCH=powerpc
+ fi
+ if [ -x /usr/bin/oslevel ] ; then
+ IBM_REV=`/usr/bin/oslevel`
+ else
+ IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
+ fi
+ echo ${IBM_ARCH}-ibm-aix${IBM_REV}
+ exit ;;
+ *:AIX:*:*)
+ echo rs6000-ibm-aix
+ exit ;;
+ ibmrt:4.4BSD:*|romp-ibm:BSD:*)
+ echo romp-ibm-bsd4.4
+ exit ;;
+ ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and
+ echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to
+ exit ;; # report: romp-ibm BSD 4.3
+ *:BOSX:*:*)
+ echo rs6000-bull-bosx
+ exit ;;
+ DPX/2?00:B.O.S.:*:*)
+ echo m68k-bull-sysv3
+ exit ;;
+ 9000/[34]??:4.3bsd:1.*:*)
+ echo m68k-hp-bsd
+ exit ;;
+ hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
+ echo m68k-hp-bsd4.4
+ exit ;;
+ 9000/[34678]??:HP-UX:*:*)
+ HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
+ case "${UNAME_MACHINE}" in
+ 9000/31? ) HP_ARCH=m68000 ;;
+ 9000/[34]?? ) HP_ARCH=m68k ;;
+ 9000/[678][0-9][0-9])
+ if [ -x /usr/bin/getconf ]; then
+ sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null`
+ sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null`
+ case "${sc_cpu_version}" in
+ 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0
+ 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1
+ 532) # CPU_PA_RISC2_0
+ case "${sc_kernel_bits}" in
+ 32) HP_ARCH="hppa2.0n" ;;
+ 64) HP_ARCH="hppa2.0w" ;;
+ '') HP_ARCH="hppa2.0" ;; # HP-UX 10.20
+ esac ;;
+ esac
+ fi
+ if [ "${HP_ARCH}" = "" ]; then
+ eval $set_cc_for_build
+ sed 's/^ //' << EOF >$dummy.c
+
+ #define _HPUX_SOURCE
+ #include <stdlib.h>
+ #include <unistd.h>
+
+ int main ()
+ {
+ #if defined(_SC_KERNEL_BITS)
+ long bits = sysconf(_SC_KERNEL_BITS);
+ #endif
+ long cpu = sysconf (_SC_CPU_VERSION);
+
+ switch (cpu)
+ {
+ case CPU_PA_RISC1_0: puts ("hppa1.0"); break;
+ case CPU_PA_RISC1_1: puts ("hppa1.1"); break;
+ case CPU_PA_RISC2_0:
+ #if defined(_SC_KERNEL_BITS)
+ switch (bits)
+ {
+ case 64: puts ("hppa2.0w"); break;
+ case 32: puts ("hppa2.0n"); break;
+ default: puts ("hppa2.0"); break;
+ } break;
+ #else /* !defined(_SC_KERNEL_BITS) */
+ puts ("hppa2.0"); break;
+ #endif
+ default: puts ("hppa1.0"); break;
+ }
+ exit (0);
+ }
+EOF
+ (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy`
+ test -z "$HP_ARCH" && HP_ARCH=hppa
+ fi ;;
+ esac
+ if [ ${HP_ARCH} = "hppa2.0w" ]
+ then
+ eval $set_cc_for_build
+
+ # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating
+ # 32-bit code. hppa64-hp-hpux* has the same kernel and a compiler
+ # generating 64-bit code. GNU and HP use different nomenclature:
+ #
+ # $ CC_FOR_BUILD=cc ./config.guess
+ # => hppa2.0w-hp-hpux11.23
+ # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess
+ # => hppa64-hp-hpux11.23
+
+ if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) |
+ grep -q __LP64__
+ then
+ HP_ARCH="hppa2.0w"
+ else
+ HP_ARCH="hppa64"
+ fi
+ fi
+ echo ${HP_ARCH}-hp-hpux${HPUX_REV}
+ exit ;;
+ ia64:HP-UX:*:*)
+ HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
+ echo ia64-hp-hpux${HPUX_REV}
+ exit ;;
+ 3050*:HI-UX:*:*)
+ eval $set_cc_for_build
+ sed 's/^ //' << EOF >$dummy.c
+ #include <unistd.h>
+ int
+ main ()
+ {
+ long cpu = sysconf (_SC_CPU_VERSION);
+ /* The order matters, because CPU_IS_HP_MC68K erroneously returns
+ true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct
+ results, however. */
+ if (CPU_IS_PA_RISC (cpu))
+ {
+ switch (cpu)
+ {
+ case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break;
+ case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break;
+ case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break;
+ default: puts ("hppa-hitachi-hiuxwe2"); break;
+ }
+ }
+ else if (CPU_IS_HP_MC68K (cpu))
+ puts ("m68k-hitachi-hiuxwe2");
+ else puts ("unknown-hitachi-hiuxwe2");
+ exit (0);
+ }
+EOF
+ $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` &&
+ { echo "$SYSTEM_NAME"; exit; }
+ echo unknown-hitachi-hiuxwe2
+ exit ;;
+ 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* )
+ echo hppa1.1-hp-bsd
+ exit ;;
+ 9000/8??:4.3bsd:*:*)
+ echo hppa1.0-hp-bsd
+ exit ;;
+ *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*)
+ echo hppa1.0-hp-mpeix
+ exit ;;
+ hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* )
+ echo hppa1.1-hp-osf
+ exit ;;
+ hp8??:OSF1:*:*)
+ echo hppa1.0-hp-osf
+ exit ;;
+ i*86:OSF1:*:*)
+ if [ -x /usr/sbin/sysversion ] ; then
+ echo ${UNAME_MACHINE}-unknown-osf1mk
+ else
+ echo ${UNAME_MACHINE}-unknown-osf1
+ fi
+ exit ;;
+ parisc*:Lites*:*:*)
+ echo hppa1.1-hp-lites
+ exit ;;
+ C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
+ echo c1-convex-bsd
+ exit ;;
+ C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
+ if getsysinfo -f scalar_acc
+ then echo c32-convex-bsd
+ else echo c2-convex-bsd
+ fi
+ exit ;;
+ C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
+ echo c34-convex-bsd
+ exit ;;
+ C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
+ echo c38-convex-bsd
+ exit ;;
+ C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
+ echo c4-convex-bsd
+ exit ;;
+ CRAY*Y-MP:*:*:*)
+ echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+ exit ;;
+ CRAY*[A-Z]90:*:*:*)
+ echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \
+ | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
+ -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \
+ -e 's/\.[^.]*$/.X/'
+ exit ;;
+ CRAY*TS:*:*:*)
+ echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+ exit ;;
+ CRAY*T3E:*:*:*)
+ echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+ exit ;;
+ CRAY*SV1:*:*:*)
+ echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+ exit ;;
+ *:UNICOS/mp:*:*)
+ echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+ exit ;;
+ F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
+ FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+ FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
+ FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
+ echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
+ exit ;;
+ 5000:UNIX_System_V:4.*:*)
+ FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
+ FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'`
+ echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
+ exit ;;
+ i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
+ echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
+ exit ;;
+ sparc*:BSD/OS:*:*)
+ echo sparc-unknown-bsdi${UNAME_RELEASE}
+ exit ;;
+ *:BSD/OS:*:*)
+ echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
+ exit ;;
+ *:FreeBSD:*:*)
+ case ${UNAME_MACHINE} in
+ pc98)
+ echo i386-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
+ amd64)
+ echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
+ *)
+ echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
+ esac
+ exit ;;
+ i*:CYGWIN*:*)
+ echo ${UNAME_MACHINE}-pc-cygwin
+ exit ;;
+ *:MINGW*:*)
+ echo ${UNAME_MACHINE}-pc-mingw32
+ exit ;;
+ i*:windows32*:*)
+ # uname -m includes "-pc" on this system.
+ echo ${UNAME_MACHINE}-mingw32
+ exit ;;
+ i*:PW*:*)
+ echo ${UNAME_MACHINE}-pc-pw32
+ exit ;;
+ *:Interix*:*)
+ case ${UNAME_MACHINE} in
+ x86)
+ echo i586-pc-interix${UNAME_RELEASE}
+ exit ;;
+ authenticamd | genuineintel | EM64T)
+ echo x86_64-unknown-interix${UNAME_RELEASE}
+ exit ;;
+ IA64)
+ echo ia64-unknown-interix${UNAME_RELEASE}
+ exit ;;
+ esac ;;
+ [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*)
+ echo i${UNAME_MACHINE}-pc-mks
+ exit ;;
+ 8664:Windows_NT:*)
+ echo x86_64-pc-mks
+ exit ;;
+ i*:Windows_NT*:* | Pentium*:Windows_NT*:*)
+ # How do we know it's Interix rather than the generic POSIX subsystem?
+ # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we
+ # UNAME_MACHINE based on the output of uname instead of i386?
+ echo i586-pc-interix
+ exit ;;
+ i*:UWIN*:*)
+ echo ${UNAME_MACHINE}-pc-uwin
+ exit ;;
+ amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*)
+ echo x86_64-unknown-cygwin
+ exit ;;
+ p*:CYGWIN*:*)
+ echo powerpcle-unknown-cygwin
+ exit ;;
+ prep*:SunOS:5.*:*)
+ echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ exit ;;
+ *:GNU:*:*)
+ # the GNU system
+ echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
+ exit ;;
+ *:GNU/*:*:*)
+ # other systems with GNU libc and userland
+ echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu
+ exit ;;
+ i*86:Minix:*:*)
+ echo ${UNAME_MACHINE}-pc-minix
+ exit ;;
+ alpha:Linux:*:*)
+ case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
+ EV5) UNAME_MACHINE=alphaev5 ;;
+ EV56) UNAME_MACHINE=alphaev56 ;;
+ PCA56) UNAME_MACHINE=alphapca56 ;;
+ PCA57) UNAME_MACHINE=alphapca56 ;;
+ EV6) UNAME_MACHINE=alphaev6 ;;
+ EV67) UNAME_MACHINE=alphaev67 ;;
+ EV68*) UNAME_MACHINE=alphaev68 ;;
+ esac
+ objdump --private-headers /bin/sh | grep -q ld.so.1
+ if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi
+ echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC}
+ exit ;;
+ arm*:Linux:*:*)
+ eval $set_cc_for_build
+ if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \
+ | grep -q __ARM_EABI__
+ then
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ else
+ echo ${UNAME_MACHINE}-unknown-linux-gnueabi
+ fi
+ exit ;;
+ avr32*:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ exit ;;
+ cris:Linux:*:*)
+ echo cris-axis-linux-gnu
+ exit ;;
+ crisv32:Linux:*:*)
+ echo crisv32-axis-linux-gnu
+ exit ;;
+ frv:Linux:*:*)
+ echo frv-unknown-linux-gnu
+ exit ;;
+ i*86:Linux:*:*)
+ LIBC=gnu
+ eval $set_cc_for_build
+ sed 's/^ //' << EOF >$dummy.c
+ #ifdef __dietlibc__
+ LIBC=dietlibc
+ #endif
+EOF
+ eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^LIBC'`
+ echo "${UNAME_MACHINE}-pc-linux-${LIBC}"
+ exit ;;
+ ia64:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ exit ;;
+ m32r*:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ exit ;;
+ m68*:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ exit ;;
+ mips:Linux:*:* | mips64:Linux:*:*)
+ eval $set_cc_for_build
+ sed 's/^ //' << EOF >$dummy.c
+ #undef CPU
+ #undef ${UNAME_MACHINE}
+ #undef ${UNAME_MACHINE}el
+ #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
+ CPU=${UNAME_MACHINE}el
+ #else
+ #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
+ CPU=${UNAME_MACHINE}
+ #else
+ CPU=
+ #endif
+ #endif
+EOF
+ eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^CPU'`
+ test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
+ ;;
+ or32:Linux:*:*)
+ echo or32-unknown-linux-gnu
+ exit ;;
+ padre:Linux:*:*)
+ echo sparc-unknown-linux-gnu
+ exit ;;
+ parisc64:Linux:*:* | hppa64:Linux:*:*)
+ echo hppa64-unknown-linux-gnu
+ exit ;;
+ parisc:Linux:*:* | hppa:Linux:*:*)
+ # Look for CPU level
+ case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
+ PA7*) echo hppa1.1-unknown-linux-gnu ;;
+ PA8*) echo hppa2.0-unknown-linux-gnu ;;
+ *) echo hppa-unknown-linux-gnu ;;
+ esac
+ exit ;;
+ ppc64:Linux:*:*)
+ echo powerpc64-unknown-linux-gnu
+ exit ;;
+ ppc:Linux:*:*)
+ echo powerpc-unknown-linux-gnu
+ exit ;;
+ s390:Linux:*:* | s390x:Linux:*:*)
+ echo ${UNAME_MACHINE}-ibm-linux
+ exit ;;
+ sh64*:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ exit ;;
+ sh*:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ exit ;;
+ sparc:Linux:*:* | sparc64:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ exit ;;
+ vax:Linux:*:*)
+ echo ${UNAME_MACHINE}-dec-linux-gnu
+ exit ;;
+ x86_64:Linux:*:*)
+ echo x86_64-unknown-linux-gnu
+ exit ;;
+ xtensa*:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ exit ;;
+ i*86:DYNIX/ptx:4*:*)
+ # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.
+ # earlier versions are messed up and put the nodename in both
+ # sysname and nodename.
+ echo i386-sequent-sysv4
+ exit ;;
+ i*86:UNIX_SV:4.2MP:2.*)
+ # Unixware is an offshoot of SVR4, but it has its own version
+ # number series starting with 2...
+ # I am not positive that other SVR4 systems won't match this,
+ # I just have to hope. -- rms.
+ # Use sysv4.2uw... so that sysv4* matches it.
+ echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
+ exit ;;
+ i*86:OS/2:*:*)
+ # If we were able to find `uname', then EMX Unix compatibility
+ # is probably installed.
+ echo ${UNAME_MACHINE}-pc-os2-emx
+ exit ;;
+ i*86:XTS-300:*:STOP)
+ echo ${UNAME_MACHINE}-unknown-stop
+ exit ;;
+ i*86:atheos:*:*)
+ echo ${UNAME_MACHINE}-unknown-atheos
+ exit ;;
+ i*86:syllable:*:*)
+ echo ${UNAME_MACHINE}-pc-syllable
+ exit ;;
+ i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.[02]*:*)
+ echo i386-unknown-lynxos${UNAME_RELEASE}
+ exit ;;
+ i*86:*DOS:*:*)
+ echo ${UNAME_MACHINE}-pc-msdosdjgpp
+ exit ;;
+ i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*)
+ UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'`
+ if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
+ echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL}
+ else
+ echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL}
+ fi
+ exit ;;
+ i*86:*:5:[678]*)
+ # UnixWare 7.x, OpenUNIX and OpenServer 6.
+ case `/bin/uname -X | grep "^Machine"` in
+ *486*) UNAME_MACHINE=i486 ;;
+ *Pentium) UNAME_MACHINE=i586 ;;
+ *Pent*|*Celeron) UNAME_MACHINE=i686 ;;
+ esac
+ echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION}
+ exit ;;
+ i*86:*:3.2:*)
+ if test -f /usr/options/cb.name; then
+ UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
+ echo ${UNAME_MACHINE}-pc-isc$UNAME_REL
+ elif /bin/uname -X 2>/dev/null >/dev/null ; then
+ UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')`
+ (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486
+ (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \
+ && UNAME_MACHINE=i586
+ (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \
+ && UNAME_MACHINE=i686
+ (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \
+ && UNAME_MACHINE=i686
+ echo ${UNAME_MACHINE}-pc-sco$UNAME_REL
+ else
+ echo ${UNAME_MACHINE}-pc-sysv32
+ fi
+ exit ;;
+ pc:*:*:*)
+ # Left here for compatibility:
+ # uname -m prints for DJGPP always 'pc', but it prints nothing about
+ # the processor, so we play safe by assuming i586.
+ # Note: whatever this is, it MUST be the same as what config.sub
+ # prints for the "djgpp" host, or else GDB configury will decide that
+ # this is a cross-build.
+ echo i586-pc-msdosdjgpp
+ exit ;;
+ Intel:Mach:3*:*)
+ echo i386-pc-mach3
+ exit ;;
+ paragon:*:*:*)
+ echo i860-intel-osf1
+ exit ;;
+ i860:*:4.*:*) # i860-SVR4
+ if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then
+ echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4
+ else # Add other i860-SVR4 vendors below as they are discovered.
+ echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4
+ fi
+ exit ;;
+ mini*:CTIX:SYS*5:*)
+ # "miniframe"
+ echo m68010-convergent-sysv
+ exit ;;
+ mc68k:UNIX:SYSTEM5:3.51m)
+ echo m68k-convergent-sysv
+ exit ;;
+ M680?0:D-NIX:5.3:*)
+ echo m68k-diab-dnix
+ exit ;;
+ M68*:*:R3V[5678]*:*)
+ test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;;
+ 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0)
+ OS_REL=''
+ test -r /etc/.relid \
+ && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
+ /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+ && { echo i486-ncr-sysv4.3${OS_REL}; exit; }
+ /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
+ && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
+ 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
+ /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+ && { echo i486-ncr-sysv4; exit; } ;;
+ NCR*:*:4.2:* | MPRAS*:*:4.2:*)
+ OS_REL='.3'
+ test -r /etc/.relid \
+ && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
+ /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+ && { echo i486-ncr-sysv4.3${OS_REL}; exit; }
+ /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
+ && { echo i586-ncr-sysv4.3${OS_REL}; exit; }
+ /bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \
+ && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
+ m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*)
+ echo m68k-unknown-lynxos${UNAME_RELEASE}
+ exit ;;
+ mc68030:UNIX_System_V:4.*:*)
+ echo m68k-atari-sysv4
+ exit ;;
+ TSUNAMI:LynxOS:2.*:*)
+ echo sparc-unknown-lynxos${UNAME_RELEASE}
+ exit ;;
+ rs6000:LynxOS:2.*:*)
+ echo rs6000-unknown-lynxos${UNAME_RELEASE}
+ exit ;;
+ PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.[02]*:*)
+ echo powerpc-unknown-lynxos${UNAME_RELEASE}
+ exit ;;
+ SM[BE]S:UNIX_SV:*:*)
+ echo mips-dde-sysv${UNAME_RELEASE}
+ exit ;;
+ RM*:ReliantUNIX-*:*:*)
+ echo mips-sni-sysv4
+ exit ;;
+ RM*:SINIX-*:*:*)
+ echo mips-sni-sysv4
+ exit ;;
+ *:SINIX-*:*:*)
+ if uname -p 2>/dev/null >/dev/null ; then
+ UNAME_MACHINE=`(uname -p) 2>/dev/null`
+ echo ${UNAME_MACHINE}-sni-sysv4
+ else
+ echo ns32k-sni-sysv
+ fi
+ exit ;;
+ PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
+ # says <Richard.M.Bartel@ccMail.Census.GOV>
+ echo i586-unisys-sysv4
+ exit ;;
+ *:UNIX_System_V:4*:FTX*)
+ # From Gerald Hewes <hewes@openmarket.com>.
+ # How about differentiating between stratus architectures? -djm
+ echo hppa1.1-stratus-sysv4
+ exit ;;
+ *:*:*:FTX*)
+ # From seanf@swdc.stratus.com.
+ echo i860-stratus-sysv4
+ exit ;;
+ i*86:VOS:*:*)
+ # From Paul.Green@stratus.com.
+ echo ${UNAME_MACHINE}-stratus-vos
+ exit ;;
+ *:VOS:*:*)
+ # From Paul.Green@stratus.com.
+ echo hppa1.1-stratus-vos
+ exit ;;
+ mc68*:A/UX:*:*)
+ echo m68k-apple-aux${UNAME_RELEASE}
+ exit ;;
+ news*:NEWS-OS:6*:*)
+ echo mips-sony-newsos6
+ exit ;;
+ R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*)
+ if [ -d /usr/nec ]; then
+ echo mips-nec-sysv${UNAME_RELEASE}
+ else
+ echo mips-unknown-sysv${UNAME_RELEASE}
+ fi
+ exit ;;
+ BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only.
+ echo powerpc-be-beos
+ exit ;;
+ BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only.
+ echo powerpc-apple-beos
+ exit ;;
+ BePC:BeOS:*:*) # BeOS running on Intel PC compatible.
+ echo i586-pc-beos
+ exit ;;
+ BePC:Haiku:*:*) # Haiku running on Intel PC compatible.
+ echo i586-pc-haiku
+ exit ;;
+ SX-4:SUPER-UX:*:*)
+ echo sx4-nec-superux${UNAME_RELEASE}
+ exit ;;
+ SX-5:SUPER-UX:*:*)
+ echo sx5-nec-superux${UNAME_RELEASE}
+ exit ;;
+ SX-6:SUPER-UX:*:*)
+ echo sx6-nec-superux${UNAME_RELEASE}
+ exit ;;
+ SX-7:SUPER-UX:*:*)
+ echo sx7-nec-superux${UNAME_RELEASE}
+ exit ;;
+ SX-8:SUPER-UX:*:*)
+ echo sx8-nec-superux${UNAME_RELEASE}
+ exit ;;
+ SX-8R:SUPER-UX:*:*)
+ echo sx8r-nec-superux${UNAME_RELEASE}
+ exit ;;
+ Power*:Rhapsody:*:*)
+ echo powerpc-apple-rhapsody${UNAME_RELEASE}
+ exit ;;
+ *:Rhapsody:*:*)
+ echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE}
+ exit ;;
+ *:Darwin:*:*)
+ UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown
+ case $UNAME_PROCESSOR in
+ i386)
+ eval $set_cc_for_build
+ if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then
+ if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \
+ (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \
+ grep IS_64BIT_ARCH >/dev/null
+ then
+ UNAME_PROCESSOR="x86_64"
+ fi
+ fi ;;
+ unknown) UNAME_PROCESSOR=powerpc ;;
+ esac
+ echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE}
+ exit ;;
+ *:procnto*:*:* | *:QNX:[0123456789]*:*)
+ UNAME_PROCESSOR=`uname -p`
+ if test "$UNAME_PROCESSOR" = "x86"; then
+ UNAME_PROCESSOR=i386
+ UNAME_MACHINE=pc
+ fi
+ echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE}
+ exit ;;
+ *:QNX:*:4*)
+ echo i386-pc-qnx
+ exit ;;
+ NSE-?:NONSTOP_KERNEL:*:*)
+ echo nse-tandem-nsk${UNAME_RELEASE}
+ exit ;;
+ NSR-?:NONSTOP_KERNEL:*:*)
+ echo nsr-tandem-nsk${UNAME_RELEASE}
+ exit ;;
+ *:NonStop-UX:*:*)
+ echo mips-compaq-nonstopux
+ exit ;;
+ BS2000:POSIX*:*:*)
+ echo bs2000-siemens-sysv
+ exit ;;
+ DS/*:UNIX_System_V:*:*)
+ echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE}
+ exit ;;
+ *:Plan9:*:*)
+ # "uname -m" is not consistent, so use $cputype instead. 386
+ # is converted to i386 for consistency with other x86
+ # operating systems.
+ if test "$cputype" = "386"; then
+ UNAME_MACHINE=i386
+ else
+ UNAME_MACHINE="$cputype"
+ fi
+ echo ${UNAME_MACHINE}-unknown-plan9
+ exit ;;
+ *:TOPS-10:*:*)
+ echo pdp10-unknown-tops10
+ exit ;;
+ *:TENEX:*:*)
+ echo pdp10-unknown-tenex
+ exit ;;
+ KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*)
+ echo pdp10-dec-tops20
+ exit ;;
+ XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*)
+ echo pdp10-xkl-tops20
+ exit ;;
+ *:TOPS-20:*:*)
+ echo pdp10-unknown-tops20
+ exit ;;
+ *:ITS:*:*)
+ echo pdp10-unknown-its
+ exit ;;
+ SEI:*:*:SEIUX)
+ echo mips-sei-seiux${UNAME_RELEASE}
+ exit ;;
+ *:DragonFly:*:*)
+ echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
+ exit ;;
+ *:*VMS:*:*)
+ UNAME_MACHINE=`(uname -p) 2>/dev/null`
+ case "${UNAME_MACHINE}" in
+ A*) echo alpha-dec-vms ; exit ;;
+ I*) echo ia64-dec-vms ; exit ;;
+ V*) echo vax-dec-vms ; exit ;;
+ esac ;;
+ *:XENIX:*:SysV)
+ echo i386-pc-xenix
+ exit ;;
+ i*86:skyos:*:*)
+ echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//'
+ exit ;;
+ i*86:rdos:*:*)
+ echo ${UNAME_MACHINE}-pc-rdos
+ exit ;;
+ i*86:AROS:*:*)
+ echo ${UNAME_MACHINE}-pc-aros
+ exit ;;
+esac
+
+#echo '(No uname command or uname output not recognized.)' 1>&2
+#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2
+
+eval $set_cc_for_build
+cat >$dummy.c <<EOF
+#ifdef _SEQUENT_
+# include <sys/types.h>
+# include <sys/utsname.h>
+#endif
+main ()
+{
+#if defined (sony)
+#if defined (MIPSEB)
+ /* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed,
+ I don't know.... */
+ printf ("mips-sony-bsd\n"); exit (0);
+#else
+#include <sys/param.h>
+ printf ("m68k-sony-newsos%s\n",
+#ifdef NEWSOS4
+ "4"
+#else
+ ""
+#endif
+ ); exit (0);
+#endif
+#endif
+
+#if defined (__arm) && defined (__acorn) && defined (__unix)
+ printf ("arm-acorn-riscix\n"); exit (0);
+#endif
+
+#if defined (hp300) && !defined (hpux)
+ printf ("m68k-hp-bsd\n"); exit (0);
+#endif
+
+#if defined (NeXT)
+#if !defined (__ARCHITECTURE__)
+#define __ARCHITECTURE__ "m68k"
+#endif
+ int version;
+ version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`;
+ if (version < 4)
+ printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version);
+ else
+ printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version);
+ exit (0);
+#endif
+
+#if defined (MULTIMAX) || defined (n16)
+#if defined (UMAXV)
+ printf ("ns32k-encore-sysv\n"); exit (0);
+#else
+#if defined (CMU)
+ printf ("ns32k-encore-mach\n"); exit (0);
+#else
+ printf ("ns32k-encore-bsd\n"); exit (0);
+#endif
+#endif
+#endif
+
+#if defined (__386BSD__)
+ printf ("i386-pc-bsd\n"); exit (0);
+#endif
+
+#if defined (sequent)
+#if defined (i386)
+ printf ("i386-sequent-dynix\n"); exit (0);
+#endif
+#if defined (ns32000)
+ printf ("ns32k-sequent-dynix\n"); exit (0);
+#endif
+#endif
+
+#if defined (_SEQUENT_)
+ struct utsname un;
+
+ uname(&un);
+
+ if (strncmp(un.version, "V2", 2) == 0) {
+ printf ("i386-sequent-ptx2\n"); exit (0);
+ }
+ if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */
+ printf ("i386-sequent-ptx1\n"); exit (0);
+ }
+ printf ("i386-sequent-ptx\n"); exit (0);
+
+#endif
+
+#if defined (vax)
+# if !defined (ultrix)
+# include <sys/param.h>
+# if defined (BSD)
+# if BSD == 43
+ printf ("vax-dec-bsd4.3\n"); exit (0);
+# else
+# if BSD == 199006
+ printf ("vax-dec-bsd4.3reno\n"); exit (0);
+# else
+ printf ("vax-dec-bsd\n"); exit (0);
+# endif
+# endif
+# else
+ printf ("vax-dec-bsd\n"); exit (0);
+# endif
+# else
+ printf ("vax-dec-ultrix\n"); exit (0);
+# endif
+#endif
+
+#if defined (alliant) && defined (i860)
+ printf ("i860-alliant-bsd\n"); exit (0);
+#endif
+
+ exit (1);
+}
+EOF
+
+$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` &&
+ { echo "$SYSTEM_NAME"; exit; }
+
+# Apollos put the system type in the environment.
+
+test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; }
+
+# Convex versions that predate uname can use getsysinfo(1)
+
+if [ -x /usr/convex/getsysinfo ]
+then
+ case `getsysinfo -f cpu_type` in
+ c1*)
+ echo c1-convex-bsd
+ exit ;;
+ c2*)
+ if getsysinfo -f scalar_acc
+ then echo c32-convex-bsd
+ else echo c2-convex-bsd
+ fi
+ exit ;;
+ c34*)
+ echo c34-convex-bsd
+ exit ;;
+ c38*)
+ echo c38-convex-bsd
+ exit ;;
+ c4*)
+ echo c4-convex-bsd
+ exit ;;
+ esac
+fi
+
+cat >&2 <<EOF
+$0: unable to guess system type
+
+This script, last modified $timestamp, has failed to recognize
+the operating system you are using. It is advised that you
+download the most up to date version of the config scripts from
+
+ http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD
+and
+ http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD
+
+If the version you run ($0) is already up to date, please
+send the following data and any information you think might be
+pertinent to <config-patches@gnu.org> in order to provide the needed
+information to handle your system.
+
+config.guess timestamp = $timestamp
+
+uname -m = `(uname -m) 2>/dev/null || echo unknown`
+uname -r = `(uname -r) 2>/dev/null || echo unknown`
+uname -s = `(uname -s) 2>/dev/null || echo unknown`
+uname -v = `(uname -v) 2>/dev/null || echo unknown`
+
+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null`
+/bin/uname -X = `(/bin/uname -X) 2>/dev/null`
+
+hostinfo = `(hostinfo) 2>/dev/null`
+/bin/universe = `(/bin/universe) 2>/dev/null`
+/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null`
+/bin/arch = `(/bin/arch) 2>/dev/null`
+/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null`
+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null`
+
+UNAME_MACHINE = ${UNAME_MACHINE}
+UNAME_RELEASE = ${UNAME_RELEASE}
+UNAME_SYSTEM = ${UNAME_SYSTEM}
+UNAME_VERSION = ${UNAME_VERSION}
+EOF
+
+exit 1
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "timestamp='"
+# time-stamp-format: "%:y-%02m-%02d"
+# time-stamp-end: "'"
+# End:
Property changes on: nnlo-bridge/tags/nnlo-bridge-00-00-44/config.guess
___________________________________________________________________
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/ltmain.sh
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/ltmain.sh (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/ltmain.sh (revision 1772)
@@ -0,0 +1,9655 @@
+
+# libtool (GNU libtool) 2.4.2
+# Written by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006,
+# 2007, 2008, 2009, 2010, 2011 Free Software Foundation, Inc.
+# This is free software; see the source for copying conditions. There is NO
+# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+
+# GNU Libtool is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# As a special exception to the GNU General Public License,
+# if you distribute this file as part of a program or library that
+# is built using GNU Libtool, you may include this file under the
+# same distribution terms that you use for the rest of that program.
+#
+# GNU Libtool is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING. If not, a copy
+# can be downloaded from http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+
+# Usage: $progname [OPTION]... [MODE-ARG]...
+#
+# Provide generalized library-building support services.
+#
+# --config show all configuration variables
+# --debug enable verbose shell tracing
+# -n, --dry-run display commands without modifying any files
+# --features display basic configuration information and exit
+# --mode=MODE use operation mode MODE
+# --preserve-dup-deps don't remove duplicate dependency libraries
+# --quiet, --silent don't print informational messages
+# --no-quiet, --no-silent
+# print informational messages (default)
+# --no-warn don't display warning messages
+# --tag=TAG use configuration variables from tag TAG
+# -v, --verbose print more informational messages than default
+# --no-verbose don't print the extra informational messages
+# --version print version information
+# -h, --help, --help-all print short, long, or detailed help message
+#
+# MODE must be one of the following:
+#
+# clean remove files from the build directory
+# compile compile a source file into a libtool object
+# execute automatically set library path, then run a program
+# finish complete the installation of libtool libraries
+# install install libraries or executables
+# link create a library or an executable
+# uninstall remove libraries from an installed directory
+#
+# MODE-ARGS vary depending on the MODE. When passed as first option,
+# `--mode=MODE' may be abbreviated as `MODE' or a unique abbreviation of that.
+# Try `$progname --help --mode=MODE' for a more detailed description of MODE.
+#
+# When reporting a bug, please describe a test case to reproduce it and
+# include the following information:
+#
+# host-triplet: $host
+# shell: $SHELL
+# compiler: $LTCC
+# compiler flags: $LTCFLAGS
+# linker: $LD (gnu? $with_gnu_ld)
+# $progname: (GNU libtool) 2.4.2
+# automake: $automake_version
+# autoconf: $autoconf_version
+#
+# Report bugs to <bug-libtool@gnu.org>.
+# GNU libtool home page: <http://www.gnu.org/software/libtool/>.
+# General help using GNU software: <http://www.gnu.org/gethelp/>.
+
+PROGRAM=libtool
+PACKAGE=libtool
+VERSION=2.4.2
+TIMESTAMP=""
+package_revision=1.3337
+
+# Be Bourne compatible
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+ emulate sh
+ NULLCMD=:
+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '${1+"$@"}'='"$@"'
+ setopt NO_GLOB_SUBST
+else
+ case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
+fi
+BIN_SH=xpg4; export BIN_SH # for Tru64
+DUALCASE=1; export DUALCASE # for MKS sh
+
+# A function that is used when there is no print builtin or printf.
+func_fallback_echo ()
+{
+ eval 'cat <<_LTECHO_EOF
+$1
+_LTECHO_EOF'
+}
+
+# NLS nuisances: We save the old values to restore during execute mode.
+lt_user_locale=
+lt_safe_locale=
+for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
+do
+ eval "if test \"\${$lt_var+set}\" = set; then
+ save_$lt_var=\$$lt_var
+ $lt_var=C
+ export $lt_var
+ lt_user_locale=\"$lt_var=\\\$save_\$lt_var; \$lt_user_locale\"
+ lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\"
+ fi"
+done
+LC_ALL=C
+LANGUAGE=C
+export LANGUAGE LC_ALL
+
+$lt_unset CDPATH
+
+
+# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
+# is ksh but when the shell is invoked as "sh" and the current value of
+# the _XPG environment variable is not equal to 1 (one), the special
+# positional parameter $0, within a function call, is the name of the
+# function.
+progpath="$0"
+
+
+
+: ${CP="cp -f"}
+test "${ECHO+set}" = set || ECHO=${as_echo-'printf %s\n'}
+: ${MAKE="make"}
+: ${MKDIR="mkdir"}
+: ${MV="mv -f"}
+: ${RM="rm -f"}
+: ${SHELL="${CONFIG_SHELL-/bin/sh}"}
+: ${Xsed="$SED -e 1s/^X//"}
+
+# Global variables:
+EXIT_SUCCESS=0
+EXIT_FAILURE=1
+EXIT_MISMATCH=63 # $? = 63 is used to indicate version mismatch to missing.
+EXIT_SKIP=77 # $? = 77 is used to indicate a skipped test to automake.
+
+exit_status=$EXIT_SUCCESS
+
+# Make sure IFS has a sensible default
+lt_nl='
+'
+IFS=" $lt_nl"
+
+dirname="s,/[^/]*$,,"
+basename="s,^.*/,,"
+
+# func_dirname file append nondir_replacement
+# Compute the dirname of FILE. If nonempty, add APPEND to the result,
+# otherwise set result to NONDIR_REPLACEMENT.
+func_dirname ()
+{
+ func_dirname_result=`$ECHO "${1}" | $SED "$dirname"`
+ if test "X$func_dirname_result" = "X${1}"; then
+ func_dirname_result="${3}"
+ else
+ func_dirname_result="$func_dirname_result${2}"
+ fi
+} # func_dirname may be replaced by extended shell implementation
+
+
+# func_basename file
+func_basename ()
+{
+ func_basename_result=`$ECHO "${1}" | $SED "$basename"`
+} # func_basename may be replaced by extended shell implementation
+
+
+# func_dirname_and_basename file append nondir_replacement
+# perform func_basename and func_dirname in a single function
+# call:
+# dirname: Compute the dirname of FILE. If nonempty,
+# add APPEND to the result, otherwise set result
+# to NONDIR_REPLACEMENT.
+# value returned in "$func_dirname_result"
+# basename: Compute filename of FILE.
+# value retuned in "$func_basename_result"
+# Implementation must be kept synchronized with func_dirname
+# and func_basename. For efficiency, we do not delegate to
+# those functions but instead duplicate the functionality here.
+func_dirname_and_basename ()
+{
+ # Extract subdirectory from the argument.
+ func_dirname_result=`$ECHO "${1}" | $SED -e "$dirname"`
+ if test "X$func_dirname_result" = "X${1}"; then
+ func_dirname_result="${3}"
+ else
+ func_dirname_result="$func_dirname_result${2}"
+ fi
+ func_basename_result=`$ECHO "${1}" | $SED -e "$basename"`
+} # func_dirname_and_basename may be replaced by extended shell implementation
+
+
+# func_stripname prefix suffix name
+# strip PREFIX and SUFFIX off of NAME.
+# PREFIX and SUFFIX must not contain globbing or regex special
+# characters, hashes, percent signs, but SUFFIX may contain a leading
+# dot (in which case that matches only a dot).
+# func_strip_suffix prefix name
+func_stripname ()
+{
+ case ${2} in
+ .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;;
+ *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;;
+ esac
+} # func_stripname may be replaced by extended shell implementation
+
+
+# These SED scripts presuppose an absolute path with a trailing slash.
+pathcar='s,^/\([^/]*\).*$,\1,'
+pathcdr='s,^/[^/]*,,'
+removedotparts=':dotsl
+ s@/\./@/@g
+ t dotsl
+ s,/\.$,/,'
+collapseslashes='s@/\{1,\}@/@g'
+finalslash='s,/*$,/,'
+
+# func_normal_abspath PATH
+# Remove doubled-up and trailing slashes, "." path components,
+# and cancel out any ".." path components in PATH after making
+# it an absolute path.
+# value returned in "$func_normal_abspath_result"
+func_normal_abspath ()
+{
+ # Start from root dir and reassemble the path.
+ func_normal_abspath_result=
+ func_normal_abspath_tpath=$1
+ func_normal_abspath_altnamespace=
+ case $func_normal_abspath_tpath in
+ "")
+ # Empty path, that just means $cwd.
+ func_stripname '' '/' "`pwd`"
+ func_normal_abspath_result=$func_stripname_result
+ return
+ ;;
+ # The next three entries are used to spot a run of precisely
+ # two leading slashes without using negated character classes;
+ # we take advantage of case's first-match behaviour.
+ ///*)
+ # Unusual form of absolute path, do nothing.
+ ;;
+ //*)
+ # Not necessarily an ordinary path; POSIX reserves leading '//'
+ # and for example Cygwin uses it to access remote file shares
+ # over CIFS/SMB, so we conserve a leading double slash if found.
+ func_normal_abspath_altnamespace=/
+ ;;
+ /*)
+ # Absolute path, do nothing.
+ ;;
+ *)
+ # Relative path, prepend $cwd.
+ func_normal_abspath_tpath=`pwd`/$func_normal_abspath_tpath
+ ;;
+ esac
+ # Cancel out all the simple stuff to save iterations. We also want
+ # the path to end with a slash for ease of parsing, so make sure
+ # there is one (and only one) here.
+ func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
+ -e "$removedotparts" -e "$collapseslashes" -e "$finalslash"`
+ while :; do
+ # Processed it all yet?
+ if test "$func_normal_abspath_tpath" = / ; then
+ # If we ascended to the root using ".." the result may be empty now.
+ if test -z "$func_normal_abspath_result" ; then
+ func_normal_abspath_result=/
+ fi
+ break
+ fi
+ func_normal_abspath_tcomponent=`$ECHO "$func_normal_abspath_tpath" | $SED \
+ -e "$pathcar"`
+ func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
+ -e "$pathcdr"`
+ # Figure out what to do with it
+ case $func_normal_abspath_tcomponent in
+ "")
+ # Trailing empty path component, ignore it.
+ ;;
+ ..)
+ # Parent dir; strip last assembled component from result.
+ func_dirname "$func_normal_abspath_result"
+ func_normal_abspath_result=$func_dirname_result
+ ;;
+ *)
+ # Actual path component, append it.
+ func_normal_abspath_result=$func_normal_abspath_result/$func_normal_abspath_tcomponent
+ ;;
+ esac
+ done
+ # Restore leading double-slash if one was found on entry.
+ func_normal_abspath_result=$func_normal_abspath_altnamespace$func_normal_abspath_result
+}
+
+# func_relative_path SRCDIR DSTDIR
+# generates a relative path from SRCDIR to DSTDIR, with a trailing
+# slash if non-empty, suitable for immediately appending a filename
+# without needing to append a separator.
+# value returned in "$func_relative_path_result"
+func_relative_path ()
+{
+ func_relative_path_result=
+ func_normal_abspath "$1"
+ func_relative_path_tlibdir=$func_normal_abspath_result
+ func_normal_abspath "$2"
+ func_relative_path_tbindir=$func_normal_abspath_result
+
+ # Ascend the tree starting from libdir
+ while :; do
+ # check if we have found a prefix of bindir
+ case $func_relative_path_tbindir in
+ $func_relative_path_tlibdir)
+ # found an exact match
+ func_relative_path_tcancelled=
+ break
+ ;;
+ $func_relative_path_tlibdir*)
+ # found a matching prefix
+ func_stripname "$func_relative_path_tlibdir" '' "$func_relative_path_tbindir"
+ func_relative_path_tcancelled=$func_stripname_result
+ if test -z "$func_relative_path_result"; then
+ func_relative_path_result=.
+ fi
+ break
+ ;;
+ *)
+ func_dirname $func_relative_path_tlibdir
+ func_relative_path_tlibdir=${func_dirname_result}
+ if test "x$func_relative_path_tlibdir" = x ; then
+ # Have to descend all the way to the root!
+ func_relative_path_result=../$func_relative_path_result
+ func_relative_path_tcancelled=$func_relative_path_tbindir
+ break
+ fi
+ func_relative_path_result=../$func_relative_path_result
+ ;;
+ esac
+ done
+
+ # Now calculate path; take care to avoid doubling-up slashes.
+ func_stripname '' '/' "$func_relative_path_result"
+ func_relative_path_result=$func_stripname_result
+ func_stripname '/' '/' "$func_relative_path_tcancelled"
+ if test "x$func_stripname_result" != x ; then
+ func_relative_path_result=${func_relative_path_result}/${func_stripname_result}
+ fi
+
+ # Normalisation. If bindir is libdir, return empty string,
+ # else relative path ending with a slash; either way, target
+ # file name can be directly appended.
+ if test ! -z "$func_relative_path_result"; then
+ func_stripname './' '' "$func_relative_path_result/"
+ func_relative_path_result=$func_stripname_result
+ fi
+}
+
+# The name of this program:
+func_dirname_and_basename "$progpath"
+progname=$func_basename_result
+
+# Make sure we have an absolute path for reexecution:
+case $progpath in
+ [\\/]*|[A-Za-z]:\\*) ;;
+ *[\\/]*)
+ progdir=$func_dirname_result
+ progdir=`cd "$progdir" && pwd`
+ progpath="$progdir/$progname"
+ ;;
+ *)
+ save_IFS="$IFS"
+ IFS=${PATH_SEPARATOR-:}
+ for progdir in $PATH; do
+ IFS="$save_IFS"
+ test -x "$progdir/$progname" && break
+ done
+ IFS="$save_IFS"
+ test -n "$progdir" || progdir=`pwd`
+ progpath="$progdir/$progname"
+ ;;
+esac
+
+# Sed substitution that helps us do robust quoting. It backslashifies
+# metacharacters that are still active within double-quoted strings.
+Xsed="${SED}"' -e 1s/^X//'
+sed_quote_subst='s/\([`"$\\]\)/\\\1/g'
+
+# Same as above, but do not quote variable references.
+double_quote_subst='s/\(["`\\]\)/\\\1/g'
+
+# Sed substitution that turns a string into a regex matching for the
+# string literally.
+sed_make_literal_regex='s,[].[^$\\*\/],\\&,g'
+
+# Sed substitution that converts a w32 file name or path
+# which contains forward slashes, into one that contains
+# (escaped) backslashes. A very naive implementation.
+lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
+
+# Re-`\' parameter expansions in output of double_quote_subst that were
+# `\'-ed in input to the same. If an odd number of `\' preceded a '$'
+# in input to double_quote_subst, that '$' was protected from expansion.
+# Since each input `\' is now two `\'s, look for any number of runs of
+# four `\'s followed by two `\'s and then a '$'. `\' that '$'.
+bs='\\'
+bs2='\\\\'
+bs4='\\\\\\\\'
+dollar='\$'
+sed_double_backslash="\
+ s/$bs4/&\\
+/g
+ s/^$bs2$dollar/$bs&/
+ s/\\([^$bs]\\)$bs2$dollar/\\1$bs2$bs$dollar/g
+ s/\n//g"
+
+# Standard options:
+opt_dry_run=false
+opt_help=false
+opt_quiet=false
+opt_verbose=false
+opt_warning=:
+
+# func_echo arg...
+# Echo program name prefixed message, along with the current mode
+# name if it has been set yet.
+func_echo ()
+{
+ $ECHO "$progname: ${opt_mode+$opt_mode: }$*"
+}
+
+# func_verbose arg...
+# Echo program name prefixed message in verbose mode only.
+func_verbose ()
+{
+ $opt_verbose && func_echo ${1+"$@"}
+
+ # A bug in bash halts the script if the last line of a function
+ # fails when set -e is in force, so we need another command to
+ # work around that:
+ :
+}
+
+# func_echo_all arg...
+# Invoke $ECHO with all args, space-separated.
+func_echo_all ()
+{
+ $ECHO "$*"
+}
+
+# func_error arg...
+# Echo program name prefixed message to standard error.
+func_error ()
+{
+ $ECHO "$progname: ${opt_mode+$opt_mode: }"${1+"$@"} 1>&2
+}
+
+# func_warning arg...
+# Echo program name prefixed warning message to standard error.
+func_warning ()
+{
+ $opt_warning && $ECHO "$progname: ${opt_mode+$opt_mode: }warning: "${1+"$@"} 1>&2
+
+ # bash bug again:
+ :
+}
+
+# func_fatal_error arg...
+# Echo program name prefixed message to standard error, and exit.
+func_fatal_error ()
+{
+ func_error ${1+"$@"}
+ exit $EXIT_FAILURE
+}
+
+# func_fatal_help arg...
+# Echo program name prefixed message to standard error, followed by
+# a help hint, and exit.
+func_fatal_help ()
+{
+ func_error ${1+"$@"}
+ func_fatal_error "$help"
+}
+help="Try \`$progname --help' for more information." ## default
+
+
+# func_grep expression filename
+# Check whether EXPRESSION matches any line of FILENAME, without output.
+func_grep ()
+{
+ $GREP "$1" "$2" >/dev/null 2>&1
+}
+
+
+# func_mkdir_p directory-path
+# Make sure the entire path to DIRECTORY-PATH is available.
+func_mkdir_p ()
+{
+ my_directory_path="$1"
+ my_dir_list=
+
+ if test -n "$my_directory_path" && test "$opt_dry_run" != ":"; then
+
+ # Protect directory names starting with `-'
+ case $my_directory_path in
+ -*) my_directory_path="./$my_directory_path" ;;
+ esac
+
+ # While some portion of DIR does not yet exist...
+ while test ! -d "$my_directory_path"; do
+ # ...make a list in topmost first order. Use a colon delimited
+ # list incase some portion of path contains whitespace.
+ my_dir_list="$my_directory_path:$my_dir_list"
+
+ # If the last portion added has no slash in it, the list is done
+ case $my_directory_path in */*) ;; *) break ;; esac
+
+ # ...otherwise throw away the child directory and loop
+ my_directory_path=`$ECHO "$my_directory_path" | $SED -e "$dirname"`
+ done
+ my_dir_list=`$ECHO "$my_dir_list" | $SED 's,:*$,,'`
+
+ save_mkdir_p_IFS="$IFS"; IFS=':'
+ for my_dir in $my_dir_list; do
+ IFS="$save_mkdir_p_IFS"
+ # mkdir can fail with a `File exist' error if two processes
+ # try to create one of the directories concurrently. Don't
+ # stop in that case!
+ $MKDIR "$my_dir" 2>/dev/null || :
+ done
+ IFS="$save_mkdir_p_IFS"
+
+ # Bail out if we (or some other process) failed to create a directory.
+ test -d "$my_directory_path" || \
+ func_fatal_error "Failed to create \`$1'"
+ fi
+}
+
+
+# func_mktempdir [string]
+# Make a temporary directory that won't clash with other running
+# libtool processes, and avoids race conditions if possible. If
+# given, STRING is the basename for that directory.
+func_mktempdir ()
+{
+ my_template="${TMPDIR-/tmp}/${1-$progname}"
+
+ if test "$opt_dry_run" = ":"; then
+ # Return a directory name, but don't create it in dry-run mode
+ my_tmpdir="${my_template}-$$"
+ else
+
+ # If mktemp works, use that first and foremost
+ my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null`
+
+ if test ! -d "$my_tmpdir"; then
+ # Failing that, at least try and use $RANDOM to avoid a race
+ my_tmpdir="${my_template}-${RANDOM-0}$$"
+
+ save_mktempdir_umask=`umask`
+ umask 0077
+ $MKDIR "$my_tmpdir"
+ umask $save_mktempdir_umask
+ fi
+
+ # If we're not in dry-run mode, bomb out on failure
+ test -d "$my_tmpdir" || \
+ func_fatal_error "cannot create temporary directory \`$my_tmpdir'"
+ fi
+
+ $ECHO "$my_tmpdir"
+}
+
+
+# func_quote_for_eval arg
+# Aesthetically quote ARG to be evaled later.
+# This function returns two values: FUNC_QUOTE_FOR_EVAL_RESULT
+# is double-quoted, suitable for a subsequent eval, whereas
+# FUNC_QUOTE_FOR_EVAL_UNQUOTED_RESULT has merely all characters
+# which are still active within double quotes backslashified.
+func_quote_for_eval ()
+{
+ case $1 in
+ *[\\\`\"\$]*)
+ func_quote_for_eval_unquoted_result=`$ECHO "$1" | $SED "$sed_quote_subst"` ;;
+ *)
+ func_quote_for_eval_unquoted_result="$1" ;;
+ esac
+
+ case $func_quote_for_eval_unquoted_result in
+ # Double-quote args containing shell metacharacters to delay
+ # word splitting, command substitution and and variable
+ # expansion for a subsequent eval.
+ # Many Bourne shells cannot handle close brackets correctly
+ # in scan sets, so we specify it separately.
+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
+ func_quote_for_eval_result="\"$func_quote_for_eval_unquoted_result\""
+ ;;
+ *)
+ func_quote_for_eval_result="$func_quote_for_eval_unquoted_result"
+ esac
+}
+
+
+# func_quote_for_expand arg
+# Aesthetically quote ARG to be evaled later; same as above,
+# but do not quote variable references.
+func_quote_for_expand ()
+{
+ case $1 in
+ *[\\\`\"]*)
+ my_arg=`$ECHO "$1" | $SED \
+ -e "$double_quote_subst" -e "$sed_double_backslash"` ;;
+ *)
+ my_arg="$1" ;;
+ esac
+
+ case $my_arg in
+ # Double-quote args containing shell metacharacters to delay
+ # word splitting and command substitution for a subsequent eval.
+ # Many Bourne shells cannot handle close brackets correctly
+ # in scan sets, so we specify it separately.
+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
+ my_arg="\"$my_arg\""
+ ;;
+ esac
+
+ func_quote_for_expand_result="$my_arg"
+}
+
+
+# func_show_eval cmd [fail_exp]
+# Unless opt_silent is true, then output CMD. Then, if opt_dryrun is
+# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP
+# is given, then evaluate it.
+func_show_eval ()
+{
+ my_cmd="$1"
+ my_fail_exp="${2-:}"
+
+ ${opt_silent-false} || {
+ func_quote_for_expand "$my_cmd"
+ eval "func_echo $func_quote_for_expand_result"
+ }
+
+ if ${opt_dry_run-false}; then :; else
+ eval "$my_cmd"
+ my_status=$?
+ if test "$my_status" -eq 0; then :; else
+ eval "(exit $my_status); $my_fail_exp"
+ fi
+ fi
+}
+
+
+# func_show_eval_locale cmd [fail_exp]
+# Unless opt_silent is true, then output CMD. Then, if opt_dryrun is
+# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP
+# is given, then evaluate it. Use the saved locale for evaluation.
+func_show_eval_locale ()
+{
+ my_cmd="$1"
+ my_fail_exp="${2-:}"
+
+ ${opt_silent-false} || {
+ func_quote_for_expand "$my_cmd"
+ eval "func_echo $func_quote_for_expand_result"
+ }
+
+ if ${opt_dry_run-false}; then :; else
+ eval "$lt_user_locale
+ $my_cmd"
+ my_status=$?
+ eval "$lt_safe_locale"
+ if test "$my_status" -eq 0; then :; else
+ eval "(exit $my_status); $my_fail_exp"
+ fi
+ fi
+}
+
+# func_tr_sh
+# Turn $1 into a string suitable for a shell variable name.
+# Result is stored in $func_tr_sh_result. All characters
+# not in the set a-zA-Z0-9_ are replaced with '_'. Further,
+# if $1 begins with a digit, a '_' is prepended as well.
+func_tr_sh ()
+{
+ case $1 in
+ [0-9]* | *[!a-zA-Z0-9_]*)
+ func_tr_sh_result=`$ECHO "$1" | $SED 's/^\([0-9]\)/_\1/; s/[^a-zA-Z0-9_]/_/g'`
+ ;;
+ * )
+ func_tr_sh_result=$1
+ ;;
+ esac
+}
+
+
+# func_version
+# Echo version message to standard output and exit.
+func_version ()
+{
+ $opt_debug
+
+ $SED -n '/(C)/!b go
+ :more
+ /\./!{
+ N
+ s/\n# / /
+ b more
+ }
+ :go
+ /^# '$PROGRAM' (GNU /,/# warranty; / {
+ s/^# //
+ s/^# *$//
+ s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/
+ p
+ }' < "$progpath"
+ exit $?
+}
+
+# func_usage
+# Echo short help message to standard output and exit.
+func_usage ()
+{
+ $opt_debug
+
+ $SED -n '/^# Usage:/,/^# *.*--help/ {
+ s/^# //
+ s/^# *$//
+ s/\$progname/'$progname'/
+ p
+ }' < "$progpath"
+ echo
+ $ECHO "run \`$progname --help | more' for full usage"
+ exit $?
+}
+
+# func_help [NOEXIT]
+# Echo long help message to standard output and exit,
+# unless 'noexit' is passed as argument.
+func_help ()
+{
+ $opt_debug
+
+ $SED -n '/^# Usage:/,/# Report bugs to/ {
+ :print
+ s/^# //
+ s/^# *$//
+ s*\$progname*'$progname'*
+ s*\$host*'"$host"'*
+ s*\$SHELL*'"$SHELL"'*
+ s*\$LTCC*'"$LTCC"'*
+ s*\$LTCFLAGS*'"$LTCFLAGS"'*
+ s*\$LD*'"$LD"'*
+ s/\$with_gnu_ld/'"$with_gnu_ld"'/
+ s/\$automake_version/'"`(${AUTOMAKE-automake} --version) 2>/dev/null |$SED 1q`"'/
+ s/\$autoconf_version/'"`(${AUTOCONF-autoconf} --version) 2>/dev/null |$SED 1q`"'/
+ p
+ d
+ }
+ /^# .* home page:/b print
+ /^# General help using/b print
+ ' < "$progpath"
+ ret=$?
+ if test -z "$1"; then
+ exit $ret
+ fi
+}
+
+# func_missing_arg argname
+# Echo program name prefixed message to standard error and set global
+# exit_cmd.
+func_missing_arg ()
+{
+ $opt_debug
+
+ func_error "missing argument for $1."
+ exit_cmd=exit
+}
+
+
+# func_split_short_opt shortopt
+# Set func_split_short_opt_name and func_split_short_opt_arg shell
+# variables after splitting SHORTOPT after the 2nd character.
+func_split_short_opt ()
+{
+ my_sed_short_opt='1s/^\(..\).*$/\1/;q'
+ my_sed_short_rest='1s/^..\(.*\)$/\1/;q'
+
+ func_split_short_opt_name=`$ECHO "$1" | $SED "$my_sed_short_opt"`
+ func_split_short_opt_arg=`$ECHO "$1" | $SED "$my_sed_short_rest"`
+} # func_split_short_opt may be replaced by extended shell implementation
+
+
+# func_split_long_opt longopt
+# Set func_split_long_opt_name and func_split_long_opt_arg shell
+# variables after splitting LONGOPT at the `=' sign.
+func_split_long_opt ()
+{
+ my_sed_long_opt='1s/^\(--[^=]*\)=.*/\1/;q'
+ my_sed_long_arg='1s/^--[^=]*=//'
+
+ func_split_long_opt_name=`$ECHO "$1" | $SED "$my_sed_long_opt"`
+ func_split_long_opt_arg=`$ECHO "$1" | $SED "$my_sed_long_arg"`
+} # func_split_long_opt may be replaced by extended shell implementation
+
+exit_cmd=:
+
+
+
+
+
+magic="%%%MAGIC variable%%%"
+magic_exe="%%%MAGIC EXE variable%%%"
+
+# Global variables.
+nonopt=
+preserve_args=
+lo2o="s/\\.lo\$/.${objext}/"
+o2lo="s/\\.${objext}\$/.lo/"
+extracted_archives=
+extracted_serial=0
+
+# If this variable is set in any of the actions, the command in it
+# will be execed at the end. This prevents here-documents from being
+# left over by shells.
+exec_cmd=
+
+# func_append var value
+# Append VALUE to the end of shell variable VAR.
+func_append ()
+{
+ eval "${1}=\$${1}\${2}"
+} # func_append may be replaced by extended shell implementation
+
+# func_append_quoted var value
+# Quote VALUE and append to the end of shell variable VAR, separated
+# by a space.
+func_append_quoted ()
+{
+ func_quote_for_eval "${2}"
+ eval "${1}=\$${1}\\ \$func_quote_for_eval_result"
+} # func_append_quoted may be replaced by extended shell implementation
+
+
+# func_arith arithmetic-term...
+func_arith ()
+{
+ func_arith_result=`expr "${@}"`
+} # func_arith may be replaced by extended shell implementation
+
+
+# func_len string
+# STRING may not start with a hyphen.
+func_len ()
+{
+ func_len_result=`expr "${1}" : ".*" 2>/dev/null || echo $max_cmd_len`
+} # func_len may be replaced by extended shell implementation
+
+
+# func_lo2o object
+func_lo2o ()
+{
+ func_lo2o_result=`$ECHO "${1}" | $SED "$lo2o"`
+} # func_lo2o may be replaced by extended shell implementation
+
+
+# func_xform libobj-or-source
+func_xform ()
+{
+ func_xform_result=`$ECHO "${1}" | $SED 's/\.[^.]*$/.lo/'`
+} # func_xform may be replaced by extended shell implementation
+
+
+# func_fatal_configuration arg...
+# Echo program name prefixed message to standard error, followed by
+# a configuration failure hint, and exit.
+func_fatal_configuration ()
+{
+ func_error ${1+"$@"}
+ func_error "See the $PACKAGE documentation for more information."
+ func_fatal_error "Fatal configuration error."
+}
+
+
+# func_config
+# Display the configuration for all the tags in this script.
+func_config ()
+{
+ re_begincf='^# ### BEGIN LIBTOOL'
+ re_endcf='^# ### END LIBTOOL'
+
+ # Default configuration.
+ $SED "1,/$re_begincf CONFIG/d;/$re_endcf CONFIG/,\$d" < "$progpath"
+
+ # Now print the configurations for the tags.
+ for tagname in $taglist; do
+ $SED -n "/$re_begincf TAG CONFIG: $tagname\$/,/$re_endcf TAG CONFIG: $tagname\$/p" < "$progpath"
+ done
+
+ exit $?
+}
+
+# func_features
+# Display the features supported by this script.
+func_features ()
+{
+ echo "host: $host"
+ if test "$build_libtool_libs" = yes; then
+ echo "enable shared libraries"
+ else
+ echo "disable shared libraries"
+ fi
+ if test "$build_old_libs" = yes; then
+ echo "enable static libraries"
+ else
+ echo "disable static libraries"
+ fi
+
+ exit $?
+}
+
+# func_enable_tag tagname
+# Verify that TAGNAME is valid, and either flag an error and exit, or
+# enable the TAGNAME tag. We also add TAGNAME to the global $taglist
+# variable here.
+func_enable_tag ()
+{
+ # Global variable:
+ tagname="$1"
+
+ re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$"
+ re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$"
+ sed_extractcf="/$re_begincf/,/$re_endcf/p"
+
+ # Validate tagname.
+ case $tagname in
+ *[!-_A-Za-z0-9,/]*)
+ func_fatal_error "invalid tag name: $tagname"
+ ;;
+ esac
+
+ # Don't test for the "default" C tag, as we know it's
+ # there but not specially marked.
+ case $tagname in
+ CC) ;;
+ *)
+ if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then
+ taglist="$taglist $tagname"
+
+ # Evaluate the configuration. Be careful to quote the path
+ # and the sed script, to avoid splitting on whitespace, but
+ # also don't use non-portable quotes within backquotes within
+ # quotes we have to do it in 2 steps:
+ extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"`
+ eval "$extractedcf"
+ else
+ func_error "ignoring unknown tag $tagname"
+ fi
+ ;;
+ esac
+}
+
+# func_check_version_match
+# Ensure that we are using m4 macros, and libtool script from the same
+# release of libtool.
+func_check_version_match ()
+{
+ if test "$package_revision" != "$macro_revision"; then
+ if test "$VERSION" != "$macro_version"; then
+ if test -z "$macro_version"; then
+ cat >&2 <<_LT_EOF
+$progname: Version mismatch error. This is $PACKAGE $VERSION, but the
+$progname: definition of this LT_INIT comes from an older release.
+$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
+$progname: and run autoconf again.
+_LT_EOF
+ else
+ cat >&2 <<_LT_EOF
+$progname: Version mismatch error. This is $PACKAGE $VERSION, but the
+$progname: definition of this LT_INIT comes from $PACKAGE $macro_version.
+$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
+$progname: and run autoconf again.
+_LT_EOF
+ fi
+ else
+ cat >&2 <<_LT_EOF
+$progname: Version mismatch error. This is $PACKAGE $VERSION, revision $package_revision,
+$progname: but the definition of this LT_INIT comes from revision $macro_revision.
+$progname: You should recreate aclocal.m4 with macros from revision $package_revision
+$progname: of $PACKAGE $VERSION and run autoconf again.
+_LT_EOF
+ fi
+
+ exit $EXIT_MISMATCH
+ fi
+}
+
+
+# Shorthand for --mode=foo, only valid as the first argument
+case $1 in
+clean|clea|cle|cl)
+ shift; set dummy --mode clean ${1+"$@"}; shift
+ ;;
+compile|compil|compi|comp|com|co|c)
+ shift; set dummy --mode compile ${1+"$@"}; shift
+ ;;
+execute|execut|execu|exec|exe|ex|e)
+ shift; set dummy --mode execute ${1+"$@"}; shift
+ ;;
+finish|finis|fini|fin|fi|f)
+ shift; set dummy --mode finish ${1+"$@"}; shift
+ ;;
+install|instal|insta|inst|ins|in|i)
+ shift; set dummy --mode install ${1+"$@"}; shift
+ ;;
+link|lin|li|l)
+ shift; set dummy --mode link ${1+"$@"}; shift
+ ;;
+uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u)
+ shift; set dummy --mode uninstall ${1+"$@"}; shift
+ ;;
+esac
+
+
+
+# Option defaults:
+opt_debug=:
+opt_dry_run=false
+opt_config=false
+opt_preserve_dup_deps=false
+opt_features=false
+opt_finish=false
+opt_help=false
+opt_help_all=false
+opt_silent=:
+opt_warning=:
+opt_verbose=:
+opt_silent=false
+opt_verbose=false
+
+
+# Parse options once, thoroughly. This comes as soon as possible in the
+# script to make things like `--version' happen as quickly as we can.
+{
+ # this just eases exit handling
+ while test $# -gt 0; do
+ opt="$1"
+ shift
+ case $opt in
+ --debug|-x) opt_debug='set -x'
+ func_echo "enabling shell trace mode"
+ $opt_debug
+ ;;
+ --dry-run|--dryrun|-n)
+ opt_dry_run=:
+ ;;
+ --config)
+ opt_config=:
+func_config
+ ;;
+ --dlopen|-dlopen)
+ optarg="$1"
+ opt_dlopen="${opt_dlopen+$opt_dlopen
+}$optarg"
+ shift
+ ;;
+ --preserve-dup-deps)
+ opt_preserve_dup_deps=:
+ ;;
+ --features)
+ opt_features=:
+func_features
+ ;;
+ --finish)
+ opt_finish=:
+set dummy --mode finish ${1+"$@"}; shift
+ ;;
+ --help)
+ opt_help=:
+ ;;
+ --help-all)
+ opt_help_all=:
+opt_help=': help-all'
+ ;;
+ --mode)
+ test $# = 0 && func_missing_arg $opt && break
+ optarg="$1"
+ opt_mode="$optarg"
+case $optarg in
+ # Valid mode arguments:
+ clean|compile|execute|finish|install|link|relink|uninstall) ;;
+
+ # Catch anything else as an error
+ *) func_error "invalid argument for $opt"
+ exit_cmd=exit
+ break
+ ;;
+esac
+ shift
+ ;;
+ --no-silent|--no-quiet)
+ opt_silent=false
+func_append preserve_args " $opt"
+ ;;
+ --no-warning|--no-warn)
+ opt_warning=false
+func_append preserve_args " $opt"
+ ;;
+ --no-verbose)
+ opt_verbose=false
+func_append preserve_args " $opt"
+ ;;
+ --silent|--quiet)
+ opt_silent=:
+func_append preserve_args " $opt"
+ opt_verbose=false
+ ;;
+ --verbose|-v)
+ opt_verbose=:
+func_append preserve_args " $opt"
+opt_silent=false
+ ;;
+ --tag)
+ test $# = 0 && func_missing_arg $opt && break
+ optarg="$1"
+ opt_tag="$optarg"
+func_append preserve_args " $opt $optarg"
+func_enable_tag "$optarg"
+ shift
+ ;;
+
+ -\?|-h) func_usage ;;
+ --help) func_help ;;
+ --version) func_version ;;
+
+ # Separate optargs to long options:
+ --*=*)
+ func_split_long_opt "$opt"
+ set dummy "$func_split_long_opt_name" "$func_split_long_opt_arg" ${1+"$@"}
+ shift
+ ;;
+
+ # Separate non-argument short options:
+ -\?*|-h*|-n*|-v*)
+ func_split_short_opt "$opt"
+ set dummy "$func_split_short_opt_name" "-$func_split_short_opt_arg" ${1+"$@"}
+ shift
+ ;;
+
+ --) break ;;
+ -*) func_fatal_help "unrecognized option \`$opt'" ;;
+ *) set dummy "$opt" ${1+"$@"}; shift; break ;;
+ esac
+ done
+
+ # Validate options:
+
+ # save first non-option argument
+ if test "$#" -gt 0; then
+ nonopt="$opt"
+ shift
+ fi
+
+ # preserve --debug
+ test "$opt_debug" = : || func_append preserve_args " --debug"
+
+ case $host in
+ *cygwin* | *mingw* | *pw32* | *cegcc*)
+ # don't eliminate duplications in $postdeps and $predeps
+ opt_duplicate_compiler_generated_deps=:
+ ;;
+ *)
+ opt_duplicate_compiler_generated_deps=$opt_preserve_dup_deps
+ ;;
+ esac
+
+ $opt_help || {
+ # Sanity checks first:
+ func_check_version_match
+
+ if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
+ func_fatal_configuration "not configured to build any kind of library"
+ fi
+
+ # Darwin sucks
+ eval std_shrext=\"$shrext_cmds\"
+
+ # Only execute mode is allowed to have -dlopen flags.
+ if test -n "$opt_dlopen" && test "$opt_mode" != execute; then
+ func_error "unrecognized option \`-dlopen'"
+ $ECHO "$help" 1>&2
+ exit $EXIT_FAILURE
+ fi
+
+ # Change the help message to a mode-specific one.
+ generic_help="$help"
+ help="Try \`$progname --help --mode=$opt_mode' for more information."
+ }
+
+
+ # Bail if the options were screwed
+ $exit_cmd $EXIT_FAILURE
+}
+
+
+
+
+## ----------- ##
+## Main. ##
+## ----------- ##
+
+# func_lalib_p file
+# True iff FILE is a libtool `.la' library or `.lo' object file.
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_lalib_p ()
+{
+ test -f "$1" &&
+ $SED -e 4q "$1" 2>/dev/null \
+ | $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1
+}
+
+# func_lalib_unsafe_p file
+# True iff FILE is a libtool `.la' library or `.lo' object file.
+# This function implements the same check as func_lalib_p without
+# resorting to external programs. To this end, it redirects stdin and
+# closes it afterwards, without saving the original file descriptor.
+# As a safety measure, use it only where a negative result would be
+# fatal anyway. Works if `file' does not exist.
+func_lalib_unsafe_p ()
+{
+ lalib_p=no
+ if test -f "$1" && test -r "$1" && exec 5<&0 <"$1"; then
+ for lalib_p_l in 1 2 3 4
+ do
+ read lalib_p_line
+ case "$lalib_p_line" in
+ \#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;;
+ esac
+ done
+ exec 0<&5 5<&-
+ fi
+ test "$lalib_p" = yes
+}
+
+# func_ltwrapper_script_p file
+# True iff FILE is a libtool wrapper script
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_ltwrapper_script_p ()
+{
+ func_lalib_p "$1"
+}
+
+# func_ltwrapper_executable_p file
+# True iff FILE is a libtool wrapper executable
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_ltwrapper_executable_p ()
+{
+ func_ltwrapper_exec_suffix=
+ case $1 in
+ *.exe) ;;
+ *) func_ltwrapper_exec_suffix=.exe ;;
+ esac
+ $GREP "$magic_exe" "$1$func_ltwrapper_exec_suffix" >/dev/null 2>&1
+}
+
+# func_ltwrapper_scriptname file
+# Assumes file is an ltwrapper_executable
+# uses $file to determine the appropriate filename for a
+# temporary ltwrapper_script.
+func_ltwrapper_scriptname ()
+{
+ func_dirname_and_basename "$1" "" "."
+ func_stripname '' '.exe' "$func_basename_result"
+ func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper"
+}
+
+# func_ltwrapper_p file
+# True iff FILE is a libtool wrapper script or wrapper executable
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_ltwrapper_p ()
+{
+ func_ltwrapper_script_p "$1" || func_ltwrapper_executable_p "$1"
+}
+
+
+# func_execute_cmds commands fail_cmd
+# Execute tilde-delimited COMMANDS.
+# If FAIL_CMD is given, eval that upon failure.
+# FAIL_CMD may read-access the current command in variable CMD!
+func_execute_cmds ()
+{
+ $opt_debug
+ save_ifs=$IFS; IFS='~'
+ for cmd in $1; do
+ IFS=$save_ifs
+ eval cmd=\"$cmd\"
+ func_show_eval "$cmd" "${2-:}"
+ done
+ IFS=$save_ifs
+}
+
+
+# func_source file
+# Source FILE, adding directory component if necessary.
+# Note that it is not necessary on cygwin/mingw to append a dot to
+# FILE even if both FILE and FILE.exe exist: automatic-append-.exe
+# behavior happens only for exec(3), not for open(2)! Also, sourcing
+# `FILE.' does not work on cygwin managed mounts.
+func_source ()
+{
+ $opt_debug
+ case $1 in
+ */* | *\\*) . "$1" ;;
+ *) . "./$1" ;;
+ esac
+}
+
+
+# func_resolve_sysroot PATH
+# Replace a leading = in PATH with a sysroot. Store the result into
+# func_resolve_sysroot_result
+func_resolve_sysroot ()
+{
+ func_resolve_sysroot_result=$1
+ case $func_resolve_sysroot_result in
+ =*)
+ func_stripname '=' '' "$func_resolve_sysroot_result"
+ func_resolve_sysroot_result=$lt_sysroot$func_stripname_result
+ ;;
+ esac
+}
+
+# func_replace_sysroot PATH
+# If PATH begins with the sysroot, replace it with = and
+# store the result into func_replace_sysroot_result.
+func_replace_sysroot ()
+{
+ case "$lt_sysroot:$1" in
+ ?*:"$lt_sysroot"*)
+ func_stripname "$lt_sysroot" '' "$1"
+ func_replace_sysroot_result="=$func_stripname_result"
+ ;;
+ *)
+ # Including no sysroot.
+ func_replace_sysroot_result=$1
+ ;;
+ esac
+}
+
+# func_infer_tag arg
+# Infer tagged configuration to use if any are available and
+# if one wasn't chosen via the "--tag" command line option.
+# Only attempt this if the compiler in the base compile
+# command doesn't match the default compiler.
+# arg is usually of the form 'gcc ...'
+func_infer_tag ()
+{
+ $opt_debug
+ if test -n "$available_tags" && test -z "$tagname"; then
+ CC_quoted=
+ for arg in $CC; do
+ func_append_quoted CC_quoted "$arg"
+ done
+ CC_expanded=`func_echo_all $CC`
+ CC_quoted_expanded=`func_echo_all $CC_quoted`
+ case $@ in
+ # Blanks in the command may have been stripped by the calling shell,
+ # but not from the CC environment variable when configure was run.
+ " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \
+ " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) ;;
+ # Blanks at the start of $base_compile will cause this to fail
+ # if we don't check for them as well.
+ *)
+ for z in $available_tags; do
+ if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then
+ # Evaluate the configuration.
+ eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
+ CC_quoted=
+ for arg in $CC; do
+ # Double-quote args containing other shell metacharacters.
+ func_append_quoted CC_quoted "$arg"
+ done
+ CC_expanded=`func_echo_all $CC`
+ CC_quoted_expanded=`func_echo_all $CC_quoted`
+ case "$@ " in
+ " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \
+ " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*)
+ # The compiler in the base compile command matches
+ # the one in the tagged configuration.
+ # Assume this is the tagged configuration we want.
+ tagname=$z
+ break
+ ;;
+ esac
+ fi
+ done
+ # If $tagname still isn't set, then no tagged configuration
+ # was found and let the user know that the "--tag" command
+ # line option must be used.
+ if test -z "$tagname"; then
+ func_echo "unable to infer tagged configuration"
+ func_fatal_error "specify a tag with \`--tag'"
+# else
+# func_verbose "using $tagname tagged configuration"
+ fi
+ ;;
+ esac
+ fi
+}
+
+
+
+# func_write_libtool_object output_name pic_name nonpic_name
+# Create a libtool object file (analogous to a ".la" file),
+# but don't create it if we're doing a dry run.
+func_write_libtool_object ()
+{
+ write_libobj=${1}
+ if test "$build_libtool_libs" = yes; then
+ write_lobj=\'${2}\'
+ else
+ write_lobj=none
+ fi
+
+ if test "$build_old_libs" = yes; then
+ write_oldobj=\'${3}\'
+ else
+ write_oldobj=none
+ fi
+
+ $opt_dry_run || {
+ cat >${write_libobj}T <<EOF
+# $write_libobj - a libtool object file
+# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+#
+# Please DO NOT delete this file!
+# It is necessary for linking the library.
+
+# Name of the PIC object.
+pic_object=$write_lobj
+
+# Name of the non-PIC object
+non_pic_object=$write_oldobj
+
+EOF
+ $MV "${write_libobj}T" "${write_libobj}"
+ }
+}
+
+
+##################################################
+# FILE NAME AND PATH CONVERSION HELPER FUNCTIONS #
+##################################################
+
+# func_convert_core_file_wine_to_w32 ARG
+# Helper function used by file name conversion functions when $build is *nix,
+# and $host is mingw, cygwin, or some other w32 environment. Relies on a
+# correctly configured wine environment available, with the winepath program
+# in $build's $PATH.
+#
+# ARG is the $build file name to be converted to w32 format.
+# Result is available in $func_convert_core_file_wine_to_w32_result, and will
+# be empty on error (or when ARG is empty)
+func_convert_core_file_wine_to_w32 ()
+{
+ $opt_debug
+ func_convert_core_file_wine_to_w32_result="$1"
+ if test -n "$1"; then
+ # Unfortunately, winepath does not exit with a non-zero error code, so we
+ # are forced to check the contents of stdout. On the other hand, if the
+ # command is not found, the shell will set an exit code of 127 and print
+ # *an error message* to stdout. So we must check for both error code of
+ # zero AND non-empty stdout, which explains the odd construction:
+ func_convert_core_file_wine_to_w32_tmp=`winepath -w "$1" 2>/dev/null`
+ if test "$?" -eq 0 && test -n "${func_convert_core_file_wine_to_w32_tmp}"; then
+ func_convert_core_file_wine_to_w32_result=`$ECHO "$func_convert_core_file_wine_to_w32_tmp" |
+ $SED -e "$lt_sed_naive_backslashify"`
+ else
+ func_convert_core_file_wine_to_w32_result=
+ fi
+ fi
+}
+# end: func_convert_core_file_wine_to_w32
+
+
+# func_convert_core_path_wine_to_w32 ARG
+# Helper function used by path conversion functions when $build is *nix, and
+# $host is mingw, cygwin, or some other w32 environment. Relies on a correctly
+# configured wine environment available, with the winepath program in $build's
+# $PATH. Assumes ARG has no leading or trailing path separator characters.
+#
+# ARG is path to be converted from $build format to win32.
+# Result is available in $func_convert_core_path_wine_to_w32_result.
+# Unconvertible file (directory) names in ARG are skipped; if no directory names
+# are convertible, then the result may be empty.
+func_convert_core_path_wine_to_w32 ()
+{
+ $opt_debug
+ # unfortunately, winepath doesn't convert paths, only file names
+ func_convert_core_path_wine_to_w32_result=""
+ if test -n "$1"; then
+ oldIFS=$IFS
+ IFS=:
+ for func_convert_core_path_wine_to_w32_f in $1; do
+ IFS=$oldIFS
+ func_convert_core_file_wine_to_w32 "$func_convert_core_path_wine_to_w32_f"
+ if test -n "$func_convert_core_file_wine_to_w32_result" ; then
+ if test -z "$func_convert_core_path_wine_to_w32_result"; then
+ func_convert_core_path_wine_to_w32_result="$func_convert_core_file_wine_to_w32_result"
+ else
+ func_append func_convert_core_path_wine_to_w32_result ";$func_convert_core_file_wine_to_w32_result"
+ fi
+ fi
+ done
+ IFS=$oldIFS
+ fi
+}
+# end: func_convert_core_path_wine_to_w32
+
+
+# func_cygpath ARGS...
+# Wrapper around calling the cygpath program via LT_CYGPATH. This is used when
+# when (1) $build is *nix and Cygwin is hosted via a wine environment; or (2)
+# $build is MSYS and $host is Cygwin, or (3) $build is Cygwin. In case (1) or
+# (2), returns the Cygwin file name or path in func_cygpath_result (input
+# file name or path is assumed to be in w32 format, as previously converted
+# from $build's *nix or MSYS format). In case (3), returns the w32 file name
+# or path in func_cygpath_result (input file name or path is assumed to be in
+# Cygwin format). Returns an empty string on error.
+#
+# ARGS are passed to cygpath, with the last one being the file name or path to
+# be converted.
+#
+# Specify the absolute *nix (or w32) name to cygpath in the LT_CYGPATH
+# environment variable; do not put it in $PATH.
+func_cygpath ()
+{
+ $opt_debug
+ if test -n "$LT_CYGPATH" && test -f "$LT_CYGPATH"; then
+ func_cygpath_result=`$LT_CYGPATH "$@" 2>/dev/null`
+ if test "$?" -ne 0; then
+ # on failure, ensure result is empty
+ func_cygpath_result=
+ fi
+ else
+ func_cygpath_result=
+ func_error "LT_CYGPATH is empty or specifies non-existent file: \`$LT_CYGPATH'"
+ fi
+}
+#end: func_cygpath
+
+
+# func_convert_core_msys_to_w32 ARG
+# Convert file name or path ARG from MSYS format to w32 format. Return
+# result in func_convert_core_msys_to_w32_result.
+func_convert_core_msys_to_w32 ()
+{
+ $opt_debug
+ # awkward: cmd appends spaces to result
+ func_convert_core_msys_to_w32_result=`( cmd //c echo "$1" ) 2>/dev/null |
+ $SED -e 's/[ ]*$//' -e "$lt_sed_naive_backslashify"`
+}
+#end: func_convert_core_msys_to_w32
+
+
+# func_convert_file_check ARG1 ARG2
+# Verify that ARG1 (a file name in $build format) was converted to $host
+# format in ARG2. Otherwise, emit an error message, but continue (resetting
+# func_to_host_file_result to ARG1).
+func_convert_file_check ()
+{
+ $opt_debug
+ if test -z "$2" && test -n "$1" ; then
+ func_error "Could not determine host file name corresponding to"
+ func_error " \`$1'"
+ func_error "Continuing, but uninstalled executables may not work."
+ # Fallback:
+ func_to_host_file_result="$1"
+ fi
+}
+# end func_convert_file_check
+
+
+# func_convert_path_check FROM_PATHSEP TO_PATHSEP FROM_PATH TO_PATH
+# Verify that FROM_PATH (a path in $build format) was converted to $host
+# format in TO_PATH. Otherwise, emit an error message, but continue, resetting
+# func_to_host_file_result to a simplistic fallback value (see below).
+func_convert_path_check ()
+{
+ $opt_debug
+ if test -z "$4" && test -n "$3"; then
+ func_error "Could not determine the host path corresponding to"
+ func_error " \`$3'"
+ func_error "Continuing, but uninstalled executables may not work."
+ # Fallback. This is a deliberately simplistic "conversion" and
+ # should not be "improved". See libtool.info.
+ if test "x$1" != "x$2"; then
+ lt_replace_pathsep_chars="s|$1|$2|g"
+ func_to_host_path_result=`echo "$3" |
+ $SED -e "$lt_replace_pathsep_chars"`
+ else
+ func_to_host_path_result="$3"
+ fi
+ fi
+}
+# end func_convert_path_check
+
+
+# func_convert_path_front_back_pathsep FRONTPAT BACKPAT REPL ORIG
+# Modifies func_to_host_path_result by prepending REPL if ORIG matches FRONTPAT
+# and appending REPL if ORIG matches BACKPAT.
+func_convert_path_front_back_pathsep ()
+{
+ $opt_debug
+ case $4 in
+ $1 ) func_to_host_path_result="$3$func_to_host_path_result"
+ ;;
+ esac
+ case $4 in
+ $2 ) func_append func_to_host_path_result "$3"
+ ;;
+ esac
+}
+# end func_convert_path_front_back_pathsep
+
+
+##################################################
+# $build to $host FILE NAME CONVERSION FUNCTIONS #
+##################################################
+# invoked via `$to_host_file_cmd ARG'
+#
+# In each case, ARG is the path to be converted from $build to $host format.
+# Result will be available in $func_to_host_file_result.
+
+
+# func_to_host_file ARG
+# Converts the file name ARG from $build format to $host format. Return result
+# in func_to_host_file_result.
+func_to_host_file ()
+{
+ $opt_debug
+ $to_host_file_cmd "$1"
+}
+# end func_to_host_file
+
+
+# func_to_tool_file ARG LAZY
+# converts the file name ARG from $build format to toolchain format. Return
+# result in func_to_tool_file_result. If the conversion in use is listed
+# in (the comma separated) LAZY, no conversion takes place.
+func_to_tool_file ()
+{
+ $opt_debug
+ case ,$2, in
+ *,"$to_tool_file_cmd",*)
+ func_to_tool_file_result=$1
+ ;;
+ *)
+ $to_tool_file_cmd "$1"
+ func_to_tool_file_result=$func_to_host_file_result
+ ;;
+ esac
+}
+# end func_to_tool_file
+
+
+# func_convert_file_noop ARG
+# Copy ARG to func_to_host_file_result.
+func_convert_file_noop ()
+{
+ func_to_host_file_result="$1"
+}
+# end func_convert_file_noop
+
+
+# func_convert_file_msys_to_w32 ARG
+# Convert file name ARG from (mingw) MSYS to (mingw) w32 format; automatic
+# conversion to w32 is not available inside the cwrapper. Returns result in
+# func_to_host_file_result.
+func_convert_file_msys_to_w32 ()
+{
+ $opt_debug
+ func_to_host_file_result="$1"
+ if test -n "$1"; then
+ func_convert_core_msys_to_w32 "$1"
+ func_to_host_file_result="$func_convert_core_msys_to_w32_result"
+ fi
+ func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_msys_to_w32
+
+
+# func_convert_file_cygwin_to_w32 ARG
+# Convert file name ARG from Cygwin to w32 format. Returns result in
+# func_to_host_file_result.
+func_convert_file_cygwin_to_w32 ()
+{
+ $opt_debug
+ func_to_host_file_result="$1"
+ if test -n "$1"; then
+ # because $build is cygwin, we call "the" cygpath in $PATH; no need to use
+ # LT_CYGPATH in this case.
+ func_to_host_file_result=`cygpath -m "$1"`
+ fi
+ func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_cygwin_to_w32
+
+
+# func_convert_file_nix_to_w32 ARG
+# Convert file name ARG from *nix to w32 format. Requires a wine environment
+# and a working winepath. Returns result in func_to_host_file_result.
+func_convert_file_nix_to_w32 ()
+{
+ $opt_debug
+ func_to_host_file_result="$1"
+ if test -n "$1"; then
+ func_convert_core_file_wine_to_w32 "$1"
+ func_to_host_file_result="$func_convert_core_file_wine_to_w32_result"
+ fi
+ func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_nix_to_w32
+
+
+# func_convert_file_msys_to_cygwin ARG
+# Convert file name ARG from MSYS to Cygwin format. Requires LT_CYGPATH set.
+# Returns result in func_to_host_file_result.
+func_convert_file_msys_to_cygwin ()
+{
+ $opt_debug
+ func_to_host_file_result="$1"
+ if test -n "$1"; then
+ func_convert_core_msys_to_w32 "$1"
+ func_cygpath -u "$func_convert_core_msys_to_w32_result"
+ func_to_host_file_result="$func_cygpath_result"
+ fi
+ func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_msys_to_cygwin
+
+
+# func_convert_file_nix_to_cygwin ARG
+# Convert file name ARG from *nix to Cygwin format. Requires Cygwin installed
+# in a wine environment, working winepath, and LT_CYGPATH set. Returns result
+# in func_to_host_file_result.
+func_convert_file_nix_to_cygwin ()
+{
+ $opt_debug
+ func_to_host_file_result="$1"
+ if test -n "$1"; then
+ # convert from *nix to w32, then use cygpath to convert from w32 to cygwin.
+ func_convert_core_file_wine_to_w32 "$1"
+ func_cygpath -u "$func_convert_core_file_wine_to_w32_result"
+ func_to_host_file_result="$func_cygpath_result"
+ fi
+ func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_nix_to_cygwin
+
+
+#############################################
+# $build to $host PATH CONVERSION FUNCTIONS #
+#############################################
+# invoked via `$to_host_path_cmd ARG'
+#
+# In each case, ARG is the path to be converted from $build to $host format.
+# The result will be available in $func_to_host_path_result.
+#
+# Path separators are also converted from $build format to $host format. If
+# ARG begins or ends with a path separator character, it is preserved (but
+# converted to $host format) on output.
+#
+# All path conversion functions are named using the following convention:
+# file name conversion function : func_convert_file_X_to_Y ()
+# path conversion function : func_convert_path_X_to_Y ()
+# where, for any given $build/$host combination the 'X_to_Y' value is the
+# same. If conversion functions are added for new $build/$host combinations,
+# the two new functions must follow this pattern, or func_init_to_host_path_cmd
+# will break.
+
+
+# func_init_to_host_path_cmd
+# Ensures that function "pointer" variable $to_host_path_cmd is set to the
+# appropriate value, based on the value of $to_host_file_cmd.
+to_host_path_cmd=
+func_init_to_host_path_cmd ()
+{
+ $opt_debug
+ if test -z "$to_host_path_cmd"; then
+ func_stripname 'func_convert_file_' '' "$to_host_file_cmd"
+ to_host_path_cmd="func_convert_path_${func_stripname_result}"
+ fi
+}
+
+
+# func_to_host_path ARG
+# Converts the path ARG from $build format to $host format. Return result
+# in func_to_host_path_result.
+func_to_host_path ()
+{
+ $opt_debug
+ func_init_to_host_path_cmd
+ $to_host_path_cmd "$1"
+}
+# end func_to_host_path
+
+
+# func_convert_path_noop ARG
+# Copy ARG to func_to_host_path_result.
+func_convert_path_noop ()
+{
+ func_to_host_path_result="$1"
+}
+# end func_convert_path_noop
+
+
+# func_convert_path_msys_to_w32 ARG
+# Convert path ARG from (mingw) MSYS to (mingw) w32 format; automatic
+# conversion to w32 is not available inside the cwrapper. Returns result in
+# func_to_host_path_result.
+func_convert_path_msys_to_w32 ()
+{
+ $opt_debug
+ func_to_host_path_result="$1"
+ if test -n "$1"; then
+ # Remove leading and trailing path separator characters from ARG. MSYS
+ # behavior is inconsistent here; cygpath turns them into '.;' and ';.';
+ # and winepath ignores them completely.
+ func_stripname : : "$1"
+ func_to_host_path_tmp1=$func_stripname_result
+ func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
+ func_to_host_path_result="$func_convert_core_msys_to_w32_result"
+ func_convert_path_check : ";" \
+ "$func_to_host_path_tmp1" "$func_to_host_path_result"
+ func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
+ fi
+}
+# end func_convert_path_msys_to_w32
+
+
+# func_convert_path_cygwin_to_w32 ARG
+# Convert path ARG from Cygwin to w32 format. Returns result in
+# func_to_host_file_result.
+func_convert_path_cygwin_to_w32 ()
+{
+ $opt_debug
+ func_to_host_path_result="$1"
+ if test -n "$1"; then
+ # See func_convert_path_msys_to_w32:
+ func_stripname : : "$1"
+ func_to_host_path_tmp1=$func_stripname_result
+ func_to_host_path_result=`cygpath -m -p "$func_to_host_path_tmp1"`
+ func_convert_path_check : ";" \
+ "$func_to_host_path_tmp1" "$func_to_host_path_result"
+ func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
+ fi
+}
+# end func_convert_path_cygwin_to_w32
+
+
+# func_convert_path_nix_to_w32 ARG
+# Convert path ARG from *nix to w32 format. Requires a wine environment and
+# a working winepath. Returns result in func_to_host_file_result.
+func_convert_path_nix_to_w32 ()
+{
+ $opt_debug
+ func_to_host_path_result="$1"
+ if test -n "$1"; then
+ # See func_convert_path_msys_to_w32:
+ func_stripname : : "$1"
+ func_to_host_path_tmp1=$func_stripname_result
+ func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
+ func_to_host_path_result="$func_convert_core_path_wine_to_w32_result"
+ func_convert_path_check : ";" \
+ "$func_to_host_path_tmp1" "$func_to_host_path_result"
+ func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
+ fi
+}
+# end func_convert_path_nix_to_w32
+
+
+# func_convert_path_msys_to_cygwin ARG
+# Convert path ARG from MSYS to Cygwin format. Requires LT_CYGPATH set.
+# Returns result in func_to_host_file_result.
+func_convert_path_msys_to_cygwin ()
+{
+ $opt_debug
+ func_to_host_path_result="$1"
+ if test -n "$1"; then
+ # See func_convert_path_msys_to_w32:
+ func_stripname : : "$1"
+ func_to_host_path_tmp1=$func_stripname_result
+ func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
+ func_cygpath -u -p "$func_convert_core_msys_to_w32_result"
+ func_to_host_path_result="$func_cygpath_result"
+ func_convert_path_check : : \
+ "$func_to_host_path_tmp1" "$func_to_host_path_result"
+ func_convert_path_front_back_pathsep ":*" "*:" : "$1"
+ fi
+}
+# end func_convert_path_msys_to_cygwin
+
+
+# func_convert_path_nix_to_cygwin ARG
+# Convert path ARG from *nix to Cygwin format. Requires Cygwin installed in a
+# a wine environment, working winepath, and LT_CYGPATH set. Returns result in
+# func_to_host_file_result.
+func_convert_path_nix_to_cygwin ()
+{
+ $opt_debug
+ func_to_host_path_result="$1"
+ if test -n "$1"; then
+ # Remove leading and trailing path separator characters from
+ # ARG. msys behavior is inconsistent here, cygpath turns them
+ # into '.;' and ';.', and winepath ignores them completely.
+ func_stripname : : "$1"
+ func_to_host_path_tmp1=$func_stripname_result
+ func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
+ func_cygpath -u -p "$func_convert_core_path_wine_to_w32_result"
+ func_to_host_path_result="$func_cygpath_result"
+ func_convert_path_check : : \
+ "$func_to_host_path_tmp1" "$func_to_host_path_result"
+ func_convert_path_front_back_pathsep ":*" "*:" : "$1"
+ fi
+}
+# end func_convert_path_nix_to_cygwin
+
+
+# func_mode_compile arg...
+func_mode_compile ()
+{
+ $opt_debug
+ # Get the compilation command and the source file.
+ base_compile=
+ srcfile="$nonopt" # always keep a non-empty value in "srcfile"
+ suppress_opt=yes
+ suppress_output=
+ arg_mode=normal
+ libobj=
+ later=
+ pie_flag=
+
+ for arg
+ do
+ case $arg_mode in
+ arg )
+ # do not "continue". Instead, add this to base_compile
+ lastarg="$arg"
+ arg_mode=normal
+ ;;
+
+ target )
+ libobj="$arg"
+ arg_mode=normal
+ continue
+ ;;
+
+ normal )
+ # Accept any command-line options.
+ case $arg in
+ -o)
+ test -n "$libobj" && \
+ func_fatal_error "you cannot specify \`-o' more than once"
+ arg_mode=target
+ continue
+ ;;
+
+ -pie | -fpie | -fPIE)
+ func_append pie_flag " $arg"
+ continue
+ ;;
+
+ -shared | -static | -prefer-pic | -prefer-non-pic)
+ func_append later " $arg"
+ continue
+ ;;
+
+ -no-suppress)
+ suppress_opt=no
+ continue
+ ;;
+
+ -Xcompiler)
+ arg_mode=arg # the next one goes into the "base_compile" arg list
+ continue # The current "srcfile" will either be retained or
+ ;; # replaced later. I would guess that would be a bug.
+
+ -Wc,*)
+ func_stripname '-Wc,' '' "$arg"
+ args=$func_stripname_result
+ lastarg=
+ save_ifs="$IFS"; IFS=','
+ for arg in $args; do
+ IFS="$save_ifs"
+ func_append_quoted lastarg "$arg"
+ done
+ IFS="$save_ifs"
+ func_stripname ' ' '' "$lastarg"
+ lastarg=$func_stripname_result
+
+ # Add the arguments to base_compile.
+ func_append base_compile " $lastarg"
+ continue
+ ;;
+
+ *)
+ # Accept the current argument as the source file.
+ # The previous "srcfile" becomes the current argument.
+ #
+ lastarg="$srcfile"
+ srcfile="$arg"
+ ;;
+ esac # case $arg
+ ;;
+ esac # case $arg_mode
+
+ # Aesthetically quote the previous argument.
+ func_append_quoted base_compile "$lastarg"
+ done # for arg
+
+ case $arg_mode in
+ arg)
+ func_fatal_error "you must specify an argument for -Xcompile"
+ ;;
+ target)
+ func_fatal_error "you must specify a target with \`-o'"
+ ;;
+ *)
+ # Get the name of the library object.
+ test -z "$libobj" && {
+ func_basename "$srcfile"
+ libobj="$func_basename_result"
+ }
+ ;;
+ esac
+
+ # Recognize several different file suffixes.
+ # If the user specifies -o file.o, it is replaced with file.lo
+ case $libobj in
+ *.[cCFSifmso] | \
+ *.ada | *.adb | *.ads | *.asm | \
+ *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \
+ *.[fF][09]? | *.for | *.java | *.go | *.obj | *.sx | *.cu | *.cup)
+ func_xform "$libobj"
+ libobj=$func_xform_result
+ ;;
+ esac
+
+ case $libobj in
+ *.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;;
+ *)
+ func_fatal_error "cannot determine name of library object from \`$libobj'"
+ ;;
+ esac
+
+ func_infer_tag $base_compile
+
+ for arg in $later; do
+ case $arg in
+ -shared)
+ test "$build_libtool_libs" != yes && \
+ func_fatal_configuration "can not build a shared library"
+ build_old_libs=no
+ continue
+ ;;
+
+ -static)
+ build_libtool_libs=no
+ build_old_libs=yes
+ continue
+ ;;
+
+ -prefer-pic)
+ pic_mode=yes
+ continue
+ ;;
+
+ -prefer-non-pic)
+ pic_mode=no
+ continue
+ ;;
+ esac
+ done
+
+ func_quote_for_eval "$libobj"
+ test "X$libobj" != "X$func_quote_for_eval_result" \
+ && $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"' &()|`$[]' \
+ && func_warning "libobj name \`$libobj' may not contain shell special characters."
+ func_dirname_and_basename "$obj" "/" ""
+ objname="$func_basename_result"
+ xdir="$func_dirname_result"
+ lobj=${xdir}$objdir/$objname
+
+ test -z "$base_compile" && \
+ func_fatal_help "you must specify a compilation command"
+
+ # Delete any leftover library objects.
+ if test "$build_old_libs" = yes; then
+ removelist="$obj $lobj $libobj ${libobj}T"
+ else
+ removelist="$lobj $libobj ${libobj}T"
+ fi
+
+ # On Cygwin there's no "real" PIC flag so we must build both object types
+ case $host_os in
+ cygwin* | mingw* | pw32* | os2* | cegcc*)
+ pic_mode=default
+ ;;
+ esac
+ if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then
+ # non-PIC code in shared libraries is not supported
+ pic_mode=default
+ fi
+
+ # Calculate the filename of the output object if compiler does
+ # not support -o with -c
+ if test "$compiler_c_o" = no; then
+ output_obj=`$ECHO "$srcfile" | $SED 's%^.*/%%; s%\.[^.]*$%%'`.${objext}
+ lockfile="$output_obj.lock"
+ else
+ output_obj=
+ need_locks=no
+ lockfile=
+ fi
+
+ # Lock this critical section if it is needed
+ # We use this script file to make the link, it avoids creating a new file
+ if test "$need_locks" = yes; then
+ until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
+ func_echo "Waiting for $lockfile to be removed"
+ sleep 2
+ done
+ elif test "$need_locks" = warn; then
+ if test -f "$lockfile"; then
+ $ECHO "\
+*** ERROR, $lockfile exists and contains:
+`cat $lockfile 2>/dev/null`
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support \`-c' and \`-o' together. If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+ $opt_dry_run || $RM $removelist
+ exit $EXIT_FAILURE
+ fi
+ func_append removelist " $output_obj"
+ $ECHO "$srcfile" > "$lockfile"
+ fi
+
+ $opt_dry_run || $RM $removelist
+ func_append removelist " $lockfile"
+ trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15
+
+ func_to_tool_file "$srcfile" func_convert_file_msys_to_w32
+ srcfile=$func_to_tool_file_result
+ func_quote_for_eval "$srcfile"
+ qsrcfile=$func_quote_for_eval_result
+
+ # Only build a PIC object if we are building libtool libraries.
+ if test "$build_libtool_libs" = yes; then
+ # Without this assignment, base_compile gets emptied.
+ fbsd_hideous_sh_bug=$base_compile
+
+ if test "$pic_mode" != no; then
+ command="$base_compile $qsrcfile $pic_flag"
+ else
+ # Don't build PIC code
+ command="$base_compile $qsrcfile"
+ fi
+
+ func_mkdir_p "$xdir$objdir"
+
+ if test -z "$output_obj"; then
+ # Place PIC objects in $objdir
+ func_append command " -o $lobj"
+ fi
+
+ func_show_eval_locale "$command" \
+ 'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE'
+
+ if test "$need_locks" = warn &&
+ test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
+ $ECHO "\
+*** ERROR, $lockfile contains:
+`cat $lockfile 2>/dev/null`
+
+but it should contain:
+$srcfile
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support \`-c' and \`-o' together. If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+ $opt_dry_run || $RM $removelist
+ exit $EXIT_FAILURE
+ fi
+
+ # Just move the object if needed, then go on to compile the next one
+ if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then
+ func_show_eval '$MV "$output_obj" "$lobj"' \
+ 'error=$?; $opt_dry_run || $RM $removelist; exit $error'
+ fi
+
+ # Allow error messages only from the first compilation.
+ if test "$suppress_opt" = yes; then
+ suppress_output=' >/dev/null 2>&1'
+ fi
+ fi
+
+ # Only build a position-dependent object if we build old libraries.
+ if test "$build_old_libs" = yes; then
+ if test "$pic_mode" != yes; then
+ # Don't build PIC code
+ command="$base_compile $qsrcfile$pie_flag"
+ else
+ command="$base_compile $qsrcfile $pic_flag"
+ fi
+ if test "$compiler_c_o" = yes; then
+ func_append command " -o $obj"
+ fi
+
+ # Suppress compiler output if we already did a PIC compilation.
+ func_append command "$suppress_output"
+ func_show_eval_locale "$command" \
+ '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE'
+
+ if test "$need_locks" = warn &&
+ test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
+ $ECHO "\
+*** ERROR, $lockfile contains:
+`cat $lockfile 2>/dev/null`
+
+but it should contain:
+$srcfile
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support \`-c' and \`-o' together. If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+ $opt_dry_run || $RM $removelist
+ exit $EXIT_FAILURE
+ fi
+
+ # Just move the object if needed
+ if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then
+ func_show_eval '$MV "$output_obj" "$obj"' \
+ 'error=$?; $opt_dry_run || $RM $removelist; exit $error'
+ fi
+ fi
+
+ $opt_dry_run || {
+ func_write_libtool_object "$libobj" "$objdir/$objname" "$objname"
+
+ # Unlock the critical section if it was locked
+ if test "$need_locks" != no; then
+ removelist=$lockfile
+ $RM "$lockfile"
+ fi
+ }
+
+ exit $EXIT_SUCCESS
+}
+
+$opt_help || {
+ test "$opt_mode" = compile && func_mode_compile ${1+"$@"}
+}
+
+func_mode_help ()
+{
+ # We need to display help for each of the modes.
+ case $opt_mode in
+ "")
+ # Generic help is extracted from the usage comments
+ # at the start of this file.
+ func_help
+ ;;
+
+ clean)
+ $ECHO \
+"Usage: $progname [OPTION]... --mode=clean RM [RM-OPTION]... FILE...
+
+Remove files from the build directory.
+
+RM is the name of the program to use to delete files associated with each FILE
+(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed
+to RM.
+
+If FILE is a libtool library, object or program, all the files associated
+with it are deleted. Otherwise, only FILE itself is deleted using RM."
+ ;;
+
+ compile)
+ $ECHO \
+"Usage: $progname [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
+
+Compile a source file into a libtool library object.
+
+This mode accepts the following additional options:
+
+ -o OUTPUT-FILE set the output file name to OUTPUT-FILE
+ -no-suppress do not suppress compiler output for multiple passes
+ -prefer-pic try to build PIC objects only
+ -prefer-non-pic try to build non-PIC objects only
+ -shared do not build a \`.o' file suitable for static linking
+ -static only build a \`.o' file suitable for static linking
+ -Wc,FLAG pass FLAG directly to the compiler
+
+COMPILE-COMMAND is a command to be used in creating a \`standard' object file
+from the given SOURCEFILE.
+
+The output file name is determined by removing the directory component from
+SOURCEFILE, then substituting the C source code suffix \`.c' with the
+library object suffix, \`.lo'."
+ ;;
+
+ execute)
+ $ECHO \
+"Usage: $progname [OPTION]... --mode=execute COMMAND [ARGS]...
+
+Automatically set library path, then run a program.
+
+This mode accepts the following additional options:
+
+ -dlopen FILE add the directory containing FILE to the library path
+
+This mode sets the library path environment variable according to \`-dlopen'
+flags.
+
+If any of the ARGS are libtool executable wrappers, then they are translated
+into their corresponding uninstalled binary, and any of their required library
+directories are added to the library path.
+
+Then, COMMAND is executed, with ARGS as arguments."
+ ;;
+
+ finish)
+ $ECHO \
+"Usage: $progname [OPTION]... --mode=finish [LIBDIR]...
+
+Complete the installation of libtool libraries.
+
+Each LIBDIR is a directory that contains libtool libraries.
+
+The commands that this mode executes may require superuser privileges. Use
+the \`--dry-run' option if you just want to see what would be executed."
+ ;;
+
+ install)
+ $ECHO \
+"Usage: $progname [OPTION]... --mode=install INSTALL-COMMAND...
+
+Install executables or libraries.
+
+INSTALL-COMMAND is the installation command. The first component should be
+either the \`install' or \`cp' program.
+
+The following components of INSTALL-COMMAND are treated specially:
+
+ -inst-prefix-dir PREFIX-DIR Use PREFIX-DIR as a staging area for installation
+
+The rest of the components are interpreted as arguments to that command (only
+BSD-compatible install options are recognized)."
+ ;;
+
+ link)
+ $ECHO \
+"Usage: $progname [OPTION]... --mode=link LINK-COMMAND...
+
+Link object files or libraries together to form another library, or to
+create an executable program.
+
+LINK-COMMAND is a command using the C compiler that you would use to create
+a program from several object files.
+
+The following components of LINK-COMMAND are treated specially:
+
+ -all-static do not do any dynamic linking at all
+ -avoid-version do not add a version suffix if possible
+ -bindir BINDIR specify path to binaries directory (for systems where
+ libraries must be found in the PATH setting at runtime)
+ -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime
+ -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols
+ -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
+ -export-symbols SYMFILE
+ try to export only the symbols listed in SYMFILE
+ -export-symbols-regex REGEX
+ try to export only the symbols matching REGEX
+ -LLIBDIR search LIBDIR for required installed libraries
+ -lNAME OUTPUT-FILE requires the installed library libNAME
+ -module build a library that can dlopened
+ -no-fast-install disable the fast-install mode
+ -no-install link a not-installable executable
+ -no-undefined declare that a library does not refer to external symbols
+ -o OUTPUT-FILE create OUTPUT-FILE from the specified objects
+ -objectlist FILE Use a list of object files found in FILE to specify objects
+ -precious-files-regex REGEX
+ don't remove output files matching REGEX
+ -release RELEASE specify package release information
+ -rpath LIBDIR the created library will eventually be installed in LIBDIR
+ -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries
+ -shared only do dynamic linking of libtool libraries
+ -shrext SUFFIX override the standard shared library file extension
+ -static do not do any dynamic linking of uninstalled libtool libraries
+ -static-libtool-libs
+ do not do any dynamic linking of libtool libraries
+ -version-info CURRENT[:REVISION[:AGE]]
+ specify library version info [each variable defaults to 0]
+ -weak LIBNAME declare that the target provides the LIBNAME interface
+ -Wc,FLAG
+ -Xcompiler FLAG pass linker-specific FLAG directly to the compiler
+ -Wl,FLAG
+ -Xlinker FLAG pass linker-specific FLAG directly to the linker
+ -XCClinker FLAG pass link-specific FLAG to the compiler driver (CC)
+
+All other options (arguments beginning with \`-') are ignored.
+
+Every other argument is treated as a filename. Files ending in \`.la' are
+treated as uninstalled libtool libraries, other files are standard or library
+object files.
+
+If the OUTPUT-FILE ends in \`.la', then a libtool library is created,
+only library objects (\`.lo' files) may be specified, and \`-rpath' is
+required, except when creating a convenience library.
+
+If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created
+using \`ar' and \`ranlib', or on Windows using \`lib'.
+
+If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file
+is created, otherwise an executable program is created."
+ ;;
+
+ uninstall)
+ $ECHO \
+"Usage: $progname [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
+
+Remove libraries from an installation directory.
+
+RM is the name of the program to use to delete files associated with each FILE
+(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed
+to RM.
+
+If FILE is a libtool library, all the files associated with it are deleted.
+Otherwise, only FILE itself is deleted using RM."
+ ;;
+
+ *)
+ func_fatal_help "invalid operation mode \`$opt_mode'"
+ ;;
+ esac
+
+ echo
+ $ECHO "Try \`$progname --help' for more information about other modes."
+}
+
+# Now that we've collected a possible --mode arg, show help if necessary
+if $opt_help; then
+ if test "$opt_help" = :; then
+ func_mode_help
+ else
+ {
+ func_help noexit
+ for opt_mode in compile link execute install finish uninstall clean; do
+ func_mode_help
+ done
+ } | sed -n '1p; 2,$s/^Usage:/ or: /p'
+ {
+ func_help noexit
+ for opt_mode in compile link execute install finish uninstall clean; do
+ echo
+ func_mode_help
+ done
+ } |
+ sed '1d
+ /^When reporting/,/^Report/{
+ H
+ d
+ }
+ $x
+ /information about other modes/d
+ /more detailed .*MODE/d
+ s/^Usage:.*--mode=\([^ ]*\) .*/Description of \1 mode:/'
+ fi
+ exit $?
+fi
+
+
+# func_mode_execute arg...
+func_mode_execute ()
+{
+ $opt_debug
+ # The first argument is the command name.
+ cmd="$nonopt"
+ test -z "$cmd" && \
+ func_fatal_help "you must specify a COMMAND"
+
+ # Handle -dlopen flags immediately.
+ for file in $opt_dlopen; do
+ test -f "$file" \
+ || func_fatal_help "\`$file' is not a file"
+
+ dir=
+ case $file in
+ *.la)
+ func_resolve_sysroot "$file"
+ file=$func_resolve_sysroot_result
+
+ # Check to see that this really is a libtool archive.
+ func_lalib_unsafe_p "$file" \
+ || func_fatal_help "\`$lib' is not a valid libtool archive"
+
+ # Read the libtool library.
+ dlname=
+ library_names=
+ func_source "$file"
+
+ # Skip this library if it cannot be dlopened.
+ if test -z "$dlname"; then
+ # Warn if it was a shared library.
+ test -n "$library_names" && \
+ func_warning "\`$file' was not linked with \`-export-dynamic'"
+ continue
+ fi
+
+ func_dirname "$file" "" "."
+ dir="$func_dirname_result"
+
+ if test -f "$dir/$objdir/$dlname"; then
+ func_append dir "/$objdir"
+ else
+ if test ! -f "$dir/$dlname"; then
+ func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'"
+ fi
+ fi
+ ;;
+
+ *.lo)
+ # Just add the directory containing the .lo file.
+ func_dirname "$file" "" "."
+ dir="$func_dirname_result"
+ ;;
+
+ *)
+ func_warning "\`-dlopen' is ignored for non-libtool libraries and objects"
+ continue
+ ;;
+ esac
+
+ # Get the absolute pathname.
+ absdir=`cd "$dir" && pwd`
+ test -n "$absdir" && dir="$absdir"
+
+ # Now add the directory to shlibpath_var.
+ if eval "test -z \"\$$shlibpath_var\""; then
+ eval "$shlibpath_var=\"\$dir\""
+ else
+ eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""
+ fi
+ done
+
+ # This variable tells wrapper scripts just to set shlibpath_var
+ # rather than running their programs.
+ libtool_execute_magic="$magic"
+
+ # Check if any of the arguments is a wrapper script.
+ args=
+ for file
+ do
+ case $file in
+ -* | *.la | *.lo ) ;;
+ *)
+ # Do a test to see if this is really a libtool program.
+ if func_ltwrapper_script_p "$file"; then
+ func_source "$file"
+ # Transform arg to wrapped name.
+ file="$progdir/$program"
+ elif func_ltwrapper_executable_p "$file"; then
+ func_ltwrapper_scriptname "$file"
+ func_source "$func_ltwrapper_scriptname_result"
+ # Transform arg to wrapped name.
+ file="$progdir/$program"
+ fi
+ ;;
+ esac
+ # Quote arguments (to preserve shell metacharacters).
+ func_append_quoted args "$file"
+ done
+
+ if test "X$opt_dry_run" = Xfalse; then
+ if test -n "$shlibpath_var"; then
+ # Export the shlibpath_var.
+ eval "export $shlibpath_var"
+ fi
+
+ # Restore saved environment variables
+ for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
+ do
+ eval "if test \"\${save_$lt_var+set}\" = set; then
+ $lt_var=\$save_$lt_var; export $lt_var
+ else
+ $lt_unset $lt_var
+ fi"
+ done
+
+ # Now prepare to actually exec the command.
+ exec_cmd="\$cmd$args"
+ else
+ # Display what would be done.
+ if test -n "$shlibpath_var"; then
+ eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\""
+ echo "export $shlibpath_var"
+ fi
+ $ECHO "$cmd$args"
+ exit $EXIT_SUCCESS
+ fi
+}
+
+test "$opt_mode" = execute && func_mode_execute ${1+"$@"}
+
+
+# func_mode_finish arg...
+func_mode_finish ()
+{
+ $opt_debug
+ libs=
+ libdirs=
+ admincmds=
+
+ for opt in "$nonopt" ${1+"$@"}
+ do
+ if test -d "$opt"; then
+ func_append libdirs " $opt"
+
+ elif test -f "$opt"; then
+ if func_lalib_unsafe_p "$opt"; then
+ func_append libs " $opt"
+ else
+ func_warning "\`$opt' is not a valid libtool archive"
+ fi
+
+ else
+ func_fatal_error "invalid argument \`$opt'"
+ fi
+ done
+
+ if test -n "$libs"; then
+ if test -n "$lt_sysroot"; then
+ sysroot_regex=`$ECHO "$lt_sysroot" | $SED "$sed_make_literal_regex"`
+ sysroot_cmd="s/\([ ']\)$sysroot_regex/\1/g;"
+ else
+ sysroot_cmd=
+ fi
+
+ # Remove sysroot references
+ if $opt_dry_run; then
+ for lib in $libs; do
+ echo "removing references to $lt_sysroot and \`=' prefixes from $lib"
+ done
+ else
+ tmpdir=`func_mktempdir`
+ for lib in $libs; do
+ sed -e "${sysroot_cmd} s/\([ ']-[LR]\)=/\1/g; s/\([ ']\)=/\1/g" $lib \
+ > $tmpdir/tmp-la
+ mv -f $tmpdir/tmp-la $lib
+ done
+ ${RM}r "$tmpdir"
+ fi
+ fi
+
+ if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
+ for libdir in $libdirs; do
+ if test -n "$finish_cmds"; then
+ # Do each command in the finish commands.
+ func_execute_cmds "$finish_cmds" 'admincmds="$admincmds
+'"$cmd"'"'
+ fi
+ if test -n "$finish_eval"; then
+ # Do the single finish_eval.
+ eval cmds=\"$finish_eval\"
+ $opt_dry_run || eval "$cmds" || func_append admincmds "
+ $cmds"
+ fi
+ done
+ fi
+
+ # Exit here if they wanted silent mode.
+ $opt_silent && exit $EXIT_SUCCESS
+
+ if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
+ echo "----------------------------------------------------------------------"
+ echo "Libraries have been installed in:"
+ for libdir in $libdirs; do
+ $ECHO " $libdir"
+ done
+ echo
+ echo "If you ever happen to want to link against installed libraries"
+ echo "in a given directory, LIBDIR, you must either use libtool, and"
+ echo "specify the full pathname of the library, or use the \`-LLIBDIR'"
+ echo "flag during linking and do at least one of the following:"
+ if test -n "$shlibpath_var"; then
+ echo " - add LIBDIR to the \`$shlibpath_var' environment variable"
+ echo " during execution"
+ fi
+ if test -n "$runpath_var"; then
+ echo " - add LIBDIR to the \`$runpath_var' environment variable"
+ echo " during linking"
+ fi
+ if test -n "$hardcode_libdir_flag_spec"; then
+ libdir=LIBDIR
+ eval flag=\"$hardcode_libdir_flag_spec\"
+
+ $ECHO " - use the \`$flag' linker flag"
+ fi
+ if test -n "$admincmds"; then
+ $ECHO " - have your system administrator run these commands:$admincmds"
+ fi
+ if test -f /etc/ld.so.conf; then
+ echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
+ fi
+ echo
+
+ echo "See any operating system documentation about shared libraries for"
+ case $host in
+ solaris2.[6789]|solaris2.1[0-9])
+ echo "more information, such as the ld(1), crle(1) and ld.so(8) manual"
+ echo "pages."
+ ;;
+ *)
+ echo "more information, such as the ld(1) and ld.so(8) manual pages."
+ ;;
+ esac
+ echo "----------------------------------------------------------------------"
+ fi
+ exit $EXIT_SUCCESS
+}
+
+test "$opt_mode" = finish && func_mode_finish ${1+"$@"}
+
+
+# func_mode_install arg...
+func_mode_install ()
+{
+ $opt_debug
+ # There may be an optional sh(1) argument at the beginning of
+ # install_prog (especially on Windows NT).
+ if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
+ # Allow the use of GNU shtool's install command.
+ case $nonopt in *shtool*) :;; *) false;; esac; then
+ # Aesthetically quote it.
+ func_quote_for_eval "$nonopt"
+ install_prog="$func_quote_for_eval_result "
+ arg=$1
+ shift
+ else
+ install_prog=
+ arg=$nonopt
+ fi
+
+ # The real first argument should be the name of the installation program.
+ # Aesthetically quote it.
+ func_quote_for_eval "$arg"
+ func_append install_prog "$func_quote_for_eval_result"
+ install_shared_prog=$install_prog
+ case " $install_prog " in
+ *[\\\ /]cp\ *) install_cp=: ;;
+ *) install_cp=false ;;
+ esac
+
+ # We need to accept at least all the BSD install flags.
+ dest=
+ files=
+ opts=
+ prev=
+ install_type=
+ isdir=no
+ stripme=
+ no_mode=:
+ for arg
+ do
+ arg2=
+ if test -n "$dest"; then
+ func_append files " $dest"
+ dest=$arg
+ continue
+ fi
+
+ case $arg in
+ -d) isdir=yes ;;
+ -f)
+ if $install_cp; then :; else
+ prev=$arg
+ fi
+ ;;
+ -g | -m | -o)
+ prev=$arg
+ ;;
+ -s)
+ stripme=" -s"
+ continue
+ ;;
+ -*)
+ ;;
+ *)
+ # If the previous option needed an argument, then skip it.
+ if test -n "$prev"; then
+ if test "x$prev" = x-m && test -n "$install_override_mode"; then
+ arg2=$install_override_mode
+ no_mode=false
+ fi
+ prev=
+ else
+ dest=$arg
+ continue
+ fi
+ ;;
+ esac
+
+ # Aesthetically quote the argument.
+ func_quote_for_eval "$arg"
+ func_append install_prog " $func_quote_for_eval_result"
+ if test -n "$arg2"; then
+ func_quote_for_eval "$arg2"
+ fi
+ func_append install_shared_prog " $func_quote_for_eval_result"
+ done
+
+ test -z "$install_prog" && \
+ func_fatal_help "you must specify an install program"
+
+ test -n "$prev" && \
+ func_fatal_help "the \`$prev' option requires an argument"
+
+ if test -n "$install_override_mode" && $no_mode; then
+ if $install_cp; then :; else
+ func_quote_for_eval "$install_override_mode"
+ func_append install_shared_prog " -m $func_quote_for_eval_result"
+ fi
+ fi
+
+ if test -z "$files"; then
+ if test -z "$dest"; then
+ func_fatal_help "no file or destination specified"
+ else
+ func_fatal_help "you must specify a destination"
+ fi
+ fi
+
+ # Strip any trailing slash from the destination.
+ func_stripname '' '/' "$dest"
+ dest=$func_stripname_result
+
+ # Check to see that the destination is a directory.
+ test -d "$dest" && isdir=yes
+ if test "$isdir" = yes; then
+ destdir="$dest"
+ destname=
+ else
+ func_dirname_and_basename "$dest" "" "."
+ destdir="$func_dirname_result"
+ destname="$func_basename_result"
+
+ # Not a directory, so check to see that there is only one file specified.
+ set dummy $files; shift
+ test "$#" -gt 1 && \
+ func_fatal_help "\`$dest' is not a directory"
+ fi
+ case $destdir in
+ [\\/]* | [A-Za-z]:[\\/]*) ;;
+ *)
+ for file in $files; do
+ case $file in
+ *.lo) ;;
+ *)
+ func_fatal_help "\`$destdir' must be an absolute directory name"
+ ;;
+ esac
+ done
+ ;;
+ esac
+
+ # This variable tells wrapper scripts just to set variables rather
+ # than running their programs.
+ libtool_install_magic="$magic"
+
+ staticlibs=
+ future_libdirs=
+ current_libdirs=
+ for file in $files; do
+
+ # Do each installation.
+ case $file in
+ *.$libext)
+ # Do the static libraries later.
+ func_append staticlibs " $file"
+ ;;
+
+ *.la)
+ func_resolve_sysroot "$file"
+ file=$func_resolve_sysroot_result
+
+ # Check to see that this really is a libtool archive.
+ func_lalib_unsafe_p "$file" \
+ || func_fatal_help "\`$file' is not a valid libtool archive"
+
+ library_names=
+ old_library=
+ relink_command=
+ func_source "$file"
+
+ # Add the libdir to current_libdirs if it is the destination.
+ if test "X$destdir" = "X$libdir"; then
+ case "$current_libdirs " in
+ *" $libdir "*) ;;
+ *) func_append current_libdirs " $libdir" ;;
+ esac
+ else
+ # Note the libdir as a future libdir.
+ case "$future_libdirs " in
+ *" $libdir "*) ;;
+ *) func_append future_libdirs " $libdir" ;;
+ esac
+ fi
+
+ func_dirname "$file" "/" ""
+ dir="$func_dirname_result"
+ func_append dir "$objdir"
+
+ if test -n "$relink_command"; then
+ # Determine the prefix the user has applied to our future dir.
+ inst_prefix_dir=`$ECHO "$destdir" | $SED -e "s%$libdir\$%%"`
+
+ # Don't allow the user to place us outside of our expected
+ # location b/c this prevents finding dependent libraries that
+ # are installed to the same prefix.
+ # At present, this check doesn't affect windows .dll's that
+ # are installed into $libdir/../bin (currently, that works fine)
+ # but it's something to keep an eye on.
+ test "$inst_prefix_dir" = "$destdir" && \
+ func_fatal_error "error: cannot install \`$file' to a directory not ending in $libdir"
+
+ if test -n "$inst_prefix_dir"; then
+ # Stick the inst_prefix_dir data into the link command.
+ relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
+ else
+ relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%%"`
+ fi
+
+ func_warning "relinking \`$file'"
+ func_show_eval "$relink_command" \
+ 'func_fatal_error "error: relink \`$file'\'' with the above command before installing it"'
+ fi
+
+ # See the names of the shared library.
+ set dummy $library_names; shift
+ if test -n "$1"; then
+ realname="$1"
+ shift
+
+ srcname="$realname"
+ test -n "$relink_command" && srcname="$realname"T
+
+ # Install the shared library and build the symlinks.
+ func_show_eval "$install_shared_prog $dir/$srcname $destdir/$realname" \
+ 'exit $?'
+ tstripme="$stripme"
+ case $host_os in
+ cygwin* | mingw* | pw32* | cegcc*)
+ case $realname in
+ *.dll.a)
+ tstripme=""
+ ;;
+ esac
+ ;;
+ esac
+ if test -n "$tstripme" && test -n "$striplib"; then
+ func_show_eval "$striplib $destdir/$realname" 'exit $?'
+ fi
+
+ if test "$#" -gt 0; then
+ # Delete the old symlinks, and create new ones.
+ # Try `ln -sf' first, because the `ln' binary might depend on
+ # the symlink we replace! Solaris /bin/ln does not understand -f,
+ # so we also need to try rm && ln -s.
+ for linkname
+ do
+ test "$linkname" != "$realname" \
+ && func_show_eval "(cd $destdir && { $LN_S -f $realname $linkname || { $RM $linkname && $LN_S $realname $linkname; }; })"
+ done
+ fi
+
+ # Do each command in the postinstall commands.
+ lib="$destdir/$realname"
+ func_execute_cmds "$postinstall_cmds" 'exit $?'
+ fi
+
+ # Install the pseudo-library for information purposes.
+ func_basename "$file"
+ name="$func_basename_result"
+ instname="$dir/$name"i
+ func_show_eval "$install_prog $instname $destdir/$name" 'exit $?'
+
+ # Maybe install the static library, too.
+ test -n "$old_library" && func_append staticlibs " $dir/$old_library"
+ ;;
+
+ *.lo)
+ # Install (i.e. copy) a libtool object.
+
+ # Figure out destination file name, if it wasn't already specified.
+ if test -n "$destname"; then
+ destfile="$destdir/$destname"
+ else
+ func_basename "$file"
+ destfile="$func_basename_result"
+ destfile="$destdir/$destfile"
+ fi
+
+ # Deduce the name of the destination old-style object file.
+ case $destfile in
+ *.lo)
+ func_lo2o "$destfile"
+ staticdest=$func_lo2o_result
+ ;;
+ *.$objext)
+ staticdest="$destfile"
+ destfile=
+ ;;
+ *)
+ func_fatal_help "cannot copy a libtool object to \`$destfile'"
+ ;;
+ esac
+
+ # Install the libtool object if requested.
+ test -n "$destfile" && \
+ func_show_eval "$install_prog $file $destfile" 'exit $?'
+
+ # Install the old object if enabled.
+ if test "$build_old_libs" = yes; then
+ # Deduce the name of the old-style object file.
+ func_lo2o "$file"
+ staticobj=$func_lo2o_result
+ func_show_eval "$install_prog \$staticobj \$staticdest" 'exit $?'
+ fi
+ exit $EXIT_SUCCESS
+ ;;
+
+ *)
+ # Figure out destination file name, if it wasn't already specified.
+ if test -n "$destname"; then
+ destfile="$destdir/$destname"
+ else
+ func_basename "$file"
+ destfile="$func_basename_result"
+ destfile="$destdir/$destfile"
+ fi
+
+ # If the file is missing, and there is a .exe on the end, strip it
+ # because it is most likely a libtool script we actually want to
+ # install
+ stripped_ext=""
+ case $file in
+ *.exe)
+ if test ! -f "$file"; then
+ func_stripname '' '.exe' "$file"
+ file=$func_stripname_result
+ stripped_ext=".exe"
+ fi
+ ;;
+ esac
+
+ # Do a test to see if this is really a libtool program.
+ case $host in
+ *cygwin* | *mingw*)
+ if func_ltwrapper_executable_p "$file"; then
+ func_ltwrapper_scriptname "$file"
+ wrapper=$func_ltwrapper_scriptname_result
+ else
+ func_stripname '' '.exe' "$file"
+ wrapper=$func_stripname_result
+ fi
+ ;;
+ *)
+ wrapper=$file
+ ;;
+ esac
+ if func_ltwrapper_script_p "$wrapper"; then
+ notinst_deplibs=
+ relink_command=
+
+ func_source "$wrapper"
+
+ # Check the variables that should have been set.
+ test -z "$generated_by_libtool_version" && \
+ func_fatal_error "invalid libtool wrapper script \`$wrapper'"
+
+ finalize=yes
+ for lib in $notinst_deplibs; do
+ # Check to see that each library is installed.
+ libdir=
+ if test -f "$lib"; then
+ func_source "$lib"
+ fi
+ libfile="$libdir/"`$ECHO "$lib" | $SED 's%^.*/%%g'` ### testsuite: skip nested quoting test
+ if test -n "$libdir" && test ! -f "$libfile"; then
+ func_warning "\`$lib' has not been installed in \`$libdir'"
+ finalize=no
+ fi
+ done
+
+ relink_command=
+ func_source "$wrapper"
+
+ outputname=
+ if test "$fast_install" = no && test -n "$relink_command"; then
+ $opt_dry_run || {
+ if test "$finalize" = yes; then
+ tmpdir=`func_mktempdir`
+ func_basename "$file$stripped_ext"
+ file="$func_basename_result"
+ outputname="$tmpdir/$file"
+ # Replace the output file specification.
+ relink_command=`$ECHO "$relink_command" | $SED 's%@OUTPUT@%'"$outputname"'%g'`
+
+ $opt_silent || {
+ func_quote_for_expand "$relink_command"
+ eval "func_echo $func_quote_for_expand_result"
+ }
+ if eval "$relink_command"; then :
+ else
+ func_error "error: relink \`$file' with the above command before installing it"
+ $opt_dry_run || ${RM}r "$tmpdir"
+ continue
+ fi
+ file="$outputname"
+ else
+ func_warning "cannot relink \`$file'"
+ fi
+ }
+ else
+ # Install the binary that we compiled earlier.
+ file=`$ECHO "$file$stripped_ext" | $SED "s%\([^/]*\)$%$objdir/\1%"`
+ fi
+ fi
+
+ # remove .exe since cygwin /usr/bin/install will append another
+ # one anyway
+ case $install_prog,$host in
+ */usr/bin/install*,*cygwin*)
+ case $file:$destfile in
+ *.exe:*.exe)
+ # this is ok
+ ;;
+ *.exe:*)
+ destfile=$destfile.exe
+ ;;
+ *:*.exe)
+ func_stripname '' '.exe' "$destfile"
+ destfile=$func_stripname_result
+ ;;
+ esac
+ ;;
+ esac
+ func_show_eval "$install_prog\$stripme \$file \$destfile" 'exit $?'
+ $opt_dry_run || if test -n "$outputname"; then
+ ${RM}r "$tmpdir"
+ fi
+ ;;
+ esac
+ done
+
+ for file in $staticlibs; do
+ func_basename "$file"
+ name="$func_basename_result"
+
+ # Set up the ranlib parameters.
+ oldlib="$destdir/$name"
+ func_to_tool_file "$oldlib" func_convert_file_msys_to_w32
+ tool_oldlib=$func_to_tool_file_result
+
+ func_show_eval "$install_prog \$file \$oldlib" 'exit $?'
+
+ if test -n "$stripme" && test -n "$old_striplib"; then
+ func_show_eval "$old_striplib $tool_oldlib" 'exit $?'
+ fi
+
+ # Do each command in the postinstall commands.
+ func_execute_cmds "$old_postinstall_cmds" 'exit $?'
+ done
+
+ test -n "$future_libdirs" && \
+ func_warning "remember to run \`$progname --finish$future_libdirs'"
+
+ if test -n "$current_libdirs"; then
+ # Maybe just do a dry run.
+ $opt_dry_run && current_libdirs=" -n$current_libdirs"
+ exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs'
+ else
+ exit $EXIT_SUCCESS
+ fi
+}
+
+test "$opt_mode" = install && func_mode_install ${1+"$@"}
+
+
+# func_generate_dlsyms outputname originator pic_p
+# Extract symbols from dlprefiles and create ${outputname}S.o with
+# a dlpreopen symbol table.
+func_generate_dlsyms ()
+{
+ $opt_debug
+ my_outputname="$1"
+ my_originator="$2"
+ my_pic_p="${3-no}"
+ my_prefix=`$ECHO "$my_originator" | sed 's%[^a-zA-Z0-9]%_%g'`
+ my_dlsyms=
+
+ if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+ if test -n "$NM" && test -n "$global_symbol_pipe"; then
+ my_dlsyms="${my_outputname}S.c"
+ else
+ func_error "not configured to extract global symbols from dlpreopened files"
+ fi
+ fi
+
+ if test -n "$my_dlsyms"; then
+ case $my_dlsyms in
+ "") ;;
+ *.c)
+ # Discover the nlist of each of the dlfiles.
+ nlist="$output_objdir/${my_outputname}.nm"
+
+ func_show_eval "$RM $nlist ${nlist}S ${nlist}T"
+
+ # Parse the name list into a source file.
+ func_verbose "creating $output_objdir/$my_dlsyms"
+
+ $opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\
+/* $my_dlsyms - symbol resolution table for \`$my_outputname' dlsym emulation. */
+/* Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION */
+
+#ifdef __cplusplus
+extern \"C\" {
+#endif
+
+#if defined(__GNUC__) && (((__GNUC__ == 4) && (__GNUC_MINOR__ >= 4)) || (__GNUC__ > 4))
+#pragma GCC diagnostic ignored \"-Wstrict-prototypes\"
+#endif
+
+/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */
+#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
+/* DATA imports from DLLs on WIN32 con't be const, because runtime
+ relocations are performed -- see ld's documentation on pseudo-relocs. */
+# define LT_DLSYM_CONST
+#elif defined(__osf__)
+/* This system does not cope well with relocations in const data. */
+# define LT_DLSYM_CONST
+#else
+# define LT_DLSYM_CONST const
+#endif
+
+/* External symbol declarations for the compiler. */\
+"
+
+ if test "$dlself" = yes; then
+ func_verbose "generating symbol list for \`$output'"
+
+ $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist"
+
+ # Add our own program objects to the symbol list.
+ progfiles=`$ECHO "$objs$old_deplibs" | $SP2NL | $SED "$lo2o" | $NL2SP`
+ for progfile in $progfiles; do
+ func_to_tool_file "$progfile" func_convert_file_msys_to_w32
+ func_verbose "extracting global C symbols from \`$func_to_tool_file_result'"
+ $opt_dry_run || eval "$NM $func_to_tool_file_result | $global_symbol_pipe >> '$nlist'"
+ done
+
+ if test -n "$exclude_expsyms"; then
+ $opt_dry_run || {
+ eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
+ eval '$MV "$nlist"T "$nlist"'
+ }
+ fi
+
+ if test -n "$export_symbols_regex"; then
+ $opt_dry_run || {
+ eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T'
+ eval '$MV "$nlist"T "$nlist"'
+ }
+ fi
+
+ # Prepare the list of exported symbols
+ if test -z "$export_symbols"; then
+ export_symbols="$output_objdir/$outputname.exp"
+ $opt_dry_run || {
+ $RM $export_symbols
+ eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
+ case $host in
+ *cygwin* | *mingw* | *cegcc* )
+ eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
+ eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"'
+ ;;
+ esac
+ }
+ else
+ $opt_dry_run || {
+ eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
+ eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
+ eval '$MV "$nlist"T "$nlist"'
+ case $host in
+ *cygwin* | *mingw* | *cegcc* )
+ eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
+ eval 'cat "$nlist" >> "$output_objdir/$outputname.def"'
+ ;;
+ esac
+ }
+ fi
+ fi
+
+ for dlprefile in $dlprefiles; do
+ func_verbose "extracting global C symbols from \`$dlprefile'"
+ func_basename "$dlprefile"
+ name="$func_basename_result"
+ case $host in
+ *cygwin* | *mingw* | *cegcc* )
+ # if an import library, we need to obtain dlname
+ if func_win32_import_lib_p "$dlprefile"; then
+ func_tr_sh "$dlprefile"
+ eval "curr_lafile=\$libfile_$func_tr_sh_result"
+ dlprefile_dlbasename=""
+ if test -n "$curr_lafile" && func_lalib_p "$curr_lafile"; then
+ # Use subshell, to avoid clobbering current variable values
+ dlprefile_dlname=`source "$curr_lafile" && echo "$dlname"`
+ if test -n "$dlprefile_dlname" ; then
+ func_basename "$dlprefile_dlname"
+ dlprefile_dlbasename="$func_basename_result"
+ else
+ # no lafile. user explicitly requested -dlpreopen <import library>.
+ $sharedlib_from_linklib_cmd "$dlprefile"
+ dlprefile_dlbasename=$sharedlib_from_linklib_result
+ fi
+ fi
+ $opt_dry_run || {
+ if test -n "$dlprefile_dlbasename" ; then
+ eval '$ECHO ": $dlprefile_dlbasename" >> "$nlist"'
+ else
+ func_warning "Could not compute DLL name from $name"
+ eval '$ECHO ": $name " >> "$nlist"'
+ fi
+ func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
+ eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe |
+ $SED -e '/I __imp/d' -e 's/I __nm_/D /;s/_nm__//' >> '$nlist'"
+ }
+ else # not an import lib
+ $opt_dry_run || {
+ eval '$ECHO ": $name " >> "$nlist"'
+ func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
+ eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'"
+ }
+ fi
+ ;;
+ *)
+ $opt_dry_run || {
+ eval '$ECHO ": $name " >> "$nlist"'
+ func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
+ eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'"
+ }
+ ;;
+ esac
+ done
+
+ $opt_dry_run || {
+ # Make sure we have at least an empty file.
+ test -f "$nlist" || : > "$nlist"
+
+ if test -n "$exclude_expsyms"; then
+ $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
+ $MV "$nlist"T "$nlist"
+ fi
+
+ # Try sorting and uniquifying the output.
+ if $GREP -v "^: " < "$nlist" |
+ if sort -k 3 </dev/null >/dev/null 2>&1; then
+ sort -k 3
+ else
+ sort +2
+ fi |
+ uniq > "$nlist"S; then
+ :
+ else
+ $GREP -v "^: " < "$nlist" > "$nlist"S
+ fi
+
+ if test -f "$nlist"S; then
+ eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"'
+ else
+ echo '/* NONE */' >> "$output_objdir/$my_dlsyms"
+ fi
+
+ echo >> "$output_objdir/$my_dlsyms" "\
+
+/* The mapping between symbol names and symbols. */
+typedef struct {
+ const char *name;
+ void *address;
+} lt_dlsymlist;
+extern LT_DLSYM_CONST lt_dlsymlist
+lt_${my_prefix}_LTX_preloaded_symbols[];
+LT_DLSYM_CONST lt_dlsymlist
+lt_${my_prefix}_LTX_preloaded_symbols[] =
+{\
+ { \"$my_originator\", (void *) 0 },"
+
+ case $need_lib_prefix in
+ no)
+ eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$my_dlsyms"
+ ;;
+ *)
+ eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms"
+ ;;
+ esac
+ echo >> "$output_objdir/$my_dlsyms" "\
+ {0, (void *) 0}
+};
+
+/* This works around a problem in FreeBSD linker */
+#ifdef FREEBSD_WORKAROUND
+static const void *lt_preloaded_setup() {
+ return lt_${my_prefix}_LTX_preloaded_symbols;
+}
+#endif
+
+#ifdef __cplusplus
+}
+#endif\
+"
+ } # !$opt_dry_run
+
+ pic_flag_for_symtable=
+ case "$compile_command " in
+ *" -static "*) ;;
+ *)
+ case $host in
+ # compiling the symbol table file with pic_flag works around
+ # a FreeBSD bug that causes programs to crash when -lm is
+ # linked before any other PIC object. But we must not use
+ # pic_flag when linking with -static. The problem exists in
+ # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
+ *-*-freebsd2.*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
+ pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;;
+ *-*-hpux*)
+ pic_flag_for_symtable=" $pic_flag" ;;
+ *)
+ if test "X$my_pic_p" != Xno; then
+ pic_flag_for_symtable=" $pic_flag"
+ fi
+ ;;
+ esac
+ ;;
+ esac
+ symtab_cflags=
+ for arg in $LTCFLAGS; do
+ case $arg in
+ -pie | -fpie | -fPIE) ;;
+ *) func_append symtab_cflags " $arg" ;;
+ esac
+ done
+
+ # Now compile the dynamic symbol file.
+ func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?'
+
+ # Clean up the generated files.
+ func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T"'
+
+ # Transform the symbol file into the correct name.
+ symfileobj="$output_objdir/${my_outputname}S.$objext"
+ case $host in
+ *cygwin* | *mingw* | *cegcc* )
+ if test -f "$output_objdir/$my_outputname.def"; then
+ compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
+ finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
+ else
+ compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"`
+ finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"`
+ fi
+ ;;
+ *)
+ compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"`
+ finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"`
+ ;;
+ esac
+ ;;
+ *)
+ func_fatal_error "unknown suffix for \`$my_dlsyms'"
+ ;;
+ esac
+ else
+ # We keep going just in case the user didn't refer to
+ # lt_preloaded_symbols. The linker will fail if global_symbol_pipe
+ # really was required.
+
+ # Nullify the symbol file.
+ compile_command=`$ECHO "$compile_command" | $SED "s% @SYMFILE@%%"`
+ finalize_command=`$ECHO "$finalize_command" | $SED "s% @SYMFILE@%%"`
+ fi
+}
+
+# func_win32_libid arg
+# return the library type of file 'arg'
+#
+# Need a lot of goo to handle *both* DLLs and import libs
+# Has to be a shell function in order to 'eat' the argument
+# that is supplied when $file_magic_command is called.
+# Despite the name, also deal with 64 bit binaries.
+func_win32_libid ()
+{
+ $opt_debug
+ win32_libid_type="unknown"
+ win32_fileres=`file -L $1 2>/dev/null`
+ case $win32_fileres in
+ *ar\ archive\ import\ library*) # definitely import
+ win32_libid_type="x86 archive import"
+ ;;
+ *ar\ archive*) # could be an import, or static
+ # Keep the egrep pattern in sync with the one in _LT_CHECK_MAGIC_METHOD.
+ if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null |
+ $EGREP 'file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' >/dev/null; then
+ func_to_tool_file "$1" func_convert_file_msys_to_w32
+ win32_nmres=`eval $NM -f posix -A \"$func_to_tool_file_result\" |
+ $SED -n -e '
+ 1,100{
+ / I /{
+ s,.*,import,
+ p
+ q
+ }
+ }'`
+ case $win32_nmres in
+ import*) win32_libid_type="x86 archive import";;
+ *) win32_libid_type="x86 archive static";;
+ esac
+ fi
+ ;;
+ *DLL*)
+ win32_libid_type="x86 DLL"
+ ;;
+ *executable*) # but shell scripts are "executable" too...
+ case $win32_fileres in
+ *MS\ Windows\ PE\ Intel*)
+ win32_libid_type="x86 DLL"
+ ;;
+ esac
+ ;;
+ esac
+ $ECHO "$win32_libid_type"
+}
+
+# func_cygming_dll_for_implib ARG
+#
+# Platform-specific function to extract the
+# name of the DLL associated with the specified
+# import library ARG.
+# Invoked by eval'ing the libtool variable
+# $sharedlib_from_linklib_cmd
+# Result is available in the variable
+# $sharedlib_from_linklib_result
+func_cygming_dll_for_implib ()
+{
+ $opt_debug
+ sharedlib_from_linklib_result=`$DLLTOOL --identify-strict --identify "$1"`
+}
+
+# func_cygming_dll_for_implib_fallback_core SECTION_NAME LIBNAMEs
+#
+# The is the core of a fallback implementation of a
+# platform-specific function to extract the name of the
+# DLL associated with the specified import library LIBNAME.
+#
+# SECTION_NAME is either .idata$6 or .idata$7, depending
+# on the platform and compiler that created the implib.
+#
+# Echos the name of the DLL associated with the
+# specified import library.
+func_cygming_dll_for_implib_fallback_core ()
+{
+ $opt_debug
+ match_literal=`$ECHO "$1" | $SED "$sed_make_literal_regex"`
+ $OBJDUMP -s --section "$1" "$2" 2>/dev/null |
+ $SED '/^Contents of section '"$match_literal"':/{
+ # Place marker at beginning of archive member dllname section
+ s/.*/====MARK====/
+ p
+ d
+ }
+ # These lines can sometimes be longer than 43 characters, but
+ # are always uninteresting
+ /:[ ]*file format pe[i]\{,1\}-/d
+ /^In archive [^:]*:/d
+ # Ensure marker is printed
+ /^====MARK====/p
+ # Remove all lines with less than 43 characters
+ /^.\{43\}/!d
+ # From remaining lines, remove first 43 characters
+ s/^.\{43\}//' |
+ $SED -n '
+ # Join marker and all lines until next marker into a single line
+ /^====MARK====/ b para
+ H
+ $ b para
+ b
+ :para
+ x
+ s/\n//g
+ # Remove the marker
+ s/^====MARK====//
+ # Remove trailing dots and whitespace
+ s/[\. \t]*$//
+ # Print
+ /./p' |
+ # we now have a list, one entry per line, of the stringified
+ # contents of the appropriate section of all members of the
+ # archive which possess that section. Heuristic: eliminate
+ # all those which have a first or second character that is
+ # a '.' (that is, objdump's representation of an unprintable
+ # character.) This should work for all archives with less than
+ # 0x302f exports -- but will fail for DLLs whose name actually
+ # begins with a literal '.' or a single character followed by
+ # a '.'.
+ #
+ # Of those that remain, print the first one.
+ $SED -e '/^\./d;/^.\./d;q'
+}
+
+# func_cygming_gnu_implib_p ARG
+# This predicate returns with zero status (TRUE) if
+# ARG is a GNU/binutils-style import library. Returns
+# with nonzero status (FALSE) otherwise.
+func_cygming_gnu_implib_p ()
+{
+ $opt_debug
+ func_to_tool_file "$1" func_convert_file_msys_to_w32
+ func_cygming_gnu_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $EGREP ' (_head_[A-Za-z0-9_]+_[ad]l*|[A-Za-z0-9_]+_[ad]l*_iname)$'`
+ test -n "$func_cygming_gnu_implib_tmp"
+}
+
+# func_cygming_ms_implib_p ARG
+# This predicate returns with zero status (TRUE) if
+# ARG is an MS-style import library. Returns
+# with nonzero status (FALSE) otherwise.
+func_cygming_ms_implib_p ()
+{
+ $opt_debug
+ func_to_tool_file "$1" func_convert_file_msys_to_w32
+ func_cygming_ms_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $GREP '_NULL_IMPORT_DESCRIPTOR'`
+ test -n "$func_cygming_ms_implib_tmp"
+}
+
+# func_cygming_dll_for_implib_fallback ARG
+# Platform-specific function to extract the
+# name of the DLL associated with the specified
+# import library ARG.
+#
+# This fallback implementation is for use when $DLLTOOL
+# does not support the --identify-strict option.
+# Invoked by eval'ing the libtool variable
+# $sharedlib_from_linklib_cmd
+# Result is available in the variable
+# $sharedlib_from_linklib_result
+func_cygming_dll_for_implib_fallback ()
+{
+ $opt_debug
+ if func_cygming_gnu_implib_p "$1" ; then
+ # binutils import library
+ sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$7' "$1"`
+ elif func_cygming_ms_implib_p "$1" ; then
+ # ms-generated import library
+ sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$6' "$1"`
+ else
+ # unknown
+ sharedlib_from_linklib_result=""
+ fi
+}
+
+
+# func_extract_an_archive dir oldlib
+func_extract_an_archive ()
+{
+ $opt_debug
+ f_ex_an_ar_dir="$1"; shift
+ f_ex_an_ar_oldlib="$1"
+ if test "$lock_old_archive_extraction" = yes; then
+ lockfile=$f_ex_an_ar_oldlib.lock
+ until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
+ func_echo "Waiting for $lockfile to be removed"
+ sleep 2
+ done
+ fi
+ func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" \
+ 'stat=$?; rm -f "$lockfile"; exit $stat'
+ if test "$lock_old_archive_extraction" = yes; then
+ $opt_dry_run || rm -f "$lockfile"
+ fi
+ if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
+ :
+ else
+ func_fatal_error "object name conflicts in archive: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib"
+ fi
+}
+
+
+# func_extract_archives gentop oldlib ...
+func_extract_archives ()
+{
+ $opt_debug
+ my_gentop="$1"; shift
+ my_oldlibs=${1+"$@"}
+ my_oldobjs=""
+ my_xlib=""
+ my_xabs=""
+ my_xdir=""
+
+ for my_xlib in $my_oldlibs; do
+ # Extract the objects.
+ case $my_xlib in
+ [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;;
+ *) my_xabs=`pwd`"/$my_xlib" ;;
+ esac
+ func_basename "$my_xlib"
+ my_xlib="$func_basename_result"
+ my_xlib_u=$my_xlib
+ while :; do
+ case " $extracted_archives " in
+ *" $my_xlib_u "*)
+ func_arith $extracted_serial + 1
+ extracted_serial=$func_arith_result
+ my_xlib_u=lt$extracted_serial-$my_xlib ;;
+ *) break ;;
+ esac
+ done
+ extracted_archives="$extracted_archives $my_xlib_u"
+ my_xdir="$my_gentop/$my_xlib_u"
+
+ func_mkdir_p "$my_xdir"
+
+ case $host in
+ *-darwin*)
+ func_verbose "Extracting $my_xabs"
+ # Do not bother doing anything if just a dry run
+ $opt_dry_run || {
+ darwin_orig_dir=`pwd`
+ cd $my_xdir || exit $?
+ darwin_archive=$my_xabs
+ darwin_curdir=`pwd`
+ darwin_base_archive=`basename "$darwin_archive"`
+ darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true`
+ if test -n "$darwin_arches"; then
+ darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'`
+ darwin_arch=
+ func_verbose "$darwin_base_archive has multiple architectures $darwin_arches"
+ for darwin_arch in $darwin_arches ; do
+ func_mkdir_p "unfat-$$/${darwin_base_archive}-${darwin_arch}"
+ $LIPO -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}"
+ cd "unfat-$$/${darwin_base_archive}-${darwin_arch}"
+ func_extract_an_archive "`pwd`" "${darwin_base_archive}"
+ cd "$darwin_curdir"
+ $RM "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}"
+ done # $darwin_arches
+ ## Okay now we've a bunch of thin objects, gotta fatten them up :)
+ darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$basename" | sort -u`
+ darwin_file=
+ darwin_files=
+ for darwin_file in $darwin_filelist; do
+ darwin_files=`find unfat-$$ -name $darwin_file -print | sort | $NL2SP`
+ $LIPO -create -output "$darwin_file" $darwin_files
+ done # $darwin_filelist
+ $RM -rf unfat-$$
+ cd "$darwin_orig_dir"
+ else
+ cd $darwin_orig_dir
+ func_extract_an_archive "$my_xdir" "$my_xabs"
+ fi # $darwin_arches
+ } # !$opt_dry_run
+ ;;
+ *)
+ func_extract_an_archive "$my_xdir" "$my_xabs"
+ ;;
+ esac
+ my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | sort | $NL2SP`
+ done
+
+ func_extract_archives_result="$my_oldobjs"
+}
+
+
+# func_emit_wrapper [arg=no]
+#
+# Emit a libtool wrapper script on stdout.
+# Don't directly open a file because we may want to
+# incorporate the script contents within a cygwin/mingw
+# wrapper executable. Must ONLY be called from within
+# func_mode_link because it depends on a number of variables
+# set therein.
+#
+# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR
+# variable will take. If 'yes', then the emitted script
+# will assume that the directory in which it is stored is
+# the $objdir directory. This is a cygwin/mingw-specific
+# behavior.
+func_emit_wrapper ()
+{
+ func_emit_wrapper_arg1=${1-no}
+
+ $ECHO "\
+#! $SHELL
+
+# $output - temporary wrapper script for $objdir/$outputname
+# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+#
+# The $output program cannot be directly executed until all the libtool
+# libraries that it depends on are installed.
+#
+# This wrapper script should never be moved out of the build directory.
+# If it is, it will not operate correctly.
+
+# Sed substitution that helps us do robust quoting. It backslashifies
+# metacharacters that are still active within double-quoted strings.
+sed_quote_subst='$sed_quote_subst'
+
+# Be Bourne compatible
+if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then
+ emulate sh
+ NULLCMD=:
+ # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '\${1+\"\$@\"}'='\"\$@\"'
+ setopt NO_GLOB_SUBST
+else
+ case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac
+fi
+BIN_SH=xpg4; export BIN_SH # for Tru64
+DUALCASE=1; export DUALCASE # for MKS sh
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+relink_command=\"$relink_command\"
+
+# This environment variable determines our operation mode.
+if test \"\$libtool_install_magic\" = \"$magic\"; then
+ # install mode needs the following variables:
+ generated_by_libtool_version='$macro_version'
+ notinst_deplibs='$notinst_deplibs'
+else
+ # When we are sourced in execute mode, \$file and \$ECHO are already set.
+ if test \"\$libtool_execute_magic\" != \"$magic\"; then
+ file=\"\$0\""
+
+ qECHO=`$ECHO "$ECHO" | $SED "$sed_quote_subst"`
+ $ECHO "\
+
+# A function that is used when there is no print builtin or printf.
+func_fallback_echo ()
+{
+ eval 'cat <<_LTECHO_EOF
+\$1
+_LTECHO_EOF'
+}
+ ECHO=\"$qECHO\"
+ fi
+
+# Very basic option parsing. These options are (a) specific to
+# the libtool wrapper, (b) are identical between the wrapper
+# /script/ and the wrapper /executable/ which is used only on
+# windows platforms, and (c) all begin with the string "--lt-"
+# (application programs are unlikely to have options which match
+# this pattern).
+#
+# There are only two supported options: --lt-debug and
+# --lt-dump-script. There is, deliberately, no --lt-help.
+#
+# The first argument to this parsing function should be the
+# script's $0 value, followed by "$@".
+lt_option_debug=
+func_parse_lt_options ()
+{
+ lt_script_arg0=\$0
+ shift
+ for lt_opt
+ do
+ case \"\$lt_opt\" in
+ --lt-debug) lt_option_debug=1 ;;
+ --lt-dump-script)
+ lt_dump_D=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%/[^/]*$%%'\`
+ test \"X\$lt_dump_D\" = \"X\$lt_script_arg0\" && lt_dump_D=.
+ lt_dump_F=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%^.*/%%'\`
+ cat \"\$lt_dump_D/\$lt_dump_F\"
+ exit 0
+ ;;
+ --lt-*)
+ \$ECHO \"Unrecognized --lt- option: '\$lt_opt'\" 1>&2
+ exit 1
+ ;;
+ esac
+ done
+
+ # Print the debug banner immediately:
+ if test -n \"\$lt_option_debug\"; then
+ echo \"${outputname}:${output}:\${LINENO}: libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\" 1>&2
+ fi
+}
+
+# Used when --lt-debug. Prints its arguments to stdout
+# (redirection is the responsibility of the caller)
+func_lt_dump_args ()
+{
+ lt_dump_args_N=1;
+ for lt_arg
+ do
+ \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[\$lt_dump_args_N]: \$lt_arg\"
+ lt_dump_args_N=\`expr \$lt_dump_args_N + 1\`
+ done
+}
+
+# Core function for launching the target application
+func_exec_program_core ()
+{
+"
+ case $host in
+ # Backslashes separate directories on plain windows
+ *-*-mingw | *-*-os2* | *-cegcc*)
+ $ECHO "\
+ if test -n \"\$lt_option_debug\"; then
+ \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir\\\\\$program\" 1>&2
+ func_lt_dump_args \${1+\"\$@\"} 1>&2
+ fi
+ exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
+"
+ ;;
+
+ *)
+ $ECHO "\
+ if test -n \"\$lt_option_debug\"; then
+ \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir/\$program\" 1>&2
+ func_lt_dump_args \${1+\"\$@\"} 1>&2
+ fi
+ exec \"\$progdir/\$program\" \${1+\"\$@\"}
+"
+ ;;
+ esac
+ $ECHO "\
+ \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2
+ exit 1
+}
+
+# A function to encapsulate launching the target application
+# Strips options in the --lt-* namespace from \$@ and
+# launches target application with the remaining arguments.
+func_exec_program ()
+{
+ case \" \$* \" in
+ *\\ --lt-*)
+ for lt_wr_arg
+ do
+ case \$lt_wr_arg in
+ --lt-*) ;;
+ *) set x \"\$@\" \"\$lt_wr_arg\"; shift;;
+ esac
+ shift
+ done ;;
+ esac
+ func_exec_program_core \${1+\"\$@\"}
+}
+
+ # Parse options
+ func_parse_lt_options \"\$0\" \${1+\"\$@\"}
+
+ # Find the directory that this script lives in.
+ thisdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*$%%'\`
+ test \"x\$thisdir\" = \"x\$file\" && thisdir=.
+
+ # Follow symbolic links until we get to the real thisdir.
+ file=\`ls -ld \"\$file\" | $SED -n 's/.*-> //p'\`
+ while test -n \"\$file\"; do
+ destdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*\$%%'\`
+
+ # If there was a directory component, then change thisdir.
+ if test \"x\$destdir\" != \"x\$file\"; then
+ case \"\$destdir\" in
+ [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;;
+ *) thisdir=\"\$thisdir/\$destdir\" ;;
+ esac
+ fi
+
+ file=\`\$ECHO \"\$file\" | $SED 's%^.*/%%'\`
+ file=\`ls -ld \"\$thisdir/\$file\" | $SED -n 's/.*-> //p'\`
+ done
+
+ # Usually 'no', except on cygwin/mingw when embedded into
+ # the cwrapper.
+ WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_arg1
+ if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then
+ # special case for '.'
+ if test \"\$thisdir\" = \".\"; then
+ thisdir=\`pwd\`
+ fi
+ # remove .libs from thisdir
+ case \"\$thisdir\" in
+ *[\\\\/]$objdir ) thisdir=\`\$ECHO \"\$thisdir\" | $SED 's%[\\\\/][^\\\\/]*$%%'\` ;;
+ $objdir ) thisdir=. ;;
+ esac
+ fi
+
+ # Try to get the absolute directory name.
+ absdir=\`cd \"\$thisdir\" && pwd\`
+ test -n \"\$absdir\" && thisdir=\"\$absdir\"
+"
+
+ if test "$fast_install" = yes; then
+ $ECHO "\
+ program=lt-'$outputname'$exeext
+ progdir=\"\$thisdir/$objdir\"
+
+ if test ! -f \"\$progdir/\$program\" ||
+ { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\
+ test \"X\$file\" != \"X\$progdir/\$program\"; }; then
+
+ file=\"\$\$-\$program\"
+
+ if test ! -d \"\$progdir\"; then
+ $MKDIR \"\$progdir\"
+ else
+ $RM \"\$progdir/\$file\"
+ fi"
+
+ $ECHO "\
+
+ # relink executable if necessary
+ if test -n \"\$relink_command\"; then
+ if relink_command_output=\`eval \$relink_command 2>&1\`; then :
+ else
+ $ECHO \"\$relink_command_output\" >&2
+ $RM \"\$progdir/\$file\"
+ exit 1
+ fi
+ fi
+
+ $MV \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null ||
+ { $RM \"\$progdir/\$program\";
+ $MV \"\$progdir/\$file\" \"\$progdir/\$program\"; }
+ $RM \"\$progdir/\$file\"
+ fi"
+ else
+ $ECHO "\
+ program='$outputname'
+ progdir=\"\$thisdir/$objdir\"
+"
+ fi
+
+ $ECHO "\
+
+ if test -f \"\$progdir/\$program\"; then"
+
+ # fixup the dll searchpath if we need to.
+ #
+ # Fix the DLL searchpath if we need to. Do this before prepending
+ # to shlibpath, because on Windows, both are PATH and uninstalled
+ # libraries must come first.
+ if test -n "$dllsearchpath"; then
+ $ECHO "\
+ # Add the dll search path components to the executable PATH
+ PATH=$dllsearchpath:\$PATH
+"
+ fi
+
+ # Export our shlibpath_var if we have one.
+ if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
+ $ECHO "\
+ # Add our own library path to $shlibpath_var
+ $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
+
+ # Some systems cannot cope with colon-terminated $shlibpath_var
+ # The second colon is a workaround for a bug in BeOS R4 sed
+ $shlibpath_var=\`\$ECHO \"\$$shlibpath_var\" | $SED 's/::*\$//'\`
+
+ export $shlibpath_var
+"
+ fi
+
+ $ECHO "\
+ if test \"\$libtool_execute_magic\" != \"$magic\"; then
+ # Run the actual program with our arguments.
+ func_exec_program \${1+\"\$@\"}
+ fi
+ else
+ # The program doesn't exist.
+ \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2
+ \$ECHO \"This script is just a wrapper for \$program.\" 1>&2
+ \$ECHO \"See the $PACKAGE documentation for more information.\" 1>&2
+ exit 1
+ fi
+fi\
+"
+}
+
+
+# func_emit_cwrapperexe_src
+# emit the source code for a wrapper executable on stdout
+# Must ONLY be called from within func_mode_link because
+# it depends on a number of variable set therein.
+func_emit_cwrapperexe_src ()
+{
+ cat <<EOF
+
+/* $cwrappersource - temporary wrapper executable for $objdir/$outputname
+ Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+
+ The $output program cannot be directly executed until all the libtool
+ libraries that it depends on are installed.
+
+ This wrapper executable should never be moved out of the build directory.
+ If it is, it will not operate correctly.
+*/
+EOF
+ cat <<"EOF"
+#ifdef _MSC_VER
+# define _CRT_SECURE_NO_DEPRECATE 1
+#endif
+#include <stdio.h>
+#include <stdlib.h>
+#ifdef _MSC_VER
+# include <direct.h>
+# include <process.h>
+# include <io.h>
+#else
+# include <unistd.h>
+# include <stdint.h>
+# ifdef __CYGWIN__
+# include <io.h>
+# endif
+#endif
+#include <malloc.h>
+#include <stdarg.h>
+#include <assert.h>
+#include <string.h>
+#include <ctype.h>
+#include <errno.h>
+#include <fcntl.h>
+#include <sys/stat.h>
+
+/* declarations of non-ANSI functions */
+#if defined(__MINGW32__)
+# ifdef __STRICT_ANSI__
+int _putenv (const char *);
+# endif
+#elif defined(__CYGWIN__)
+# ifdef __STRICT_ANSI__
+char *realpath (const char *, char *);
+int putenv (char *);
+int setenv (const char *, const char *, int);
+# endif
+/* #elif defined (other platforms) ... */
+#endif
+
+/* portability defines, excluding path handling macros */
+#if defined(_MSC_VER)
+# define setmode _setmode
+# define stat _stat
+# define chmod _chmod
+# define getcwd _getcwd
+# define putenv _putenv
+# define S_IXUSR _S_IEXEC
+# ifndef _INTPTR_T_DEFINED
+# define _INTPTR_T_DEFINED
+# define intptr_t int
+# endif
+#elif defined(__MINGW32__)
+# define setmode _setmode
+# define stat _stat
+# define chmod _chmod
+# define getcwd _getcwd
+# define putenv _putenv
+#elif defined(__CYGWIN__)
+# define HAVE_SETENV
+# define FOPEN_WB "wb"
+/* #elif defined (other platforms) ... */
+#endif
+
+#if defined(PATH_MAX)
+# define LT_PATHMAX PATH_MAX
+#elif defined(MAXPATHLEN)
+# define LT_PATHMAX MAXPATHLEN
+#else
+# define LT_PATHMAX 1024
+#endif
+
+#ifndef S_IXOTH
+# define S_IXOTH 0
+#endif
+#ifndef S_IXGRP
+# define S_IXGRP 0
+#endif
+
+/* path handling portability macros */
+#ifndef DIR_SEPARATOR
+# define DIR_SEPARATOR '/'
+# define PATH_SEPARATOR ':'
+#endif
+
+#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \
+ defined (__OS2__)
+# define HAVE_DOS_BASED_FILE_SYSTEM
+# define FOPEN_WB "wb"
+# ifndef DIR_SEPARATOR_2
+# define DIR_SEPARATOR_2 '\\'
+# endif
+# ifndef PATH_SEPARATOR_2
+# define PATH_SEPARATOR_2 ';'
+# endif
+#endif
+
+#ifndef DIR_SEPARATOR_2
+# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR)
+#else /* DIR_SEPARATOR_2 */
+# define IS_DIR_SEPARATOR(ch) \
+ (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2))
+#endif /* DIR_SEPARATOR_2 */
+
+#ifndef PATH_SEPARATOR_2
+# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR)
+#else /* PATH_SEPARATOR_2 */
+# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2)
+#endif /* PATH_SEPARATOR_2 */
+
+#ifndef FOPEN_WB
+# define FOPEN_WB "w"
+#endif
+#ifndef _O_BINARY
+# define _O_BINARY 0
+#endif
+
+#define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type)))
+#define XFREE(stale) do { \
+ if (stale) { free ((void *) stale); stale = 0; } \
+} while (0)
+
+#if defined(LT_DEBUGWRAPPER)
+static int lt_debug = 1;
+#else
+static int lt_debug = 0;
+#endif
+
+const char *program_name = "libtool-wrapper"; /* in case xstrdup fails */
+
+void *xmalloc (size_t num);
+char *xstrdup (const char *string);
+const char *base_name (const char *name);
+char *find_executable (const char *wrapper);
+char *chase_symlinks (const char *pathspec);
+int make_executable (const char *path);
+int check_executable (const char *path);
+char *strendzap (char *str, const char *pat);
+void lt_debugprintf (const char *file, int line, const char *fmt, ...);
+void lt_fatal (const char *file, int line, const char *message, ...);
+static const char *nonnull (const char *s);
+static const char *nonempty (const char *s);
+void lt_setenv (const char *name, const char *value);
+char *lt_extend_str (const char *orig_value, const char *add, int to_end);
+void lt_update_exe_path (const char *name, const char *value);
+void lt_update_lib_path (const char *name, const char *value);
+char **prepare_spawn (char **argv);
+void lt_dump_script (FILE *f);
+EOF
+
+ cat <<EOF
+volatile const char * MAGIC_EXE = "$magic_exe";
+const char * LIB_PATH_VARNAME = "$shlibpath_var";
+EOF
+
+ if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
+ func_to_host_path "$temp_rpath"
+ cat <<EOF
+const char * LIB_PATH_VALUE = "$func_to_host_path_result";
+EOF
+ else
+ cat <<"EOF"
+const char * LIB_PATH_VALUE = "";
+EOF
+ fi
+
+ if test -n "$dllsearchpath"; then
+ func_to_host_path "$dllsearchpath:"
+ cat <<EOF
+const char * EXE_PATH_VARNAME = "PATH";
+const char * EXE_PATH_VALUE = "$func_to_host_path_result";
+EOF
+ else
+ cat <<"EOF"
+const char * EXE_PATH_VARNAME = "";
+const char * EXE_PATH_VALUE = "";
+EOF
+ fi
+
+ if test "$fast_install" = yes; then
+ cat <<EOF
+const char * TARGET_PROGRAM_NAME = "lt-$outputname"; /* hopefully, no .exe */
+EOF
+ else
+ cat <<EOF
+const char * TARGET_PROGRAM_NAME = "$outputname"; /* hopefully, no .exe */
+EOF
+ fi
+
+
+ cat <<"EOF"
+
+#define LTWRAPPER_OPTION_PREFIX "--lt-"
+
+static const char *ltwrapper_option_prefix = LTWRAPPER_OPTION_PREFIX;
+static const char *dumpscript_opt = LTWRAPPER_OPTION_PREFIX "dump-script";
+static const char *debug_opt = LTWRAPPER_OPTION_PREFIX "debug";
+
+int
+main (int argc, char *argv[])
+{
+ char **newargz;
+ int newargc;
+ char *tmp_pathspec;
+ char *actual_cwrapper_path;
+ char *actual_cwrapper_name;
+ char *target_name;
+ char *lt_argv_zero;
+ intptr_t rval = 127;
+
+ int i;
+
+ program_name = (char *) xstrdup (base_name (argv[0]));
+ newargz = XMALLOC (char *, argc + 1);
+
+ /* very simple arg parsing; don't want to rely on getopt
+ * also, copy all non cwrapper options to newargz, except
+ * argz[0], which is handled differently
+ */
+ newargc=0;
+ for (i = 1; i < argc; i++)
+ {
+ if (strcmp (argv[i], dumpscript_opt) == 0)
+ {
+EOF
+ case "$host" in
+ *mingw* | *cygwin* )
+ # make stdout use "unix" line endings
+ echo " setmode(1,_O_BINARY);"
+ ;;
+ esac
+
+ cat <<"EOF"
+ lt_dump_script (stdout);
+ return 0;
+ }
+ if (strcmp (argv[i], debug_opt) == 0)
+ {
+ lt_debug = 1;
+ continue;
+ }
+ if (strcmp (argv[i], ltwrapper_option_prefix) == 0)
+ {
+ /* however, if there is an option in the LTWRAPPER_OPTION_PREFIX
+ namespace, but it is not one of the ones we know about and
+ have already dealt with, above (inluding dump-script), then
+ report an error. Otherwise, targets might begin to believe
+ they are allowed to use options in the LTWRAPPER_OPTION_PREFIX
+ namespace. The first time any user complains about this, we'll
+ need to make LTWRAPPER_OPTION_PREFIX a configure-time option
+ or a configure.ac-settable value.
+ */
+ lt_fatal (__FILE__, __LINE__,
+ "unrecognized %s option: '%s'",
+ ltwrapper_option_prefix, argv[i]);
+ }
+ /* otherwise ... */
+ newargz[++newargc] = xstrdup (argv[i]);
+ }
+ newargz[++newargc] = NULL;
+
+EOF
+ cat <<EOF
+ /* The GNU banner must be the first non-error debug message */
+ lt_debugprintf (__FILE__, __LINE__, "libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\n");
+EOF
+ cat <<"EOF"
+ lt_debugprintf (__FILE__, __LINE__, "(main) argv[0]: %s\n", argv[0]);
+ lt_debugprintf (__FILE__, __LINE__, "(main) program_name: %s\n", program_name);
+
+ tmp_pathspec = find_executable (argv[0]);
+ if (tmp_pathspec == NULL)
+ lt_fatal (__FILE__, __LINE__, "couldn't find %s", argv[0]);
+ lt_debugprintf (__FILE__, __LINE__,
+ "(main) found exe (before symlink chase) at: %s\n",
+ tmp_pathspec);
+
+ actual_cwrapper_path = chase_symlinks (tmp_pathspec);
+ lt_debugprintf (__FILE__, __LINE__,
+ "(main) found exe (after symlink chase) at: %s\n",
+ actual_cwrapper_path);
+ XFREE (tmp_pathspec);
+
+ actual_cwrapper_name = xstrdup (base_name (actual_cwrapper_path));
+ strendzap (actual_cwrapper_path, actual_cwrapper_name);
+
+ /* wrapper name transforms */
+ strendzap (actual_cwrapper_name, ".exe");
+ tmp_pathspec = lt_extend_str (actual_cwrapper_name, ".exe", 1);
+ XFREE (actual_cwrapper_name);
+ actual_cwrapper_name = tmp_pathspec;
+ tmp_pathspec = 0;
+
+ /* target_name transforms -- use actual target program name; might have lt- prefix */
+ target_name = xstrdup (base_name (TARGET_PROGRAM_NAME));
+ strendzap (target_name, ".exe");
+ tmp_pathspec = lt_extend_str (target_name, ".exe", 1);
+ XFREE (target_name);
+ target_name = tmp_pathspec;
+ tmp_pathspec = 0;
+
+ lt_debugprintf (__FILE__, __LINE__,
+ "(main) libtool target name: %s\n",
+ target_name);
+EOF
+
+ cat <<EOF
+ newargz[0] =
+ XMALLOC (char, (strlen (actual_cwrapper_path) +
+ strlen ("$objdir") + 1 + strlen (actual_cwrapper_name) + 1));
+ strcpy (newargz[0], actual_cwrapper_path);
+ strcat (newargz[0], "$objdir");
+ strcat (newargz[0], "/");
+EOF
+
+ cat <<"EOF"
+ /* stop here, and copy so we don't have to do this twice */
+ tmp_pathspec = xstrdup (newargz[0]);
+
+ /* do NOT want the lt- prefix here, so use actual_cwrapper_name */
+ strcat (newargz[0], actual_cwrapper_name);
+
+ /* DO want the lt- prefix here if it exists, so use target_name */
+ lt_argv_zero = lt_extend_str (tmp_pathspec, target_name, 1);
+ XFREE (tmp_pathspec);
+ tmp_pathspec = NULL;
+EOF
+
+ case $host_os in
+ mingw*)
+ cat <<"EOF"
+ {
+ char* p;
+ while ((p = strchr (newargz[0], '\\')) != NULL)
+ {
+ *p = '/';
+ }
+ while ((p = strchr (lt_argv_zero, '\\')) != NULL)
+ {
+ *p = '/';
+ }
+ }
+EOF
+ ;;
+ esac
+
+ cat <<"EOF"
+ XFREE (target_name);
+ XFREE (actual_cwrapper_path);
+ XFREE (actual_cwrapper_name);
+
+ lt_setenv ("BIN_SH", "xpg4"); /* for Tru64 */
+ lt_setenv ("DUALCASE", "1"); /* for MSK sh */
+ /* Update the DLL searchpath. EXE_PATH_VALUE ($dllsearchpath) must
+ be prepended before (that is, appear after) LIB_PATH_VALUE ($temp_rpath)
+ because on Windows, both *_VARNAMEs are PATH but uninstalled
+ libraries must come first. */
+ lt_update_exe_path (EXE_PATH_VARNAME, EXE_PATH_VALUE);
+ lt_update_lib_path (LIB_PATH_VARNAME, LIB_PATH_VALUE);
+
+ lt_debugprintf (__FILE__, __LINE__, "(main) lt_argv_zero: %s\n",
+ nonnull (lt_argv_zero));
+ for (i = 0; i < newargc; i++)
+ {
+ lt_debugprintf (__FILE__, __LINE__, "(main) newargz[%d]: %s\n",
+ i, nonnull (newargz[i]));
+ }
+
+EOF
+
+ case $host_os in
+ mingw*)
+ cat <<"EOF"
+ /* execv doesn't actually work on mingw as expected on unix */
+ newargz = prepare_spawn (newargz);
+ rval = _spawnv (_P_WAIT, lt_argv_zero, (const char * const *) newargz);
+ if (rval == -1)
+ {
+ /* failed to start process */
+ lt_debugprintf (__FILE__, __LINE__,
+ "(main) failed to launch target \"%s\": %s\n",
+ lt_argv_zero, nonnull (strerror (errno)));
+ return 127;
+ }
+ return rval;
+EOF
+ ;;
+ *)
+ cat <<"EOF"
+ execv (lt_argv_zero, newargz);
+ return rval; /* =127, but avoids unused variable warning */
+EOF
+ ;;
+ esac
+
+ cat <<"EOF"
+}
+
+void *
+xmalloc (size_t num)
+{
+ void *p = (void *) malloc (num);
+ if (!p)
+ lt_fatal (__FILE__, __LINE__, "memory exhausted");
+
+ return p;
+}
+
+char *
+xstrdup (const char *string)
+{
+ return string ? strcpy ((char *) xmalloc (strlen (string) + 1),
+ string) : NULL;
+}
+
+const char *
+base_name (const char *name)
+{
+ const char *base;
+
+#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+ /* Skip over the disk name in MSDOS pathnames. */
+ if (isalpha ((unsigned char) name[0]) && name[1] == ':')
+ name += 2;
+#endif
+
+ for (base = name; *name; name++)
+ if (IS_DIR_SEPARATOR (*name))
+ base = name + 1;
+ return base;
+}
+
+int
+check_executable (const char *path)
+{
+ struct stat st;
+
+ lt_debugprintf (__FILE__, __LINE__, "(check_executable): %s\n",
+ nonempty (path));
+ if ((!path) || (!*path))
+ return 0;
+
+ if ((stat (path, &st) >= 0)
+ && (st.st_mode & (S_IXUSR | S_IXGRP | S_IXOTH)))
+ return 1;
+ else
+ return 0;
+}
+
+int
+make_executable (const char *path)
+{
+ int rval = 0;
+ struct stat st;
+
+ lt_debugprintf (__FILE__, __LINE__, "(make_executable): %s\n",
+ nonempty (path));
+ if ((!path) || (!*path))
+ return 0;
+
+ if (stat (path, &st) >= 0)
+ {
+ rval = chmod (path, st.st_mode | S_IXOTH | S_IXGRP | S_IXUSR);
+ }
+ return rval;
+}
+
+/* Searches for the full path of the wrapper. Returns
+ newly allocated full path name if found, NULL otherwise
+ Does not chase symlinks, even on platforms that support them.
+*/
+char *
+find_executable (const char *wrapper)
+{
+ int has_slash = 0;
+ const char *p;
+ const char *p_next;
+ /* static buffer for getcwd */
+ char tmp[LT_PATHMAX + 1];
+ int tmp_len;
+ char *concat_name;
+
+ lt_debugprintf (__FILE__, __LINE__, "(find_executable): %s\n",
+ nonempty (wrapper));
+
+ if ((wrapper == NULL) || (*wrapper == '\0'))
+ return NULL;
+
+ /* Absolute path? */
+#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+ if (isalpha ((unsigned char) wrapper[0]) && wrapper[1] == ':')
+ {
+ concat_name = xstrdup (wrapper);
+ if (check_executable (concat_name))
+ return concat_name;
+ XFREE (concat_name);
+ }
+ else
+ {
+#endif
+ if (IS_DIR_SEPARATOR (wrapper[0]))
+ {
+ concat_name = xstrdup (wrapper);
+ if (check_executable (concat_name))
+ return concat_name;
+ XFREE (concat_name);
+ }
+#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+ }
+#endif
+
+ for (p = wrapper; *p; p++)
+ if (*p == '/')
+ {
+ has_slash = 1;
+ break;
+ }
+ if (!has_slash)
+ {
+ /* no slashes; search PATH */
+ const char *path = getenv ("PATH");
+ if (path != NULL)
+ {
+ for (p = path; *p; p = p_next)
+ {
+ const char *q;
+ size_t p_len;
+ for (q = p; *q; q++)
+ if (IS_PATH_SEPARATOR (*q))
+ break;
+ p_len = q - p;
+ p_next = (*q == '\0' ? q : q + 1);
+ if (p_len == 0)
+ {
+ /* empty path: current directory */
+ if (getcwd (tmp, LT_PATHMAX) == NULL)
+ lt_fatal (__FILE__, __LINE__, "getcwd failed: %s",
+ nonnull (strerror (errno)));
+ tmp_len = strlen (tmp);
+ concat_name =
+ XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
+ memcpy (concat_name, tmp, tmp_len);
+ concat_name[tmp_len] = '/';
+ strcpy (concat_name + tmp_len + 1, wrapper);
+ }
+ else
+ {
+ concat_name =
+ XMALLOC (char, p_len + 1 + strlen (wrapper) + 1);
+ memcpy (concat_name, p, p_len);
+ concat_name[p_len] = '/';
+ strcpy (concat_name + p_len + 1, wrapper);
+ }
+ if (check_executable (concat_name))
+ return concat_name;
+ XFREE (concat_name);
+ }
+ }
+ /* not found in PATH; assume curdir */
+ }
+ /* Relative path | not found in path: prepend cwd */
+ if (getcwd (tmp, LT_PATHMAX) == NULL)
+ lt_fatal (__FILE__, __LINE__, "getcwd failed: %s",
+ nonnull (strerror (errno)));
+ tmp_len = strlen (tmp);
+ concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
+ memcpy (concat_name, tmp, tmp_len);
+ concat_name[tmp_len] = '/';
+ strcpy (concat_name + tmp_len + 1, wrapper);
+
+ if (check_executable (concat_name))
+ return concat_name;
+ XFREE (concat_name);
+ return NULL;
+}
+
+char *
+chase_symlinks (const char *pathspec)
+{
+#ifndef S_ISLNK
+ return xstrdup (pathspec);
+#else
+ char buf[LT_PATHMAX];
+ struct stat s;
+ char *tmp_pathspec = xstrdup (pathspec);
+ char *p;
+ int has_symlinks = 0;
+ while (strlen (tmp_pathspec) && !has_symlinks)
+ {
+ lt_debugprintf (__FILE__, __LINE__,
+ "checking path component for symlinks: %s\n",
+ tmp_pathspec);
+ if (lstat (tmp_pathspec, &s) == 0)
+ {
+ if (S_ISLNK (s.st_mode) != 0)
+ {
+ has_symlinks = 1;
+ break;
+ }
+
+ /* search backwards for last DIR_SEPARATOR */
+ p = tmp_pathspec + strlen (tmp_pathspec) - 1;
+ while ((p > tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
+ p--;
+ if ((p == tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
+ {
+ /* no more DIR_SEPARATORS left */
+ break;
+ }
+ *p = '\0';
+ }
+ else
+ {
+ lt_fatal (__FILE__, __LINE__,
+ "error accessing file \"%s\": %s",
+ tmp_pathspec, nonnull (strerror (errno)));
+ }
+ }
+ XFREE (tmp_pathspec);
+
+ if (!has_symlinks)
+ {
+ return xstrdup (pathspec);
+ }
+
+ tmp_pathspec = realpath (pathspec, buf);
+ if (tmp_pathspec == 0)
+ {
+ lt_fatal (__FILE__, __LINE__,
+ "could not follow symlinks for %s", pathspec);
+ }
+ return xstrdup (tmp_pathspec);
+#endif
+}
+
+char *
+strendzap (char *str, const char *pat)
+{
+ size_t len, patlen;
+
+ assert (str != NULL);
+ assert (pat != NULL);
+
+ len = strlen (str);
+ patlen = strlen (pat);
+
+ if (patlen <= len)
+ {
+ str += len - patlen;
+ if (strcmp (str, pat) == 0)
+ *str = '\0';
+ }
+ return str;
+}
+
+void
+lt_debugprintf (const char *file, int line, const char *fmt, ...)
+{
+ va_list args;
+ if (lt_debug)
+ {
+ (void) fprintf (stderr, "%s:%s:%d: ", program_name, file, line);
+ va_start (args, fmt);
+ (void) vfprintf (stderr, fmt, args);
+ va_end (args);
+ }
+}
+
+static void
+lt_error_core (int exit_status, const char *file,
+ int line, const char *mode,
+ const char *message, va_list ap)
+{
+ fprintf (stderr, "%s:%s:%d: %s: ", program_name, file, line, mode);
+ vfprintf (stderr, message, ap);
+ fprintf (stderr, ".\n");
+
+ if (exit_status >= 0)
+ exit (exit_status);
+}
+
+void
+lt_fatal (const char *file, int line, const char *message, ...)
+{
+ va_list ap;
+ va_start (ap, message);
+ lt_error_core (EXIT_FAILURE, file, line, "FATAL", message, ap);
+ va_end (ap);
+}
+
+static const char *
+nonnull (const char *s)
+{
+ return s ? s : "(null)";
+}
+
+static const char *
+nonempty (const char *s)
+{
+ return (s && !*s) ? "(empty)" : nonnull (s);
+}
+
+void
+lt_setenv (const char *name, const char *value)
+{
+ lt_debugprintf (__FILE__, __LINE__,
+ "(lt_setenv) setting '%s' to '%s'\n",
+ nonnull (name), nonnull (value));
+ {
+#ifdef HAVE_SETENV
+ /* always make a copy, for consistency with !HAVE_SETENV */
+ char *str = xstrdup (value);
+ setenv (name, str, 1);
+#else
+ int len = strlen (name) + 1 + strlen (value) + 1;
+ char *str = XMALLOC (char, len);
+ sprintf (str, "%s=%s", name, value);
+ if (putenv (str) != EXIT_SUCCESS)
+ {
+ XFREE (str);
+ }
+#endif
+ }
+}
+
+char *
+lt_extend_str (const char *orig_value, const char *add, int to_end)
+{
+ char *new_value;
+ if (orig_value && *orig_value)
+ {
+ int orig_value_len = strlen (orig_value);
+ int add_len = strlen (add);
+ new_value = XMALLOC (char, add_len + orig_value_len + 1);
+ if (to_end)
+ {
+ strcpy (new_value, orig_value);
+ strcpy (new_value + orig_value_len, add);
+ }
+ else
+ {
+ strcpy (new_value, add);
+ strcpy (new_value + add_len, orig_value);
+ }
+ }
+ else
+ {
+ new_value = xstrdup (add);
+ }
+ return new_value;
+}
+
+void
+lt_update_exe_path (const char *name, const char *value)
+{
+ lt_debugprintf (__FILE__, __LINE__,
+ "(lt_update_exe_path) modifying '%s' by prepending '%s'\n",
+ nonnull (name), nonnull (value));
+
+ if (name && *name && value && *value)
+ {
+ char *new_value = lt_extend_str (getenv (name), value, 0);
+ /* some systems can't cope with a ':'-terminated path #' */
+ int len = strlen (new_value);
+ while (((len = strlen (new_value)) > 0) && IS_PATH_SEPARATOR (new_value[len-1]))
+ {
+ new_value[len-1] = '\0';
+ }
+ lt_setenv (name, new_value);
+ XFREE (new_value);
+ }
+}
+
+void
+lt_update_lib_path (const char *name, const char *value)
+{
+ lt_debugprintf (__FILE__, __LINE__,
+ "(lt_update_lib_path) modifying '%s' by prepending '%s'\n",
+ nonnull (name), nonnull (value));
+
+ if (name && *name && value && *value)
+ {
+ char *new_value = lt_extend_str (getenv (name), value, 0);
+ lt_setenv (name, new_value);
+ XFREE (new_value);
+ }
+}
+
+EOF
+ case $host_os in
+ mingw*)
+ cat <<"EOF"
+
+/* Prepares an argument vector before calling spawn().
+ Note that spawn() does not by itself call the command interpreter
+ (getenv ("COMSPEC") != NULL ? getenv ("COMSPEC") :
+ ({ OSVERSIONINFO v; v.dwOSVersionInfoSize = sizeof(OSVERSIONINFO);
+ GetVersionEx(&v);
+ v.dwPlatformId == VER_PLATFORM_WIN32_NT;
+ }) ? "cmd.exe" : "command.com").
+ Instead it simply concatenates the arguments, separated by ' ', and calls
+ CreateProcess(). We must quote the arguments since Win32 CreateProcess()
+ interprets characters like ' ', '\t', '\\', '"' (but not '<' and '>') in a
+ special way:
+ - Space and tab are interpreted as delimiters. They are not treated as
+ delimiters if they are surrounded by double quotes: "...".
+ - Unescaped double quotes are removed from the input. Their only effect is
+ that within double quotes, space and tab are treated like normal
+ characters.
+ - Backslashes not followed by double quotes are not special.
+ - But 2*n+1 backslashes followed by a double quote become
+ n backslashes followed by a double quote (n >= 0):
+ \" -> "
+ \\\" -> \"
+ \\\\\" -> \\"
+ */
+#define SHELL_SPECIAL_CHARS "\"\\ \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037"
+#define SHELL_SPACE_CHARS " \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037"
+char **
+prepare_spawn (char **argv)
+{
+ size_t argc;
+ char **new_argv;
+ size_t i;
+
+ /* Count number of arguments. */
+ for (argc = 0; argv[argc] != NULL; argc++)
+ ;
+
+ /* Allocate new argument vector. */
+ new_argv = XMALLOC (char *, argc + 1);
+
+ /* Put quoted arguments into the new argument vector. */
+ for (i = 0; i < argc; i++)
+ {
+ const char *string = argv[i];
+
+ if (string[0] == '\0')
+ new_argv[i] = xstrdup ("\"\"");
+ else if (strpbrk (string, SHELL_SPECIAL_CHARS) != NULL)
+ {
+ int quote_around = (strpbrk (string, SHELL_SPACE_CHARS) != NULL);
+ size_t length;
+ unsigned int backslashes;
+ const char *s;
+ char *quoted_string;
+ char *p;
+
+ length = 0;
+ backslashes = 0;
+ if (quote_around)
+ length++;
+ for (s = string; *s != '\0'; s++)
+ {
+ char c = *s;
+ if (c == '"')
+ length += backslashes + 1;
+ length++;
+ if (c == '\\')
+ backslashes++;
+ else
+ backslashes = 0;
+ }
+ if (quote_around)
+ length += backslashes + 1;
+
+ quoted_string = XMALLOC (char, length + 1);
+
+ p = quoted_string;
+ backslashes = 0;
+ if (quote_around)
+ *p++ = '"';
+ for (s = string; *s != '\0'; s++)
+ {
+ char c = *s;
+ if (c == '"')
+ {
+ unsigned int j;
+ for (j = backslashes + 1; j > 0; j--)
+ *p++ = '\\';
+ }
+ *p++ = c;
+ if (c == '\\')
+ backslashes++;
+ else
+ backslashes = 0;
+ }
+ if (quote_around)
+ {
+ unsigned int j;
+ for (j = backslashes; j > 0; j--)
+ *p++ = '\\';
+ *p++ = '"';
+ }
+ *p = '\0';
+
+ new_argv[i] = quoted_string;
+ }
+ else
+ new_argv[i] = (char *) string;
+ }
+ new_argv[argc] = NULL;
+
+ return new_argv;
+}
+EOF
+ ;;
+ esac
+
+ cat <<"EOF"
+void lt_dump_script (FILE* f)
+{
+EOF
+ func_emit_wrapper yes |
+ $SED -n -e '
+s/^\(.\{79\}\)\(..*\)/\1\
+\2/
+h
+s/\([\\"]\)/\\\1/g
+s/$/\\n/
+s/\([^\n]*\).*/ fputs ("\1", f);/p
+g
+D'
+ cat <<"EOF"
+}
+EOF
+}
+# end: func_emit_cwrapperexe_src
+
+# func_win32_import_lib_p ARG
+# True if ARG is an import lib, as indicated by $file_magic_cmd
+func_win32_import_lib_p ()
+{
+ $opt_debug
+ case `eval $file_magic_cmd \"\$1\" 2>/dev/null | $SED -e 10q` in
+ *import*) : ;;
+ *) false ;;
+ esac
+}
+
+# func_mode_link arg...
+func_mode_link ()
+{
+ $opt_debug
+ case $host in
+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
+ # It is impossible to link a dll without this setting, and
+ # we shouldn't force the makefile maintainer to figure out
+ # which system we are compiling for in order to pass an extra
+ # flag for every libtool invocation.
+ # allow_undefined=no
+
+ # FIXME: Unfortunately, there are problems with the above when trying
+ # to make a dll which has undefined symbols, in which case not
+ # even a static library is built. For now, we need to specify
+ # -no-undefined on the libtool link line when we can be certain
+ # that all symbols are satisfied, otherwise we get a static library.
+ allow_undefined=yes
+ ;;
+ *)
+ allow_undefined=yes
+ ;;
+ esac
+ libtool_args=$nonopt
+ base_compile="$nonopt $@"
+ compile_command=$nonopt
+ finalize_command=$nonopt
+
+ compile_rpath=
+ finalize_rpath=
+ compile_shlibpath=
+ finalize_shlibpath=
+ convenience=
+ old_convenience=
+ deplibs=
+ old_deplibs=
+ compiler_flags=
+ linker_flags=
+ dllsearchpath=
+ lib_search_path=`pwd`
+ inst_prefix_dir=
+ new_inherited_linker_flags=
+
+ avoid_version=no
+ bindir=
+ dlfiles=
+ dlprefiles=
+ dlself=no
+ export_dynamic=no
+ export_symbols=
+ export_symbols_regex=
+ generated=
+ libobjs=
+ ltlibs=
+ module=no
+ no_install=no
+ objs=
+ non_pic_objects=
+ precious_files_regex=
+ prefer_static_libs=no
+ preload=no
+ prev=
+ prevarg=
+ release=
+ rpath=
+ xrpath=
+ perm_rpath=
+ temp_rpath=
+ thread_safe=no
+ vinfo=
+ vinfo_number=no
+ weak_libs=
+ single_module="${wl}-single_module"
+ func_infer_tag $base_compile
+
+ # We need to know -static, to get the right output filenames.
+ for arg
+ do
+ case $arg in
+ -shared)
+ test "$build_libtool_libs" != yes && \
+ func_fatal_configuration "can not build a shared library"
+ build_old_libs=no
+ break
+ ;;
+ -all-static | -static | -static-libtool-libs)
+ case $arg in
+ -all-static)
+ if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
+ func_warning "complete static linking is impossible in this configuration"
+ fi
+ if test -n "$link_static_flag"; then
+ dlopen_self=$dlopen_self_static
+ fi
+ prefer_static_libs=yes
+ ;;
+ -static)
+ if test -z "$pic_flag" && test -n "$link_static_flag"; then
+ dlopen_self=$dlopen_self_static
+ fi
+ prefer_static_libs=built
+ ;;
+ -static-libtool-libs)
+ if test -z "$pic_flag" && test -n "$link_static_flag"; then
+ dlopen_self=$dlopen_self_static
+ fi
+ prefer_static_libs=yes
+ ;;
+ esac
+ build_libtool_libs=no
+ build_old_libs=yes
+ break
+ ;;
+ esac
+ done
+
+ # See if our shared archives depend on static archives.
+ test -n "$old_archive_from_new_cmds" && build_old_libs=yes
+
+ # Go through the arguments, transforming them on the way.
+ while test "$#" -gt 0; do
+ arg="$1"
+ shift
+ func_quote_for_eval "$arg"
+ qarg=$func_quote_for_eval_unquoted_result
+ func_append libtool_args " $func_quote_for_eval_result"
+
+ # If the previous option needs an argument, assign it.
+ if test -n "$prev"; then
+ case $prev in
+ output)
+ func_append compile_command " @OUTPUT@"
+ func_append finalize_command " @OUTPUT@"
+ ;;
+ esac
+
+ case $prev in
+ bindir)
+ bindir="$arg"
+ prev=
+ continue
+ ;;
+ dlfiles|dlprefiles)
+ if test "$preload" = no; then
+ # Add the symbol object into the linking commands.
+ func_append compile_command " @SYMFILE@"
+ func_append finalize_command " @SYMFILE@"
+ preload=yes
+ fi
+ case $arg in
+ *.la | *.lo) ;; # We handle these cases below.
+ force)
+ if test "$dlself" = no; then
+ dlself=needless
+ export_dynamic=yes
+ fi
+ prev=
+ continue
+ ;;
+ self)
+ if test "$prev" = dlprefiles; then
+ dlself=yes
+ elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then
+ dlself=yes
+ else
+ dlself=needless
+ export_dynamic=yes
+ fi
+ prev=
+ continue
+ ;;
+ *)
+ if test "$prev" = dlfiles; then
+ func_append dlfiles " $arg"
+ else
+ func_append dlprefiles " $arg"
+ fi
+ prev=
+ continue
+ ;;
+ esac
+ ;;
+ expsyms)
+ export_symbols="$arg"
+ test -f "$arg" \
+ || func_fatal_error "symbol file \`$arg' does not exist"
+ prev=
+ continue
+ ;;
+ expsyms_regex)
+ export_symbols_regex="$arg"
+ prev=
+ continue
+ ;;
+ framework)
+ case $host in
+ *-*-darwin*)
+ case "$deplibs " in
+ *" $qarg.ltframework "*) ;;
+ *) func_append deplibs " $qarg.ltframework" # this is fixed later
+ ;;
+ esac
+ ;;
+ esac
+ prev=
+ continue
+ ;;
+ inst_prefix)
+ inst_prefix_dir="$arg"
+ prev=
+ continue
+ ;;
+ objectlist)
+ if test -f "$arg"; then
+ save_arg=$arg
+ moreargs=
+ for fil in `cat "$save_arg"`
+ do
+# func_append moreargs " $fil"
+ arg=$fil
+ # A libtool-controlled object.
+
+ # Check to see that this really is a libtool object.
+ if func_lalib_unsafe_p "$arg"; then
+ pic_object=
+ non_pic_object=
+
+ # Read the .lo file
+ func_source "$arg"
+
+ if test -z "$pic_object" ||
+ test -z "$non_pic_object" ||
+ test "$pic_object" = none &&
+ test "$non_pic_object" = none; then
+ func_fatal_error "cannot find name of object for \`$arg'"
+ fi
+
+ # Extract subdirectory from the argument.
+ func_dirname "$arg" "/" ""
+ xdir="$func_dirname_result"
+
+ if test "$pic_object" != none; then
+ # Prepend the subdirectory the object is found in.
+ pic_object="$xdir$pic_object"
+
+ if test "$prev" = dlfiles; then
+ if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
+ func_append dlfiles " $pic_object"
+ prev=
+ continue
+ else
+ # If libtool objects are unsupported, then we need to preload.
+ prev=dlprefiles
+ fi
+ fi
+
+ # CHECK ME: I think I busted this. -Ossama
+ if test "$prev" = dlprefiles; then
+ # Preload the old-style object.
+ func_append dlprefiles " $pic_object"
+ prev=
+ fi
+
+ # A PIC object.
+ func_append libobjs " $pic_object"
+ arg="$pic_object"
+ fi
+
+ # Non-PIC object.
+ if test "$non_pic_object" != none; then
+ # Prepend the subdirectory the object is found in.
+ non_pic_object="$xdir$non_pic_object"
+
+ # A standard non-PIC object
+ func_append non_pic_objects " $non_pic_object"
+ if test -z "$pic_object" || test "$pic_object" = none ; then
+ arg="$non_pic_object"
+ fi
+ else
+ # If the PIC object exists, use it instead.
+ # $xdir was prepended to $pic_object above.
+ non_pic_object="$pic_object"
+ func_append non_pic_objects " $non_pic_object"
+ fi
+ else
+ # Only an error if not doing a dry-run.
+ if $opt_dry_run; then
+ # Extract subdirectory from the argument.
+ func_dirname "$arg" "/" ""
+ xdir="$func_dirname_result"
+
+ func_lo2o "$arg"
+ pic_object=$xdir$objdir/$func_lo2o_result
+ non_pic_object=$xdir$func_lo2o_result
+ func_append libobjs " $pic_object"
+ func_append non_pic_objects " $non_pic_object"
+ else
+ func_fatal_error "\`$arg' is not a valid libtool object"
+ fi
+ fi
+ done
+ else
+ func_fatal_error "link input file \`$arg' does not exist"
+ fi
+ arg=$save_arg
+ prev=
+ continue
+ ;;
+ precious_regex)
+ precious_files_regex="$arg"
+ prev=
+ continue
+ ;;
+ release)
+ release="-$arg"
+ prev=
+ continue
+ ;;
+ rpath | xrpath)
+ # We need an absolute path.
+ case $arg in
+ [\\/]* | [A-Za-z]:[\\/]*) ;;
+ *)
+ func_fatal_error "only absolute run-paths are allowed"
+ ;;
+ esac
+ if test "$prev" = rpath; then
+ case "$rpath " in
+ *" $arg "*) ;;
+ *) func_append rpath " $arg" ;;
+ esac
+ else
+ case "$xrpath " in
+ *" $arg "*) ;;
+ *) func_append xrpath " $arg" ;;
+ esac
+ fi
+ prev=
+ continue
+ ;;
+ shrext)
+ shrext_cmds="$arg"
+ prev=
+ continue
+ ;;
+ weak)
+ func_append weak_libs " $arg"
+ prev=
+ continue
+ ;;
+ xcclinker)
+ func_append linker_flags " $qarg"
+ func_append compiler_flags " $qarg"
+ prev=
+ func_append compile_command " $qarg"
+ func_append finalize_command " $qarg"
+ continue
+ ;;
+ xcompiler)
+ func_append compiler_flags " $qarg"
+ prev=
+ func_append compile_command " $qarg"
+ func_append finalize_command " $qarg"
+ continue
+ ;;
+ xlinker)
+ func_append linker_flags " $qarg"
+ func_append compiler_flags " $wl$qarg"
+ prev=
+ func_append compile_command " $wl$qarg"
+ func_append finalize_command " $wl$qarg"
+ continue
+ ;;
+ *)
+ eval "$prev=\"\$arg\""
+ prev=
+ continue
+ ;;
+ esac
+ fi # test -n "$prev"
+
+ prevarg="$arg"
+
+ case $arg in
+ -all-static)
+ if test -n "$link_static_flag"; then
+ # See comment for -static flag below, for more details.
+ func_append compile_command " $link_static_flag"
+ func_append finalize_command " $link_static_flag"
+ fi
+ continue
+ ;;
+
+ -allow-undefined)
+ # FIXME: remove this flag sometime in the future.
+ func_fatal_error "\`-allow-undefined' must not be used because it is the default"
+ ;;
+
+ -avoid-version)
+ avoid_version=yes
+ continue
+ ;;
+
+ -bindir)
+ prev=bindir
+ continue
+ ;;
+
+ -dlopen)
+ prev=dlfiles
+ continue
+ ;;
+
+ -dlpreopen)
+ prev=dlprefiles
+ continue
+ ;;
+
+ -export-dynamic)
+ export_dynamic=yes
+ continue
+ ;;
+
+ -export-symbols | -export-symbols-regex)
+ if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
+ func_fatal_error "more than one -exported-symbols argument is not allowed"
+ fi
+ if test "X$arg" = "X-export-symbols"; then
+ prev=expsyms
+ else
+ prev=expsyms_regex
+ fi
+ continue
+ ;;
+
+ -framework)
+ prev=framework
+ continue
+ ;;
+
+ -inst-prefix-dir)
+ prev=inst_prefix
+ continue
+ ;;
+
+ # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:*
+ # so, if we see these flags be careful not to treat them like -L
+ -L[A-Z][A-Z]*:*)
+ case $with_gcc/$host in
+ no/*-*-irix* | /*-*-irix*)
+ func_append compile_command " $arg"
+ func_append finalize_command " $arg"
+ ;;
+ esac
+ continue
+ ;;
+
+ -L*)
+ func_stripname "-L" '' "$arg"
+ if test -z "$func_stripname_result"; then
+ if test "$#" -gt 0; then
+ func_fatal_error "require no space between \`-L' and \`$1'"
+ else
+ func_fatal_error "need path for \`-L' option"
+ fi
+ fi
+ func_resolve_sysroot "$func_stripname_result"
+ dir=$func_resolve_sysroot_result
+ # We need an absolute path.
+ case $dir in
+ [\\/]* | [A-Za-z]:[\\/]*) ;;
+ *)
+ absdir=`cd "$dir" && pwd`
+ test -z "$absdir" && \
+ func_fatal_error "cannot determine absolute directory name of \`$dir'"
+ dir="$absdir"
+ ;;
+ esac
+ case "$deplibs " in
+ *" -L$dir "* | *" $arg "*)
+ # Will only happen for absolute or sysroot arguments
+ ;;
+ *)
+ # Preserve sysroot, but never include relative directories
+ case $dir in
+ [\\/]* | [A-Za-z]:[\\/]* | =*) func_append deplibs " $arg" ;;
+ *) func_append deplibs " -L$dir" ;;
+ esac
+ func_append lib_search_path " $dir"
+ ;;
+ esac
+ case $host in
+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
+ testbindir=`$ECHO "$dir" | $SED 's*/lib$*/bin*'`
+ case :$dllsearchpath: in
+ *":$dir:"*) ;;
+ ::) dllsearchpath=$dir;;
+ *) func_append dllsearchpath ":$dir";;
+ esac
+ case :$dllsearchpath: in
+ *":$testbindir:"*) ;;
+ ::) dllsearchpath=$testbindir;;
+ *) func_append dllsearchpath ":$testbindir";;
+ esac
+ ;;
+ esac
+ continue
+ ;;
+
+ -l*)
+ if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
+ case $host in
+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc* | *-*-haiku*)
+ # These systems don't actually have a C or math library (as such)
+ continue
+ ;;
+ *-*-os2*)
+ # These systems don't actually have a C library (as such)
+ test "X$arg" = "X-lc" && continue
+ ;;
+ *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
+ # Do not include libc due to us having libc/libc_r.
+ test "X$arg" = "X-lc" && continue
+ ;;
+ *-*-rhapsody* | *-*-darwin1.[012])
+ # Rhapsody C and math libraries are in the System framework
+ func_append deplibs " System.ltframework"
+ continue
+ ;;
+ *-*-sco3.2v5* | *-*-sco5v6*)
+ # Causes problems with __ctype
+ test "X$arg" = "X-lc" && continue
+ ;;
+ *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
+ # Compiler inserts libc in the correct place for threads to work
+ test "X$arg" = "X-lc" && continue
+ ;;
+ esac
+ elif test "X$arg" = "X-lc_r"; then
+ case $host in
+ *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
+ # Do not include libc_r directly, use -pthread flag.
+ continue
+ ;;
+ esac
+ fi
+ func_append deplibs " $arg"
+ continue
+ ;;
+
+ -module)
+ module=yes
+ continue
+ ;;
+
+ # Tru64 UNIX uses -model [arg] to determine the layout of C++
+ # classes, name mangling, and exception handling.
+ # Darwin uses the -arch flag to determine output architecture.
+ -model|-arch|-isysroot|--sysroot)
+ func_append compiler_flags " $arg"
+ func_append compile_command " $arg"
+ func_append finalize_command " $arg"
+ prev=xcompiler
+ continue
+ ;;
+
+ -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \
+ |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*)
+ func_append compiler_flags " $arg"
+ func_append compile_command " $arg"
+ func_append finalize_command " $arg"
+ case "$new_inherited_linker_flags " in
+ *" $arg "*) ;;
+ * ) func_append new_inherited_linker_flags " $arg" ;;
+ esac
+ continue
+ ;;
+
+ -multi_module)
+ single_module="${wl}-multi_module"
+ continue
+ ;;
+
+ -no-fast-install)
+ fast_install=no
+ continue
+ ;;
+
+ -no-install)
+ case $host in
+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin* | *-cegcc*)
+ # The PATH hackery in wrapper scripts is required on Windows
+ # and Darwin in order for the loader to find any dlls it needs.
+ func_warning "\`-no-install' is ignored for $host"
+ func_warning "assuming \`-no-fast-install' instead"
+ fast_install=no
+ ;;
+ *) no_install=yes ;;
+ esac
+ continue
+ ;;
+
+ -no-undefined)
+ allow_undefined=no
+ continue
+ ;;
+
+ -objectlist)
+ prev=objectlist
+ continue
+ ;;
+
+ -o) prev=output ;;
+
+ -precious-files-regex)
+ prev=precious_regex
+ continue
+ ;;
+
+ -release)
+ prev=release
+ continue
+ ;;
+
+ -rpath)
+ prev=rpath
+ continue
+ ;;
+
+ -R)
+ prev=xrpath
+ continue
+ ;;
+
+ -R*)
+ func_stripname '-R' '' "$arg"
+ dir=$func_stripname_result
+ # We need an absolute path.
+ case $dir in
+ [\\/]* | [A-Za-z]:[\\/]*) ;;
+ =*)
+ func_stripname '=' '' "$dir"
+ dir=$lt_sysroot$func_stripname_result
+ ;;
+ *)
+ func_fatal_error "only absolute run-paths are allowed"
+ ;;
+ esac
+ case "$xrpath " in
+ *" $dir "*) ;;
+ *) func_append xrpath " $dir" ;;
+ esac
+ continue
+ ;;
+
+ -shared)
+ # The effects of -shared are defined in a previous loop.
+ continue
+ ;;
+
+ -shrext)
+ prev=shrext
+ continue
+ ;;
+
+ -static | -static-libtool-libs)
+ # The effects of -static are defined in a previous loop.
+ # We used to do the same as -all-static on platforms that
+ # didn't have a PIC flag, but the assumption that the effects
+ # would be equivalent was wrong. It would break on at least
+ # Digital Unix and AIX.
+ continue
+ ;;
+
+ -thread-safe)
+ thread_safe=yes
+ continue
+ ;;
+
+ -version-info)
+ prev=vinfo
+ continue
+ ;;
+
+ -version-number)
+ prev=vinfo
+ vinfo_number=yes
+ continue
+ ;;
+
+ -weak)
+ prev=weak
+ continue
+ ;;
+
+ -Wc,*)
+ func_stripname '-Wc,' '' "$arg"
+ args=$func_stripname_result
+ arg=
+ save_ifs="$IFS"; IFS=','
+ for flag in $args; do
+ IFS="$save_ifs"
+ func_quote_for_eval "$flag"
+ func_append arg " $func_quote_for_eval_result"
+ func_append compiler_flags " $func_quote_for_eval_result"
+ done
+ IFS="$save_ifs"
+ func_stripname ' ' '' "$arg"
+ arg=$func_stripname_result
+ ;;
+
+ -Wl,*)
+ func_stripname '-Wl,' '' "$arg"
+ args=$func_stripname_result
+ arg=
+ save_ifs="$IFS"; IFS=','
+ for flag in $args; do
+ IFS="$save_ifs"
+ func_quote_for_eval "$flag"
+ func_append arg " $wl$func_quote_for_eval_result"
+ func_append compiler_flags " $wl$func_quote_for_eval_result"
+ func_append linker_flags " $func_quote_for_eval_result"
+ done
+ IFS="$save_ifs"
+ func_stripname ' ' '' "$arg"
+ arg=$func_stripname_result
+ ;;
+
+ -Xcompiler)
+ prev=xcompiler
+ continue
+ ;;
+
+ -Xlinker)
+ prev=xlinker
+ continue
+ ;;
+
+ -XCClinker)
+ prev=xcclinker
+ continue
+ ;;
+
+ # -msg_* for osf cc
+ -msg_*)
+ func_quote_for_eval "$arg"
+ arg="$func_quote_for_eval_result"
+ ;;
+
+ # Flags to be passed through unchanged, with rationale:
+ # -64, -mips[0-9] enable 64-bit mode for the SGI compiler
+ # -r[0-9][0-9]* specify processor for the SGI compiler
+ # -xarch=*, -xtarget=* enable 64-bit mode for the Sun compiler
+ # +DA*, +DD* enable 64-bit mode for the HP compiler
+ # -q* compiler args for the IBM compiler
+ # -m*, -t[45]*, -txscale* architecture-specific flags for GCC
+ # -F/path path to uninstalled frameworks, gcc on darwin
+ # -p, -pg, --coverage, -fprofile-* profiling flags for GCC
+ # @file GCC response files
+ # -tp=* Portland pgcc target processor selection
+ # --sysroot=* for sysroot support
+ # -O*, -flto*, -fwhopr*, -fuse-linker-plugin GCC link-time optimization
+ -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \
+ -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*|-tp=*|--sysroot=*| \
+ -O*|-flto*|-fwhopr*|-fuse-linker-plugin)
+ func_quote_for_eval "$arg"
+ arg="$func_quote_for_eval_result"
+ func_append compile_command " $arg"
+ func_append finalize_command " $arg"
+ func_append compiler_flags " $arg"
+ continue
+ ;;
+
+ # Some other compiler flag.
+ -* | +*)
+ func_quote_for_eval "$arg"
+ arg="$func_quote_for_eval_result"
+ ;;
+
+ *.$objext)
+ # A standard object.
+ func_append objs " $arg"
+ ;;
+
+ *.lo)
+ # A libtool-controlled object.
+
+ # Check to see that this really is a libtool object.
+ if func_lalib_unsafe_p "$arg"; then
+ pic_object=
+ non_pic_object=
+
+ # Read the .lo file
+ func_source "$arg"
+
+ if test -z "$pic_object" ||
+ test -z "$non_pic_object" ||
+ test "$pic_object" = none &&
+ test "$non_pic_object" = none; then
+ func_fatal_error "cannot find name of object for \`$arg'"
+ fi
+
+ # Extract subdirectory from the argument.
+ func_dirname "$arg" "/" ""
+ xdir="$func_dirname_result"
+
+ if test "$pic_object" != none; then
+ # Prepend the subdirectory the object is found in.
+ pic_object="$xdir$pic_object"
+
+ if test "$prev" = dlfiles; then
+ if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
+ func_append dlfiles " $pic_object"
+ prev=
+ continue
+ else
+ # If libtool objects are unsupported, then we need to preload.
+ prev=dlprefiles
+ fi
+ fi
+
+ # CHECK ME: I think I busted this. -Ossama
+ if test "$prev" = dlprefiles; then
+ # Preload the old-style object.
+ func_append dlprefiles " $pic_object"
+ prev=
+ fi
+
+ # A PIC object.
+ func_append libobjs " $pic_object"
+ arg="$pic_object"
+ fi
+
+ # Non-PIC object.
+ if test "$non_pic_object" != none; then
+ # Prepend the subdirectory the object is found in.
+ non_pic_object="$xdir$non_pic_object"
+
+ # A standard non-PIC object
+ func_append non_pic_objects " $non_pic_object"
+ if test -z "$pic_object" || test "$pic_object" = none ; then
+ arg="$non_pic_object"
+ fi
+ else
+ # If the PIC object exists, use it instead.
+ # $xdir was prepended to $pic_object above.
+ non_pic_object="$pic_object"
+ func_append non_pic_objects " $non_pic_object"
+ fi
+ else
+ # Only an error if not doing a dry-run.
+ if $opt_dry_run; then
+ # Extract subdirectory from the argument.
+ func_dirname "$arg" "/" ""
+ xdir="$func_dirname_result"
+
+ func_lo2o "$arg"
+ pic_object=$xdir$objdir/$func_lo2o_result
+ non_pic_object=$xdir$func_lo2o_result
+ func_append libobjs " $pic_object"
+ func_append non_pic_objects " $non_pic_object"
+ else
+ func_fatal_error "\`$arg' is not a valid libtool object"
+ fi
+ fi
+ ;;
+
+ *.$libext)
+ # An archive.
+ func_append deplibs " $arg"
+ func_append old_deplibs " $arg"
+ continue
+ ;;
+
+ *.la)
+ # A libtool-controlled library.
+
+ func_resolve_sysroot "$arg"
+ if test "$prev" = dlfiles; then
+ # This library was specified with -dlopen.
+ func_append dlfiles " $func_resolve_sysroot_result"
+ prev=
+ elif test "$prev" = dlprefiles; then
+ # The library was specified with -dlpreopen.
+ func_append dlprefiles " $func_resolve_sysroot_result"
+ prev=
+ else
+ func_append deplibs " $func_resolve_sysroot_result"
+ fi
+ continue
+ ;;
+
+ # Some other compiler argument.
+ *)
+ # Unknown arguments in both finalize_command and compile_command need
+ # to be aesthetically quoted because they are evaled later.
+ func_quote_for_eval "$arg"
+ arg="$func_quote_for_eval_result"
+ ;;
+ esac # arg
+
+ # Now actually substitute the argument into the commands.
+ if test -n "$arg"; then
+ func_append compile_command " $arg"
+ func_append finalize_command " $arg"
+ fi
+ done # argument parsing loop
+
+ test -n "$prev" && \
+ func_fatal_help "the \`$prevarg' option requires an argument"
+
+ if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
+ eval arg=\"$export_dynamic_flag_spec\"
+ func_append compile_command " $arg"
+ func_append finalize_command " $arg"
+ fi
+
+ oldlibs=
+ # calculate the name of the file, without its directory
+ func_basename "$output"
+ outputname="$func_basename_result"
+ libobjs_save="$libobjs"
+
+ if test -n "$shlibpath_var"; then
+ # get the directories listed in $shlibpath_var
+ eval shlib_search_path=\`\$ECHO \"\${$shlibpath_var}\" \| \$SED \'s/:/ /g\'\`
+ else
+ shlib_search_path=
+ fi
+ eval sys_lib_search_path=\"$sys_lib_search_path_spec\"
+ eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
+
+ func_dirname "$output" "/" ""
+ output_objdir="$func_dirname_result$objdir"
+ func_to_tool_file "$output_objdir/"
+ tool_output_objdir=$func_to_tool_file_result
+ # Create the object directory.
+ func_mkdir_p "$output_objdir"
+
+ # Determine the type of output
+ case $output in
+ "")
+ func_fatal_help "you must specify an output file"
+ ;;
+ *.$libext) linkmode=oldlib ;;
+ *.lo | *.$objext) linkmode=obj ;;
+ *.la) linkmode=lib ;;
+ *) linkmode=prog ;; # Anything else should be a program.
+ esac
+
+ specialdeplibs=
+
+ libs=
+ # Find all interdependent deplibs by searching for libraries
+ # that are linked more than once (e.g. -la -lb -la)
+ for deplib in $deplibs; do
+ if $opt_preserve_dup_deps ; then
+ case "$libs " in
+ *" $deplib "*) func_append specialdeplibs " $deplib" ;;
+ esac
+ fi
+ func_append libs " $deplib"
+ done
+
+ if test "$linkmode" = lib; then
+ libs="$predeps $libs $compiler_lib_search_path $postdeps"
+
+ # Compute libraries that are listed more than once in $predeps
+ # $postdeps and mark them as special (i.e., whose duplicates are
+ # not to be eliminated).
+ pre_post_deps=
+ if $opt_duplicate_compiler_generated_deps; then
+ for pre_post_dep in $predeps $postdeps; do
+ case "$pre_post_deps " in
+ *" $pre_post_dep "*) func_append specialdeplibs " $pre_post_deps" ;;
+ esac
+ func_append pre_post_deps " $pre_post_dep"
+ done
+ fi
+ pre_post_deps=
+ fi
+
+ deplibs=
+ newdependency_libs=
+ newlib_search_path=
+ need_relink=no # whether we're linking any uninstalled libtool libraries
+ notinst_deplibs= # not-installed libtool libraries
+ notinst_path= # paths that contain not-installed libtool libraries
+
+ case $linkmode in
+ lib)
+ passes="conv dlpreopen link"
+ for file in $dlfiles $dlprefiles; do
+ case $file in
+ *.la) ;;
+ *)
+ func_fatal_help "libraries can \`-dlopen' only libtool libraries: $file"
+ ;;
+ esac
+ done
+ ;;
+ prog)
+ compile_deplibs=
+ finalize_deplibs=
+ alldeplibs=no
+ newdlfiles=
+ newdlprefiles=
+ passes="conv scan dlopen dlpreopen link"
+ ;;
+ *) passes="conv"
+ ;;
+ esac
+
+ for pass in $passes; do
+ # The preopen pass in lib mode reverses $deplibs; put it back here
+ # so that -L comes before libs that need it for instance...
+ if test "$linkmode,$pass" = "lib,link"; then
+ ## FIXME: Find the place where the list is rebuilt in the wrong
+ ## order, and fix it there properly
+ tmp_deplibs=
+ for deplib in $deplibs; do
+ tmp_deplibs="$deplib $tmp_deplibs"
+ done
+ deplibs="$tmp_deplibs"
+ fi
+
+ if test "$linkmode,$pass" = "lib,link" ||
+ test "$linkmode,$pass" = "prog,scan"; then
+ libs="$deplibs"
+ deplibs=
+ fi
+ if test "$linkmode" = prog; then
+ case $pass in
+ dlopen) libs="$dlfiles" ;;
+ dlpreopen) libs="$dlprefiles" ;;
+ link) libs="$deplibs %DEPLIBS% $dependency_libs" ;;
+ esac
+ fi
+ if test "$linkmode,$pass" = "lib,dlpreopen"; then
+ # Collect and forward deplibs of preopened libtool libs
+ for lib in $dlprefiles; do
+ # Ignore non-libtool-libs
+ dependency_libs=
+ func_resolve_sysroot "$lib"
+ case $lib in
+ *.la) func_source "$func_resolve_sysroot_result" ;;
+ esac
+
+ # Collect preopened libtool deplibs, except any this library
+ # has declared as weak libs
+ for deplib in $dependency_libs; do
+ func_basename "$deplib"
+ deplib_base=$func_basename_result
+ case " $weak_libs " in
+ *" $deplib_base "*) ;;
+ *) func_append deplibs " $deplib" ;;
+ esac
+ done
+ done
+ libs="$dlprefiles"
+ fi
+ if test "$pass" = dlopen; then
+ # Collect dlpreopened libraries
+ save_deplibs="$deplibs"
+ deplibs=
+ fi
+
+ for deplib in $libs; do
+ lib=
+ found=no
+ case $deplib in
+ -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \
+ |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*)
+ if test "$linkmode,$pass" = "prog,link"; then
+ compile_deplibs="$deplib $compile_deplibs"
+ finalize_deplibs="$deplib $finalize_deplibs"
+ else
+ func_append compiler_flags " $deplib"
+ if test "$linkmode" = lib ; then
+ case "$new_inherited_linker_flags " in
+ *" $deplib "*) ;;
+ * ) func_append new_inherited_linker_flags " $deplib" ;;
+ esac
+ fi
+ fi
+ continue
+ ;;
+ -l*)
+ if test "$linkmode" != lib && test "$linkmode" != prog; then
+ func_warning "\`-l' is ignored for archives/objects"
+ continue
+ fi
+ func_stripname '-l' '' "$deplib"
+ name=$func_stripname_result
+ if test "$linkmode" = lib; then
+ searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path"
+ else
+ searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path"
+ fi
+ for searchdir in $searchdirs; do
+ for search_ext in .la $std_shrext .so .a; do
+ # Search the libtool library
+ lib="$searchdir/lib${name}${search_ext}"
+ if test -f "$lib"; then
+ if test "$search_ext" = ".la"; then
+ found=yes
+ else
+ found=no
+ fi
+ break 2
+ fi
+ done
+ done
+ if test "$found" != yes; then
+ # deplib doesn't seem to be a libtool library
+ if test "$linkmode,$pass" = "prog,link"; then
+ compile_deplibs="$deplib $compile_deplibs"
+ finalize_deplibs="$deplib $finalize_deplibs"
+ else
+ deplibs="$deplib $deplibs"
+ test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
+ fi
+ continue
+ else # deplib is a libtool library
+ # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib,
+ # We need to do some special things here, and not later.
+ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+ case " $predeps $postdeps " in
+ *" $deplib "*)
+ if func_lalib_p "$lib"; then
+ library_names=
+ old_library=
+ func_source "$lib"
+ for l in $old_library $library_names; do
+ ll="$l"
+ done
+ if test "X$ll" = "X$old_library" ; then # only static version available
+ found=no
+ func_dirname "$lib" "" "."
+ ladir="$func_dirname_result"
+ lib=$ladir/$old_library
+ if test "$linkmode,$pass" = "prog,link"; then
+ compile_deplibs="$deplib $compile_deplibs"
+ finalize_deplibs="$deplib $finalize_deplibs"
+ else
+ deplibs="$deplib $deplibs"
+ test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
+ fi
+ continue
+ fi
+ fi
+ ;;
+ *) ;;
+ esac
+ fi
+ fi
+ ;; # -l
+ *.ltframework)
+ if test "$linkmode,$pass" = "prog,link"; then
+ compile_deplibs="$deplib $compile_deplibs"
+ finalize_deplibs="$deplib $finalize_deplibs"
+ else
+ deplibs="$deplib $deplibs"
+ if test "$linkmode" = lib ; then
+ case "$new_inherited_linker_flags " in
+ *" $deplib "*) ;;
+ * ) func_append new_inherited_linker_flags " $deplib" ;;
+ esac
+ fi
+ fi
+ continue
+ ;;
+ -L*)
+ case $linkmode in
+ lib)
+ deplibs="$deplib $deplibs"
+ test "$pass" = conv && continue
+ newdependency_libs="$deplib $newdependency_libs"
+ func_stripname '-L' '' "$deplib"
+ func_resolve_sysroot "$func_stripname_result"
+ func_append newlib_search_path " $func_resolve_sysroot_result"
+ ;;
+ prog)
+ if test "$pass" = conv; then
+ deplibs="$deplib $deplibs"
+ continue
+ fi
+ if test "$pass" = scan; then
+ deplibs="$deplib $deplibs"
+ else
+ compile_deplibs="$deplib $compile_deplibs"
+ finalize_deplibs="$deplib $finalize_deplibs"
+ fi
+ func_stripname '-L' '' "$deplib"
+ func_resolve_sysroot "$func_stripname_result"
+ func_append newlib_search_path " $func_resolve_sysroot_result"
+ ;;
+ *)
+ func_warning "\`-L' is ignored for archives/objects"
+ ;;
+ esac # linkmode
+ continue
+ ;; # -L
+ -R*)
+ if test "$pass" = link; then
+ func_stripname '-R' '' "$deplib"
+ func_resolve_sysroot "$func_stripname_result"
+ dir=$func_resolve_sysroot_result
+ # Make sure the xrpath contains only unique directories.
+ case "$xrpath " in
+ *" $dir "*) ;;
+ *) func_append xrpath " $dir" ;;
+ esac
+ fi
+ deplibs="$deplib $deplibs"
+ continue
+ ;;
+ *.la)
+ func_resolve_sysroot "$deplib"
+ lib=$func_resolve_sysroot_result
+ ;;
+ *.$libext)
+ if test "$pass" = conv; then
+ deplibs="$deplib $deplibs"
+ continue
+ fi
+ case $linkmode in
+ lib)
+ # Linking convenience modules into shared libraries is allowed,
+ # but linking other static libraries is non-portable.
+ case " $dlpreconveniencelibs " in
+ *" $deplib "*) ;;
+ *)
+ valid_a_lib=no
+ case $deplibs_check_method in
+ match_pattern*)
+ set dummy $deplibs_check_method; shift
+ match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
+ if eval "\$ECHO \"$deplib\"" 2>/dev/null | $SED 10q \
+ | $EGREP "$match_pattern_regex" > /dev/null; then
+ valid_a_lib=yes
+ fi
+ ;;
+ pass_all)
+ valid_a_lib=yes
+ ;;
+ esac
+ if test "$valid_a_lib" != yes; then
+ echo
+ $ECHO "*** Warning: Trying to link with static lib archive $deplib."
+ echo "*** I have the capability to make that library automatically link in when"
+ echo "*** you link to this library. But I can only do this if you have a"
+ echo "*** shared version of the library, which you do not appear to have"
+ echo "*** because the file extensions .$libext of this argument makes me believe"
+ echo "*** that it is just a static archive that I should not use here."
+ else
+ echo
+ $ECHO "*** Warning: Linking the shared library $output against the"
+ $ECHO "*** static library $deplib is not portable!"
+ deplibs="$deplib $deplibs"
+ fi
+ ;;
+ esac
+ continue
+ ;;
+ prog)
+ if test "$pass" != link; then
+ deplibs="$deplib $deplibs"
+ else
+ compile_deplibs="$deplib $compile_deplibs"
+ finalize_deplibs="$deplib $finalize_deplibs"
+ fi
+ continue
+ ;;
+ esac # linkmode
+ ;; # *.$libext
+ *.lo | *.$objext)
+ if test "$pass" = conv; then
+ deplibs="$deplib $deplibs"
+ elif test "$linkmode" = prog; then
+ if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
+ # If there is no dlopen support or we're linking statically,
+ # we need to preload.
+ func_append newdlprefiles " $deplib"
+ compile_deplibs="$deplib $compile_deplibs"
+ finalize_deplibs="$deplib $finalize_deplibs"
+ else
+ func_append newdlfiles " $deplib"
+ fi
+ fi
+ continue
+ ;;
+ %DEPLIBS%)
+ alldeplibs=yes
+ continue
+ ;;
+ esac # case $deplib
+
+ if test "$found" = yes || test -f "$lib"; then :
+ else
+ func_fatal_error "cannot find the library \`$lib' or unhandled argument \`$deplib'"
+ fi
+
+ # Check to see that this really is a libtool archive.
+ func_lalib_unsafe_p "$lib" \
+ || func_fatal_error "\`$lib' is not a valid libtool archive"
+
+ func_dirname "$lib" "" "."
+ ladir="$func_dirname_result"
+
+ dlname=
+ dlopen=
+ dlpreopen=
+ libdir=
+ library_names=
+ old_library=
+ inherited_linker_flags=
+ # If the library was installed with an old release of libtool,
+ # it will not redefine variables installed, or shouldnotlink
+ installed=yes
+ shouldnotlink=no
+ avoidtemprpath=
+
+
+ # Read the .la file
+ func_source "$lib"
+
+ # Convert "-framework foo" to "foo.ltframework"
+ if test -n "$inherited_linker_flags"; then
+ tmp_inherited_linker_flags=`$ECHO "$inherited_linker_flags" | $SED 's/-framework \([^ $]*\)/\1.ltframework/g'`
+ for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do
+ case " $new_inherited_linker_flags " in
+ *" $tmp_inherited_linker_flag "*) ;;
+ *) func_append new_inherited_linker_flags " $tmp_inherited_linker_flag";;
+ esac
+ done
+ fi
+ dependency_libs=`$ECHO " $dependency_libs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+ if test "$linkmode,$pass" = "lib,link" ||
+ test "$linkmode,$pass" = "prog,scan" ||
+ { test "$linkmode" != prog && test "$linkmode" != lib; }; then
+ test -n "$dlopen" && func_append dlfiles " $dlopen"
+ test -n "$dlpreopen" && func_append dlprefiles " $dlpreopen"
+ fi
+
+ if test "$pass" = conv; then
+ # Only check for convenience libraries
+ deplibs="$lib $deplibs"
+ if test -z "$libdir"; then
+ if test -z "$old_library"; then
+ func_fatal_error "cannot find name of link library for \`$lib'"
+ fi
+ # It is a libtool convenience library, so add in its objects.
+ func_append convenience " $ladir/$objdir/$old_library"
+ func_append old_convenience " $ladir/$objdir/$old_library"
+ elif test "$linkmode" != prog && test "$linkmode" != lib; then
+ func_fatal_error "\`$lib' is not a convenience library"
+ fi
+ tmp_libs=
+ for deplib in $dependency_libs; do
+ deplibs="$deplib $deplibs"
+ if $opt_preserve_dup_deps ; then
+ case "$tmp_libs " in
+ *" $deplib "*) func_append specialdeplibs " $deplib" ;;
+ esac
+ fi
+ func_append tmp_libs " $deplib"
+ done
+ continue
+ fi # $pass = conv
+
+
+ # Get the name of the library we link against.
+ linklib=
+ if test -n "$old_library" &&
+ { test "$prefer_static_libs" = yes ||
+ test "$prefer_static_libs,$installed" = "built,no"; }; then
+ linklib=$old_library
+ else
+ for l in $old_library $library_names; do
+ linklib="$l"
+ done
+ fi
+ if test -z "$linklib"; then
+ func_fatal_error "cannot find name of link library for \`$lib'"
+ fi
+
+ # This library was specified with -dlopen.
+ if test "$pass" = dlopen; then
+ if test -z "$libdir"; then
+ func_fatal_error "cannot -dlopen a convenience library: \`$lib'"
+ fi
+ if test -z "$dlname" ||
+ test "$dlopen_support" != yes ||
+ test "$build_libtool_libs" = no; then
+ # If there is no dlname, no dlopen support or we're linking
+ # statically, we need to preload. We also need to preload any
+ # dependent libraries so libltdl's deplib preloader doesn't
+ # bomb out in the load deplibs phase.
+ func_append dlprefiles " $lib $dependency_libs"
+ else
+ func_append newdlfiles " $lib"
+ fi
+ continue
+ fi # $pass = dlopen
+
+ # We need an absolute path.
+ case $ladir in
+ [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;;
+ *)
+ abs_ladir=`cd "$ladir" && pwd`
+ if test -z "$abs_ladir"; then
+ func_warning "cannot determine absolute directory name of \`$ladir'"
+ func_warning "passing it literally to the linker, although it might fail"
+ abs_ladir="$ladir"
+ fi
+ ;;
+ esac
+ func_basename "$lib"
+ laname="$func_basename_result"
+
+ # Find the relevant object directory and library name.
+ if test "X$installed" = Xyes; then
+ if test ! -f "$lt_sysroot$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
+ func_warning "library \`$lib' was moved."
+ dir="$ladir"
+ absdir="$abs_ladir"
+ libdir="$abs_ladir"
+ else
+ dir="$lt_sysroot$libdir"
+ absdir="$lt_sysroot$libdir"
+ fi
+ test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes
+ else
+ if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then
+ dir="$ladir"
+ absdir="$abs_ladir"
+ # Remove this search path later
+ func_append notinst_path " $abs_ladir"
+ else
+ dir="$ladir/$objdir"
+ absdir="$abs_ladir/$objdir"
+ # Remove this search path later
+ func_append notinst_path " $abs_ladir"
+ fi
+ fi # $installed = yes
+ func_stripname 'lib' '.la' "$laname"
+ name=$func_stripname_result
+
+ # This library was specified with -dlpreopen.
+ if test "$pass" = dlpreopen; then
+ if test -z "$libdir" && test "$linkmode" = prog; then
+ func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'"
+ fi
+ case "$host" in
+ # special handling for platforms with PE-DLLs.
+ *cygwin* | *mingw* | *cegcc* )
+ # Linker will automatically link against shared library if both
+ # static and shared are present. Therefore, ensure we extract
+ # symbols from the import library if a shared library is present
+ # (otherwise, the dlopen module name will be incorrect). We do
+ # this by putting the import library name into $newdlprefiles.
+ # We recover the dlopen module name by 'saving' the la file
+ # name in a special purpose variable, and (later) extracting the
+ # dlname from the la file.
+ if test -n "$dlname"; then
+ func_tr_sh "$dir/$linklib"
+ eval "libfile_$func_tr_sh_result=\$abs_ladir/\$laname"
+ func_append newdlprefiles " $dir/$linklib"
+ else
+ func_append newdlprefiles " $dir/$old_library"
+ # Keep a list of preopened convenience libraries to check
+ # that they are being used correctly in the link pass.
+ test -z "$libdir" && \
+ func_append dlpreconveniencelibs " $dir/$old_library"
+ fi
+ ;;
+ * )
+ # Prefer using a static library (so that no silly _DYNAMIC symbols
+ # are required to link).
+ if test -n "$old_library"; then
+ func_append newdlprefiles " $dir/$old_library"
+ # Keep a list of preopened convenience libraries to check
+ # that they are being used correctly in the link pass.
+ test -z "$libdir" && \
+ func_append dlpreconveniencelibs " $dir/$old_library"
+ # Otherwise, use the dlname, so that lt_dlopen finds it.
+ elif test -n "$dlname"; then
+ func_append newdlprefiles " $dir/$dlname"
+ else
+ func_append newdlprefiles " $dir/$linklib"
+ fi
+ ;;
+ esac
+ fi # $pass = dlpreopen
+
+ if test -z "$libdir"; then
+ # Link the convenience library
+ if test "$linkmode" = lib; then
+ deplibs="$dir/$old_library $deplibs"
+ elif test "$linkmode,$pass" = "prog,link"; then
+ compile_deplibs="$dir/$old_library $compile_deplibs"
+ finalize_deplibs="$dir/$old_library $finalize_deplibs"
+ else
+ deplibs="$lib $deplibs" # used for prog,scan pass
+ fi
+ continue
+ fi
+
+
+ if test "$linkmode" = prog && test "$pass" != link; then
+ func_append newlib_search_path " $ladir"
+ deplibs="$lib $deplibs"
+
+ linkalldeplibs=no
+ if test "$link_all_deplibs" != no || test -z "$library_names" ||
+ test "$build_libtool_libs" = no; then
+ linkalldeplibs=yes
+ fi
+
+ tmp_libs=
+ for deplib in $dependency_libs; do
+ case $deplib in
+ -L*) func_stripname '-L' '' "$deplib"
+ func_resolve_sysroot "$func_stripname_result"
+ func_append newlib_search_path " $func_resolve_sysroot_result"
+ ;;
+ esac
+ # Need to link against all dependency_libs?
+ if test "$linkalldeplibs" = yes; then
+ deplibs="$deplib $deplibs"
+ else
+ # Need to hardcode shared library paths
+ # or/and link against static libraries
+ newdependency_libs="$deplib $newdependency_libs"
+ fi
+ if $opt_preserve_dup_deps ; then
+ case "$tmp_libs " in
+ *" $deplib "*) func_append specialdeplibs " $deplib" ;;
+ esac
+ fi
+ func_append tmp_libs " $deplib"
+ done # for deplib
+ continue
+ fi # $linkmode = prog...
+
+ if test "$linkmode,$pass" = "prog,link"; then
+ if test -n "$library_names" &&
+ { { test "$prefer_static_libs" = no ||
+ test "$prefer_static_libs,$installed" = "built,yes"; } ||
+ test -z "$old_library"; }; then
+ # We need to hardcode the library path
+ if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then
+ # Make sure the rpath contains only unique directories.
+ case "$temp_rpath:" in
+ *"$absdir:"*) ;;
+ *) func_append temp_rpath "$absdir:" ;;
+ esac
+ fi
+
+ # Hardcode the library path.
+ # Skip directories that are in the system default run-time
+ # search path.
+ case " $sys_lib_dlsearch_path " in
+ *" $absdir "*) ;;
+ *)
+ case "$compile_rpath " in
+ *" $absdir "*) ;;
+ *) func_append compile_rpath " $absdir" ;;
+ esac
+ ;;
+ esac
+ case " $sys_lib_dlsearch_path " in
+ *" $libdir "*) ;;
+ *)
+ case "$finalize_rpath " in
+ *" $libdir "*) ;;
+ *) func_append finalize_rpath " $libdir" ;;
+ esac
+ ;;
+ esac
+ fi # $linkmode,$pass = prog,link...
+
+ if test "$alldeplibs" = yes &&
+ { test "$deplibs_check_method" = pass_all ||
+ { test "$build_libtool_libs" = yes &&
+ test -n "$library_names"; }; }; then
+ # We only need to search for static libraries
+ continue
+ fi
+ fi
+
+ link_static=no # Whether the deplib will be linked statically
+ use_static_libs=$prefer_static_libs
+ if test "$use_static_libs" = built && test "$installed" = yes; then
+ use_static_libs=no
+ fi
+ if test -n "$library_names" &&
+ { test "$use_static_libs" = no || test -z "$old_library"; }; then
+ case $host in
+ *cygwin* | *mingw* | *cegcc*)
+ # No point in relinking DLLs because paths are not encoded
+ func_append notinst_deplibs " $lib"
+ need_relink=no
+ ;;
+ *)
+ if test "$installed" = no; then
+ func_append notinst_deplibs " $lib"
+ need_relink=yes
+ fi
+ ;;
+ esac
+ # This is a shared library
+
+ # Warn about portability, can't link against -module's on some
+ # systems (darwin). Don't bleat about dlopened modules though!
+ dlopenmodule=""
+ for dlpremoduletest in $dlprefiles; do
+ if test "X$dlpremoduletest" = "X$lib"; then
+ dlopenmodule="$dlpremoduletest"
+ break
+ fi
+ done
+ if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then
+ echo
+ if test "$linkmode" = prog; then
+ $ECHO "*** Warning: Linking the executable $output against the loadable module"
+ else
+ $ECHO "*** Warning: Linking the shared library $output against the loadable module"
+ fi
+ $ECHO "*** $linklib is not portable!"
+ fi
+ if test "$linkmode" = lib &&
+ test "$hardcode_into_libs" = yes; then
+ # Hardcode the library path.
+ # Skip directories that are in the system default run-time
+ # search path.
+ case " $sys_lib_dlsearch_path " in
+ *" $absdir "*) ;;
+ *)
+ case "$compile_rpath " in
+ *" $absdir "*) ;;
+ *) func_append compile_rpath " $absdir" ;;
+ esac
+ ;;
+ esac
+ case " $sys_lib_dlsearch_path " in
+ *" $libdir "*) ;;
+ *)
+ case "$finalize_rpath " in
+ *" $libdir "*) ;;
+ *) func_append finalize_rpath " $libdir" ;;
+ esac
+ ;;
+ esac
+ fi
+
+ if test -n "$old_archive_from_expsyms_cmds"; then
+ # figure out the soname
+ set dummy $library_names
+ shift
+ realname="$1"
+ shift
+ libname=`eval "\\$ECHO \"$libname_spec\""`
+ # use dlname if we got it. it's perfectly good, no?
+ if test -n "$dlname"; then
+ soname="$dlname"
+ elif test -n "$soname_spec"; then
+ # bleh windows
+ case $host in
+ *cygwin* | mingw* | *cegcc*)
+ func_arith $current - $age
+ major=$func_arith_result
+ versuffix="-$major"
+ ;;
+ esac
+ eval soname=\"$soname_spec\"
+ else
+ soname="$realname"
+ fi
+
+ # Make a new name for the extract_expsyms_cmds to use
+ soroot="$soname"
+ func_basename "$soroot"
+ soname="$func_basename_result"
+ func_stripname 'lib' '.dll' "$soname"
+ newlib=libimp-$func_stripname_result.a
+
+ # If the library has no export list, then create one now
+ if test -f "$output_objdir/$soname-def"; then :
+ else
+ func_verbose "extracting exported symbol list from \`$soname'"
+ func_execute_cmds "$extract_expsyms_cmds" 'exit $?'
+ fi
+
+ # Create $newlib
+ if test -f "$output_objdir/$newlib"; then :; else
+ func_verbose "generating import library for \`$soname'"
+ func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?'
+ fi
+ # make sure the library variables are pointing to the new library
+ dir=$output_objdir
+ linklib=$newlib
+ fi # test -n "$old_archive_from_expsyms_cmds"
+
+ if test "$linkmode" = prog || test "$opt_mode" != relink; then
+ add_shlibpath=
+ add_dir=
+ add=
+ lib_linked=yes
+ case $hardcode_action in
+ immediate | unsupported)
+ if test "$hardcode_direct" = no; then
+ add="$dir/$linklib"
+ case $host in
+ *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;;
+ *-*-sysv4*uw2*) add_dir="-L$dir" ;;
+ *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \
+ *-*-unixware7*) add_dir="-L$dir" ;;
+ *-*-darwin* )
+ # if the lib is a (non-dlopened) module then we can not
+ # link against it, someone is ignoring the earlier warnings
+ if /usr/bin/file -L $add 2> /dev/null |
+ $GREP ": [^:]* bundle" >/dev/null ; then
+ if test "X$dlopenmodule" != "X$lib"; then
+ $ECHO "*** Warning: lib $linklib is a module, not a shared library"
+ if test -z "$old_library" ; then
+ echo
+ echo "*** And there doesn't seem to be a static archive available"
+ echo "*** The link will probably fail, sorry"
+ else
+ add="$dir/$old_library"
+ fi
+ elif test -n "$old_library"; then
+ add="$dir/$old_library"
+ fi
+ fi
+ esac
+ elif test "$hardcode_minus_L" = no; then
+ case $host in
+ *-*-sunos*) add_shlibpath="$dir" ;;
+ esac
+ add_dir="-L$dir"
+ add="-l$name"
+ elif test "$hardcode_shlibpath_var" = no; then
+ add_shlibpath="$dir"
+ add="-l$name"
+ else
+ lib_linked=no
+ fi
+ ;;
+ relink)
+ if test "$hardcode_direct" = yes &&
+ test "$hardcode_direct_absolute" = no; then
+ add="$dir/$linklib"
+ elif test "$hardcode_minus_L" = yes; then
+ add_dir="-L$absdir"
+ # Try looking first in the location we're being installed to.
+ if test -n "$inst_prefix_dir"; then
+ case $libdir in
+ [\\/]*)
+ func_append add_dir " -L$inst_prefix_dir$libdir"
+ ;;
+ esac
+ fi
+ add="-l$name"
+ elif test "$hardcode_shlibpath_var" = yes; then
+ add_shlibpath="$dir"
+ add="-l$name"
+ else
+ lib_linked=no
+ fi
+ ;;
+ *) lib_linked=no ;;
+ esac
+
+ if test "$lib_linked" != yes; then
+ func_fatal_configuration "unsupported hardcode properties"
+ fi
+
+ if test -n "$add_shlibpath"; then
+ case :$compile_shlibpath: in
+ *":$add_shlibpath:"*) ;;
+ *) func_append compile_shlibpath "$add_shlibpath:" ;;
+ esac
+ fi
+ if test "$linkmode" = prog; then
+ test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs"
+ test -n "$add" && compile_deplibs="$add $compile_deplibs"
+ else
+ test -n "$add_dir" && deplibs="$add_dir $deplibs"
+ test -n "$add" && deplibs="$add $deplibs"
+ if test "$hardcode_direct" != yes &&
+ test "$hardcode_minus_L" != yes &&
+ test "$hardcode_shlibpath_var" = yes; then
+ case :$finalize_shlibpath: in
+ *":$libdir:"*) ;;
+ *) func_append finalize_shlibpath "$libdir:" ;;
+ esac
+ fi
+ fi
+ fi
+
+ if test "$linkmode" = prog || test "$opt_mode" = relink; then
+ add_shlibpath=
+ add_dir=
+ add=
+ # Finalize command for both is simple: just hardcode it.
+ if test "$hardcode_direct" = yes &&
+ test "$hardcode_direct_absolute" = no; then
+ add="$libdir/$linklib"
+ elif test "$hardcode_minus_L" = yes; then
+ add_dir="-L$libdir"
+ add="-l$name"
+ elif test "$hardcode_shlibpath_var" = yes; then
+ case :$finalize_shlibpath: in
+ *":$libdir:"*) ;;
+ *) func_append finalize_shlibpath "$libdir:" ;;
+ esac
+ add="-l$name"
+ elif test "$hardcode_automatic" = yes; then
+ if test -n "$inst_prefix_dir" &&
+ test -f "$inst_prefix_dir$libdir/$linklib" ; then
+ add="$inst_prefix_dir$libdir/$linklib"
+ else
+ add="$libdir/$linklib"
+ fi
+ else
+ # We cannot seem to hardcode it, guess we'll fake it.
+ add_dir="-L$libdir"
+ # Try looking first in the location we're being installed to.
+ if test -n "$inst_prefix_dir"; then
+ case $libdir in
+ [\\/]*)
+ func_append add_dir " -L$inst_prefix_dir$libdir"
+ ;;
+ esac
+ fi
+ add="-l$name"
+ fi
+
+ if test "$linkmode" = prog; then
+ test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs"
+ test -n "$add" && finalize_deplibs="$add $finalize_deplibs"
+ else
+ test -n "$add_dir" && deplibs="$add_dir $deplibs"
+ test -n "$add" && deplibs="$add $deplibs"
+ fi
+ fi
+ elif test "$linkmode" = prog; then
+ # Here we assume that one of hardcode_direct or hardcode_minus_L
+ # is not unsupported. This is valid on all known static and
+ # shared platforms.
+ if test "$hardcode_direct" != unsupported; then
+ test -n "$old_library" && linklib="$old_library"
+ compile_deplibs="$dir/$linklib $compile_deplibs"
+ finalize_deplibs="$dir/$linklib $finalize_deplibs"
+ else
+ compile_deplibs="-l$name -L$dir $compile_deplibs"
+ finalize_deplibs="-l$name -L$dir $finalize_deplibs"
+ fi
+ elif test "$build_libtool_libs" = yes; then
+ # Not a shared library
+ if test "$deplibs_check_method" != pass_all; then
+ # We're trying link a shared library against a static one
+ # but the system doesn't support it.
+
+ # Just print a warning and add the library to dependency_libs so
+ # that the program can be linked against the static library.
+ echo
+ $ECHO "*** Warning: This system can not link to static lib archive $lib."
+ echo "*** I have the capability to make that library automatically link in when"
+ echo "*** you link to this library. But I can only do this if you have a"
+ echo "*** shared version of the library, which you do not appear to have."
+ if test "$module" = yes; then
+ echo "*** But as you try to build a module library, libtool will still create "
+ echo "*** a static module, that should work as long as the dlopening application"
+ echo "*** is linked with the -dlopen flag to resolve symbols at runtime."
+ if test -z "$global_symbol_pipe"; then
+ echo
+ echo "*** However, this would only work if libtool was able to extract symbol"
+ echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
+ echo "*** not find such a program. So, this module is probably useless."
+ echo "*** \`nm' from GNU binutils and a full rebuild may help."
+ fi
+ if test "$build_old_libs" = no; then
+ build_libtool_libs=module
+ build_old_libs=yes
+ else
+ build_libtool_libs=no
+ fi
+ fi
+ else
+ deplibs="$dir/$old_library $deplibs"
+ link_static=yes
+ fi
+ fi # link shared/static library?
+
+ if test "$linkmode" = lib; then
+ if test -n "$dependency_libs" &&
+ { test "$hardcode_into_libs" != yes ||
+ test "$build_old_libs" = yes ||
+ test "$link_static" = yes; }; then
+ # Extract -R from dependency_libs
+ temp_deplibs=
+ for libdir in $dependency_libs; do
+ case $libdir in
+ -R*) func_stripname '-R' '' "$libdir"
+ temp_xrpath=$func_stripname_result
+ case " $xrpath " in
+ *" $temp_xrpath "*) ;;
+ *) func_append xrpath " $temp_xrpath";;
+ esac;;
+ *) func_append temp_deplibs " $libdir";;
+ esac
+ done
+ dependency_libs="$temp_deplibs"
+ fi
+
+ func_append newlib_search_path " $absdir"
+ # Link against this library
+ test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
+ # ... and its dependency_libs
+ tmp_libs=
+ for deplib in $dependency_libs; do
+ newdependency_libs="$deplib $newdependency_libs"
+ case $deplib in
+ -L*) func_stripname '-L' '' "$deplib"
+ func_resolve_sysroot "$func_stripname_result";;
+ *) func_resolve_sysroot "$deplib" ;;
+ esac
+ if $opt_preserve_dup_deps ; then
+ case "$tmp_libs " in
+ *" $func_resolve_sysroot_result "*)
+ func_append specialdeplibs " $func_resolve_sysroot_result" ;;
+ esac
+ fi
+ func_append tmp_libs " $func_resolve_sysroot_result"
+ done
+
+ if test "$link_all_deplibs" != no; then
+ # Add the search paths of all dependency libraries
+ for deplib in $dependency_libs; do
+ path=
+ case $deplib in
+ -L*) path="$deplib" ;;
+ *.la)
+ func_resolve_sysroot "$deplib"
+ deplib=$func_resolve_sysroot_result
+ func_dirname "$deplib" "" "."
+ dir=$func_dirname_result
+ # We need an absolute path.
+ case $dir in
+ [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;;
+ *)
+ absdir=`cd "$dir" && pwd`
+ if test -z "$absdir"; then
+ func_warning "cannot determine absolute directory name of \`$dir'"
+ absdir="$dir"
+ fi
+ ;;
+ esac
+ if $GREP "^installed=no" $deplib > /dev/null; then
+ case $host in
+ *-*-darwin*)
+ depdepl=
+ eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
+ if test -n "$deplibrary_names" ; then
+ for tmp in $deplibrary_names ; do
+ depdepl=$tmp
+ done
+ if test -f "$absdir/$objdir/$depdepl" ; then
+ depdepl="$absdir/$objdir/$depdepl"
+ darwin_install_name=`${OTOOL} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
+ if test -z "$darwin_install_name"; then
+ darwin_install_name=`${OTOOL64} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
+ fi
+ func_append compiler_flags " ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}"
+ func_append linker_flags " -dylib_file ${darwin_install_name}:${depdepl}"
+ path=
+ fi
+ fi
+ ;;
+ *)
+ path="-L$absdir/$objdir"
+ ;;
+ esac
+ else
+ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
+ test -z "$libdir" && \
+ func_fatal_error "\`$deplib' is not a valid libtool archive"
+ test "$absdir" != "$libdir" && \
+ func_warning "\`$deplib' seems to be moved"
+
+ path="-L$absdir"
+ fi
+ ;;
+ esac
+ case " $deplibs " in
+ *" $path "*) ;;
+ *) deplibs="$path $deplibs" ;;
+ esac
+ done
+ fi # link_all_deplibs != no
+ fi # linkmode = lib
+ done # for deplib in $libs
+ if test "$pass" = link; then
+ if test "$linkmode" = "prog"; then
+ compile_deplibs="$new_inherited_linker_flags $compile_deplibs"
+ finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs"
+ else
+ compiler_flags="$compiler_flags "`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+ fi
+ fi
+ dependency_libs="$newdependency_libs"
+ if test "$pass" = dlpreopen; then
+ # Link the dlpreopened libraries before other libraries
+ for deplib in $save_deplibs; do
+ deplibs="$deplib $deplibs"
+ done
+ fi
+ if test "$pass" != dlopen; then
+ if test "$pass" != conv; then
+ # Make sure lib_search_path contains only unique directories.
+ lib_search_path=
+ for dir in $newlib_search_path; do
+ case "$lib_search_path " in
+ *" $dir "*) ;;
+ *) func_append lib_search_path " $dir" ;;
+ esac
+ done
+ newlib_search_path=
+ fi
+
+ if test "$linkmode,$pass" != "prog,link"; then
+ vars="deplibs"
+ else
+ vars="compile_deplibs finalize_deplibs"
+ fi
+ for var in $vars dependency_libs; do
+ # Add libraries to $var in reverse order
+ eval tmp_libs=\"\$$var\"
+ new_libs=
+ for deplib in $tmp_libs; do
+ # FIXME: Pedantically, this is the right thing to do, so
+ # that some nasty dependency loop isn't accidentally
+ # broken:
+ #new_libs="$deplib $new_libs"
+ # Pragmatically, this seems to cause very few problems in
+ # practice:
+ case $deplib in
+ -L*) new_libs="$deplib $new_libs" ;;
+ -R*) ;;
+ *)
+ # And here is the reason: when a library appears more
+ # than once as an explicit dependence of a library, or
+ # is implicitly linked in more than once by the
+ # compiler, it is considered special, and multiple
+ # occurrences thereof are not removed. Compare this
+ # with having the same library being listed as a
+ # dependency of multiple other libraries: in this case,
+ # we know (pedantically, we assume) the library does not
+ # need to be listed more than once, so we keep only the
+ # last copy. This is not always right, but it is rare
+ # enough that we require users that really mean to play
+ # such unportable linking tricks to link the library
+ # using -Wl,-lname, so that libtool does not consider it
+ # for duplicate removal.
+ case " $specialdeplibs " in
+ *" $deplib "*) new_libs="$deplib $new_libs" ;;
+ *)
+ case " $new_libs " in
+ *" $deplib "*) ;;
+ *) new_libs="$deplib $new_libs" ;;
+ esac
+ ;;
+ esac
+ ;;
+ esac
+ done
+ tmp_libs=
+ for deplib in $new_libs; do
+ case $deplib in
+ -L*)
+ case " $tmp_libs " in
+ *" $deplib "*) ;;
+ *) func_append tmp_libs " $deplib" ;;
+ esac
+ ;;
+ *) func_append tmp_libs " $deplib" ;;
+ esac
+ done
+ eval $var=\"$tmp_libs\"
+ done # for var
+ fi
+ # Last step: remove runtime libs from dependency_libs
+ # (they stay in deplibs)
+ tmp_libs=
+ for i in $dependency_libs ; do
+ case " $predeps $postdeps $compiler_lib_search_path " in
+ *" $i "*)
+ i=""
+ ;;
+ esac
+ if test -n "$i" ; then
+ func_append tmp_libs " $i"
+ fi
+ done
+ dependency_libs=$tmp_libs
+ done # for pass
+ if test "$linkmode" = prog; then
+ dlfiles="$newdlfiles"
+ fi
+ if test "$linkmode" = prog || test "$linkmode" = lib; then
+ dlprefiles="$newdlprefiles"
+ fi
+
+ case $linkmode in
+ oldlib)
+ if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+ func_warning "\`-dlopen' is ignored for archives"
+ fi
+
+ case " $deplibs" in
+ *\ -l* | *\ -L*)
+ func_warning "\`-l' and \`-L' are ignored for archives" ;;
+ esac
+
+ test -n "$rpath" && \
+ func_warning "\`-rpath' is ignored for archives"
+
+ test -n "$xrpath" && \
+ func_warning "\`-R' is ignored for archives"
+
+ test -n "$vinfo" && \
+ func_warning "\`-version-info/-version-number' is ignored for archives"
+
+ test -n "$release" && \
+ func_warning "\`-release' is ignored for archives"
+
+ test -n "$export_symbols$export_symbols_regex" && \
+ func_warning "\`-export-symbols' is ignored for archives"
+
+ # Now set the variables for building old libraries.
+ build_libtool_libs=no
+ oldlibs="$output"
+ func_append objs "$old_deplibs"
+ ;;
+
+ lib)
+ # Make sure we only generate libraries of the form `libNAME.la'.
+ case $outputname in
+ lib*)
+ func_stripname 'lib' '.la' "$outputname"
+ name=$func_stripname_result
+ eval shared_ext=\"$shrext_cmds\"
+ eval libname=\"$libname_spec\"
+ ;;
+ *)
+ test "$module" = no && \
+ func_fatal_help "libtool library \`$output' must begin with \`lib'"
+
+ if test "$need_lib_prefix" != no; then
+ # Add the "lib" prefix for modules if required
+ func_stripname '' '.la' "$outputname"
+ name=$func_stripname_result
+ eval shared_ext=\"$shrext_cmds\"
+ eval libname=\"$libname_spec\"
+ else
+ func_stripname '' '.la' "$outputname"
+ libname=$func_stripname_result
+ fi
+ ;;
+ esac
+
+ if test -n "$objs"; then
+ if test "$deplibs_check_method" != pass_all; then
+ func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs"
+ else
+ echo
+ $ECHO "*** Warning: Linking the shared library $output against the non-libtool"
+ $ECHO "*** objects $objs is not portable!"
+ func_append libobjs " $objs"
+ fi
+ fi
+
+ test "$dlself" != no && \
+ func_warning "\`-dlopen self' is ignored for libtool libraries"
+
+ set dummy $rpath
+ shift
+ test "$#" -gt 1 && \
+ func_warning "ignoring multiple \`-rpath's for a libtool library"
+
+ install_libdir="$1"
+
+ oldlibs=
+ if test -z "$rpath"; then
+ if test "$build_libtool_libs" = yes; then
+ # Building a libtool convenience library.
+ # Some compilers have problems with a `.al' extension so
+ # convenience libraries should have the same extension an
+ # archive normally would.
+ oldlibs="$output_objdir/$libname.$libext $oldlibs"
+ build_libtool_libs=convenience
+ build_old_libs=yes
+ fi
+
+ test -n "$vinfo" && \
+ func_warning "\`-version-info/-version-number' is ignored for convenience libraries"
+
+ test -n "$release" && \
+ func_warning "\`-release' is ignored for convenience libraries"
+ else
+
+ # Parse the version information argument.
+ save_ifs="$IFS"; IFS=':'
+ set dummy $vinfo 0 0 0
+ shift
+ IFS="$save_ifs"
+
+ test -n "$7" && \
+ func_fatal_help "too many parameters to \`-version-info'"
+
+ # convert absolute version numbers to libtool ages
+ # this retains compatibility with .la files and attempts
+ # to make the code below a bit more comprehensible
+
+ case $vinfo_number in
+ yes)
+ number_major="$1"
+ number_minor="$2"
+ number_revision="$3"
+ #
+ # There are really only two kinds -- those that
+ # use the current revision as the major version
+ # and those that subtract age and use age as
+ # a minor version. But, then there is irix
+ # which has an extra 1 added just for fun
+ #
+ case $version_type in
+ # correct linux to gnu/linux during the next big refactor
+ darwin|linux|osf|windows|none)
+ func_arith $number_major + $number_minor
+ current=$func_arith_result
+ age="$number_minor"
+ revision="$number_revision"
+ ;;
+ freebsd-aout|freebsd-elf|qnx|sunos)
+ current="$number_major"
+ revision="$number_minor"
+ age="0"
+ ;;
+ irix|nonstopux)
+ func_arith $number_major + $number_minor
+ current=$func_arith_result
+ age="$number_minor"
+ revision="$number_minor"
+ lt_irix_increment=no
+ ;;
+ esac
+ ;;
+ no)
+ current="$1"
+ revision="$2"
+ age="$3"
+ ;;
+ esac
+
+ # Check that each of the things are valid numbers.
+ case $current in
+ 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
+ *)
+ func_error "CURRENT \`$current' must be a nonnegative integer"
+ func_fatal_error "\`$vinfo' is not valid version information"
+ ;;
+ esac
+
+ case $revision in
+ 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
+ *)
+ func_error "REVISION \`$revision' must be a nonnegative integer"
+ func_fatal_error "\`$vinfo' is not valid version information"
+ ;;
+ esac
+
+ case $age in
+ 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
+ *)
+ func_error "AGE \`$age' must be a nonnegative integer"
+ func_fatal_error "\`$vinfo' is not valid version information"
+ ;;
+ esac
+
+ if test "$age" -gt "$current"; then
+ func_error "AGE \`$age' is greater than the current interface number \`$current'"
+ func_fatal_error "\`$vinfo' is not valid version information"
+ fi
+
+ # Calculate the version variables.
+ major=
+ versuffix=
+ verstring=
+ case $version_type in
+ none) ;;
+
+ darwin)
+ # Like Linux, but with the current version available in
+ # verstring for coding it into the library header
+ func_arith $current - $age
+ major=.$func_arith_result
+ versuffix="$major.$age.$revision"
+ # Darwin ld doesn't like 0 for these options...
+ func_arith $current + 1
+ minor_current=$func_arith_result
+ xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision"
+ verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
+ ;;
+
+ freebsd-aout)
+ major=".$current"
+ versuffix=".$current.$revision";
+ ;;
+
+ freebsd-elf)
+ major=".$current"
+ versuffix=".$current"
+ ;;
+
+ irix | nonstopux)
+ if test "X$lt_irix_increment" = "Xno"; then
+ func_arith $current - $age
+ else
+ func_arith $current - $age + 1
+ fi
+ major=$func_arith_result
+
+ case $version_type in
+ nonstopux) verstring_prefix=nonstopux ;;
+ *) verstring_prefix=sgi ;;
+ esac
+ verstring="$verstring_prefix$major.$revision"
+
+ # Add in all the interfaces that we are compatible with.
+ loop=$revision
+ while test "$loop" -ne 0; do
+ func_arith $revision - $loop
+ iface=$func_arith_result
+ func_arith $loop - 1
+ loop=$func_arith_result
+ verstring="$verstring_prefix$major.$iface:$verstring"
+ done
+
+ # Before this point, $major must not contain `.'.
+ major=.$major
+ versuffix="$major.$revision"
+ ;;
+
+ linux) # correct to gnu/linux during the next big refactor
+ func_arith $current - $age
+ major=.$func_arith_result
+ versuffix="$major.$age.$revision"
+ ;;
+
+ osf)
+ func_arith $current - $age
+ major=.$func_arith_result
+ versuffix=".$current.$age.$revision"
+ verstring="$current.$age.$revision"
+
+ # Add in all the interfaces that we are compatible with.
+ loop=$age
+ while test "$loop" -ne 0; do
+ func_arith $current - $loop
+ iface=$func_arith_result
+ func_arith $loop - 1
+ loop=$func_arith_result
+ verstring="$verstring:${iface}.0"
+ done
+
+ # Make executables depend on our current version.
+ func_append verstring ":${current}.0"
+ ;;
+
+ qnx)
+ major=".$current"
+ versuffix=".$current"
+ ;;
+
+ sunos)
+ major=".$current"
+ versuffix=".$current.$revision"
+ ;;
+
+ windows)
+ # Use '-' rather than '.', since we only want one
+ # extension on DOS 8.3 filesystems.
+ func_arith $current - $age
+ major=$func_arith_result
+ versuffix="-$major"
+ ;;
+
+ *)
+ func_fatal_configuration "unknown library version type \`$version_type'"
+ ;;
+ esac
+
+ # Clear the version info if we defaulted, and they specified a release.
+ if test -z "$vinfo" && test -n "$release"; then
+ major=
+ case $version_type in
+ darwin)
+ # we can't check for "0.0" in archive_cmds due to quoting
+ # problems, so we reset it completely
+ verstring=
+ ;;
+ *)
+ verstring="0.0"
+ ;;
+ esac
+ if test "$need_version" = no; then
+ versuffix=
+ else
+ versuffix=".0.0"
+ fi
+ fi
+
+ # Remove version info from name if versioning should be avoided
+ if test "$avoid_version" = yes && test "$need_version" = no; then
+ major=
+ versuffix=
+ verstring=""
+ fi
+
+ # Check to see if the archive will have undefined symbols.
+ if test "$allow_undefined" = yes; then
+ if test "$allow_undefined_flag" = unsupported; then
+ func_warning "undefined symbols not allowed in $host shared libraries"
+ build_libtool_libs=no
+ build_old_libs=yes
+ fi
+ else
+ # Don't allow undefined symbols.
+ allow_undefined_flag="$no_undefined_flag"
+ fi
+
+ fi
+
+ func_generate_dlsyms "$libname" "$libname" "yes"
+ func_append libobjs " $symfileobj"
+ test "X$libobjs" = "X " && libobjs=
+
+ if test "$opt_mode" != relink; then
+ # Remove our outputs, but don't remove object files since they
+ # may have been created when compiling PIC objects.
+ removelist=
+ tempremovelist=`$ECHO "$output_objdir/*"`
+ for p in $tempremovelist; do
+ case $p in
+ *.$objext | *.gcno)
+ ;;
+ $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*)
+ if test "X$precious_files_regex" != "X"; then
+ if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1
+ then
+ continue
+ fi
+ fi
+ func_append removelist " $p"
+ ;;
+ *) ;;
+ esac
+ done
+ test -n "$removelist" && \
+ func_show_eval "${RM}r \$removelist"
+ fi
+
+ # Now set the variables for building old libraries.
+ if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then
+ func_append oldlibs " $output_objdir/$libname.$libext"
+
+ # Transform .lo files to .o files.
+ oldobjs="$objs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; $lo2o" | $NL2SP`
+ fi
+
+ # Eliminate all temporary directories.
+ #for path in $notinst_path; do
+ # lib_search_path=`$ECHO "$lib_search_path " | $SED "s% $path % %g"`
+ # deplibs=`$ECHO "$deplibs " | $SED "s% -L$path % %g"`
+ # dependency_libs=`$ECHO "$dependency_libs " | $SED "s% -L$path % %g"`
+ #done
+
+ if test -n "$xrpath"; then
+ # If the user specified any rpath flags, then add them.
+ temp_xrpath=
+ for libdir in $xrpath; do
+ func_replace_sysroot "$libdir"
+ func_append temp_xrpath " -R$func_replace_sysroot_result"
+ case "$finalize_rpath " in
+ *" $libdir "*) ;;
+ *) func_append finalize_rpath " $libdir" ;;
+ esac
+ done
+ if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then
+ dependency_libs="$temp_xrpath $dependency_libs"
+ fi
+ fi
+
+ # Make sure dlfiles contains only unique files that won't be dlpreopened
+ old_dlfiles="$dlfiles"
+ dlfiles=
+ for lib in $old_dlfiles; do
+ case " $dlprefiles $dlfiles " in
+ *" $lib "*) ;;
+ *) func_append dlfiles " $lib" ;;
+ esac
+ done
+
+ # Make sure dlprefiles contains only unique files
+ old_dlprefiles="$dlprefiles"
+ dlprefiles=
+ for lib in $old_dlprefiles; do
+ case "$dlprefiles " in
+ *" $lib "*) ;;
+ *) func_append dlprefiles " $lib" ;;
+ esac
+ done
+
+ if test "$build_libtool_libs" = yes; then
+ if test -n "$rpath"; then
+ case $host in
+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc* | *-*-haiku*)
+ # these systems don't actually have a c library (as such)!
+ ;;
+ *-*-rhapsody* | *-*-darwin1.[012])
+ # Rhapsody C library is in the System framework
+ func_append deplibs " System.ltframework"
+ ;;
+ *-*-netbsd*)
+ # Don't link with libc until the a.out ld.so is fixed.
+ ;;
+ *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
+ # Do not include libc due to us having libc/libc_r.
+ ;;
+ *-*-sco3.2v5* | *-*-sco5v6*)
+ # Causes problems with __ctype
+ ;;
+ *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
+ # Compiler inserts libc in the correct place for threads to work
+ ;;
+ *)
+ # Add libc to deplibs on all other systems if necessary.
+ if test "$build_libtool_need_lc" = "yes"; then
+ func_append deplibs " -lc"
+ fi
+ ;;
+ esac
+ fi
+
+ # Transform deplibs into only deplibs that can be linked in shared.
+ name_save=$name
+ libname_save=$libname
+ release_save=$release
+ versuffix_save=$versuffix
+ major_save=$major
+ # I'm not sure if I'm treating the release correctly. I think
+ # release should show up in the -l (ie -lgmp5) so we don't want to
+ # add it in twice. Is that correct?
+ release=""
+ versuffix=""
+ major=""
+ newdeplibs=
+ droppeddeps=no
+ case $deplibs_check_method in
+ pass_all)
+ # Don't check for shared/static. Everything works.
+ # This might be a little naive. We might want to check
+ # whether the library exists or not. But this is on
+ # osf3 & osf4 and I'm not really sure... Just
+ # implementing what was already the behavior.
+ newdeplibs=$deplibs
+ ;;
+ test_compile)
+ # This code stresses the "libraries are programs" paradigm to its
+ # limits. Maybe even breaks it. We compile a program, linking it
+ # against the deplibs as a proxy for the library. Then we can check
+ # whether they linked in statically or dynamically with ldd.
+ $opt_dry_run || $RM conftest.c
+ cat > conftest.c <<EOF
+ int main() { return 0; }
+EOF
+ $opt_dry_run || $RM conftest
+ if $LTCC $LTCFLAGS -o conftest conftest.c $deplibs; then
+ ldd_output=`ldd conftest`
+ for i in $deplibs; do
+ case $i in
+ -l*)
+ func_stripname -l '' "$i"
+ name=$func_stripname_result
+ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+ case " $predeps $postdeps " in
+ *" $i "*)
+ func_append newdeplibs " $i"
+ i=""
+ ;;
+ esac
+ fi
+ if test -n "$i" ; then
+ libname=`eval "\\$ECHO \"$libname_spec\""`
+ deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
+ set dummy $deplib_matches; shift
+ deplib_match=$1
+ if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
+ func_append newdeplibs " $i"
+ else
+ droppeddeps=yes
+ echo
+ $ECHO "*** Warning: dynamic linker does not accept needed library $i."
+ echo "*** I have the capability to make that library automatically link in when"
+ echo "*** you link to this library. But I can only do this if you have a"
+ echo "*** shared version of the library, which I believe you do not have"
+ echo "*** because a test_compile did reveal that the linker did not use it for"
+ echo "*** its dynamic dependency list that programs get resolved with at runtime."
+ fi
+ fi
+ ;;
+ *)
+ func_append newdeplibs " $i"
+ ;;
+ esac
+ done
+ else
+ # Error occurred in the first compile. Let's try to salvage
+ # the situation: Compile a separate program for each library.
+ for i in $deplibs; do
+ case $i in
+ -l*)
+ func_stripname -l '' "$i"
+ name=$func_stripname_result
+ $opt_dry_run || $RM conftest
+ if $LTCC $LTCFLAGS -o conftest conftest.c $i; then
+ ldd_output=`ldd conftest`
+ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+ case " $predeps $postdeps " in
+ *" $i "*)
+ func_append newdeplibs " $i"
+ i=""
+ ;;
+ esac
+ fi
+ if test -n "$i" ; then
+ libname=`eval "\\$ECHO \"$libname_spec\""`
+ deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
+ set dummy $deplib_matches; shift
+ deplib_match=$1
+ if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
+ func_append newdeplibs " $i"
+ else
+ droppeddeps=yes
+ echo
+ $ECHO "*** Warning: dynamic linker does not accept needed library $i."
+ echo "*** I have the capability to make that library automatically link in when"
+ echo "*** you link to this library. But I can only do this if you have a"
+ echo "*** shared version of the library, which you do not appear to have"
+ echo "*** because a test_compile did reveal that the linker did not use this one"
+ echo "*** as a dynamic dependency that programs can get resolved with at runtime."
+ fi
+ fi
+ else
+ droppeddeps=yes
+ echo
+ $ECHO "*** Warning! Library $i is needed by this library but I was not able to"
+ echo "*** make it link in! You will probably need to install it or some"
+ echo "*** library that it depends on before this library will be fully"
+ echo "*** functional. Installing it before continuing would be even better."
+ fi
+ ;;
+ *)
+ func_append newdeplibs " $i"
+ ;;
+ esac
+ done
+ fi
+ ;;
+ file_magic*)
+ set dummy $deplibs_check_method; shift
+ file_magic_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
+ for a_deplib in $deplibs; do
+ case $a_deplib in
+ -l*)
+ func_stripname -l '' "$a_deplib"
+ name=$func_stripname_result
+ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+ case " $predeps $postdeps " in
+ *" $a_deplib "*)
+ func_append newdeplibs " $a_deplib"
+ a_deplib=""
+ ;;
+ esac
+ fi
+ if test -n "$a_deplib" ; then
+ libname=`eval "\\$ECHO \"$libname_spec\""`
+ if test -n "$file_magic_glob"; then
+ libnameglob=`func_echo_all "$libname" | $SED -e $file_magic_glob`
+ else
+ libnameglob=$libname
+ fi
+ test "$want_nocaseglob" = yes && nocaseglob=`shopt -p nocaseglob`
+ for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
+ if test "$want_nocaseglob" = yes; then
+ shopt -s nocaseglob
+ potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null`
+ $nocaseglob
+ else
+ potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null`
+ fi
+ for potent_lib in $potential_libs; do
+ # Follow soft links.
+ if ls -lLd "$potent_lib" 2>/dev/null |
+ $GREP " -> " >/dev/null; then
+ continue
+ fi
+ # The statement above tries to avoid entering an
+ # endless loop below, in case of cyclic links.
+ # We might still enter an endless loop, since a link
+ # loop can be closed while we follow links,
+ # but so what?
+ potlib="$potent_lib"
+ while test -h "$potlib" 2>/dev/null; do
+ potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'`
+ case $potliblink in
+ [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
+ *) potlib=`$ECHO "$potlib" | $SED 's,[^/]*$,,'`"$potliblink";;
+ esac
+ done
+ if eval $file_magic_cmd \"\$potlib\" 2>/dev/null |
+ $SED -e 10q |
+ $EGREP "$file_magic_regex" > /dev/null; then
+ func_append newdeplibs " $a_deplib"
+ a_deplib=""
+ break 2
+ fi
+ done
+ done
+ fi
+ if test -n "$a_deplib" ; then
+ droppeddeps=yes
+ echo
+ $ECHO "*** Warning: linker path does not have real file for library $a_deplib."
+ echo "*** I have the capability to make that library automatically link in when"
+ echo "*** you link to this library. But I can only do this if you have a"
+ echo "*** shared version of the library, which you do not appear to have"
+ echo "*** because I did check the linker path looking for a file starting"
+ if test -z "$potlib" ; then
+ $ECHO "*** with $libname but no candidates were found. (...for file magic test)"
+ else
+ $ECHO "*** with $libname and none of the candidates passed a file format test"
+ $ECHO "*** using a file magic. Last file checked: $potlib"
+ fi
+ fi
+ ;;
+ *)
+ # Add a -L argument.
+ func_append newdeplibs " $a_deplib"
+ ;;
+ esac
+ done # Gone through all deplibs.
+ ;;
+ match_pattern*)
+ set dummy $deplibs_check_method; shift
+ match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
+ for a_deplib in $deplibs; do
+ case $a_deplib in
+ -l*)
+ func_stripname -l '' "$a_deplib"
+ name=$func_stripname_result
+ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+ case " $predeps $postdeps " in
+ *" $a_deplib "*)
+ func_append newdeplibs " $a_deplib"
+ a_deplib=""
+ ;;
+ esac
+ fi
+ if test -n "$a_deplib" ; then
+ libname=`eval "\\$ECHO \"$libname_spec\""`
+ for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
+ potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
+ for potent_lib in $potential_libs; do
+ potlib="$potent_lib" # see symlink-check above in file_magic test
+ if eval "\$ECHO \"$potent_lib\"" 2>/dev/null | $SED 10q | \
+ $EGREP "$match_pattern_regex" > /dev/null; then
+ func_append newdeplibs " $a_deplib"
+ a_deplib=""
+ break 2
+ fi
+ done
+ done
+ fi
+ if test -n "$a_deplib" ; then
+ droppeddeps=yes
+ echo
+ $ECHO "*** Warning: linker path does not have real file for library $a_deplib."
+ echo "*** I have the capability to make that library automatically link in when"
+ echo "*** you link to this library. But I can only do this if you have a"
+ echo "*** shared version of the library, which you do not appear to have"
+ echo "*** because I did check the linker path looking for a file starting"
+ if test -z "$potlib" ; then
+ $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)"
+ else
+ $ECHO "*** with $libname and none of the candidates passed a file format test"
+ $ECHO "*** using a regex pattern. Last file checked: $potlib"
+ fi
+ fi
+ ;;
+ *)
+ # Add a -L argument.
+ func_append newdeplibs " $a_deplib"
+ ;;
+ esac
+ done # Gone through all deplibs.
+ ;;
+ none | unknown | *)
+ newdeplibs=""
+ tmp_deplibs=`$ECHO " $deplibs" | $SED 's/ -lc$//; s/ -[LR][^ ]*//g'`
+ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+ for i in $predeps $postdeps ; do
+ # can't use Xsed below, because $i might contain '/'
+ tmp_deplibs=`$ECHO " $tmp_deplibs" | $SED "s,$i,,"`
+ done
+ fi
+ case $tmp_deplibs in
+ *[!\ \ ]*)
+ echo
+ if test "X$deplibs_check_method" = "Xnone"; then
+ echo "*** Warning: inter-library dependencies are not supported in this platform."
+ else
+ echo "*** Warning: inter-library dependencies are not known to be supported."
+ fi
+ echo "*** All declared inter-library dependencies are being dropped."
+ droppeddeps=yes
+ ;;
+ esac
+ ;;
+ esac
+ versuffix=$versuffix_save
+ major=$major_save
+ release=$release_save
+ libname=$libname_save
+ name=$name_save
+
+ case $host in
+ *-*-rhapsody* | *-*-darwin1.[012])
+ # On Rhapsody replace the C library with the System framework
+ newdeplibs=`$ECHO " $newdeplibs" | $SED 's/ -lc / System.ltframework /'`
+ ;;
+ esac
+
+ if test "$droppeddeps" = yes; then
+ if test "$module" = yes; then
+ echo
+ echo "*** Warning: libtool could not satisfy all declared inter-library"
+ $ECHO "*** dependencies of module $libname. Therefore, libtool will create"
+ echo "*** a static module, that should work as long as the dlopening"
+ echo "*** application is linked with the -dlopen flag."
+ if test -z "$global_symbol_pipe"; then
+ echo
+ echo "*** However, this would only work if libtool was able to extract symbol"
+ echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
+ echo "*** not find such a program. So, this module is probably useless."
+ echo "*** \`nm' from GNU binutils and a full rebuild may help."
+ fi
+ if test "$build_old_libs" = no; then
+ oldlibs="$output_objdir/$libname.$libext"
+ build_libtool_libs=module
+ build_old_libs=yes
+ else
+ build_libtool_libs=no
+ fi
+ else
+ echo "*** The inter-library dependencies that have been dropped here will be"
+ echo "*** automatically added whenever a program is linked with this library"
+ echo "*** or is declared to -dlopen it."
+
+ if test "$allow_undefined" = no; then
+ echo
+ echo "*** Since this library must not contain undefined symbols,"
+ echo "*** because either the platform does not support them or"
+ echo "*** it was explicitly requested with -no-undefined,"
+ echo "*** libtool will only create a static version of it."
+ if test "$build_old_libs" = no; then
+ oldlibs="$output_objdir/$libname.$libext"
+ build_libtool_libs=module
+ build_old_libs=yes
+ else
+ build_libtool_libs=no
+ fi
+ fi
+ fi
+ fi
+ # Done checking deplibs!
+ deplibs=$newdeplibs
+ fi
+ # Time to change all our "foo.ltframework" stuff back to "-framework foo"
+ case $host in
+ *-*-darwin*)
+ newdeplibs=`$ECHO " $newdeplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+ new_inherited_linker_flags=`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+ deplibs=`$ECHO " $deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+ ;;
+ esac
+
+ # move library search paths that coincide with paths to not yet
+ # installed libraries to the beginning of the library search list
+ new_libs=
+ for path in $notinst_path; do
+ case " $new_libs " in
+ *" -L$path/$objdir "*) ;;
+ *)
+ case " $deplibs " in
+ *" -L$path/$objdir "*)
+ func_append new_libs " -L$path/$objdir" ;;
+ esac
+ ;;
+ esac
+ done
+ for deplib in $deplibs; do
+ case $deplib in
+ -L*)
+ case " $new_libs " in
+ *" $deplib "*) ;;
+ *) func_append new_libs " $deplib" ;;
+ esac
+ ;;
+ *) func_append new_libs " $deplib" ;;
+ esac
+ done
+ deplibs="$new_libs"
+
+ # All the library-specific variables (install_libdir is set above).
+ library_names=
+ old_library=
+ dlname=
+
+ # Test again, we may have decided not to build it any more
+ if test "$build_libtool_libs" = yes; then
+ # Remove ${wl} instances when linking with ld.
+ # FIXME: should test the right _cmds variable.
+ case $archive_cmds in
+ *\$LD\ *) wl= ;;
+ esac
+ if test "$hardcode_into_libs" = yes; then
+ # Hardcode the library paths
+ hardcode_libdirs=
+ dep_rpath=
+ rpath="$finalize_rpath"
+ test "$opt_mode" != relink && rpath="$compile_rpath$rpath"
+ for libdir in $rpath; do
+ if test -n "$hardcode_libdir_flag_spec"; then
+ if test -n "$hardcode_libdir_separator"; then
+ func_replace_sysroot "$libdir"
+ libdir=$func_replace_sysroot_result
+ if test -z "$hardcode_libdirs"; then
+ hardcode_libdirs="$libdir"
+ else
+ # Just accumulate the unique libdirs.
+ case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
+ *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+ ;;
+ *)
+ func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
+ ;;
+ esac
+ fi
+ else
+ eval flag=\"$hardcode_libdir_flag_spec\"
+ func_append dep_rpath " $flag"
+ fi
+ elif test -n "$runpath_var"; then
+ case "$perm_rpath " in
+ *" $libdir "*) ;;
+ *) func_append perm_rpath " $libdir" ;;
+ esac
+ fi
+ done
+ # Substitute the hardcoded libdirs into the rpath.
+ if test -n "$hardcode_libdir_separator" &&
+ test -n "$hardcode_libdirs"; then
+ libdir="$hardcode_libdirs"
+ eval "dep_rpath=\"$hardcode_libdir_flag_spec\""
+ fi
+ if test -n "$runpath_var" && test -n "$perm_rpath"; then
+ # We should set the runpath_var.
+ rpath=
+ for dir in $perm_rpath; do
+ func_append rpath "$dir:"
+ done
+ eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var"
+ fi
+ test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs"
+ fi
+
+ shlibpath="$finalize_shlibpath"
+ test "$opt_mode" != relink && shlibpath="$compile_shlibpath$shlibpath"
+ if test -n "$shlibpath"; then
+ eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var"
+ fi
+
+ # Get the real and link names of the library.
+ eval shared_ext=\"$shrext_cmds\"
+ eval library_names=\"$library_names_spec\"
+ set dummy $library_names
+ shift
+ realname="$1"
+ shift
+
+ if test -n "$soname_spec"; then
+ eval soname=\"$soname_spec\"
+ else
+ soname="$realname"
+ fi
+ if test -z "$dlname"; then
+ dlname=$soname
+ fi
+
+ lib="$output_objdir/$realname"
+ linknames=
+ for link
+ do
+ func_append linknames " $link"
+ done
+
+ # Use standard objects if they are pic
+ test -z "$pic_flag" && libobjs=`$ECHO "$libobjs" | $SP2NL | $SED "$lo2o" | $NL2SP`
+ test "X$libobjs" = "X " && libobjs=
+
+ delfiles=
+ if test -n "$export_symbols" && test -n "$include_expsyms"; then
+ $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp"
+ export_symbols="$output_objdir/$libname.uexp"
+ func_append delfiles " $export_symbols"
+ fi
+
+ orig_export_symbols=
+ case $host_os in
+ cygwin* | mingw* | cegcc*)
+ if test -n "$export_symbols" && test -z "$export_symbols_regex"; then
+ # exporting using user supplied symfile
+ if test "x`$SED 1q $export_symbols`" != xEXPORTS; then
+ # and it's NOT already a .def file. Must figure out
+ # which of the given symbols are data symbols and tag
+ # them as such. So, trigger use of export_symbols_cmds.
+ # export_symbols gets reassigned inside the "prepare
+ # the list of exported symbols" if statement, so the
+ # include_expsyms logic still works.
+ orig_export_symbols="$export_symbols"
+ export_symbols=
+ always_export_symbols=yes
+ fi
+ fi
+ ;;
+ esac
+
+ # Prepare the list of exported symbols
+ if test -z "$export_symbols"; then
+ if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then
+ func_verbose "generating symbol list for \`$libname.la'"
+ export_symbols="$output_objdir/$libname.exp"
+ $opt_dry_run || $RM $export_symbols
+ cmds=$export_symbols_cmds
+ save_ifs="$IFS"; IFS='~'
+ for cmd1 in $cmds; do
+ IFS="$save_ifs"
+ # Take the normal branch if the nm_file_list_spec branch
+ # doesn't work or if tool conversion is not needed.
+ case $nm_file_list_spec~$to_tool_file_cmd in
+ *~func_convert_file_noop | *~func_convert_file_msys_to_w32 | ~*)
+ try_normal_branch=yes
+ eval cmd=\"$cmd1\"
+ func_len " $cmd"
+ len=$func_len_result
+ ;;
+ *)
+ try_normal_branch=no
+ ;;
+ esac
+ if test "$try_normal_branch" = yes \
+ && { test "$len" -lt "$max_cmd_len" \
+ || test "$max_cmd_len" -le -1; }
+ then
+ func_show_eval "$cmd" 'exit $?'
+ skipped_export=false
+ elif test -n "$nm_file_list_spec"; then
+ func_basename "$output"
+ output_la=$func_basename_result
+ save_libobjs=$libobjs
+ save_output=$output
+ output=${output_objdir}/${output_la}.nm
+ func_to_tool_file "$output"
+ libobjs=$nm_file_list_spec$func_to_tool_file_result
+ func_append delfiles " $output"
+ func_verbose "creating $NM input file list: $output"
+ for obj in $save_libobjs; do
+ func_to_tool_file "$obj"
+ $ECHO "$func_to_tool_file_result"
+ done > "$output"
+ eval cmd=\"$cmd1\"
+ func_show_eval "$cmd" 'exit $?'
+ output=$save_output
+ libobjs=$save_libobjs
+ skipped_export=false
+ else
+ # The command line is too long to execute in one step.
+ func_verbose "using reloadable object file for export list..."
+ skipped_export=:
+ # Break out early, otherwise skipped_export may be
+ # set to false by a later but shorter cmd.
+ break
+ fi
+ done
+ IFS="$save_ifs"
+ if test -n "$export_symbols_regex" && test "X$skipped_export" != "X:"; then
+ func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
+ func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
+ fi
+ fi
+ fi
+
+ if test -n "$export_symbols" && test -n "$include_expsyms"; then
+ tmp_export_symbols="$export_symbols"
+ test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
+ $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"'
+ fi
+
+ if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then
+ # The given exports_symbols file has to be filtered, so filter it.
+ func_verbose "filter symbol list for \`$libname.la' to tag DATA exports"
+ # FIXME: $output_objdir/$libname.filter potentially contains lots of
+ # 's' commands which not all seds can handle. GNU sed should be fine
+ # though. Also, the filter scales superlinearly with the number of
+ # global variables. join(1) would be nice here, but unfortunately
+ # isn't a blessed tool.
+ $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
+ func_append delfiles " $export_symbols $output_objdir/$libname.filter"
+ export_symbols=$output_objdir/$libname.def
+ $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
+ fi
+
+ tmp_deplibs=
+ for test_deplib in $deplibs; do
+ case " $convenience " in
+ *" $test_deplib "*) ;;
+ *)
+ func_append tmp_deplibs " $test_deplib"
+ ;;
+ esac
+ done
+ deplibs="$tmp_deplibs"
+
+ if test -n "$convenience"; then
+ if test -n "$whole_archive_flag_spec" &&
+ test "$compiler_needs_object" = yes &&
+ test -z "$libobjs"; then
+ # extract the archives, so we have objects to list.
+ # TODO: could optimize this to just extract one archive.
+ whole_archive_flag_spec=
+ fi
+ if test -n "$whole_archive_flag_spec"; then
+ save_libobjs=$libobjs
+ eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
+ test "X$libobjs" = "X " && libobjs=
+ else
+ gentop="$output_objdir/${outputname}x"
+ func_append generated " $gentop"
+
+ func_extract_archives $gentop $convenience
+ func_append libobjs " $func_extract_archives_result"
+ test "X$libobjs" = "X " && libobjs=
+ fi
+ fi
+
+ if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
+ eval flag=\"$thread_safe_flag_spec\"
+ func_append linker_flags " $flag"
+ fi
+
+ # Make a backup of the uninstalled library when relinking
+ if test "$opt_mode" = relink; then
+ $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $?
+ fi
+
+ # Do each of the archive commands.
+ if test "$module" = yes && test -n "$module_cmds" ; then
+ if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
+ eval test_cmds=\"$module_expsym_cmds\"
+ cmds=$module_expsym_cmds
+ else
+ eval test_cmds=\"$module_cmds\"
+ cmds=$module_cmds
+ fi
+ else
+ if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
+ eval test_cmds=\"$archive_expsym_cmds\"
+ cmds=$archive_expsym_cmds
+ else
+ eval test_cmds=\"$archive_cmds\"
+ cmds=$archive_cmds
+ fi
+ fi
+
+ if test "X$skipped_export" != "X:" &&
+ func_len " $test_cmds" &&
+ len=$func_len_result &&
+ test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+ :
+ else
+ # The command line is too long to link in one step, link piecewise
+ # or, if using GNU ld and skipped_export is not :, use a linker
+ # script.
+
+ # Save the value of $output and $libobjs because we want to
+ # use them later. If we have whole_archive_flag_spec, we
+ # want to use save_libobjs as it was before
+ # whole_archive_flag_spec was expanded, because we can't
+ # assume the linker understands whole_archive_flag_spec.
+ # This may have to be revisited, in case too many
+ # convenience libraries get linked in and end up exceeding
+ # the spec.
+ if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then
+ save_libobjs=$libobjs
+ fi
+ save_output=$output
+ func_basename "$output"
+ output_la=$func_basename_result
+
+ # Clear the reloadable object creation command queue and
+ # initialize k to one.
+ test_cmds=
+ concat_cmds=
+ objlist=
+ last_robj=
+ k=1
+
+ if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then
+ output=${output_objdir}/${output_la}.lnkscript
+ func_verbose "creating GNU ld script: $output"
+ echo 'INPUT (' > $output
+ for obj in $save_libobjs
+ do
+ func_to_tool_file "$obj"
+ $ECHO "$func_to_tool_file_result" >> $output
+ done
+ echo ')' >> $output
+ func_append delfiles " $output"
+ func_to_tool_file "$output"
+ output=$func_to_tool_file_result
+ elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then
+ output=${output_objdir}/${output_la}.lnk
+ func_verbose "creating linker input file list: $output"
+ : > $output
+ set x $save_libobjs
+ shift
+ firstobj=
+ if test "$compiler_needs_object" = yes; then
+ firstobj="$1 "
+ shift
+ fi
+ for obj
+ do
+ func_to_tool_file "$obj"
+ $ECHO "$func_to_tool_file_result" >> $output
+ done
+ func_append delfiles " $output"
+ func_to_tool_file "$output"
+ output=$firstobj\"$file_list_spec$func_to_tool_file_result\"
+ else
+ if test -n "$save_libobjs"; then
+ func_verbose "creating reloadable object files..."
+ output=$output_objdir/$output_la-${k}.$objext
+ eval test_cmds=\"$reload_cmds\"
+ func_len " $test_cmds"
+ len0=$func_len_result
+ len=$len0
+
+ # Loop over the list of objects to be linked.
+ for obj in $save_libobjs
+ do
+ func_len " $obj"
+ func_arith $len + $func_len_result
+ len=$func_arith_result
+ if test "X$objlist" = X ||
+ test "$len" -lt "$max_cmd_len"; then
+ func_append objlist " $obj"
+ else
+ # The command $test_cmds is almost too long, add a
+ # command to the queue.
+ if test "$k" -eq 1 ; then
+ # The first file doesn't have a previous command to add.
+ reload_objs=$objlist
+ eval concat_cmds=\"$reload_cmds\"
+ else
+ # All subsequent reloadable object files will link in
+ # the last one created.
+ reload_objs="$objlist $last_robj"
+ eval concat_cmds=\"\$concat_cmds~$reload_cmds~\$RM $last_robj\"
+ fi
+ last_robj=$output_objdir/$output_la-${k}.$objext
+ func_arith $k + 1
+ k=$func_arith_result
+ output=$output_objdir/$output_la-${k}.$objext
+ objlist=" $obj"
+ func_len " $last_robj"
+ func_arith $len0 + $func_len_result
+ len=$func_arith_result
+ fi
+ done
+ # Handle the remaining objects by creating one last
+ # reloadable object file. All subsequent reloadable object
+ # files will link in the last one created.
+ test -z "$concat_cmds" || concat_cmds=$concat_cmds~
+ reload_objs="$objlist $last_robj"
+ eval concat_cmds=\"\${concat_cmds}$reload_cmds\"
+ if test -n "$last_robj"; then
+ eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\"
+ fi
+ func_append delfiles " $output"
+
+ else
+ output=
+ fi
+
+ if ${skipped_export-false}; then
+ func_verbose "generating symbol list for \`$libname.la'"
+ export_symbols="$output_objdir/$libname.exp"
+ $opt_dry_run || $RM $export_symbols
+ libobjs=$output
+ # Append the command to create the export file.
+ test -z "$concat_cmds" || concat_cmds=$concat_cmds~
+ eval concat_cmds=\"\$concat_cmds$export_symbols_cmds\"
+ if test -n "$last_robj"; then
+ eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\"
+ fi
+ fi
+
+ test -n "$save_libobjs" &&
+ func_verbose "creating a temporary reloadable object file: $output"
+
+ # Loop through the commands generated above and execute them.
+ save_ifs="$IFS"; IFS='~'
+ for cmd in $concat_cmds; do
+ IFS="$save_ifs"
+ $opt_silent || {
+ func_quote_for_expand "$cmd"
+ eval "func_echo $func_quote_for_expand_result"
+ }
+ $opt_dry_run || eval "$cmd" || {
+ lt_exit=$?
+
+ # Restore the uninstalled library and exit
+ if test "$opt_mode" = relink; then
+ ( cd "$output_objdir" && \
+ $RM "${realname}T" && \
+ $MV "${realname}U" "$realname" )
+ fi
+
+ exit $lt_exit
+ }
+ done
+ IFS="$save_ifs"
+
+ if test -n "$export_symbols_regex" && ${skipped_export-false}; then
+ func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
+ func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
+ fi
+ fi
+
+ if ${skipped_export-false}; then
+ if test -n "$export_symbols" && test -n "$include_expsyms"; then
+ tmp_export_symbols="$export_symbols"
+ test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
+ $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"'
+ fi
+
+ if test -n "$orig_export_symbols"; then
+ # The given exports_symbols file has to be filtered, so filter it.
+ func_verbose "filter symbol list for \`$libname.la' to tag DATA exports"
+ # FIXME: $output_objdir/$libname.filter potentially contains lots of
+ # 's' commands which not all seds can handle. GNU sed should be fine
+ # though. Also, the filter scales superlinearly with the number of
+ # global variables. join(1) would be nice here, but unfortunately
+ # isn't a blessed tool.
+ $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
+ func_append delfiles " $export_symbols $output_objdir/$libname.filter"
+ export_symbols=$output_objdir/$libname.def
+ $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
+ fi
+ fi
+
+ libobjs=$output
+ # Restore the value of output.
+ output=$save_output
+
+ if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then
+ eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
+ test "X$libobjs" = "X " && libobjs=
+ fi
+ # Expand the library linking commands again to reset the
+ # value of $libobjs for piecewise linking.
+
+ # Do each of the archive commands.
+ if test "$module" = yes && test -n "$module_cmds" ; then
+ if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
+ cmds=$module_expsym_cmds
+ else
+ cmds=$module_cmds
+ fi
+ else
+ if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
+ cmds=$archive_expsym_cmds
+ else
+ cmds=$archive_cmds
+ fi
+ fi
+ fi
+
+ if test -n "$delfiles"; then
+ # Append the command to remove temporary files to $cmds.
+ eval cmds=\"\$cmds~\$RM $delfiles\"
+ fi
+
+ # Add any objects from preloaded convenience libraries
+ if test -n "$dlprefiles"; then
+ gentop="$output_objdir/${outputname}x"
+ func_append generated " $gentop"
+
+ func_extract_archives $gentop $dlprefiles
+ func_append libobjs " $func_extract_archives_result"
+ test "X$libobjs" = "X " && libobjs=
+ fi
+
+ save_ifs="$IFS"; IFS='~'
+ for cmd in $cmds; do
+ IFS="$save_ifs"
+ eval cmd=\"$cmd\"
+ $opt_silent || {
+ func_quote_for_expand "$cmd"
+ eval "func_echo $func_quote_for_expand_result"
+ }
+ $opt_dry_run || eval "$cmd" || {
+ lt_exit=$?
+
+ # Restore the uninstalled library and exit
+ if test "$opt_mode" = relink; then
+ ( cd "$output_objdir" && \
+ $RM "${realname}T" && \
+ $MV "${realname}U" "$realname" )
+ fi
+
+ exit $lt_exit
+ }
+ done
+ IFS="$save_ifs"
+
+ # Restore the uninstalled library and exit
+ if test "$opt_mode" = relink; then
+ $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $?
+
+ if test -n "$convenience"; then
+ if test -z "$whole_archive_flag_spec"; then
+ func_show_eval '${RM}r "$gentop"'
+ fi
+ fi
+
+ exit $EXIT_SUCCESS
+ fi
+
+ # Create links to the real library.
+ for linkname in $linknames; do
+ if test "$realname" != "$linkname"; then
+ func_show_eval '(cd "$output_objdir" && $RM "$linkname" && $LN_S "$realname" "$linkname")' 'exit $?'
+ fi
+ done
+
+ # If -module or -export-dynamic was specified, set the dlname.
+ if test "$module" = yes || test "$export_dynamic" = yes; then
+ # On all known operating systems, these are identical.
+ dlname="$soname"
+ fi
+ fi
+ ;;
+
+ obj)
+ if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+ func_warning "\`-dlopen' is ignored for objects"
+ fi
+
+ case " $deplibs" in
+ *\ -l* | *\ -L*)
+ func_warning "\`-l' and \`-L' are ignored for objects" ;;
+ esac
+
+ test -n "$rpath" && \
+ func_warning "\`-rpath' is ignored for objects"
+
+ test -n "$xrpath" && \
+ func_warning "\`-R' is ignored for objects"
+
+ test -n "$vinfo" && \
+ func_warning "\`-version-info' is ignored for objects"
+
+ test -n "$release" && \
+ func_warning "\`-release' is ignored for objects"
+
+ case $output in
+ *.lo)
+ test -n "$objs$old_deplibs" && \
+ func_fatal_error "cannot build library object \`$output' from non-libtool objects"
+
+ libobj=$output
+ func_lo2o "$libobj"
+ obj=$func_lo2o_result
+ ;;
+ *)
+ libobj=
+ obj="$output"
+ ;;
+ esac
+
+ # Delete the old objects.
+ $opt_dry_run || $RM $obj $libobj
+
+ # Objects from convenience libraries. This assumes
+ # single-version convenience libraries. Whenever we create
+ # different ones for PIC/non-PIC, this we'll have to duplicate
+ # the extraction.
+ reload_conv_objs=
+ gentop=
+ # reload_cmds runs $LD directly, so let us get rid of
+ # -Wl from whole_archive_flag_spec and hope we can get by with
+ # turning comma into space..
+ wl=
+
+ if test -n "$convenience"; then
+ if test -n "$whole_archive_flag_spec"; then
+ eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\"
+ reload_conv_objs=$reload_objs\ `$ECHO "$tmp_whole_archive_flags" | $SED 's|,| |g'`
+ else
+ gentop="$output_objdir/${obj}x"
+ func_append generated " $gentop"
+
+ func_extract_archives $gentop $convenience
+ reload_conv_objs="$reload_objs $func_extract_archives_result"
+ fi
+ fi
+
+ # If we're not building shared, we need to use non_pic_objs
+ test "$build_libtool_libs" != yes && libobjs="$non_pic_objects"
+
+ # Create the old-style object.
+ reload_objs="$objs$old_deplibs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; /\.lib$/d; $lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
+
+ output="$obj"
+ func_execute_cmds "$reload_cmds" 'exit $?'
+
+ # Exit if we aren't doing a library object file.
+ if test -z "$libobj"; then
+ if test -n "$gentop"; then
+ func_show_eval '${RM}r "$gentop"'
+ fi
+
+ exit $EXIT_SUCCESS
+ fi
+
+ if test "$build_libtool_libs" != yes; then
+ if test -n "$gentop"; then
+ func_show_eval '${RM}r "$gentop"'
+ fi
+
+ # Create an invalid libtool object if no PIC, so that we don't
+ # accidentally link it into a program.
+ # $show "echo timestamp > $libobj"
+ # $opt_dry_run || eval "echo timestamp > $libobj" || exit $?
+ exit $EXIT_SUCCESS
+ fi
+
+ if test -n "$pic_flag" || test "$pic_mode" != default; then
+ # Only do commands if we really have different PIC objects.
+ reload_objs="$libobjs $reload_conv_objs"
+ output="$libobj"
+ func_execute_cmds "$reload_cmds" 'exit $?'
+ fi
+
+ if test -n "$gentop"; then
+ func_show_eval '${RM}r "$gentop"'
+ fi
+
+ exit $EXIT_SUCCESS
+ ;;
+
+ prog)
+ case $host in
+ *cygwin*) func_stripname '' '.exe' "$output"
+ output=$func_stripname_result.exe;;
+ esac
+ test -n "$vinfo" && \
+ func_warning "\`-version-info' is ignored for programs"
+
+ test -n "$release" && \
+ func_warning "\`-release' is ignored for programs"
+
+ test "$preload" = yes \
+ && test "$dlopen_support" = unknown \
+ && test "$dlopen_self" = unknown \
+ && test "$dlopen_self_static" = unknown && \
+ func_warning "\`LT_INIT([dlopen])' not used. Assuming no dlopen support."
+
+ case $host in
+ *-*-rhapsody* | *-*-darwin1.[012])
+ # On Rhapsody replace the C library is the System framework
+ compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's/ -lc / System.ltframework /'`
+ finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's/ -lc / System.ltframework /'`
+ ;;
+ esac
+
+ case $host in
+ *-*-darwin*)
+ # Don't allow lazy linking, it breaks C++ global constructors
+ # But is supposedly fixed on 10.4 or later (yay!).
+ if test "$tagname" = CXX ; then
+ case ${MACOSX_DEPLOYMENT_TARGET-10.0} in
+ 10.[0123])
+ func_append compile_command " ${wl}-bind_at_load"
+ func_append finalize_command " ${wl}-bind_at_load"
+ ;;
+ esac
+ fi
+ # Time to change all our "foo.ltframework" stuff back to "-framework foo"
+ compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+ finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+ ;;
+ esac
+
+
+ # move library search paths that coincide with paths to not yet
+ # installed libraries to the beginning of the library search list
+ new_libs=
+ for path in $notinst_path; do
+ case " $new_libs " in
+ *" -L$path/$objdir "*) ;;
+ *)
+ case " $compile_deplibs " in
+ *" -L$path/$objdir "*)
+ func_append new_libs " -L$path/$objdir" ;;
+ esac
+ ;;
+ esac
+ done
+ for deplib in $compile_deplibs; do
+ case $deplib in
+ -L*)
+ case " $new_libs " in
+ *" $deplib "*) ;;
+ *) func_append new_libs " $deplib" ;;
+ esac
+ ;;
+ *) func_append new_libs " $deplib" ;;
+ esac
+ done
+ compile_deplibs="$new_libs"
+
+
+ func_append compile_command " $compile_deplibs"
+ func_append finalize_command " $finalize_deplibs"
+
+ if test -n "$rpath$xrpath"; then
+ # If the user specified any rpath flags, then add them.
+ for libdir in $rpath $xrpath; do
+ # This is the magic to use -rpath.
+ case "$finalize_rpath " in
+ *" $libdir "*) ;;
+ *) func_append finalize_rpath " $libdir" ;;
+ esac
+ done
+ fi
+
+ # Now hardcode the library paths
+ rpath=
+ hardcode_libdirs=
+ for libdir in $compile_rpath $finalize_rpath; do
+ if test -n "$hardcode_libdir_flag_spec"; then
+ if test -n "$hardcode_libdir_separator"; then
+ if test -z "$hardcode_libdirs"; then
+ hardcode_libdirs="$libdir"
+ else
+ # Just accumulate the unique libdirs.
+ case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
+ *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+ ;;
+ *)
+ func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
+ ;;
+ esac
+ fi
+ else
+ eval flag=\"$hardcode_libdir_flag_spec\"
+ func_append rpath " $flag"
+ fi
+ elif test -n "$runpath_var"; then
+ case "$perm_rpath " in
+ *" $libdir "*) ;;
+ *) func_append perm_rpath " $libdir" ;;
+ esac
+ fi
+ case $host in
+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
+ testbindir=`${ECHO} "$libdir" | ${SED} -e 's*/lib$*/bin*'`
+ case :$dllsearchpath: in
+ *":$libdir:"*) ;;
+ ::) dllsearchpath=$libdir;;
+ *) func_append dllsearchpath ":$libdir";;
+ esac
+ case :$dllsearchpath: in
+ *":$testbindir:"*) ;;
+ ::) dllsearchpath=$testbindir;;
+ *) func_append dllsearchpath ":$testbindir";;
+ esac
+ ;;
+ esac
+ done
+ # Substitute the hardcoded libdirs into the rpath.
+ if test -n "$hardcode_libdir_separator" &&
+ test -n "$hardcode_libdirs"; then
+ libdir="$hardcode_libdirs"
+ eval rpath=\" $hardcode_libdir_flag_spec\"
+ fi
+ compile_rpath="$rpath"
+
+ rpath=
+ hardcode_libdirs=
+ for libdir in $finalize_rpath; do
+ if test -n "$hardcode_libdir_flag_spec"; then
+ if test -n "$hardcode_libdir_separator"; then
+ if test -z "$hardcode_libdirs"; then
+ hardcode_libdirs="$libdir"
+ else
+ # Just accumulate the unique libdirs.
+ case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
+ *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+ ;;
+ *)
+ func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
+ ;;
+ esac
+ fi
+ else
+ eval flag=\"$hardcode_libdir_flag_spec\"
+ func_append rpath " $flag"
+ fi
+ elif test -n "$runpath_var"; then
+ case "$finalize_perm_rpath " in
+ *" $libdir "*) ;;
+ *) func_append finalize_perm_rpath " $libdir" ;;
+ esac
+ fi
+ done
+ # Substitute the hardcoded libdirs into the rpath.
+ if test -n "$hardcode_libdir_separator" &&
+ test -n "$hardcode_libdirs"; then
+ libdir="$hardcode_libdirs"
+ eval rpath=\" $hardcode_libdir_flag_spec\"
+ fi
+ finalize_rpath="$rpath"
+
+ if test -n "$libobjs" && test "$build_old_libs" = yes; then
+ # Transform all the library objects into standard objects.
+ compile_command=`$ECHO "$compile_command" | $SP2NL | $SED "$lo2o" | $NL2SP`
+ finalize_command=`$ECHO "$finalize_command" | $SP2NL | $SED "$lo2o" | $NL2SP`
+ fi
+
+ func_generate_dlsyms "$outputname" "@PROGRAM@" "no"
+
+ # template prelinking step
+ if test -n "$prelink_cmds"; then
+ func_execute_cmds "$prelink_cmds" 'exit $?'
+ fi
+
+ wrappers_required=yes
+ case $host in
+ *cegcc* | *mingw32ce*)
+ # Disable wrappers for cegcc and mingw32ce hosts, we are cross compiling anyway.
+ wrappers_required=no
+ ;;
+ *cygwin* | *mingw* )
+ if test "$build_libtool_libs" != yes; then
+ wrappers_required=no
+ fi
+ ;;
+ *)
+ if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
+ wrappers_required=no
+ fi
+ ;;
+ esac
+ if test "$wrappers_required" = no; then
+ # Replace the output file specification.
+ compile_command=`$ECHO "$compile_command" | $SED 's%@OUTPUT@%'"$output"'%g'`
+ link_command="$compile_command$compile_rpath"
+
+ # We have no uninstalled library dependencies, so finalize right now.
+ exit_status=0
+ func_show_eval "$link_command" 'exit_status=$?'
+
+ if test -n "$postlink_cmds"; then
+ func_to_tool_file "$output"
+ postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
+ func_execute_cmds "$postlink_cmds" 'exit $?'
+ fi
+
+ # Delete the generated files.
+ if test -f "$output_objdir/${outputname}S.${objext}"; then
+ func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"'
+ fi
+
+ exit $exit_status
+ fi
+
+ if test -n "$compile_shlibpath$finalize_shlibpath"; then
+ compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command"
+ fi
+ if test -n "$finalize_shlibpath"; then
+ finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command"
+ fi
+
+ compile_var=
+ finalize_var=
+ if test -n "$runpath_var"; then
+ if test -n "$perm_rpath"; then
+ # We should set the runpath_var.
+ rpath=
+ for dir in $perm_rpath; do
+ func_append rpath "$dir:"
+ done
+ compile_var="$runpath_var=\"$rpath\$$runpath_var\" "
+ fi
+ if test -n "$finalize_perm_rpath"; then
+ # We should set the runpath_var.
+ rpath=
+ for dir in $finalize_perm_rpath; do
+ func_append rpath "$dir:"
+ done
+ finalize_var="$runpath_var=\"$rpath\$$runpath_var\" "
+ fi
+ fi
+
+ if test "$no_install" = yes; then
+ # We don't need to create a wrapper script.
+ link_command="$compile_var$compile_command$compile_rpath"
+ # Replace the output file specification.
+ link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output"'%g'`
+ # Delete the old output file.
+ $opt_dry_run || $RM $output
+ # Link the executable and exit
+ func_show_eval "$link_command" 'exit $?'
+
+ if test -n "$postlink_cmds"; then
+ func_to_tool_file "$output"
+ postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
+ func_execute_cmds "$postlink_cmds" 'exit $?'
+ fi
+
+ exit $EXIT_SUCCESS
+ fi
+
+ if test "$hardcode_action" = relink; then
+ # Fast installation is not supported
+ link_command="$compile_var$compile_command$compile_rpath"
+ relink_command="$finalize_var$finalize_command$finalize_rpath"
+
+ func_warning "this platform does not like uninstalled shared libraries"
+ func_warning "\`$output' will be relinked during installation"
+ else
+ if test "$fast_install" != no; then
+ link_command="$finalize_var$compile_command$finalize_rpath"
+ if test "$fast_install" = yes; then
+ relink_command=`$ECHO "$compile_var$compile_command$compile_rpath" | $SED 's%@OUTPUT@%\$progdir/\$file%g'`
+ else
+ # fast_install is set to needless
+ relink_command=
+ fi
+ else
+ link_command="$compile_var$compile_command$compile_rpath"
+ relink_command="$finalize_var$finalize_command$finalize_rpath"
+ fi
+ fi
+
+ # Replace the output file specification.
+ link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
+
+ # Delete the old output files.
+ $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname
+
+ func_show_eval "$link_command" 'exit $?'
+
+ if test -n "$postlink_cmds"; then
+ func_to_tool_file "$output_objdir/$outputname"
+ postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
+ func_execute_cmds "$postlink_cmds" 'exit $?'
+ fi
+
+ # Now create the wrapper script.
+ func_verbose "creating $output"
+
+ # Quote the relink command for shipping.
+ if test -n "$relink_command"; then
+ # Preserve any variables that may affect compiler behavior
+ for var in $variables_saved_for_relink; do
+ if eval test -z \"\${$var+set}\"; then
+ relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"
+ elif eval var_value=\$$var; test -z "$var_value"; then
+ relink_command="$var=; export $var; $relink_command"
+ else
+ func_quote_for_eval "$var_value"
+ relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command"
+ fi
+ done
+ relink_command="(cd `pwd`; $relink_command)"
+ relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"`
+ fi
+
+ # Only actually do things if not in dry run mode.
+ $opt_dry_run || {
+ # win32 will think the script is a binary if it has
+ # a .exe suffix, so we strip it off here.
+ case $output in
+ *.exe) func_stripname '' '.exe' "$output"
+ output=$func_stripname_result ;;
+ esac
+ # test for cygwin because mv fails w/o .exe extensions
+ case $host in
+ *cygwin*)
+ exeext=.exe
+ func_stripname '' '.exe' "$outputname"
+ outputname=$func_stripname_result ;;
+ *) exeext= ;;
+ esac
+ case $host in
+ *cygwin* | *mingw* )
+ func_dirname_and_basename "$output" "" "."
+ output_name=$func_basename_result
+ output_path=$func_dirname_result
+ cwrappersource="$output_path/$objdir/lt-$output_name.c"
+ cwrapper="$output_path/$output_name.exe"
+ $RM $cwrappersource $cwrapper
+ trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
+
+ func_emit_cwrapperexe_src > $cwrappersource
+
+ # The wrapper executable is built using the $host compiler,
+ # because it contains $host paths and files. If cross-
+ # compiling, it, like the target executable, must be
+ # executed on the $host or under an emulation environment.
+ $opt_dry_run || {
+ $LTCC $LTCFLAGS -o $cwrapper $cwrappersource
+ $STRIP $cwrapper
+ }
+
+ # Now, create the wrapper script for func_source use:
+ func_ltwrapper_scriptname $cwrapper
+ $RM $func_ltwrapper_scriptname_result
+ trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1 2 15
+ $opt_dry_run || {
+ # note: this script will not be executed, so do not chmod.
+ if test "x$build" = "x$host" ; then
+ $cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result
+ else
+ func_emit_wrapper no > $func_ltwrapper_scriptname_result
+ fi
+ }
+ ;;
+ * )
+ $RM $output
+ trap "$RM $output; exit $EXIT_FAILURE" 1 2 15
+
+ func_emit_wrapper no > $output
+ chmod +x $output
+ ;;
+ esac
+ }
+ exit $EXIT_SUCCESS
+ ;;
+ esac
+
+ # See if we need to build an old-fashioned archive.
+ for oldlib in $oldlibs; do
+
+ if test "$build_libtool_libs" = convenience; then
+ oldobjs="$libobjs_save $symfileobj"
+ addlibs="$convenience"
+ build_libtool_libs=no
+ else
+ if test "$build_libtool_libs" = module; then
+ oldobjs="$libobjs_save"
+ build_libtool_libs=no
+ else
+ oldobjs="$old_deplibs $non_pic_objects"
+ if test "$preload" = yes && test -f "$symfileobj"; then
+ func_append oldobjs " $symfileobj"
+ fi
+ fi
+ addlibs="$old_convenience"
+ fi
+
+ if test -n "$addlibs"; then
+ gentop="$output_objdir/${outputname}x"
+ func_append generated " $gentop"
+
+ func_extract_archives $gentop $addlibs
+ func_append oldobjs " $func_extract_archives_result"
+ fi
+
+ # Do each command in the archive commands.
+ if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
+ cmds=$old_archive_from_new_cmds
+ else
+
+ # Add any objects from preloaded convenience libraries
+ if test -n "$dlprefiles"; then
+ gentop="$output_objdir/${outputname}x"
+ func_append generated " $gentop"
+
+ func_extract_archives $gentop $dlprefiles
+ func_append oldobjs " $func_extract_archives_result"
+ fi
+
+ # POSIX demands no paths to be encoded in archives. We have
+ # to avoid creating archives with duplicate basenames if we
+ # might have to extract them afterwards, e.g., when creating a
+ # static archive out of a convenience library, or when linking
+ # the entirety of a libtool archive into another (currently
+ # not supported by libtool).
+ if (for obj in $oldobjs
+ do
+ func_basename "$obj"
+ $ECHO "$func_basename_result"
+ done | sort | sort -uc >/dev/null 2>&1); then
+ :
+ else
+ echo "copying selected object files to avoid basename conflicts..."
+ gentop="$output_objdir/${outputname}x"
+ func_append generated " $gentop"
+ func_mkdir_p "$gentop"
+ save_oldobjs=$oldobjs
+ oldobjs=
+ counter=1
+ for obj in $save_oldobjs
+ do
+ func_basename "$obj"
+ objbase="$func_basename_result"
+ case " $oldobjs " in
+ " ") oldobjs=$obj ;;
+ *[\ /]"$objbase "*)
+ while :; do
+ # Make sure we don't pick an alternate name that also
+ # overlaps.
+ newobj=lt$counter-$objbase
+ func_arith $counter + 1
+ counter=$func_arith_result
+ case " $oldobjs " in
+ *[\ /]"$newobj "*) ;;
+ *) if test ! -f "$gentop/$newobj"; then break; fi ;;
+ esac
+ done
+ func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj"
+ func_append oldobjs " $gentop/$newobj"
+ ;;
+ *) func_append oldobjs " $obj" ;;
+ esac
+ done
+ fi
+ func_to_tool_file "$oldlib" func_convert_file_msys_to_w32
+ tool_oldlib=$func_to_tool_file_result
+ eval cmds=\"$old_archive_cmds\"
+
+ func_len " $cmds"
+ len=$func_len_result
+ if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+ cmds=$old_archive_cmds
+ elif test -n "$archiver_list_spec"; then
+ func_verbose "using command file archive linking..."
+ for obj in $oldobjs
+ do
+ func_to_tool_file "$obj"
+ $ECHO "$func_to_tool_file_result"
+ done > $output_objdir/$libname.libcmd
+ func_to_tool_file "$output_objdir/$libname.libcmd"
+ oldobjs=" $archiver_list_spec$func_to_tool_file_result"
+ cmds=$old_archive_cmds
+ else
+ # the command line is too long to link in one step, link in parts
+ func_verbose "using piecewise archive linking..."
+ save_RANLIB=$RANLIB
+ RANLIB=:
+ objlist=
+ concat_cmds=
+ save_oldobjs=$oldobjs
+ oldobjs=
+ # Is there a better way of finding the last object in the list?
+ for obj in $save_oldobjs
+ do
+ last_oldobj=$obj
+ done
+ eval test_cmds=\"$old_archive_cmds\"
+ func_len " $test_cmds"
+ len0=$func_len_result
+ len=$len0
+ for obj in $save_oldobjs
+ do
+ func_len " $obj"
+ func_arith $len + $func_len_result
+ len=$func_arith_result
+ func_append objlist " $obj"
+ if test "$len" -lt "$max_cmd_len"; then
+ :
+ else
+ # the above command should be used before it gets too long
+ oldobjs=$objlist
+ if test "$obj" = "$last_oldobj" ; then
+ RANLIB=$save_RANLIB
+ fi
+ test -z "$concat_cmds" || concat_cmds=$concat_cmds~
+ eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\"
+ objlist=
+ len=$len0
+ fi
+ done
+ RANLIB=$save_RANLIB
+ oldobjs=$objlist
+ if test "X$oldobjs" = "X" ; then
+ eval cmds=\"\$concat_cmds\"
+ else
+ eval cmds=\"\$concat_cmds~\$old_archive_cmds\"
+ fi
+ fi
+ fi
+ func_execute_cmds "$cmds" 'exit $?'
+ done
+
+ test -n "$generated" && \
+ func_show_eval "${RM}r$generated"
+
+ # Now create the libtool archive.
+ case $output in
+ *.la)
+ old_library=
+ test "$build_old_libs" = yes && old_library="$libname.$libext"
+ func_verbose "creating $output"
+
+ # Preserve any variables that may affect compiler behavior
+ for var in $variables_saved_for_relink; do
+ if eval test -z \"\${$var+set}\"; then
+ relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"
+ elif eval var_value=\$$var; test -z "$var_value"; then
+ relink_command="$var=; export $var; $relink_command"
+ else
+ func_quote_for_eval "$var_value"
+ relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command"
+ fi
+ done
+ # Quote the link command for shipping.
+ relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
+ relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"`
+ if test "$hardcode_automatic" = yes ; then
+ relink_command=
+ fi
+
+ # Only create the output if not a dry run.
+ $opt_dry_run || {
+ for installed in no yes; do
+ if test "$installed" = yes; then
+ if test -z "$install_libdir"; then
+ break
+ fi
+ output="$output_objdir/$outputname"i
+ # Replace all uninstalled libtool libraries with the installed ones
+ newdependency_libs=
+ for deplib in $dependency_libs; do
+ case $deplib in
+ *.la)
+ func_basename "$deplib"
+ name="$func_basename_result"
+ func_resolve_sysroot "$deplib"
+ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $func_resolve_sysroot_result`
+ test -z "$libdir" && \
+ func_fatal_error "\`$deplib' is not a valid libtool archive"
+ func_append newdependency_libs " ${lt_sysroot:+=}$libdir/$name"
+ ;;
+ -L*)
+ func_stripname -L '' "$deplib"
+ func_replace_sysroot "$func_stripname_result"
+ func_append newdependency_libs " -L$func_replace_sysroot_result"
+ ;;
+ -R*)
+ func_stripname -R '' "$deplib"
+ func_replace_sysroot "$func_stripname_result"
+ func_append newdependency_libs " -R$func_replace_sysroot_result"
+ ;;
+ *) func_append newdependency_libs " $deplib" ;;
+ esac
+ done
+ dependency_libs="$newdependency_libs"
+ newdlfiles=
+
+ for lib in $dlfiles; do
+ case $lib in
+ *.la)
+ func_basename "$lib"
+ name="$func_basename_result"
+ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+ test -z "$libdir" && \
+ func_fatal_error "\`$lib' is not a valid libtool archive"
+ func_append newdlfiles " ${lt_sysroot:+=}$libdir/$name"
+ ;;
+ *) func_append newdlfiles " $lib" ;;
+ esac
+ done
+ dlfiles="$newdlfiles"
+ newdlprefiles=
+ for lib in $dlprefiles; do
+ case $lib in
+ *.la)
+ # Only pass preopened files to the pseudo-archive (for
+ # eventual linking with the app. that links it) if we
+ # didn't already link the preopened objects directly into
+ # the library:
+ func_basename "$lib"
+ name="$func_basename_result"
+ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+ test -z "$libdir" && \
+ func_fatal_error "\`$lib' is not a valid libtool archive"
+ func_append newdlprefiles " ${lt_sysroot:+=}$libdir/$name"
+ ;;
+ esac
+ done
+ dlprefiles="$newdlprefiles"
+ else
+ newdlfiles=
+ for lib in $dlfiles; do
+ case $lib in
+ [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
+ *) abs=`pwd`"/$lib" ;;
+ esac
+ func_append newdlfiles " $abs"
+ done
+ dlfiles="$newdlfiles"
+ newdlprefiles=
+ for lib in $dlprefiles; do
+ case $lib in
+ [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
+ *) abs=`pwd`"/$lib" ;;
+ esac
+ func_append newdlprefiles " $abs"
+ done
+ dlprefiles="$newdlprefiles"
+ fi
+ $RM $output
+ # place dlname in correct position for cygwin
+ # In fact, it would be nice if we could use this code for all target
+ # systems that can't hard-code library paths into their executables
+ # and that have no shared library path variable independent of PATH,
+ # but it turns out we can't easily determine that from inspecting
+ # libtool variables, so we have to hard-code the OSs to which it
+ # applies here; at the moment, that means platforms that use the PE
+ # object format with DLL files. See the long comment at the top of
+ # tests/bindir.at for full details.
+ tdlname=$dlname
+ case $host,$output,$installed,$module,$dlname in
+ *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll)
+ # If a -bindir argument was supplied, place the dll there.
+ if test "x$bindir" != x ;
+ then
+ func_relative_path "$install_libdir" "$bindir"
+ tdlname=$func_relative_path_result$dlname
+ else
+ # Otherwise fall back on heuristic.
+ tdlname=../bin/$dlname
+ fi
+ ;;
+ esac
+ $ECHO > $output "\
+# $outputname - a libtool library file
+# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+#
+# Please DO NOT delete this file!
+# It is necessary for linking the library.
+
+# The name that we can dlopen(3).
+dlname='$tdlname'
+
+# Names of this library.
+library_names='$library_names'
+
+# The name of the static archive.
+old_library='$old_library'
+
+# Linker flags that can not go in dependency_libs.
+inherited_linker_flags='$new_inherited_linker_flags'
+
+# Libraries that this one depends upon.
+dependency_libs='$dependency_libs'
+
+# Names of additional weak libraries provided by this library
+weak_library_names='$weak_libs'
+
+# Version information for $libname.
+current=$current
+age=$age
+revision=$revision
+
+# Is this an already installed library?
+installed=$installed
+
+# Should we warn about portability when linking against -modules?
+shouldnotlink=$module
+
+# Files to dlopen/dlpreopen
+dlopen='$dlfiles'
+dlpreopen='$dlprefiles'
+
+# Directory that this library needs to be installed in:
+libdir='$install_libdir'"
+ if test "$installed" = no && test "$need_relink" = yes; then
+ $ECHO >> $output "\
+relink_command=\"$relink_command\""
+ fi
+ done
+ }
+
+ # Do a symbolic link so that the libtool archive can be found in
+ # LD_LIBRARY_PATH before the program is installed.
+ func_show_eval '( cd "$output_objdir" && $RM "$outputname" && $LN_S "../$outputname" "$outputname" )' 'exit $?'
+ ;;
+ esac
+ exit $EXIT_SUCCESS
+}
+
+{ test "$opt_mode" = link || test "$opt_mode" = relink; } &&
+ func_mode_link ${1+"$@"}
+
+
+# func_mode_uninstall arg...
+func_mode_uninstall ()
+{
+ $opt_debug
+ RM="$nonopt"
+ files=
+ rmforce=
+ exit_status=0
+
+ # This variable tells wrapper scripts just to set variables rather
+ # than running their programs.
+ libtool_install_magic="$magic"
+
+ for arg
+ do
+ case $arg in
+ -f) func_append RM " $arg"; rmforce=yes ;;
+ -*) func_append RM " $arg" ;;
+ *) func_append files " $arg" ;;
+ esac
+ done
+
+ test -z "$RM" && \
+ func_fatal_help "you must specify an RM program"
+
+ rmdirs=
+
+ for file in $files; do
+ func_dirname "$file" "" "."
+ dir="$func_dirname_result"
+ if test "X$dir" = X.; then
+ odir="$objdir"
+ else
+ odir="$dir/$objdir"
+ fi
+ func_basename "$file"
+ name="$func_basename_result"
+ test "$opt_mode" = uninstall && odir="$dir"
+
+ # Remember odir for removal later, being careful to avoid duplicates
+ if test "$opt_mode" = clean; then
+ case " $rmdirs " in
+ *" $odir "*) ;;
+ *) func_append rmdirs " $odir" ;;
+ esac
+ fi
+
+ # Don't error if the file doesn't exist and rm -f was used.
+ if { test -L "$file"; } >/dev/null 2>&1 ||
+ { test -h "$file"; } >/dev/null 2>&1 ||
+ test -f "$file"; then
+ :
+ elif test -d "$file"; then
+ exit_status=1
+ continue
+ elif test "$rmforce" = yes; then
+ continue
+ fi
+
+ rmfiles="$file"
+
+ case $name in
+ *.la)
+ # Possibly a libtool archive, so verify it.
+ if func_lalib_p "$file"; then
+ func_source $dir/$name
+
+ # Delete the libtool libraries and symlinks.
+ for n in $library_names; do
+ func_append rmfiles " $odir/$n"
+ done
+ test -n "$old_library" && func_append rmfiles " $odir/$old_library"
+
+ case "$opt_mode" in
+ clean)
+ case " $library_names " in
+ *" $dlname "*) ;;
+ *) test -n "$dlname" && func_append rmfiles " $odir/$dlname" ;;
+ esac
+ test -n "$libdir" && func_append rmfiles " $odir/$name $odir/${name}i"
+ ;;
+ uninstall)
+ if test -n "$library_names"; then
+ # Do each command in the postuninstall commands.
+ func_execute_cmds "$postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'
+ fi
+
+ if test -n "$old_library"; then
+ # Do each command in the old_postuninstall commands.
+ func_execute_cmds "$old_postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'
+ fi
+ # FIXME: should reinstall the best remaining shared library.
+ ;;
+ esac
+ fi
+ ;;
+
+ *.lo)
+ # Possibly a libtool object, so verify it.
+ if func_lalib_p "$file"; then
+
+ # Read the .lo file
+ func_source $dir/$name
+
+ # Add PIC object to the list of files to remove.
+ if test -n "$pic_object" &&
+ test "$pic_object" != none; then
+ func_append rmfiles " $dir/$pic_object"
+ fi
+
+ # Add non-PIC object to the list of files to remove.
+ if test -n "$non_pic_object" &&
+ test "$non_pic_object" != none; then
+ func_append rmfiles " $dir/$non_pic_object"
+ fi
+ fi
+ ;;
+
+ *)
+ if test "$opt_mode" = clean ; then
+ noexename=$name
+ case $file in
+ *.exe)
+ func_stripname '' '.exe' "$file"
+ file=$func_stripname_result
+ func_stripname '' '.exe' "$name"
+ noexename=$func_stripname_result
+ # $file with .exe has already been added to rmfiles,
+ # add $file without .exe
+ func_append rmfiles " $file"
+ ;;
+ esac
+ # Do a test to see if this is a libtool program.
+ if func_ltwrapper_p "$file"; then
+ if func_ltwrapper_executable_p "$file"; then
+ func_ltwrapper_scriptname "$file"
+ relink_command=
+ func_source $func_ltwrapper_scriptname_result
+ func_append rmfiles " $func_ltwrapper_scriptname_result"
+ else
+ relink_command=
+ func_source $dir/$noexename
+ fi
+
+ # note $name still contains .exe if it was in $file originally
+ # as does the version of $file that was added into $rmfiles
+ func_append rmfiles " $odir/$name $odir/${name}S.${objext}"
+ if test "$fast_install" = yes && test -n "$relink_command"; then
+ func_append rmfiles " $odir/lt-$name"
+ fi
+ if test "X$noexename" != "X$name" ; then
+ func_append rmfiles " $odir/lt-${noexename}.c"
+ fi
+ fi
+ fi
+ ;;
+ esac
+ func_show_eval "$RM $rmfiles" 'exit_status=1'
+ done
+
+ # Try to remove the ${objdir}s in the directories where we deleted files
+ for dir in $rmdirs; do
+ if test -d "$dir"; then
+ func_show_eval "rmdir $dir >/dev/null 2>&1"
+ fi
+ done
+
+ exit $exit_status
+}
+
+{ test "$opt_mode" = uninstall || test "$opt_mode" = clean; } &&
+ func_mode_uninstall ${1+"$@"}
+
+test -z "$opt_mode" && {
+ help="$generic_help"
+ func_fatal_help "you must specify a MODE"
+}
+
+test -z "$exec_cmd" && \
+ func_fatal_help "invalid operation mode \`$opt_mode'"
+
+if test -n "$exec_cmd"; then
+ eval exec "$exec_cmd"
+ exit $EXIT_FAILURE
+fi
+
+exit $exit_status
+
+
+# The TAGs below are defined such that we never get into a situation
+# in which we disable both kinds of libraries. Given conflicting
+# choices, we go for a static library, that is the most portable,
+# since we can't tell whether shared libraries were disabled because
+# the user asked for that or because the platform doesn't support
+# them. This is particularly important on AIX, because we don't
+# support having both static and shared libraries enabled at the same
+# time on that platform, so we default to a shared-only configuration.
+# If a disable-shared tag is given, we'll fallback to a static-only
+# configuration. But we'll never go from static-only to shared-only.
+
+# ### BEGIN LIBTOOL TAG CONFIG: disable-shared
+build_libtool_libs=no
+build_old_libs=yes
+# ### END LIBTOOL TAG CONFIG: disable-shared
+
+# ### BEGIN LIBTOOL TAG CONFIG: disable-static
+build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac`
+# ### END LIBTOOL TAG CONFIG: disable-static
+
+# Local Variables:
+# mode:shell-script
+# sh-indentation:2
+# End:
+# vi:sw=2
+
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/README
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/README (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/README (revision 1772)
@@ -0,0 +1,8 @@
+-------------------------------------------------------
+
+Remember to remove all libraries except the static ones
+
+rm /Users/juanrojo/software/applgrid/amcbridge-install/lib/libamcbridge.la
+rm /Users/juanrojo/software/applgrid/amcbridge-install/lib/libamcbridge.*dylib
+
+-------------------------------------------------------
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/config.sub
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/config.sub (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/config.sub (revision 1772)
@@ -0,0 +1,1705 @@
+#! /bin/sh
+# Configuration validation subroutine script.
+# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
+# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
+# Free Software Foundation, Inc.
+
+timestamp='2009-11-20'
+
+# This file is (in principle) common to ALL GNU software.
+# The presence of a machine in this file suggests that SOME GNU software
+# can handle that machine. It does not imply ALL GNU software can.
+#
+# This file is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
+# 02110-1301, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+
+# Please send patches to <config-patches@gnu.org>. Submit a context
+# diff and a properly formatted GNU ChangeLog entry.
+#
+# Configuration subroutine to validate and canonicalize a configuration type.
+# Supply the specified configuration type as an argument.
+# If it is invalid, we print an error message on stderr and exit with code 1.
+# Otherwise, we print the canonical config type on stdout and succeed.
+
+# You can get the latest version of this script from:
+# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD
+
+# This file is supposed to be the same for all GNU packages
+# and recognize all the CPU types, system types and aliases
+# that are meaningful with *any* GNU software.
+# Each package is responsible for reporting which valid configurations
+# it does not support. The user should be able to distinguish
+# a failure to support a valid configuration from a meaningless
+# configuration.
+
+# The goal of this file is to map all the various variations of a given
+# machine specification into a single specification in the form:
+# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
+# or in some cases, the newer four-part form:
+# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
+# It is wrong to echo any other type of specification.
+
+me=`echo "$0" | sed -e 's,.*/,,'`
+
+usage="\
+Usage: $0 [OPTION] CPU-MFR-OPSYS
+ $0 [OPTION] ALIAS
+
+Canonicalize a configuration name.
+
+Operation modes:
+ -h, --help print this help, then exit
+ -t, --time-stamp print date of last modification, then exit
+ -v, --version print version number, then exit
+
+Report bugs and patches to <config-patches@gnu.org>."
+
+version="\
+GNU config.sub ($timestamp)
+
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001,
+2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+
+This is free software; see the source for copying conditions. There is NO
+warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
+
+help="
+Try \`$me --help' for more information."
+
+# Parse command line
+while test $# -gt 0 ; do
+ case $1 in
+ --time-stamp | --time* | -t )
+ echo "$timestamp" ; exit ;;
+ --version | -v )
+ echo "$version" ; exit ;;
+ --help | --h* | -h )
+ echo "$usage"; exit ;;
+ -- ) # Stop option processing
+ shift; break ;;
+ - ) # Use stdin as input.
+ break ;;
+ -* )
+ echo "$me: invalid option $1$help"
+ exit 1 ;;
+
+ *local*)
+ # First pass through any local machine types.
+ echo $1
+ exit ;;
+
+ * )
+ break ;;
+ esac
+done
+
+case $# in
+ 0) echo "$me: missing argument$help" >&2
+ exit 1;;
+ 1) ;;
+ *) echo "$me: too many arguments$help" >&2
+ exit 1;;
+esac
+
+# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any).
+# Here we must recognize all the valid KERNEL-OS combinations.
+maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
+case $maybe_os in
+ nto-qnx* | linux-gnu* | linux-dietlibc | linux-newlib* | linux-uclibc* | \
+ uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* | \
+ kopensolaris*-gnu* | \
+ storm-chaos* | os2-emx* | rtmk-nova*)
+ os=-$maybe_os
+ basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
+ ;;
+ *)
+ basic_machine=`echo $1 | sed 's/-[^-]*$//'`
+ if [ $basic_machine != $1 ]
+ then os=`echo $1 | sed 's/.*-/-/'`
+ else os=; fi
+ ;;
+esac
+
+### Let's recognize common machines as not being operating systems so
+### that things like config.sub decstation-3100 work. We also
+### recognize some manufacturers as not being operating systems, so we
+### can provide default operating systems below.
+case $os in
+ -sun*os*)
+ # Prevent following clause from handling this invalid input.
+ ;;
+ -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \
+ -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \
+ -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \
+ -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
+ -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
+ -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
+ -apple | -axis | -knuth | -cray | -microblaze)
+ os=
+ basic_machine=$1
+ ;;
+ -bluegene*)
+ os=-cnk
+ ;;
+ -sim | -cisco | -oki | -wec | -winbond)
+ os=
+ basic_machine=$1
+ ;;
+ -scout)
+ ;;
+ -wrs)
+ os=-vxworks
+ basic_machine=$1
+ ;;
+ -chorusos*)
+ os=-chorusos
+ basic_machine=$1
+ ;;
+ -chorusrdb)
+ os=-chorusrdb
+ basic_machine=$1
+ ;;
+ -hiux*)
+ os=-hiuxwe2
+ ;;
+ -sco6)
+ os=-sco5v6
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -sco5)
+ os=-sco3.2v5
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -sco4)
+ os=-sco3.2v4
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -sco3.2.[4-9]*)
+ os=`echo $os | sed -e 's/sco3.2./sco3.2v/'`
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -sco3.2v[4-9]*)
+ # Don't forget version if it is 3.2v4 or newer.
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -sco5v6*)
+ # Don't forget version if it is 3.2v4 or newer.
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -sco*)
+ os=-sco3.2v2
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -udk*)
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -isc)
+ os=-isc2.2
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -clix*)
+ basic_machine=clipper-intergraph
+ ;;
+ -isc*)
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -lynx*)
+ os=-lynxos
+ ;;
+ -ptx*)
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'`
+ ;;
+ -windowsnt*)
+ os=`echo $os | sed -e 's/windowsnt/winnt/'`
+ ;;
+ -psos*)
+ os=-psos
+ ;;
+ -mint | -mint[0-9]*)
+ basic_machine=m68k-atari
+ os=-mint
+ ;;
+esac
+
+# Decode aliases for certain CPU-COMPANY combinations.
+case $basic_machine in
+ # Recognize the basic CPU types without company name.
+ # Some are omitted here because they have special meanings below.
+ 1750a | 580 \
+ | a29k \
+ | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
+ | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
+ | am33_2.0 \
+ | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr | avr32 \
+ | bfin \
+ | c4x | clipper \
+ | d10v | d30v | dlx | dsp16xx \
+ | fido | fr30 | frv \
+ | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
+ | i370 | i860 | i960 | ia64 \
+ | ip2k | iq2000 \
+ | lm32 \
+ | m32c | m32r | m32rle | m68000 | m68k | m88k \
+ | maxq | mb | microblaze | mcore | mep | metag \
+ | mips | mipsbe | mipseb | mipsel | mipsle \
+ | mips16 \
+ | mips64 | mips64el \
+ | mips64octeon | mips64octeonel \
+ | mips64orion | mips64orionel \
+ | mips64r5900 | mips64r5900el \
+ | mips64vr | mips64vrel \
+ | mips64vr4100 | mips64vr4100el \
+ | mips64vr4300 | mips64vr4300el \
+ | mips64vr5000 | mips64vr5000el \
+ | mips64vr5900 | mips64vr5900el \
+ | mipsisa32 | mipsisa32el \
+ | mipsisa32r2 | mipsisa32r2el \
+ | mipsisa64 | mipsisa64el \
+ | mipsisa64r2 | mipsisa64r2el \
+ | mipsisa64sb1 | mipsisa64sb1el \
+ | mipsisa64sr71k | mipsisa64sr71kel \
+ | mipstx39 | mipstx39el \
+ | mn10200 | mn10300 \
+ | moxie \
+ | mt \
+ | msp430 \
+ | nios | nios2 \
+ | ns16k | ns32k \
+ | or32 \
+ | pdp10 | pdp11 | pj | pjl \
+ | powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \
+ | pyramid \
+ | rx \
+ | score \
+ | sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \
+ | sh64 | sh64le \
+ | sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \
+ | sparcv8 | sparcv9 | sparcv9b | sparcv9v \
+ | spu | strongarm \
+ | tahoe | thumb | tic4x | tic80 | tron \
+ | ubicom32 \
+ | v850 | v850e \
+ | we32k \
+ | x86 | xc16x | xscale | xscalee[bl] | xstormy16 | xtensa \
+ | z8k | z80)
+ basic_machine=$basic_machine-unknown
+ ;;
+ m6811 | m68hc11 | m6812 | m68hc12 | picochip)
+ # Motorola 68HC11/12.
+ basic_machine=$basic_machine-unknown
+ os=-none
+ ;;
+ m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k)
+ ;;
+ ms1)
+ basic_machine=mt-unknown
+ ;;
+
+ # We use `pc' rather than `unknown'
+ # because (1) that's what they normally are, and
+ # (2) the word "unknown" tends to confuse beginning users.
+ i*86 | x86_64)
+ basic_machine=$basic_machine-pc
+ ;;
+ # Object if more than one company name word.
+ *-*-*)
+ echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
+ exit 1
+ ;;
+ # Recognize the basic CPU types with company name.
+ 580-* \
+ | a29k-* \
+ | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \
+ | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \
+ | alphapca5[67]-* | alpha64pca5[67]-* | arc-* \
+ | arm-* | armbe-* | armle-* | armeb-* | armv*-* \
+ | avr-* | avr32-* \
+ | bfin-* | bs2000-* \
+ | c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \
+ | clipper-* | craynv-* | cydra-* \
+ | d10v-* | d30v-* | dlx-* \
+ | elxsi-* \
+ | f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \
+ | h8300-* | h8500-* \
+ | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
+ | i*86-* | i860-* | i960-* | ia64-* \
+ | ip2k-* | iq2000-* \
+ | lm32-* \
+ | m32c-* | m32r-* | m32rle-* \
+ | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
+ | m88110-* | m88k-* | maxq-* | mcore-* | metag-* | microblaze-* \
+ | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
+ | mips16-* \
+ | mips64-* | mips64el-* \
+ | mips64octeon-* | mips64octeonel-* \
+ | mips64orion-* | mips64orionel-* \
+ | mips64r5900-* | mips64r5900el-* \
+ | mips64vr-* | mips64vrel-* \
+ | mips64vr4100-* | mips64vr4100el-* \
+ | mips64vr4300-* | mips64vr4300el-* \
+ | mips64vr5000-* | mips64vr5000el-* \
+ | mips64vr5900-* | mips64vr5900el-* \
+ | mipsisa32-* | mipsisa32el-* \
+ | mipsisa32r2-* | mipsisa32r2el-* \
+ | mipsisa64-* | mipsisa64el-* \
+ | mipsisa64r2-* | mipsisa64r2el-* \
+ | mipsisa64sb1-* | mipsisa64sb1el-* \
+ | mipsisa64sr71k-* | mipsisa64sr71kel-* \
+ | mipstx39-* | mipstx39el-* \
+ | mmix-* \
+ | mt-* \
+ | msp430-* \
+ | nios-* | nios2-* \
+ | none-* | np1-* | ns16k-* | ns32k-* \
+ | orion-* \
+ | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
+ | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \
+ | pyramid-* \
+ | romp-* | rs6000-* | rx-* \
+ | sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \
+ | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
+ | sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \
+ | sparclite-* \
+ | sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | strongarm-* | sv1-* | sx?-* \
+ | tahoe-* | thumb-* \
+ | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* | tile-* \
+ | tron-* \
+ | ubicom32-* \
+ | v850-* | v850e-* | vax-* \
+ | we32k-* \
+ | x86-* | x86_64-* | xc16x-* | xps100-* | xscale-* | xscalee[bl]-* \
+ | xstormy16-* | xtensa*-* \
+ | ymp-* \
+ | z8k-* | z80-*)
+ ;;
+ # Recognize the basic CPU types without company name, with glob match.
+ xtensa*)
+ basic_machine=$basic_machine-unknown
+ ;;
+ # Recognize the various machine names and aliases which stand
+ # for a CPU type and a company and sometimes even an OS.
+ 386bsd)
+ basic_machine=i386-unknown
+ os=-bsd
+ ;;
+ 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc)
+ basic_machine=m68000-att
+ ;;
+ 3b*)
+ basic_machine=we32k-att
+ ;;
+ a29khif)
+ basic_machine=a29k-amd
+ os=-udi
+ ;;
+ abacus)
+ basic_machine=abacus-unknown
+ ;;
+ adobe68k)
+ basic_machine=m68010-adobe
+ os=-scout
+ ;;
+ alliant | fx80)
+ basic_machine=fx80-alliant
+ ;;
+ altos | altos3068)
+ basic_machine=m68k-altos
+ ;;
+ am29k)
+ basic_machine=a29k-none
+ os=-bsd
+ ;;
+ amd64)
+ basic_machine=x86_64-pc
+ ;;
+ amd64-*)
+ basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ amdahl)
+ basic_machine=580-amdahl
+ os=-sysv
+ ;;
+ amiga | amiga-*)
+ basic_machine=m68k-unknown
+ ;;
+ amigaos | amigados)
+ basic_machine=m68k-unknown
+ os=-amigaos
+ ;;
+ amigaunix | amix)
+ basic_machine=m68k-unknown
+ os=-sysv4
+ ;;
+ apollo68)
+ basic_machine=m68k-apollo
+ os=-sysv
+ ;;
+ apollo68bsd)
+ basic_machine=m68k-apollo
+ os=-bsd
+ ;;
+ aros)
+ basic_machine=i386-pc
+ os=-aros
+ ;;
+ aux)
+ basic_machine=m68k-apple
+ os=-aux
+ ;;
+ balance)
+ basic_machine=ns32k-sequent
+ os=-dynix
+ ;;
+ blackfin)
+ basic_machine=bfin-unknown
+ os=-linux
+ ;;
+ blackfin-*)
+ basic_machine=bfin-`echo $basic_machine | sed 's/^[^-]*-//'`
+ os=-linux
+ ;;
+ bluegene*)
+ basic_machine=powerpc-ibm
+ os=-cnk
+ ;;
+ c90)
+ basic_machine=c90-cray
+ os=-unicos
+ ;;
+ cegcc)
+ basic_machine=arm-unknown
+ os=-cegcc
+ ;;
+ convex-c1)
+ basic_machine=c1-convex
+ os=-bsd
+ ;;
+ convex-c2)
+ basic_machine=c2-convex
+ os=-bsd
+ ;;
+ convex-c32)
+ basic_machine=c32-convex
+ os=-bsd
+ ;;
+ convex-c34)
+ basic_machine=c34-convex
+ os=-bsd
+ ;;
+ convex-c38)
+ basic_machine=c38-convex
+ os=-bsd
+ ;;
+ cray | j90)
+ basic_machine=j90-cray
+ os=-unicos
+ ;;
+ craynv)
+ basic_machine=craynv-cray
+ os=-unicosmp
+ ;;
+ cr16)
+ basic_machine=cr16-unknown
+ os=-elf
+ ;;
+ crds | unos)
+ basic_machine=m68k-crds
+ ;;
+ crisv32 | crisv32-* | etraxfs*)
+ basic_machine=crisv32-axis
+ ;;
+ cris | cris-* | etrax*)
+ basic_machine=cris-axis
+ ;;
+ crx)
+ basic_machine=crx-unknown
+ os=-elf
+ ;;
+ da30 | da30-*)
+ basic_machine=m68k-da30
+ ;;
+ decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn)
+ basic_machine=mips-dec
+ ;;
+ decsystem10* | dec10*)
+ basic_machine=pdp10-dec
+ os=-tops10
+ ;;
+ decsystem20* | dec20*)
+ basic_machine=pdp10-dec
+ os=-tops20
+ ;;
+ delta | 3300 | motorola-3300 | motorola-delta \
+ | 3300-motorola | delta-motorola)
+ basic_machine=m68k-motorola
+ ;;
+ delta88)
+ basic_machine=m88k-motorola
+ os=-sysv3
+ ;;
+ dicos)
+ basic_machine=i686-pc
+ os=-dicos
+ ;;
+ djgpp)
+ basic_machine=i586-pc
+ os=-msdosdjgpp
+ ;;
+ dpx20 | dpx20-*)
+ basic_machine=rs6000-bull
+ os=-bosx
+ ;;
+ dpx2* | dpx2*-bull)
+ basic_machine=m68k-bull
+ os=-sysv3
+ ;;
+ ebmon29k)
+ basic_machine=a29k-amd
+ os=-ebmon
+ ;;
+ elxsi)
+ basic_machine=elxsi-elxsi
+ os=-bsd
+ ;;
+ encore | umax | mmax)
+ basic_machine=ns32k-encore
+ ;;
+ es1800 | OSE68k | ose68k | ose | OSE)
+ basic_machine=m68k-ericsson
+ os=-ose
+ ;;
+ fx2800)
+ basic_machine=i860-alliant
+ ;;
+ genix)
+ basic_machine=ns32k-ns
+ ;;
+ gmicro)
+ basic_machine=tron-gmicro
+ os=-sysv
+ ;;
+ go32)
+ basic_machine=i386-pc
+ os=-go32
+ ;;
+ h3050r* | hiux*)
+ basic_machine=hppa1.1-hitachi
+ os=-hiuxwe2
+ ;;
+ h8300hms)
+ basic_machine=h8300-hitachi
+ os=-hms
+ ;;
+ h8300xray)
+ basic_machine=h8300-hitachi
+ os=-xray
+ ;;
+ h8500hms)
+ basic_machine=h8500-hitachi
+ os=-hms
+ ;;
+ harris)
+ basic_machine=m88k-harris
+ os=-sysv3
+ ;;
+ hp300-*)
+ basic_machine=m68k-hp
+ ;;
+ hp300bsd)
+ basic_machine=m68k-hp
+ os=-bsd
+ ;;
+ hp300hpux)
+ basic_machine=m68k-hp
+ os=-hpux
+ ;;
+ hp3k9[0-9][0-9] | hp9[0-9][0-9])
+ basic_machine=hppa1.0-hp
+ ;;
+ hp9k2[0-9][0-9] | hp9k31[0-9])
+ basic_machine=m68000-hp
+ ;;
+ hp9k3[2-9][0-9])
+ basic_machine=m68k-hp
+ ;;
+ hp9k6[0-9][0-9] | hp6[0-9][0-9])
+ basic_machine=hppa1.0-hp
+ ;;
+ hp9k7[0-79][0-9] | hp7[0-79][0-9])
+ basic_machine=hppa1.1-hp
+ ;;
+ hp9k78[0-9] | hp78[0-9])
+ # FIXME: really hppa2.0-hp
+ basic_machine=hppa1.1-hp
+ ;;
+ hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893)
+ # FIXME: really hppa2.0-hp
+ basic_machine=hppa1.1-hp
+ ;;
+ hp9k8[0-9][13679] | hp8[0-9][13679])
+ basic_machine=hppa1.1-hp
+ ;;
+ hp9k8[0-9][0-9] | hp8[0-9][0-9])
+ basic_machine=hppa1.0-hp
+ ;;
+ hppa-next)
+ os=-nextstep3
+ ;;
+ hppaosf)
+ basic_machine=hppa1.1-hp
+ os=-osf
+ ;;
+ hppro)
+ basic_machine=hppa1.1-hp
+ os=-proelf
+ ;;
+ i370-ibm* | ibm*)
+ basic_machine=i370-ibm
+ ;;
+# I'm not sure what "Sysv32" means. Should this be sysv3.2?
+ i*86v32)
+ basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+ os=-sysv32
+ ;;
+ i*86v4*)
+ basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+ os=-sysv4
+ ;;
+ i*86v)
+ basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+ os=-sysv
+ ;;
+ i*86sol2)
+ basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+ os=-solaris2
+ ;;
+ i386mach)
+ basic_machine=i386-mach
+ os=-mach
+ ;;
+ i386-vsta | vsta)
+ basic_machine=i386-unknown
+ os=-vsta
+ ;;
+ iris | iris4d)
+ basic_machine=mips-sgi
+ case $os in
+ -irix*)
+ ;;
+ *)
+ os=-irix4
+ ;;
+ esac
+ ;;
+ isi68 | isi)
+ basic_machine=m68k-isi
+ os=-sysv
+ ;;
+ m68knommu)
+ basic_machine=m68k-unknown
+ os=-linux
+ ;;
+ m68knommu-*)
+ basic_machine=m68k-`echo $basic_machine | sed 's/^[^-]*-//'`
+ os=-linux
+ ;;
+ m88k-omron*)
+ basic_machine=m88k-omron
+ ;;
+ magnum | m3230)
+ basic_machine=mips-mips
+ os=-sysv
+ ;;
+ merlin)
+ basic_machine=ns32k-utek
+ os=-sysv
+ ;;
+ microblaze)
+ basic_machine=microblaze-xilinx
+ ;;
+ mingw32)
+ basic_machine=i386-pc
+ os=-mingw32
+ ;;
+ mingw32ce)
+ basic_machine=arm-unknown
+ os=-mingw32ce
+ ;;
+ miniframe)
+ basic_machine=m68000-convergent
+ ;;
+ *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*)
+ basic_machine=m68k-atari
+ os=-mint
+ ;;
+ mips3*-*)
+ basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`
+ ;;
+ mips3*)
+ basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown
+ ;;
+ monitor)
+ basic_machine=m68k-rom68k
+ os=-coff
+ ;;
+ morphos)
+ basic_machine=powerpc-unknown
+ os=-morphos
+ ;;
+ msdos)
+ basic_machine=i386-pc
+ os=-msdos
+ ;;
+ ms1-*)
+ basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'`
+ ;;
+ mvs)
+ basic_machine=i370-ibm
+ os=-mvs
+ ;;
+ ncr3000)
+ basic_machine=i486-ncr
+ os=-sysv4
+ ;;
+ netbsd386)
+ basic_machine=i386-unknown
+ os=-netbsd
+ ;;
+ netwinder)
+ basic_machine=armv4l-rebel
+ os=-linux
+ ;;
+ news | news700 | news800 | news900)
+ basic_machine=m68k-sony
+ os=-newsos
+ ;;
+ news1000)
+ basic_machine=m68030-sony
+ os=-newsos
+ ;;
+ news-3600 | risc-news)
+ basic_machine=mips-sony
+ os=-newsos
+ ;;
+ necv70)
+ basic_machine=v70-nec
+ os=-sysv
+ ;;
+ next | m*-next )
+ basic_machine=m68k-next
+ case $os in
+ -nextstep* )
+ ;;
+ -ns2*)
+ os=-nextstep2
+ ;;
+ *)
+ os=-nextstep3
+ ;;
+ esac
+ ;;
+ nh3000)
+ basic_machine=m68k-harris
+ os=-cxux
+ ;;
+ nh[45]000)
+ basic_machine=m88k-harris
+ os=-cxux
+ ;;
+ nindy960)
+ basic_machine=i960-intel
+ os=-nindy
+ ;;
+ mon960)
+ basic_machine=i960-intel
+ os=-mon960
+ ;;
+ nonstopux)
+ basic_machine=mips-compaq
+ os=-nonstopux
+ ;;
+ np1)
+ basic_machine=np1-gould
+ ;;
+ nsr-tandem)
+ basic_machine=nsr-tandem
+ ;;
+ op50n-* | op60c-*)
+ basic_machine=hppa1.1-oki
+ os=-proelf
+ ;;
+ openrisc | openrisc-*)
+ basic_machine=or32-unknown
+ ;;
+ os400)
+ basic_machine=powerpc-ibm
+ os=-os400
+ ;;
+ OSE68000 | ose68000)
+ basic_machine=m68000-ericsson
+ os=-ose
+ ;;
+ os68k)
+ basic_machine=m68k-none
+ os=-os68k
+ ;;
+ pa-hitachi)
+ basic_machine=hppa1.1-hitachi
+ os=-hiuxwe2
+ ;;
+ paragon)
+ basic_machine=i860-intel
+ os=-osf
+ ;;
+ parisc)
+ basic_machine=hppa-unknown
+ os=-linux
+ ;;
+ parisc-*)
+ basic_machine=hppa-`echo $basic_machine | sed 's/^[^-]*-//'`
+ os=-linux
+ ;;
+ pbd)
+ basic_machine=sparc-tti
+ ;;
+ pbb)
+ basic_machine=m68k-tti
+ ;;
+ pc532 | pc532-*)
+ basic_machine=ns32k-pc532
+ ;;
+ pc98)
+ basic_machine=i386-pc
+ ;;
+ pc98-*)
+ basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ pentium | p5 | k5 | k6 | nexgen | viac3)
+ basic_machine=i586-pc
+ ;;
+ pentiumpro | p6 | 6x86 | athlon | athlon_*)
+ basic_machine=i686-pc
+ ;;
+ pentiumii | pentium2 | pentiumiii | pentium3)
+ basic_machine=i686-pc
+ ;;
+ pentium4)
+ basic_machine=i786-pc
+ ;;
+ pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*)
+ basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ pentiumpro-* | p6-* | 6x86-* | athlon-*)
+ basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*)
+ basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ pentium4-*)
+ basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ pn)
+ basic_machine=pn-gould
+ ;;
+ power) basic_machine=power-ibm
+ ;;
+ ppc) basic_machine=powerpc-unknown
+ ;;
+ ppc-*) basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ ppcle | powerpclittle | ppc-le | powerpc-little)
+ basic_machine=powerpcle-unknown
+ ;;
+ ppcle-* | powerpclittle-*)
+ basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ ppc64) basic_machine=powerpc64-unknown
+ ;;
+ ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ ppc64le | powerpc64little | ppc64-le | powerpc64-little)
+ basic_machine=powerpc64le-unknown
+ ;;
+ ppc64le-* | powerpc64little-*)
+ basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ ps2)
+ basic_machine=i386-ibm
+ ;;
+ pw32)
+ basic_machine=i586-unknown
+ os=-pw32
+ ;;
+ rdos)
+ basic_machine=i386-pc
+ os=-rdos
+ ;;
+ rom68k)
+ basic_machine=m68k-rom68k
+ os=-coff
+ ;;
+ rm[46]00)
+ basic_machine=mips-siemens
+ ;;
+ rtpc | rtpc-*)
+ basic_machine=romp-ibm
+ ;;
+ s390 | s390-*)
+ basic_machine=s390-ibm
+ ;;
+ s390x | s390x-*)
+ basic_machine=s390x-ibm
+ ;;
+ sa29200)
+ basic_machine=a29k-amd
+ os=-udi
+ ;;
+ sb1)
+ basic_machine=mipsisa64sb1-unknown
+ ;;
+ sb1el)
+ basic_machine=mipsisa64sb1el-unknown
+ ;;
+ sde)
+ basic_machine=mipsisa32-sde
+ os=-elf
+ ;;
+ sei)
+ basic_machine=mips-sei
+ os=-seiux
+ ;;
+ sequent)
+ basic_machine=i386-sequent
+ ;;
+ sh)
+ basic_machine=sh-hitachi
+ os=-hms
+ ;;
+ sh5el)
+ basic_machine=sh5le-unknown
+ ;;
+ sh64)
+ basic_machine=sh64-unknown
+ ;;
+ sparclite-wrs | simso-wrs)
+ basic_machine=sparclite-wrs
+ os=-vxworks
+ ;;
+ sps7)
+ basic_machine=m68k-bull
+ os=-sysv2
+ ;;
+ spur)
+ basic_machine=spur-unknown
+ ;;
+ st2000)
+ basic_machine=m68k-tandem
+ ;;
+ stratus)
+ basic_machine=i860-stratus
+ os=-sysv4
+ ;;
+ sun2)
+ basic_machine=m68000-sun
+ ;;
+ sun2os3)
+ basic_machine=m68000-sun
+ os=-sunos3
+ ;;
+ sun2os4)
+ basic_machine=m68000-sun
+ os=-sunos4
+ ;;
+ sun3os3)
+ basic_machine=m68k-sun
+ os=-sunos3
+ ;;
+ sun3os4)
+ basic_machine=m68k-sun
+ os=-sunos4
+ ;;
+ sun4os3)
+ basic_machine=sparc-sun
+ os=-sunos3
+ ;;
+ sun4os4)
+ basic_machine=sparc-sun
+ os=-sunos4
+ ;;
+ sun4sol2)
+ basic_machine=sparc-sun
+ os=-solaris2
+ ;;
+ sun3 | sun3-*)
+ basic_machine=m68k-sun
+ ;;
+ sun4)
+ basic_machine=sparc-sun
+ ;;
+ sun386 | sun386i | roadrunner)
+ basic_machine=i386-sun
+ ;;
+ sv1)
+ basic_machine=sv1-cray
+ os=-unicos
+ ;;
+ symmetry)
+ basic_machine=i386-sequent
+ os=-dynix
+ ;;
+ t3e)
+ basic_machine=alphaev5-cray
+ os=-unicos
+ ;;
+ t90)
+ basic_machine=t90-cray
+ os=-unicos
+ ;;
+ tic54x | c54x*)
+ basic_machine=tic54x-unknown
+ os=-coff
+ ;;
+ tic55x | c55x*)
+ basic_machine=tic55x-unknown
+ os=-coff
+ ;;
+ tic6x | c6x*)
+ basic_machine=tic6x-unknown
+ os=-coff
+ ;;
+ tile*)
+ basic_machine=tile-unknown
+ os=-linux-gnu
+ ;;
+ tx39)
+ basic_machine=mipstx39-unknown
+ ;;
+ tx39el)
+ basic_machine=mipstx39el-unknown
+ ;;
+ toad1)
+ basic_machine=pdp10-xkl
+ os=-tops20
+ ;;
+ tower | tower-32)
+ basic_machine=m68k-ncr
+ ;;
+ tpf)
+ basic_machine=s390x-ibm
+ os=-tpf
+ ;;
+ udi29k)
+ basic_machine=a29k-amd
+ os=-udi
+ ;;
+ ultra3)
+ basic_machine=a29k-nyu
+ os=-sym1
+ ;;
+ v810 | necv810)
+ basic_machine=v810-nec
+ os=-none
+ ;;
+ vaxv)
+ basic_machine=vax-dec
+ os=-sysv
+ ;;
+ vms)
+ basic_machine=vax-dec
+ os=-vms
+ ;;
+ vpp*|vx|vx-*)
+ basic_machine=f301-fujitsu
+ ;;
+ vxworks960)
+ basic_machine=i960-wrs
+ os=-vxworks
+ ;;
+ vxworks68)
+ basic_machine=m68k-wrs
+ os=-vxworks
+ ;;
+ vxworks29k)
+ basic_machine=a29k-wrs
+ os=-vxworks
+ ;;
+ w65*)
+ basic_machine=w65-wdc
+ os=-none
+ ;;
+ w89k-*)
+ basic_machine=hppa1.1-winbond
+ os=-proelf
+ ;;
+ xbox)
+ basic_machine=i686-pc
+ os=-mingw32
+ ;;
+ xps | xps100)
+ basic_machine=xps100-honeywell
+ ;;
+ ymp)
+ basic_machine=ymp-cray
+ os=-unicos
+ ;;
+ z8k-*-coff)
+ basic_machine=z8k-unknown
+ os=-sim
+ ;;
+ z80-*-coff)
+ basic_machine=z80-unknown
+ os=-sim
+ ;;
+ none)
+ basic_machine=none-none
+ os=-none
+ ;;
+
+# Here we handle the default manufacturer of certain CPU types. It is in
+# some cases the only manufacturer, in others, it is the most popular.
+ w89k)
+ basic_machine=hppa1.1-winbond
+ ;;
+ op50n)
+ basic_machine=hppa1.1-oki
+ ;;
+ op60c)
+ basic_machine=hppa1.1-oki
+ ;;
+ romp)
+ basic_machine=romp-ibm
+ ;;
+ mmix)
+ basic_machine=mmix-knuth
+ ;;
+ rs6000)
+ basic_machine=rs6000-ibm
+ ;;
+ vax)
+ basic_machine=vax-dec
+ ;;
+ pdp10)
+ # there are many clones, so DEC is not a safe bet
+ basic_machine=pdp10-unknown
+ ;;
+ pdp11)
+ basic_machine=pdp11-dec
+ ;;
+ we32k)
+ basic_machine=we32k-att
+ ;;
+ sh[1234] | sh[24]a | sh[24]aeb | sh[34]eb | sh[1234]le | sh[23]ele)
+ basic_machine=sh-unknown
+ ;;
+ sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v)
+ basic_machine=sparc-sun
+ ;;
+ cydra)
+ basic_machine=cydra-cydrome
+ ;;
+ orion)
+ basic_machine=orion-highlevel
+ ;;
+ orion105)
+ basic_machine=clipper-highlevel
+ ;;
+ mac | mpw | mac-mpw)
+ basic_machine=m68k-apple
+ ;;
+ pmac | pmac-mpw)
+ basic_machine=powerpc-apple
+ ;;
+ *-unknown)
+ # Make sure to match an already-canonicalized machine name.
+ ;;
+ *)
+ echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
+ exit 1
+ ;;
+esac
+
+# Here we canonicalize certain aliases for manufacturers.
+case $basic_machine in
+ *-digital*)
+ basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'`
+ ;;
+ *-commodore*)
+ basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'`
+ ;;
+ *)
+ ;;
+esac
+
+# Decode manufacturer-specific aliases for certain operating systems.
+
+if [ x"$os" != x"" ]
+then
+case $os in
+ # First match some system type aliases
+ # that might get confused with valid system types.
+ # -solaris* is a basic system type, with this one exception.
+ -auroraux)
+ os=-auroraux
+ ;;
+ -solaris1 | -solaris1.*)
+ os=`echo $os | sed -e 's|solaris1|sunos4|'`
+ ;;
+ -solaris)
+ os=-solaris2
+ ;;
+ -svr4*)
+ os=-sysv4
+ ;;
+ -unixware*)
+ os=-sysv4.2uw
+ ;;
+ -gnu/linux*)
+ os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'`
+ ;;
+ # First accept the basic system types.
+ # The portable systems comes first.
+ # Each alternative MUST END IN A *, to match a version number.
+ # -sysv* is not here because it comes later, after sysvr4.
+ -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \
+ | -*vms* | -sco* | -esix* | -isc* | -aix* | -cnk* | -sunos | -sunos[34]*\
+ | -hpux* | -unos* | -osf* | -luna* | -dgux* | -auroraux* | -solaris* \
+ | -sym* | -kopensolaris* \
+ | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \
+ | -aos* | -aros* \
+ | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
+ | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
+ | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \
+ | -openbsd* | -solidbsd* \
+ | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \
+ | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
+ | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
+ | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
+ | -chorusos* | -chorusrdb* | -cegcc* \
+ | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
+ | -mingw32* | -linux-gnu* | -linux-newlib* | -linux-uclibc* \
+ | -uxpv* | -beos* | -mpeix* | -udk* \
+ | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
+ | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
+ | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
+ | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
+ | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
+ | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \
+ | -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -es*)
+ # Remember, each alternative MUST END IN *, to match a version number.
+ ;;
+ -qnx*)
+ case $basic_machine in
+ x86-* | i*86-*)
+ ;;
+ *)
+ os=-nto$os
+ ;;
+ esac
+ ;;
+ -nto-qnx*)
+ ;;
+ -nto*)
+ os=`echo $os | sed -e 's|nto|nto-qnx|'`
+ ;;
+ -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \
+ | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \
+ | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*)
+ ;;
+ -mac*)
+ os=`echo $os | sed -e 's|mac|macos|'`
+ ;;
+ -linux-dietlibc)
+ os=-linux-dietlibc
+ ;;
+ -linux*)
+ os=`echo $os | sed -e 's|linux|linux-gnu|'`
+ ;;
+ -sunos5*)
+ os=`echo $os | sed -e 's|sunos5|solaris2|'`
+ ;;
+ -sunos6*)
+ os=`echo $os | sed -e 's|sunos6|solaris3|'`
+ ;;
+ -opened*)
+ os=-openedition
+ ;;
+ -os400*)
+ os=-os400
+ ;;
+ -wince*)
+ os=-wince
+ ;;
+ -osfrose*)
+ os=-osfrose
+ ;;
+ -osf*)
+ os=-osf
+ ;;
+ -utek*)
+ os=-bsd
+ ;;
+ -dynix*)
+ os=-bsd
+ ;;
+ -acis*)
+ os=-aos
+ ;;
+ -atheos*)
+ os=-atheos
+ ;;
+ -syllable*)
+ os=-syllable
+ ;;
+ -386bsd)
+ os=-bsd
+ ;;
+ -ctix* | -uts*)
+ os=-sysv
+ ;;
+ -nova*)
+ os=-rtmk-nova
+ ;;
+ -ns2 )
+ os=-nextstep2
+ ;;
+ -nsk*)
+ os=-nsk
+ ;;
+ # Preserve the version number of sinix5.
+ -sinix5.*)
+ os=`echo $os | sed -e 's|sinix|sysv|'`
+ ;;
+ -sinix*)
+ os=-sysv4
+ ;;
+ -tpf*)
+ os=-tpf
+ ;;
+ -triton*)
+ os=-sysv3
+ ;;
+ -oss*)
+ os=-sysv3
+ ;;
+ -svr4)
+ os=-sysv4
+ ;;
+ -svr3)
+ os=-sysv3
+ ;;
+ -sysvr4)
+ os=-sysv4
+ ;;
+ # This must come after -sysvr4.
+ -sysv*)
+ ;;
+ -ose*)
+ os=-ose
+ ;;
+ -es1800*)
+ os=-ose
+ ;;
+ -xenix)
+ os=-xenix
+ ;;
+ -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
+ os=-mint
+ ;;
+ -aros*)
+ os=-aros
+ ;;
+ -kaos*)
+ os=-kaos
+ ;;
+ -zvmoe)
+ os=-zvmoe
+ ;;
+ -dicos*)
+ os=-dicos
+ ;;
+ -none)
+ ;;
+ *)
+ # Get rid of the `-' at the beginning of $os.
+ os=`echo $os | sed 's/[^-]*-//'`
+ echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2
+ exit 1
+ ;;
+esac
+else
+
+# Here we handle the default operating systems that come with various machines.
+# The value should be what the vendor currently ships out the door with their
+# machine or put another way, the most popular os provided with the machine.
+
+# Note that if you're going to try to match "-MANUFACTURER" here (say,
+# "-sun"), then you have to tell the case statement up towards the top
+# that MANUFACTURER isn't an operating system. Otherwise, code above
+# will signal an error saying that MANUFACTURER isn't an operating
+# system, and we'll never get to this point.
+
+case $basic_machine in
+ score-*)
+ os=-elf
+ ;;
+ spu-*)
+ os=-elf
+ ;;
+ *-acorn)
+ os=-riscix1.2
+ ;;
+ arm*-rebel)
+ os=-linux
+ ;;
+ arm*-semi)
+ os=-aout
+ ;;
+ c4x-* | tic4x-*)
+ os=-coff
+ ;;
+ # This must come before the *-dec entry.
+ pdp10-*)
+ os=-tops20
+ ;;
+ pdp11-*)
+ os=-none
+ ;;
+ *-dec | vax-*)
+ os=-ultrix4.2
+ ;;
+ m68*-apollo)
+ os=-domain
+ ;;
+ i386-sun)
+ os=-sunos4.0.2
+ ;;
+ m68000-sun)
+ os=-sunos3
+ # This also exists in the configure program, but was not the
+ # default.
+ # os=-sunos4
+ ;;
+ m68*-cisco)
+ os=-aout
+ ;;
+ mep-*)
+ os=-elf
+ ;;
+ mips*-cisco)
+ os=-elf
+ ;;
+ mips*-*)
+ os=-elf
+ ;;
+ or32-*)
+ os=-coff
+ ;;
+ *-tti) # must be before sparc entry or we get the wrong os.
+ os=-sysv3
+ ;;
+ sparc-* | *-sun)
+ os=-sunos4.1.1
+ ;;
+ *-be)
+ os=-beos
+ ;;
+ *-haiku)
+ os=-haiku
+ ;;
+ *-ibm)
+ os=-aix
+ ;;
+ *-knuth)
+ os=-mmixware
+ ;;
+ *-wec)
+ os=-proelf
+ ;;
+ *-winbond)
+ os=-proelf
+ ;;
+ *-oki)
+ os=-proelf
+ ;;
+ *-hp)
+ os=-hpux
+ ;;
+ *-hitachi)
+ os=-hiux
+ ;;
+ i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent)
+ os=-sysv
+ ;;
+ *-cbm)
+ os=-amigaos
+ ;;
+ *-dg)
+ os=-dgux
+ ;;
+ *-dolphin)
+ os=-sysv3
+ ;;
+ m68k-ccur)
+ os=-rtu
+ ;;
+ m88k-omron*)
+ os=-luna
+ ;;
+ *-next )
+ os=-nextstep
+ ;;
+ *-sequent)
+ os=-ptx
+ ;;
+ *-crds)
+ os=-unos
+ ;;
+ *-ns)
+ os=-genix
+ ;;
+ i370-*)
+ os=-mvs
+ ;;
+ *-next)
+ os=-nextstep3
+ ;;
+ *-gould)
+ os=-sysv
+ ;;
+ *-highlevel)
+ os=-bsd
+ ;;
+ *-encore)
+ os=-bsd
+ ;;
+ *-sgi)
+ os=-irix
+ ;;
+ *-siemens)
+ os=-sysv4
+ ;;
+ *-masscomp)
+ os=-rtu
+ ;;
+ f30[01]-fujitsu | f700-fujitsu)
+ os=-uxpv
+ ;;
+ *-rom68k)
+ os=-coff
+ ;;
+ *-*bug)
+ os=-coff
+ ;;
+ *-apple)
+ os=-macos
+ ;;
+ *-atari*)
+ os=-mint
+ ;;
+ *)
+ os=-none
+ ;;
+esac
+fi
+
+# Here we handle the case where we know the os, and the CPU type, but not the
+# manufacturer. We pick the logical manufacturer.
+vendor=unknown
+case $basic_machine in
+ *-unknown)
+ case $os in
+ -riscix*)
+ vendor=acorn
+ ;;
+ -sunos*)
+ vendor=sun
+ ;;
+ -cnk*|-aix*)
+ vendor=ibm
+ ;;
+ -beos*)
+ vendor=be
+ ;;
+ -hpux*)
+ vendor=hp
+ ;;
+ -mpeix*)
+ vendor=hp
+ ;;
+ -hiux*)
+ vendor=hitachi
+ ;;
+ -unos*)
+ vendor=crds
+ ;;
+ -dgux*)
+ vendor=dg
+ ;;
+ -luna*)
+ vendor=omron
+ ;;
+ -genix*)
+ vendor=ns
+ ;;
+ -mvs* | -opened*)
+ vendor=ibm
+ ;;
+ -os400*)
+ vendor=ibm
+ ;;
+ -ptx*)
+ vendor=sequent
+ ;;
+ -tpf*)
+ vendor=ibm
+ ;;
+ -vxsim* | -vxworks* | -windiss*)
+ vendor=wrs
+ ;;
+ -aux*)
+ vendor=apple
+ ;;
+ -hms*)
+ vendor=hitachi
+ ;;
+ -mpw* | -macos*)
+ vendor=apple
+ ;;
+ -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
+ vendor=atari
+ ;;
+ -vos*)
+ vendor=stratus
+ ;;
+ esac
+ basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"`
+ ;;
+esac
+
+echo $basic_machine$os
+exit
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "timestamp='"
+# time-stamp-format: "%:y-%02m-%02d"
+# time-stamp-end: "'"
+# End:
Property changes on: nnlo-bridge/tags/nnlo-bridge-00-00-44/config.sub
___________________________________________________________________
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/utils/makerunfile
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/utils/makerunfile (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/utils/makerunfile (revision 1772)
@@ -0,0 +1,177 @@
+#!/bin/bash
+# emacs: this is -*- sh -*-
+#
+# File: makerunfile
+#
+# Copyright (C) M Sutton (sutt@cern.ch)
+# Description:
+#
+#
+# Created: M Sutton (sutt@cern.ch) Mon 14 Aug 2017 18:32:28 CEST
+# Modified:
+#
+
+# takes 2 arguments - variable to replace (by comment) : value to use
+function setvalue {
+ sed "s|[^[:space:]]*\([[:space:]]*\)\!\([[:space:]]\+\)$1|$2\1\!\2$1|g"
+}
+
+function usage {
+ [ $# -gt 1 ] && echo $2 && echo
+ echo "Usage: $(basename $0) [args] "
+ echo
+ echo -e " -f , --file INPUTFILE \tGenerate runfile for INPUTFILE ";
+ echo -e " -o , --output OUTPUTFILE \tWrite generated filr to OUTPUTFILE";
+ echo
+ echo -e " -d , --runid RUNID \tUse RUNID as identifier for the job";
+ echo -e " -s , --subprocess SUBPROCESS \tGenerate for SUBPROCESS (LO, R, V, RR etc)"
+ echo -e " -r , --randomseed SEED \tRun using random SEED"
+ echo -e " -i , --iterations NUMITER \tRun for NUMITER iterations"
+ echo -e " -n , --numevents NUMEVENTS \tRun for NUMEVENTS events per iteration"
+ echo
+ echo -e " -w , --warmup \tRun WARMUP job"
+ echo -e " -p , --production \tRun PRODUCTION job"
+ echo -e " -g , --grids \tRun generate grids"
+ echo -e " -u , --unitphase \tRun with UNITPHASE"
+ echo
+ echo -e " -v , --verbose \tPrint verbose output"
+ echo -e " -h , --help \tThis help"
+ [ $# -gt 0 ]; exit $1
+ exit 0
+}
+
+
+[ $# -gt 0 ] || usage 0
+
+
+FILE=
+PROCESS=
+OUTPUT=
+
+NUMEVENTS=0
+NUMITER=0
+SEED=
+
+UNITPHASE=0
+
+PRODUCTION=0
+WARMUP=0
+GRID=0
+RUNID=
+
+VERBOSE=0
+
+# echo "$(date) $0 running ..."
+
+
+args=$(getopt -ql "searchpath:" -o "f:d:o:p:r:n:i:uwpgvh" -- "$@")
+
+
+while [ $# -ge 1 ]; do
+ case "$1" in
+ --) shift ; break ;;
+ -f | --file ) if [ $# -lt 2 ]; then usage 1; fi ; FILE="$2" ; shift ;;
+ -o | --output ) if [ $# -lt 2 ]; then usage 1; fi ; OUTPUT="$2" ; shift ;;
+ -d | --runid ) if [ $# -lt 2 ]; then usage 1; fi ; RUNID="$2" ; shift ;;
+ -s | --subprocess ) if [ $# -lt 2 ]; then usage 1; fi ; PROCESS="$2" ; shift ;;
+ -n | --numevents ) if [ $# -lt 2 ]; then usage 1; fi ; NUMEVENTS="$2" ; shift ;;
+ -i | --iter ) if [ $# -lt 2 ]; then usage 1; fi ; NUMITER="$2" ; shift ;;
+ -r | --randomseed ) if [ $# -lt 2 ]; then usage 1; fi ; SEED="$2" ; shift ;;
+ -p | --production ) PRODUCTION=1 ;;
+ -w | --warmup ) WARMUP=1 ;;
+ -g | --grids ) GRID=1 ;;
+ -u | --unitphase ) UNITPHASE=1 ;;
+ -v | --verbose ) VERBOSE=1 ;;
+ -h | --help ) usage 0;;
+ *) PKGS="$PKGS $1" ;;
+ esac
+ shift
+done
+
+
+
+[ -z $FILE ] && usage 1 "no input file specified"
+[ -z $RUNID ] && usage 1 "no RUNID specified"
+[ -z $OUTPUT ] && usage 2 "no output file specified"
+[ -z $SEED ] && usage 2 "no SEED specified"
+
+[ $NUMEVENTS -lt 1 ] && usage 3 "not enough events per iteration"
+[ $NUMITER -lt 1 ] && usage 3 "not enough iterations"
+
+[ -z $PROCESS ] && usage 4 "no processes specified"
+
+[ -e $FILE ] || usage 5 "file does not exist: $FILE"
+
+VARIABLES="@RUNID@ @EVENTS@ @ITERATIONS@ @PROCESS@ @SEED@ @GRID@ @WARMUP@ @PRODUCTION@"
+for VAR in $VARIABLES; do
+ !( grep -q "$VAR" $FILE ) && echo "Variable $VAR not found in file: $FILE" && exit 1
+done
+
+
+echo "FILE: $FILE"
+echo "OUTPUT: $OUTPUT"
+
+if [ $VERBOSE -eq 1 ]; then
+ echo "RUNID: $RUNID"
+ echo "ITERATIONS: $NUMITER"
+ echo "EVENTS: $NUMEVENTS"
+ echo "SUBPROCESS: $PROCESS"
+ echo "SEED: $SEED"
+
+ echo "WARMUP: $WARMUP"
+ echo "PRODUCTION: $PRODUCTION"
+ echo "GRIDS: $GRIDS"
+ echo "UNITPHASE: $UNITPHASE"
+fi
+
+
+TMP0=$(mktemp /tmp/temp.XXXXX)
+
+cp $FILE $TMP0
+
+ALL="all"
+[ $PROCESS == "RRa" ] && ALL="a" && PROCESS="RR"
+[ $PROCESS == "RRb" ] && ALL="b" && PROCESS="RR"
+
+cat $TMP0 | sed "s|@RUNID@|$RUNID|g" | sed "s|@EVENTS@|$NUMEVENTS|g" | sed "s|@ITERATIONS@|$NUMITER|g" | sed "s|@PROCESS@|$PROCESS|g" > $OUTPUT
+
+cp $OUTPUT $TMP0
+
+cat $TMP0 | setvalue "RR a/b region" $ALL > $OUTPUT
+
+cp $OUTPUT $TMP0
+[ $UNITPHASE -eq 1 ] && cat $TMP0 | sed 's|.*UNIT_PHASE|UNIT_PHASE|g' > $OUTPUT
+
+cp $OUTPUT $TMP0
+[ $UNITPHASE -eq 0 ] && cat $TMP0 | grep -v UNIT_PHASE > $OUTPUT
+
+cp $OUTPUT $TMP0
+WARM=".false."
+[ $WARMUP -eq 1 ] && WARM=".true."
+cat $TMP0 | sed "s|@WARMUP@|$WARM|g" > $OUTPUT
+
+
+cp $OUTPUT $TMP0
+PROD=".false."
+[ $PRODUCTION -eq 1 ] && PROD=".true."
+cat $TMP0 | sed "s|@PRODUCTION@|$PROD|g" > $OUTPUT
+
+
+cp $OUTPUT $TMP0
+if [ $GRID -eq 0 ]; then
+ cat $TMP0 | sed "s|@GRID@.*||g" > $OUTPUT
+else
+ cat $TMP0 | sed "s|@GRID@| |g" > $OUTPUT
+fi
+
+cp $OUTPUT $TMP0
+cat $TMP0 | sed "s|@SEED@|$SEED|g" > $OUTPUT
+
+
+if [ $VERBOSE -eq 1 ]; then
+ echo
+ echo "OUTPUT: $OUTPUT:"
+ cat $OUTPUT
+fi
+
+
Property changes on: nnlo-bridge/tags/nnlo-bridge-00-00-44/utils/makerunfile
___________________________________________________________________
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/utils/makecards
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/utils/makecards (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/utils/makecards (revision 1772)
@@ -0,0 +1,115 @@
+#!/bin/bash
+
+
+function usage {
+ if [ $# -gt 1 ]; then echo "$2"; echo; fi
+ echo "Usage: $(basename $0) [args] chains0 chain1 ..."
+ echo " -o , --output FILE output into file"
+ echo " -e , --events EVENTS number of events"
+ echo " -p , --process PROCESS process to use"
+ echo " -g , --grid TYPE type of grids to generate"
+ echo " -s , --seed SEED seed"
+ echo " -w , --warmup run warmup phase"
+ echo " -u , --unit use unit phasespace"
+ echo " -h , --help this help"
+ if [ $# -ge 1 ]; then
+ exit $1
+ else
+ exit 0
+ fi
+}
+
+
+function replace {
+ [ $# -eq 3 ] || usage 1 "incorrect option to replace"
+ sed "s|\([^[:space:]]*\)\([[:space:]]*\)\(\![[:space:]]*$2.*\)|$3\2\3|g" $1
+}
+
+
+# echo "$(date) $0 running ..."
+
+INPUT=
+FILE=
+EVENTS=
+PROCESS=
+UNIT=0
+GRID=
+WARMUP=0
+SEED=1
+
+VERBOSE=0
+
+args=$(getopt -ql "searchpath:" -o "o:e:p:g:wuhv" -- "$@")
+
+while [ $# -ge 1 ]; do
+ case "$1" in
+# --) shift ; break ;;
+ -o | --output ) [ $# -ge 2 ] || usage 1 "no output filename"; FILE="$2" ; shift ;;
+ -e | --events ) [ $# -ge 2 ] || usage 1 "no events given"; EVENTS="$2" ; shift ;;
+ -p | --process ) [ $# -ge 2 ] || usage 1 "no process specifed"; PROCESS="$2" ; shift ;;
+ -g | --grid ) [ $# -ge 2 ] || usage 1 "no grid type specified"; GRID="$2" ; shift ;;
+ -s | --seed ) [ $# -ge 2 ] || usage 1 "no seed specified"; SEED="$2" ; shift ;;
+ -w | --warmup ) WARMUP=1 ;;
+ -u | --unit ) UNIT=1 ;;
+ -v | --verbose ) VERBOSE=1 ;;
+ -h | --help ) usage 0 ;;
+ *) [ "x$INPUT" == "x" ] || usage 1 "input filename already given" ; INPUT=$1 ;;
+ esac
+ shift
+done
+
+[ "x$INPUT" == "x" ] && usage 2 "input file not defined"
+[ "x$PROCESS" == "x" ] && usage 2 "process not specified"
+[ "x$EVENTS" == "x" ] && usage 2 "number of events not provided"
+# [ "x$FILE" == "x" ] && usage 2 "output file not defined"
+
+STDOUT=0
+if [ "x$FILE" == "x" ]; then
+ FILE=/tmp/.run
+ STDOUT=1
+fi
+
+if [ $VERBOSE -eq 1 ]; then
+ echo "input: $INPUT"
+ echo "file: $FILE"
+ echo "events: $EVENTS"
+ echo "process: $PROCESS"
+ echo "seed: $SEED"
+ echo "unit: $UNIT"
+ echo "grid: $GRID"
+ echo "warmup: $WARMUP"
+fi
+
+if [ $VERBOSE -eq 1 -a $SEED -eq 1 ]; then echo "default seed ( $SEED ) being used"; fi
+
+WFLAG=.false.
+[ $WARMUP -eq 1 ] && WFLAG=.true.
+
+replace $INPUT "Seed number" $SEED > ${FILE}_tmp
+replace ${FILE}_tmp "Number of events" $EVENTS > $FILE
+replace $FILE "Warmup" $WFLAG > ${FILE}_tmp
+
+if [ $UNIT -eq 0 ]; then
+ grep -v "UNIT_PHASE" ${FILE}_tmp > $FILE
+else
+ cp ${FILE}_tmp $FILE
+fi
+
+if [ "x$GRID" == "x" ]; then
+ sed 's|GRID.*||g' $FILE > ${FILE}_tmp
+else
+ sed "s|GRID\(.*\)\.appl|\1\.$GRID|g" $FILE > ${FILE}_tmp
+fi
+
+sed "s|PROCESS|$PROCESS|g" ${FILE}_tmp > $FILE
+
+# diff $INPUT $FILE
+
+rm ${FILE}_tmp
+
+if [ $STDOUT -eq 1 ]; then
+ cat $FILE
+ rm $FILE
+fi
+
+[ $VERBOSE -eq 1 ] && echo "done"
\ No newline at end of file
Property changes on: nnlo-bridge/tags/nnlo-bridge-00-00-44/utils/makecards
___________________________________________________________________
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/configure.ac
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/configure.ac (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/configure.ac (revision 1772)
@@ -0,0 +1,116 @@
+AC_INIT(nnlo-bridge, 0.0.44, sutt@cern.ch, nnlo-bridge, http://applgrid.hepforge.org)
+AM_INIT_AUTOMAKE
+AM_CONFIG_HEADER(amconfig.h:amconfig.in)
+#AC_PROG_FC
+#AC_CHECK_PROGS(FC, [gfortran g77 f77 fort77 f90], no)
+#AC_PROG_FC
+#AC_LANG_PUSH(Fortran)
+#AC_FC_SRCEXT(f90)
+#AC_FC_LIBRARY_LDFLAGS
+#AC_FC_WRAPPERS
+#AC_FC_FREEFORM
+#AC_FC_DUMMY_MAIN
+#AC_LANG_POP(Fortran)
+AC_PROG_CC
+AC_PROG_CXX
+AM_PROG_LIBTOOL
+AC_HEADER_STDC
+AC_FUNC_UTIME_NULL
+AC_CONFIG_MACRO_DIR([m4])
+## Set Fortran compiler behaviour
+#if test "x$FCFLAGS" == "x"; then
+# FCFLAGS="-O2"
+#fi
+## Try to respect users' Fortran compiler variables
+#if test "x$FC" == "x"; then
+# if test "x$F77" == "x"; then
+#FC="$GFORTRAN"
+#FC=gfortran
+# else
+# FC="$F77"
+# fi
+#fi
+
+# Require full C++11 functionality, which has been supported by gcc since version 4.8.1
+# If the following macro is not found, you might want to install the autoconf-archive
+# package and repeat the 'autoreconf -i' step.
+AX_CXX_COMPILE_STDCXX_11
+
+CERNROOT_LDFLAGS=
+ROOT_LDFLAGS=
+ROOT_CFLAGS=
+ROOT_LIBS=
+AH_TEMPLATE([HAVE_CERNROOT],[Define 1 if the cern root package is installed])
+AC_PATH_PROG(ROOTPATH,root,no)
+if test "$ROOTPATH" = "no"; then
+ AC_MSG_WARN([****************************************************])
+ AC_MSG_WARN([])
+ AC_MSG_WARN([root was not found - needed for applgrid storage])
+ AC_MSG_WARN([])
+ AC_MSG_WARN([****************************************************])
+else
+ CERNROOT_LDFLAGS=$(root-config --nonew --ldflags --libs)
+ ROOT_LDFLAGS=$(root-config --ldflags)
+ ROOT_CFLAGS=$(root-config --cflags)
+ ROOT_LIBS=$(root-config --nonew --libs)
+ AC_DEFINE_UNQUOTED(HAVE_CERNROOT,1,[Define 1 if root is installed])
+fi
+
+APPLGRID_LDFLAGS=
+APPLGRID_CXXFLAGS=
+AH_TEMPLATE([HAVE_APPL],[Define 1 if the applgrid library is installed])
+AC_PATH_PROG(APPLPATH,applgrid-config,no)
+if test "$APPLPATH" = "no"; then
+ AC_MSG_WARN([****************************************************************************])
+ AC_MSG_WARN([])
+ AC_MSG_WARN([ APPLgrid was not found - you will not be able to create applgrid grids ! ])
+ AC_MSG_WARN([])
+ AC_MSG_WARN([****************************************************************************])
+# Even if installed, use ROOT only if APPLgrid present
+ CERNROOT_LDFLAGS=
+ ROOT_LDFLAGS=
+ ROOT_CFLAGS=
+ ROOT_LIBS=
+ AC_DEFINE_UNQUOTED(HAVE_CERNROOT,0,[Define 1 if root is installed])
+else
+ APPLGRID_LDFLAGS=$(applgrid-config --ldflags)
+ APPLGRID_CXXFLAGS=$(applgrid-config --cxxflags)
+ AC_DEFINE_UNQUOTED(HAVE_APPL,1,[Define 1 if applgrid is installed])
+fi
+
+AC_SUBST(CERNROOT_LDFLAGS)
+AC_SUBST(ROOT_LDFLAGS)
+AC_SUBST(ROOT_CFLAGS)
+AC_SUBST(ROOT_LIBS)
+AM_CONDITIONAL(USE_CERNROOT, [test "$ROOTPATH" != "no"] )
+
+AC_SUBST(APPLGRID_LDFLAGS)
+AC_SUBST(APPLGRID_CXXFLAGS)
+AM_CONDITIONAL(USE_APPLGRID, [test "$APPLPATH" != "no"] )
+
+
+FASTNLO_LDFLAGS=
+FASTNLO_CXXFLAGS=
+AH_TEMPLATE([HAVE_FASTNLO],[Define 1 if the fastnlo library is installed])
+AC_PATH_PROG(FASTNLOPATH,fnlo-tk-config,no)
+if test "$FASTNLOPATH" = "no"; then
+ AC_MSG_WARN([**************************************************************************])
+ AC_MSG_WARN([])
+ AC_MSG_WARN([ fastNLO was not found - you will not be able to create fastNLO grids ! ])
+ AC_MSG_WARN([])
+ AC_MSG_WARN([**************************************************************************])
+else
+ FASTNLO_LDFLAGS=$(fnlo-tk-config --ldflags)
+ FASTNLO_CXXFLAGS=$(fnlo-tk-config --cppflags)
+ AC_DEFINE_UNQUOTED(HAVE_FASTNLO,1,[Define 1 if fastnlo is installed])
+fi
+
+AC_SUBST(FASTNLO_LDFLAGS)
+AC_SUBST(FASTNLO_CXXFLAGS)
+AM_CONDITIONAL(USE_FASTNLO, [test "$FASTNLOPATH" != "no"] )
+
+
+AC_CONFIG_FILES([bin/Makefile bin/nnlo-config])
+
+
+AC_OUTPUT(Makefile src/Makefile)
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/INSTALL
===================================================================
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/bin/nnlo-config.in
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/bin/nnlo-config.in (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/bin/nnlo-config.in (revision 1772)
@@ -0,0 +1,46 @@
+#! /usr/bin/env bash
+
+# These variables need to exist
+prefix=@prefix@
+
+if [[ $# -eq 0 || -n $( echo $* | egrep -- "--help|-h" ) ]]; then
+ echo "nnlo-config: configuration tool for the grid - nnlo code bridge"
+ echo " http://projects.hepforge.org/applgrid/"
+ echo
+ echo "Usage: nnlojet-config [[--help|-h] | [--prefix] | [...]]"
+ echo "Options:"
+ echo " --help | -h : this help"
+ echo
+ echo " --prefix : installation prefix (cf. autoconf)"
+ echo " --incdir : path to the bridge header directory"
+ echo " --libdir : path to the bridge library directory"
+ echo " --cxxflags : compiler flags for the C preprocessor"
+ echo " --ldflags : compiler flags for the linker for NLO"
+ echo " --ldpsflags : compiler flags for the linker for NLO with parton shower"
+ echo
+ echo " --version : release version number"
+fi
+
+OUT=""
+
+tmp=$( echo "$*" | egrep -- '--\<prefix\>')
+test -n "$tmp" && OUT="$OUT @prefix@"
+
+tmp=$( echo "$*" | egrep -- '--\<incdir\>')
+test -n "$tmp" && OUT="$OUT @includedir@"
+
+tmp=$( echo "$*" | egrep -- '--\<cxxflags\>')
+test -n "$tmp" && OUT="$OUT -I@includedir@"
+
+tmp=$( echo "$*" | egrep -- '--\<libdir\>')
+test -n "$tmp" && OUT="$OUT @exec_prefix@@libdir@"
+
+symbol=$( nm @exec_prefix@@libdir@/libnnlo.a | sed -n 's/.* T \(.*setup_nnlo\)/\1/p' | head -1 )
+tmp=$( echo "$*" | egrep -- '--\<ldflags\>')
+test -n "$tmp" && OUT="$OUT -u $symbol -L@exec_prefix@@libdir@ -lnnlo @APPLGRID_LDFLAGS@ @FASTNLO_LDFLAGS@ @CERNROOT_LDFLAGS@ "
+
+## Version
+tmp=$( echo "$*" | egrep -- '--\<version\>')
+test -n "$tmp" && OUT="$OUT @PACKAGE_VERSION@"
+
+echo $OUT
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/bin/Makefile.in
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/bin/Makefile.in (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/bin/Makefile.in (revision 1772)
@@ -0,0 +1,520 @@
+# Makefile.in generated by automake 1.15 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2014 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+VPATH = @srcdir@
+am__is_gnu_make = { \
+ if test -z '$(MAKELEVEL)'; then \
+ false; \
+ elif test -n '$(MAKE_HOST)'; then \
+ true; \
+ elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+ true; \
+ else \
+ false; \
+ fi; \
+}
+am__make_running_with_option = \
+ case $${target_option-} in \
+ ?) ;; \
+ *) echo "am__make_running_with_option: internal error: invalid" \
+ "target option '$${target_option-}' specified" >&2; \
+ exit 1;; \
+ esac; \
+ has_opt=no; \
+ sane_makeflags=$$MAKEFLAGS; \
+ if $(am__is_gnu_make); then \
+ sane_makeflags=$$MFLAGS; \
+ else \
+ case $$MAKEFLAGS in \
+ *\\[\ \ ]*) \
+ bs=\\; \
+ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
+ esac; \
+ fi; \
+ skip_next=no; \
+ strip_trailopt () \
+ { \
+ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+ }; \
+ for flg in $$sane_makeflags; do \
+ test $$skip_next = yes && { skip_next=no; continue; }; \
+ case $$flg in \
+ *=*|--*) continue;; \
+ -*I) strip_trailopt 'I'; skip_next=yes;; \
+ -*I?*) strip_trailopt 'I';; \
+ -*O) strip_trailopt 'O'; skip_next=yes;; \
+ -*O?*) strip_trailopt 'O';; \
+ -*l) strip_trailopt 'l'; skip_next=yes;; \
+ -*l?*) strip_trailopt 'l';; \
+ -[dEDm]) skip_next=yes;; \
+ -[JT]) skip_next=yes;; \
+ esac; \
+ case $$flg in \
+ *$$target_option*) has_opt=yes; break;; \
+ esac; \
+ done; \
+ test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+subdir = bin
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/amconfig.h
+CONFIG_CLEAN_FILES = nnlo-config
+CONFIG_CLEAN_VPATH_FILES =
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+ *) f=$$p;; \
+ esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+ for p in $$list; do echo "$$p $$p"; done | \
+ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+ if (++n[$$2] == $(am__install_max)) \
+ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+ END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+ test -z "$$files" \
+ || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+ || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+ $(am__cd) "$$dir" && rm -f $$files; }; \
+ }
+am__installdirs = "$(DESTDIR)$(bindir)"
+SCRIPTS = $(bin_SCRIPTS)
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo " GEN " $@;
+am__v_GEN_1 =
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 =
+SOURCES =
+DIST_SOURCES =
+am__can_run_installinfo = \
+ case $$AM_UPDATE_INFO_DIR in \
+ n|no|NO) false;; \
+ *) (install-info --version) >/dev/null 2>&1;; \
+ esac
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/nnlo-config.in
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+APPLGRID_CXXFLAGS = @APPLGRID_CXXFLAGS@
+APPLGRID_LDFLAGS = @APPLGRID_LDFLAGS@
+APPLPATH = @APPLPATH@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CERNROOT_LDFLAGS = @CERNROOT_LDFLAGS@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+CXXDEPMODE = @CXXDEPMODE@
+CXXFLAGS = @CXXFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+FASTNLOPATH = @FASTNLOPATH@
+FASTNLO_CXXFLAGS = @FASTNLO_CXXFLAGS@
+FASTNLO_LDFLAGS = @FASTNLO_LDFLAGS@
+FGREP = @FGREP@
+GREP = @GREP@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
+MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
+MKDIR_P = @MKDIR_P@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+RANLIB = @RANLIB@
+ROOTPATH = @ROOTPATH@
+ROOT_CFLAGS = @ROOT_CFLAGS@
+ROOT_LDFLAGS = @ROOT_LDFLAGS@
+ROOT_LIBS = @ROOT_LIBS@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+VERSION = @VERSION@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_CXX = @ac_ct_CXX@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+EXTRA_DIST = nnlo-config.in
+bin_SCRIPTS = nnlo-config
+all: all-am
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+ && { if test -f $@; then exit 0; else break; fi; }; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu bin/Makefile'; \
+ $(am__cd) $(top_srcdir) && \
+ $(AUTOMAKE) --gnu bin/Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+nnlo-config: $(top_builddir)/config.status $(srcdir)/nnlo-config.in
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
+install-binSCRIPTS: $(bin_SCRIPTS)
+ @$(NORMAL_INSTALL)
+ @list='$(bin_SCRIPTS)'; test -n "$(bindir)" || list=; \
+ if test -n "$$list"; then \
+ echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
+ fi; \
+ for p in $$list; do \
+ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+ if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
+ done | \
+ sed -e 'p;s,.*/,,;n' \
+ -e 'h;s|.*|.|' \
+ -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
+ $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
+ { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+ if ($$2 == $$4) { files[d] = files[d] " " $$1; \
+ if (++n[d] == $(am__install_max)) { \
+ print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
+ else { print "f", d "/" $$4, $$1 } } \
+ END { for (d in files) print "f", d, files[d] }' | \
+ while read type dir files; do \
+ if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+ test -z "$$files" || { \
+ echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(bindir)$$dir'"; \
+ $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
+ } \
+ ; done
+
+uninstall-binSCRIPTS:
+ @$(NORMAL_UNINSTALL)
+ @list='$(bin_SCRIPTS)'; test -n "$(bindir)" || exit 0; \
+ files=`for p in $$list; do echo "$$p"; done | \
+ sed -e 's,.*/,,;$(transform)'`; \
+ dir='$(DESTDIR)$(bindir)'; $(am__uninstall_files_from_dir)
+
+mostlyclean-libtool:
+ -rm -f *.lo
+
+clean-libtool:
+ -rm -rf .libs _libs
+tags TAGS:
+
+ctags CTAGS:
+
+cscope cscopelist:
+
+
+distdir: $(DISTFILES)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ list='$(DISTFILES)'; \
+ dist_files=`for file in $$list; do echo $$file; done | \
+ sed -e "s|^$$srcdirstrip/||;t" \
+ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+ case $$dist_files in \
+ */*) $(MKDIR_P) `echo "$$dist_files" | \
+ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+ sort -u` ;; \
+ esac; \
+ for file in $$dist_files; do \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ if test -d $$d/$$file; then \
+ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test -d "$(distdir)/$$file"; then \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+ else \
+ test -f "$(distdir)/$$file" \
+ || cp -p $$d/$$file "$(distdir)/$$file" \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+check: check-am
+all-am: Makefile $(SCRIPTS)
+installdirs:
+ for dir in "$(DESTDIR)$(bindir)"; do \
+ test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+ done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+ if test -z '$(STRIP)'; then \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ install; \
+ else \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+ fi
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-am
+ -rm -f Makefile
+distclean-am: clean-am distclean-generic
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am: install-binSCRIPTS
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-binSCRIPTS
+
+.MAKE: install-am install-strip
+
+.PHONY: all all-am check check-am clean clean-generic clean-libtool \
+ cscopelist-am ctags-am distclean distclean-generic \
+ distclean-libtool distdir dvi dvi-am html html-am info info-am \
+ install install-am install-binSCRIPTS install-data \
+ install-data-am install-dvi install-dvi-am install-exec \
+ install-exec-am install-html install-html-am install-info \
+ install-info-am install-man install-pdf install-pdf-am \
+ install-ps install-ps-am install-strip installcheck \
+ installcheck-am installdirs maintainer-clean \
+ maintainer-clean-generic mostlyclean mostlyclean-generic \
+ mostlyclean-libtool pdf pdf-am ps ps-am tags-am uninstall \
+ uninstall-am uninstall-binSCRIPTS
+
+.PRECIOUS: Makefile
+
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/bin/Makefile.am
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/bin/Makefile.am (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/bin/Makefile.am (revision 1772)
@@ -0,0 +1,2 @@
+EXTRA_DIST = nnlo-config.in
+bin_SCRIPTS = nnlo-config
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/COPYING
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/COPYING (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/COPYING (revision 1772)
@@ -0,0 +1,674 @@
+ GNU GENERAL PUBLIC LICENSE
+ Version 3, 29 June 2007
+
+ Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/>
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+ Preamble
+
+ The GNU General Public License is a free, copyleft license for
+software and other kinds of works.
+
+ The licenses for most software and other practical works are designed
+to take away your freedom to share and change the works. By contrast,
+the GNU General Public License is intended to guarantee your freedom to
+share and change all versions of a program--to make sure it remains free
+software for all its users. We, the Free Software Foundation, use the
+GNU General Public License for most of our software; it applies also to
+any other work released this way by its authors. You can apply it to
+your programs, too.
+
+ When we speak of free software, we are referring to freedom, not
+price. Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+them if you wish), that you receive source code or can get it if you
+want it, that you can change the software or use pieces of it in new
+free programs, and that you know you can do these things.
+
+ To protect your rights, we need to prevent others from denying you
+these rights or asking you to surrender the rights. Therefore, you have
+certain responsibilities if you distribute copies of the software, or if
+you modify it: responsibilities to respect the freedom of others.
+
+ For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must pass on to the recipients the same
+freedoms that you received. You must make sure that they, too, receive
+or can get the source code. And you must show them these terms so they
+know their rights.
+
+ Developers that use the GNU GPL protect your rights with two steps:
+(1) assert copyright on the software, and (2) offer you this License
+giving you legal permission to copy, distribute and/or modify it.
+
+ For the developers' and authors' protection, the GPL clearly explains
+that there is no warranty for this free software. For both users' and
+authors' sake, the GPL requires that modified versions be marked as
+changed, so that their problems will not be attributed erroneously to
+authors of previous versions.
+
+ Some devices are designed to deny users access to install or run
+modified versions of the software inside them, although the manufacturer
+can do so. This is fundamentally incompatible with the aim of
+protecting users' freedom to change the software. The systematic
+pattern of such abuse occurs in the area of products for individuals to
+use, which is precisely where it is most unacceptable. Therefore, we
+have designed this version of the GPL to prohibit the practice for those
+products. If such problems arise substantially in other domains, we
+stand ready to extend this provision to those domains in future versions
+of the GPL, as needed to protect the freedom of users.
+
+ Finally, every program is threatened constantly by software patents.
+States should not allow patents to restrict development and use of
+software on general-purpose computers, but in those that do, we wish to
+avoid the special danger that patents applied to a free program could
+make it effectively proprietary. To prevent this, the GPL assures that
+patents cannot be used to render the program non-free.
+
+ The precise terms and conditions for copying, distribution and
+modification follow.
+
+ TERMS AND CONDITIONS
+
+ 0. Definitions.
+
+ "This License" refers to version 3 of the GNU General Public License.
+
+ "Copyright" also means copyright-like laws that apply to other kinds of
+works, such as semiconductor masks.
+
+ "The Program" refers to any copyrightable work licensed under this
+License. Each licensee is addressed as "you". "Licensees" and
+"recipients" may be individuals or organizations.
+
+ To "modify" a work means to copy from or adapt all or part of the work
+in a fashion requiring copyright permission, other than the making of an
+exact copy. The resulting work is called a "modified version" of the
+earlier work or a work "based on" the earlier work.
+
+ A "covered work" means either the unmodified Program or a work based
+on the Program.
+
+ To "propagate" a work means to do anything with it that, without
+permission, would make you directly or secondarily liable for
+infringement under applicable copyright law, except executing it on a
+computer or modifying a private copy. Propagation includes copying,
+distribution (with or without modification), making available to the
+public, and in some countries other activities as well.
+
+ To "convey" a work means any kind of propagation that enables other
+parties to make or receive copies. Mere interaction with a user through
+a computer network, with no transfer of a copy, is not conveying.
+
+ An interactive user interface displays "Appropriate Legal Notices"
+to the extent that it includes a convenient and prominently visible
+feature that (1) displays an appropriate copyright notice, and (2)
+tells the user that there is no warranty for the work (except to the
+extent that warranties are provided), that licensees may convey the
+work under this License, and how to view a copy of this License. If
+the interface presents a list of user commands or options, such as a
+menu, a prominent item in the list meets this criterion.
+
+ 1. Source Code.
+
+ The "source code" for a work means the preferred form of the work
+for making modifications to it. "Object code" means any non-source
+form of a work.
+
+ A "Standard Interface" means an interface that either is an official
+standard defined by a recognized standards body, or, in the case of
+interfaces specified for a particular programming language, one that
+is widely used among developers working in that language.
+
+ The "System Libraries" of an executable work include anything, other
+than the work as a whole, that (a) is included in the normal form of
+packaging a Major Component, but which is not part of that Major
+Component, and (b) serves only to enable use of the work with that
+Major Component, or to implement a Standard Interface for which an
+implementation is available to the public in source code form. A
+"Major Component", in this context, means a major essential component
+(kernel, window system, and so on) of the specific operating system
+(if any) on which the executable work runs, or a compiler used to
+produce the work, or an object code interpreter used to run it.
+
+ The "Corresponding Source" for a work in object code form means all
+the source code needed to generate, install, and (for an executable
+work) run the object code and to modify the work, including scripts to
+control those activities. However, it does not include the work's
+System Libraries, or general-purpose tools or generally available free
+programs which are used unmodified in performing those activities but
+which are not part of the work. For example, Corresponding Source
+includes interface definition files associated with source files for
+the work, and the source code for shared libraries and dynamically
+linked subprograms that the work is specifically designed to require,
+such as by intimate data communication or control flow between those
+subprograms and other parts of the work.
+
+ The Corresponding Source need not include anything that users
+can regenerate automatically from other parts of the Corresponding
+Source.
+
+ The Corresponding Source for a work in source code form is that
+same work.
+
+ 2. Basic Permissions.
+
+ All rights granted under this License are granted for the term of
+copyright on the Program, and are irrevocable provided the stated
+conditions are met. This License explicitly affirms your unlimited
+permission to run the unmodified Program. The output from running a
+covered work is covered by this License only if the output, given its
+content, constitutes a covered work. This License acknowledges your
+rights of fair use or other equivalent, as provided by copyright law.
+
+ You may make, run and propagate covered works that you do not
+convey, without conditions so long as your license otherwise remains
+in force. You may convey covered works to others for the sole purpose
+of having them make modifications exclusively for you, or provide you
+with facilities for running those works, provided that you comply with
+the terms of this License in conveying all material for which you do
+not control copyright. Those thus making or running the covered works
+for you must do so exclusively on your behalf, under your direction
+and control, on terms that prohibit them from making any copies of
+your copyrighted material outside their relationship with you.
+
+ Conveying under any other circumstances is permitted solely under
+the conditions stated below. Sublicensing is not allowed; section 10
+makes it unnecessary.
+
+ 3. Protecting Users' Legal Rights From Anti-Circumvention Law.
+
+ No covered work shall be deemed part of an effective technological
+measure under any applicable law fulfilling obligations under article
+11 of the WIPO copyright treaty adopted on 20 December 1996, or
+similar laws prohibiting or restricting circumvention of such
+measures.
+
+ When you convey a covered work, you waive any legal power to forbid
+circumvention of technological measures to the extent such circumvention
+is effected by exercising rights under this License with respect to
+the covered work, and you disclaim any intention to limit operation or
+modification of the work as a means of enforcing, against the work's
+users, your or third parties' legal rights to forbid circumvention of
+technological measures.
+
+ 4. Conveying Verbatim Copies.
+
+ You may convey verbatim copies of the Program's source code as you
+receive it, in any medium, provided that you conspicuously and
+appropriately publish on each copy an appropriate copyright notice;
+keep intact all notices stating that this License and any
+non-permissive terms added in accord with section 7 apply to the code;
+keep intact all notices of the absence of any warranty; and give all
+recipients a copy of this License along with the Program.
+
+ You may charge any price or no price for each copy that you convey,
+and you may offer support or warranty protection for a fee.
+
+ 5. Conveying Modified Source Versions.
+
+ You may convey a work based on the Program, or the modifications to
+produce it from the Program, in the form of source code under the
+terms of section 4, provided that you also meet all of these conditions:
+
+ a) The work must carry prominent notices stating that you modified
+ it, and giving a relevant date.
+
+ b) The work must carry prominent notices stating that it is
+ released under this License and any conditions added under section
+ 7. This requirement modifies the requirement in section 4 to
+ "keep intact all notices".
+
+ c) You must license the entire work, as a whole, under this
+ License to anyone who comes into possession of a copy. This
+ License will therefore apply, along with any applicable section 7
+ additional terms, to the whole of the work, and all its parts,
+ regardless of how they are packaged. This License gives no
+ permission to license the work in any other way, but it does not
+ invalidate such permission if you have separately received it.
+
+ d) If the work has interactive user interfaces, each must display
+ Appropriate Legal Notices; however, if the Program has interactive
+ interfaces that do not display Appropriate Legal Notices, your
+ work need not make them do so.
+
+ A compilation of a covered work with other separate and independent
+works, which are not by their nature extensions of the covered work,
+and which are not combined with it such as to form a larger program,
+in or on a volume of a storage or distribution medium, is called an
+"aggregate" if the compilation and its resulting copyright are not
+used to limit the access or legal rights of the compilation's users
+beyond what the individual works permit. Inclusion of a covered work
+in an aggregate does not cause this License to apply to the other
+parts of the aggregate.
+
+ 6. Conveying Non-Source Forms.
+
+ You may convey a covered work in object code form under the terms
+of sections 4 and 5, provided that you also convey the
+machine-readable Corresponding Source under the terms of this License,
+in one of these ways:
+
+ a) Convey the object code in, or embodied in, a physical product
+ (including a physical distribution medium), accompanied by the
+ Corresponding Source fixed on a durable physical medium
+ customarily used for software interchange.
+
+ b) Convey the object code in, or embodied in, a physical product
+ (including a physical distribution medium), accompanied by a
+ written offer, valid for at least three years and valid for as
+ long as you offer spare parts or customer support for that product
+ model, to give anyone who possesses the object code either (1) a
+ copy of the Corresponding Source for all the software in the
+ product that is covered by this License, on a durable physical
+ medium customarily used for software interchange, for a price no
+ more than your reasonable cost of physically performing this
+ conveying of source, or (2) access to copy the
+ Corresponding Source from a network server at no charge.
+
+ c) Convey individual copies of the object code with a copy of the
+ written offer to provide the Corresponding Source. This
+ alternative is allowed only occasionally and noncommercially, and
+ only if you received the object code with such an offer, in accord
+ with subsection 6b.
+
+ d) Convey the object code by offering access from a designated
+ place (gratis or for a charge), and offer equivalent access to the
+ Corresponding Source in the same way through the same place at no
+ further charge. You need not require recipients to copy the
+ Corresponding Source along with the object code. If the place to
+ copy the object code is a network server, the Corresponding Source
+ may be on a different server (operated by you or a third party)
+ that supports equivalent copying facilities, provided you maintain
+ clear directions next to the object code saying where to find the
+ Corresponding Source. Regardless of what server hosts the
+ Corresponding Source, you remain obligated to ensure that it is
+ available for as long as needed to satisfy these requirements.
+
+ e) Convey the object code using peer-to-peer transmission, provided
+ you inform other peers where the object code and Corresponding
+ Source of the work are being offered to the general public at no
+ charge under subsection 6d.
+
+ A separable portion of the object code, whose source code is excluded
+from the Corresponding Source as a System Library, need not be
+included in conveying the object code work.
+
+ A "User Product" is either (1) a "consumer product", which means any
+tangible personal property which is normally used for personal, family,
+or household purposes, or (2) anything designed or sold for incorporation
+into a dwelling. In determining whether a product is a consumer product,
+doubtful cases shall be resolved in favor of coverage. For a particular
+product received by a particular user, "normally used" refers to a
+typical or common use of that class of product, regardless of the status
+of the particular user or of the way in which the particular user
+actually uses, or expects or is expected to use, the product. A product
+is a consumer product regardless of whether the product has substantial
+commercial, industrial or non-consumer uses, unless such uses represent
+the only significant mode of use of the product.
+
+ "Installation Information" for a User Product means any methods,
+procedures, authorization keys, or other information required to install
+and execute modified versions of a covered work in that User Product from
+a modified version of its Corresponding Source. The information must
+suffice to ensure that the continued functioning of the modified object
+code is in no case prevented or interfered with solely because
+modification has been made.
+
+ If you convey an object code work under this section in, or with, or
+specifically for use in, a User Product, and the conveying occurs as
+part of a transaction in which the right of possession and use of the
+User Product is transferred to the recipient in perpetuity or for a
+fixed term (regardless of how the transaction is characterized), the
+Corresponding Source conveyed under this section must be accompanied
+by the Installation Information. But this requirement does not apply
+if neither you nor any third party retains the ability to install
+modified object code on the User Product (for example, the work has
+been installed in ROM).
+
+ The requirement to provide Installation Information does not include a
+requirement to continue to provide support service, warranty, or updates
+for a work that has been modified or installed by the recipient, or for
+the User Product in which it has been modified or installed. Access to a
+network may be denied when the modification itself materially and
+adversely affects the operation of the network or violates the rules and
+protocols for communication across the network.
+
+ Corresponding Source conveyed, and Installation Information provided,
+in accord with this section must be in a format that is publicly
+documented (and with an implementation available to the public in
+source code form), and must require no special password or key for
+unpacking, reading or copying.
+
+ 7. Additional Terms.
+
+ "Additional permissions" are terms that supplement the terms of this
+License by making exceptions from one or more of its conditions.
+Additional permissions that are applicable to the entire Program shall
+be treated as though they were included in this License, to the extent
+that they are valid under applicable law. If additional permissions
+apply only to part of the Program, that part may be used separately
+under those permissions, but the entire Program remains governed by
+this License without regard to the additional permissions.
+
+ When you convey a copy of a covered work, you may at your option
+remove any additional permissions from that copy, or from any part of
+it. (Additional permissions may be written to require their own
+removal in certain cases when you modify the work.) You may place
+additional permissions on material, added by you to a covered work,
+for which you have or can give appropriate copyright permission.
+
+ Notwithstanding any other provision of this License, for material you
+add to a covered work, you may (if authorized by the copyright holders of
+that material) supplement the terms of this License with terms:
+
+ a) Disclaiming warranty or limiting liability differently from the
+ terms of sections 15 and 16 of this License; or
+
+ b) Requiring preservation of specified reasonable legal notices or
+ author attributions in that material or in the Appropriate Legal
+ Notices displayed by works containing it; or
+
+ c) Prohibiting misrepresentation of the origin of that material, or
+ requiring that modified versions of such material be marked in
+ reasonable ways as different from the original version; or
+
+ d) Limiting the use for publicity purposes of names of licensors or
+ authors of the material; or
+
+ e) Declining to grant rights under trademark law for use of some
+ trade names, trademarks, or service marks; or
+
+ f) Requiring indemnification of licensors and authors of that
+ material by anyone who conveys the material (or modified versions of
+ it) with contractual assumptions of liability to the recipient, for
+ any liability that these contractual assumptions directly impose on
+ those licensors and authors.
+
+ All other non-permissive additional terms are considered "further
+restrictions" within the meaning of section 10. If the Program as you
+received it, or any part of it, contains a notice stating that it is
+governed by this License along with a term that is a further
+restriction, you may remove that term. If a license document contains
+a further restriction but permits relicensing or conveying under this
+License, you may add to a covered work material governed by the terms
+of that license document, provided that the further restriction does
+not survive such relicensing or conveying.
+
+ If you add terms to a covered work in accord with this section, you
+must place, in the relevant source files, a statement of the
+additional terms that apply to those files, or a notice indicating
+where to find the applicable terms.
+
+ Additional terms, permissive or non-permissive, may be stated in the
+form of a separately written license, or stated as exceptions;
+the above requirements apply either way.
+
+ 8. Termination.
+
+ You may not propagate or modify a covered work except as expressly
+provided under this License. Any attempt otherwise to propagate or
+modify it is void, and will automatically terminate your rights under
+this License (including any patent licenses granted under the third
+paragraph of section 11).
+
+ However, if you cease all violation of this License, then your
+license from a particular copyright holder is reinstated (a)
+provisionally, unless and until the copyright holder explicitly and
+finally terminates your license, and (b) permanently, if the copyright
+holder fails to notify you of the violation by some reasonable means
+prior to 60 days after the cessation.
+
+ Moreover, your license from a particular copyright holder is
+reinstated permanently if the copyright holder notifies you of the
+violation by some reasonable means, this is the first time you have
+received notice of violation of this License (for any work) from that
+copyright holder, and you cure the violation prior to 30 days after
+your receipt of the notice.
+
+ Termination of your rights under this section does not terminate the
+licenses of parties who have received copies or rights from you under
+this License. If your rights have been terminated and not permanently
+reinstated, you do not qualify to receive new licenses for the same
+material under section 10.
+
+ 9. Acceptance Not Required for Having Copies.
+
+ You are not required to accept this License in order to receive or
+run a copy of the Program. Ancillary propagation of a covered work
+occurring solely as a consequence of using peer-to-peer transmission
+to receive a copy likewise does not require acceptance. However,
+nothing other than this License grants you permission to propagate or
+modify any covered work. These actions infringe copyright if you do
+not accept this License. Therefore, by modifying or propagating a
+covered work, you indicate your acceptance of this License to do so.
+
+ 10. Automatic Licensing of Downstream Recipients.
+
+ Each time you convey a covered work, the recipient automatically
+receives a license from the original licensors, to run, modify and
+propagate that work, subject to this License. You are not responsible
+for enforcing compliance by third parties with this License.
+
+ An "entity transaction" is a transaction transferring control of an
+organization, or substantially all assets of one, or subdividing an
+organization, or merging organizations. If propagation of a covered
+work results from an entity transaction, each party to that
+transaction who receives a copy of the work also receives whatever
+licenses to the work the party's predecessor in interest had or could
+give under the previous paragraph, plus a right to possession of the
+Corresponding Source of the work from the predecessor in interest, if
+the predecessor has it or can get it with reasonable efforts.
+
+ You may not impose any further restrictions on the exercise of the
+rights granted or affirmed under this License. For example, you may
+not impose a license fee, royalty, or other charge for exercise of
+rights granted under this License, and you may not initiate litigation
+(including a cross-claim or counterclaim in a lawsuit) alleging that
+any patent claim is infringed by making, using, selling, offering for
+sale, or importing the Program or any portion of it.
+
+ 11. Patents.
+
+ A "contributor" is a copyright holder who authorizes use under this
+License of the Program or a work on which the Program is based. The
+work thus licensed is called the contributor's "contributor version".
+
+ A contributor's "essential patent claims" are all patent claims
+owned or controlled by the contributor, whether already acquired or
+hereafter acquired, that would be infringed by some manner, permitted
+by this License, of making, using, or selling its contributor version,
+but do not include claims that would be infringed only as a
+consequence of further modification of the contributor version. For
+purposes of this definition, "control" includes the right to grant
+patent sublicenses in a manner consistent with the requirements of
+this License.
+
+ Each contributor grants you a non-exclusive, worldwide, royalty-free
+patent license under the contributor's essential patent claims, to
+make, use, sell, offer for sale, import and otherwise run, modify and
+propagate the contents of its contributor version.
+
+ In the following three paragraphs, a "patent license" is any express
+agreement or commitment, however denominated, not to enforce a patent
+(such as an express permission to practice a patent or covenant not to
+sue for patent infringement). To "grant" such a patent license to a
+party means to make such an agreement or commitment not to enforce a
+patent against the party.
+
+ If you convey a covered work, knowingly relying on a patent license,
+and the Corresponding Source of the work is not available for anyone
+to copy, free of charge and under the terms of this License, through a
+publicly available network server or other readily accessible means,
+then you must either (1) cause the Corresponding Source to be so
+available, or (2) arrange to deprive yourself of the benefit of the
+patent license for this particular work, or (3) arrange, in a manner
+consistent with the requirements of this License, to extend the patent
+license to downstream recipients. "Knowingly relying" means you have
+actual knowledge that, but for the patent license, your conveying the
+covered work in a country, or your recipient's use of the covered work
+in a country, would infringe one or more identifiable patents in that
+country that you have reason to believe are valid.
+
+ If, pursuant to or in connection with a single transaction or
+arrangement, you convey, or propagate by procuring conveyance of, a
+covered work, and grant a patent license to some of the parties
+receiving the covered work authorizing them to use, propagate, modify
+or convey a specific copy of the covered work, then the patent license
+you grant is automatically extended to all recipients of the covered
+work and works based on it.
+
+ A patent license is "discriminatory" if it does not include within
+the scope of its coverage, prohibits the exercise of, or is
+conditioned on the non-exercise of one or more of the rights that are
+specifically granted under this License. You may not convey a covered
+work if you are a party to an arrangement with a third party that is
+in the business of distributing software, under which you make payment
+to the third party based on the extent of your activity of conveying
+the work, and under which the third party grants, to any of the
+parties who would receive the covered work from you, a discriminatory
+patent license (a) in connection with copies of the covered work
+conveyed by you (or copies made from those copies), or (b) primarily
+for and in connection with specific products or compilations that
+contain the covered work, unless you entered into that arrangement,
+or that patent license was granted, prior to 28 March 2007.
+
+ Nothing in this License shall be construed as excluding or limiting
+any implied license or other defenses to infringement that may
+otherwise be available to you under applicable patent law.
+
+ 12. No Surrender of Others' Freedom.
+
+ If conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License. If you cannot convey a
+covered work so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you may
+not convey it at all. For example, if you agree to terms that obligate you
+to collect a royalty for further conveying from those to whom you convey
+the Program, the only way you could satisfy both those terms and this
+License would be to refrain entirely from conveying the Program.
+
+ 13. Use with the GNU Affero General Public License.
+
+ Notwithstanding any other provision of this License, you have
+permission to link or combine any covered work with a work licensed
+under version 3 of the GNU Affero General Public License into a single
+combined work, and to convey the resulting work. The terms of this
+License will continue to apply to the part which is the covered work,
+but the special requirements of the GNU Affero General Public License,
+section 13, concerning interaction through a network will apply to the
+combination as such.
+
+ 14. Revised Versions of this License.
+
+ The Free Software Foundation may publish revised and/or new versions of
+the GNU General Public License from time to time. Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+ Each version is given a distinguishing version number. If the
+Program specifies that a certain numbered version of the GNU General
+Public License "or any later version" applies to it, you have the
+option of following the terms and conditions either of that numbered
+version or of any later version published by the Free Software
+Foundation. If the Program does not specify a version number of the
+GNU General Public License, you may choose any version ever published
+by the Free Software Foundation.
+
+ If the Program specifies that a proxy can decide which future
+versions of the GNU General Public License can be used, that proxy's
+public statement of acceptance of a version permanently authorizes you
+to choose that version for the Program.
+
+ Later license versions may give you additional or different
+permissions. However, no additional obligations are imposed on any
+author or copyright holder as a result of your choosing to follow a
+later version.
+
+ 15. Disclaimer of Warranty.
+
+ THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY
+APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
+HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY
+OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
+THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM
+IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF
+ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
+
+ 16. Limitation of Liability.
+
+ IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS
+THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY
+GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE
+USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF
+DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD
+PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS),
+EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF
+SUCH DAMAGES.
+
+ 17. Interpretation of Sections 15 and 16.
+
+ If the disclaimer of warranty and limitation of liability provided
+above cannot be given local legal effect according to their terms,
+reviewing courts shall apply local law that most closely approximates
+an absolute waiver of all civil liability in connection with the
+Program, unless a warranty or assumption of liability accompanies a
+copy of the Program in return for a fee.
+
+ END OF TERMS AND CONDITIONS
+
+ How to Apply These Terms to Your New Programs
+
+ If you develop a new program, and you want it to be of the greatest
+possible use to the public, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these terms.
+
+ To do so, attach the following notices to the program. It is safest
+to attach them to the start of each source file to most effectively
+state the exclusion of warranty; and each file should have at least
+the "copyright" line and a pointer to where the full notice is found.
+
+ <one line to give the program's name and a brief idea of what it does.>
+ Copyright (C) <year> <name of author>
+
+ This program is free software: you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation, either version 3 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+Also add information on how to contact you by electronic and paper mail.
+
+ If the program does terminal interaction, make it output a short
+notice like this when it starts in an interactive mode:
+
+ <program> Copyright (C) <year> <name of author>
+ This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+ This is free software, and you are welcome to redistribute it
+ under certain conditions; type `show c' for details.
+
+The hypothetical commands `show w' and `show c' should show the appropriate
+parts of the General Public License. Of course, your program's commands
+might be different; for a GUI interface, you would use an "about box".
+
+ You should also get your employer (if you work as a programmer) or school,
+if any, to sign a "copyright disclaimer" for the program, if necessary.
+For more information on this, and how to apply and follow the GNU GPL, see
+<http://www.gnu.org/licenses/>.
+
+ The GNU General Public License does not permit incorporating your program
+into proprietary programs. If your program is a subroutine library, you
+may consider it more useful to permit linking proprietary applications with
+the library. If this is what you want to do, use the GNU Lesser General
+Public License instead of this License. But first, please read
+<http://www.gnu.org/philosophy/why-not-lgpl.html>.
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2017_I1487277/fnl3332.1jet.LO-fastprod.conf
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2017_I1487277/fnl3332.1jet.LO-fastprod.conf (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2017_I1487277/fnl3332.1jet.LO-fastprod.conf (revision 1772)
@@ -0,0 +1,21 @@
+[global]
+include = nnlojet-gc.conf
+
+[jobs]
+;jobs = 5 ; Max. # of jobs (truncated to module maximum), D=mod
+;wall time = 2:00 ; Requested wall time in hh[:mm[:ss]] (also used for proxy lifetime)
+
+[parameters] ; This section defines the parameter space
+repeat = 1 ; How many times each parameter space point should be sampled
+parameters = ( SEED , EVENTS )
+SEED = range( 100, 120 )
+SEED type = expr
+EVENTS = 125000000
+
+[UserTask]
+executable = fnlo-run-nnlojet.csh
+arguments = fnl3332 1jet LO fastprod
+subst files = fnl3332.1jet.LO-fastprod.run
+; NNLOJET production run
+input files = fnlo-run-nnlojet.pl fastNLO_v23_source_nnlojet_cvmfs.csh fnl3332.1jet.LO-fastprod.run 1jet.LO-8TeV.y.1e-7.vBa jet.LO-8TeV.ptji_incl_y1.wrm jet.LO-8TeV.ptji_incl_y2.wrm jet.LO-8TeV.ptji_incl_y3.wrm jet.LO-8TeV.ptji_incl_y4.wrm jet.LO-8TeV.ptji_incl_y5.wrm jet.LO-8TeV.ptji_incl_y6.wrm jet.8TeV.ptji_incl_y1.wrm jet.8TeV.ptji_incl_y2.wrm jet.8TeV.ptji_incl_y3.wrm jet.8TeV.ptji_incl_y4.wrm jet.8TeV.ptji_incl_y5.wrm jet.8TeV.ptji_incl_y6.wrm
+output files = fnl3332.1jet.LO-fastprod.tar.gz
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2017_I1487277/fnl3332.1jet.LO-fastwarm.conf
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2017_I1487277/fnl3332.1jet.LO-fastwarm.conf (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2017_I1487277/fnl3332.1jet.LO-fastwarm.conf (revision 1772)
@@ -0,0 +1,21 @@
+[global]
+include = nnlojet-gc.conf
+
+[jobs]
+;jobs = 5 ; Max. # of jobs (truncated to module maximum), D=mod
+;wall time = 0:10 ; Requested wall time in hh[:mm[:ss]] (also used for proxy lifetime)
+
+[parameters] ; This section defines the parameter space
+repeat = 1 ; How many times each parameter space point should be sampled
+parameters = ( SEED , EVENTS )
+SEED = range( 100, 110 )
+SEED type = expr
+EVENTS = 15000000
+
+[UserTask]
+executable = fnlo-run-nnlojet.csh
+arguments = fnl3332 1jet LO fastwarm
+subst files = fnl3332.1jet.LO-fastwarm.run
+; NNLOJET Warm-up run
+input files = fnlo-run-nnlojet.pl fastNLO_v23_source_nnlojet_cvmfs.csh fnl3332.1jet.LO-fastwarm.run 1jet.LO-8TeV.y.1e-7.vBa
+output files = fnl3332.1jet.LO-fastwarm.tar.gz
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2017_I1487277/1jet.V-8TeV.y.1e-7.vBa
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2017_I1487277/1jet.V-8TeV.y.1e-7.vBa (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2017_I1487277/1jet.V-8TeV.y.1e-7.vBa (revision 1772)
@@ -0,0 +1,132 @@
+
+ 13FA259C15BD125013FAE84F97BE3AB1A3FB38BDB78155A173FB7A577232DEBE9
+3FBB52175928E72D3FBECA40EDE152903FC10C0D2760DD9E3FC2A332DCACF14D3FC42E6210638C44
+3FC5B091520623BD3FC72B36C256FA0A3FC8A0161A5C34AD3FCA0FEC232A00833FCB7C8F8C454CAF
+3FCCE6AEB6C9C64A3FCE4EEF0B63FE003FCFB5A4445482093FD08D956ADBEA103FD1401BCBB0DE59
+3FD1F278DD1F352A3FD2A4F25021445F3FD357729DDD81A13FD40A15FCC458F73FD4BCB018214D02
+3FD56F51BC4E513B3FD621DF978A82D03FD6D4733E44FC413FD786EC0C2936343FD83913E2BF40E4
+3FD8EAD2B2855B863FD99BEE69E28A713FDA4C665A029BA13FDAFBD003FF05953FDBAA26272B9F13
+3FDC57283363A0623FDD02D917300B253FDDACDFE03ECE723FDE551E8CE6902F3FDEFB7CF216FACA
+3FDF9FCAACDC2D4E3FE02109348861183FE0710F73ACEC233FE0C013380B2F7A3FE10DE61C29D8E2
+3FE15A9D1E9D02E03FE1A61D5C682D4E3FE1F07DCD1395D73FE239BE23A07E7D3FE281E771CECDB8
+3FE2C9015BE4FBF63FE30F10730EFA883FE3541975E19F773FE3982333E121CA3FE3DB385D125C89
+3FE41D5CD340B7C83FE45E9E62134E973FE49F05412D792B3FE4DE98ADE229653FE51D637609C073
+3FE55B757E6764093FE598E34BD9D0DE3FE5D5B7095FEA3A3FE611E2E670D04C3FE64D87528C2DF2
+3FE688A451BB8A7D3FE6C34DBE40B3E03FE6FD7DCEE653773FE7373E3050934E3FE7709548A50953
+3FE7A99EF7A4FEA53FE7E2628CA1DB783FE81AE8DFD27A3E3FE8532904B408CC3FE88B5084FACD88
+3FE8C364A797B06D3FE8FB6D047554E23FE9336CD38222AF3FE96B71DE13F1223FE9A39CD06D7288
+3FE9DBEB40952DCB3FEA147E0B386DA33FEA4D584AD3D04C3FEA86A189B80D623FEAC0666B3856AB
+3FEAFAC5E939CF0F3FEB35E683179FB83FEB71E148BF47453FEBAED29E814ADA3FEBECF53703256E
+3FEC2C74CAF2309C3FEC6DC831E684183FECB12229B65F3B3FECF729F63FA85E3FED406573488D5F
+3FED8DF3E738FCEA3FEDE06E7328E22A3FEE3E84FF320A443FEE9E3C522256423FEF2ED2B39ECC80
+3FF0000000000000
+
+ 23F3BF73818B6D9273F4B998B0DDE9B573F53D3BE13279E133F5A2B608F0F33F8
+3F603E54F87BC42D3F6373099E9A4D6D3F66B34516D522F83F6A015B66E5CEDC3F6D5D8E6F5300E6
+3F70643359DBCEF23F722209ECA4A0533F73E8726BCEABB33F75B7D1535EF71C3F778FF265DA50C9
+3F79710BCE3269183F7B5BEF9C8E60AC3F7D50D5529ACB2A3F7F4F63DBE979203F80AC3315868EFE
+3F81B59451013EC93F82C53377F28F4E3F83D955158C606F3F84F3862A8877543F86143FF0BDA411
+3F873A0DC845055F3F886620F1CCE6D73F899895E40A24043F8AD1B4ED4BA47D3F8C112829AE22E3
+3F8D576D1D5CA1963F8EA4B9A040B5A23F8FF970823BF4003F90AAB0E3BDDFA13F915C7A92A50477
+3F9211E1BC7EFAA43F92CBEA16DAFC0F3F9389EA7654F15D3F944B329F8706243F951250B536317F
+3F95DD9C7129E2173F96AD2E606FFCBC3F9781C38993631D3F985B98BC973C733F993AA3345C5FC3
+3F9A1EF78882699E3F9B08F6E21BBC313F9BF8AB683704A73F9CEEB731C029833F9DEAA16D95453E
+3F9EEC95EB6C41CC3F9FF60A1BFF67353FA0834A521155743FA10EC302D08E883FA19E6B04B297B0
+3FA231EB82BA32F63FA2C999993096B73FA365C567387F303FA4060624FB86873FA4AB12E5D9CD38
+3FA555AC92AAF1AF3FA604FB85F5F30F3FA6B9A8F72568763FA774694D0568C93FA835733707DB1E
+3FA8FC781B77553D3FA9C9E3B80E56D53FAA9FCA278BC5F83FAB7C3A362A9F9A3FAC6111FB69AF82
+3FAD4F3ADAF3ADDC3FAE4540977992DD3FAF46C0FAE923613FB0290A0D30272F3FB0B4839963E135
+3FB1465EF057860C3FB1DE3AA711D6683FB27E3936B902663FB325B9C97EA6D13FB3D5DA427B8A89
+3FB48F175D0AE65B3FB55421FBEE35B23FB6238BC89AEC223FB7003936239A753FB7ECAA034616E9
+3FB8E89E75EE55713FB9F83EC75B3A733FBB1DF95B44DA1B3FBC5D26DFB4D7793FBDBAE58EA48606
+3FBF3CAA12CA9FCE3FC0759FD7C1689D3FC1691E03DA97843FC2803A1CF41E033FC3C87975CA456E
+3FC553292335FB453FC746F5442ADFA73FC9E387076A77663FCDFD9D20C31FA13FD34D19430667F5
+3FF0000000000000
+
+ 33FBE9B06F5BDE4893FC41702CD8C99F73FC6CAB672BBAE1B3FC90CB3786F66FF
+3FCAEDBF5F5974193FCC945C945FBB043FCE114AE0118DBB3FCF6ED72CEA744E3FD059D9ABF3C5B3
+3FD0F2440651FEC03FD182680E5F470D3FD20B99EB6A44A63FD28EF01FDAD2DA3FD30D070E9C3350
+3FD386C24C7999243FD3FC7F15215FED3FD46EDD38E09CFD3FD4DE140C18D7263FD54A7E2E26AB28
+3FD5B45032FB95E43FD61BC49FC839673FD6812CE3F738683FD6E4B7476FD03A3FD7468EAAE7585F
+3FD7A6D1B97FA0753FD805AF7C35513A3FD8633C238ED1FE3FD8BF7D68DDE1D73FD91A9B95AD17A7
+3FD974AB9AFF621F3FD9CDD0A5EA7FF63FDA2609264109D23FDA7D7E2F1C8ECD3FDAD42F250AED2C
+3FDB2A3058D770F53FDB7F8E2C83625A3FDBD46D703101F53FDC28C974966B343FDC7C98EDD44F57
+3FDCD007E1E9717E3FDD2319A53E05053FDD75E80242B9B33FDDC85DC3F6780A3FDE1A95E793E335
+3FDE6C8C3A1EC3873FDEBE5B3716D0213FDF100795CA6C323FDF6199C601DB3D3FDFB323D2D16267
+3FE0024F31ABD0BD3FE02B1A0601C4123FE053E1AD4F5D513FE07CB848E891CA3FE0A5998B46682E
+3FE0CE9F8B2768243FE0F7B2141629693FE120F8D45D93113FE14A3D5650F9103FE173DDAC28136B
+3FE19D7FC239CDDB3FE1C76B7B0384683FE1F1918FE8DA753FE21BF8AF93A93B3FE246A331BDF46B
+3FE2719653A449553FE29CE437311A043FE2C89413F7F9933FE2F4947A95E8433FE3210C70E145EB
+3FE34DF63404903B3FE37B614CFAADAD3FE3A959A1B026033FE3D7DBA72400163FE40700BE2A7515
+3FE436D0EF2F0E443FE467578C5DE1ED3FE498C06D6111A13FE4CAFEA0BC8F1B3FE4FE2846EBB300
+3FE532628C7279E23FE567C7B68BDA9C3FE59E697EFC8E523FE5D6744FF7EC7C3FE610124362422F
+3FE64B757FB10F583FE688D8EAD9742C3FE6C867B55307DB3FE70A795186F6873FE74F7D16DD27CA
+3FE7980370C5A0D03FE7E498D9BB9E6A3FE83607A35703B43FE88D9C96E12C183FE8ECC6B1FAA033
+3FE956CE8E590AC13FE9CE0DCF167BED3FEA5F68820C0E0A3FEB09A55B5FCC0D3FEC3D40358E17CC
+3FF0000000000000
+
+ 43F8A25E2B69909313F9A09244D7B67BE3FA35C54302566033FA9B2B9AFF665B9
+3FAFFDA2087315353FB3200BD9CA666B3FB63F85E594B9CA3FB95C4A191427D43FBC7764DA3D2360
+3FBF9012D453920A3FC15372BB3C7F8B3FC2DDDC1C1415F13FC4675707095D7A3FC5F01E4E2FE81C
+3FC7785F2E66C82F3FC8FFC6B181D8303FCA86CDEF4085CC3FCC0CF32C39FA393FCD9267040373FE
+3FCF16F2BEB609C53FD04D79097E89383FD10F28915979463FD1D06D97D692883FD291587D067A59
+3FD351CA9209B6D33FD411CC9328533B3FD4D162348E386A3FD590C1212D54933FD64F871E6DBB94
+3FD70DDCCE0602EA3FD7CB6DAC0C6F793FD8889E3A63BCA63FD9452F634104FC3FDA016876038355
+3FDABCED22FF08ED3FDB77C00CBFEFF73FDC31E97DF49D0E3FDCEB82B0D145D93FDDA469574774A4
+3FDE5C7F9C55ED003FDF13EEBE73AD293FDFCAC9B5D931A83FE0407252AC25603FE09B0977BF2422
+3FE0F53219FDE8C33FE14EEC2EFC1BCC3FE1A83870764D833FE20116DF3181483FE2597C419C91B0
+3FE2B16108DBAE9B3FE308C12F3714CB3FE35F9AD87962783FE3B5D4479AF8413FE40B908392FFA7
+3FE460C2B4FC4BE73FE4B5713173BD953FE5097435DE39ED3FE55CDA93491F3E3FE5AF9E7C333862
+3FE601C96C5812B13FE6534E4A6685B23FE6A43919CCFB363FE6F4777775D4DA3FE7441655D2DFA3
+3FE792E45087E63C3FE7E10D1ECE239F3FE82E6BA19A9D793FE87B203D6BB42F3FE8C6F6BC6006BC
+3FE91212EECFAFDB3FE95C5CD7CA45943FE9A5E3F74013073FE9EE8074D5C9563FEA3659520AB550
+3FEA7D575B7A4A9F3FEAC37436F3D5D53FEB08B10D7EE8973FEB4D0126835CA83FEB907353A64354
+3FEBD2E5894AE9043FEC14629E2F08DC3FEC54D1280682B03FEC9452ADBD0FF13FECD2C817F46B7E
+3FED104AEDDF0CB33FED4CA234DED2C23FED87DD42EF9D5E3FEDC1EBCD04C7023FEDFACA8898CAD2
+3FEE325F67F1D9DB3FEE68BD7A1BDF4E3FEE9D9E77752D5F3FEED1315DB2C8A13FEF0333CD36DE0E
+3FEF337A5589E5A73FEF621539A74D003FEF8DFE7C25CD783FEFB949C3A30A193FEFDD9F9AE8A72C
+3FF0000000000000
+
+ 53F8A3335812997D23F9A1690D5CB96EF3FA362A9C98218563FA9BE233EFB10CF
+3FB0050F7B7BD48C3FB328EDF19340323FB6486314902A533FB9663A830E6DB33FBC8121D05018E7
+3FBF9A5994E4889D3FC158A4216E7D113FC2E36060C5D59B3FC46D6720E5BB563FC5F6200FF3A300
+3FC77EA58229E8F03FC905BF10D850D23FCA8D2168EABAB03FCC13279A72C9003FCD99110245B252
+3FCF1DE27D75421A3FD050FAEE254CBD3FD1129965B3B3813FD1D3C4444526653FD294A3AF3E620F
+3FD35529EEB5AFDA3FD41533C98A5E603FD4D4EAC2208BEC3FD594211100E4AC3FD652D36B68D6F5
+3FD71106CD2FEA6C3FD7CE99F06E242A3FD88BBBD1AA8C583FD948223AEEB70A3FDA041CF43F9EE1
+3FDABF745B4915683FDB7A517A191E1E3FDC3449540545013FDCED99B8EAADF83FDDA63909B32E22
+3FDE5E4D7A96B8BE3FDF159AA14BF4CF3FDFCC19FB66690D3FE040E70685FC553FE09B5612CEBA36
+3FE0F553276418C03FE14EFC36809D343FE1A81AC5491D803FE200D36DDE86A23FE258EB8C459102
+3FE2B089F7A5D70E3FE307B3EB0B68B33FE35E4E324C8C1D3FE3B47557B64CCA3FE40A02B783CFC5
+3FE45EF3D6AEEDD63FE4B36519566D253FE50734F176B2D83FE55A8F585530E03FE5AD2E98BC6646
+3FE5FF330243DF4B3FE650962C7880073FE6A14E9FEA27B53FE6F16049C13B1E3FE740B6EB33C2A7
+3FE78F50452A2E6A3FE7DD3B3F41AE283FE82A63FD9567BD3FE876E9A3EFA2123FE8C2A6B31C654F
+3FE90DA2CAE3E24E3FE957CB3A48D1A53FE9A13CE3DB368F3FE9E9D3C55AB7E63FEA31A775FBC3D3
+3FEA78950B3C45623FEABEAA8614E9963FEB03D5CC31BC483FEB481ACD46F0CB3FEB8B74FACE5C05
+3FEBCDF0CF8431673FEC0F7B7CB122A43FEC50137D4329313FEC8FA9B7D7A8DC3FECCE345C54D8A3
+3FED0BB6BADCCB273FED482A20C9C69E3FED8379F2BB59AC3FEDBDB3ED7DE0583FEDF6BEC1D38A9D
+3FEE2E9D18D5189E3FEE6527463BCFB23FEE9A5DECFC997C3FEECE22DC806B273FEF0078E816330C
+3FEF310E079A6A393FEF6018FD75F7483FEF8C6BED6EE09F3FEFB84177AEF0B83FEFDD13B212F6CF
+3FF0000000000000
+
+ 63F847AE147AE14803F947AE147AE14803F9EB851EB851EC03FA47AE147AE1480
+3FA99999999999A03FAEB851EB851EC03FB1EB851EB851F03FB47AE147AE14803FB70A3D70A3D710
+3FB99999999999A03FBC28F5C28F5C303FBEB851EB851EC03FC0A3D70A3D70A83FC1EB851EB851F0
+3FC33333333333383FC47AE147AE14803FC5C28F5C28F5C83FC70A3D70A3D7103FC851EB851EB858
+3FC99999999999A03FCAE147AE147AE83FCC28F5C28F5C303FCD70A3D70A3D783FCEB851EB851EC0
+3FD00000000000043FD0A3D70A3D70A83FD147AE147AE14C3FD1EB851EB851F03FD28F5C28F5C294
+3FD33333333333383FD3D70A3D70A3DC3FD47AE147AE14803FD51EB851EB85243FD5C28F5C28F5C8
+3FD666666666666C3FD70A3D70A3D7103FD7AE147AE147B43FD851EB851EB8583FD8F5C28F5C28FC
+3FD99999999999A03FDA3D70A3D70A443FDAE147AE147AE83FDB851EB851EB8C3FDC28F5C28F5C30
+3FDCCCCCCCCCCCD43FDD70A3D70A3D783FDE147AE147AE1C3FDEB851EB851EC03FDF5C28F5C28F64
+3FE00000000000043FE051EB851EB8563FE0A3D70A3D70A83FE0F5C28F5C28FA3FE147AE147AE14C
+3FE199999999999E3FE1EB851EB851F03FE23D70A3D70A423FE28F5C28F5C2943FE2E147AE147AE6
+3FE33333333333383FE3851EB851EB8A3FE3D70A3D70A3DC3FE428F5C28F5C2E3FE47AE147AE1480
+3FE4CCCCCCCCCCD23FE51EB851EB85243FE570A3D70A3D763FE5C28F5C28F5C83FE6147AE147AE1A
+3FE666666666666C3FE6B851EB851EBE3FE70A3D70A3D7103FE75C28F5C28F623FE7AE147AE147B4
+3FE80000000000063FE851EB851EB8583FE8A3D70A3D70AA3FE8F5C28F5C28FC3FE947AE147AE14E
+3FE99999999999A03FE9EB851EB851F23FEA3D70A3D70A443FEA8F5C28F5C2963FEAE147AE147AE8
+3FEB33333333333A3FEB851EB851EB8C3FEBD70A3D70A3DE3FEC28F5C28F5C303FEC7AE147AE1482
+3FECCCCCCCCCCCD43FED1EB851EB85263FED70A3D70A3D773FEDC28F5C28F5C93FEE147AE147AE1B
+3FEE66666666666D3FEEB851EB851EBF3FEF0A3D70A3D7113FEF5C28F5C28F633FEFAE147AE147B5
+3FF0000000000000
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2017_I1487277/fnl3332.1jet.RRa-fastprod.conf
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2017_I1487277/fnl3332.1jet.RRa-fastprod.conf (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2017_I1487277/fnl3332.1jet.RRa-fastprod.conf (revision 1772)
@@ -0,0 +1,22 @@
+[global]
+include = nnlojet-gc.conf
+
+[jobs]
+;jobs = 10 ; Max. # of jobs (truncated to module maximum), D=mod
+;wall time = 3:00 ; Requested wall time in hh[:mm[:ss]] (also used for proxy lifetime)
+
+[parameters] ; This section defines the parameter space
+repeat = 1 ; How many times each parameter space point should be sampled
+parameters = ( SEED , EVENTS )
+SEED = range( 40000, 45000 )
+SEED type = expr
+;EVENTS = 13000
+EVENTS = 120000
+
+[UserTask]
+executable = fnlo-run-nnlojet.csh
+arguments = fnl3332 1jet RRa fastprod
+subst files = fnl3332.1jet.RRa-fastprod.run
+; NNLOJET production run
+input files = fnlo-run-nnlojet.pl fastNLO_v23_source_nnlojet_cvmfs.csh fnl3332.1jet.RRa-fastprod.run 1jet.RRa-8TeV.y.1e-7.RRa jet.RRa-8TeV.ptji_incl_y1.wrm jet.RRa-8TeV.ptji_incl_y2.wrm jet.RRa-8TeV.ptji_incl_y3.wrm jet.RRa-8TeV.ptji_incl_y4.wrm jet.RRa-8TeV.ptji_incl_y5.wrm jet.RRa-8TeV.ptji_incl_y6.wrm jet.8TeV.ptji_incl_y1.wrm jet.8TeV.ptji_incl_y2.wrm jet.8TeV.ptji_incl_y3.wrm jet.8TeV.ptji_incl_y4.wrm jet.8TeV.ptji_incl_y5.wrm jet.8TeV.ptji_incl_y6.wrm
+output files = fnl3332.1jet.RRa-fastprod.tar.gz
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2017_I1487277/fnl3332.1jet.RRb-fastprod.conf
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2017_I1487277/fnl3332.1jet.RRb-fastprod.conf (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2017_I1487277/fnl3332.1jet.RRb-fastprod.conf (revision 1772)
@@ -0,0 +1,22 @@
+[global]
+include = nnlojet-gc.conf
+
+[jobs]
+;jobs = 10 ; Max. # of jobs (truncated to module maximum), D=mod
+;wall time = 3:00 ; Requested wall time in hh[:mm[:ss]] (also used for proxy lifetime)
+
+[parameters] ; This section defines the parameter space
+repeat = 1 ; How many times each parameter space point should be sampled
+parameters = ( SEED , EVENTS )
+SEED = range( 50000, 50600 )
+SEED type = expr
+;EVENTS = 200000
+EVENTS = 1800000
+
+[UserTask]
+executable = fnlo-run-nnlojet.csh
+arguments = fnl3332 1jet RRb fastprod
+subst files = fnl3332.1jet.RRb-fastprod.run
+; NNLOJET production run
+input files = fnlo-run-nnlojet.pl fastNLO_v23_source_nnlojet_cvmfs.csh fnl3332.1jet.RRb-fastprod.run 1jet.RRb-8TeV.y.1e-7.RRb jet.RRb-8TeV.ptji_incl_y1.wrm jet.RRb-8TeV.ptji_incl_y2.wrm jet.RRb-8TeV.ptji_incl_y3.wrm jet.RRb-8TeV.ptji_incl_y4.wrm jet.RRb-8TeV.ptji_incl_y5.wrm jet.RRb-8TeV.ptji_incl_y6.wrm jet.8TeV.ptji_incl_y1.wrm jet.8TeV.ptji_incl_y2.wrm jet.8TeV.ptji_incl_y3.wrm jet.8TeV.ptji_incl_y4.wrm jet.8TeV.ptji_incl_y5.wrm jet.8TeV.ptji_incl_y6.wrm
+output files = fnl3332.1jet.RRb-fastprod.tar.gz
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2017_I1487277/1jet.LO-8TeV.y.1e-7.vBa
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2017_I1487277/1jet.LO-8TeV.y.1e-7.vBa (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2017_I1487277/1jet.LO-8TeV.y.1e-7.vBa (revision 1772)
@@ -0,0 +1,88 @@
+
+ 13FA65BA275AED2883FB1DED3CF7CE0983FB640088D4941A03FBA79ABCFC98B05
+3FBE3055775D6C8D3FC0D754B3853E423FC27EDC28AC66303FC414FBF1B5A5813FC59D494A32215B
+3FC71B12952FC4683FC88FCD7F73AFCF3FC9FDD97FB853EA3FCB65D31A37E57F3FCCC9355A8C0AD2
+3FCE288706EA9A653FCF84829C340B203FD06ED9BABF452B3FD11A37874C69F03FD1C4C036E237E7
+3FD26E6EFF1324643FD3177E2A6F549A3FD3BFBF8C0855B13FD4676FA519689A3FD50E7AFEB4DE7B
+3FD5B4FCA0DC5D753FD65AEE41B5DB523FD700513FD08A913FD7A52F5AF80E633FD8496EB4973D14
+3FD8ECF31BEF9A003FD98F99A3DB7C553FDA315BDFB43AE23FDAD22EDA64AF203FDB72163D51E9C8
+3FDC10F81BA8D5283FDCAEA757AC68AA3FDD4B13EF68FCE63FDDE62445E82A1E3FDE7FDE0F6E1D13
+3FDF181A374245873FDFAEE0A77554AE3FE02205F33D95DF3FE06BDD5F9C73433FE0B4DA121EBE4F
+3FE0FD0A3C177F803FE1446B57CF72963FE18B04149033223FE1D0CA00E730D33FE215BE573E9964
+3FE259E6227CA8B03FE29D4AD3D6E4A43FE2DFEF9D0874523FE321D2CD63C11C3FE36301752AB75C
+3FE3A3731B3A78A13FE3E33B4A795A223FE42259AB9EE9BE3FE460DE04534A5A3FE49EC45565625E
+3FE4DC1A532AE17C3FE518E3892735903FE5552DA998251E3FE590F8A8904C363FE5CC4FCE9769AD
+3FE6073815330FF63FE641C0FE8B0F653FE67BED360E46FC3FE6B5C434F681A33FE6EF51AF256BD5
+3FE7289A29B103FB3FE761ACE8F5B2063FE79A88B7D1185F3FE7D349EE9B4AA13FE80BEC35AC20A5
+3FE8448CD49AA6CC3FE87D28D867F9513FE8B5D549FB0C603FE8EE9A448625B03FE92784D2A262E7
+3FE960ABAA50ADA93FE99A124AA9B1233FE9D3DDF59E9E8E3FEA0E1B7FF529CA3FEA48EDAFAB07BC
+3FEA8465E6CB65C23FEAC0B157CAFAC83FEAFDE6C8F7D50B3FEB3C4385C9C0B23FEB7BE2375459C7
+3FEBBD27ABCD4D813FEC0051EF4260BD3FEC45D989AF11E63FEC8E451DCF0DF83FECDA5C92ED9F29
+3FED2B64B110A72C3FED820CBA2884723FEDE681BBC4F32B3FEE4C8C1E17EF363FEEF2F11288FE03
+3FF0000000000000
+
+ 23F4175FFFE6DC7C83F50C713A7EEB95C3F571D7D4B859DE63F5DDD49091400A8
+3F6233FBF022AEAE3F657CB494C29D3F3F68C80FDD8E18413F6C1ACA7327A7F53F6F76DF06E46551
+3F716E47EE91F5B53F73273607D48B4E3F74E6C99C1B7CF83F76AD047C68448A3F787A4D478EAB6B
+3F7A4F464E19439C3F7C2BE990721DB23F7E10988D1BA21B3F7FFDF81DB3F8BA3F80FA60EBD563DE
+3F81F9A623AD1AE43F83000716D354FA3F8407496A8195163F8516BBD4DDB0103F862ADF601F13AF
+3F87435C4D562C663F88621AF8EE74833F898677B18DB79F3F8AB0BA1E8720133F8BE1146731A271
+3F8D1771178F3BF93F8E5430263FDA843F8F977569C6DF923F9070D208F592F93F9119BE0A2077BE
+3F91C58CFCEA00733F9275EB8A6CAA3B3F932A4AF2BD721E3F93E14467407ED33F949DC088573C3E
+3F955E2C59E6273A3F96228B44439E883F96EBBEEFA4609A3F97B9C33797ED843F988CAFF357C334
+3F996490EBF7C6C03F9A41B64A11C17F3F9B243DBC873FB73F9C0CB431F1F6C03F9CFB1CD7778776
+3F9DEF2D978C7C613F9EE9C2E81739BD3F9FEB66849CA3823FA079EFFDF344A93FA101B08718B27D
+3FA18D3AAF30FEF13FA21CC9F67306553FA2B06409AB70A53FA348823BDF32873FA3E50E19FE88BC
+3FA4861716CBB61B3FA52CBD3EE0076B3FA5D86BB776A9DD3FA68966A8A9776E3FA7405FD08688A2
+3FA7FDBDF1A566563FA8C19E8A809BEF3FA98C1060E7415B3FAA5E51EB8187AC3FAB38C7E5F8F453
+3FAC1A9C8809773A3FAD06847D3C5E583FADFB87C2FD4A1C3FAEFA88018D5AD43FB0031F2AD6A863
+3FB08E1B6E3DCBAC3FB1200DC346B2513FB1B8E5D8634D0A3FB25985D55591613FB30309AAB63B82
+3FB3B5668BD1D2FE3FB471A1B8FDD5183FB53AD0ECF89A053FB60FA8A8D8025A3FB6F30F29A19B16
+3FB7E7545A3A262C3FB8EDC986A219D23FBA0A28D00BF20F3FBB4014D921E3FB3FBC9321125D1468
+3FBE0A7608D7B8D93FBFADA62D183D313FC0C412D928C3643FC1D4F1FC64F6903FC314FA32797C21
+3FC498CACB14B72F3FC6826994AA3D8F3FC913AE784495C53FCD23A4AD7E159A3FD2D4E6D629BC97
+3FF0000000000000
+
+ 33FC0304C5B2EB91F3FC50F8F1DA1CBB13FC7C793B5B62ADD3FCA06732AB2670A
+3FCBE53352B4747E3FCD86A03C937DD33FCEFEE78FF071313FD02B86ECFDF6AC3FD0CB3D5EFF9138
+3FD160E9CBEE677A3FD1EE5227C8F5863FD274C02AD2D6973FD2F54118DDD0123FD370994FD8ED9D
+3FD3E77E872F78C23FD45A7739FF762C3FD4C9F8C02BDD9A3FD536506DA39E9D3FD59FE4C8EE0E2A
+3FD606F05EBBCC6B3FD66BC42DF499A53FD6CE712F87A11A3FD72F41E24AF9EB3FD78E591B420873
+3FD7EBDA83A3D3483FD847E6D041775F3FD8A29D2E7E10BC3FD8FC2384EDF89D3FD954859EFF1F9B
+3FD9ABDF37853E183FDA025061B906A43FDA57E64DB32F603FDAACAF3958EAAC3FDB00B071074A6A
+3FDB540E51301A0A3FDBA6C310BD0BC23FDBF8EC3C0442983FDC4A96D3F2170B3FDC9BCB4840A5C8
+3FDCEC990540F06D3FDD3CFF45175A383FDD8D10F67865EF3FDDDCD401C9CA6A3FDE2C677467995B
+3FDE7BC5435B935B3FDECAFBF12148F63FDF1A132FFE82233FDF690C65EA27353FDFB7F8DA0D36A2
+3FE00371CAFE815D3FE02AEB975683803FE0526EEA106F013FE079FA5E9ADC183FE0A19472E9CEBE
+3FE0C946839F47763FE0F114EC51C9CA3FE11902CAD939EE3FE14107F882F74E3FE16940DA62E540
+3FE191A2C244514C3FE1BA3D3CECF3A73FE1E313FACFAABC3FE20C2DE130C4413FE235880D6FD3C3
+3FE25F3467D7C39C3FE28934B05CE3DA3FE2B38F1977D4FE3FE2DE424A54E1043FE30969F2F4DC34
+3FE334FF5BFF3F1B3FE36113A19934073FE38DAA56BC5BDC3FE3BADAC9C5A7113FE3E8B2D1ADFD84
+3FE4172517AC24203FE446642DF776EF3FE476638D8E61C13FE4A74499686FEF3FE4D91AEFA0071C
+3FE50BF8CE08694E3FE53FFE3E57CE3F3FE5754AF659837D3FE5ABFA41DBB7843FE5E43920515EA5
+3FE61E35FAE3F80B3FE65A28CD1E02163FE6984E51F367E53FE6D8F8889BC5553FE71C9BEB676B48
+3FE763BDC0A7F5263FE7AEE88250CB103FE7FF1141F2D0233FE855550B928EF03FE8B366EEE5B46E
+3FE91C2C0D1727713FE992E2EFFE6D223FEA23282C91B6A63FEACE8ED98871BD3FEC05CAEECA4ADF
+3FF0000000000000
+
+ 43F847AE147AE14803F947AE147AE14803F9EB851EB851EC03FA47AE147AE1480
+3FA99999999999A03FAEB851EB851EC03FB1EB851EB851F03FB47AE147AE14803FB70A3D70A3D710
+3FB99999999999A03FBC28F5C28F5C303FBEB851EB851EC03FC0A3D70A3D70A83FC1EB851EB851F0
+3FC33333333333383FC47AE147AE14803FC5C28F5C28F5C83FC70A3D70A3D7103FC851EB851EB858
+3FC99999999999A03FCAE147AE147AE83FCC28F5C28F5C303FCD70A3D70A3D783FCEB851EB851EC0
+3FD00000000000043FD0A3D70A3D70A83FD147AE147AE14C3FD1EB851EB851F03FD28F5C28F5C294
+3FD33333333333383FD3D70A3D70A3DC3FD47AE147AE14803FD51EB851EB85243FD5C28F5C28F5C8
+3FD666666666666C3FD70A3D70A3D7103FD7AE147AE147B43FD851EB851EB8583FD8F5C28F5C28FC
+3FD99999999999A03FDA3D70A3D70A443FDAE147AE147AE83FDB851EB851EB8C3FDC28F5C28F5C30
+3FDCCCCCCCCCCCD43FDD70A3D70A3D783FDE147AE147AE1C3FDEB851EB851EC03FDF5C28F5C28F64
+3FE00000000000043FE051EB851EB8563FE0A3D70A3D70A83FE0F5C28F5C28FA3FE147AE147AE14C
+3FE199999999999E3FE1EB851EB851F03FE23D70A3D70A423FE28F5C28F5C2943FE2E147AE147AE6
+3FE33333333333383FE3851EB851EB8A3FE3D70A3D70A3DC3FE428F5C28F5C2E3FE47AE147AE1480
+3FE4CCCCCCCCCCD23FE51EB851EB85243FE570A3D70A3D763FE5C28F5C28F5C83FE6147AE147AE1A
+3FE666666666666C3FE6B851EB851EBE3FE70A3D70A3D7103FE75C28F5C28F623FE7AE147AE147B4
+3FE80000000000063FE851EB851EB8583FE8A3D70A3D70AA3FE8F5C28F5C28FC3FE947AE147AE14E
+3FE99999999999A03FE9EB851EB851F23FEA3D70A3D70A443FEA8F5C28F5C2963FEAE147AE147AE8
+3FEB33333333333A3FEB851EB851EB8C3FEBD70A3D70A3DE3FEC28F5C28F5C303FEC7AE147AE1482
+3FECCCCCCCCCCCD43FED1EB851EB85263FED70A3D70A3D773FEDC28F5C28F5C93FEE147AE147AE1B
+3FEE66666666666D3FEEB851EB851EBF3FEF0A3D70A3D7113FEF5C28F5C28F633FEFAE147AE147B5
+3FF0000000000000
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2017_I1487277/fnl3332.1jet.RV-fastprod.conf
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2017_I1487277/fnl3332.1jet.RV-fastprod.conf (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2017_I1487277/fnl3332.1jet.RV-fastprod.conf (revision 1772)
@@ -0,0 +1,22 @@
+[global]
+include = nnlojet-gc.conf
+
+[jobs]
+;jobs = 10 ; Max. # of jobs (truncated to module maximum), D=mod
+;wall time = 3:00 ; Requested wall time in hh[:mm[:ss]] (also used for proxy lifetime)
+
+[parameters] ; This section defines the parameter space
+repeat = 1 ; How many times each parameter space point should be sampled
+parameters = ( SEED , EVENTS )
+SEED = range( 60000, 65000 )
+SEED type = expr
+;EVENTS = 13000
+EVENTS = 150000
+
+[UserTask]
+executable = fnlo-run-nnlojet.csh
+arguments = fnl3332 1jet RV fastprod
+subst files = fnl3332.1jet.RV-fastprod.run
+; NNLOJET production run
+input files = fnlo-run-nnlojet.pl fastNLO_v23_source_nnlojet_cvmfs.csh fnl3332.1jet.RV-fastprod.run 1jet.RV-8TeV.y.1e-7.vRa jet.RV-8TeV.ptji_incl_y1.wrm jet.RV-8TeV.ptji_incl_y2.wrm jet.RV-8TeV.ptji_incl_y3.wrm jet.RV-8TeV.ptji_incl_y4.wrm jet.RV-8TeV.ptji_incl_y5.wrm jet.RV-8TeV.ptji_incl_y6.wrm jet.8TeV.ptji_incl_y1.wrm jet.8TeV.ptji_incl_y2.wrm jet.8TeV.ptji_incl_y3.wrm jet.8TeV.ptji_incl_y4.wrm jet.8TeV.ptji_incl_y5.wrm jet.8TeV.ptji_incl_y6.wrm
+output files = fnl3332.1jet.RV-fastprod.tar.gz
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2017_I1487277/fnl3332.1jet.RRb-warm.run
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2017_I1487277/fnl3332.1jet.RRb-warm.run (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2017_I1487277/fnl3332.1jet.RRb-warm.run (revision 1772)
@@ -0,0 +1,187 @@
+NNLOJET_RUNCARD
+RRb-8TeV ! Job name id, must be less than 10 characters
+1jet ! Process name
+3000000 ! Number of events
+10 ! Number of iterations
+5 ! Seed number
+.true. ! Warmup
+.false. ! Production
+CT14nnlo ! PDF set
+0 ! PDF member
+antikt ! Jet algorithm, accepts 'kt', 'cam' or 'antikt'
+0.7d0 ! Rcut
+.false. ! exclusive
+0 ! Heavy particle decay type
+.1e-7 ! Technical cutoff y0
+.false. ! angular averaging of the phase space, default to true
+2 ! Virtual Integration method, use 2 if you're not sure
+b ! RR a/b region flag. Accepts 'a','b' or 'all'.
+0 ! set to zero for MC, 2 for point test
+.false. ! print max weight flag
+.true. ! momentum mapping and PDF storage flag
+.true. ! colour sampling flag
+.false. ! explicit pole check flag, stops integration when set to true
+
+PHYSICAL_PARAMETERS
+8000d0 ! roots
+125d0 ! Mass of the Higgs Boson
+0.004029643852d0 ! Width of the Higgs Boson
+91.1876d0 ! Mass of the Z Boson
+2.4952d0 ! Width of the Z Boson
+80.398d0 ! Mass of the W Boson
+2.1054d0 ! Width of the W Boson
+173.2d0 ! Mass of the Top Quark
+1.41d0 ! Width of the Top Quark
+4.18d0 ! Mass of the Bottom Quark
+0d0 ! Width of the Bottom Quark
+1.275d0 ! Mass of the Charm Quark
+0d0 ! Width of the Charm Quark
+
+! UNIT_PHASE
+
+SELECTORS
+ select jets_pt min = 21 max = 2500
+ select jets_abs_y max = 3.0
+ select njets min = 1
+END_SELECTORS
+
+
+
+HISTOGRAMS
+
+COMPOSITE > xptj0_y1 [21,24,28,32,37,43,49,56,64,74,84,97,114,133,153,174,196,220,245,272,300,330,362,395,430,468,507,548,592,638,686,737,790,846,905,967,1032,1101,1172,1248,1327,1410,1497,1588,1784,2116,2500]
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y2 [21,24,28,32,37,43,49,56,64,74,84,97,114,133,153,174,196,220,245,272,300,330,362,395,430,468,507,548,592,638,686,737,790,846,905,967,1032,1101,1172,1248,1327,1410,1497,1588,1784,2116,2500]
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y3 [21,24,28,32,37,43,49,56,64,74,84,97,114,133,153,174,196,220,245,272,300,330,362,395,430,468,507,548,592,638,686,737,790,846,905,967,1032,1101,1172,1248,1327,1410,1497,1588,1784,2116]
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y4 [21,24,28,32,37,43,49,56,64,74,84,97,114,133,153,174,196,220,245,272,300,330,362,395,430,468,507,548,592,638,686,737,790,846,905,967,1032,1101,1172,1248,1327,1410]
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y5 [21,24,28,32,37,43,49,56,64,74,84,97,114,133,153,174,196,220,245,272,300,330,362,395,430,468,507,548,592,638,686,737,790,846,905]
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y6 [21,24,28,32,37,43,49,56,64,74,84,97,114,133,153,174,196,220,245,272,300,330,362,395,430,468,507,548]
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=2.5 max=3.0
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=2.5 max=3.0
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=2.5 max=3.0
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=2.5 max=3.0
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+END_HISTOGRAMS
+
+SCALES
+ muf = ptj1 mur = ptj1
+END_SCALES
+
+!####### SYNTAX ######################
+!##
+!## REWEIGHT {observable-name}**{val_power}
+!##
+!#####################################
+
+! REWEIGHT ht_part**4
+! REWEIGHT ht_part**1.4 !# DB
+REWEIGHT ht_part**6.5 !# KR
+
+CHANNELS
+ RR
+END_CHANNELS
+
+SETUP
+END_SETUP
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2017_I1487277/fnl3332.1jet.RV-warm.run
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2017_I1487277/fnl3332.1jet.RV-warm.run (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2017_I1487277/fnl3332.1jet.RV-warm.run (revision 1772)
@@ -0,0 +1,187 @@
+NNLOJET_RUNCARD
+RV-8TeV ! Job name id, must be less than 10 characters
+1jet ! Process name
+1000000 ! Number of events
+10 ! Number of iterations
+6 ! Seed number
+.true. ! Warmup
+.false. ! Production
+CT14nnlo ! PDF set
+0 ! PDF member
+antikt ! Jet algorithm, accepts 'kt', 'cam' or 'antikt'
+0.7d0 ! Rcut
+.false. ! exclusive
+0 ! Heavy particle decay type
+.1e-7 ! Technical cutoff y0
+.false. ! angular averaging of the phase space, default to true
+2 ! Virtual Integration method, use 2 if you're not sure
+all ! RR a/b region flag. Accepts 'a','b' or 'all'.
+0 ! set to zero for MC, 2 for point test
+.false. ! print max weight flag
+.true. ! momentum mapping and PDF storage flag
+.true. ! colour sampling flag
+.false. ! explicit pole check flag, stops integration when set to true
+
+PHYSICAL_PARAMETERS
+8000d0 ! roots
+125d0 ! Mass of the Higgs Boson
+0.004029643852d0 ! Width of the Higgs Boson
+91.1876d0 ! Mass of the Z Boson
+2.4952d0 ! Width of the Z Boson
+80.398d0 ! Mass of the W Boson
+2.1054d0 ! Width of the W Boson
+173.2d0 ! Mass of the Top Quark
+1.41d0 ! Width of the Top Quark
+4.18d0 ! Mass of the Bottom Quark
+0d0 ! Width of the Bottom Quark
+1.275d0 ! Mass of the Charm Quark
+0d0 ! Width of the Charm Quark
+
+! UNIT_PHASE
+
+SELECTORS
+ select jets_pt min = 21 max = 2500
+ select jets_abs_y max = 3.0
+ select njets min = 1
+END_SELECTORS
+
+
+
+HISTOGRAMS
+
+COMPOSITE > xptj0_y1 [21,24,28,32,37,43,49,56,64,74,84,97,114,133,153,174,196,220,245,272,300,330,362,395,430,468,507,548,592,638,686,737,790,846,905,967,1032,1101,1172,1248,1327,1410,1497,1588,1784,2116,2500]
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y2 [21,24,28,32,37,43,49,56,64,74,84,97,114,133,153,174,196,220,245,272,300,330,362,395,430,468,507,548,592,638,686,737,790,846,905,967,1032,1101,1172,1248,1327,1410,1497,1588,1784,2116,2500]
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y3 [21,24,28,32,37,43,49,56,64,74,84,97,114,133,153,174,196,220,245,272,300,330,362,395,430,468,507,548,592,638,686,737,790,846,905,967,1032,1101,1172,1248,1327,1410,1497,1588,1784,2116]
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y4 [21,24,28,32,37,43,49,56,64,74,84,97,114,133,153,174,196,220,245,272,300,330,362,395,430,468,507,548,592,638,686,737,790,846,905,967,1032,1101,1172,1248,1327,1410]
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y5 [21,24,28,32,37,43,49,56,64,74,84,97,114,133,153,174,196,220,245,272,300,330,362,395,430,468,507,548,592,638,686,737,790,846,905]
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y6 [21,24,28,32,37,43,49,56,64,74,84,97,114,133,153,174,196,220,245,272,300,330,362,395,430,468,507,548]
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=2.5 max=3.0
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=2.5 max=3.0
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=2.5 max=3.0
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=2.5 max=3.0
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+END_HISTOGRAMS
+
+SCALES
+ muf = ptj1 mur = ptj1
+END_SCALES
+
+!####### SYNTAX ######################
+!##
+!## REWEIGHT {observable-name}**{val_power}
+!##
+!#####################################
+
+! REWEIGHT ht_part**4
+! REWEIGHT ht_part**1.4 !# DB
+REWEIGHT ht_part**6.5 !# KR
+
+CHANNELS
+ RV
+END_CHANNELS
+
+SETUP
+END_SETUP
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2017_I1487277/fnl3332.1jet.VV-fastprod.conf
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2017_I1487277/fnl3332.1jet.VV-fastprod.conf (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2017_I1487277/fnl3332.1jet.VV-fastprod.conf (revision 1772)
@@ -0,0 +1,22 @@
+[global]
+include = nnlojet-gc.conf
+
+[jobs]
+;jobs = 10 ; Max. # of jobs (truncated to module maximum), D=mod
+;wall time = 3:00 ; Requested wall time in hh[:mm[:ss]] (also used for proxy lifetime)
+
+[parameters] ; This section defines the parameter space
+repeat = 1 ; How many times each parameter space point should be sampled
+parameters = ( SEED , EVENTS )
+SEED = range( 70000, 70100 )
+SEED type = expr
+;EVENTS = 800000
+EVENTS = 10000000
+
+[UserTask]
+executable = fnlo-run-nnlojet.csh
+arguments = fnl3332 1jet VV fastprod
+subst files = fnl3332.1jet.VV-fastprod.run
+; NNLOJET production run
+input files = fnlo-run-nnlojet.pl fastNLO_v23_source_nnlojet_cvmfs.csh fnl3332.1jet.VV-fastprod.run 1jet.VV-8TeV.y.1e-7.vBa jet.VV-8TeV.ptji_incl_y1.wrm jet.VV-8TeV.ptji_incl_y2.wrm jet.VV-8TeV.ptji_incl_y3.wrm jet.VV-8TeV.ptji_incl_y4.wrm jet.VV-8TeV.ptji_incl_y5.wrm jet.VV-8TeV.ptji_incl_y6.wrm jet.8TeV.ptji_incl_y1.wrm jet.8TeV.ptji_incl_y2.wrm jet.8TeV.ptji_incl_y3.wrm jet.8TeV.ptji_incl_y4.wrm jet.8TeV.ptji_incl_y5.wrm jet.8TeV.ptji_incl_y6.wrm
+output files = fnl3332.1jet.VV-fastprod.tar.gz
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2017_I1487277/1jet.R-8TeV.y.1e-7.vRa
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2017_I1487277/1jet.R-8TeV.y.1e-7.vRa (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2017_I1487277/1jet.R-8TeV.y.1e-7.vRa (revision 1772)
@@ -0,0 +1,154 @@
+
+ 13F2459C2B7CBD2B13F3725ED4D91563C3F48086D76E26ED83F52D47BA9F58EE0
+3F599CD7752825843F60809BC5862A563F6475ED261961773F68D4218D02A8CF3F6D62E09F8F59BB
+3F71231A64BA85033F73AE202A086F043F766886405460B03F795F3973B993643F7C95334C7F1545
+3F7FF52E7127C0793F81BD7FE6DE2DDA3F8392872830E0B23F857D855BDD3DA03F877F2E70C9ECB4
+3F89955B313F376D3F8BC019DBF5311F3F8DFC3F1BA758DA3F90255403B2B8753F9155B95EA791D8
+3F92903EEF2D6AF93F93D3B0B8431E043F95212E67199F6D3F9679D12E661AA53F97DBE8D64E4229
+3F9947E594F2BF353F9ABF70E99EEF893F9C40763EF54D4B3F9DCD6711D8C49A3F9F65D90C824E3D
+3FA084BD09950A7D3FA15B6DE5FFD9B03FA237D90AF461C33FA319DF9F2FC4143FA4018C34D832B0
+3FA4EFADB1DBA9C03FA5E5144A5CDDCB3FA6E1F828C188153FA7E571135E0FB13FA8EFA4C6609D00
+3FAA013C20F5912A3FAB1B2473DD908D3FAC3C6337A6E7393FAD65CBF626A8113FAE97446D8409A5
+3FAFD107E81332763FB0899EE8E1BD773FB12F0FBC407CFE3FB1D8C367048D643FB2877A4BA3D948
+3FB33AE5C3077C373FB3F39AA754C98A3FB4B1804D9BDD9A3FB57529C94084673FB63E5B95D0C0C5
+3FB70CEA83461D353FB7E1C8EFC0825B3FB8BCAD383089C93FB99ED3C85500D13FBA87ACC6F6E628
+3FBB77A74D9345023FBC6F082EB0E3D63FBD6E325570FCD63FBE7574149717233FBF8522E7CF337A
+3FC04F1D00A9F6AA3FC0E076E54C592A3FC176F33E0E43E43FC2131C7112674D3FC2B4BED9BCF448
+3FC35C614D69D2463FC40A1D66891BC03FC4BF1A8AAEC94C3FC57BB7676C38503FC63FF890EB2ACB
+3FC70CBC76599B6C3FC7E2406467296B3FC8C1CE57B29A743FC9ABF73DEABB383FCAA1F6D3B01085
+3FCBA46807D4A59B3FCCB4BAD0DBDABB3FCDD535475A0F883FCF06C5C302E6DA3FD02683267CBD4F
+3FD0D4B35161A0EF3FD1908C88492FA63FD25C07EBCCAB673FD33A0DF939D6543FD430136239F201
+3FD544B3B7002E6D3FD681779560062D3FD80EDE1BCDBF9F3FD9AFB0EDC4B1EA3FDDF5F8D4E56273
+3FF0000000000000
+
+ 23FB43B3D606404E83FBFF501BCEDD1DC3FC4637FF145CB0D3FC88863B7754381
+3FCC57AB0CB082903FCFF69971C30C123FD1AEF845FF1ECF3FD354AA3BD606023FD4E0AFEA3B14E9
+3FD65DD0163D77403FD7C1975C4161DD3FD910967DE368503FDA53EB1D8BF9A13FDB83C6265B0D48
+3FDCA8BC49CE8CF03FDDB9A237F3E2803FDEC775C0A275923FDFAFDB14BDE2213FE03A575459E94E
+3FE08E02617D11AF3FE0DD519021BF4E3FE12E7DA8F9BA483FE17BFDE03FE2203FE1C949370E25AF
+3FE214D1931FFC6D3FE25F1F03D22BAB3FE2A9A870F8361D3FE2F2E23D7E1E303FE33A773D495439
+3FE381BA3CD844493FE3C77533E04AB93FE40BBEBECA70073FE45025D4B861233FE491E01683C66E
+3FE4D35FC3F911783FE51328C48F1B263FE551693975BAE73FE58E6012D185443FE5CA8811BB7122
+3FE6063F508C444E3FE640F79BDC9B273FE67B065426A3943FE6B33C1539D93D3FE6EB9FC924C6ED
+3FE7234309EA93B83FE7593D3E9B7A4C3FE78F8714F894333FE7C41D2F65EDB63FE7F80C1E98018A
+3FE82B359942655E3FE85D60B216642B3FE88EC9E02C3DE23FE8BF3226EDE8C73FE8EF12FBA8E082
+3FE91DF8AD3783193FE94C44097665EF3FE979F64D29F0B53FE9A702BA6EB4493FE9D31945E2D56F
+3FE9FEA3B0D592443FEA29DBA187E9B03FEA543036C465C53FEA7E5973907BAE3FEAA7C93D6B3935
+3FEAD0A38F1B5C743FEAF90C8A768B303FEB20F5321FAE7A3FEB486FD79BBB3D3FEB6F595D2D4D71
+3FEB95B8B4208E443FEBBBBA8AB4B1EE3FEBE17C14816BFD3FEC06F16C52BB2C3FEC2BCCF876B1F1
+3FEC5069C0987B903FEC749ECC5C15203FEC98B8CCEC3A053FECBC76AA3AF7E43FECDFFD4D6593FD
+3FED034D9E4A30F33FED263F4DED4B513FED48E4F6F3CF163FED6B5B17A2849D3FED8DAF92655B4E
+3FEDB0116DA53F6D3FEDD259939034B63FEDF4A732D86EC43FEE17028CB63FCB3FEE3980DE8F992D
+3FEE5C22695D808C3FEE7F3DEA5E520B3FEEA27E88A6F4783FEEC5EBC74734623FEEEA945D35546C
+3FEF0F45F455AC4F3FEF370D35C90BE93FEF5FC13F42566B3FEF8A7B2104320D3FEFC053277869C5
+3FF0000000000000
+
+ 33FCCE1FA775813F83FD207951D9AFCDF3FD3A75898ECC8023FD4BC0BF82AFF80
+3FD584EAE00E013D3FD62C8099519E613FD6BE052BAE1F7A3FD746CBAC1E73C53FD7BE3C1E5A1A32
+3FD82B7C5046AAA23FD88A11A11EAD853FD8E2EBADD526973FD932FFD7300F7D3FD9803D56681C9E
+3FD9C73AEF833B353FDA0A10142E8D2D3FDA48E80C33B65A3FDA8456D18108943FDABC8AFA55EFE0
+3FDAF22CCF4D71633FDB253BA4685EB23FDB56225F479FD73FDB8590268B1A2D3FDBB34D48DDD07E
+3FDBE00E6C08C5A43FDC0BE8A829CAA93FDC370A4ABD15043FDC61941DE98C703FDC8BCCAAD051B5
+3FDCB5A0CA9CFC843FDCDF13F478A2B63FDD082C33027AD13FDD310F40A18F933FDD59CBD3829FFA
+3FDD82743337383E3FDDAB1D108B7DE03FDDD39C2052F07D3FDDFC32E1B0E4563FDE24DECD4E4020
+3FDE4DC17C22152B3FDE76DBCEAEBF6B3FDEA03580D784F13FDECA03340461203FDEF44A01A6346D
+3FDF1EEFDFE82BB23FDF4A1A2E57AAC33FDF75E1A1B53FF23FDFA2560283A4EF3FDFCFB013A1E109
+3FDFFDAA8BB351663FE015E4FB33E9C83FE02CA0C6B376F93FE042EC5A4933743FE058EE70CC6F5E
+3FE06E9CF4ED22ED3FE08401A90735FF3FE09922F9E7D8253FE0AE086C384ECA3FE0C2B8D379E7B5
+3FE0D7410C5F16A83FE0EBA619B45BEA3FE0FFFF1C777DBC3FE11450E24A71343FE128942623F987
+3FE13CE4933E1CB03FE1513D5133F9CA3FE1659FACF287EE3FE179C7289D19553FE18E03BD5CAD7F
+3FE1A25C464BFC403FE1B729A3D17F403FE1CC2A500B849E3FE1E166EC77D6613FE1F6EB52477495
+3FE20CC16879DED73FE22310AC341FA83FE239D23ED257F23FE2516AAEA3ACCD3FE269D539AFE4C4
+3FE283446E6879613FE29DE39B471DBF3FE2B9FE219DB35C3FE2D76ABD1BCE123FE2F6BC86610C29
+3FE317FB47E7A1453FE33B7EFFC3AF613FE3616292DCE9CE3FE389BF8C33ECB63FE3B4F027B0B5E7
+3FE3E4D93BE94F753FE41A393DAC80073FE457EA4E548DBA3FE49C9B37F1D0873FE4E7FA9FC30E72
+3FE53E02A04181103FE5A4454DDD16103FE631F87EFD6D913FE70013E68FED243FE8CE8DC3A2B3F2
+3FF0000000000000
+
+ 43F87F8E87F6D1E8D3F9817E985D7FE593FA1F8C4E21838EE3FA7B1240A188FD1
+3FAD4C1F2B82B7713FB167A99A98088F3FB413E3FBD2DD723FB6B0A76505458B3FB93866CDCCFF4A
+3FBBBF874CA625BE3FBE3A302FD35F573FC057C1041A4F123FC18EB142A282A83FC2C2DB601E7208
+3FC3F587A49CD7113FC52786E3AFB29F3FC65BCF72844AA83FC79099852330493FC8C954BDFB5319
+3FC9FEFCD3C415933FCB35A70DD944743FCC68AF231B18713FCD9BD7936AFC693FCECF8E59F6FF32
+3FD001CD3B6362253FD09C2E13A2532F3FD1368CD4B96F243FD1D095267981E23FD26CB7BA885A2A
+3FD30775F80D1B8D3FD3A3847BF6E5053FD43D6A8329C75B3FD4D89FD881E4C23FD57290FCFF2762
+3FD60DBBAB47E0633FD6A765B16E95CD3FD7430D2B9033453FD7DE36B998520A3FD87C36FCBC8075
+3FD91B4483F52EE23FD9BE13B27031613FDA62019A1C38C83FDB09675673D4B73FDBB2F2C8E27E77
+3FDC6045490C6BE33FDD15BB90B306F13FDDCB60AA919BE03FDE8E2D1FCBBD983FDF41B203997147
+3FE004847E18D7C03FE0623624EB86B33FE0C06AA16A221F3FE11FF83DC815543FE17ADD57CC47CC
+3FE1D598D21996D73FE22CBC7F5802553FE28336C92CEEF43FE2D6B844B1611B3FE3293261309AB3
+3FE379E4FB0D1B1F3FE3CA2D22FE70703FE417C7915409913FE46623516A49853FE4B309E5FF39E5
+3FE5012EE171028D3FE54DD584513D403FE59B949E97AFAA3FE5E8F582C062D23FE636AE2B44222D
+3FE683F5A63366AB3FE6D1670CEEB8F13FE71EF0ABC9A0C13FE76BA5D2841C753FE7B82985BC50A9
+3FE804DA0F5C35383FE8523CA66024C13FE89E4E4C7CB2563FE8EA341BF589713FE935DE18E34F3D
+3FE98345B33AA9A63FE9D087390626603FEA1E5D785407BA3FEA6AEF9408E9F33FEAB8132BF591A9
+3FEB0532EA3731E33FEB52BEAC164EEB3FEBA027F17C13B73FEBEEB725373C293FEC3C636488FEBE
+3FEC8C1AD4E2191A3FECDC49DD759D283FED2FC19C4145BC3FED837B50EEBFDF3FEDD9C5E2AF1750
+3FEE301C15EFE94C3FEE8990A2C080B33FEEE5A699DA00513FEF4456EDA5F87C3FEFA2E06F90A5A7
+3FF0000000000000
+
+ 53FCEACCFC29CAA3D3FD3CA29250FC8263FD60308599D463F3FD7B0969F80F0BF
+3FD9003B802362DC3FDA15E7E21595513FDB044DEF9746EB3FDBD63B76BE27733FDC92838A6E4135
+3FDD3D564B65235A3FDDD9A93F1BB2FD3FDE6A3CB15456233FDEF16B56FB0ADD3FDF6FB8BC426017
+3FDFE7348A136E723FE02BFFE87B99B93FE0620668E4438F3FE0957D8DF42B213FE0C6F9E105566A
+3FE0F67C463FF2633FE1241E0040BFFF3FE1502ED7EFA69D3FE17B0A3E6110C73FE1A47EAD0DA2A7
+3FE1CCD9675C2A633FE1F3F30220F95C3FE219E5FE2047793FE23F1CE347E88A3FE2631D0B6A2D18
+3FE2866C812BD2923FE2A9115145913C3FE2CAF4EB11AAED3FE2EC5ACAFDB3933FE30D117F666722
+3FE32D3CE2A2AE6F3FE34CB9573604553FE36BEB14BAED273FE38A81ABB60EED3FE3A8E94BF4BB50
+3FE3C6E14E10535B3FE3E49E6C60E4EB3FE401BE6DCEEF643FE41E7D2B9B4B773FE43B2D2A75D45C
+3FE4576598013FA53FE4739572EA548D3FE48F7C425EDEC83FE4AACCCECA56DB3FE4C6140A8E0486
+3FE4E1457456DFE03FE4FC7E3B78D7683FE517B9CBBE9E443FE532C2F321CBE13FE54DB62C6A11E4
+3FE5687B2C5ADCBB3FE5832F1D989EBD3FE59DDF3102CA403FE5B898007531FC3FE5D36A6EFE0678
+3FE5EE1FABD2497D3FE608DB7E422B923FE623A71AE9BC123FE63E782DB485DB3FE65964DB02BF9C
+3FE6746E5F1C52B93FE68FA7899D73513FE6AB153A8165643FE6C69D90FF95983FE6E26CFB4539E6
+3FE6FE66911BBA523FE71AB5F201BC273FE73757B4752FA73FE7545AB74383BD3FE771519E9BF9C1
+3FE78ECEB6EEAAB93FE7ACD667354BB33FE7CC1581627CFD3FE7EBE7FED1025F3FE80C810795C537
+3FE82E1746389C233FE8507E761DB7D63FE87431A0E3D44F3FE898EFD254563F3FE8BF4A18867B5D
+3FE8E7801727CE4B3FE911E2AFFDFE1D3FE93EEE7ABACFCF3FE96F60BE17630B3FE9A4128EDA2215
+3FE9DE32B3A0126A3FEA1FF2B21ED7753FEA6DB879B4ACF73FEAC7DC38BD0AAC3FEB670673942F79
+3FEC898AAB2B70413FED3733ACFCC4943FED847B835FB6CE3FEDA44D905BDAE83FEE37DC253E0022
+3FF0000000000000
+
+ 63FC046C54B93E9983FC54956D600144A3FC803A85BF1CD0F3FCA511222237889
+3FCC32FFF929759B3FCDD9B0060BD45C3FCF57CD68EC305A3FD057330474A3A33FD0F63206513EC1
+3FD18862950094B93FD215DB28183F423FD29D024D9776DC3FD31D86A5573FED3FD39896F0B83159
+3FD40EB32FF3A6D63FD481B82DBC527E3FD4F01D707DE7943FD55CEB344766553FD5C46614339560
+3FD62D0083663C6D3FD68F02894BCFCE3FD6F1235FCEB4F73FD74FE737AA808D3FD7AE4A6D501867
+3FD80AB5C4DF49AD3FD866434573FB9E3FD8C07A9D2A81A43FD91A36F1343ADD3FD972003B8AAD3D
+3FD9C90E0D3EA5373FDA1EB4E1E57E343FDA736AA795915A3FDAC684AA8066F23FDB19376DA5A35D
+3FDB6B8F0706B8993FDBBDB474D47BE43FDC0DADCC16C25C3FDC5C70FAFF98053FDCAAD69AC5629F
+3FDCF978D31320583FDD480FF54425063FDD953BD1A784783FDDE2B14AE335AC3FDE30C447D4281D
+3FDE7E7A4044FC673FDECCA27E4CEB4B3FDF19FDC39B870F3FDF6644F9495BF93FDFB48574FB3E85
+3FDFFF3A529FD95F3FE026E06D55BEAF3FE04CCCA4F704353FE0737F9E8C1A563FE099FBE82F9BD3
+3FE0C057E6EFF0223FE0E6702AD86CED3FE10CC4D653F3B73FE13302EEA947513FE15A3F816D0C93
+3FE181D6E409B0D93FE1A9D5E0D685E63FE1D1D0E625F8983FE1F9E5680E6EE53FE22299507E40DE
+3FE24B234F7805953FE27412E81AAAB93FE29D4FA9D0BB523FE2C7514A0D34763FE2F197D0A9F3F0
+3FE31C2A802FBFC43FE347C18D3D15E63FE37393EDDD524C3FE39FBFAC1216083FE3CC40A88D63BF
+3FE3F9CE705829213FE428547A120CE43FE457520DD70D773FE4877B301E9A563FE4B880FB7AF527
+3FE4EAB1F304EFA63FE51DBBEDDDD0963FE551EE2DCC7E7E3FE587913A900A673FE5BEFBA38577DF
+3FE5F8186611CB173FE6333926C434423FE67087D0266F613FE6B10273B1A5033FE6F375B8DAF9E4
+3FE73B2A095E34143FE784A6ECAB312D3FE7D5E362F38FAF3FE82B898C39797F3FE88A393BA0A413
+3FE8F1F2971F1FC53FE96C21ED882BBB3FE9FE85672AC3713FEAAEAE6CC56C433FEBF41789630ED4
+3FF0000000000000
+
+ 73F847AE147AE14803F947AE147AE14803F9EB851EB851EC03FA47AE147AE1480
+3FA99999999999A03FAEB851EB851EC03FB1EB851EB851F03FB47AE147AE14803FB70A3D70A3D710
+3FB99999999999A03FBC28F5C28F5C303FBEB851EB851EC03FC0A3D70A3D70A83FC1EB851EB851F0
+3FC33333333333383FC47AE147AE14803FC5C28F5C28F5C83FC70A3D70A3D7103FC851EB851EB858
+3FC99999999999A03FCAE147AE147AE83FCC28F5C28F5C303FCD70A3D70A3D783FCEB851EB851EC0
+3FD00000000000043FD0A3D70A3D70A83FD147AE147AE14C3FD1EB851EB851F03FD28F5C28F5C294
+3FD33333333333383FD3D70A3D70A3DC3FD47AE147AE14803FD51EB851EB85243FD5C28F5C28F5C8
+3FD666666666666C3FD70A3D70A3D7103FD7AE147AE147B43FD851EB851EB8583FD8F5C28F5C28FC
+3FD99999999999A03FDA3D70A3D70A443FDAE147AE147AE83FDB851EB851EB8C3FDC28F5C28F5C30
+3FDCCCCCCCCCCCD43FDD70A3D70A3D783FDE147AE147AE1C3FDEB851EB851EC03FDF5C28F5C28F64
+3FE00000000000043FE051EB851EB8563FE0A3D70A3D70A83FE0F5C28F5C28FA3FE147AE147AE14C
+3FE199999999999E3FE1EB851EB851F03FE23D70A3D70A423FE28F5C28F5C2943FE2E147AE147AE6
+3FE33333333333383FE3851EB851EB8A3FE3D70A3D70A3DC3FE428F5C28F5C2E3FE47AE147AE1480
+3FE4CCCCCCCCCCD23FE51EB851EB85243FE570A3D70A3D763FE5C28F5C28F5C83FE6147AE147AE1A
+3FE666666666666C3FE6B851EB851EBE3FE70A3D70A3D7103FE75C28F5C28F623FE7AE147AE147B4
+3FE80000000000063FE851EB851EB8583FE8A3D70A3D70AA3FE8F5C28F5C28FC3FE947AE147AE14E
+3FE99999999999A03FE9EB851EB851F23FEA3D70A3D70A443FEA8F5C28F5C2963FEAE147AE147AE8
+3FEB33333333333A3FEB851EB851EB8C3FEBD70A3D70A3DE3FEC28F5C28F5C303FEC7AE147AE1482
+3FECCCCCCCCCCCD43FED1EB851EB85263FED70A3D70A3D773FEDC28F5C28F5C93FEE147AE147AE1B
+3FEE66666666666D3FEEB851EB851EBF3FEF0A3D70A3D7113FEF5C28F5C28F633FEFAE147AE147B5
+3FF0000000000000
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2017_I1487277/fnl3332.1jet.VV-warm.run
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2017_I1487277/fnl3332.1jet.VV-warm.run (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2017_I1487277/fnl3332.1jet.VV-warm.run (revision 1772)
@@ -0,0 +1,187 @@
+NNLOJET_RUNCARD
+VV-8TeV ! Job name id, must be less than 10 characters
+1jet ! Process name
+7000000 ! Number of events
+10 ! Number of iterations
+7 ! Seed number
+.true. ! Warmup
+.false. ! Production
+CT14nnlo ! PDF set
+0 ! PDF member
+antikt ! Jet algorithm, accepts 'kt', 'cam' or 'antikt'
+0.7d0 ! Rcut
+.false. ! exclusive
+0 ! Heavy particle decay type
+.1e-7 ! Technical cutoff y0
+.false. ! angular averaging of the phase space, default to true
+2 ! Virtual Integration method, use 2 if you're not sure
+all ! RR a/b region flag. Accepts 'a','b' or 'all'.
+0 ! set to zero for MC, 2 for point test
+.false. ! print max weight flag
+.true. ! momentum mapping and PDF storage flag
+.true. ! colour sampling flag
+.false. ! explicit pole check flag, stops integration when set to true
+
+PHYSICAL_PARAMETERS
+8000d0 ! roots
+125d0 ! Mass of the Higgs Boson
+0.004029643852d0 ! Width of the Higgs Boson
+91.1876d0 ! Mass of the Z Boson
+2.4952d0 ! Width of the Z Boson
+80.398d0 ! Mass of the W Boson
+2.1054d0 ! Width of the W Boson
+173.2d0 ! Mass of the Top Quark
+1.41d0 ! Width of the Top Quark
+4.18d0 ! Mass of the Bottom Quark
+0d0 ! Width of the Bottom Quark
+1.275d0 ! Mass of the Charm Quark
+0d0 ! Width of the Charm Quark
+
+! UNIT_PHASE
+
+SELECTORS
+ select jets_pt min = 21 max = 2500
+ select jets_abs_y max = 3.0
+ select njets min = 1
+END_SELECTORS
+
+
+
+HISTOGRAMS
+
+COMPOSITE > xptj0_y1 [21,24,28,32,37,43,49,56,64,74,84,97,114,133,153,174,196,220,245,272,300,330,362,395,430,468,507,548,592,638,686,737,790,846,905,967,1032,1101,1172,1248,1327,1410,1497,1588,1784,2116,2500]
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y2 [21,24,28,32,37,43,49,56,64,74,84,97,114,133,153,174,196,220,245,272,300,330,362,395,430,468,507,548,592,638,686,737,790,846,905,967,1032,1101,1172,1248,1327,1410,1497,1588,1784,2116,2500]
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y3 [21,24,28,32,37,43,49,56,64,74,84,97,114,133,153,174,196,220,245,272,300,330,362,395,430,468,507,548,592,638,686,737,790,846,905,967,1032,1101,1172,1248,1327,1410,1497,1588,1784,2116]
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y4 [21,24,28,32,37,43,49,56,64,74,84,97,114,133,153,174,196,220,245,272,300,330,362,395,430,468,507,548,592,638,686,737,790,846,905,967,1032,1101,1172,1248,1327,1410]
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y5 [21,24,28,32,37,43,49,56,64,74,84,97,114,133,153,174,196,220,245,272,300,330,362,395,430,468,507,548,592,638,686,737,790,846,905]
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y6 [21,24,28,32,37,43,49,56,64,74,84,97,114,133,153,174,196,220,245,272,300,330,362,395,430,468,507,548]
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=2.5 max=3.0
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=2.5 max=3.0
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=2.5 max=3.0
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=2.5 max=3.0
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+END_HISTOGRAMS
+
+SCALES
+ muf = ptj1 mur = ptj1
+END_SCALES
+
+!####### SYNTAX ######################
+!##
+!## REWEIGHT {observable-name}**{val_power}
+!##
+!#####################################
+
+! REWEIGHT ht_part**4
+! REWEIGHT ht_part**1.4 !# DB
+REWEIGHT ht_part**6.5 !# KR
+
+CHANNELS
+ VV
+END_CHANNELS
+
+SETUP
+END_SETUP
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2017_I1487277/fnl3332.1jet.R-fastprod.conf
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2017_I1487277/fnl3332.1jet.R-fastprod.conf (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2017_I1487277/fnl3332.1jet.R-fastprod.conf (revision 1772)
@@ -0,0 +1,21 @@
+[global]
+include = nnlojet-gc.conf
+
+[jobs]
+;jobs = 5 ; Max. # of jobs (truncated to module maximum), D=mod
+;wall time = 2:00 ; Requested wall time in hh[:mm[:ss]] (also used for proxy lifetime)
+
+[parameters] ; This section defines the parameter space
+repeat = 1 ; How many times each parameter space point should be sampled
+parameters = ( SEED , EVENTS )
+SEED = range( 200, 450 )
+SEED type = expr
+EVENTS = 8000000
+
+[UserTask]
+executable = fnlo-run-nnlojet.csh
+arguments = fnl3332 1jet R fastprod
+subst files = fnl3332.1jet.R-fastprod.run
+; NNLOJET production run
+input files = fnlo-run-nnlojet.pl fastNLO_v23_source_nnlojet_cvmfs.csh fnl3332.1jet.R-fastprod.run 1jet.R-8TeV.y.1e-7.vRa jet.R-8TeV.ptji_incl_y1.wrm jet.R-8TeV.ptji_incl_y2.wrm jet.R-8TeV.ptji_incl_y3.wrm jet.R-8TeV.ptji_incl_y4.wrm jet.R-8TeV.ptji_incl_y5.wrm jet.R-8TeV.ptji_incl_y6.wrm jet.8TeV.ptji_incl_y1.wrm jet.8TeV.ptji_incl_y2.wrm jet.8TeV.ptji_incl_y3.wrm jet.8TeV.ptji_incl_y4.wrm jet.8TeV.ptji_incl_y5.wrm jet.8TeV.ptji_incl_y6.wrm
+output files = fnl3332.1jet.R-fastprod.tar.gz
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2017_I1487277/fnl3332.1jet.R-fastwarm.conf
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2017_I1487277/fnl3332.1jet.R-fastwarm.conf (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2017_I1487277/fnl3332.1jet.R-fastwarm.conf (revision 1772)
@@ -0,0 +1,21 @@
+[global]
+include = nnlojet-gc.conf
+
+[jobs]
+;jobs = 5 ; Max. # of jobs (truncated to module maximum), D=mod
+;wall time = 0:20 ; Requested wall time in hh[:mm[:ss]] (also used for proxy lifetime)
+
+[parameters] ; This section defines the parameter space
+repeat = 1 ; How many times each parameter space point should be sampled
+parameters = ( SEED , EVENTS )
+SEED = range( 200, 240 )
+SEED type = expr
+EVENTS = 4000000
+
+[UserTask]
+executable = fnlo-run-nnlojet.csh
+arguments = fnl3332 1jet R fastwarm
+subst files = fnl3332.1jet.R-fastwarm.run
+; NNLOJET Warm-up run
+input files = fnlo-run-nnlojet.pl fastNLO_v23_source_nnlojet_cvmfs.csh fnl3332.1jet.R-fastwarm.run 1jet.R-8TeV.y.1e-7.vRa
+output files = fnl3332.1jet.R-fastwarm.tar.gz
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2017_I1487277/fnl3332.1jet.R-warm.run
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2017_I1487277/fnl3332.1jet.R-warm.run (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2017_I1487277/fnl3332.1jet.R-warm.run (revision 1772)
@@ -0,0 +1,187 @@
+NNLOJET_RUNCARD
+R-8TeV ! Job name id, must be less than 10 characters
+1jet ! Process name
+40000000 ! Number of events
+10 ! Number of iterations
+2 ! Seed number
+.true. ! Warmup
+.false. ! Production
+CT14nnlo ! PDF set
+0 ! PDF member
+antikt ! Jet algorithm, accepts 'kt', 'cam' or 'antikt'
+0.7d0 ! Rcut
+.false. ! exclusive
+0 ! Heavy particle decay type
+.1e-7 ! Technical cutoff y0
+.false. ! angular averaging of the phase space, default to true
+2 ! Virtual Integration method, use 2 if you're not sure
+all ! RR a/b region flag. Accepts 'a','b' or 'all'.
+0 ! set to zero for MC, 2 for point test
+.false. ! print max weight flag
+.true. ! momentum mapping and PDF storage flag
+.true. ! colour sampling flag
+.false. ! explicit pole check flag, stops integration when set to true
+
+PHYSICAL_PARAMETERS
+8000d0 ! roots
+125d0 ! Mass of the Higgs Boson
+0.004029643852d0 ! Width of the Higgs Boson
+91.1876d0 ! Mass of the Z Boson
+2.4952d0 ! Width of the Z Boson
+80.398d0 ! Mass of the W Boson
+2.1054d0 ! Width of the W Boson
+173.2d0 ! Mass of the Top Quark
+1.41d0 ! Width of the Top Quark
+4.18d0 ! Mass of the Bottom Quark
+0d0 ! Width of the Bottom Quark
+1.275d0 ! Mass of the Charm Quark
+0d0 ! Width of the Charm Quark
+
+! UNIT_PHASE
+
+SELECTORS
+ select jets_pt min = 21 max = 2500
+ select jets_abs_y max = 3.0
+ select njets min = 1
+END_SELECTORS
+
+
+
+HISTOGRAMS
+
+COMPOSITE > xptj0_y1 [21,24,28,32,37,43,49,56,64,74,84,97,114,133,153,174,196,220,245,272,300,330,362,395,430,468,507,548,592,638,686,737,790,846,905,967,1032,1101,1172,1248,1327,1410,1497,1588,1784,2116,2500]
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y2 [21,24,28,32,37,43,49,56,64,74,84,97,114,133,153,174,196,220,245,272,300,330,362,395,430,468,507,548,592,638,686,737,790,846,905,967,1032,1101,1172,1248,1327,1410,1497,1588,1784,2116,2500]
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y3 [21,24,28,32,37,43,49,56,64,74,84,97,114,133,153,174,196,220,245,272,300,330,362,395,430,468,507,548,592,638,686,737,790,846,905,967,1032,1101,1172,1248,1327,1410,1497,1588,1784,2116]
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y4 [21,24,28,32,37,43,49,56,64,74,84,97,114,133,153,174,196,220,245,272,300,330,362,395,430,468,507,548,592,638,686,737,790,846,905,967,1032,1101,1172,1248,1327,1410]
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y5 [21,24,28,32,37,43,49,56,64,74,84,97,114,133,153,174,196,220,245,272,300,330,362,395,430,468,507,548,592,638,686,737,790,846,905]
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y6 [21,24,28,32,37,43,49,56,64,74,84,97,114,133,153,174,196,220,245,272,300,330,362,395,430,468,507,548]
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=2.5 max=3.0
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=2.5 max=3.0
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=2.5 max=3.0
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=2.5 max=3.0
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+END_HISTOGRAMS
+
+SCALES
+ muf = ptj1 mur = ptj1
+END_SCALES
+
+!####### SYNTAX ######################
+!##
+!## REWEIGHT {observable-name}**{val_power}
+!##
+!#####################################
+
+! REWEIGHT ht_part**4
+! REWEIGHT ht_part**1.4 !# DB
+REWEIGHT ht_part**6.5 !# KR
+
+CHANNELS
+ R
+END_CHANNELS
+
+SETUP
+END_SETUP
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2017_I1487277/fnl3332.1jet.RRb-fastprod.run
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2017_I1487277/fnl3332.1jet.RRb-fastprod.run (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2017_I1487277/fnl3332.1jet.RRb-fastprod.run (revision 1772)
@@ -0,0 +1,193 @@
+NNLOJET_RUNCARD
+RRb-8TeV ! Job name id, must be less than 10 characters
+1jet ! Process name
+@EVENTS@ ! Number of events
+1 ! Number of iterations
+@SEED@ ! Seed number
+.false. ! Warmup
+.true. ! Production
+CT14nnlo ! PDF set
+0 ! PDF member
+antikt ! Jet algorithm, accepts 'kt', 'cam' or 'antikt'
+0.7d0 ! Rcut
+.false. ! exclusive
+0 ! Heavy particle decay type
+.1e-7 ! Technical cutoff y0
+.false. ! angular averaging of the phase space, default to true
+2 ! Virtual Integration method, use 2 if you're not sure
+b ! RR a/b region flag. Accepts 'a','b' or 'all'.
+0 ! set to zero for MC, 2 for point test
+.false. ! print max weight flag
+.true. ! momentum mapping and PDF storage flag
+.true. ! colour sampling flag
+.false. ! explicit pole check flag, stops integration when set to true
+
+PHYSICAL_PARAMETERS
+8000d0 ! roots
+125d0 ! Mass of the Higgs Boson
+0.004029643852d0 ! Width of the Higgs Boson
+91.1876d0 ! Mass of the Z Boson
+2.4952d0 ! Width of the Z Boson
+80.398d0 ! Mass of the W Boson
+2.1054d0 ! Width of the W Boson
+173.2d0 ! Mass of the Top Quark
+1.41d0 ! Width of the Top Quark
+4.18d0 ! Mass of the Bottom Quark
+0d0 ! Width of the Bottom Quark
+1.275d0 ! Mass of the Charm Quark
+0d0 ! Width of the Charm Quark
+
+! UNIT_PHASE
+
+SELECTORS
+ select jets_pt min = 21 max = 2500
+ select jets_abs_y max = 3.0
+ select njets min = 1
+END_SELECTORS
+
+
+
+HISTOGRAMS
+
+COMPOSITE > xptj0_y1 [21,24,28,32,37,43,49,56,64,74,84,97,114,133,153,174,196,220,245,272,300,330,362,395,430,468,507,548,592,638,686,737,790,846,905,967,1032,1101,1172,1248,1327,1410,1497,1588,1784,2116,2500] grid=ptji_incl_y1.fast
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y2 [21,24,28,32,37,43,49,56,64,74,84,97,114,133,153,174,196,220,245,272,300,330,362,395,430,468,507,548,592,638,686,737,790,846,905,967,1032,1101,1172,1248,1327,1410,1497,1588,1784,2116,2500] grid=ptji_incl_y2.fast
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y3 [21,24,28,32,37,43,49,56,64,74,84,97,114,133,153,174,196,220,245,272,300,330,362,395,430,468,507,548,592,638,686,737,790,846,905,967,1032,1101,1172,1248,1327,1410,1497,1588,1784,2116] grid=ptji_incl_y3.fast
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y4 [21,24,28,32,37,43,49,56,64,74,84,97,114,133,153,174,196,220,245,272,300,330,362,395,430,468,507,548,592,638,686,737,790,846,905,967,1032,1101,1172,1248,1327,1410] grid=ptji_incl_y4.fast
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y5 [21,24,28,32,37,43,49,56,64,74,84,97,114,133,153,174,196,220,245,272,300,330,362,395,430,468,507,548,592,638,686,737,790,846,905] grid=ptji_incl_y5.fast
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y6 [21,24,28,32,37,43,49,56,64,74,84,97,114,133,153,174,196,220,245,272,300,330,362,395,430,468,507,548] grid=ptji_incl_y6.fast
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=2.5 max=3.0
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=2.5 max=3.0
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=2.5 max=3.0
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=2.5 max=3.0
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+END_HISTOGRAMS
+
+SCALES
+ muf = ptj1 mur = ptj1
+ muf = 2.718281828 mur = 2.718281828
+ muf = 4.48168907 mur = 4.48168907
+ muf = 4.48168907 mur = 2.718281828
+ muf = 2.718281828 mur = 4.48168907
+ muf = 12.18249396 mur = 2.718281828
+ muf = 2.718281828 mur = 12.18249396
+END_SCALES
+
+!####### SYNTAX ######################
+!##
+!## REWEIGHT {observable-name}**{val_power}
+!##
+!#####################################
+
+! REWEIGHT ht_part**4
+! REWEIGHT ht_part**1.4 !# DB
+REWEIGHT ht_part**6.5 !# KR
+
+CHANNELS
+ RR
+END_CHANNELS
+
+SETUP
+END_SETUP
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2017_I1487277/fnl3332.1jet.V-fastprod.conf
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2017_I1487277/fnl3332.1jet.V-fastprod.conf (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2017_I1487277/fnl3332.1jet.V-fastprod.conf (revision 1772)
@@ -0,0 +1,21 @@
+[global]
+include = nnlojet-gc.conf
+
+[jobs]
+;jobs = 5 ; Max. # of jobs (truncated to module maximum), D=mod
+;wall time = 2:00 ; Requested wall time in hh[:mm[:ss]] (also used for proxy lifetime)
+
+[parameters] ; This section defines the parameter space
+repeat = 1 ; How many times each parameter space point should be sampled
+parameters = ( SEED , EVENTS )
+SEED = range( 300, 365 )
+SEED type = expr
+EVENTS = 30000000
+
+[UserTask]
+executable = fnlo-run-nnlojet.csh
+arguments = fnl3332 1jet V fastprod
+subst files = fnl3332.1jet.V-fastprod.run
+; NNLOJET production run
+input files = fnlo-run-nnlojet.pl fastNLO_v23_source_nnlojet_cvmfs.csh fnl3332.1jet.V-fastprod.run 1jet.V-8TeV.y.1e-7.vBa jet.V-8TeV.ptji_incl_y1.wrm jet.V-8TeV.ptji_incl_y2.wrm jet.V-8TeV.ptji_incl_y3.wrm jet.V-8TeV.ptji_incl_y4.wrm jet.V-8TeV.ptji_incl_y5.wrm jet.V-8TeV.ptji_incl_y6.wrm jet.8TeV.ptji_incl_y1.wrm jet.8TeV.ptji_incl_y2.wrm jet.8TeV.ptji_incl_y3.wrm jet.8TeV.ptji_incl_y4.wrm jet.8TeV.ptji_incl_y5.wrm jet.8TeV.ptji_incl_y6.wrm
+output files = fnl3332.1jet.V-fastprod.tar.gz
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2017_I1487277/fnl3332.1jet.RV-fastprod.run
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2017_I1487277/fnl3332.1jet.RV-fastprod.run (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2017_I1487277/fnl3332.1jet.RV-fastprod.run (revision 1772)
@@ -0,0 +1,193 @@
+NNLOJET_RUNCARD
+RV-8TeV ! Job name id, must be less than 10 characters
+1jet ! Process name
+@EVENTS@ ! Number of events
+1 ! Number of iterations
+@SEED@ ! Seed number
+.false. ! Warmup
+.true. ! Production
+CT14nnlo ! PDF set
+0 ! PDF member
+antikt ! Jet algorithm, accepts 'kt', 'cam' or 'antikt'
+0.7d0 ! Rcut
+.false. ! exclusive
+0 ! Heavy particle decay type
+.1e-7 ! Technical cutoff y0
+.false. ! angular averaging of the phase space, default to true
+2 ! Virtual Integration method, use 2 if you're not sure
+all ! RR a/b region flag. Accepts 'a','b' or 'all'.
+0 ! set to zero for MC, 2 for point test
+.false. ! print max weight flag
+.true. ! momentum mapping and PDF storage flag
+.true. ! colour sampling flag
+.false. ! explicit pole check flag, stops integration when set to true
+
+PHYSICAL_PARAMETERS
+8000d0 ! roots
+125d0 ! Mass of the Higgs Boson
+0.004029643852d0 ! Width of the Higgs Boson
+91.1876d0 ! Mass of the Z Boson
+2.4952d0 ! Width of the Z Boson
+80.398d0 ! Mass of the W Boson
+2.1054d0 ! Width of the W Boson
+173.2d0 ! Mass of the Top Quark
+1.41d0 ! Width of the Top Quark
+4.18d0 ! Mass of the Bottom Quark
+0d0 ! Width of the Bottom Quark
+1.275d0 ! Mass of the Charm Quark
+0d0 ! Width of the Charm Quark
+
+! UNIT_PHASE
+
+SELECTORS
+ select jets_pt min = 21 max = 2500
+ select jets_abs_y max = 3.0
+ select njets min = 1
+END_SELECTORS
+
+
+
+HISTOGRAMS
+
+COMPOSITE > xptj0_y1 [21,24,28,32,37,43,49,56,64,74,84,97,114,133,153,174,196,220,245,272,300,330,362,395,430,468,507,548,592,638,686,737,790,846,905,967,1032,1101,1172,1248,1327,1410,1497,1588,1784,2116,2500] grid=ptji_incl_y1.fast
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y2 [21,24,28,32,37,43,49,56,64,74,84,97,114,133,153,174,196,220,245,272,300,330,362,395,430,468,507,548,592,638,686,737,790,846,905,967,1032,1101,1172,1248,1327,1410,1497,1588,1784,2116,2500] grid=ptji_incl_y2.fast
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y3 [21,24,28,32,37,43,49,56,64,74,84,97,114,133,153,174,196,220,245,272,300,330,362,395,430,468,507,548,592,638,686,737,790,846,905,967,1032,1101,1172,1248,1327,1410,1497,1588,1784,2116] grid=ptji_incl_y3.fast
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y4 [21,24,28,32,37,43,49,56,64,74,84,97,114,133,153,174,196,220,245,272,300,330,362,395,430,468,507,548,592,638,686,737,790,846,905,967,1032,1101,1172,1248,1327,1410] grid=ptji_incl_y4.fast
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y5 [21,24,28,32,37,43,49,56,64,74,84,97,114,133,153,174,196,220,245,272,300,330,362,395,430,468,507,548,592,638,686,737,790,846,905] grid=ptji_incl_y5.fast
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y6 [21,24,28,32,37,43,49,56,64,74,84,97,114,133,153,174,196,220,245,272,300,330,362,395,430,468,507,548] grid=ptji_incl_y6.fast
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=2.5 max=3.0
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=2.5 max=3.0
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=2.5 max=3.0
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=2.5 max=3.0
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+END_HISTOGRAMS
+
+SCALES
+ muf = ptj1 mur = ptj1
+ muf = 2.718281828 mur = 2.718281828
+ muf = 4.48168907 mur = 4.48168907
+ muf = 4.48168907 mur = 2.718281828
+ muf = 2.718281828 mur = 4.48168907
+ muf = 12.18249396 mur = 2.718281828
+ muf = 2.718281828 mur = 12.18249396
+END_SCALES
+
+!####### SYNTAX ######################
+!##
+!## REWEIGHT {observable-name}**{val_power}
+!##
+!#####################################
+
+! REWEIGHT ht_part**4
+! REWEIGHT ht_part**1.4 !# DB
+REWEIGHT ht_part**6.5 !# KR
+
+CHANNELS
+ RV
+END_CHANNELS
+
+SETUP
+END_SETUP
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2017_I1487277/fnl3332.1jet.V-fastwarm.conf
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2017_I1487277/fnl3332.1jet.V-fastwarm.conf (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2017_I1487277/fnl3332.1jet.V-fastwarm.conf (revision 1772)
@@ -0,0 +1,21 @@
+[global]
+include = nnlojet-gc.conf
+
+[jobs]
+;jobs = 5 ; Max. # of jobs (truncated to module maximum), D=mod
+;wall time = 0:20 ; Requested wall time in hh[:mm[:ss]] (also used for proxy lifetime)
+
+[parameters] ; This section defines the parameter space
+repeat = 1 ; How many times each parameter space point should be sampled
+parameters = ( SEED , EVENTS )
+SEED = range( 300, 340 )
+SEED type = expr
+EVENTS = 4000000
+
+[UserTask]
+executable = fnlo-run-nnlojet.csh
+arguments = fnl3332 1jet V fastwarm
+subst files = fnl3332.1jet.V-fastwarm.run
+; NNLOJET Warm-up run
+input files = fnlo-run-nnlojet.pl fastNLO_v23_source_nnlojet_cvmfs.csh fnl3332.1jet.V-fastwarm.run 1jet.V-8TeV.y.1e-7.vBa
+output files = fnl3332.1jet.V-fastwarm.tar.gz
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2017_I1487277/fnl3332.1jet.V-warm.run
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2017_I1487277/fnl3332.1jet.V-warm.run (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2017_I1487277/fnl3332.1jet.V-warm.run (revision 1772)
@@ -0,0 +1,187 @@
+NNLOJET_RUNCARD
+V-8TeV ! Job name id, must be less than 10 characters
+1jet ! Process name
+60000000 ! Number of events
+10 ! Number of iterations
+3 ! Seed number
+.true. ! Warmup
+.false. ! Production
+CT14nnlo ! PDF set
+0 ! PDF member
+antikt ! Jet algorithm, accepts 'kt', 'cam' or 'antikt'
+0.7d0 ! Rcut
+.false. ! exclusive
+0 ! Heavy particle decay type
+.1e-7 ! Technical cutoff y0
+.false. ! angular averaging of the phase space, default to true
+2 ! Virtual Integration method, use 2 if you're not sure
+all ! RR a/b region flag. Accepts 'a','b' or 'all'.
+0 ! set to zero for MC, 2 for point test
+.false. ! print max weight flag
+.true. ! momentum mapping and PDF storage flag
+.true. ! colour sampling flag
+.false. ! explicit pole check flag, stops integration when set to true
+
+PHYSICAL_PARAMETERS
+8000d0 ! roots
+125d0 ! Mass of the Higgs Boson
+0.004029643852d0 ! Width of the Higgs Boson
+91.1876d0 ! Mass of the Z Boson
+2.4952d0 ! Width of the Z Boson
+80.398d0 ! Mass of the W Boson
+2.1054d0 ! Width of the W Boson
+173.2d0 ! Mass of the Top Quark
+1.41d0 ! Width of the Top Quark
+4.18d0 ! Mass of the Bottom Quark
+0d0 ! Width of the Bottom Quark
+1.275d0 ! Mass of the Charm Quark
+0d0 ! Width of the Charm Quark
+
+! UNIT_PHASE
+
+SELECTORS
+ select jets_pt min = 21 max = 2500
+ select jets_abs_y max = 3.0
+ select njets min = 1
+END_SELECTORS
+
+
+
+HISTOGRAMS
+
+COMPOSITE > xptj0_y1 [21,24,28,32,37,43,49,56,64,74,84,97,114,133,153,174,196,220,245,272,300,330,362,395,430,468,507,548,592,638,686,737,790,846,905,967,1032,1101,1172,1248,1327,1410,1497,1588,1784,2116,2500]
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y2 [21,24,28,32,37,43,49,56,64,74,84,97,114,133,153,174,196,220,245,272,300,330,362,395,430,468,507,548,592,638,686,737,790,846,905,967,1032,1101,1172,1248,1327,1410,1497,1588,1784,2116,2500]
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y3 [21,24,28,32,37,43,49,56,64,74,84,97,114,133,153,174,196,220,245,272,300,330,362,395,430,468,507,548,592,638,686,737,790,846,905,967,1032,1101,1172,1248,1327,1410,1497,1588,1784,2116]
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y4 [21,24,28,32,37,43,49,56,64,74,84,97,114,133,153,174,196,220,245,272,300,330,362,395,430,468,507,548,592,638,686,737,790,846,905,967,1032,1101,1172,1248,1327,1410]
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y5 [21,24,28,32,37,43,49,56,64,74,84,97,114,133,153,174,196,220,245,272,300,330,362,395,430,468,507,548,592,638,686,737,790,846,905]
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y6 [21,24,28,32,37,43,49,56,64,74,84,97,114,133,153,174,196,220,245,272,300,330,362,395,430,468,507,548]
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=2.5 max=3.0
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=2.5 max=3.0
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=2.5 max=3.0
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=2.5 max=3.0
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+END_HISTOGRAMS
+
+SCALES
+ muf = ptj1 mur = ptj1
+END_SCALES
+
+!####### SYNTAX ######################
+!##
+!## REWEIGHT {observable-name}**{val_power}
+!##
+!#####################################
+
+! REWEIGHT ht_part**4
+! REWEIGHT ht_part**1.4 !# DB
+REWEIGHT ht_part**6.5 !# KR
+
+CHANNELS
+ V
+END_CHANNELS
+
+SETUP
+END_SETUP
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2017_I1487277/1jet.VV-8TeV.y.1e-7.vBa
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2017_I1487277/1jet.VV-8TeV.y.1e-7.vBa (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2017_I1487277/1jet.VV-8TeV.y.1e-7.vBa (revision 1772)
@@ -0,0 +1,132 @@
+
+ 13F9E8E15FF39144F3FAAE736CAFD823A3FB1E00571BD49453FB63335AD43CDFA
+3FBA0E98C1875BA53FBDC4895888DF7F3FC0A5670DBDE0A73FC258B6CD5B58603FC400C924678E2F
+3FC59F22ADE2BBB73FC735A68188D2843FC8C61CBC05E28C3FCA52BB607136843FCBD9AB822B7410
+3FCD60410508DA3B3FCEE27C8A490DCE3FD031F719849ED73FD0F164023B0A6B3FD1B13B76725722
+3FD2709F6F86F1F73FD3301080B55FE13FD3EF2DD1F047C73FD4ADCE8196CB233FD56C502F2C149F
+3FD62A49493EF0733FD6E7DA8DC93F513FD7A4BBFA1CEA583FD861188D4071083FD91C665550AEED
+3FD9D6777B2F308A3FDA8F06B1DBE1833FDB462B69C8CCC43FDBFBFC7EF1FD723FDCB017478BBA52
+3FDD61D0D43A6A853FDE114773422B3F3FDEBE73D908BEA83FDF68F2767B211D3FE00879FC8B9B6E
+3FE05B4A444371D13FE0ACD446145D563FE0FCFC5E8A88953FE14BA7C021644A3FE199051A365DA3
+3FE1E523575AEBEF3FE22FDF7BC9DFAA3FE2794950B5EEFC3FE2B97C2EBE76A33FE2F03892EF67F9
+3FE3263D1FA5A82E3FE35BAF4DD977F23FE399FA26A22D2E3FE3DDBD568C1D733FE4209B01FB8F1B
+3FE462929793E8843FE4A3AA6C99E8143FE4E3E08B9F6AA23FE52337881407AD3FE561C731B63028
+3FE59FA7A8DF16443FE5DCEB3EDB54CC3FE61984CF76CE253FE6557D2319073B3FE690E56DB1510A
+3FE6CBCB44F294C13FE70634A0585E373FE7401D4227842B3FE7799CE2340E833FE7B2AC134CFCBD
+3FE7EB83D82E6EEB3FE8241E11D98AE33FE85C78807C582C3FE894847857F5873FE8CC73E6AE36B4
+3FE9044B1F290DA73FE93C229F7830F83FE974038C2C9AAD3FE9AC0A7E5DE6B83FE9E436A10366B6
+3FEA1C7324BB2F483FEA54FA498101A93FEA8DD5A08163373FEAC70472F1871E3FEB00D3D66BB5CC
+3FEB3B440DCD52793FEB7659787A43973FEBB257E67176F73FEBEF50FA2F18393FEC2D466646CB2C
+3FEC6C9F4E4FF5933FECADB42EC935A93FECF0C2417C49373FED365DEEB8EDBD3FED7F2F0D3E8B75
+3FEDCBA5F4C75B193FEE1D0025C1EC9C3FEE77E1EE1B12113FEED3B9E58860DF3FEF57B2EADD889A
+3FF0000000000000
+
+ 23F3EF59AF0D048963F4AF450BE5E36753F52ACAF1932A7003F57C5DB3F88442A
+3F5D3B5BC222B4AD3F620C5E8FFED6F23F658AC170409B0B3F691915558E28563F6CB8A954A427E4
+3F703353660A13EC3F7212BECB52D3843F73FC4615F2C7033F75EECE1574BB1A3F77EC5602B5FE61
+3F79F2DE73DBF83E3F7C0582CB3E51E83F7E20E6E93D66423F8024127B9A75ED3F813D1BC4A5FDD4
+3F825DE7F040E9673F8382889CEB0CF83F84AD6A6201E9AB3F85DFD0960AB7063F8717BBAC549B46
+3F885706C9A252B43F899CD0FE9D501A3F8AE9686BD2364E3F8C3D02EC54480F3F8D97ECB2DFB431
+3F8EF9BBC96BA2023F90318F7F565DAB3F90EA230DB9C0B73F91A69C1C77AEA13F9266E13DCCF516
+3F932CC3285673103F93F627E7F704773F94C296C039E9683F9596DA6C68850B3F966D8071CA6796
+3F9748B4E958B1643F9829DBF44625823F990F9B02B3E15E3F99FAD3A1A8A1C33F9AEB8238DA1B0E
+3F9BE233DA0909DC3F9CDEFC8A473A773F9DE1CF81415D403F9EEACFB6DB8AF13F9FFA83E292838A
+3FA08884D777E9D83FA117170872C0C23FA1A96E8D24179A3FA23F97C8C04A163FA2D9946D374E13
+3FA3780FACA40BE23FA41B2BE5992B0C3FA4C24468FF6E543FA56EFAF66727CB3FA61FD70183D69E
+3FA6D5BE0AAE46223FA791DB910BEAD53FA853A1F91517FF3FA91B45E508C7F43FA9E9625D13B1CA
+3FAABDDF222025543FAB98F1C10A30433FAC7C14584A90883FAD66C9AF6401643FAE59FCC5E2040E
+3FAF55D571EBEAA23FB02D2D6C02248B3FB0B5B24ABB04C03FB1426E7D8285013FB1D5DB57A48FB4
+3FB26F647AE442C83FB3103B1D13CF333FB3B7ABEC76F86B3FB46809030BF6523FB521DBED46E3CD
+3FB5E464B7838C003FB6B1D86A0C2E823FB78BC6335B724D3FB8725BCB0E5BEA3FB9683B10623D8A
+3FBA6F79723039F53FBB8A12A9E90EB33FBCBB4DC5DAD5A43FBE067BD748AC913FBF70F2D69DA853
+3FC08022DBA88C433FC15F34C2E7F4D63FC25A3B743F77A23FC37A6B6FA572103FC4CA59E852651E
+3FC660923731538A3FC85FB95E64DEC53FCB0C47F261C4A33FCF378DD2636D4E3FD3F8CF9C88BCF6
+3FF0000000000000
+
+ 33FBEF037AC65EEC03FC45A4B8B17F5D03FC716E41ED1F6D03FC95E449170C197
+3FCB451A95019D3B3FCCEECFBAD025723FCE6D4E61D96AB03FCFCD7C57E63D423FD08A8B48A3B9DB
+3FD123E66E9021B13FD1B1E94D3B6B763FD21BC90BCD31713FD282063DEFC6FD3FD2E5396ABB4150
+3FD34B976A29298E3FD3C541EE27A9CC3FD43ABA4EA80C273FD4ACB748CE55B73FD51B7D0293C0C8
+3FD58750DC7EAECD3FD5F0ACC6760B793FD657AA7BB6954E3FD6BCABD792AE973FD71FA1A7B228CB
+3FD78119C6FFF4773FD7E0EED441D5263FD83F6E1A7C32113FD89C742F4667DF3FD8F7DB7F4699E4
+3FD9525B590C9C083FD9ABED4C0B7EE63FDA045F0BC16BAF3FDA5BDD3FCC6E2C3FDAB2AA882601CC
+3FDB08C7C5F2626A3FDB5DE251924E9A3FDBB292A1470D923FDC06C9142AB8B23FDC5A5FCA7C527E
+3FDCAD6C187FE39B3FDD00024E602BBC3FDD523AF45EEC673FDDA435C7B768543FDDF5F2A4802137
+3FDE477B4C0234963FDE98B136AB01EA3FDEE9B79B98C9593FDF3ABE93A154FE3FDF8BD4BA46AD9F
+3FDFDCF32B601E2B3FE016EFD77A5A343FE03F745865DC473FE067FFCF1AF1103FE0909D2191C4B7
+3FE0B96C7D6C4F6A3FE0E2561F6800A63FE10B574C11FECA3FE1346C8A59BEC43FE15D9B10E5CB44
+3FE186F23684DD283FE1B08305BECCD03FE1DA61C717B84A3FE20480CE94E4B23FE22EE06D2F46C4
+3FE2599BAC0C52B63FE284B2977005F13FE2B020D4D497933FE2DBD13BA96DB33FE30811DC61765B
+3FE334B24613F1583FE361D73EB939A33FE38F8F943AA9A23FE3BDEA54762DCE3FE3ECD35DC2E19B
+3FE41C7E7A77986D3FE44CDA1C27C1C93FE47DCCF67C4C9D3FE4B00A1830B3783FE4E2F1CF9E44EF
+3FE5171AE35457E43FE54CA2F2C34F063FE5835F3A99099A3FE5BB812EA05A9B3FE5F54C073ACB6E
+3FE630C95CEFCD0F3FE66E2BBB019AEA3FE6AE0AD414B9713FE6F060255187753FE735C4EC98BA3F
+3FE77EBD2E283AAB3FE7CBC9C75068AD3FE81DE970F301D83FE87618617AEDAC3FE8D6262DDAEA79
+3FE940C131306E7D3FE9B9D429EE2B613FEA4AFE8FF64AAE3FEAF9C0D684106D3FEC2C030BDE4C3F
+3FF0000000000000
+
+ 43F8E3C52D6D51D643F9E3A380180EA043FA6A1E52DE327743FAE412E5471E632
+3FB2D1CEF49A8AFC3FB697E69961BE4B3FBA5364871C80713FBE0FCC462B6DF93FC0E4FB52BF99D4
+3FC2C4C4CFF04A563FC49EF2CDA12E873FC67FA79B99C40A3FC85D207EB623433FCA35E34061598B
+3FCC13999861E9BA3FCDEF0D7CAC49CF3FCFC8A2A790E9253FD0D0CBBC77500B3FD1BD1BB44AE4E5
+3FD2A9E811E090453FD395FB3AF2F16B3FD4815E31A022AB3FD56D52F9B268B43FD65931E56797D1
+3FD743C46AD9DADE3FD82E4942126A473FD91873CC3AAA393FDA01AB7E74D49D3FDAE9E062089561
+3FDBD1684DD7086E3FDCB800F02BA2233FDD9E0538C78E4B3FDE8385BBF6CD4C3FDF67EC411B7D4A
+3FE0259F391EF7E03FE0967A2EF3FD343FE106B29CD8FFBB3FE176702C9C76423FE1E58995C3CDC8
+3FE253EAF3B5020F3FE2C1843318394D3FE32E12B47821EE3FE399AA5E1CD5D43FE404A83B9D8516
+3FE46E5B7FAF67A13FE4D6F8237FF9963FE53E99F40040333FE5A4C771C215583FE609A367807358
+3FE66D02EB8217F73FE6CF02F1A3F8353FE72F907FCE05B83FE78E99794242CD3FE7EC194EDAF23F
+3FE8481F457CE3723FE8A2654B7707F03FE8FABA704DE0923FE95109EA7D58443FE9A56F52CDB83B
+3FE9F7EB59FD03FE3FEA48575A38E6913FEA96BD3163A2CB3FEAE2FC2B8D6E683FEB2D201B88A77F
+3FEB750A134D116D3FEBBAA6C3B5708B3FEBFDEB0F2BCFA13FEC3EDD06F7762A3FEC7D6FAA531874
+3FECB993A2779F9D3FECF367655A0FF93FED2AD8F5AD15643FED5FF908C892883FED92CEF7590B7E
+3FEDC364CEDFB32B3FEDF1A089213BEB3FEE1D98F7F640AA3FEE476195539BF83FEE6F07EA0701CE
+3FEE94840A8ECCF03FEEB7E26AD76D963FEED92E4AB190693FEEF87DE1BE1D203FEF15E0093FF3F6
+3FEF3159C0584BC33FEF4AF97B23FE913FEF62E70007BFEB3FEF790EBAD7B73C3FEF8D74B5068498
+3FEFA04E5DD01ABC3FEFB16EC39F689A3FEFBDD0FD1A5C6E3FEFC8DB872020393FEFD3141F7D1F94
+3FEFDC4AF325D3343FEFE6B06E3EF46D3FEFEFF802887E0A3FEFF77DE70D3EFB3FEFFC2FB3990CB9
+3FF0000000000000
+
+ 53F8EFFF6C021D9BA3F9E2D562151812C3FA6CDE32D7881573FAE4E3A99AB27B1
+3FB2EB5163D0B70B3FB6AE55FFE7A3043FBA6C1FA27E30A73FBE2BD1CAF1DE663FC0F38364EAFF25
+3FC2D20966FCF63B3FC4AF51C4FE4E1A3FC68C4A5EF75A543FC868577626B44B3FCA453902C785A7
+3FCC2034D707D9063FCDFACA7FE5CFEC3FCFD515E8284AE83FD0D7DFC77574C73FD1C51C9F03E306
+3FD2B0A32009ECB83FD39C5D6023A8773FD4880CDCDD93B83FD572A4202B84153FD65D1F9FBFADF9
+3FD74715DCFFF2AC3FD830EEA13CF5283FD91985FB2C590A3FDA014224185C713FDAE8950A18A577
+3FDBCF1D017C50943FDCB4EBB390673C3FDD99ECA68D13783FDE7E1CC0679F573FDF60B866319146
+3FE020F4BA9F21813FE091344E6523FA3FE100E431C9F3933FE16FC09DAB03623FE1DDF8815E291E
+3FE24B3CEB129AF83FE2B7B4A18F0E7F3FE323458EDEAC773FE38DFA74CAD05A3FE3F7A870801856
+3FE46056122F1EA73FE4C802CDCCB7083FE52E8DD2D558AF3FE593BD9E270FE13FE5F7A9AD466869
+3FE65A5EF62EE8353FE6BBA3030D9A093FE71B6F3CA0327C3FE779B5AB922AF13FE7D679561DC73D
+3FE831BFB62F94F73FE88B778AB60A1B3FE8D8716CCD9D7F3FE91ABFFBFC9C103FE95BE3F794E47D
+3FE99B9AD0EC7C193FE9E69FFD6CE53E3FEA36688FC458743FEA8424A2541CE13FEACFEA107A57AD
+3FEB198614D069153FEB6114CEF8C4EF3FEBA67E1A841F003FEBE9A9DE5A6E923FEC2AB6870EE5C5
+3FEC697AFFC8BDD23FECA5F4307D23E63FECE021CC5B6FAC3FED18063263DD813FED4DB15CFCD022
+3FED81302528BBA83FEDB25A3D90964B3FEDE15385ECF99F3FEE0E0B90E1883A3FEE38AB811296EB
+3FEE61165598346A3FEE878CECAA65483FEEABE6512BEDA93FEECE31DF7245B23FEEEE893D1D1808
+3FEF0CD94A623B5C3FEF294795463C013FEF43E7C20D777C3FEF5CD4E0E3C2493FEF73C229A75BD1
+3FEF88F8687C676D3FEF9C963B54CE313FEFAE72D4FC0DDF3FEFBEA07A2DDCA23FEFCD1056AEFB2C
+3FEFDA2513D369D33FEFE5237CC9C3843FEFEEF2D73744253FEFF7083C5D69F73FEFFBF29B614A40
+3FF0000000000000
+
+ 63F847AE147AE14803F947AE147AE14803F9EB851EB851EC03FA47AE147AE1480
+3FA99999999999A03FAEB851EB851EC03FB1EB851EB851F03FB47AE147AE14803FB70A3D70A3D710
+3FB99999999999A03FBC28F5C28F5C303FBEB851EB851EC03FC0A3D70A3D70A83FC1EB851EB851F0
+3FC33333333333383FC47AE147AE14803FC5C28F5C28F5C83FC70A3D70A3D7103FC851EB851EB858
+3FC99999999999A03FCAE147AE147AE83FCC28F5C28F5C303FCD70A3D70A3D783FCEB851EB851EC0
+3FD00000000000043FD0A3D70A3D70A83FD147AE147AE14C3FD1EB851EB851F03FD28F5C28F5C294
+3FD33333333333383FD3D70A3D70A3DC3FD47AE147AE14803FD51EB851EB85243FD5C28F5C28F5C8
+3FD666666666666C3FD70A3D70A3D7103FD7AE147AE147B43FD851EB851EB8583FD8F5C28F5C28FC
+3FD99999999999A03FDA3D70A3D70A443FDAE147AE147AE83FDB851EB851EB8C3FDC28F5C28F5C30
+3FDCCCCCCCCCCCD43FDD70A3D70A3D783FDE147AE147AE1C3FDEB851EB851EC03FDF5C28F5C28F64
+3FE00000000000043FE051EB851EB8563FE0A3D70A3D70A83FE0F5C28F5C28FA3FE147AE147AE14C
+3FE199999999999E3FE1EB851EB851F03FE23D70A3D70A423FE28F5C28F5C2943FE2E147AE147AE6
+3FE33333333333383FE3851EB851EB8A3FE3D70A3D70A3DC3FE428F5C28F5C2E3FE47AE147AE1480
+3FE4CCCCCCCCCCD23FE51EB851EB85243FE570A3D70A3D763FE5C28F5C28F5C83FE6147AE147AE1A
+3FE666666666666C3FE6B851EB851EBE3FE70A3D70A3D7103FE75C28F5C28F623FE7AE147AE147B4
+3FE80000000000063FE851EB851EB8583FE8A3D70A3D70AA3FE8F5C28F5C28FC3FE947AE147AE14E
+3FE99999999999A03FE9EB851EB851F23FEA3D70A3D70A443FEA8F5C28F5C2963FEAE147AE147AE8
+3FEB33333333333A3FEB851EB851EB8C3FEBD70A3D70A3DE3FEC28F5C28F5C303FEC7AE147AE1482
+3FECCCCCCCCCCCD43FED1EB851EB85263FED70A3D70A3D773FEDC28F5C28F5C93FEE147AE147AE1B
+3FEE66666666666D3FEEB851EB851EBF3FEF0A3D70A3D7113FEF5C28F5C28F633FEFAE147AE147B5
+3FF0000000000000
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2017_I1487277/fnl3332.1jet.VV-fastprod.run
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2017_I1487277/fnl3332.1jet.VV-fastprod.run (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2017_I1487277/fnl3332.1jet.VV-fastprod.run (revision 1772)
@@ -0,0 +1,193 @@
+NNLOJET_RUNCARD
+VV-8TeV ! Job name id, must be less than 10 characters
+1jet ! Process name
+@EVENTS@ ! Number of events
+1 ! Number of iterations
+@SEED@ ! Seed number
+.false. ! Warmup
+.true. ! Production
+CT14nnlo ! PDF set
+0 ! PDF member
+antikt ! Jet algorithm, accepts 'kt', 'cam' or 'antikt'
+0.7d0 ! Rcut
+.false. ! exclusive
+0 ! Heavy particle decay type
+.1e-7 ! Technical cutoff y0
+.false. ! angular averaging of the phase space, default to true
+2 ! Virtual Integration method, use 2 if you're not sure
+all ! RR a/b region flag. Accepts 'a','b' or 'all'.
+0 ! set to zero for MC, 2 for point test
+.false. ! print max weight flag
+.true. ! momentum mapping and PDF storage flag
+.true. ! colour sampling flag
+.false. ! explicit pole check flag, stops integration when set to true
+
+PHYSICAL_PARAMETERS
+8000d0 ! roots
+125d0 ! Mass of the Higgs Boson
+0.004029643852d0 ! Width of the Higgs Boson
+91.1876d0 ! Mass of the Z Boson
+2.4952d0 ! Width of the Z Boson
+80.398d0 ! Mass of the W Boson
+2.1054d0 ! Width of the W Boson
+173.2d0 ! Mass of the Top Quark
+1.41d0 ! Width of the Top Quark
+4.18d0 ! Mass of the Bottom Quark
+0d0 ! Width of the Bottom Quark
+1.275d0 ! Mass of the Charm Quark
+0d0 ! Width of the Charm Quark
+
+! UNIT_PHASE
+
+SELECTORS
+ select jets_pt min = 21 max = 2500
+ select jets_abs_y max = 3.0
+ select njets min = 1
+END_SELECTORS
+
+
+
+HISTOGRAMS
+
+COMPOSITE > xptj0_y1 [21,24,28,32,37,43,49,56,64,74,84,97,114,133,153,174,196,220,245,272,300,330,362,395,430,468,507,548,592,638,686,737,790,846,905,967,1032,1101,1172,1248,1327,1410,1497,1588,1784,2116,2500] grid=ptji_incl_y1.fast
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y2 [21,24,28,32,37,43,49,56,64,74,84,97,114,133,153,174,196,220,245,272,300,330,362,395,430,468,507,548,592,638,686,737,790,846,905,967,1032,1101,1172,1248,1327,1410,1497,1588,1784,2116,2500] grid=ptji_incl_y2.fast
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y3 [21,24,28,32,37,43,49,56,64,74,84,97,114,133,153,174,196,220,245,272,300,330,362,395,430,468,507,548,592,638,686,737,790,846,905,967,1032,1101,1172,1248,1327,1410,1497,1588,1784,2116] grid=ptji_incl_y3.fast
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y4 [21,24,28,32,37,43,49,56,64,74,84,97,114,133,153,174,196,220,245,272,300,330,362,395,430,468,507,548,592,638,686,737,790,846,905,967,1032,1101,1172,1248,1327,1410] grid=ptji_incl_y4.fast
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y5 [21,24,28,32,37,43,49,56,64,74,84,97,114,133,153,174,196,220,245,272,300,330,362,395,430,468,507,548,592,638,686,737,790,846,905] grid=ptji_incl_y5.fast
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y6 [21,24,28,32,37,43,49,56,64,74,84,97,114,133,153,174,196,220,245,272,300,330,362,395,430,468,507,548] grid=ptji_incl_y6.fast
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=2.5 max=3.0
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=2.5 max=3.0
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=2.5 max=3.0
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=2.5 max=3.0
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+END_HISTOGRAMS
+
+SCALES
+ muf = ptj1 mur = ptj1
+ muf = 2.718281828 mur = 2.718281828
+ muf = 4.48168907 mur = 4.48168907
+ muf = 4.48168907 mur = 2.718281828
+ muf = 2.718281828 mur = 4.48168907
+ muf = 12.18249396 mur = 2.718281828
+ muf = 2.718281828 mur = 12.18249396
+END_SCALES
+
+!####### SYNTAX ######################
+!##
+!## REWEIGHT {observable-name}**{val_power}
+!##
+!#####################################
+
+! REWEIGHT ht_part**4
+! REWEIGHT ht_part**1.4 !# DB
+REWEIGHT ht_part**6.5 !# KR
+
+CHANNELS
+ VV
+END_CHANNELS
+
+SETUP
+END_SETUP
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2017_I1487277/fnl3332.1jet.LO-warm.run
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2017_I1487277/fnl3332.1jet.LO-warm.run (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2017_I1487277/fnl3332.1jet.LO-warm.run (revision 1772)
@@ -0,0 +1,187 @@
+NNLOJET_RUNCARD
+LO-8TeV ! Job name id, must be less than 10 characters
+1jet ! Process name
+100000000 ! Number of events
+10 ! Number of iterations
+1 ! Seed number
+.true. ! Warmup
+.false. ! Production
+CT14nnlo ! PDF set
+0 ! PDF member
+antikt ! Jet algorithm, accepts 'kt', 'cam' or 'antikt'
+0.7d0 ! Rcut
+.false. ! exclusive
+0 ! Heavy particle decay type
+.1e-7 ! Technical cutoff y0
+.false. ! angular averaging of the phase space, default to true
+2 ! Virtual Integration method, use 2 if you're not sure
+all ! RR a/b region flag. Accepts 'a','b' or 'all'.
+0 ! set to zero for MC, 2 for point test
+.false. ! print max weight flag
+.true. ! momentum mapping and PDF storage flag
+.true. ! colour sampling flag
+.false. ! explicit pole check flag, stops integration when set to true
+
+PHYSICAL_PARAMETERS
+8000d0 ! roots
+125d0 ! Mass of the Higgs Boson
+0.004029643852d0 ! Width of the Higgs Boson
+91.1876d0 ! Mass of the Z Boson
+2.4952d0 ! Width of the Z Boson
+80.398d0 ! Mass of the W Boson
+2.1054d0 ! Width of the W Boson
+173.2d0 ! Mass of the Top Quark
+1.41d0 ! Width of the Top Quark
+4.18d0 ! Mass of the Bottom Quark
+0d0 ! Width of the Bottom Quark
+1.275d0 ! Mass of the Charm Quark
+0d0 ! Width of the Charm Quark
+
+! UNIT_PHASE
+
+SELECTORS
+ select jets_pt min = 21 max = 2500
+ select jets_abs_y max = 3.0
+ select njets min = 1
+END_SELECTORS
+
+
+
+HISTOGRAMS
+
+COMPOSITE > xptj0_y1 [21,24,28,32,37,43,49,56,64,74,84,97,114,133,153,174,196,220,245,272,300,330,362,395,430,468,507,548,592,638,686,737,790,846,905,967,1032,1101,1172,1248,1327,1410,1497,1588,1784,2116,2500]
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y2 [21,24,28,32,37,43,49,56,64,74,84,97,114,133,153,174,196,220,245,272,300,330,362,395,430,468,507,548,592,638,686,737,790,846,905,967,1032,1101,1172,1248,1327,1410,1497,1588,1784,2116,2500]
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y3 [21,24,28,32,37,43,49,56,64,74,84,97,114,133,153,174,196,220,245,272,300,330,362,395,430,468,507,548,592,638,686,737,790,846,905,967,1032,1101,1172,1248,1327,1410,1497,1588,1784,2116]
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y4 [21,24,28,32,37,43,49,56,64,74,84,97,114,133,153,174,196,220,245,272,300,330,362,395,430,468,507,548,592,638,686,737,790,846,905,967,1032,1101,1172,1248,1327,1410]
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y5 [21,24,28,32,37,43,49,56,64,74,84,97,114,133,153,174,196,220,245,272,300,330,362,395,430,468,507,548,592,638,686,737,790,846,905]
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y6 [21,24,28,32,37,43,49,56,64,74,84,97,114,133,153,174,196,220,245,272,300,330,362,395,430,468,507,548]
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=2.5 max=3.0
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=2.5 max=3.0
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=2.5 max=3.0
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=2.5 max=3.0
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+END_HISTOGRAMS
+
+SCALES
+ muf = ptj1 mur = ptj1
+END_SCALES
+
+!####### SYNTAX ######################
+!##
+!## REWEIGHT {observable-name}**{val_power}
+!##
+!#####################################
+
+! REWEIGHT ht_part**4
+! REWEIGHT ht_part**1.4 !# DB
+REWEIGHT ht_part**6.5 !# KR
+
+CHANNELS
+ LO
+END_CHANNELS
+
+SETUP
+END_SETUP
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2017_I1487277/1jet.RRa-8TeV.y.1e-7.RRa
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2017_I1487277/1jet.RRa-8TeV.y.1e-7.RRa (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2017_I1487277/1jet.RRa-8TeV.y.1e-7.RRa (revision 1772)
@@ -0,0 +1,220 @@
+
+ 13F324A6EB9065BCA3F427D3C84F8F6D73F501468CC59D9D83F56C3769032959D
+3F5DB1877F6129DC3F632FD94684B1E73F68EC5EBFE554EA3F7001013C3824453F73C43D8D0723C4
+3F762A6F4B7348463F785EAAB7E52F443F7A47D47800DE3B3F7BF8F539B1291A3F7DC628F81611E7
+3F804CB3D78AA01C3F8216D41363F5CC3F83A8A64BE8E6503F85297A4268A0483F8741D1241B229D
+3F8962AC91B815733F8BA2DC8361CC1F3F8E7AB977CAE7213F909D4A0230C2833F923CA2FA5DB7D6
+3F942ACB2437CA033F95D06D881EB8943F9720A7F7C4ACC53F9886FECEB286D73F9A2FB53870EF1C
+3F9C232C06914F3B3F9E1F69CBC3CF253FA01276487856183FA107A3A7D878F03FA235DCC4D7D750
+3FA386AEA8DCB6093FA4BE54E97C62923FA610755F64A2A93FA778E841D3EC043FA8FFB6E764230A
+3FAA7AF360015B903FABF1B8D0E1F61F3FAD319CBFB70D273FAE7441014CA0243FAFCFC5C4FC31C6
+3FB09DD2C3A6F2BC3FB1712417E26DC83FB25685E779357A3FB3360E04A6EF573FB411FB41058A54
+3FB509C135F8520F3FB62327C379928B3FB7326BBECA384D3FB81B4CB1BEFA6D3FB9019F31DBAE54
+3FB9C83F125A00A13FBAB30137C494EB3FBB3080F2C9A3B23FBBAFE1F263FEFB3FBC44CD37FBF64C
+3FBCDFBBEA7274053FBD817F1504A2CE3FBE15E17B76B95C3FBE92159A87D46C3FBF3145E1C2F518
+3FC035A16DECB4313FC0CEBF48D028103FC17D8CD37EF29C3FC242832517185E3FC30A7A642599AA
+3FC3D9FB35631CA53FC4B26EFA5485AF3FC59D684109EA9E3FC69BADFB56B1923FC7957E10902D8D
+3FC885E364957F2F3FC9903784CFB2333FCA7AFE2CC1CB083FCBA2382FB870D53FCCFB31195CFD0B
+3FCE328E9CED31C03FCF6C2B6DE7621E3FD06C8D066BC67B3FD13085E72DA4E93FD1F0677952AB83
+3FD285914F0C71793FD3205B478D19993FD3D4B946EE19883FD4AAADDCCED2953FD59E1D8D88730A
+3FD6A4139D26DDB33FD7AFA3665058FF3FD8DF32C22D33C23FDA3D16E6242F173FDB9DF1C47068D0
+3FDCF79E1EB7764E3FDE736EFE2F00E93FE0254F5DAF585C3FE1E9D85B8CE1503FE75737F9399D89
+3FF0000000000000
+
+ 23E8246977C91C1A43E931E4F400D6D523E9EC181B409BD233EACE5AC4C23AEE6
+3EB9B1D6EAF1D4803EC4500A98B249213ECD3E3522BDC2483ED53BBA151E05E43EDF74DBF976A9CB
+3EE816A367D734763EF33D56107C57F83F00D3E2F289A5093F09B236415780F23F123BC6B08E2C45
+3F1AF9AFD6E0EB523F227AA62EA853FE3F28E4AA09A7DFE03F3048F0F6E066C33F33EDC4E001FF61
+3F36DBCEE29910E13F39D03D40CE16293F3D674AB66A4F823F4126D310D039963F43E7FAE74D7E14
+3F4724F9011A7E273F4C2956B31F5F973F5056A1BB037E803F5365B571BA28C63F575EF3DDBAAE4D
+3F5A7091B414079A3F5EAFE2EE25C1903F625FD4217ABC6B3F6548A9AA2E3E363F6844034E0B9822
+3F6A2F6B530F92B23F6BC9699A0DEF693F6D5D8728D2EA653F6EE78A74CCCB7A3F70574BF9A215CC
+3F7139FDCEB872893F7232CBBF3CC65F3F7424F4CA9C508B3F76DCD70EDAAAC33F79620D8B41B5CC
+3F7BACD59C2B09AB3F7E21EFA8ABA9323F8045C3387349743F8189D2B423FEAA3F83255C9A61850C
+3F84BD354F180B383F86DC50A5DFF4CF3F88BF7BDB8436633F8A876280D4BEB53F8C78B40A96B0E2
+3F8EA5DE999A9B623F908293A8F49B473F91B10478A2C9283F92EE17EF792F8E3F945FD5CA424772
+3F95D94A810929C93F9741ADCBF5516A3F9899996E08BF883F9A102604F5564F3F9B992655B92D4B
+3F9D2DFD643DB46D3F9EDA58921F07F83FA0584347CC85473FA16EC1054751F73FA2A52E5733CCA8
+3FA3DFCA2FEAF8843FA529FF06F417D93FA69703B5BE2ED93FA8031917BDAA043FA974FB3D6D1C43
+3FAAFB8A9C8578E83FACA0108239E0983FAE66C59122B5A23FB03C754EE34EE33FB148E8D123A3AE
+3FB25096E913E99A3FB35A7C8FF0374F3FB470EEE5EB24BD3FB5A45ED8E47C543FB722A5756442A0
+3FB8AD71EAAEEBB13FBA65504EA6B4EF3FBC3DFDAC16D6663FBE207FE3F3E6583FC008E1CD4BE9DE
+3FC12133AD0D25503FC248DB82F0E9AE3FC3A7A3CCABA2873FC54E07A225446B3FC714B8B4493B9F
+3FC973088A4451593FCC3EBB0C8E5CA53FCE4FE8EB85AFBB3FD2D417DDB295E63FE10F6193A91978
+3FF0000000000000
+
+ 33FDB9FEAAA50830F3FDF098FE7AD68233FE019295D8366423FE059FCA23B659B
+3FE081916D1E086C3FE0A5330F2B02E13FE0D35642E469FA3FE110F05ACFF6973FE15956014C8E40
+3FE1A202E2874BE93FE1E716CCD679E23FE228BA661240B23FE26C5588287EA13FE2AC63BC02C4FC
+3FE2EA599CBF587C3FE339BA1B29694A3FE389E851A0126F3FE3CE45C178762C3FE40C2DA0FBFD7B
+3FE44535E96EBDE63FE4827ADBA48F8D3FE4B9E132907A673FE4F925688AA8FC3FE52F6237F43FB3
+3FE56BC3F1DA82B63FE5853080D37AB93FE5A318E60FF89F3FE5C3264579EA0A3FE5DDCFC1B26C29
+3FE5F822F00FD1953FE6102E4D22D4DD3FE63A10FD12A8183FE6803861AA83D53FE6C536D4E3A596
+3FE7043BC3680BF43FE738D5E7B87C1E3FE769BA88F7A4A13FE7907297DFA18C3FE7BABCBA88362C
+3FE7F00AD2F1CE463FE82CABB70F24F13FE86A75DA04B1563FE89D73BFBE9EE33FE8C8A15DDD13B2
+3FE8EDC7E22FB1FE3FE9156EA310917F3FE93D834A91CC0A3FE96440F28324443FE980B58857FEF4
+3FE9A2E3F173F1DA3FE9CBFE41F264EF3FE9FBA51C6094F63FEA299F20791F0E3FEA5F60B49AFA97
+3FEA9255CBDF596B3FEAC6737ADF53713FEAF441BF553A123FEB15496C89EA3F3FEB352BC90497AE
+3FEB54AB833E89C63FEB77C6D34A2BEE3FEB9C812CABF9993FEBBE47DE54E2783FEBE1220FA1DEB2
+3FEC02BDE1D95EAC3FEC27B2042CEAE13FEC4D4C0FE44A8E3FEC70E6859AA0273FEC9698E784981E
+3FECB8F05F3150753FECD56974AC29F93FECF0FA5BC91FD13FED10BDD068D2CB3FED3236401402A8
+3FED53CEBF5F75B03FED7645295B42323FED98244B62534D3FEDB7B2253C772B3FEDD3CE79D0A651
+3FEDF1058E4AB6253FEE0B447A663D2B3FEE24160B6572C03FEE3C1956B293CD3FEE533FBC6D72A8
+3FEE6A9B1DAF16833FEE83DB0D4CB17C3FEEA055A7E921453FEEBE79CBAF74A03FEEDC9FD3E85B50
+3FEEF97AAC9FD3143FEF11173A5961EF3FEF2B094A8B93563FEF44ED147234893FEF5AF56ACFE252
+3FEF7480B8B986843FEF8F0F55D513B83FEFAD3F8B7F7BC73FEFC99BC105C1A93FEFE34EF23DAD03
+3FF0000000000000
+
+ 43FE1679A5ED0F1E13FE64BD02384670C3FE81F65DFF66FA53FE939BE55A1E602
+3FEA18E67C77988D3FEABF5DF80DA5AF3FEB3D7768210C793FEBA119C090784E3FEBF97159E9A7E5
+3FEC54E1E9C4DC573FECA7B649A1873A3FECEB4F1AEBC2713FED2361D14B3D4A3FED51F26062D370
+3FED77A8771DAF363FED9918D61D35003FEDB2072A6835053FEDC86DC1E125103FEDDF18053FC0B9
+3FEDF2AFEF07850C3FEDFDEC74806A7A3FEE0A8AB942904F3FEE18732EC85B693FEE25B5D82505AF
+3FEE31AEE32779C13FEE3C64D096A84B3FEE46EFD3CFC3593FEE59FEBD3DCF343FEE7026AD06E15B
+3FEE86FF103BCC993FEE9C10DBF802C33FEEAC479BAA43693FEEB9D415D280D53FEEC7A3849BE952
+3FEED56AC8283EFE3FEEE3C8D2B788023FEEF2563603BC603FEF001D23F2D1C23FEF0CB8E0A8420F
+3FEF1A2308A785393FEF27A855CCEBDB3FEF33F17FE17C7A3FEF3EB346861BB13FEF48D43A093BDD
+3FEF52A6C199BD573FEF5A85A874961E3FEF61B5AF8FA2473FEF6A123275B1EE3FEF72008BE372CF
+3FEF7A94F7E33FB23FEF8331CACF7C8D3FEF8AB3B497C0B53FEF91AEA7F385B23FEF9877DB1FE0BC
+3FEF9E63A9F4E4C83FEFA3EB323CFEFB3FEFA96AD2F30C193FEFAF8B4203196A3FEFB5C4EBD7A483
+3FEFBAB31C6FDE1D3FEFBF10CAF2EA383FEFC331FB6575DF3FEFC72F931169C33FEFCB6057E657F0
+3FEFCF98FC3F93183FEFD3CD25D087FA3FEFD7F1E9CB869B3FEFDC06D576222D3FEFDFF493AAC9DE
+3FEFE37FC858971D3FEFE6DBDE9B9ED73FEFE9D3DFE9A1E73FEFEC2A26D192473FEFEE2EF23265D0
+3FEFF03439A172623FEFF26EC1DDB4613FEFF43D82D552803FEFF5EB60272B853FEFF7898FE4E497
+3FEFF90AF11818853FEFFA3C5AED63903FEFFB49EAEA97D43FEFFC1AAC1D1E063FEFFCD52534AA07
+3FEFFD701E10A81C3FEFFDF50A3A0DD53FEFFE5A1AA79CA43FEFFE9BAAC7D8A83FEFFECACD0DF493
+3FEFFF057B2C20E73FEFFF3A62156F253FEFFF5FF2AF27C73FEFFF915BAB0FCC3FEFFFB5DA851BF6
+3FEFFFD3BC395BEE3FEFFFE72C4D99513FEFFFF6267A74D63FEFFFFC4F2CB7AD3FEFFFFE7FC8FF2E
+3FF0000000000000
+
+ 53F72561CAAAA7CA43F81872D7B3A5DF23F882389DB30324C3F8EF93C6657E8FA
+3F9294A72F22EC6E3F95531FAA4DAA273F9CC9548FA789913FA3CBDEDA7647D93FA8AA9D6CEE33AC
+3FAE780286EDCCBE3FB23C99E7CA248F3FB578B087A43E493FB9302F46DA77C33FBC7EAC5195ED0A
+3FBE84DDCD24AA983FC06EABFAA0F31F3FC1B5EADA7698DA3FC2FBE51F5A66DB3FC5570B8EAD056C
+3FC71226B06302623FC8D10955091FE83FCA87F8C29974C53FCC37699B03782B3FCE256D3192604D
+3FD0223D469F61733FD12205E499FFE23FD222A12D0ECC543FD3196BF54C7A993FD3F8224E3D82E1
+3FD4CCB9429859813FD592B28E2685203FD65074321DDD773FD7017316F54AD03FD7A60F006D8D10
+3FD84EDEE5E42B3F3FD8F524D19ADA0C3FD99B6E30DF11463FDA27613C63787D3FDAA157BC2C6811
+3FDB08E5E2D7D0103FDB5C72E822B9793FDBC6BA3A1C39673FDC5A43609BDBCC3FDCE4DDCECA0F8E
+3FDD611AFBBEACF83FDDD97AAB82AEFA3FDE4E12A97EF2AB3FDEC00568D08A4E3FDF2A8868035B0D
+3FDF763056568FBF3FDFABC4E82698333FDFD174BEEEFD823FDFF6772440CEFB3FE0101B3CAE800B
+3FE02DA89598EE5D3FE057FE0EE686B83FE082ABE62C807D3FE0B83E46D1271D3FE0F55DE5508989
+3FE134872E52373E3FE179E17EF5F3743FE1C2B38D12D1103FE20A3023DF1F833FE2515DB35C6464
+3FE2996ABFE83AC53FE2E0CBBFF1A5583FE33B350740A86A3FE38C09288A42AC3FE3D8C934CFF6DF
+3FE4196FB7B44DEF3FE45D45CA58FD1D3FE4A0E7DB0F8DD23FE4E98632C64CA23FE538DEC710A0B3
+3FE5A402F8584AF63FE61115493FCCEA3FE67782380C3C3F3FE6D7CCD2D8A31F3FE736955A6AA8D3
+3FE7A1DDA93D06C63FE82B55FAFCBB4A3FE8BAF67DE7390E3FE94C2E90C95E023FE9D34A97FA5AF2
+3FEA52BB4983B0BB3FEAD9B1FC0A6C523FEB57434E095BA43FEBCD7877F4710F3FEC3CC387DCD2FC
+3FECA7331010480B3FED16922FAD09653FED74415B323B793FEDD502BA1D43C33FEE335798FCB620
+3FEE91CD4E3F41AB3FEEEB51012DA8073FEF39C01A4CD3D53FEF824C4A01F2153FEFC538DEDBC26E
+3FF0000000000000
+
+ 63FC3BA9FB66D4AD43FCCBE65651CF52D3FD04CFC2AD080D63FD17380693B3CD2
+3FD28E25BBFC409A3FD3A5C09935F7D33FD48D2225C86DDD3FD5733A335366983FD60FD6E8D53511
+3FD6796068C2E9593FD6DFFE36D986593FD73C27F4D8BF093FD7A5FFA88583B53FD81984B3400FBB
+3FD881894767AC6D3FD8D47B7F70735A3FD92A81EE9C381F3FD97902EF1444AE3FD9BD874F526611
+3FDA068E591454373FDA441C6EC4428D3FDA7B3F635DD9203FDABD8CE34232193FDB03AD3B903092
+3FDB4EF0971C5F863FDB94E9EDF355AF3FDBD1C96E29E5FE3FDC0DC9A21473CC3FDC501A81037F2A
+3FDC8F5D798412563FDCC9C42A0C9F593FDD0494CD56F7003FDD3D4E9BE9746E3FDD71A69800AE76
+3FDDA486F3EEF6873FDDD30F4358ADCA3FDE040C61B3D75B3FDE3BD20CD733EC3FDE6F50673863FC
+3FDE9ED99A4439EE3FDECB4ACC9C7C8D3FDEF558746A8DC33FDF1ECC94B928683FDF4B597CD48BEA
+3FDF79ABDAD3F08E3FDFA40494949B953FDFCF5A79ABA7B53FDFF962BD026C703FE0104EE4340C54
+3FE022558269F52B3FE033B97689D6693FE04516BCB912133FE0584F39229EA13FE06D07EAFF6CD0
+3FE0830225FE07143FE09943FA8015873FE0AF33726D41803FE0C5D03286FAB73FE0DC15E3FB3622
+3FE0F02817979C233FE102BE3ED3C4843FE1148BC3D19D903FE129DED93DE2393FE1404188825CC7
+3FE157631589E3933FE173D462F1CD523FE195FC865F25023FE1B4572E72D18D3FE1D2A734DC2071
+3FE1F223699E07F43FE212FEEDC73AED3FE23811EBADE97B3FE25C63EBB756F73FE27FD1F399C1AA
+3FE2A34CF5F79B4A3FE2C79A40D7147D3FE2EB39FDED9F053FE316DB07DD23BB3FE34654709B3485
+3FE37FB27DB242193FE3A60E3D04A7023FE3BEAD4ED1BF4E3FE3D84DE9D527713FE3F0BEDF8451BA
+3FE40A5CAC90CA323FE423DE64ACADCB3FE43B2FDD214A263FE45B34EF0169A43FE47BEA4AC4F333
+3FE4A236E00B69C33FE4D4609B9825793FE5281355EAF9983FE5A8A150B835F83FE6346222EB47E2
+3FE6B64A019F1D3A3FE77D5FAEC989DE3FE8A0A9965435583FE9F981D279A2D53FEBC858815D3D18
+3FF0000000000000
+
+ 73F7DBC7E698573823F8C6E8D682EAA053F95DB424386A7253F9D0B07549B27D4
+3FA18FCF2DB741153FA4EB60FC5460213FA8A4B845F5D9D63FAC41FE128E00D13FB065E5F35474A9
+3FB2CE6AA41A57983FB51D976B8B046D3FB77EC32476E7893FBA12ABD67B4C503FBCD3C9314BF4B8
+3FBFAF5DDCDA433E3FC155EC17ABAC5A3FC2D210607E46F63FC445E411AE88A03FC5A7ED4F813892
+3FC73A842E19ED323FC9120EF23DEBB73FCAA288A8DD48253FCBF58E162728853FCD510AE8DAB373
+3FCEB3ADB32116F33FD02604794974D13FD0EC8AAD9D45703FD1A250080A63363FD26FE534058491
+3FD33BD10BB0A0393FD408220D7EA8153FD4D705CA3CD2303FD5A0102BE2809E3FD6538371048910
+3FD700B182FE17343FD7AE965A6001823FD84B01207463C23FD8E16AB33A2CD03FD97A4D3053D837
+3FDA0EEBACEBDBAD3FDA9C960244026A3FDB28ED4DCF75AB3FDBB793CEDF74B63FDC50DDE4E0EECA
+3FDD1B81AF0A8E243FDD7BAA34551ACA3FDDC589EFFC15B83FDE11E09BD127523FDE55F6770DD761
+3FDEA111C1F0C2BC3FDEEACA2DBD64273FDF45098F128B633FDFF07A7692CADC3FE04D09FFA87BAC
+3FE08E570AAC56753FE0D4E2F2219B163FE1234DA411611C3FE17B6231A5D0933FE1D4F007BE8D13
+3FE223EA6621A99B3FE26EA11BFAE5473FE2BB5F5A0D61463FE2F9962AD98A483FE3481E0735422B
+3FE399F5C2AF56AF3FE3E87886E9AD3D3FE442463888F4703FE4939CB94A29583FE4E6ECDF0DF93D
+3FE53194545D753B3FE571A3C9D031603FE5CDC475DD1F203FE61DE1800CCA4E3FE6726E6D96EA86
+3FE6D06CBACB7B803FE735CAA0414F3D3FE7A9A90C5D7E773FE80F42B3747DD63FE87CB5FA7EBF95
+3FE8EB28E6FB94F43FE9511762BBEE743FE9AB19C8F1BB843FE9FF247DAC2F523FEA5A343BAF2925
+3FEABF50617F6A843FEB2002911B08BC3FEB745E9EC3F6B23FEBC650DBAE2D3F3FEC198F0DB7D2DE
+3FEC743FAFCC9DD23FECCBF6FCA5B35B3FED2AA98DF2A3A03FED8A71C133814C3FEDECBFD509E3DF
+3FEE4DB846B875B43FEEAA24C6BAE6C13FEF06AB9C8C6F4B3FEF63340ADDE0773FEFABE0780E3B6F
+3FF0000000000000
+
+ 83FC520E062EDD9A43FD060966130DB963FD35AA2967F344C3FD5393610D62DC0
+3FD6CDC7D065AB123FD84D19C3D28DC03FD96F0BF3CD29283FDA5EA9166694EE3FDB3D10550C4EB7
+3FDC00392ADDB4B13FDCB2A6961DB3353FDD4C10023FCAE33FDDE3C066E1C3F23FDE70FEE62EB395
+3FDEFE973E0933523FDF8F42AD80350E3FE0072FF67F476D3FE0455E7042E26A3FE087FC9C8AE8DD
+3FE0CCC05036B4303FE10B87EC8D359E3FE1445824598E123FE17877C72CA7A93FE1A8FA1701847F
+3FE1B99D41DD641D3FE1D0AFDA91F2F83FE1E7C664B00B963FE1FF2AE18B5CB33FE2165F52A6CBDF
+3FE22BD65F375A0E3FE23C37150C3A583FE262A2F98592CF3FE28C80DE267B1D3FE2AFDA2F28C26D
+3FE2D25F9A7446D33FE2F81E43172E413FE31ECBF9A13AE23FE342B41191CF853FE365587A0DBE8E
+3FE386B0A1126A803FE3ABDED0627E833FE3D644F652FF893FE3FF424FB756203FE421AA0FB7FBC6
+3FE4415B565DBEE23FE4621878D370D73FE48422F01276273FE4A7F94BA61C7D3FE4C76E94FC27CB
+3FE4E634D250129D3FE502EB0FC574A93FE521128C07826C3FE53FC6FE92D5C43FE55DF114F4951D
+3FE57D44687ADE063FE59E37620685253FE5BEF8C2A297C23FE5DB54D47423143FE5F1869BBCEDF1
+3FE60C62B18630EF3FE6287251F9EF213FE64679C6403D053FE669DE4D64CA9B3FE68CB8B1171429
+3FE6B2ABB83937243FE6DA073F5B52203FE700132422F2CC3FE71D7C951F5DFF3FE737A0799AA889
+3FE74FB308D251433FE7666BCCCCD5223FE77D2080B395FF3FE79F5B6BACF5F83FE7C8C106877AE1
+3FE7EDA98F48C33F3FE81588696450883FE841E2C1D2FC1C3FE870B0783876623FE89C983545398D
+3FE8CF225A3B2DF83FE8FC6699C004BC3FE9282D6AC2C3B73FE9568087876BDD3FE986BFCFC9BA7A
+3FE9C3B2AAC7B54F3FEA18AC4B62F73B3FEA8EE36B49E95E3FEB47AB213F32253FEC681221E6B881
+3FED3BB550601CF73FED5FE4C2CF55053FED71CA8A2828193FED85D10CC67BCA3FED9C384AE256D2
+3FEDB0761B4DE1E53FEDC445A7068B473FEDDFB618B8BBD63FEE10DC6685E8193FEE785020D62E51
+3FF0000000000000
+
+ 93FBBD091DE20A3C83FC50F9065C5AB9C3FC8C930E494D6EF3FCB351119B20E70
+3FCD30416FD160143FCED8B4F2C75EE83FD01F727D23E32F3FD0BA339914F20D3FD159D161A25C79
+3FD2046A6CB12D303FD2A39A29018D863FD32D5F16E3D3DF3FD3A1E3EA9F218D3FD4117EB6ADA660
+3FD479E0A6379B703FD4DBFEBC0713F93FD53FBAEE40AA7B3FD5B231185D7C703FD62A027240D4CC
+3FD6996B5C5EB7A73FD708E78134B6963FD777990798EC403FD7DBFB03DF235B3FD84201A3B00F92
+3FD8A8255BCB865A3FD900FC1C5578A13FD942831CE2294D3FD98B719931C91B3FD9E1863A69759D
+3FDA4AC7D27B3C973FDABBFAC9BE6B473FDB1E54231C122F3FDB6F08AC9638F73FDBBBC97BC11787
+3FDC04A54794A8853FDC4619125B0EC83FDC9214EF3217BF3FDCE17F366B56F13FDD1D7E7AA9E794
+3FDD730552A7F6733FDDCEDA2B74E24D3FDE34050934AE1C3FDE916F87E0A2603FDEE07D90A55A65
+3FDF33E78A64FDC73FDF93946E6F25C33FDFF194ED23D84F3FE0211959D0461C3FE0502A3B648BC5
+3FE07BC02AE63DE63FE090C8B3E0A6003FE0A3C7519DEE803FE0B8065149A07C3FE0CE97CCDE49AE
+3FE0E4A34BBC29C03FE0F810E602E3B53FE1092CF120D8D63FE12048B0C09DE83FE14748FC1FF2F6
+3FE1698C0DE4FED43FE18C0B2F7AA0293FE1AF0F95ED1C0F3FE1D309763951C43FE1FA2E06F02014
+3FE2216A8FB30E3C3FE244CA6D16FFAE3FE26FB012A161033FE29FAC92686FDF3FE2CAD9C1AF158D
+3FE2F54CADD3E70A3FE31ED6C041FCE43FE347D87070170B3FE36196356AE1EE3FE37BAEF6613522
+3FE397E97516DF443FE3B468443F1C1E3FE3E28E85C761AC3FE41AC1A6E6B4F13FE44F05BDEBE13E
+3FE485D736BE708F3FE4BB26B23D91C03FE4F49EEAFD54293FE52EA571D305453FE56B532EAEC2A7
+3FE5AA45F42625353FE5EA62BB407DC23FE62DF60487B77D3FE6715F421363523FE6BA3B68A106D4
+3FE706B7D22715DF3FE756203A73020D3FE7A82973EC624B3FE804C706FF371D3FE863C05A053E93
+3FE8CA1B1F99DC923FE94BC2A6EF02FD3FE9EBAD5DC9B6F93FEAB16F82B6C7973FEC2E45094C3644
+3FF0000000000000
+
+ A3F847AE147AE14803F947AE147AE14803F9EB851EB851EC03FA47AE147AE1480
+3FA99999999999A03FAEB851EB851EC03FB1EB851EB851F03FB47AE147AE14803FB70A3D70A3D710
+3FB99999999999A03FBC28F5C28F5C303FBEB851EB851EC03FC0A3D70A3D70A83FC1EB851EB851F0
+3FC33333333333383FC47AE147AE14803FC5C28F5C28F5C83FC70A3D70A3D7103FC851EB851EB858
+3FC99999999999A03FCAE147AE147AE83FCC28F5C28F5C303FCD70A3D70A3D783FCEB851EB851EC0
+3FD00000000000043FD0A3D70A3D70A83FD147AE147AE14C3FD1EB851EB851F03FD28F5C28F5C294
+3FD33333333333383FD3D70A3D70A3DC3FD47AE147AE14803FD51EB851EB85243FD5C28F5C28F5C8
+3FD666666666666C3FD70A3D70A3D7103FD7AE147AE147B43FD851EB851EB8583FD8F5C28F5C28FC
+3FD99999999999A03FDA3D70A3D70A443FDAE147AE147AE83FDB851EB851EB8C3FDC28F5C28F5C30
+3FDCCCCCCCCCCCD43FDD70A3D70A3D783FDE147AE147AE1C3FDEB851EB851EC03FDF5C28F5C28F64
+3FE00000000000043FE051EB851EB8563FE0A3D70A3D70A83FE0F5C28F5C28FA3FE147AE147AE14C
+3FE199999999999E3FE1EB851EB851F03FE23D70A3D70A423FE28F5C28F5C2943FE2E147AE147AE6
+3FE33333333333383FE3851EB851EB8A3FE3D70A3D70A3DC3FE428F5C28F5C2E3FE47AE147AE1480
+3FE4CCCCCCCCCCD23FE51EB851EB85243FE570A3D70A3D763FE5C28F5C28F5C83FE6147AE147AE1A
+3FE666666666666C3FE6B851EB851EBE3FE70A3D70A3D7103FE75C28F5C28F623FE7AE147AE147B4
+3FE80000000000063FE851EB851EB8583FE8A3D70A3D70AA3FE8F5C28F5C28FC3FE947AE147AE14E
+3FE99999999999A03FE9EB851EB851F23FEA3D70A3D70A443FEA8F5C28F5C2963FEAE147AE147AE8
+3FEB33333333333A3FEB851EB851EB8C3FEBD70A3D70A3DE3FEC28F5C28F5C303FEC7AE147AE1482
+3FECCCCCCCCCCCD43FED1EB851EB85263FED70A3D70A3D773FEDC28F5C28F5C93FEE147AE147AE1B
+3FEE66666666666D3FEEB851EB851EBF3FEF0A3D70A3D7113FEF5C28F5C28F633FEFAE147AE147B5
+3FF0000000000000
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2017_I1487277/1jet.RRb-8TeV.y.1e-7.RRb
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2017_I1487277/1jet.RRb-8TeV.y.1e-7.RRb (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2017_I1487277/1jet.RRb-8TeV.y.1e-7.RRb (revision 1772)
@@ -0,0 +1,220 @@
+
+ 13F960D9B8773A4BB3FA76DC1561839383FB196F2042B234C3FB7B8FCF3617DC4
+3FBDB0589E0FEA373FC1C0DBF12B7BC33FC4B1FA5E692EA53FC7D253991ACDDF3FCB1635C017F7A6
+3FCE83E8F47337943FD11070CF179ACC3FD2F0FBE2F922593FD4C8A0ED1471013FD69084D12744B0
+3FD85CF8C9DF922C3FDA07FE82B410C63FDB94526DB3C0423FDD27FBCC3EA7E43FDED13D8322EC2D
+3FE04898BA6801603FE11838C6BF6F0A3FE1C25705E0E8DE3FE255C0AE04EA443FE2E0098157F331
+3FE36AFA153456613FE404B05023C9503FE48DF99CE169A83FE50B8C54FAAC383FE56C9D1867CEF6
+3FE5AF16FAF9A3183FE5EEE421AB98263FE62F3D775CE4633FE686A0DA78695C3FE6DCB9C10B610B
+3FE71D3E1CD4F8EA3FE754B1B99C038F3FE78E43112A10F93FE7CC1494BF9DEB3FE802ADB665307A
+3FE83E86B1DF08D93FE877FDEB948A9C3FE8A7D094AB90BA3FE8CDC8C4CFFC5E3FE8F11241E0E93C
+3FE913C5C632B6E73FE94146DAA14DCE3FE966E48F3D56283FE98FF045F47A443FE9B695D262B0B9
+3FE9E2B0C2EA27B13FEA094E42C2553E3FEA304E6B6AD8183FEA579497961CC33FEA7D4E624291BB
+3FEAA015B7B375C63FEAC26ED1336CD43FEAE688CC468F0D3FEB0B54348F82533FEB2B169C5BB7E8
+3FEB47622FD6F9693FEB6335AC7C208C3FEB7E5983EB393C3FEBA1B71C6C72893FEBC53326035025
+3FEBE8E59EC5CA813FEC0C4B002DA6503FEC2F7FCA56091A3FEC52CA6C2B228B3FEC772AA673010A
+3FEC9B7F916146F63FECBF247BFAE2EF3FECE2A3DCC6A5FE3FED062E5E55379A3FED28BB927D00BF
+3FED4863264CB60B3FED6633B793403D3FED8309E22DD23F3FED9F22CF0C7DD53FEDBC086447EC97
+3FEDD7D9C1CC3BAE3FEDF2428539C79F3FEE0B2B9CCF4BD13FEE230E7C000BC93FEE3B9BECC336C2
+3FEE548264B8CE403FEE6C70F61604583FEE83511E4644923FEE99C73C53EBC83FEEB05D24CCDEBA
+3FEEC629DAD9BFC23FEEDB9D57C005063FEEF1AC5A5509A93FEF08D8D02688383FEF21A2265F1D91
+3FEF3C5A026808E53FEF59DD2262C2033FEF799F5886C2813FEF9B5DD63DB2AB3FEFCB864C3663A1
+3FF0000000000000
+
+ 23F94DD587569CC3E3FA4DD0B06B30E9C3FAF7212D6F4B4C33FB5B88AE7208105
+3FBC1AC7C383F28E3FC13F71728726783FC43F5BD5076D6B3FC7793153CA863A3FCB111727F0A40B
+3FCE88D043F673663FD0FEDD18BB51803FD2994FDBD4312A3FD43B268ADD83803FD5DC536499845C
+3FD789423DC6DA823FD952D87A5CD82B3FDB18DEAE9E0A213FDCDB02731DA5303FDEC072D6151300
+3FE048C2C68C56A13FE12607716078D73FE1FC056218015A3FE2DB2A88BEDBA13FE397E568513CB1
+3FE42B815E53ED743FE4BA48F4B85CF53FE5406B96E276B13FE5C5793FDE6BCB3FE644ACBAE42849
+3FE6B2A6B5CCA63A3FE7102A325229FE3FE75D04B444B72F3FE79C560516CFF13FE7D5A9201DCC3D
+3FE80CE1BF8D2A963FE844CF33B3F9463FE88C9D1422F0A53FE8D12C411FA4283FE910E2F38C30E0
+3FE94E01E4FDC4B03FE98CA26A7617F83FE9BEE7063ECDB03FE9E46D5BDED32E3FEA09AC511BA9B7
+3FEA2F3F01D307A33FEA575F2DFD26E03FEA832CB3277BA73FEAAB158040F8F63FEAD1F8D8E4EB54
+3FEAFA92D405D6B23FEB223B6F677FB53FEB470B16C69F253FEB6A9CB76410DC3FEB8FF5B764653B
+3FEBB5E2CEC692F83FEBDB39428D2B553FEBFF1C704167F13FEC2131B2481AB03FEC42378431F496
+3FEC62455BA3EFB13FEC823A181A77FF3FECA1897925C71C3FECBFB4EDFB90BE3FECDC880C2C29B0
+3FECF7EEE25E08413FED126C081DC6023FED2CCBC7D87CEE3FED46F56C80B0593FED60AEA353CA20
+3FED796605E851643FED91FCB80485773FEDAA4F66811C6D3FEDC213DAD3F51F3FEDD814877D54EB
+3FEDEDCB6F3F95BC3FEE038104E8BF883FEE19B43450FDEC3FEE2F0A872203613FEE44074029012C
+3FEE58E08F40BA1A3FEE6CBBE33F6E363FEE7F9DBDD2201F3FEE92325516A56A3FEEA49E1C38370F
+3FEEB7986C0B91093FEECABB6AE4ED0A3FEEDEDEB976122D3FEEF35338CEBDA23FEF08540BC89564
+3FEF1D7B3F8F22C43FEF32D2C8CF8E283FEF49156AB69A843FEF60AFF60F05273FEF79BF49065A06
+3FEF90B39C7A0D2A3FEFA2CA7BB351BC3FEFB54A301AED513FEFC8423F1E43093FEFDC0477F2C33A
+3FF0000000000000
+
+ 33FD34FFA971736453FDACC2C2DFEC1E73FDD17E058F7D5EC3FDE020617B03D48
+3FDEA67FEE91702B3FDF2AF9D2528F5E3FDF994546D338C73FDFF986A52455BA3FE029F18F0959EA
+3FE054848900E04C3FE07D8B595830D53FE0A38F210E05BE3FE0CA695AB4FF903FE0F119D0F510CC
+3FE116CC1356550D3FE13A8686A4E4633FE15E78924CB7C13FE1853FEC2C503B3FE1A9707B3BCCBB
+3FE1CE9CD8C8A07B3FE1F3970F0CB72B3FE2182C393A48663FE23C232EBB00DA3FE2606C12378FE8
+3FE282A816FD068D3FE2A63091308DA43FE2C89D498964493FE2EA71672491073FE30E03E1B57522
+3FE334F655E001513FE3574A0AB609593FE3782EEFA6CDE33FE399362CECBE773FE3BC9222C0BF56
+3FE3E489CC57C9483FE40C109A134A643FE432F4BC29C55E3FE455CA19F3B30D3FE473989F8B4FF7
+3FE4938A0545439A3FE4B024350B7EB43FE4CF0F609C73DD3FE4F17AF4FF4D3A3FE51B417D61279A
+3FE546701B62925D3FE5751B5285F3FF3FE5A34AAB7F42F23FE5D0CC472395D13FE5F80E553D4184
+3FE61EC6A5ACC7C33FE64346F925943A3FE66F29B70D314F3FE698594E575B9E3FE6C30C3125E576
+3FE6EEB2918BEF8B3FE71BFB22AF07923FE7485E02A944F43FE7784D8D31F2C43FE7AB6F589CD257
+3FE7DCCD591E3C263FE80C9A201610E03FE839B2597ED4693FE8610A3F1F42E93FE88700992E2181
+3FE8B11FC3735EFA3FE8DF6599332DCD3FE911CD8B4E5EDF3FE93EF16235D2073FE96A615D1B35D2
+3FE998D9A2439D6B3FE9C1DFC5F1C69E3FE9E97CFD1D65143FEA10D0E0533DD03FEA38A98DD58FBD
+3FEA6B536A34520F3FEA9ADFB8328F4A3FEAC94BC08C08DD3FEAF804D2A445593FEB24CB5CB2D82A
+3FEB52257E9838F03FEB7EC17FC9E10F3FEBABD4D0FC278D3FEBD8C6DAB42B2A3FEC068FAA91A6BF
+3FEC356DB4D0597C3FEC6547F809F4E13FEC95FF02191BF43FECC4B10E957BC63FECF42E1EC4BBB4
+3FED23112D52F59B3FED569AE4C9DF783FED8DE8338F42533FEDC724F8EB41F53FEE058F186A7D03
+3FEE4D830CEB7A0F3FEEA91D052B01C73FEF08CEEF29EB983FEF5A754D7859B73FEFAD112B215125
+3FF0000000000000
+
+ 43F97308ED604CDA23FA7F3D6A0971B273FB231C8C331729E3FB85C858906711C
+3FBE373DF17CEE093FC2264E92893E673FC5558EECDCD5083FC878E4EF5682A13FCB7DCABCC404F4
+3FCE1B7EDF0BA28D3FD047FD921601183FD16F6B41BD454A3FD27E7A50E192D83FD348399E7A56A1
+3FD3EDE688FA98AA3FD480A6CBA30D203FD5234307801E803FD5CB1DDA2A83E83FD6646DB9F8F7E8
+3FD6F01D1FFCB3C43FD77B97E2CC40343FD7DFB67ABDA2E53FD82F5164CFD0D23FD881D782A828D5
+3FD8D28F2BEE142C3FD923C74E4E99963FD9893ADED424083FD9EEFFEB67DFB03FDA476ED153F4B9
+3FDA94567C70CAFA3FDADDBADC78A4EA3FDB28395E5A21B33FDB7BC8E44B3F173FDBD6F200574EB0
+3FDC2F06B804C6003FDC857D2C8D482C3FDCD6086104056E3FDD2530C92C27B13FDD6E84BF39572C
+3FDDAF831904BD283FDDDF1C82FFE22E3FDE07E0996476E73FDE2E873261A3363FDE5385AE474D80
+3FDE8215D60701A83FDEAB271EB4BB943FDED2851D4895323FDEFA9766D783AA3FDF1EA724DD1AB7
+3FDF3EF4118107B23FDF5E92E79C221F3FDF8063A672DC4D3FDFA5DBF309651C3FDFC9A2969A29A6
+3FDFEC3657D33BC33FE007798977A4C43FE01987931A189C3FE02BF99AE3CAC03FE03E2C13F2D04A
+3FE0507A600A3A7D3FE06363C8333E973FE07666D5870CD33FE089D7442B73973FE09E4C950118BE
+3FE0B555A88E9D343FE0CCF719C12CB33FE0E15EF611A50D3FE0F72C4C5E31B53FE10EF5C54B8591
+3FE12B0F3A8B618A3FE14C7EB85EB07F3FE1726316CB46683FE19CD61C23437C3FE1CBC78F72F595
+3FE1FCAAE2E099013FE2336428145B793FE26DF950B243383FE2AE6290FA9FAF3FE2EF08E728FE26
+3FE331EFA7145B923FE37C3BCB047B323FE3CA63F44AF9BE3FE415D8CA04B3F73FE46B50FB2E8309
+3FE4C1F51050B7CF3FE5363F52EDC7653FE5ABCD828D1B1E3FE637535ADC0DAD3FE6C7AEDA2E05B3
+3FE7760DE35A257E3FE840E8A5C8617D3FE921B5EA1F4DF23FEA06EF9F3C5D883FEAE168A80D8A76
+3FEBBE38E9E197943FEC9775A63A6FC53FED84E16CE9E4553FEE47AB05B080D83FEF17D6B0F35C5C
+3FF0000000000000
+
+ 53F8511432DF4AD593F953C97F6F9D9563FA06ECF9FAA7C123FA616488AA96664
+3FAB9D3308332FB23FB07D68F481CEAE3FB350A251C513EC3FB60E2B7DC3202D3FB8BAD64190C70F
+3FBB3ECEF3520B933FBDBA8A80EA13163FC01D30E9B68AFE3FC1512448C4F0473FC27CCF684C6AE0
+3FC3AEA2F249A3793FC4FBA3B433E7F83FC657B2AB9F396B3FC7AE03E69A8C903FC901B124B63E68
+3FCA5FD3C431CEA23FCB89D3F4AAA2DE3FCCE191FB603FE93FCE2872A06C70623FCF959ED0141519
+3FD08B425502D1DB3FD151B4DC3626903FD2148003B3006B3FD2D1693848E8573FD388095002741F
+3FD440A7D7C94FA83FD4E72AA7E57A653FD5875FD0F00A603FD626795195D7D13FD6C1A2D5589EFC
+3FD7643EE11C5DC43FD804DF28D6C09A3FD8A041B929B7223FD93D384221E88B3FD9D740C6D32287
+3FDA7149DC884FB73FDB0226EF579F9A3FDB7E40398C9F563FDBF543D26F04733FDC6FE04E2F5290
+3FDCFED670334AF23FDDA9AE1AEAEFEE3FDE5F64A5BF82323FDF1FC2030EB4C63FDFE0BDE6FC2089
+3FE04E4C0E7D2C803FE095FF29489B7E3FE0D8439DCE20F23FE11B594F1DD1CC3FE1646F4B5C4485
+3FE1C0E605ABCF803FE217D3768371183FE264B4864110313FE2AAF664A7D13B3FE2EF85CBABD79E
+3FE3364D866F59513FE380506405CE973FE3C9185120EE553FE41428BBDFD9AA3FE460D1FFFB81A3
+3FE4ADEFC83BF4BB3FE4F9B14523C5D83FE54E116DCCCC0E3FE5A39CF346FF4F3FE5F51FBCA4CB54
+3FE63EC57848E9AC3FE686D6DFFCCDC13FE6D19168D544B53FE72962D3EFF1363FE790EEBC51D86F
+3FE7E4B765FE646E3FE8277C7D55DA593FE8678B8DDA56283FE8A4C38CB2849C3FE8DF27430D1DBB
+3FE939FA9C3DAFF73FE99670BE5A48F63FE9EF930E19D8C63FEA45D65DD6066D3FEA956EED4A33A0
+3FEAE7E31DC1250F3FEB3E048FE2B39D3FEB937618153ADF3FEBE4C6A9549F793FEC3467517BE275
+3FEC7E999D67ED8C3FECC91AF6C1C53D3FED1756848E2D313FED70034B65589E3FEDC63EDEE5913D
+3FEE21D32AD551003FEE7DD7FE68F9503FEEE2E34CD439EE3FEF45AE149A86A73FEFA15233EBFC5E
+3FF0000000000000
+
+ 63FA528D142C418323FB453D261C15B673FBEAC74843869FC3FC3F7526208FC15
+3FC83A6B65F6AD253FCC1F2DB52CB1FB3FCF9D0DD466D6F03FD13643B9932E883FD25975681DA9C2
+3FD33D8BFDCA07143FD3D1FBC7B9AD1C3FD45D483EF5F1E03FD4D5E5E8A0A8F23FD56B1B91A899C2
+3FD61ECE77E957D13FD6D361CE051C5B3FD7802DAC3894753FD81B165AEEDFFF3FD8AC0FBF155804
+3FD93BCAD43E586C3FD9B9A8C01B9C603FDA283C5D360DD63FDA97929F0431BA3FDB073110E7948C
+3FDB787624D196B83FDBE796F09778B53FDC4E52A84CC2B13FDCAA89266426583FDCF7C13E94975D
+3FDD3ACA55128F333FDD7B1910BC029D3FDDBC7BA4CB60073FDDF43D04FCC42D3FDE2923C420A82B
+3FDE519679959DEE3FDE79ED025070893FDEA074202E04573FDEC8ADA587399A3FDEF0EDEB22AEF7
+3FDF16F5B21431EF3FDF3D9BC24E29433FDF6414CBD04F783FDF890BC28520613FDFACA9046AACA5
+3FDFD0451CB71E9D3FDFECB742F04D433FE0011B216385843FE00CFC1A6493C73FE018B0A8606A08
+3FE0243BC8A4D1F73FE0363015C304513FE047DD1C1BD6583FE05A69DC96DBCB3FE06D483E093F2D
+3FE08021F59D79583FE094952C0B24A73FE0A8ECE581BC513FE0BFB37330230D3FE0D5A8B1E8E1DF
+3FE0EC982E3A940C3FE1064BD1ED05193FE1231D559D24E73FE14405469BD50A3FE167B76545BFE8
+3FE1901C370FF2DC3FE1BE545C5A6DB63FE1F075FAA4F4BC3FE22494CCEB93B03FE259267839B134
+3FE28E9454B661153FE2C221B2B4CAEF3FE2F2679ACFD8653FE32356532C15CB3FE35547B9EDA7D1
+3FE38B3480B6EB953FE3C3AC3A7F662D3FE404ED345F07FE3FE44ABDF74072BD3FE4994B50F26328
+3FE4F30D8E5C8EAE3FE55227526B1BBE3FE5AD83F08852763FE60DD12745F78E3FE676591403FDEB
+3FE6F2ACDA5F99863FE77EB70997DF583FE80FBA72E76AF33FE8A2AD3B1578223FE9300BE24ECC3F
+3FE9BC7B26C5F82E3FEA558639D806173FEAFE0B817037AF3FEBA544C77B515D3FEC53F708F7B36D
+3FECFFC3A8708CE83FEDA3C175A958E93FEE4A56E72AE2DE3FEEB8FF9598A40D3FEF50CCD4BBED6B
+3FF0000000000000
+
+ 73F86B9ACB30FCCA63F96CDF7AE2495803FA01B126C51646A3FA4CAAD17488E03
+3FA8F3CEA279ECA93FAD2B9873F6B4963FB12B46E87729FC3FB392F66E5902703FB608A45E781817
+3FB87D65847A6E5F3FBAC948EDAD42983FBD4F82C37C2DA53FBFC223123771C43FC11C0845623D93
+3FC261D9451F15BE3FC3B619AB220ED53FC510009518F5DF3FC6713114A735A93FC7D42189EF887A
+3FC9203EC43A3C743FCA7175918332CD3FCB9D0D935444B73FCCDAE3F17C569C3FCE38017933D8D8
+3FCF7A44650E8AC53FD061F2F83374343FD105CA58A89C1B3FD1B6DE67CA42F03FD274183F01DEB7
+3FD3291A2C63DCF53FD3D5570141982E3FD47FF12AB8DFAA3FD52B07FF1B0D763FD5D1EFDB07A8C1
+3FD667D1BDC4AE5A3FD6FAD9895E79EE3FD7941CB28772EF3FD8371ED94553573FD8DA18B850CCEF
+3FD977B579B307EB3FDA1824F436C70C3FDABC8555C33D683FDB61D3A6DA18273FDC0698BF81E470
+3FDCB47C444939A93FDD70CBE826D9EB3FDE3532FFAA08323FDEFCA0D1A8582E3FDFB424A440A6A5
+3FE036251FB848FF3FE094ACFE3CEE063FE0F4B64FFC71CF3FE1545F2F6774A43FE1B1BAF0046653
+3FE209C742473B443FE25EDB1C3E9EB53FE2ACB1013B5BB53FE2FACA8D8A72F63FE346F0BC263DA8
+3FE3955469EF20383FE3E3F7F6D9CCA23FE4327A3D848AC03FE47EBFC0E6C1CD3FE4CA7E60B491E4
+3FE517CF69D70ED63FE569381BF8D26F3FE5C0382732B7903FE61ABFEE65AC6F3FE67205527D98D8
+3FE6C7FB3040DF683FE71B4285086A393FE76C008E1054363FE7BA5B8092D9783FE80BEF3399CAA3
+3FE865557CA595963FE8C7C0EF27E3AC3FE925893847284A3FE97ED18E245F613FE9D9B6B230AF1F
+3FEA2FD1C84277613FEA8ED1F5F912FF3FEAD8E6E73558193FEB1FEC865DA8793FEB4D2A0BFCDFC4
+3FEB7DBCB3076C833FEBB01A2FDBED3C3FEBE44AED95B4263FEC2E4511186A5C3FEC84E7D4089057
+3FECDA3972342C683FED2DF3635075A33FED86EC0ECA193F3FEDDC5824A610433FEE1F62711F349A
+3FEE5FDAF79B58533FEEA1E0E2ACBA3A3FEEEA05F938FBEF3FEF4497AB1B7C693FEFA09B1D5DA143
+3FF0000000000000
+
+ 83FCCA388462990123FD30CA77A8D48283FD5904C44DA5F603FD754C0F3DF4782
+3FD8B94137356DAA3FD9CA26F90A1B173FDAB60AB4ADD3513FDB847AA88502B53FDC3CAC9D15CB76
+3FDCED80A8BBD3C43FDD76631109A16C3FDDFDE98AABAA973FDE7EE6CEE25AF43FDF0EB885725862
+3FDF9B07529AA29B3FE00CCF598E82783FE0473A997587523FE080C6687D881C3FE0B6EA4043CA17
+3FE0E9A02E1C51993FE119AF1B156C3E3FE1437A9786B9D73FE1671E8BDB408D3FE18A255228FA11
+3FE1AB8A83268E303FE1DA2C29CAB5753FE20349DAC57B533FE22B8D8A0C935A3FE2546CBEE88FCA
+3FE27E57942167E93FE2A4FA745E3D8B3FE2CA94E824C6623FE2EF8650212B313FE314A755E2234F
+3FE33839F3AFC3F93FE35B383CB44DD03FE37D354F5089DE3FE39E71F9AAC49F3FE3BEBDBEAC3E7D
+3FE3DE5127E3001A3FE3FDB30259778D3FE41DC0A31FB8103FE43DC6ABCE6D6E3FE45CAF74577A7D
+3FE47B7A5F56784A3FE49A5D40E736D73FE4B9182CB0CCCE3FE4D738FEBDD3BE3FE4F4224CB4C220
+3FE510B20DADE0B13FE52CC02509C90C3FE54AA1B61178833FE567AE0491F6E83FE585BCE21D20D6
+3FE5A41688821A643FE5C3578B8033013FE5DFD6DD53F99D3FE5FAC7248B2FC03FE615B87CE73433
+3FE632CD61EC95503FE6526F760557423FE670F4E2480CA23FE68ED72894E7B13FE6ABD6132DC760
+3FE6CA283F60A3FF3FE6E92677BF95EA3FE707E59AE047993FE72598D0C2B8A53FE743DA066C8FE8
+3FE762905F0D01703FE7808628CFAD983FE79EFD810906203FE7BE0CE2ABED483FE7E05036462AA8
+3FE8031E029750393FE824F1AB28B49F3FE84780C6D24A503FE86BBBC27B30C93FE88AE25B41CB1B
+3FE8A9870552A5F83FE8C4C282F35A5E3FE8DB7F329F1BCA3FE8F3E73313156D3FE90D355D114E14
+3FE92776AA49BDA53FE9501B422FF7F33FE980D22D1B413C3FE9B48A77E7025A3FE9EA6A29B86483
+3FEA22E2FC12758C3FEA6320E47872113FEAACDE263C630F3FEB0DD4FC1936CC3FEBB7925B5CEF95
+3FECAF3ECB4D5DF73FED4FC63CEAB72E3FED974E104E0E233FEDF744AE5F342B3FEEA6D667FFA923
+3FF0000000000000
+
+ 93FC0A08DB1BF34AE3FC5C34F850918DE3FC85D272D9B2BE93FCA6D4F6C55170B
+3FCC1EB0347EA23F3FCDC602603A05D83FCF5B1A5F73A1413FD06783C19E45763FD1086FA2053FA9
+3FD19AF0BBAC5FBA3FD225C73E81BF583FD2ADA03B0CEE4F3FD33439DC7471513FD3B80994E108BF
+3FD439868835A7D23FD4B26F53F379803FD525F5AC4F9BE73FD595B958ABEF5B3FD6049765424CE3
+3FD675ABE4CF09D53FD6E0E01E90A48A3FD744ED307FE59B3FD79EC6F5F018BD3FD7FAF78A709003
+3FD85BBBCC3046623FD8C587835404593FD9317B8A8314AB3FD99635D39EF3CD3FD9DA8BA50AA41E
+3FDA0F7B9BD360973FDA42218EB4F6333FDA7654C6F915A93FDAB040F2477FD33FDB0A9F8074FD2D
+3FDB63EE74E7B7343FDBBA2547B4D09F3FDC0AC076DBFF363FDC5C0284174ED03FDCA458FA53F830
+3FDCF75E77E3791C3FDD4599B2BC5B983FDD97D233E7D8833FDDF3F5FC0B82DE3FDE4F85CC9E9ED2
+3FDEAC5F094B86203FDEFB1B20D039B23FDF44DD146424513FDF93256AF7E6663FDFE9830E6AC090
+3FE019D95163CFAF3FE0390D014A67F83FE055BA460CCC313FE072D8A462C34E3FE0982D3D146C70
+3FE0BC6BA8DF35163FE0E1F1B4591DFF3FE107C85B08DE7A3FE1307E3742BEDC3FE15CD79BD05ED4
+3FE188640FE60EC23FE1B1AA90533A173FE1D9ECD8F4AD143FE203730E7ED8A93FE22FA5E9B5F50E
+3FE25B52C9D65E963FE286A9B90A966F3FE2B3A51D99C61C3FE2E1F8DB044C3A3FE30E8CBB3EE86A
+3FE33BB0F3D95B9A3FE35F105FEA48D23FE382EF900F974F3FE3A6BFDCD22FED3FE3CC5BD81D5E66
+3FE3F9714F4B6DD33FE4297323D8BD003FE459A7EFDAB7803FE48B5CADD366FA3FE4BCB4749A66AE
+3FE4EF30360299AF3FE525A938C5AB723FE55E42FDE3D6B03FE59791EF30AD343FE5D461F7615266
+3FE614C1C9D6D8313FE659F28C50C9073FE69CAC26CD1EFF3FE6DA87394354143FE7195BC76E15D9
+3FE75AD96E8CF9EA3FE7A4F3DA8A5C923FE7F67AD5396F413FE84AA33CB6C26E3FE8AB68E1236CED
+3FE91437161F14AC3FE9854E5B57A7A53FEA04FA1D9877013FEAB7E665C4914F3FEC1E3D3820C81B
+3FF0000000000000
+
+ A3F847AE147AE14803F947AE147AE14803F9EB851EB851EC03FA47AE147AE1480
+3FA99999999999A03FAEB851EB851EC03FB1EB851EB851F03FB47AE147AE14803FB70A3D70A3D710
+3FB99999999999A03FBC28F5C28F5C303FBEB851EB851EC03FC0A3D70A3D70A83FC1EB851EB851F0
+3FC33333333333383FC47AE147AE14803FC5C28F5C28F5C83FC70A3D70A3D7103FC851EB851EB858
+3FC99999999999A03FCAE147AE147AE83FCC28F5C28F5C303FCD70A3D70A3D783FCEB851EB851EC0
+3FD00000000000043FD0A3D70A3D70A83FD147AE147AE14C3FD1EB851EB851F03FD28F5C28F5C294
+3FD33333333333383FD3D70A3D70A3DC3FD47AE147AE14803FD51EB851EB85243FD5C28F5C28F5C8
+3FD666666666666C3FD70A3D70A3D7103FD7AE147AE147B43FD851EB851EB8583FD8F5C28F5C28FC
+3FD99999999999A03FDA3D70A3D70A443FDAE147AE147AE83FDB851EB851EB8C3FDC28F5C28F5C30
+3FDCCCCCCCCCCCD43FDD70A3D70A3D783FDE147AE147AE1C3FDEB851EB851EC03FDF5C28F5C28F64
+3FE00000000000043FE051EB851EB8563FE0A3D70A3D70A83FE0F5C28F5C28FA3FE147AE147AE14C
+3FE199999999999E3FE1EB851EB851F03FE23D70A3D70A423FE28F5C28F5C2943FE2E147AE147AE6
+3FE33333333333383FE3851EB851EB8A3FE3D70A3D70A3DC3FE428F5C28F5C2E3FE47AE147AE1480
+3FE4CCCCCCCCCCD23FE51EB851EB85243FE570A3D70A3D763FE5C28F5C28F5C83FE6147AE147AE1A
+3FE666666666666C3FE6B851EB851EBE3FE70A3D70A3D7103FE75C28F5C28F623FE7AE147AE147B4
+3FE80000000000063FE851EB851EB8583FE8A3D70A3D70AA3FE8F5C28F5C28FC3FE947AE147AE14E
+3FE99999999999A03FE9EB851EB851F23FEA3D70A3D70A443FEA8F5C28F5C2963FEAE147AE147AE8
+3FEB33333333333A3FEB851EB851EB8C3FEBD70A3D70A3DE3FEC28F5C28F5C303FEC7AE147AE1482
+3FECCCCCCCCCCCD43FED1EB851EB85263FED70A3D70A3D773FEDC28F5C28F5C93FEE147AE147AE1B
+3FEE66666666666D3FEEB851EB851EBF3FEF0A3D70A3D7113FEF5C28F5C28F633FEFAE147AE147B5
+3FF0000000000000
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2017_I1487277/fnl3332.1jet.R-fastprod.run
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2017_I1487277/fnl3332.1jet.R-fastprod.run (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2017_I1487277/fnl3332.1jet.R-fastprod.run (revision 1772)
@@ -0,0 +1,193 @@
+NNLOJET_RUNCARD
+R-8TeV ! Job name id, must be less than 10 characters
+1jet ! Process name
+@EVENTS@ ! Number of events
+1 ! Number of iterations
+@SEED@ ! Seed number
+.false. ! Warmup
+.true. ! Production
+CT14nnlo ! PDF set
+0 ! PDF member
+antikt ! Jet algorithm, accepts 'kt', 'cam' or 'antikt'
+0.7d0 ! Rcut
+.false. ! exclusive
+0 ! Heavy particle decay type
+.1e-7 ! Technical cutoff y0
+.false. ! angular averaging of the phase space, default to true
+2 ! Virtual Integration method, use 2 if you're not sure
+all ! RR a/b region flag. Accepts 'a','b' or 'all'.
+0 ! set to zero for MC, 2 for point test
+.false. ! print max weight flag
+.true. ! momentum mapping and PDF storage flag
+.true. ! colour sampling flag
+.false. ! explicit pole check flag, stops integration when set to true
+
+PHYSICAL_PARAMETERS
+8000d0 ! roots
+125d0 ! Mass of the Higgs Boson
+0.004029643852d0 ! Width of the Higgs Boson
+91.1876d0 ! Mass of the Z Boson
+2.4952d0 ! Width of the Z Boson
+80.398d0 ! Mass of the W Boson
+2.1054d0 ! Width of the W Boson
+173.2d0 ! Mass of the Top Quark
+1.41d0 ! Width of the Top Quark
+4.18d0 ! Mass of the Bottom Quark
+0d0 ! Width of the Bottom Quark
+1.275d0 ! Mass of the Charm Quark
+0d0 ! Width of the Charm Quark
+
+! UNIT_PHASE
+
+SELECTORS
+ select jets_pt min = 21 max = 2500
+ select jets_abs_y max = 3.0
+ select njets min = 1
+END_SELECTORS
+
+
+
+HISTOGRAMS
+
+COMPOSITE > xptj0_y1 [21,24,28,32,37,43,49,56,64,74,84,97,114,133,153,174,196,220,245,272,300,330,362,395,430,468,507,548,592,638,686,737,790,846,905,967,1032,1101,1172,1248,1327,1410,1497,1588,1784,2116,2500] grid=ptji_incl_y1.fast
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y2 [21,24,28,32,37,43,49,56,64,74,84,97,114,133,153,174,196,220,245,272,300,330,362,395,430,468,507,548,592,638,686,737,790,846,905,967,1032,1101,1172,1248,1327,1410,1497,1588,1784,2116,2500] grid=ptji_incl_y2.fast
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y3 [21,24,28,32,37,43,49,56,64,74,84,97,114,133,153,174,196,220,245,272,300,330,362,395,430,468,507,548,592,638,686,737,790,846,905,967,1032,1101,1172,1248,1327,1410,1497,1588,1784,2116] grid=ptji_incl_y3.fast
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y4 [21,24,28,32,37,43,49,56,64,74,84,97,114,133,153,174,196,220,245,272,300,330,362,395,430,468,507,548,592,638,686,737,790,846,905,967,1032,1101,1172,1248,1327,1410] grid=ptji_incl_y4.fast
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y5 [21,24,28,32,37,43,49,56,64,74,84,97,114,133,153,174,196,220,245,272,300,330,362,395,430,468,507,548,592,638,686,737,790,846,905] grid=ptji_incl_y5.fast
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y6 [21,24,28,32,37,43,49,56,64,74,84,97,114,133,153,174,196,220,245,272,300,330,362,395,430,468,507,548] grid=ptji_incl_y6.fast
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=2.5 max=3.0
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=2.5 max=3.0
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=2.5 max=3.0
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=2.5 max=3.0
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+END_HISTOGRAMS
+
+SCALES
+ muf = ptj1 mur = ptj1
+ muf = 2.718281828 mur = 2.718281828
+ muf = 4.48168907 mur = 4.48168907
+ muf = 4.48168907 mur = 2.718281828
+ muf = 2.718281828 mur = 4.48168907
+ muf = 12.18249396 mur = 2.718281828
+ muf = 2.718281828 mur = 12.18249396
+END_SCALES
+
+!####### SYNTAX ######################
+!##
+!## REWEIGHT {observable-name}**{val_power}
+!##
+!#####################################
+
+! REWEIGHT ht_part**4
+! REWEIGHT ht_part**1.4 !# DB
+REWEIGHT ht_part**6.5 !# KR
+
+CHANNELS
+ R
+END_CHANNELS
+
+SETUP
+END_SETUP
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2017_I1487277/fnl3332.1jet.R-fastwarm.run
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2017_I1487277/fnl3332.1jet.R-fastwarm.run (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2017_I1487277/fnl3332.1jet.R-fastwarm.run (revision 1772)
@@ -0,0 +1,193 @@
+NNLOJET_RUNCARD
+R-8TeV ! Job name id, must be less than 10 characters
+1jet ! Process name
+@EVENTS@ ! Number of events
+1 ! Number of iterations
+@SEED@ ! Seed number
+.false. ! Warmup
+.true. ! Production
+CT14nnlo ! PDF set
+0 ! PDF member
+antikt ! Jet algorithm, accepts 'kt', 'cam' or 'antikt'
+0.7d0 ! Rcut
+.false. ! exclusive
+0 ! Heavy particle decay type
+.1e-7 ! Technical cutoff y0
+.false. ! angular averaging of the phase space, default to true
+2 ! Virtual Integration method, use 2 if you're not sure
+all ! RR a/b region flag. Accepts 'a','b' or 'all'.
+0 ! set to zero for MC, 2 for point test
+.false. ! print max weight flag
+.true. ! momentum mapping and PDF storage flag
+.true. ! colour sampling flag
+.false. ! explicit pole check flag, stops integration when set to true
+
+PHYSICAL_PARAMETERS
+8000d0 ! roots
+125d0 ! Mass of the Higgs Boson
+0.004029643852d0 ! Width of the Higgs Boson
+91.1876d0 ! Mass of the Z Boson
+2.4952d0 ! Width of the Z Boson
+80.398d0 ! Mass of the W Boson
+2.1054d0 ! Width of the W Boson
+173.2d0 ! Mass of the Top Quark
+1.41d0 ! Width of the Top Quark
+4.18d0 ! Mass of the Bottom Quark
+0d0 ! Width of the Bottom Quark
+1.275d0 ! Mass of the Charm Quark
+0d0 ! Width of the Charm Quark
+
+UNIT_PHASE
+
+SELECTORS
+ select jets_pt min = 21 max = 2500
+ select jets_abs_y max = 3.0
+ select njets min = 1
+END_SELECTORS
+
+
+
+HISTOGRAMS
+
+COMPOSITE > xptj0_y1 [21,24,28,32,37,43,49,56,64,74,84,97,114,133,153,174,196,220,245,272,300,330,362,395,430,468,507,548,592,638,686,737,790,846,905,967,1032,1101,1172,1248,1327,1410,1497,1588,1784,2116,2500] grid=ptji_incl_y1.fast
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y2 [21,24,28,32,37,43,49,56,64,74,84,97,114,133,153,174,196,220,245,272,300,330,362,395,430,468,507,548,592,638,686,737,790,846,905,967,1032,1101,1172,1248,1327,1410,1497,1588,1784,2116,2500] grid=ptji_incl_y2.fast
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y3 [21,24,28,32,37,43,49,56,64,74,84,97,114,133,153,174,196,220,245,272,300,330,362,395,430,468,507,548,592,638,686,737,790,846,905,967,1032,1101,1172,1248,1327,1410,1497,1588,1784,2116] grid=ptji_incl_y3.fast
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y4 [21,24,28,32,37,43,49,56,64,74,84,97,114,133,153,174,196,220,245,272,300,330,362,395,430,468,507,548,592,638,686,737,790,846,905,967,1032,1101,1172,1248,1327,1410] grid=ptji_incl_y4.fast
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y5 [21,24,28,32,37,43,49,56,64,74,84,97,114,133,153,174,196,220,245,272,300,330,362,395,430,468,507,548,592,638,686,737,790,846,905] grid=ptji_incl_y5.fast
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y6 [21,24,28,32,37,43,49,56,64,74,84,97,114,133,153,174,196,220,245,272,300,330,362,395,430,468,507,548] grid=ptji_incl_y6.fast
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=2.5 max=3.0
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=2.5 max=3.0
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=2.5 max=3.0
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=2.5 max=3.0
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+END_HISTOGRAMS
+
+SCALES
+ muf = ptj1 mur = ptj1
+ muf = 2.718281828 mur = 2.718281828
+ muf = 4.48168907 mur = 4.48168907
+ muf = 4.48168907 mur = 2.718281828
+ muf = 2.718281828 mur = 4.48168907
+ muf = 12.18249396 mur = 2.718281828
+ muf = 2.718281828 mur = 12.18249396
+END_SCALES
+
+!####### SYNTAX ######################
+!##
+!## REWEIGHT {observable-name}**{val_power}
+!##
+!#####################################
+
+! REWEIGHT ht_part**4
+! REWEIGHT ht_part**1.4 !# DB
+REWEIGHT ht_part**6.5 !# KR
+
+CHANNELS
+ R
+END_CHANNELS
+
+SETUP
+END_SETUP
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2017_I1487277/fnl3332.1jet.V-fastprod.run
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2017_I1487277/fnl3332.1jet.V-fastprod.run (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2017_I1487277/fnl3332.1jet.V-fastprod.run (revision 1772)
@@ -0,0 +1,193 @@
+NNLOJET_RUNCARD
+V-8TeV ! Job name id, must be less than 10 characters
+1jet ! Process name
+@EVENTS@ ! Number of events
+1 ! Number of iterations
+@SEED@ ! Seed number
+.false. ! Warmup
+.true. ! Production
+CT14nnlo ! PDF set
+0 ! PDF member
+antikt ! Jet algorithm, accepts 'kt', 'cam' or 'antikt'
+0.7d0 ! Rcut
+.false. ! exclusive
+0 ! Heavy particle decay type
+.1e-7 ! Technical cutoff y0
+.false. ! angular averaging of the phase space, default to true
+2 ! Virtual Integration method, use 2 if you're not sure
+all ! RR a/b region flag. Accepts 'a','b' or 'all'.
+0 ! set to zero for MC, 2 for point test
+.false. ! print max weight flag
+.true. ! momentum mapping and PDF storage flag
+.true. ! colour sampling flag
+.false. ! explicit pole check flag, stops integration when set to true
+
+PHYSICAL_PARAMETERS
+8000d0 ! roots
+125d0 ! Mass of the Higgs Boson
+0.004029643852d0 ! Width of the Higgs Boson
+91.1876d0 ! Mass of the Z Boson
+2.4952d0 ! Width of the Z Boson
+80.398d0 ! Mass of the W Boson
+2.1054d0 ! Width of the W Boson
+173.2d0 ! Mass of the Top Quark
+1.41d0 ! Width of the Top Quark
+4.18d0 ! Mass of the Bottom Quark
+0d0 ! Width of the Bottom Quark
+1.275d0 ! Mass of the Charm Quark
+0d0 ! Width of the Charm Quark
+
+! UNIT_PHASE
+
+SELECTORS
+ select jets_pt min = 21 max = 2500
+ select jets_abs_y max = 3.0
+ select njets min = 1
+END_SELECTORS
+
+
+
+HISTOGRAMS
+
+COMPOSITE > xptj0_y1 [21,24,28,32,37,43,49,56,64,74,84,97,114,133,153,174,196,220,245,272,300,330,362,395,430,468,507,548,592,638,686,737,790,846,905,967,1032,1101,1172,1248,1327,1410,1497,1588,1784,2116,2500] grid=ptji_incl_y1.fast
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y2 [21,24,28,32,37,43,49,56,64,74,84,97,114,133,153,174,196,220,245,272,300,330,362,395,430,468,507,548,592,638,686,737,790,846,905,967,1032,1101,1172,1248,1327,1410,1497,1588,1784,2116,2500] grid=ptji_incl_y2.fast
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y3 [21,24,28,32,37,43,49,56,64,74,84,97,114,133,153,174,196,220,245,272,300,330,362,395,430,468,507,548,592,638,686,737,790,846,905,967,1032,1101,1172,1248,1327,1410,1497,1588,1784,2116] grid=ptji_incl_y3.fast
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y4 [21,24,28,32,37,43,49,56,64,74,84,97,114,133,153,174,196,220,245,272,300,330,362,395,430,468,507,548,592,638,686,737,790,846,905,967,1032,1101,1172,1248,1327,1410] grid=ptji_incl_y4.fast
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y5 [21,24,28,32,37,43,49,56,64,74,84,97,114,133,153,174,196,220,245,272,300,330,362,395,430,468,507,548,592,638,686,737,790,846,905] grid=ptji_incl_y5.fast
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y6 [21,24,28,32,37,43,49,56,64,74,84,97,114,133,153,174,196,220,245,272,300,330,362,395,430,468,507,548] grid=ptji_incl_y6.fast
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=2.5 max=3.0
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=2.5 max=3.0
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=2.5 max=3.0
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=2.5 max=3.0
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+END_HISTOGRAMS
+
+SCALES
+ muf = ptj1 mur = ptj1
+ muf = 2.718281828 mur = 2.718281828
+ muf = 4.48168907 mur = 4.48168907
+ muf = 4.48168907 mur = 2.718281828
+ muf = 2.718281828 mur = 4.48168907
+ muf = 12.18249396 mur = 2.718281828
+ muf = 2.718281828 mur = 12.18249396
+END_SCALES
+
+!####### SYNTAX ######################
+!##
+!## REWEIGHT {observable-name}**{val_power}
+!##
+!#####################################
+
+! REWEIGHT ht_part**4
+! REWEIGHT ht_part**1.4 !# DB
+REWEIGHT ht_part**6.5 !# KR
+
+CHANNELS
+ V
+END_CHANNELS
+
+SETUP
+END_SETUP
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2017_I1487277/1jet.RV-8TeV.y.1e-7.vRa
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2017_I1487277/1jet.RV-8TeV.y.1e-7.vRa (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2017_I1487277/1jet.RV-8TeV.y.1e-7.vRa (revision 1772)
@@ -0,0 +1,198 @@
+
+ 13EF34E25EC9715F53F079510889838743F2B211B4384FF8C3F46BB53D8A53CB0
+3F526C75C4F591403F56E7C4DBBDD48B3F5AA7F27F0594E63F5EDBC165CEAFEC3F620D3ABB42D066
+3F6510F645EF04BC3F684107F0AE6FE73F6BDBB78B5464653F6FFB7209FD35113F725A50537B3F1D
+3F750080C7CFDDA63F7809D39A8D8C3C3F7B4E424E4983D03F7EBBE3FCF281E73F81200CE17BDFE7
+3F8310907E78050D3F850E8DA95B52C93F8724A537600AC03F893BF092502EDA3F8B550B16010FF5
+3F8D68D3C8CBDBEA3F8FEA5B49ECD32E3F913E888388C6463F929B7B2D9CD8FF3F94191E9B0D1BA9
+3F95985687A2048A3F9724839ED605203F98B1EF300998083F9A4FCFB66FC14D3F9C09AE702F3056
+3F9DD55EA311A8D73F9FAAFAB8AF7EAD3FA0C62652B346B63FA1BC0410A73F5D3FA2B8BCC4DCAF27
+3FA3BDC236D57E143FA4CA3E222B7E9B3FA5DEDE7D77C0A63FA6FB14C51163303FA820DB9452D48E
+3FA94ED287CC0EE93FAA844CA6D873CE3FABBF9FAF82BF703FAD01D072BD71743FAE4DA3A380239A
+3FAF9E98E6BFB4E73FB07D0E4F82DAF13FB12FCABE3DD5FA3FB1E908133766ED3FB2A78ED33ECE81
+3FB36C51F0319BA53FB438F30D2E804C3FB50B8F143605763FB5E37E758FCA563FB6BFDFE93A7231
+3FB7A1F84D4C08A33FB88A2F759913C33FB9790B69C26E9A3FBA6E7A029DF00B3FBB6DAF7FD1526A
+3FBC70E7E4EFEA003FBD8109A8656B5F3FBEA8E596166EBD3FBFC529C2992E2A3FC060CF9C277736
+3FC0EEB775C1852B3FC17A3DC31850C73FC2060FA69E3C653FC2AFA9CFFF1CDE3FC3624A2C70F939
+3FC412C51EEC12563FC4CD1CE856E7993FC58D27FD34801A3FC6565A68EB79733FC728D38B220A02
+3FC805D6F0B5E26F3FC8EB9E1E171B1C3FC9DCD7A1FA3ABF3FCAD94D3588E3133FCBE22F2F195DB7
+3FCCF8AD21182B503FCE1D0C07933DEC3FCF51C6CADABF8E3FD04D506967707E3FD0FBFC676C9D5B
+3FD1B6EB8C7D7E333FD27E8802CEACC93FD356F5F085C04C3FD4445E7C630B1C3FD54AA24670EA6A
+3FD670EBF5863DF43FD7C45C2EC3D3473FD951B1BD2D13523FDB743BB743D50C3FE21423826AE40F
+3FF0000000000000
+
+ 23FB6171E0CCA5D0E3FC22ACD820F3A683FC726B3EA0991DC3FCBB88848158C48
+3FCFED5CACB8D5E93FD1E7FE9CF1D6C83FD3C29DDF9B00913FD566D8CABD7C923FD6D6A7A9850DE7
+3FD82CF6CA20DF6D3FD95D4F78BBDBDD3FDA9747C356067F3FDBA4533D6A6F873FDCA03362A5C2E0
+3FDD984C127F7F403FDE856425C4CE493FDF6A5A8EF1038A3FE017F3EF1419783FE066A4EF150AAC
+3FE0A707075383A43FE0E320C45AB8DC3FE11DA6BD5535BA3FE16149DF8B217B3FE1A603F5A31551
+3FE1E7BD5A8D85373FE224C226597FBE3FE261FB3A05C0123FE2A3EA1E41086B3FE2E481D9755312
+3FE324F5D250F2013FE3639D10DAD9233FE3A394EB772A523FE3E64BAB5FCF4C3FE4276C909CEB05
+3FE46BA0EA5A786F3FE4ACACF1FAA4A53FE4E6FD5E3D3DAD3FE51F497DA857E93FE555F60E80441F
+3FE59147741A68BE3FE5D1134A72B0EB3FE60E80CFEBE7853FE64AF02E511D2A3FE686B6E641BC9D
+3FE6C27BB1F98DE33FE7011C58A608A83FE73EDDA579FB853FE77B3C2C23CB053FE7B6EF579BE4C3
+3FE7F0BB4687A4923FE827E79C8773BB3FE85D321BCFBCE53FE891A3BE0C0C0B3FE8C62FDA9B86C0
+3FE8FB31F9AFC35F3FE92F9C5BEFDC2A3FE96307A7EA564D3FE995722C0EA4703FE9C68754F1F27C
+3FE9F6C96D5985F93FEA25E7B92578E53FEA53A12CAE26393FEA8122DC7D288F3FEAADFEEBE6E6DE
+3FEADAC0E44604793FEB06D566FB41B23FEB3204D9E5298D3FEB5D1D40BB24A23FEB8621E95B01E8
+3FEBAEC85038F32B3FEBD6C389A939B43FEBFF4F6D8B5F1B3FEC27BD33BBF3C53FEC4FA662386369
+3FEC76E967844C743FEC9D3F475584C23FECC36AAA6A103D3FECE8BBE47456853FED0D2632D1A760
+3FED313B6F92F34C3FED556EAF59C0D43FED798D11BB2B033FED9D766E0E6BAD3FEDC2A5BB0B324F
+3FEDE568B0DA322F3FEE0404C496A4283FEE234E435508F53FEE42A891EC9E4D3FEE5DA14375AFBC
+3FEE81556F9BCB473FEEA4B0DE06D77D3FEEC62F496EA20E3FEEE8B2227AA0AC3FEF0AF2EC1E1BB0
+3FEF2FA621DF90573FEF5201BDE628DE3FEF7805916C744D3FEF9F365878B20B3FEFCA5810F006BD
+3FF0000000000000
+
+ 33FC853C5B99846F83FD0D777C676A9243FD26EA587835BF63FD3A132B32D27D8
+3FD46F2FBC2857B23FD502E26D9A77D13FD58474459330703FD5F4C91D8A0DE23FD673BCE2CF52D0
+3FD6EF72184F608B3FD76A558D9E33443FD7D6343F9177093FD836B5F7668E0D3FD88C758934CC37
+3FD8DB8C4F1A57063FD9271CFD4050D23FD96E81B67F05543FD9B6785E05AECB3FD9F9E666872937
+3FDA3AB8DBC1DFED3FDA78366AB67D853FDAB3190A4FDDBB3FDAEB06A820AA5D3FDB221A86137B06
+3FDB570588FF39293FDB8A07A4FA88303FDBBBEB21900B863FDBED223F55158B3FDC1E96A826377A
+3FDC4FE48F2D21AF3FDC8136759E48BD3FDCB22EEB10E5F33FDCE29946AEBDC23FDD1302F85EAA59
+3FDD4385EFEBEB943FDD7357477C26983FDDA4637105DF5F3FDDD79C47C0F37C3FDE045FF984A6A7
+3FDE313A9BAB2E1D3FDE5F7C8D6A6C6C3FDE8B43514827183FDEBA9DBBC00E983FDEF0AC41A4B2EA
+3FDF22A26FD5E9FE3FDF5379CC19C91E3FDF8631E41DCF543FDFB818F280CE193FDFE9BE3A5D75B1
+3FE00D2F1C7D42093FE024E7416F03143FE03D1DED660E8D3FE0556828884C303FE06E6EC04CC561
+3FE08852FA3546433FE0A243B3E4972D3FE0BADA88469BB03FE0D1BE6FF76AB53FE0E8B7101618F7
+3FE0FEAFC28723AC3FE117D1869137173FE12FF810E2B7203FE148A9DC5D2AB83FE160F21FD222D8
+3FE17953F270C7D13FE1915408E195993FE1A92BC6386E033FE1C12FDB1F29423FE1D930F14054F9
+3FE1F14C382841BE3FE209B3B6564BAD3FE22248692B19703FE23B4292C3DA523FE254EDFFEC43ED
+3FE26F72B86CFAB73FE28B1F36D0EF0B3FE2A7EDA05627CC3FE2C5A274EA8A733FE2E4EBC2C0C0E4
+3FE306584575305D3FE3294262C7B0633FE34D8F246C5B693FE36F0BCC02C9513FE38F25D37A58F0
+3FE3B07B00664FF83FE3D0556271EFA53FE3F6D300683C243FE4235B8A9D45D43FE456F9631D3DD0
+3FE4906250DB4D373FE4C8662E83D5BE3FE5021C6FA8B8783FE53B91A4C7FADE3FE580B72F35BC00
+3FE5CD65553324FE3FE6316F1FEFA7583FE6BE98A0B174C33FE7A51EA9A63BFF3FE9EEAA01602246
+3FF0000000000000
+
+ 43F87DEB96F5580D83F9744450DC5A26C3FA18752983FEB533FA6E937134D2DA0
+3FAC314A262BFF563FB0B45DA39A2AD73FB32FB20477E7A13FB5AB359FDBF6113FB82CC0915F9D6B
+3FBABAA1301815813FBD46FF8ABA233D3FBFCC48552D977E3FC125A85AEBA9473FC26C633735B3B8
+3FC3C182EBB376273FC4FA8542EA08C03FC62A6438DDFC613FC75490E75A87683FC88CF8F70BE851
+3FC9D0E306871E1E3FCB14AD6AF8692F3FCC5C222E9685153FCDAF7D54142A243FCEF60CA51726D5
+3FD012E868301BEB3FD0A1995E15718B3FD138045C6B53F43FD1C9CF155AC1DC3FD26C666DD85EDB
+3FD30E8E160F3B093FD3B2C79DA2548C3FD45604B0259C1E3FD4F2D627F69B6D3FD58D54854B5351
+3FD627DB47198FC03FD6C8728749A68D3FD76AEF88C6A2B73FD80B7B70FA2DAF3FD8A96AC4E5B69E
+3FD94A30175D5BC53FD9F0F4FEBA3F203FDA98411545DDF23FDB473609E7F9533FDBFAAB12A62541
+3FDCB0ECB0D40BC23FDD6CE9527313633FDE305B2F4955A73FDEE9F987A0DC403FDFA77D656C8150
+3FE0317A0EA42A713FE090EE711EEA873FE0E8C4A0FB8B263FE142C6B908A57A3FE1912088DF3228
+3FE1DF97FC4D22893FE22EB7658BA6DF3FE279E45505A87D3FE2C14ABFD413A83FE31B6BAEAA0C79
+3FE3703154B9E4FD3FE3C238A74052A73FE414B3537DB28D3FE466091F913E4B3FE4B381E8B3E0D5
+3FE4FFCD5F66A7303FE54DF530DBD7903FE59F0A82A5F5173FE5F1C8D7AED9283FE6424A29B5DF03
+3FE68DBE159A4E7E3FE6D7A37B99319B3FE72459704168433FE7737E62C46F743FE7C5C9480D51A9
+3FE81882A91121673FE869B353D281003FE8B8780099DA193FE9079C4A2C6CA23FE955EB354D6872
+3FE9A888FFE6C7573FE9F700E8973FBB3FEA45FE4609B8FF3FEA979CD6E9C7433FEAE81F222380DB
+3FEB39C0524401113FEB8DCFF00ECC703FEBD542418CEFF33FEC229178533FBF3FEC6F874C7D1AC7
+3FECC0D49D338E493FED126C6889DEF93FED5C2D29EE2C463FEDA589599B6E833FEDF2CF1C7CD6F3
+3FEE47D2928005233FEEA41BB83299B03FEF009FB05DA8853FEF5861DDCE02B53FEFAEFE2265D6EB
+3FF0000000000000
+
+ 53FCCE2FA261458343FD3B33C7EE7C3593FD6215C03350C7B3FD7F5115FF5FF27
+3FD96173852A7EFC3FDA8B2A33141ADE3FDB8B076F6C7B763FDC69476635CB7A3FDD3060279ECDCE
+3FDDD8E335A3CEAC3FDE813BF621EC033FDF1A4D2B4817713FDFA8B598C95AB83FE018DF7C636FF5
+3FE058D8A4A2F0F93FE0956D1232C1EE3FE0CFBF2AD3D0A53FE106BC0E5F37AD3FE13B6E10D1E514
+3FE16E1093D9CDB63FE19E7C5661F7DA3FE1CD51E10CDBEC3FE1F9EAC87685183FE22414C3D0DE21
+3FE24DB78F05DEFC3FE27658AC7656B83FE29F109B4E45B83FE2C6C9BF3945423FE2ED9DC01E7CD6
+3FE313888689A88A3FE338A12CA5E63B3FE35D8F0D7904673FE380F29BBD33B83FE3A3766A09EF23
+3FE3C5D195FF333E3FE3E7F22180CC273FE40A621D81B2FD3FE42A4D780D28353FE44819A4F9CD1D
+3FE4668B2A60BB5C3FE485BD8ADB758F3FE4A5DCD01ABAF63FE4C58AE2B98BC93FE4E49F3CB4EAE8
+3FE50389183F0F9E3FE521ED7E5A512A3FE53DFDD09A12333FE55859083161803FE572804F1335E3
+3FE58E25C3F950753FE5ACB50E663C803FE5CB45F619CC563FE5E9BD5D3782AB3FE608AE41A4ECB5
+3FE627B73BD86EC23FE6468061953C303FE6654CE4AB529E3FE683E954DF90EA3FE6A2FB460DA288
+3FE6C248EE597BB03FE6E1CCEE4286283FE702C1D5219BDF3FE723BC6D15BBD13FE7406B69834456
+3FE75D6026FA10A53FE77CD8E031248B3FE79682C5B6D5043FE7BB68AE96AAA03FE7DFA881A8B065
+3FE802BAA1EDAB9E3FE82749B56E6FD33FE84D2150EC6BD33FE8749C7EAD64C93FE89E6652569AB3
+3FE8C9457A2135D53FE8F58AE8F8C0E93FE924F02716498A3FE957169E4893223FE98E16448BF8B0
+3FE9CB561E314EB33FEA10524AC88A203FEA5DC5A73F48C53FEABA58A026BC7C3FEB4D20C99CAE5E
+3FEC778176649B383FED1534C1352AE23FED42E24D683A3C3FED5204CC6099CE3FED5DFF5F757C23
+3FED6A2E88FD64483FED79ABDFA737193FED8843ECCF7E293FED96ED6EE093793FEDA83869CFEDE9
+3FEDBBB7EF953D973FEDD2AD3F5263183FEDEEF12160C6A33FEE0F4695388A373FEE7D91722C2ED7
+3FF0000000000000
+
+ 63FBC9CC65BE99EB23FC4B42BE971E7213FC7AA779D71C28E3FC9FF2A3C1A7187
+3FCC0CCD06508CAF3FCDD0CA38121C693FCF602F62A6DB5F3FD05C1E47CF0B893FD0F9918E5E6985
+3FD186DF2C7931353FD20ABA4755B6C03FD28A181CA056CC3FD3035DA371E0323FD37C037AE5888B
+3FD3EDC08DC25AD53FD45D8798B6A3963FD4D1CA58FF8A8D3FD5465EC666E7853FD5B6AF2E0E8A2C
+3FD62094731B605A3FD67D2598F115D53FD6D1D94A9D0B263FD727AA69B6F9583FD77E5203FA9450
+3FD7DB00E7E031A23FD839CC4242AAF73FD896BE794597423FD8F3FB820D60F43FD95146DB2DA7F4
+3FD9ADC4B09623D93FDA07EBF557150C3FDA5D73D66038A13FDAAFE657C25EFC3FDB016580A4C845
+3FDB5376C0D1006E3FDBAAFECF41CAFE3FDBF9BFCADF37B63FDC4CCA79D0BCF43FDC9844FC938EFE
+3FDCECDB629C0BBA3FDD3F0DD23233603FDD915E64967F5C3FDDDF7DEB2D809D3FDE2BE0197F6B91
+3FDE6F42CD6EAE9C3FDEB70E2EE777D53FDEF4685616720F3FDF3459967E9B603FDF85CCB58F3633
+3FDFD87D3AD3D3483FE0132ABC21A0D23FE036E4DA5C16C83FE0588A9968ABC03FE07B3174F08011
+3FE09EDA745A327B3FE0C8283371922F3FE0F28FFA150F963FE11BBEAF39D2EC3FE142FDA36E781F
+3FE16A9CEA9D7C1C3FE1935AAB5136053FE1BCCB49D445883FE1E65042E13D913FE21121766DB6B5
+3FE23C9E4D320B193FE265BBEDC0B79F3FE28D9F182D54163FE2B4FF1C878F1E3FE2DCBA902252E7
+3FE306DC8C7B9BC53FE334103505122A3FE35D9F2701EC793FE38641E514335E3FE3B056D4326654
+3FE3DD7ABC0EF4303FE40F6A91BDD8123FE440B92393D5B53FE472D7EEF3B3FF3FE4A4F10B09AB46
+3FE4D6B647E89A613FE50A6CED40A9383FE53EF0289BC6693FE575721370AA2B3FE5AE1630807B66
+3FE5E99ED633E7AF3FE62948C3A51F173FE66997F1B444173FE6AAD3FF53AFDF3FE6EE0CBC4A5A78
+3FE734522A00AA023FE7808C541C08C53FE7D22BEED56A213FE82D0D59A9A7D33FE88E8D3558C812
+3FE8F6F8BE4A6AC83FE96F9AFBE950853FE9FEBD5A03FBC03FEAB8F73418B5CC3FEC288D19FB06C5
+3FF0000000000000
+
+ 73F87A464D0B14DCD3F9769B29D57EE0E3FA17DE9C0E0A9833FA7348657E6B15C
+3FACB14F6F7139283FB110CC342CBA683FB3D11125CCA5103FB65F98E55117173FB8DEDCA1850328
+3FBB74AA454F6AD33FBE4ABA9BC860643FC0A2213D7381713FC21ECF2A093EA43FC3A3CD5DBDA3CE
+3FC52088DA36877C3FC68BDC6E7AC0DE3FC7E62BC8FC0E133FC943291EE87A533FCAA853EECDEAE2
+3FCC11F6E3E45B3B3FCD7A84D5B6B0D63FCEDC0465F7AD293FD02032F88681593FD0D30898CBC5A0
+3FD1835C1FEE95F73FD2320D406783B43FD2E1230ACF33083FD39CEC5258A5553FD45A5C07514FBF
+3FD512B43DD96DC93FD5C2FE163408633FD67272DD886A1F3FD725357E0B343C3FD7DA8916F96BD7
+3FD88B11B469D4593FD938B392E026033FD9E658E899B3233FDA8AE483BCC47A3FDB268FB5937CDE
+3FDBC25F1358EE8A3FDC69867831E99D3FDD1928960C9C9F3FDDCB3E7C73B5873FDE7A2D0FD048F1
+3FDF2FB9CA84D0FC3FDFE2496285D9893FE04BF6D17B5F6B3FE0A87967EAE7443FE10433AF71DC21
+3FE15A872A1699553FE1ADCDC141A2B43FE20009E1E68E023FE25C2863B4A10C3FE2AF4A283C727E
+3FE2FA0110DC81B23FE34B17FBBBFF7B3FE396391E99DD2C3FE3EA6F2DA962043FE444454C475EA1
+3FE49ACCB95D22443FE4EE9F8BBA22473FE53AC4ECC53E433FE587A1029C31AF3FE5D432D920C955
+3FE623B4C2BA16FB3FE6784081FFDB9F3FE6CBBF11279CF53FE71EA673F5493F3FE76DDBF7232C5C
+3FE7BDDCDF3F9EDD3FE80C22BAC4801B3FE85DDEB27B589C3FE8B218AD12D55C3FE907A90F5A44F9
+3FE94FD5B3916E173FE99518536A5EF53FE9DB813D92D60A3FEA1C97BE6373133FEA6B21DB0575DC
+3FEABB6F41F6D97F3FEB0A786173EBA73FEB5882842413BF3FEBA380636D8CEA3FEBED9160FAAE48
+3FEC33008FE7C0213FEC7B9E05A36A7C3FECC370665F60493FED0C38EF11B5BC3FED54B0CCE5AE72
+3FED9CB55C2DFD3D3FEDE21E6DF41D813FEE23EF50A0848A3FEE653EB6170D733FEEA67FEC259F2F
+3FEEE990F6E441353FEF28FE160870983FEF64FE6CE7CEF23FEF9C43B3FC66563FEFCED1A0CFD179
+3FF0000000000000
+
+ 83F86D04049FBC7623F97524F4F96E1B33FA188376A6782933FA7418103690A88
+3FACE02ABE550BA23FB1290B87799E443FB43A1057A61F473FB73FAACEF18E5C3FBA285ACBFEB822
+3FBD0CAE9A796C583FC00083340EF1A03FC1889AFB3D78D43FC30E65EE225EBC3FC4850090E8264E
+3FC5F9AA6BF77D1E3FC76F97875CB0E63FC8E3AE74A674543FCA4A67C05958C63FCB9CD15717DA73
+3FCCEC31E6F1AA343FCE2C5A5B9B6F2E3FCF6896554F9C553FD058313C9CF2E83FD1096B1B5253CC
+3FD1C9676A03D88E3FD27FFE81FB3CDD3FD331371FD59DE23FD3DD6750158DCA3FD4848DB7313E40
+3FD52CA5075183403FD5D6D8E21E1EA63FD682B753D43B8C3FD738CBF58CE37A3FD7ED02EE61AFEE
+3FD89D9B9781ABBA3FD9521554A06F423FDA0A1A22AD87963FDAC929EBE243203FDB6AE209CF930C
+3FDC08214D0803E73FDCA492BFF4FF103FDD47FCEF6C14E23FDDF5873AA7D5953FDEA30711592294
+3FDF4FFB08FF56183FDFFE19F1FC0A0F3FE05467CD1CC14C3FE0A7946E3999D13FE0F67A02ED543D
+3FE1464178A2C26C3FE1982806077CB93FE1ED2B4104AB573FE241059233D5B23FE29103479970AC
+3FE2E662E730367F3FE335ABD92CA8EB3FE395FC86D9A0133FE3E72F3D4B7DAB3FE434DB76417686
+3FE47FC87A06372A3FE4CCDA0EA29B693FE52185826DF71F3FE574FC6ED3DFA03FE5C7350DC5119A
+3FE61AA48B35662C3FE66D4E27AE6E423FE6BED628078BDF3FE710E9ED53846E3FE764239E5E5487
+3FE7B65CF8E91CA33FE80726B6D649A73FE8590D58B314D93FE8AB33B99064B83FE8FD5B85256CF2
+3FE94D484941BF853FE99D361E1DAAFE3FE9EC72C88FC91D3FEA3B6DFDBD86383FEA8647EC882DF9
+3FEACBEBAF8113C03FEB117F7063C4003FEB57E46E6486833FEBA223E2C48F213FEBEB866D07C66C
+3FEC356CD6AA7B6C3FEC82665E7C8E023FECCE5BCE36413D3FED18B8BB57BE563FED61DA857167FD
+3FEDA8C3AA45AEE63FEDEE6405C59E673FEE3353B07D1AF73FEE77E71AE09BBC3FEEBF1BB4C6AE3D
+3FEEF6A016D3F9D33FEF2A8826C872343FEF5E87575C891D3FEF8A1DD0BC81E93FEFC68A633D6A72
+3FF0000000000000
+
+ 93F847AE147AE14803F947AE147AE14803F9EB851EB851EC03FA47AE147AE1480
+3FA99999999999A03FAEB851EB851EC03FB1EB851EB851F03FB47AE147AE14803FB70A3D70A3D710
+3FB99999999999A03FBC28F5C28F5C303FBEB851EB851EC03FC0A3D70A3D70A83FC1EB851EB851F0
+3FC33333333333383FC47AE147AE14803FC5C28F5C28F5C83FC70A3D70A3D7103FC851EB851EB858
+3FC99999999999A03FCAE147AE147AE83FCC28F5C28F5C303FCD70A3D70A3D783FCEB851EB851EC0
+3FD00000000000043FD0A3D70A3D70A83FD147AE147AE14C3FD1EB851EB851F03FD28F5C28F5C294
+3FD33333333333383FD3D70A3D70A3DC3FD47AE147AE14803FD51EB851EB85243FD5C28F5C28F5C8
+3FD666666666666C3FD70A3D70A3D7103FD7AE147AE147B43FD851EB851EB8583FD8F5C28F5C28FC
+3FD99999999999A03FDA3D70A3D70A443FDAE147AE147AE83FDB851EB851EB8C3FDC28F5C28F5C30
+3FDCCCCCCCCCCCD43FDD70A3D70A3D783FDE147AE147AE1C3FDEB851EB851EC03FDF5C28F5C28F64
+3FE00000000000043FE051EB851EB8563FE0A3D70A3D70A83FE0F5C28F5C28FA3FE147AE147AE14C
+3FE199999999999E3FE1EB851EB851F03FE23D70A3D70A423FE28F5C28F5C2943FE2E147AE147AE6
+3FE33333333333383FE3851EB851EB8A3FE3D70A3D70A3DC3FE428F5C28F5C2E3FE47AE147AE1480
+3FE4CCCCCCCCCCD23FE51EB851EB85243FE570A3D70A3D763FE5C28F5C28F5C83FE6147AE147AE1A
+3FE666666666666C3FE6B851EB851EBE3FE70A3D70A3D7103FE75C28F5C28F623FE7AE147AE147B4
+3FE80000000000063FE851EB851EB8583FE8A3D70A3D70AA3FE8F5C28F5C28FC3FE947AE147AE14E
+3FE99999999999A03FE9EB851EB851F23FEA3D70A3D70A443FEA8F5C28F5C2963FEAE147AE147AE8
+3FEB33333333333A3FEB851EB851EB8C3FEBD70A3D70A3DE3FEC28F5C28F5C303FEC7AE147AE1482
+3FECCCCCCCCCCCD43FED1EB851EB85263FED70A3D70A3D773FEDC28F5C28F5C93FEE147AE147AE1B
+3FEE66666666666D3FEEB851EB851EBF3FEF0A3D70A3D7113FEF5C28F5C28F633FEFAE147AE147B5
+3FF0000000000000
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2017_I1487277/fnl3332.1jet.V-fastwarm.run
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2017_I1487277/fnl3332.1jet.V-fastwarm.run (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2017_I1487277/fnl3332.1jet.V-fastwarm.run (revision 1772)
@@ -0,0 +1,193 @@
+NNLOJET_RUNCARD
+V-8TeV ! Job name id, must be less than 10 characters
+1jet ! Process name
+@EVENTS@ ! Number of events
+1 ! Number of iterations
+@SEED@ ! Seed number
+.false. ! Warmup
+.true. ! Production
+CT14nnlo ! PDF set
+0 ! PDF member
+antikt ! Jet algorithm, accepts 'kt', 'cam' or 'antikt'
+0.7d0 ! Rcut
+.false. ! exclusive
+0 ! Heavy particle decay type
+.1e-7 ! Technical cutoff y0
+.false. ! angular averaging of the phase space, default to true
+2 ! Virtual Integration method, use 2 if you're not sure
+all ! RR a/b region flag. Accepts 'a','b' or 'all'.
+0 ! set to zero for MC, 2 for point test
+.false. ! print max weight flag
+.true. ! momentum mapping and PDF storage flag
+.true. ! colour sampling flag
+.false. ! explicit pole check flag, stops integration when set to true
+
+PHYSICAL_PARAMETERS
+8000d0 ! roots
+125d0 ! Mass of the Higgs Boson
+0.004029643852d0 ! Width of the Higgs Boson
+91.1876d0 ! Mass of the Z Boson
+2.4952d0 ! Width of the Z Boson
+80.398d0 ! Mass of the W Boson
+2.1054d0 ! Width of the W Boson
+173.2d0 ! Mass of the Top Quark
+1.41d0 ! Width of the Top Quark
+4.18d0 ! Mass of the Bottom Quark
+0d0 ! Width of the Bottom Quark
+1.275d0 ! Mass of the Charm Quark
+0d0 ! Width of the Charm Quark
+
+UNIT_PHASE
+
+SELECTORS
+ select jets_pt min = 21 max = 2500
+ select jets_abs_y max = 3.0
+ select njets min = 1
+END_SELECTORS
+
+
+
+HISTOGRAMS
+
+COMPOSITE > xptj0_y1 [21,24,28,32,37,43,49,56,64,74,84,97,114,133,153,174,196,220,245,272,300,330,362,395,430,468,507,548,592,638,686,737,790,846,905,967,1032,1101,1172,1248,1327,1410,1497,1588,1784,2116,2500] grid=ptji_incl_y1.fast
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y2 [21,24,28,32,37,43,49,56,64,74,84,97,114,133,153,174,196,220,245,272,300,330,362,395,430,468,507,548,592,638,686,737,790,846,905,967,1032,1101,1172,1248,1327,1410,1497,1588,1784,2116,2500] grid=ptji_incl_y2.fast
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y3 [21,24,28,32,37,43,49,56,64,74,84,97,114,133,153,174,196,220,245,272,300,330,362,395,430,468,507,548,592,638,686,737,790,846,905,967,1032,1101,1172,1248,1327,1410,1497,1588,1784,2116] grid=ptji_incl_y3.fast
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y4 [21,24,28,32,37,43,49,56,64,74,84,97,114,133,153,174,196,220,245,272,300,330,362,395,430,468,507,548,592,638,686,737,790,846,905,967,1032,1101,1172,1248,1327,1410] grid=ptji_incl_y4.fast
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y5 [21,24,28,32,37,43,49,56,64,74,84,97,114,133,153,174,196,220,245,272,300,330,362,395,430,468,507,548,592,638,686,737,790,846,905] grid=ptji_incl_y5.fast
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y6 [21,24,28,32,37,43,49,56,64,74,84,97,114,133,153,174,196,220,245,272,300,330,362,395,430,468,507,548] grid=ptji_incl_y6.fast
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=2.5 max=3.0
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=2.5 max=3.0
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=2.5 max=3.0
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=2.5 max=3.0
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+END_HISTOGRAMS
+
+SCALES
+ muf = ptj1 mur = ptj1
+ muf = 2.718281828 mur = 2.718281828
+ muf = 4.48168907 mur = 4.48168907
+ muf = 4.48168907 mur = 2.718281828
+ muf = 2.718281828 mur = 4.48168907
+ muf = 12.18249396 mur = 2.718281828
+ muf = 2.718281828 mur = 12.18249396
+END_SCALES
+
+!####### SYNTAX ######################
+!##
+!## REWEIGHT {observable-name}**{val_power}
+!##
+!#####################################
+
+! REWEIGHT ht_part**4
+! REWEIGHT ht_part**1.4 !# DB
+REWEIGHT ht_part**6.5 !# KR
+
+CHANNELS
+ V
+END_CHANNELS
+
+SETUP
+END_SETUP
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2017_I1487277/fnl3332.1jet.RRa-warm.run
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2017_I1487277/fnl3332.1jet.RRa-warm.run (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2017_I1487277/fnl3332.1jet.RRa-warm.run (revision 1772)
@@ -0,0 +1,187 @@
+NNLOJET_RUNCARD
+RRa-8TeV ! Job name id, must be less than 10 characters
+1jet ! Process name
+500000 ! Number of events
+10 ! Number of iterations
+4 ! Seed number
+.true. ! Warmup
+.false. ! Production
+CT14nnlo ! PDF set
+0 ! PDF member
+antikt ! Jet algorithm, accepts 'kt', 'cam' or 'antikt'
+0.7d0 ! Rcut
+.false. ! exclusive
+0 ! Heavy particle decay type
+.1e-7 ! Technical cutoff y0
+.false. ! angular averaging of the phase space, default to true
+2 ! Virtual Integration method, use 2 if you're not sure
+a ! RR a/b region flag. Accepts 'a','b' or 'all'.
+0 ! set to zero for MC, 2 for point test
+.false. ! print max weight flag
+.true. ! momentum mapping and PDF storage flag
+.true. ! colour sampling flag
+.false. ! explicit pole check flag, stops integration when set to true
+
+PHYSICAL_PARAMETERS
+8000d0 ! roots
+125d0 ! Mass of the Higgs Boson
+0.004029643852d0 ! Width of the Higgs Boson
+91.1876d0 ! Mass of the Z Boson
+2.4952d0 ! Width of the Z Boson
+80.398d0 ! Mass of the W Boson
+2.1054d0 ! Width of the W Boson
+173.2d0 ! Mass of the Top Quark
+1.41d0 ! Width of the Top Quark
+4.18d0 ! Mass of the Bottom Quark
+0d0 ! Width of the Bottom Quark
+1.275d0 ! Mass of the Charm Quark
+0d0 ! Width of the Charm Quark
+
+! UNIT_PHASE
+
+SELECTORS
+ select jets_pt min = 21 max = 2500
+ select jets_abs_y max = 3.0
+ select njets min = 1
+END_SELECTORS
+
+
+
+HISTOGRAMS
+
+COMPOSITE > xptj0_y1 [21,24,28,32,37,43,49,56,64,74,84,97,114,133,153,174,196,220,245,272,300,330,362,395,430,468,507,548,592,638,686,737,790,846,905,967,1032,1101,1172,1248,1327,1410,1497,1588,1784,2116,2500]
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y2 [21,24,28,32,37,43,49,56,64,74,84,97,114,133,153,174,196,220,245,272,300,330,362,395,430,468,507,548,592,638,686,737,790,846,905,967,1032,1101,1172,1248,1327,1410,1497,1588,1784,2116,2500]
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y3 [21,24,28,32,37,43,49,56,64,74,84,97,114,133,153,174,196,220,245,272,300,330,362,395,430,468,507,548,592,638,686,737,790,846,905,967,1032,1101,1172,1248,1327,1410,1497,1588,1784,2116]
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y4 [21,24,28,32,37,43,49,56,64,74,84,97,114,133,153,174,196,220,245,272,300,330,362,395,430,468,507,548,592,638,686,737,790,846,905,967,1032,1101,1172,1248,1327,1410]
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y5 [21,24,28,32,37,43,49,56,64,74,84,97,114,133,153,174,196,220,245,272,300,330,362,395,430,468,507,548,592,638,686,737,790,846,905]
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y6 [21,24,28,32,37,43,49,56,64,74,84,97,114,133,153,174,196,220,245,272,300,330,362,395,430,468,507,548]
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=2.5 max=3.0
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=2.5 max=3.0
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=2.5 max=3.0
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=2.5 max=3.0
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+END_HISTOGRAMS
+
+SCALES
+ muf = ptj1 mur = ptj1
+END_SCALES
+
+!####### SYNTAX ######################
+!##
+!## REWEIGHT {observable-name}**{val_power}
+!##
+!#####################################
+
+! REWEIGHT ht_part**4
+! REWEIGHT ht_part**1.4 !# DB
+REWEIGHT ht_part**6.5 !# KR
+
+CHANNELS
+ RR
+END_CHANNELS
+
+SETUP
+END_SETUP
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2017_I1487277/fnl3332.1jet.LO-fastprod.run
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2017_I1487277/fnl3332.1jet.LO-fastprod.run (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2017_I1487277/fnl3332.1jet.LO-fastprod.run (revision 1772)
@@ -0,0 +1,193 @@
+NNLOJET_RUNCARD
+LO-8TeV ! Job name id, must be less than 10 characters
+1jet ! Process name
+@EVENTS@ ! Number of events
+1 ! Number of iterations
+@SEED@ ! Seed number
+.false. ! Warmup
+.true. ! Production
+CT14nnlo ! PDF set
+0 ! PDF member
+antikt ! Jet algorithm, accepts 'kt', 'cam' or 'antikt'
+0.7d0 ! Rcut
+.false. ! exclusive
+0 ! Heavy particle decay type
+.1e-7 ! Technical cutoff y0
+.false. ! angular averaging of the phase space, default to true
+2 ! Virtual Integration method, use 2 if you're not sure
+all ! RR a/b region flag. Accepts 'a','b' or 'all'.
+0 ! set to zero for MC, 2 for point test
+.false. ! print max weight flag
+.true. ! momentum mapping and PDF storage flag
+.true. ! colour sampling flag
+.false. ! explicit pole check flag, stops integration when set to true
+
+PHYSICAL_PARAMETERS
+8000d0 ! roots
+125d0 ! Mass of the Higgs Boson
+0.004029643852d0 ! Width of the Higgs Boson
+91.1876d0 ! Mass of the Z Boson
+2.4952d0 ! Width of the Z Boson
+80.398d0 ! Mass of the W Boson
+2.1054d0 ! Width of the W Boson
+173.2d0 ! Mass of the Top Quark
+1.41d0 ! Width of the Top Quark
+4.18d0 ! Mass of the Bottom Quark
+0d0 ! Width of the Bottom Quark
+1.275d0 ! Mass of the Charm Quark
+0d0 ! Width of the Charm Quark
+
+! UNIT_PHASE
+
+SELECTORS
+ select jets_pt min = 21 max = 2500
+ select jets_abs_y max = 3.0
+ select njets min = 1
+END_SELECTORS
+
+
+
+HISTOGRAMS
+
+COMPOSITE > xptj0_y1 [21,24,28,32,37,43,49,56,64,74,84,97,114,133,153,174,196,220,245,272,300,330,362,395,430,468,507,548,592,638,686,737,790,846,905,967,1032,1101,1172,1248,1327,1410,1497,1588,1784,2116,2500] grid=ptji_incl_y1.fast
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y2 [21,24,28,32,37,43,49,56,64,74,84,97,114,133,153,174,196,220,245,272,300,330,362,395,430,468,507,548,592,638,686,737,790,846,905,967,1032,1101,1172,1248,1327,1410,1497,1588,1784,2116,2500] grid=ptji_incl_y2.fast
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y3 [21,24,28,32,37,43,49,56,64,74,84,97,114,133,153,174,196,220,245,272,300,330,362,395,430,468,507,548,592,638,686,737,790,846,905,967,1032,1101,1172,1248,1327,1410,1497,1588,1784,2116] grid=ptji_incl_y3.fast
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y4 [21,24,28,32,37,43,49,56,64,74,84,97,114,133,153,174,196,220,245,272,300,330,362,395,430,468,507,548,592,638,686,737,790,846,905,967,1032,1101,1172,1248,1327,1410] grid=ptji_incl_y4.fast
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y5 [21,24,28,32,37,43,49,56,64,74,84,97,114,133,153,174,196,220,245,272,300,330,362,395,430,468,507,548,592,638,686,737,790,846,905] grid=ptji_incl_y5.fast
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y6 [21,24,28,32,37,43,49,56,64,74,84,97,114,133,153,174,196,220,245,272,300,330,362,395,430,468,507,548] grid=ptji_incl_y6.fast
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=2.5 max=3.0
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=2.5 max=3.0
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=2.5 max=3.0
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=2.5 max=3.0
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+END_HISTOGRAMS
+
+SCALES
+ muf = ptj1 mur = ptj1
+ muf = 2.718281828 mur = 2.718281828
+ muf = 4.48168907 mur = 4.48168907
+ muf = 4.48168907 mur = 2.718281828
+ muf = 2.718281828 mur = 4.48168907
+ muf = 12.18249396 mur = 2.718281828
+ muf = 2.718281828 mur = 12.18249396
+END_SCALES
+
+!####### SYNTAX ######################
+!##
+!## REWEIGHT {observable-name}**{val_power}
+!##
+!#####################################
+
+! REWEIGHT ht_part**4
+! REWEIGHT ht_part**1.4 !# DB
+REWEIGHT ht_part**6.5 !# KR
+
+CHANNELS
+ LO
+END_CHANNELS
+
+SETUP
+END_SETUP
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2017_I1487277/fnl3332.1jet.LO-fastwarm.run
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2017_I1487277/fnl3332.1jet.LO-fastwarm.run (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2017_I1487277/fnl3332.1jet.LO-fastwarm.run (revision 1772)
@@ -0,0 +1,193 @@
+NNLOJET_RUNCARD
+LO-8TeV ! Job name id, must be less than 10 characters
+1jet ! Process name
+@EVENTS@ ! Number of events
+1 ! Number of iterations
+@SEED@ ! Seed number
+.false. ! Warmup
+.true. ! Production
+CT14nnlo ! PDF set
+0 ! PDF member
+antikt ! Jet algorithm, accepts 'kt', 'cam' or 'antikt'
+0.7d0 ! Rcut
+.false. ! exclusive
+0 ! Heavy particle decay type
+.1e-7 ! Technical cutoff y0
+.false. ! angular averaging of the phase space, default to true
+2 ! Virtual Integration method, use 2 if you're not sure
+all ! RR a/b region flag. Accepts 'a','b' or 'all'.
+0 ! set to zero for MC, 2 for point test
+.false. ! print max weight flag
+.true. ! momentum mapping and PDF storage flag
+.true. ! colour sampling flag
+.false. ! explicit pole check flag, stops integration when set to true
+
+PHYSICAL_PARAMETERS
+8000d0 ! roots
+125d0 ! Mass of the Higgs Boson
+0.004029643852d0 ! Width of the Higgs Boson
+91.1876d0 ! Mass of the Z Boson
+2.4952d0 ! Width of the Z Boson
+80.398d0 ! Mass of the W Boson
+2.1054d0 ! Width of the W Boson
+173.2d0 ! Mass of the Top Quark
+1.41d0 ! Width of the Top Quark
+4.18d0 ! Mass of the Bottom Quark
+0d0 ! Width of the Bottom Quark
+1.275d0 ! Mass of the Charm Quark
+0d0 ! Width of the Charm Quark
+
+UNIT_PHASE
+
+SELECTORS
+ select jets_pt min = 21 max = 2500
+ select jets_abs_y max = 3.0
+ select njets min = 1
+END_SELECTORS
+
+
+
+HISTOGRAMS
+
+COMPOSITE > xptj0_y1 [21,24,28,32,37,43,49,56,64,74,84,97,114,133,153,174,196,220,245,272,300,330,362,395,430,468,507,548,592,638,686,737,790,846,905,967,1032,1101,1172,1248,1327,1410,1497,1588,1784,2116,2500] grid=ptji_incl_y1.fast
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y2 [21,24,28,32,37,43,49,56,64,74,84,97,114,133,153,174,196,220,245,272,300,330,362,395,430,468,507,548,592,638,686,737,790,846,905,967,1032,1101,1172,1248,1327,1410,1497,1588,1784,2116,2500] grid=ptji_incl_y2.fast
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y3 [21,24,28,32,37,43,49,56,64,74,84,97,114,133,153,174,196,220,245,272,300,330,362,395,430,468,507,548,592,638,686,737,790,846,905,967,1032,1101,1172,1248,1327,1410,1497,1588,1784,2116] grid=ptji_incl_y3.fast
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y4 [21,24,28,32,37,43,49,56,64,74,84,97,114,133,153,174,196,220,245,272,300,330,362,395,430,468,507,548,592,638,686,737,790,846,905,967,1032,1101,1172,1248,1327,1410] grid=ptji_incl_y4.fast
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y5 [21,24,28,32,37,43,49,56,64,74,84,97,114,133,153,174,196,220,245,272,300,330,362,395,430,468,507,548,592,638,686,737,790,846,905] grid=ptji_incl_y5.fast
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y6 [21,24,28,32,37,43,49,56,64,74,84,97,114,133,153,174,196,220,245,272,300,330,362,395,430,468,507,548] grid=ptji_incl_y6.fast
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=2.5 max=3.0
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=2.5 max=3.0
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=2.5 max=3.0
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=2.5 max=3.0
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+END_HISTOGRAMS
+
+SCALES
+ muf = ptj1 mur = ptj1
+ muf = 2.718281828 mur = 2.718281828
+ muf = 4.48168907 mur = 4.48168907
+ muf = 4.48168907 mur = 2.718281828
+ muf = 2.718281828 mur = 4.48168907
+ muf = 12.18249396 mur = 2.718281828
+ muf = 2.718281828 mur = 12.18249396
+END_SCALES
+
+!####### SYNTAX ######################
+!##
+!## REWEIGHT {observable-name}**{val_power}
+!##
+!#####################################
+
+! REWEIGHT ht_part**4
+! REWEIGHT ht_part**1.4 !# DB
+REWEIGHT ht_part**6.5 !# KR
+
+CHANNELS
+ LO
+END_CHANNELS
+
+SETUP
+END_SETUP
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2017_I1487277/fnl3332.1jet.RRa-fastprod.run
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2017_I1487277/fnl3332.1jet.RRa-fastprod.run (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2017_I1487277/fnl3332.1jet.RRa-fastprod.run (revision 1772)
@@ -0,0 +1,193 @@
+NNLOJET_RUNCARD
+RRa-8TeV ! Job name id, must be less than 10 characters
+1jet ! Process name
+@EVENTS@ ! Number of events
+1 ! Number of iterations
+@SEED@ ! Seed number
+.false. ! Warmup
+.true. ! Production
+CT14nnlo ! PDF set
+0 ! PDF member
+antikt ! Jet algorithm, accepts 'kt', 'cam' or 'antikt'
+0.7d0 ! Rcut
+.false. ! exclusive
+0 ! Heavy particle decay type
+.1e-7 ! Technical cutoff y0
+.false. ! angular averaging of the phase space, default to true
+2 ! Virtual Integration method, use 2 if you're not sure
+a ! RR a/b region flag. Accepts 'a','b' or 'all'.
+0 ! set to zero for MC, 2 for point test
+.false. ! print max weight flag
+.true. ! momentum mapping and PDF storage flag
+.true. ! colour sampling flag
+.false. ! explicit pole check flag, stops integration when set to true
+
+PHYSICAL_PARAMETERS
+8000d0 ! roots
+125d0 ! Mass of the Higgs Boson
+0.004029643852d0 ! Width of the Higgs Boson
+91.1876d0 ! Mass of the Z Boson
+2.4952d0 ! Width of the Z Boson
+80.398d0 ! Mass of the W Boson
+2.1054d0 ! Width of the W Boson
+173.2d0 ! Mass of the Top Quark
+1.41d0 ! Width of the Top Quark
+4.18d0 ! Mass of the Bottom Quark
+0d0 ! Width of the Bottom Quark
+1.275d0 ! Mass of the Charm Quark
+0d0 ! Width of the Charm Quark
+
+! UNIT_PHASE
+
+SELECTORS
+ select jets_pt min = 21 max = 2500
+ select jets_abs_y max = 3.0
+ select njets min = 1
+END_SELECTORS
+
+
+
+HISTOGRAMS
+
+COMPOSITE > xptj0_y1 [21,24,28,32,37,43,49,56,64,74,84,97,114,133,153,174,196,220,245,272,300,330,362,395,430,468,507,548,592,638,686,737,790,846,905,967,1032,1101,1172,1248,1327,1410,1497,1588,1784,2116,2500] grid=ptji_incl_y1.fast
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y2 [21,24,28,32,37,43,49,56,64,74,84,97,114,133,153,174,196,220,245,272,300,330,362,395,430,468,507,548,592,638,686,737,790,846,905,967,1032,1101,1172,1248,1327,1410,1497,1588,1784,2116,2500] grid=ptji_incl_y2.fast
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y3 [21,24,28,32,37,43,49,56,64,74,84,97,114,133,153,174,196,220,245,272,300,330,362,395,430,468,507,548,592,638,686,737,790,846,905,967,1032,1101,1172,1248,1327,1410,1497,1588,1784,2116] grid=ptji_incl_y3.fast
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y4 [21,24,28,32,37,43,49,56,64,74,84,97,114,133,153,174,196,220,245,272,300,330,362,395,430,468,507,548,592,638,686,737,790,846,905,967,1032,1101,1172,1248,1327,1410] grid=ptji_incl_y4.fast
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y5 [21,24,28,32,37,43,49,56,64,74,84,97,114,133,153,174,196,220,245,272,300,330,362,395,430,468,507,548,592,638,686,737,790,846,905] grid=ptji_incl_y5.fast
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y6 [21,24,28,32,37,43,49,56,64,74,84,97,114,133,153,174,196,220,245,272,300,330,362,395,430,468,507,548] grid=ptji_incl_y6.fast
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=2.5 max=3.0
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=2.5 max=3.0
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=2.5 max=3.0
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=2.5 max=3.0
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+END_HISTOGRAMS
+
+SCALES
+ muf = ptj1 mur = ptj1
+ muf = 2.718281828 mur = 2.718281828
+ muf = 4.48168907 mur = 4.48168907
+ muf = 4.48168907 mur = 2.718281828
+ muf = 2.718281828 mur = 4.48168907
+ muf = 12.18249396 mur = 2.718281828
+ muf = 2.718281828 mur = 12.18249396
+END_SCALES
+
+!####### SYNTAX ######################
+!##
+!## REWEIGHT {observable-name}**{val_power}
+!##
+!#####################################
+
+! REWEIGHT ht_part**4
+! REWEIGHT ht_part**1.4 !# DB
+REWEIGHT ht_part**6.5 !# KR
+
+CHANNELS
+ RR
+END_CHANNELS
+
+SETUP
+END_SETUP
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2013_I1208923/fnl2332d.1jet.R-fastprod.conf
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2013_I1208923/fnl2332d.1jet.R-fastprod.conf (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2013_I1208923/fnl2332d.1jet.R-fastprod.conf (revision 1772)
@@ -0,0 +1,21 @@
+[global]
+include = nnlojet-gc.conf
+
+[jobs]
+;jobs = 5 ; Max. # of jobs (truncated to module maximum), D=mod
+;wall time = 2:00 ; Requested wall time in hh[:mm[:ss]] (also used for proxy lifetime)
+
+[parameters] ; This section defines the parameter space
+repeat = 1 ; How many times each parameter space point should be sampled
+parameters = ( SEED , EVENTS )
+SEED = range( 200, 400 )
+SEED type = expr
+EVENTS = 10000000
+
+[UserTask]
+executable = fnlo-run-nnlojet.csh
+arguments = fnl2332d 1jet R fastprod
+subst files = fnl2332d.1jet.R-fastprod.run
+; NNLOJET production run
+input files = fnlo-run-nnlojet.pl fastNLO_v23_source_nnlojet_cvmfs.csh fnl2332d.1jet.R-fastprod.run 1jet.R-7TeV.y.1e-7.vRa jet.R-7TeV.ptji_incl_y1.wrm jet.R-7TeV.ptji_incl_y2.wrm jet.R-7TeV.ptji_incl_y3.wrm jet.R-7TeV.ptji_incl_y4.wrm jet.R-7TeV.ptji_incl_y5.wrm jet.7TeV.ptji_incl_y1.wrm jet.7TeV.ptji_incl_y2.wrm jet.7TeV.ptji_incl_y3.wrm jet.7TeV.ptji_incl_y4.wrm jet.7TeV.ptji_incl_y5.wrm
+output files = fnl2332d.1jet.R-fastprod.tar.gz
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2013_I1208923/fnl2332d.1jet.RRa-fastprod.run
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2013_I1208923/fnl2332d.1jet.RRa-fastprod.run (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2013_I1208923/fnl2332d.1jet.RRa-fastprod.run (revision 1772)
@@ -0,0 +1,174 @@
+NNLOJET_RUNCARD
+RRa-7TeV ! Job name id, must be less than 10 characters
+1jet ! Process name
+@EVENTS@ ! Number of events
+1 ! Number of iterations
+@SEED@ ! Seed number
+.false. ! Warmup
+.true. ! Production
+CT14nnlo ! PDF set
+0 ! PDF member
+antikt ! Jet algorithm, accepts 'kt', 'cam' or 'antikt'
+0.7d0 ! Rcut
+.false. ! exclusive
+0 ! Heavy particle decay type
+.1e-7 ! Technical cutoff y0
+.false. ! angular averaging of the phase space, default to true
+2 ! Virtual Integration method, use 2 if you're not sure
+a ! RR a/b region flag. Accepts 'a','b' or 'all'.
+0 ! set to zero for MC, 2 for point test
+.false. ! print max weight flag
+.true. ! momentum mapping and PDF storage flag
+.true. ! colour sampling flag
+.false. ! explicit pole check flag, stops integration when set to true
+
+PHYSICAL_PARAMETERS
+7000d0 ! roots
+125d0 ! Mass of the Higgs Boson
+0.004029643852d0 ! Width of the Higgs Boson
+91.1876d0 ! Mass of the Z Boson
+2.4952d0 ! Width of the Z Boson
+80.398d0 ! Mass of the W Boson
+2.1054d0 ! Width of the W Boson
+173.2d0 ! Mass of the Top Quark
+1.41d0 ! Width of the Top Quark
+4.18d0 ! Mass of the Bottom Quark
+0d0 ! Width of the Bottom Quark
+1.275d0 ! Mass of the Charm Quark
+0d0 ! Width of the Charm Quark
+
+! UNIT_PHASE
+
+SELECTORS
+ select jets_pt min = 114 max = 2116
+ select jets_abs_y max = 2.5
+ select njets min = 1
+END_SELECTORS
+
+
+
+HISTOGRAMS
+
+COMPOSITE > xptj0_y1 [114.0,133.0,153.0,174.0,196.0,220.0,245.0,272.0,300.0,330.0,362.0,395.0,430.0,468.0,507.0,548.0,592.0,638.0,686.0,737.0,790.0,846.0,905.0,967.0,1032.0,1101.0,1172.0,1248.0,1327.0,1410.0,1497.0,1588.0,1784.0,2116.0] grid=ptji_incl_y1.fast
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y2 [114.0,133.0,153.0,174.0,196.0,220.0,245.0,272.0,300.0,330.0,362.0,395.0,430.0,468.0,507.0,548.0,592.0,638.0,686.0,737.0,790.0,846.0,905.0,967.0,1032.0,1101.0,1172.0,1248.0,1327.0,1410.0,1784.0] grid=ptji_incl_y2.fast
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y3 [114.0,133.0,153.0,174.0,196.0,220.0,245.0,272.0,300.0,330.0,362.0,395.0,430.0,468.0,507.0,548.0,592.0,638.0,686.0,737.0,790.0,846.0,905.0,967.0,1032.0,1101.0,1172.0,1684.0] grid=ptji_incl_y3.fast
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y4 [114.0,133.0,153.0,174.0,196.0,220.0,245.0,272.0,300.0,330.0,362.0,395.0,430.0,468.0,507.0,548.0,592.0,638.0,686.0,737.0,790.0,846.0,905.0,967.0,1248.0] grid=ptji_incl_y4.fast
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y5 [114.0,133.0,153.0,174.0,196.0,220.0,245.0,272.0,300.0,330.0,362.0,395.0,430.0,468.0,507.0,548.0,592.0,638.0,686.0,905.0] grid=ptji_incl_y5.fast
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+END_HISTOGRAMS
+
+SCALES
+ muf = ptj1 mur = ptj1
+ muf = 2.718281828 mur = 2.718281828
+ muf = 4.48168907 mur = 4.48168907
+ muf = 4.48168907 mur = 2.718281828
+ muf = 2.718281828 mur = 4.48168907
+ muf = 12.18249396 mur = 2.718281828
+ muf = 2.718281828 mur = 12.18249396
+END_SCALES
+
+!####### SYNTAX ######################
+!##
+!## REWEIGHT {observable-name}**{val_power}
+!##
+!#####################################
+
+! REWEIGHT ht_part**4
+! REWEIGHT ht_part**1.4 !# DB
+REWEIGHT ht_part**6.5 !# KR
+
+CHANNELS
+ RR
+END_CHANNELS
+
+SETUP
+END_SETUP
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2013_I1208923/fnl2332d.1jet.R-fastwarm.conf
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2013_I1208923/fnl2332d.1jet.R-fastwarm.conf (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2013_I1208923/fnl2332d.1jet.R-fastwarm.conf (revision 1772)
@@ -0,0 +1,21 @@
+[global]
+include = nnlojet-gc.conf
+
+[jobs]
+;jobs = 5 ; Max. # of jobs (truncated to module maximum), D=mod
+;wall time = 0:20 ; Requested wall time in hh[:mm[:ss]] (also used for proxy lifetime)
+
+[parameters] ; This section defines the parameter space
+repeat = 1 ; How many times each parameter space point should be sampled
+parameters = ( SEED , EVENTS )
+SEED = range( 200, 240 )
+SEED type = expr
+EVENTS = 4000000
+
+[UserTask]
+executable = fnlo-run-nnlojet.csh
+arguments = fnl2332d 1jet R fastwarm
+subst files = fnl2332d.1jet.R-fastwarm.run
+; NNLOJET Warm-up run
+input files = fnlo-run-nnlojet.pl fastNLO_v23_source_nnlojet_cvmfs.csh fnl2332d.1jet.R-fastwarm.run 1jet.R-7TeV.y.1e-7.vRa
+output files = fnl2332d.1jet.R-fastwarm.tar.gz
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2013_I1208923/fnl2332d.1jet.V-fastprod.conf
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2013_I1208923/fnl2332d.1jet.V-fastprod.conf (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2013_I1208923/fnl2332d.1jet.V-fastprod.conf (revision 1772)
@@ -0,0 +1,21 @@
+[global]
+include = nnlojet-gc.conf
+
+[jobs]
+;jobs = 5 ; Max. # of jobs (truncated to module maximum), D=mod
+;wall time = 2:00 ; Requested wall time in hh[:mm[:ss]] (also used for proxy lifetime)
+
+[parameters] ; This section defines the parameter space
+repeat = 1 ; How many times each parameter space point should be sampled
+parameters = ( SEED , EVENTS )
+SEED = range( 300, 350 )
+SEED type = expr
+EVENTS = 40000000
+
+[UserTask]
+executable = fnlo-run-nnlojet.csh
+arguments = fnl2332d 1jet V fastprod
+subst files = fnl2332d.1jet.V-fastprod.run
+; NNLOJET production run
+input files = fnlo-run-nnlojet.pl fastNLO_v23_source_nnlojet_cvmfs.csh fnl2332d.1jet.V-fastprod.run 1jet.V-7TeV.y.1e-7.vBa jet.V-7TeV.ptji_incl_y1.wrm jet.V-7TeV.ptji_incl_y2.wrm jet.V-7TeV.ptji_incl_y3.wrm jet.V-7TeV.ptji_incl_y4.wrm jet.V-7TeV.ptji_incl_y5.wrm jet.7TeV.ptji_incl_y1.wrm jet.7TeV.ptji_incl_y2.wrm jet.7TeV.ptji_incl_y3.wrm jet.7TeV.ptji_incl_y4.wrm jet.7TeV.ptji_incl_y5.wrm
+output files = fnl2332d.1jet.V-fastprod.tar.gz
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2013_I1208923/fnl2332d.1jet.RV-fastprod.run
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2013_I1208923/fnl2332d.1jet.RV-fastprod.run (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2013_I1208923/fnl2332d.1jet.RV-fastprod.run (revision 1772)
@@ -0,0 +1,174 @@
+NNLOJET_RUNCARD
+RV-7TeV ! Job name id, must be less than 10 characters
+1jet ! Process name
+@EVENTS@ ! Number of events
+1 ! Number of iterations
+@SEED@ ! Seed number
+.false. ! Warmup
+.true. ! Production
+CT14nnlo ! PDF set
+0 ! PDF member
+antikt ! Jet algorithm, accepts 'kt', 'cam' or 'antikt'
+0.7d0 ! Rcut
+.false. ! exclusive
+0 ! Heavy particle decay type
+.1e-7 ! Technical cutoff y0
+.false. ! angular averaging of the phase space, default to true
+2 ! Virtual Integration method, use 2 if you're not sure
+all ! RR a/b region flag. Accepts 'a','b' or 'all'.
+0 ! set to zero for MC, 2 for point test
+.false. ! print max weight flag
+.true. ! momentum mapping and PDF storage flag
+.true. ! colour sampling flag
+.false. ! explicit pole check flag, stops integration when set to true
+
+PHYSICAL_PARAMETERS
+7000d0 ! roots
+125d0 ! Mass of the Higgs Boson
+0.004029643852d0 ! Width of the Higgs Boson
+91.1876d0 ! Mass of the Z Boson
+2.4952d0 ! Width of the Z Boson
+80.398d0 ! Mass of the W Boson
+2.1054d0 ! Width of the W Boson
+173.2d0 ! Mass of the Top Quark
+1.41d0 ! Width of the Top Quark
+4.18d0 ! Mass of the Bottom Quark
+0d0 ! Width of the Bottom Quark
+1.275d0 ! Mass of the Charm Quark
+0d0 ! Width of the Charm Quark
+
+! UNIT_PHASE
+
+SELECTORS
+ select jets_pt min = 114 max = 2116
+ select jets_abs_y max = 2.5
+ select njets min = 1
+END_SELECTORS
+
+
+
+HISTOGRAMS
+
+COMPOSITE > xptj0_y1 [114.0,133.0,153.0,174.0,196.0,220.0,245.0,272.0,300.0,330.0,362.0,395.0,430.0,468.0,507.0,548.0,592.0,638.0,686.0,737.0,790.0,846.0,905.0,967.0,1032.0,1101.0,1172.0,1248.0,1327.0,1410.0,1497.0,1588.0,1784.0,2116.0] grid=ptji_incl_y1.fast
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y2 [114.0,133.0,153.0,174.0,196.0,220.0,245.0,272.0,300.0,330.0,362.0,395.0,430.0,468.0,507.0,548.0,592.0,638.0,686.0,737.0,790.0,846.0,905.0,967.0,1032.0,1101.0,1172.0,1248.0,1327.0,1410.0,1784.0] grid=ptji_incl_y2.fast
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y3 [114.0,133.0,153.0,174.0,196.0,220.0,245.0,272.0,300.0,330.0,362.0,395.0,430.0,468.0,507.0,548.0,592.0,638.0,686.0,737.0,790.0,846.0,905.0,967.0,1032.0,1101.0,1172.0,1684.0] grid=ptji_incl_y3.fast
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y4 [114.0,133.0,153.0,174.0,196.0,220.0,245.0,272.0,300.0,330.0,362.0,395.0,430.0,468.0,507.0,548.0,592.0,638.0,686.0,737.0,790.0,846.0,905.0,967.0,1248.0] grid=ptji_incl_y4.fast
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y5 [114.0,133.0,153.0,174.0,196.0,220.0,245.0,272.0,300.0,330.0,362.0,395.0,430.0,468.0,507.0,548.0,592.0,638.0,686.0,905.0] grid=ptji_incl_y5.fast
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+END_HISTOGRAMS
+
+SCALES
+ muf = ptj1 mur = ptj1
+ muf = 2.718281828 mur = 2.718281828
+ muf = 4.48168907 mur = 4.48168907
+ muf = 4.48168907 mur = 2.718281828
+ muf = 2.718281828 mur = 4.48168907
+ muf = 12.18249396 mur = 2.718281828
+ muf = 2.718281828 mur = 12.18249396
+END_SCALES
+
+!####### SYNTAX ######################
+!##
+!## REWEIGHT {observable-name}**{val_power}
+!##
+!#####################################
+
+! REWEIGHT ht_part**4
+! REWEIGHT ht_part**1.4 !# DB
+REWEIGHT ht_part**6.5 !# KR
+
+CHANNELS
+ RV
+END_CHANNELS
+
+SETUP
+END_SETUP
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2013_I1208923/fnl2332d.1jet.V-fastwarm.conf
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2013_I1208923/fnl2332d.1jet.V-fastwarm.conf (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2013_I1208923/fnl2332d.1jet.V-fastwarm.conf (revision 1772)
@@ -0,0 +1,21 @@
+[global]
+include = nnlojet-gc.conf
+
+[jobs]
+;jobs = 5 ; Max. # of jobs (truncated to module maximum), D=mod
+;wall time = 0:20 ; Requested wall time in hh[:mm[:ss]] (also used for proxy lifetime)
+
+[parameters] ; This section defines the parameter space
+repeat = 1 ; How many times each parameter space point should be sampled
+parameters = ( SEED , EVENTS )
+SEED = range( 300, 340 )
+SEED type = expr
+EVENTS = 4000000
+
+[UserTask]
+executable = fnlo-run-nnlojet.csh
+arguments = fnl2332d 1jet V fastwarm
+subst files = fnl2332d.1jet.V-fastwarm.run
+; NNLOJET Warm-up run
+input files = fnlo-run-nnlojet.pl fastNLO_v23_source_nnlojet_cvmfs.csh fnl2332d.1jet.V-fastwarm.run 1jet.V-7TeV.y.1e-7.vBa
+output files = fnl2332d.1jet.V-fastwarm.tar.gz
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2013_I1208923/fnl2332d.1jet.VV-fastprod.run
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2013_I1208923/fnl2332d.1jet.VV-fastprod.run (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2013_I1208923/fnl2332d.1jet.VV-fastprod.run (revision 1772)
@@ -0,0 +1,174 @@
+NNLOJET_RUNCARD
+VV-7TeV ! Job name id, must be less than 10 characters
+1jet ! Process name
+@EVENTS@ ! Number of events
+1 ! Number of iterations
+@SEED@ ! Seed number
+.false. ! Warmup
+.true. ! Production
+CT14nnlo ! PDF set
+0 ! PDF member
+antikt ! Jet algorithm, accepts 'kt', 'cam' or 'antikt'
+0.7d0 ! Rcut
+.false. ! exclusive
+0 ! Heavy particle decay type
+.1e-7 ! Technical cutoff y0
+.false. ! angular averaging of the phase space, default to true
+2 ! Virtual Integration method, use 2 if you're not sure
+all ! RR a/b region flag. Accepts 'a','b' or 'all'.
+0 ! set to zero for MC, 2 for point test
+.false. ! print max weight flag
+.true. ! momentum mapping and PDF storage flag
+.true. ! colour sampling flag
+.false. ! explicit pole check flag, stops integration when set to true
+
+PHYSICAL_PARAMETERS
+7000d0 ! roots
+125d0 ! Mass of the Higgs Boson
+0.004029643852d0 ! Width of the Higgs Boson
+91.1876d0 ! Mass of the Z Boson
+2.4952d0 ! Width of the Z Boson
+80.398d0 ! Mass of the W Boson
+2.1054d0 ! Width of the W Boson
+173.2d0 ! Mass of the Top Quark
+1.41d0 ! Width of the Top Quark
+4.18d0 ! Mass of the Bottom Quark
+0d0 ! Width of the Bottom Quark
+1.275d0 ! Mass of the Charm Quark
+0d0 ! Width of the Charm Quark
+
+! UNIT_PHASE
+
+SELECTORS
+ select jets_pt min = 114 max = 2116
+ select jets_abs_y max = 2.5
+ select njets min = 1
+END_SELECTORS
+
+
+
+HISTOGRAMS
+
+COMPOSITE > xptj0_y1 [114.0,133.0,153.0,174.0,196.0,220.0,245.0,272.0,300.0,330.0,362.0,395.0,430.0,468.0,507.0,548.0,592.0,638.0,686.0,737.0,790.0,846.0,905.0,967.0,1032.0,1101.0,1172.0,1248.0,1327.0,1410.0,1497.0,1588.0,1784.0,2116.0] grid=ptji_incl_y1.fast
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y2 [114.0,133.0,153.0,174.0,196.0,220.0,245.0,272.0,300.0,330.0,362.0,395.0,430.0,468.0,507.0,548.0,592.0,638.0,686.0,737.0,790.0,846.0,905.0,967.0,1032.0,1101.0,1172.0,1248.0,1327.0,1410.0,1784.0] grid=ptji_incl_y2.fast
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y3 [114.0,133.0,153.0,174.0,196.0,220.0,245.0,272.0,300.0,330.0,362.0,395.0,430.0,468.0,507.0,548.0,592.0,638.0,686.0,737.0,790.0,846.0,905.0,967.0,1032.0,1101.0,1172.0,1684.0] grid=ptji_incl_y3.fast
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y4 [114.0,133.0,153.0,174.0,196.0,220.0,245.0,272.0,300.0,330.0,362.0,395.0,430.0,468.0,507.0,548.0,592.0,638.0,686.0,737.0,790.0,846.0,905.0,967.0,1248.0] grid=ptji_incl_y4.fast
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y5 [114.0,133.0,153.0,174.0,196.0,220.0,245.0,272.0,300.0,330.0,362.0,395.0,430.0,468.0,507.0,548.0,592.0,638.0,686.0,905.0] grid=ptji_incl_y5.fast
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+END_HISTOGRAMS
+
+SCALES
+ muf = ptj1 mur = ptj1
+ muf = 2.718281828 mur = 2.718281828
+ muf = 4.48168907 mur = 4.48168907
+ muf = 4.48168907 mur = 2.718281828
+ muf = 2.718281828 mur = 4.48168907
+ muf = 12.18249396 mur = 2.718281828
+ muf = 2.718281828 mur = 12.18249396
+END_SCALES
+
+!####### SYNTAX ######################
+!##
+!## REWEIGHT {observable-name}**{val_power}
+!##
+!#####################################
+
+! REWEIGHT ht_part**4
+! REWEIGHT ht_part**1.4 !# DB
+REWEIGHT ht_part**6.5 !# KR
+
+CHANNELS
+ VV
+END_CHANNELS
+
+SETUP
+END_SETUP
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2013_I1208923/fnl2332d.1jet.LO-fastprod.conf
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2013_I1208923/fnl2332d.1jet.LO-fastprod.conf (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2013_I1208923/fnl2332d.1jet.LO-fastprod.conf (revision 1772)
@@ -0,0 +1,21 @@
+[global]
+include = nnlojet-gc.conf
+
+[jobs]
+;jobs = 5 ; Max. # of jobs (truncated to module maximum), D=mod
+;wall time = 2:00 ; Requested wall time in hh[:mm[:ss]] (also used for proxy lifetime)
+
+[parameters] ; This section defines the parameter space
+repeat = 1 ; How many times each parameter space point should be sampled
+parameters = ( SEED , EVENTS )
+SEED = range( 100, 110 )
+SEED type = expr
+EVENTS = 250000000
+
+[UserTask]
+executable = fnlo-run-nnlojet.csh
+arguments = fnl2332d 1jet LO fastprod
+subst files = fnl2332d.1jet.LO-fastprod.run
+; NNLOJET production run
+input files = fnlo-run-nnlojet.pl fastNLO_v23_source_nnlojet_cvmfs.csh fnl2332d.1jet.LO-fastprod.run 1jet.LO-7TeV.y.1e-7.vBa jet.LO-7TeV.ptji_incl_y1.wrm jet.LO-7TeV.ptji_incl_y2.wrm jet.LO-7TeV.ptji_incl_y3.wrm jet.LO-7TeV.ptji_incl_y4.wrm jet.LO-7TeV.ptji_incl_y5.wrm jet.7TeV.ptji_incl_y1.wrm jet.7TeV.ptji_incl_y2.wrm jet.7TeV.ptji_incl_y3.wrm jet.7TeV.ptji_incl_y4.wrm jet.7TeV.ptji_incl_y5.wrm
+output files = fnl2332d.1jet.LO-fastprod.tar.gz
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2013_I1208923/fnl2332d.1jet.LO-fastwarm.conf
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2013_I1208923/fnl2332d.1jet.LO-fastwarm.conf (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2013_I1208923/fnl2332d.1jet.LO-fastwarm.conf (revision 1772)
@@ -0,0 +1,21 @@
+[global]
+include = nnlojet-gc.conf
+
+[jobs]
+;jobs = 5 ; Max. # of jobs (truncated to module maximum), D=mod
+;wall time = 0:10 ; Requested wall time in hh[:mm[:ss]] (also used for proxy lifetime)
+
+[parameters] ; This section defines the parameter space
+repeat = 1 ; How many times each parameter space point should be sampled
+parameters = ( SEED , EVENTS )
+SEED = range( 100, 110 )
+SEED type = expr
+EVENTS = 15000000
+
+[UserTask]
+executable = fnlo-run-nnlojet.csh
+arguments = fnl2332d 1jet LO fastwarm
+subst files = fnl2332d.1jet.LO-fastwarm.run
+; NNLOJET Warm-up run
+input files = fnlo-run-nnlojet.pl fastNLO_v23_source_nnlojet_cvmfs.csh fnl2332d.1jet.LO-fastwarm.run 1jet.LO-7TeV.y.1e-7.vBa
+output files = fnl2332d.1jet.LO-fastwarm.tar.gz
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2013_I1208923/fnl2332d.1jet.LO-warm.run
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2013_I1208923/fnl2332d.1jet.LO-warm.run (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2013_I1208923/fnl2332d.1jet.LO-warm.run (revision 1772)
@@ -0,0 +1,168 @@
+NNLOJET_RUNCARD
+LO-7TeV ! Job name id, must be less than 10 characters
+1jet ! Process name
+100000000 ! Number of events
+10 ! Number of iterations
+1 ! Seed number
+.true. ! Warmup
+.false. ! Production
+CT14nnlo ! PDF set
+0 ! PDF member
+antikt ! Jet algorithm, accepts 'kt', 'cam' or 'antikt'
+0.7d0 ! Rcut
+.false. ! exclusive
+0 ! Heavy particle decay type
+.1e-7 ! Technical cutoff y0
+.false. ! angular averaging of the phase space, default to true
+2 ! Virtual Integration method, use 2 if you're not sure
+all ! RR a/b region flag. Accepts 'a','b' or 'all'.
+0 ! set to zero for MC, 2 for point test
+.false. ! print max weight flag
+.true. ! momentum mapping and PDF storage flag
+.true. ! colour sampling flag
+.false. ! explicit pole check flag, stops integration when set to true
+
+PHYSICAL_PARAMETERS
+7000d0 ! roots
+125d0 ! Mass of the Higgs Boson
+0.004029643852d0 ! Width of the Higgs Boson
+91.1876d0 ! Mass of the Z Boson
+2.4952d0 ! Width of the Z Boson
+80.398d0 ! Mass of the W Boson
+2.1054d0 ! Width of the W Boson
+173.2d0 ! Mass of the Top Quark
+1.41d0 ! Width of the Top Quark
+4.18d0 ! Mass of the Bottom Quark
+0d0 ! Width of the Bottom Quark
+1.275d0 ! Mass of the Charm Quark
+0d0 ! Width of the Charm Quark
+
+! UNIT_PHASE
+
+SELECTORS
+ select jets_pt min = 114 max = 2116
+ select jets_abs_y max = 2.5
+ select njets min = 1
+END_SELECTORS
+
+
+
+HISTOGRAMS
+
+COMPOSITE > xptj0_y1 [114.0,133.0,153.0,174.0,196.0,220.0,245.0,272.0,300.0,330.0,362.0,395.0,430.0,468.0,507.0,548.0,592.0,638.0,686.0,737.0,790.0,846.0,905.0,967.0,1032.0,1101.0,1172.0,1248.0,1327.0,1410.0,1497.0,1588.0,1784.0,2116.0]
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y2 [114.0,133.0,153.0,174.0,196.0,220.0,245.0,272.0,300.0,330.0,362.0,395.0,430.0,468.0,507.0,548.0,592.0,638.0,686.0,737.0,790.0,846.0,905.0,967.0,1032.0,1101.0,1172.0,1248.0,1327.0,1410.0,1784.0]
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y3 [114.0,133.0,153.0,174.0,196.0,220.0,245.0,272.0,300.0,330.0,362.0,395.0,430.0,468.0,507.0,548.0,592.0,638.0,686.0,737.0,790.0,846.0,905.0,967.0,1032.0,1101.0,1172.0,1684.0]
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y4 [114.0,133.0,153.0,174.0,196.0,220.0,245.0,272.0,300.0,330.0,362.0,395.0,430.0,468.0,507.0,548.0,592.0,638.0,686.0,737.0,790.0,846.0,905.0,967.0,1248.0]
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y5 [114.0,133.0,153.0,174.0,196.0,220.0,245.0,272.0,300.0,330.0,362.0,395.0,430.0,468.0,507.0,548.0,592.0,638.0,686.0,905.0]
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+END_HISTOGRAMS
+
+SCALES
+ muf = ptj1 mur = ptj1
+END_SCALES
+
+!####### SYNTAX ######################
+!##
+!## REWEIGHT {observable-name}**{val_power}
+!##
+!#####################################
+
+! REWEIGHT ht_part**4
+! REWEIGHT ht_part**1.4 !# DB
+REWEIGHT ht_part**6.5 !# KR
+
+CHANNELS
+ LO
+END_CHANNELS
+
+SETUP
+END_SETUP
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2013_I1208923/1jet.V-7TeV.y.1e-7.vBa
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2013_I1208923/1jet.V-7TeV.y.1e-7.vBa (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2013_I1208923/1jet.V-7TeV.y.1e-7.vBa (revision 1772)
@@ -0,0 +1,132 @@
+
+ 13FA4C6A32BF8B3573FB0B8D1BE8625D63FB504D5FFE27A543FB9275F69EDC336
+3FBCD73DE9AC6A193FC02833D5A5FC6E3FC1CF535452C1073FC3662762A17D193FC4F0DF48F5E390
+3FC672235EE45DF23FC7EBDA3C1ED6623FC95FA0FE79825D3FCACE62D1EC82393FCC39D320A4A14D
+3FCDA26D626B5DBC3FCF08DE14A0EEED3FD036D1E6C636973FD0E88E6F9175703FD199F2BC691FF8
+3FD24B1CE751511A3FD2FC415F378E4D3FD3AD613F3322F83FD45E7A06F8025D3FD50F7E40893841
+3FD5C0695166AD023FD671292D29A0763FD721CCAFD0DA6F3FD7D22E4BDC430D3FD8822BF1A79E24
+3FD931A63A41E3763FD9E067A1C316663FDA8E6831E71FB33FDB3B507983EA8D3FDBE712A77B8985
+3FDC9178011EAC263FDD3A79DECE48063FDDE1D23CB5BFE13FDE8760A072FD8D3FDF2B0F0F3C0FAD
+3FDFCCADC9FA621B3FE0362687B08F413FE084DD62F8B0173FE0D293C2AD09683FE11F1E7A8E35AB
+3FE16A91C3DF44B73FE1B4D82011C46C3FE1FE04E997E2F73FE246194C4939473FE28D1CE52709F8
+3FE2D319893D56D13FE318156F3FCB9E3FE35C14B83CCA2F3FE39F1B9AC4FD3A3FE3E1341B09AA04
+3FE422610BE59FE43FE462B46E6F30223FE4A233604DECF63FE4E0E9281946203FE51EDA4CE093F7
+3FE55C1CBBB768A53FE598BBEE43CB9C3FE5D4C80DB6FB303FE61030366C27193FE64B15EDE55F68
+3FE6857A38050B423FE6BF6FEABD2CA23FE6F8F0DA1A3BCD3FE732041BFC79923FE76AB2B14D8B0A
+3FE7A318E6759E1F3FE7DB3D7D1F07983FE8132848F8B89E3FE84AD113F3D6A93FE8826358C7E5D5
+3FE8B9E66565C5593FE8F15EA155A8E73FE928D36CC434D03FE9604A2E7152E63FE997E9F8E48C2C
+3FE9CFB0C9FCAC663FEA07BDE649C48E3FEA40141A2E4AE53FEA78D70254BB953FEAB215EF0E37F5
+3FEAEBF26398C97E3FEB268E0B8803C93FEB6207EACB145D3FEB9E74DAF9455E3FEBDC1C59B07BDA
+3FEC1B19B94C53EA3FEC5BF56B9E7C2C3FEC9ED567637F993FECE45D0C96DE9F3FED2D2256EFA025
+3FED7A3902CDD4C73FEDCC57DDF5E6273FEE2A48AF82DBEE3FEE898447615F543FEF1CFBAE19FE3D
+3FF0000000000000
+
+ 23F4118C4383DBFCE3F508F922CB176CD3F5736E8497A0ADE3F5E311EF6C4B402
+3F6284688C78B3273F65F7232D7F8D863F69700A1E20642B3F6CF355327C1EFB3F7040F585ECF9E4
+3F720DD76421CC003F73E24D196C2BD03F75BECA62F40A693F77A31C06A08C283F798F616DF4A3AB
+3F7B83EE8B411EED3F7D81D27F57E1653F7F88D4853498B23F80CCB04045C8533F81D9FFEDA6EDC1
+3F82EBDCD1C5C4F23F840394B7D7883A3F85201C1BC8A9A53F8642A93DB6E3D93F876AC78E078444
+3F889873FC7B153E3F89CC5579566FE43F8B064190EC8BAC3F8C46D735C386A63F8D8DB49B0A39D7
+3F8EDB4533F606063F9017EDA222D0D93F90C5E9FDEDBD393F917766753BF1533F922C8C5B868668
+3F92E6247B21FF6C3F93A31197FD4D9E3F94640EFA603B3A3F952A09C0F2F95E3F95F409AB666939
+3F96C274CD6A2CEC3F9795A80DB4029D3F986DA0ACCB97443F994ACE351614143F9A2D2F745D14B9
+3F9B14C7C7CC18613F9C0254C4A2C1A93F9CF55DB4399F023F9DEE601C496CF63F9EEDB3810E29A3
+3F9FF385D6C505FB3FA07FFD684A32833FA109B52FC9BD5C3FA19709C72AC3BD3FA22836B4B41123
+3FA2BD6FB5D1B48A3FA356CC6B630F293FA3F4499F59BB613FA4965F9F3EB9493FA53D4AB74FCB15
+3FA5E93999425A863FA69A211BE76BE33FA7509445B810863FA80D01EDB563983FA8CF7EB6F58B9E
+3FA9980D1E7FC39B3FAA67A0DC166BB73FAB3EC735A1F8683FAC1CC1E2782F1F3FAD03C5D536721F
+3FADF31F95955B9E3FAEEAB6A10681B93FAFEE99AC29591F3FB07D85E819D5153FB109F4379CDE0D
+3FB19C908D282E2B3FB23568FE7EA1023FB2D66EDC637A2E3FB37E92D26C28143FB42F82E8FFCF2A
+3FB4EA2156F2FB883FB5AFCFD97A72553FB67FF55CCB1C363FB75DFA7366EA343FB84B484EE07F7A
+3FB947F2625303F93FBA590873E3662C3FBB7F706B8BC1853FBCBFDA48980FA63FBE1EA572330EDE
+3FBFA1927F57CAE13FC0A8A952ECF5C63FC19CB9DD84BBB73FC2B45725066A483FC3FDB75A6E20FF
+3FC588347A5AFF583FC77D59A45BFB3C3FCA19EC718D3B913FCE3719256CC00E3FD35F24175849D1
+3FF0000000000000
+
+ 33FBF01119D1B68253FC44BA7288893DB3FC6FE4188EEB7473FC93DB8324CFF5B
+3FCB1D30DB34DC483FCCC17EFDF9C2E83FCE3C9B62905F033FCF98449A76A5D13FD06DB971F530BE
+3FD105519FB44C063FD194B4EB7529F23FD21D32C3C0B2713FD29FDC476481B53FD31D53215D482A
+3FD3966FE12B8F3F3FD40B95F8DAC0AE3FD47D6446CD0E813FD4EC104EB829893FD557F2FA68D75D
+3FD5C145233B113F3FD6283F181094123FD68D2F9B4E34693FD6F04904A2A8A63FD751AF0CDEA868
+3FD7B1865F50E76F3FD80FF6CB7CDC3D3FD86D1B6915B9A13FD8C8F70626979F3FD923B37682AB98
+3FD97D6304DA149E3FD9D627F34CB2D53FDA2E02480A44F23FDA8517C9FFCD2D3FDADB6B6F4474C7
+3FDB311246363E9D3FDB8615EDA86CEC3FDBDA9EB004EEB33FDC2EA19CAB76923FDC821B482D863F
+3FDCD532F2BABEDE3FDD27F00A69E9D23FDD7A68473D99933FDDCC87642317363FDE1E68412C65A3
+3FDE70091C72C0FB3FDEC181CFD5478D3FDF12D8D2F52AEA3FDF6414487F1D5D3FDFB54764F424E6
+3FE0033655E3187C3FE02BD5328D686D3FE054719897750A3FE07D1D19B5A5453FE0A5D31CC42A4C
+3FE0CEACAEF86E343FE0F792C30107323FE120A8B6F30D243FE149C3A21BF86B3FE17332A86F3B46
+3FE19CA7A560ABC33FE1C662BA51A85C3FE1F057D55038223FE21A8E411509DC3FE2450586DC2E07
+3FE26FC570CEC2093FE29AE05B547A633FE2C6595F8F30413FE2F22427E548D93FE31E66E744150B
+3FE34B17F27B495E3FE378482CD454AC3FE3A603E4FF7DE33FE3D448F3CC35463FE4033297A18DBA
+3FE432BCCA0363B63FE46309A20B6D8A3FE49423A577AA1C3FE4C62378F9B8A53FE4F8FB2371B224
+3FE52CECADBACE2E3FE56201E3684B833FE59853309FDB8C3FE5D00993AFD5803FE6094BFDD26610
+3FE6445060CEC1343FE6815106B38DEE3FE6C0781203B4303FE702236DDEC0703FE746B5C6638A66
+3FE78EC5AB11C5873FE7DADAF1F17B573FE82BC0AB7FB48C3FE882CE5A74DD9D3FE8E16613739208
+3FE94ACBDCC3A34F3FE9C179CD84D2BC3FEA522CEFA361E03FEAFC10377450B13FEC30040BD2DDE9
+3FF0000000000000
+
+ 43F8AB0165E12A3E73F9A920A2A22A8AF3FA3C9D0A2CF92363FAA3DD980C2A7E8
+3FB05203FB5F35893FB37F59F91744383FB6A9405663B9083FB9CF93FCE55F6C3FBCF2C496BEE908
+3FC009506A4346F93FC197DEFFE805833FC3250C460DB95D3FC4B12D5C67678C3FC63C64FF84FBA4
+3FC7C6D41D1E27CC3FC95016654366573FCAD8AD2620E1EA3FCC6033E895D36C3FCDE6C239117CD2
+3FCF6C5D5EFE6F313FD0788A2359F33C3FD13A9C3CC651F13FD1FC294273361E3FD2BD4F534B3FAA
+3FD37DE81BCA4B3D3FD43E0722D7BE4C3FD4FDB59AD52C6B3FD5BD137DFFB6BD3FD67BCBAEFABDDF
+3FD73A17F1884B783FD7F78746730DDA3FD8B48DC9B2D9883FD970D8B5435D323FDA2CC957E60247
+3FDAE806D8D0D77F3FDBA29C4A7EDAC43FDC5C7F1247CA8B3FDD15C4EC9A99FC3FDDCE46DF4182EE
+3FDE85EBDC32BEE43FDF3CDE887B8D393FDFF3383D134FF03FE05462D728FC223FE0AEB61AF30454
+3FE108949466C3863FE16206EE3B86E63FE1BB0517FD46393FE21391BF01B3193FE26B9F3D989D2D
+3FE2C32CA786DC323FE31A363A8CE6653FE370B27B4217D93FE3C69494F11D9A3FE41BEF8E449FE6
+3FE470C32805671C3FE4C50E94F265D93FE518B3CBC88B6B3FE56BB4AE9E47F63FE5BE1226917A24
+3FE60FD58E0944FA3FE660F0D134D1343FE6B16F8FD6E0923FE70142094005883FE750771DA6C27C
+3FE79EE1717AA4B63FE7ECA3C2DCA6573FE8399FA53FC8373FE885EAA279E9993FE8D15520C15BB9
+3FE91C07424B67A83FE965E7828A21F83FE9AF0672D973733FE9F73993F44DBB3FEA3EAC36FC27E8
+3FEA85444262EDAA3FEACAFCC1F5444A3FEB0FD684652B823FEB53C458C620173FEB96D5E359F92F
+3FEBD8EBD4D838E53FEC1A0A29E223683FEC5A1DB9D2A1643FEC9940A510B7903FECD759D3D74DB8
+3FED1480FB525A053FED507DBCDA658D3FED8B63A8B96FB03FEDC51E0FB0B8F13FEDFDAA9B9C589D
+3FEE34F0675604AB3FEE6AFDDC5C70093FEE9F92D49AB6C93FEED2DB05648EF23FEF049527784141
+3FEF3496B77BBE873FEF62EE624925DE3FEF8E9B88EE17A43FEFB9A85D134C4E3FEFDDCE10B539DB
+3FF0000000000000
+
+ 53F8AC72DF79F38FE3F9AA61DAB7556EE3FA3D33469501C1B3FAA49D01685CB9A
+3FB0584EFB01B2CF3FB3871657CEBE3D3FB6B091A62E26093FB9D6C7D3FA02463FBCF9315DB8F432
+3FC00C5A63D1D0993FC19AB5C832EE2C3FC327F2868631023FC4B4356A43DBB23FC63EF76CA7FB6D
+3FC7C9257054EB923FC951D2A2AB267E3FCADA5E8C3BC19B3FCC61ADA1F967D73FCDE896A6C996E4
+3FCF6E3F7CD0F0313FD0797CEFC3BBB83FD13B6FE4BD50023FD1FCDD9B40F7F03FD2BDF0281F999B
+3FD37E8B057892583FD43E9FE524D26C3FD4FE5448192DFF3FD5BD85D047D3643FD67C32EA4E58F5
+3FD73A450B3D54EA3FD7F7AE0394C9223FD8B490EF98C6F43FD970C08BB4B1823FDA2C6E0CF004BE
+3FDAE77C9D9263763FDBA1F3852EE9683FDC5B8B312B846A3FDD146D2D992C203FDDCCAEB39A32A4
+3FDE8447FA4AE5413FDF3B1EFB57E8E93FDFF10C25F09E4A3FE0531DCC86CD323FE0AD405B649059
+3FE106F1D670572D3FE160494BB87AA13FE1B91EA5A5E37F3FE2118524576F9C3FE2694BB1ABF32B
+3FE2C09C9092C9183FE3176EA4BF64743FE36DB30103845C3FE3C382EFBD8FF93FE418C21357079C
+3FE46D6075EAFE843FE4C173F76736F03FE514E87AC842D83FE567E1A16A3C6B3FE5BA23B0B45357
+3FE60BC6485858463FE65CC639EA24333FE6AD1D8A06C5BB3FE6FCCAC19CC1BA3FE74BC36A15D210
+3FE799FC6888B41A3FE7E7872BAFBE0C3FE83450D8D2951E3FE88075416E2F603FE8CBD2EA177CDF
+3FE9166CBEFEE9323FE960365CF50CB93FE9A945CF0125F83FE9F17E0064417B3FEA38F2E0AA2A34
+3FEA7F82F7B5BD5C3FEAC53C9A83CD413FEB0A0BC226D0A03FEB4DF4BB69AAD13FEB90F4494D98E6
+3FEBD31ABDC89AA13FEC144F8E3FDD623FEC549455787D5F3FEC93D5613727853FECD20AF1D53650
+3FED0F3F681785453FED4B62B3C9E2F83FED866B3EAB2CD23FEDC05563BB41823FEDF91C094D5958
+3FEE30B3B7B6EF043FEE66FC141F7DCA3FEE9BF28A06C2C23FEECF77268FF3C53FEF0190285327EF
+3FEF31EB438BE6E43FEF60BFE374A6613FEF8CE342A8EB023FEFB88887C49CB13FEFDD346E512655
+3FF0000000000000
+
+ 63F847AE147AE14803F947AE147AE14803F9EB851EB851EC03FA47AE147AE1480
+3FA99999999999A03FAEB851EB851EC03FB1EB851EB851F03FB47AE147AE14803FB70A3D70A3D710
+3FB99999999999A03FBC28F5C28F5C303FBEB851EB851EC03FC0A3D70A3D70A83FC1EB851EB851F0
+3FC33333333333383FC47AE147AE14803FC5C28F5C28F5C83FC70A3D70A3D7103FC851EB851EB858
+3FC99999999999A03FCAE147AE147AE83FCC28F5C28F5C303FCD70A3D70A3D783FCEB851EB851EC0
+3FD00000000000043FD0A3D70A3D70A83FD147AE147AE14C3FD1EB851EB851F03FD28F5C28F5C294
+3FD33333333333383FD3D70A3D70A3DC3FD47AE147AE14803FD51EB851EB85243FD5C28F5C28F5C8
+3FD666666666666C3FD70A3D70A3D7103FD7AE147AE147B43FD851EB851EB8583FD8F5C28F5C28FC
+3FD99999999999A03FDA3D70A3D70A443FDAE147AE147AE83FDB851EB851EB8C3FDC28F5C28F5C30
+3FDCCCCCCCCCCCD43FDD70A3D70A3D783FDE147AE147AE1C3FDEB851EB851EC03FDF5C28F5C28F64
+3FE00000000000043FE051EB851EB8563FE0A3D70A3D70A83FE0F5C28F5C28FA3FE147AE147AE14C
+3FE199999999999E3FE1EB851EB851F03FE23D70A3D70A423FE28F5C28F5C2943FE2E147AE147AE6
+3FE33333333333383FE3851EB851EB8A3FE3D70A3D70A3DC3FE428F5C28F5C2E3FE47AE147AE1480
+3FE4CCCCCCCCCCD23FE51EB851EB85243FE570A3D70A3D763FE5C28F5C28F5C83FE6147AE147AE1A
+3FE666666666666C3FE6B851EB851EBE3FE70A3D70A3D7103FE75C28F5C28F623FE7AE147AE147B4
+3FE80000000000063FE851EB851EB8583FE8A3D70A3D70AA3FE8F5C28F5C28FC3FE947AE147AE14E
+3FE99999999999A03FE9EB851EB851F23FEA3D70A3D70A443FEA8F5C28F5C2963FEAE147AE147AE8
+3FEB33333333333A3FEB851EB851EB8C3FEBD70A3D70A3DE3FEC28F5C28F5C303FEC7AE147AE1482
+3FECCCCCCCCCCCD43FED1EB851EB85263FED70A3D70A3D773FEDC28F5C28F5C93FEE147AE147AE1B
+3FEE66666666666D3FEEB851EB851EBF3FEF0A3D70A3D7113FEF5C28F5C28F633FEFAE147AE147B5
+3FF0000000000000
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2013_I1208923/1jet.LO-7TeV.y.1e-7.vBa
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2013_I1208923/1jet.LO-7TeV.y.1e-7.vBa (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2013_I1208923/1jet.LO-7TeV.y.1e-7.vBa (revision 1772)
@@ -0,0 +1,88 @@
+
+ 13FA7CBB860D8DF903FB2B3A871FBB9273FB71994F161BB593FBB5A4C6B13CA38
+3FBF13267E4245A23FC14A36F0AC6CD43FC2F269681802213FC4892F7C979AF53FC611D54185C773
+3FC78FB9627FDC993FC9046829CB59293FCA7242164771D53FCBD9EA6EBA12513FCD3CDF444F9B7B
+3FCE9B98D37EF25A3FCFF6E11DB94E203FD0A79FFB6E47363FD152862CB2512F3FD1FC891C783D97
+3FD2A59E34004B533FD34E0BB8CEFB6E3FD3F599586F9F7E3FD49C89C5C563DD3FD542C53BA6A143
+3FD5E8673271A6963FD68D6734DFC6953FD731CB4B9E62133FD7D59F561D1CB53FD878C334E67BB9
+3FD91B23A7039D363FD9BC97007343243FDA5D1F20D026483FDAFCAC68BCF9AE3FDB9B48AE726D52
+3FDC38D4AEC6FE8E3FDCD5277692EFE03FDD7032592E15B43FDE09E072A742AD3FDEA238698153E7
+3FDF39123C1A74283FDFCE781A0DE86A3FE0312198EB96FE3FE07A483FA448AE3FE0C2948D68AC87
+3FE10A15A69998FE3FE150C915296A6B3FE196B66A24B6AB3FE1DBD307114A6A3FE22021739FEDC8
+3FE263A65C9DAE273FE2A66B253C73763FE2E873279948E23FE329BCE42652FB3FE36A5553682841
+3FE3AA339374F9FC3FE3E96BE9CDA3183FE427FDB4E41B363FE465F8FEB0DF863FE4A359B21F3B6B
+3FE4E02D0A976A673FE51C763C437A343FE558437A55710F3FE59394D1EEE77F3FE5CE75357B0C1C
+3FE608E996C2C17F3FE643019671F1D63FE67CBF1AE005753FE6B629FF5F6A943FE6EF4DC9E916B6
+3FE7282F605031A13FE760DD7956231B3FE79956DEB6AB373FE7D1B7A31FD70A3FE809FBB916BDAD
+3FE8423FB60EC3583FE87A815A3A93BB3FE8B2D57DAEB0663FE8EB4451BFBBAC3FE923DA5D3B60DA
+3FE95CADF944DA323FE995C3215525313FE9CF4001E1BC3C3FEA092D193BAFD93FEA43B38B7AD7F2
+3FEA7EDF20A08BC73FEABADF904F28473FEAF7CD53D0C4553FEB35E1A47C97C23FEB753A46FCD344
+3FEBB63ACABF70003FEBF91C21C291A83FEC3E6087B6DD033FEC8681394090A83FECD251F42E9245
+3FED23236E1F1E723FED796E2E1C6A0C3FEDDDF83D87ABA83FEE434F32537CE13FEEEB22353014EF
+3FF0000000000000
+
+ 23F411D97476075A53F508DAC61631F273F572AD39647485E3F5E11F4448BBCBB
+3F6267C874071D1E3F65C94CF1B62CA73F692D69DE0394A83F6C98DC422863853F7006C2E1B2F162
+3F71C59D6BD7C5923F738ABDCB1DCD553F7556410798E3A63F7728336A092F353F790111665BB6C6
+3F7AE17CB9BCE2BF3F7CC9761CC797F43F7EB9660A153CFE3F8058FC447C85D23F8159D1A3A7AEB4
+3F825EEC707D50913F836A3761C3E5893F8477428D21C4803F858C65EDC939D63F86A57FC314336E
+3F87C39F3D98169A3F88E7D2B920BC0D3F8A118F0570146D3F8B414449FF87BB3F8C770F06FF52CB
+3F8DB2E3073830F23F8EF50F038570953F901EE08DD70DD93F90C6B42A527E803F91727905E61C09
+3F92208CFFE04D463F92D47DB0D3A6353F938B0F8FACD5823F944461CCD703343F95048BF4796B7F
+3F95C75880517E4A3F968E57969E8A023F975A7A202F9B503F982B4DE248CAD73F9901070025EB6F
+3F99DBBD823A6BEA3F9ABBACD5694BC03F9BA114AF2C24D83F9C8C8D80EE571B3F9D7D9DF99B402D
+3F9E747905988EC43F9F724CE8FFCB053FA03B62B98019753FA0C0FBC47FDE343FA14A45341CDA3E
+3FA1D74CDAED4D183FA26851C8176B333FA2FD7C191A37D13FA39709037560CE3FA4350436B499E6
+3FA4D7C2B46E8A6F3FA57FED306895D33FA62D0552D6F0C53FA6DF9D90B77B8C3FA7983F93134CC0
+3FA85725B281BD463FA91C7AA45647C13FA9E8BE4D959B483FAABCC121B010373FAB987AC5987136
+3FAC7C4F833398093FAD69E1296284663FAE603F08C8B8E63FAF61836C5EE0293FB03766126B647C
+3FB0C33D836B79243FB15615E1F108983FB1EFE3425500F53FB291936D99777B3FB33BED20E089A5
+3FB3EF380228EEA83FB4AC95174934603FB576E301D183E93FB64C77E344E0203FB73141CD72E0B2
+3FB82694571753503FB92DFE88E55C363FBA4BDE55D2F7BD3FBB82CC526BD9C73FBCD73C939E6760
+3FBE4FED9AA0C0013FBFF494D04E1A763FC0E84E01BA75D03FC1F9ECE9A580CC3FC33B0270103ABF
+3FC4BFA740842F8E3FC6AA310B9FE7133FC93CF943AFAAEB3FCD4FFA39BE9D6C3FD2E4AD19CF1435
+3FF0000000000000
+
+ 33FC04FB0CBCBC9743FC52E3F3D0BA4393FC7E51D21C119F93FCA225FBC331C87
+3FCBFFB6AAE59AEC3FCD9FD1C17D7E5D3FCF16DBF89D1DD43FD036EA528978473FD0D61E7214C219
+3FD16B4B300CB14B3FD1F84104EDE9EA3FD27E44195A93233FD2FE5D953B6B683FD3795658F220C3
+3FD3EFE16C17DFE83FD4628256900FDF3FD4D1B17B4DE6093FD53DB8FD2B98C93FD5A703760CCC62
+3FD60DC81416CD9A3FD672586689DB423FD6D4C3D31E29153FD73555CD047B8B3FD7942F1BD7B7B1
+3FD7F17660176FDA3FD84D4A6E77EACE3FD8A7C9D6BCFAD93FD9011B07E393163FD9594949D400E1
+3FD9B070B06547A93FDA06B0BB3420923FDA5C174735BC413FDAB0B1DB778D4E3FDB0485D61AA096
+3FDB57B73DF6477F3FDBAA40030FBA303FDBFC3D9FE194423FDC4DBC1F2A43053FDC9EC69B53485E
+3FDCEF6B342443023FDD3FA8D7FE682B3FDD8F90CF501F363FDDDF2B4B767B123FDE2E96C5469D09
+3FDE7DCC78E66BE03FDECCDB57B1D3FD3FDF1BCA26F659E13FDF6A9ABD0DAF8E3FDFB95F1935AF0D
+3FE00410C35333373FE02B77022F00F43FE052E5D6671DEA3FE07A5C936CCC433FE0A1E1E25D0B4B
+3FE0C97EAD42FF3D3FE0F138885855D33FE1190F8CE6741B3FE140FEF004C8733FE16920FADF57C6
+3FE1916AFBB2752E3FE1B9EE3D7D9BF63FE1E2AC2A4988DF3FE20BACFFB8F7F73FE234EC53E116D9
+3FE25E7EE9E9F60F3FE288643D5A2C2A3FE2B2A126E909B83FE2DD38B7A0CB9E3FE30841033BC112
+3FE333B69B12E9F13FE35FAA7EBFA5803FE38C1FB8D61E7D3FE3B92F9090CE523FE3E6E02DCD35D2
+3FE41531F16FDEBA3FE444473EAE502C3FE4741FC67C7EEC3FE4A4D674319FCD3FE4D681E381728B
+3FE5093327D805753FE53D09485C1F143FE57222ACFC7C4B3FE5A89E42D7F31C3FE5E0A334B074CC
+3FE61A64E3CDAD243FE6561C07DA049F3FE693FD908DE14E3FE6D4653EDB1DA33FE717C1567CD4E0
+3FE75E9527722B2E3FE7A96E94ACB3983FE7F93EC815ACBA3FE84F202695E68B3FE8ACD3317D9A8C
+3FE915144C3A7EDB3FE98B795ACF09413FEA1B144B889D253FEAC638019ADF133FEBFD2EE3AF761E
+3FF0000000000000
+
+ 43F847AE147AE14803F947AE147AE14803F9EB851EB851EC03FA47AE147AE1480
+3FA99999999999A03FAEB851EB851EC03FB1EB851EB851F03FB47AE147AE14803FB70A3D70A3D710
+3FB99999999999A03FBC28F5C28F5C303FBEB851EB851EC03FC0A3D70A3D70A83FC1EB851EB851F0
+3FC33333333333383FC47AE147AE14803FC5C28F5C28F5C83FC70A3D70A3D7103FC851EB851EB858
+3FC99999999999A03FCAE147AE147AE83FCC28F5C28F5C303FCD70A3D70A3D783FCEB851EB851EC0
+3FD00000000000043FD0A3D70A3D70A83FD147AE147AE14C3FD1EB851EB851F03FD28F5C28F5C294
+3FD33333333333383FD3D70A3D70A3DC3FD47AE147AE14803FD51EB851EB85243FD5C28F5C28F5C8
+3FD666666666666C3FD70A3D70A3D7103FD7AE147AE147B43FD851EB851EB8583FD8F5C28F5C28FC
+3FD99999999999A03FDA3D70A3D70A443FDAE147AE147AE83FDB851EB851EB8C3FDC28F5C28F5C30
+3FDCCCCCCCCCCCD43FDD70A3D70A3D783FDE147AE147AE1C3FDEB851EB851EC03FDF5C28F5C28F64
+3FE00000000000043FE051EB851EB8563FE0A3D70A3D70A83FE0F5C28F5C28FA3FE147AE147AE14C
+3FE199999999999E3FE1EB851EB851F03FE23D70A3D70A423FE28F5C28F5C2943FE2E147AE147AE6
+3FE33333333333383FE3851EB851EB8A3FE3D70A3D70A3DC3FE428F5C28F5C2E3FE47AE147AE1480
+3FE4CCCCCCCCCCD23FE51EB851EB85243FE570A3D70A3D763FE5C28F5C28F5C83FE6147AE147AE1A
+3FE666666666666C3FE6B851EB851EBE3FE70A3D70A3D7103FE75C28F5C28F623FE7AE147AE147B4
+3FE80000000000063FE851EB851EB8583FE8A3D70A3D70AA3FE8F5C28F5C28FC3FE947AE147AE14E
+3FE99999999999A03FE9EB851EB851F23FEA3D70A3D70A443FEA8F5C28F5C2963FEAE147AE147AE8
+3FEB33333333333A3FEB851EB851EB8C3FEBD70A3D70A3DE3FEC28F5C28F5C303FEC7AE147AE1482
+3FECCCCCCCCCCCD43FED1EB851EB85263FED70A3D70A3D773FEDC28F5C28F5C93FEE147AE147AE1B
+3FEE66666666666D3FEEB851EB851EBF3FEF0A3D70A3D7113FEF5C28F5C28F633FEFAE147AE147B5
+3FF0000000000000
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2013_I1208923/fnl2332d.1jet.RV-fastprod.conf
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2013_I1208923/fnl2332d.1jet.RV-fastprod.conf (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2013_I1208923/fnl2332d.1jet.RV-fastprod.conf (revision 1772)
@@ -0,0 +1,23 @@
+[global]
+include = nnlojet-gc.conf
+
+[jobs]
+;jobs = 10 ; Max. # of jobs (truncated to module maximum), D=mod
+;wall time = 3:00 ; Requested wall time in hh[:mm[:ss]] (also used for proxy lifetime)
+
+[parameters] ; This section defines the parameter space
+repeat = 1 ; How many times each parameter space point should be sampled
+parameters = ( SEED , EVENTS )
+SEED = range( 60000, 65000 )
+SEED type = expr
+;EVENTS = 13000
+;EVENTS = 150000
+EVENTS = 170000
+
+[UserTask]
+executable = fnlo-run-nnlojet.csh
+arguments = fnl2332d 1jet RV fastprod
+subst files = fnl2332d.1jet.RV-fastprod.run
+; NNLOJET production run
+input files = fnlo-run-nnlojet.pl fastNLO_v23_source_nnlojet_cvmfs.csh fnl2332d.1jet.RV-fastprod.run 1jet.RV-7TeV.y.1e-7.vRa jet.RV-7TeV.ptji_incl_y1.wrm jet.RV-7TeV.ptji_incl_y2.wrm jet.RV-7TeV.ptji_incl_y3.wrm jet.RV-7TeV.ptji_incl_y4.wrm jet.RV-7TeV.ptji_incl_y5.wrm jet.7TeV.ptji_incl_y1.wrm jet.7TeV.ptji_incl_y2.wrm jet.7TeV.ptji_incl_y3.wrm jet.7TeV.ptji_incl_y4.wrm jet.7TeV.ptji_incl_y5.wrm
+output files = fnl2332d.1jet.RV-fastprod.tar.gz
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2013_I1208923/fnl2332d.1jet.RRb-warm.run
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2013_I1208923/fnl2332d.1jet.RRb-warm.run (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2013_I1208923/fnl2332d.1jet.RRb-warm.run (revision 1772)
@@ -0,0 +1,168 @@
+NNLOJET_RUNCARD
+RRb-7TeV ! Job name id, must be less than 10 characters
+1jet ! Process name
+5000000 ! Number of events
+10 ! Number of iterations
+5 ! Seed number
+.true. ! Warmup
+.false. ! Production
+CT14nnlo ! PDF set
+0 ! PDF member
+antikt ! Jet algorithm, accepts 'kt', 'cam' or 'antikt'
+0.7d0 ! Rcut
+.false. ! exclusive
+0 ! Heavy particle decay type
+.1e-7 ! Technical cutoff y0
+.false. ! angular averaging of the phase space, default to true
+2 ! Virtual Integration method, use 2 if you're not sure
+b ! RR a/b region flag. Accepts 'a','b' or 'all'.
+0 ! set to zero for MC, 2 for point test
+.false. ! print max weight flag
+.true. ! momentum mapping and PDF storage flag
+.true. ! colour sampling flag
+.false. ! explicit pole check flag, stops integration when set to true
+
+PHYSICAL_PARAMETERS
+7000d0 ! roots
+125d0 ! Mass of the Higgs Boson
+0.004029643852d0 ! Width of the Higgs Boson
+91.1876d0 ! Mass of the Z Boson
+2.4952d0 ! Width of the Z Boson
+80.398d0 ! Mass of the W Boson
+2.1054d0 ! Width of the W Boson
+173.2d0 ! Mass of the Top Quark
+1.41d0 ! Width of the Top Quark
+4.18d0 ! Mass of the Bottom Quark
+0d0 ! Width of the Bottom Quark
+1.275d0 ! Mass of the Charm Quark
+0d0 ! Width of the Charm Quark
+
+! UNIT_PHASE
+
+SELECTORS
+ select jets_pt min = 114 max = 2116
+ select jets_abs_y max = 2.5
+ select njets min = 1
+END_SELECTORS
+
+
+
+HISTOGRAMS
+
+COMPOSITE > xptj0_y1 [114.0,133.0,153.0,174.0,196.0,220.0,245.0,272.0,300.0,330.0,362.0,395.0,430.0,468.0,507.0,548.0,592.0,638.0,686.0,737.0,790.0,846.0,905.0,967.0,1032.0,1101.0,1172.0,1248.0,1327.0,1410.0,1497.0,1588.0,1784.0,2116.0]
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y2 [114.0,133.0,153.0,174.0,196.0,220.0,245.0,272.0,300.0,330.0,362.0,395.0,430.0,468.0,507.0,548.0,592.0,638.0,686.0,737.0,790.0,846.0,905.0,967.0,1032.0,1101.0,1172.0,1248.0,1327.0,1410.0,1784.0]
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y3 [114.0,133.0,153.0,174.0,196.0,220.0,245.0,272.0,300.0,330.0,362.0,395.0,430.0,468.0,507.0,548.0,592.0,638.0,686.0,737.0,790.0,846.0,905.0,967.0,1032.0,1101.0,1172.0,1684.0]
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y4 [114.0,133.0,153.0,174.0,196.0,220.0,245.0,272.0,300.0,330.0,362.0,395.0,430.0,468.0,507.0,548.0,592.0,638.0,686.0,737.0,790.0,846.0,905.0,967.0,1248.0]
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y5 [114.0,133.0,153.0,174.0,196.0,220.0,245.0,272.0,300.0,330.0,362.0,395.0,430.0,468.0,507.0,548.0,592.0,638.0,686.0,905.0]
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+END_HISTOGRAMS
+
+SCALES
+ muf = ptj1 mur = ptj1
+END_SCALES
+
+!####### SYNTAX ######################
+!##
+!## REWEIGHT {observable-name}**{val_power}
+!##
+!#####################################
+
+! REWEIGHT ht_part**4
+! REWEIGHT ht_part**1.4 !# DB
+REWEIGHT ht_part**6.5 !# KR
+
+CHANNELS
+ RR
+END_CHANNELS
+
+SETUP
+END_SETUP
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2013_I1208923/fnl2332d.1jet.LO-fastprod.run
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2013_I1208923/fnl2332d.1jet.LO-fastprod.run (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2013_I1208923/fnl2332d.1jet.LO-fastprod.run (revision 1772)
@@ -0,0 +1,174 @@
+NNLOJET_RUNCARD
+LO-7TeV ! Job name id, must be less than 10 characters
+1jet ! Process name
+@EVENTS@ ! Number of events
+1 ! Number of iterations
+@SEED@ ! Seed number
+.false. ! Warmup
+.true. ! Production
+CT14nnlo ! PDF set
+0 ! PDF member
+antikt ! Jet algorithm, accepts 'kt', 'cam' or 'antikt'
+0.7d0 ! Rcut
+.false. ! exclusive
+0 ! Heavy particle decay type
+.1e-7 ! Technical cutoff y0
+.false. ! angular averaging of the phase space, default to true
+2 ! Virtual Integration method, use 2 if you're not sure
+all ! RR a/b region flag. Accepts 'a','b' or 'all'.
+0 ! set to zero for MC, 2 for point test
+.false. ! print max weight flag
+.true. ! momentum mapping and PDF storage flag
+.true. ! colour sampling flag
+.false. ! explicit pole check flag, stops integration when set to true
+
+PHYSICAL_PARAMETERS
+7000d0 ! roots
+125d0 ! Mass of the Higgs Boson
+0.004029643852d0 ! Width of the Higgs Boson
+91.1876d0 ! Mass of the Z Boson
+2.4952d0 ! Width of the Z Boson
+80.398d0 ! Mass of the W Boson
+2.1054d0 ! Width of the W Boson
+173.2d0 ! Mass of the Top Quark
+1.41d0 ! Width of the Top Quark
+4.18d0 ! Mass of the Bottom Quark
+0d0 ! Width of the Bottom Quark
+1.275d0 ! Mass of the Charm Quark
+0d0 ! Width of the Charm Quark
+
+! UNIT_PHASE
+
+SELECTORS
+ select jets_pt min = 114 max = 2116
+ select jets_abs_y max = 2.5
+ select njets min = 1
+END_SELECTORS
+
+
+
+HISTOGRAMS
+
+COMPOSITE > xptj0_y1 [114.0,133.0,153.0,174.0,196.0,220.0,245.0,272.0,300.0,330.0,362.0,395.0,430.0,468.0,507.0,548.0,592.0,638.0,686.0,737.0,790.0,846.0,905.0,967.0,1032.0,1101.0,1172.0,1248.0,1327.0,1410.0,1497.0,1588.0,1784.0,2116.0] grid=ptji_incl_y1.fast
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y2 [114.0,133.0,153.0,174.0,196.0,220.0,245.0,272.0,300.0,330.0,362.0,395.0,430.0,468.0,507.0,548.0,592.0,638.0,686.0,737.0,790.0,846.0,905.0,967.0,1032.0,1101.0,1172.0,1248.0,1327.0,1410.0,1784.0] grid=ptji_incl_y2.fast
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y3 [114.0,133.0,153.0,174.0,196.0,220.0,245.0,272.0,300.0,330.0,362.0,395.0,430.0,468.0,507.0,548.0,592.0,638.0,686.0,737.0,790.0,846.0,905.0,967.0,1032.0,1101.0,1172.0,1684.0] grid=ptji_incl_y3.fast
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y4 [114.0,133.0,153.0,174.0,196.0,220.0,245.0,272.0,300.0,330.0,362.0,395.0,430.0,468.0,507.0,548.0,592.0,638.0,686.0,737.0,790.0,846.0,905.0,967.0,1248.0] grid=ptji_incl_y4.fast
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y5 [114.0,133.0,153.0,174.0,196.0,220.0,245.0,272.0,300.0,330.0,362.0,395.0,430.0,468.0,507.0,548.0,592.0,638.0,686.0,905.0] grid=ptji_incl_y5.fast
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+END_HISTOGRAMS
+
+SCALES
+ muf = ptj1 mur = ptj1
+ muf = 2.718281828 mur = 2.718281828
+ muf = 4.48168907 mur = 4.48168907
+ muf = 4.48168907 mur = 2.718281828
+ muf = 2.718281828 mur = 4.48168907
+ muf = 12.18249396 mur = 2.718281828
+ muf = 2.718281828 mur = 12.18249396
+END_SCALES
+
+!####### SYNTAX ######################
+!##
+!## REWEIGHT {observable-name}**{val_power}
+!##
+!#####################################
+
+! REWEIGHT ht_part**4
+! REWEIGHT ht_part**1.4 !# DB
+REWEIGHT ht_part**6.5 !# KR
+
+CHANNELS
+ LO
+END_CHANNELS
+
+SETUP
+END_SETUP
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2013_I1208923/1jet.R-7TeV.y.1e-7.vRa
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2013_I1208923/1jet.R-7TeV.y.1e-7.vRa (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2013_I1208923/1jet.R-7TeV.y.1e-7.vRa (revision 1772)
@@ -0,0 +1,154 @@
+
+ 13F1F1926F33E221A3F3583E6E60ECAB53F454D2BEC916D603F50D052FFB1FC7E
+3F5848EE51EF440A3F6002EA20B9B5E43F64509CD52D70343F6960D1DE8C71443F6EC205B129D058
+3F724282908521363F754312BD7BC35E3F784E40AA2475963F7B821A4004C2E23F7EEC4CAB933CF2
+3F81468903965E4C3F832C3FEAC88C7D3F8520E341B4E4A93F87284BA813EB0F3F89418C86E36C75
+3F8B6AF3731FA6463F8DAAD5310514443F8FFB61BADBFCF23F913109A998FBE13F926D5C448FCBBC
+3F93B387875A12623F9502ED8A3E92593F965BFD33127C983F97BE7AA897CDC63F992A3FDB0690D3
+3F9AA0707B844C323F9C212735EF7D913F9DAB217F7941363F9F3F388F8B53DE3FA06E71B688A2A7
+3FA142C9AB23694F3FA21CE0E9A94D743FA2FD3A6115CF2C3FA3E31D52C181173FA4CF0E8B93C700
+3FA5C16E21CB1EA23FA6BA80240A945B3FA7B98FB8F66E163FA8BF48B2EA06323FA9CBBEF5F58ADF
+3FAADFA5B310E46A3FABFA7C481B04783FAD1CD37EEFB2BE3FAE469A747E0C503FAF791E7C8C5591
+3FB05A2F6E6023193FB0FBE994FAF6353FB1A1D8BBDC9F773FB24C0D88E993AC3FB2FB05184A1722
+3FB3AEC785D95DF23FB467DE9EA5D9B83FB5264D90586CE93FB5E9E2AF0F92BC3FB6B2846D4F023B
+3FB7812E67FF44403FB855C5CC985E683FB9306D1ED0AFFB3FBA11762AFD3E983FBAF97A4642769E
+3FBBE875EA7005503FBCDEF34666E7293FBDDD42B286ED4E3FBEE394BCD7DF123FBFF254EA799848
+3FC084EC8BB158D23FC115337549289F3FC1AAB4877189783FC2459A757012D53FC2E63C87A391ED
+3FC38C8FCD9CBED03FC438FF9150EF6E3FC4EC33DB494D213FC5A676F8ECD4243FC668471BB8F262
+3FC73210F4C2A7893FC80462C01D13BD3FC8E077CB7FB02D3FC9C6DD64B5798E3FCAB8CD4B611401
+3FCBB6EA817F6D023FCCC2EB5E74E25A3FCDDE42F87377B43FCF0ACFD6CC771C3FD0258757922180
+3FD0D0E31340B7793FD189455A748ABC3FD25111D6BD64A43FD32B72CF76450D3FD41D377516D35D
+3FD52DB7552B14733FD66A04207075E13FD7DE376650B0CB3FD9B3AC3D66F5323FDD9EF87167910B
+3FF0000000000000
+
+ 23FB36F649BEED4973FBF0885C83464B63FC3D59571D596D23FC7E2940D6985B2
+3FCBA1699B7CA7CA3FCF204D449B93203FD13B0895FE08453FD2D6E176EC63D93FD466D3FF955870
+3FD5E9A25814BEBA3FD75CABABDCC13D3FD8C1A0EBB4F45B3FDA194F55A9B03D3FDB63F7F3DD7C75
+3FDC9C620DC2D5AC3FDDC0EF621486993FDEDCC76E23055E3FDFC4E302C8AF193FE050A280021DBA
+3FE0A3F0825286403FE0F64644BBB2273FE149A0F443750B3FE197A31F95A4423FE1EB6F868A897F
+3FE23C8420034E883FE28875F3E900133FE2D3D115274BEA3FE31D1BC460B9323FE367481FEE8A3B
+3FE3AE0871D92A263FE3F38234D9503D3FE4374B995C16CF3FE47A6B7066E77A3FE4BBE3ED0BE966
+3FE4FC1843B395853FE53BB3B8515D363FE57A4C0E52A4D93FE5B6BE660D81113FE5F203F96D58AB
+3FE62BC1FCCC924A3FE66551710CEF853FE69E0C9FF2E1493FE6D4B636CB3A223FE70A779208B0D9
+3FE73F46334AE84D3FE7743EC7BD3DA43FE7A86D300E80B53FE7DB67E8CD50453FE80D5EA067A24E
+3FE83E73D69EDFC23FE86EF369F0B89B3FE89F3DF1DCB80B3FE8CE6D86B3D4493FE8FC2F42A99791
+3FE92935A41936703FE95590CB22DBC53FE981EE5BF054C23FE9AD65BAB856FB3FE9D83A7431E18B
+3FEA0284EE04D5E13FEA2C5984C3D1AC3FEA558DBDCE14493FEA7E5020D79CEE3FEAA68F56DBA534
+3FEACE80FC7527673FEAF5E38008ADCA3FEB1CE404BD6C893FEB434CB9F326EB3FEB695542445C06
+3FEB8EFF4D7BF0AE3FEBB3B0A46A48543FEBD7FECE78FC2D3FEBFBEAEEFB53923FEC1FF6FF6EEE76
+3FEC43C50EF232D63FEC672BB42294D73FEC8A7326E5F62C3FECAD63876719843FECD011EDFF5ADA
+3FECF28B1B5447ED3FED14A8E399C14E3FED36A708C68CEF3FED587B924669843FED7A721CB6AF71
+3FED9C8CED0B7E683FEDBE8ED3DC66983FEDE08EF8CA71D53FEE0291E398DB333FEE24D93768FCD2
+3FEE477557FCD8A83FEE6A48B2086D6C3FEE8D4915CE461B3FEEB11424AE84C53FEED4DDDC785E78
+3FEEF88A7980234F3FEF1E3FCB44ED6A3FEF44EF8339EC7A3FEF70541FABD3933FEFAC19BE461A24
+3FF0000000000000
+
+ 33FC9A01F08B080723FD0DBD26F68BEFC3FD2E5358F25CB633FD4419D46EEAD18
+3FD53DE0ABB02EDB3FD60E30B0DAC0733FD6B90D6E4AFCA93FD74D3AB4DA4B983FD7CCC49AE9A787
+3FD83CA318BE1C733FD8A06945A688643FD8FA4FC4551CA63FD94C24C96079773FD99767C7C853D7
+3FD9DD796165637F3FDA1F0544D87C573FDA5C7A506E3FED3FDA96635945D7653FDACD5155897D9E
+3FDB019540328C373FDB3361EE2C9A883FDB632F51BB6C803FDB9155EF24DC233FDBBE276FFF5CCE
+3FDBE9F50D3915EB3FDC1509979B5A943FDC3F8A545BB9F43FDC698A5B7E96D53FDC930C0CBE1D5F
+3FDCBC25567266BB3FDCE4FC26D76A523FDD0D98C7C07F833FDD36067C8698A63FDD5E7346822D5C
+3FDD86DC471F1E833FDDAF4F4543D8C43FDDD7B1802FB6D53FDE00247DBE1DE13FDE28B33BAEEA6A
+3FDE5171A6EC1D963FDE7A6473CF6D4C3FDEA3A12F4FE8133FDECD313AB357633FDEF72F3CE9863E
+3FDF21A684BC56EC3FDF4CB4B78AB7B13FDF785B062F8AF03FDFA4ADADF6E8413FDFD1B53ABF8FA4
+3FDFFF5E202B902A3FE0167E50010F5A3FE02D0E4C92B7D83FE04331E56243153FE058FFE1E1CACE
+3FE06E80EAD4F7B43FE083BEA7D2BEC33FE098C2E95551E43FE0AD8A5D2607B73FE0C2223C821C0A
+3FE0D6918255E9C23FE0EADDBBECEF383FE0FF15121BD8C43FE1133D00F6C39B3FE12758A1C125A5
+3FE13B7518E3F0C63FE14F9A12C658033FE163C77ED08ECF3FE178056701A4133FE18C58FD218830
+3FE1A0C7126621073FE1B556CC9BB50E3FE1CA0D9675A0553FE1DEEEC92B17C63FE1F3F4A983EAD5
+3FE2098D8CBB4BA43FE21F73D1DD45B53FE235EF1E6D7A693FE24D0C2B376B673FE264E8ECDD4C9C
+3FE27DB2AF3B84413FE29797BEBFB8363FE2B2D98D1CDF0D3FE2CF98B109989B3FE2EE113B52D519
+3FE30E73AE987D7F3FE33141ED7C4CCD3FE356CEEDB0BE743FE37F9EDF3C00963FE3AC7BDDF99C64
+3FE3DE0BA8EF4EC83FE4156DE5AF44283FE453D5DA08897F3FE49B492967FECD3FE4F084D18F5405
+3FE5589F1353E7A33FE5DD204058413C3FE68FFE50B9F5BB3FE797A34AB7AFB33FE9D2B74B34E800
+3FF0000000000000
+
+ 43F873A60239CD46B3F97CABC0566FD5A3FA18E01EE0A59333FA75A301F31C8CD
+3FACCCF5E34954BD3FB1229AF7FEFB203FB3C2B1BBAC45423FB668BBE3B5208B3FB8FB600810BC95
+3FBB856B9C27B2D53FBE01E7D5D87C473FC03F2889F03F463FC177994129B2F63FC2AF649BC124D8
+3FC3E4DDFF2DAD473FC51B49DCFC91573FC646B88915C7253FC7922193A3DC323FC8BB92C09D7914
+3FC9E380C92DC6CD3FCB1F2096063A4C3FCC37AD74D836953FCD826766AB3A553FCEB7E152B7BD8B
+3FCFECCA6EAA1B663FD091A97CFC80EC3FD12DCE6A5CC82C3FD1CAAA8FC9E6823FD267012FD9764B
+3FD3034BCA35324C3FD39F85F9DE4F893FD43B91E3FFC5653FD4D77830A549FA3FD571DA6C0B7B5B
+3FD60BAD4B679FF33FD6A5A59158643E3FD740ED3A84229E3FD7DD4B3EC916EE3FD87B33F8A329A8
+3FD91ABCE4F2818E3FD9B69D39BA5F073FDA53B66137194A3FDAF3C1E2D84B5C3FDB9C01513227E5
+3FDC4848D4F95FBD3FDCF9765634442E3FDDAE1A38F8910F3FDE651AF672907A3FDF1F8E6E585A77
+3FDFDE12B43199A03FE053F36C67B9453FE0AF9D60C6EC393FE10AAAF84A344E3FE163CE8001F05A
+3FE1BC605721056D3FE21601EC364A813FE26AA1ECDF2CE53FE2BE177120C93F3FE3115DD08E758E
+3FE363681E5ABD7A3FE3B3FCCC8DDF8E3FE403CB4656508C3FE4527E3941F2E53FE4A084467ED875
+3FE4EE413EDAD2ED3FE53C1921BC16673FE58A25F3BCE7EC3FE5D8239A701A583FE625D6C0584584
+3FE673007CB29DCE3FE6C01A0E1752793FE70DED40363A4B3FE75BEF6E2725843FE7A9C740A0B7A2
+3FE7F736B4519D013FE844B81517281F3FE8928660EB6CA63FE8E05AC83726F63FE92E429F8F9B5D
+3FE97C279D263CEC3FE9CAA5410774663FEA18E72FD3B3A73FEA66D72503D2803FEAB483BCA0BA17
+3FEB02AE7A5904F73FEB4ED01FC25B103FEB9B7B7E7B75A53FEBE820A9934B003FEC38026A14479B
+3FEC8816A6FA89DB3FECD977684AB3223FED2BD8520418843FED80BDBCC72A333FEDD4CCA2B738B4
+3FEE2C1E1DB3E3953FEE8400888CE6BC3FEEE1D31136F1DE3FEF4010575422D63FEFA0311EC01731
+3FF0000000000000
+
+ 53F9A8F2A5EAC69C83FA9861B3BF9DF333FB3519C0BF70D973FB9A8CD378E3915
+3FBEF3C3DCFA00543FC1C09F7AB7782C3FC3D3ADB8999C433FC5B97E419E29E43FC77B4AD810B098
+3FC9200FA910B5EF3FCAA8726712178B3FCC184D009820E53FCD74E8426918B03FCEC0BCB22295A5
+3FCFFC767EC6346A3FD09408508D38F53FD123566081FEB43FD1AD6327D146CD3FD232CDB4D1529D
+3FD2B317F661427E3FD32EDCD847D9E83FD3A7A6CE390D0B3FD41EADB9DADA553FD48E73689C8711
+3FD4F9102AA0B8E23FD560823A97F9393FD5C9314FB848793FD6327A7641A4563FD698222842E147
+3FD6FBC407A6BE623FD75D8DEE7772DA3FD7BD9809B40DF93FD81C0966383B3F3FD87906F9AD158C
+3FD8D498A2E21C4E3FD92EDF6B7BAB933FD987AD65A8B7443FD9DF7EBBC1AFFA3FDA36458C6F2D13
+3FDA8BECF6DDD9233FDAE0651C59936B3FDB339870AE75173FDB85FDEBD08DC43FDBD795C363665F
+3FDC28AA2D5E31723FDC7909EB847C6C3FDCC8F91835C9313FDD182AA7172C503FDD66C35F63F619
+3FDDB4FCDFC5BF413FDE02BF8F402E7A3FDE503E87794D143FDE9D4FD0524C933FDEE9B9B9507B21
+3FDF360732B9879A3FDF822AA4A2C10E3FDFCE647E5935CB3FE00D29C8ADECA63FE0331770C27960
+3FE058FBB663D2093FE07EE6E860A0253FE0A4D5AC7B25543FE0CAD8F81DCE033FE0F0EF627F8862
+3FE11720DE4E8A8D3FE13D84F07597493FE163FC82B991103FE18AAB2E20040A3FE1B1A4AE0CA8A6
+3FE1D8E2662649A03FE2008DAEDE94A23FE2287F3DA118E63FE250BE313CDC2E3FE27958FAE14739
+3FE2A2364BA876B43FE2CBA2F9B3F8073FE2F5B4F2DDD48A3FE3208965898FCD3FE34C1ACE23DF0E
+3FE37874519AB71B3FE3A5B51AD1CE513FE3D3F23D86C9DA3FE4035B62B044A73FE4341E9ED11B65
+3FE46682CBF4D2DE3FE49A76731AA9613FE4D02DED0788273FE507EE7D56838C3FE542728CBDC54C
+3FE5804288790FAC3FE5C21CF35D19F03FE608935E0AC1063FE6552688CE088B3FE6A961A406E2D1
+3FE7086BBD6711A13FE7773FA43078553FE80114097363C83FE8B1D1A01C771F3FEA5E095B3E8508
+3FF0000000000000
+
+ 63FC057EF34C0AD643FC589B2968987A83FC84AFDB72216543FCA91CDAAA6E686
+3FCC7437797CBD843FCE14163B951F2A3FCF8D9A37AFE5713FD0714D7A11F75F3FD112C06E495218
+3FD1A7A30C8C153A3FD2316D03CBB8083FD2B47B0BCB21133FD32FA7B50882B83FD3A892277F692F
+3FD41D1E4ECA03803FD48F139B8ABCDF3FD4FDBCD762CF883FD568C71DB1CC383FD5D1AE650710CE
+3FD6378DBD208EA23FD69B0C76FE06ED3FD6FC90A442B2F83FD75C9742247B263FD7BAF34133186E
+3FD8175912323E923FD872C38B404FC83FD8CC0BDA8AA3893FD92700A730C0743FD97995E5E56ADD
+3FD9CCD12AA7E0163FDA1DF4C37E983C3FDA6FD151708B533FDAC0F2753CA2043FDB0FCA506D2912
+3FDB5E457717A8153FDBAF9380C290EC3FDC001AEFC0FB4A3FDC508C3912C5F03FDCA05593BE6C6E
+3FDCEFBF4177588E3FDD3E8B61F40EC83FDD8D5E8C107D793FDDDAC94F9D82283FDE2893C52F4DC4
+3FDE75F3C0A8DD203FDEC47CF6C3779E3FDF1294C61DF1ED3FDF60A6D15CC0C43FDFAEB8328062B9
+3FDFFCBE07B5CDCB3FE02496B345490E3FE04ADF5E97BFD63FE070ECC4F51C6E3FE09795FCC0950F
+3FE0BE63F58C2AF63FE0E5537B723D5A3FE10C5678C0EC173FE1338F652C8A043FE15AF893DBC55C
+3FE18254D6C36A113FE1A9D5973F7BDD3FE1D1AC3190384C3FE1F9EA85D066473FE222978F184886
+3FE24B69F3D49DEC3FE2738F1CC6260D3FE29C1AE08321093FE2C4C6A90174A33FE2EF16289967F7
+3FE3188514D1745E3FE3423D5B8D9CFE3FE36C3EECF715BB3FE397D30FC7AFEE3FE3C3F4D100D734
+3FE3F16C9FB8E6EF3FE41FA61F897AF93FE44E7F8EB2FE543FE47EF47DCD90E83FE4B14AA6F48CC6
+3FE4DF872A3B6B453FE512B4848F92703FE543DFD617557E3FE578AD82C4625E3FE5B2DD344DE19C
+3FE5EA70D156D82C3FE62599282BDEA03FE662C3FB1F76673FE6A22617B7FCC83FE6E4B90C3ECF1A
+3FE72B4EB708FB293FE7762FFA5757653FE7C615EA8B3E7B3FE81BEEBCF98CC73FE879B139C77734
+3FE8E2C681B1410B3FE958E697E6B1B13FE9EAECE7EA24283FEA97D74A0E966D3FEBD910AD225EEC
+3FF0000000000000
+
+ 73F847AE147AE14803F947AE147AE14803F9EB851EB851EC03FA47AE147AE1480
+3FA99999999999A03FAEB851EB851EC03FB1EB851EB851F03FB47AE147AE14803FB70A3D70A3D710
+3FB99999999999A03FBC28F5C28F5C303FBEB851EB851EC03FC0A3D70A3D70A83FC1EB851EB851F0
+3FC33333333333383FC47AE147AE14803FC5C28F5C28F5C83FC70A3D70A3D7103FC851EB851EB858
+3FC99999999999A03FCAE147AE147AE83FCC28F5C28F5C303FCD70A3D70A3D783FCEB851EB851EC0
+3FD00000000000043FD0A3D70A3D70A83FD147AE147AE14C3FD1EB851EB851F03FD28F5C28F5C294
+3FD33333333333383FD3D70A3D70A3DC3FD47AE147AE14803FD51EB851EB85243FD5C28F5C28F5C8
+3FD666666666666C3FD70A3D70A3D7103FD7AE147AE147B43FD851EB851EB8583FD8F5C28F5C28FC
+3FD99999999999A03FDA3D70A3D70A443FDAE147AE147AE83FDB851EB851EB8C3FDC28F5C28F5C30
+3FDCCCCCCCCCCCD43FDD70A3D70A3D783FDE147AE147AE1C3FDEB851EB851EC03FDF5C28F5C28F64
+3FE00000000000043FE051EB851EB8563FE0A3D70A3D70A83FE0F5C28F5C28FA3FE147AE147AE14C
+3FE199999999999E3FE1EB851EB851F03FE23D70A3D70A423FE28F5C28F5C2943FE2E147AE147AE6
+3FE33333333333383FE3851EB851EB8A3FE3D70A3D70A3DC3FE428F5C28F5C2E3FE47AE147AE1480
+3FE4CCCCCCCCCCD23FE51EB851EB85243FE570A3D70A3D763FE5C28F5C28F5C83FE6147AE147AE1A
+3FE666666666666C3FE6B851EB851EBE3FE70A3D70A3D7103FE75C28F5C28F623FE7AE147AE147B4
+3FE80000000000063FE851EB851EB8583FE8A3D70A3D70AA3FE8F5C28F5C28FC3FE947AE147AE14E
+3FE99999999999A03FE9EB851EB851F23FEA3D70A3D70A443FEA8F5C28F5C2963FEAE147AE147AE8
+3FEB33333333333A3FEB851EB851EB8C3FEBD70A3D70A3DE3FEC28F5C28F5C303FEC7AE147AE1482
+3FECCCCCCCCCCCD43FED1EB851EB85263FED70A3D70A3D773FEDC28F5C28F5C93FEE147AE147AE1B
+3FEE66666666666D3FEEB851EB851EBF3FEF0A3D70A3D7113FEF5C28F5C28F633FEFAE147AE147B5
+3FF0000000000000
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2013_I1208923/fnl2332d.1jet.LO-fastwarm.run
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2013_I1208923/fnl2332d.1jet.LO-fastwarm.run (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2013_I1208923/fnl2332d.1jet.LO-fastwarm.run (revision 1772)
@@ -0,0 +1,174 @@
+NNLOJET_RUNCARD
+LO-7TeV ! Job name id, must be less than 10 characters
+1jet ! Process name
+@EVENTS@ ! Number of events
+1 ! Number of iterations
+@SEED@ ! Seed number
+.false. ! Warmup
+.true. ! Production
+CT14nnlo ! PDF set
+0 ! PDF member
+antikt ! Jet algorithm, accepts 'kt', 'cam' or 'antikt'
+0.7d0 ! Rcut
+.false. ! exclusive
+0 ! Heavy particle decay type
+.1e-7 ! Technical cutoff y0
+.false. ! angular averaging of the phase space, default to true
+2 ! Virtual Integration method, use 2 if you're not sure
+all ! RR a/b region flag. Accepts 'a','b' or 'all'.
+0 ! set to zero for MC, 2 for point test
+.false. ! print max weight flag
+.true. ! momentum mapping and PDF storage flag
+.true. ! colour sampling flag
+.false. ! explicit pole check flag, stops integration when set to true
+
+PHYSICAL_PARAMETERS
+7000d0 ! roots
+125d0 ! Mass of the Higgs Boson
+0.004029643852d0 ! Width of the Higgs Boson
+91.1876d0 ! Mass of the Z Boson
+2.4952d0 ! Width of the Z Boson
+80.398d0 ! Mass of the W Boson
+2.1054d0 ! Width of the W Boson
+173.2d0 ! Mass of the Top Quark
+1.41d0 ! Width of the Top Quark
+4.18d0 ! Mass of the Bottom Quark
+0d0 ! Width of the Bottom Quark
+1.275d0 ! Mass of the Charm Quark
+0d0 ! Width of the Charm Quark
+
+UNIT_PHASE
+
+SELECTORS
+ select jets_pt min = 114 max = 2116
+ select jets_abs_y max = 2.5
+ select njets min = 1
+END_SELECTORS
+
+
+
+HISTOGRAMS
+
+COMPOSITE > xptj0_y1 [114.0,133.0,153.0,174.0,196.0,220.0,245.0,272.0,300.0,330.0,362.0,395.0,430.0,468.0,507.0,548.0,592.0,638.0,686.0,737.0,790.0,846.0,905.0,967.0,1032.0,1101.0,1172.0,1248.0,1327.0,1410.0,1497.0,1588.0,1784.0,2116.0] grid=ptji_incl_y1.fast
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y2 [114.0,133.0,153.0,174.0,196.0,220.0,245.0,272.0,300.0,330.0,362.0,395.0,430.0,468.0,507.0,548.0,592.0,638.0,686.0,737.0,790.0,846.0,905.0,967.0,1032.0,1101.0,1172.0,1248.0,1327.0,1410.0,1784.0] grid=ptji_incl_y2.fast
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y3 [114.0,133.0,153.0,174.0,196.0,220.0,245.0,272.0,300.0,330.0,362.0,395.0,430.0,468.0,507.0,548.0,592.0,638.0,686.0,737.0,790.0,846.0,905.0,967.0,1032.0,1101.0,1172.0,1684.0] grid=ptji_incl_y3.fast
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y4 [114.0,133.0,153.0,174.0,196.0,220.0,245.0,272.0,300.0,330.0,362.0,395.0,430.0,468.0,507.0,548.0,592.0,638.0,686.0,737.0,790.0,846.0,905.0,967.0,1248.0] grid=ptji_incl_y4.fast
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y5 [114.0,133.0,153.0,174.0,196.0,220.0,245.0,272.0,300.0,330.0,362.0,395.0,430.0,468.0,507.0,548.0,592.0,638.0,686.0,905.0] grid=ptji_incl_y5.fast
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+END_HISTOGRAMS
+
+SCALES
+ muf = ptj1 mur = ptj1
+ muf = 2.718281828 mur = 2.718281828
+ muf = 4.48168907 mur = 4.48168907
+ muf = 4.48168907 mur = 2.718281828
+ muf = 2.718281828 mur = 4.48168907
+ muf = 12.18249396 mur = 2.718281828
+ muf = 2.718281828 mur = 12.18249396
+END_SCALES
+
+!####### SYNTAX ######################
+!##
+!## REWEIGHT {observable-name}**{val_power}
+!##
+!#####################################
+
+! REWEIGHT ht_part**4
+! REWEIGHT ht_part**1.4 !# DB
+REWEIGHT ht_part**6.5 !# KR
+
+CHANNELS
+ LO
+END_CHANNELS
+
+SETUP
+END_SETUP
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2013_I1208923/fnl2332d.1jet.VV-fastprod.conf
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2013_I1208923/fnl2332d.1jet.VV-fastprod.conf (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2013_I1208923/fnl2332d.1jet.VV-fastprod.conf (revision 1772)
@@ -0,0 +1,22 @@
+[global]
+include = nnlojet-gc.conf
+
+[jobs]
+;jobs = 10 ; Max. # of jobs (truncated to module maximum), D=mod
+;wall time = 3:00 ; Requested wall time in hh[:mm[:ss]] (also used for proxy lifetime)
+
+[parameters] ; This section defines the parameter space
+repeat = 1 ; How many times each parameter space point should be sampled
+parameters = ( SEED , EVENTS )
+SEED = range( 70000, 70100 )
+SEED type = expr
+;EVENTS = 800000
+EVENTS = 12000000
+
+[UserTask]
+executable = fnlo-run-nnlojet.csh
+arguments = fnl2332d 1jet VV fastprod
+subst files = fnl2332d.1jet.VV-fastprod.run
+; NNLOJET production run
+input files = fnlo-run-nnlojet.pl fastNLO_v23_source_nnlojet_cvmfs.csh fnl2332d.1jet.VV-fastprod.run 1jet.VV-7TeV.y.1e-7.vBa jet.VV-7TeV.ptji_incl_y1.wrm jet.VV-7TeV.ptji_incl_y2.wrm jet.VV-7TeV.ptji_incl_y3.wrm jet.VV-7TeV.ptji_incl_y4.wrm jet.VV-7TeV.ptji_incl_y5.wrm jet.7TeV.ptji_incl_y1.wrm jet.7TeV.ptji_incl_y2.wrm jet.7TeV.ptji_incl_y3.wrm jet.7TeV.ptji_incl_y4.wrm jet.7TeV.ptji_incl_y5.wrm
+output files = fnl2332d.1jet.VV-fastprod.tar.gz
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2013_I1208923/1jet.VV-7TeV.y.1e-7.vBa
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2013_I1208923/1jet.VV-7TeV.y.1e-7.vBa (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2013_I1208923/1jet.VV-7TeV.y.1e-7.vBa (revision 1772)
@@ -0,0 +1,132 @@
+
+ 13FA2EF6619F668F03FAF6E906586AEA73FB4396341AF32D23FB88D412532E019
+3FBC8AC289F6B79F3FC014AC70FEF6413FC1234F64C6B94B3FC24FC6665630753FC3761AC2A138F3
+3FC481C4634884253FC5E8668DFA9A173FC7970889B0AF653FC92A6D362DFA303FCAB7F72DF95643
+3FCC40BD9226377A3FCDC6EC41ED09B83FCF4B21C2A1A5ED3FD066DDDB44C6033FD126AB7FBFA160
+3FD1E623F66358B93FD2A49AFA42EAB13FD362E7F687938C3FD420917FED01273FD4DE1557056BB3
+3FD59B0AC3741F193FD657A7288CC0133FD713C70815CAAD3FD7CF6F13E0451C3FD88A65568C78AE
+3FD94473E230AB013FD9FD939ECF03A73FDAB5585D3DD8D53FDB6B92552D091A3FDC200CE7B69A2B
+3FDCD24C536550533FDD825CE00C9A7D3FDE3006A88A89743FDEDB4AFDD0C2873FDF83EA505E112C
+3FE014F2BB466F5B3FE066A8812356853FE0B725687532A13FE1066CE8CAF3E93FE15466ABDBEA6E
+3FE1A126CA8FEF0B3FE1EC8B157102193FE2366CE2E493B73FE27F0C949F0E983FE2C686292CC47F
+3FE30CF3D50C30D83FE3524265C294333FE3969753C594C43FE3D9CBAD18A2A83FE41C1E492BC2E9
+3FE45D762EB90F973FE49DD9222A051A3FE4DD6C16199B623FE51C0FD847E6E33FE559E6198283DE
+3FE596FDFAE8F95B3FE5D3886961F70D3FE60F87B42FAE5A3FE64AE9F8C297193FE685CDD97D3670
+3FE6C0327FD3402B3FE6FA17D1F124573FE7338736D4F5F63FE76C911C6614E23FE7A53C3ECA05E7
+3FE7DD989B780FDE3FE815C74067AD823FE84DCBC5F68BB83FE8857C5EFED3783FE8BCFF81172C21
+3FE8F46162D14F763FE92BC9A24E833B3FE96333A9D508EC3FE99A9EB99C9AC03FE9D22E70FF5128
+3FEA09E5DD2225C93FEA41D5E69EC95C3FEA7A254FD6AE103FEAB2E13D002D793FEAEC23D84110A6
+3FEB26041635D73B3FEB608D21A279E83FEB9BF0DF9F55273FEBD854D27D4C8C3FEC15D8C2A3D34F
+3FEC54C2704C941F3FEC956ACA912DBE3FECD7E69593E99D3FED1CD06D035F473FED64D9BAAE4E2E
+3FEDB065D01929BF3FEE0161A8CDDE063FEE5B275AD09EBA3FEEB7C302D4D6533FEF3FEC1021EC23
+3FF0000000000000
+
+ 23F429EE704D6D61C3F51FF5D197801163F596F1E0A44C5F63F6091F4855A9423
+3F6463C4D3ED28AF3F6838C176906B5C3F6C16034F94A2123F70003947CDBD753F71FB48B383BA82
+3F73FE4BDD44FEA73F7609B4A0EE98AC3F781E478D13E15C3F7A3B6D0D1324B53F7C61B2A84D832D
+3F7E91F01AF794533F80660F23A1E6293F81883E635F5B913F82B039774FE6373F83ECA951C5C469
+3F84E1CCA63FECDF3F85AE9A96D257AF3F8684515B1CF37D3F875BD102A263453F881F6F835A02D8
+3F89630E5C2497F23F8AB5542E9F9C5C3F8C0ADCCBE151C93F8D6753EA9524DC3F8ECA926BAF7002
+3F901A5C1BE162393F90D333ACEF69A93F918F97150FCAD03F924FE922C3E6263F931461D943835A
+3F93DC87F6CE60233F94A928C583F8F73F957A57D68BAA223F96502161DC26F43F972AAF3DCC6C10
+3F980A5DEF0DFE1F3F98EF1F22DBDD0F3F99D9379F7992553F9AC83839B6CEA93F9BBCB8E275ABF6
+3F9CB750D27A1BCB3F9DB63C5F1B0F1E3F9EBBD8A5B7AE4D3F9FC9656A60559F3FA06DEC77ECF53B
+3FA0FAFC97B6A9913FA18B6564ECE51D3FA21F782FFE70213FA2B75457D673073FA3535797643E80
+3FA3F3298C4C4B903FA49712D4AD60423FA540A2A6191EC23FA5EE59BB4A11D03FA6A158B6C4A831
+3FA7590DF7D9E4123FA816A6F24AB9F43FA8D9573BA887743FA9A290A0FB6E4C3FAA72945E5C92A8
+3FAB48139E61B3403FAC24F174735B253FAD09953395C8083FADF55BB7B770123FAEEA860BF25033
+3FAFE8766F86ED653FB0778E22B75D8E3FB100DDF1E60B883FB18E3FD3A629903FB2227FAA769112
+3FB2BD505FCCB6523FB35EEE274ED6A03FB407BD508AE00D3FB4B92420DFE4B33FB573B093FAC977
+3FB637CD0E0A51D13FB7070057F6A5233FB7E24DCF7AD8FE3FB8CAB2970B91943FB9C24EA3B0FABB
+3FBACB4E578FC4413FBBE7FCD69D63E93FBD1B5EE4C302F93FBE68E49963FFAE3FBFD53A74267157
+3FC0B3739CACF3BB3FC193697EB0987B3FC2905F54802D503FC3B2D0B5FCED263FC506660AD61E07
+3FC6A173E315F1AA3FC8A57426F0CB873FCB5E2C10AA56C23FCFB0B4493FDC7C3FD542D04E2B9800
+3FF0000000000000
+
+ 33FBECDEA21E70F713FC479ADA9CE45543FC747596F3E5FA73FC98E09190E2FCC
+3FCB776F52C401DE3FCD22833C6A24373FCEA2D4730AF36E3FD0018043064D653FD0A48DF54E7131
+3FD13D3254A367C93FD1CD6D9F5D11553FD256B072F0052D3FD2DA05C8E2EA8D3FD3582BBA2292BF
+3FD3D1B1FB7BC5F23FD4470FBAFBF15D3FD4B8C921510CF83FD52772F4E2D9DF3FD59356FCE46D35
+3FD5FCB31E9808F83FD663C21E3C5E3A3FD6C8A15B5EB1763FD72B8E0B045F2D3FD78CB6F0D6DB36
+3FD7EC37150F6D053FD84A4DFDEDB0BD3FD8A6F08A0956553FD9021D945B02513FD95C6912727D06
+3FD9B59AFC7378F23FDA0DAA3B1088093FDA64DB39A777EA3FDABBCE469060CC3FDB11C94228E114
+3FDB66F1891C62F33FDBBBBABE80FDC53FDC0FCF6F2F0DA53FDC638646854F0C3FDCB6BB4F0EEC1A
+3FDD0979330D055B3FDD5BB5D1DC1EC93FDDAD9AADEEDD1B3FDDFF42F43CD9413FDE50AEFB3AFD82
+3FDEA20D1509392C3FDEF341FDA568603FDF446694D53FCB3FDF956242CEF5743FDFE66260FDC6C2
+3FE01B9D64693F813FE044338BD4ADD53FE06CAAFE64DBD43FE095366AAA8B453FE0BDE697E9E6A6
+3FE0E6B499D74F3E3FE10FABED5A30ED3FE138D8376C34A73FE1622AE5902FCC3FE18B95BADB4067
+3FE1B52EF57B4DBA3FE1DF11181C9F7A3FE209438AD95FCD3FE233BE97C4E6483FE25E90AE97EA82
+3FE289B4F9D9C6123FE2B52F174C77563FE2E11CDDAB53C73FE30DB08EA9E3C63FE33AC2213131AE
+3FE3683C823F45A63FE3963FB8F6F84F3FE3C58C702307FD3FE3F40D421E365A3FE4127B6CD3DAF1
+3FE433135C9D65873FE454332BA9924B3FE474AC39A91BBA3FE49B6FD749883A3FE4D14A491697DA
+3FE505381A0EE3F33FE53A7873AD63F93FE570F0357FBD113FE5A8D474B2938D3FE5E27AA7F56916
+3FE61E22DD60ED023FE65BB0DD63F3903FE69B822F7EBA1A3FE6DDD47E0ACBF73FE7232DCB38F61C
+3FE76C16F86A806B3FE7B9224B4C8EB73FE80B244A76390C3FE8636F9D382B0F3FE8C3C7AFFF1DE7
+3FE92EAE51531DFB3FE9A86CB34E81E33FEA398ACFA2D2903FEAEAAF39C74DC03FEC25BF17DD99D3
+3FF0000000000000
+
+ 43F8EA849F826C8483F9EA7C07E7668363FA6F720D072C0163FAEA9304327EFB2
+3FB319D2EC359B043FB6E86E490ABBD13FBAB24B2DD5B8CA3FBE7C1C1AA01E773FC1232FB1A18A50
+3FC307847BB3D3603FC4EADF60D8C4573FC6CF4BBB879FF63FC8AFA757D2029B3FCA8F56020AFF03
+3FCC71CE46758BAF3FCE52DB85820B903FD018BA0B5E50423FD107661F365C4E3FD1F611AE4C8FF8
+3FD2E4BF9E9C744A3FD3D29730F04CE83FD4C02CDC68B95C3FD5ADF0A21C8E0D3FD69AC70E9563EF
+3FD786B24E2ED9003FD872857991C6AC3FD95DFAD7FDC77C3FDA488831A7DD533FDB3259F1E2F0C6
+3FDC1B58A79EF2A03FDD038C9BA26CAE3FDDEB0C7BEDFD683FDED183749EEA053FDFB6EE722AAF3D
+3FE04D9E59E3FD8E3FE0BEF4389A70833FE130860A7B3E6E3FE1A2C47C63F1AE3FE1F6E2E7F7D93A
+3FE23F035F2539E03FE2899CDE7C946C3FE2D39FB164A1533FE31CA2158DD4C73FE3897806004494
+3FE3F66EF0FB51EE3FE4608FBAE5180D3FE4C9C9CFE90B1C3FE53203EC45F9143FE598CCC5C0ED8D
+3FE5FE27A4586DB03FE6620DD51E6C5C3FE6C46DDBFAE7DE3FE725AACA9C2FB83FE7851BE09EE23C
+3FE7E2EF8518FCA53FE83F03700241A53FE899897F7B44023FE8F222F6059C173FE948BEDE66FB24
+3FE99D551B6DAA163FE9F006AB8CD3BF3FEA40AD62DF5CE13FEA8F5A1FCEB2C03FEADBEAA1F1A56E
+3FEB263E0C1E3AC73FEB6E4E9784A0793FEBB404578EEE953FEBF77EA8DBFA133FEC38ACB999616F
+3FEC778555F76C553FECB3F6B72E22323FECEE234316A2073FED25FB95F519013FED5B6E13D7AAEF
+3FED8E874DEA08503FEDBF4107D99B5D3FEDEDA2C5FAF82E3FEE19C4B58554063FEE43CB9B6C3133
+3FEE6BBCBC3A71713FEE9189E802DF653FEEB53B76C200E33FEED6DA28BD4F973FEEF6765B9F36F0
+3FEF141F01E589343FEF2FE23E87328D3FEF49C9525923FE3FEF61E8F88743243FEF783FE1976202
+3FEF8CDDDB5651513FEF9FDD498D56423FEFB12DFC7DD9793FEFC0C8723651373FEFCEEA3B1F1F9A
+3FEFDB5354B2BBBF3FEFE611271CEF0B3FEFEF8097D16CF73FEFF7340D8604143FEFFC149C7B0D98
+3FF0000000000000
+
+ 53F8F4B10FC517A063F9E8C3CEC954FE83FA70BCA7A7C23ED3FAEA5580DE4F93B
+3FB323E2EA1CF5393FB6F19F5CF435683FBABFA9203AE8633FBE8890673AFB793FC128678BFEA804
+3FC30C0E2DBC31463FC4EF5F26DEEA7A3FC6D1F2DA1F26CF3FC8B45A74F0B9933FCA9573F9241974
+3FCC75613D8ECF173FCE54600EA2BE653FD0197937ABC6A13FD108378631FCA63FD1F5F643055B73
+3FD2E333ACFA01DB3FD3D0C9B6211AE53FD4BDF745A250CD3FD5AA423F41037A3FD6964CB011900F
+3FD7821D12B23FC53FD86D436DA3D94A3FD95745DEFAF0723FDA40789A1FF7F33FDB28C7036D388C
+3FDC0FF292C99C1E3FDCF65E6D9C0D323FDDDBE50CAF46E63FDEC084610B390C3FDFA3B570A69D72
+3FE042FC25270BF03FE0B39DD06E49113FE12377F67C49C03FE192B7ACF0C8163FE2013C24BC5839
+3FE26F0CEF376CBA3FE2DBD4FF2CA4CC3FE3479003FEB1663FE3B24EFA4AA3023FE41BD7CB67EDEB
+3FE484845F09E5363FE4EC282C94F98E3FE5528E5D7A6C5D3FE5B78B2B16AF593FE61B3C503E1FFF
+3FE67D9DBB3D442C3FE6DE732C09E8B13FE73DD2DA8BFB143FE79B90E7C3FF4F3FE7F7C77F9BCD1A
+3FE8525DBA75489F3FE8AB6DED8739BF3FE902D3D657D4923FE95830539C62793FE9AB7E941B4F4A
+3FE9FCCACF3AE70F3FEA4C186EE51DA93FEA996BD517D6E23FEAE4B2B8117CB73FEB2DEADD6EB346
+3FEB750EFA646E813FEBB9FCFAA8D65E3FEBFCAB23AFBFD63FEC3D2120135FCB3FEC7B5A20262940
+3FECB7555F026E7F3FECF1116A1208853FED287EE9DDED393FED5DAE3D2D8F3A3FED9097DD08AA06
+3FEDC13818A8CEE93FEDEF9461815D793FEE1BC8B90B43F83FEE45E1F98D8D103FEE6DF90452D909
+3FEE94A3EA7FA8D03FEEB59FF9574A8B3FEECAA9BBD0D8613FEEE0FF6D529D5F3FEEF68C8E5E96F5
+3FEF0A4F0AB2827E3FEF239899F462063FEF3FF189D803A73FEF5945C5BE28CB3FEF70C2372A3509
+3FEF866D1C5E61A73FEF9A62527202713FEFACA4CA325F013FEFBD25207225E63FEFCBEBA036E978
+3FEFD92F879E03AB3FEFE48AF1B27CFE3FEFEE7F1093D3923FEFF6BAD9D008083FEFFBD97869E605
+3FF0000000000000
+
+ 63F847AE147AE14803F947AE147AE14803F9EB851EB851EC03FA47AE147AE1480
+3FA99999999999A03FAEB851EB851EC03FB1EB851EB851F03FB47AE147AE14803FB70A3D70A3D710
+3FB99999999999A03FBC28F5C28F5C303FBEB851EB851EC03FC0A3D70A3D70A83FC1EB851EB851F0
+3FC33333333333383FC47AE147AE14803FC5C28F5C28F5C83FC70A3D70A3D7103FC851EB851EB858
+3FC99999999999A03FCAE147AE147AE83FCC28F5C28F5C303FCD70A3D70A3D783FCEB851EB851EC0
+3FD00000000000043FD0A3D70A3D70A83FD147AE147AE14C3FD1EB851EB851F03FD28F5C28F5C294
+3FD33333333333383FD3D70A3D70A3DC3FD47AE147AE14803FD51EB851EB85243FD5C28F5C28F5C8
+3FD666666666666C3FD70A3D70A3D7103FD7AE147AE147B43FD851EB851EB8583FD8F5C28F5C28FC
+3FD99999999999A03FDA3D70A3D70A443FDAE147AE147AE83FDB851EB851EB8C3FDC28F5C28F5C30
+3FDCCCCCCCCCCCD43FDD70A3D70A3D783FDE147AE147AE1C3FDEB851EB851EC03FDF5C28F5C28F64
+3FE00000000000043FE051EB851EB8563FE0A3D70A3D70A83FE0F5C28F5C28FA3FE147AE147AE14C
+3FE199999999999E3FE1EB851EB851F03FE23D70A3D70A423FE28F5C28F5C2943FE2E147AE147AE6
+3FE33333333333383FE3851EB851EB8A3FE3D70A3D70A3DC3FE428F5C28F5C2E3FE47AE147AE1480
+3FE4CCCCCCCCCCD23FE51EB851EB85243FE570A3D70A3D763FE5C28F5C28F5C83FE6147AE147AE1A
+3FE666666666666C3FE6B851EB851EBE3FE70A3D70A3D7103FE75C28F5C28F623FE7AE147AE147B4
+3FE80000000000063FE851EB851EB8583FE8A3D70A3D70AA3FE8F5C28F5C28FC3FE947AE147AE14E
+3FE99999999999A03FE9EB851EB851F23FEA3D70A3D70A443FEA8F5C28F5C2963FEAE147AE147AE8
+3FEB33333333333A3FEB851EB851EB8C3FEBD70A3D70A3DE3FEC28F5C28F5C303FEC7AE147AE1482
+3FECCCCCCCCCCCD43FED1EB851EB85263FED70A3D70A3D773FEDC28F5C28F5C93FEE147AE147AE1B
+3FEE66666666666D3FEEB851EB851EBF3FEF0A3D70A3D7113FEF5C28F5C28F633FEFAE147AE147B5
+3FF0000000000000
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2013_I1208923/fnl2332d.1jet.RRb-fastprod.run
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2013_I1208923/fnl2332d.1jet.RRb-fastprod.run (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2013_I1208923/fnl2332d.1jet.RRb-fastprod.run (revision 1772)
@@ -0,0 +1,174 @@
+NNLOJET_RUNCARD
+RRb-7TeV ! Job name id, must be less than 10 characters
+1jet ! Process name
+@EVENTS@ ! Number of events
+1 ! Number of iterations
+@SEED@ ! Seed number
+.false. ! Warmup
+.true. ! Production
+CT14nnlo ! PDF set
+0 ! PDF member
+antikt ! Jet algorithm, accepts 'kt', 'cam' or 'antikt'
+0.7d0 ! Rcut
+.false. ! exclusive
+0 ! Heavy particle decay type
+.1e-7 ! Technical cutoff y0
+.false. ! angular averaging of the phase space, default to true
+2 ! Virtual Integration method, use 2 if you're not sure
+b ! RR a/b region flag. Accepts 'a','b' or 'all'.
+0 ! set to zero for MC, 2 for point test
+.false. ! print max weight flag
+.true. ! momentum mapping and PDF storage flag
+.true. ! colour sampling flag
+.false. ! explicit pole check flag, stops integration when set to true
+
+PHYSICAL_PARAMETERS
+7000d0 ! roots
+125d0 ! Mass of the Higgs Boson
+0.004029643852d0 ! Width of the Higgs Boson
+91.1876d0 ! Mass of the Z Boson
+2.4952d0 ! Width of the Z Boson
+80.398d0 ! Mass of the W Boson
+2.1054d0 ! Width of the W Boson
+173.2d0 ! Mass of the Top Quark
+1.41d0 ! Width of the Top Quark
+4.18d0 ! Mass of the Bottom Quark
+0d0 ! Width of the Bottom Quark
+1.275d0 ! Mass of the Charm Quark
+0d0 ! Width of the Charm Quark
+
+! UNIT_PHASE
+
+SELECTORS
+ select jets_pt min = 114 max = 2116
+ select jets_abs_y max = 2.5
+ select njets min = 1
+END_SELECTORS
+
+
+
+HISTOGRAMS
+
+COMPOSITE > xptj0_y1 [114.0,133.0,153.0,174.0,196.0,220.0,245.0,272.0,300.0,330.0,362.0,395.0,430.0,468.0,507.0,548.0,592.0,638.0,686.0,737.0,790.0,846.0,905.0,967.0,1032.0,1101.0,1172.0,1248.0,1327.0,1410.0,1497.0,1588.0,1784.0,2116.0] grid=ptji_incl_y1.fast
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y2 [114.0,133.0,153.0,174.0,196.0,220.0,245.0,272.0,300.0,330.0,362.0,395.0,430.0,468.0,507.0,548.0,592.0,638.0,686.0,737.0,790.0,846.0,905.0,967.0,1032.0,1101.0,1172.0,1248.0,1327.0,1410.0,1784.0] grid=ptji_incl_y2.fast
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y3 [114.0,133.0,153.0,174.0,196.0,220.0,245.0,272.0,300.0,330.0,362.0,395.0,430.0,468.0,507.0,548.0,592.0,638.0,686.0,737.0,790.0,846.0,905.0,967.0,1032.0,1101.0,1172.0,1684.0] grid=ptji_incl_y3.fast
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y4 [114.0,133.0,153.0,174.0,196.0,220.0,245.0,272.0,300.0,330.0,362.0,395.0,430.0,468.0,507.0,548.0,592.0,638.0,686.0,737.0,790.0,846.0,905.0,967.0,1248.0] grid=ptji_incl_y4.fast
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y5 [114.0,133.0,153.0,174.0,196.0,220.0,245.0,272.0,300.0,330.0,362.0,395.0,430.0,468.0,507.0,548.0,592.0,638.0,686.0,905.0] grid=ptji_incl_y5.fast
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+END_HISTOGRAMS
+
+SCALES
+ muf = ptj1 mur = ptj1
+ muf = 2.718281828 mur = 2.718281828
+ muf = 4.48168907 mur = 4.48168907
+ muf = 4.48168907 mur = 2.718281828
+ muf = 2.718281828 mur = 4.48168907
+ muf = 12.18249396 mur = 2.718281828
+ muf = 2.718281828 mur = 12.18249396
+END_SCALES
+
+!####### SYNTAX ######################
+!##
+!## REWEIGHT {observable-name}**{val_power}
+!##
+!#####################################
+
+! REWEIGHT ht_part**4
+! REWEIGHT ht_part**1.4 !# DB
+REWEIGHT ht_part**6.5 !# KR
+
+CHANNELS
+ RR
+END_CHANNELS
+
+SETUP
+END_SETUP
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2013_I1208923/fnl2332d.1jet.R-warm.run
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2013_I1208923/fnl2332d.1jet.R-warm.run (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2013_I1208923/fnl2332d.1jet.R-warm.run (revision 1772)
@@ -0,0 +1,168 @@
+NNLOJET_RUNCARD
+R-7TeV ! Job name id, must be less than 10 characters
+1jet ! Process name
+40000000 ! Number of events
+10 ! Number of iterations
+2 ! Seed number
+.true. ! Warmup
+.false. ! Production
+CT14nnlo ! PDF set
+0 ! PDF member
+antikt ! Jet algorithm, accepts 'kt', 'cam' or 'antikt'
+0.7d0 ! Rcut
+.false. ! exclusive
+0 ! Heavy particle decay type
+.1e-7 ! Technical cutoff y0
+.false. ! angular averaging of the phase space, default to true
+2 ! Virtual Integration method, use 2 if you're not sure
+all ! RR a/b region flag. Accepts 'a','b' or 'all'.
+0 ! set to zero for MC, 2 for point test
+.false. ! print max weight flag
+.true. ! momentum mapping and PDF storage flag
+.true. ! colour sampling flag
+.false. ! explicit pole check flag, stops integration when set to true
+
+PHYSICAL_PARAMETERS
+7000d0 ! roots
+125d0 ! Mass of the Higgs Boson
+0.004029643852d0 ! Width of the Higgs Boson
+91.1876d0 ! Mass of the Z Boson
+2.4952d0 ! Width of the Z Boson
+80.398d0 ! Mass of the W Boson
+2.1054d0 ! Width of the W Boson
+173.2d0 ! Mass of the Top Quark
+1.41d0 ! Width of the Top Quark
+4.18d0 ! Mass of the Bottom Quark
+0d0 ! Width of the Bottom Quark
+1.275d0 ! Mass of the Charm Quark
+0d0 ! Width of the Charm Quark
+
+! UNIT_PHASE
+
+SELECTORS
+ select jets_pt min = 114 max = 2116
+ select jets_abs_y max = 2.5
+ select njets min = 1
+END_SELECTORS
+
+
+
+HISTOGRAMS
+
+COMPOSITE > xptj0_y1 [114.0,133.0,153.0,174.0,196.0,220.0,245.0,272.0,300.0,330.0,362.0,395.0,430.0,468.0,507.0,548.0,592.0,638.0,686.0,737.0,790.0,846.0,905.0,967.0,1032.0,1101.0,1172.0,1248.0,1327.0,1410.0,1497.0,1588.0,1784.0,2116.0]
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y2 [114.0,133.0,153.0,174.0,196.0,220.0,245.0,272.0,300.0,330.0,362.0,395.0,430.0,468.0,507.0,548.0,592.0,638.0,686.0,737.0,790.0,846.0,905.0,967.0,1032.0,1101.0,1172.0,1248.0,1327.0,1410.0,1784.0]
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y3 [114.0,133.0,153.0,174.0,196.0,220.0,245.0,272.0,300.0,330.0,362.0,395.0,430.0,468.0,507.0,548.0,592.0,638.0,686.0,737.0,790.0,846.0,905.0,967.0,1032.0,1101.0,1172.0,1684.0]
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y4 [114.0,133.0,153.0,174.0,196.0,220.0,245.0,272.0,300.0,330.0,362.0,395.0,430.0,468.0,507.0,548.0,592.0,638.0,686.0,737.0,790.0,846.0,905.0,967.0,1248.0]
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y5 [114.0,133.0,153.0,174.0,196.0,220.0,245.0,272.0,300.0,330.0,362.0,395.0,430.0,468.0,507.0,548.0,592.0,638.0,686.0,905.0]
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+END_HISTOGRAMS
+
+SCALES
+ muf = ptj1 mur = ptj1
+END_SCALES
+
+!####### SYNTAX ######################
+!##
+!## REWEIGHT {observable-name}**{val_power}
+!##
+!#####################################
+
+! REWEIGHT ht_part**4
+! REWEIGHT ht_part**1.4 !# DB
+REWEIGHT ht_part**6.5 !# KR
+
+CHANNELS
+ R
+END_CHANNELS
+
+SETUP
+END_SETUP
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2013_I1208923/fnl2332d.1jet.V-warm.run
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2013_I1208923/fnl2332d.1jet.V-warm.run (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2013_I1208923/fnl2332d.1jet.V-warm.run (revision 1772)
@@ -0,0 +1,168 @@
+NNLOJET_RUNCARD
+V-7TeV ! Job name id, must be less than 10 characters
+1jet ! Process name
+60000000 ! Number of events
+10 ! Number of iterations
+3 ! Seed number
+.true. ! Warmup
+.false. ! Production
+CT14nnlo ! PDF set
+0 ! PDF member
+antikt ! Jet algorithm, accepts 'kt', 'cam' or 'antikt'
+0.7d0 ! Rcut
+.false. ! exclusive
+0 ! Heavy particle decay type
+.1e-7 ! Technical cutoff y0
+.false. ! angular averaging of the phase space, default to true
+2 ! Virtual Integration method, use 2 if you're not sure
+all ! RR a/b region flag. Accepts 'a','b' or 'all'.
+0 ! set to zero for MC, 2 for point test
+.false. ! print max weight flag
+.true. ! momentum mapping and PDF storage flag
+.true. ! colour sampling flag
+.false. ! explicit pole check flag, stops integration when set to true
+
+PHYSICAL_PARAMETERS
+7000d0 ! roots
+125d0 ! Mass of the Higgs Boson
+0.004029643852d0 ! Width of the Higgs Boson
+91.1876d0 ! Mass of the Z Boson
+2.4952d0 ! Width of the Z Boson
+80.398d0 ! Mass of the W Boson
+2.1054d0 ! Width of the W Boson
+173.2d0 ! Mass of the Top Quark
+1.41d0 ! Width of the Top Quark
+4.18d0 ! Mass of the Bottom Quark
+0d0 ! Width of the Bottom Quark
+1.275d0 ! Mass of the Charm Quark
+0d0 ! Width of the Charm Quark
+
+! UNIT_PHASE
+
+SELECTORS
+ select jets_pt min = 114 max = 2116
+ select jets_abs_y max = 2.5
+ select njets min = 1
+END_SELECTORS
+
+
+
+HISTOGRAMS
+
+COMPOSITE > xptj0_y1 [114.0,133.0,153.0,174.0,196.0,220.0,245.0,272.0,300.0,330.0,362.0,395.0,430.0,468.0,507.0,548.0,592.0,638.0,686.0,737.0,790.0,846.0,905.0,967.0,1032.0,1101.0,1172.0,1248.0,1327.0,1410.0,1497.0,1588.0,1784.0,2116.0]
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y2 [114.0,133.0,153.0,174.0,196.0,220.0,245.0,272.0,300.0,330.0,362.0,395.0,430.0,468.0,507.0,548.0,592.0,638.0,686.0,737.0,790.0,846.0,905.0,967.0,1032.0,1101.0,1172.0,1248.0,1327.0,1410.0,1784.0]
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y3 [114.0,133.0,153.0,174.0,196.0,220.0,245.0,272.0,300.0,330.0,362.0,395.0,430.0,468.0,507.0,548.0,592.0,638.0,686.0,737.0,790.0,846.0,905.0,967.0,1032.0,1101.0,1172.0,1684.0]
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y4 [114.0,133.0,153.0,174.0,196.0,220.0,245.0,272.0,300.0,330.0,362.0,395.0,430.0,468.0,507.0,548.0,592.0,638.0,686.0,737.0,790.0,846.0,905.0,967.0,1248.0]
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y5 [114.0,133.0,153.0,174.0,196.0,220.0,245.0,272.0,300.0,330.0,362.0,395.0,430.0,468.0,507.0,548.0,592.0,638.0,686.0,905.0]
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+END_HISTOGRAMS
+
+SCALES
+ muf = ptj1 mur = ptj1
+END_SCALES
+
+!####### SYNTAX ######################
+!##
+!## REWEIGHT {observable-name}**{val_power}
+!##
+!#####################################
+
+! REWEIGHT ht_part**4
+! REWEIGHT ht_part**1.4 !# DB
+REWEIGHT ht_part**6.5 !# KR
+
+CHANNELS
+ V
+END_CHANNELS
+
+SETUP
+END_SETUP
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2013_I1208923/1jet.RRa-7TeV.y.1e-7.RRa
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2013_I1208923/1jet.RRa-7TeV.y.1e-7.RRa (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2013_I1208923/1jet.RRa-7TeV.y.1e-7.RRa (revision 1772)
@@ -0,0 +1,220 @@
+
+ 13F27FF14C31F9B003F3CE330AC0C08213F48B5D77B597C683F51F1CFFCB56156
+3F584F8A5E86C78D3F5F2BE0272FA21B3F63E41C92ABC7823F697B766CE080763F6F6464AC6B306C
+3F72FDD396B008673F770B0F6B2BE0F03F7B9589464D891B3F80778083547CD53F8344669FB73867
+3F8525FDD9021F4D3F8685A936D81C023F87D1AEFE1EEDD23F89428DBAFAD7B33F8B073128D9C3EB
+3F8E1B7AED78AE663F90B4A679BB01013F92411A8F80638C3F9405D1CE90451C3F95FF386F65C672
+3F97D9CA89590BC83F99870FD58331893F9B926545AE03593F9DC10156446EFF3F9FAB44084CCB6F
+3FA0AC0A143E5C613FA1AC837A3832CD3FA26B7A607D87D03FA3384115A2271E3FA416359D985DC1
+3FA4F711F51AB64D3FA5F7A4F8BBF8133FA7365D950545CE3FA87B24F42EA5893FA9BCC3B10684C8
+3FAB252B28C9BD443FAC9DA613A38DEC3FAE231E305690D83FAFC530190315933FB0BB8542FFE225
+3FB196821D8C45C53FB26748AA6BB3113FB3318EC7CBC67C3FB3DAC7F4637E753FB47AEA39763B12
+3FB525791664D22A3FB5E29BF4EADFFF3FB6EFD05EEB87963FB7FBBC0BA067683FB8EFCE63B948CE
+3FBA0A96EF4F2B9A3FBB150020608F543FBC10548399D7073FBCF711A7146BE03FBDE3879D803CE4
+3FBEAD2BA5B07AAE3FBF6B5D366CD5AA3FC03B782F53ABC03FC0F005331BC49C3FC1AB8A39977B83
+3FC259919B0057383FC307C0916C55CB3FC39F1D1A0B2CA33FC45867F11307BE3FC5256AC5180F03
+3FC5F5D955C184713FC6F3C712141B133FC7DF4029DE38093FC8B64182219E203FC991C67CA6C070
+3FCA904EE66550273FCBB6FAE7AC6E3B3FCCD520F386307A3FCDF13775D63FA03FCF1522CEBF381D
+3FD02818EAB2808B3FD0DA57A301095E3FD194D5CDCF56AE3FD252497A8981E83FD3152C4EB53B91
+3FD3EBC82B66FFA93FD4DECB474826B73FD5D1F1DDC401103FD6C17AC661A4DA3FD7CB8CB32ED5E9
+3FD8F335713AB76B3FDA271761FCA7EB3FDB54857725E85B3FDC9B8E4AAB34623FDE32AB4FBFB346
+3FDFA669D9B833DB3FE03FF272E9FDB63FE101FC0F7431FB3FE211D83B4CA7D83FE5FCE8F15AA88F
+3FF0000000000000
+
+ 23E84A4C8959696AC3E9575A7EA4E38F43EA34D33F429B17F3EB0096332FF7BD2
+3EC06FA7A47731113ECF20C0AE91D4D03EDBA230930D7FD53EE8CE0C1BAE6FF43EF642EFDD77B7F6
+3F02F3EB179DF43A3F0E225BA0F450353F13AF60307239E53F196AA56673E7373F206D903CD1DBFB
+3F24E2AF07254CCB3F2A1D3A1C1A2D723F308598797C91F93F344CCF20DF624F3F3A94CD15FF45E3
+3F40A7477762BAE23F44E23ADF55187A3F4A7EFE220B70AF3F50A8007AE379253F53FB7EB12CD3F4
+3F5716A63D208FCB3F5AADC5BCB2728A3F5FC5E5399073FF3F62F4AD581371473F662E7E5DE4EEDB
+3F698ED01B5A87BF3F6D006B4D308ECA3F70EDAFC9B51DA33F7325603A8068213F74E95A8D9CCC6C
+3F76B541DAF84F413F7872BDE36687123F7B093A9DDC8C573F7E03EE66C0BF0B3F804271D6AA42E8
+3F814F40ABF3C2AC3F824C19380321FB3F835C1E76DD396E3F849C5FEF46BF3A3F8680129C99509D
+3F88422D69357FD53F89E44EAC8C61D93F8B8CEA96A1C29F3F8CDD6A7DC0AF263F8E3EEB16638777
+3F8FF0D8D11D27413F90D2C7292B4E473F91A74BC139B6C83F92BDAFF4A0291B3F93FB2A4AA87F83
+3F95326D243E7ECC3F968670C9C309E63F97E45CE6C6FA523F9982102E4233CC3F9B1BBE2394564D
+3F9CED6C3D12B92D3F9EC08BA9A970D83FA06FD428C904C03FA1778AC921C2B33FA2AD8D558BAE4D
+3FA3E48560C3F1C23FA520883CAF2FF43FA64A26B4B9DE743FA75581F4A2D4293FA85501ED55C1A2
+3FA978E5EB9FC6F83FAACA6B3A21D3C53FAC4F6F241A29153FADE4A72A519ED23FAFE20DCCDEF57D
+3FB103BE6D17244D3FB22A4FD69D89013FB3370F08B701753FB4236B0D5B11923FB511213003D278
+3FB61A4CFEEE1BE03FB759137EA0E6903FB8C35898004BF13FBA5242201331C43FBC19B0CAE2D126
+3FBE04206D67A6C03FC02237AE6B51473FC15243B700AAE73FC2786A296546F93FC3A961FB35954E
+3FC51A08B83B3EA83FC68437E68B4F433FC7C967BB7BFBFC3FC979B69B631E273FCB40823B128C26
+3FCD273368B93AED3FCF23BC4DFDD1DC3FD0B981023A5DED3FD278CD6416D7943FD703C4854ABA2B
+3FF0000000000000
+
+ 33FD9A1A5460CD2F43FDFEBFE9C938B193FE087AE60B3DD643FE0F32219288D4F
+3FE15DDAA72A7E133FE1ABA396D421863FE1E7AE265358313FE22677B8F6D7C23FE26648937FA02F
+3FE2B19E86E172C53FE30A8C157AC62C3FE35E01E06BF21A3FE3B2E33BCFD3E03FE4008D16B27531
+3FE43D123CB0D4F83FE47483DFF997FC3FE4ADFD40873F733FE4EA37F3F148643FE532CB0AFF9C8B
+3FE579C15E08EE003FE5B953F76B40813FE5FB5769A8A1763FE62D3E76DF0D813FE6559C0B33E921
+3FE67C2E39A58AFC3FE6A2F096A7C83C3FE6D0878BC5DD263FE71019A9EE5F783FE751D0D3F4D5CA
+3FE78E1E496846073FE7C8D943BBC5A63FE7FD7D7DFFE6BE3FE830EBAEC39F653FE85A1197903945
+3FE889C9849947783FE8B5F63C2AADDB3FE8E2389924B7B93FE909CAA0535F1F3FE9336FC48FE28F
+3FE95D947B10507E3FE99084DF47FE273FE9B9FB0A2F01073FE9DFD41FEAA3B53FEA0336B64A7FDD
+3FEA1F628502A75D3FEA44A27FDF55CC3FEA69C3284265543FEA9454497F527A3FEAC3AF4F5F5680
+3FEAE92F176D214C3FEB032AF8774C763FEB1B40E6FD4D793FEB33542E7CDF403FEB4D4E933FDC30
+3FEB7258B2F5D29E3FEB96F66731A8D03FEBB1A6EFC9411E3FEBCC7D49B647723FEBE08CBA1FBF0D
+3FEBF6456B6A7CFB3FEC0AB13CB963893FEC1CB603FDFC3F3FEC37D60A817A513FEC52DF374DE15C
+3FEC7512AEE695883FEC9AB84508E3713FECBE21280C79343FECDEDD2468AF9C3FED01E12D55612E
+3FED1FCAA9B530F13FED35BAD25F0AAB3FED4AC5CEF5D1DB3FED5D23B68C45173FED75BD844763BA
+3FED8D87148669793FEDA217227E2DB43FEDB6BBA089DD333FEDCC1A89E2AFBA3FEDE2ACD3363876
+3FEDFA387D923E973FEE0FF2ECD320E43FEE2822AB04B76E3FEE3E194EA52F7F3FEE5625950B9F86
+3FEE71CFDF775F103FEE8CED07FAFFFE3FEEA5A8041DB9873FEEBD4084FED2713FEED268ACB4B87B
+3FEEE89C236498843FEF03E691EC0A993FEF200B84D332043FEF3DD4A22A28453FEF5992D5B9B786
+3FEF75D0DB0BA6263FEF92B38EE2BF5D3FEFAD7E08593D883FEFCA70640A5ADA3FEFE48C5D2ECAFD
+3FF0000000000000
+
+ 43FD9203F6637E1B23FE2F26DAEFDF09C3FE6718E282C2E333FE837C4B469736C
+3FE96FCE7697654C3FEA5BD99F80D8453FEB10043DC368823FEB93C5702E38B93FEBFB3C93EEF3F6
+3FEC4C59C79A06843FEC8A4308A3A3533FECC1C7C14F0E813FECF34DB22E4E383FED2798C1EFAF5A
+3FED54C8033B2BBD3FED7A6C2E938E253FED99A40C6D5EE43FEDB7B0776C12E23FEDD37B80DFA30C
+3FEDEA7176DC01773FEDF8CCE2AEC41D3FEE07DD4BFF3A863FEE178EF8137D8B3FEE2764CBBDC7C8
+3FEE3A7942407D4B3FEE52153BD9B84E3FEE67300BFF354F3FEE7A202948CBC03FEE88ECC8945137
+3FEE95E9BEC40FE63FEEA1FA61F302DA3FEEADEBD982E1E33FEEB729E58566D13FEEC53EEAE121F9
+3FEED3B09B9D64213FEEE415E59EF5723FEEF2C95A02B0F13FEEFFDCF59FCD193FEF0BC60BF5366F
+3FEF167909A44FFA3FEF2107ACCD2D3A3FEF2C1861B337D13FEF36A7C1B5A7F23FEF40DDBF2FED96
+3FEF4A62FF681DB93FEF52E777BBA3C33FEF5B07D472915E3FEF633CB7ACDD6E3FEF6CC7904097F3
+3FEF73E0010D9C2D3FEF7A89605D29BF3FEF7FEAE1C841573FEF849AA928898E3FEF89DB4862584B
+3FEF8FD64A4D184B3FEF95F0F2AA007B3FEF9BD9FF55A61C3FEFA24F6693F2D73FEFA65D01DB77E5
+3FEFAA1AA0EDA46A3FEFADC11448AA323FEFB16E1FE3032E3FEFB54F2B19E94F3FEFB9A52A55B6FD
+3FEFBE641AFB28A43FEFC2F77EB6B5FB3FEFC82F16A6362B3FEFCD17E079569E3FEFD19E0C36406D
+3FEFD5E9F1E3F3C43FEFD95B274DD6A63FEFDC9616938C743FEFDF7E598878AA3FEFE2F93F13D7A1
+3FEFE69511161F853FEFE92DE574BD9F3FEFEB78DAC5E4313FEFED89C052E6ED3FEFF007B46B3A0E
+3FEFF281CE1E9E763FEFF4D21A2386D73FEFF6AEA1B60BC73FEFF83F32C492B53FEFF9A1D38501C5
+3FEFFAF0379632093FEFFC0F69A248B33FEFFD113BF13B4B3FEFFDE8241B3B6D3FEFFE82DFB6121B
+3FEFFEF82388F7893FEFFF5237B8AA9B3FEFFF92E6ADDA993FEFFFBF8EFC46BF3FEFFFD331E9C67B
+3FEFFFE26C868AE73FEFFFEE58E46B123FEFFFF53DEE6D763FEFFFFAF892BB2A3FEFFFFDF33361BA
+3FF0000000000000
+
+ 53F7D8AB7BCBE4A363F8FCB9A26546B453F984F5C7CAC369E3F9CFBEA01963565
+3FA1EE94EE98AB8E3FA5A9EC86D3F3DD3FA91165FA63BF1A3FADD1AF4978FAD13FB195E192119376
+3FB46D065139D0B13FB7A34F3F0FF0263FBB12208A6375AE3FBE622098BB27B03FC0B13EA58EB78E
+3FC2486DA8B3C3983FC3F525FEDB02213FC5A561B5BBC5C33FC7989488533C2C3FC98F4E69913AC5
+3FCB6F0D3E9B836A3FCD5F4C737F87D03FCF2F8709BEDE983FD07DAB8FCEA94A3FD16010D9225935
+3FD2433AC5662C0D3FD33472A8B843903FD430382989AC193FD51F32B281F79D3FD5EEBD999C2C76
+3FD6B2F858FB8E563FD777EE71DA1C1D3FD8386BCCF799223FD8F1C0041716FF3FD99F23709D67EB
+3FDA45AC631F370C3FDAE8C633CA891E3FDB74BC55790E503FDBE1694492861E3FDC4DB29D698654
+3FDCB66A208ACB143FDD1A1188E46C703FDDA491F8AF5E283FDE2CC0A25F1F063FDE8FA5EFF54867
+3FDEE008484F62B23FDF40ABB61BC1AC3FDF972C0EA01FA93FDFD763C749D22F3FE00062899D7A92
+3FE0130D4B4005163FE029E4E94CDE003FE04830E8740F723FE071774AF822D43FE09A2F3AB8A718
+3FE0C3F04E288C703FE0EFED7F08FED43FE124A1F2CD72F83FE16050BFF9B7D83FE19D2C5131FDBE
+3FE1DFD56D2FB82F3FE2213FB5FE61DB3FE27733F87602F63FE2CCCF32A889223FE2FE3F989DDDAF
+3FE33209973504893FE366D722DAA6A63FE394C806177FFA3FE3D92510F968FF3FE4247F556FA1BE
+3FE471E73613775E3FE4C48B8512608E3FE51F409CDB6B063FE575EA3741A7553FE5D6E2EABB38AE
+3FE643F0B1CAD93A3FE6C43E8C6F68613FE73E30772137193FE7B1D986A1943A3FE833FB03104BF0
+3FE8B52AEEC7894F3FE92AF6A28B170A3FE9A17E36AD74953FEA09D2FE9BFE553FEA68EC9E2970CF
+3FEAC8D6419C74603FEB2C9741DBBAC93FEBA4BD8AFC4C763FEC296C23B49D333FEC9349CF994146
+3FED009DAAFC770A3FED67A25C7EB7713FEDCBFE69D118693FEE2A308343060A3FEE7AB1897EE1B3
+3FEEC80E0329282E3FEF15CD9672244E3FEF527463F58F163FEF8F4CBA7B637C3FEFC946734B4B64
+3FF0000000000000
+
+ 63FBE2D6E898ACAFF3FC97348E924C6583FCF5700D350A66D3FD18FA7CBFF0D00
+3FD2FC667F9EFDED3FD41A46B59EA9073FD508F79A835F863FD5DE701DA685023FD68277F5365D7F
+3FD70428607C061C3FD776F0AF7DA53E3FD7C493ED4A115F3FD820AFACC19AAB3FD8832757140426
+3FD8EB70F7338E2D3FD94D18096456FB3FD9A1A66B2FAE2E3FD9DBC320B4FE643FDA09B3343F2C51
+3FDA434B230807813FDA7F23BC9249263FDABA03C9E0CBEF3FDAFEEDE181F0923FDB355929A3AF79
+3FDB716222FABD523FDBAD69CD88C48F3FDBF2C32F5579593FDC3874BEA49D233FDC6EFDF0EE891F
+3FDCA8965E7A4E103FDCE20D78045EAD3FDD18330E2EF2E83FDD494E99B857133FDD7A0AEA0A4900
+3FDDAFB74201D1573FDDE495198D8B193FDE1667520BF7FA3FDE3ED94AA57FB23FDE5BE5B44E277F
+3FDE745CB2CAE6E83FDE8D496CCAF2C23FDEA9A8FCE290D43FDEC5B87A5F06413FDEE16F63FBB591
+3FDF02D80B73F5B53FDF25C1584998273FDF4CCCD29828743FDF76318000D1B63FDF9FD1FE7C37E2
+3FDFCC8AA667704F3FDFF83160A0F9B83FE01139BC71D21C3FE025A356BA16E13FE03A8A4D8724F0
+3FE0517E7685E4A23FE06705661C24943FE07B2FF28F45D63FE088D6CFAEB70D3FE09A9A3F476D2A
+3FE0B162AD330C2D3FE0CA20972BECE13FE0E32BC95FEB6B3FE0FB39CC32ED893FE11483F1EF52B9
+3FE12F243C6D39423FE142F7705E8F0E3FE158A988C3E98B3FE17003871BF70E3FE189DE39A2AEAB
+3FE1A4AD42450D5C3FE1C2A47E548C3E3FE1D9EA3827F0BD3FE1EC6F3B7F13D13FE1FD581C40791B
+3FE210F4435F0F493FE2286197B05EE43FE2458CC0D36AA83FE269E13499A2303FE28F83ED09277D
+3FE2BB1F18D164BF3FE2E96D927480153FE319D21B0B10913FE3518C3C2F2E343FE38D3E14428285
+3FE3CF5CFBD6FE293FE41A543F9A592D3FE468A30176CA0D3FE4B9F209D7FB273FE51746504AD9CE
+3FE57107802364BF3FE5BF30925ADF633FE60EDAFB70132F3FE6631EFC9865223FE6E817B33C259D
+3FE7B045A9E35A0D3FE8A110A3EAA6743FEA41C7C1EA57763FEBBD1D6DA1E8793FEDC2473E04287F
+3FF0000000000000
+
+ 73F7756A43BDAC0FE3F879DAD9789F1AB3F926FD2F0BDB0CC3F9B55873E1A20FF
+3FA242A2663892A03FA6D416AE8EDA0F3FAAEA7B2074F07C3FB0153089E210B33FB2BE4420A4044B
+3FB5881E200002D83FB8B61A70070E073FBB8F7C3357D47F3FBDE6F8EB9A5A673FC019E94BB09032
+3FC12380512155B83FC272C2B5F6A4AC3FC3A0F39E9E4B423FC4B087810F7CE33FC5BDEF7F8A8EFF
+3FC71D40C036D6EE3FC8118928DC547D3FC931543F04F9083FCA4A250FA7B8D73FCB5C619ACAF016
+3FCCADF803020B8E3FCDFABB31C25C1F3FCF61DA860162FE3FD06EF628BDF7FE3FD12E77716238B8
+3FD20FA9B0CFB63F3FD2ED552C92D5C93FD3BAEB271B3CCB3FD4711B526517BF3FD5344EA4387977
+3FD60B49A4D7231A3FD6DED63FCB05453FD7BD678D883B903FD8794C2D164DA43FD90577AAFB3DFD
+3FD97E562B6725B23FD9F4427FB688C43FDA6C2A1687E87D3FDB0240E5F1536E3FDBC5EF12F613BC
+3FDC5E57692E67743FDCD1D6464CE3F03FDD3EB8B0CAD67E3FDD9E735D86AF5C3FDE2FE1F847EE3E
+3FDEDD1ACAF1BD163FDF97E97FBADC653FE018259AE98F8D3FE05FBFC1ACBB643FE09C4980D0D37E
+3FE0F0247A3822C83FE13FA989DC79BD3FE195954E8F36E73FE1EDCCB8E6A5A53FE23F47C0551AB0
+3FE2A08346C5BC903FE2FA1520BAFA8A3FE3469767BDB1EF3FE3C2B2891A53003FE3FDBEB55537C9
+3FE4394767593D023FE480B694C6BA353FE4C2DE044E81803FE501AB5F13F86D3FE57509FF5EDD42
+3FE5E4ECB6AAD6843FE64612222595C23FE6AB023FE091FD3FE7131AD2EDA4E63FE7833F93CBAA58
+3FE7F0ADA62B70743FE859561D13FDEC3FE8C2DB81C3EF9F3FE928768F6468753FE97E2A4A9BC933
+3FE9D3B934DCF47B3FEA29EF4E0417DB3FEA8B6ACE4BFA973FEB0228873964D73FEB6CFBD2968FF8
+3FEBC3451305272C3FEC15FB2F74BCA83FEC62A7560BFC803FECAC2606D0041F3FECEF9A040A33F8
+3FED3AEEA65346083FED86CA19CF82BE3FEDCFC8802C67F13FEE11E050D48CA33FEE576784A71FDD
+3FEEA4D0446182633FEEEDF074688D933FEF3483E7C070BB3FEF73DF8604E1C93FEFB437949B2974
+3FF0000000000000
+
+ 83F937D0579403FBA3F9F7157D987A2DA3FA4D1C7ED9B93BC3FA9287069D2B7F1
+3FADF609B4F5FF303FB1B8C961A320513FB451DE415663043FB6CD8829B13C9B3FB9501AB5E3FCDB
+3FBB2B76F1AEFA083FBCE825A1E607843FBFA08D519488703FC166744B0CD9FA3FC304E3A066EA36
+3FC4A57A1A7499103FC609C998E8D6EC3FC732D91FF4F0613FC83E61279F8ED93FC93416A438A5F8
+3FCA36EFE7EB1D1E3FCB49B8AA17D4593FCC80EBB0058E143FCDE4E38EE3AA2D3FCF230B11D311C3
+3FD0274C8618DCE93FD0CFD6243887F53FD15E74471FAB483FD1E8A54AB1D53C3FD27C880AAF9BF4
+3FD2EA94C29C53443FD36487A0D757693FD3E193DA5458F63FD46D96FC44452A3FD4F9F11149E0A3
+3FD57A53A664887A3FD5E82E6DB85B6A3FD6552D91FFC84B3FD6B09654FF17D53FD7199774F90FFA
+3FD789A38B68CBB93FD7F93843784DA13FD86814F4FD731E3FD8D35738130C743FD93DF2388E5023
+3FD99D918284AE8D3FDA01CE6249F35E3FDA5EB8326D53053FDAAD888434B94A3FDAFD139D9B2429
+3FDB64BF2A8B7EDD3FDBC72F81B658283FDC196840EA61F43FDC626CDC9B1E623FDCBEC94BB42DC1
+3FDD1EDF1B2C04E53FDD8A496CF290733FDDE989E408AFDA3FDE3BC8F23D4E653FDE8F5B2B22A998
+3FDEE01EE72F4EB33FDF35C8C0EED2BF3FDF905664B0AC783FDFF1D01F1D8EBC3FE02DEDEEACE41A
+3FE06222D3589B2D3FE092E20C2B4AAD3FE0BDC3016EAF5E3FE0DDB2110147263FE0FB080333F9AD
+3FE117AC37F0E33E3FE136C9FA8184573FE15845840948B43FE183A287BA4CB13FE1B6A1FA94B87A
+3FE1EAA76939494B3FE21E3B9300AF1D3FE257804BEAE4153FE28CD4B9DBF5E53FE2BAE9071A7186
+3FE2EC0AC90BE1753FE32046B9A40B3C3FE352DD102DFDE23FE386EA8A71E66F3FE3BA0BDD9E3E21
+3FE3EFDA53FD406B3FE427E71CCB123F3FE480A3BB4B3FC43FE4CD66B1E0322C3FE51362366460B3
+3FE558791B5AFA4E3FE5A617642849D93FE605EE1EA88DA53FE67BF2B2A263CC3FE6F4808E69F834
+3FE754DB67644DB53FE7CB60AE8A70B93FE85696CE3FAFBE3FE94289E2DAC04C3FEB12A8E00143AD
+3FF0000000000000
+
+ 93FC05A4BF9F0AA313FC5EC0BFC59D1963FC8F3FF13EB1F5F3FCB68392CFC4ADE
+3FCD949DE8C4D47A3FCF202E60855F5C3FD039B06F21C7813FD0C6D16B9CDD023FD13A8343B50210
+3FD1B2573D54397F3FD21712D2E417CB3FD27EC6664D71AE3FD2FA8969E8BF943FD36E5D75B87E52
+3FD3F35F47D03C9C3FD4754C1687C16D3FD4EBF7089CBED83FD55F581C8A4F803FD5D4D52B6748DF
+3FD64C0A956EF7A33FD6C1346A8A73AE3FD73AE7E9C4C6983FD7B40396255DEE3FD81CE8A37BCAD0
+3FD874ED541C3A573FD8C6DAF603C5733FD9128D1D9C0D993FD964F77166F3D23FD9C69BF74E6E0C
+3FDA23E5F1E5D7DC3FDA7EA7A310C0CB3FDACB6B97C95A5D3FDB246F2D9E0B393FDB84BCEE4C43CF
+3FDBDADC58DD3DF83FDC0C09A2D839BA3FDC3B591BF673783FDC6C309AE126583FDC9654875594CA
+3FDCB7DFBF73C2A13FDCF4CFDDA8E82E3FDD43377B92DE173FDD9A1A13D607063FDDE7506E8DB43E
+3FDE2B5A391E78023FDE6FA0713E7A1B3FDEC2994FD1B5E23FDF200192FD5D563FDF77ECF1FF2702
+3FDFC0028D352E843FE002F2247DEB0D3FE0272406C2CAC23FE04F936162636C3FE0796315DDA2DD
+3FE09C84C722BD643FE0BEE5B35207583FE0E0D9DE7EFA3B3FE101D1575EAB363FE12642D74A07F3
+3FE14B82394744D43FE1787F2910D7C23FE1A8D127F003A13FE1D608FE1BCA893FE206C1ABD1C2B9
+3FE236F66531B66E3FE26AE03665DB623FE2A3305501A3953FE2D871E6C2EA3C3FE30A7A3A2D2684
+3FE334CCB817DDC83FE360035424BDD73FE38DB02B6C6D893FE3B2AFFA900ADB3FE3D4BA76773B61
+3FE3F6B5A6D0AC6A3FE422EFA4FB06CF3FE457F211E6218D3FE490DF92E24D553FE4CD5A20FF62CC
+3FE50720180FB5083FE53B05238E702D3FE57213E9B43ADF3FE5AACCEF2893E33FE5E34C3B0F8DE1
+3FE619A975FCB16B3FE64E4BC1B224D43FE67300F44DABBB3FE69FE0C7FA6E223FE6D103CCC86AE3
+3FE709C81478A3373FE753C503B353F93FE7ADA35A1A59733FE7FA78392B04F43FE844906397A1B6
+3FE89252C9587E0D3FE8E4B91DB7C8533FE97DEC6630763E3FEA4FB061E3D2ED3FEBF89D2F8388A0
+3FF0000000000000
+
+ A3F847AE147AE14803F947AE147AE14803F9EB851EB851EC03FA47AE147AE1480
+3FA99999999999A03FAEB851EB851EC03FB1EB851EB851F03FB47AE147AE14803FB70A3D70A3D710
+3FB99999999999A03FBC28F5C28F5C303FBEB851EB851EC03FC0A3D70A3D70A83FC1EB851EB851F0
+3FC33333333333383FC47AE147AE14803FC5C28F5C28F5C83FC70A3D70A3D7103FC851EB851EB858
+3FC99999999999A03FCAE147AE147AE83FCC28F5C28F5C303FCD70A3D70A3D783FCEB851EB851EC0
+3FD00000000000043FD0A3D70A3D70A83FD147AE147AE14C3FD1EB851EB851F03FD28F5C28F5C294
+3FD33333333333383FD3D70A3D70A3DC3FD47AE147AE14803FD51EB851EB85243FD5C28F5C28F5C8
+3FD666666666666C3FD70A3D70A3D7103FD7AE147AE147B43FD851EB851EB8583FD8F5C28F5C28FC
+3FD99999999999A03FDA3D70A3D70A443FDAE147AE147AE83FDB851EB851EB8C3FDC28F5C28F5C30
+3FDCCCCCCCCCCCD43FDD70A3D70A3D783FDE147AE147AE1C3FDEB851EB851EC03FDF5C28F5C28F64
+3FE00000000000043FE051EB851EB8563FE0A3D70A3D70A83FE0F5C28F5C28FA3FE147AE147AE14C
+3FE199999999999E3FE1EB851EB851F03FE23D70A3D70A423FE28F5C28F5C2943FE2E147AE147AE6
+3FE33333333333383FE3851EB851EB8A3FE3D70A3D70A3DC3FE428F5C28F5C2E3FE47AE147AE1480
+3FE4CCCCCCCCCCD23FE51EB851EB85243FE570A3D70A3D763FE5C28F5C28F5C83FE6147AE147AE1A
+3FE666666666666C3FE6B851EB851EBE3FE70A3D70A3D7103FE75C28F5C28F623FE7AE147AE147B4
+3FE80000000000063FE851EB851EB8583FE8A3D70A3D70AA3FE8F5C28F5C28FC3FE947AE147AE14E
+3FE99999999999A03FE9EB851EB851F23FEA3D70A3D70A443FEA8F5C28F5C2963FEAE147AE147AE8
+3FEB33333333333A3FEB851EB851EB8C3FEBD70A3D70A3DE3FEC28F5C28F5C303FEC7AE147AE1482
+3FECCCCCCCCCCCD43FED1EB851EB85263FED70A3D70A3D773FEDC28F5C28F5C93FEE147AE147AE1B
+3FEE66666666666D3FEEB851EB851EBF3FEF0A3D70A3D7113FEF5C28F5C28F633FEFAE147AE147B5
+3FF0000000000000
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2013_I1208923/1jet.RRb-7TeV.y.1e-7.RRb
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2013_I1208923/1jet.RRb-7TeV.y.1e-7.RRb (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2013_I1208923/1jet.RRb-7TeV.y.1e-7.RRb (revision 1772)
@@ -0,0 +1,220 @@
+
+ 13F95D1421AD27E503FA69E9F1FA7ED8C3FB13FDBE2299BFD3FB7CAD8199CC9AD
+3FBF335A206AB0D33FC34522A1087E4A3FC6EACA16599A013FCA9906E7A332F03FCE8E16E3B232DE
+3FD15B28136AEC693FD38556EEAE26C93FD5983594CD3B383FD79A9331EA5B0C3FD9A281FF1C3B6F
+3FDBA6682C53B18E3FDDA78DF48981793FDFB1E509BB2C643FE06BFB9622928D3FE0D37E7B2E3A2F
+3FE13E2F0915AF773FE19D8FF7154D6B3FE1F6733255779E3FE24B8DDC5880013FE2CA347A716DB3
+3FE377EB17C9F0CF3FE3F8929630C6983FE46B7A7A563D8A3FE4D59FDE3E8D383FE54044BCF456F4
+3FE5AB446BD0EBE83FE60AB61C41027E3FE6673F83830CE53FE6B7131F9EFC7B3FE6EA764598785F
+3FE71E003355F4433FE751B9185EAD503FE77AB3546B49AC3FE79D1EA88F92E43FE7B999CA6256A4
+3FE7DE5DC935E18F3FE7FA27FA01B57A3FE81924ED4F93C33FE837C3C064A9513FE85FEA4CE9BBFC
+3FE89B018FC556263FE8C0C9814AF9613FE8E5DACBC2618A3FE906CDC4D7F5F43FE929D2D79808B4
+3FE94E0B9044161D3FE972AF6751C3CF3FE99665F522B7D53FE9B4B7427BA2023FE9D251ECBF1EB1
+3FE9EF873F27B92B3FEA0C9DF79006453FEA2CBFFBE42ED93FEA52565126EA553FEA799DB9DE6315
+3FEA9F99334DD82D3FEAC6901EFBE5A63FEAEB16FE1F6D143FEB0F36868B796D3FEB3566DBAE05CD
+3FEB5BD7A8F220733FEB851E788B0BB03FEBAB3FC4A4D1183FEBD0E6C7B4864C3FEBF7F58BA0576D
+3FEC1E244FBFAEA13FEC4562FE8F8B723FEC6A1A20AD10983FEC8E638E28BC4F3FECB211B51DB21D
+3FECD5BD0A3DE1103FECFC91B312FF003FED2029571686623FED4305EC771A103FED62159DE0CBC6
+3FED7DD9C02F63CF3FED99DA150172EF3FEDB4BA687628F63FEDCF4D6C166B063FEDEB2924533DD6
+3FEE052A8AD3FA7E3FEE1FECE0E0EBD93FEE38FD198405B93FEE52F762448A613FEE6BBA2147FD09
+3FEE8485702FCF833FEE9DD0D001670A3FEEB90F0D6FD3883FEED4CD9BA2DEFD3FEEF00D892268A5
+3FEF0B4A6F8FC79B3FEF27807D33D65B3FEF46EF985611543FEF6E0459FD54593FEFA5DEB0171CB2
+3FF0000000000000
+
+ 23F9541B115DE3A9B3FA5C8ACF32801603FB193FC73AF1A5F3FB91A5634F721ED
+3FC05F025E66CBD03FC443D670F69E9E3FC806346B1C38703FCB8B58E6593B2C3FCEFE85DF35D3E1
+3FD1586E072535353FD358FA665AFAFE3FD5451A8A3CD4973FD6BA47704C441A3FD7AB69B08838C2
+3FD8A284AC33F4F63FD9B250D9E1E1093FDAE571008265F63FDC0C4C3E591D253FDD37F60D1C9109
+3FDF0D0FCDAB81963FE0667FFE3B16053FE12CAF57A808A43FE1DC0A216C2B893FE289FCD835EA1A
+3FE32FA90BF5EAAB3FE3E77E4900E68F3FE491C640C1E7F23FE52E7D8146C39D3FE5B4001C006B15
+3FE63319FE8347853FE6A17FD9E9FE4F3FE7095E1662ADC03FE760F59410AA7F3FE796BBABADBDB1
+3FE7C396FEF9C1D43FE7EF4B863FB4BF3FE81E4AC5CCA5F73FE84BD947C5A79A3FE86BBE3BA269FA
+3FE8941717F9B0E63FE8C66F2A50CFD63FE8FEA2ED5F9E6E3FE93A85EBF8093D3FE975D174E85B1B
+3FE9AD2FD7C092353FE9E0BB46FDB0B13FEA126FBA122AE83FEA43CA0FFFED263FEA739EE0646C03
+3FEAA2CBE0FD5E243FEACED06D20927D3FEAE4AFF100DDBD3FEAFA977BE0073D3FEB10DB4DF4A9F9
+3FEB271F20094CB63FEB3BF363F31C123FEB5099E353CC003FEB71E8D4C649AB3FEB98D576113E1A
+3FEBBF45DFCC4F683FEBE4C9FC0414F03FEC08078DEA95AD3FEC29CC69C4BEC53FEC4CB72A0FB555
+3FEC70B4CF270E4A3FEC8F91211838A13FECADA55215D4763FECCA3D12E6E6DF3FECDE7165262007
+3FECF44FB9E16D7F3FED0A3443EE56603FED21EB8E168B2B3FED3EA28E83231C3FED5AEAD427F6FF
+3FED75DC55E188643FED90437D9160823FEDAA5BD8E682373FEDC4E7F38CD0B03FEDDE50BD3D83B3
+3FEDF618BB0648E03FEE0CB5E4075D723FEE21C13869EC9E3FEE371E9AF047FB3FEE4D202291C8AF
+3FEE631CA8953D8F3FEE79A75AF9D36E3FEE8F28048BBF573FEEA519E68403813FEEBBED55151D36
+3FEED1860206EC613FEEE6A4E0FA8BD83FEEFC19EE8E8D2B3FEF136C105D016C3FEF2D2050C8521B
+3FEF472F52A976103FEF62609C6DE7A63FEF801B06AD94103FEFA00C20C8B4AB3FEFCBBBA546E2B8
+3FF0000000000000
+
+ 33FD562B1771B4A523FDB6E8E0D488F453FDD31FD010787923FDE08738843C35B
+3FDEA4B179B295683FDF1AD6652D608E3FDF60BE7967B7803FDF9CB90FBCAD1E3FDFDA016C6997BD
+3FE008C752A79AB43FE023D727D868CC3FE03DADE5361F213FE05E6B3AF6F73B3FE08834DD070B08
+3FE0B0DE481D9C7C3FE0D775DECA5F973FE0FE3480294EFF3FE1242FB2DB2EBA3FE14C6EA2465931
+3FE1721DDD994F433FE19C6CE42302733FE1C7AC2131155A3FE1F25F965EDA4F3FE21AE1C2F80773
+3FE23F1D3D0CAC623FE262F9E09476443FE28A0D302163403FE2B84612EB46A53FE2EAF9EF70C467
+3FE31F0C747F9CF93FE34B461476724E3FE3777BC1DA45D23FE39DF2481689AB3FE3C986E4C9450B
+3FE3F51170A803DA3FE42323CF05E43F3FE44D7A6F3BE1273FE476F8034267113FE4A2589FB17391
+3FE4CCD2035FC1703FE4E51186A2ED7D3FE4FD96F1146D1B3FE515C12A2A2BF43FE530EC3C872079
+3FE548E0FEA825EB3FE5639946050AB13FE58CC188EC91923FE5B607E221C7493FE5E0B33A03F643
+3FE6130B2535495C3FE64465897D3CE83FE673224D07B4323FE69F1A80285D373FE6CE2D22FF3475
+3FE6FC3EEF910E463FE72BA34547100B3FE7579CB51E46A33FE7785D5928A72D3FE79146DCC56442
+3FE7A9948F27BFB53FE7C19982EC07973FE7D9F40B05A19D3FE7F4A4DFC116D23FE821C3EF92B491
+3FE852E0AF937EA33FE8840E858E3B233FE8B49DDA9E73E23FE8E1EEA3C605823FE9014F37D8AAD1
+3FE91F519F1DFF5A3FE93C85241C41763FE959D653E043693FE9789A0B865C5E3FE99BF6CBC2C0A8
+3FE9C5EA99B755393FE9F0B3CBBBE2B23FEA1DDEA00B27D83FEA4C6F40C29BBA3FEA7AF0D5BF625A
+3FEAAA2F26D446AB3FEAD93EE499DD4C3FEB0631865712D13FEB316C1C87FFAE3FEB5D275EA91B04
+3FEB8B02FA48BB893FEBBC509AAD400F3FEBEF03300BF14E3FEC2314061090FE3FEC5324F2288AE1
+3FEC847F82F86E793FECB681C044059F3FECEA751232E0E23FED21AE73581A3A3FED5F78EA2CA1C1
+3FEDA4F8FE79F3C13FEDF5B858DB773E3FEE53E93522EF143FEEC3C27B88D1593FEF4DC587F679BA
+3FF0000000000000
+
+ 43F9F443134EA23683FAC666830F56F4B3FB4BF897352BA0D3FBA9DCAC5604831
+3FC05C69C6B193523FC37860DDFB0CF43FC67DDDB33D57C43FC96C2E8B05D2B13FCBF1EFCB79CE3B
+3FCDB30BBA9014163FCF65A7009FCCF63FD0BC87183344533FD1C70AEDAE18023FD2618E30775441
+3FD2E78FA09B94503FD368617B2DC3483FD3E88C8C5C2A2E3FD465E6D60976C83FD4F2E93BAF4F0F
+3FD5999E1544E6E83FD60A41E31518493FD67315925916FF3FD6D326FD5717EC3FD7307031F38375
+3FD79664C76625953FD81AA9668EF8E63FD8A5F068AAE0133FD917B640F116063FD98092C191E326
+3FD9E2A40BF091FE3FDA5182809CC0C83FDABD9B21E9EE833FDB223BDC13EEEF3FDB85C233F921B2
+3FDBE7C4273E5F5F3FDC4A5F1DEC220C3FDCAFC0D79519033FDD0DE525A6E3EF3FDD5F645FAF3062
+3FDDA93EFFAFC1AF3FDDEA60CACC19CD3FDE276E6FA13C973FDE5ECA35DFEFA73FDE93BBF8BFA5B4
+3FDEC44D5EB39A123FDEF57CFEBA2D453FDF26D8D7D90A333FDF5480BB8A42E43FDF7EDBAD7A0E82
+3FDFA6982EC933DA3FDFCD4BB1F2BA8E3FDFF522880C2BFD3FE00F4B5CFAAE463FE024A6212CDB2C
+3FE03927F03B85843FE04C2C9DC124D73FE05F4C95FF83AE3FE0733299EEF1CF3FE088357DFBA8A7
+3FE09EEB0B4F120D3FE0B77EDECCB01B3FE0D151606BBFE93FE0EC6A1C3647FB3FE10AE6A559813B
+3FE12D82C524EDF53FE154316246D7153FE17F442E4725BB3FE1AED63514C8163FE1E38451C27CAD
+3FE21C3C8B1B6EB63FE2566F6DEB99063FE2932E8A2F0CDF3FE2D2CA287EB3313FE31518F0F45ADA
+3FE3582C0BB0D0CF3FE397B74BE59D103FE3DDCBD5382EBB3FE42C467043F4A03FE48217E8478D85
+3FE4E2105D3F7FFF3FE5386BBC92E61F3FE5879571FC1DDF3FE5F4AA6CABEB263FE68D01FA938F43
+3FE7349DFC978D6E3FE7EFE6532589B23FE8CE0F8624A0133FE9BCF20F7244DF3FEA67E14C45CBD8
+3FEAF7EDC2C84FE43FEB356D7861DF0C3FEB8EC34D0845523FEBF553620C83173FEC65A30F94D994
+3FECDBF3E2D328603FED5465385792C53FEE304401E7B53B3FEE9B8E76567E1E3FEF1861D0147E04
+3FF0000000000000
+
+ 53F8AC3979D5E3F043F9AB389B2EE29503FA43FEE7C538F263FAAB724C2B7FD0A
+3FB0792930A64B6E3FB3310EA6CE89B53FB5BD02873146F03FB84EC567DAB7DF3FBAD9A511B81FD7
+3FBDCD24FA8510AA3FC041ECC63A6AB13FC19767320290B93FC2F5F3E7C1CED93FC46431576EEC80
+3FC5D66E8464A33C3FC74222C5F86E083FC8C263B1F8F2553FCA4424A68B818C3FCB9DD67D77B175
+3FCCF05375440F413FCE65A542372FB53FCFF68DE5650A993FD0D9783343B0D93FD1AB4AED271D10
+3FD279D1545755633FD33640E712A7EE3FD3E7ECF341E2AF3FD497BC8121386A3FD550850FE20B96
+3FD6113442D7A9943FD6C71C2B4A166A3FD7731EA3C849B63FD81B64FBC9C5023FD8B11459EC2130
+3FD9041773C8CE6B3FD958AD6785CDB53FD99514B7DDC4B13FD9CD98DFC20D153FDA02233D329B4D
+3FDA6D733F277B943FDB119B7B6020023FDBD4B98551D29F3FDC99160CBAE92D3FDD5F0677F67017
+3FDE21581F6375BE3FDED140F2E02CF43FDF1BE4B22EBFA83FDF888C8314BFC23FDFF149CA6B4B22
+3FE031CA0BB4F3793FE0594056F427083FE09E5CB355A6D83FE0EDE37C4357B73FE13EEE09D8CA08
+3FE1843A14E8BF8A3FE1C310CE2AB67F3FE205146AA2AE4C3FE2459197DBC1793FE2888C1FEA4221
+3FE2E2FD1240596E3FE332BA6DE68B423FE363AAF24DC8713FE394271EE3C2E53FE3C3BE817E4089
+3FE3F375FBDA0F3F3FE4234CF5D1C83B3FE46B79EE7FE8AC3FE4C275E48FBAFF3FE51B43B61926F5
+3FE571FBD1F087EC3FE5C5F832608C833FE61865F56B33CD3FE669D3E5EC05563FE6BD86AB98C76E
+3FE7185C2DD0A91C3FE7740D4DABA9173FE7D541020BBCD13FE837DF34D25F9B3FE89E7B103F071F
+3FE900935A84C56D3FE9593ADF8DBAF03FE9B3CBC44E1C053FEA130FB5EAE6FC3FEA6BF1CA4760FA
+3FEABD5EDFA484B93FEB0C4514CFB4D93FEB5D28CEFCBF6D3FEBB519C1D4AC0C3FEC15380CA23D4F
+3FEC6E23DB2801E33FECC2E74C0CE69C3FED13CE6B97E6223FED67C99234631F3FEDBF05366C8EC5
+3FEE176BD8754C553FEE778A1B897C603FEEDBCB71795FCD3FEF3C20BEF36F8B3FEF9EED8EAEE3BD
+3FF0000000000000
+
+ 63FA9E97225157C743FB7C27F99DACF843FC0B6358266C3AF3FC520D2C8769075
+3FC93F9D66778EB23FCD404EF29555E13FD00E58815769553FD0CC179AE594303FD18F53B15F993A
+3FD257B5DAF6D6D13FD3134A64C69E2F3FD3CA127F0407813FD4779A65EF1B8A3FD51EEC9B8FD81E
+3FD5B9CC47273EA53FD65B39EB23EC953FD70A9CB4F0784D3FD7CC9516BDCACD3FD86EA318CBBD83
+3FD90382F79E93933FD98E06655E9AE13FDA1BBF74C55C303FDA9BCE36E023FD3FDB0E83B671408F
+3FDB801514143DA03FDBEFC48C351BDF3FDC4B0266AABDEC3FDCA0CEF407999F3FDCF1E7FABA5F72
+3FDD3E228D6489CE3FDD8B0A5C7351363FDDD039859758F03FDE10CD042B59173FDE4A2C64993F67
+3FDE81144EE81D963FDEB13870762D173FDEDF7FADC2FF423FDF0D3BC45D58DF3FDF37E775BDDEAE
+3FDF6355CBE47CEA3FDF8B711B4F102B3FDFB9B2591FC6A43FDFE2BB9130BF8D3FE0078822D5FC52
+3FE01B123B47A05D3FE03005B79E9D873FE042D36181675F3FE056D5F90848853FE06C033F92C32D
+3FE0827088BC34EE3FE09A89C0F893D83FE0B299F9FBF9043FE0CDFFCA6A1F393FE0E4F8B24451C0
+3FE0FBE80387D0C83FE117BD2161037A3FE135715746CCB43FE159B25049D6263FE1887CA1CC6580
+3FE1BDA2903AFDB43FE1EF013E69D72E3FE208D66D143A983FE2216286D034DB3FE23E8F247603E2
+3FE25C4691092C083FE278E5E7BF78DB3FE295191330B0383FE2CD0FF9668A7C3FE30A435336F94F
+3FE33DFF30F457993FE370BF7D0B4BD63FE3A4F7C081FFFF3FE3DF4AA7618B3D3FE41E3902B2D362
+3FE4620FCEA4A0CC3FE4AF15B062E8723FE507103CB4A0A33FE565B1580E66D33FE5C95CEF0777ED
+3FE62EB46D081F2E3FE69B77664336CC3FE70BF0A95B24683FE77B7C5B4F1AB53FE7F6228496C898
+3FE87CD953020B213FE919DF82E88EF13FE9BD0AF36BCCAF3FEA433CF2319AB03FEAC8A8158CE780
+3FEB535209C4D5623FEBC470D452F48D3FEC20D3BD0D253C3FEC88778A30AD243FECEE8C7CA4E940
+3FED4D4954BFCCE73FEDAD5F0135674B3FEE1090A4AA29D73FEEAE2360739FF03FEF49E74543C847
+3FF0000000000000
+
+ 73F8C632D57A4DB873F9AE245F9EFF31F3FA43686305FA4923FAABA206D778908
+3FB03F26A4F438C53FB2F00242B8FA483FB58BC4391AD89B3FB80CDBA3FF70EC3FBB007C09D74B23
+3FBDE13D4B2F545C3FC025230F492B273FC14258FDDA07923FC25FC579848F6A3FC39EEBC079C5BE
+3FC522B98079EE953FC6BF0EF4E9B4463FC82AFD7EB680143FC9B0CD925273DD3FCB41BC4B8D1511
+3FCCB88308657E953FCE1CB0FFF314F13FCF77E06E5A25203FD06E8908C450353FD12EDB7048D2C2
+3FD1F222511A27F53FD2BDA024123D2D3FD373D59C292A9B3FD42D5F7251883C3FD4C913328349ED
+3FD56DF63911EADC3FD6122258BF6FE83FD6D63664EA27D23FD77D162B4B708E3FD81BA6589C5DA8
+3FD89D896605C43C3FD8EBE8F4254B6A3FD9402B1F7D0D443FD99DEFA22249E43FDA02A0E922A58C
+3FDA4D1DDC5BB5E53FDA80B6A905AABE3FDAE187A2D311FC3FDB5FD1247E37993FDBBFA8B40EE04E
+3FDC17DED93284783FDC858B4A094AAD3FDCFC9C7448500C3FDD6FB9A6F0FB423FDE14BF4D378B79
+3FDEDD0A247653893FDFAD4845D0C73D3FE03C71E881E0993FE0A2905BDAF8833FE104B580FE3AAA
+3FE16A05EDE1F2473FE1CFF2AA9050C83FE230670651876F3FE28554B3D405A43FE2D53682AA791B
+3FE326D5623DF4603FE37C941FDEFA513FE3D7604C717E4B3FE42FF0AD941A203FE481A03390E4F8
+3FE4CE5EFBCDD8243FE513272DA162673FE563CB85583A203FE5BB0FD389F3BF3FE618E0EA0C5E34
+3FE67D0EE316AB763FE6E25819CD0D893FE73B513BDD8EA73FE7918B92B1A5693FE7EE367F769288
+3FE853B4F13B89FC3FE8BFEA90118AE93FE9192A78C67A1C3FE96F2F842B85493FE9BF7DF7A60FD5
+3FEA159160746F493FEA6CD1C0091A013FEAC99837802F043FEB21F3D93096463FEB79229543A3AC
+3FEBD277D24ED6CB3FEC2AEAE0124C633FEC818CCBDDDB6A3FECD2A0C5B5B1CE3FED2061C1C32165
+3FED76015CA33A1C3FEDC6E5477F64713FEE13E32C5A1D4F3FEE5FB90CE6F4063FEE85E2B9516021
+3FEEB5121BD191283FEEEF4AE5D1298F3FEF27C0A7AAF3C83FEF62B3F4D4E24C3FEF8A55AB5972AF
+3FF0000000000000
+
+ 83FA1D23AEE91CDEE3FA64DEE1E0BE5583FA8CBC3D24A57503FAAE9FFA9A232C6
+3FACFEBC7B5A41793FAF116B720999223FB09CA6F896F1893FB1E62DE0F063873FB4CF849E333C38
+3FB704D4F1A5EB223FBB17BDFAB0FDF43FBF06A71008CFE03FC14D631A773DFC3FC3057A241C9F82
+3FC448F0B9D1D5563FC51E80FB991D9D3FC61409BC3F21C83FC70CFC03BD2E133FC7CDFBA34B0A47
+3FC868279A35A8FB3FC9743A322EB35E3FCA925F5A7AF5F53FCBDF49B32ACB3F3FCD68B44B3FC8B7
+3FCEDB71DE6A8F313FD020643DC638F73FD0C50927A7DCCD3FD15D2E6648067A3FD1E9BA9C41C9FB
+3FD26F45A572F1D53FD2F249D75386673FD373BE55B539083FD3F220A2FA65BE3FD475A437D3772C
+3FD4F178E42743D53FD570E3E4B608463FD5F662F638CAC23FD6623EABD3227C3FD6CEC8C662C686
+3FD74103FE6D328E3FD7B74133DEB5C43FD8368F93EB90F93FD8B07281DFDF3F3FD92839D9B4480C
+3FD9960180A25DA43FD9F9F7369643713FDA5A215C997CAD3FDABC74121204E03FDB234FC3C9F0EE
+3FDB878DCDFC86C63FDBEB00E49AB56E3FDC4E4E6D0CC5BB3FDCB8588958A9AB3FDD266B2959DEF4
+3FDD997B8477B31B3FDE02BCC087AF2A3FDE68CD220502FF3FDECCD3461089C93FDF2969F3A19301
+3FDF81D31AC4BE7E3FDFD70A405417353FE016DC9F3C38153FE047237F01AB523FE069460F1BBDBD
+3FE08AA97338DDDB3FE0ABA18E8B3ECC3FE0CE2B6189ED073FE0F747E398E41E3FE127101D7C0DB1
+3FE1541AD46343C23FE17C96B6E304563FE1A4F0B489C8183FE1D106486DF3563FE20354490C9FFE
+3FE234871B5B17F93FE26190B16A7AA33FE28DB754CE60913FE2BC044433622A3FE2EEA45200109D
+3FE3250728FD6F3C3FE35BD103A6D0383FE38F31407B6CD43FE3C0A899571EF13FE3F5169D6962C7
+3FE42E7312575C1D3FE46D5456E769A03FE4ACF65D0472FF3FE4EEE89CE7666E3FE533CB568DA411
+3FE57D51F70EF4363FE5CB2376FA15713FE61E319DE053FA3FE674E3277C984B3FE6D54BE56DE094
+3FE740F833BA5FEF3FE7B648EFAABDEE3FE8442A30E81C063FE91CC68D1583EB3FEAC077A9BB0C2B
+3FF0000000000000
+
+ 93FB99D89FE92EA633FC3E2BD7A9017AF3FC6F5CEDCF802DD3FC8B08F227D0DFF
+3FCAC68A91012E2A3FCCA4809103753F3FCE7D4444502B1E3FCF8EB6BE459C733FD039A2A5611CB4
+3FD0AA8D500FDD263FD118348C8E95BE3FD176849492625E3FD1E976778369793FD28A7512F9E663
+3FD31EB99A93AC3C3FD3A6E74ECE2EA53FD4365B21E08D0E3FD4CC3605A087653FD5525F68B95815
+3FD5D068E5B2FA053FD64E2DFF3E8D7F3FD6CD5D8490FB093FD74322A9351F883FD7ADDD86F6B866
+3FD8109E4972128C3FD86ED2083EE1BA3FD8D42AE4169C7F3FD93BD41C6CFB573FD9A890B7F5EF1A
+3FDA1650AA70CCDC3FDA8678637548A63FDAF47C3C76DA0F3FDB5E150454FB233FDBC7AE84A69EDF
+3FDC2A98572B6EB23FDC89BA92038AF23FDCE13C62578C5B3FDD32B64FCCD65C3FDD8216979587AB
+3FDDC98D50D3C6813FDE03C5C2CEC3B73FDE4200D44EC8FC3FDE80C98B35DCA83FDEBE17566BADE2
+3FDF113AE687B1063FDF6D606A94868D3FDFCDB6DE1CF5313FE0164593A4E3873FE0445AAD61341B
+3FE073414348F2B43FE0A2FFA3B9255C3FE0CE46FE155A953FE0F623A6DC8FE33FE11EA046BFF134
+3FE14644BC7ADFFC3FE16E2FD7EACB0A3FE1943EE622A5BD3FE1B93A54468B333FE1E10C408CA865
+3FE20E86912A7B363FE23F340E40A29C3FE26FA167C306043FE29FFE6B646CA13FE2D424588E28D8
+3FE305A5C4592AA93FE3382821A8D25E3FE36A8986EC46473FE394E917D25D8C3FE3C0C6B002A0AC
+3FE3DDCC670E9D2E3FE3F73C656478863FE41410A866C1843FE43137C68403593FE44DFABD14E829
+3FE46B66F20DB1E73FE4981D385E562C3FE4C9C2B4027B6B3FE5022EF262D29B3FE534F1423AE396
+3FE56725B0BB58273FE59F678F80C4103FE5E0F674F9574B3FE6251C7B35AC553FE66C5396517CD6
+3FE6B740EF8618B13FE6FF3322DA71B13FE74A1A145C45223FE799CFDBF7C5DD3FE7C5AB6613BA50
+3FE7F659BD9690833FE82712AD3238983FE85A6A4EE0F4653FE8938ADA4F40F53FE8C8C33809C6BA
+3FE9000C8AD6A3BC3FE970BC7D4E0E5E3FE9FEE1C1846CBD3FEAC641E0E65EB93FEC6F2E5DCF0989
+3FF0000000000000
+
+ A3F847AE147AE14803F947AE147AE14803F9EB851EB851EC03FA47AE147AE1480
+3FA99999999999A03FAEB851EB851EC03FB1EB851EB851F03FB47AE147AE14803FB70A3D70A3D710
+3FB99999999999A03FBC28F5C28F5C303FBEB851EB851EC03FC0A3D70A3D70A83FC1EB851EB851F0
+3FC33333333333383FC47AE147AE14803FC5C28F5C28F5C83FC70A3D70A3D7103FC851EB851EB858
+3FC99999999999A03FCAE147AE147AE83FCC28F5C28F5C303FCD70A3D70A3D783FCEB851EB851EC0
+3FD00000000000043FD0A3D70A3D70A83FD147AE147AE14C3FD1EB851EB851F03FD28F5C28F5C294
+3FD33333333333383FD3D70A3D70A3DC3FD47AE147AE14803FD51EB851EB85243FD5C28F5C28F5C8
+3FD666666666666C3FD70A3D70A3D7103FD7AE147AE147B43FD851EB851EB8583FD8F5C28F5C28FC
+3FD99999999999A03FDA3D70A3D70A443FDAE147AE147AE83FDB851EB851EB8C3FDC28F5C28F5C30
+3FDCCCCCCCCCCCD43FDD70A3D70A3D783FDE147AE147AE1C3FDEB851EB851EC03FDF5C28F5C28F64
+3FE00000000000043FE051EB851EB8563FE0A3D70A3D70A83FE0F5C28F5C28FA3FE147AE147AE14C
+3FE199999999999E3FE1EB851EB851F03FE23D70A3D70A423FE28F5C28F5C2943FE2E147AE147AE6
+3FE33333333333383FE3851EB851EB8A3FE3D70A3D70A3DC3FE428F5C28F5C2E3FE47AE147AE1480
+3FE4CCCCCCCCCCD23FE51EB851EB85243FE570A3D70A3D763FE5C28F5C28F5C83FE6147AE147AE1A
+3FE666666666666C3FE6B851EB851EBE3FE70A3D70A3D7103FE75C28F5C28F623FE7AE147AE147B4
+3FE80000000000063FE851EB851EB8583FE8A3D70A3D70AA3FE8F5C28F5C28FC3FE947AE147AE14E
+3FE99999999999A03FE9EB851EB851F23FEA3D70A3D70A443FEA8F5C28F5C2963FEAE147AE147AE8
+3FEB33333333333A3FEB851EB851EB8C3FEBD70A3D70A3DE3FEC28F5C28F5C303FEC7AE147AE1482
+3FECCCCCCCCCCCD43FED1EB851EB85263FED70A3D70A3D773FEDC28F5C28F5C93FEE147AE147AE1B
+3FEE66666666666D3FEEB851EB851EBF3FEF0A3D70A3D7113FEF5C28F5C28F633FEFAE147AE147B5
+3FF0000000000000
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2013_I1208923/fnl2332d.1jet.R-fastprod.run
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2013_I1208923/fnl2332d.1jet.R-fastprod.run (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2013_I1208923/fnl2332d.1jet.R-fastprod.run (revision 1772)
@@ -0,0 +1,174 @@
+NNLOJET_RUNCARD
+R-7TeV ! Job name id, must be less than 10 characters
+1jet ! Process name
+@EVENTS@ ! Number of events
+1 ! Number of iterations
+@SEED@ ! Seed number
+.false. ! Warmup
+.true. ! Production
+CT14nnlo ! PDF set
+0 ! PDF member
+antikt ! Jet algorithm, accepts 'kt', 'cam' or 'antikt'
+0.7d0 ! Rcut
+.false. ! exclusive
+0 ! Heavy particle decay type
+.1e-7 ! Technical cutoff y0
+.false. ! angular averaging of the phase space, default to true
+2 ! Virtual Integration method, use 2 if you're not sure
+all ! RR a/b region flag. Accepts 'a','b' or 'all'.
+0 ! set to zero for MC, 2 for point test
+.false. ! print max weight flag
+.true. ! momentum mapping and PDF storage flag
+.true. ! colour sampling flag
+.false. ! explicit pole check flag, stops integration when set to true
+
+PHYSICAL_PARAMETERS
+7000d0 ! roots
+125d0 ! Mass of the Higgs Boson
+0.004029643852d0 ! Width of the Higgs Boson
+91.1876d0 ! Mass of the Z Boson
+2.4952d0 ! Width of the Z Boson
+80.398d0 ! Mass of the W Boson
+2.1054d0 ! Width of the W Boson
+173.2d0 ! Mass of the Top Quark
+1.41d0 ! Width of the Top Quark
+4.18d0 ! Mass of the Bottom Quark
+0d0 ! Width of the Bottom Quark
+1.275d0 ! Mass of the Charm Quark
+0d0 ! Width of the Charm Quark
+
+! UNIT_PHASE
+
+SELECTORS
+ select jets_pt min = 114 max = 2116
+ select jets_abs_y max = 2.5
+ select njets min = 1
+END_SELECTORS
+
+
+
+HISTOGRAMS
+
+COMPOSITE > xptj0_y1 [114.0,133.0,153.0,174.0,196.0,220.0,245.0,272.0,300.0,330.0,362.0,395.0,430.0,468.0,507.0,548.0,592.0,638.0,686.0,737.0,790.0,846.0,905.0,967.0,1032.0,1101.0,1172.0,1248.0,1327.0,1410.0,1497.0,1588.0,1784.0,2116.0] grid=ptji_incl_y1.fast
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y2 [114.0,133.0,153.0,174.0,196.0,220.0,245.0,272.0,300.0,330.0,362.0,395.0,430.0,468.0,507.0,548.0,592.0,638.0,686.0,737.0,790.0,846.0,905.0,967.0,1032.0,1101.0,1172.0,1248.0,1327.0,1410.0,1784.0] grid=ptji_incl_y2.fast
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y3 [114.0,133.0,153.0,174.0,196.0,220.0,245.0,272.0,300.0,330.0,362.0,395.0,430.0,468.0,507.0,548.0,592.0,638.0,686.0,737.0,790.0,846.0,905.0,967.0,1032.0,1101.0,1172.0,1684.0] grid=ptji_incl_y3.fast
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y4 [114.0,133.0,153.0,174.0,196.0,220.0,245.0,272.0,300.0,330.0,362.0,395.0,430.0,468.0,507.0,548.0,592.0,638.0,686.0,737.0,790.0,846.0,905.0,967.0,1248.0] grid=ptji_incl_y4.fast
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y5 [114.0,133.0,153.0,174.0,196.0,220.0,245.0,272.0,300.0,330.0,362.0,395.0,430.0,468.0,507.0,548.0,592.0,638.0,686.0,905.0] grid=ptji_incl_y5.fast
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+END_HISTOGRAMS
+
+SCALES
+ muf = ptj1 mur = ptj1
+ muf = 2.718281828 mur = 2.718281828
+ muf = 4.48168907 mur = 4.48168907
+ muf = 4.48168907 mur = 2.718281828
+ muf = 2.718281828 mur = 4.48168907
+ muf = 12.18249396 mur = 2.718281828
+ muf = 2.718281828 mur = 12.18249396
+END_SCALES
+
+!####### SYNTAX ######################
+!##
+!## REWEIGHT {observable-name}**{val_power}
+!##
+!#####################################
+
+! REWEIGHT ht_part**4
+! REWEIGHT ht_part**1.4 !# DB
+REWEIGHT ht_part**6.5 !# KR
+
+CHANNELS
+ R
+END_CHANNELS
+
+SETUP
+END_SETUP
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2013_I1208923/1jet.RV-7TeV.y.1e-7.vRa
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2013_I1208923/1jet.RV-7TeV.y.1e-7.vRa (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2013_I1208923/1jet.RV-7TeV.y.1e-7.vRa (revision 1772)
@@ -0,0 +1,198 @@
+
+ 13EE5166ACF8EC6383EF810B589BB2AC83F1B835F6764E8A83F3E0947C5E72B40
+3F501AA7CAD876F93F5985C8D7A2606E3F61F924C78C56603F68291DF3ED25DC3F6FA3B79688D9B5
+3F73C279B5931F553F77C72783C2A3E83F7BEB71E3F852A43F8014EE4C0885683F8239EF9815E0B0
+3F846CE03B04F4473F86B9657BCE6A893F8926A96BC411823F8BAC90E6817D743F8E3C8604FEC0CD
+3F906F14BE0A718B3F91C5BB89A2AA923F9320BD52C000C73F9483363E96CBE53F95F08944CD2133
+3F976D45B2772C813F98F3DAF582B0513F9A844F3AB9C02A3F9C1D4C063C95C63F9DBEBC17629353
+3F9F6BB6B74B27383FA08E37751D82C23FA1622EC65A802B3FA23B1F61DCEB6D3FA31A46C3D8486E
+3FA40C4471B453843FA50328CF3B2F443FA5FE54A84C008C3FA6FFF63FE250CC3FA8099B5E6CCB1C
+3FA91C676CF3E0F53FAA362B1E91F5B73FAB5713735075D13FAC7E905688FF613FADAAE17020B11B
+3FAEDEAC8410F6633FB00D1431BB8F233FB0B042D49222E13FB15741599DE3ED3FB2018E94ED1E56
+3FB2AF3555584C023FB36078D5436DAD3FB41630EB8CA98A3FB4D24EEF69C3873FB5908DF68E9E0C
+3FB6561841A160D83FB71F6E866F22663FB7F169816D17E83FB8C607F1F70CDD3FB9A0651E78E735
+3FBA8139D9D06CA13FBB687445732EFF3FBC55EC4C9CD6D93FBD49D3B3B048463FBE465183665CA2
+3FBF48CC32AD21493FC02954F1A9BD973FC0B2AFE1F23B6F3FC13F5F9156CE943FC1D04006D7D1A0
+3FC2657B0A0ABDC53FC30052137A2A933FC3A0A580CF27E03FC445E1F92E89743FC4F0DE7123EBAF
+3FC5A1B00016B2243FC658588CE0EC543FC71489393317AA3FC7D76AD1B94BF83FC8A2481111F57A
+3FC97557367106083FCA5237812FEA4E3FCB39E86B0B2E183FCC2CA880D43B613FCD2A993EFFCC32
+3FCE33A2336D0FA33FCF49FCD0FFFC033FD0377CB7C0341B3FD0D37EB59A2B4C3FD17A0E42E2E3C4
+3FD22B4FF667E5FE3FD2E89D17CAACF13FD3B68E27E86F2E3FD499F0EA594A0D3FD595A7BBAB2D84
+3FD6AF8FA161312F3FD7FA95B7CF16803FD97275A829131B3FDBA36AA7602C9C3FE1BD78859C46AE
+3FF0000000000000
+
+ 23FB7A722A234199B3FC0D370DE7965CB3FC5CBC44F306A253FC9EA3E77E0EE69
+3FCDF14E3398FA0A3FD0E03F716DCBE13FD2A203CD7B213E3FD454DB04CB2E573FD5F24E45F693AB
+3FD767DE5948C7DF3FD8CDD5115F77653FDA29BDF6EAAED63FDB83F708E401B53FDCD3268ACBB754
+3FDE17D6F682C7553FDF3E13C1DDF2843FE01AA70C44CCF03FE08004E6AB518A3FE0DBF76505C9F3
+3FE1330C6150E57C3FE183B31C9B633A3FE1D2F9D59C8B6F3FE22337E11AFF533FE274A5856E5E0A
+3FE2BFD9D80F84CF3FE307FB26EB0FE73FE34F54E49C02C63FE39AEDF259E2783FE3E58A99345439
+3FE42BAAB4D8D4343FE471648AF81C383FE4B519E3C47CCA3FE4F8EFF27B754C3FE53B01A75061A7
+3FE57DC401C058733FE5BE9EB2B5BC683FE5F653778DE5603FE62DA6A6FB369F3FE6623D5BCA71BC
+3FE69A7E2EB33F923FE6D43F71A7FEC83FE70BE6BFE945153FE74352AF8C432D3FE778E0F542713A
+3FE7AE848D9F3C8D3FE7E2B45F452D403FE814DD2C4DB6E83FE846738D9F4C5E3FE878CD7EA10A33
+3FE8AA6AE8A008B23FE8DAB2C0DAFDDA3FE907A9C1F060F53FE9304BDF3ECE3F3FE9587E925D6C89
+3FE9802564192BD63FE9AC3B5389303C3FE9D8AD861E7DBA3FEA03E280BCC94C3FEA2EF0D9FAE937
+3FEA599D105801323FEA81E586F1A37A3FEAA9F7AE77D6253FEAD0605938BE653FEAF772C91DB4E8
+3FEB1DC024F171EA3FEB442C9F0CA53F3FEB6A821D1261C33FEB8F63D78A1B2F3FEBB3EC8C3CE373
+3FEBD853890546083FEBFCD6797A932D3FEC212F121B9D5E3FEC44DAC55ED7483FEC6840A003588E
+3FEC8B36F01405833FECAE1B2E947EB13FECD0D5A8AE22023FECF36F6BD4507A3FED156D8CD74617
+3FED36B332F892333FED57BDED99949B3FED787E73A5E59A3FED99008A2054443FEDB9659475CD9C
+3FEDD9DD5466BD953FEDFA3AA609A3553FEE1A0AF1ABED993FEE39A1E95393583FEE5949EEAA14F3
+3FEE7937926E7A5C3FEE997D1146D0B13FEEBA0C50E3767A3FEEDAE65F527C163FEEFBF5FF1EA042
+3FEF1DEB1B1AADCD3FEF4084F0AE43163FEF65F713CE5FC23FEF8B2B2FD859973FEFBFEDEF969320
+3FF0000000000000
+
+ 33FC8AC8D1749BA3F3FD0538C1C42E3B23FD26205E5F5259F3FD3AC145F8D5912
+3FD4BBE4F382F0CC3FD595D3D6F4E5663FD642425AD950C13FD6D9F61AEF3D513FD75B7861959A3E
+3FD7CF3394CAA9113FD835FD6B63C6543FD88E79FFC5B2EE3FD8DF0CA99BDEA73FD92A192C2D8429
+3FD97236F9A0880A3FD9B72D9117A2C33FD9F7FCEF612C9B3FDA3586F6CEDF753FDA70656911B59E
+3FDAA879362398B63FDADD8EE04D94C83FDB0FD5051CD6383FDB3FE9C2C97F913FDB6E8005694827
+3FDB9CBA5EAEB27F3FDBCA3C0CD3AD4F3FDBF741963669B93FDC224A5357CC983FDC4CB78E083A44
+3FDC7790F750959A3FDCA366E4D98E943FDCD05E391639DA3FDCFDBF0FECB8D43FDD2A31007F46E2
+3FDD55C9ABAA9E053FDD82AF0B7FEBC73FDDAEF746A696183FDDDCC6460E9D013FDE0979C9B651B3
+3FDE385461E8B4193FDE680E3BCB61463FDE96A46D5F29ED3FDEC6FB1BBF968A3FDEF5191ED40B3D
+3FDF23B3675F1FDA3FDF5367EAC4DE1E3FDF81069193BE7B3FDFB2EA2B3CDAA93FDFE3AAAE5449C7
+3FE009DE41286E0A3FE02125EA9DE7E43FE0368977B5142D3FE04CA7E4ACC7E13FE060F6391941A3
+3FE07744D97672773FE08D55696E84DD3FE0A4B87537FDE73FE0BCB957F638DA3FE0D397D4C2603D
+3FE0E85689F05DEA3FE0FC863E4C30243FE11061042865353FE1265030B637513FE13CBB7D0C0FBD
+3FE152EA89420DA73FE16917BD5385973FE17F1DE72D57F33FE1954BFC8ADA403FE1AB319DD05100
+3FE1C155454C2CD63FE1D7563024D7FE3FE1ED53FABD1F9C3FE203555E9CF0243FE21990795C1420
+3FE23040FACE29E03FE247AF4D639B0D3FE25F87F0E171F63FE27843C85BE0383FE29207DABC5FD6
+3FE2ACD012D384713FE2C8B82BFF46C03FE2E5EECE7C3C703FE304AD65A596FD3FE3255FEFDB2C8F
+3FE348546134459B3FE36DB9C68A908E3FE395C434BCCE3F3FE3C0F00C550ABC3FE3F0951044B892
+3FE425F29AA75EAE3FE46238681AFBB03FE4A57BC172F00A3FE4ECB671309B653FE53E39AA8BC141
+3FE59802A9F28B953FE619D81C9F33C03FE6C113905297193FE7C64718DA8E0C3FEA0367ED9B97A8
+3FF0000000000000
+
+ 43F86F859918304C13F976F1B1267FD6E3FA123A448812A8E3FA6BA40A52F5030
+3FAC102A07CE100B3FB0C9732AFC63703FB384A44471360F3FB5CD328A2D51B23FB8227BA751A92A
+3FBA6C567D68D6C93FBCDF44B073C3043FBF69870BA4FE433FC0F23432A590353FC2304A67DF157E
+3FC36E0152BBABD43FC4AD735B80A4A93FC5F09B979E75063FC736294B61EFC23FC87C05F1623DEB
+3FC9C44ED44B16063FCB000317028C7A3FCC3F2B527C36D03FCD7BFB61DD2F673FCE95A3F0F3A525
+3FCFB0CAE048829D3FD066E6A1CA6E833FD0F3E9E09B8FF13FD185A2E1441F3C3FD2191AF7C8F547
+3FD2B146AAEB8F7F3FD35A454251FCA73FD3FBD63515578E3FD49C7C28F0F05B3FD53CA6986AADBF
+3FD5DC5E53F750273FD677A388658C403FD71149A286DE3D3FD7ACF7EBD9AED93FD84D888F0859D1
+3FD8F0CED28C9E3D3FD99698C1DA6F853FDA3B2AEA593BC33FDAE4AA2BBBA1D33FDB8A86E7DA9494
+3FDC33D12ABA8E953FDCDFE7E92676933FDD8D64F9A0828E3FDE442AE773BF4C3FDEFA2158197479
+3FDFB10EAA1F1C803FE03430C94558373FE08CF3787BCA713FE0E68CC53D87AB3FE13D95583F51AF
+3FE194096D837CF23FE1EC5DA54DFF2B3FE241C9F0DB12663FE2976B67FBD77C3FE2EBCC63E14E8B
+3FE33F76060514853FE391D2903861BD3FE3E3999DE5D4983FE434D840BD995E3FE4864F29368FF9
+3FE4D7532C4AB0493FE52847FD8BCD513FE5783449574EBA3FE5C823066F74D23FE6163EB95EE010
+3FE663E4DFC46FBF3FE6B24D41DCE1033FE702CAC23F7CDD3FE75537D2F282373FE7A51B38975EB6
+3FE7F1DAAE47F29B3FE83E8DD4F80C393FE88C18BED798923FE8DC9A56A8B4E23FE92CAB3FD4706E
+3FE97D43B492B3343FE9CFB11A084D6F3FEA208D477D57DA3FEA706AB4F596023FEAC09D5B8F90C5
+3FEB10CF4F38E9B73FEB618F16DB329B3FEBB0BA5F3B218E3FEC010FA15FBE203FEC52BE25CB70DA
+3FECA509AFAEBB0D3FECF8E5B4DCB9DB3FED4D63295B49593FEDA2DA6994DC5B3FEDF9711D202304
+3FEE5223682CFA683FEEAB9C9BD75DF53FEF03A53AE6E8BB3FEF58329A7D73683FEFAB0C8F7C29BA
+3FF0000000000000
+
+ 53FA423D430B30D013FB2D27FD628896B3FB8EA2C6BA72D2E3FBEAABD95E7E5B9
+3FC1C501BC1818503FC40986A68952863FC62072DF804F4C3FC7FFFFDC7EA2903FC9AF3D5945A3F3
+3FCB3F3529B883043FCCB85867AE5AC83FCE2290B16BBC743FCF785BB018924C3FD0612F10B07577
+3FD0FE20B3BB0C8F3FD18FE64A2272173FD21E5D2E7E7B183FD2A4CECF2961AF3FD3254F368130B8
+3FD3A6489114C0693FD41FF0F48207083FD4940041A31B393FD5043C57C1D1F53FD570F882E9D5F8
+3FD5DC8EF4E1538F3FD648FDB33AF9BA3FD6B1E969DEC7A33FD718B5E6A977CA3FD77CF1B169019D
+3FD7DF54E76D1EB93FD83F95EEC08F663FD89D66865A43F63FD8FB7B295B8C283FD957894BA13F73
+3FD9B0D1380314533FDA06D614C298703FDA57E7D8959C293FDAA994317544C03FDAFDFF36022990
+3FDB53BBF5B921413FDBA89C4B5615FA3FDBFB7976C2F5663FDC4D8FFF7DA6BB3FDC9C17A58C4F46
+3FDCE2C83B7FCB463FDD25573ADA36CC3FDD64E79AFBFE1E3FDDA560683BE65B3FDDF42A6B882A74
+3FDE4365D5E1B8563FDE91F2250CBB553FDEE04E941F581E3FDF2E79BE0A59AF3FDF7C818315F18B
+3FDFCA39C010F3F93FE00B8870D0B5673FE031D13342D48B3FE0584CD5D608E03FE07EAF119BAF54
+3FE0A4FA4CF599DE3FE0CAC75EBD3EC33FE0F128A7AC06943FE117BA465C64B93FE13E1337F590CC
+3FE163A43582123D3FE188C69B6DC08E3FE1AE43A2AA88743FE1D479EC0CE6013FE1FB7949C98831
+3FE2230EB0ECF53E3FE24AD6A9C670BC3FE272ED829CAE323FE29BD8FBC692573FE2C57A8F0E9742
+3FE2EF9D7981FA973FE319BCFA458FB03FE343D26F859DFF3FE36E8650EB47F93FE39A1DBD462A8F
+3FE3C74052DD8B123FE3F3E6B5BC1F893FE41E4816D8D1443FE449401D6354263FE4771539B2A799
+3FE4A9FEE387FF063FE4DF110A1CED093FE515774F73C3F03FE54E2CD124A9713FE588ED1ACF3D2F
+3FE5C66D5EED90F63FE60740863D0E5B3FE64D0DEF791B133FE69A4AF68EB0623FE6F00D44DF8D68
+3FE7525924C521A93FE7C6A6D88D86AD3FE8572F581CCBEF3FE92ED149BFD9843FEB0E39011B96E2
+3FF0000000000000
+
+ 63FBFC6FB90D6DFD83FC53EAB520EDBC93FC81AA6A26504E93FCA4A6B355A2AF5
+3FCC22A5D9E949483FCDBF3E42260E483FCF4007359A50283FD0485C68152DE73FD0E2B4084EEE32
+3FD170952BBB6B363FD1FE6CAABE807C3FD286993A592D133FD30894B74A15CD3FD3872DEE40C646
+3FD400DD6E444DDA3FD4756EB0444BE73FD4E74188BAD6693FD55591A657D1CD3FD5C0942866649E
+3FD6271350A53E653FD68627709EA3B73FD6E159F15336A03FD73CC5265AFF5A3FD79B5480D94570
+3FD7F9DF33039A9B3FD85699009114273FD8B57B54A259223FD90656044378FE3FD9568A189DD3E9
+3FD9A557720F8E8B3FD9F533AD33D5B03FDA4E6DBD1635503FDAA34904B3E7BD3FDAF7A059C9F062
+3FDB4A7DF01A392F3FDB9E8455F434B13FDBF16AF5B765EC3FDC4027FDAFCA583FDC92CB800108C4
+3FDCE1B76F8B1CE53FDD3240951B36073FDD826F5F874BCB3FDDD34DB79AB02B3FDE243D18DE955A
+3FDE740BA8415E603FDEC2C9E4A03D403FDF0FFD4CD85DE23FDF5EA49E35E0463FDFABBFC658B5B9
+3FDFFA325F81694B3FE025349DE818D63FE04B207E2E10A73FE07012883A2A2A3FE0958DAC855720
+3FE0BD5989BF927E3FE0E56E3A1311353FE10D54153004E73FE1358CFDD6A5AE3FE15D407E9DC6A9
+3FE183286B533E903FE1AA1FA0A31F8C3FE1D1BBC5CA8F3D3FE1F9DBBCE7C0C23FE223E398E1109A
+3FE24DCC4F0D88CE3FE27314A1554F3C3FE297807C7EC4043FE2BB100E61A4F73FE2E411AF41AC18
+3FE310A1E3BD59A73FE33BC6085CA0E03FE366BEDE37452F3FE391F3CA4997563FE3BEEEF142D9A1
+3FE3ED5AFB055CD23FE41C355A344E5B3FE44B7DA819988E3FE47B2930DE59923FE4AC4B594C0E59
+3FE4DF329D6A4A153FE513DE3C1296B93FE5494E014D03603FE5806976E86B5B3FE5B95A511B474E
+3FE5F40F4EA131463FE630B4430607C63FE66FCF64D6861D3FE6B0E72629C8753FE6F59533DBA2A3
+3FE73D6AE269AC6D3FE78AF6CE3488963FE7DCEB9F8C4BED3FE838293C6A73E13FE8984630D58DC2
+3FE8FE4A776B5CE53FE96F888A9E7F053FE9F71DAB96CB323FEA9F98CAD3CF603FEC0CF5F5F98699
+3FF0000000000000
+
+ 73F886085E0D16DD83F97C34F46CB9E213FA1C11DA557E79C3FA7827BA379F8A0
+3FAD57FB0E4449933FB17A4C228EE2F63FB43800C144483D3FB6D7ADB86FCE183FB9906EC4B62ED5
+3FBC50343246960A3FBF3B05FA3230443FC11634144914483FC2823F0529E86A3FC3E80B068AACAC
+3FC52F69B2F517A73FC67C6EB698C7EA3FC7C94F710160013FC931BD086AE8523FCAA33E96069FA6
+3FCC10282519C4713FCD7DEFBB4C6BE23FCED7EDD2047FE93FD01C68C30727C73FD0CC22C86291C2
+3FD185C2DA4F3A9A3FD243D0188ABE2F3FD2E42645D004DD3FD38932591B43CB3FD42D04E0D83386
+3FD4DB3D6F6A5D603FD598F6E6DEE9553FD65086638D72ED3FD704E4C92311863FD7B8C21B18BA31
+3FD86DBEC26C3DD43FD92437D2C092D33FD9DC78F1F284AA3FDA926103AABAEB3FDB42B7E958B3DB
+3FDBF105F146C18B3FDC9F7B2681B0D03FDD52BD4E50350E3FDE07FDB7846A553FDEBB62559279BF
+3FDF6C89A2060D973FE00EA575B3763A3FE0673576AE82653FE0BFE5B81DAAD63FE10E7D2B291DAA
+3FE15DFDC21B48623FE1AD5B65C046203FE201BF3DF7010E3FE258A3B0B9888E3FE2ADF929275CB1
+3FE30407AB53312F3FE359E2D7F2993C3FE3AD471737B0613FE3FF8E324ED3693FE451D81300DB77
+3FE4A5B67CB0CA8F3FE4F93AF3BBE86D3FE54BA3D072ACC43FE59D7300D8A9473FE5EF832862EEA3
+3FE641D718FC2AAF3FE69341AFBAE4593FE6E3AFA28C1E9A3FE733EDCF1B76EB3FE78518B8AF9B5B
+3FE7D6D39C6A7D5E3FE8269DFC43B90C3FE8753CE77CAB223FE8C4144F7D28083FE910A190F09466
+3FE95BA5F47243E03FE9A64E66B50E163FE9EE8782824FE23FEA36C32F7C62DF3FEA7F562EA3C9F1
+3FEACA27B66E35283FEB16561F3019A73FEB61D58256EF863FEBACEB7B0A85423FEBF6EAC55D30B5
+3FEC3F636AEA65C73FEC86ABE92916293FECCD466FDC3FE33FED13548AC9D3EA3FED588E5CC959F2
+3FED9CC60DFAFA683FEDE0215DEDA96D3FEE2308E26B97233FEE64F36F8894FB3FEEA53E46FF2C9D
+3FEEE4E0FB5D68BB3FEF23152AD474123FEF5F06EEBAEC9E3FEF9986E1895D953FEFCE3FA2162A22
+3FF0000000000000
+
+ 83F8904D49B4929273F97D0EDE03D9B0D3FA1B3F3CAEB391B3FA77C84060B7BED
+3FAD7A9646576D263FB1C7A3F13933603FB4CE9257950B663FB7AF034E8C49BF3FBA8399A680583C
+3FBD597C38139B733FC01BD54902257A3FC191F5EBA3EB803FC308E8739244EF3FC482113BDAF330
+3FC5FAE253768AA13FC77962F1E2E4E43FC8DA4C1F58E5143FCA212841086BD43FCB6D8ECAEB564E
+3FCCBB258132FCDE3FCE29FC16280EEC3FCF97057350014C3FD07F22A6888B733FD1366A0C3FE0E2
+3FD1EB97BBB98EE23FD29323BEF7C64B3FD33BCB3088EB2F3FD3E7B3778639A23FD49D1A3D742483
+3FD553A1E8AB26F13FD605D7E7A91F063FD6B7539FBF97C43FD76AEA16AC197B3FD821F5AE8AFE29
+3FD8D851B110DC8F3FD98A5E5BDFE06C3FDA3AA96CFF05EC3FDAE3FEC0B86A663FDB86E1BC3F4763
+3FDC2B6813BF0A593FDCD2C2C766A4FB3FDD85E249AC64543FDE38CEB4472C303FDEE772D15CDE02
+3FDF95A70ACBB5823FE021F2138874DA3FE077084C670FFB3FE0CDC275A36FD53FE122D3EF023070
+3FE17B31F42B9AB43FE1D093F78DE4503FE22519A5F924D73FE276D6ECCD53053FE2CB1C8419EAA6
+3FE320AB4349FD803FE376EFC2AA33503FE3CAAAA182F7D33FE41C622E8A864C3FE46850636E914D
+3FE4BA71F1333B313FE50A6944102C643FE55C11EA3355873FE5AF4FA2BA9ABD3FE602EA11773B33
+3FE6565532D878FA3FE6A879312BB70A3FE6F92E28D05B8A3FE748F3CBECA05A3FE79812324ED0B8
+3FE7E6C1D61F30953FE83559B2C6271E3FE8854FB7C00D793FE8D54F469801223FE9252B1982C86D
+3FE97400B0A561AF3FE9C2C1E5901CFD3FEA0EAA4009F9B93FEA56641A01C87C3FEA9AF55F4C14C0
+3FEADE04C753E0C13FEB27DADC9BC2F03FEB7160684D48AE3FEBBC82447AD50B3FEC0689F6D9EA1F
+3FEC4E4301330CD63FEC9794DC40C5673FECDEFBD1D016283FED251BF07AAF993FED6A17D9BAF6AD
+3FEDAE74F4E6CEDD3FEDF2D5E6FA381A3FEE3626713A09FC3FEE77E6B097A1A03FEEB54DE7556B7E
+3FEEEE1FC1A7C1A63FEF253DD543E2943FEF5ACC95F2E6283FEF97099985B87B3FEFCD07A614050B
+3FF0000000000000
+
+ 93F847AE147AE14803F947AE147AE14803F9EB851EB851EC03FA47AE147AE1480
+3FA99999999999A03FAEB851EB851EC03FB1EB851EB851F03FB47AE147AE14803FB70A3D70A3D710
+3FB99999999999A03FBC28F5C28F5C303FBEB851EB851EC03FC0A3D70A3D70A83FC1EB851EB851F0
+3FC33333333333383FC47AE147AE14803FC5C28F5C28F5C83FC70A3D70A3D7103FC851EB851EB858
+3FC99999999999A03FCAE147AE147AE83FCC28F5C28F5C303FCD70A3D70A3D783FCEB851EB851EC0
+3FD00000000000043FD0A3D70A3D70A83FD147AE147AE14C3FD1EB851EB851F03FD28F5C28F5C294
+3FD33333333333383FD3D70A3D70A3DC3FD47AE147AE14803FD51EB851EB85243FD5C28F5C28F5C8
+3FD666666666666C3FD70A3D70A3D7103FD7AE147AE147B43FD851EB851EB8583FD8F5C28F5C28FC
+3FD99999999999A03FDA3D70A3D70A443FDAE147AE147AE83FDB851EB851EB8C3FDC28F5C28F5C30
+3FDCCCCCCCCCCCD43FDD70A3D70A3D783FDE147AE147AE1C3FDEB851EB851EC03FDF5C28F5C28F64
+3FE00000000000043FE051EB851EB8563FE0A3D70A3D70A83FE0F5C28F5C28FA3FE147AE147AE14C
+3FE199999999999E3FE1EB851EB851F03FE23D70A3D70A423FE28F5C28F5C2943FE2E147AE147AE6
+3FE33333333333383FE3851EB851EB8A3FE3D70A3D70A3DC3FE428F5C28F5C2E3FE47AE147AE1480
+3FE4CCCCCCCCCCD23FE51EB851EB85243FE570A3D70A3D763FE5C28F5C28F5C83FE6147AE147AE1A
+3FE666666666666C3FE6B851EB851EBE3FE70A3D70A3D7103FE75C28F5C28F623FE7AE147AE147B4
+3FE80000000000063FE851EB851EB8583FE8A3D70A3D70AA3FE8F5C28F5C28FC3FE947AE147AE14E
+3FE99999999999A03FE9EB851EB851F23FEA3D70A3D70A443FEA8F5C28F5C2963FEAE147AE147AE8
+3FEB33333333333A3FEB851EB851EB8C3FEBD70A3D70A3DE3FEC28F5C28F5C303FEC7AE147AE1482
+3FECCCCCCCCCCCD43FED1EB851EB85263FED70A3D70A3D773FEDC28F5C28F5C93FEE147AE147AE1B
+3FEE66666666666D3FEEB851EB851EBF3FEF0A3D70A3D7113FEF5C28F5C28F633FEFAE147AE147B5
+3FF0000000000000
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2013_I1208923/fnl2332d.1jet.R-fastwarm.run
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2013_I1208923/fnl2332d.1jet.R-fastwarm.run (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2013_I1208923/fnl2332d.1jet.R-fastwarm.run (revision 1772)
@@ -0,0 +1,174 @@
+NNLOJET_RUNCARD
+R-7TeV ! Job name id, must be less than 10 characters
+1jet ! Process name
+@EVENTS@ ! Number of events
+1 ! Number of iterations
+@SEED@ ! Seed number
+.false. ! Warmup
+.true. ! Production
+CT14nnlo ! PDF set
+0 ! PDF member
+antikt ! Jet algorithm, accepts 'kt', 'cam' or 'antikt'
+0.7d0 ! Rcut
+.false. ! exclusive
+0 ! Heavy particle decay type
+.1e-7 ! Technical cutoff y0
+.false. ! angular averaging of the phase space, default to true
+2 ! Virtual Integration method, use 2 if you're not sure
+all ! RR a/b region flag. Accepts 'a','b' or 'all'.
+0 ! set to zero for MC, 2 for point test
+.false. ! print max weight flag
+.true. ! momentum mapping and PDF storage flag
+.true. ! colour sampling flag
+.false. ! explicit pole check flag, stops integration when set to true
+
+PHYSICAL_PARAMETERS
+7000d0 ! roots
+125d0 ! Mass of the Higgs Boson
+0.004029643852d0 ! Width of the Higgs Boson
+91.1876d0 ! Mass of the Z Boson
+2.4952d0 ! Width of the Z Boson
+80.398d0 ! Mass of the W Boson
+2.1054d0 ! Width of the W Boson
+173.2d0 ! Mass of the Top Quark
+1.41d0 ! Width of the Top Quark
+4.18d0 ! Mass of the Bottom Quark
+0d0 ! Width of the Bottom Quark
+1.275d0 ! Mass of the Charm Quark
+0d0 ! Width of the Charm Quark
+
+UNIT_PHASE
+
+SELECTORS
+ select jets_pt min = 114 max = 2116
+ select jets_abs_y max = 2.5
+ select njets min = 1
+END_SELECTORS
+
+
+
+HISTOGRAMS
+
+COMPOSITE > xptj0_y1 [114.0,133.0,153.0,174.0,196.0,220.0,245.0,272.0,300.0,330.0,362.0,395.0,430.0,468.0,507.0,548.0,592.0,638.0,686.0,737.0,790.0,846.0,905.0,967.0,1032.0,1101.0,1172.0,1248.0,1327.0,1410.0,1497.0,1588.0,1784.0,2116.0] grid=ptji_incl_y1.fast
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y2 [114.0,133.0,153.0,174.0,196.0,220.0,245.0,272.0,300.0,330.0,362.0,395.0,430.0,468.0,507.0,548.0,592.0,638.0,686.0,737.0,790.0,846.0,905.0,967.0,1032.0,1101.0,1172.0,1248.0,1327.0,1410.0,1784.0] grid=ptji_incl_y2.fast
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y3 [114.0,133.0,153.0,174.0,196.0,220.0,245.0,272.0,300.0,330.0,362.0,395.0,430.0,468.0,507.0,548.0,592.0,638.0,686.0,737.0,790.0,846.0,905.0,967.0,1032.0,1101.0,1172.0,1684.0] grid=ptji_incl_y3.fast
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y4 [114.0,133.0,153.0,174.0,196.0,220.0,245.0,272.0,300.0,330.0,362.0,395.0,430.0,468.0,507.0,548.0,592.0,638.0,686.0,737.0,790.0,846.0,905.0,967.0,1248.0] grid=ptji_incl_y4.fast
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y5 [114.0,133.0,153.0,174.0,196.0,220.0,245.0,272.0,300.0,330.0,362.0,395.0,430.0,468.0,507.0,548.0,592.0,638.0,686.0,905.0] grid=ptji_incl_y5.fast
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+END_HISTOGRAMS
+
+SCALES
+ muf = ptj1 mur = ptj1
+ muf = 2.718281828 mur = 2.718281828
+ muf = 4.48168907 mur = 4.48168907
+ muf = 4.48168907 mur = 2.718281828
+ muf = 2.718281828 mur = 4.48168907
+ muf = 12.18249396 mur = 2.718281828
+ muf = 2.718281828 mur = 12.18249396
+END_SCALES
+
+!####### SYNTAX ######################
+!##
+!## REWEIGHT {observable-name}**{val_power}
+!##
+!#####################################
+
+! REWEIGHT ht_part**4
+! REWEIGHT ht_part**1.4 !# DB
+REWEIGHT ht_part**6.5 !# KR
+
+CHANNELS
+ R
+END_CHANNELS
+
+SETUP
+END_SETUP
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2013_I1208923/fnl2332d.1jet.V-fastprod.run
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2013_I1208923/fnl2332d.1jet.V-fastprod.run (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2013_I1208923/fnl2332d.1jet.V-fastprod.run (revision 1772)
@@ -0,0 +1,174 @@
+NNLOJET_RUNCARD
+V-7TeV ! Job name id, must be less than 10 characters
+1jet ! Process name
+@EVENTS@ ! Number of events
+1 ! Number of iterations
+@SEED@ ! Seed number
+.false. ! Warmup
+.true. ! Production
+CT14nnlo ! PDF set
+0 ! PDF member
+antikt ! Jet algorithm, accepts 'kt', 'cam' or 'antikt'
+0.7d0 ! Rcut
+.false. ! exclusive
+0 ! Heavy particle decay type
+.1e-7 ! Technical cutoff y0
+.false. ! angular averaging of the phase space, default to true
+2 ! Virtual Integration method, use 2 if you're not sure
+all ! RR a/b region flag. Accepts 'a','b' or 'all'.
+0 ! set to zero for MC, 2 for point test
+.false. ! print max weight flag
+.true. ! momentum mapping and PDF storage flag
+.true. ! colour sampling flag
+.false. ! explicit pole check flag, stops integration when set to true
+
+PHYSICAL_PARAMETERS
+7000d0 ! roots
+125d0 ! Mass of the Higgs Boson
+0.004029643852d0 ! Width of the Higgs Boson
+91.1876d0 ! Mass of the Z Boson
+2.4952d0 ! Width of the Z Boson
+80.398d0 ! Mass of the W Boson
+2.1054d0 ! Width of the W Boson
+173.2d0 ! Mass of the Top Quark
+1.41d0 ! Width of the Top Quark
+4.18d0 ! Mass of the Bottom Quark
+0d0 ! Width of the Bottom Quark
+1.275d0 ! Mass of the Charm Quark
+0d0 ! Width of the Charm Quark
+
+! UNIT_PHASE
+
+SELECTORS
+ select jets_pt min = 114 max = 2116
+ select jets_abs_y max = 2.5
+ select njets min = 1
+END_SELECTORS
+
+
+
+HISTOGRAMS
+
+COMPOSITE > xptj0_y1 [114.0,133.0,153.0,174.0,196.0,220.0,245.0,272.0,300.0,330.0,362.0,395.0,430.0,468.0,507.0,548.0,592.0,638.0,686.0,737.0,790.0,846.0,905.0,967.0,1032.0,1101.0,1172.0,1248.0,1327.0,1410.0,1497.0,1588.0,1784.0,2116.0] grid=ptji_incl_y1.fast
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y2 [114.0,133.0,153.0,174.0,196.0,220.0,245.0,272.0,300.0,330.0,362.0,395.0,430.0,468.0,507.0,548.0,592.0,638.0,686.0,737.0,790.0,846.0,905.0,967.0,1032.0,1101.0,1172.0,1248.0,1327.0,1410.0,1784.0] grid=ptji_incl_y2.fast
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y3 [114.0,133.0,153.0,174.0,196.0,220.0,245.0,272.0,300.0,330.0,362.0,395.0,430.0,468.0,507.0,548.0,592.0,638.0,686.0,737.0,790.0,846.0,905.0,967.0,1032.0,1101.0,1172.0,1684.0] grid=ptji_incl_y3.fast
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y4 [114.0,133.0,153.0,174.0,196.0,220.0,245.0,272.0,300.0,330.0,362.0,395.0,430.0,468.0,507.0,548.0,592.0,638.0,686.0,737.0,790.0,846.0,905.0,967.0,1248.0] grid=ptji_incl_y4.fast
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y5 [114.0,133.0,153.0,174.0,196.0,220.0,245.0,272.0,300.0,330.0,362.0,395.0,430.0,468.0,507.0,548.0,592.0,638.0,686.0,905.0] grid=ptji_incl_y5.fast
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+END_HISTOGRAMS
+
+SCALES
+ muf = ptj1 mur = ptj1
+ muf = 2.718281828 mur = 2.718281828
+ muf = 4.48168907 mur = 4.48168907
+ muf = 4.48168907 mur = 2.718281828
+ muf = 2.718281828 mur = 4.48168907
+ muf = 12.18249396 mur = 2.718281828
+ muf = 2.718281828 mur = 12.18249396
+END_SCALES
+
+!####### SYNTAX ######################
+!##
+!## REWEIGHT {observable-name}**{val_power}
+!##
+!#####################################
+
+! REWEIGHT ht_part**4
+! REWEIGHT ht_part**1.4 !# DB
+REWEIGHT ht_part**6.5 !# KR
+
+CHANNELS
+ V
+END_CHANNELS
+
+SETUP
+END_SETUP
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2013_I1208923/fnl2332d.1jet.RRa-fastprod.conf
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2013_I1208923/fnl2332d.1jet.RRa-fastprod.conf (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2013_I1208923/fnl2332d.1jet.RRa-fastprod.conf (revision 1772)
@@ -0,0 +1,23 @@
+[global]
+include = nnlojet-gc.conf
+
+[jobs]
+;jobs = 10 ; Max. # of jobs (truncated to module maximum), D=mod
+;wall time = 3:00 ; Requested wall time in hh[:mm[:ss]] (also used for proxy lifetime)
+
+[parameters] ; This section defines the parameter space
+repeat = 1 ; How many times each parameter space point should be sampled
+parameters = ( SEED , EVENTS )
+SEED = range( 40000, 45000 )
+SEED type = expr
+;EVENTS = 13000
+;EVENTS = 150000
+EVENTS = 180000
+
+[UserTask]
+executable = fnlo-run-nnlojet.csh
+arguments = fnl2332d 1jet RRa fastprod
+subst files = fnl2332d.1jet.RRa-fastprod.run
+; NNLOJET production run
+input files = fnlo-run-nnlojet.pl fastNLO_v23_source_nnlojet_cvmfs.csh fnl2332d.1jet.RRa-fastprod.run 1jet.RRa-7TeV.y.1e-7.RRa jet.RRa-7TeV.ptji_incl_y1.wrm jet.RRa-7TeV.ptji_incl_y2.wrm jet.RRa-7TeV.ptji_incl_y3.wrm jet.RRa-7TeV.ptji_incl_y4.wrm jet.RRa-7TeV.ptji_incl_y5.wrm jet.7TeV.ptji_incl_y1.wrm jet.7TeV.ptji_incl_y2.wrm jet.7TeV.ptji_incl_y3.wrm jet.7TeV.ptji_incl_y4.wrm jet.7TeV.ptji_incl_y5.wrm
+output files = fnl2332d.1jet.RRa-fastprod.tar.gz
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2013_I1208923/fnl2332d.1jet.RRb-fastprod.conf
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2013_I1208923/fnl2332d.1jet.RRb-fastprod.conf (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2013_I1208923/fnl2332d.1jet.RRb-fastprod.conf (revision 1772)
@@ -0,0 +1,23 @@
+[global]
+include = nnlojet-gc.conf
+
+[jobs]
+;jobs = 10 ; Max. # of jobs (truncated to module maximum), D=mod
+;wall time = 3:00 ; Requested wall time in hh[:mm[:ss]] (also used for proxy lifetime)
+
+[parameters] ; This section defines the parameter space
+repeat = 1 ; How many times each parameter space point should be sampled
+parameters = ( SEED , EVENTS )
+SEED = range( 50000, 50400 )
+SEED type = expr
+;EVENTS = 200000
+;EVENTS = 2500000
+EVENTS = 2800000
+
+[UserTask]
+executable = fnlo-run-nnlojet.csh
+arguments = fnl2332d 1jet RRb fastprod
+subst files = fnl2332d.1jet.RRb-fastprod.run
+; NNLOJET production run
+input files = fnlo-run-nnlojet.pl fastNLO_v23_source_nnlojet_cvmfs.csh fnl2332d.1jet.RRb-fastprod.run 1jet.RRb-7TeV.y.1e-7.RRb jet.RRb-7TeV.ptji_incl_y1.wrm jet.RRb-7TeV.ptji_incl_y2.wrm jet.RRb-7TeV.ptji_incl_y3.wrm jet.RRb-7TeV.ptji_incl_y4.wrm jet.RRb-7TeV.ptji_incl_y5.wrm jet.7TeV.ptji_incl_y1.wrm jet.7TeV.ptji_incl_y2.wrm jet.7TeV.ptji_incl_y3.wrm jet.7TeV.ptji_incl_y4.wrm jet.7TeV.ptji_incl_y5.wrm
+output files = fnl2332d.1jet.RRb-fastprod.tar.gz
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2013_I1208923/fnl2332d.1jet.V-fastwarm.run
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2013_I1208923/fnl2332d.1jet.V-fastwarm.run (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2013_I1208923/fnl2332d.1jet.V-fastwarm.run (revision 1772)
@@ -0,0 +1,174 @@
+NNLOJET_RUNCARD
+V-7TeV ! Job name id, must be less than 10 characters
+1jet ! Process name
+@EVENTS@ ! Number of events
+1 ! Number of iterations
+@SEED@ ! Seed number
+.false. ! Warmup
+.true. ! Production
+CT14nnlo ! PDF set
+0 ! PDF member
+antikt ! Jet algorithm, accepts 'kt', 'cam' or 'antikt'
+0.7d0 ! Rcut
+.false. ! exclusive
+0 ! Heavy particle decay type
+.1e-7 ! Technical cutoff y0
+.false. ! angular averaging of the phase space, default to true
+2 ! Virtual Integration method, use 2 if you're not sure
+all ! RR a/b region flag. Accepts 'a','b' or 'all'.
+0 ! set to zero for MC, 2 for point test
+.false. ! print max weight flag
+.true. ! momentum mapping and PDF storage flag
+.true. ! colour sampling flag
+.false. ! explicit pole check flag, stops integration when set to true
+
+PHYSICAL_PARAMETERS
+7000d0 ! roots
+125d0 ! Mass of the Higgs Boson
+0.004029643852d0 ! Width of the Higgs Boson
+91.1876d0 ! Mass of the Z Boson
+2.4952d0 ! Width of the Z Boson
+80.398d0 ! Mass of the W Boson
+2.1054d0 ! Width of the W Boson
+173.2d0 ! Mass of the Top Quark
+1.41d0 ! Width of the Top Quark
+4.18d0 ! Mass of the Bottom Quark
+0d0 ! Width of the Bottom Quark
+1.275d0 ! Mass of the Charm Quark
+0d0 ! Width of the Charm Quark
+
+UNIT_PHASE
+
+SELECTORS
+ select jets_pt min = 114 max = 2116
+ select jets_abs_y max = 2.5
+ select njets min = 1
+END_SELECTORS
+
+
+
+HISTOGRAMS
+
+COMPOSITE > xptj0_y1 [114.0,133.0,153.0,174.0,196.0,220.0,245.0,272.0,300.0,330.0,362.0,395.0,430.0,468.0,507.0,548.0,592.0,638.0,686.0,737.0,790.0,846.0,905.0,967.0,1032.0,1101.0,1172.0,1248.0,1327.0,1410.0,1497.0,1588.0,1784.0,2116.0] grid=ptji_incl_y1.fast
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y2 [114.0,133.0,153.0,174.0,196.0,220.0,245.0,272.0,300.0,330.0,362.0,395.0,430.0,468.0,507.0,548.0,592.0,638.0,686.0,737.0,790.0,846.0,905.0,967.0,1032.0,1101.0,1172.0,1248.0,1327.0,1410.0,1784.0] grid=ptji_incl_y2.fast
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y3 [114.0,133.0,153.0,174.0,196.0,220.0,245.0,272.0,300.0,330.0,362.0,395.0,430.0,468.0,507.0,548.0,592.0,638.0,686.0,737.0,790.0,846.0,905.0,967.0,1032.0,1101.0,1172.0,1684.0] grid=ptji_incl_y3.fast
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y4 [114.0,133.0,153.0,174.0,196.0,220.0,245.0,272.0,300.0,330.0,362.0,395.0,430.0,468.0,507.0,548.0,592.0,638.0,686.0,737.0,790.0,846.0,905.0,967.0,1248.0] grid=ptji_incl_y4.fast
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y5 [114.0,133.0,153.0,174.0,196.0,220.0,245.0,272.0,300.0,330.0,362.0,395.0,430.0,468.0,507.0,548.0,592.0,638.0,686.0,905.0] grid=ptji_incl_y5.fast
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+END_HISTOGRAMS
+
+SCALES
+ muf = ptj1 mur = ptj1
+ muf = 2.718281828 mur = 2.718281828
+ muf = 4.48168907 mur = 4.48168907
+ muf = 4.48168907 mur = 2.718281828
+ muf = 2.718281828 mur = 4.48168907
+ muf = 12.18249396 mur = 2.718281828
+ muf = 2.718281828 mur = 12.18249396
+END_SCALES
+
+!####### SYNTAX ######################
+!##
+!## REWEIGHT {observable-name}**{val_power}
+!##
+!#####################################
+
+! REWEIGHT ht_part**4
+! REWEIGHT ht_part**1.4 !# DB
+REWEIGHT ht_part**6.5 !# KR
+
+CHANNELS
+ V
+END_CHANNELS
+
+SETUP
+END_SETUP
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2013_I1208923/fnl2332d.1jet.RRa-warm.run
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2013_I1208923/fnl2332d.1jet.RRa-warm.run (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2013_I1208923/fnl2332d.1jet.RRa-warm.run (revision 1772)
@@ -0,0 +1,168 @@
+NNLOJET_RUNCARD
+RRa-7TeV ! Job name id, must be less than 10 characters
+1jet ! Process name
+500000 ! Number of events
+10 ! Number of iterations
+4 ! Seed number
+.true. ! Warmup; new setting 2: continue warmup
+.false. ! Production
+CT14nnlo ! PDF set
+0 ! PDF member
+antikt ! Jet algorithm, accepts 'kt', 'cam' or 'antikt'
+0.7d0 ! Rcut
+.false. ! exclusive
+0 ! Heavy particle decay type
+.1e-7 ! Technical cutoff y0
+.false. ! angular averaging of the phase space, default to true
+2 ! Virtual Integration method, use 2 if you're not sure
+a ! RR a/b region flag. Accepts 'a','b' or 'all'.
+0 ! set to zero for MC, 2 for point test
+.false. ! print max weight flag
+.true. ! momentum mapping and PDF storage flag
+.true. ! colour sampling flag
+.false. ! explicit pole check flag, stops integration when set to true
+
+PHYSICAL_PARAMETERS
+7000d0 ! roots
+125d0 ! Mass of the Higgs Boson
+0.004029643852d0 ! Width of the Higgs Boson
+91.1876d0 ! Mass of the Z Boson
+2.4952d0 ! Width of the Z Boson
+80.398d0 ! Mass of the W Boson
+2.1054d0 ! Width of the W Boson
+173.2d0 ! Mass of the Top Quark
+1.41d0 ! Width of the Top Quark
+4.18d0 ! Mass of the Bottom Quark
+0d0 ! Width of the Bottom Quark
+1.275d0 ! Mass of the Charm Quark
+0d0 ! Width of the Charm Quark
+
+! UNIT_PHASE
+
+SELECTORS
+ select jets_pt min = 114 max = 2116
+ select jets_abs_y max = 2.5
+ select njets min = 1
+END_SELECTORS
+
+
+
+HISTOGRAMS
+
+COMPOSITE > xptj0_y1 [114.0,133.0,153.0,174.0,196.0,220.0,245.0,272.0,300.0,330.0,362.0,395.0,430.0,468.0,507.0,548.0,592.0,638.0,686.0,737.0,790.0,846.0,905.0,967.0,1032.0,1101.0,1172.0,1248.0,1327.0,1410.0,1497.0,1588.0,1784.0,2116.0]
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y2 [114.0,133.0,153.0,174.0,196.0,220.0,245.0,272.0,300.0,330.0,362.0,395.0,430.0,468.0,507.0,548.0,592.0,638.0,686.0,737.0,790.0,846.0,905.0,967.0,1032.0,1101.0,1172.0,1248.0,1327.0,1410.0,1784.0]
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y3 [114.0,133.0,153.0,174.0,196.0,220.0,245.0,272.0,300.0,330.0,362.0,395.0,430.0,468.0,507.0,548.0,592.0,638.0,686.0,737.0,790.0,846.0,905.0,967.0,1032.0,1101.0,1172.0,1684.0]
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y4 [114.0,133.0,153.0,174.0,196.0,220.0,245.0,272.0,300.0,330.0,362.0,395.0,430.0,468.0,507.0,548.0,592.0,638.0,686.0,737.0,790.0,846.0,905.0,967.0,1248.0]
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y5 [114.0,133.0,153.0,174.0,196.0,220.0,245.0,272.0,300.0,330.0,362.0,395.0,430.0,468.0,507.0,548.0,592.0,638.0,686.0,905.0]
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+END_HISTOGRAMS
+
+SCALES
+ muf = ptj1 mur = ptj1
+END_SCALES
+
+!####### SYNTAX ######################
+!##
+!## REWEIGHT {observable-name}**{val_power}
+!##
+!#####################################
+
+! REWEIGHT ht_part**4
+! REWEIGHT ht_part**1.4 !# DB
+REWEIGHT ht_part**6.5 !# KR
+
+CHANNELS
+ RR
+END_CHANNELS
+
+SETUP
+END_SETUP
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2013_I1208923/fnl2332d.1jet.RV-warm.run
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2013_I1208923/fnl2332d.1jet.RV-warm.run (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2013_I1208923/fnl2332d.1jet.RV-warm.run (revision 1772)
@@ -0,0 +1,168 @@
+NNLOJET_RUNCARD
+RV-7TeV ! Job name id, must be less than 10 characters
+1jet ! Process name
+1000000 ! Number of events
+10 ! Number of iterations
+6 ! Seed number
+.true. ! Warmup
+.false. ! Production
+CT14nnlo ! PDF set
+0 ! PDF member
+antikt ! Jet algorithm, accepts 'kt', 'cam' or 'antikt'
+0.7d0 ! Rcut
+.false. ! exclusive
+0 ! Heavy particle decay type
+.1e-7 ! Technical cutoff y0
+.false. ! angular averaging of the phase space, default to true
+2 ! Virtual Integration method, use 2 if you're not sure
+all ! RR a/b region flag. Accepts 'a','b' or 'all'.
+0 ! set to zero for MC, 2 for point test
+.false. ! print max weight flag
+.true. ! momentum mapping and PDF storage flag
+.true. ! colour sampling flag
+.false. ! explicit pole check flag, stops integration when set to true
+
+PHYSICAL_PARAMETERS
+7000d0 ! roots
+125d0 ! Mass of the Higgs Boson
+0.004029643852d0 ! Width of the Higgs Boson
+91.1876d0 ! Mass of the Z Boson
+2.4952d0 ! Width of the Z Boson
+80.398d0 ! Mass of the W Boson
+2.1054d0 ! Width of the W Boson
+173.2d0 ! Mass of the Top Quark
+1.41d0 ! Width of the Top Quark
+4.18d0 ! Mass of the Bottom Quark
+0d0 ! Width of the Bottom Quark
+1.275d0 ! Mass of the Charm Quark
+0d0 ! Width of the Charm Quark
+
+! UNIT_PHASE
+
+SELECTORS
+ select jets_pt min = 114 max = 2116
+ select jets_abs_y max = 2.5
+ select njets min = 1
+END_SELECTORS
+
+
+
+HISTOGRAMS
+
+COMPOSITE > xptj0_y1 [114.0,133.0,153.0,174.0,196.0,220.0,245.0,272.0,300.0,330.0,362.0,395.0,430.0,468.0,507.0,548.0,592.0,638.0,686.0,737.0,790.0,846.0,905.0,967.0,1032.0,1101.0,1172.0,1248.0,1327.0,1410.0,1497.0,1588.0,1784.0,2116.0]
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y2 [114.0,133.0,153.0,174.0,196.0,220.0,245.0,272.0,300.0,330.0,362.0,395.0,430.0,468.0,507.0,548.0,592.0,638.0,686.0,737.0,790.0,846.0,905.0,967.0,1032.0,1101.0,1172.0,1248.0,1327.0,1410.0,1784.0]
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y3 [114.0,133.0,153.0,174.0,196.0,220.0,245.0,272.0,300.0,330.0,362.0,395.0,430.0,468.0,507.0,548.0,592.0,638.0,686.0,737.0,790.0,846.0,905.0,967.0,1032.0,1101.0,1172.0,1684.0]
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y4 [114.0,133.0,153.0,174.0,196.0,220.0,245.0,272.0,300.0,330.0,362.0,395.0,430.0,468.0,507.0,548.0,592.0,638.0,686.0,737.0,790.0,846.0,905.0,967.0,1248.0]
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y5 [114.0,133.0,153.0,174.0,196.0,220.0,245.0,272.0,300.0,330.0,362.0,395.0,430.0,468.0,507.0,548.0,592.0,638.0,686.0,905.0]
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+END_HISTOGRAMS
+
+SCALES
+ muf = ptj1 mur = ptj1
+END_SCALES
+
+!####### SYNTAX ######################
+!##
+!## REWEIGHT {observable-name}**{val_power}
+!##
+!#####################################
+
+! REWEIGHT ht_part**4
+! REWEIGHT ht_part**1.4 !# DB
+REWEIGHT ht_part**6.5 !# KR
+
+CHANNELS
+ RV
+END_CHANNELS
+
+SETUP
+END_SETUP
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2013_I1208923/fnl2332d.1jet.VV-warm.run
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2013_I1208923/fnl2332d.1jet.VV-warm.run (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ppjets/CMS_2013_I1208923/fnl2332d.1jet.VV-warm.run (revision 1772)
@@ -0,0 +1,168 @@
+NNLOJET_RUNCARD
+VV-7TeV ! Job name id, must be less than 10 characters
+1jet ! Process name
+7000000 ! Number of events
+10 ! Number of iterations
+7 ! Seed number
+.true. ! Warmup
+.false. ! Production
+CT14nnlo ! PDF set
+0 ! PDF member
+antikt ! Jet algorithm, accepts 'kt', 'cam' or 'antikt'
+0.7d0 ! Rcut
+.false. ! exclusive
+0 ! Heavy particle decay type
+.1e-7 ! Technical cutoff y0
+.false. ! angular averaging of the phase space, default to true
+2 ! Virtual Integration method, use 2 if you're not sure
+all ! RR a/b region flag. Accepts 'a','b' or 'all'.
+0 ! set to zero for MC, 2 for point test
+.false. ! print max weight flag
+.true. ! momentum mapping and PDF storage flag
+.true. ! colour sampling flag
+.false. ! explicit pole check flag, stops integration when set to true
+
+PHYSICAL_PARAMETERS
+7000d0 ! roots
+125d0 ! Mass of the Higgs Boson
+0.004029643852d0 ! Width of the Higgs Boson
+91.1876d0 ! Mass of the Z Boson
+2.4952d0 ! Width of the Z Boson
+80.398d0 ! Mass of the W Boson
+2.1054d0 ! Width of the W Boson
+173.2d0 ! Mass of the Top Quark
+1.41d0 ! Width of the Top Quark
+4.18d0 ! Mass of the Bottom Quark
+0d0 ! Width of the Bottom Quark
+1.275d0 ! Mass of the Charm Quark
+0d0 ! Width of the Charm Quark
+
+! UNIT_PHASE
+
+SELECTORS
+ select jets_pt min = 114 max = 2116
+ select jets_abs_y max = 2.5
+ select njets min = 1
+END_SELECTORS
+
+
+
+HISTOGRAMS
+
+COMPOSITE > xptj0_y1 [114.0,133.0,153.0,174.0,196.0,220.0,245.0,272.0,300.0,330.0,362.0,395.0,430.0,468.0,507.0,548.0,592.0,638.0,686.0,737.0,790.0,846.0,905.0,967.0,1032.0,1101.0,1172.0,1248.0,1327.0,1410.0,1497.0,1588.0,1784.0,2116.0]
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=0.0 max=0.5
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y2 [114.0,133.0,153.0,174.0,196.0,220.0,245.0,272.0,300.0,330.0,362.0,395.0,430.0,468.0,507.0,548.0,592.0,638.0,686.0,737.0,790.0,846.0,905.0,967.0,1032.0,1101.0,1172.0,1248.0,1327.0,1410.0,1784.0]
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=0.5 max=1.0
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y3 [114.0,133.0,153.0,174.0,196.0,220.0,245.0,272.0,300.0,330.0,362.0,395.0,430.0,468.0,507.0,548.0,592.0,638.0,686.0,737.0,790.0,846.0,905.0,967.0,1032.0,1101.0,1172.0,1684.0]
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=1.0 max=1.5
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y4 [114.0,133.0,153.0,174.0,196.0,220.0,245.0,272.0,300.0,330.0,362.0,395.0,430.0,468.0,507.0,548.0,592.0,638.0,686.0,737.0,790.0,846.0,905.0,967.0,1248.0]
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=1.5 max=2.0
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+COMPOSITE > xptj0_y5 [114.0,133.0,153.0,174.0,196.0,220.0,245.0,272.0,300.0,330.0,362.0,395.0,430.0,468.0,507.0,548.0,592.0,638.0,686.0,905.0]
+ ptj1
+ HISTOGRAM_SELECTORS
+ select abs_yj1 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+ ptj2
+ HISTOGRAM_SELECTORS
+ select abs_yj2 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+ ptj3
+ HISTOGRAM_SELECTORS
+ select abs_yj3 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+ ptj4
+ HISTOGRAM_SELECTORS
+ select abs_yj4 min=2.0 max=2.5
+ END_HISTOGRAM_SELECTORS
+END_COMPOSITE
+
+END_HISTOGRAMS
+
+SCALES
+ muf = ptj1 mur = ptj1
+END_SCALES
+
+!####### SYNTAX ######################
+!##
+!## REWEIGHT {observable-name}**{val_power}
+!##
+!#####################################
+
+! REWEIGHT ht_part**4
+! REWEIGHT ht_part**1.4 !# DB
+REWEIGHT ht_part**6.5 !# KR
+
+CHANNELS
+ VV
+END_CHANNELS
+
+SETUP
+END_SETUP
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/data/DIS/DIS-H1-HQ-2J.run
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/data/DIS/DIS-H1-HQ-2J.run (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/data/DIS/DIS-H1-HQ-2J.run (revision 1772)
@@ -0,0 +1,247 @@
+NNLOJET_RUNCARD
+H1-HQ-8 ! Job name id, must be less than 10 characters
+DIS ! Process name
+1000 ! Number of events
+12 ! Number of iterations
+1 ! Seed number
+.true. ! Warmup
+.true. ! Production
+NNPDF30_nnlo_as_0118 ! PDF set
+0 ! PDF member
+kt ! Jet algorithm, accepts 'kt', 'cam' or 'antikt'
+1 ! Rcut
+.false. ! exclusive
+1 ! Heavy particle decay type
+3d-7 ! Technical cutoff y0
+.true. ! angular averaging of the phase space, default to true
+2 ! Virtual Integration method, use 2 if you're not sure
+all ! RR a/b region flag. Accepts 'a','b' or 'all'.
+0 ! set to zero for MC, 2 for point test
+.false. ! print max weight flag
+.true. ! momentum mapping and PDF storage flag
+.true. ! colour sampling flag
+.false. ! explicit pole check flag, stops integration when set to true
+
+PHYSICAL_PARAMETERS
+319d0 ! roots
+125d0 ! Mass of the Higgs Boson
+0.004029643852d0 ! Width of the Higgs Boson
+91.1876d0 ! Mass of the Z Boson
+2.4952d0 ! Width of the Z Boson
+80.398d0 ! Mass of the W Boson
+2.1054d0 ! Width of the W Boson
+173.2d0 ! Mass of the Top Quark
+1.41d0 ! Width of the Top Quark
+4.18d0 ! Mass of the Bottom Quark
+0d0 ! Width of the Bottom Quark
+1.275d0 ! Mass of the Charm Quark
+0d0 ! Width of the Charm Quark
+
+
+COLLIDER ep Ee=27.6 Ep=920
+
+CHANNELS
+ LO
+END_CHANNELS
+
+
+SETUP
+ Recom_Scheme Et
+ EPRC ON
+END_SETUP
+
+
+
+REWEIGHT ht_part**1.6
+
+
+SELECTORS
+
+ !####### SYNTAX ######################
+ !##
+ !## [select|accept|reject] {observable-name} [min={val_min}] [max={val_max}]
+ !##
+ !#####################################
+ !#
+ !# * comments begin with the character `!` and will be excluded from the parser
+ !# just like this documentation block. This way, one can maintain various setups
+ !# in one runcard and comment in/out parts as needed.
+ !#
+ !# * multiple selectors are combined with a logical "and"
+ !#
+ !# * only necessary to specify at least one of the two: min, max
+ !#
+ !# * if both are set, the order of the min/max specification is irrelevant
+ !#
+ !# * each line here generates a new Selector and it is therefore better to reduce
+ !# the number of lines if possible. For instance the following cases are
+ !# all equivalent and the one-liners should be preferred:
+ !#
+ !# a) select ylp min = -5 ! --> accept [-5, +infty]
+ !# select ylp max = +5 ! --> accept [-infty, +5]
+ !# ! combined: [-5, +5]
+ !#
+ !# b) reject ylp max = -5 ! --> reject [+5, +infty]
+ !# reject ylp min = +5 ! --> reject [-infty, -5]
+ !# ! combined: [-5, +5]
+ !#
+ !# c) select ylp min = -5 max = +5 ! --> accept [-5, +5]
+ !#
+ !# d) select abs_ylp max = +5 ! --> accept |y| < 5 => [-5, +5]
+ !#
+ !# e) reject abs_ylp min = +5 ! --> reject |y| > 5 => [-5, +5]
+ !#
+ !# * the `reject` option actually has a very nice use-case in the exclusion
+ !# of the barrel--endcap region like this
+ !#
+ !# a) select abs_ylp max = +5 ! global selector
+ !# reject abs_ylp min = +1.4442 max = +1.560 ! CMS barrel-endcap region
+ !#
+ !# b) select ylp min = -5 max = -1.560
+ !# select ylp min = -1.4442 max = +1.4442
+ !# select ylp min = +1.560 max = +5
+ !#
+ !# where the second one is clearly more tedious to specify
+ !#
+ !#####################################
+
+
+ !----- jet veto
+ select y min = 0.2 max=0.7
+ select q2 min = 150 max = 15000
+ select hera_jets_eta min = -1 max = 2.5
+ select jets_pt min = 5 max = 50
+ select njets min = 2
+
+
+END_SELECTORS
+
+
+
+HISTOGRAMS
+
+ !####### SYNTAX ######################
+ !##
+ !## a) equal-sized bins:
+ !## {observable-name}[>{file-name}] nbins={val_nbins} min={val_min} max={val_max}
+ !##
+ !## b) non-uniform bins:
+ !## {observable-name}[>{file-name}] [bound0,bound1,bound2,...,boundN]
+ !##
+ !## *) conditional binning:
+ !## dress a histogram with additional selectors by specifying them inside a block:
+ !##
+ !## HISTOGRAM_SELECTORS
+ !## {SELECTOR}
+ !## .
+ !## .
+ !## .
+ !## END_HISTOGRAM_SELECTORS
+ !##
+ !## where {SELECTOR} follows the same syntax described above. A binning into
+ !## this histogram is then only performed when the event passes all selectors
+ !## specified in this block.
+ !##
+ !#####################################
+ !#
+ !# * comments begin with the character `!` and will be excluded from the parser
+ !#
+ !#####################################
+
+
+ ! ------------------------------------------------------------------------------- !
+ ! H1 HERA-II High-Q2 Dijets
+ ! 150 < Q2 < 15000
+ ! 0.2 < y <0.7
+ ! -1. < eta_hera < -2.5
+ ! 5. < ptj < 50 !maximum pt cut!
+ ! m12 > 16
+ ! ------------------------------------------------------------------------------- !
+ !> ./NNLOJET -listobs DIS
+ ptavg_12 > ptavg_12_q2_150_200 [7,11,18,30,50] grid=ptavg_12_q2_150_200.fast
+ HISTOGRAM_SELECTORS
+ select q2 min = 150 max = 200
+ select m12 min = 16
+ END_HISTOGRAM_SELECTORS
+
+ ptavg_12 > ptavg_12_q2_200_270 [7,11,18,30,50] grid=ptavg_12_q2_200_270.fast
+ HISTOGRAM_SELECTORS
+ select q2 min = 200 max = 270
+ select m12 min = 16
+ END_HISTOGRAM_SELECTORS
+
+ ptavg_12 > ptavg_12_q2_270_400 [7,11,18,30,50] grid=ptavg_12_q2_270_400.fast
+ HISTOGRAM_SELECTORS
+ select q2 min = 270 max = 400
+ select m12 min = 16
+ END_HISTOGRAM_SELECTORS
+
+ ptavg_12 > ptavg_12_q2_400_700 [7,11,18,30,50] grid=ptavg_12_q2_400_700.fast
+ HISTOGRAM_SELECTORS
+ select q2 min = 400 max = 700
+ select m12 min = 16
+ END_HISTOGRAM_SELECTORS
+
+ ptavg_12 > ptavg_12_q2_700_5000 [7,11,18,30,50] grid=ptavg_12_q2_700_5000.fast
+ HISTOGRAM_SELECTORS
+ select q2 min = 700 max = 5000
+ select m12 min = 16
+ END_HISTOGRAM_SELECTORS
+
+ ptavg_12 > ptavg_12_q2_5000_15000 [7,11,18,30,50] grid=ptavg_12_q2_5000_15000.fast
+ HISTOGRAM_SELECTORS
+ select q2 min = 5000 max = 15000
+ select m12 min = 16
+ END_HISTOGRAM_SELECTORS
+
+
+END_HISTOGRAMS
+
+
+
+SCALES
+
+ !####### SYNTAX ######################
+ !##
+ !## a) fixed scale:
+ !## fixed muF={val_muf} muR={val_mur}
+ !##
+ !## b) dynamic scale:
+ !## {observable-name} facF={val_facf} facR={val_facr}
+ !##
+ !#####################################
+ !#
+ !# * for fixed scales: facscale = {val_muf}, renscale = {val_mur}
+ !#
+ !# * for dynamic scales: facscale = {val_facf}*{obs}, renscale = {val_facr}*{obs}
+ !#
+ !# * the observable for dynamic scales must be [GeV] (this is not checked)
+ !#
+ !#####################################
+
+ muf = dscl mur = dscl
+
+END_SCALES
+
+
+
+!####### SYNTAX ######################
+!##
+!## PHOTON_ISOLATION {algorithm} {algorithm-options}
+!##
+!#####################################
+!#
+!# * Frixione:
+!#
+!# PHOTON_ISOLATION frix delta={var} epsilon={var} n={var}
+!#
+!# * cut on sum(ET) inside a cone around the photon:
+!#
+!# PHOTON_ISOLATION etsum delta={var} etmax={var}
+!#
+!#####################################
+
+!PHOTON_ISOLATION frix delta = 0.5 epsilon = 0.1 n = 1
+!PHOTON_ISOLATION etsum delta = 0.5 etmax = 10
+
+
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ZJ/Testrun/ZJ.NNLO-RRa-fastwarmup.run
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ZJ/Testrun/ZJ.NNLO-RRa-fastwarmup.run (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ZJ/Testrun/ZJ.NNLO-RRa-fastwarmup.run (revision 1772)
@@ -0,0 +1,251 @@
+NNLOJET_RUNCARD
+NNLO-RRa ! Job name id, must be less than 10 characters
+ZJ ! Process name
+@EVENTS@ ! Number of events
+1 ! Number of iterations
+@SEED@ ! Seed number
+.false. ! Warmup
+.true. ! Production
+NNPDF30_nnlo_as_0118 ! PDF set
+antikt ! Jet algorithm, accepts 'kt', 'cam' or 'antikt'
+0.5d0 ! Rcut
+.false. ! exclusive
+1 ! Heavy particle decay type
+1d-7 ! Technical cutoff y0
+.true. ! angular averaging of the phase space, default to true
+2 ! Virtual Integration method, use 2 if you're not sure
+a ! RR a/b region flag. Accepts 'a','b' or 'all'.
+0 ! set to zero for MC, 2 for point test
+.false. ! print max weight flag
+.true. ! momentum mapping and PDF storage flag
+.true. ! colour sampling flag
+.false. ! explicit pole check flag, stops integration when set to true
+
+PHYSICAL_PARAMETERS
+8000d0 ! roots
+125d0 ! Mass of the Higgs Boson
+0.004029643852d0 ! Width of the Higgs Boson
+91.1876d0 ! Mass of the Z Boson
+2.4952d0 ! Width of the Z Boson
+80.398d0 ! Mass of the W Boson
+2.1054d0 ! Width of the W Boson
+173.2d0 ! Mass of the Top Quark
+1.41d0 ! Width of the Top Quark
+4.18d0 ! Mass of the Bottom Quark
+0d0 ! Width of the Bottom Quark
+1.275d0 ! Mass of the Charm Quark
+0d0 ! Width of the Charm Quark
+1000d0 ! Mass of the KK graviton
+0d0 ! Width of the KK graviton
+
+UNIT_PHASE
+
+SELECTORS
+
+ !####### SYNTAX ######################
+ !##
+ !## [select|accept|reject] {observable-name} [min={val_min}] [max={val_max}]
+ !##
+ !#####################################
+ !#
+ !# * comments begin with the character `!` and will be excluded from the parser
+ !# just like this documentation block. This way, one can maintain various setups
+ !# in one runcard and comment in/out parts as needed.
+ !#
+ !# * multiple selectors are combined with a logical "and"
+ !#
+ !# * only necessary to specify at least one of the two: min, max
+ !#
+ !# * if both are set, the order of the min/max specification is irrelevant
+ !#
+ !# * each line here generates a new Selector and it is therefore better to reduce
+ !# the number of lines if possible. For instance the following cases are
+ !# all equivalent and the one-liners should be preferred:
+ !#
+ !# a) select ylp min = -5 ! --> accept [-5, +infty]
+ !# select ylp max = +5 ! --> accept [-infty, +5]
+ !# ! combined: [-5, +5]
+ !#
+ !# b) reject ylp max = -5 ! --> reject [+5, +infty]
+ !# reject ylp min = +5 ! --> reject [-infty, -5]
+ !# ! combined: [-5, +5]
+ !#
+ !# c) select ylp min = -5 max = +5 ! --> accept [-5, +5]
+ !#
+ !# d) select abs_ylp max = +5 ! --> accept |y| < 5 => [-5, +5]
+ !#
+ !# e) reject abs_ylp min = +5 ! --> reject |y| > 5 => [-5, +5]
+ !#
+ !# * the `reject` option actually has a very nice use-case in the exclusion
+ !# of the barrel--endcap region like this
+ !#
+ !# a) select abs_ylp max = +5 ! global selector
+ !# reject abs_ylp min = +1.4442 max = +1.560 ! CMS barrel-endcap region
+ !#
+ !# b) select ylp min = -5 max = -1.560
+ !# select ylp min = -1.4442 max = +1.4442
+ !# select ylp min = +1.560 max = +5
+ !#
+ !# where the second one is clearly more tedious to specify
+ !#
+ !#####################################
+
+
+ !----- jet veto
+ select jets_pt min = 30
+ select jets_abs_y max = 3
+ select jets_abs_eta max = 10
+
+ !----- for Z production we have two leptons (l^[+-] = l[pm])
+ select abs_ylp max=5
+ select abs_ylm max=5
+
+ !----- V = {lp, lm}
+ select mll min = 80 max = 100
+
+ !----- for inclusive ptz
+ !select njets min = 0
+ !select ptz min = 20
+
+END_SELECTORS
+
+
+
+HISTOGRAMS
+
+ !####### SYNTAX ######################
+ !##
+ !## a) equal-sized bins:
+ !## {observable-name}[>{file-name}] nbins={val_nbins} min={val_min} max={val_max}
+ !##
+ !## b) non-uniform bins:
+ !## {observable-name}[>{file-name}] [bound0,bound1,bound2,...,boundN]
+ !##
+ !## *) conditional binning:
+ !## dress a histogram with additional selectors by specifying them inside a block:
+ !##
+ !## HISTOGRAM_SELECTORS
+ !## {SELECTOR}
+ !## .
+ !## .
+ !## .
+ !## END_HISTOGRAM_SELECTORS
+ !##
+ !## where {SELECTOR} follows the same syntax described above. A binning into
+ !## this histogram is then only performed when the event passes all selectors
+ !## specified in this block.
+ !##
+ !#####################################
+ !#
+ !# * comments begin with the character `!` and will be excluded from the parser
+ !#
+ !#####################################
+
+ !----- these are mostly the histograms produced also in the `default` branch
+ !----- parsing works in any order of the assignments `x = val`
+
+ ptj1 nbins = 19 min = 30d0 max = 600d0 grid=ZJ-ptj1.fast
+ etaj1 nbins = 20 min =-3d0 max = 3d0 grid=ZJ-etaj1.fast
+ yz nbins = 20 min =-3d0 max = 3d0 grid=ZJ-yz.fast
+
+END_HISTOGRAMS
+
+
+
+SCALES
+
+ !####### SYNTAX ######################
+ !##
+ !## muf={scale-specifier} mur={scale-specifier}
+ !##
+ !#####################################
+ !#
+ !# * {scale-specifier}
+ !#
+ !# a) fixed scale: [{fac}*] {value}
+ !#
+ !# b) dynamic scale: [{fac}*] {observable-name}
+ !#
+ !# * the observable for dynamic scales must be [GeV] (this is not checked)
+ !#
+ !#####################################
+
+ !----- ZJ paper setup
+ !> fixed scales
+ muf = 91.1876 mur = 91.1876
+ ! muf = 2.0 * 91.1876 mur = 2.0 * 91.1876
+ ! muf = 0.5 * 91.1876 mur = 0.5 * 91.1876
+
+ !> dynamical scales
+ ! muf = mll mur = 2.0 * mll
+ ! muf = 2.0 * mll mur = mll
+
+ !> mix it up?
+ ! muf = 0.5 * mll mur = 1.0 * 91.1876
+ ! muf = 5 mur = 2.0 * ptj1
+
+END_SCALES
+
+
+
+!####### SYNTAX ######################
+!##
+!## REWEIGHT {observable-name}**{val_power}
+!##
+!#####################################
+
+! REWEIGHT ht_part**4
+
+
+
+!####### SYNTAX ######################
+!##
+!## PHOTON_ISOLATION {algorithm} {algorithm-options}
+!##
+!#####################################
+!#
+!# * Frixione:
+!#
+!# PHOTON_ISOLATION frix delta={var} epsilon={var} n={var}
+!#
+!# * cut on sum(ET) inside a cone around the photon:
+!#
+!# PHOTON_ISOLATION etsum delta={var} etmax={var}
+!#
+!#####################################
+
+!PHOTON_ISOLATION frix delta = 0.5 epsilon = 0.1 n = 1
+!PHOTON_ISOLATION etsum delta = 0.5 etmax = 10
+
+
+
+CHANNELS
+
+ !####### SYNTAX ######################
+ !##
+ !## list of process id's (see selectchannelXYZ.f)
+ !##
+ !#####################################
+ !#
+ !# * any number of whitespace-separated process id's in one line allowed
+ !#
+ !# * self-explaning wild-cards:
+ !# - ALL
+ !# - LO, NLO, NNLO
+ !# - V, R
+ !# - VV, RV, RR
+ !#
+ !#####################################
+
+ RR ! process
+
+ ! 1 ! one B channel
+ ! 13 ! one R channel
+ ! 73 ! one V channel
+ ! 163 ! one RR channel
+ ! 317 ! one RV channel
+ ! 617 ! one VV channel
+
+ ! 17 18 31 32 ! qg-initiated R contributions
+
+END_CHANNELS
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ZJ/Testrun/ZJ.NNLO-VV-fastprod.run
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ZJ/Testrun/ZJ.NNLO-VV-fastprod.run (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ZJ/Testrun/ZJ.NNLO-VV-fastprod.run (revision 1772)
@@ -0,0 +1,251 @@
+NNLOJET_RUNCARD
+NNLO-VV ! Job name id, must be less than 10 characters
+ZJ ! Process name
+@EVENTS@ ! Number of events
+1 ! Number of iterations
+@SEED@ ! Seed number
+.false. ! Warmup
+.true. ! Production
+NNPDF30_nnlo_as_0118 ! PDF set
+antikt ! Jet algorithm, accepts 'kt', 'cam' or 'antikt'
+0.5d0 ! Rcut
+.false. ! exclusive
+1 ! Heavy particle decay type
+1d-7 ! Technical cutoff y0
+.true. ! angular averaging of the phase space, default to true
+2 ! Virtual Integration method, use 2 if you're not sure
+all ! RR a/b region flag. Accepts 'a','b' or 'all'.
+0 ! set to zero for MC, 2 for point test
+.false. ! print max weight flag
+.true. ! momentum mapping and PDF storage flag
+.true. ! colour sampling flag
+.false. ! explicit pole check flag, stops integration when set to true
+
+PHYSICAL_PARAMETERS
+8000d0 ! roots
+125d0 ! Mass of the Higgs Boson
+0.004029643852d0 ! Width of the Higgs Boson
+91.1876d0 ! Mass of the Z Boson
+2.4952d0 ! Width of the Z Boson
+80.398d0 ! Mass of the W Boson
+2.1054d0 ! Width of the W Boson
+173.2d0 ! Mass of the Top Quark
+1.41d0 ! Width of the Top Quark
+4.18d0 ! Mass of the Bottom Quark
+0d0 ! Width of the Bottom Quark
+1.275d0 ! Mass of the Charm Quark
+0d0 ! Width of the Charm Quark
+1000d0 ! Mass of the KK graviton
+0d0 ! Width of the KK graviton
+
+! UNIT_PHASE
+
+SELECTORS
+
+ !####### SYNTAX ######################
+ !##
+ !## [select|accept|reject] {observable-name} [min={val_min}] [max={val_max}]
+ !##
+ !#####################################
+ !#
+ !# * comments begin with the character `!` and will be excluded from the parser
+ !# just like this documentation block. This way, one can maintain various setups
+ !# in one runcard and comment in/out parts as needed.
+ !#
+ !# * multiple selectors are combined with a logical "and"
+ !#
+ !# * only necessary to specify at least one of the two: min, max
+ !#
+ !# * if both are set, the order of the min/max specification is irrelevant
+ !#
+ !# * each line here generates a new Selector and it is therefore better to reduce
+ !# the number of lines if possible. For instance the following cases are
+ !# all equivalent and the one-liners should be preferred:
+ !#
+ !# a) select ylp min = -5 ! --> accept [-5, +infty]
+ !# select ylp max = +5 ! --> accept [-infty, +5]
+ !# ! combined: [-5, +5]
+ !#
+ !# b) reject ylp max = -5 ! --> reject [+5, +infty]
+ !# reject ylp min = +5 ! --> reject [-infty, -5]
+ !# ! combined: [-5, +5]
+ !#
+ !# c) select ylp min = -5 max = +5 ! --> accept [-5, +5]
+ !#
+ !# d) select abs_ylp max = +5 ! --> accept |y| < 5 => [-5, +5]
+ !#
+ !# e) reject abs_ylp min = +5 ! --> reject |y| > 5 => [-5, +5]
+ !#
+ !# * the `reject` option actually has a very nice use-case in the exclusion
+ !# of the barrel--endcap region like this
+ !#
+ !# a) select abs_ylp max = +5 ! global selector
+ !# reject abs_ylp min = +1.4442 max = +1.560 ! CMS barrel-endcap region
+ !#
+ !# b) select ylp min = -5 max = -1.560
+ !# select ylp min = -1.4442 max = +1.4442
+ !# select ylp min = +1.560 max = +5
+ !#
+ !# where the second one is clearly more tedious to specify
+ !#
+ !#####################################
+
+
+ !----- jet veto
+ select jets_pt min = 30
+ select jets_abs_y max = 3
+ select jets_abs_eta max = 10
+
+ !----- for Z production we have two leptons (l^[+-] = l[pm])
+ select abs_ylp max=5
+ select abs_ylm max=5
+
+ !----- V = {lp, lm}
+ select mll min = 80 max = 100
+
+ !----- for inclusive ptz
+ !select njets min = 0
+ !select ptz min = 20
+
+END_SELECTORS
+
+
+
+HISTOGRAMS
+
+ !####### SYNTAX ######################
+ !##
+ !## a) equal-sized bins:
+ !## {observable-name}[>{file-name}] nbins={val_nbins} min={val_min} max={val_max}
+ !##
+ !## b) non-uniform bins:
+ !## {observable-name}[>{file-name}] [bound0,bound1,bound2,...,boundN]
+ !##
+ !## *) conditional binning:
+ !## dress a histogram with additional selectors by specifying them inside a block:
+ !##
+ !## HISTOGRAM_SELECTORS
+ !## {SELECTOR}
+ !## .
+ !## .
+ !## .
+ !## END_HISTOGRAM_SELECTORS
+ !##
+ !## where {SELECTOR} follows the same syntax described above. A binning into
+ !## this histogram is then only performed when the event passes all selectors
+ !## specified in this block.
+ !##
+ !#####################################
+ !#
+ !# * comments begin with the character `!` and will be excluded from the parser
+ !#
+ !#####################################
+
+ !----- these are mostly the histograms produced also in the `default` branch
+ !----- parsing works in any order of the assignments `x = val`
+
+ ptj1 nbins = 19 min = 30d0 max = 600d0 grid=ZJ-ptj1.fast
+ etaj1 nbins = 20 min =-3d0 max = 3d0 grid=ZJ-etaj1.fast
+ yz nbins = 20 min =-3d0 max = 3d0 grid=ZJ-yz.fast
+
+END_HISTOGRAMS
+
+
+
+SCALES
+
+ !####### SYNTAX ######################
+ !##
+ !## muf={scale-specifier} mur={scale-specifier}
+ !##
+ !#####################################
+ !#
+ !# * {scale-specifier}
+ !#
+ !# a) fixed scale: [{fac}*] {value}
+ !#
+ !# b) dynamic scale: [{fac}*] {observable-name}
+ !#
+ !# * the observable for dynamic scales must be [GeV] (this is not checked)
+ !#
+ !#####################################
+
+ !----- ZJ paper setup
+ !> fixed scales
+ muf = 91.1876 mur = 91.1876
+ ! muf = 2.0 * 91.1876 mur = 2.0 * 91.1876
+ ! muf = 0.5 * 91.1876 mur = 0.5 * 91.1876
+
+ !> dynamical scales
+ ! muf = mll mur = 2.0 * mll
+ ! muf = 2.0 * mll mur = mll
+
+ !> mix it up?
+ ! muf = 0.5 * mll mur = 1.0 * 91.1876
+ ! muf = 5 mur = 2.0 * ptj1
+
+END_SCALES
+
+
+
+!####### SYNTAX ######################
+!##
+!## REWEIGHT {observable-name}**{val_power}
+!##
+!#####################################
+
+! REWEIGHT ht_part**4
+
+
+
+!####### SYNTAX ######################
+!##
+!## PHOTON_ISOLATION {algorithm} {algorithm-options}
+!##
+!#####################################
+!#
+!# * Frixione:
+!#
+!# PHOTON_ISOLATION frix delta={var} epsilon={var} n={var}
+!#
+!# * cut on sum(ET) inside a cone around the photon:
+!#
+!# PHOTON_ISOLATION etsum delta={var} etmax={var}
+!#
+!#####################################
+
+!PHOTON_ISOLATION frix delta = 0.5 epsilon = 0.1 n = 1
+!PHOTON_ISOLATION etsum delta = 0.5 etmax = 10
+
+
+
+CHANNELS
+
+ !####### SYNTAX ######################
+ !##
+ !## list of process id's (see selectchannelXYZ.f)
+ !##
+ !#####################################
+ !#
+ !# * any number of whitespace-separated process id's in one line allowed
+ !#
+ !# * self-explaning wild-cards:
+ !# - ALL
+ !# - LO, NLO, NNLO
+ !# - V, R
+ !# - VV, RV, RR
+ !#
+ !#####################################
+
+ VV ! process
+
+ ! 1 ! one B channel
+ ! 13 ! one R channel
+ ! 73 ! one V channel
+ ! 163 ! one RR channel
+ ! 317 ! one RV channel
+ ! 617 ! one VV channel
+
+ ! 17 18 31 32 ! qg-initiated R contributions
+
+END_CHANNELS
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ZJ/Testrun/ZJ.NNLO-RRb-fastwarmup.run
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ZJ/Testrun/ZJ.NNLO-RRb-fastwarmup.run (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ZJ/Testrun/ZJ.NNLO-RRb-fastwarmup.run (revision 1772)
@@ -0,0 +1,251 @@
+NNLOJET_RUNCARD
+NNLO-RRb ! Job name id, must be less than 10 characters
+ZJ ! Process name
+@EVENTS@ ! Number of events
+1 ! Number of iterations
+@SEED@ ! Seed number
+.false. ! Warmup
+.true. ! Production
+NNPDF30_nnlo_as_0118 ! PDF set
+antikt ! Jet algorithm, accepts 'kt', 'cam' or 'antikt'
+0.5d0 ! Rcut
+.false. ! exclusive
+1 ! Heavy particle decay type
+1d-7 ! Technical cutoff y0
+.true. ! angular averaging of the phase space, default to true
+2 ! Virtual Integration method, use 2 if you're not sure
+b ! RR a/b region flag. Accepts 'a','b' or 'all'.
+0 ! set to zero for MC, 2 for point test
+.false. ! print max weight flag
+.true. ! momentum mapping and PDF storage flag
+.true. ! colour sampling flag
+.false. ! explicit pole check flag, stops integration when set to true
+
+PHYSICAL_PARAMETERS
+8000d0 ! roots
+125d0 ! Mass of the Higgs Boson
+0.004029643852d0 ! Width of the Higgs Boson
+91.1876d0 ! Mass of the Z Boson
+2.4952d0 ! Width of the Z Boson
+80.398d0 ! Mass of the W Boson
+2.1054d0 ! Width of the W Boson
+173.2d0 ! Mass of the Top Quark
+1.41d0 ! Width of the Top Quark
+4.18d0 ! Mass of the Bottom Quark
+0d0 ! Width of the Bottom Quark
+1.275d0 ! Mass of the Charm Quark
+0d0 ! Width of the Charm Quark
+1000d0 ! Mass of the KK graviton
+0d0 ! Width of the KK graviton
+
+UNIT_PHASE
+
+SELECTORS
+
+ !####### SYNTAX ######################
+ !##
+ !## [select|accept|reject] {observable-name} [min={val_min}] [max={val_max}]
+ !##
+ !#####################################
+ !#
+ !# * comments begin with the character `!` and will be excluded from the parser
+ !# just like this documentation block. This way, one can maintain various setups
+ !# in one runcard and comment in/out parts as needed.
+ !#
+ !# * multiple selectors are combined with a logical "and"
+ !#
+ !# * only necessary to specify at least one of the two: min, max
+ !#
+ !# * if both are set, the order of the min/max specification is irrelevant
+ !#
+ !# * each line here generates a new Selector and it is therefore better to reduce
+ !# the number of lines if possible. For instance the following cases are
+ !# all equivalent and the one-liners should be preferred:
+ !#
+ !# a) select ylp min = -5 ! --> accept [-5, +infty]
+ !# select ylp max = +5 ! --> accept [-infty, +5]
+ !# ! combined: [-5, +5]
+ !#
+ !# b) reject ylp max = -5 ! --> reject [+5, +infty]
+ !# reject ylp min = +5 ! --> reject [-infty, -5]
+ !# ! combined: [-5, +5]
+ !#
+ !# c) select ylp min = -5 max = +5 ! --> accept [-5, +5]
+ !#
+ !# d) select abs_ylp max = +5 ! --> accept |y| < 5 => [-5, +5]
+ !#
+ !# e) reject abs_ylp min = +5 ! --> reject |y| > 5 => [-5, +5]
+ !#
+ !# * the `reject` option actually has a very nice use-case in the exclusion
+ !# of the barrel--endcap region like this
+ !#
+ !# a) select abs_ylp max = +5 ! global selector
+ !# reject abs_ylp min = +1.4442 max = +1.560 ! CMS barrel-endcap region
+ !#
+ !# b) select ylp min = -5 max = -1.560
+ !# select ylp min = -1.4442 max = +1.4442
+ !# select ylp min = +1.560 max = +5
+ !#
+ !# where the second one is clearly more tedious to specify
+ !#
+ !#####################################
+
+
+ !----- jet veto
+ select jets_pt min = 30
+ select jets_abs_y max = 3
+ select jets_abs_eta max = 10
+
+ !----- for Z production we have two leptons (l^[+-] = l[pm])
+ select abs_ylp max=5
+ select abs_ylm max=5
+
+ !----- V = {lp, lm}
+ select mll min = 80 max = 100
+
+ !----- for inclusive ptz
+ !select njets min = 0
+ !select ptz min = 20
+
+END_SELECTORS
+
+
+
+HISTOGRAMS
+
+ !####### SYNTAX ######################
+ !##
+ !## a) equal-sized bins:
+ !## {observable-name}[>{file-name}] nbins={val_nbins} min={val_min} max={val_max}
+ !##
+ !## b) non-uniform bins:
+ !## {observable-name}[>{file-name}] [bound0,bound1,bound2,...,boundN]
+ !##
+ !## *) conditional binning:
+ !## dress a histogram with additional selectors by specifying them inside a block:
+ !##
+ !## HISTOGRAM_SELECTORS
+ !## {SELECTOR}
+ !## .
+ !## .
+ !## .
+ !## END_HISTOGRAM_SELECTORS
+ !##
+ !## where {SELECTOR} follows the same syntax described above. A binning into
+ !## this histogram is then only performed when the event passes all selectors
+ !## specified in this block.
+ !##
+ !#####################################
+ !#
+ !# * comments begin with the character `!` and will be excluded from the parser
+ !#
+ !#####################################
+
+ !----- these are mostly the histograms produced also in the `default` branch
+ !----- parsing works in any order of the assignments `x = val`
+
+ ptj1 nbins = 19 min = 30d0 max = 600d0 grid=ZJ-ptj1.fast
+ etaj1 nbins = 20 min =-3d0 max = 3d0 grid=ZJ-etaj1.fast
+ yz nbins = 20 min =-3d0 max = 3d0 grid=ZJ-yz.fast
+
+END_HISTOGRAMS
+
+
+
+SCALES
+
+ !####### SYNTAX ######################
+ !##
+ !## muf={scale-specifier} mur={scale-specifier}
+ !##
+ !#####################################
+ !#
+ !# * {scale-specifier}
+ !#
+ !# a) fixed scale: [{fac}*] {value}
+ !#
+ !# b) dynamic scale: [{fac}*] {observable-name}
+ !#
+ !# * the observable for dynamic scales must be [GeV] (this is not checked)
+ !#
+ !#####################################
+
+ !----- ZJ paper setup
+ !> fixed scales
+ muf = 91.1876 mur = 91.1876
+ ! muf = 2.0 * 91.1876 mur = 2.0 * 91.1876
+ ! muf = 0.5 * 91.1876 mur = 0.5 * 91.1876
+
+ !> dynamical scales
+ ! muf = mll mur = 2.0 * mll
+ ! muf = 2.0 * mll mur = mll
+
+ !> mix it up?
+ ! muf = 0.5 * mll mur = 1.0 * 91.1876
+ ! muf = 5 mur = 2.0 * ptj1
+
+END_SCALES
+
+
+
+!####### SYNTAX ######################
+!##
+!## REWEIGHT {observable-name}**{val_power}
+!##
+!#####################################
+
+! REWEIGHT ht_part**4
+
+
+
+!####### SYNTAX ######################
+!##
+!## PHOTON_ISOLATION {algorithm} {algorithm-options}
+!##
+!#####################################
+!#
+!# * Frixione:
+!#
+!# PHOTON_ISOLATION frix delta={var} epsilon={var} n={var}
+!#
+!# * cut on sum(ET) inside a cone around the photon:
+!#
+!# PHOTON_ISOLATION etsum delta={var} etmax={var}
+!#
+!#####################################
+
+!PHOTON_ISOLATION frix delta = 0.5 epsilon = 0.1 n = 1
+!PHOTON_ISOLATION etsum delta = 0.5 etmax = 10
+
+
+
+CHANNELS
+
+ !####### SYNTAX ######################
+ !##
+ !## list of process id's (see selectchannelXYZ.f)
+ !##
+ !#####################################
+ !#
+ !# * any number of whitespace-separated process id's in one line allowed
+ !#
+ !# * self-explaning wild-cards:
+ !# - ALL
+ !# - LO, NLO, NNLO
+ !# - V, R
+ !# - VV, RV, RR
+ !#
+ !#####################################
+
+ RR ! process
+
+ ! 1 ! one B channel
+ ! 13 ! one R channel
+ ! 73 ! one V channel
+ ! 163 ! one RR channel
+ ! 317 ! one RV channel
+ ! 617 ! one VV channel
+
+ ! 17 18 31 32 ! qg-initiated R contributions
+
+END_CHANNELS
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ZJ/Testrun/ZJ.NLO-V-fastwarmup.run
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ZJ/Testrun/ZJ.NLO-V-fastwarmup.run (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ZJ/Testrun/ZJ.NLO-V-fastwarmup.run (revision 1772)
@@ -0,0 +1,251 @@
+NNLOJET_RUNCARD
+NLO-V ! Job name id, must be less than 10 characters
+ZJ ! Process name
+@EVENTS@ ! Number of events
+1 ! Number of iterations
+@SEED@ ! Seed number
+.false. ! Warmup
+.true. ! Production
+NNPDF30_nnlo_as_0118 ! PDF set
+antikt ! Jet algorithm, accepts 'kt', 'cam' or 'antikt'
+0.5d0 ! Rcut
+.false. ! exclusive
+1 ! Heavy particle decay type
+1d-7 ! Technical cutoff y0
+.true. ! angular averaging of the phase space, default to true
+2 ! Virtual Integration method, use 2 if you're not sure
+all ! RR a/b region flag. Accepts 'a','b' or 'all'.
+0 ! set to zero for MC, 2 for point test
+.false. ! print max weight flag
+.true. ! momentum mapping and PDF storage flag
+.true. ! colour sampling flag
+.false. ! explicit pole check flag, stops integration when set to true
+
+PHYSICAL_PARAMETERS
+8000d0 ! roots
+125d0 ! Mass of the Higgs Boson
+0.004029643852d0 ! Width of the Higgs Boson
+91.1876d0 ! Mass of the Z Boson
+2.4952d0 ! Width of the Z Boson
+80.398d0 ! Mass of the W Boson
+2.1054d0 ! Width of the W Boson
+173.2d0 ! Mass of the Top Quark
+1.41d0 ! Width of the Top Quark
+4.18d0 ! Mass of the Bottom Quark
+0d0 ! Width of the Bottom Quark
+1.275d0 ! Mass of the Charm Quark
+0d0 ! Width of the Charm Quark
+1000d0 ! Mass of the KK graviton
+0d0 ! Width of the KK graviton
+
+UNIT_PHASE
+
+SELECTORS
+
+ !####### SYNTAX ######################
+ !##
+ !## [select|accept|reject] {observable-name} [min={val_min}] [max={val_max}]
+ !##
+ !#####################################
+ !#
+ !# * comments begin with the character `!` and will be excluded from the parser
+ !# just like this documentation block. This way, one can maintain various setups
+ !# in one runcard and comment in/out parts as needed.
+ !#
+ !# * multiple selectors are combined with a logical "and"
+ !#
+ !# * only necessary to specify at least one of the two: min, max
+ !#
+ !# * if both are set, the order of the min/max specification is irrelevant
+ !#
+ !# * each line here generates a new Selector and it is therefore better to reduce
+ !# the number of lines if possible. For instance the following cases are
+ !# all equivalent and the one-liners should be preferred:
+ !#
+ !# a) select ylp min = -5 ! --> accept [-5, +infty]
+ !# select ylp max = +5 ! --> accept [-infty, +5]
+ !# ! combined: [-5, +5]
+ !#
+ !# b) reject ylp max = -5 ! --> reject [+5, +infty]
+ !# reject ylp min = +5 ! --> reject [-infty, -5]
+ !# ! combined: [-5, +5]
+ !#
+ !# c) select ylp min = -5 max = +5 ! --> accept [-5, +5]
+ !#
+ !# d) select abs_ylp max = +5 ! --> accept |y| < 5 => [-5, +5]
+ !#
+ !# e) reject abs_ylp min = +5 ! --> reject |y| > 5 => [-5, +5]
+ !#
+ !# * the `reject` option actually has a very nice use-case in the exclusion
+ !# of the barrel--endcap region like this
+ !#
+ !# a) select abs_ylp max = +5 ! global selector
+ !# reject abs_ylp min = +1.4442 max = +1.560 ! CMS barrel-endcap region
+ !#
+ !# b) select ylp min = -5 max = -1.560
+ !# select ylp min = -1.4442 max = +1.4442
+ !# select ylp min = +1.560 max = +5
+ !#
+ !# where the second one is clearly more tedious to specify
+ !#
+ !#####################################
+
+
+ !----- jet veto
+ select jets_pt min = 30
+ select jets_abs_y max = 3
+ select jets_abs_eta max = 10
+
+ !----- for Z production we have two leptons (l^[+-] = l[pm])
+ select abs_ylp max=5
+ select abs_ylm max=5
+
+ !----- V = {lp, lm}
+ select mll min = 80 max = 100
+
+ !----- for inclusive ptz
+ !select njets min = 0
+ !select ptz min = 20
+
+END_SELECTORS
+
+
+
+HISTOGRAMS
+
+ !####### SYNTAX ######################
+ !##
+ !## a) equal-sized bins:
+ !## {observable-name}[>{file-name}] nbins={val_nbins} min={val_min} max={val_max}
+ !##
+ !## b) non-uniform bins:
+ !## {observable-name}[>{file-name}] [bound0,bound1,bound2,...,boundN]
+ !##
+ !## *) conditional binning:
+ !## dress a histogram with additional selectors by specifying them inside a block:
+ !##
+ !## HISTOGRAM_SELECTORS
+ !## {SELECTOR}
+ !## .
+ !## .
+ !## .
+ !## END_HISTOGRAM_SELECTORS
+ !##
+ !## where {SELECTOR} follows the same syntax described above. A binning into
+ !## this histogram is then only performed when the event passes all selectors
+ !## specified in this block.
+ !##
+ !#####################################
+ !#
+ !# * comments begin with the character `!` and will be excluded from the parser
+ !#
+ !#####################################
+
+ !----- these are mostly the histograms produced also in the `default` branch
+ !----- parsing works in any order of the assignments `x = val`
+
+ ptj1 nbins = 19 min = 30d0 max = 600d0 grid=ZJ-ptj1.fast
+ etaj1 nbins = 20 min =-3d0 max = 3d0 grid=ZJ-etaj1.fast
+ yz nbins = 20 min =-3d0 max = 3d0 grid=ZJ-yz.fast
+
+END_HISTOGRAMS
+
+
+
+SCALES
+
+ !####### SYNTAX ######################
+ !##
+ !## muf={scale-specifier} mur={scale-specifier}
+ !##
+ !#####################################
+ !#
+ !# * {scale-specifier}
+ !#
+ !# a) fixed scale: [{fac}*] {value}
+ !#
+ !# b) dynamic scale: [{fac}*] {observable-name}
+ !#
+ !# * the observable for dynamic scales must be [GeV] (this is not checked)
+ !#
+ !#####################################
+
+ !----- ZJ paper setup
+ !> fixed scales
+ muf = 91.1876 mur = 91.1876
+ ! muf = 2.0 * 91.1876 mur = 2.0 * 91.1876
+ ! muf = 0.5 * 91.1876 mur = 0.5 * 91.1876
+
+ !> dynamical scales
+ ! muf = mll mur = 2.0 * mll
+ ! muf = 2.0 * mll mur = mll
+
+ !> mix it up?
+ ! muf = 0.5 * mll mur = 1.0 * 91.1876
+ ! muf = 5 mur = 2.0 * ptj1
+
+END_SCALES
+
+
+
+!####### SYNTAX ######################
+!##
+!## REWEIGHT {observable-name}**{val_power}
+!##
+!#####################################
+
+! REWEIGHT ht_part**4
+
+
+
+!####### SYNTAX ######################
+!##
+!## PHOTON_ISOLATION {algorithm} {algorithm-options}
+!##
+!#####################################
+!#
+!# * Frixione:
+!#
+!# PHOTON_ISOLATION frix delta={var} epsilon={var} n={var}
+!#
+!# * cut on sum(ET) inside a cone around the photon:
+!#
+!# PHOTON_ISOLATION etsum delta={var} etmax={var}
+!#
+!#####################################
+
+!PHOTON_ISOLATION frix delta = 0.5 epsilon = 0.1 n = 1
+!PHOTON_ISOLATION etsum delta = 0.5 etmax = 10
+
+
+
+CHANNELS
+
+ !####### SYNTAX ######################
+ !##
+ !## list of process id's (see selectchannelXYZ.f)
+ !##
+ !#####################################
+ !#
+ !# * any number of whitespace-separated process id's in one line allowed
+ !#
+ !# * self-explaning wild-cards:
+ !# - ALL
+ !# - LO, NLO, NNLO
+ !# - V, R
+ !# - VV, RV, RR
+ !#
+ !#####################################
+
+ V ! process
+
+ ! 1 ! one B channel
+ ! 13 ! one R channel
+ ! 73 ! one V channel
+ ! 163 ! one RR channel
+ ! 317 ! one RV channel
+ ! 617 ! one VV channel
+
+ ! 17 18 31 32 ! qg-initiated R contributions
+
+END_CHANNELS
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ZJ/Testrun/ZJ.NNLO-RV-fastwarmup.run
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ZJ/Testrun/ZJ.NNLO-RV-fastwarmup.run (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ZJ/Testrun/ZJ.NNLO-RV-fastwarmup.run (revision 1772)
@@ -0,0 +1,251 @@
+NNLOJET_RUNCARD
+NNLO-RV ! Job name id, must be less than 10 characters
+ZJ ! Process name
+@EVENTS@ ! Number of events
+1 ! Number of iterations
+@SEED@ ! Seed number
+.false. ! Warmup
+.true. ! Production
+NNPDF30_nnlo_as_0118 ! PDF set
+antikt ! Jet algorithm, accepts 'kt', 'cam' or 'antikt'
+0.5d0 ! Rcut
+.false. ! exclusive
+1 ! Heavy particle decay type
+1d-7 ! Technical cutoff y0
+.true. ! angular averaging of the phase space, default to true
+2 ! Virtual Integration method, use 2 if you're not sure
+all ! RR a/b region flag. Accepts 'a','b' or 'all'.
+0 ! set to zero for MC, 2 for point test
+.false. ! print max weight flag
+.true. ! momentum mapping and PDF storage flag
+.true. ! colour sampling flag
+.false. ! explicit pole check flag, stops integration when set to true
+
+PHYSICAL_PARAMETERS
+8000d0 ! roots
+125d0 ! Mass of the Higgs Boson
+0.004029643852d0 ! Width of the Higgs Boson
+91.1876d0 ! Mass of the Z Boson
+2.4952d0 ! Width of the Z Boson
+80.398d0 ! Mass of the W Boson
+2.1054d0 ! Width of the W Boson
+173.2d0 ! Mass of the Top Quark
+1.41d0 ! Width of the Top Quark
+4.18d0 ! Mass of the Bottom Quark
+0d0 ! Width of the Bottom Quark
+1.275d0 ! Mass of the Charm Quark
+0d0 ! Width of the Charm Quark
+1000d0 ! Mass of the KK graviton
+0d0 ! Width of the KK graviton
+
+UNIT_PHASE
+
+SELECTORS
+
+ !####### SYNTAX ######################
+ !##
+ !## [select|accept|reject] {observable-name} [min={val_min}] [max={val_max}]
+ !##
+ !#####################################
+ !#
+ !# * comments begin with the character `!` and will be excluded from the parser
+ !# just like this documentation block. This way, one can maintain various setups
+ !# in one runcard and comment in/out parts as needed.
+ !#
+ !# * multiple selectors are combined with a logical "and"
+ !#
+ !# * only necessary to specify at least one of the two: min, max
+ !#
+ !# * if both are set, the order of the min/max specification is irrelevant
+ !#
+ !# * each line here generates a new Selector and it is therefore better to reduce
+ !# the number of lines if possible. For instance the following cases are
+ !# all equivalent and the one-liners should be preferred:
+ !#
+ !# a) select ylp min = -5 ! --> accept [-5, +infty]
+ !# select ylp max = +5 ! --> accept [-infty, +5]
+ !# ! combined: [-5, +5]
+ !#
+ !# b) reject ylp max = -5 ! --> reject [+5, +infty]
+ !# reject ylp min = +5 ! --> reject [-infty, -5]
+ !# ! combined: [-5, +5]
+ !#
+ !# c) select ylp min = -5 max = +5 ! --> accept [-5, +5]
+ !#
+ !# d) select abs_ylp max = +5 ! --> accept |y| < 5 => [-5, +5]
+ !#
+ !# e) reject abs_ylp min = +5 ! --> reject |y| > 5 => [-5, +5]
+ !#
+ !# * the `reject` option actually has a very nice use-case in the exclusion
+ !# of the barrel--endcap region like this
+ !#
+ !# a) select abs_ylp max = +5 ! global selector
+ !# reject abs_ylp min = +1.4442 max = +1.560 ! CMS barrel-endcap region
+ !#
+ !# b) select ylp min = -5 max = -1.560
+ !# select ylp min = -1.4442 max = +1.4442
+ !# select ylp min = +1.560 max = +5
+ !#
+ !# where the second one is clearly more tedious to specify
+ !#
+ !#####################################
+
+
+ !----- jet veto
+ select jets_pt min = 30
+ select jets_abs_y max = 3
+ select jets_abs_eta max = 10
+
+ !----- for Z production we have two leptons (l^[+-] = l[pm])
+ select abs_ylp max=5
+ select abs_ylm max=5
+
+ !----- V = {lp, lm}
+ select mll min = 80 max = 100
+
+ !----- for inclusive ptz
+ !select njets min = 0
+ !select ptz min = 20
+
+END_SELECTORS
+
+
+
+HISTOGRAMS
+
+ !####### SYNTAX ######################
+ !##
+ !## a) equal-sized bins:
+ !## {observable-name}[>{file-name}] nbins={val_nbins} min={val_min} max={val_max}
+ !##
+ !## b) non-uniform bins:
+ !## {observable-name}[>{file-name}] [bound0,bound1,bound2,...,boundN]
+ !##
+ !## *) conditional binning:
+ !## dress a histogram with additional selectors by specifying them inside a block:
+ !##
+ !## HISTOGRAM_SELECTORS
+ !## {SELECTOR}
+ !## .
+ !## .
+ !## .
+ !## END_HISTOGRAM_SELECTORS
+ !##
+ !## where {SELECTOR} follows the same syntax described above. A binning into
+ !## this histogram is then only performed when the event passes all selectors
+ !## specified in this block.
+ !##
+ !#####################################
+ !#
+ !# * comments begin with the character `!` and will be excluded from the parser
+ !#
+ !#####################################
+
+ !----- these are mostly the histograms produced also in the `default` branch
+ !----- parsing works in any order of the assignments `x = val`
+
+ ptj1 nbins = 19 min = 30d0 max = 600d0 grid=ZJ-ptj1.fast
+ etaj1 nbins = 20 min =-3d0 max = 3d0 grid=ZJ-etaj1.fast
+ yz nbins = 20 min =-3d0 max = 3d0 grid=ZJ-yz.fast
+
+END_HISTOGRAMS
+
+
+
+SCALES
+
+ !####### SYNTAX ######################
+ !##
+ !## muf={scale-specifier} mur={scale-specifier}
+ !##
+ !#####################################
+ !#
+ !# * {scale-specifier}
+ !#
+ !# a) fixed scale: [{fac}*] {value}
+ !#
+ !# b) dynamic scale: [{fac}*] {observable-name}
+ !#
+ !# * the observable for dynamic scales must be [GeV] (this is not checked)
+ !#
+ !#####################################
+
+ !----- ZJ paper setup
+ !> fixed scales
+ muf = 91.1876 mur = 91.1876
+ ! muf = 2.0 * 91.1876 mur = 2.0 * 91.1876
+ ! muf = 0.5 * 91.1876 mur = 0.5 * 91.1876
+
+ !> dynamical scales
+ ! muf = mll mur = 2.0 * mll
+ ! muf = 2.0 * mll mur = mll
+
+ !> mix it up?
+ ! muf = 0.5 * mll mur = 1.0 * 91.1876
+ ! muf = 5 mur = 2.0 * ptj1
+
+END_SCALES
+
+
+
+!####### SYNTAX ######################
+!##
+!## REWEIGHT {observable-name}**{val_power}
+!##
+!#####################################
+
+! REWEIGHT ht_part**4
+
+
+
+!####### SYNTAX ######################
+!##
+!## PHOTON_ISOLATION {algorithm} {algorithm-options}
+!##
+!#####################################
+!#
+!# * Frixione:
+!#
+!# PHOTON_ISOLATION frix delta={var} epsilon={var} n={var}
+!#
+!# * cut on sum(ET) inside a cone around the photon:
+!#
+!# PHOTON_ISOLATION etsum delta={var} etmax={var}
+!#
+!#####################################
+
+!PHOTON_ISOLATION frix delta = 0.5 epsilon = 0.1 n = 1
+!PHOTON_ISOLATION etsum delta = 0.5 etmax = 10
+
+
+
+CHANNELS
+
+ !####### SYNTAX ######################
+ !##
+ !## list of process id's (see selectchannelXYZ.f)
+ !##
+ !#####################################
+ !#
+ !# * any number of whitespace-separated process id's in one line allowed
+ !#
+ !# * self-explaning wild-cards:
+ !# - ALL
+ !# - LO, NLO, NNLO
+ !# - V, R
+ !# - VV, RV, RR
+ !#
+ !#####################################
+
+ RV ! process
+
+ ! 1 ! one B channel
+ ! 13 ! one R channel
+ ! 73 ! one V channel
+ ! 163 ! one RR channel
+ ! 317 ! one RV channel
+ ! 617 ! one VV channel
+
+ ! 17 18 31 32 ! qg-initiated R contributions
+
+END_CHANNELS
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ZJ/Testrun/ZJ.LO-warmup.run
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ZJ/Testrun/ZJ.LO-warmup.run (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ZJ/Testrun/ZJ.LO-warmup.run (revision 1772)
@@ -0,0 +1,251 @@
+NNLOJET_RUNCARD
+LO ! Job name id, must be less than 10 characters
+ZJ ! Process name
+@EVENTS@ ! Number of events
+8 ! Number of iterations
+1 ! Seed number
+.true. ! Warmup
+.false. ! Production
+NNPDF30_nnlo_as_0118 ! PDF set
+antikt ! Jet algorithm, accepts 'kt', 'cam' or 'antikt'
+0.5d0 ! Rcut
+.false. ! exclusive
+1 ! Heavy particle decay type
+1d-7 ! Technical cutoff y0
+.true. ! angular averaging of the phase space, default to true
+2 ! Virtual Integration method, use 2 if you're not sure
+all ! RR a/b region flag. Accepts 'a','b' or 'all'.
+0 ! set to zero for MC, 2 for point test
+.false. ! print max weight flag
+.true. ! momentum mapping and PDF storage flag
+.true. ! colour sampling flag
+.false. ! explicit pole check flag, stops integration when set to true
+
+PHYSICAL_PARAMETERS
+8000d0 ! roots
+125d0 ! Mass of the Higgs Boson
+0.004029643852d0 ! Width of the Higgs Boson
+91.1876d0 ! Mass of the Z Boson
+2.4952d0 ! Width of the Z Boson
+80.398d0 ! Mass of the W Boson
+2.1054d0 ! Width of the W Boson
+173.2d0 ! Mass of the Top Quark
+1.41d0 ! Width of the Top Quark
+4.18d0 ! Mass of the Bottom Quark
+0d0 ! Width of the Bottom Quark
+1.275d0 ! Mass of the Charm Quark
+0d0 ! Width of the Charm Quark
+1000d0 ! Mass of the KK graviton
+0d0 ! Width of the KK graviton
+
+! UNIT_PHASE
+
+SELECTORS
+
+ !####### SYNTAX ######################
+ !##
+ !## [select|accept|reject] {observable-name} [min={val_min}] [max={val_max}]
+ !##
+ !#####################################
+ !#
+ !# * comments begin with the character `!` and will be excluded from the parser
+ !# just like this documentation block. This way, one can maintain various setups
+ !# in one runcard and comment in/out parts as needed.
+ !#
+ !# * multiple selectors are combined with a logical "and"
+ !#
+ !# * only necessary to specify at least one of the two: min, max
+ !#
+ !# * if both are set, the order of the min/max specification is irrelevant
+ !#
+ !# * each line here generates a new Selector and it is therefore better to reduce
+ !# the number of lines if possible. For instance the following cases are
+ !# all equivalent and the one-liners should be preferred:
+ !#
+ !# a) select ylp min = -5 ! --> accept [-5, +infty]
+ !# select ylp max = +5 ! --> accept [-infty, +5]
+ !# ! combined: [-5, +5]
+ !#
+ !# b) reject ylp max = -5 ! --> reject [+5, +infty]
+ !# reject ylp min = +5 ! --> reject [-infty, -5]
+ !# ! combined: [-5, +5]
+ !#
+ !# c) select ylp min = -5 max = +5 ! --> accept [-5, +5]
+ !#
+ !# d) select abs_ylp max = +5 ! --> accept |y| < 5 => [-5, +5]
+ !#
+ !# e) reject abs_ylp min = +5 ! --> reject |y| > 5 => [-5, +5]
+ !#
+ !# * the `reject` option actually has a very nice use-case in the exclusion
+ !# of the barrel--endcap region like this
+ !#
+ !# a) select abs_ylp max = +5 ! global selector
+ !# reject abs_ylp min = +1.4442 max = +1.560 ! CMS barrel-endcap region
+ !#
+ !# b) select ylp min = -5 max = -1.560
+ !# select ylp min = -1.4442 max = +1.4442
+ !# select ylp min = +1.560 max = +5
+ !#
+ !# where the second one is clearly more tedious to specify
+ !#
+ !#####################################
+
+
+ !----- jet veto
+ select jets_pt min = 30
+ select jets_abs_y max = 3
+ select jets_abs_eta max = 10
+
+ !----- for Z production we have two leptons (l^[+-] = l[pm])
+ select abs_ylp max=5
+ select abs_ylm max=5
+
+ !----- V = {lp, lm}
+ select mll min = 80 max = 100
+
+ !----- for inclusive ptz
+ !select njets min = 0
+ !select ptz min = 20
+
+END_SELECTORS
+
+
+
+HISTOGRAMS
+
+ !####### SYNTAX ######################
+ !##
+ !## a) equal-sized bins:
+ !## {observable-name}[>{file-name}] nbins={val_nbins} min={val_min} max={val_max}
+ !##
+ !## b) non-uniform bins:
+ !## {observable-name}[>{file-name}] [bound0,bound1,bound2,...,boundN]
+ !##
+ !## *) conditional binning:
+ !## dress a histogram with additional selectors by specifying them inside a block:
+ !##
+ !## HISTOGRAM_SELECTORS
+ !## {SELECTOR}
+ !## .
+ !## .
+ !## .
+ !## END_HISTOGRAM_SELECTORS
+ !##
+ !## where {SELECTOR} follows the same syntax described above. A binning into
+ !## this histogram is then only performed when the event passes all selectors
+ !## specified in this block.
+ !##
+ !#####################################
+ !#
+ !# * comments begin with the character `!` and will be excluded from the parser
+ !#
+ !#####################################
+
+ !----- these are mostly the histograms produced also in the `default` branch
+ !----- parsing works in any order of the assignments `x = val`
+
+ ptj1 nbins = 19 min = 30d0 max = 600d0
+ etaj1 nbins = 20 min =-3d0 max = 3d0
+ yz nbins = 20 min =-3d0 max = 3d0
+
+END_HISTOGRAMS
+
+
+
+SCALES
+
+ !####### SYNTAX ######################
+ !##
+ !## muf={scale-specifier} mur={scale-specifier}
+ !##
+ !#####################################
+ !#
+ !# * {scale-specifier}
+ !#
+ !# a) fixed scale: [{fac}*] {value}
+ !#
+ !# b) dynamic scale: [{fac}*] {observable-name}
+ !#
+ !# * the observable for dynamic scales must be [GeV] (this is not checked)
+ !#
+ !#####################################
+
+ !----- ZJ paper setup
+ !> fixed scales
+ muf = 91.1876 mur = 91.1876
+ ! muf = 2.0 * 91.1876 mur = 2.0 * 91.1876
+ ! muf = 0.5 * 91.1876 mur = 0.5 * 91.1876
+
+ !> dynamical scales
+ ! muf = mll mur = 2.0 * mll
+ ! muf = 2.0 * mll mur = mll
+
+ !> mix it up?
+ ! muf = 0.5 * mll mur = 1.0 * 91.1876
+ ! muf = 5 mur = 2.0 * ptj1
+
+END_SCALES
+
+
+
+!####### SYNTAX ######################
+!##
+!## REWEIGHT {observable-name}**{val_power}
+!##
+!#####################################
+
+! REWEIGHT ht_part**4
+
+
+
+!####### SYNTAX ######################
+!##
+!## PHOTON_ISOLATION {algorithm} {algorithm-options}
+!##
+!#####################################
+!#
+!# * Frixione:
+!#
+!# PHOTON_ISOLATION frix delta={var} epsilon={var} n={var}
+!#
+!# * cut on sum(ET) inside a cone around the photon:
+!#
+!# PHOTON_ISOLATION etsum delta={var} etmax={var}
+!#
+!#####################################
+
+!PHOTON_ISOLATION frix delta = 0.5 epsilon = 0.1 n = 1
+!PHOTON_ISOLATION etsum delta = 0.5 etmax = 10
+
+
+
+CHANNELS
+
+ !####### SYNTAX ######################
+ !##
+ !## list of process id's (see selectchannelXYZ.f)
+ !##
+ !#####################################
+ !#
+ !# * any number of whitespace-separated process id's in one line allowed
+ !#
+ !# * self-explaning wild-cards:
+ !# - ALL
+ !# - LO, NLO, NNLO
+ !# - V, R
+ !# - VV, RV, RR
+ !#
+ !#####################################
+
+ LO ! process
+
+ ! 1 ! one B channel
+ ! 13 ! one R channel
+ ! 73 ! one V channel
+ ! 163 ! one RR channel
+ ! 317 ! one RV channel
+ ! 617 ! one VV channel
+
+ ! 17 18 31 32 ! qg-initiated R contributions
+
+END_CHANNELS
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ZJ/Testrun/ZJ.NNLO-VV-fastwarmup.run
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ZJ/Testrun/ZJ.NNLO-VV-fastwarmup.run (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ZJ/Testrun/ZJ.NNLO-VV-fastwarmup.run (revision 1772)
@@ -0,0 +1,251 @@
+NNLOJET_RUNCARD
+NNLO-VV ! Job name id, must be less than 10 characters
+ZJ ! Process name
+@EVENTS@ ! Number of events
+1 ! Number of iterations
+@SEED@ ! Seed number
+.false. ! Warmup
+.true. ! Production
+NNPDF30_nnlo_as_0118 ! PDF set
+antikt ! Jet algorithm, accepts 'kt', 'cam' or 'antikt'
+0.5d0 ! Rcut
+.false. ! exclusive
+1 ! Heavy particle decay type
+1d-7 ! Technical cutoff y0
+.true. ! angular averaging of the phase space, default to true
+2 ! Virtual Integration method, use 2 if you're not sure
+all ! RR a/b region flag. Accepts 'a','b' or 'all'.
+0 ! set to zero for MC, 2 for point test
+.false. ! print max weight flag
+.true. ! momentum mapping and PDF storage flag
+.true. ! colour sampling flag
+.false. ! explicit pole check flag, stops integration when set to true
+
+PHYSICAL_PARAMETERS
+8000d0 ! roots
+125d0 ! Mass of the Higgs Boson
+0.004029643852d0 ! Width of the Higgs Boson
+91.1876d0 ! Mass of the Z Boson
+2.4952d0 ! Width of the Z Boson
+80.398d0 ! Mass of the W Boson
+2.1054d0 ! Width of the W Boson
+173.2d0 ! Mass of the Top Quark
+1.41d0 ! Width of the Top Quark
+4.18d0 ! Mass of the Bottom Quark
+0d0 ! Width of the Bottom Quark
+1.275d0 ! Mass of the Charm Quark
+0d0 ! Width of the Charm Quark
+1000d0 ! Mass of the KK graviton
+0d0 ! Width of the KK graviton
+
+UNIT_PHASE
+
+SELECTORS
+
+ !####### SYNTAX ######################
+ !##
+ !## [select|accept|reject] {observable-name} [min={val_min}] [max={val_max}]
+ !##
+ !#####################################
+ !#
+ !# * comments begin with the character `!` and will be excluded from the parser
+ !# just like this documentation block. This way, one can maintain various setups
+ !# in one runcard and comment in/out parts as needed.
+ !#
+ !# * multiple selectors are combined with a logical "and"
+ !#
+ !# * only necessary to specify at least one of the two: min, max
+ !#
+ !# * if both are set, the order of the min/max specification is irrelevant
+ !#
+ !# * each line here generates a new Selector and it is therefore better to reduce
+ !# the number of lines if possible. For instance the following cases are
+ !# all equivalent and the one-liners should be preferred:
+ !#
+ !# a) select ylp min = -5 ! --> accept [-5, +infty]
+ !# select ylp max = +5 ! --> accept [-infty, +5]
+ !# ! combined: [-5, +5]
+ !#
+ !# b) reject ylp max = -5 ! --> reject [+5, +infty]
+ !# reject ylp min = +5 ! --> reject [-infty, -5]
+ !# ! combined: [-5, +5]
+ !#
+ !# c) select ylp min = -5 max = +5 ! --> accept [-5, +5]
+ !#
+ !# d) select abs_ylp max = +5 ! --> accept |y| < 5 => [-5, +5]
+ !#
+ !# e) reject abs_ylp min = +5 ! --> reject |y| > 5 => [-5, +5]
+ !#
+ !# * the `reject` option actually has a very nice use-case in the exclusion
+ !# of the barrel--endcap region like this
+ !#
+ !# a) select abs_ylp max = +5 ! global selector
+ !# reject abs_ylp min = +1.4442 max = +1.560 ! CMS barrel-endcap region
+ !#
+ !# b) select ylp min = -5 max = -1.560
+ !# select ylp min = -1.4442 max = +1.4442
+ !# select ylp min = +1.560 max = +5
+ !#
+ !# where the second one is clearly more tedious to specify
+ !#
+ !#####################################
+
+
+ !----- jet veto
+ select jets_pt min = 30
+ select jets_abs_y max = 3
+ select jets_abs_eta max = 10
+
+ !----- for Z production we have two leptons (l^[+-] = l[pm])
+ select abs_ylp max=5
+ select abs_ylm max=5
+
+ !----- V = {lp, lm}
+ select mll min = 80 max = 100
+
+ !----- for inclusive ptz
+ !select njets min = 0
+ !select ptz min = 20
+
+END_SELECTORS
+
+
+
+HISTOGRAMS
+
+ !####### SYNTAX ######################
+ !##
+ !## a) equal-sized bins:
+ !## {observable-name}[>{file-name}] nbins={val_nbins} min={val_min} max={val_max}
+ !##
+ !## b) non-uniform bins:
+ !## {observable-name}[>{file-name}] [bound0,bound1,bound2,...,boundN]
+ !##
+ !## *) conditional binning:
+ !## dress a histogram with additional selectors by specifying them inside a block:
+ !##
+ !## HISTOGRAM_SELECTORS
+ !## {SELECTOR}
+ !## .
+ !## .
+ !## .
+ !## END_HISTOGRAM_SELECTORS
+ !##
+ !## where {SELECTOR} follows the same syntax described above. A binning into
+ !## this histogram is then only performed when the event passes all selectors
+ !## specified in this block.
+ !##
+ !#####################################
+ !#
+ !# * comments begin with the character `!` and will be excluded from the parser
+ !#
+ !#####################################
+
+ !----- these are mostly the histograms produced also in the `default` branch
+ !----- parsing works in any order of the assignments `x = val`
+
+ ptj1 nbins = 19 min = 30d0 max = 600d0 grid=ZJ-ptj1.fast
+ etaj1 nbins = 20 min =-3d0 max = 3d0 grid=ZJ-etaj1.fast
+ yz nbins = 20 min =-3d0 max = 3d0 grid=ZJ-yz.fast
+
+END_HISTOGRAMS
+
+
+
+SCALES
+
+ !####### SYNTAX ######################
+ !##
+ !## muf={scale-specifier} mur={scale-specifier}
+ !##
+ !#####################################
+ !#
+ !# * {scale-specifier}
+ !#
+ !# a) fixed scale: [{fac}*] {value}
+ !#
+ !# b) dynamic scale: [{fac}*] {observable-name}
+ !#
+ !# * the observable for dynamic scales must be [GeV] (this is not checked)
+ !#
+ !#####################################
+
+ !----- ZJ paper setup
+ !> fixed scales
+ muf = 91.1876 mur = 91.1876
+ ! muf = 2.0 * 91.1876 mur = 2.0 * 91.1876
+ ! muf = 0.5 * 91.1876 mur = 0.5 * 91.1876
+
+ !> dynamical scales
+ ! muf = mll mur = 2.0 * mll
+ ! muf = 2.0 * mll mur = mll
+
+ !> mix it up?
+ ! muf = 0.5 * mll mur = 1.0 * 91.1876
+ ! muf = 5 mur = 2.0 * ptj1
+
+END_SCALES
+
+
+
+!####### SYNTAX ######################
+!##
+!## REWEIGHT {observable-name}**{val_power}
+!##
+!#####################################
+
+! REWEIGHT ht_part**4
+
+
+
+!####### SYNTAX ######################
+!##
+!## PHOTON_ISOLATION {algorithm} {algorithm-options}
+!##
+!#####################################
+!#
+!# * Frixione:
+!#
+!# PHOTON_ISOLATION frix delta={var} epsilon={var} n={var}
+!#
+!# * cut on sum(ET) inside a cone around the photon:
+!#
+!# PHOTON_ISOLATION etsum delta={var} etmax={var}
+!#
+!#####################################
+
+!PHOTON_ISOLATION frix delta = 0.5 epsilon = 0.1 n = 1
+!PHOTON_ISOLATION etsum delta = 0.5 etmax = 10
+
+
+
+CHANNELS
+
+ !####### SYNTAX ######################
+ !##
+ !## list of process id's (see selectchannelXYZ.f)
+ !##
+ !#####################################
+ !#
+ !# * any number of whitespace-separated process id's in one line allowed
+ !#
+ !# * self-explaning wild-cards:
+ !# - ALL
+ !# - LO, NLO, NNLO
+ !# - V, R
+ !# - VV, RV, RR
+ !#
+ !#####################################
+
+ VV ! process
+
+ ! 1 ! one B channel
+ ! 13 ! one R channel
+ ! 73 ! one V channel
+ ! 163 ! one RR channel
+ ! 317 ! one RV channel
+ ! 617 ! one VV channel
+
+ ! 17 18 31 32 ! qg-initiated R contributions
+
+END_CHANNELS
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ZJ/Testrun/ZJ.NLO-R-prod.run
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ZJ/Testrun/ZJ.NLO-R-prod.run (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ZJ/Testrun/ZJ.NLO-R-prod.run (revision 1772)
@@ -0,0 +1,251 @@
+NNLOJET_RUNCARD
+NLO-R ! Job name id, must be less than 10 characters
+ZJ ! Process name
+@EVENTS@ ! Number of events
+1 ! Number of iterations
+@SEED@ ! Seed number
+.false. ! Warmup
+.true. ! Production
+NNPDF30_nnlo_as_0118 ! PDF set
+antikt ! Jet algorithm, accepts 'kt', 'cam' or 'antikt'
+0.5d0 ! Rcut
+.false. ! exclusive
+1 ! Heavy particle decay type
+1d-7 ! Technical cutoff y0
+.true. ! angular averaging of the phase space, default to true
+2 ! Virtual Integration method, use 2 if you're not sure
+all ! RR a/b region flag. Accepts 'a','b' or 'all'.
+0 ! set to zero for MC, 2 for point test
+.false. ! print max weight flag
+.true. ! momentum mapping and PDF storage flag
+.true. ! colour sampling flag
+.false. ! explicit pole check flag, stops integration when set to true
+
+PHYSICAL_PARAMETERS
+8000d0 ! roots
+125d0 ! Mass of the Higgs Boson
+0.004029643852d0 ! Width of the Higgs Boson
+91.1876d0 ! Mass of the Z Boson
+2.4952d0 ! Width of the Z Boson
+80.398d0 ! Mass of the W Boson
+2.1054d0 ! Width of the W Boson
+173.2d0 ! Mass of the Top Quark
+1.41d0 ! Width of the Top Quark
+4.18d0 ! Mass of the Bottom Quark
+0d0 ! Width of the Bottom Quark
+1.275d0 ! Mass of the Charm Quark
+0d0 ! Width of the Charm Quark
+1000d0 ! Mass of the KK graviton
+0d0 ! Width of the KK graviton
+
+! UNIT_PHASE
+
+SELECTORS
+
+ !####### SYNTAX ######################
+ !##
+ !## [select|accept|reject] {observable-name} [min={val_min}] [max={val_max}]
+ !##
+ !#####################################
+ !#
+ !# * comments begin with the character `!` and will be excluded from the parser
+ !# just like this documentation block. This way, one can maintain various setups
+ !# in one runcard and comment in/out parts as needed.
+ !#
+ !# * multiple selectors are combined with a logical "and"
+ !#
+ !# * only necessary to specify at least one of the two: min, max
+ !#
+ !# * if both are set, the order of the min/max specification is irrelevant
+ !#
+ !# * each line here generates a new Selector and it is therefore better to reduce
+ !# the number of lines if possible. For instance the following cases are
+ !# all equivalent and the one-liners should be preferred:
+ !#
+ !# a) select ylp min = -5 ! --> accept [-5, +infty]
+ !# select ylp max = +5 ! --> accept [-infty, +5]
+ !# ! combined: [-5, +5]
+ !#
+ !# b) reject ylp max = -5 ! --> reject [+5, +infty]
+ !# reject ylp min = +5 ! --> reject [-infty, -5]
+ !# ! combined: [-5, +5]
+ !#
+ !# c) select ylp min = -5 max = +5 ! --> accept [-5, +5]
+ !#
+ !# d) select abs_ylp max = +5 ! --> accept |y| < 5 => [-5, +5]
+ !#
+ !# e) reject abs_ylp min = +5 ! --> reject |y| > 5 => [-5, +5]
+ !#
+ !# * the `reject` option actually has a very nice use-case in the exclusion
+ !# of the barrel--endcap region like this
+ !#
+ !# a) select abs_ylp max = +5 ! global selector
+ !# reject abs_ylp min = +1.4442 max = +1.560 ! CMS barrel-endcap region
+ !#
+ !# b) select ylp min = -5 max = -1.560
+ !# select ylp min = -1.4442 max = +1.4442
+ !# select ylp min = +1.560 max = +5
+ !#
+ !# where the second one is clearly more tedious to specify
+ !#
+ !#####################################
+
+
+ !----- jet veto
+ select jets_pt min = 30
+ select jets_abs_y max = 3
+ select jets_abs_eta max = 10
+
+ !----- for Z production we have two leptons (l^[+-] = l[pm])
+ select abs_ylp max=5
+ select abs_ylm max=5
+
+ !----- V = {lp, lm}
+ select mll min = 80 max = 100
+
+ !----- for inclusive ptz
+ !select njets min = 0
+ !select ptz min = 20
+
+END_SELECTORS
+
+
+
+HISTOGRAMS
+
+ !####### SYNTAX ######################
+ !##
+ !## a) equal-sized bins:
+ !## {observable-name}[>{file-name}] nbins={val_nbins} min={val_min} max={val_max}
+ !##
+ !## b) non-uniform bins:
+ !## {observable-name}[>{file-name}] [bound0,bound1,bound2,...,boundN]
+ !##
+ !## *) conditional binning:
+ !## dress a histogram with additional selectors by specifying them inside a block:
+ !##
+ !## HISTOGRAM_SELECTORS
+ !## {SELECTOR}
+ !## .
+ !## .
+ !## .
+ !## END_HISTOGRAM_SELECTORS
+ !##
+ !## where {SELECTOR} follows the same syntax described above. A binning into
+ !## this histogram is then only performed when the event passes all selectors
+ !## specified in this block.
+ !##
+ !#####################################
+ !#
+ !# * comments begin with the character `!` and will be excluded from the parser
+ !#
+ !#####################################
+
+ !----- these are mostly the histograms produced also in the `default` branch
+ !----- parsing works in any order of the assignments `x = val`
+
+ ptj1 nbins = 19 min = 30d0 max = 600d0
+ etaj1 nbins = 20 min =-3d0 max = 3d0
+ yz nbins = 20 min =-3d0 max = 3d0
+
+END_HISTOGRAMS
+
+
+
+SCALES
+
+ !####### SYNTAX ######################
+ !##
+ !## muf={scale-specifier} mur={scale-specifier}
+ !##
+ !#####################################
+ !#
+ !# * {scale-specifier}
+ !#
+ !# a) fixed scale: [{fac}*] {value}
+ !#
+ !# b) dynamic scale: [{fac}*] {observable-name}
+ !#
+ !# * the observable for dynamic scales must be [GeV] (this is not checked)
+ !#
+ !#####################################
+
+ !----- ZJ paper setup
+ !> fixed scales
+ muf = 91.1876 mur = 91.1876
+ ! muf = 2.0 * 91.1876 mur = 2.0 * 91.1876
+ ! muf = 0.5 * 91.1876 mur = 0.5 * 91.1876
+
+ !> dynamical scales
+ ! muf = mll mur = 2.0 * mll
+ ! muf = 2.0 * mll mur = mll
+
+ !> mix it up?
+ ! muf = 0.5 * mll mur = 1.0 * 91.1876
+ ! muf = 5 mur = 2.0 * ptj1
+
+END_SCALES
+
+
+
+!####### SYNTAX ######################
+!##
+!## REWEIGHT {observable-name}**{val_power}
+!##
+!#####################################
+
+! REWEIGHT ht_part**4
+
+
+
+!####### SYNTAX ######################
+!##
+!## PHOTON_ISOLATION {algorithm} {algorithm-options}
+!##
+!#####################################
+!#
+!# * Frixione:
+!#
+!# PHOTON_ISOLATION frix delta={var} epsilon={var} n={var}
+!#
+!# * cut on sum(ET) inside a cone around the photon:
+!#
+!# PHOTON_ISOLATION etsum delta={var} etmax={var}
+!#
+!#####################################
+
+!PHOTON_ISOLATION frix delta = 0.5 epsilon = 0.1 n = 1
+!PHOTON_ISOLATION etsum delta = 0.5 etmax = 10
+
+
+
+CHANNELS
+
+ !####### SYNTAX ######################
+ !##
+ !## list of process id's (see selectchannelXYZ.f)
+ !##
+ !#####################################
+ !#
+ !# * any number of whitespace-separated process id's in one line allowed
+ !#
+ !# * self-explaning wild-cards:
+ !# - ALL
+ !# - LO, NLO, NNLO
+ !# - V, R
+ !# - VV, RV, RR
+ !#
+ !#####################################
+
+ R ! process
+
+ ! 1 ! one B channel
+ ! 13 ! one R channel
+ ! 73 ! one V channel
+ ! 163 ! one RR channel
+ ! 317 ! one RV channel
+ ! 617 ! one VV channel
+
+ ! 17 18 31 32 ! qg-initiated R contributions
+
+END_CHANNELS
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ZJ/Testrun/ZJ.NNLO-RRa-prod.run
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ZJ/Testrun/ZJ.NNLO-RRa-prod.run (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ZJ/Testrun/ZJ.NNLO-RRa-prod.run (revision 1772)
@@ -0,0 +1,251 @@
+NNLOJET_RUNCARD
+NNLO-RRa ! Job name id, must be less than 10 characters
+ZJ ! Process name
+@EVENTS@ ! Number of events
+1 ! Number of iterations
+@SEED@ ! Seed number
+.false. ! Warmup
+.true. ! Production
+NNPDF30_nnlo_as_0118 ! PDF set
+antikt ! Jet algorithm, accepts 'kt', 'cam' or 'antikt'
+0.5d0 ! Rcut
+.false. ! exclusive
+1 ! Heavy particle decay type
+1d-7 ! Technical cutoff y0
+.true. ! angular averaging of the phase space, default to true
+2 ! Virtual Integration method, use 2 if you're not sure
+a ! RR a/b region flag. Accepts 'a','b' or 'all'.
+0 ! set to zero for MC, 2 for point test
+.false. ! print max weight flag
+.true. ! momentum mapping and PDF storage flag
+.true. ! colour sampling flag
+.false. ! explicit pole check flag, stops integration when set to true
+
+PHYSICAL_PARAMETERS
+8000d0 ! roots
+125d0 ! Mass of the Higgs Boson
+0.004029643852d0 ! Width of the Higgs Boson
+91.1876d0 ! Mass of the Z Boson
+2.4952d0 ! Width of the Z Boson
+80.398d0 ! Mass of the W Boson
+2.1054d0 ! Width of the W Boson
+173.2d0 ! Mass of the Top Quark
+1.41d0 ! Width of the Top Quark
+4.18d0 ! Mass of the Bottom Quark
+0d0 ! Width of the Bottom Quark
+1.275d0 ! Mass of the Charm Quark
+0d0 ! Width of the Charm Quark
+1000d0 ! Mass of the KK graviton
+0d0 ! Width of the KK graviton
+
+! UNIT_PHASE
+
+SELECTORS
+
+ !####### SYNTAX ######################
+ !##
+ !## [select|accept|reject] {observable-name} [min={val_min}] [max={val_max}]
+ !##
+ !#####################################
+ !#
+ !# * comments begin with the character `!` and will be excluded from the parser
+ !# just like this documentation block. This way, one can maintain various setups
+ !# in one runcard and comment in/out parts as needed.
+ !#
+ !# * multiple selectors are combined with a logical "and"
+ !#
+ !# * only necessary to specify at least one of the two: min, max
+ !#
+ !# * if both are set, the order of the min/max specification is irrelevant
+ !#
+ !# * each line here generates a new Selector and it is therefore better to reduce
+ !# the number of lines if possible. For instance the following cases are
+ !# all equivalent and the one-liners should be preferred:
+ !#
+ !# a) select ylp min = -5 ! --> accept [-5, +infty]
+ !# select ylp max = +5 ! --> accept [-infty, +5]
+ !# ! combined: [-5, +5]
+ !#
+ !# b) reject ylp max = -5 ! --> reject [+5, +infty]
+ !# reject ylp min = +5 ! --> reject [-infty, -5]
+ !# ! combined: [-5, +5]
+ !#
+ !# c) select ylp min = -5 max = +5 ! --> accept [-5, +5]
+ !#
+ !# d) select abs_ylp max = +5 ! --> accept |y| < 5 => [-5, +5]
+ !#
+ !# e) reject abs_ylp min = +5 ! --> reject |y| > 5 => [-5, +5]
+ !#
+ !# * the `reject` option actually has a very nice use-case in the exclusion
+ !# of the barrel--endcap region like this
+ !#
+ !# a) select abs_ylp max = +5 ! global selector
+ !# reject abs_ylp min = +1.4442 max = +1.560 ! CMS barrel-endcap region
+ !#
+ !# b) select ylp min = -5 max = -1.560
+ !# select ylp min = -1.4442 max = +1.4442
+ !# select ylp min = +1.560 max = +5
+ !#
+ !# where the second one is clearly more tedious to specify
+ !#
+ !#####################################
+
+
+ !----- jet veto
+ select jets_pt min = 30
+ select jets_abs_y max = 3
+ select jets_abs_eta max = 10
+
+ !----- for Z production we have two leptons (l^[+-] = l[pm])
+ select abs_ylp max=5
+ select abs_ylm max=5
+
+ !----- V = {lp, lm}
+ select mll min = 80 max = 100
+
+ !----- for inclusive ptz
+ !select njets min = 0
+ !select ptz min = 20
+
+END_SELECTORS
+
+
+
+HISTOGRAMS
+
+ !####### SYNTAX ######################
+ !##
+ !## a) equal-sized bins:
+ !## {observable-name}[>{file-name}] nbins={val_nbins} min={val_min} max={val_max}
+ !##
+ !## b) non-uniform bins:
+ !## {observable-name}[>{file-name}] [bound0,bound1,bound2,...,boundN]
+ !##
+ !## *) conditional binning:
+ !## dress a histogram with additional selectors by specifying them inside a block:
+ !##
+ !## HISTOGRAM_SELECTORS
+ !## {SELECTOR}
+ !## .
+ !## .
+ !## .
+ !## END_HISTOGRAM_SELECTORS
+ !##
+ !## where {SELECTOR} follows the same syntax described above. A binning into
+ !## this histogram is then only performed when the event passes all selectors
+ !## specified in this block.
+ !##
+ !#####################################
+ !#
+ !# * comments begin with the character `!` and will be excluded from the parser
+ !#
+ !#####################################
+
+ !----- these are mostly the histograms produced also in the `default` branch
+ !----- parsing works in any order of the assignments `x = val`
+
+ ptj1 nbins = 19 min = 30d0 max = 600d0
+ etaj1 nbins = 20 min =-3d0 max = 3d0
+ yz nbins = 20 min =-3d0 max = 3d0
+
+END_HISTOGRAMS
+
+
+
+SCALES
+
+ !####### SYNTAX ######################
+ !##
+ !## muf={scale-specifier} mur={scale-specifier}
+ !##
+ !#####################################
+ !#
+ !# * {scale-specifier}
+ !#
+ !# a) fixed scale: [{fac}*] {value}
+ !#
+ !# b) dynamic scale: [{fac}*] {observable-name}
+ !#
+ !# * the observable for dynamic scales must be [GeV] (this is not checked)
+ !#
+ !#####################################
+
+ !----- ZJ paper setup
+ !> fixed scales
+ muf = 91.1876 mur = 91.1876
+ ! muf = 2.0 * 91.1876 mur = 2.0 * 91.1876
+ ! muf = 0.5 * 91.1876 mur = 0.5 * 91.1876
+
+ !> dynamical scales
+ ! muf = mll mur = 2.0 * mll
+ ! muf = 2.0 * mll mur = mll
+
+ !> mix it up?
+ ! muf = 0.5 * mll mur = 1.0 * 91.1876
+ ! muf = 5 mur = 2.0 * ptj1
+
+END_SCALES
+
+
+
+!####### SYNTAX ######################
+!##
+!## REWEIGHT {observable-name}**{val_power}
+!##
+!#####################################
+
+! REWEIGHT ht_part**4
+
+
+
+!####### SYNTAX ######################
+!##
+!## PHOTON_ISOLATION {algorithm} {algorithm-options}
+!##
+!#####################################
+!#
+!# * Frixione:
+!#
+!# PHOTON_ISOLATION frix delta={var} epsilon={var} n={var}
+!#
+!# * cut on sum(ET) inside a cone around the photon:
+!#
+!# PHOTON_ISOLATION etsum delta={var} etmax={var}
+!#
+!#####################################
+
+!PHOTON_ISOLATION frix delta = 0.5 epsilon = 0.1 n = 1
+!PHOTON_ISOLATION etsum delta = 0.5 etmax = 10
+
+
+
+CHANNELS
+
+ !####### SYNTAX ######################
+ !##
+ !## list of process id's (see selectchannelXYZ.f)
+ !##
+ !#####################################
+ !#
+ !# * any number of whitespace-separated process id's in one line allowed
+ !#
+ !# * self-explaning wild-cards:
+ !# - ALL
+ !# - LO, NLO, NNLO
+ !# - V, R
+ !# - VV, RV, RR
+ !#
+ !#####################################
+
+ RR ! process
+
+ ! 1 ! one B channel
+ ! 13 ! one R channel
+ ! 73 ! one V channel
+ ! 163 ! one RR channel
+ ! 317 ! one RV channel
+ ! 617 ! one VV channel
+
+ ! 17 18 31 32 ! qg-initiated R contributions
+
+END_CHANNELS
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ZJ/Testrun/ZJ.LO-fastprod.run
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ZJ/Testrun/ZJ.LO-fastprod.run (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ZJ/Testrun/ZJ.LO-fastprod.run (revision 1772)
@@ -0,0 +1,251 @@
+NNLOJET_RUNCARD
+LO ! Job name id, must be less than 10 characters
+ZJ ! Process name
+@EVENTS@ ! Number of events
+1 ! Number of iterations
+@SEED@ ! Seed number
+.false. ! Warmup
+.true. ! Production
+NNPDF30_nnlo_as_0118 ! PDF set
+antikt ! Jet algorithm, accepts 'kt', 'cam' or 'antikt'
+0.5d0 ! Rcut
+.false. ! exclusive
+1 ! Heavy particle decay type
+1d-7 ! Technical cutoff y0
+.true. ! angular averaging of the phase space, default to true
+2 ! Virtual Integration method, use 2 if you're not sure
+all ! RR a/b region flag. Accepts 'a','b' or 'all'.
+0 ! set to zero for MC, 2 for point test
+.false. ! print max weight flag
+.true. ! momentum mapping and PDF storage flag
+.true. ! colour sampling flag
+.false. ! explicit pole check flag, stops integration when set to true
+
+PHYSICAL_PARAMETERS
+8000d0 ! roots
+125d0 ! Mass of the Higgs Boson
+0.004029643852d0 ! Width of the Higgs Boson
+91.1876d0 ! Mass of the Z Boson
+2.4952d0 ! Width of the Z Boson
+80.398d0 ! Mass of the W Boson
+2.1054d0 ! Width of the W Boson
+173.2d0 ! Mass of the Top Quark
+1.41d0 ! Width of the Top Quark
+4.18d0 ! Mass of the Bottom Quark
+0d0 ! Width of the Bottom Quark
+1.275d0 ! Mass of the Charm Quark
+0d0 ! Width of the Charm Quark
+1000d0 ! Mass of the KK graviton
+0d0 ! Width of the KK graviton
+
+! UNIT_PHASE
+
+SELECTORS
+
+ !####### SYNTAX ######################
+ !##
+ !## [select|accept|reject] {observable-name} [min={val_min}] [max={val_max}]
+ !##
+ !#####################################
+ !#
+ !# * comments begin with the character `!` and will be excluded from the parser
+ !# just like this documentation block. This way, one can maintain various setups
+ !# in one runcard and comment in/out parts as needed.
+ !#
+ !# * multiple selectors are combined with a logical "and"
+ !#
+ !# * only necessary to specify at least one of the two: min, max
+ !#
+ !# * if both are set, the order of the min/max specification is irrelevant
+ !#
+ !# * each line here generates a new Selector and it is therefore better to reduce
+ !# the number of lines if possible. For instance the following cases are
+ !# all equivalent and the one-liners should be preferred:
+ !#
+ !# a) select ylp min = -5 ! --> accept [-5, +infty]
+ !# select ylp max = +5 ! --> accept [-infty, +5]
+ !# ! combined: [-5, +5]
+ !#
+ !# b) reject ylp max = -5 ! --> reject [+5, +infty]
+ !# reject ylp min = +5 ! --> reject [-infty, -5]
+ !# ! combined: [-5, +5]
+ !#
+ !# c) select ylp min = -5 max = +5 ! --> accept [-5, +5]
+ !#
+ !# d) select abs_ylp max = +5 ! --> accept |y| < 5 => [-5, +5]
+ !#
+ !# e) reject abs_ylp min = +5 ! --> reject |y| > 5 => [-5, +5]
+ !#
+ !# * the `reject` option actually has a very nice use-case in the exclusion
+ !# of the barrel--endcap region like this
+ !#
+ !# a) select abs_ylp max = +5 ! global selector
+ !# reject abs_ylp min = +1.4442 max = +1.560 ! CMS barrel-endcap region
+ !#
+ !# b) select ylp min = -5 max = -1.560
+ !# select ylp min = -1.4442 max = +1.4442
+ !# select ylp min = +1.560 max = +5
+ !#
+ !# where the second one is clearly more tedious to specify
+ !#
+ !#####################################
+
+
+ !----- jet veto
+ select jets_pt min = 30
+ select jets_abs_y max = 3
+ select jets_abs_eta max = 10
+
+ !----- for Z production we have two leptons (l^[+-] = l[pm])
+ select abs_ylp max=5
+ select abs_ylm max=5
+
+ !----- V = {lp, lm}
+ select mll min = 80 max = 100
+
+ !----- for inclusive ptz
+ !select njets min = 0
+ !select ptz min = 20
+
+END_SELECTORS
+
+
+
+HISTOGRAMS
+
+ !####### SYNTAX ######################
+ !##
+ !## a) equal-sized bins:
+ !## {observable-name}[>{file-name}] nbins={val_nbins} min={val_min} max={val_max}
+ !##
+ !## b) non-uniform bins:
+ !## {observable-name}[>{file-name}] [bound0,bound1,bound2,...,boundN]
+ !##
+ !## *) conditional binning:
+ !## dress a histogram with additional selectors by specifying them inside a block:
+ !##
+ !## HISTOGRAM_SELECTORS
+ !## {SELECTOR}
+ !## .
+ !## .
+ !## .
+ !## END_HISTOGRAM_SELECTORS
+ !##
+ !## where {SELECTOR} follows the same syntax described above. A binning into
+ !## this histogram is then only performed when the event passes all selectors
+ !## specified in this block.
+ !##
+ !#####################################
+ !#
+ !# * comments begin with the character `!` and will be excluded from the parser
+ !#
+ !#####################################
+
+ !----- these are mostly the histograms produced also in the `default` branch
+ !----- parsing works in any order of the assignments `x = val`
+
+ ptj1 nbins = 19 min = 30d0 max = 600d0 grid=ZJ-ptj1.fast
+ etaj1 nbins = 20 min =-3d0 max = 3d0 grid=ZJ-etaj1.fast
+ yz nbins = 20 min =-3d0 max = 3d0 grid=ZJ-yz.fast
+
+END_HISTOGRAMS
+
+
+
+SCALES
+
+ !####### SYNTAX ######################
+ !##
+ !## muf={scale-specifier} mur={scale-specifier}
+ !##
+ !#####################################
+ !#
+ !# * {scale-specifier}
+ !#
+ !# a) fixed scale: [{fac}*] {value}
+ !#
+ !# b) dynamic scale: [{fac}*] {observable-name}
+ !#
+ !# * the observable for dynamic scales must be [GeV] (this is not checked)
+ !#
+ !#####################################
+
+ !----- ZJ paper setup
+ !> fixed scales
+ muf = 91.1876 mur = 91.1876
+ ! muf = 2.0 * 91.1876 mur = 2.0 * 91.1876
+ ! muf = 0.5 * 91.1876 mur = 0.5 * 91.1876
+
+ !> dynamical scales
+ ! muf = mll mur = 2.0 * mll
+ ! muf = 2.0 * mll mur = mll
+
+ !> mix it up?
+ ! muf = 0.5 * mll mur = 1.0 * 91.1876
+ ! muf = 5 mur = 2.0 * ptj1
+
+END_SCALES
+
+
+
+!####### SYNTAX ######################
+!##
+!## REWEIGHT {observable-name}**{val_power}
+!##
+!#####################################
+
+! REWEIGHT ht_part**4
+
+
+
+!####### SYNTAX ######################
+!##
+!## PHOTON_ISOLATION {algorithm} {algorithm-options}
+!##
+!#####################################
+!#
+!# * Frixione:
+!#
+!# PHOTON_ISOLATION frix delta={var} epsilon={var} n={var}
+!#
+!# * cut on sum(ET) inside a cone around the photon:
+!#
+!# PHOTON_ISOLATION etsum delta={var} etmax={var}
+!#
+!#####################################
+
+!PHOTON_ISOLATION frix delta = 0.5 epsilon = 0.1 n = 1
+!PHOTON_ISOLATION etsum delta = 0.5 etmax = 10
+
+
+
+CHANNELS
+
+ !####### SYNTAX ######################
+ !##
+ !## list of process id's (see selectchannelXYZ.f)
+ !##
+ !#####################################
+ !#
+ !# * any number of whitespace-separated process id's in one line allowed
+ !#
+ !# * self-explaning wild-cards:
+ !# - ALL
+ !# - LO, NLO, NNLO
+ !# - V, R
+ !# - VV, RV, RR
+ !#
+ !#####################################
+
+ LO ! process
+
+ ! 1 ! one B channel
+ ! 13 ! one R channel
+ ! 73 ! one V channel
+ ! 163 ! one RR channel
+ ! 317 ! one RV channel
+ ! 617 ! one VV channel
+
+ ! 17 18 31 32 ! qg-initiated R contributions
+
+END_CHANNELS
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ZJ/Testrun/ZJ.NNLO-RRb-prod.run
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ZJ/Testrun/ZJ.NNLO-RRb-prod.run (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ZJ/Testrun/ZJ.NNLO-RRb-prod.run (revision 1772)
@@ -0,0 +1,251 @@
+NNLOJET_RUNCARD
+NNLO-RRb ! Job name id, must be less than 10 characters
+ZJ ! Process name
+@EVENTS@ ! Number of events
+1 ! Number of iterations
+@SEED@ ! Seed number
+.false. ! Warmup
+.true. ! Production
+NNPDF30_nnlo_as_0118 ! PDF set
+antikt ! Jet algorithm, accepts 'kt', 'cam' or 'antikt'
+0.5d0 ! Rcut
+.false. ! exclusive
+1 ! Heavy particle decay type
+1d-7 ! Technical cutoff y0
+.true. ! angular averaging of the phase space, default to true
+2 ! Virtual Integration method, use 2 if you're not sure
+b ! RR a/b region flag. Accepts 'a','b' or 'all'.
+0 ! set to zero for MC, 2 for point test
+.false. ! print max weight flag
+.true. ! momentum mapping and PDF storage flag
+.true. ! colour sampling flag
+.false. ! explicit pole check flag, stops integration when set to true
+
+PHYSICAL_PARAMETERS
+8000d0 ! roots
+125d0 ! Mass of the Higgs Boson
+0.004029643852d0 ! Width of the Higgs Boson
+91.1876d0 ! Mass of the Z Boson
+2.4952d0 ! Width of the Z Boson
+80.398d0 ! Mass of the W Boson
+2.1054d0 ! Width of the W Boson
+173.2d0 ! Mass of the Top Quark
+1.41d0 ! Width of the Top Quark
+4.18d0 ! Mass of the Bottom Quark
+0d0 ! Width of the Bottom Quark
+1.275d0 ! Mass of the Charm Quark
+0d0 ! Width of the Charm Quark
+1000d0 ! Mass of the KK graviton
+0d0 ! Width of the KK graviton
+
+! UNIT_PHASE
+
+SELECTORS
+
+ !####### SYNTAX ######################
+ !##
+ !## [select|accept|reject] {observable-name} [min={val_min}] [max={val_max}]
+ !##
+ !#####################################
+ !#
+ !# * comments begin with the character `!` and will be excluded from the parser
+ !# just like this documentation block. This way, one can maintain various setups
+ !# in one runcard and comment in/out parts as needed.
+ !#
+ !# * multiple selectors are combined with a logical "and"
+ !#
+ !# * only necessary to specify at least one of the two: min, max
+ !#
+ !# * if both are set, the order of the min/max specification is irrelevant
+ !#
+ !# * each line here generates a new Selector and it is therefore better to reduce
+ !# the number of lines if possible. For instance the following cases are
+ !# all equivalent and the one-liners should be preferred:
+ !#
+ !# a) select ylp min = -5 ! --> accept [-5, +infty]
+ !# select ylp max = +5 ! --> accept [-infty, +5]
+ !# ! combined: [-5, +5]
+ !#
+ !# b) reject ylp max = -5 ! --> reject [+5, +infty]
+ !# reject ylp min = +5 ! --> reject [-infty, -5]
+ !# ! combined: [-5, +5]
+ !#
+ !# c) select ylp min = -5 max = +5 ! --> accept [-5, +5]
+ !#
+ !# d) select abs_ylp max = +5 ! --> accept |y| < 5 => [-5, +5]
+ !#
+ !# e) reject abs_ylp min = +5 ! --> reject |y| > 5 => [-5, +5]
+ !#
+ !# * the `reject` option actually has a very nice use-case in the exclusion
+ !# of the barrel--endcap region like this
+ !#
+ !# a) select abs_ylp max = +5 ! global selector
+ !# reject abs_ylp min = +1.4442 max = +1.560 ! CMS barrel-endcap region
+ !#
+ !# b) select ylp min = -5 max = -1.560
+ !# select ylp min = -1.4442 max = +1.4442
+ !# select ylp min = +1.560 max = +5
+ !#
+ !# where the second one is clearly more tedious to specify
+ !#
+ !#####################################
+
+
+ !----- jet veto
+ select jets_pt min = 30
+ select jets_abs_y max = 3
+ select jets_abs_eta max = 10
+
+ !----- for Z production we have two leptons (l^[+-] = l[pm])
+ select abs_ylp max=5
+ select abs_ylm max=5
+
+ !----- V = {lp, lm}
+ select mll min = 80 max = 100
+
+ !----- for inclusive ptz
+ !select njets min = 0
+ !select ptz min = 20
+
+END_SELECTORS
+
+
+
+HISTOGRAMS
+
+ !####### SYNTAX ######################
+ !##
+ !## a) equal-sized bins:
+ !## {observable-name}[>{file-name}] nbins={val_nbins} min={val_min} max={val_max}
+ !##
+ !## b) non-uniform bins:
+ !## {observable-name}[>{file-name}] [bound0,bound1,bound2,...,boundN]
+ !##
+ !## *) conditional binning:
+ !## dress a histogram with additional selectors by specifying them inside a block:
+ !##
+ !## HISTOGRAM_SELECTORS
+ !## {SELECTOR}
+ !## .
+ !## .
+ !## .
+ !## END_HISTOGRAM_SELECTORS
+ !##
+ !## where {SELECTOR} follows the same syntax described above. A binning into
+ !## this histogram is then only performed when the event passes all selectors
+ !## specified in this block.
+ !##
+ !#####################################
+ !#
+ !# * comments begin with the character `!` and will be excluded from the parser
+ !#
+ !#####################################
+
+ !----- these are mostly the histograms produced also in the `default` branch
+ !----- parsing works in any order of the assignments `x = val`
+
+ ptj1 nbins = 19 min = 30d0 max = 600d0
+ etaj1 nbins = 20 min =-3d0 max = 3d0
+ yz nbins = 20 min =-3d0 max = 3d0
+
+END_HISTOGRAMS
+
+
+
+SCALES
+
+ !####### SYNTAX ######################
+ !##
+ !## muf={scale-specifier} mur={scale-specifier}
+ !##
+ !#####################################
+ !#
+ !# * {scale-specifier}
+ !#
+ !# a) fixed scale: [{fac}*] {value}
+ !#
+ !# b) dynamic scale: [{fac}*] {observable-name}
+ !#
+ !# * the observable for dynamic scales must be [GeV] (this is not checked)
+ !#
+ !#####################################
+
+ !----- ZJ paper setup
+ !> fixed scales
+ muf = 91.1876 mur = 91.1876
+ ! muf = 2.0 * 91.1876 mur = 2.0 * 91.1876
+ ! muf = 0.5 * 91.1876 mur = 0.5 * 91.1876
+
+ !> dynamical scales
+ ! muf = mll mur = 2.0 * mll
+ ! muf = 2.0 * mll mur = mll
+
+ !> mix it up?
+ ! muf = 0.5 * mll mur = 1.0 * 91.1876
+ ! muf = 5 mur = 2.0 * ptj1
+
+END_SCALES
+
+
+
+!####### SYNTAX ######################
+!##
+!## REWEIGHT {observable-name}**{val_power}
+!##
+!#####################################
+
+! REWEIGHT ht_part**4
+
+
+
+!####### SYNTAX ######################
+!##
+!## PHOTON_ISOLATION {algorithm} {algorithm-options}
+!##
+!#####################################
+!#
+!# * Frixione:
+!#
+!# PHOTON_ISOLATION frix delta={var} epsilon={var} n={var}
+!#
+!# * cut on sum(ET) inside a cone around the photon:
+!#
+!# PHOTON_ISOLATION etsum delta={var} etmax={var}
+!#
+!#####################################
+
+!PHOTON_ISOLATION frix delta = 0.5 epsilon = 0.1 n = 1
+!PHOTON_ISOLATION etsum delta = 0.5 etmax = 10
+
+
+
+CHANNELS
+
+ !####### SYNTAX ######################
+ !##
+ !## list of process id's (see selectchannelXYZ.f)
+ !##
+ !#####################################
+ !#
+ !# * any number of whitespace-separated process id's in one line allowed
+ !#
+ !# * self-explaning wild-cards:
+ !# - ALL
+ !# - LO, NLO, NNLO
+ !# - V, R
+ !# - VV, RV, RR
+ !#
+ !#####################################
+
+ RR ! process
+
+ ! 1 ! one B channel
+ ! 13 ! one R channel
+ ! 73 ! one V channel
+ ! 163 ! one RR channel
+ ! 317 ! one RV channel
+ ! 617 ! one VV channel
+
+ ! 17 18 31 32 ! qg-initiated R contributions
+
+END_CHANNELS
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ZJ/Testrun/ZJ.NLO-V-prod.run
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ZJ/Testrun/ZJ.NLO-V-prod.run (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ZJ/Testrun/ZJ.NLO-V-prod.run (revision 1772)
@@ -0,0 +1,251 @@
+NNLOJET_RUNCARD
+NLO-V ! Job name id, must be less than 10 characters
+ZJ ! Process name
+@EVENTS@ ! Number of events
+1 ! Number of iterations
+@SEED@ ! Seed number
+.false. ! Warmup
+.true. ! Production
+NNPDF30_nnlo_as_0118 ! PDF set
+antikt ! Jet algorithm, accepts 'kt', 'cam' or 'antikt'
+0.5d0 ! Rcut
+.false. ! exclusive
+1 ! Heavy particle decay type
+1d-7 ! Technical cutoff y0
+.true. ! angular averaging of the phase space, default to true
+2 ! Virtual Integration method, use 2 if you're not sure
+all ! RR a/b region flag. Accepts 'a','b' or 'all'.
+0 ! set to zero for MC, 2 for point test
+.false. ! print max weight flag
+.true. ! momentum mapping and PDF storage flag
+.true. ! colour sampling flag
+.false. ! explicit pole check flag, stops integration when set to true
+
+PHYSICAL_PARAMETERS
+8000d0 ! roots
+125d0 ! Mass of the Higgs Boson
+0.004029643852d0 ! Width of the Higgs Boson
+91.1876d0 ! Mass of the Z Boson
+2.4952d0 ! Width of the Z Boson
+80.398d0 ! Mass of the W Boson
+2.1054d0 ! Width of the W Boson
+173.2d0 ! Mass of the Top Quark
+1.41d0 ! Width of the Top Quark
+4.18d0 ! Mass of the Bottom Quark
+0d0 ! Width of the Bottom Quark
+1.275d0 ! Mass of the Charm Quark
+0d0 ! Width of the Charm Quark
+1000d0 ! Mass of the KK graviton
+0d0 ! Width of the KK graviton
+
+! UNIT_PHASE
+
+SELECTORS
+
+ !####### SYNTAX ######################
+ !##
+ !## [select|accept|reject] {observable-name} [min={val_min}] [max={val_max}]
+ !##
+ !#####################################
+ !#
+ !# * comments begin with the character `!` and will be excluded from the parser
+ !# just like this documentation block. This way, one can maintain various setups
+ !# in one runcard and comment in/out parts as needed.
+ !#
+ !# * multiple selectors are combined with a logical "and"
+ !#
+ !# * only necessary to specify at least one of the two: min, max
+ !#
+ !# * if both are set, the order of the min/max specification is irrelevant
+ !#
+ !# * each line here generates a new Selector and it is therefore better to reduce
+ !# the number of lines if possible. For instance the following cases are
+ !# all equivalent and the one-liners should be preferred:
+ !#
+ !# a) select ylp min = -5 ! --> accept [-5, +infty]
+ !# select ylp max = +5 ! --> accept [-infty, +5]
+ !# ! combined: [-5, +5]
+ !#
+ !# b) reject ylp max = -5 ! --> reject [+5, +infty]
+ !# reject ylp min = +5 ! --> reject [-infty, -5]
+ !# ! combined: [-5, +5]
+ !#
+ !# c) select ylp min = -5 max = +5 ! --> accept [-5, +5]
+ !#
+ !# d) select abs_ylp max = +5 ! --> accept |y| < 5 => [-5, +5]
+ !#
+ !# e) reject abs_ylp min = +5 ! --> reject |y| > 5 => [-5, +5]
+ !#
+ !# * the `reject` option actually has a very nice use-case in the exclusion
+ !# of the barrel--endcap region like this
+ !#
+ !# a) select abs_ylp max = +5 ! global selector
+ !# reject abs_ylp min = +1.4442 max = +1.560 ! CMS barrel-endcap region
+ !#
+ !# b) select ylp min = -5 max = -1.560
+ !# select ylp min = -1.4442 max = +1.4442
+ !# select ylp min = +1.560 max = +5
+ !#
+ !# where the second one is clearly more tedious to specify
+ !#
+ !#####################################
+
+
+ !----- jet veto
+ select jets_pt min = 30
+ select jets_abs_y max = 3
+ select jets_abs_eta max = 10
+
+ !----- for Z production we have two leptons (l^[+-] = l[pm])
+ select abs_ylp max=5
+ select abs_ylm max=5
+
+ !----- V = {lp, lm}
+ select mll min = 80 max = 100
+
+ !----- for inclusive ptz
+ !select njets min = 0
+ !select ptz min = 20
+
+END_SELECTORS
+
+
+
+HISTOGRAMS
+
+ !####### SYNTAX ######################
+ !##
+ !## a) equal-sized bins:
+ !## {observable-name}[>{file-name}] nbins={val_nbins} min={val_min} max={val_max}
+ !##
+ !## b) non-uniform bins:
+ !## {observable-name}[>{file-name}] [bound0,bound1,bound2,...,boundN]
+ !##
+ !## *) conditional binning:
+ !## dress a histogram with additional selectors by specifying them inside a block:
+ !##
+ !## HISTOGRAM_SELECTORS
+ !## {SELECTOR}
+ !## .
+ !## .
+ !## .
+ !## END_HISTOGRAM_SELECTORS
+ !##
+ !## where {SELECTOR} follows the same syntax described above. A binning into
+ !## this histogram is then only performed when the event passes all selectors
+ !## specified in this block.
+ !##
+ !#####################################
+ !#
+ !# * comments begin with the character `!` and will be excluded from the parser
+ !#
+ !#####################################
+
+ !----- these are mostly the histograms produced also in the `default` branch
+ !----- parsing works in any order of the assignments `x = val`
+
+ ptj1 nbins = 19 min = 30d0 max = 600d0
+ etaj1 nbins = 20 min =-3d0 max = 3d0
+ yz nbins = 20 min =-3d0 max = 3d0
+
+END_HISTOGRAMS
+
+
+
+SCALES
+
+ !####### SYNTAX ######################
+ !##
+ !## muf={scale-specifier} mur={scale-specifier}
+ !##
+ !#####################################
+ !#
+ !# * {scale-specifier}
+ !#
+ !# a) fixed scale: [{fac}*] {value}
+ !#
+ !# b) dynamic scale: [{fac}*] {observable-name}
+ !#
+ !# * the observable for dynamic scales must be [GeV] (this is not checked)
+ !#
+ !#####################################
+
+ !----- ZJ paper setup
+ !> fixed scales
+ muf = 91.1876 mur = 91.1876
+ ! muf = 2.0 * 91.1876 mur = 2.0 * 91.1876
+ ! muf = 0.5 * 91.1876 mur = 0.5 * 91.1876
+
+ !> dynamical scales
+ ! muf = mll mur = 2.0 * mll
+ ! muf = 2.0 * mll mur = mll
+
+ !> mix it up?
+ ! muf = 0.5 * mll mur = 1.0 * 91.1876
+ ! muf = 5 mur = 2.0 * ptj1
+
+END_SCALES
+
+
+
+!####### SYNTAX ######################
+!##
+!## REWEIGHT {observable-name}**{val_power}
+!##
+!#####################################
+
+! REWEIGHT ht_part**4
+
+
+
+!####### SYNTAX ######################
+!##
+!## PHOTON_ISOLATION {algorithm} {algorithm-options}
+!##
+!#####################################
+!#
+!# * Frixione:
+!#
+!# PHOTON_ISOLATION frix delta={var} epsilon={var} n={var}
+!#
+!# * cut on sum(ET) inside a cone around the photon:
+!#
+!# PHOTON_ISOLATION etsum delta={var} etmax={var}
+!#
+!#####################################
+
+!PHOTON_ISOLATION frix delta = 0.5 epsilon = 0.1 n = 1
+!PHOTON_ISOLATION etsum delta = 0.5 etmax = 10
+
+
+
+CHANNELS
+
+ !####### SYNTAX ######################
+ !##
+ !## list of process id's (see selectchannelXYZ.f)
+ !##
+ !#####################################
+ !#
+ !# * any number of whitespace-separated process id's in one line allowed
+ !#
+ !# * self-explaning wild-cards:
+ !# - ALL
+ !# - LO, NLO, NNLO
+ !# - V, R
+ !# - VV, RV, RR
+ !#
+ !#####################################
+
+ V ! process
+
+ ! 1 ! one B channel
+ ! 13 ! one R channel
+ ! 73 ! one V channel
+ ! 163 ! one RR channel
+ ! 317 ! one RV channel
+ ! 617 ! one VV channel
+
+ ! 17 18 31 32 ! qg-initiated R contributions
+
+END_CHANNELS
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ZJ/Testrun/ZJ.NNLO-RV-prod.run
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ZJ/Testrun/ZJ.NNLO-RV-prod.run (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ZJ/Testrun/ZJ.NNLO-RV-prod.run (revision 1772)
@@ -0,0 +1,251 @@
+NNLOJET_RUNCARD
+NNLO-RV ! Job name id, must be less than 10 characters
+ZJ ! Process name
+@EVENTS@ ! Number of events
+1 ! Number of iterations
+@SEED@ ! Seed number
+.false. ! Warmup
+.true. ! Production
+NNPDF30_nnlo_as_0118 ! PDF set
+antikt ! Jet algorithm, accepts 'kt', 'cam' or 'antikt'
+0.5d0 ! Rcut
+.false. ! exclusive
+1 ! Heavy particle decay type
+1d-7 ! Technical cutoff y0
+.true. ! angular averaging of the phase space, default to true
+2 ! Virtual Integration method, use 2 if you're not sure
+all ! RR a/b region flag. Accepts 'a','b' or 'all'.
+0 ! set to zero for MC, 2 for point test
+.false. ! print max weight flag
+.true. ! momentum mapping and PDF storage flag
+.true. ! colour sampling flag
+.false. ! explicit pole check flag, stops integration when set to true
+
+PHYSICAL_PARAMETERS
+8000d0 ! roots
+125d0 ! Mass of the Higgs Boson
+0.004029643852d0 ! Width of the Higgs Boson
+91.1876d0 ! Mass of the Z Boson
+2.4952d0 ! Width of the Z Boson
+80.398d0 ! Mass of the W Boson
+2.1054d0 ! Width of the W Boson
+173.2d0 ! Mass of the Top Quark
+1.41d0 ! Width of the Top Quark
+4.18d0 ! Mass of the Bottom Quark
+0d0 ! Width of the Bottom Quark
+1.275d0 ! Mass of the Charm Quark
+0d0 ! Width of the Charm Quark
+1000d0 ! Mass of the KK graviton
+0d0 ! Width of the KK graviton
+
+! UNIT_PHASE
+
+SELECTORS
+
+ !####### SYNTAX ######################
+ !##
+ !## [select|accept|reject] {observable-name} [min={val_min}] [max={val_max}]
+ !##
+ !#####################################
+ !#
+ !# * comments begin with the character `!` and will be excluded from the parser
+ !# just like this documentation block. This way, one can maintain various setups
+ !# in one runcard and comment in/out parts as needed.
+ !#
+ !# * multiple selectors are combined with a logical "and"
+ !#
+ !# * only necessary to specify at least one of the two: min, max
+ !#
+ !# * if both are set, the order of the min/max specification is irrelevant
+ !#
+ !# * each line here generates a new Selector and it is therefore better to reduce
+ !# the number of lines if possible. For instance the following cases are
+ !# all equivalent and the one-liners should be preferred:
+ !#
+ !# a) select ylp min = -5 ! --> accept [-5, +infty]
+ !# select ylp max = +5 ! --> accept [-infty, +5]
+ !# ! combined: [-5, +5]
+ !#
+ !# b) reject ylp max = -5 ! --> reject [+5, +infty]
+ !# reject ylp min = +5 ! --> reject [-infty, -5]
+ !# ! combined: [-5, +5]
+ !#
+ !# c) select ylp min = -5 max = +5 ! --> accept [-5, +5]
+ !#
+ !# d) select abs_ylp max = +5 ! --> accept |y| < 5 => [-5, +5]
+ !#
+ !# e) reject abs_ylp min = +5 ! --> reject |y| > 5 => [-5, +5]
+ !#
+ !# * the `reject` option actually has a very nice use-case in the exclusion
+ !# of the barrel--endcap region like this
+ !#
+ !# a) select abs_ylp max = +5 ! global selector
+ !# reject abs_ylp min = +1.4442 max = +1.560 ! CMS barrel-endcap region
+ !#
+ !# b) select ylp min = -5 max = -1.560
+ !# select ylp min = -1.4442 max = +1.4442
+ !# select ylp min = +1.560 max = +5
+ !#
+ !# where the second one is clearly more tedious to specify
+ !#
+ !#####################################
+
+
+ !----- jet veto
+ select jets_pt min = 30
+ select jets_abs_y max = 3
+ select jets_abs_eta max = 10
+
+ !----- for Z production we have two leptons (l^[+-] = l[pm])
+ select abs_ylp max=5
+ select abs_ylm max=5
+
+ !----- V = {lp, lm}
+ select mll min = 80 max = 100
+
+ !----- for inclusive ptz
+ !select njets min = 0
+ !select ptz min = 20
+
+END_SELECTORS
+
+
+
+HISTOGRAMS
+
+ !####### SYNTAX ######################
+ !##
+ !## a) equal-sized bins:
+ !## {observable-name}[>{file-name}] nbins={val_nbins} min={val_min} max={val_max}
+ !##
+ !## b) non-uniform bins:
+ !## {observable-name}[>{file-name}] [bound0,bound1,bound2,...,boundN]
+ !##
+ !## *) conditional binning:
+ !## dress a histogram with additional selectors by specifying them inside a block:
+ !##
+ !## HISTOGRAM_SELECTORS
+ !## {SELECTOR}
+ !## .
+ !## .
+ !## .
+ !## END_HISTOGRAM_SELECTORS
+ !##
+ !## where {SELECTOR} follows the same syntax described above. A binning into
+ !## this histogram is then only performed when the event passes all selectors
+ !## specified in this block.
+ !##
+ !#####################################
+ !#
+ !# * comments begin with the character `!` and will be excluded from the parser
+ !#
+ !#####################################
+
+ !----- these are mostly the histograms produced also in the `default` branch
+ !----- parsing works in any order of the assignments `x = val`
+
+ ptj1 nbins = 19 min = 30d0 max = 600d0
+ etaj1 nbins = 20 min =-3d0 max = 3d0
+ yz nbins = 20 min =-3d0 max = 3d0
+
+END_HISTOGRAMS
+
+
+
+SCALES
+
+ !####### SYNTAX ######################
+ !##
+ !## muf={scale-specifier} mur={scale-specifier}
+ !##
+ !#####################################
+ !#
+ !# * {scale-specifier}
+ !#
+ !# a) fixed scale: [{fac}*] {value}
+ !#
+ !# b) dynamic scale: [{fac}*] {observable-name}
+ !#
+ !# * the observable for dynamic scales must be [GeV] (this is not checked)
+ !#
+ !#####################################
+
+ !----- ZJ paper setup
+ !> fixed scales
+ muf = 91.1876 mur = 91.1876
+ ! muf = 2.0 * 91.1876 mur = 2.0 * 91.1876
+ ! muf = 0.5 * 91.1876 mur = 0.5 * 91.1876
+
+ !> dynamical scales
+ ! muf = mll mur = 2.0 * mll
+ ! muf = 2.0 * mll mur = mll
+
+ !> mix it up?
+ ! muf = 0.5 * mll mur = 1.0 * 91.1876
+ ! muf = 5 mur = 2.0 * ptj1
+
+END_SCALES
+
+
+
+!####### SYNTAX ######################
+!##
+!## REWEIGHT {observable-name}**{val_power}
+!##
+!#####################################
+
+! REWEIGHT ht_part**4
+
+
+
+!####### SYNTAX ######################
+!##
+!## PHOTON_ISOLATION {algorithm} {algorithm-options}
+!##
+!#####################################
+!#
+!# * Frixione:
+!#
+!# PHOTON_ISOLATION frix delta={var} epsilon={var} n={var}
+!#
+!# * cut on sum(ET) inside a cone around the photon:
+!#
+!# PHOTON_ISOLATION etsum delta={var} etmax={var}
+!#
+!#####################################
+
+!PHOTON_ISOLATION frix delta = 0.5 epsilon = 0.1 n = 1
+!PHOTON_ISOLATION etsum delta = 0.5 etmax = 10
+
+
+
+CHANNELS
+
+ !####### SYNTAX ######################
+ !##
+ !## list of process id's (see selectchannelXYZ.f)
+ !##
+ !#####################################
+ !#
+ !# * any number of whitespace-separated process id's in one line allowed
+ !#
+ !# * self-explaning wild-cards:
+ !# - ALL
+ !# - LO, NLO, NNLO
+ !# - V, R
+ !# - VV, RV, RR
+ !#
+ !#####################################
+
+ RV ! process
+
+ ! 1 ! one B channel
+ ! 13 ! one R channel
+ ! 73 ! one V channel
+ ! 163 ! one RR channel
+ ! 317 ! one RV channel
+ ! 617 ! one VV channel
+
+ ! 17 18 31 32 ! qg-initiated R contributions
+
+END_CHANNELS
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ZJ/Testrun/ZJ.NLO-R-warmup.run
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ZJ/Testrun/ZJ.NLO-R-warmup.run (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ZJ/Testrun/ZJ.NLO-R-warmup.run (revision 1772)
@@ -0,0 +1,251 @@
+NNLOJET_RUNCARD
+NLO-R ! Job name id, must be less than 10 characters
+ZJ ! Process name
+@EVENTS@ ! Number of events
+8 ! Number of iterations
+1 ! Seed number
+.true. ! Warmup
+.false. ! Production
+NNPDF30_nnlo_as_0118 ! PDF set
+antikt ! Jet algorithm, accepts 'kt', 'cam' or 'antikt'
+0.5d0 ! Rcut
+.false. ! exclusive
+1 ! Heavy particle decay type
+1d-7 ! Technical cutoff y0
+.true. ! angular averaging of the phase space, default to true
+2 ! Virtual Integration method, use 2 if you're not sure
+all ! RR a/b region flag. Accepts 'a','b' or 'all'.
+0 ! set to zero for MC, 2 for point test
+.false. ! print max weight flag
+.true. ! momentum mapping and PDF storage flag
+.true. ! colour sampling flag
+.false. ! explicit pole check flag, stops integration when set to true
+
+PHYSICAL_PARAMETERS
+8000d0 ! roots
+125d0 ! Mass of the Higgs Boson
+0.004029643852d0 ! Width of the Higgs Boson
+91.1876d0 ! Mass of the Z Boson
+2.4952d0 ! Width of the Z Boson
+80.398d0 ! Mass of the W Boson
+2.1054d0 ! Width of the W Boson
+173.2d0 ! Mass of the Top Quark
+1.41d0 ! Width of the Top Quark
+4.18d0 ! Mass of the Bottom Quark
+0d0 ! Width of the Bottom Quark
+1.275d0 ! Mass of the Charm Quark
+0d0 ! Width of the Charm Quark
+1000d0 ! Mass of the KK graviton
+0d0 ! Width of the KK graviton
+
+! UNIT_PHASE
+
+SELECTORS
+
+ !####### SYNTAX ######################
+ !##
+ !## [select|accept|reject] {observable-name} [min={val_min}] [max={val_max}]
+ !##
+ !#####################################
+ !#
+ !# * comments begin with the character `!` and will be excluded from the parser
+ !# just like this documentation block. This way, one can maintain various setups
+ !# in one runcard and comment in/out parts as needed.
+ !#
+ !# * multiple selectors are combined with a logical "and"
+ !#
+ !# * only necessary to specify at least one of the two: min, max
+ !#
+ !# * if both are set, the order of the min/max specification is irrelevant
+ !#
+ !# * each line here generates a new Selector and it is therefore better to reduce
+ !# the number of lines if possible. For instance the following cases are
+ !# all equivalent and the one-liners should be preferred:
+ !#
+ !# a) select ylp min = -5 ! --> accept [-5, +infty]
+ !# select ylp max = +5 ! --> accept [-infty, +5]
+ !# ! combined: [-5, +5]
+ !#
+ !# b) reject ylp max = -5 ! --> reject [+5, +infty]
+ !# reject ylp min = +5 ! --> reject [-infty, -5]
+ !# ! combined: [-5, +5]
+ !#
+ !# c) select ylp min = -5 max = +5 ! --> accept [-5, +5]
+ !#
+ !# d) select abs_ylp max = +5 ! --> accept |y| < 5 => [-5, +5]
+ !#
+ !# e) reject abs_ylp min = +5 ! --> reject |y| > 5 => [-5, +5]
+ !#
+ !# * the `reject` option actually has a very nice use-case in the exclusion
+ !# of the barrel--endcap region like this
+ !#
+ !# a) select abs_ylp max = +5 ! global selector
+ !# reject abs_ylp min = +1.4442 max = +1.560 ! CMS barrel-endcap region
+ !#
+ !# b) select ylp min = -5 max = -1.560
+ !# select ylp min = -1.4442 max = +1.4442
+ !# select ylp min = +1.560 max = +5
+ !#
+ !# where the second one is clearly more tedious to specify
+ !#
+ !#####################################
+
+
+ !----- jet veto
+ select jets_pt min = 30
+ select jets_abs_y max = 3
+ select jets_abs_eta max = 10
+
+ !----- for Z production we have two leptons (l^[+-] = l[pm])
+ select abs_ylp max=5
+ select abs_ylm max=5
+
+ !----- V = {lp, lm}
+ select mll min = 80 max = 100
+
+ !----- for inclusive ptz
+ !select njets min = 0
+ !select ptz min = 20
+
+END_SELECTORS
+
+
+
+HISTOGRAMS
+
+ !####### SYNTAX ######################
+ !##
+ !## a) equal-sized bins:
+ !## {observable-name}[>{file-name}] nbins={val_nbins} min={val_min} max={val_max}
+ !##
+ !## b) non-uniform bins:
+ !## {observable-name}[>{file-name}] [bound0,bound1,bound2,...,boundN]
+ !##
+ !## *) conditional binning:
+ !## dress a histogram with additional selectors by specifying them inside a block:
+ !##
+ !## HISTOGRAM_SELECTORS
+ !## {SELECTOR}
+ !## .
+ !## .
+ !## .
+ !## END_HISTOGRAM_SELECTORS
+ !##
+ !## where {SELECTOR} follows the same syntax described above. A binning into
+ !## this histogram is then only performed when the event passes all selectors
+ !## specified in this block.
+ !##
+ !#####################################
+ !#
+ !# * comments begin with the character `!` and will be excluded from the parser
+ !#
+ !#####################################
+
+ !----- these are mostly the histograms produced also in the `default` branch
+ !----- parsing works in any order of the assignments `x = val`
+
+ ptj1 nbins = 19 min = 30d0 max = 600d0
+ etaj1 nbins = 20 min =-3d0 max = 3d0
+ yz nbins = 20 min =-3d0 max = 3d0
+
+END_HISTOGRAMS
+
+
+
+SCALES
+
+ !####### SYNTAX ######################
+ !##
+ !## muf={scale-specifier} mur={scale-specifier}
+ !##
+ !#####################################
+ !#
+ !# * {scale-specifier}
+ !#
+ !# a) fixed scale: [{fac}*] {value}
+ !#
+ !# b) dynamic scale: [{fac}*] {observable-name}
+ !#
+ !# * the observable for dynamic scales must be [GeV] (this is not checked)
+ !#
+ !#####################################
+
+ !----- ZJ paper setup
+ !> fixed scales
+ muf = 91.1876 mur = 91.1876
+ ! muf = 2.0 * 91.1876 mur = 2.0 * 91.1876
+ ! muf = 0.5 * 91.1876 mur = 0.5 * 91.1876
+
+ !> dynamical scales
+ ! muf = mll mur = 2.0 * mll
+ ! muf = 2.0 * mll mur = mll
+
+ !> mix it up?
+ ! muf = 0.5 * mll mur = 1.0 * 91.1876
+ ! muf = 5 mur = 2.0 * ptj1
+
+END_SCALES
+
+
+
+!####### SYNTAX ######################
+!##
+!## REWEIGHT {observable-name}**{val_power}
+!##
+!#####################################
+
+! REWEIGHT ht_part**4
+
+
+
+!####### SYNTAX ######################
+!##
+!## PHOTON_ISOLATION {algorithm} {algorithm-options}
+!##
+!#####################################
+!#
+!# * Frixione:
+!#
+!# PHOTON_ISOLATION frix delta={var} epsilon={var} n={var}
+!#
+!# * cut on sum(ET) inside a cone around the photon:
+!#
+!# PHOTON_ISOLATION etsum delta={var} etmax={var}
+!#
+!#####################################
+
+!PHOTON_ISOLATION frix delta = 0.5 epsilon = 0.1 n = 1
+!PHOTON_ISOLATION etsum delta = 0.5 etmax = 10
+
+
+
+CHANNELS
+
+ !####### SYNTAX ######################
+ !##
+ !## list of process id's (see selectchannelXYZ.f)
+ !##
+ !#####################################
+ !#
+ !# * any number of whitespace-separated process id's in one line allowed
+ !#
+ !# * self-explaning wild-cards:
+ !# - ALL
+ !# - LO, NLO, NNLO
+ !# - V, R
+ !# - VV, RV, RR
+ !#
+ !#####################################
+
+ R ! process
+
+ ! 1 ! one B channel
+ ! 13 ! one R channel
+ ! 73 ! one V channel
+ ! 163 ! one RR channel
+ ! 317 ! one RV channel
+ ! 617 ! one VV channel
+
+ ! 17 18 31 32 ! qg-initiated R contributions
+
+END_CHANNELS
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ZJ/Testrun/ZJ.NNLO-VV-prod.run
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ZJ/Testrun/ZJ.NNLO-VV-prod.run (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ZJ/Testrun/ZJ.NNLO-VV-prod.run (revision 1772)
@@ -0,0 +1,251 @@
+NNLOJET_RUNCARD
+NNLO-VV ! Job name id, must be less than 10 characters
+ZJ ! Process name
+@EVENTS@ ! Number of events
+1 ! Number of iterations
+@SEED@ ! Seed number
+.false. ! Warmup
+.true. ! Production
+NNPDF30_nnlo_as_0118 ! PDF set
+antikt ! Jet algorithm, accepts 'kt', 'cam' or 'antikt'
+0.5d0 ! Rcut
+.false. ! exclusive
+1 ! Heavy particle decay type
+1d-7 ! Technical cutoff y0
+.true. ! angular averaging of the phase space, default to true
+2 ! Virtual Integration method, use 2 if you're not sure
+all ! RR a/b region flag. Accepts 'a','b' or 'all'.
+0 ! set to zero for MC, 2 for point test
+.false. ! print max weight flag
+.true. ! momentum mapping and PDF storage flag
+.true. ! colour sampling flag
+.false. ! explicit pole check flag, stops integration when set to true
+
+PHYSICAL_PARAMETERS
+8000d0 ! roots
+125d0 ! Mass of the Higgs Boson
+0.004029643852d0 ! Width of the Higgs Boson
+91.1876d0 ! Mass of the Z Boson
+2.4952d0 ! Width of the Z Boson
+80.398d0 ! Mass of the W Boson
+2.1054d0 ! Width of the W Boson
+173.2d0 ! Mass of the Top Quark
+1.41d0 ! Width of the Top Quark
+4.18d0 ! Mass of the Bottom Quark
+0d0 ! Width of the Bottom Quark
+1.275d0 ! Mass of the Charm Quark
+0d0 ! Width of the Charm Quark
+1000d0 ! Mass of the KK graviton
+0d0 ! Width of the KK graviton
+
+! UNIT_PHASE
+
+SELECTORS
+
+ !####### SYNTAX ######################
+ !##
+ !## [select|accept|reject] {observable-name} [min={val_min}] [max={val_max}]
+ !##
+ !#####################################
+ !#
+ !# * comments begin with the character `!` and will be excluded from the parser
+ !# just like this documentation block. This way, one can maintain various setups
+ !# in one runcard and comment in/out parts as needed.
+ !#
+ !# * multiple selectors are combined with a logical "and"
+ !#
+ !# * only necessary to specify at least one of the two: min, max
+ !#
+ !# * if both are set, the order of the min/max specification is irrelevant
+ !#
+ !# * each line here generates a new Selector and it is therefore better to reduce
+ !# the number of lines if possible. For instance the following cases are
+ !# all equivalent and the one-liners should be preferred:
+ !#
+ !# a) select ylp min = -5 ! --> accept [-5, +infty]
+ !# select ylp max = +5 ! --> accept [-infty, +5]
+ !# ! combined: [-5, +5]
+ !#
+ !# b) reject ylp max = -5 ! --> reject [+5, +infty]
+ !# reject ylp min = +5 ! --> reject [-infty, -5]
+ !# ! combined: [-5, +5]
+ !#
+ !# c) select ylp min = -5 max = +5 ! --> accept [-5, +5]
+ !#
+ !# d) select abs_ylp max = +5 ! --> accept |y| < 5 => [-5, +5]
+ !#
+ !# e) reject abs_ylp min = +5 ! --> reject |y| > 5 => [-5, +5]
+ !#
+ !# * the `reject` option actually has a very nice use-case in the exclusion
+ !# of the barrel--endcap region like this
+ !#
+ !# a) select abs_ylp max = +5 ! global selector
+ !# reject abs_ylp min = +1.4442 max = +1.560 ! CMS barrel-endcap region
+ !#
+ !# b) select ylp min = -5 max = -1.560
+ !# select ylp min = -1.4442 max = +1.4442
+ !# select ylp min = +1.560 max = +5
+ !#
+ !# where the second one is clearly more tedious to specify
+ !#
+ !#####################################
+
+
+ !----- jet veto
+ select jets_pt min = 30
+ select jets_abs_y max = 3
+ select jets_abs_eta max = 10
+
+ !----- for Z production we have two leptons (l^[+-] = l[pm])
+ select abs_ylp max=5
+ select abs_ylm max=5
+
+ !----- V = {lp, lm}
+ select mll min = 80 max = 100
+
+ !----- for inclusive ptz
+ !select njets min = 0
+ !select ptz min = 20
+
+END_SELECTORS
+
+
+
+HISTOGRAMS
+
+ !####### SYNTAX ######################
+ !##
+ !## a) equal-sized bins:
+ !## {observable-name}[>{file-name}] nbins={val_nbins} min={val_min} max={val_max}
+ !##
+ !## b) non-uniform bins:
+ !## {observable-name}[>{file-name}] [bound0,bound1,bound2,...,boundN]
+ !##
+ !## *) conditional binning:
+ !## dress a histogram with additional selectors by specifying them inside a block:
+ !##
+ !## HISTOGRAM_SELECTORS
+ !## {SELECTOR}
+ !## .
+ !## .
+ !## .
+ !## END_HISTOGRAM_SELECTORS
+ !##
+ !## where {SELECTOR} follows the same syntax described above. A binning into
+ !## this histogram is then only performed when the event passes all selectors
+ !## specified in this block.
+ !##
+ !#####################################
+ !#
+ !# * comments begin with the character `!` and will be excluded from the parser
+ !#
+ !#####################################
+
+ !----- these are mostly the histograms produced also in the `default` branch
+ !----- parsing works in any order of the assignments `x = val`
+
+ ptj1 nbins = 19 min = 30d0 max = 600d0
+ etaj1 nbins = 20 min =-3d0 max = 3d0
+ yz nbins = 20 min =-3d0 max = 3d0
+
+END_HISTOGRAMS
+
+
+
+SCALES
+
+ !####### SYNTAX ######################
+ !##
+ !## muf={scale-specifier} mur={scale-specifier}
+ !##
+ !#####################################
+ !#
+ !# * {scale-specifier}
+ !#
+ !# a) fixed scale: [{fac}*] {value}
+ !#
+ !# b) dynamic scale: [{fac}*] {observable-name}
+ !#
+ !# * the observable for dynamic scales must be [GeV] (this is not checked)
+ !#
+ !#####################################
+
+ !----- ZJ paper setup
+ !> fixed scales
+ muf = 91.1876 mur = 91.1876
+ ! muf = 2.0 * 91.1876 mur = 2.0 * 91.1876
+ ! muf = 0.5 * 91.1876 mur = 0.5 * 91.1876
+
+ !> dynamical scales
+ ! muf = mll mur = 2.0 * mll
+ ! muf = 2.0 * mll mur = mll
+
+ !> mix it up?
+ ! muf = 0.5 * mll mur = 1.0 * 91.1876
+ ! muf = 5 mur = 2.0 * ptj1
+
+END_SCALES
+
+
+
+!####### SYNTAX ######################
+!##
+!## REWEIGHT {observable-name}**{val_power}
+!##
+!#####################################
+
+! REWEIGHT ht_part**4
+
+
+
+!####### SYNTAX ######################
+!##
+!## PHOTON_ISOLATION {algorithm} {algorithm-options}
+!##
+!#####################################
+!#
+!# * Frixione:
+!#
+!# PHOTON_ISOLATION frix delta={var} epsilon={var} n={var}
+!#
+!# * cut on sum(ET) inside a cone around the photon:
+!#
+!# PHOTON_ISOLATION etsum delta={var} etmax={var}
+!#
+!#####################################
+
+!PHOTON_ISOLATION frix delta = 0.5 epsilon = 0.1 n = 1
+!PHOTON_ISOLATION etsum delta = 0.5 etmax = 10
+
+
+
+CHANNELS
+
+ !####### SYNTAX ######################
+ !##
+ !## list of process id's (see selectchannelXYZ.f)
+ !##
+ !#####################################
+ !#
+ !# * any number of whitespace-separated process id's in one line allowed
+ !#
+ !# * self-explaning wild-cards:
+ !# - ALL
+ !# - LO, NLO, NNLO
+ !# - V, R
+ !# - VV, RV, RR
+ !#
+ !#####################################
+
+ VV ! process
+
+ ! 1 ! one B channel
+ ! 13 ! one R channel
+ ! 73 ! one V channel
+ ! 163 ! one RR channel
+ ! 317 ! one RV channel
+ ! 617 ! one VV channel
+
+ ! 17 18 31 32 ! qg-initiated R contributions
+
+END_CHANNELS
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ZJ/Testrun/ZJ.NNLO-RRa-warmup.run
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ZJ/Testrun/ZJ.NNLO-RRa-warmup.run (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ZJ/Testrun/ZJ.NNLO-RRa-warmup.run (revision 1772)
@@ -0,0 +1,251 @@
+NNLOJET_RUNCARD
+NNLO-RRa ! Job name id, must be less than 10 characters
+ZJ ! Process name
+@EVENTS@ ! Number of events
+8 ! Number of iterations
+1 ! Seed number
+.true. ! Warmup
+.false. ! Production
+NNPDF30_nnlo_as_0118 ! PDF set
+antikt ! Jet algorithm, accepts 'kt', 'cam' or 'antikt'
+0.5d0 ! Rcut
+.false. ! exclusive
+1 ! Heavy particle decay type
+1d-7 ! Technical cutoff y0
+.true. ! angular averaging of the phase space, default to true
+2 ! Virtual Integration method, use 2 if you're not sure
+a ! RR a/b region flag. Accepts 'a','b' or 'all'.
+0 ! set to zero for MC, 2 for point test
+.false. ! print max weight flag
+.true. ! momentum mapping and PDF storage flag
+.true. ! colour sampling flag
+.false. ! explicit pole check flag, stops integration when set to true
+
+PHYSICAL_PARAMETERS
+8000d0 ! roots
+125d0 ! Mass of the Higgs Boson
+0.004029643852d0 ! Width of the Higgs Boson
+91.1876d0 ! Mass of the Z Boson
+2.4952d0 ! Width of the Z Boson
+80.398d0 ! Mass of the W Boson
+2.1054d0 ! Width of the W Boson
+173.2d0 ! Mass of the Top Quark
+1.41d0 ! Width of the Top Quark
+4.18d0 ! Mass of the Bottom Quark
+0d0 ! Width of the Bottom Quark
+1.275d0 ! Mass of the Charm Quark
+0d0 ! Width of the Charm Quark
+1000d0 ! Mass of the KK graviton
+0d0 ! Width of the KK graviton
+
+! UNIT_PHASE
+
+SELECTORS
+
+ !####### SYNTAX ######################
+ !##
+ !## [select|accept|reject] {observable-name} [min={val_min}] [max={val_max}]
+ !##
+ !#####################################
+ !#
+ !# * comments begin with the character `!` and will be excluded from the parser
+ !# just like this documentation block. This way, one can maintain various setups
+ !# in one runcard and comment in/out parts as needed.
+ !#
+ !# * multiple selectors are combined with a logical "and"
+ !#
+ !# * only necessary to specify at least one of the two: min, max
+ !#
+ !# * if both are set, the order of the min/max specification is irrelevant
+ !#
+ !# * each line here generates a new Selector and it is therefore better to reduce
+ !# the number of lines if possible. For instance the following cases are
+ !# all equivalent and the one-liners should be preferred:
+ !#
+ !# a) select ylp min = -5 ! --> accept [-5, +infty]
+ !# select ylp max = +5 ! --> accept [-infty, +5]
+ !# ! combined: [-5, +5]
+ !#
+ !# b) reject ylp max = -5 ! --> reject [+5, +infty]
+ !# reject ylp min = +5 ! --> reject [-infty, -5]
+ !# ! combined: [-5, +5]
+ !#
+ !# c) select ylp min = -5 max = +5 ! --> accept [-5, +5]
+ !#
+ !# d) select abs_ylp max = +5 ! --> accept |y| < 5 => [-5, +5]
+ !#
+ !# e) reject abs_ylp min = +5 ! --> reject |y| > 5 => [-5, +5]
+ !#
+ !# * the `reject` option actually has a very nice use-case in the exclusion
+ !# of the barrel--endcap region like this
+ !#
+ !# a) select abs_ylp max = +5 ! global selector
+ !# reject abs_ylp min = +1.4442 max = +1.560 ! CMS barrel-endcap region
+ !#
+ !# b) select ylp min = -5 max = -1.560
+ !# select ylp min = -1.4442 max = +1.4442
+ !# select ylp min = +1.560 max = +5
+ !#
+ !# where the second one is clearly more tedious to specify
+ !#
+ !#####################################
+
+
+ !----- jet veto
+ select jets_pt min = 30
+ select jets_abs_y max = 3
+ select jets_abs_eta max = 10
+
+ !----- for Z production we have two leptons (l^[+-] = l[pm])
+ select abs_ylp max=5
+ select abs_ylm max=5
+
+ !----- V = {lp, lm}
+ select mll min = 80 max = 100
+
+ !----- for inclusive ptz
+ !select njets min = 0
+ !select ptz min = 20
+
+END_SELECTORS
+
+
+
+HISTOGRAMS
+
+ !####### SYNTAX ######################
+ !##
+ !## a) equal-sized bins:
+ !## {observable-name}[>{file-name}] nbins={val_nbins} min={val_min} max={val_max}
+ !##
+ !## b) non-uniform bins:
+ !## {observable-name}[>{file-name}] [bound0,bound1,bound2,...,boundN]
+ !##
+ !## *) conditional binning:
+ !## dress a histogram with additional selectors by specifying them inside a block:
+ !##
+ !## HISTOGRAM_SELECTORS
+ !## {SELECTOR}
+ !## .
+ !## .
+ !## .
+ !## END_HISTOGRAM_SELECTORS
+ !##
+ !## where {SELECTOR} follows the same syntax described above. A binning into
+ !## this histogram is then only performed when the event passes all selectors
+ !## specified in this block.
+ !##
+ !#####################################
+ !#
+ !# * comments begin with the character `!` and will be excluded from the parser
+ !#
+ !#####################################
+
+ !----- these are mostly the histograms produced also in the `default` branch
+ !----- parsing works in any order of the assignments `x = val`
+
+ ptj1 nbins = 19 min = 30d0 max = 600d0
+ etaj1 nbins = 20 min =-3d0 max = 3d0
+ yz nbins = 20 min =-3d0 max = 3d0
+
+END_HISTOGRAMS
+
+
+
+SCALES
+
+ !####### SYNTAX ######################
+ !##
+ !## muf={scale-specifier} mur={scale-specifier}
+ !##
+ !#####################################
+ !#
+ !# * {scale-specifier}
+ !#
+ !# a) fixed scale: [{fac}*] {value}
+ !#
+ !# b) dynamic scale: [{fac}*] {observable-name}
+ !#
+ !# * the observable for dynamic scales must be [GeV] (this is not checked)
+ !#
+ !#####################################
+
+ !----- ZJ paper setup
+ !> fixed scales
+ muf = 91.1876 mur = 91.1876
+ ! muf = 2.0 * 91.1876 mur = 2.0 * 91.1876
+ ! muf = 0.5 * 91.1876 mur = 0.5 * 91.1876
+
+ !> dynamical scales
+ ! muf = mll mur = 2.0 * mll
+ ! muf = 2.0 * mll mur = mll
+
+ !> mix it up?
+ ! muf = 0.5 * mll mur = 1.0 * 91.1876
+ ! muf = 5 mur = 2.0 * ptj1
+
+END_SCALES
+
+
+
+!####### SYNTAX ######################
+!##
+!## REWEIGHT {observable-name}**{val_power}
+!##
+!#####################################
+
+! REWEIGHT ht_part**4
+
+
+
+!####### SYNTAX ######################
+!##
+!## PHOTON_ISOLATION {algorithm} {algorithm-options}
+!##
+!#####################################
+!#
+!# * Frixione:
+!#
+!# PHOTON_ISOLATION frix delta={var} epsilon={var} n={var}
+!#
+!# * cut on sum(ET) inside a cone around the photon:
+!#
+!# PHOTON_ISOLATION etsum delta={var} etmax={var}
+!#
+!#####################################
+
+!PHOTON_ISOLATION frix delta = 0.5 epsilon = 0.1 n = 1
+!PHOTON_ISOLATION etsum delta = 0.5 etmax = 10
+
+
+
+CHANNELS
+
+ !####### SYNTAX ######################
+ !##
+ !## list of process id's (see selectchannelXYZ.f)
+ !##
+ !#####################################
+ !#
+ !# * any number of whitespace-separated process id's in one line allowed
+ !#
+ !# * self-explaning wild-cards:
+ !# - ALL
+ !# - LO, NLO, NNLO
+ !# - V, R
+ !# - VV, RV, RR
+ !#
+ !#####################################
+
+ RR ! process
+
+ ! 1 ! one B channel
+ ! 13 ! one R channel
+ ! 73 ! one V channel
+ ! 163 ! one RR channel
+ ! 317 ! one RV channel
+ ! 617 ! one VV channel
+
+ ! 17 18 31 32 ! qg-initiated R contributions
+
+END_CHANNELS
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ZJ/Testrun/ZJ.LO-fastwarmup.run
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ZJ/Testrun/ZJ.LO-fastwarmup.run (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ZJ/Testrun/ZJ.LO-fastwarmup.run (revision 1772)
@@ -0,0 +1,251 @@
+NNLOJET_RUNCARD
+LO ! Job name id, must be less than 10 characters
+ZJ ! Process name
+@EVENTS@ ! Number of events
+1 ! Number of iterations
+@SEED@ ! Seed number
+.false. ! Warmup
+.true. ! Production
+NNPDF30_nnlo_as_0118 ! PDF set
+antikt ! Jet algorithm, accepts 'kt', 'cam' or 'antikt'
+0.5d0 ! Rcut
+.false. ! exclusive
+1 ! Heavy particle decay type
+1d-7 ! Technical cutoff y0
+.true. ! angular averaging of the phase space, default to true
+2 ! Virtual Integration method, use 2 if you're not sure
+all ! RR a/b region flag. Accepts 'a','b' or 'all'.
+0 ! set to zero for MC, 2 for point test
+.false. ! print max weight flag
+.true. ! momentum mapping and PDF storage flag
+.true. ! colour sampling flag
+.false. ! explicit pole check flag, stops integration when set to true
+
+PHYSICAL_PARAMETERS
+8000d0 ! roots
+125d0 ! Mass of the Higgs Boson
+0.004029643852d0 ! Width of the Higgs Boson
+91.1876d0 ! Mass of the Z Boson
+2.4952d0 ! Width of the Z Boson
+80.398d0 ! Mass of the W Boson
+2.1054d0 ! Width of the W Boson
+173.2d0 ! Mass of the Top Quark
+1.41d0 ! Width of the Top Quark
+4.18d0 ! Mass of the Bottom Quark
+0d0 ! Width of the Bottom Quark
+1.275d0 ! Mass of the Charm Quark
+0d0 ! Width of the Charm Quark
+1000d0 ! Mass of the KK graviton
+0d0 ! Width of the KK graviton
+
+UNIT_PHASE
+
+SELECTORS
+
+ !####### SYNTAX ######################
+ !##
+ !## [select|accept|reject] {observable-name} [min={val_min}] [max={val_max}]
+ !##
+ !#####################################
+ !#
+ !# * comments begin with the character `!` and will be excluded from the parser
+ !# just like this documentation block. This way, one can maintain various setups
+ !# in one runcard and comment in/out parts as needed.
+ !#
+ !# * multiple selectors are combined with a logical "and"
+ !#
+ !# * only necessary to specify at least one of the two: min, max
+ !#
+ !# * if both are set, the order of the min/max specification is irrelevant
+ !#
+ !# * each line here generates a new Selector and it is therefore better to reduce
+ !# the number of lines if possible. For instance the following cases are
+ !# all equivalent and the one-liners should be preferred:
+ !#
+ !# a) select ylp min = -5 ! --> accept [-5, +infty]
+ !# select ylp max = +5 ! --> accept [-infty, +5]
+ !# ! combined: [-5, +5]
+ !#
+ !# b) reject ylp max = -5 ! --> reject [+5, +infty]
+ !# reject ylp min = +5 ! --> reject [-infty, -5]
+ !# ! combined: [-5, +5]
+ !#
+ !# c) select ylp min = -5 max = +5 ! --> accept [-5, +5]
+ !#
+ !# d) select abs_ylp max = +5 ! --> accept |y| < 5 => [-5, +5]
+ !#
+ !# e) reject abs_ylp min = +5 ! --> reject |y| > 5 => [-5, +5]
+ !#
+ !# * the `reject` option actually has a very nice use-case in the exclusion
+ !# of the barrel--endcap region like this
+ !#
+ !# a) select abs_ylp max = +5 ! global selector
+ !# reject abs_ylp min = +1.4442 max = +1.560 ! CMS barrel-endcap region
+ !#
+ !# b) select ylp min = -5 max = -1.560
+ !# select ylp min = -1.4442 max = +1.4442
+ !# select ylp min = +1.560 max = +5
+ !#
+ !# where the second one is clearly more tedious to specify
+ !#
+ !#####################################
+
+
+ !----- jet veto
+ select jets_pt min = 30
+ select jets_abs_y max = 3
+ select jets_abs_eta max = 10
+
+ !----- for Z production we have two leptons (l^[+-] = l[pm])
+ select abs_ylp max=5
+ select abs_ylm max=5
+
+ !----- V = {lp, lm}
+ select mll min = 80 max = 100
+
+ !----- for inclusive ptz
+ !select njets min = 0
+ !select ptz min = 20
+
+END_SELECTORS
+
+
+
+HISTOGRAMS
+
+ !####### SYNTAX ######################
+ !##
+ !## a) equal-sized bins:
+ !## {observable-name}[>{file-name}] nbins={val_nbins} min={val_min} max={val_max}
+ !##
+ !## b) non-uniform bins:
+ !## {observable-name}[>{file-name}] [bound0,bound1,bound2,...,boundN]
+ !##
+ !## *) conditional binning:
+ !## dress a histogram with additional selectors by specifying them inside a block:
+ !##
+ !## HISTOGRAM_SELECTORS
+ !## {SELECTOR}
+ !## .
+ !## .
+ !## .
+ !## END_HISTOGRAM_SELECTORS
+ !##
+ !## where {SELECTOR} follows the same syntax described above. A binning into
+ !## this histogram is then only performed when the event passes all selectors
+ !## specified in this block.
+ !##
+ !#####################################
+ !#
+ !# * comments begin with the character `!` and will be excluded from the parser
+ !#
+ !#####################################
+
+ !----- these are mostly the histograms produced also in the `default` branch
+ !----- parsing works in any order of the assignments `x = val`
+
+ ptj1 nbins = 19 min = 30d0 max = 600d0 grid=ZJ-ptj1.fast
+ etaj1 nbins = 20 min =-3d0 max = 3d0 grid=ZJ-etaj1.fast
+ yz nbins = 20 min =-3d0 max = 3d0 grid=ZJ-yz.fast
+
+END_HISTOGRAMS
+
+
+
+SCALES
+
+ !####### SYNTAX ######################
+ !##
+ !## muf={scale-specifier} mur={scale-specifier}
+ !##
+ !#####################################
+ !#
+ !# * {scale-specifier}
+ !#
+ !# a) fixed scale: [{fac}*] {value}
+ !#
+ !# b) dynamic scale: [{fac}*] {observable-name}
+ !#
+ !# * the observable for dynamic scales must be [GeV] (this is not checked)
+ !#
+ !#####################################
+
+ !----- ZJ paper setup
+ !> fixed scales
+ muf = 91.1876 mur = 91.1876
+ ! muf = 2.0 * 91.1876 mur = 2.0 * 91.1876
+ ! muf = 0.5 * 91.1876 mur = 0.5 * 91.1876
+
+ !> dynamical scales
+ ! muf = mll mur = 2.0 * mll
+ ! muf = 2.0 * mll mur = mll
+
+ !> mix it up?
+ ! muf = 0.5 * mll mur = 1.0 * 91.1876
+ ! muf = 5 mur = 2.0 * ptj1
+
+END_SCALES
+
+
+
+!####### SYNTAX ######################
+!##
+!## REWEIGHT {observable-name}**{val_power}
+!##
+!#####################################
+
+! REWEIGHT ht_part**4
+
+
+
+!####### SYNTAX ######################
+!##
+!## PHOTON_ISOLATION {algorithm} {algorithm-options}
+!##
+!#####################################
+!#
+!# * Frixione:
+!#
+!# PHOTON_ISOLATION frix delta={var} epsilon={var} n={var}
+!#
+!# * cut on sum(ET) inside a cone around the photon:
+!#
+!# PHOTON_ISOLATION etsum delta={var} etmax={var}
+!#
+!#####################################
+
+!PHOTON_ISOLATION frix delta = 0.5 epsilon = 0.1 n = 1
+!PHOTON_ISOLATION etsum delta = 0.5 etmax = 10
+
+
+
+CHANNELS
+
+ !####### SYNTAX ######################
+ !##
+ !## list of process id's (see selectchannelXYZ.f)
+ !##
+ !#####################################
+ !#
+ !# * any number of whitespace-separated process id's in one line allowed
+ !#
+ !# * self-explaning wild-cards:
+ !# - ALL
+ !# - LO, NLO, NNLO
+ !# - V, R
+ !# - VV, RV, RR
+ !#
+ !#####################################
+
+ LO ! process
+
+ ! 1 ! one B channel
+ ! 13 ! one R channel
+ ! 73 ! one V channel
+ ! 163 ! one RR channel
+ ! 317 ! one RV channel
+ ! 617 ! one VV channel
+
+ ! 17 18 31 32 ! qg-initiated R contributions
+
+END_CHANNELS
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ZJ/Testrun/ZJ.NNLO-RRb-warmup.run
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ZJ/Testrun/ZJ.NNLO-RRb-warmup.run (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ZJ/Testrun/ZJ.NNLO-RRb-warmup.run (revision 1772)
@@ -0,0 +1,251 @@
+NNLOJET_RUNCARD
+NNLO-RRb ! Job name id, must be less than 10 characters
+ZJ ! Process name
+@EVENTS@ ! Number of events
+8 ! Number of iterations
+1 ! Seed number
+.true. ! Warmup
+.false. ! Production
+NNPDF30_nnlo_as_0118 ! PDF set
+antikt ! Jet algorithm, accepts 'kt', 'cam' or 'antikt'
+0.5d0 ! Rcut
+.false. ! exclusive
+1 ! Heavy particle decay type
+1d-7 ! Technical cutoff y0
+.true. ! angular averaging of the phase space, default to true
+2 ! Virtual Integration method, use 2 if you're not sure
+b ! RR a/b region flag. Accepts 'a','b' or 'all'.
+0 ! set to zero for MC, 2 for point test
+.false. ! print max weight flag
+.true. ! momentum mapping and PDF storage flag
+.true. ! colour sampling flag
+.false. ! explicit pole check flag, stops integration when set to true
+
+PHYSICAL_PARAMETERS
+8000d0 ! roots
+125d0 ! Mass of the Higgs Boson
+0.004029643852d0 ! Width of the Higgs Boson
+91.1876d0 ! Mass of the Z Boson
+2.4952d0 ! Width of the Z Boson
+80.398d0 ! Mass of the W Boson
+2.1054d0 ! Width of the W Boson
+173.2d0 ! Mass of the Top Quark
+1.41d0 ! Width of the Top Quark
+4.18d0 ! Mass of the Bottom Quark
+0d0 ! Width of the Bottom Quark
+1.275d0 ! Mass of the Charm Quark
+0d0 ! Width of the Charm Quark
+1000d0 ! Mass of the KK graviton
+0d0 ! Width of the KK graviton
+
+! UNIT_PHASE
+
+SELECTORS
+
+ !####### SYNTAX ######################
+ !##
+ !## [select|accept|reject] {observable-name} [min={val_min}] [max={val_max}]
+ !##
+ !#####################################
+ !#
+ !# * comments begin with the character `!` and will be excluded from the parser
+ !# just like this documentation block. This way, one can maintain various setups
+ !# in one runcard and comment in/out parts as needed.
+ !#
+ !# * multiple selectors are combined with a logical "and"
+ !#
+ !# * only necessary to specify at least one of the two: min, max
+ !#
+ !# * if both are set, the order of the min/max specification is irrelevant
+ !#
+ !# * each line here generates a new Selector and it is therefore better to reduce
+ !# the number of lines if possible. For instance the following cases are
+ !# all equivalent and the one-liners should be preferred:
+ !#
+ !# a) select ylp min = -5 ! --> accept [-5, +infty]
+ !# select ylp max = +5 ! --> accept [-infty, +5]
+ !# ! combined: [-5, +5]
+ !#
+ !# b) reject ylp max = -5 ! --> reject [+5, +infty]
+ !# reject ylp min = +5 ! --> reject [-infty, -5]
+ !# ! combined: [-5, +5]
+ !#
+ !# c) select ylp min = -5 max = +5 ! --> accept [-5, +5]
+ !#
+ !# d) select abs_ylp max = +5 ! --> accept |y| < 5 => [-5, +5]
+ !#
+ !# e) reject abs_ylp min = +5 ! --> reject |y| > 5 => [-5, +5]
+ !#
+ !# * the `reject` option actually has a very nice use-case in the exclusion
+ !# of the barrel--endcap region like this
+ !#
+ !# a) select abs_ylp max = +5 ! global selector
+ !# reject abs_ylp min = +1.4442 max = +1.560 ! CMS barrel-endcap region
+ !#
+ !# b) select ylp min = -5 max = -1.560
+ !# select ylp min = -1.4442 max = +1.4442
+ !# select ylp min = +1.560 max = +5
+ !#
+ !# where the second one is clearly more tedious to specify
+ !#
+ !#####################################
+
+
+ !----- jet veto
+ select jets_pt min = 30
+ select jets_abs_y max = 3
+ select jets_abs_eta max = 10
+
+ !----- for Z production we have two leptons (l^[+-] = l[pm])
+ select abs_ylp max=5
+ select abs_ylm max=5
+
+ !----- V = {lp, lm}
+ select mll min = 80 max = 100
+
+ !----- for inclusive ptz
+ !select njets min = 0
+ !select ptz min = 20
+
+END_SELECTORS
+
+
+
+HISTOGRAMS
+
+ !####### SYNTAX ######################
+ !##
+ !## a) equal-sized bins:
+ !## {observable-name}[>{file-name}] nbins={val_nbins} min={val_min} max={val_max}
+ !##
+ !## b) non-uniform bins:
+ !## {observable-name}[>{file-name}] [bound0,bound1,bound2,...,boundN]
+ !##
+ !## *) conditional binning:
+ !## dress a histogram with additional selectors by specifying them inside a block:
+ !##
+ !## HISTOGRAM_SELECTORS
+ !## {SELECTOR}
+ !## .
+ !## .
+ !## .
+ !## END_HISTOGRAM_SELECTORS
+ !##
+ !## where {SELECTOR} follows the same syntax described above. A binning into
+ !## this histogram is then only performed when the event passes all selectors
+ !## specified in this block.
+ !##
+ !#####################################
+ !#
+ !# * comments begin with the character `!` and will be excluded from the parser
+ !#
+ !#####################################
+
+ !----- these are mostly the histograms produced also in the `default` branch
+ !----- parsing works in any order of the assignments `x = val`
+
+ ptj1 nbins = 19 min = 30d0 max = 600d0
+ etaj1 nbins = 20 min =-3d0 max = 3d0
+ yz nbins = 20 min =-3d0 max = 3d0
+
+END_HISTOGRAMS
+
+
+
+SCALES
+
+ !####### SYNTAX ######################
+ !##
+ !## muf={scale-specifier} mur={scale-specifier}
+ !##
+ !#####################################
+ !#
+ !# * {scale-specifier}
+ !#
+ !# a) fixed scale: [{fac}*] {value}
+ !#
+ !# b) dynamic scale: [{fac}*] {observable-name}
+ !#
+ !# * the observable for dynamic scales must be [GeV] (this is not checked)
+ !#
+ !#####################################
+
+ !----- ZJ paper setup
+ !> fixed scales
+ muf = 91.1876 mur = 91.1876
+ ! muf = 2.0 * 91.1876 mur = 2.0 * 91.1876
+ ! muf = 0.5 * 91.1876 mur = 0.5 * 91.1876
+
+ !> dynamical scales
+ ! muf = mll mur = 2.0 * mll
+ ! muf = 2.0 * mll mur = mll
+
+ !> mix it up?
+ ! muf = 0.5 * mll mur = 1.0 * 91.1876
+ ! muf = 5 mur = 2.0 * ptj1
+
+END_SCALES
+
+
+
+!####### SYNTAX ######################
+!##
+!## REWEIGHT {observable-name}**{val_power}
+!##
+!#####################################
+
+! REWEIGHT ht_part**4
+
+
+
+!####### SYNTAX ######################
+!##
+!## PHOTON_ISOLATION {algorithm} {algorithm-options}
+!##
+!#####################################
+!#
+!# * Frixione:
+!#
+!# PHOTON_ISOLATION frix delta={var} epsilon={var} n={var}
+!#
+!# * cut on sum(ET) inside a cone around the photon:
+!#
+!# PHOTON_ISOLATION etsum delta={var} etmax={var}
+!#
+!#####################################
+
+!PHOTON_ISOLATION frix delta = 0.5 epsilon = 0.1 n = 1
+!PHOTON_ISOLATION etsum delta = 0.5 etmax = 10
+
+
+
+CHANNELS
+
+ !####### SYNTAX ######################
+ !##
+ !## list of process id's (see selectchannelXYZ.f)
+ !##
+ !#####################################
+ !#
+ !# * any number of whitespace-separated process id's in one line allowed
+ !#
+ !# * self-explaning wild-cards:
+ !# - ALL
+ !# - LO, NLO, NNLO
+ !# - V, R
+ !# - VV, RV, RR
+ !#
+ !#####################################
+
+ RR ! process
+
+ ! 1 ! one B channel
+ ! 13 ! one R channel
+ ! 73 ! one V channel
+ ! 163 ! one RR channel
+ ! 317 ! one RV channel
+ ! 617 ! one VV channel
+
+ ! 17 18 31 32 ! qg-initiated R contributions
+
+END_CHANNELS
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ZJ/Testrun/ZJ.NNLO-RV-warmup.run
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ZJ/Testrun/ZJ.NNLO-RV-warmup.run (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ZJ/Testrun/ZJ.NNLO-RV-warmup.run (revision 1772)
@@ -0,0 +1,251 @@
+NNLOJET_RUNCARD
+NNLO-RV ! Job name id, must be less than 10 characters
+ZJ ! Process name
+@EVENTS@ ! Number of events
+8 ! Number of iterations
+1 ! Seed number
+.true. ! Warmup
+.false. ! Production
+NNPDF30_nnlo_as_0118 ! PDF set
+antikt ! Jet algorithm, accepts 'kt', 'cam' or 'antikt'
+0.5d0 ! Rcut
+.false. ! exclusive
+1 ! Heavy particle decay type
+1d-7 ! Technical cutoff y0
+.true. ! angular averaging of the phase space, default to true
+2 ! Virtual Integration method, use 2 if you're not sure
+all ! RR a/b region flag. Accepts 'a','b' or 'all'.
+0 ! set to zero for MC, 2 for point test
+.false. ! print max weight flag
+.true. ! momentum mapping and PDF storage flag
+.true. ! colour sampling flag
+.false. ! explicit pole check flag, stops integration when set to true
+
+PHYSICAL_PARAMETERS
+8000d0 ! roots
+125d0 ! Mass of the Higgs Boson
+0.004029643852d0 ! Width of the Higgs Boson
+91.1876d0 ! Mass of the Z Boson
+2.4952d0 ! Width of the Z Boson
+80.398d0 ! Mass of the W Boson
+2.1054d0 ! Width of the W Boson
+173.2d0 ! Mass of the Top Quark
+1.41d0 ! Width of the Top Quark
+4.18d0 ! Mass of the Bottom Quark
+0d0 ! Width of the Bottom Quark
+1.275d0 ! Mass of the Charm Quark
+0d0 ! Width of the Charm Quark
+1000d0 ! Mass of the KK graviton
+0d0 ! Width of the KK graviton
+
+! UNIT_PHASE
+
+SELECTORS
+
+ !####### SYNTAX ######################
+ !##
+ !## [select|accept|reject] {observable-name} [min={val_min}] [max={val_max}]
+ !##
+ !#####################################
+ !#
+ !# * comments begin with the character `!` and will be excluded from the parser
+ !# just like this documentation block. This way, one can maintain various setups
+ !# in one runcard and comment in/out parts as needed.
+ !#
+ !# * multiple selectors are combined with a logical "and"
+ !#
+ !# * only necessary to specify at least one of the two: min, max
+ !#
+ !# * if both are set, the order of the min/max specification is irrelevant
+ !#
+ !# * each line here generates a new Selector and it is therefore better to reduce
+ !# the number of lines if possible. For instance the following cases are
+ !# all equivalent and the one-liners should be preferred:
+ !#
+ !# a) select ylp min = -5 ! --> accept [-5, +infty]
+ !# select ylp max = +5 ! --> accept [-infty, +5]
+ !# ! combined: [-5, +5]
+ !#
+ !# b) reject ylp max = -5 ! --> reject [+5, +infty]
+ !# reject ylp min = +5 ! --> reject [-infty, -5]
+ !# ! combined: [-5, +5]
+ !#
+ !# c) select ylp min = -5 max = +5 ! --> accept [-5, +5]
+ !#
+ !# d) select abs_ylp max = +5 ! --> accept |y| < 5 => [-5, +5]
+ !#
+ !# e) reject abs_ylp min = +5 ! --> reject |y| > 5 => [-5, +5]
+ !#
+ !# * the `reject` option actually has a very nice use-case in the exclusion
+ !# of the barrel--endcap region like this
+ !#
+ !# a) select abs_ylp max = +5 ! global selector
+ !# reject abs_ylp min = +1.4442 max = +1.560 ! CMS barrel-endcap region
+ !#
+ !# b) select ylp min = -5 max = -1.560
+ !# select ylp min = -1.4442 max = +1.4442
+ !# select ylp min = +1.560 max = +5
+ !#
+ !# where the second one is clearly more tedious to specify
+ !#
+ !#####################################
+
+
+ !----- jet veto
+ select jets_pt min = 30
+ select jets_abs_y max = 3
+ select jets_abs_eta max = 10
+
+ !----- for Z production we have two leptons (l^[+-] = l[pm])
+ select abs_ylp max=5
+ select abs_ylm max=5
+
+ !----- V = {lp, lm}
+ select mll min = 80 max = 100
+
+ !----- for inclusive ptz
+ !select njets min = 0
+ !select ptz min = 20
+
+END_SELECTORS
+
+
+
+HISTOGRAMS
+
+ !####### SYNTAX ######################
+ !##
+ !## a) equal-sized bins:
+ !## {observable-name}[>{file-name}] nbins={val_nbins} min={val_min} max={val_max}
+ !##
+ !## b) non-uniform bins:
+ !## {observable-name}[>{file-name}] [bound0,bound1,bound2,...,boundN]
+ !##
+ !## *) conditional binning:
+ !## dress a histogram with additional selectors by specifying them inside a block:
+ !##
+ !## HISTOGRAM_SELECTORS
+ !## {SELECTOR}
+ !## .
+ !## .
+ !## .
+ !## END_HISTOGRAM_SELECTORS
+ !##
+ !## where {SELECTOR} follows the same syntax described above. A binning into
+ !## this histogram is then only performed when the event passes all selectors
+ !## specified in this block.
+ !##
+ !#####################################
+ !#
+ !# * comments begin with the character `!` and will be excluded from the parser
+ !#
+ !#####################################
+
+ !----- these are mostly the histograms produced also in the `default` branch
+ !----- parsing works in any order of the assignments `x = val`
+
+ ptj1 nbins = 19 min = 30d0 max = 600d0
+ etaj1 nbins = 20 min =-3d0 max = 3d0
+ yz nbins = 20 min =-3d0 max = 3d0
+
+END_HISTOGRAMS
+
+
+
+SCALES
+
+ !####### SYNTAX ######################
+ !##
+ !## muf={scale-specifier} mur={scale-specifier}
+ !##
+ !#####################################
+ !#
+ !# * {scale-specifier}
+ !#
+ !# a) fixed scale: [{fac}*] {value}
+ !#
+ !# b) dynamic scale: [{fac}*] {observable-name}
+ !#
+ !# * the observable for dynamic scales must be [GeV] (this is not checked)
+ !#
+ !#####################################
+
+ !----- ZJ paper setup
+ !> fixed scales
+ muf = 91.1876 mur = 91.1876
+ ! muf = 2.0 * 91.1876 mur = 2.0 * 91.1876
+ ! muf = 0.5 * 91.1876 mur = 0.5 * 91.1876
+
+ !> dynamical scales
+ ! muf = mll mur = 2.0 * mll
+ ! muf = 2.0 * mll mur = mll
+
+ !> mix it up?
+ ! muf = 0.5 * mll mur = 1.0 * 91.1876
+ ! muf = 5 mur = 2.0 * ptj1
+
+END_SCALES
+
+
+
+!####### SYNTAX ######################
+!##
+!## REWEIGHT {observable-name}**{val_power}
+!##
+!#####################################
+
+! REWEIGHT ht_part**4
+
+
+
+!####### SYNTAX ######################
+!##
+!## PHOTON_ISOLATION {algorithm} {algorithm-options}
+!##
+!#####################################
+!#
+!# * Frixione:
+!#
+!# PHOTON_ISOLATION frix delta={var} epsilon={var} n={var}
+!#
+!# * cut on sum(ET) inside a cone around the photon:
+!#
+!# PHOTON_ISOLATION etsum delta={var} etmax={var}
+!#
+!#####################################
+
+!PHOTON_ISOLATION frix delta = 0.5 epsilon = 0.1 n = 1
+!PHOTON_ISOLATION etsum delta = 0.5 etmax = 10
+
+
+
+CHANNELS
+
+ !####### SYNTAX ######################
+ !##
+ !## list of process id's (see selectchannelXYZ.f)
+ !##
+ !#####################################
+ !#
+ !# * any number of whitespace-separated process id's in one line allowed
+ !#
+ !# * self-explaning wild-cards:
+ !# - ALL
+ !# - LO, NLO, NNLO
+ !# - V, R
+ !# - VV, RV, RR
+ !#
+ !#####################################
+
+ RV ! process
+
+ ! 1 ! one B channel
+ ! 13 ! one R channel
+ ! 73 ! one V channel
+ ! 163 ! one RR channel
+ ! 317 ! one RV channel
+ ! 617 ! one VV channel
+
+ ! 17 18 31 32 ! qg-initiated R contributions
+
+END_CHANNELS
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ZJ/Testrun/ZJ.NLO-V-warmup.run
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ZJ/Testrun/ZJ.NLO-V-warmup.run (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ZJ/Testrun/ZJ.NLO-V-warmup.run (revision 1772)
@@ -0,0 +1,251 @@
+NNLOJET_RUNCARD
+NLO-V ! Job name id, must be less than 10 characters
+ZJ ! Process name
+@EVENTS@ ! Number of events
+8 ! Number of iterations
+1 ! Seed number
+.true. ! Warmup
+.false. ! Production
+NNPDF30_nnlo_as_0118 ! PDF set
+antikt ! Jet algorithm, accepts 'kt', 'cam' or 'antikt'
+0.5d0 ! Rcut
+.false. ! exclusive
+1 ! Heavy particle decay type
+1d-7 ! Technical cutoff y0
+.true. ! angular averaging of the phase space, default to true
+2 ! Virtual Integration method, use 2 if you're not sure
+all ! RR a/b region flag. Accepts 'a','b' or 'all'.
+0 ! set to zero for MC, 2 for point test
+.false. ! print max weight flag
+.true. ! momentum mapping and PDF storage flag
+.true. ! colour sampling flag
+.false. ! explicit pole check flag, stops integration when set to true
+
+PHYSICAL_PARAMETERS
+8000d0 ! roots
+125d0 ! Mass of the Higgs Boson
+0.004029643852d0 ! Width of the Higgs Boson
+91.1876d0 ! Mass of the Z Boson
+2.4952d0 ! Width of the Z Boson
+80.398d0 ! Mass of the W Boson
+2.1054d0 ! Width of the W Boson
+173.2d0 ! Mass of the Top Quark
+1.41d0 ! Width of the Top Quark
+4.18d0 ! Mass of the Bottom Quark
+0d0 ! Width of the Bottom Quark
+1.275d0 ! Mass of the Charm Quark
+0d0 ! Width of the Charm Quark
+1000d0 ! Mass of the KK graviton
+0d0 ! Width of the KK graviton
+
+! UNIT_PHASE
+
+SELECTORS
+
+ !####### SYNTAX ######################
+ !##
+ !## [select|accept|reject] {observable-name} [min={val_min}] [max={val_max}]
+ !##
+ !#####################################
+ !#
+ !# * comments begin with the character `!` and will be excluded from the parser
+ !# just like this documentation block. This way, one can maintain various setups
+ !# in one runcard and comment in/out parts as needed.
+ !#
+ !# * multiple selectors are combined with a logical "and"
+ !#
+ !# * only necessary to specify at least one of the two: min, max
+ !#
+ !# * if both are set, the order of the min/max specification is irrelevant
+ !#
+ !# * each line here generates a new Selector and it is therefore better to reduce
+ !# the number of lines if possible. For instance the following cases are
+ !# all equivalent and the one-liners should be preferred:
+ !#
+ !# a) select ylp min = -5 ! --> accept [-5, +infty]
+ !# select ylp max = +5 ! --> accept [-infty, +5]
+ !# ! combined: [-5, +5]
+ !#
+ !# b) reject ylp max = -5 ! --> reject [+5, +infty]
+ !# reject ylp min = +5 ! --> reject [-infty, -5]
+ !# ! combined: [-5, +5]
+ !#
+ !# c) select ylp min = -5 max = +5 ! --> accept [-5, +5]
+ !#
+ !# d) select abs_ylp max = +5 ! --> accept |y| < 5 => [-5, +5]
+ !#
+ !# e) reject abs_ylp min = +5 ! --> reject |y| > 5 => [-5, +5]
+ !#
+ !# * the `reject` option actually has a very nice use-case in the exclusion
+ !# of the barrel--endcap region like this
+ !#
+ !# a) select abs_ylp max = +5 ! global selector
+ !# reject abs_ylp min = +1.4442 max = +1.560 ! CMS barrel-endcap region
+ !#
+ !# b) select ylp min = -5 max = -1.560
+ !# select ylp min = -1.4442 max = +1.4442
+ !# select ylp min = +1.560 max = +5
+ !#
+ !# where the second one is clearly more tedious to specify
+ !#
+ !#####################################
+
+
+ !----- jet veto
+ select jets_pt min = 30
+ select jets_abs_y max = 3
+ select jets_abs_eta max = 10
+
+ !----- for Z production we have two leptons (l^[+-] = l[pm])
+ select abs_ylp max=5
+ select abs_ylm max=5
+
+ !----- V = {lp, lm}
+ select mll min = 80 max = 100
+
+ !----- for inclusive ptz
+ !select njets min = 0
+ !select ptz min = 20
+
+END_SELECTORS
+
+
+
+HISTOGRAMS
+
+ !####### SYNTAX ######################
+ !##
+ !## a) equal-sized bins:
+ !## {observable-name}[>{file-name}] nbins={val_nbins} min={val_min} max={val_max}
+ !##
+ !## b) non-uniform bins:
+ !## {observable-name}[>{file-name}] [bound0,bound1,bound2,...,boundN]
+ !##
+ !## *) conditional binning:
+ !## dress a histogram with additional selectors by specifying them inside a block:
+ !##
+ !## HISTOGRAM_SELECTORS
+ !## {SELECTOR}
+ !## .
+ !## .
+ !## .
+ !## END_HISTOGRAM_SELECTORS
+ !##
+ !## where {SELECTOR} follows the same syntax described above. A binning into
+ !## this histogram is then only performed when the event passes all selectors
+ !## specified in this block.
+ !##
+ !#####################################
+ !#
+ !# * comments begin with the character `!` and will be excluded from the parser
+ !#
+ !#####################################
+
+ !----- these are mostly the histograms produced also in the `default` branch
+ !----- parsing works in any order of the assignments `x = val`
+
+ ptj1 nbins = 19 min = 30d0 max = 600d0
+ etaj1 nbins = 20 min =-3d0 max = 3d0
+ yz nbins = 20 min =-3d0 max = 3d0
+
+END_HISTOGRAMS
+
+
+
+SCALES
+
+ !####### SYNTAX ######################
+ !##
+ !## muf={scale-specifier} mur={scale-specifier}
+ !##
+ !#####################################
+ !#
+ !# * {scale-specifier}
+ !#
+ !# a) fixed scale: [{fac}*] {value}
+ !#
+ !# b) dynamic scale: [{fac}*] {observable-name}
+ !#
+ !# * the observable for dynamic scales must be [GeV] (this is not checked)
+ !#
+ !#####################################
+
+ !----- ZJ paper setup
+ !> fixed scales
+ muf = 91.1876 mur = 91.1876
+ ! muf = 2.0 * 91.1876 mur = 2.0 * 91.1876
+ ! muf = 0.5 * 91.1876 mur = 0.5 * 91.1876
+
+ !> dynamical scales
+ ! muf = mll mur = 2.0 * mll
+ ! muf = 2.0 * mll mur = mll
+
+ !> mix it up?
+ ! muf = 0.5 * mll mur = 1.0 * 91.1876
+ ! muf = 5 mur = 2.0 * ptj1
+
+END_SCALES
+
+
+
+!####### SYNTAX ######################
+!##
+!## REWEIGHT {observable-name}**{val_power}
+!##
+!#####################################
+
+! REWEIGHT ht_part**4
+
+
+
+!####### SYNTAX ######################
+!##
+!## PHOTON_ISOLATION {algorithm} {algorithm-options}
+!##
+!#####################################
+!#
+!# * Frixione:
+!#
+!# PHOTON_ISOLATION frix delta={var} epsilon={var} n={var}
+!#
+!# * cut on sum(ET) inside a cone around the photon:
+!#
+!# PHOTON_ISOLATION etsum delta={var} etmax={var}
+!#
+!#####################################
+
+!PHOTON_ISOLATION frix delta = 0.5 epsilon = 0.1 n = 1
+!PHOTON_ISOLATION etsum delta = 0.5 etmax = 10
+
+
+
+CHANNELS
+
+ !####### SYNTAX ######################
+ !##
+ !## list of process id's (see selectchannelXYZ.f)
+ !##
+ !#####################################
+ !#
+ !# * any number of whitespace-separated process id's in one line allowed
+ !#
+ !# * self-explaning wild-cards:
+ !# - ALL
+ !# - LO, NLO, NNLO
+ !# - V, R
+ !# - VV, RV, RR
+ !#
+ !#####################################
+
+ V ! process
+
+ ! 1 ! one B channel
+ ! 13 ! one R channel
+ ! 73 ! one V channel
+ ! 163 ! one RR channel
+ ! 317 ! one RV channel
+ ! 617 ! one VV channel
+
+ ! 17 18 31 32 ! qg-initiated R contributions
+
+END_CHANNELS
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ZJ/Testrun/ZJ.NLO-R-fastprod.run
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ZJ/Testrun/ZJ.NLO-R-fastprod.run (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ZJ/Testrun/ZJ.NLO-R-fastprod.run (revision 1772)
@@ -0,0 +1,251 @@
+NNLOJET_RUNCARD
+NLO-R ! Job name id, must be less than 10 characters
+ZJ ! Process name
+@EVENTS@ ! Number of events
+1 ! Number of iterations
+@SEED@ ! Seed number
+.false. ! Warmup
+.true. ! Production
+NNPDF30_nnlo_as_0118 ! PDF set
+antikt ! Jet algorithm, accepts 'kt', 'cam' or 'antikt'
+0.5d0 ! Rcut
+.false. ! exclusive
+1 ! Heavy particle decay type
+1d-7 ! Technical cutoff y0
+.true. ! angular averaging of the phase space, default to true
+2 ! Virtual Integration method, use 2 if you're not sure
+all ! RR a/b region flag. Accepts 'a','b' or 'all'.
+0 ! set to zero for MC, 2 for point test
+.false. ! print max weight flag
+.true. ! momentum mapping and PDF storage flag
+.true. ! colour sampling flag
+.false. ! explicit pole check flag, stops integration when set to true
+
+PHYSICAL_PARAMETERS
+8000d0 ! roots
+125d0 ! Mass of the Higgs Boson
+0.004029643852d0 ! Width of the Higgs Boson
+91.1876d0 ! Mass of the Z Boson
+2.4952d0 ! Width of the Z Boson
+80.398d0 ! Mass of the W Boson
+2.1054d0 ! Width of the W Boson
+173.2d0 ! Mass of the Top Quark
+1.41d0 ! Width of the Top Quark
+4.18d0 ! Mass of the Bottom Quark
+0d0 ! Width of the Bottom Quark
+1.275d0 ! Mass of the Charm Quark
+0d0 ! Width of the Charm Quark
+1000d0 ! Mass of the KK graviton
+0d0 ! Width of the KK graviton
+
+! UNIT_PHASE
+
+SELECTORS
+
+ !####### SYNTAX ######################
+ !##
+ !## [select|accept|reject] {observable-name} [min={val_min}] [max={val_max}]
+ !##
+ !#####################################
+ !#
+ !# * comments begin with the character `!` and will be excluded from the parser
+ !# just like this documentation block. This way, one can maintain various setups
+ !# in one runcard and comment in/out parts as needed.
+ !#
+ !# * multiple selectors are combined with a logical "and"
+ !#
+ !# * only necessary to specify at least one of the two: min, max
+ !#
+ !# * if both are set, the order of the min/max specification is irrelevant
+ !#
+ !# * each line here generates a new Selector and it is therefore better to reduce
+ !# the number of lines if possible. For instance the following cases are
+ !# all equivalent and the one-liners should be preferred:
+ !#
+ !# a) select ylp min = -5 ! --> accept [-5, +infty]
+ !# select ylp max = +5 ! --> accept [-infty, +5]
+ !# ! combined: [-5, +5]
+ !#
+ !# b) reject ylp max = -5 ! --> reject [+5, +infty]
+ !# reject ylp min = +5 ! --> reject [-infty, -5]
+ !# ! combined: [-5, +5]
+ !#
+ !# c) select ylp min = -5 max = +5 ! --> accept [-5, +5]
+ !#
+ !# d) select abs_ylp max = +5 ! --> accept |y| < 5 => [-5, +5]
+ !#
+ !# e) reject abs_ylp min = +5 ! --> reject |y| > 5 => [-5, +5]
+ !#
+ !# * the `reject` option actually has a very nice use-case in the exclusion
+ !# of the barrel--endcap region like this
+ !#
+ !# a) select abs_ylp max = +5 ! global selector
+ !# reject abs_ylp min = +1.4442 max = +1.560 ! CMS barrel-endcap region
+ !#
+ !# b) select ylp min = -5 max = -1.560
+ !# select ylp min = -1.4442 max = +1.4442
+ !# select ylp min = +1.560 max = +5
+ !#
+ !# where the second one is clearly more tedious to specify
+ !#
+ !#####################################
+
+
+ !----- jet veto
+ select jets_pt min = 30
+ select jets_abs_y max = 3
+ select jets_abs_eta max = 10
+
+ !----- for Z production we have two leptons (l^[+-] = l[pm])
+ select abs_ylp max=5
+ select abs_ylm max=5
+
+ !----- V = {lp, lm}
+ select mll min = 80 max = 100
+
+ !----- for inclusive ptz
+ !select njets min = 0
+ !select ptz min = 20
+
+END_SELECTORS
+
+
+
+HISTOGRAMS
+
+ !####### SYNTAX ######################
+ !##
+ !## a) equal-sized bins:
+ !## {observable-name}[>{file-name}] nbins={val_nbins} min={val_min} max={val_max}
+ !##
+ !## b) non-uniform bins:
+ !## {observable-name}[>{file-name}] [bound0,bound1,bound2,...,boundN]
+ !##
+ !## *) conditional binning:
+ !## dress a histogram with additional selectors by specifying them inside a block:
+ !##
+ !## HISTOGRAM_SELECTORS
+ !## {SELECTOR}
+ !## .
+ !## .
+ !## .
+ !## END_HISTOGRAM_SELECTORS
+ !##
+ !## where {SELECTOR} follows the same syntax described above. A binning into
+ !## this histogram is then only performed when the event passes all selectors
+ !## specified in this block.
+ !##
+ !#####################################
+ !#
+ !# * comments begin with the character `!` and will be excluded from the parser
+ !#
+ !#####################################
+
+ !----- these are mostly the histograms produced also in the `default` branch
+ !----- parsing works in any order of the assignments `x = val`
+
+ ptj1 nbins = 19 min = 30d0 max = 600d0 grid=ZJ-ptj1.fast
+ etaj1 nbins = 20 min =-3d0 max = 3d0 grid=ZJ-etaj1.fast
+ yz nbins = 20 min =-3d0 max = 3d0 grid=ZJ-yz.fast
+
+END_HISTOGRAMS
+
+
+
+SCALES
+
+ !####### SYNTAX ######################
+ !##
+ !## muf={scale-specifier} mur={scale-specifier}
+ !##
+ !#####################################
+ !#
+ !# * {scale-specifier}
+ !#
+ !# a) fixed scale: [{fac}*] {value}
+ !#
+ !# b) dynamic scale: [{fac}*] {observable-name}
+ !#
+ !# * the observable for dynamic scales must be [GeV] (this is not checked)
+ !#
+ !#####################################
+
+ !----- ZJ paper setup
+ !> fixed scales
+ muf = 91.1876 mur = 91.1876
+ ! muf = 2.0 * 91.1876 mur = 2.0 * 91.1876
+ ! muf = 0.5 * 91.1876 mur = 0.5 * 91.1876
+
+ !> dynamical scales
+ ! muf = mll mur = 2.0 * mll
+ ! muf = 2.0 * mll mur = mll
+
+ !> mix it up?
+ ! muf = 0.5 * mll mur = 1.0 * 91.1876
+ ! muf = 5 mur = 2.0 * ptj1
+
+END_SCALES
+
+
+
+!####### SYNTAX ######################
+!##
+!## REWEIGHT {observable-name}**{val_power}
+!##
+!#####################################
+
+! REWEIGHT ht_part**4
+
+
+
+!####### SYNTAX ######################
+!##
+!## PHOTON_ISOLATION {algorithm} {algorithm-options}
+!##
+!#####################################
+!#
+!# * Frixione:
+!#
+!# PHOTON_ISOLATION frix delta={var} epsilon={var} n={var}
+!#
+!# * cut on sum(ET) inside a cone around the photon:
+!#
+!# PHOTON_ISOLATION etsum delta={var} etmax={var}
+!#
+!#####################################
+
+!PHOTON_ISOLATION frix delta = 0.5 epsilon = 0.1 n = 1
+!PHOTON_ISOLATION etsum delta = 0.5 etmax = 10
+
+
+
+CHANNELS
+
+ !####### SYNTAX ######################
+ !##
+ !## list of process id's (see selectchannelXYZ.f)
+ !##
+ !#####################################
+ !#
+ !# * any number of whitespace-separated process id's in one line allowed
+ !#
+ !# * self-explaning wild-cards:
+ !# - ALL
+ !# - LO, NLO, NNLO
+ !# - V, R
+ !# - VV, RV, RR
+ !#
+ !#####################################
+
+ R ! process
+
+ ! 1 ! one B channel
+ ! 13 ! one R channel
+ ! 73 ! one V channel
+ ! 163 ! one RR channel
+ ! 317 ! one RV channel
+ ! 617 ! one VV channel
+
+ ! 17 18 31 32 ! qg-initiated R contributions
+
+END_CHANNELS
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ZJ/Testrun/ZJ.NNLO-VV-warmup.run
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ZJ/Testrun/ZJ.NNLO-VV-warmup.run (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ZJ/Testrun/ZJ.NNLO-VV-warmup.run (revision 1772)
@@ -0,0 +1,251 @@
+NNLOJET_RUNCARD
+NNLO-VV ! Job name id, must be less than 10 characters
+ZJ ! Process name
+@EVENTS@ ! Number of events
+8 ! Number of iterations
+1 ! Seed number
+.true. ! Warmup
+.false. ! Production
+NNPDF30_nnlo_as_0118 ! PDF set
+antikt ! Jet algorithm, accepts 'kt', 'cam' or 'antikt'
+0.5d0 ! Rcut
+.false. ! exclusive
+1 ! Heavy particle decay type
+1d-7 ! Technical cutoff y0
+.true. ! angular averaging of the phase space, default to true
+2 ! Virtual Integration method, use 2 if you're not sure
+all ! RR a/b region flag. Accepts 'a','b' or 'all'.
+0 ! set to zero for MC, 2 for point test
+.false. ! print max weight flag
+.true. ! momentum mapping and PDF storage flag
+.true. ! colour sampling flag
+.false. ! explicit pole check flag, stops integration when set to true
+
+PHYSICAL_PARAMETERS
+8000d0 ! roots
+125d0 ! Mass of the Higgs Boson
+0.004029643852d0 ! Width of the Higgs Boson
+91.1876d0 ! Mass of the Z Boson
+2.4952d0 ! Width of the Z Boson
+80.398d0 ! Mass of the W Boson
+2.1054d0 ! Width of the W Boson
+173.2d0 ! Mass of the Top Quark
+1.41d0 ! Width of the Top Quark
+4.18d0 ! Mass of the Bottom Quark
+0d0 ! Width of the Bottom Quark
+1.275d0 ! Mass of the Charm Quark
+0d0 ! Width of the Charm Quark
+1000d0 ! Mass of the KK graviton
+0d0 ! Width of the KK graviton
+
+! UNIT_PHASE
+
+SELECTORS
+
+ !####### SYNTAX ######################
+ !##
+ !## [select|accept|reject] {observable-name} [min={val_min}] [max={val_max}]
+ !##
+ !#####################################
+ !#
+ !# * comments begin with the character `!` and will be excluded from the parser
+ !# just like this documentation block. This way, one can maintain various setups
+ !# in one runcard and comment in/out parts as needed.
+ !#
+ !# * multiple selectors are combined with a logical "and"
+ !#
+ !# * only necessary to specify at least one of the two: min, max
+ !#
+ !# * if both are set, the order of the min/max specification is irrelevant
+ !#
+ !# * each line here generates a new Selector and it is therefore better to reduce
+ !# the number of lines if possible. For instance the following cases are
+ !# all equivalent and the one-liners should be preferred:
+ !#
+ !# a) select ylp min = -5 ! --> accept [-5, +infty]
+ !# select ylp max = +5 ! --> accept [-infty, +5]
+ !# ! combined: [-5, +5]
+ !#
+ !# b) reject ylp max = -5 ! --> reject [+5, +infty]
+ !# reject ylp min = +5 ! --> reject [-infty, -5]
+ !# ! combined: [-5, +5]
+ !#
+ !# c) select ylp min = -5 max = +5 ! --> accept [-5, +5]
+ !#
+ !# d) select abs_ylp max = +5 ! --> accept |y| < 5 => [-5, +5]
+ !#
+ !# e) reject abs_ylp min = +5 ! --> reject |y| > 5 => [-5, +5]
+ !#
+ !# * the `reject` option actually has a very nice use-case in the exclusion
+ !# of the barrel--endcap region like this
+ !#
+ !# a) select abs_ylp max = +5 ! global selector
+ !# reject abs_ylp min = +1.4442 max = +1.560 ! CMS barrel-endcap region
+ !#
+ !# b) select ylp min = -5 max = -1.560
+ !# select ylp min = -1.4442 max = +1.4442
+ !# select ylp min = +1.560 max = +5
+ !#
+ !# where the second one is clearly more tedious to specify
+ !#
+ !#####################################
+
+
+ !----- jet veto
+ select jets_pt min = 30
+ select jets_abs_y max = 3
+ select jets_abs_eta max = 10
+
+ !----- for Z production we have two leptons (l^[+-] = l[pm])
+ select abs_ylp max=5
+ select abs_ylm max=5
+
+ !----- V = {lp, lm}
+ select mll min = 80 max = 100
+
+ !----- for inclusive ptz
+ !select njets min = 0
+ !select ptz min = 20
+
+END_SELECTORS
+
+
+
+HISTOGRAMS
+
+ !####### SYNTAX ######################
+ !##
+ !## a) equal-sized bins:
+ !## {observable-name}[>{file-name}] nbins={val_nbins} min={val_min} max={val_max}
+ !##
+ !## b) non-uniform bins:
+ !## {observable-name}[>{file-name}] [bound0,bound1,bound2,...,boundN]
+ !##
+ !## *) conditional binning:
+ !## dress a histogram with additional selectors by specifying them inside a block:
+ !##
+ !## HISTOGRAM_SELECTORS
+ !## {SELECTOR}
+ !## .
+ !## .
+ !## .
+ !## END_HISTOGRAM_SELECTORS
+ !##
+ !## where {SELECTOR} follows the same syntax described above. A binning into
+ !## this histogram is then only performed when the event passes all selectors
+ !## specified in this block.
+ !##
+ !#####################################
+ !#
+ !# * comments begin with the character `!` and will be excluded from the parser
+ !#
+ !#####################################
+
+ !----- these are mostly the histograms produced also in the `default` branch
+ !----- parsing works in any order of the assignments `x = val`
+
+ ptj1 nbins = 19 min = 30d0 max = 600d0
+ etaj1 nbins = 20 min =-3d0 max = 3d0
+ yz nbins = 20 min =-3d0 max = 3d0
+
+END_HISTOGRAMS
+
+
+
+SCALES
+
+ !####### SYNTAX ######################
+ !##
+ !## muf={scale-specifier} mur={scale-specifier}
+ !##
+ !#####################################
+ !#
+ !# * {scale-specifier}
+ !#
+ !# a) fixed scale: [{fac}*] {value}
+ !#
+ !# b) dynamic scale: [{fac}*] {observable-name}
+ !#
+ !# * the observable for dynamic scales must be [GeV] (this is not checked)
+ !#
+ !#####################################
+
+ !----- ZJ paper setup
+ !> fixed scales
+ muf = 91.1876 mur = 91.1876
+ ! muf = 2.0 * 91.1876 mur = 2.0 * 91.1876
+ ! muf = 0.5 * 91.1876 mur = 0.5 * 91.1876
+
+ !> dynamical scales
+ ! muf = mll mur = 2.0 * mll
+ ! muf = 2.0 * mll mur = mll
+
+ !> mix it up?
+ ! muf = 0.5 * mll mur = 1.0 * 91.1876
+ ! muf = 5 mur = 2.0 * ptj1
+
+END_SCALES
+
+
+
+!####### SYNTAX ######################
+!##
+!## REWEIGHT {observable-name}**{val_power}
+!##
+!#####################################
+
+! REWEIGHT ht_part**4
+
+
+
+!####### SYNTAX ######################
+!##
+!## PHOTON_ISOLATION {algorithm} {algorithm-options}
+!##
+!#####################################
+!#
+!# * Frixione:
+!#
+!# PHOTON_ISOLATION frix delta={var} epsilon={var} n={var}
+!#
+!# * cut on sum(ET) inside a cone around the photon:
+!#
+!# PHOTON_ISOLATION etsum delta={var} etmax={var}
+!#
+!#####################################
+
+!PHOTON_ISOLATION frix delta = 0.5 epsilon = 0.1 n = 1
+!PHOTON_ISOLATION etsum delta = 0.5 etmax = 10
+
+
+
+CHANNELS
+
+ !####### SYNTAX ######################
+ !##
+ !## list of process id's (see selectchannelXYZ.f)
+ !##
+ !#####################################
+ !#
+ !# * any number of whitespace-separated process id's in one line allowed
+ !#
+ !# * self-explaning wild-cards:
+ !# - ALL
+ !# - LO, NLO, NNLO
+ !# - V, R
+ !# - VV, RV, RR
+ !#
+ !#####################################
+
+ VV ! process
+
+ ! 1 ! one B channel
+ ! 13 ! one R channel
+ ! 73 ! one V channel
+ ! 163 ! one RR channel
+ ! 317 ! one RV channel
+ ! 617 ! one VV channel
+
+ ! 17 18 31 32 ! qg-initiated R contributions
+
+END_CHANNELS
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ZJ/Testrun/README
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ZJ/Testrun/README (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ZJ/Testrun/README (revision 1772)
@@ -0,0 +1,35 @@
+In the ZJ test run setup I used separate run cards for
+- each process, LO, NLO-R, ... and for
+- each workflow step NNLOJET warmup, APPLfast warmup, APPLfast production,
+ (NNLOJET production without grid for checks)
+
+Using on-the-fly variable substitution like possible with our grid submission
+tool grid-control, this can be reduced to essentially one run card in total
+and one configuration file defining the substitutions per workflow step
+for the submission tool. This does not require any changes in NNLOJET, nnlo-bridge
+or APPLfast.
+
+In the run cards here you will find that I used variable substitution only
+in two places:
+
+@EVENTS@ ! Number of events
+@SEED@ ! Seed number
+
+where the @...@ variables indicate the substitutions to be made.
+This can easily be generalised to adapt also the following lines
+that must be changed for the different steps and processes, and
+to select no grid, APPLgrid, fastNLO, or both for the defined histograms:
+
+.false. ! Warmup
+.true. ! Production
+all ! RR a/b region flag. Accepts 'a','b' or 'all'.
+
+! UNIT_PHASE
+
+ ptj1 nbins = 19 min = 30d0 max = 600d0 grid=ZJ-ptj1.fast
+ etaj1 nbins = 20 min =-3d0 max = 3d0 grid=ZJ-etaj1.fast
+ yz nbins = 20 min =-3d0 max = 3d0 grid=ZJ-yz.fast
+
+ LO ! process
+
+I will probably update in that sense for a pp jet production test.
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ZJ/Testrun/ZJ.NNLO-RRa-fastprod.run
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ZJ/Testrun/ZJ.NNLO-RRa-fastprod.run (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ZJ/Testrun/ZJ.NNLO-RRa-fastprod.run (revision 1772)
@@ -0,0 +1,251 @@
+NNLOJET_RUNCARD
+NNLO-RRa ! Job name id, must be less than 10 characters
+ZJ ! Process name
+@EVENTS@ ! Number of events
+1 ! Number of iterations
+@SEED@ ! Seed number
+.false. ! Warmup
+.true. ! Production
+NNPDF30_nnlo_as_0118 ! PDF set
+antikt ! Jet algorithm, accepts 'kt', 'cam' or 'antikt'
+0.5d0 ! Rcut
+.false. ! exclusive
+1 ! Heavy particle decay type
+1d-7 ! Technical cutoff y0
+.true. ! angular averaging of the phase space, default to true
+2 ! Virtual Integration method, use 2 if you're not sure
+a ! RR a/b region flag. Accepts 'a','b' or 'all'.
+0 ! set to zero for MC, 2 for point test
+.false. ! print max weight flag
+.true. ! momentum mapping and PDF storage flag
+.true. ! colour sampling flag
+.false. ! explicit pole check flag, stops integration when set to true
+
+PHYSICAL_PARAMETERS
+8000d0 ! roots
+125d0 ! Mass of the Higgs Boson
+0.004029643852d0 ! Width of the Higgs Boson
+91.1876d0 ! Mass of the Z Boson
+2.4952d0 ! Width of the Z Boson
+80.398d0 ! Mass of the W Boson
+2.1054d0 ! Width of the W Boson
+173.2d0 ! Mass of the Top Quark
+1.41d0 ! Width of the Top Quark
+4.18d0 ! Mass of the Bottom Quark
+0d0 ! Width of the Bottom Quark
+1.275d0 ! Mass of the Charm Quark
+0d0 ! Width of the Charm Quark
+1000d0 ! Mass of the KK graviton
+0d0 ! Width of the KK graviton
+
+! UNIT_PHASE
+
+SELECTORS
+
+ !####### SYNTAX ######################
+ !##
+ !## [select|accept|reject] {observable-name} [min={val_min}] [max={val_max}]
+ !##
+ !#####################################
+ !#
+ !# * comments begin with the character `!` and will be excluded from the parser
+ !# just like this documentation block. This way, one can maintain various setups
+ !# in one runcard and comment in/out parts as needed.
+ !#
+ !# * multiple selectors are combined with a logical "and"
+ !#
+ !# * only necessary to specify at least one of the two: min, max
+ !#
+ !# * if both are set, the order of the min/max specification is irrelevant
+ !#
+ !# * each line here generates a new Selector and it is therefore better to reduce
+ !# the number of lines if possible. For instance the following cases are
+ !# all equivalent and the one-liners should be preferred:
+ !#
+ !# a) select ylp min = -5 ! --> accept [-5, +infty]
+ !# select ylp max = +5 ! --> accept [-infty, +5]
+ !# ! combined: [-5, +5]
+ !#
+ !# b) reject ylp max = -5 ! --> reject [+5, +infty]
+ !# reject ylp min = +5 ! --> reject [-infty, -5]
+ !# ! combined: [-5, +5]
+ !#
+ !# c) select ylp min = -5 max = +5 ! --> accept [-5, +5]
+ !#
+ !# d) select abs_ylp max = +5 ! --> accept |y| < 5 => [-5, +5]
+ !#
+ !# e) reject abs_ylp min = +5 ! --> reject |y| > 5 => [-5, +5]
+ !#
+ !# * the `reject` option actually has a very nice use-case in the exclusion
+ !# of the barrel--endcap region like this
+ !#
+ !# a) select abs_ylp max = +5 ! global selector
+ !# reject abs_ylp min = +1.4442 max = +1.560 ! CMS barrel-endcap region
+ !#
+ !# b) select ylp min = -5 max = -1.560
+ !# select ylp min = -1.4442 max = +1.4442
+ !# select ylp min = +1.560 max = +5
+ !#
+ !# where the second one is clearly more tedious to specify
+ !#
+ !#####################################
+
+
+ !----- jet veto
+ select jets_pt min = 30
+ select jets_abs_y max = 3
+ select jets_abs_eta max = 10
+
+ !----- for Z production we have two leptons (l^[+-] = l[pm])
+ select abs_ylp max=5
+ select abs_ylm max=5
+
+ !----- V = {lp, lm}
+ select mll min = 80 max = 100
+
+ !----- for inclusive ptz
+ !select njets min = 0
+ !select ptz min = 20
+
+END_SELECTORS
+
+
+
+HISTOGRAMS
+
+ !####### SYNTAX ######################
+ !##
+ !## a) equal-sized bins:
+ !## {observable-name}[>{file-name}] nbins={val_nbins} min={val_min} max={val_max}
+ !##
+ !## b) non-uniform bins:
+ !## {observable-name}[>{file-name}] [bound0,bound1,bound2,...,boundN]
+ !##
+ !## *) conditional binning:
+ !## dress a histogram with additional selectors by specifying them inside a block:
+ !##
+ !## HISTOGRAM_SELECTORS
+ !## {SELECTOR}
+ !## .
+ !## .
+ !## .
+ !## END_HISTOGRAM_SELECTORS
+ !##
+ !## where {SELECTOR} follows the same syntax described above. A binning into
+ !## this histogram is then only performed when the event passes all selectors
+ !## specified in this block.
+ !##
+ !#####################################
+ !#
+ !# * comments begin with the character `!` and will be excluded from the parser
+ !#
+ !#####################################
+
+ !----- these are mostly the histograms produced also in the `default` branch
+ !----- parsing works in any order of the assignments `x = val`
+
+ ptj1 nbins = 19 min = 30d0 max = 600d0 grid=ZJ-ptj1.fast
+ etaj1 nbins = 20 min =-3d0 max = 3d0 grid=ZJ-etaj1.fast
+ yz nbins = 20 min =-3d0 max = 3d0 grid=ZJ-yz.fast
+
+END_HISTOGRAMS
+
+
+
+SCALES
+
+ !####### SYNTAX ######################
+ !##
+ !## muf={scale-specifier} mur={scale-specifier}
+ !##
+ !#####################################
+ !#
+ !# * {scale-specifier}
+ !#
+ !# a) fixed scale: [{fac}*] {value}
+ !#
+ !# b) dynamic scale: [{fac}*] {observable-name}
+ !#
+ !# * the observable for dynamic scales must be [GeV] (this is not checked)
+ !#
+ !#####################################
+
+ !----- ZJ paper setup
+ !> fixed scales
+ muf = 91.1876 mur = 91.1876
+ ! muf = 2.0 * 91.1876 mur = 2.0 * 91.1876
+ ! muf = 0.5 * 91.1876 mur = 0.5 * 91.1876
+
+ !> dynamical scales
+ ! muf = mll mur = 2.0 * mll
+ ! muf = 2.0 * mll mur = mll
+
+ !> mix it up?
+ ! muf = 0.5 * mll mur = 1.0 * 91.1876
+ ! muf = 5 mur = 2.0 * ptj1
+
+END_SCALES
+
+
+
+!####### SYNTAX ######################
+!##
+!## REWEIGHT {observable-name}**{val_power}
+!##
+!#####################################
+
+! REWEIGHT ht_part**4
+
+
+
+!####### SYNTAX ######################
+!##
+!## PHOTON_ISOLATION {algorithm} {algorithm-options}
+!##
+!#####################################
+!#
+!# * Frixione:
+!#
+!# PHOTON_ISOLATION frix delta={var} epsilon={var} n={var}
+!#
+!# * cut on sum(ET) inside a cone around the photon:
+!#
+!# PHOTON_ISOLATION etsum delta={var} etmax={var}
+!#
+!#####################################
+
+!PHOTON_ISOLATION frix delta = 0.5 epsilon = 0.1 n = 1
+!PHOTON_ISOLATION etsum delta = 0.5 etmax = 10
+
+
+
+CHANNELS
+
+ !####### SYNTAX ######################
+ !##
+ !## list of process id's (see selectchannelXYZ.f)
+ !##
+ !#####################################
+ !#
+ !# * any number of whitespace-separated process id's in one line allowed
+ !#
+ !# * self-explaning wild-cards:
+ !# - ALL
+ !# - LO, NLO, NNLO
+ !# - V, R
+ !# - VV, RV, RR
+ !#
+ !#####################################
+
+ RR ! process
+
+ ! 1 ! one B channel
+ ! 13 ! one R channel
+ ! 73 ! one V channel
+ ! 163 ! one RR channel
+ ! 317 ! one RV channel
+ ! 617 ! one VV channel
+
+ ! 17 18 31 32 ! qg-initiated R contributions
+
+END_CHANNELS
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ZJ/Testrun/ZJ.NNLO-RRb-fastprod.run
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ZJ/Testrun/ZJ.NNLO-RRb-fastprod.run (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ZJ/Testrun/ZJ.NNLO-RRb-fastprod.run (revision 1772)
@@ -0,0 +1,251 @@
+NNLOJET_RUNCARD
+NNLO-RRb ! Job name id, must be less than 10 characters
+ZJ ! Process name
+@EVENTS@ ! Number of events
+1 ! Number of iterations
+@SEED@ ! Seed number
+.false. ! Warmup
+.true. ! Production
+NNPDF30_nnlo_as_0118 ! PDF set
+antikt ! Jet algorithm, accepts 'kt', 'cam' or 'antikt'
+0.5d0 ! Rcut
+.false. ! exclusive
+1 ! Heavy particle decay type
+1d-7 ! Technical cutoff y0
+.true. ! angular averaging of the phase space, default to true
+2 ! Virtual Integration method, use 2 if you're not sure
+b ! RR a/b region flag. Accepts 'a','b' or 'all'.
+0 ! set to zero for MC, 2 for point test
+.false. ! print max weight flag
+.true. ! momentum mapping and PDF storage flag
+.true. ! colour sampling flag
+.false. ! explicit pole check flag, stops integration when set to true
+
+PHYSICAL_PARAMETERS
+8000d0 ! roots
+125d0 ! Mass of the Higgs Boson
+0.004029643852d0 ! Width of the Higgs Boson
+91.1876d0 ! Mass of the Z Boson
+2.4952d0 ! Width of the Z Boson
+80.398d0 ! Mass of the W Boson
+2.1054d0 ! Width of the W Boson
+173.2d0 ! Mass of the Top Quark
+1.41d0 ! Width of the Top Quark
+4.18d0 ! Mass of the Bottom Quark
+0d0 ! Width of the Bottom Quark
+1.275d0 ! Mass of the Charm Quark
+0d0 ! Width of the Charm Quark
+1000d0 ! Mass of the KK graviton
+0d0 ! Width of the KK graviton
+
+! UNIT_PHASE
+
+SELECTORS
+
+ !####### SYNTAX ######################
+ !##
+ !## [select|accept|reject] {observable-name} [min={val_min}] [max={val_max}]
+ !##
+ !#####################################
+ !#
+ !# * comments begin with the character `!` and will be excluded from the parser
+ !# just like this documentation block. This way, one can maintain various setups
+ !# in one runcard and comment in/out parts as needed.
+ !#
+ !# * multiple selectors are combined with a logical "and"
+ !#
+ !# * only necessary to specify at least one of the two: min, max
+ !#
+ !# * if both are set, the order of the min/max specification is irrelevant
+ !#
+ !# * each line here generates a new Selector and it is therefore better to reduce
+ !# the number of lines if possible. For instance the following cases are
+ !# all equivalent and the one-liners should be preferred:
+ !#
+ !# a) select ylp min = -5 ! --> accept [-5, +infty]
+ !# select ylp max = +5 ! --> accept [-infty, +5]
+ !# ! combined: [-5, +5]
+ !#
+ !# b) reject ylp max = -5 ! --> reject [+5, +infty]
+ !# reject ylp min = +5 ! --> reject [-infty, -5]
+ !# ! combined: [-5, +5]
+ !#
+ !# c) select ylp min = -5 max = +5 ! --> accept [-5, +5]
+ !#
+ !# d) select abs_ylp max = +5 ! --> accept |y| < 5 => [-5, +5]
+ !#
+ !# e) reject abs_ylp min = +5 ! --> reject |y| > 5 => [-5, +5]
+ !#
+ !# * the `reject` option actually has a very nice use-case in the exclusion
+ !# of the barrel--endcap region like this
+ !#
+ !# a) select abs_ylp max = +5 ! global selector
+ !# reject abs_ylp min = +1.4442 max = +1.560 ! CMS barrel-endcap region
+ !#
+ !# b) select ylp min = -5 max = -1.560
+ !# select ylp min = -1.4442 max = +1.4442
+ !# select ylp min = +1.560 max = +5
+ !#
+ !# where the second one is clearly more tedious to specify
+ !#
+ !#####################################
+
+
+ !----- jet veto
+ select jets_pt min = 30
+ select jets_abs_y max = 3
+ select jets_abs_eta max = 10
+
+ !----- for Z production we have two leptons (l^[+-] = l[pm])
+ select abs_ylp max=5
+ select abs_ylm max=5
+
+ !----- V = {lp, lm}
+ select mll min = 80 max = 100
+
+ !----- for inclusive ptz
+ !select njets min = 0
+ !select ptz min = 20
+
+END_SELECTORS
+
+
+
+HISTOGRAMS
+
+ !####### SYNTAX ######################
+ !##
+ !## a) equal-sized bins:
+ !## {observable-name}[>{file-name}] nbins={val_nbins} min={val_min} max={val_max}
+ !##
+ !## b) non-uniform bins:
+ !## {observable-name}[>{file-name}] [bound0,bound1,bound2,...,boundN]
+ !##
+ !## *) conditional binning:
+ !## dress a histogram with additional selectors by specifying them inside a block:
+ !##
+ !## HISTOGRAM_SELECTORS
+ !## {SELECTOR}
+ !## .
+ !## .
+ !## .
+ !## END_HISTOGRAM_SELECTORS
+ !##
+ !## where {SELECTOR} follows the same syntax described above. A binning into
+ !## this histogram is then only performed when the event passes all selectors
+ !## specified in this block.
+ !##
+ !#####################################
+ !#
+ !# * comments begin with the character `!` and will be excluded from the parser
+ !#
+ !#####################################
+
+ !----- these are mostly the histograms produced also in the `default` branch
+ !----- parsing works in any order of the assignments `x = val`
+
+ ptj1 nbins = 19 min = 30d0 max = 600d0 grid=ZJ-ptj1.fast
+ etaj1 nbins = 20 min =-3d0 max = 3d0 grid=ZJ-etaj1.fast
+ yz nbins = 20 min =-3d0 max = 3d0 grid=ZJ-yz.fast
+
+END_HISTOGRAMS
+
+
+
+SCALES
+
+ !####### SYNTAX ######################
+ !##
+ !## muf={scale-specifier} mur={scale-specifier}
+ !##
+ !#####################################
+ !#
+ !# * {scale-specifier}
+ !#
+ !# a) fixed scale: [{fac}*] {value}
+ !#
+ !# b) dynamic scale: [{fac}*] {observable-name}
+ !#
+ !# * the observable for dynamic scales must be [GeV] (this is not checked)
+ !#
+ !#####################################
+
+ !----- ZJ paper setup
+ !> fixed scales
+ muf = 91.1876 mur = 91.1876
+ ! muf = 2.0 * 91.1876 mur = 2.0 * 91.1876
+ ! muf = 0.5 * 91.1876 mur = 0.5 * 91.1876
+
+ !> dynamical scales
+ ! muf = mll mur = 2.0 * mll
+ ! muf = 2.0 * mll mur = mll
+
+ !> mix it up?
+ ! muf = 0.5 * mll mur = 1.0 * 91.1876
+ ! muf = 5 mur = 2.0 * ptj1
+
+END_SCALES
+
+
+
+!####### SYNTAX ######################
+!##
+!## REWEIGHT {observable-name}**{val_power}
+!##
+!#####################################
+
+! REWEIGHT ht_part**4
+
+
+
+!####### SYNTAX ######################
+!##
+!## PHOTON_ISOLATION {algorithm} {algorithm-options}
+!##
+!#####################################
+!#
+!# * Frixione:
+!#
+!# PHOTON_ISOLATION frix delta={var} epsilon={var} n={var}
+!#
+!# * cut on sum(ET) inside a cone around the photon:
+!#
+!# PHOTON_ISOLATION etsum delta={var} etmax={var}
+!#
+!#####################################
+
+!PHOTON_ISOLATION frix delta = 0.5 epsilon = 0.1 n = 1
+!PHOTON_ISOLATION etsum delta = 0.5 etmax = 10
+
+
+
+CHANNELS
+
+ !####### SYNTAX ######################
+ !##
+ !## list of process id's (see selectchannelXYZ.f)
+ !##
+ !#####################################
+ !#
+ !# * any number of whitespace-separated process id's in one line allowed
+ !#
+ !# * self-explaning wild-cards:
+ !# - ALL
+ !# - LO, NLO, NNLO
+ !# - V, R
+ !# - VV, RV, RR
+ !#
+ !#####################################
+
+ RR ! process
+
+ ! 1 ! one B channel
+ ! 13 ! one R channel
+ ! 73 ! one V channel
+ ! 163 ! one RR channel
+ ! 317 ! one RV channel
+ ! 617 ! one VV channel
+
+ ! 17 18 31 32 ! qg-initiated R contributions
+
+END_CHANNELS
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ZJ/Testrun/ZJ.NNLO-RV-fastprod.run
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ZJ/Testrun/ZJ.NNLO-RV-fastprod.run (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ZJ/Testrun/ZJ.NNLO-RV-fastprod.run (revision 1772)
@@ -0,0 +1,251 @@
+NNLOJET_RUNCARD
+NNLO-RV ! Job name id, must be less than 10 characters
+ZJ ! Process name
+@EVENTS@ ! Number of events
+1 ! Number of iterations
+@SEED@ ! Seed number
+.false. ! Warmup
+.true. ! Production
+NNPDF30_nnlo_as_0118 ! PDF set
+antikt ! Jet algorithm, accepts 'kt', 'cam' or 'antikt'
+0.5d0 ! Rcut
+.false. ! exclusive
+1 ! Heavy particle decay type
+1d-7 ! Technical cutoff y0
+.true. ! angular averaging of the phase space, default to true
+2 ! Virtual Integration method, use 2 if you're not sure
+all ! RR a/b region flag. Accepts 'a','b' or 'all'.
+0 ! set to zero for MC, 2 for point test
+.false. ! print max weight flag
+.true. ! momentum mapping and PDF storage flag
+.true. ! colour sampling flag
+.false. ! explicit pole check flag, stops integration when set to true
+
+PHYSICAL_PARAMETERS
+8000d0 ! roots
+125d0 ! Mass of the Higgs Boson
+0.004029643852d0 ! Width of the Higgs Boson
+91.1876d0 ! Mass of the Z Boson
+2.4952d0 ! Width of the Z Boson
+80.398d0 ! Mass of the W Boson
+2.1054d0 ! Width of the W Boson
+173.2d0 ! Mass of the Top Quark
+1.41d0 ! Width of the Top Quark
+4.18d0 ! Mass of the Bottom Quark
+0d0 ! Width of the Bottom Quark
+1.275d0 ! Mass of the Charm Quark
+0d0 ! Width of the Charm Quark
+1000d0 ! Mass of the KK graviton
+0d0 ! Width of the KK graviton
+
+! UNIT_PHASE
+
+SELECTORS
+
+ !####### SYNTAX ######################
+ !##
+ !## [select|accept|reject] {observable-name} [min={val_min}] [max={val_max}]
+ !##
+ !#####################################
+ !#
+ !# * comments begin with the character `!` and will be excluded from the parser
+ !# just like this documentation block. This way, one can maintain various setups
+ !# in one runcard and comment in/out parts as needed.
+ !#
+ !# * multiple selectors are combined with a logical "and"
+ !#
+ !# * only necessary to specify at least one of the two: min, max
+ !#
+ !# * if both are set, the order of the min/max specification is irrelevant
+ !#
+ !# * each line here generates a new Selector and it is therefore better to reduce
+ !# the number of lines if possible. For instance the following cases are
+ !# all equivalent and the one-liners should be preferred:
+ !#
+ !# a) select ylp min = -5 ! --> accept [-5, +infty]
+ !# select ylp max = +5 ! --> accept [-infty, +5]
+ !# ! combined: [-5, +5]
+ !#
+ !# b) reject ylp max = -5 ! --> reject [+5, +infty]
+ !# reject ylp min = +5 ! --> reject [-infty, -5]
+ !# ! combined: [-5, +5]
+ !#
+ !# c) select ylp min = -5 max = +5 ! --> accept [-5, +5]
+ !#
+ !# d) select abs_ylp max = +5 ! --> accept |y| < 5 => [-5, +5]
+ !#
+ !# e) reject abs_ylp min = +5 ! --> reject |y| > 5 => [-5, +5]
+ !#
+ !# * the `reject` option actually has a very nice use-case in the exclusion
+ !# of the barrel--endcap region like this
+ !#
+ !# a) select abs_ylp max = +5 ! global selector
+ !# reject abs_ylp min = +1.4442 max = +1.560 ! CMS barrel-endcap region
+ !#
+ !# b) select ylp min = -5 max = -1.560
+ !# select ylp min = -1.4442 max = +1.4442
+ !# select ylp min = +1.560 max = +5
+ !#
+ !# where the second one is clearly more tedious to specify
+ !#
+ !#####################################
+
+
+ !----- jet veto
+ select jets_pt min = 30
+ select jets_abs_y max = 3
+ select jets_abs_eta max = 10
+
+ !----- for Z production we have two leptons (l^[+-] = l[pm])
+ select abs_ylp max=5
+ select abs_ylm max=5
+
+ !----- V = {lp, lm}
+ select mll min = 80 max = 100
+
+ !----- for inclusive ptz
+ !select njets min = 0
+ !select ptz min = 20
+
+END_SELECTORS
+
+
+
+HISTOGRAMS
+
+ !####### SYNTAX ######################
+ !##
+ !## a) equal-sized bins:
+ !## {observable-name}[>{file-name}] nbins={val_nbins} min={val_min} max={val_max}
+ !##
+ !## b) non-uniform bins:
+ !## {observable-name}[>{file-name}] [bound0,bound1,bound2,...,boundN]
+ !##
+ !## *) conditional binning:
+ !## dress a histogram with additional selectors by specifying them inside a block:
+ !##
+ !## HISTOGRAM_SELECTORS
+ !## {SELECTOR}
+ !## .
+ !## .
+ !## .
+ !## END_HISTOGRAM_SELECTORS
+ !##
+ !## where {SELECTOR} follows the same syntax described above. A binning into
+ !## this histogram is then only performed when the event passes all selectors
+ !## specified in this block.
+ !##
+ !#####################################
+ !#
+ !# * comments begin with the character `!` and will be excluded from the parser
+ !#
+ !#####################################
+
+ !----- these are mostly the histograms produced also in the `default` branch
+ !----- parsing works in any order of the assignments `x = val`
+
+ ptj1 nbins = 19 min = 30d0 max = 600d0 grid=ZJ-ptj1.fast
+ etaj1 nbins = 20 min =-3d0 max = 3d0 grid=ZJ-etaj1.fast
+ yz nbins = 20 min =-3d0 max = 3d0 grid=ZJ-yz.fast
+
+END_HISTOGRAMS
+
+
+
+SCALES
+
+ !####### SYNTAX ######################
+ !##
+ !## muf={scale-specifier} mur={scale-specifier}
+ !##
+ !#####################################
+ !#
+ !# * {scale-specifier}
+ !#
+ !# a) fixed scale: [{fac}*] {value}
+ !#
+ !# b) dynamic scale: [{fac}*] {observable-name}
+ !#
+ !# * the observable for dynamic scales must be [GeV] (this is not checked)
+ !#
+ !#####################################
+
+ !----- ZJ paper setup
+ !> fixed scales
+ muf = 91.1876 mur = 91.1876
+ ! muf = 2.0 * 91.1876 mur = 2.0 * 91.1876
+ ! muf = 0.5 * 91.1876 mur = 0.5 * 91.1876
+
+ !> dynamical scales
+ ! muf = mll mur = 2.0 * mll
+ ! muf = 2.0 * mll mur = mll
+
+ !> mix it up?
+ ! muf = 0.5 * mll mur = 1.0 * 91.1876
+ ! muf = 5 mur = 2.0 * ptj1
+
+END_SCALES
+
+
+
+!####### SYNTAX ######################
+!##
+!## REWEIGHT {observable-name}**{val_power}
+!##
+!#####################################
+
+! REWEIGHT ht_part**4
+
+
+
+!####### SYNTAX ######################
+!##
+!## PHOTON_ISOLATION {algorithm} {algorithm-options}
+!##
+!#####################################
+!#
+!# * Frixione:
+!#
+!# PHOTON_ISOLATION frix delta={var} epsilon={var} n={var}
+!#
+!# * cut on sum(ET) inside a cone around the photon:
+!#
+!# PHOTON_ISOLATION etsum delta={var} etmax={var}
+!#
+!#####################################
+
+!PHOTON_ISOLATION frix delta = 0.5 epsilon = 0.1 n = 1
+!PHOTON_ISOLATION etsum delta = 0.5 etmax = 10
+
+
+
+CHANNELS
+
+ !####### SYNTAX ######################
+ !##
+ !## list of process id's (see selectchannelXYZ.f)
+ !##
+ !#####################################
+ !#
+ !# * any number of whitespace-separated process id's in one line allowed
+ !#
+ !# * self-explaning wild-cards:
+ !# - ALL
+ !# - LO, NLO, NNLO
+ !# - V, R
+ !# - VV, RV, RR
+ !#
+ !#####################################
+
+ RV ! process
+
+ ! 1 ! one B channel
+ ! 13 ! one R channel
+ ! 73 ! one V channel
+ ! 163 ! one RR channel
+ ! 317 ! one RV channel
+ ! 617 ! one VV channel
+
+ ! 17 18 31 32 ! qg-initiated R contributions
+
+END_CHANNELS
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ZJ/Testrun/ZJ.NLO-V-fastprod.run
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ZJ/Testrun/ZJ.NLO-V-fastprod.run (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ZJ/Testrun/ZJ.NLO-V-fastprod.run (revision 1772)
@@ -0,0 +1,251 @@
+NNLOJET_RUNCARD
+NLO-V ! Job name id, must be less than 10 characters
+ZJ ! Process name
+@EVENTS@ ! Number of events
+1 ! Number of iterations
+@SEED@ ! Seed number
+.false. ! Warmup
+.true. ! Production
+NNPDF30_nnlo_as_0118 ! PDF set
+antikt ! Jet algorithm, accepts 'kt', 'cam' or 'antikt'
+0.5d0 ! Rcut
+.false. ! exclusive
+1 ! Heavy particle decay type
+1d-7 ! Technical cutoff y0
+.true. ! angular averaging of the phase space, default to true
+2 ! Virtual Integration method, use 2 if you're not sure
+all ! RR a/b region flag. Accepts 'a','b' or 'all'.
+0 ! set to zero for MC, 2 for point test
+.false. ! print max weight flag
+.true. ! momentum mapping and PDF storage flag
+.true. ! colour sampling flag
+.false. ! explicit pole check flag, stops integration when set to true
+
+PHYSICAL_PARAMETERS
+8000d0 ! roots
+125d0 ! Mass of the Higgs Boson
+0.004029643852d0 ! Width of the Higgs Boson
+91.1876d0 ! Mass of the Z Boson
+2.4952d0 ! Width of the Z Boson
+80.398d0 ! Mass of the W Boson
+2.1054d0 ! Width of the W Boson
+173.2d0 ! Mass of the Top Quark
+1.41d0 ! Width of the Top Quark
+4.18d0 ! Mass of the Bottom Quark
+0d0 ! Width of the Bottom Quark
+1.275d0 ! Mass of the Charm Quark
+0d0 ! Width of the Charm Quark
+1000d0 ! Mass of the KK graviton
+0d0 ! Width of the KK graviton
+
+! UNIT_PHASE
+
+SELECTORS
+
+ !####### SYNTAX ######################
+ !##
+ !## [select|accept|reject] {observable-name} [min={val_min}] [max={val_max}]
+ !##
+ !#####################################
+ !#
+ !# * comments begin with the character `!` and will be excluded from the parser
+ !# just like this documentation block. This way, one can maintain various setups
+ !# in one runcard and comment in/out parts as needed.
+ !#
+ !# * multiple selectors are combined with a logical "and"
+ !#
+ !# * only necessary to specify at least one of the two: min, max
+ !#
+ !# * if both are set, the order of the min/max specification is irrelevant
+ !#
+ !# * each line here generates a new Selector and it is therefore better to reduce
+ !# the number of lines if possible. For instance the following cases are
+ !# all equivalent and the one-liners should be preferred:
+ !#
+ !# a) select ylp min = -5 ! --> accept [-5, +infty]
+ !# select ylp max = +5 ! --> accept [-infty, +5]
+ !# ! combined: [-5, +5]
+ !#
+ !# b) reject ylp max = -5 ! --> reject [+5, +infty]
+ !# reject ylp min = +5 ! --> reject [-infty, -5]
+ !# ! combined: [-5, +5]
+ !#
+ !# c) select ylp min = -5 max = +5 ! --> accept [-5, +5]
+ !#
+ !# d) select abs_ylp max = +5 ! --> accept |y| < 5 => [-5, +5]
+ !#
+ !# e) reject abs_ylp min = +5 ! --> reject |y| > 5 => [-5, +5]
+ !#
+ !# * the `reject` option actually has a very nice use-case in the exclusion
+ !# of the barrel--endcap region like this
+ !#
+ !# a) select abs_ylp max = +5 ! global selector
+ !# reject abs_ylp min = +1.4442 max = +1.560 ! CMS barrel-endcap region
+ !#
+ !# b) select ylp min = -5 max = -1.560
+ !# select ylp min = -1.4442 max = +1.4442
+ !# select ylp min = +1.560 max = +5
+ !#
+ !# where the second one is clearly more tedious to specify
+ !#
+ !#####################################
+
+
+ !----- jet veto
+ select jets_pt min = 30
+ select jets_abs_y max = 3
+ select jets_abs_eta max = 10
+
+ !----- for Z production we have two leptons (l^[+-] = l[pm])
+ select abs_ylp max=5
+ select abs_ylm max=5
+
+ !----- V = {lp, lm}
+ select mll min = 80 max = 100
+
+ !----- for inclusive ptz
+ !select njets min = 0
+ !select ptz min = 20
+
+END_SELECTORS
+
+
+
+HISTOGRAMS
+
+ !####### SYNTAX ######################
+ !##
+ !## a) equal-sized bins:
+ !## {observable-name}[>{file-name}] nbins={val_nbins} min={val_min} max={val_max}
+ !##
+ !## b) non-uniform bins:
+ !## {observable-name}[>{file-name}] [bound0,bound1,bound2,...,boundN]
+ !##
+ !## *) conditional binning:
+ !## dress a histogram with additional selectors by specifying them inside a block:
+ !##
+ !## HISTOGRAM_SELECTORS
+ !## {SELECTOR}
+ !## .
+ !## .
+ !## .
+ !## END_HISTOGRAM_SELECTORS
+ !##
+ !## where {SELECTOR} follows the same syntax described above. A binning into
+ !## this histogram is then only performed when the event passes all selectors
+ !## specified in this block.
+ !##
+ !#####################################
+ !#
+ !# * comments begin with the character `!` and will be excluded from the parser
+ !#
+ !#####################################
+
+ !----- these are mostly the histograms produced also in the `default` branch
+ !----- parsing works in any order of the assignments `x = val`
+
+ ptj1 nbins = 19 min = 30d0 max = 600d0 grid=ZJ-ptj1.fast
+ etaj1 nbins = 20 min =-3d0 max = 3d0 grid=ZJ-etaj1.fast
+ yz nbins = 20 min =-3d0 max = 3d0 grid=ZJ-yz.fast
+
+END_HISTOGRAMS
+
+
+
+SCALES
+
+ !####### SYNTAX ######################
+ !##
+ !## muf={scale-specifier} mur={scale-specifier}
+ !##
+ !#####################################
+ !#
+ !# * {scale-specifier}
+ !#
+ !# a) fixed scale: [{fac}*] {value}
+ !#
+ !# b) dynamic scale: [{fac}*] {observable-name}
+ !#
+ !# * the observable for dynamic scales must be [GeV] (this is not checked)
+ !#
+ !#####################################
+
+ !----- ZJ paper setup
+ !> fixed scales
+ muf = 91.1876 mur = 91.1876
+ ! muf = 2.0 * 91.1876 mur = 2.0 * 91.1876
+ ! muf = 0.5 * 91.1876 mur = 0.5 * 91.1876
+
+ !> dynamical scales
+ ! muf = mll mur = 2.0 * mll
+ ! muf = 2.0 * mll mur = mll
+
+ !> mix it up?
+ ! muf = 0.5 * mll mur = 1.0 * 91.1876
+ ! muf = 5 mur = 2.0 * ptj1
+
+END_SCALES
+
+
+
+!####### SYNTAX ######################
+!##
+!## REWEIGHT {observable-name}**{val_power}
+!##
+!#####################################
+
+! REWEIGHT ht_part**4
+
+
+
+!####### SYNTAX ######################
+!##
+!## PHOTON_ISOLATION {algorithm} {algorithm-options}
+!##
+!#####################################
+!#
+!# * Frixione:
+!#
+!# PHOTON_ISOLATION frix delta={var} epsilon={var} n={var}
+!#
+!# * cut on sum(ET) inside a cone around the photon:
+!#
+!# PHOTON_ISOLATION etsum delta={var} etmax={var}
+!#
+!#####################################
+
+!PHOTON_ISOLATION frix delta = 0.5 epsilon = 0.1 n = 1
+!PHOTON_ISOLATION etsum delta = 0.5 etmax = 10
+
+
+
+CHANNELS
+
+ !####### SYNTAX ######################
+ !##
+ !## list of process id's (see selectchannelXYZ.f)
+ !##
+ !#####################################
+ !#
+ !# * any number of whitespace-separated process id's in one line allowed
+ !#
+ !# * self-explaning wild-cards:
+ !# - ALL
+ !# - LO, NLO, NNLO
+ !# - V, R
+ !# - VV, RV, RR
+ !#
+ !#####################################
+
+ V ! process
+
+ ! 1 ! one B channel
+ ! 13 ! one R channel
+ ! 73 ! one V channel
+ ! 163 ! one RR channel
+ ! 317 ! one RV channel
+ ! 617 ! one VV channel
+
+ ! 17 18 31 32 ! qg-initiated R contributions
+
+END_CHANNELS
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ZJ/Testrun/ZJ.LO-prod.run
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ZJ/Testrun/ZJ.LO-prod.run (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ZJ/Testrun/ZJ.LO-prod.run (revision 1772)
@@ -0,0 +1,251 @@
+NNLOJET_RUNCARD
+LO ! Job name id, must be less than 10 characters
+ZJ ! Process name
+@EVENTS@ ! Number of events
+1 ! Number of iterations
+@SEED@ ! Seed number
+.false. ! Warmup
+.true. ! Production
+NNPDF30_nnlo_as_0118 ! PDF set
+antikt ! Jet algorithm, accepts 'kt', 'cam' or 'antikt'
+0.5d0 ! Rcut
+.false. ! exclusive
+1 ! Heavy particle decay type
+1d-7 ! Technical cutoff y0
+.true. ! angular averaging of the phase space, default to true
+2 ! Virtual Integration method, use 2 if you're not sure
+all ! RR a/b region flag. Accepts 'a','b' or 'all'.
+0 ! set to zero for MC, 2 for point test
+.false. ! print max weight flag
+.true. ! momentum mapping and PDF storage flag
+.true. ! colour sampling flag
+.false. ! explicit pole check flag, stops integration when set to true
+
+PHYSICAL_PARAMETERS
+8000d0 ! roots
+125d0 ! Mass of the Higgs Boson
+0.004029643852d0 ! Width of the Higgs Boson
+91.1876d0 ! Mass of the Z Boson
+2.4952d0 ! Width of the Z Boson
+80.398d0 ! Mass of the W Boson
+2.1054d0 ! Width of the W Boson
+173.2d0 ! Mass of the Top Quark
+1.41d0 ! Width of the Top Quark
+4.18d0 ! Mass of the Bottom Quark
+0d0 ! Width of the Bottom Quark
+1.275d0 ! Mass of the Charm Quark
+0d0 ! Width of the Charm Quark
+1000d0 ! Mass of the KK graviton
+0d0 ! Width of the KK graviton
+
+! UNIT_PHASE
+
+SELECTORS
+
+ !####### SYNTAX ######################
+ !##
+ !## [select|accept|reject] {observable-name} [min={val_min}] [max={val_max}]
+ !##
+ !#####################################
+ !#
+ !# * comments begin with the character `!` and will be excluded from the parser
+ !# just like this documentation block. This way, one can maintain various setups
+ !# in one runcard and comment in/out parts as needed.
+ !#
+ !# * multiple selectors are combined with a logical "and"
+ !#
+ !# * only necessary to specify at least one of the two: min, max
+ !#
+ !# * if both are set, the order of the min/max specification is irrelevant
+ !#
+ !# * each line here generates a new Selector and it is therefore better to reduce
+ !# the number of lines if possible. For instance the following cases are
+ !# all equivalent and the one-liners should be preferred:
+ !#
+ !# a) select ylp min = -5 ! --> accept [-5, +infty]
+ !# select ylp max = +5 ! --> accept [-infty, +5]
+ !# ! combined: [-5, +5]
+ !#
+ !# b) reject ylp max = -5 ! --> reject [+5, +infty]
+ !# reject ylp min = +5 ! --> reject [-infty, -5]
+ !# ! combined: [-5, +5]
+ !#
+ !# c) select ylp min = -5 max = +5 ! --> accept [-5, +5]
+ !#
+ !# d) select abs_ylp max = +5 ! --> accept |y| < 5 => [-5, +5]
+ !#
+ !# e) reject abs_ylp min = +5 ! --> reject |y| > 5 => [-5, +5]
+ !#
+ !# * the `reject` option actually has a very nice use-case in the exclusion
+ !# of the barrel--endcap region like this
+ !#
+ !# a) select abs_ylp max = +5 ! global selector
+ !# reject abs_ylp min = +1.4442 max = +1.560 ! CMS barrel-endcap region
+ !#
+ !# b) select ylp min = -5 max = -1.560
+ !# select ylp min = -1.4442 max = +1.4442
+ !# select ylp min = +1.560 max = +5
+ !#
+ !# where the second one is clearly more tedious to specify
+ !#
+ !#####################################
+
+
+ !----- jet veto
+ select jets_pt min = 30
+ select jets_abs_y max = 3
+ select jets_abs_eta max = 10
+
+ !----- for Z production we have two leptons (l^[+-] = l[pm])
+ select abs_ylp max=5
+ select abs_ylm max=5
+
+ !----- V = {lp, lm}
+ select mll min = 80 max = 100
+
+ !----- for inclusive ptz
+ !select njets min = 0
+ !select ptz min = 20
+
+END_SELECTORS
+
+
+
+HISTOGRAMS
+
+ !####### SYNTAX ######################
+ !##
+ !## a) equal-sized bins:
+ !## {observable-name}[>{file-name}] nbins={val_nbins} min={val_min} max={val_max}
+ !##
+ !## b) non-uniform bins:
+ !## {observable-name}[>{file-name}] [bound0,bound1,bound2,...,boundN]
+ !##
+ !## *) conditional binning:
+ !## dress a histogram with additional selectors by specifying them inside a block:
+ !##
+ !## HISTOGRAM_SELECTORS
+ !## {SELECTOR}
+ !## .
+ !## .
+ !## .
+ !## END_HISTOGRAM_SELECTORS
+ !##
+ !## where {SELECTOR} follows the same syntax described above. A binning into
+ !## this histogram is then only performed when the event passes all selectors
+ !## specified in this block.
+ !##
+ !#####################################
+ !#
+ !# * comments begin with the character `!` and will be excluded from the parser
+ !#
+ !#####################################
+
+ !----- these are mostly the histograms produced also in the `default` branch
+ !----- parsing works in any order of the assignments `x = val`
+
+ ptj1 nbins = 19 min = 30d0 max = 600d0
+ etaj1 nbins = 20 min =-3d0 max = 3d0
+ yz nbins = 20 min =-3d0 max = 3d0
+
+END_HISTOGRAMS
+
+
+
+SCALES
+
+ !####### SYNTAX ######################
+ !##
+ !## muf={scale-specifier} mur={scale-specifier}
+ !##
+ !#####################################
+ !#
+ !# * {scale-specifier}
+ !#
+ !# a) fixed scale: [{fac}*] {value}
+ !#
+ !# b) dynamic scale: [{fac}*] {observable-name}
+ !#
+ !# * the observable for dynamic scales must be [GeV] (this is not checked)
+ !#
+ !#####################################
+
+ !----- ZJ paper setup
+ !> fixed scales
+ muf = 91.1876 mur = 91.1876
+ ! muf = 2.0 * 91.1876 mur = 2.0 * 91.1876
+ ! muf = 0.5 * 91.1876 mur = 0.5 * 91.1876
+
+ !> dynamical scales
+ ! muf = mll mur = 2.0 * mll
+ ! muf = 2.0 * mll mur = mll
+
+ !> mix it up?
+ ! muf = 0.5 * mll mur = 1.0 * 91.1876
+ ! muf = 5 mur = 2.0 * ptj1
+
+END_SCALES
+
+
+
+!####### SYNTAX ######################
+!##
+!## REWEIGHT {observable-name}**{val_power}
+!##
+!#####################################
+
+! REWEIGHT ht_part**4
+
+
+
+!####### SYNTAX ######################
+!##
+!## PHOTON_ISOLATION {algorithm} {algorithm-options}
+!##
+!#####################################
+!#
+!# * Frixione:
+!#
+!# PHOTON_ISOLATION frix delta={var} epsilon={var} n={var}
+!#
+!# * cut on sum(ET) inside a cone around the photon:
+!#
+!# PHOTON_ISOLATION etsum delta={var} etmax={var}
+!#
+!#####################################
+
+!PHOTON_ISOLATION frix delta = 0.5 epsilon = 0.1 n = 1
+!PHOTON_ISOLATION etsum delta = 0.5 etmax = 10
+
+
+
+CHANNELS
+
+ !####### SYNTAX ######################
+ !##
+ !## list of process id's (see selectchannelXYZ.f)
+ !##
+ !#####################################
+ !#
+ !# * any number of whitespace-separated process id's in one line allowed
+ !#
+ !# * self-explaning wild-cards:
+ !# - ALL
+ !# - LO, NLO, NNLO
+ !# - V, R
+ !# - VV, RV, RR
+ !#
+ !#####################################
+
+ LO ! process
+
+ ! 1 ! one B channel
+ ! 13 ! one R channel
+ ! 73 ! one V channel
+ ! 163 ! one RR channel
+ ! 317 ! one RV channel
+ ! 617 ! one VV channel
+
+ ! 17 18 31 32 ! qg-initiated R contributions
+
+END_CHANNELS
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ZJ/Testrun/ZJ.NLO-R-fastwarmup.run
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ZJ/Testrun/ZJ.NLO-R-fastwarmup.run (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/data/ZJ/Testrun/ZJ.NLO-R-fastwarmup.run (revision 1772)
@@ -0,0 +1,251 @@
+NNLOJET_RUNCARD
+NLO-R ! Job name id, must be less than 10 characters
+ZJ ! Process name
+@EVENTS@ ! Number of events
+1 ! Number of iterations
+@SEED@ ! Seed number
+.false. ! Warmup
+.true. ! Production
+NNPDF30_nnlo_as_0118 ! PDF set
+antikt ! Jet algorithm, accepts 'kt', 'cam' or 'antikt'
+0.5d0 ! Rcut
+.false. ! exclusive
+1 ! Heavy particle decay type
+1d-7 ! Technical cutoff y0
+.true. ! angular averaging of the phase space, default to true
+2 ! Virtual Integration method, use 2 if you're not sure
+all ! RR a/b region flag. Accepts 'a','b' or 'all'.
+0 ! set to zero for MC, 2 for point test
+.false. ! print max weight flag
+.true. ! momentum mapping and PDF storage flag
+.true. ! colour sampling flag
+.false. ! explicit pole check flag, stops integration when set to true
+
+PHYSICAL_PARAMETERS
+8000d0 ! roots
+125d0 ! Mass of the Higgs Boson
+0.004029643852d0 ! Width of the Higgs Boson
+91.1876d0 ! Mass of the Z Boson
+2.4952d0 ! Width of the Z Boson
+80.398d0 ! Mass of the W Boson
+2.1054d0 ! Width of the W Boson
+173.2d0 ! Mass of the Top Quark
+1.41d0 ! Width of the Top Quark
+4.18d0 ! Mass of the Bottom Quark
+0d0 ! Width of the Bottom Quark
+1.275d0 ! Mass of the Charm Quark
+0d0 ! Width of the Charm Quark
+1000d0 ! Mass of the KK graviton
+0d0 ! Width of the KK graviton
+
+UNIT_PHASE
+
+SELECTORS
+
+ !####### SYNTAX ######################
+ !##
+ !## [select|accept|reject] {observable-name} [min={val_min}] [max={val_max}]
+ !##
+ !#####################################
+ !#
+ !# * comments begin with the character `!` and will be excluded from the parser
+ !# just like this documentation block. This way, one can maintain various setups
+ !# in one runcard and comment in/out parts as needed.
+ !#
+ !# * multiple selectors are combined with a logical "and"
+ !#
+ !# * only necessary to specify at least one of the two: min, max
+ !#
+ !# * if both are set, the order of the min/max specification is irrelevant
+ !#
+ !# * each line here generates a new Selector and it is therefore better to reduce
+ !# the number of lines if possible. For instance the following cases are
+ !# all equivalent and the one-liners should be preferred:
+ !#
+ !# a) select ylp min = -5 ! --> accept [-5, +infty]
+ !# select ylp max = +5 ! --> accept [-infty, +5]
+ !# ! combined: [-5, +5]
+ !#
+ !# b) reject ylp max = -5 ! --> reject [+5, +infty]
+ !# reject ylp min = +5 ! --> reject [-infty, -5]
+ !# ! combined: [-5, +5]
+ !#
+ !# c) select ylp min = -5 max = +5 ! --> accept [-5, +5]
+ !#
+ !# d) select abs_ylp max = +5 ! --> accept |y| < 5 => [-5, +5]
+ !#
+ !# e) reject abs_ylp min = +5 ! --> reject |y| > 5 => [-5, +5]
+ !#
+ !# * the `reject` option actually has a very nice use-case in the exclusion
+ !# of the barrel--endcap region like this
+ !#
+ !# a) select abs_ylp max = +5 ! global selector
+ !# reject abs_ylp min = +1.4442 max = +1.560 ! CMS barrel-endcap region
+ !#
+ !# b) select ylp min = -5 max = -1.560
+ !# select ylp min = -1.4442 max = +1.4442
+ !# select ylp min = +1.560 max = +5
+ !#
+ !# where the second one is clearly more tedious to specify
+ !#
+ !#####################################
+
+
+ !----- jet veto
+ select jets_pt min = 30
+ select jets_abs_y max = 3
+ select jets_abs_eta max = 10
+
+ !----- for Z production we have two leptons (l^[+-] = l[pm])
+ select abs_ylp max=5
+ select abs_ylm max=5
+
+ !----- V = {lp, lm}
+ select mll min = 80 max = 100
+
+ !----- for inclusive ptz
+ !select njets min = 0
+ !select ptz min = 20
+
+END_SELECTORS
+
+
+
+HISTOGRAMS
+
+ !####### SYNTAX ######################
+ !##
+ !## a) equal-sized bins:
+ !## {observable-name}[>{file-name}] nbins={val_nbins} min={val_min} max={val_max}
+ !##
+ !## b) non-uniform bins:
+ !## {observable-name}[>{file-name}] [bound0,bound1,bound2,...,boundN]
+ !##
+ !## *) conditional binning:
+ !## dress a histogram with additional selectors by specifying them inside a block:
+ !##
+ !## HISTOGRAM_SELECTORS
+ !## {SELECTOR}
+ !## .
+ !## .
+ !## .
+ !## END_HISTOGRAM_SELECTORS
+ !##
+ !## where {SELECTOR} follows the same syntax described above. A binning into
+ !## this histogram is then only performed when the event passes all selectors
+ !## specified in this block.
+ !##
+ !#####################################
+ !#
+ !# * comments begin with the character `!` and will be excluded from the parser
+ !#
+ !#####################################
+
+ !----- these are mostly the histograms produced also in the `default` branch
+ !----- parsing works in any order of the assignments `x = val`
+
+ ptj1 nbins = 19 min = 30d0 max = 600d0 grid=ZJ-ptj1.fast
+ etaj1 nbins = 20 min =-3d0 max = 3d0 grid=ZJ-etaj1.fast
+ yz nbins = 20 min =-3d0 max = 3d0 grid=ZJ-yz.fast
+
+END_HISTOGRAMS
+
+
+
+SCALES
+
+ !####### SYNTAX ######################
+ !##
+ !## muf={scale-specifier} mur={scale-specifier}
+ !##
+ !#####################################
+ !#
+ !# * {scale-specifier}
+ !#
+ !# a) fixed scale: [{fac}*] {value}
+ !#
+ !# b) dynamic scale: [{fac}*] {observable-name}
+ !#
+ !# * the observable for dynamic scales must be [GeV] (this is not checked)
+ !#
+ !#####################################
+
+ !----- ZJ paper setup
+ !> fixed scales
+ muf = 91.1876 mur = 91.1876
+ ! muf = 2.0 * 91.1876 mur = 2.0 * 91.1876
+ ! muf = 0.5 * 91.1876 mur = 0.5 * 91.1876
+
+ !> dynamical scales
+ ! muf = mll mur = 2.0 * mll
+ ! muf = 2.0 * mll mur = mll
+
+ !> mix it up?
+ ! muf = 0.5 * mll mur = 1.0 * 91.1876
+ ! muf = 5 mur = 2.0 * ptj1
+
+END_SCALES
+
+
+
+!####### SYNTAX ######################
+!##
+!## REWEIGHT {observable-name}**{val_power}
+!##
+!#####################################
+
+! REWEIGHT ht_part**4
+
+
+
+!####### SYNTAX ######################
+!##
+!## PHOTON_ISOLATION {algorithm} {algorithm-options}
+!##
+!#####################################
+!#
+!# * Frixione:
+!#
+!# PHOTON_ISOLATION frix delta={var} epsilon={var} n={var}
+!#
+!# * cut on sum(ET) inside a cone around the photon:
+!#
+!# PHOTON_ISOLATION etsum delta={var} etmax={var}
+!#
+!#####################################
+
+!PHOTON_ISOLATION frix delta = 0.5 epsilon = 0.1 n = 1
+!PHOTON_ISOLATION etsum delta = 0.5 etmax = 10
+
+
+
+CHANNELS
+
+ !####### SYNTAX ######################
+ !##
+ !## list of process id's (see selectchannelXYZ.f)
+ !##
+ !#####################################
+ !#
+ !# * any number of whitespace-separated process id's in one line allowed
+ !#
+ !# * self-explaning wild-cards:
+ !# - ALL
+ !# - LO, NLO, NNLO
+ !# - V, R
+ !# - VV, RV, RR
+ !#
+ !#####################################
+
+ R ! process
+
+ ! 1 ! one B channel
+ ! 13 ! one R channel
+ ! 73 ! one V channel
+ ! 163 ! one RR channel
+ ! 317 ! one RV channel
+ ! 617 ! one VV channel
+
+ ! 17 18 31 32 ! qg-initiated R contributions
+
+END_CHANNELS
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/Makefile.am
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/Makefile.am (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/Makefile.am (revision 1772)
@@ -0,0 +1,14 @@
+AUTOMAKE_OPTIONS = foreign
+ACLOCAL = aclocal
+ACLOCAL_AMFLAGS = -I m4
+AUTOMAKE= automake
+docdir = ${datadir}/doc/${PACKAGE}
+dist_doc_DATA = README INSTALL COPYING
+clean-local:
+ rm -rf autom4te.cache
+SUBDIRS= \
+ src bin
+
+## Clean out SVN files and root dictionaries
+dist-hook:
+ rm -rf `find $(distdir) -name ".svn"` `find $(distdir) -name \*Dict\*`
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/missing
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/missing (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/missing (revision 1772)
@@ -0,0 +1,376 @@
+#! /bin/sh
+# Common stub for a few missing GNU programs while installing.
+
+scriptversion=2009-04-28.21; # UTC
+
+# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006,
+# 2008, 2009 Free Software Foundation, Inc.
+# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+if test $# -eq 0; then
+ echo 1>&2 "Try \`$0 --help' for more information"
+ exit 1
+fi
+
+run=:
+sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p'
+sed_minuso='s/.* -o \([^ ]*\).*/\1/p'
+
+# In the cases where this matters, `missing' is being run in the
+# srcdir already.
+if test -f configure.ac; then
+ configure_ac=configure.ac
+else
+ configure_ac=configure.in
+fi
+
+msg="missing on your system"
+
+case $1 in
+--run)
+ # Try to run requested program, and just exit if it succeeds.
+ run=
+ shift
+ "$@" && exit 0
+ # Exit code 63 means version mismatch. This often happens
+ # when the user try to use an ancient version of a tool on
+ # a file that requires a minimum version. In this case we
+ # we should proceed has if the program had been absent, or
+ # if --run hadn't been passed.
+ if test $? = 63; then
+ run=:
+ msg="probably too old"
+ fi
+ ;;
+
+ -h|--h|--he|--hel|--help)
+ echo "\
+$0 [OPTION]... PROGRAM [ARGUMENT]...
+
+Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
+error status if there is no known handling for PROGRAM.
+
+Options:
+ -h, --help display this help and exit
+ -v, --version output version information and exit
+ --run try to run the given command, and emulate it if it fails
+
+Supported PROGRAM values:
+ aclocal touch file \`aclocal.m4'
+ autoconf touch file \`configure'
+ autoheader touch file \`config.h.in'
+ autom4te touch the output file, or create a stub one
+ automake touch all \`Makefile.in' files
+ bison create \`y.tab.[ch]', if possible, from existing .[ch]
+ flex create \`lex.yy.c', if possible, from existing .c
+ help2man touch the output file
+ lex create \`lex.yy.c', if possible, from existing .c
+ makeinfo touch the output file
+ tar try tar, gnutar, gtar, then tar without non-portable flags
+ yacc create \`y.tab.[ch]', if possible, from existing .[ch]
+
+Version suffixes to PROGRAM as well as the prefixes \`gnu-', \`gnu', and
+\`g' are ignored when checking the name.
+
+Send bug reports to <bug-automake@gnu.org>."
+ exit $?
+ ;;
+
+ -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
+ echo "missing $scriptversion (GNU Automake)"
+ exit $?
+ ;;
+
+ -*)
+ echo 1>&2 "$0: Unknown \`$1' option"
+ echo 1>&2 "Try \`$0 --help' for more information"
+ exit 1
+ ;;
+
+esac
+
+# normalize program name to check for.
+program=`echo "$1" | sed '
+ s/^gnu-//; t
+ s/^gnu//; t
+ s/^g//; t'`
+
+# Now exit if we have it, but it failed. Also exit now if we
+# don't have it and --version was passed (most likely to detect
+# the program). This is about non-GNU programs, so use $1 not
+# $program.
+case $1 in
+ lex*|yacc*)
+ # Not GNU programs, they don't have --version.
+ ;;
+
+ tar*)
+ if test -n "$run"; then
+ echo 1>&2 "ERROR: \`tar' requires --run"
+ exit 1
+ elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
+ exit 1
+ fi
+ ;;
+
+ *)
+ if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+ # We have it, but it failed.
+ exit 1
+ elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
+ # Could not run --version or --help. This is probably someone
+ # running `$TOOL --version' or `$TOOL --help' to check whether
+ # $TOOL exists and not knowing $TOOL uses missing.
+ exit 1
+ fi
+ ;;
+esac
+
+# If it does not exist, or fails to run (possibly an outdated version),
+# try to emulate it.
+case $program in
+ aclocal*)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified \`acinclude.m4' or \`${configure_ac}'. You might want
+ to install the \`Automake' and \`Perl' packages. Grab them from
+ any GNU archive site."
+ touch aclocal.m4
+ ;;
+
+ autoconf*)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified \`${configure_ac}'. You might want to install the
+ \`Autoconf' and \`GNU m4' packages. Grab them from any GNU
+ archive site."
+ touch configure
+ ;;
+
+ autoheader*)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified \`acconfig.h' or \`${configure_ac}'. You might want
+ to install the \`Autoconf' and \`GNU m4' packages. Grab them
+ from any GNU archive site."
+ files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
+ test -z "$files" && files="config.h"
+ touch_files=
+ for f in $files; do
+ case $f in
+ *:*) touch_files="$touch_files "`echo "$f" |
+ sed -e 's/^[^:]*://' -e 's/:.*//'`;;
+ *) touch_files="$touch_files $f.in";;
+ esac
+ done
+ touch $touch_files
+ ;;
+
+ automake*)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
+ You might want to install the \`Automake' and \`Perl' packages.
+ Grab them from any GNU archive site."
+ find . -type f -name Makefile.am -print |
+ sed 's/\.am$/.in/' |
+ while read f; do touch "$f"; done
+ ;;
+
+ autom4te*)
+ echo 1>&2 "\
+WARNING: \`$1' is needed, but is $msg.
+ You might have modified some files without having the
+ proper tools for further handling them.
+ You can get \`$1' as part of \`Autoconf' from any GNU
+ archive site."
+
+ file=`echo "$*" | sed -n "$sed_output"`
+ test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
+ if test -f "$file"; then
+ touch $file
+ else
+ test -z "$file" || exec >$file
+ echo "#! /bin/sh"
+ echo "# Created by GNU Automake missing as a replacement of"
+ echo "# $ $@"
+ echo "exit 0"
+ chmod +x $file
+ exit 1
+ fi
+ ;;
+
+ bison*|yacc*)
+ echo 1>&2 "\
+WARNING: \`$1' $msg. You should only need it if
+ you modified a \`.y' file. You may need the \`Bison' package
+ in order for those modifications to take effect. You can get
+ \`Bison' from any GNU archive site."
+ rm -f y.tab.c y.tab.h
+ if test $# -ne 1; then
+ eval LASTARG="\${$#}"
+ case $LASTARG in
+ *.y)
+ SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
+ if test -f "$SRCFILE"; then
+ cp "$SRCFILE" y.tab.c
+ fi
+ SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
+ if test -f "$SRCFILE"; then
+ cp "$SRCFILE" y.tab.h
+ fi
+ ;;
+ esac
+ fi
+ if test ! -f y.tab.h; then
+ echo >y.tab.h
+ fi
+ if test ! -f y.tab.c; then
+ echo 'main() { return 0; }' >y.tab.c
+ fi
+ ;;
+
+ lex*|flex*)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified a \`.l' file. You may need the \`Flex' package
+ in order for those modifications to take effect. You can get
+ \`Flex' from any GNU archive site."
+ rm -f lex.yy.c
+ if test $# -ne 1; then
+ eval LASTARG="\${$#}"
+ case $LASTARG in
+ *.l)
+ SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
+ if test -f "$SRCFILE"; then
+ cp "$SRCFILE" lex.yy.c
+ fi
+ ;;
+ esac
+ fi
+ if test ! -f lex.yy.c; then
+ echo 'main() { return 0; }' >lex.yy.c
+ fi
+ ;;
+
+ help2man*)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified a dependency of a manual page. You may need the
+ \`Help2man' package in order for those modifications to take
+ effect. You can get \`Help2man' from any GNU archive site."
+
+ file=`echo "$*" | sed -n "$sed_output"`
+ test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
+ if test -f "$file"; then
+ touch $file
+ else
+ test -z "$file" || exec >$file
+ echo ".ab help2man is required to generate this page"
+ exit $?
+ fi
+ ;;
+
+ makeinfo*)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified a \`.texi' or \`.texinfo' file, or any other file
+ indirectly affecting the aspect of the manual. The spurious
+ call might also be the consequence of using a buggy \`make' (AIX,
+ DU, IRIX). You might want to install the \`Texinfo' package or
+ the \`GNU make' package. Grab either from any GNU archive site."
+ # The file to touch is that specified with -o ...
+ file=`echo "$*" | sed -n "$sed_output"`
+ test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
+ if test -z "$file"; then
+ # ... or it is the one specified with @setfilename ...
+ infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
+ file=`sed -n '
+ /^@setfilename/{
+ s/.* \([^ ]*\) *$/\1/
+ p
+ q
+ }' $infile`
+ # ... or it is derived from the source name (dir/f.texi becomes f.info)
+ test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
+ fi
+ # If the file does not exist, the user really needs makeinfo;
+ # let's fail without touching anything.
+ test -f $file || exit 1
+ touch $file
+ ;;
+
+ tar*)
+ shift
+
+ # We have already tried tar in the generic part.
+ # Look for gnutar/gtar before invocation to avoid ugly error
+ # messages.
+ if (gnutar --version > /dev/null 2>&1); then
+ gnutar "$@" && exit 0
+ fi
+ if (gtar --version > /dev/null 2>&1); then
+ gtar "$@" && exit 0
+ fi
+ firstarg="$1"
+ if shift; then
+ case $firstarg in
+ *o*)
+ firstarg=`echo "$firstarg" | sed s/o//`
+ tar "$firstarg" "$@" && exit 0
+ ;;
+ esac
+ case $firstarg in
+ *h*)
+ firstarg=`echo "$firstarg" | sed s/h//`
+ tar "$firstarg" "$@" && exit 0
+ ;;
+ esac
+ fi
+
+ echo 1>&2 "\
+WARNING: I can't seem to be able to run \`tar' with the given arguments.
+ You may want to install GNU tar or Free paxutils, or check the
+ command line arguments."
+ exit 1
+ ;;
+
+ *)
+ echo 1>&2 "\
+WARNING: \`$1' is needed, and is $msg.
+ You might have modified some files without having the
+ proper tools for further handling them. Check the \`README' file,
+ it often tells you about the needed prerequisites for installing
+ this package. You may also peek at any GNU archive site, in case
+ some other package would contain this missing \`$1' program."
+ exit 1
+ ;;
+esac
+
+exit 0
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
+# End:
Property changes on: nnlo-bridge/tags/nnlo-bridge-00-00-44/missing
___________________________________________________________________
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/aclocal.m4
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/aclocal.m4 (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/aclocal.m4 (revision 1772)
@@ -0,0 +1,10210 @@
+# generated automatically by aclocal 1.15 -*- Autoconf -*-
+
+# Copyright (C) 1996-2014 Free Software Foundation, Inc.
+
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+m4_ifndef([AC_CONFIG_MACRO_DIRS], [m4_defun([_AM_CONFIG_MACRO_DIRS], [])m4_defun([AC_CONFIG_MACRO_DIRS], [_AM_CONFIG_MACRO_DIRS($@)])])
+m4_ifndef([AC_AUTOCONF_VERSION],
+ [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
+m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.69],,
+[m4_warning([this file was generated for autoconf 2.69.
+You have another version of autoconf. It may work, but is not guaranteed to.
+If you have problems, you may need to regenerate the build system entirely.
+To do so, use the procedure documented by the package, typically 'autoreconf'.])])
+
+# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
+#
+# Copyright (C) 1996-2001, 2003-2015 Free Software Foundation, Inc.
+# Written by Gordon Matzigkeit, 1996
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+
+m4_define([_LT_COPYING], [dnl
+# Copyright (C) 2014 Free Software Foundation, Inc.
+# This is free software; see the source for copying conditions. There is NO
+# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+
+# GNU Libtool is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of of the License, or
+# (at your option) any later version.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program or library that is built
+# using GNU Libtool, you may include this file under the same
+# distribution terms that you use for the rest of that program.
+#
+# GNU Libtool is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+])
+
+# serial 58 LT_INIT
+
+
+# LT_PREREQ(VERSION)
+# ------------------
+# Complain and exit if this libtool version is less that VERSION.
+m4_defun([LT_PREREQ],
+[m4_if(m4_version_compare(m4_defn([LT_PACKAGE_VERSION]), [$1]), -1,
+ [m4_default([$3],
+ [m4_fatal([Libtool version $1 or higher is required],
+ 63)])],
+ [$2])])
+
+
+# _LT_CHECK_BUILDDIR
+# ------------------
+# Complain if the absolute build directory name contains unusual characters
+m4_defun([_LT_CHECK_BUILDDIR],
+[case `pwd` in
+ *\ * | *\ *)
+ AC_MSG_WARN([Libtool does not cope well with whitespace in `pwd`]) ;;
+esac
+])
+
+
+# LT_INIT([OPTIONS])
+# ------------------
+AC_DEFUN([LT_INIT],
+[AC_PREREQ([2.62])dnl We use AC_PATH_PROGS_FEATURE_CHECK
+AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl
+AC_BEFORE([$0], [LT_LANG])dnl
+AC_BEFORE([$0], [LT_OUTPUT])dnl
+AC_BEFORE([$0], [LTDL_INIT])dnl
+m4_require([_LT_CHECK_BUILDDIR])dnl
+
+dnl Autoconf doesn't catch unexpanded LT_ macros by default:
+m4_pattern_forbid([^_?LT_[A-Z_]+$])dnl
+m4_pattern_allow([^(_LT_EOF|LT_DLGLOBAL|LT_DLLAZY_OR_NOW|LT_MULTI_MODULE)$])dnl
+dnl aclocal doesn't pull ltoptions.m4, ltsugar.m4, or ltversion.m4
+dnl unless we require an AC_DEFUNed macro:
+AC_REQUIRE([LTOPTIONS_VERSION])dnl
+AC_REQUIRE([LTSUGAR_VERSION])dnl
+AC_REQUIRE([LTVERSION_VERSION])dnl
+AC_REQUIRE([LTOBSOLETE_VERSION])dnl
+m4_require([_LT_PROG_LTMAIN])dnl
+
+_LT_SHELL_INIT([SHELL=${CONFIG_SHELL-/bin/sh}])
+
+dnl Parse OPTIONS
+_LT_SET_OPTIONS([$0], [$1])
+
+# This can be used to rebuild libtool when needed
+LIBTOOL_DEPS=$ltmain
+
+# Always use our own libtool.
+LIBTOOL='$(SHELL) $(top_builddir)/libtool'
+AC_SUBST(LIBTOOL)dnl
+
+_LT_SETUP
+
+# Only expand once:
+m4_define([LT_INIT])
+])# LT_INIT
+
+# Old names:
+AU_ALIAS([AC_PROG_LIBTOOL], [LT_INIT])
+AU_ALIAS([AM_PROG_LIBTOOL], [LT_INIT])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_PROG_LIBTOOL], [])
+dnl AC_DEFUN([AM_PROG_LIBTOOL], [])
+
+
+# _LT_PREPARE_CC_BASENAME
+# -----------------------
+m4_defun([_LT_PREPARE_CC_BASENAME], [
+# Calculate cc_basename. Skip known compiler wrappers and cross-prefix.
+func_cc_basename ()
+{
+ for cc_temp in @S|@*""; do
+ case $cc_temp in
+ compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;;
+ distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;;
+ \-*) ;;
+ *) break;;
+ esac
+ done
+ func_cc_basename_result=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+}
+])# _LT_PREPARE_CC_BASENAME
+
+
+# _LT_CC_BASENAME(CC)
+# -------------------
+# It would be clearer to call AC_REQUIREs from _LT_PREPARE_CC_BASENAME,
+# but that macro is also expanded into generated libtool script, which
+# arranges for $SED and $ECHO to be set by different means.
+m4_defun([_LT_CC_BASENAME],
+[m4_require([_LT_PREPARE_CC_BASENAME])dnl
+AC_REQUIRE([_LT_DECL_SED])dnl
+AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])dnl
+func_cc_basename $1
+cc_basename=$func_cc_basename_result
+])
+
+
+# _LT_FILEUTILS_DEFAULTS
+# ----------------------
+# It is okay to use these file commands and assume they have been set
+# sensibly after 'm4_require([_LT_FILEUTILS_DEFAULTS])'.
+m4_defun([_LT_FILEUTILS_DEFAULTS],
+[: ${CP="cp -f"}
+: ${MV="mv -f"}
+: ${RM="rm -f"}
+])# _LT_FILEUTILS_DEFAULTS
+
+
+# _LT_SETUP
+# ---------
+m4_defun([_LT_SETUP],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+AC_REQUIRE([_LT_PREPARE_SED_QUOTE_VARS])dnl
+AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])dnl
+
+_LT_DECL([], [PATH_SEPARATOR], [1], [The PATH separator for the build system])dnl
+dnl
+_LT_DECL([], [host_alias], [0], [The host system])dnl
+_LT_DECL([], [host], [0])dnl
+_LT_DECL([], [host_os], [0])dnl
+dnl
+_LT_DECL([], [build_alias], [0], [The build system])dnl
+_LT_DECL([], [build], [0])dnl
+_LT_DECL([], [build_os], [0])dnl
+dnl
+AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([LT_PATH_LD])dnl
+AC_REQUIRE([LT_PATH_NM])dnl
+dnl
+AC_REQUIRE([AC_PROG_LN_S])dnl
+test -z "$LN_S" && LN_S="ln -s"
+_LT_DECL([], [LN_S], [1], [Whether we need soft or hard links])dnl
+dnl
+AC_REQUIRE([LT_CMD_MAX_LEN])dnl
+_LT_DECL([objext], [ac_objext], [0], [Object file suffix (normally "o")])dnl
+_LT_DECL([], [exeext], [0], [Executable file suffix (normally "")])dnl
+dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_CHECK_SHELL_FEATURES])dnl
+m4_require([_LT_PATH_CONVERSION_FUNCTIONS])dnl
+m4_require([_LT_CMD_RELOAD])dnl
+m4_require([_LT_CHECK_MAGIC_METHOD])dnl
+m4_require([_LT_CHECK_SHAREDLIB_FROM_LINKLIB])dnl
+m4_require([_LT_CMD_OLD_ARCHIVE])dnl
+m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
+m4_require([_LT_WITH_SYSROOT])dnl
+m4_require([_LT_CMD_TRUNCATE])dnl
+
+_LT_CONFIG_LIBTOOL_INIT([
+# See if we are running on zsh, and set the options that allow our
+# commands through without removal of \ escapes INIT.
+if test -n "\${ZSH_VERSION+set}"; then
+ setopt NO_GLOB_SUBST
+fi
+])
+if test -n "${ZSH_VERSION+set}"; then
+ setopt NO_GLOB_SUBST
+fi
+
+_LT_CHECK_OBJDIR
+
+m4_require([_LT_TAG_COMPILER])dnl
+
+case $host_os in
+aix3*)
+ # AIX sometimes has problems with the GCC collect2 program. For some
+ # reason, if we set the COLLECT_NAMES environment variable, the problems
+ # vanish in a puff of smoke.
+ if test set != "${COLLECT_NAMES+set}"; then
+ COLLECT_NAMES=
+ export COLLECT_NAMES
+ fi
+ ;;
+esac
+
+# Global variables:
+ofile=libtool
+can_build_shared=yes
+
+# All known linkers require a '.a' archive for static linking (except MSVC,
+# which needs '.lib').
+libext=a
+
+with_gnu_ld=$lt_cv_prog_gnu_ld
+
+old_CC=$CC
+old_CFLAGS=$CFLAGS
+
+# Set sane defaults for various variables
+test -z "$CC" && CC=cc
+test -z "$LTCC" && LTCC=$CC
+test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
+test -z "$LD" && LD=ld
+test -z "$ac_objext" && ac_objext=o
+
+_LT_CC_BASENAME([$compiler])
+
+# Only perform the check for file, if the check method requires it
+test -z "$MAGIC_CMD" && MAGIC_CMD=file
+case $deplibs_check_method in
+file_magic*)
+ if test "$file_magic_cmd" = '$MAGIC_CMD'; then
+ _LT_PATH_MAGIC
+ fi
+ ;;
+esac
+
+# Use C for the default configuration in the libtool script
+LT_SUPPORTED_TAG([CC])
+_LT_LANG_C_CONFIG
+_LT_LANG_DEFAULT_CONFIG
+_LT_CONFIG_COMMANDS
+])# _LT_SETUP
+
+
+# _LT_PREPARE_SED_QUOTE_VARS
+# --------------------------
+# Define a few sed substitution that help us do robust quoting.
+m4_defun([_LT_PREPARE_SED_QUOTE_VARS],
+[# Backslashify metacharacters that are still active within
+# double-quoted strings.
+sed_quote_subst='s/\([["`$\\]]\)/\\\1/g'
+
+# Same as above, but do not quote variable references.
+double_quote_subst='s/\([["`\\]]\)/\\\1/g'
+
+# Sed substitution to delay expansion of an escaped shell variable in a
+# double_quote_subst'ed string.
+delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
+
+# Sed substitution to delay expansion of an escaped single quote.
+delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
+
+# Sed substitution to avoid accidental globbing in evaled expressions
+no_glob_subst='s/\*/\\\*/g'
+])
+
+# _LT_PROG_LTMAIN
+# ---------------
+# Note that this code is called both from 'configure', and 'config.status'
+# now that we use AC_CONFIG_COMMANDS to generate libtool. Notably,
+# 'config.status' has no value for ac_aux_dir unless we are using Automake,
+# so we pass a copy along to make sure it has a sensible value anyway.
+m4_defun([_LT_PROG_LTMAIN],
+[m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([ltmain.sh])])dnl
+_LT_CONFIG_LIBTOOL_INIT([ac_aux_dir='$ac_aux_dir'])
+ltmain=$ac_aux_dir/ltmain.sh
+])# _LT_PROG_LTMAIN
+
+
+
+# So that we can recreate a full libtool script including additional
+# tags, we accumulate the chunks of code to send to AC_CONFIG_COMMANDS
+# in macros and then make a single call at the end using the 'libtool'
+# label.
+
+
+# _LT_CONFIG_LIBTOOL_INIT([INIT-COMMANDS])
+# ----------------------------------------
+# Register INIT-COMMANDS to be passed to AC_CONFIG_COMMANDS later.
+m4_define([_LT_CONFIG_LIBTOOL_INIT],
+[m4_ifval([$1],
+ [m4_append([_LT_OUTPUT_LIBTOOL_INIT],
+ [$1
+])])])
+
+# Initialize.
+m4_define([_LT_OUTPUT_LIBTOOL_INIT])
+
+
+# _LT_CONFIG_LIBTOOL([COMMANDS])
+# ------------------------------
+# Register COMMANDS to be passed to AC_CONFIG_COMMANDS later.
+m4_define([_LT_CONFIG_LIBTOOL],
+[m4_ifval([$1],
+ [m4_append([_LT_OUTPUT_LIBTOOL_COMMANDS],
+ [$1
+])])])
+
+# Initialize.
+m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS])
+
+
+# _LT_CONFIG_SAVE_COMMANDS([COMMANDS], [INIT_COMMANDS])
+# -----------------------------------------------------
+m4_defun([_LT_CONFIG_SAVE_COMMANDS],
+[_LT_CONFIG_LIBTOOL([$1])
+_LT_CONFIG_LIBTOOL_INIT([$2])
+])
+
+
+# _LT_FORMAT_COMMENT([COMMENT])
+# -----------------------------
+# Add leading comment marks to the start of each line, and a trailing
+# full-stop to the whole comment if one is not present already.
+m4_define([_LT_FORMAT_COMMENT],
+[m4_ifval([$1], [
+m4_bpatsubst([m4_bpatsubst([$1], [^ *], [# ])],
+ [['`$\]], [\\\&])]m4_bmatch([$1], [[!?.]$], [], [.])
+)])
+
+
+
+
+
+# _LT_DECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION], [IS-TAGGED?])
+# -------------------------------------------------------------------
+# CONFIGNAME is the name given to the value in the libtool script.
+# VARNAME is the (base) name used in the configure script.
+# VALUE may be 0, 1 or 2 for a computed quote escaped value based on
+# VARNAME. Any other value will be used directly.
+m4_define([_LT_DECL],
+[lt_if_append_uniq([lt_decl_varnames], [$2], [, ],
+ [lt_dict_add_subkey([lt_decl_dict], [$2], [libtool_name],
+ [m4_ifval([$1], [$1], [$2])])
+ lt_dict_add_subkey([lt_decl_dict], [$2], [value], [$3])
+ m4_ifval([$4],
+ [lt_dict_add_subkey([lt_decl_dict], [$2], [description], [$4])])
+ lt_dict_add_subkey([lt_decl_dict], [$2],
+ [tagged?], [m4_ifval([$5], [yes], [no])])])
+])
+
+
+# _LT_TAGDECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION])
+# --------------------------------------------------------
+m4_define([_LT_TAGDECL], [_LT_DECL([$1], [$2], [$3], [$4], [yes])])
+
+
+# lt_decl_tag_varnames([SEPARATOR], [VARNAME1...])
+# ------------------------------------------------
+m4_define([lt_decl_tag_varnames],
+[_lt_decl_filter([tagged?], [yes], $@)])
+
+
+# _lt_decl_filter(SUBKEY, VALUE, [SEPARATOR], [VARNAME1..])
+# ---------------------------------------------------------
+m4_define([_lt_decl_filter],
+[m4_case([$#],
+ [0], [m4_fatal([$0: too few arguments: $#])],
+ [1], [m4_fatal([$0: too few arguments: $#: $1])],
+ [2], [lt_dict_filter([lt_decl_dict], [$1], [$2], [], lt_decl_varnames)],
+ [3], [lt_dict_filter([lt_decl_dict], [$1], [$2], [$3], lt_decl_varnames)],
+ [lt_dict_filter([lt_decl_dict], $@)])[]dnl
+])
+
+
+# lt_decl_quote_varnames([SEPARATOR], [VARNAME1...])
+# --------------------------------------------------
+m4_define([lt_decl_quote_varnames],
+[_lt_decl_filter([value], [1], $@)])
+
+
+# lt_decl_dquote_varnames([SEPARATOR], [VARNAME1...])
+# ---------------------------------------------------
+m4_define([lt_decl_dquote_varnames],
+[_lt_decl_filter([value], [2], $@)])
+
+
+# lt_decl_varnames_tagged([SEPARATOR], [VARNAME1...])
+# ---------------------------------------------------
+m4_define([lt_decl_varnames_tagged],
+[m4_assert([$# <= 2])dnl
+_$0(m4_quote(m4_default([$1], [[, ]])),
+ m4_ifval([$2], [[$2]], [m4_dquote(lt_decl_tag_varnames)]),
+ m4_split(m4_normalize(m4_quote(_LT_TAGS)), [ ]))])
+m4_define([_lt_decl_varnames_tagged],
+[m4_ifval([$3], [lt_combine([$1], [$2], [_], $3)])])
+
+
+# lt_decl_all_varnames([SEPARATOR], [VARNAME1...])
+# ------------------------------------------------
+m4_define([lt_decl_all_varnames],
+[_$0(m4_quote(m4_default([$1], [[, ]])),
+ m4_if([$2], [],
+ m4_quote(lt_decl_varnames),
+ m4_quote(m4_shift($@))))[]dnl
+])
+m4_define([_lt_decl_all_varnames],
+[lt_join($@, lt_decl_varnames_tagged([$1],
+ lt_decl_tag_varnames([[, ]], m4_shift($@))))dnl
+])
+
+
+# _LT_CONFIG_STATUS_DECLARE([VARNAME])
+# ------------------------------------
+# Quote a variable value, and forward it to 'config.status' so that its
+# declaration there will have the same value as in 'configure'. VARNAME
+# must have a single quote delimited value for this to work.
+m4_define([_LT_CONFIG_STATUS_DECLARE],
+[$1='`$ECHO "$][$1" | $SED "$delay_single_quote_subst"`'])
+
+
+# _LT_CONFIG_STATUS_DECLARATIONS
+# ------------------------------
+# We delimit libtool config variables with single quotes, so when
+# we write them to config.status, we have to be sure to quote all
+# embedded single quotes properly. In configure, this macro expands
+# each variable declared with _LT_DECL (and _LT_TAGDECL) into:
+#
+# <var>='`$ECHO "$<var>" | $SED "$delay_single_quote_subst"`'
+m4_defun([_LT_CONFIG_STATUS_DECLARATIONS],
+[m4_foreach([_lt_var], m4_quote(lt_decl_all_varnames),
+ [m4_n([_LT_CONFIG_STATUS_DECLARE(_lt_var)])])])
+
+
+# _LT_LIBTOOL_TAGS
+# ----------------
+# Output comment and list of tags supported by the script
+m4_defun([_LT_LIBTOOL_TAGS],
+[_LT_FORMAT_COMMENT([The names of the tagged configurations supported by this script])dnl
+available_tags='_LT_TAGS'dnl
+])
+
+
+# _LT_LIBTOOL_DECLARE(VARNAME, [TAG])
+# -----------------------------------
+# Extract the dictionary values for VARNAME (optionally with TAG) and
+# expand to a commented shell variable setting:
+#
+# # Some comment about what VAR is for.
+# visible_name=$lt_internal_name
+m4_define([_LT_LIBTOOL_DECLARE],
+[_LT_FORMAT_COMMENT(m4_quote(lt_dict_fetch([lt_decl_dict], [$1],
+ [description])))[]dnl
+m4_pushdef([_libtool_name],
+ m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [libtool_name])))[]dnl
+m4_case(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [value])),
+ [0], [_libtool_name=[$]$1],
+ [1], [_libtool_name=$lt_[]$1],
+ [2], [_libtool_name=$lt_[]$1],
+ [_libtool_name=lt_dict_fetch([lt_decl_dict], [$1], [value])])[]dnl
+m4_ifval([$2], [_$2])[]m4_popdef([_libtool_name])[]dnl
+])
+
+
+# _LT_LIBTOOL_CONFIG_VARS
+# -----------------------
+# Produce commented declarations of non-tagged libtool config variables
+# suitable for insertion in the LIBTOOL CONFIG section of the 'libtool'
+# script. Tagged libtool config variables (even for the LIBTOOL CONFIG
+# section) are produced by _LT_LIBTOOL_TAG_VARS.
+m4_defun([_LT_LIBTOOL_CONFIG_VARS],
+[m4_foreach([_lt_var],
+ m4_quote(_lt_decl_filter([tagged?], [no], [], lt_decl_varnames)),
+ [m4_n([_LT_LIBTOOL_DECLARE(_lt_var)])])])
+
+
+# _LT_LIBTOOL_TAG_VARS(TAG)
+# -------------------------
+m4_define([_LT_LIBTOOL_TAG_VARS],
+[m4_foreach([_lt_var], m4_quote(lt_decl_tag_varnames),
+ [m4_n([_LT_LIBTOOL_DECLARE(_lt_var, [$1])])])])
+
+
+# _LT_TAGVAR(VARNAME, [TAGNAME])
+# ------------------------------
+m4_define([_LT_TAGVAR], [m4_ifval([$2], [$1_$2], [$1])])
+
+
+# _LT_CONFIG_COMMANDS
+# -------------------
+# Send accumulated output to $CONFIG_STATUS. Thanks to the lists of
+# variables for single and double quote escaping we saved from calls
+# to _LT_DECL, we can put quote escaped variables declarations
+# into 'config.status', and then the shell code to quote escape them in
+# for loops in 'config.status'. Finally, any additional code accumulated
+# from calls to _LT_CONFIG_LIBTOOL_INIT is expanded.
+m4_defun([_LT_CONFIG_COMMANDS],
+[AC_PROVIDE_IFELSE([LT_OUTPUT],
+ dnl If the libtool generation code has been placed in $CONFIG_LT,
+ dnl instead of duplicating it all over again into config.status,
+ dnl then we will have config.status run $CONFIG_LT later, so it
+ dnl needs to know what name is stored there:
+ [AC_CONFIG_COMMANDS([libtool],
+ [$SHELL $CONFIG_LT || AS_EXIT(1)], [CONFIG_LT='$CONFIG_LT'])],
+ dnl If the libtool generation code is destined for config.status,
+ dnl expand the accumulated commands and init code now:
+ [AC_CONFIG_COMMANDS([libtool],
+ [_LT_OUTPUT_LIBTOOL_COMMANDS], [_LT_OUTPUT_LIBTOOL_COMMANDS_INIT])])
+])#_LT_CONFIG_COMMANDS
+
+
+# Initialize.
+m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS_INIT],
+[
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+sed_quote_subst='$sed_quote_subst'
+double_quote_subst='$double_quote_subst'
+delay_variable_subst='$delay_variable_subst'
+_LT_CONFIG_STATUS_DECLARATIONS
+LTCC='$LTCC'
+LTCFLAGS='$LTCFLAGS'
+compiler='$compiler_DEFAULT'
+
+# A function that is used when there is no print builtin or printf.
+func_fallback_echo ()
+{
+ eval 'cat <<_LTECHO_EOF
+\$[]1
+_LTECHO_EOF'
+}
+
+# Quote evaled strings.
+for var in lt_decl_all_varnames([[ \
+]], lt_decl_quote_varnames); do
+ case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
+ *[[\\\\\\\`\\"\\\$]]*)
+ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes
+ ;;
+ *)
+ eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+ ;;
+ esac
+done
+
+# Double-quote double-evaled strings.
+for var in lt_decl_all_varnames([[ \
+]], lt_decl_dquote_varnames); do
+ case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
+ *[[\\\\\\\`\\"\\\$]]*)
+ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes
+ ;;
+ *)
+ eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+ ;;
+ esac
+done
+
+_LT_OUTPUT_LIBTOOL_INIT
+])
+
+# _LT_GENERATED_FILE_INIT(FILE, [COMMENT])
+# ------------------------------------
+# Generate a child script FILE with all initialization necessary to
+# reuse the environment learned by the parent script, and make the
+# file executable. If COMMENT is supplied, it is inserted after the
+# '#!' sequence but before initialization text begins. After this
+# macro, additional text can be appended to FILE to form the body of
+# the child script. The macro ends with non-zero status if the
+# file could not be fully written (such as if the disk is full).
+m4_ifdef([AS_INIT_GENERATED],
+[m4_defun([_LT_GENERATED_FILE_INIT],[AS_INIT_GENERATED($@)])],
+[m4_defun([_LT_GENERATED_FILE_INIT],
+[m4_require([AS_PREPARE])]dnl
+[m4_pushdef([AS_MESSAGE_LOG_FD])]dnl
+[lt_write_fail=0
+cat >$1 <<_ASEOF || lt_write_fail=1
+#! $SHELL
+# Generated by $as_me.
+$2
+SHELL=\${CONFIG_SHELL-$SHELL}
+export SHELL
+_ASEOF
+cat >>$1 <<\_ASEOF || lt_write_fail=1
+AS_SHELL_SANITIZE
+_AS_PREPARE
+exec AS_MESSAGE_FD>&1
+_ASEOF
+test 0 = "$lt_write_fail" && chmod +x $1[]dnl
+m4_popdef([AS_MESSAGE_LOG_FD])])])# _LT_GENERATED_FILE_INIT
+
+# LT_OUTPUT
+# ---------
+# This macro allows early generation of the libtool script (before
+# AC_OUTPUT is called), incase it is used in configure for compilation
+# tests.
+AC_DEFUN([LT_OUTPUT],
+[: ${CONFIG_LT=./config.lt}
+AC_MSG_NOTICE([creating $CONFIG_LT])
+_LT_GENERATED_FILE_INIT(["$CONFIG_LT"],
+[# Run this file to recreate a libtool stub with the current configuration.])
+
+cat >>"$CONFIG_LT" <<\_LTEOF
+lt_cl_silent=false
+exec AS_MESSAGE_LOG_FD>>config.log
+{
+ echo
+ AS_BOX([Running $as_me.])
+} >&AS_MESSAGE_LOG_FD
+
+lt_cl_help="\
+'$as_me' creates a local libtool stub from the current configuration,
+for use in further configure time tests before the real libtool is
+generated.
+
+Usage: $[0] [[OPTIONS]]
+
+ -h, --help print this help, then exit
+ -V, --version print version number, then exit
+ -q, --quiet do not print progress messages
+ -d, --debug don't remove temporary files
+
+Report bugs to <bug-libtool@gnu.org>."
+
+lt_cl_version="\
+m4_ifset([AC_PACKAGE_NAME], [AC_PACKAGE_NAME ])config.lt[]dnl
+m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION])
+configured by $[0], generated by m4_PACKAGE_STRING.
+
+Copyright (C) 2011 Free Software Foundation, Inc.
+This config.lt script is free software; the Free Software Foundation
+gives unlimited permision to copy, distribute and modify it."
+
+while test 0 != $[#]
+do
+ case $[1] in
+ --version | --v* | -V )
+ echo "$lt_cl_version"; exit 0 ;;
+ --help | --h* | -h )
+ echo "$lt_cl_help"; exit 0 ;;
+ --debug | --d* | -d )
+ debug=: ;;
+ --quiet | --q* | --silent | --s* | -q )
+ lt_cl_silent=: ;;
+
+ -*) AC_MSG_ERROR([unrecognized option: $[1]
+Try '$[0] --help' for more information.]) ;;
+
+ *) AC_MSG_ERROR([unrecognized argument: $[1]
+Try '$[0] --help' for more information.]) ;;
+ esac
+ shift
+done
+
+if $lt_cl_silent; then
+ exec AS_MESSAGE_FD>/dev/null
+fi
+_LTEOF
+
+cat >>"$CONFIG_LT" <<_LTEOF
+_LT_OUTPUT_LIBTOOL_COMMANDS_INIT
+_LTEOF
+
+cat >>"$CONFIG_LT" <<\_LTEOF
+AC_MSG_NOTICE([creating $ofile])
+_LT_OUTPUT_LIBTOOL_COMMANDS
+AS_EXIT(0)
+_LTEOF
+chmod +x "$CONFIG_LT"
+
+# configure is writing to config.log, but config.lt does its own redirection,
+# appending to config.log, which fails on DOS, as config.log is still kept
+# open by configure. Here we exec the FD to /dev/null, effectively closing
+# config.log, so it can be properly (re)opened and appended to by config.lt.
+lt_cl_success=:
+test yes = "$silent" &&
+ lt_config_lt_args="$lt_config_lt_args --quiet"
+exec AS_MESSAGE_LOG_FD>/dev/null
+$SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false
+exec AS_MESSAGE_LOG_FD>>config.log
+$lt_cl_success || AS_EXIT(1)
+])# LT_OUTPUT
+
+
+# _LT_CONFIG(TAG)
+# ---------------
+# If TAG is the built-in tag, create an initial libtool script with a
+# default configuration from the untagged config vars. Otherwise add code
+# to config.status for appending the configuration named by TAG from the
+# matching tagged config vars.
+m4_defun([_LT_CONFIG],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+_LT_CONFIG_SAVE_COMMANDS([
+ m4_define([_LT_TAG], m4_if([$1], [], [C], [$1]))dnl
+ m4_if(_LT_TAG, [C], [
+ # See if we are running on zsh, and set the options that allow our
+ # commands through without removal of \ escapes.
+ if test -n "${ZSH_VERSION+set}"; then
+ setopt NO_GLOB_SUBST
+ fi
+
+ cfgfile=${ofile}T
+ trap "$RM \"$cfgfile\"; exit 1" 1 2 15
+ $RM "$cfgfile"
+
+ cat <<_LT_EOF >> "$cfgfile"
+#! $SHELL
+# Generated automatically by $as_me ($PACKAGE) $VERSION
+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+# NOTE: Changes made to this file will be lost: look at ltmain.sh.
+
+# Provide generalized library-building support services.
+# Written by Gordon Matzigkeit, 1996
+
+_LT_COPYING
+_LT_LIBTOOL_TAGS
+
+# Configured defaults for sys_lib_dlsearch_path munging.
+: \${LT_SYS_LIBRARY_PATH="$configure_time_lt_sys_library_path"}
+
+# ### BEGIN LIBTOOL CONFIG
+_LT_LIBTOOL_CONFIG_VARS
+_LT_LIBTOOL_TAG_VARS
+# ### END LIBTOOL CONFIG
+
+_LT_EOF
+
+ cat <<'_LT_EOF' >> "$cfgfile"
+
+# ### BEGIN FUNCTIONS SHARED WITH CONFIGURE
+
+_LT_PREPARE_MUNGE_PATH_LIST
+_LT_PREPARE_CC_BASENAME
+
+# ### END FUNCTIONS SHARED WITH CONFIGURE
+
+_LT_EOF
+
+ case $host_os in
+ aix3*)
+ cat <<\_LT_EOF >> "$cfgfile"
+# AIX sometimes has problems with the GCC collect2 program. For some
+# reason, if we set the COLLECT_NAMES environment variable, the problems
+# vanish in a puff of smoke.
+if test set != "${COLLECT_NAMES+set}"; then
+ COLLECT_NAMES=
+ export COLLECT_NAMES
+fi
+_LT_EOF
+ ;;
+ esac
+
+ _LT_PROG_LTMAIN
+
+ # We use sed instead of cat because bash on DJGPP gets confused if
+ # if finds mixed CR/LF and LF-only lines. Since sed operates in
+ # text mode, it properly converts lines to CR/LF. This bash problem
+ # is reportedly fixed, but why not run on old versions too?
+ sed '$q' "$ltmain" >> "$cfgfile" \
+ || (rm -f "$cfgfile"; exit 1)
+
+ mv -f "$cfgfile" "$ofile" ||
+ (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
+ chmod +x "$ofile"
+],
+[cat <<_LT_EOF >> "$ofile"
+
+dnl Unfortunately we have to use $1 here, since _LT_TAG is not expanded
+dnl in a comment (ie after a #).
+# ### BEGIN LIBTOOL TAG CONFIG: $1
+_LT_LIBTOOL_TAG_VARS(_LT_TAG)
+# ### END LIBTOOL TAG CONFIG: $1
+_LT_EOF
+])dnl /m4_if
+],
+[m4_if([$1], [], [
+ PACKAGE='$PACKAGE'
+ VERSION='$VERSION'
+ RM='$RM'
+ ofile='$ofile'], [])
+])dnl /_LT_CONFIG_SAVE_COMMANDS
+])# _LT_CONFIG
+
+
+# LT_SUPPORTED_TAG(TAG)
+# ---------------------
+# Trace this macro to discover what tags are supported by the libtool
+# --tag option, using:
+# autoconf --trace 'LT_SUPPORTED_TAG:$1'
+AC_DEFUN([LT_SUPPORTED_TAG], [])
+
+
+# C support is built-in for now
+m4_define([_LT_LANG_C_enabled], [])
+m4_define([_LT_TAGS], [])
+
+
+# LT_LANG(LANG)
+# -------------
+# Enable libtool support for the given language if not already enabled.
+AC_DEFUN([LT_LANG],
+[AC_BEFORE([$0], [LT_OUTPUT])dnl
+m4_case([$1],
+ [C], [_LT_LANG(C)],
+ [C++], [_LT_LANG(CXX)],
+ [Go], [_LT_LANG(GO)],
+ [Java], [_LT_LANG(GCJ)],
+ [Fortran 77], [_LT_LANG(F77)],
+ [Fortran], [_LT_LANG(FC)],
+ [Windows Resource], [_LT_LANG(RC)],
+ [m4_ifdef([_LT_LANG_]$1[_CONFIG],
+ [_LT_LANG($1)],
+ [m4_fatal([$0: unsupported language: "$1"])])])dnl
+])# LT_LANG
+
+
+# _LT_LANG(LANGNAME)
+# ------------------
+m4_defun([_LT_LANG],
+[m4_ifdef([_LT_LANG_]$1[_enabled], [],
+ [LT_SUPPORTED_TAG([$1])dnl
+ m4_append([_LT_TAGS], [$1 ])dnl
+ m4_define([_LT_LANG_]$1[_enabled], [])dnl
+ _LT_LANG_$1_CONFIG($1)])dnl
+])# _LT_LANG
+
+
+m4_ifndef([AC_PROG_GO], [
+# NOTE: This macro has been submitted for inclusion into #
+# GNU Autoconf as AC_PROG_GO. When it is available in #
+# a released version of Autoconf we should remove this #
+# macro and use it instead. #
+m4_defun([AC_PROG_GO],
+[AC_LANG_PUSH(Go)dnl
+AC_ARG_VAR([GOC], [Go compiler command])dnl
+AC_ARG_VAR([GOFLAGS], [Go compiler flags])dnl
+_AC_ARG_VAR_LDFLAGS()dnl
+AC_CHECK_TOOL(GOC, gccgo)
+if test -z "$GOC"; then
+ if test -n "$ac_tool_prefix"; then
+ AC_CHECK_PROG(GOC, [${ac_tool_prefix}gccgo], [${ac_tool_prefix}gccgo])
+ fi
+fi
+if test -z "$GOC"; then
+ AC_CHECK_PROG(GOC, gccgo, gccgo, false)
+fi
+])#m4_defun
+])#m4_ifndef
+
+
+# _LT_LANG_DEFAULT_CONFIG
+# -----------------------
+m4_defun([_LT_LANG_DEFAULT_CONFIG],
+[AC_PROVIDE_IFELSE([AC_PROG_CXX],
+ [LT_LANG(CXX)],
+ [m4_define([AC_PROG_CXX], defn([AC_PROG_CXX])[LT_LANG(CXX)])])
+
+AC_PROVIDE_IFELSE([AC_PROG_F77],
+ [LT_LANG(F77)],
+ [m4_define([AC_PROG_F77], defn([AC_PROG_F77])[LT_LANG(F77)])])
+
+AC_PROVIDE_IFELSE([AC_PROG_FC],
+ [LT_LANG(FC)],
+ [m4_define([AC_PROG_FC], defn([AC_PROG_FC])[LT_LANG(FC)])])
+
+dnl The call to [A][M_PROG_GCJ] is quoted like that to stop aclocal
+dnl pulling things in needlessly.
+AC_PROVIDE_IFELSE([AC_PROG_GCJ],
+ [LT_LANG(GCJ)],
+ [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
+ [LT_LANG(GCJ)],
+ [AC_PROVIDE_IFELSE([LT_PROG_GCJ],
+ [LT_LANG(GCJ)],
+ [m4_ifdef([AC_PROG_GCJ],
+ [m4_define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[LT_LANG(GCJ)])])
+ m4_ifdef([A][M_PROG_GCJ],
+ [m4_define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[LT_LANG(GCJ)])])
+ m4_ifdef([LT_PROG_GCJ],
+ [m4_define([LT_PROG_GCJ], defn([LT_PROG_GCJ])[LT_LANG(GCJ)])])])])])
+
+AC_PROVIDE_IFELSE([AC_PROG_GO],
+ [LT_LANG(GO)],
+ [m4_define([AC_PROG_GO], defn([AC_PROG_GO])[LT_LANG(GO)])])
+
+AC_PROVIDE_IFELSE([LT_PROG_RC],
+ [LT_LANG(RC)],
+ [m4_define([LT_PROG_RC], defn([LT_PROG_RC])[LT_LANG(RC)])])
+])# _LT_LANG_DEFAULT_CONFIG
+
+# Obsolete macros:
+AU_DEFUN([AC_LIBTOOL_CXX], [LT_LANG(C++)])
+AU_DEFUN([AC_LIBTOOL_F77], [LT_LANG(Fortran 77)])
+AU_DEFUN([AC_LIBTOOL_FC], [LT_LANG(Fortran)])
+AU_DEFUN([AC_LIBTOOL_GCJ], [LT_LANG(Java)])
+AU_DEFUN([AC_LIBTOOL_RC], [LT_LANG(Windows Resource)])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_CXX], [])
+dnl AC_DEFUN([AC_LIBTOOL_F77], [])
+dnl AC_DEFUN([AC_LIBTOOL_FC], [])
+dnl AC_DEFUN([AC_LIBTOOL_GCJ], [])
+dnl AC_DEFUN([AC_LIBTOOL_RC], [])
+
+
+# _LT_TAG_COMPILER
+# ----------------
+m4_defun([_LT_TAG_COMPILER],
+[AC_REQUIRE([AC_PROG_CC])dnl
+
+_LT_DECL([LTCC], [CC], [1], [A C compiler])dnl
+_LT_DECL([LTCFLAGS], [CFLAGS], [1], [LTCC compiler flags])dnl
+_LT_TAGDECL([CC], [compiler], [1], [A language specific compiler])dnl
+_LT_TAGDECL([with_gcc], [GCC], [0], [Is the compiler the GNU compiler?])dnl
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+])# _LT_TAG_COMPILER
+
+
+# _LT_COMPILER_BOILERPLATE
+# ------------------------
+# Check for compiler boilerplate output or warnings with
+# the simple compiler test code.
+m4_defun([_LT_COMPILER_BOILERPLATE],
+[m4_require([_LT_DECL_SED])dnl
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_compile_test_code" >conftest.$ac_ext
+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_compiler_boilerplate=`cat conftest.err`
+$RM conftest*
+])# _LT_COMPILER_BOILERPLATE
+
+
+# _LT_LINKER_BOILERPLATE
+# ----------------------
+# Check for linker boilerplate output or warnings with
+# the simple link test code.
+m4_defun([_LT_LINKER_BOILERPLATE],
+[m4_require([_LT_DECL_SED])dnl
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_link_test_code" >conftest.$ac_ext
+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_linker_boilerplate=`cat conftest.err`
+$RM -r conftest*
+])# _LT_LINKER_BOILERPLATE
+
+# _LT_REQUIRED_DARWIN_CHECKS
+# -------------------------
+m4_defun_once([_LT_REQUIRED_DARWIN_CHECKS],[
+ case $host_os in
+ rhapsody* | darwin*)
+ AC_CHECK_TOOL([DSYMUTIL], [dsymutil], [:])
+ AC_CHECK_TOOL([NMEDIT], [nmedit], [:])
+ AC_CHECK_TOOL([LIPO], [lipo], [:])
+ AC_CHECK_TOOL([OTOOL], [otool], [:])
+ AC_CHECK_TOOL([OTOOL64], [otool64], [:])
+ _LT_DECL([], [DSYMUTIL], [1],
+ [Tool to manipulate archived DWARF debug symbol files on Mac OS X])
+ _LT_DECL([], [NMEDIT], [1],
+ [Tool to change global to local symbols on Mac OS X])
+ _LT_DECL([], [LIPO], [1],
+ [Tool to manipulate fat objects and archives on Mac OS X])
+ _LT_DECL([], [OTOOL], [1],
+ [ldd/readelf like tool for Mach-O binaries on Mac OS X])
+ _LT_DECL([], [OTOOL64], [1],
+ [ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4])
+
+ AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod],
+ [lt_cv_apple_cc_single_mod=no
+ if test -z "$LT_MULTI_MODULE"; then
+ # By default we will add the -single_module flag. You can override
+ # by either setting the environment variable LT_MULTI_MODULE
+ # non-empty at configure time, or by adding -multi_module to the
+ # link flags.
+ rm -rf libconftest.dylib*
+ echo "int foo(void){return 1;}" > conftest.c
+ echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+-dynamiclib -Wl,-single_module conftest.c" >&AS_MESSAGE_LOG_FD
+ $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+ -dynamiclib -Wl,-single_module conftest.c 2>conftest.err
+ _lt_result=$?
+ # If there is a non-empty error log, and "single_module"
+ # appears in it, assume the flag caused a linker warning
+ if test -s conftest.err && $GREP single_module conftest.err; then
+ cat conftest.err >&AS_MESSAGE_LOG_FD
+ # Otherwise, if the output was created with a 0 exit code from
+ # the compiler, it worked.
+ elif test -f libconftest.dylib && test 0 = "$_lt_result"; then
+ lt_cv_apple_cc_single_mod=yes
+ else
+ cat conftest.err >&AS_MESSAGE_LOG_FD
+ fi
+ rm -rf libconftest.dylib*
+ rm -f conftest.*
+ fi])
+
+ AC_CACHE_CHECK([for -exported_symbols_list linker flag],
+ [lt_cv_ld_exported_symbols_list],
+ [lt_cv_ld_exported_symbols_list=no
+ save_LDFLAGS=$LDFLAGS
+ echo "_main" > conftest.sym
+ LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
+ AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
+ [lt_cv_ld_exported_symbols_list=yes],
+ [lt_cv_ld_exported_symbols_list=no])
+ LDFLAGS=$save_LDFLAGS
+ ])
+
+ AC_CACHE_CHECK([for -force_load linker flag],[lt_cv_ld_force_load],
+ [lt_cv_ld_force_load=no
+ cat > conftest.c << _LT_EOF
+int forced_loaded() { return 2;}
+_LT_EOF
+ echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&AS_MESSAGE_LOG_FD
+ $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&AS_MESSAGE_LOG_FD
+ echo "$AR cru libconftest.a conftest.o" >&AS_MESSAGE_LOG_FD
+ $AR cru libconftest.a conftest.o 2>&AS_MESSAGE_LOG_FD
+ echo "$RANLIB libconftest.a" >&AS_MESSAGE_LOG_FD
+ $RANLIB libconftest.a 2>&AS_MESSAGE_LOG_FD
+ cat > conftest.c << _LT_EOF
+int main() { return 0;}
+_LT_EOF
+ echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&AS_MESSAGE_LOG_FD
+ $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err
+ _lt_result=$?
+ if test -s conftest.err && $GREP force_load conftest.err; then
+ cat conftest.err >&AS_MESSAGE_LOG_FD
+ elif test -f conftest && test 0 = "$_lt_result" && $GREP forced_load conftest >/dev/null 2>&1; then
+ lt_cv_ld_force_load=yes
+ else
+ cat conftest.err >&AS_MESSAGE_LOG_FD
+ fi
+ rm -f conftest.err libconftest.a conftest conftest.c
+ rm -rf conftest.dSYM
+ ])
+ case $host_os in
+ rhapsody* | darwin1.[[012]])
+ _lt_dar_allow_undefined='$wl-undefined ${wl}suppress' ;;
+ darwin1.*)
+ _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;;
+ darwin*) # darwin 5.x on
+ # if running on 10.5 or later, the deployment target defaults
+ # to the OS version, if on x86, and 10.4, the deployment
+ # target defaults to 10.4. Don't you love it?
+ case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
+ 10.0,*86*-darwin8*|10.0,*-darwin[[91]]*)
+ _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;;
+ 10.[[012]][[,.]]*)
+ _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;;
+ 10.*)
+ _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;;
+ esac
+ ;;
+ esac
+ if test yes = "$lt_cv_apple_cc_single_mod"; then
+ _lt_dar_single_mod='$single_module'
+ fi
+ if test yes = "$lt_cv_ld_exported_symbols_list"; then
+ _lt_dar_export_syms=' $wl-exported_symbols_list,$output_objdir/$libname-symbols.expsym'
+ else
+ _lt_dar_export_syms='~$NMEDIT -s $output_objdir/$libname-symbols.expsym $lib'
+ fi
+ if test : != "$DSYMUTIL" && test no = "$lt_cv_ld_force_load"; then
+ _lt_dsymutil='~$DSYMUTIL $lib || :'
+ else
+ _lt_dsymutil=
+ fi
+ ;;
+ esac
+])
+
+
+# _LT_DARWIN_LINKER_FEATURES([TAG])
+# ---------------------------------
+# Checks for linker and compiler features on darwin
+m4_defun([_LT_DARWIN_LINKER_FEATURES],
+[
+ m4_require([_LT_REQUIRED_DARWIN_CHECKS])
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+ _LT_TAGVAR(hardcode_direct, $1)=no
+ _LT_TAGVAR(hardcode_automatic, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+ if test yes = "$lt_cv_ld_force_load"; then
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience $wl-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
+ m4_case([$1], [F77], [_LT_TAGVAR(compiler_needs_object, $1)=yes],
+ [FC], [_LT_TAGVAR(compiler_needs_object, $1)=yes])
+ else
+ _LT_TAGVAR(whole_archive_flag_spec, $1)=''
+ fi
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ _LT_TAGVAR(allow_undefined_flag, $1)=$_lt_dar_allow_undefined
+ case $cc_basename in
+ ifort*|nagfor*) _lt_dar_can_shared=yes ;;
+ *) _lt_dar_can_shared=$GCC ;;
+ esac
+ if test yes = "$_lt_dar_can_shared"; then
+ output_verbose_link_cmd=func_echo_all
+ _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dsymutil"
+ _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dsymutil"
+ _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dar_export_syms$_lt_dsymutil"
+ _LT_TAGVAR(module_expsym_cmds, $1)="sed -e 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dar_export_syms$_lt_dsymutil"
+ m4_if([$1], [CXX],
+[ if test yes != "$lt_cv_apple_cc_single_mod"; then
+ _LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \$lib-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$lib-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring$_lt_dsymutil"
+ _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \$lib-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$lib-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring$_lt_dar_export_syms$_lt_dsymutil"
+ fi
+],[])
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+])
+
+# _LT_SYS_MODULE_PATH_AIX([TAGNAME])
+# ----------------------------------
+# Links a minimal program and checks the executable
+# for the system default hardcoded library path. In most cases,
+# this is /usr/lib:/lib, but when the MPI compilers are used
+# the location of the communication and MPI libs are included too.
+# If we don't find anything, use the default library path according
+# to the aix ld manual.
+# Store the results from the different compilers for each TAGNAME.
+# Allow to override them for all tags through lt_cv_aix_libpath.
+m4_defun([_LT_SYS_MODULE_PATH_AIX],
+[m4_require([_LT_DECL_SED])dnl
+if test set = "${lt_cv_aix_libpath+set}"; then
+ aix_libpath=$lt_cv_aix_libpath
+else
+ AC_CACHE_VAL([_LT_TAGVAR([lt_cv_aix_libpath_], [$1])],
+ [AC_LINK_IFELSE([AC_LANG_PROGRAM],[
+ lt_aix_libpath_sed='[
+ /Import File Strings/,/^$/ {
+ /^0/ {
+ s/^0 *\([^ ]*\) *$/\1/
+ p
+ }
+ }]'
+ _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+ # Check for a 64-bit object if we didn't find anything.
+ if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then
+ _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+ fi],[])
+ if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then
+ _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=/usr/lib:/lib
+ fi
+ ])
+ aix_libpath=$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])
+fi
+])# _LT_SYS_MODULE_PATH_AIX
+
+
+# _LT_SHELL_INIT(ARG)
+# -------------------
+m4_define([_LT_SHELL_INIT],
+[m4_divert_text([M4SH-INIT], [$1
+])])# _LT_SHELL_INIT
+
+
+
+# _LT_PROG_ECHO_BACKSLASH
+# -----------------------
+# Find how we can fake an echo command that does not interpret backslash.
+# In particular, with Autoconf 2.60 or later we add some code to the start
+# of the generated configure script that will find a shell with a builtin
+# printf (that we can use as an echo command).
+m4_defun([_LT_PROG_ECHO_BACKSLASH],
+[ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
+ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
+
+AC_MSG_CHECKING([how to print strings])
+# Test print first, because it will be a builtin if present.
+if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \
+ test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then
+ ECHO='print -r --'
+elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then
+ ECHO='printf %s\n'
+else
+ # Use this function as a fallback that always works.
+ func_fallback_echo ()
+ {
+ eval 'cat <<_LTECHO_EOF
+$[]1
+_LTECHO_EOF'
+ }
+ ECHO='func_fallback_echo'
+fi
+
+# func_echo_all arg...
+# Invoke $ECHO with all args, space-separated.
+func_echo_all ()
+{
+ $ECHO "$*"
+}
+
+case $ECHO in
+ printf*) AC_MSG_RESULT([printf]) ;;
+ print*) AC_MSG_RESULT([print -r]) ;;
+ *) AC_MSG_RESULT([cat]) ;;
+esac
+
+m4_ifdef([_AS_DETECT_SUGGESTED],
+[_AS_DETECT_SUGGESTED([
+ test -n "${ZSH_VERSION+set}${BASH_VERSION+set}" || (
+ ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+ ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
+ ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
+ PATH=/empty FPATH=/empty; export PATH FPATH
+ test "X`printf %s $ECHO`" = "X$ECHO" \
+ || test "X`print -r -- $ECHO`" = "X$ECHO" )])])
+
+_LT_DECL([], [SHELL], [1], [Shell to use when invoking shell scripts])
+_LT_DECL([], [ECHO], [1], [An echo program that protects backslashes])
+])# _LT_PROG_ECHO_BACKSLASH
+
+
+# _LT_WITH_SYSROOT
+# ----------------
+AC_DEFUN([_LT_WITH_SYSROOT],
+[AC_MSG_CHECKING([for sysroot])
+AC_ARG_WITH([sysroot],
+[AS_HELP_STRING([--with-sysroot@<:@=DIR@:>@],
+ [Search for dependent libraries within DIR (or the compiler's sysroot
+ if not specified).])],
+[], [with_sysroot=no])
+
+dnl lt_sysroot will always be passed unquoted. We quote it here
+dnl in case the user passed a directory name.
+lt_sysroot=
+case $with_sysroot in #(
+ yes)
+ if test yes = "$GCC"; then
+ lt_sysroot=`$CC --print-sysroot 2>/dev/null`
+ fi
+ ;; #(
+ /*)
+ lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"`
+ ;; #(
+ no|'')
+ ;; #(
+ *)
+ AC_MSG_RESULT([$with_sysroot])
+ AC_MSG_ERROR([The sysroot must be an absolute path.])
+ ;;
+esac
+
+ AC_MSG_RESULT([${lt_sysroot:-no}])
+_LT_DECL([], [lt_sysroot], [0], [The root where to search for ]dnl
+[dependent libraries, and where our libraries should be installed.])])
+
+# _LT_ENABLE_LOCK
+# ---------------
+m4_defun([_LT_ENABLE_LOCK],
+[AC_ARG_ENABLE([libtool-lock],
+ [AS_HELP_STRING([--disable-libtool-lock],
+ [avoid locking (might break parallel builds)])])
+test no = "$enable_libtool_lock" || enable_libtool_lock=yes
+
+# Some flags need to be propagated to the compiler or linker for good
+# libtool support.
+case $host in
+ia64-*-hpux*)
+ # Find out what ABI is being produced by ac_compile, and set mode
+ # options accordingly.
+ echo 'int i;' > conftest.$ac_ext
+ if AC_TRY_EVAL(ac_compile); then
+ case `/usr/bin/file conftest.$ac_objext` in
+ *ELF-32*)
+ HPUX_IA64_MODE=32
+ ;;
+ *ELF-64*)
+ HPUX_IA64_MODE=64
+ ;;
+ esac
+ fi
+ rm -rf conftest*
+ ;;
+*-*-irix6*)
+ # Find out what ABI is being produced by ac_compile, and set linker
+ # options accordingly.
+ echo '[#]line '$LINENO' "configure"' > conftest.$ac_ext
+ if AC_TRY_EVAL(ac_compile); then
+ if test yes = "$lt_cv_prog_gnu_ld"; then
+ case `/usr/bin/file conftest.$ac_objext` in
+ *32-bit*)
+ LD="${LD-ld} -melf32bsmip"
+ ;;
+ *N32*)
+ LD="${LD-ld} -melf32bmipn32"
+ ;;
+ *64-bit*)
+ LD="${LD-ld} -melf64bmip"
+ ;;
+ esac
+ else
+ case `/usr/bin/file conftest.$ac_objext` in
+ *32-bit*)
+ LD="${LD-ld} -32"
+ ;;
+ *N32*)
+ LD="${LD-ld} -n32"
+ ;;
+ *64-bit*)
+ LD="${LD-ld} -64"
+ ;;
+ esac
+ fi
+ fi
+ rm -rf conftest*
+ ;;
+
+mips64*-*linux*)
+ # Find out what ABI is being produced by ac_compile, and set linker
+ # options accordingly.
+ echo '[#]line '$LINENO' "configure"' > conftest.$ac_ext
+ if AC_TRY_EVAL(ac_compile); then
+ emul=elf
+ case `/usr/bin/file conftest.$ac_objext` in
+ *32-bit*)
+ emul="${emul}32"
+ ;;
+ *64-bit*)
+ emul="${emul}64"
+ ;;
+ esac
+ case `/usr/bin/file conftest.$ac_objext` in
+ *MSB*)
+ emul="${emul}btsmip"
+ ;;
+ *LSB*)
+ emul="${emul}ltsmip"
+ ;;
+ esac
+ case `/usr/bin/file conftest.$ac_objext` in
+ *N32*)
+ emul="${emul}n32"
+ ;;
+ esac
+ LD="${LD-ld} -m $emul"
+ fi
+ rm -rf conftest*
+ ;;
+
+x86_64-*kfreebsd*-gnu|x86_64-*linux*|powerpc*-*linux*| \
+s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
+ # Find out what ABI is being produced by ac_compile, and set linker
+ # options accordingly. Note that the listed cases only cover the
+ # situations where additional linker options are needed (such as when
+ # doing 32-bit compilation for a host where ld defaults to 64-bit, or
+ # vice versa); the common cases where no linker options are needed do
+ # not appear in the list.
+ echo 'int i;' > conftest.$ac_ext
+ if AC_TRY_EVAL(ac_compile); then
+ case `/usr/bin/file conftest.o` in
+ *32-bit*)
+ case $host in
+ x86_64-*kfreebsd*-gnu)
+ LD="${LD-ld} -m elf_i386_fbsd"
+ ;;
+ x86_64-*linux*)
+ case `/usr/bin/file conftest.o` in
+ *x86-64*)
+ LD="${LD-ld} -m elf32_x86_64"
+ ;;
+ *)
+ LD="${LD-ld} -m elf_i386"
+ ;;
+ esac
+ ;;
+ powerpc64le-*linux*)
+ LD="${LD-ld} -m elf32lppclinux"
+ ;;
+ powerpc64-*linux*)
+ LD="${LD-ld} -m elf32ppclinux"
+ ;;
+ s390x-*linux*)
+ LD="${LD-ld} -m elf_s390"
+ ;;
+ sparc64-*linux*)
+ LD="${LD-ld} -m elf32_sparc"
+ ;;
+ esac
+ ;;
+ *64-bit*)
+ case $host in
+ x86_64-*kfreebsd*-gnu)
+ LD="${LD-ld} -m elf_x86_64_fbsd"
+ ;;
+ x86_64-*linux*)
+ LD="${LD-ld} -m elf_x86_64"
+ ;;
+ powerpcle-*linux*)
+ LD="${LD-ld} -m elf64lppc"
+ ;;
+ powerpc-*linux*)
+ LD="${LD-ld} -m elf64ppc"
+ ;;
+ s390*-*linux*|s390*-*tpf*)
+ LD="${LD-ld} -m elf64_s390"
+ ;;
+ sparc*-*linux*)
+ LD="${LD-ld} -m elf64_sparc"
+ ;;
+ esac
+ ;;
+ esac
+ fi
+ rm -rf conftest*
+ ;;
+
+*-*-sco3.2v5*)
+ # On SCO OpenServer 5, we need -belf to get full-featured binaries.
+ SAVE_CFLAGS=$CFLAGS
+ CFLAGS="$CFLAGS -belf"
+ AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
+ [AC_LANG_PUSH(C)
+ AC_LINK_IFELSE([AC_LANG_PROGRAM([[]],[[]])],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
+ AC_LANG_POP])
+ if test yes != "$lt_cv_cc_needs_belf"; then
+ # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
+ CFLAGS=$SAVE_CFLAGS
+ fi
+ ;;
+*-*solaris*)
+ # Find out what ABI is being produced by ac_compile, and set linker
+ # options accordingly.
+ echo 'int i;' > conftest.$ac_ext
+ if AC_TRY_EVAL(ac_compile); then
+ case `/usr/bin/file conftest.o` in
+ *64-bit*)
+ case $lt_cv_prog_gnu_ld in
+ yes*)
+ case $host in
+ i?86-*-solaris*|x86_64-*-solaris*)
+ LD="${LD-ld} -m elf_x86_64"
+ ;;
+ sparc*-*-solaris*)
+ LD="${LD-ld} -m elf64_sparc"
+ ;;
+ esac
+ # GNU ld 2.21 introduced _sol2 emulations. Use them if available.
+ if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then
+ LD=${LD-ld}_sol2
+ fi
+ ;;
+ *)
+ if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
+ LD="${LD-ld} -64"
+ fi
+ ;;
+ esac
+ ;;
+ esac
+ fi
+ rm -rf conftest*
+ ;;
+esac
+
+need_locks=$enable_libtool_lock
+])# _LT_ENABLE_LOCK
+
+
+# _LT_PROG_AR
+# -----------
+m4_defun([_LT_PROG_AR],
+[AC_CHECK_TOOLS(AR, [ar], false)
+: ${AR=ar}
+: ${AR_FLAGS=cru}
+_LT_DECL([], [AR], [1], [The archiver])
+_LT_DECL([], [AR_FLAGS], [1], [Flags to create an archive])
+
+AC_CACHE_CHECK([for archiver @FILE support], [lt_cv_ar_at_file],
+ [lt_cv_ar_at_file=no
+ AC_COMPILE_IFELSE([AC_LANG_PROGRAM],
+ [echo conftest.$ac_objext > conftest.lst
+ lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&AS_MESSAGE_LOG_FD'
+ AC_TRY_EVAL([lt_ar_try])
+ if test 0 -eq "$ac_status"; then
+ # Ensure the archiver fails upon bogus file names.
+ rm -f conftest.$ac_objext libconftest.a
+ AC_TRY_EVAL([lt_ar_try])
+ if test 0 -ne "$ac_status"; then
+ lt_cv_ar_at_file=@
+ fi
+ fi
+ rm -f conftest.* libconftest.a
+ ])
+ ])
+
+if test no = "$lt_cv_ar_at_file"; then
+ archiver_list_spec=
+else
+ archiver_list_spec=$lt_cv_ar_at_file
+fi
+_LT_DECL([], [archiver_list_spec], [1],
+ [How to feed a file listing to the archiver])
+])# _LT_PROG_AR
+
+
+# _LT_CMD_OLD_ARCHIVE
+# -------------------
+m4_defun([_LT_CMD_OLD_ARCHIVE],
+[_LT_PROG_AR
+
+AC_CHECK_TOOL(STRIP, strip, :)
+test -z "$STRIP" && STRIP=:
+_LT_DECL([], [STRIP], [1], [A symbol stripping program])
+
+AC_CHECK_TOOL(RANLIB, ranlib, :)
+test -z "$RANLIB" && RANLIB=:
+_LT_DECL([], [RANLIB], [1],
+ [Commands used to install an old-style archive])
+
+# Determine commands to create old-style static archives.
+old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
+old_postinstall_cmds='chmod 644 $oldlib'
+old_postuninstall_cmds=
+
+if test -n "$RANLIB"; then
+ case $host_os in
+ bitrig* | openbsd*)
+ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib"
+ ;;
+ *)
+ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$tool_oldlib"
+ ;;
+ esac
+ old_archive_cmds="$old_archive_cmds~\$RANLIB \$tool_oldlib"
+fi
+
+case $host_os in
+ darwin*)
+ lock_old_archive_extraction=yes ;;
+ *)
+ lock_old_archive_extraction=no ;;
+esac
+_LT_DECL([], [old_postinstall_cmds], [2])
+_LT_DECL([], [old_postuninstall_cmds], [2])
+_LT_TAGDECL([], [old_archive_cmds], [2],
+ [Commands used to build an old-style archive])
+_LT_DECL([], [lock_old_archive_extraction], [0],
+ [Whether to use a lock for old archive extraction])
+])# _LT_CMD_OLD_ARCHIVE
+
+
+# _LT_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
+# [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE])
+# ----------------------------------------------------------------
+# Check whether the given compiler option works
+AC_DEFUN([_LT_COMPILER_OPTION],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_SED])dnl
+AC_CACHE_CHECK([$1], [$2],
+ [$2=no
+ m4_if([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4])
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+ lt_compiler_flag="$3" ## exclude from sc_useless_quotes_in_assignment
+ # Insert the option either (1) after the last *FLAGS variable, or
+ # (2) before a word containing "conftest.", or (3) at the end.
+ # Note that $ac_compile itself does not contain backslashes and begins
+ # with a dollar sign (not a hyphen), so the echo should work correctly.
+ # The option is referenced via a variable to avoid confusing sed.
+ lt_compile=`echo "$ac_compile" | $SED \
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+ -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
+ -e 's:$: $lt_compiler_flag:'`
+ (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
+ (eval "$lt_compile" 2>conftest.err)
+ ac_status=$?
+ cat conftest.err >&AS_MESSAGE_LOG_FD
+ echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
+ if (exit $ac_status) && test -s "$ac_outfile"; then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings other than the usual output.
+ $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+ $2=yes
+ fi
+ fi
+ $RM conftest*
+])
+
+if test yes = "[$]$2"; then
+ m4_if([$5], , :, [$5])
+else
+ m4_if([$6], , :, [$6])
+fi
+])# _LT_COMPILER_OPTION
+
+# Old name:
+AU_ALIAS([AC_LIBTOOL_COMPILER_OPTION], [_LT_COMPILER_OPTION])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], [])
+
+
+# _LT_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
+# [ACTION-SUCCESS], [ACTION-FAILURE])
+# ----------------------------------------------------
+# Check whether the given linker option works
+AC_DEFUN([_LT_LINKER_OPTION],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_SED])dnl
+AC_CACHE_CHECK([$1], [$2],
+ [$2=no
+ save_LDFLAGS=$LDFLAGS
+ LDFLAGS="$LDFLAGS $3"
+ echo "$lt_simple_link_test_code" > conftest.$ac_ext
+ if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+ # The linker can only warn and ignore the option if not recognized
+ # So say no if there are warnings
+ if test -s conftest.err; then
+ # Append any errors to the config.log.
+ cat conftest.err 1>&AS_MESSAGE_LOG_FD
+ $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+ if diff conftest.exp conftest.er2 >/dev/null; then
+ $2=yes
+ fi
+ else
+ $2=yes
+ fi
+ fi
+ $RM -r conftest*
+ LDFLAGS=$save_LDFLAGS
+])
+
+if test yes = "[$]$2"; then
+ m4_if([$4], , :, [$4])
+else
+ m4_if([$5], , :, [$5])
+fi
+])# _LT_LINKER_OPTION
+
+# Old name:
+AU_ALIAS([AC_LIBTOOL_LINKER_OPTION], [_LT_LINKER_OPTION])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], [])
+
+
+# LT_CMD_MAX_LEN
+#---------------
+AC_DEFUN([LT_CMD_MAX_LEN],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+# find the maximum length of command line arguments
+AC_MSG_CHECKING([the maximum length of command line arguments])
+AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
+ i=0
+ teststring=ABCD
+
+ case $build_os in
+ msdosdjgpp*)
+ # On DJGPP, this test can blow up pretty badly due to problems in libc
+ # (any single argument exceeding 2000 bytes causes a buffer overrun
+ # during glob expansion). Even if it were fixed, the result of this
+ # check would be larger than it should be.
+ lt_cv_sys_max_cmd_len=12288; # 12K is about right
+ ;;
+
+ gnu*)
+ # Under GNU Hurd, this test is not required because there is
+ # no limit to the length of command line arguments.
+ # Libtool will interpret -1 as no limit whatsoever
+ lt_cv_sys_max_cmd_len=-1;
+ ;;
+
+ cygwin* | mingw* | cegcc*)
+ # On Win9x/ME, this test blows up -- it succeeds, but takes
+ # about 5 minutes as the teststring grows exponentially.
+ # Worse, since 9x/ME are not pre-emptively multitasking,
+ # you end up with a "frozen" computer, even though with patience
+ # the test eventually succeeds (with a max line length of 256k).
+ # Instead, let's just punt: use the minimum linelength reported by
+ # all of the supported platforms: 8192 (on NT/2K/XP).
+ lt_cv_sys_max_cmd_len=8192;
+ ;;
+
+ mint*)
+ # On MiNT this can take a long time and run out of memory.
+ lt_cv_sys_max_cmd_len=8192;
+ ;;
+
+ amigaos*)
+ # On AmigaOS with pdksh, this test takes hours, literally.
+ # So we just punt and use a minimum line length of 8192.
+ lt_cv_sys_max_cmd_len=8192;
+ ;;
+
+ bitrig* | darwin* | dragonfly* | freebsd* | netbsd* | openbsd*)
+ # This has been around since 386BSD, at least. Likely further.
+ if test -x /sbin/sysctl; then
+ lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
+ elif test -x /usr/sbin/sysctl; then
+ lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
+ else
+ lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs
+ fi
+ # And add a safety zone
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+ ;;
+
+ interix*)
+ # We know the value 262144 and hardcode it with a safety zone (like BSD)
+ lt_cv_sys_max_cmd_len=196608
+ ;;
+
+ os2*)
+ # The test takes a long time on OS/2.
+ lt_cv_sys_max_cmd_len=8192
+ ;;
+
+ osf*)
+ # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
+ # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
+ # nice to cause kernel panics so lets avoid the loop below.
+ # First set a reasonable default.
+ lt_cv_sys_max_cmd_len=16384
+ #
+ if test -x /sbin/sysconfig; then
+ case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
+ *1*) lt_cv_sys_max_cmd_len=-1 ;;
+ esac
+ fi
+ ;;
+ sco3.2v5*)
+ lt_cv_sys_max_cmd_len=102400
+ ;;
+ sysv5* | sco5v6* | sysv4.2uw2*)
+ kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
+ if test -n "$kargmax"; then
+ lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ ]]//'`
+ else
+ lt_cv_sys_max_cmd_len=32768
+ fi
+ ;;
+ *)
+ lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
+ if test -n "$lt_cv_sys_max_cmd_len" && \
+ test undefined != "$lt_cv_sys_max_cmd_len"; then
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+ else
+ # Make teststring a little bigger before we do anything with it.
+ # a 1K string should be a reasonable start.
+ for i in 1 2 3 4 5 6 7 8; do
+ teststring=$teststring$teststring
+ done
+ SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
+ # If test is not a shell built-in, we'll probably end up computing a
+ # maximum length that is only half of the actual maximum length, but
+ # we can't tell.
+ while { test X`env echo "$teststring$teststring" 2>/dev/null` \
+ = "X$teststring$teststring"; } >/dev/null 2>&1 &&
+ test 17 != "$i" # 1/2 MB should be enough
+ do
+ i=`expr $i + 1`
+ teststring=$teststring$teststring
+ done
+ # Only check the string length outside the loop.
+ lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1`
+ teststring=
+ # Add a significant safety factor because C++ compilers can tack on
+ # massive amounts of additional arguments before passing them to the
+ # linker. It appears as though 1/2 is a usable value.
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
+ fi
+ ;;
+ esac
+])
+if test -n "$lt_cv_sys_max_cmd_len"; then
+ AC_MSG_RESULT($lt_cv_sys_max_cmd_len)
+else
+ AC_MSG_RESULT(none)
+fi
+max_cmd_len=$lt_cv_sys_max_cmd_len
+_LT_DECL([], [max_cmd_len], [0],
+ [What is the maximum length of a command?])
+])# LT_CMD_MAX_LEN
+
+# Old name:
+AU_ALIAS([AC_LIBTOOL_SYS_MAX_CMD_LEN], [LT_CMD_MAX_LEN])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], [])
+
+
+# _LT_HEADER_DLFCN
+# ----------------
+m4_defun([_LT_HEADER_DLFCN],
+[AC_CHECK_HEADERS([dlfcn.h], [], [], [AC_INCLUDES_DEFAULT])dnl
+])# _LT_HEADER_DLFCN
+
+
+# _LT_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
+# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
+# ----------------------------------------------------------------
+m4_defun([_LT_TRY_DLOPEN_SELF],
+[m4_require([_LT_HEADER_DLFCN])dnl
+if test yes = "$cross_compiling"; then :
+ [$4]
+else
+ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+ lt_status=$lt_dlunknown
+ cat > conftest.$ac_ext <<_LT_EOF
+[#line $LINENO "configure"
+#include "confdefs.h"
+
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
+
+#include <stdio.h>
+
+#ifdef RTLD_GLOBAL
+# define LT_DLGLOBAL RTLD_GLOBAL
+#else
+# ifdef DL_GLOBAL
+# define LT_DLGLOBAL DL_GLOBAL
+# else
+# define LT_DLGLOBAL 0
+# endif
+#endif
+
+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
+ find out it does not work in some platform. */
+#ifndef LT_DLLAZY_OR_NOW
+# ifdef RTLD_LAZY
+# define LT_DLLAZY_OR_NOW RTLD_LAZY
+# else
+# ifdef DL_LAZY
+# define LT_DLLAZY_OR_NOW DL_LAZY
+# else
+# ifdef RTLD_NOW
+# define LT_DLLAZY_OR_NOW RTLD_NOW
+# else
+# ifdef DL_NOW
+# define LT_DLLAZY_OR_NOW DL_NOW
+# else
+# define LT_DLLAZY_OR_NOW 0
+# endif
+# endif
+# endif
+# endif
+#endif
+
+/* When -fvisibility=hidden is used, assume the code has been annotated
+ correspondingly for the symbols needed. */
+#if defined __GNUC__ && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+int fnord () __attribute__((visibility("default")));
+#endif
+
+int fnord () { return 42; }
+int main ()
+{
+ void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+ int status = $lt_dlunknown;
+
+ if (self)
+ {
+ if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
+ else
+ {
+ if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
+ else puts (dlerror ());
+ }
+ /* dlclose (self); */
+ }
+ else
+ puts (dlerror ());
+
+ return status;
+}]
+_LT_EOF
+ if AC_TRY_EVAL(ac_link) && test -s "conftest$ac_exeext" 2>/dev/null; then
+ (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null
+ lt_status=$?
+ case x$lt_status in
+ x$lt_dlno_uscore) $1 ;;
+ x$lt_dlneed_uscore) $2 ;;
+ x$lt_dlunknown|x*) $3 ;;
+ esac
+ else :
+ # compilation failed
+ $3
+ fi
+fi
+rm -fr conftest*
+])# _LT_TRY_DLOPEN_SELF
+
+
+# LT_SYS_DLOPEN_SELF
+# ------------------
+AC_DEFUN([LT_SYS_DLOPEN_SELF],
+[m4_require([_LT_HEADER_DLFCN])dnl
+if test yes != "$enable_dlopen"; then
+ enable_dlopen=unknown
+ enable_dlopen_self=unknown
+ enable_dlopen_self_static=unknown
+else
+ lt_cv_dlopen=no
+ lt_cv_dlopen_libs=
+
+ case $host_os in
+ beos*)
+ lt_cv_dlopen=load_add_on
+ lt_cv_dlopen_libs=
+ lt_cv_dlopen_self=yes
+ ;;
+
+ mingw* | pw32* | cegcc*)
+ lt_cv_dlopen=LoadLibrary
+ lt_cv_dlopen_libs=
+ ;;
+
+ cygwin*)
+ lt_cv_dlopen=dlopen
+ lt_cv_dlopen_libs=
+ ;;
+
+ darwin*)
+ # if libdl is installed we need to link against it
+ AC_CHECK_LIB([dl], [dlopen],
+ [lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl],[
+ lt_cv_dlopen=dyld
+ lt_cv_dlopen_libs=
+ lt_cv_dlopen_self=yes
+ ])
+ ;;
+
+ tpf*)
+ # Don't try to run any link tests for TPF. We know it's impossible
+ # because TPF is a cross-compiler, and we know how we open DSOs.
+ lt_cv_dlopen=dlopen
+ lt_cv_dlopen_libs=
+ lt_cv_dlopen_self=no
+ ;;
+
+ *)
+ AC_CHECK_FUNC([shl_load],
+ [lt_cv_dlopen=shl_load],
+ [AC_CHECK_LIB([dld], [shl_load],
+ [lt_cv_dlopen=shl_load lt_cv_dlopen_libs=-ldld],
+ [AC_CHECK_FUNC([dlopen],
+ [lt_cv_dlopen=dlopen],
+ [AC_CHECK_LIB([dl], [dlopen],
+ [lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl],
+ [AC_CHECK_LIB([svld], [dlopen],
+ [lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-lsvld],
+ [AC_CHECK_LIB([dld], [dld_link],
+ [lt_cv_dlopen=dld_link lt_cv_dlopen_libs=-ldld])
+ ])
+ ])
+ ])
+ ])
+ ])
+ ;;
+ esac
+
+ if test no = "$lt_cv_dlopen"; then
+ enable_dlopen=no
+ else
+ enable_dlopen=yes
+ fi
+
+ case $lt_cv_dlopen in
+ dlopen)
+ save_CPPFLAGS=$CPPFLAGS
+ test yes = "$ac_cv_header_dlfcn_h" && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
+
+ save_LDFLAGS=$LDFLAGS
+ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
+
+ save_LIBS=$LIBS
+ LIBS="$lt_cv_dlopen_libs $LIBS"
+
+ AC_CACHE_CHECK([whether a program can dlopen itself],
+ lt_cv_dlopen_self, [dnl
+ _LT_TRY_DLOPEN_SELF(
+ lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes,
+ lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross)
+ ])
+
+ if test yes = "$lt_cv_dlopen_self"; then
+ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
+ AC_CACHE_CHECK([whether a statically linked program can dlopen itself],
+ lt_cv_dlopen_self_static, [dnl
+ _LT_TRY_DLOPEN_SELF(
+ lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes,
+ lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross)
+ ])
+ fi
+
+ CPPFLAGS=$save_CPPFLAGS
+ LDFLAGS=$save_LDFLAGS
+ LIBS=$save_LIBS
+ ;;
+ esac
+
+ case $lt_cv_dlopen_self in
+ yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
+ *) enable_dlopen_self=unknown ;;
+ esac
+
+ case $lt_cv_dlopen_self_static in
+ yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
+ *) enable_dlopen_self_static=unknown ;;
+ esac
+fi
+_LT_DECL([dlopen_support], [enable_dlopen], [0],
+ [Whether dlopen is supported])
+_LT_DECL([dlopen_self], [enable_dlopen_self], [0],
+ [Whether dlopen of programs is supported])
+_LT_DECL([dlopen_self_static], [enable_dlopen_self_static], [0],
+ [Whether dlopen of statically linked programs is supported])
+])# LT_SYS_DLOPEN_SELF
+
+# Old name:
+AU_ALIAS([AC_LIBTOOL_DLOPEN_SELF], [LT_SYS_DLOPEN_SELF])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], [])
+
+
+# _LT_COMPILER_C_O([TAGNAME])
+# ---------------------------
+# Check to see if options -c and -o are simultaneously supported by compiler.
+# This macro does not hard code the compiler like AC_PROG_CC_C_O.
+m4_defun([_LT_COMPILER_C_O],
+[m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_TAG_COMPILER])dnl
+AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext],
+ [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)],
+ [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no
+ $RM -r conftest 2>/dev/null
+ mkdir conftest
+ cd conftest
+ mkdir out
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+ lt_compiler_flag="-o out/conftest2.$ac_objext"
+ # Insert the option either (1) after the last *FLAGS variable, or
+ # (2) before a word containing "conftest.", or (3) at the end.
+ # Note that $ac_compile itself does not contain backslashes and begins
+ # with a dollar sign (not a hyphen), so the echo should work correctly.
+ lt_compile=`echo "$ac_compile" | $SED \
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+ -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
+ -e 's:$: $lt_compiler_flag:'`
+ (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
+ (eval "$lt_compile" 2>out/conftest.err)
+ ac_status=$?
+ cat out/conftest.err >&AS_MESSAGE_LOG_FD
+ echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
+ if (exit $ac_status) && test -s out/conftest2.$ac_objext
+ then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings
+ $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
+ $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+ if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+ _LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
+ fi
+ fi
+ chmod u+w . 2>&AS_MESSAGE_LOG_FD
+ $RM conftest*
+ # SGI C++ compiler will create directory out/ii_files/ for
+ # template instantiation
+ test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+ $RM out/* && rmdir out
+ cd ..
+ $RM -r conftest
+ $RM conftest*
+])
+_LT_TAGDECL([compiler_c_o], [lt_cv_prog_compiler_c_o], [1],
+ [Does compiler simultaneously support -c and -o options?])
+])# _LT_COMPILER_C_O
+
+
+# _LT_COMPILER_FILE_LOCKS([TAGNAME])
+# ----------------------------------
+# Check to see if we can do hard links to lock some files if needed
+m4_defun([_LT_COMPILER_FILE_LOCKS],
+[m4_require([_LT_ENABLE_LOCK])dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+_LT_COMPILER_C_O([$1])
+
+hard_links=nottested
+if test no = "$_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)" && test no != "$need_locks"; then
+ # do not overwrite the value of need_locks provided by the user
+ AC_MSG_CHECKING([if we can lock with hard links])
+ hard_links=yes
+ $RM conftest*
+ ln conftest.a conftest.b 2>/dev/null && hard_links=no
+ touch conftest.a
+ ln conftest.a conftest.b 2>&5 || hard_links=no
+ ln conftest.a conftest.b 2>/dev/null && hard_links=no
+ AC_MSG_RESULT([$hard_links])
+ if test no = "$hard_links"; then
+ AC_MSG_WARN(['$CC' does not support '-c -o', so 'make -j' may be unsafe])
+ need_locks=warn
+ fi
+else
+ need_locks=no
+fi
+_LT_DECL([], [need_locks], [1], [Must we lock files when doing compilation?])
+])# _LT_COMPILER_FILE_LOCKS
+
+
+# _LT_CHECK_OBJDIR
+# ----------------
+m4_defun([_LT_CHECK_OBJDIR],
+[AC_CACHE_CHECK([for objdir], [lt_cv_objdir],
+[rm -f .libs 2>/dev/null
+mkdir .libs 2>/dev/null
+if test -d .libs; then
+ lt_cv_objdir=.libs
+else
+ # MS-DOS does not allow filenames that begin with a dot.
+ lt_cv_objdir=_libs
+fi
+rmdir .libs 2>/dev/null])
+objdir=$lt_cv_objdir
+_LT_DECL([], [objdir], [0],
+ [The name of the directory that contains temporary libtool files])dnl
+m4_pattern_allow([LT_OBJDIR])dnl
+AC_DEFINE_UNQUOTED([LT_OBJDIR], "$lt_cv_objdir/",
+ [Define to the sub-directory where libtool stores uninstalled libraries.])
+])# _LT_CHECK_OBJDIR
+
+
+# _LT_LINKER_HARDCODE_LIBPATH([TAGNAME])
+# --------------------------------------
+# Check hardcoding attributes.
+m4_defun([_LT_LINKER_HARDCODE_LIBPATH],
+[AC_MSG_CHECKING([how to hardcode library paths into programs])
+_LT_TAGVAR(hardcode_action, $1)=
+if test -n "$_LT_TAGVAR(hardcode_libdir_flag_spec, $1)" ||
+ test -n "$_LT_TAGVAR(runpath_var, $1)" ||
+ test yes = "$_LT_TAGVAR(hardcode_automatic, $1)"; then
+
+ # We can hardcode non-existent directories.
+ if test no != "$_LT_TAGVAR(hardcode_direct, $1)" &&
+ # If the only mechanism to avoid hardcoding is shlibpath_var, we
+ # have to relink, otherwise we might link with an installed library
+ # when we should be linking with a yet-to-be-installed one
+ ## test no != "$_LT_TAGVAR(hardcode_shlibpath_var, $1)" &&
+ test no != "$_LT_TAGVAR(hardcode_minus_L, $1)"; then
+ # Linking always hardcodes the temporary library directory.
+ _LT_TAGVAR(hardcode_action, $1)=relink
+ else
+ # We can link without hardcoding, and we can hardcode nonexisting dirs.
+ _LT_TAGVAR(hardcode_action, $1)=immediate
+ fi
+else
+ # We cannot hardcode anything, or else we can only hardcode existing
+ # directories.
+ _LT_TAGVAR(hardcode_action, $1)=unsupported
+fi
+AC_MSG_RESULT([$_LT_TAGVAR(hardcode_action, $1)])
+
+if test relink = "$_LT_TAGVAR(hardcode_action, $1)" ||
+ test yes = "$_LT_TAGVAR(inherit_rpath, $1)"; then
+ # Fast installation is not supported
+ enable_fast_install=no
+elif test yes = "$shlibpath_overrides_runpath" ||
+ test no = "$enable_shared"; then
+ # Fast installation is not necessary
+ enable_fast_install=needless
+fi
+_LT_TAGDECL([], [hardcode_action], [0],
+ [How to hardcode a shared library path into an executable])
+])# _LT_LINKER_HARDCODE_LIBPATH
+
+
+# _LT_CMD_STRIPLIB
+# ----------------
+m4_defun([_LT_CMD_STRIPLIB],
+[m4_require([_LT_DECL_EGREP])
+striplib=
+old_striplib=
+AC_MSG_CHECKING([whether stripping libraries is possible])
+if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then
+ test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
+ test -z "$striplib" && striplib="$STRIP --strip-unneeded"
+ AC_MSG_RESULT([yes])
+else
+# FIXME - insert some real tests, host_os isn't really good enough
+ case $host_os in
+ darwin*)
+ if test -n "$STRIP"; then
+ striplib="$STRIP -x"
+ old_striplib="$STRIP -S"
+ AC_MSG_RESULT([yes])
+ else
+ AC_MSG_RESULT([no])
+ fi
+ ;;
+ *)
+ AC_MSG_RESULT([no])
+ ;;
+ esac
+fi
+_LT_DECL([], [old_striplib], [1], [Commands to strip libraries])
+_LT_DECL([], [striplib], [1])
+])# _LT_CMD_STRIPLIB
+
+
+# _LT_PREPARE_MUNGE_PATH_LIST
+# ---------------------------
+# Make sure func_munge_path_list() is defined correctly.
+m4_defun([_LT_PREPARE_MUNGE_PATH_LIST],
+[[# func_munge_path_list VARIABLE PATH
+# -----------------------------------
+# VARIABLE is name of variable containing _space_ separated list of
+# directories to be munged by the contents of PATH, which is string
+# having a format:
+# "DIR[:DIR]:"
+# string "DIR[ DIR]" will be prepended to VARIABLE
+# ":DIR[:DIR]"
+# string "DIR[ DIR]" will be appended to VARIABLE
+# "DIRP[:DIRP]::[DIRA:]DIRA"
+# string "DIRP[ DIRP]" will be prepended to VARIABLE and string
+# "DIRA[ DIRA]" will be appended to VARIABLE
+# "DIR[:DIR]"
+# VARIABLE will be replaced by "DIR[ DIR]"
+func_munge_path_list ()
+{
+ case x@S|@2 in
+ x)
+ ;;
+ *:)
+ eval @S|@1=\"`$ECHO @S|@2 | $SED 's/:/ /g'` \@S|@@S|@1\"
+ ;;
+ x:*)
+ eval @S|@1=\"\@S|@@S|@1 `$ECHO @S|@2 | $SED 's/:/ /g'`\"
+ ;;
+ *::*)
+ eval @S|@1=\"\@S|@@S|@1\ `$ECHO @S|@2 | $SED -e 's/.*:://' -e 's/:/ /g'`\"
+ eval @S|@1=\"`$ECHO @S|@2 | $SED -e 's/::.*//' -e 's/:/ /g'`\ \@S|@@S|@1\"
+ ;;
+ *)
+ eval @S|@1=\"`$ECHO @S|@2 | $SED 's/:/ /g'`\"
+ ;;
+ esac
+}
+]])# _LT_PREPARE_PATH_LIST
+
+
+# _LT_SYS_DYNAMIC_LINKER([TAG])
+# -----------------------------
+# PORTME Fill in your ld.so characteristics
+m4_defun([_LT_SYS_DYNAMIC_LINKER],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+m4_require([_LT_DECL_EGREP])dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_OBJDUMP])dnl
+m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_CHECK_SHELL_FEATURES])dnl
+m4_require([_LT_PREPARE_MUNGE_PATH_LIST])dnl
+AC_MSG_CHECKING([dynamic linker characteristics])
+m4_if([$1],
+ [], [
+if test yes = "$GCC"; then
+ case $host_os in
+ darwin*) lt_awk_arg='/^libraries:/,/LR/' ;;
+ *) lt_awk_arg='/^libraries:/' ;;
+ esac
+ case $host_os in
+ mingw* | cegcc*) lt_sed_strip_eq='s|=\([[A-Za-z]]:\)|\1|g' ;;
+ *) lt_sed_strip_eq='s|=/|/|g' ;;
+ esac
+ lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq`
+ case $lt_search_path_spec in
+ *\;*)
+ # if the path contains ";" then we assume it to be the separator
+ # otherwise default to the standard path separator (i.e. ":") - it is
+ # assumed that no part of a normal pathname contains ";" but that should
+ # okay in the real world where ";" in dirpaths is itself problematic.
+ lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'`
+ ;;
+ *)
+ lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"`
+ ;;
+ esac
+ # Ok, now we have the path, separated by spaces, we can step through it
+ # and add multilib dir if necessary...
+ lt_tmp_lt_search_path_spec=
+ lt_multi_os_dir=/`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
+ # ...but if some path component already ends with the multilib dir we assume
+ # that all is fine and trust -print-search-dirs as is (GCC 4.2? or newer).
+ case "$lt_multi_os_dir; $lt_search_path_spec " in
+ "/; "* | "/.; "* | "/./; "* | *"$lt_multi_os_dir "* | *"$lt_multi_os_dir/ "*)
+ lt_multi_os_dir=
+ ;;
+ esac
+ for lt_sys_path in $lt_search_path_spec; do
+ if test -d "$lt_sys_path$lt_multi_os_dir"; then
+ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path$lt_multi_os_dir"
+ elif test -n "$lt_multi_os_dir"; then
+ test -d "$lt_sys_path" && \
+ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
+ fi
+ done
+ lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk '
+BEGIN {RS = " "; FS = "/|\n";} {
+ lt_foo = "";
+ lt_count = 0;
+ for (lt_i = NF; lt_i > 0; lt_i--) {
+ if ($lt_i != "" && $lt_i != ".") {
+ if ($lt_i == "..") {
+ lt_count++;
+ } else {
+ if (lt_count == 0) {
+ lt_foo = "/" $lt_i lt_foo;
+ } else {
+ lt_count--;
+ }
+ }
+ }
+ }
+ if (lt_foo != "") { lt_freq[[lt_foo]]++; }
+ if (lt_freq[[lt_foo]] == 1) { print lt_foo; }
+}'`
+ # AWK program above erroneously prepends '/' to C:/dos/paths
+ # for these hosts.
+ case $host_os in
+ mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\
+ $SED 's|/\([[A-Za-z]]:\)|\1|g'` ;;
+ esac
+ sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP`
+else
+ sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+fi])
+library_names_spec=
+libname_spec='lib$name'
+soname_spec=
+shrext_cmds=.so
+postinstall_cmds=
+postuninstall_cmds=
+finish_cmds=
+finish_eval=
+shlibpath_var=
+shlibpath_overrides_runpath=unknown
+version_type=none
+dynamic_linker="$host_os ld.so"
+sys_lib_dlsearch_path_spec="/lib /usr/lib"
+need_lib_prefix=unknown
+hardcode_into_libs=no
+
+# when you set need_version to no, make sure it does not cause -set_version
+# flags to be left without arguments
+need_version=unknown
+
+AC_ARG_VAR([LT_SYS_LIBRARY_PATH],
+[User-defined run-time library search path.])
+
+case $host_os in
+aix3*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ library_names_spec='$libname$release$shared_ext$versuffix $libname.a'
+ shlibpath_var=LIBPATH
+
+ # AIX 3 has no versioning support, so we append a major version to the name.
+ soname_spec='$libname$release$shared_ext$major'
+ ;;
+
+aix[[4-9]]*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_lib_prefix=no
+ need_version=no
+ hardcode_into_libs=yes
+ if test ia64 = "$host_cpu"; then
+ # AIX 5 supports IA64
+ library_names_spec='$libname$release$shared_ext$major $libname$release$shared_ext$versuffix $libname$shared_ext'
+ shlibpath_var=LD_LIBRARY_PATH
+ else
+ # With GCC up to 2.95.x, collect2 would create an import file
+ # for dependence libraries. The import file would start with
+ # the line '#! .'. This would cause the generated library to
+ # depend on '.', always an invalid library. This was fixed in
+ # development snapshots of GCC prior to 3.0.
+ case $host_os in
+ aix4 | aix4.[[01]] | aix4.[[01]].*)
+ if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
+ echo ' yes '
+ echo '#endif'; } | $CC -E - | $GREP yes > /dev/null; then
+ :
+ else
+ can_build_shared=no
+ fi
+ ;;
+ esac
+ # Using Import Files as archive members, it is possible to support
+ # filename-based versioning of shared library archives on AIX. While
+ # this would work for both with and without runtime linking, it will
+ # prevent static linking of such archives. So we do filename-based
+ # shared library versioning with .so extension only, which is used
+ # when both runtime linking and shared linking is enabled.
+ # Unfortunately, runtime linking may impact performance, so we do
+ # not want this to be the default eventually. Also, we use the
+ # versioned .so libs for executables only if there is the -brtl
+ # linker flag in LDFLAGS as well, or --with-aix-soname=svr4 only.
+ # To allow for filename-based versioning support, we need to create
+ # libNAME.so.V as an archive file, containing:
+ # *) an Import File, referring to the versioned filename of the
+ # archive as well as the shared archive member, telling the
+ # bitwidth (32 or 64) of that shared object, and providing the
+ # list of exported symbols of that shared object, eventually
+ # decorated with the 'weak' keyword
+ # *) the shared object with the F_LOADONLY flag set, to really avoid
+ # it being seen by the linker.
+ # At run time we better use the real file rather than another symlink,
+ # but for link time we create the symlink libNAME.so -> libNAME.so.V
+
+ case $with_aix_soname,$aix_use_runtimelinking in
+ # AIX (on Power*) has no versioning support, so currently we cannot hardcode correct
+ # soname into executable. Probably we can add versioning support to
+ # collect2, so additional links can be useful in future.
+ aix,yes) # traditional libtool
+ dynamic_linker='AIX unversionable lib.so'
+ # If using run time linking (on AIX 4.2 or later) use lib<name>.so
+ # instead of lib<name>.a to let people know that these are not
+ # typical AIX shared libraries.
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ ;;
+ aix,no) # traditional AIX only
+ dynamic_linker='AIX lib.a[(]lib.so.V[)]'
+ # We preserve .a as extension for shared libraries through AIX4.2
+ # and later when we are not doing run time linking.
+ library_names_spec='$libname$release.a $libname.a'
+ soname_spec='$libname$release$shared_ext$major'
+ ;;
+ svr4,*) # full svr4 only
+ dynamic_linker="AIX lib.so.V[(]$shared_archive_member_spec.o[)]"
+ library_names_spec='$libname$release$shared_ext$major $libname$shared_ext'
+ # We do not specify a path in Import Files, so LIBPATH fires.
+ shlibpath_overrides_runpath=yes
+ ;;
+ *,yes) # both, prefer svr4
+ dynamic_linker="AIX lib.so.V[(]$shared_archive_member_spec.o[)], lib.a[(]lib.so.V[)]"
+ library_names_spec='$libname$release$shared_ext$major $libname$shared_ext'
+ # unpreferred sharedlib libNAME.a needs extra handling
+ postinstall_cmds='test -n "$linkname" || linkname="$realname"~func_stripname "" ".so" "$linkname"~$install_shared_prog "$dir/$func_stripname_result.$libext" "$destdir/$func_stripname_result.$libext"~test -z "$tstripme" || test -z "$striplib" || $striplib "$destdir/$func_stripname_result.$libext"'
+ postuninstall_cmds='for n in $library_names $old_library; do :; done~func_stripname "" ".so" "$n"~test "$func_stripname_result" = "$n" || func_append rmfiles " $odir/$func_stripname_result.$libext"'
+ # We do not specify a path in Import Files, so LIBPATH fires.
+ shlibpath_overrides_runpath=yes
+ ;;
+ *,no) # both, prefer aix
+ dynamic_linker="AIX lib.a[(]lib.so.V[)], lib.so.V[(]$shared_archive_member_spec.o[)]"
+ library_names_spec='$libname$release.a $libname.a'
+ soname_spec='$libname$release$shared_ext$major'
+ # unpreferred sharedlib libNAME.so.V and symlink libNAME.so need extra handling
+ postinstall_cmds='test -z "$dlname" || $install_shared_prog $dir/$dlname $destdir/$dlname~test -z "$tstripme" || test -z "$striplib" || $striplib $destdir/$dlname~test -n "$linkname" || linkname=$realname~func_stripname "" ".a" "$linkname"~(cd "$destdir" && $LN_S -f $dlname $func_stripname_result.so)'
+ postuninstall_cmds='test -z "$dlname" || func_append rmfiles " $odir/$dlname"~for n in $old_library $library_names; do :; done~func_stripname "" ".a" "$n"~func_append rmfiles " $odir/$func_stripname_result.so"'
+ ;;
+ esac
+ shlibpath_var=LIBPATH
+ fi
+ ;;
+
+amigaos*)
+ case $host_cpu in
+ powerpc)
+ # Since July 2007 AmigaOS4 officially supports .so libraries.
+ # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ ;;
+ m68k)
+ library_names_spec='$libname.ixlibrary $libname.a'
+ # Create ${libname}_ixlibrary.a entries in /sys/libs.
+ finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+ ;;
+ esac
+ ;;
+
+beos*)
+ library_names_spec='$libname$shared_ext'
+ dynamic_linker="$host_os ld.so"
+ shlibpath_var=LIBRARY_PATH
+ ;;
+
+bsdi[[45]]*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_version=no
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
+ sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
+ # the default ld.so.conf also contains /usr/contrib/lib and
+ # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
+ # libtool to hard-code these into programs
+ ;;
+
+cygwin* | mingw* | pw32* | cegcc*)
+ version_type=windows
+ shrext_cmds=.dll
+ need_version=no
+ need_lib_prefix=no
+
+ case $GCC,$cc_basename in
+ yes,*)
+ # gcc
+ library_names_spec='$libname.dll.a'
+ # DLL is installed to $(libdir)/../bin by postinstall_cmds
+ postinstall_cmds='base_file=`basename \$file`~
+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~
+ dldir=$destdir/`dirname \$dlpath`~
+ test -d \$dldir || mkdir -p \$dldir~
+ $install_prog $dir/$dlname \$dldir/$dlname~
+ chmod a+x \$dldir/$dlname~
+ if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+ eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+ fi'
+ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+ dlpath=$dir/\$dldll~
+ $RM \$dlpath'
+ shlibpath_overrides_runpath=yes
+
+ case $host_os in
+ cygwin*)
+ # Cygwin DLLs use 'cyg' prefix rather than 'lib'
+ soname_spec='`echo $libname | sed -e 's/^lib/cyg/'``echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext'
+m4_if([$1], [],[
+ sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"])
+ ;;
+ mingw* | cegcc*)
+ # MinGW DLLs use traditional 'lib' prefix
+ soname_spec='$libname`echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext'
+ ;;
+ pw32*)
+ # pw32 DLLs use 'pw' prefix rather than 'lib'
+ library_names_spec='`echo $libname | sed -e 's/^lib/pw/'``echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext'
+ ;;
+ esac
+ dynamic_linker='Win32 ld.exe'
+ ;;
+
+ *,cl*)
+ # Native MSVC
+ libname_spec='$name'
+ soname_spec='$libname`echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext'
+ library_names_spec='$libname.dll.lib'
+
+ case $build_os in
+ mingw*)
+ sys_lib_search_path_spec=
+ lt_save_ifs=$IFS
+ IFS=';'
+ for lt_path in $LIB
+ do
+ IFS=$lt_save_ifs
+ # Let DOS variable expansion print the short 8.3 style file name.
+ lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"`
+ sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path"
+ done
+ IFS=$lt_save_ifs
+ # Convert to MSYS style.
+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([[a-zA-Z]]\\):| /\\1|g' -e 's|^ ||'`
+ ;;
+ cygwin*)
+ # Convert to unix form, then to dos form, then back to unix form
+ # but this time dos style (no spaces!) so that the unix form looks
+ # like /cygdrive/c/PROGRA~1:/cygdr...
+ sys_lib_search_path_spec=`cygpath --path --unix "$LIB"`
+ sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null`
+ sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+ ;;
+ *)
+ sys_lib_search_path_spec=$LIB
+ if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then
+ # It is most probably a Windows format PATH.
+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+ else
+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+ fi
+ # FIXME: find the short name or the path components, as spaces are
+ # common. (e.g. "Program Files" -> "PROGRA~1")
+ ;;
+ esac
+
+ # DLL is installed to $(libdir)/../bin by postinstall_cmds
+ postinstall_cmds='base_file=`basename \$file`~
+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~
+ dldir=$destdir/`dirname \$dlpath`~
+ test -d \$dldir || mkdir -p \$dldir~
+ $install_prog $dir/$dlname \$dldir/$dlname'
+ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+ dlpath=$dir/\$dldll~
+ $RM \$dlpath'
+ shlibpath_overrides_runpath=yes
+ dynamic_linker='Win32 link.exe'
+ ;;
+
+ *)
+ # Assume MSVC wrapper
+ library_names_spec='$libname`echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext $libname.lib'
+ dynamic_linker='Win32 ld.exe'
+ ;;
+ esac
+ # FIXME: first we should search . and the directory the executable is in
+ shlibpath_var=PATH
+ ;;
+
+darwin* | rhapsody*)
+ dynamic_linker="$host_os dyld"
+ version_type=darwin
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='$libname$release$major$shared_ext $libname$shared_ext'
+ soname_spec='$libname$release$major$shared_ext'
+ shlibpath_overrides_runpath=yes
+ shlibpath_var=DYLD_LIBRARY_PATH
+ shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
+m4_if([$1], [],[
+ sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"])
+ sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
+ ;;
+
+dgux*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ ;;
+
+freebsd* | dragonfly*)
+ # DragonFly does not have aout. When/if they implement a new
+ # versioning mechanism, adjust this.
+ if test -x /usr/bin/objformat; then
+ objformat=`/usr/bin/objformat`
+ else
+ case $host_os in
+ freebsd[[23]].*) objformat=aout ;;
+ *) objformat=elf ;;
+ esac
+ fi
+ version_type=freebsd-$objformat
+ case $version_type in
+ freebsd-elf*)
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
+ need_version=no
+ need_lib_prefix=no
+ ;;
+ freebsd-*)
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
+ need_version=yes
+ ;;
+ esac
+ shlibpath_var=LD_LIBRARY_PATH
+ case $host_os in
+ freebsd2.*)
+ shlibpath_overrides_runpath=yes
+ ;;
+ freebsd3.[[01]]* | freebsdelf3.[[01]]*)
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ ;;
+ freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \
+ freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1)
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ ;;
+ *) # from 4.6 on, and DragonFly
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ ;;
+ esac
+ ;;
+
+haiku*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_lib_prefix=no
+ need_version=no
+ dynamic_linker="$host_os runtime_loader"
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
+ shlibpath_var=LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
+ hardcode_into_libs=yes
+ ;;
+
+hpux9* | hpux10* | hpux11*)
+ # Give a soname corresponding to the major version so that dld.sl refuses to
+ # link against other versions.
+ version_type=sunos
+ need_lib_prefix=no
+ need_version=no
+ case $host_cpu in
+ ia64*)
+ shrext_cmds='.so'
+ hardcode_into_libs=yes
+ dynamic_linker="$host_os dld.so"
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
+ if test 32 = "$HPUX_IA64_MODE"; then
+ sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+ sys_lib_dlsearch_path_spec=/usr/lib/hpux32
+ else
+ sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+ sys_lib_dlsearch_path_spec=/usr/lib/hpux64
+ fi
+ ;;
+ hppa*64*)
+ shrext_cmds='.sl'
+ hardcode_into_libs=yes
+ dynamic_linker="$host_os dld.sl"
+ shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
+ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
+ sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+ ;;
+ *)
+ shrext_cmds='.sl'
+ dynamic_linker="$host_os dld.sl"
+ shlibpath_var=SHLIB_PATH
+ shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
+ ;;
+ esac
+ # HP-UX runs *really* slowly unless shared libraries are mode 555, ...
+ postinstall_cmds='chmod 555 $lib'
+ # or fails outright, so override atomically:
+ install_override_mode=555
+ ;;
+
+interix[[3-9]]*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
+ dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ ;;
+
+irix5* | irix6* | nonstopux*)
+ case $host_os in
+ nonstopux*) version_type=nonstopux ;;
+ *)
+ if test yes = "$lt_cv_prog_gnu_ld"; then
+ version_type=linux # correct to gnu/linux during the next big refactor
+ else
+ version_type=irix
+ fi ;;
+ esac
+ need_lib_prefix=no
+ need_version=no
+ soname_spec='$libname$release$shared_ext$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$release$shared_ext $libname$shared_ext'
+ case $host_os in
+ irix5* | nonstopux*)
+ libsuff= shlibsuff=
+ ;;
+ *)
+ case $LD in # libtool.m4 will add one of these switches to LD
+ *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
+ libsuff= shlibsuff= libmagic=32-bit;;
+ *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
+ libsuff=32 shlibsuff=N32 libmagic=N32;;
+ *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
+ libsuff=64 shlibsuff=64 libmagic=64-bit;;
+ *) libsuff= shlibsuff= libmagic=never-match;;
+ esac
+ ;;
+ esac
+ shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
+ shlibpath_overrides_runpath=no
+ sys_lib_search_path_spec="/usr/lib$libsuff /lib$libsuff /usr/local/lib$libsuff"
+ sys_lib_dlsearch_path_spec="/usr/lib$libsuff /lib$libsuff"
+ hardcode_into_libs=yes
+ ;;
+
+# No shared lib support for Linux oldld, aout, or coff.
+linux*oldld* | linux*aout* | linux*coff*)
+ dynamic_linker=no
+ ;;
+
+linux*android*)
+ version_type=none # Android doesn't support versioned libraries.
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='$libname$release$shared_ext'
+ soname_spec='$libname$release$shared_ext'
+ finish_cmds=
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+
+ # This implies no fast_install, which is unacceptable.
+ # Some rework will be needed to allow for fast_install
+ # before this can be enabled.
+ hardcode_into_libs=yes
+
+ dynamic_linker='Android linker'
+ # Don't embed -rpath directories since the linker doesn't support them.
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ ;;
+
+# This must be glibc/ELF.
+linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+
+ # Some binutils ld are patched to set DT_RUNPATH
+ AC_CACHE_VAL([lt_cv_shlibpath_overrides_runpath],
+ [lt_cv_shlibpath_overrides_runpath=no
+ save_LDFLAGS=$LDFLAGS
+ save_libdir=$libdir
+ eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \
+ LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\""
+ AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
+ [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null],
+ [lt_cv_shlibpath_overrides_runpath=yes])])
+ LDFLAGS=$save_LDFLAGS
+ libdir=$save_libdir
+ ])
+ shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath
+
+ # This implies no fast_install, which is unacceptable.
+ # Some rework will be needed to allow for fast_install
+ # before this can be enabled.
+ hardcode_into_libs=yes
+
+ # Ideally, we could use ldconfig to report *all* directores which are
+ # searched for libraries, however this is still not possible. Aside from not
+ # being certain /sbin/ldconfig is available, command
+ # 'ldconfig -N -X -v | grep ^/' on 64bit Fedora does not report /usr/lib64,
+ # even though it is searched at run-time. Try to do the best guess by
+ # appending ld.so.conf contents (and includes) to the search path.
+ if test -f /etc/ld.so.conf; then
+ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
+ sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
+ fi
+
+ # We used to test for /lib/ld.so.1 and disable shared libraries on
+ # powerpc, because MkLinux only supported shared libraries with the
+ # GNU dynamic linker. Since this was broken with cross compilers,
+ # most powerpc-linux boxes support dynamic linking these days and
+ # people can always --disable-shared, the test was removed, and we
+ # assume the GNU/Linux dynamic linker is in use.
+ dynamic_linker='GNU/Linux ld.so'
+ ;;
+
+netbsd*)
+ version_type=sunos
+ need_lib_prefix=no
+ need_version=no
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+ dynamic_linker='NetBSD (a.out) ld.so'
+ else
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
+ dynamic_linker='NetBSD ld.elf_so'
+ fi
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ ;;
+
+newsos6)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ ;;
+
+*nto* | *qnx*)
+ version_type=qnx
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ dynamic_linker='ldqnx.so'
+ ;;
+
+openbsd* | bitrig*)
+ version_type=sunos
+ sys_lib_dlsearch_path_spec=/usr/lib
+ need_lib_prefix=no
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then
+ need_version=no
+ else
+ need_version=yes
+ fi
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ ;;
+
+os2*)
+ libname_spec='$name'
+ version_type=windows
+ shrext_cmds=.dll
+ need_version=no
+ need_lib_prefix=no
+ # OS/2 can only load a DLL with a base name of 8 characters or less.
+ soname_spec='`test -n "$os2dllname" && libname="$os2dllname";
+ v=$($ECHO $release$versuffix | tr -d .-);
+ n=$($ECHO $libname | cut -b -$((8 - ${#v})) | tr . _);
+ $ECHO $n$v`$shared_ext'
+ library_names_spec='${libname}_dll.$libext'
+ dynamic_linker='OS/2 ld.exe'
+ shlibpath_var=BEGINLIBPATH
+ sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+ postinstall_cmds='base_file=`basename \$file`~
+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; $ECHO \$dlname'\''`~
+ dldir=$destdir/`dirname \$dlpath`~
+ test -d \$dldir || mkdir -p \$dldir~
+ $install_prog $dir/$dlname \$dldir/$dlname~
+ chmod a+x \$dldir/$dlname~
+ if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+ eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+ fi'
+ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; $ECHO \$dlname'\''`~
+ dlpath=$dir/\$dldll~
+ $RM \$dlpath'
+ ;;
+
+osf3* | osf4* | osf5*)
+ version_type=osf
+ need_lib_prefix=no
+ need_version=no
+ soname_spec='$libname$release$shared_ext$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ shlibpath_var=LD_LIBRARY_PATH
+ sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+ ;;
+
+rdos*)
+ dynamic_linker=no
+ ;;
+
+solaris*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ # ldd complains unless libraries are executable
+ postinstall_cmds='chmod +x $lib'
+ ;;
+
+sunos4*)
+ version_type=sunos
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
+ finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ if test yes = "$with_gnu_ld"; then
+ need_lib_prefix=no
+ fi
+ need_version=yes
+ ;;
+
+sysv4 | sysv4.3*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ case $host_vendor in
+ sni)
+ shlibpath_overrides_runpath=no
+ need_lib_prefix=no
+ runpath_var=LD_RUN_PATH
+ ;;
+ siemens)
+ need_lib_prefix=no
+ ;;
+ motorola)
+ need_lib_prefix=no
+ need_version=no
+ shlibpath_overrides_runpath=no
+ sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
+ ;;
+ esac
+ ;;
+
+sysv4*MP*)
+ if test -d /usr/nec; then
+ version_type=linux # correct to gnu/linux during the next big refactor
+ library_names_spec='$libname$shared_ext.$versuffix $libname$shared_ext.$major $libname$shared_ext'
+ soname_spec='$libname$shared_ext.$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ fi
+ ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+ version_type=sco
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ if test yes = "$with_gnu_ld"; then
+ sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
+ else
+ sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
+ case $host_os in
+ sco3.2v5*)
+ sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
+ ;;
+ esac
+ fi
+ sys_lib_dlsearch_path_spec='/usr/lib'
+ ;;
+
+tpf*)
+ # TPF is a cross-target only. Preferred cross-host = GNU/Linux.
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ ;;
+
+uts4*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ ;;
+
+*)
+ dynamic_linker=no
+ ;;
+esac
+AC_MSG_RESULT([$dynamic_linker])
+test no = "$dynamic_linker" && can_build_shared=no
+
+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+if test yes = "$GCC"; then
+ variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+fi
+
+if test set = "${lt_cv_sys_lib_search_path_spec+set}"; then
+ sys_lib_search_path_spec=$lt_cv_sys_lib_search_path_spec
+fi
+
+if test set = "${lt_cv_sys_lib_dlsearch_path_spec+set}"; then
+ sys_lib_dlsearch_path_spec=$lt_cv_sys_lib_dlsearch_path_spec
+fi
+
+# remember unaugmented sys_lib_dlsearch_path content for libtool script decls...
+configure_time_dlsearch_path=$sys_lib_dlsearch_path_spec
+
+# ... but it needs LT_SYS_LIBRARY_PATH munging for other configure-time code
+func_munge_path_list sys_lib_dlsearch_path_spec "$LT_SYS_LIBRARY_PATH"
+
+# to be used as default LT_SYS_LIBRARY_PATH value in generated libtool
+configure_time_lt_sys_library_path=$LT_SYS_LIBRARY_PATH
+
+_LT_DECL([], [variables_saved_for_relink], [1],
+ [Variables whose values should be saved in libtool wrapper scripts and
+ restored at link time])
+_LT_DECL([], [need_lib_prefix], [0],
+ [Do we need the "lib" prefix for modules?])
+_LT_DECL([], [need_version], [0], [Do we need a version for libraries?])
+_LT_DECL([], [version_type], [0], [Library versioning type])
+_LT_DECL([], [runpath_var], [0], [Shared library runtime path variable])
+_LT_DECL([], [shlibpath_var], [0],[Shared library path variable])
+_LT_DECL([], [shlibpath_overrides_runpath], [0],
+ [Is shlibpath searched before the hard-coded library search path?])
+_LT_DECL([], [libname_spec], [1], [Format of library name prefix])
+_LT_DECL([], [library_names_spec], [1],
+ [[List of archive names. First name is the real one, the rest are links.
+ The last name is the one that the linker finds with -lNAME]])
+_LT_DECL([], [soname_spec], [1],
+ [[The coded name of the library, if different from the real name]])
+_LT_DECL([], [install_override_mode], [1],
+ [Permission mode override for installation of shared libraries])
+_LT_DECL([], [postinstall_cmds], [2],
+ [Command to use after installation of a shared archive])
+_LT_DECL([], [postuninstall_cmds], [2],
+ [Command to use after uninstallation of a shared archive])
+_LT_DECL([], [finish_cmds], [2],
+ [Commands used to finish a libtool library installation in a directory])
+_LT_DECL([], [finish_eval], [1],
+ [[As "finish_cmds", except a single script fragment to be evaled but
+ not shown]])
+_LT_DECL([], [hardcode_into_libs], [0],
+ [Whether we should hardcode library paths into libraries])
+_LT_DECL([], [sys_lib_search_path_spec], [2],
+ [Compile-time system search path for libraries])
+_LT_DECL([sys_lib_dlsearch_path_spec], [configure_time_dlsearch_path], [2],
+ [Detected run-time system search path for libraries])
+_LT_DECL([], [configure_time_lt_sys_library_path], [2],
+ [Explicit LT_SYS_LIBRARY_PATH set during ./configure time])
+])# _LT_SYS_DYNAMIC_LINKER
+
+
+# _LT_PATH_TOOL_PREFIX(TOOL)
+# --------------------------
+# find a file program that can recognize shared library
+AC_DEFUN([_LT_PATH_TOOL_PREFIX],
+[m4_require([_LT_DECL_EGREP])dnl
+AC_MSG_CHECKING([for $1])
+AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
+[case $MAGIC_CMD in
+[[\\/*] | ?:[\\/]*])
+ lt_cv_path_MAGIC_CMD=$MAGIC_CMD # Let the user override the test with a path.
+ ;;
+*)
+ lt_save_MAGIC_CMD=$MAGIC_CMD
+ lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
+dnl $ac_dummy forces splitting on constant user-supplied paths.
+dnl POSIX.2 word splitting is done only on the output of word expansions,
+dnl not every word. This closes a longstanding sh security hole.
+ ac_dummy="m4_if([$2], , $PATH, [$2])"
+ for ac_dir in $ac_dummy; do
+ IFS=$lt_save_ifs
+ test -z "$ac_dir" && ac_dir=.
+ if test -f "$ac_dir/$1"; then
+ lt_cv_path_MAGIC_CMD=$ac_dir/"$1"
+ if test -n "$file_magic_test_file"; then
+ case $deplibs_check_method in
+ "file_magic "*)
+ file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
+ MAGIC_CMD=$lt_cv_path_MAGIC_CMD
+ if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+ $EGREP "$file_magic_regex" > /dev/null; then
+ :
+ else
+ cat <<_LT_EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such. This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem. Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+_LT_EOF
+ fi ;;
+ esac
+ fi
+ break
+ fi
+ done
+ IFS=$lt_save_ifs
+ MAGIC_CMD=$lt_save_MAGIC_CMD
+ ;;
+esac])
+MAGIC_CMD=$lt_cv_path_MAGIC_CMD
+if test -n "$MAGIC_CMD"; then
+ AC_MSG_RESULT($MAGIC_CMD)
+else
+ AC_MSG_RESULT(no)
+fi
+_LT_DECL([], [MAGIC_CMD], [0],
+ [Used to examine libraries when file_magic_cmd begins with "file"])dnl
+])# _LT_PATH_TOOL_PREFIX
+
+# Old name:
+AU_ALIAS([AC_PATH_TOOL_PREFIX], [_LT_PATH_TOOL_PREFIX])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_PATH_TOOL_PREFIX], [])
+
+
+# _LT_PATH_MAGIC
+# --------------
+# find a file program that can recognize a shared library
+m4_defun([_LT_PATH_MAGIC],
+[_LT_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH)
+if test -z "$lt_cv_path_MAGIC_CMD"; then
+ if test -n "$ac_tool_prefix"; then
+ _LT_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH)
+ else
+ MAGIC_CMD=:
+ fi
+fi
+])# _LT_PATH_MAGIC
+
+
+# LT_PATH_LD
+# ----------
+# find the pathname to the GNU or non-GNU linker
+AC_DEFUN([LT_PATH_LD],
+[AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_DECL_EGREP])dnl
+m4_require([_LT_PROG_ECHO_BACKSLASH])dnl
+
+AC_ARG_WITH([gnu-ld],
+ [AS_HELP_STRING([--with-gnu-ld],
+ [assume the C compiler uses GNU ld @<:@default=no@:>@])],
+ [test no = "$withval" || with_gnu_ld=yes],
+ [with_gnu_ld=no])dnl
+
+ac_prog=ld
+if test yes = "$GCC"; then
+ # Check if gcc -print-prog-name=ld gives a path.
+ AC_MSG_CHECKING([for ld used by $CC])
+ case $host in
+ *-*-mingw*)
+ # gcc leaves a trailing carriage return, which upsets mingw
+ ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+ *)
+ ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+ esac
+ case $ac_prog in
+ # Accept absolute paths.
+ [[\\/]]* | ?:[[\\/]]*)
+ re_direlt='/[[^/]][[^/]]*/\.\./'
+ # Canonicalize the pathname of ld
+ ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
+ while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
+ ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
+ done
+ test -z "$LD" && LD=$ac_prog
+ ;;
+ "")
+ # If it fails, then pretend we aren't using GCC.
+ ac_prog=ld
+ ;;
+ *)
+ # If it is relative, then search for the first ld in PATH.
+ with_gnu_ld=unknown
+ ;;
+ esac
+elif test yes = "$with_gnu_ld"; then
+ AC_MSG_CHECKING([for GNU ld])
+else
+ AC_MSG_CHECKING([for non-GNU ld])
+fi
+AC_CACHE_VAL(lt_cv_path_LD,
+[if test -z "$LD"; then
+ lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
+ for ac_dir in $PATH; do
+ IFS=$lt_save_ifs
+ test -z "$ac_dir" && ac_dir=.
+ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+ lt_cv_path_LD=$ac_dir/$ac_prog
+ # Check to see if the program is GNU ld. I'd rather use --version,
+ # but apparently some variants of GNU ld only accept -v.
+ # Break only if it was the GNU/non-GNU ld that we prefer.
+ case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
+ *GNU* | *'with BFD'*)
+ test no != "$with_gnu_ld" && break
+ ;;
+ *)
+ test yes != "$with_gnu_ld" && break
+ ;;
+ esac
+ fi
+ done
+ IFS=$lt_save_ifs
+else
+ lt_cv_path_LD=$LD # Let the user override the test with a path.
+fi])
+LD=$lt_cv_path_LD
+if test -n "$LD"; then
+ AC_MSG_RESULT($LD)
+else
+ AC_MSG_RESULT(no)
+fi
+test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
+_LT_PATH_LD_GNU
+AC_SUBST([LD])
+
+_LT_TAGDECL([], [LD], [1], [The linker used to build libraries])
+])# LT_PATH_LD
+
+# Old names:
+AU_ALIAS([AM_PROG_LD], [LT_PATH_LD])
+AU_ALIAS([AC_PROG_LD], [LT_PATH_LD])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AM_PROG_LD], [])
+dnl AC_DEFUN([AC_PROG_LD], [])
+
+
+# _LT_PATH_LD_GNU
+#- --------------
+m4_defun([_LT_PATH_LD_GNU],
+[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
+[# I'd rather use --version here, but apparently some GNU lds only accept -v.
+case `$LD -v 2>&1 </dev/null` in
+*GNU* | *'with BFD'*)
+ lt_cv_prog_gnu_ld=yes
+ ;;
+*)
+ lt_cv_prog_gnu_ld=no
+ ;;
+esac])
+with_gnu_ld=$lt_cv_prog_gnu_ld
+])# _LT_PATH_LD_GNU
+
+
+# _LT_CMD_RELOAD
+# --------------
+# find reload flag for linker
+# -- PORTME Some linkers may need a different reload flag.
+m4_defun([_LT_CMD_RELOAD],
+[AC_CACHE_CHECK([for $LD option to reload object files],
+ lt_cv_ld_reload_flag,
+ [lt_cv_ld_reload_flag='-r'])
+reload_flag=$lt_cv_ld_reload_flag
+case $reload_flag in
+"" | " "*) ;;
+*) reload_flag=" $reload_flag" ;;
+esac
+reload_cmds='$LD$reload_flag -o $output$reload_objs'
+case $host_os in
+ cygwin* | mingw* | pw32* | cegcc*)
+ if test yes != "$GCC"; then
+ reload_cmds=false
+ fi
+ ;;
+ darwin*)
+ if test yes = "$GCC"; then
+ reload_cmds='$LTCC $LTCFLAGS -nostdlib $wl-r -o $output$reload_objs'
+ else
+ reload_cmds='$LD$reload_flag -o $output$reload_objs'
+ fi
+ ;;
+esac
+_LT_TAGDECL([], [reload_flag], [1], [How to create reloadable object files])dnl
+_LT_TAGDECL([], [reload_cmds], [2])dnl
+])# _LT_CMD_RELOAD
+
+
+# _LT_PATH_DD
+# -----------
+# find a working dd
+m4_defun([_LT_PATH_DD],
+[AC_CACHE_CHECK([for a working dd], [ac_cv_path_lt_DD],
+[printf 0123456789abcdef0123456789abcdef >conftest.i
+cat conftest.i conftest.i >conftest2.i
+: ${lt_DD:=$DD}
+AC_PATH_PROGS_FEATURE_CHECK([lt_DD], [dd],
+[if "$ac_path_lt_DD" bs=32 count=1 <conftest2.i >conftest.out 2>/dev/null; then
+ cmp -s conftest.i conftest.out \
+ && ac_cv_path_lt_DD="$ac_path_lt_DD" ac_path_lt_DD_found=:
+fi])
+rm -f conftest.i conftest2.i conftest.out])
+])# _LT_PATH_DD
+
+
+# _LT_CMD_TRUNCATE
+# ----------------
+# find command to truncate a binary pipe
+m4_defun([_LT_CMD_TRUNCATE],
+[m4_require([_LT_PATH_DD])
+AC_CACHE_CHECK([how to truncate binary pipes], [lt_cv_truncate_bin],
+[printf 0123456789abcdef0123456789abcdef >conftest.i
+cat conftest.i conftest.i >conftest2.i
+lt_cv_truncate_bin=
+if "$ac_cv_path_lt_DD" bs=32 count=1 <conftest2.i >conftest.out 2>/dev/null; then
+ cmp -s conftest.i conftest.out \
+ && lt_cv_truncate_bin="$ac_cv_path_lt_DD bs=4096 count=1"
+fi
+rm -f conftest.i conftest2.i conftest.out
+test -z "$lt_cv_truncate_bin" && lt_cv_truncate_bin="$SED -e 4q"])
+_LT_DECL([lt_truncate_bin], [lt_cv_truncate_bin], [1],
+ [Command to truncate a binary pipe])
+])# _LT_CMD_TRUNCATE
+
+
+# _LT_CHECK_MAGIC_METHOD
+# ----------------------
+# how to check for library dependencies
+# -- PORTME fill in with the dynamic library characteristics
+m4_defun([_LT_CHECK_MAGIC_METHOD],
+[m4_require([_LT_DECL_EGREP])
+m4_require([_LT_DECL_OBJDUMP])
+AC_CACHE_CHECK([how to recognize dependent libraries],
+lt_cv_deplibs_check_method,
+[lt_cv_file_magic_cmd='$MAGIC_CMD'
+lt_cv_file_magic_test_file=
+lt_cv_deplibs_check_method='unknown'
+# Need to set the preceding variable on all platforms that support
+# interlibrary dependencies.
+# 'none' -- dependencies not supported.
+# 'unknown' -- same as none, but documents that we really don't know.
+# 'pass_all' -- all dependencies passed with no checks.
+# 'test_compile' -- check by making test program.
+# 'file_magic [[regex]]' -- check by looking for files in library path
+# that responds to the $file_magic_cmd with a given extended regex.
+# If you have 'file' or equivalent on your system and you're not sure
+# whether 'pass_all' will *always* work, you probably want this one.
+
+case $host_os in
+aix[[4-9]]*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+beos*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+bsdi[[45]]*)
+ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)'
+ lt_cv_file_magic_cmd='/usr/bin/file -L'
+ lt_cv_file_magic_test_file=/shlib/libc.so
+ ;;
+
+cygwin*)
+ # func_win32_libid is a shell function defined in ltmain.sh
+ lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+ lt_cv_file_magic_cmd='func_win32_libid'
+ ;;
+
+mingw* | pw32*)
+ # Base MSYS/MinGW do not provide the 'file' command needed by
+ # func_win32_libid shell function, so use a weaker test based on 'objdump',
+ # unless we find 'file', for example because we are cross-compiling.
+ if ( file / ) >/dev/null 2>&1; then
+ lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+ lt_cv_file_magic_cmd='func_win32_libid'
+ else
+ # Keep this pattern in sync with the one in func_win32_libid.
+ lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)'
+ lt_cv_file_magic_cmd='$OBJDUMP -f'
+ fi
+ ;;
+
+cegcc*)
+ # use the weaker test based on 'objdump'. See mingw*.
+ lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?'
+ lt_cv_file_magic_cmd='$OBJDUMP -f'
+ ;;
+
+darwin* | rhapsody*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+freebsd* | dragonfly*)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
+ case $host_cpu in
+ i*86 )
+ # Not sure whether the presence of OpenBSD here was a mistake.
+ # Let's accept both of them until this is cleared up.
+ lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library'
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
+ ;;
+ esac
+ else
+ lt_cv_deplibs_check_method=pass_all
+ fi
+ ;;
+
+haiku*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+hpux10.20* | hpux11*)
+ lt_cv_file_magic_cmd=/usr/bin/file
+ case $host_cpu in
+ ia64*)
+ lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64'
+ lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
+ ;;
+ hppa*64*)
+ [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]']
+ lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
+ ;;
+ *)
+ lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]]\.[[0-9]]) shared library'
+ lt_cv_file_magic_test_file=/usr/lib/libc.sl
+ ;;
+ esac
+ ;;
+
+interix[[3-9]]*)
+ # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
+ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$'
+ ;;
+
+irix5* | irix6* | nonstopux*)
+ case $LD in
+ *-32|*"-32 ") libmagic=32-bit;;
+ *-n32|*"-n32 ") libmagic=N32;;
+ *-64|*"-64 ") libmagic=64-bit;;
+ *) libmagic=never-match;;
+ esac
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+# This must be glibc/ELF.
+linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+netbsd*)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
+ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
+ else
+ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$'
+ fi
+ ;;
+
+newos6*)
+ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)'
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=/usr/lib/libnls.so
+ ;;
+
+*nto* | *qnx*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+openbsd* | bitrig*)
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then
+ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$'
+ else
+ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
+ fi
+ ;;
+
+osf3* | osf4* | osf5*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+rdos*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+solaris*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+sysv4 | sysv4.3*)
+ case $host_vendor in
+ motorola)
+ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]'
+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
+ ;;
+ ncr)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+ sequent)
+ lt_cv_file_magic_cmd='/bin/file'
+ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )'
+ ;;
+ sni)
+ lt_cv_file_magic_cmd='/bin/file'
+ lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib"
+ lt_cv_file_magic_test_file=/lib/libc.so
+ ;;
+ siemens)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+ pc)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+ esac
+ ;;
+
+tpf*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+os2*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+esac
+])
+
+file_magic_glob=
+want_nocaseglob=no
+if test "$build" = "$host"; then
+ case $host_os in
+ mingw* | pw32*)
+ if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then
+ want_nocaseglob=yes
+ else
+ file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[[\1]]\/[[\1]]\/g;/g"`
+ fi
+ ;;
+ esac
+fi
+
+file_magic_cmd=$lt_cv_file_magic_cmd
+deplibs_check_method=$lt_cv_deplibs_check_method
+test -z "$deplibs_check_method" && deplibs_check_method=unknown
+
+_LT_DECL([], [deplibs_check_method], [1],
+ [Method to check whether dependent libraries are shared objects])
+_LT_DECL([], [file_magic_cmd], [1],
+ [Command to use when deplibs_check_method = "file_magic"])
+_LT_DECL([], [file_magic_glob], [1],
+ [How to find potential files when deplibs_check_method = "file_magic"])
+_LT_DECL([], [want_nocaseglob], [1],
+ [Find potential files using nocaseglob when deplibs_check_method = "file_magic"])
+])# _LT_CHECK_MAGIC_METHOD
+
+
+# LT_PATH_NM
+# ----------
+# find the pathname to a BSD- or MS-compatible name lister
+AC_DEFUN([LT_PATH_NM],
+[AC_REQUIRE([AC_PROG_CC])dnl
+AC_CACHE_CHECK([for BSD- or MS-compatible name lister (nm)], lt_cv_path_NM,
+[if test -n "$NM"; then
+ # Let the user override the test.
+ lt_cv_path_NM=$NM
+else
+ lt_nm_to_check=${ac_tool_prefix}nm
+ if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
+ lt_nm_to_check="$lt_nm_to_check nm"
+ fi
+ for lt_tmp_nm in $lt_nm_to_check; do
+ lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
+ for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
+ IFS=$lt_save_ifs
+ test -z "$ac_dir" && ac_dir=.
+ tmp_nm=$ac_dir/$lt_tmp_nm
+ if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext"; then
+ # Check to see if the nm accepts a BSD-compat flag.
+ # Adding the 'sed 1q' prevents false positives on HP-UX, which says:
+ # nm: unknown option "B" ignored
+ # Tru64's nm complains that /dev/null is an invalid object file
+ # MSYS converts /dev/null to NUL, MinGW nm treats NUL as empty
+ case $build_os in
+ mingw*) lt_bad_file=conftest.nm/nofile ;;
+ *) lt_bad_file=/dev/null ;;
+ esac
+ case `"$tmp_nm" -B $lt_bad_file 2>&1 | sed '1q'` in
+ *$lt_bad_file* | *'Invalid file or object type'*)
+ lt_cv_path_NM="$tmp_nm -B"
+ break 2
+ ;;
+ *)
+ case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
+ */dev/null*)
+ lt_cv_path_NM="$tmp_nm -p"
+ break 2
+ ;;
+ *)
+ lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
+ continue # so that we can try to find one that supports BSD flags
+ ;;
+ esac
+ ;;
+ esac
+ fi
+ done
+ IFS=$lt_save_ifs
+ done
+ : ${lt_cv_path_NM=no}
+fi])
+if test no != "$lt_cv_path_NM"; then
+ NM=$lt_cv_path_NM
+else
+ # Didn't find any BSD compatible name lister, look for dumpbin.
+ if test -n "$DUMPBIN"; then :
+ # Let the user override the test.
+ else
+ AC_CHECK_TOOLS(DUMPBIN, [dumpbin "link -dump"], :)
+ case `$DUMPBIN -symbols -headers /dev/null 2>&1 | sed '1q'` in
+ *COFF*)
+ DUMPBIN="$DUMPBIN -symbols -headers"
+ ;;
+ *)
+ DUMPBIN=:
+ ;;
+ esac
+ fi
+ AC_SUBST([DUMPBIN])
+ if test : != "$DUMPBIN"; then
+ NM=$DUMPBIN
+ fi
+fi
+test -z "$NM" && NM=nm
+AC_SUBST([NM])
+_LT_DECL([], [NM], [1], [A BSD- or MS-compatible name lister])dnl
+
+AC_CACHE_CHECK([the name lister ($NM) interface], [lt_cv_nm_interface],
+ [lt_cv_nm_interface="BSD nm"
+ echo "int some_variable = 0;" > conftest.$ac_ext
+ (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&AS_MESSAGE_LOG_FD)
+ (eval "$ac_compile" 2>conftest.err)
+ cat conftest.err >&AS_MESSAGE_LOG_FD
+ (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD)
+ (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
+ cat conftest.err >&AS_MESSAGE_LOG_FD
+ (eval echo "\"\$as_me:$LINENO: output\"" >&AS_MESSAGE_LOG_FD)
+ cat conftest.out >&AS_MESSAGE_LOG_FD
+ if $GREP 'External.*some_variable' conftest.out > /dev/null; then
+ lt_cv_nm_interface="MS dumpbin"
+ fi
+ rm -f conftest*])
+])# LT_PATH_NM
+
+# Old names:
+AU_ALIAS([AM_PROG_NM], [LT_PATH_NM])
+AU_ALIAS([AC_PROG_NM], [LT_PATH_NM])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AM_PROG_NM], [])
+dnl AC_DEFUN([AC_PROG_NM], [])
+
+# _LT_CHECK_SHAREDLIB_FROM_LINKLIB
+# --------------------------------
+# how to determine the name of the shared library
+# associated with a specific link library.
+# -- PORTME fill in with the dynamic library characteristics
+m4_defun([_LT_CHECK_SHAREDLIB_FROM_LINKLIB],
+[m4_require([_LT_DECL_EGREP])
+m4_require([_LT_DECL_OBJDUMP])
+m4_require([_LT_DECL_DLLTOOL])
+AC_CACHE_CHECK([how to associate runtime and link libraries],
+lt_cv_sharedlib_from_linklib_cmd,
+[lt_cv_sharedlib_from_linklib_cmd='unknown'
+
+case $host_os in
+cygwin* | mingw* | pw32* | cegcc*)
+ # two different shell functions defined in ltmain.sh;
+ # decide which one to use based on capabilities of $DLLTOOL
+ case `$DLLTOOL --help 2>&1` in
+ *--identify-strict*)
+ lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib
+ ;;
+ *)
+ lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback
+ ;;
+ esac
+ ;;
+*)
+ # fallback: assume linklib IS sharedlib
+ lt_cv_sharedlib_from_linklib_cmd=$ECHO
+ ;;
+esac
+])
+sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd
+test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO
+
+_LT_DECL([], [sharedlib_from_linklib_cmd], [1],
+ [Command to associate shared and link libraries])
+])# _LT_CHECK_SHAREDLIB_FROM_LINKLIB
+
+
+# _LT_PATH_MANIFEST_TOOL
+# ----------------------
+# locate the manifest tool
+m4_defun([_LT_PATH_MANIFEST_TOOL],
+[AC_CHECK_TOOL(MANIFEST_TOOL, mt, :)
+test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt
+AC_CACHE_CHECK([if $MANIFEST_TOOL is a manifest tool], [lt_cv_path_mainfest_tool],
+ [lt_cv_path_mainfest_tool=no
+ echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&AS_MESSAGE_LOG_FD
+ $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out
+ cat conftest.err >&AS_MESSAGE_LOG_FD
+ if $GREP 'Manifest Tool' conftest.out > /dev/null; then
+ lt_cv_path_mainfest_tool=yes
+ fi
+ rm -f conftest*])
+if test yes != "$lt_cv_path_mainfest_tool"; then
+ MANIFEST_TOOL=:
+fi
+_LT_DECL([], [MANIFEST_TOOL], [1], [Manifest tool])dnl
+])# _LT_PATH_MANIFEST_TOOL
+
+
+# _LT_DLL_DEF_P([FILE])
+# ---------------------
+# True iff FILE is a Windows DLL '.def' file.
+# Keep in sync with func_dll_def_p in the libtool script
+AC_DEFUN([_LT_DLL_DEF_P],
+[dnl
+ test DEF = "`$SED -n dnl
+ -e '\''s/^[[ ]]*//'\'' dnl Strip leading whitespace
+ -e '\''/^\(;.*\)*$/d'\'' dnl Delete empty lines and comments
+ -e '\''s/^\(EXPORTS\|LIBRARY\)\([[ ]].*\)*$/DEF/p'\'' dnl
+ -e q dnl Only consider the first "real" line
+ $1`" dnl
+])# _LT_DLL_DEF_P
+
+
+# LT_LIB_M
+# --------
+# check for math library
+AC_DEFUN([LT_LIB_M],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+LIBM=
+case $host in
+*-*-beos* | *-*-cegcc* | *-*-cygwin* | *-*-haiku* | *-*-pw32* | *-*-darwin*)
+ # These system don't have libm, or don't need it
+ ;;
+*-ncr-sysv4.3*)
+ AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM=-lmw)
+ AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm")
+ ;;
+*)
+ AC_CHECK_LIB(m, cos, LIBM=-lm)
+ ;;
+esac
+AC_SUBST([LIBM])
+])# LT_LIB_M
+
+# Old name:
+AU_ALIAS([AC_CHECK_LIBM], [LT_LIB_M])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_CHECK_LIBM], [])
+
+
+# _LT_COMPILER_NO_RTTI([TAGNAME])
+# -------------------------------
+m4_defun([_LT_COMPILER_NO_RTTI],
+[m4_require([_LT_TAG_COMPILER])dnl
+
+_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
+
+if test yes = "$GCC"; then
+ case $cc_basename in
+ nvcc*)
+ _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -Xcompiler -fno-builtin' ;;
+ *)
+ _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' ;;
+ esac
+
+ _LT_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions],
+ lt_cv_prog_compiler_rtti_exceptions,
+ [-fno-rtti -fno-exceptions], [],
+ [_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"])
+fi
+_LT_TAGDECL([no_builtin_flag], [lt_prog_compiler_no_builtin_flag], [1],
+ [Compiler flag to turn off builtin functions])
+])# _LT_COMPILER_NO_RTTI
+
+
+# _LT_CMD_GLOBAL_SYMBOLS
+# ----------------------
+m4_defun([_LT_CMD_GLOBAL_SYMBOLS],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([AC_PROG_AWK])dnl
+AC_REQUIRE([LT_PATH_NM])dnl
+AC_REQUIRE([LT_PATH_LD])dnl
+m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_DECL_EGREP])dnl
+m4_require([_LT_TAG_COMPILER])dnl
+
+# Check for command to grab the raw symbol name followed by C symbol from nm.
+AC_MSG_CHECKING([command to parse $NM output from $compiler object])
+AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe],
+[
+# These are sane defaults that work on at least a few old systems.
+# [They come from Ultrix. What could be older than Ultrix?!! ;)]
+
+# Character class describing NM global symbol codes.
+symcode='[[BCDEGRST]]'
+
+# Regexp to match symbols that can be accessed directly from C.
+sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)'
+
+# Define system-specific variables.
+case $host_os in
+aix*)
+ symcode='[[BCDT]]'
+ ;;
+cygwin* | mingw* | pw32* | cegcc*)
+ symcode='[[ABCDGISTW]]'
+ ;;
+hpux*)
+ if test ia64 = "$host_cpu"; then
+ symcode='[[ABCDEGRST]]'
+ fi
+ ;;
+irix* | nonstopux*)
+ symcode='[[BCDEGRST]]'
+ ;;
+osf*)
+ symcode='[[BCDEGQRST]]'
+ ;;
+solaris*)
+ symcode='[[BDRT]]'
+ ;;
+sco3.2v5*)
+ symcode='[[DT]]'
+ ;;
+sysv4.2uw2*)
+ symcode='[[DT]]'
+ ;;
+sysv5* | sco5v6* | unixware* | OpenUNIX*)
+ symcode='[[ABDT]]'
+ ;;
+sysv4)
+ symcode='[[DFNSTU]]'
+ ;;
+esac
+
+# If we're using GNU nm, then use its standard symbol codes.
+case `$NM -V 2>&1` in
+*GNU* | *'with BFD'*)
+ symcode='[[ABCDGIRSTW]]' ;;
+esac
+
+if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+ # Gets list of data symbols to import.
+ lt_cv_sys_global_symbol_to_import="sed -n -e 's/^I .* \(.*\)$/\1/p'"
+ # Adjust the below global symbol transforms to fixup imported variables.
+ lt_cdecl_hook=" -e 's/^I .* \(.*\)$/extern __declspec(dllimport) char \1;/p'"
+ lt_c_name_hook=" -e 's/^I .* \(.*\)$/ {\"\1\", (void *) 0},/p'"
+ lt_c_name_lib_hook="\
+ -e 's/^I .* \(lib.*\)$/ {\"\1\", (void *) 0},/p'\
+ -e 's/^I .* \(.*\)$/ {\"lib\1\", (void *) 0},/p'"
+else
+ # Disable hooks by default.
+ lt_cv_sys_global_symbol_to_import=
+ lt_cdecl_hook=
+ lt_c_name_hook=
+ lt_c_name_lib_hook=
+fi
+
+# Transform an extracted symbol line into a proper C declaration.
+# Some systems (esp. on ia64) link data and code symbols differently,
+# so use this general approach.
+lt_cv_sys_global_symbol_to_cdecl="sed -n"\
+$lt_cdecl_hook\
+" -e 's/^T .* \(.*\)$/extern int \1();/p'"\
+" -e 's/^$symcode$symcode* .* \(.*\)$/extern char \1;/p'"
+
+# Transform an extracted symbol line into symbol name and symbol address
+lt_cv_sys_global_symbol_to_c_name_address="sed -n"\
+$lt_c_name_hook\
+" -e 's/^: \(.*\) .*$/ {\"\1\", (void *) 0},/p'"\
+" -e 's/^$symcode$symcode* .* \(.*\)$/ {\"\1\", (void *) \&\1},/p'"
+
+# Transform an extracted symbol line into symbol name with lib prefix and
+# symbol address.
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n"\
+$lt_c_name_lib_hook\
+" -e 's/^: \(.*\) .*$/ {\"\1\", (void *) 0},/p'"\
+" -e 's/^$symcode$symcode* .* \(lib.*\)$/ {\"\1\", (void *) \&\1},/p'"\
+" -e 's/^$symcode$symcode* .* \(.*\)$/ {\"lib\1\", (void *) \&\1},/p'"
+
+# Handle CRLF in mingw tool chain
+opt_cr=
+case $build_os in
+mingw*)
+ opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp
+ ;;
+esac
+
+# Try without a prefix underscore, then with it.
+for ac_symprfx in "" "_"; do
+
+ # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
+ symxfrm="\\1 $ac_symprfx\\2 \\2"
+
+ # Write the raw and C identifiers.
+ if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+ # Fake it for dumpbin and say T for any non-static function,
+ # D for any global variable and I for any imported variable.
+ # Also find C++ and __fastcall symbols from MSVC++,
+ # which start with @ or ?.
+ lt_cv_sys_global_symbol_pipe="$AWK ['"\
+" {last_section=section; section=\$ 3};"\
+" /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\
+" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\
+" /^ *Symbol name *: /{split(\$ 0,sn,\":\"); si=substr(sn[2],2)};"\
+" /^ *Type *: code/{print \"T\",si,substr(si,length(prfx))};"\
+" /^ *Type *: data/{print \"I\",si,substr(si,length(prfx))};"\
+" \$ 0!~/External *\|/{next};"\
+" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\
+" {if(hide[section]) next};"\
+" {f=\"D\"}; \$ 0~/\(\).*\|/{f=\"T\"};"\
+" {split(\$ 0,a,/\||\r/); split(a[2],s)};"\
+" s[1]~/^[@?]/{print f,s[1],s[1]; next};"\
+" s[1]~prfx {split(s[1],t,\"@\"); print f,t[1],substr(t[1],length(prfx))}"\
+" ' prfx=^$ac_symprfx]"
+ else
+ lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
+ fi
+ lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'"
+
+ # Check to see that the pipe works correctly.
+ pipe_works=no
+
+ rm -f conftest*
+ cat > conftest.$ac_ext <<_LT_EOF
+#ifdef __cplusplus
+extern "C" {
+#endif
+char nm_test_var;
+void nm_test_func(void);
+void nm_test_func(void){}
+#ifdef __cplusplus
+}
+#endif
+int main(){nm_test_var='a';nm_test_func();return(0);}
+_LT_EOF
+
+ if AC_TRY_EVAL(ac_compile); then
+ # Now try to grab the symbols.
+ nlist=conftest.nm
+ if AC_TRY_EVAL(NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) && test -s "$nlist"; then
+ # Try sorting and uniquifying the output.
+ if sort "$nlist" | uniq > "$nlist"T; then
+ mv -f "$nlist"T "$nlist"
+ else
+ rm -f "$nlist"T
+ fi
+
+ # Make sure that we snagged all the symbols we need.
+ if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
+ if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
+ cat <<_LT_EOF > conftest.$ac_ext
+/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */
+#if defined _WIN32 || defined __CYGWIN__ || defined _WIN32_WCE
+/* DATA imports from DLLs on WIN32 can't be const, because runtime
+ relocations are performed -- see ld's documentation on pseudo-relocs. */
+# define LT@&t@_DLSYM_CONST
+#elif defined __osf__
+/* This system does not cope well with relocations in const data. */
+# define LT@&t@_DLSYM_CONST
+#else
+# define LT@&t@_DLSYM_CONST const
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+_LT_EOF
+ # Now generate the symbol file.
+ eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext'
+
+ cat <<_LT_EOF >> conftest.$ac_ext
+
+/* The mapping between symbol names and symbols. */
+LT@&t@_DLSYM_CONST struct {
+ const char *name;
+ void *address;
+}
+lt__PROGRAM__LTX_preloaded_symbols[[]] =
+{
+ { "@PROGRAM@", (void *) 0 },
+_LT_EOF
+ $SED "s/^$symcode$symcode* .* \(.*\)$/ {\"\1\", (void *) \&\1},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
+ cat <<\_LT_EOF >> conftest.$ac_ext
+ {0, (void *) 0}
+};
+
+/* This works around a problem in FreeBSD linker */
+#ifdef FREEBSD_WORKAROUND
+static const void *lt_preloaded_setup() {
+ return lt__PROGRAM__LTX_preloaded_symbols;
+}
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+_LT_EOF
+ # Now try linking the two files.
+ mv conftest.$ac_objext conftstm.$ac_objext
+ lt_globsym_save_LIBS=$LIBS
+ lt_globsym_save_CFLAGS=$CFLAGS
+ LIBS=conftstm.$ac_objext
+ CFLAGS="$CFLAGS$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)"
+ if AC_TRY_EVAL(ac_link) && test -s conftest$ac_exeext; then
+ pipe_works=yes
+ fi
+ LIBS=$lt_globsym_save_LIBS
+ CFLAGS=$lt_globsym_save_CFLAGS
+ else
+ echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD
+ fi
+ else
+ echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD
+ fi
+ else
+ echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD
+ fi
+ else
+ echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD
+ cat conftest.$ac_ext >&5
+ fi
+ rm -rf conftest* conftst*
+
+ # Do not use the global_symbol_pipe unless it works.
+ if test yes = "$pipe_works"; then
+ break
+ else
+ lt_cv_sys_global_symbol_pipe=
+ fi
+done
+])
+if test -z "$lt_cv_sys_global_symbol_pipe"; then
+ lt_cv_sys_global_symbol_to_cdecl=
+fi
+if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
+ AC_MSG_RESULT(failed)
+else
+ AC_MSG_RESULT(ok)
+fi
+
+# Response file support.
+if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+ nm_file_list_spec='@'
+elif $NM --help 2>/dev/null | grep '[[@]]FILE' >/dev/null; then
+ nm_file_list_spec='@'
+fi
+
+_LT_DECL([global_symbol_pipe], [lt_cv_sys_global_symbol_pipe], [1],
+ [Take the output of nm and produce a listing of raw symbols and C names])
+_LT_DECL([global_symbol_to_cdecl], [lt_cv_sys_global_symbol_to_cdecl], [1],
+ [Transform the output of nm in a proper C declaration])
+_LT_DECL([global_symbol_to_import], [lt_cv_sys_global_symbol_to_import], [1],
+ [Transform the output of nm into a list of symbols to manually relocate])
+_LT_DECL([global_symbol_to_c_name_address],
+ [lt_cv_sys_global_symbol_to_c_name_address], [1],
+ [Transform the output of nm in a C name address pair])
+_LT_DECL([global_symbol_to_c_name_address_lib_prefix],
+ [lt_cv_sys_global_symbol_to_c_name_address_lib_prefix], [1],
+ [Transform the output of nm in a C name address pair when lib prefix is needed])
+_LT_DECL([nm_interface], [lt_cv_nm_interface], [1],
+ [The name lister interface])
+_LT_DECL([], [nm_file_list_spec], [1],
+ [Specify filename containing input files for $NM])
+]) # _LT_CMD_GLOBAL_SYMBOLS
+
+
+# _LT_COMPILER_PIC([TAGNAME])
+# ---------------------------
+m4_defun([_LT_COMPILER_PIC],
+[m4_require([_LT_TAG_COMPILER])dnl
+_LT_TAGVAR(lt_prog_compiler_wl, $1)=
+_LT_TAGVAR(lt_prog_compiler_pic, $1)=
+_LT_TAGVAR(lt_prog_compiler_static, $1)=
+
+m4_if([$1], [CXX], [
+ # C++ specific cases for pic, static, wl, etc.
+ if test yes = "$GXX"; then
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+
+ case $host_os in
+ aix*)
+ # All AIX code is PIC.
+ if test ia64 = "$host_cpu"; then
+ # AIX 5 now supports IA64 processor
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ fi
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ ;;
+
+ amigaos*)
+ case $host_cpu in
+ powerpc)
+ # see comment about AmigaOS4 .so support
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ ;;
+ m68k)
+ # FIXME: we need at least 68020 code to build shared libraries, but
+ # adding the '-m68020' flag to GCC prevents building anything better,
+ # like '-m68040'.
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
+ ;;
+ esac
+ ;;
+
+ beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+ # PIC is the default for these OSes.
+ ;;
+ mingw* | cygwin* | os2* | pw32* | cegcc*)
+ # This hack is so that the source file can tell whether it is being
+ # built for inclusion in a dll (and should export symbols for example).
+ # Although the cygwin gcc ignores -fPIC, still need this for old-style
+ # (--disable-auto-import) libraries
+ m4_if([$1], [GCJ], [],
+ [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
+ case $host_os in
+ os2*)
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-static'
+ ;;
+ esac
+ ;;
+ darwin* | rhapsody*)
+ # PIC is the default on this platform
+ # Common symbols not allowed in MH_DYLIB files
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
+ ;;
+ *djgpp*)
+ # DJGPP does not support shared libraries at all
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)=
+ ;;
+ haiku*)
+ # PIC is the default for Haiku.
+ # The "-static" flag exists, but is broken.
+ _LT_TAGVAR(lt_prog_compiler_static, $1)=
+ ;;
+ interix[[3-9]]*)
+ # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+ # Instead, we relocate shared libraries at runtime.
+ ;;
+ sysv4*MP*)
+ if test -d /usr/nec; then
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
+ fi
+ ;;
+ hpux*)
+ # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
+ # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag
+ # sets the default TLS model and affects inlining.
+ case $host_cpu in
+ hppa*64*)
+ ;;
+ *)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ ;;
+ esac
+ ;;
+ *qnx* | *nto*)
+ # QNX uses GNU C++, but need to define -shared option too, otherwise
+ # it will coredump.
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
+ ;;
+ *)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ ;;
+ esac
+ else
+ case $host_os in
+ aix[[4-9]]*)
+ # All AIX code is PIC.
+ if test ia64 = "$host_cpu"; then
+ # AIX 5 now supports IA64 processor
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ else
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
+ fi
+ ;;
+ chorus*)
+ case $cc_basename in
+ cxch68*)
+ # Green Hills C++ Compiler
+ # _LT_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
+ ;;
+ esac
+ ;;
+ mingw* | cygwin* | os2* | pw32* | cegcc*)
+ # This hack is so that the source file can tell whether it is being
+ # built for inclusion in a dll (and should export symbols for example).
+ m4_if([$1], [GCJ], [],
+ [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
+ ;;
+ dgux*)
+ case $cc_basename in
+ ec++*)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ ;;
+ ghcx*)
+ # Green Hills C++ Compiler
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ freebsd* | dragonfly*)
+ # FreeBSD uses GNU C++
+ ;;
+ hpux9* | hpux10* | hpux11*)
+ case $cc_basename in
+ CC*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-a ${wl}archive'
+ if test ia64 != "$host_cpu"; then
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
+ fi
+ ;;
+ aCC*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-a ${wl}archive'
+ case $host_cpu in
+ hppa*64*|ia64*)
+ # +Z the default
+ ;;
+ *)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
+ ;;
+ esac
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ interix*)
+ # This is c89, which is MS Visual C++ (no shared libs)
+ # Anyone wants to do a port?
+ ;;
+ irix5* | irix6* | nonstopux*)
+ case $cc_basename in
+ CC*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+ # CC pic flag -KPIC is the default.
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
+ case $cc_basename in
+ KCC*)
+ # KAI C++ Compiler
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ ;;
+ ecpc* )
+ # old Intel C++ for x86_64, which still supported -KPIC.
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+ ;;
+ icpc* )
+ # Intel C++, used to be incompatible with GCC.
+ # ICC 10 doesn't accept -KPIC any more.
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+ ;;
+ pgCC* | pgcpp*)
+ # Portland Group C++ compiler
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+ cxx*)
+ # Compaq C++
+ # Make sure the PIC flag is empty. It appears that all Alpha
+ # Linux and Compaq Tru64 Unix objects are PIC.
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)=
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+ ;;
+ xlc* | xlC* | bgxl[[cC]]* | mpixl[[cC]]*)
+ # IBM XL 8.0, 9.0 on PPC and BlueGene
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink'
+ ;;
+ *)
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ C*)
+ # Sun C++ 5.9
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
+ ;;
+ esac
+ ;;
+ esac
+ ;;
+ lynxos*)
+ ;;
+ m88k*)
+ ;;
+ mvs*)
+ case $cc_basename in
+ cxx*)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall'
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ netbsd*)
+ ;;
+ *qnx* | *nto*)
+ # QNX uses GNU C++, but need to define -shared option too, otherwise
+ # it will coredump.
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
+ ;;
+ osf3* | osf4* | osf5*)
+ case $cc_basename in
+ KCC*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
+ ;;
+ RCC*)
+ # Rational C++ 2.4.1
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+ ;;
+ cxx*)
+ # Digital/Compaq C++
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ # Make sure the PIC flag is empty. It appears that all Alpha
+ # Linux and Compaq Tru64 Unix objects are PIC.
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)=
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ psos*)
+ ;;
+ solaris*)
+ case $cc_basename in
+ CC* | sunCC*)
+ # Sun C++ 4.2, 5.x and Centerline C++
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
+ ;;
+ gcx*)
+ # Green Hills C++ Compiler
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ sunos4*)
+ case $cc_basename in
+ CC*)
+ # Sun C++ 4.x
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+ lcc*)
+ # Lucid
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+ case $cc_basename in
+ CC*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+ esac
+ ;;
+ tandem*)
+ case $cc_basename in
+ NCC*)
+ # NonStop-UX NCC 3.20
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ vxworks*)
+ ;;
+ *)
+ _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+ ;;
+ esac
+ fi
+],
+[
+ if test yes = "$GCC"; then
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+
+ case $host_os in
+ aix*)
+ # All AIX code is PIC.
+ if test ia64 = "$host_cpu"; then
+ # AIX 5 now supports IA64 processor
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ fi
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ ;;
+
+ amigaos*)
+ case $host_cpu in
+ powerpc)
+ # see comment about AmigaOS4 .so support
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ ;;
+ m68k)
+ # FIXME: we need at least 68020 code to build shared libraries, but
+ # adding the '-m68020' flag to GCC prevents building anything better,
+ # like '-m68040'.
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
+ ;;
+ esac
+ ;;
+
+ beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+ # PIC is the default for these OSes.
+ ;;
+
+ mingw* | cygwin* | pw32* | os2* | cegcc*)
+ # This hack is so that the source file can tell whether it is being
+ # built for inclusion in a dll (and should export symbols for example).
+ # Although the cygwin gcc ignores -fPIC, still need this for old-style
+ # (--disable-auto-import) libraries
+ m4_if([$1], [GCJ], [],
+ [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
+ case $host_os in
+ os2*)
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-static'
+ ;;
+ esac
+ ;;
+
+ darwin* | rhapsody*)
+ # PIC is the default on this platform
+ # Common symbols not allowed in MH_DYLIB files
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
+ ;;
+
+ haiku*)
+ # PIC is the default for Haiku.
+ # The "-static" flag exists, but is broken.
+ _LT_TAGVAR(lt_prog_compiler_static, $1)=
+ ;;
+
+ hpux*)
+ # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
+ # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag
+ # sets the default TLS model and affects inlining.
+ case $host_cpu in
+ hppa*64*)
+ # +Z the default
+ ;;
+ *)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ ;;
+ esac
+ ;;
+
+ interix[[3-9]]*)
+ # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+ # Instead, we relocate shared libraries at runtime.
+ ;;
+
+ msdosdjgpp*)
+ # Just because we use GCC doesn't mean we suddenly get shared libraries
+ # on systems that don't support them.
+ _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+ enable_shared=no
+ ;;
+
+ *nto* | *qnx*)
+ # QNX uses GNU C++, but need to define -shared option too, otherwise
+ # it will coredump.
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
+ ;;
+
+ sysv4*MP*)
+ if test -d /usr/nec; then
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
+ fi
+ ;;
+
+ *)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ ;;
+ esac
+
+ case $cc_basename in
+ nvcc*) # Cuda Compiler Driver 2.2
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Xlinker '
+ if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)="-Xcompiler $_LT_TAGVAR(lt_prog_compiler_pic, $1)"
+ fi
+ ;;
+ esac
+ else
+ # PORTME Check for flag to pass linker flags through the system compiler.
+ case $host_os in
+ aix*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ if test ia64 = "$host_cpu"; then
+ # AIX 5 now supports IA64 processor
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ else
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
+ fi
+ ;;
+
+ darwin* | rhapsody*)
+ # PIC is the default on this platform
+ # Common symbols not allowed in MH_DYLIB files
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
+ case $cc_basename in
+ nagfor*)
+ # NAG Fortran compiler
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,-Wl,,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+ esac
+ ;;
+
+ mingw* | cygwin* | pw32* | os2* | cegcc*)
+ # This hack is so that the source file can tell whether it is being
+ # built for inclusion in a dll (and should export symbols for example).
+ m4_if([$1], [GCJ], [],
+ [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
+ case $host_os in
+ os2*)
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-static'
+ ;;
+ esac
+ ;;
+
+ hpux9* | hpux10* | hpux11*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+ # not for PA HP-UX.
+ case $host_cpu in
+ hppa*64*|ia64*)
+ # +Z the default
+ ;;
+ *)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
+ ;;
+ esac
+ # Is there a better lt_prog_compiler_static that works with the bundled CC?
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-a ${wl}archive'
+ ;;
+
+ irix5* | irix6* | nonstopux*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ # PIC (with -KPIC) is the default.
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+ ;;
+
+ linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
+ case $cc_basename in
+ # old Intel for x86_64, which still supported -KPIC.
+ ecc*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+ ;;
+ # icc used to be incompatible with GCC.
+ # ICC 10 doesn't accept -KPIC any more.
+ icc* | ifort*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+ ;;
+ # Lahey Fortran 8.1.
+ lf95*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='--shared'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='--static'
+ ;;
+ nagfor*)
+ # NAG Fortran compiler
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,-Wl,,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+ tcc*)
+ # Fabrice Bellard et al's Tiny C Compiler
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+ ;;
+ pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
+ # Portland Group compilers (*not* the Pentium gcc compiler,
+ # which looks to be a dead project)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+ ccc*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ # All Alpha code is PIC.
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+ ;;
+ xl* | bgxl* | bgf* | mpixl*)
+ # IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink'
+ ;;
+ *)
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [[1-7]].* | *Sun*Fortran*\ 8.[[0-3]]*)
+ # Sun Fortran 8.3 passes all unrecognized flags to the linker
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)=''
+ ;;
+ *Sun\ F* | *Sun*Fortran*)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
+ ;;
+ *Sun\ C*)
+ # Sun C 5.9
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ ;;
+ *Intel*\ [[CF]]*Compiler*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+ ;;
+ *Portland\ Group*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+ esac
+ ;;
+ esac
+ ;;
+
+ newsos6)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+
+ *nto* | *qnx*)
+ # QNX uses GNU C++, but need to define -shared option too, otherwise
+ # it will coredump.
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
+ ;;
+
+ osf3* | osf4* | osf5*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ # All OSF/1 code is PIC.
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+ ;;
+
+ rdos*)
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+ ;;
+
+ solaris*)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ case $cc_basename in
+ f77* | f90* | f95* | sunf77* | sunf90* | sunf95*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';;
+ *)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';;
+ esac
+ ;;
+
+ sunos4*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+
+ sysv4 | sysv4.2uw2* | sysv4.3*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+
+ sysv4*MP*)
+ if test -d /usr/nec; then
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ fi
+ ;;
+
+ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+
+ unicos*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+ ;;
+
+ uts4*)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+
+ *)
+ _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+ ;;
+ esac
+ fi
+])
+case $host_os in
+ # For platforms that do not support PIC, -DPIC is meaningless:
+ *djgpp*)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)=
+ ;;
+ *)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])"
+ ;;
+esac
+
+AC_CACHE_CHECK([for $compiler option to produce PIC],
+ [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)],
+ [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_prog_compiler_pic, $1)])
+_LT_TAGVAR(lt_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)
+
+#
+# Check to make sure the PIC flag actually works.
+#
+if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then
+ _LT_COMPILER_OPTION([if $compiler PIC flag $_LT_TAGVAR(lt_prog_compiler_pic, $1) works],
+ [_LT_TAGVAR(lt_cv_prog_compiler_pic_works, $1)],
+ [$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])], [],
+ [case $_LT_TAGVAR(lt_prog_compiler_pic, $1) in
+ "" | " "*) ;;
+ *) _LT_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_TAGVAR(lt_prog_compiler_pic, $1)" ;;
+ esac],
+ [_LT_TAGVAR(lt_prog_compiler_pic, $1)=
+ _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no])
+fi
+_LT_TAGDECL([pic_flag], [lt_prog_compiler_pic], [1],
+ [Additional compiler flags for building library objects])
+
+_LT_TAGDECL([wl], [lt_prog_compiler_wl], [1],
+ [How to pass a linker flag through the compiler])
+#
+# Check to make sure the static flag actually works.
+#
+wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_TAGVAR(lt_prog_compiler_static, $1)\"
+_LT_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works],
+ _LT_TAGVAR(lt_cv_prog_compiler_static_works, $1),
+ $lt_tmp_static_flag,
+ [],
+ [_LT_TAGVAR(lt_prog_compiler_static, $1)=])
+_LT_TAGDECL([link_static_flag], [lt_prog_compiler_static], [1],
+ [Compiler flag to prevent dynamic linking])
+])# _LT_COMPILER_PIC
+
+
+# _LT_LINKER_SHLIBS([TAGNAME])
+# ----------------------------
+# See if the linker supports building shared libraries.
+m4_defun([_LT_LINKER_SHLIBS],
+[AC_REQUIRE([LT_PATH_LD])dnl
+AC_REQUIRE([LT_PATH_NM])dnl
+m4_require([_LT_PATH_MANIFEST_TOOL])dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_EGREP])dnl
+m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
+m4_require([_LT_TAG_COMPILER])dnl
+AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
+m4_if([$1], [CXX], [
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+ _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
+ case $host_os in
+ aix[[4-9]]*)
+ # If we're using GNU nm, then we don't want the "-C" option.
+ # -C means demangle to GNU nm, but means don't demangle to AIX nm.
+ # Without the "-l" option, or with the "-B" option, AIX nm treats
+ # weak defined symbols like other global defined symbols, whereas
+ # GNU nm marks them as "W".
+ # While the 'weak' keyword is ignored in the Export File, we need
+ # it in the Import File for the 'aix-soname' feature, so we have
+ # to replace the "-B" option with "-P" for AIX nm.
+ if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { if (\$ 2 == "W") { print \$ 3 " weak" } else { print \$ 3 } } }'\'' | sort -u > $export_symbols'
+ else
+ _LT_TAGVAR(export_symbols_cmds, $1)='`func_echo_all $NM | $SED -e '\''s/B\([[^B]]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && ([substr](\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols'
+ fi
+ ;;
+ pw32*)
+ _LT_TAGVAR(export_symbols_cmds, $1)=$ltdll_cmds
+ ;;
+ cygwin* | mingw* | cegcc*)
+ case $cc_basename in
+ cl*)
+ _LT_TAGVAR(exclude_expsyms, $1)='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*'
+ ;;
+ *)
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols'
+ _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname']
+ ;;
+ esac
+ ;;
+ *)
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+ ;;
+ esac
+], [
+ runpath_var=
+ _LT_TAGVAR(allow_undefined_flag, $1)=
+ _LT_TAGVAR(always_export_symbols, $1)=no
+ _LT_TAGVAR(archive_cmds, $1)=
+ _LT_TAGVAR(archive_expsym_cmds, $1)=
+ _LT_TAGVAR(compiler_needs_object, $1)=no
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)=
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+ _LT_TAGVAR(hardcode_automatic, $1)=no
+ _LT_TAGVAR(hardcode_direct, $1)=no
+ _LT_TAGVAR(hardcode_direct_absolute, $1)=no
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=
+ _LT_TAGVAR(hardcode_minus_L, $1)=no
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+ _LT_TAGVAR(inherit_rpath, $1)=no
+ _LT_TAGVAR(link_all_deplibs, $1)=unknown
+ _LT_TAGVAR(module_cmds, $1)=
+ _LT_TAGVAR(module_expsym_cmds, $1)=
+ _LT_TAGVAR(old_archive_from_new_cmds, $1)=
+ _LT_TAGVAR(old_archive_from_expsyms_cmds, $1)=
+ _LT_TAGVAR(thread_safe_flag_spec, $1)=
+ _LT_TAGVAR(whole_archive_flag_spec, $1)=
+ # include_expsyms should be a list of space-separated symbols to be *always*
+ # included in the symbol list
+ _LT_TAGVAR(include_expsyms, $1)=
+ # exclude_expsyms can be an extended regexp of symbols to exclude
+ # it will be wrapped by ' (' and ')$', so one must not match beginning or
+ # end of line. Example: 'a|bc|.*d.*' will exclude the symbols 'a' and 'bc',
+ # as well as any symbol that contains 'd'.
+ _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
+ # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
+ # platforms (ab)use it in PIC code, but their linkers get confused if
+ # the symbol is explicitly referenced. Since portable code cannot
+ # rely on this symbol name, it's probably fine to never include it in
+ # preloaded symbol tables.
+ # Exclude shared library initialization/finalization symbols.
+dnl Note also adjust exclude_expsyms for C++ above.
+ extract_expsyms_cmds=
+
+ case $host_os in
+ cygwin* | mingw* | pw32* | cegcc*)
+ # FIXME: the MSVC++ port hasn't been tested in a loooong time
+ # When not using gcc, we currently assume that we are using
+ # Microsoft Visual C++.
+ if test yes != "$GCC"; then
+ with_gnu_ld=no
+ fi
+ ;;
+ interix*)
+ # we just hope/assume this is gcc and not c89 (= MSVC++)
+ with_gnu_ld=yes
+ ;;
+ openbsd* | bitrig*)
+ with_gnu_ld=no
+ ;;
+ esac
+
+ _LT_TAGVAR(ld_shlibs, $1)=yes
+
+ # On some targets, GNU ld is compatible enough with the native linker
+ # that we're better off using the native interface for both.
+ lt_use_gnu_ld_interface=no
+ if test yes = "$with_gnu_ld"; then
+ case $host_os in
+ aix*)
+ # The AIX port of GNU ld has always aspired to compatibility
+ # with the native linker. However, as the warning in the GNU ld
+ # block says, versions before 2.19.5* couldn't really create working
+ # shared libraries, regardless of the interface used.
+ case `$LD -v 2>&1` in
+ *\ \(GNU\ Binutils\)\ 2.19.5*) ;;
+ *\ \(GNU\ Binutils\)\ 2.[[2-9]]*) ;;
+ *\ \(GNU\ Binutils\)\ [[3-9]]*) ;;
+ *)
+ lt_use_gnu_ld_interface=yes
+ ;;
+ esac
+ ;;
+ *)
+ lt_use_gnu_ld_interface=yes
+ ;;
+ esac
+ fi
+
+ if test yes = "$lt_use_gnu_ld_interface"; then
+ # If archive_cmds runs LD, not CC, wlarc should be empty
+ wlarc='$wl'
+
+ # Set some defaults for GNU ld with shared library support. These
+ # are reset later if shared libraries are not supported. Putting them
+ # here allows them to be overridden if necessary.
+ runpath_var=LD_RUN_PATH
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic'
+ # ancient GNU ld didn't support --whole-archive et. al.
+ if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
+ _LT_TAGVAR(whole_archive_flag_spec, $1)=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive'
+ else
+ _LT_TAGVAR(whole_archive_flag_spec, $1)=
+ fi
+ supports_anon_versioning=no
+ case `$LD -v | $SED -e 's/([^)]\+)\s\+//' 2>&1` in
+ *GNU\ gold*) supports_anon_versioning=yes ;;
+ *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11
+ *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
+ *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
+ *\ 2.11.*) ;; # other 2.11 versions
+ *) supports_anon_versioning=yes ;;
+ esac
+
+ # See if GNU ld supports shared libraries.
+ case $host_os in
+ aix[[3-9]]*)
+ # On AIX/PPC, the GNU linker is very broken
+ if test ia64 != "$host_cpu"; then
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ cat <<_LT_EOF 1>&2
+
+*** Warning: the GNU linker, at least up to release 2.19, is reported
+*** to be unable to reliably create shared libraries on AIX.
+*** Therefore, libtool is disabling shared libraries support. If you
+*** really care for shared libraries, you may want to install binutils
+*** 2.20 or above, or modify your PATH so that a non-GNU linker is found.
+*** You will then need to restart the configuration process.
+
+_LT_EOF
+ fi
+ ;;
+
+ amigaos*)
+ case $host_cpu in
+ powerpc)
+ # see comment about AmigaOS4 .so support
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)=''
+ ;;
+ m68k)
+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ ;;
+ esac
+ ;;
+
+ beos*)
+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+ # support --undefined. This deserves some investigation. FIXME
+ _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+
+ cygwin* | mingw* | pw32* | cegcc*)
+ # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
+ # as there is no search path for DLLs.
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-all-symbols'
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ _LT_TAGVAR(always_export_symbols, $1)=no
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols'
+ _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname']
+
+ if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ # If the export-symbols file already is a .def file, use it as
+ # is; otherwise, prepend EXPORTS...
+ _LT_TAGVAR(archive_expsym_cmds, $1)='if _LT_DLL_DEF_P([$export_symbols]); then
+ cp $export_symbols $output_objdir/$soname.def;
+ else
+ echo EXPORTS > $output_objdir/$soname.def;
+ cat $export_symbols >> $output_objdir/$soname.def;
+ fi~
+ $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+
+ haiku*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ ;;
+
+ os2*)
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ shrext_cmds=.dll
+ _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+ $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+ $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+ $ECHO EXPORTS >> $output_objdir/$libname.def~
+ emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~
+ $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+ emximp -o $lib $output_objdir/$libname.def'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+ $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+ $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+ $ECHO EXPORTS >> $output_objdir/$libname.def~
+ prefix_cmds="$SED"~
+ if test EXPORTS = "`$SED 1q $export_symbols`"; then
+ prefix_cmds="$prefix_cmds -e 1d";
+ fi~
+ prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~
+ cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~
+ $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+ emximp -o $lib $output_objdir/$libname.def'
+ _LT_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def'
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+ ;;
+
+ interix[[3-9]]*)
+ _LT_TAGVAR(hardcode_direct, $1)=no
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
+ # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+ # Instead, shared libraries are loaded at an image base (0x10000000 by
+ # default) and relocated if they conflict, which is a slow very memory
+ # consuming and fragmenting process. To avoid this, we pick a random,
+ # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+ # time. Moving up from 0x10000000 also allows more sbrk(2) space.
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--retain-symbols-file,$output_objdir/$soname.expsym $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ ;;
+
+ gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu)
+ tmp_diet=no
+ if test linux-dietlibc = "$host_os"; then
+ case $cc_basename in
+ diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn)
+ esac
+ fi
+ if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
+ && test no = "$tmp_diet"
+ then
+ tmp_addflag=' $pic_flag'
+ tmp_sharedflag='-shared'
+ case $cc_basename,$host_cpu in
+ pgcc*) # Portland Group C compiler
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
+ tmp_addflag=' $pic_flag'
+ ;;
+ pgf77* | pgf90* | pgf95* | pgfortran*)
+ # Portland Group f77 and f90 compilers
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
+ tmp_addflag=' $pic_flag -Mnomain' ;;
+ ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64
+ tmp_addflag=' -i_dynamic' ;;
+ efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64
+ tmp_addflag=' -i_dynamic -nofor_main' ;;
+ ifc* | ifort*) # Intel Fortran compiler
+ tmp_addflag=' -nofor_main' ;;
+ lf95*) # Lahey Fortran 8.1
+ _LT_TAGVAR(whole_archive_flag_spec, $1)=
+ tmp_sharedflag='--shared' ;;
+ nagfor*) # NAGFOR 5.3
+ tmp_sharedflag='-Wl,-shared' ;;
+ xl[[cC]]* | bgxl[[cC]]* | mpixl[[cC]]*) # IBM XL C 8.0 on PPC (deal with xlf below)
+ tmp_sharedflag='-qmkshrobj'
+ tmp_addflag= ;;
+ nvcc*) # Cuda Compiler Driver 2.2
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
+ _LT_TAGVAR(compiler_needs_object, $1)=yes
+ ;;
+ esac
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ C*) # Sun C 5.9
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
+ _LT_TAGVAR(compiler_needs_object, $1)=yes
+ tmp_sharedflag='-G' ;;
+ *Sun\ F*) # Sun Fortran 8.3
+ tmp_sharedflag='-G' ;;
+ esac
+ _LT_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+
+ if test yes = "$supports_anon_versioning"; then
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+ echo "local: *; };" >> $output_objdir/$libname.ver~
+ $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-version-script $wl$output_objdir/$libname.ver -o $lib'
+ fi
+
+ case $cc_basename in
+ tcc*)
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='-rdynamic'
+ ;;
+ xlf* | bgf* | bgxlf* | mpixlf*)
+ # IBM XL Fortran 10.1 on PPC cannot create shared libs itself
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience --no-whole-archive'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
+ _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib'
+ if test yes = "$supports_anon_versioning"; then
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+ echo "local: *; };" >> $output_objdir/$libname.ver~
+ $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
+ fi
+ ;;
+ esac
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+
+ netbsd*)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
+ wlarc=
+ else
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
+ fi
+ ;;
+
+ solaris*)
+ if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ cat <<_LT_EOF 1>&2
+
+*** Warning: The releases 2.8.* of the GNU linker cannot reliably
+*** create shared libraries on Solaris systems. Therefore, libtool
+*** is disabling shared libraries support. We urge you to upgrade GNU
+*** binutils to release 2.9.1 or newer. Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+ elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+
+ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
+ case `$LD -v 2>&1` in
+ *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*)
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ cat <<_LT_EOF 1>&2
+
+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 cannot
+*** reliably create shared libraries on SCO systems. Therefore, libtool
+*** is disabling shared libraries support. We urge you to upgrade GNU
+*** binutils to release 2.16.91.0.3 or newer. Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+ ;;
+ *)
+ # For security reasons, it is highly recommended that you always
+ # use absolute paths for naming shared libraries, and exclude the
+ # DT_RUNPATH tag from executables and libraries. But doing so
+ # requires that you compile everything twice, which is a pain.
+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+ esac
+ ;;
+
+ sunos4*)
+ _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+ wlarc=
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+
+ *)
+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+ esac
+
+ if test no = "$_LT_TAGVAR(ld_shlibs, $1)"; then
+ runpath_var=
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)=
+ _LT_TAGVAR(whole_archive_flag_spec, $1)=
+ fi
+ else
+ # PORTME fill in a description of your system's linker (not GNU ld)
+ case $host_os in
+ aix3*)
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ _LT_TAGVAR(always_export_symbols, $1)=yes
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
+ # Note: this linker hardcodes the directories in LIBPATH if there
+ # are no directories specified by -L.
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ if test yes = "$GCC" && test -z "$lt_prog_compiler_static"; then
+ # Neither direct hardcoding nor static linking is supported with a
+ # broken collect2.
+ _LT_TAGVAR(hardcode_direct, $1)=unsupported
+ fi
+ ;;
+
+ aix[[4-9]]*)
+ if test ia64 = "$host_cpu"; then
+ # On IA64, the linker does run time linking by default, so we don't
+ # have to do anything special.
+ aix_use_runtimelinking=no
+ exp_sym_flag='-Bexport'
+ no_entry_flag=
+ else
+ # If we're using GNU nm, then we don't want the "-C" option.
+ # -C means demangle to GNU nm, but means don't demangle to AIX nm.
+ # Without the "-l" option, or with the "-B" option, AIX nm treats
+ # weak defined symbols like other global defined symbols, whereas
+ # GNU nm marks them as "W".
+ # While the 'weak' keyword is ignored in the Export File, we need
+ # it in the Import File for the 'aix-soname' feature, so we have
+ # to replace the "-B" option with "-P" for AIX nm.
+ if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { if (\$ 2 == "W") { print \$ 3 " weak" } else { print \$ 3 } } }'\'' | sort -u > $export_symbols'
+ else
+ _LT_TAGVAR(export_symbols_cmds, $1)='`func_echo_all $NM | $SED -e '\''s/B\([[^B]]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && ([substr](\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols'
+ fi
+ aix_use_runtimelinking=no
+
+ # Test if we are trying to use run time linking or normal
+ # AIX style linking. If -brtl is somewhere in LDFLAGS, we
+ # have runtime linking enabled, and use it for executables.
+ # For shared libraries, we enable/disable runtime linking
+ # depending on the kind of the shared library created -
+ # when "with_aix_soname,aix_use_runtimelinking" is:
+ # "aix,no" lib.a(lib.so.V) shared, rtl:no, for executables
+ # "aix,yes" lib.so shared, rtl:yes, for executables
+ # lib.a static archive
+ # "both,no" lib.so.V(shr.o) shared, rtl:yes
+ # lib.a(lib.so.V) shared, rtl:no, for executables
+ # "both,yes" lib.so.V(shr.o) shared, rtl:yes, for executables
+ # lib.a(lib.so.V) shared, rtl:no
+ # "svr4,*" lib.so.V(shr.o) shared, rtl:yes, for executables
+ # lib.a static archive
+ case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
+ for ld_flag in $LDFLAGS; do
+ if (test x-brtl = "x$ld_flag" || test x-Wl,-brtl = "x$ld_flag"); then
+ aix_use_runtimelinking=yes
+ break
+ fi
+ done
+ if test svr4,no = "$with_aix_soname,$aix_use_runtimelinking"; then
+ # With aix-soname=svr4, we create the lib.so.V shared archives only,
+ # so we don't have lib.a shared libs to link our executables.
+ # We have to force runtime linking in this case.
+ aix_use_runtimelinking=yes
+ LDFLAGS="$LDFLAGS -Wl,-brtl"
+ fi
+ ;;
+ esac
+
+ exp_sym_flag='-bexport'
+ no_entry_flag='-bnoentry'
+ fi
+
+ # When large executables or shared objects are built, AIX ld can
+ # have problems creating the table of contents. If linking a library
+ # or program results in "error TOC overflow" add -mminimal-toc to
+ # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
+ # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+ _LT_TAGVAR(archive_cmds, $1)=''
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ _LT_TAGVAR(file_list_spec, $1)='$wl-f,'
+ case $with_aix_soname,$aix_use_runtimelinking in
+ aix,*) ;; # traditional, no import file
+ svr4,* | *,yes) # use import file
+ # The Import File defines what to hardcode.
+ _LT_TAGVAR(hardcode_direct, $1)=no
+ _LT_TAGVAR(hardcode_direct_absolute, $1)=no
+ ;;
+ esac
+
+ if test yes = "$GCC"; then
+ case $host_os in aix4.[[012]]|aix4.[[012]].*)
+ # We only want to do this on AIX 4.2 and lower, the check
+ # below for broken collect2 doesn't work under 4.3+
+ collect2name=`$CC -print-prog-name=collect2`
+ if test -f "$collect2name" &&
+ strings "$collect2name" | $GREP resolve_lib_name >/dev/null
+ then
+ # We have reworked collect2
+ :
+ else
+ # We have old collect2
+ _LT_TAGVAR(hardcode_direct, $1)=unsupported
+ # It fails to find uninstalled libraries when the uninstalled
+ # path is not listed in the libpath. Setting hardcode_minus_L
+ # to unsupported forces relinking
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=
+ fi
+ ;;
+ esac
+ shared_flag='-shared'
+ if test yes = "$aix_use_runtimelinking"; then
+ shared_flag="$shared_flag "'$wl-G'
+ fi
+ # Need to ensure runtime linking is disabled for the traditional
+ # shared library, or the linker may eventually find shared libraries
+ # /with/ Import File - we do not want to mix them.
+ shared_flag_aix='-shared'
+ shared_flag_svr4='-shared $wl-G'
+ else
+ # not using gcc
+ if test ia64 = "$host_cpu"; then
+ # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+ # chokes on -Wl,-G. The following line is correct:
+ shared_flag='-G'
+ else
+ if test yes = "$aix_use_runtimelinking"; then
+ shared_flag='$wl-G'
+ else
+ shared_flag='$wl-bM:SRE'
+ fi
+ shared_flag_aix='$wl-bM:SRE'
+ shared_flag_svr4='$wl-G'
+ fi
+ fi
+
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-bexpall'
+ # It seems that -bexpall does not export symbols beginning with
+ # underscore (_), so it is better to generate a list of symbols to export.
+ _LT_TAGVAR(always_export_symbols, $1)=yes
+ if test aix,yes = "$with_aix_soname,$aix_use_runtimelinking"; then
+ # Warning - without using the other runtime loading flags (-brtl),
+ # -berok will link without error, but may produce a broken library.
+ _LT_TAGVAR(allow_undefined_flag, $1)='-berok'
+ # Determine the default libpath from the value encoded in an
+ # empty executable.
+ _LT_SYS_MODULE_PATH_AIX([$1])
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-blibpath:$libdir:'"$aix_libpath"
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs $wl'$no_entry_flag' $compiler_flags `if test -n "$allow_undefined_flag"; then func_echo_all "$wl$allow_undefined_flag"; else :; fi` $wl'$exp_sym_flag:\$export_symbols' '$shared_flag
+ else
+ if test ia64 = "$host_cpu"; then
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R $libdir:/usr/lib:/lib'
+ _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
+ _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\$wl$no_entry_flag"' $compiler_flags $wl$allow_undefined_flag '"\$wl$exp_sym_flag:\$export_symbols"
+ else
+ # Determine the default libpath from the value encoded in an
+ # empty executable.
+ _LT_SYS_MODULE_PATH_AIX([$1])
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-blibpath:$libdir:'"$aix_libpath"
+ # Warning - without using the other run time loading flags,
+ # -berok will link without error, but may produce a broken library.
+ _LT_TAGVAR(no_undefined_flag, $1)=' $wl-bernotok'
+ _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-berok'
+ if test yes = "$with_gnu_ld"; then
+ # We only use this code for GNU lds that support --whole-archive.
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive$convenience $wl--no-whole-archive'
+ else
+ # Exported symbols can be pulled into shared objects from archives
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
+ fi
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$RM -r $output_objdir/$realname.d~$MKDIR $output_objdir/$realname.d'
+ # -brtl affects multiple linker settings, -berok does not and is overridden later
+ compiler_flags_filtered='`func_echo_all "$compiler_flags " | $SED -e "s%-brtl\\([[, ]]\\)%-berok\\1%g"`'
+ if test svr4 != "$with_aix_soname"; then
+ # This is similar to how AIX traditionally builds its shared libraries.
+ _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$CC '$shared_flag_aix' -o $output_objdir/$realname.d/$soname $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$realname.d/$soname'
+ fi
+ if test aix != "$with_aix_soname"; then
+ _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$CC '$shared_flag_svr4' -o $output_objdir/$realname.d/$shared_archive_member_spec.o $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$STRIP -e $output_objdir/$realname.d/$shared_archive_member_spec.o~( func_echo_all "#! $soname($shared_archive_member_spec.o)"; if test shr_64 = "$shared_archive_member_spec"; then func_echo_all "# 64"; else func_echo_all "# 32"; fi; cat $export_symbols ) > $output_objdir/$realname.d/$shared_archive_member_spec.imp~$AR $AR_FLAGS $output_objdir/$soname $output_objdir/$realname.d/$shared_archive_member_spec.o $output_objdir/$realname.d/$shared_archive_member_spec.imp'
+ else
+ # used by -dlpreopen to get the symbols
+ _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$MV $output_objdir/$realname.d/$soname $output_objdir'
+ fi
+ _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$RM -r $output_objdir/$realname.d'
+ fi
+ fi
+ ;;
+
+ amigaos*)
+ case $host_cpu in
+ powerpc)
+ # see comment about AmigaOS4 .so support
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)=''
+ ;;
+ m68k)
+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ ;;
+ esac
+ ;;
+
+ bsdi[[45]]*)
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic
+ ;;
+
+ cygwin* | mingw* | pw32* | cegcc*)
+ # When not using gcc, we currently assume that we are using
+ # Microsoft Visual C++.
+ # hardcode_libdir_flag_spec is actually meaningless, as there is
+ # no search path for DLLs.
+ case $cc_basename in
+ cl*)
+ # Native MSVC
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ _LT_TAGVAR(always_export_symbols, $1)=yes
+ _LT_TAGVAR(file_list_spec, $1)='@'
+ # Tell ltmain to make .lib files, not .a files.
+ libext=lib
+ # Tell ltmain to make .dll files, not .so files.
+ shrext_cmds=.dll
+ # FIXME: Setting linknames here is a bad hack.
+ _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~linknames='
+ _LT_TAGVAR(archive_expsym_cmds, $1)='if _LT_DLL_DEF_P([$export_symbols]); then
+ cp "$export_symbols" "$output_objdir/$soname.def";
+ echo "$tool_output_objdir$soname.def" > "$output_objdir/$soname.exp";
+ else
+ $SED -e '\''s/^/-link -EXPORT:/'\'' < $export_symbols > $output_objdir/$soname.exp;
+ fi~
+ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
+ linknames='
+ # The linker will not automatically build a static lib if we build a DLL.
+ # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+ _LT_TAGVAR(exclude_expsyms, $1)='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*'
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1,DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols'
+ # Don't use ranlib
+ _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib'
+ _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~
+ lt_tool_outputfile="@TOOL_OUTPUT@"~
+ case $lt_outputfile in
+ *.exe|*.EXE) ;;
+ *)
+ lt_outputfile=$lt_outputfile.exe
+ lt_tool_outputfile=$lt_tool_outputfile.exe
+ ;;
+ esac~
+ if test : != "$MANIFEST_TOOL" && test -f "$lt_outputfile.manifest"; then
+ $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
+ $RM "$lt_outputfile.manifest";
+ fi'
+ ;;
+ *)
+ # Assume MSVC wrapper
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ # Tell ltmain to make .lib files, not .a files.
+ libext=lib
+ # Tell ltmain to make .dll files, not .so files.
+ shrext_cmds=.dll
+ # FIXME: Setting linknames here is a bad hack.
+ _LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
+ # The linker will automatically build a .lib file if we build a DLL.
+ _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
+ # FIXME: Should let the user specify the lib program.
+ _LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs'
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+ ;;
+ esac
+ ;;
+
+ darwin* | rhapsody*)
+ _LT_DARWIN_LINKER_FEATURES($1)
+ ;;
+
+ dgux*)
+ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+
+ # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
+ # support. Future versions do this automatically, but an explicit c++rt0.o
+ # does not break anything, and helps significantly (at the cost of a little
+ # extra space).
+ freebsd2.2*)
+ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+
+ # Unfortunately, older versions of FreeBSD 2 do not have this feature.
+ freebsd2.*)
+ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+
+ # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
+ freebsd* | dragonfly*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+
+ hpux9*)
+ if test yes = "$GCC"; then
+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared $pic_flag $wl+b $wl$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib'
+ else
+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib'
+ fi
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+
+ # hardcode_minus_L: Not really in the search PATH,
+ # but as the default location of the library.
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
+ ;;
+
+ hpux10*)
+ if test yes,no = "$GCC,$with_gnu_ld"; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ else
+ _LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+ fi
+ if test no = "$with_gnu_ld"; then
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
+ # hardcode_minus_L: Not really in the search PATH,
+ # but as the default location of the library.
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ fi
+ ;;
+
+ hpux11*)
+ if test yes,no = "$GCC,$with_gnu_ld"; then
+ case $host_cpu in
+ hppa*64*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ ia64*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ *)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ esac
+ else
+ case $host_cpu in
+ hppa*64*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ ia64*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ *)
+ m4_if($1, [], [
+ # Older versions of the 11.00 compiler do not understand -b yet
+ # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does)
+ _LT_LINKER_OPTION([if $CC understands -b],
+ _LT_TAGVAR(lt_cv_prog_compiler__b, $1), [-b],
+ [_LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'],
+ [_LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'])],
+ [_LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'])
+ ;;
+ esac
+ fi
+ if test no = "$with_gnu_ld"; then
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+ case $host_cpu in
+ hppa*64*|ia64*)
+ _LT_TAGVAR(hardcode_direct, $1)=no
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+ *)
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
+
+ # hardcode_minus_L: Not really in the search PATH,
+ # but as the default location of the library.
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ ;;
+ esac
+ fi
+ ;;
+
+ irix5* | irix6* | nonstopux*)
+ if test yes = "$GCC"; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
+ # Try to use the -exported_symbol ld option, if it does not
+ # work, assume that -exports_file does not work either and
+ # implicitly export all symbols.
+ # This should be the same for all languages, so no per-tag cache variable.
+ AC_CACHE_CHECK([whether the $host_os linker accepts -exported_symbol],
+ [lt_cv_irix_exported_symbol],
+ [save_LDFLAGS=$LDFLAGS
+ LDFLAGS="$LDFLAGS -shared $wl-exported_symbol ${wl}foo $wl-update_registry $wl/dev/null"
+ AC_LINK_IFELSE(
+ [AC_LANG_SOURCE(
+ [AC_LANG_CASE([C], [[int foo (void) { return 0; }]],
+ [C++], [[int foo (void) { return 0; }]],
+ [Fortran 77], [[
+ subroutine foo
+ end]],
+ [Fortran], [[
+ subroutine foo
+ end]])])],
+ [lt_cv_irix_exported_symbol=yes],
+ [lt_cv_irix_exported_symbol=no])
+ LDFLAGS=$save_LDFLAGS])
+ if test yes = "$lt_cv_irix_exported_symbol"; then
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations $wl-exports_file $wl$export_symbols -o $lib'
+ fi
+ else
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -exports_file $export_symbols -o $lib'
+ fi
+ _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+ _LT_TAGVAR(inherit_rpath, $1)=yes
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ ;;
+
+ linux*)
+ case $cc_basename in
+ tcc*)
+ # Fabrice Bellard et al's Tiny C Compiler
+ _LT_TAGVAR(ld_shlibs, $1)=yes
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ esac
+ ;;
+
+ netbsd*)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
+ else
+ _LT_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF
+ fi
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+
+ newsos6)
+ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+
+ *nto* | *qnx*)
+ ;;
+
+ openbsd* | bitrig*)
+ if test -f /usr/libexec/ld.so; then
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags $wl-retain-symbols-file,$export_symbols'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
+ else
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
+ fi
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+
+ os2*)
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ shrext_cmds=.dll
+ _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+ $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+ $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+ $ECHO EXPORTS >> $output_objdir/$libname.def~
+ emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~
+ $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+ emximp -o $lib $output_objdir/$libname.def'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+ $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+ $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+ $ECHO EXPORTS >> $output_objdir/$libname.def~
+ prefix_cmds="$SED"~
+ if test EXPORTS = "`$SED 1q $export_symbols`"; then
+ prefix_cmds="$prefix_cmds -e 1d";
+ fi~
+ prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~
+ cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~
+ $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+ emximp -o $lib $output_objdir/$libname.def'
+ _LT_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def'
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+ ;;
+
+ osf3*)
+ if test yes = "$GCC"; then
+ _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-expect_unresolved $wl\*'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
+ else
+ _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
+ fi
+ _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+ ;;
+
+ osf4* | osf5*) # as osf3* with the addition of -msym flag
+ if test yes = "$GCC"; then
+ _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-expect_unresolved $wl\*'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $pic_flag $libobjs $deplibs $compiler_flags $wl-msym $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
+ else
+ _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
+ $CC -shared$allow_undefined_flag $wl-input $wl$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib~$RM $lib.exp'
+
+ # Both c and cxx compiler support -rpath directly
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+ fi
+ _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+ ;;
+
+ solaris*)
+ _LT_TAGVAR(no_undefined_flag, $1)=' -z defs'
+ if test yes = "$GCC"; then
+ wlarc='$wl'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $wl-z ${wl}text $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $CC -shared $pic_flag $wl-z ${wl}text $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+ else
+ case `$CC -V 2>&1` in
+ *"Compilers 5.0"*)
+ wlarc=''
+ _LT_TAGVAR(archive_cmds, $1)='$LD -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $LD -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
+ ;;
+ *)
+ wlarc='$wl'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $CC -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+ ;;
+ esac
+ fi
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ case $host_os in
+ solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
+ *)
+ # The compiler driver will combine and reorder linker options,
+ # but understands '-z linker_flag'. GCC discards it without '$wl',
+ # but is careful enough not to reorder.
+ # Supported since Solaris 2.6 (maybe 2.5.1?)
+ if test yes = "$GCC"; then
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl-z ${wl}allextract$convenience $wl-z ${wl}defaultextract'
+ else
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
+ fi
+ ;;
+ esac
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ ;;
+
+ sunos4*)
+ if test sequent = "$host_vendor"; then
+ # Use $CC to link under sequent, because it throws in some extra .o
+ # files that make .init and .fini sections work.
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h $soname -o $lib $libobjs $deplibs $compiler_flags'
+ else
+ _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
+ fi
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+
+ sysv4)
+ case $host_vendor in
+ sni)
+ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(hardcode_direct, $1)=yes # is this really true???
+ ;;
+ siemens)
+ ## LD is ld it makes a PLAMLIB
+ ## CC just makes a GrossModule.
+ _LT_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs'
+ _LT_TAGVAR(hardcode_direct, $1)=no
+ ;;
+ motorola)
+ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie
+ ;;
+ esac
+ runpath_var='LD_RUN_PATH'
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+
+ sysv4.3*)
+ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport'
+ ;;
+
+ sysv4*MP*)
+ if test -d /usr/nec; then
+ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ runpath_var=LD_RUN_PATH
+ hardcode_runpath_var=yes
+ _LT_TAGVAR(ld_shlibs, $1)=yes
+ fi
+ ;;
+
+ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
+ _LT_TAGVAR(no_undefined_flag, $1)='$wl-z,text'
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ runpath_var='LD_RUN_PATH'
+
+ if test yes = "$GCC"; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ else
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ fi
+ ;;
+
+ sysv5* | sco3.2v5* | sco5v6*)
+ # Note: We CANNOT use -z defs as we might desire, because we do not
+ # link with -lc, and that would cause any symbols used from libc to
+ # always be unresolved, which means just about no library would
+ # ever link correctly. If we're not using GNU ld we use -z text
+ # though, which does catch some bad symbols but isn't as heavy-handed
+ # as -z defs.
+ _LT_TAGVAR(no_undefined_flag, $1)='$wl-z,text'
+ _LT_TAGVAR(allow_undefined_flag, $1)='$wl-z,nodefs'
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R,$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-Bexport'
+ runpath_var='LD_RUN_PATH'
+
+ if test yes = "$GCC"; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ else
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ fi
+ ;;
+
+ uts4*)
+ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+
+ *)
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ esac
+
+ if test sni = "$host_vendor"; then
+ case $host in
+ sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-Blargedynsym'
+ ;;
+ esac
+ fi
+ fi
+])
+AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)])
+test no = "$_LT_TAGVAR(ld_shlibs, $1)" && can_build_shared=no
+
+_LT_TAGVAR(with_gnu_ld, $1)=$with_gnu_ld
+
+_LT_DECL([], [libext], [0], [Old archive suffix (normally "a")])dnl
+_LT_DECL([], [shrext_cmds], [1], [Shared library suffix (normally ".so")])dnl
+_LT_DECL([], [extract_expsyms_cmds], [2],
+ [The commands to extract the exported symbol list from a shared archive])
+
+#
+# Do we need to explicitly link libc?
+#
+case "x$_LT_TAGVAR(archive_cmds_need_lc, $1)" in
+x|xyes)
+ # Assume -lc should be added
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
+
+ if test yes,yes = "$GCC,$enable_shared"; then
+ case $_LT_TAGVAR(archive_cmds, $1) in
+ *'~'*)
+ # FIXME: we may have to deal with multi-command sequences.
+ ;;
+ '$CC '*)
+ # Test whether the compiler implicitly links with -lc since on some
+ # systems, -lgcc has to come before -lc. If gcc already passes -lc
+ # to ld, don't add -lc before -lgcc.
+ AC_CACHE_CHECK([whether -lc should be explicitly linked in],
+ [lt_cv_]_LT_TAGVAR(archive_cmds_need_lc, $1),
+ [$RM conftest*
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+ if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
+ soname=conftest
+ lib=conftest
+ libobjs=conftest.$ac_objext
+ deplibs=
+ wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1)
+ pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1)
+ compiler_flags=-v
+ linker_flags=-v
+ verstring=
+ output_objdir=.
+ libname=conftest
+ lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1)
+ _LT_TAGVAR(allow_undefined_flag, $1)=
+ if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1)
+ then
+ lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+ else
+ lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=yes
+ fi
+ _LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag
+ else
+ cat conftest.err 1>&5
+ fi
+ $RM conftest*
+ ])
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=$lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)
+ ;;
+ esac
+ fi
+ ;;
+esac
+
+_LT_TAGDECL([build_libtool_need_lc], [archive_cmds_need_lc], [0],
+ [Whether or not to add -lc for building shared libraries])
+_LT_TAGDECL([allow_libtool_libs_with_static_runtimes],
+ [enable_shared_with_static_runtimes], [0],
+ [Whether or not to disallow shared libs when runtime libs are static])
+_LT_TAGDECL([], [export_dynamic_flag_spec], [1],
+ [Compiler flag to allow reflexive dlopens])
+_LT_TAGDECL([], [whole_archive_flag_spec], [1],
+ [Compiler flag to generate shared objects directly from archives])
+_LT_TAGDECL([], [compiler_needs_object], [1],
+ [Whether the compiler copes with passing no objects directly])
+_LT_TAGDECL([], [old_archive_from_new_cmds], [2],
+ [Create an old-style archive from a shared archive])
+_LT_TAGDECL([], [old_archive_from_expsyms_cmds], [2],
+ [Create a temporary old-style archive to link instead of a shared archive])
+_LT_TAGDECL([], [archive_cmds], [2], [Commands used to build a shared archive])
+_LT_TAGDECL([], [archive_expsym_cmds], [2])
+_LT_TAGDECL([], [module_cmds], [2],
+ [Commands used to build a loadable module if different from building
+ a shared archive.])
+_LT_TAGDECL([], [module_expsym_cmds], [2])
+_LT_TAGDECL([], [with_gnu_ld], [1],
+ [Whether we are building with GNU ld or not])
+_LT_TAGDECL([], [allow_undefined_flag], [1],
+ [Flag that allows shared libraries with undefined symbols to be built])
+_LT_TAGDECL([], [no_undefined_flag], [1],
+ [Flag that enforces no undefined symbols])
+_LT_TAGDECL([], [hardcode_libdir_flag_spec], [1],
+ [Flag to hardcode $libdir into a binary during linking.
+ This must work even if $libdir does not exist])
+_LT_TAGDECL([], [hardcode_libdir_separator], [1],
+ [Whether we need a single "-rpath" flag with a separated argument])
+_LT_TAGDECL([], [hardcode_direct], [0],
+ [Set to "yes" if using DIR/libNAME$shared_ext during linking hardcodes
+ DIR into the resulting binary])
+_LT_TAGDECL([], [hardcode_direct_absolute], [0],
+ [Set to "yes" if using DIR/libNAME$shared_ext during linking hardcodes
+ DIR into the resulting binary and the resulting library dependency is
+ "absolute", i.e impossible to change by setting $shlibpath_var if the
+ library is relocated])
+_LT_TAGDECL([], [hardcode_minus_L], [0],
+ [Set to "yes" if using the -LDIR flag during linking hardcodes DIR
+ into the resulting binary])
+_LT_TAGDECL([], [hardcode_shlibpath_var], [0],
+ [Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
+ into the resulting binary])
+_LT_TAGDECL([], [hardcode_automatic], [0],
+ [Set to "yes" if building a shared library automatically hardcodes DIR
+ into the library and all subsequent libraries and executables linked
+ against it])
+_LT_TAGDECL([], [inherit_rpath], [0],
+ [Set to yes if linker adds runtime paths of dependent libraries
+ to runtime path list])
+_LT_TAGDECL([], [link_all_deplibs], [0],
+ [Whether libtool must link a program against all its dependency libraries])
+_LT_TAGDECL([], [always_export_symbols], [0],
+ [Set to "yes" if exported symbols are required])
+_LT_TAGDECL([], [export_symbols_cmds], [2],
+ [The commands to list exported symbols])
+_LT_TAGDECL([], [exclude_expsyms], [1],
+ [Symbols that should not be listed in the preloaded symbols])
+_LT_TAGDECL([], [include_expsyms], [1],
+ [Symbols that must always be exported])
+_LT_TAGDECL([], [prelink_cmds], [2],
+ [Commands necessary for linking programs (against libraries) with templates])
+_LT_TAGDECL([], [postlink_cmds], [2],
+ [Commands necessary for finishing linking programs])
+_LT_TAGDECL([], [file_list_spec], [1],
+ [Specify filename containing input files])
+dnl FIXME: Not yet implemented
+dnl _LT_TAGDECL([], [thread_safe_flag_spec], [1],
+dnl [Compiler flag to generate thread safe objects])
+])# _LT_LINKER_SHLIBS
+
+
+# _LT_LANG_C_CONFIG([TAG])
+# ------------------------
+# Ensure that the configuration variables for a C compiler are suitably
+# defined. These variables are subsequently used by _LT_CONFIG to write
+# the compiler configuration to 'libtool'.
+m4_defun([_LT_LANG_C_CONFIG],
+[m4_require([_LT_DECL_EGREP])dnl
+lt_save_CC=$CC
+AC_LANG_PUSH(C)
+
+# Source file extension for C test sources.
+ac_ext=c
+
+# Object file extension for compiled C test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="int some_variable = 0;"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='int main(){return(0);}'
+
+_LT_TAG_COMPILER
+# Save the default compiler, since it gets overwritten when the other
+# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP.
+compiler_DEFAULT=$CC
+
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+
+if test -n "$compiler"; then
+ _LT_COMPILER_NO_RTTI($1)
+ _LT_COMPILER_PIC($1)
+ _LT_COMPILER_C_O($1)
+ _LT_COMPILER_FILE_LOCKS($1)
+ _LT_LINKER_SHLIBS($1)
+ _LT_SYS_DYNAMIC_LINKER($1)
+ _LT_LINKER_HARDCODE_LIBPATH($1)
+ LT_SYS_DLOPEN_SELF
+ _LT_CMD_STRIPLIB
+
+ # Report what library types will actually be built
+ AC_MSG_CHECKING([if libtool supports shared libraries])
+ AC_MSG_RESULT([$can_build_shared])
+
+ AC_MSG_CHECKING([whether to build shared libraries])
+ test no = "$can_build_shared" && enable_shared=no
+
+ # On AIX, shared libraries and static libraries use the same namespace, and
+ # are all built from PIC.
+ case $host_os in
+ aix3*)
+ test yes = "$enable_shared" && enable_static=no
+ if test -n "$RANLIB"; then
+ archive_cmds="$archive_cmds~\$RANLIB \$lib"
+ postinstall_cmds='$RANLIB $lib'
+ fi
+ ;;
+
+ aix[[4-9]]*)
+ if test ia64 != "$host_cpu"; then
+ case $enable_shared,$with_aix_soname,$aix_use_runtimelinking in
+ yes,aix,yes) ;; # shared object as lib.so file only
+ yes,svr4,*) ;; # shared object as lib.so archive member only
+ yes,*) enable_static=no ;; # shared object in lib.a archive as well
+ esac
+ fi
+ ;;
+ esac
+ AC_MSG_RESULT([$enable_shared])
+
+ AC_MSG_CHECKING([whether to build static libraries])
+ # Make sure either enable_shared or enable_static is yes.
+ test yes = "$enable_shared" || enable_static=yes
+ AC_MSG_RESULT([$enable_static])
+
+ _LT_CONFIG($1)
+fi
+AC_LANG_POP
+CC=$lt_save_CC
+])# _LT_LANG_C_CONFIG
+
+
+# _LT_LANG_CXX_CONFIG([TAG])
+# --------------------------
+# Ensure that the configuration variables for a C++ compiler are suitably
+# defined. These variables are subsequently used by _LT_CONFIG to write
+# the compiler configuration to 'libtool'.
+m4_defun([_LT_LANG_CXX_CONFIG],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_EGREP])dnl
+m4_require([_LT_PATH_MANIFEST_TOOL])dnl
+if test -n "$CXX" && ( test no != "$CXX" &&
+ ( (test g++ = "$CXX" && `g++ -v >/dev/null 2>&1` ) ||
+ (test g++ != "$CXX"))); then
+ AC_PROG_CXXCPP
+else
+ _lt_caught_CXX_error=yes
+fi
+
+AC_LANG_PUSH(C++)
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+_LT_TAGVAR(allow_undefined_flag, $1)=
+_LT_TAGVAR(always_export_symbols, $1)=no
+_LT_TAGVAR(archive_expsym_cmds, $1)=
+_LT_TAGVAR(compiler_needs_object, $1)=no
+_LT_TAGVAR(export_dynamic_flag_spec, $1)=
+_LT_TAGVAR(hardcode_direct, $1)=no
+_LT_TAGVAR(hardcode_direct_absolute, $1)=no
+_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+_LT_TAGVAR(hardcode_libdir_separator, $1)=
+_LT_TAGVAR(hardcode_minus_L, $1)=no
+_LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+_LT_TAGVAR(hardcode_automatic, $1)=no
+_LT_TAGVAR(inherit_rpath, $1)=no
+_LT_TAGVAR(module_cmds, $1)=
+_LT_TAGVAR(module_expsym_cmds, $1)=
+_LT_TAGVAR(link_all_deplibs, $1)=unknown
+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(reload_flag, $1)=$reload_flag
+_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
+_LT_TAGVAR(no_undefined_flag, $1)=
+_LT_TAGVAR(whole_archive_flag_spec, $1)=
+_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+
+# Source file extension for C++ test sources.
+ac_ext=cpp
+
+# Object file extension for compiled C++ test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# No sense in running all these tests if we already determined that
+# the CXX compiler isn't working. Some variables (like enable_shared)
+# are currently assumed to apply to all compilers on this platform,
+# and will be corrupted by setting them based on a non-working compiler.
+if test yes != "$_lt_caught_CXX_error"; then
+ # Code to be used in simple compile tests
+ lt_simple_compile_test_code="int some_variable = 0;"
+
+ # Code to be used in simple link tests
+ lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }'
+
+ # ltmain only uses $CC for tagged configurations so make sure $CC is set.
+ _LT_TAG_COMPILER
+
+ # save warnings/boilerplate of simple test code
+ _LT_COMPILER_BOILERPLATE
+ _LT_LINKER_BOILERPLATE
+
+ # Allow CC to be a program name with arguments.
+ lt_save_CC=$CC
+ lt_save_CFLAGS=$CFLAGS
+ lt_save_LD=$LD
+ lt_save_GCC=$GCC
+ GCC=$GXX
+ lt_save_with_gnu_ld=$with_gnu_ld
+ lt_save_path_LD=$lt_cv_path_LD
+ if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
+ lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
+ else
+ $as_unset lt_cv_prog_gnu_ld
+ fi
+ if test -n "${lt_cv_path_LDCXX+set}"; then
+ lt_cv_path_LD=$lt_cv_path_LDCXX
+ else
+ $as_unset lt_cv_path_LD
+ fi
+ test -z "${LDCXX+set}" || LD=$LDCXX
+ CC=${CXX-"c++"}
+ CFLAGS=$CXXFLAGS
+ compiler=$CC
+ _LT_TAGVAR(compiler, $1)=$CC
+ _LT_CC_BASENAME([$compiler])
+
+ if test -n "$compiler"; then
+ # We don't want -fno-exception when compiling C++ code, so set the
+ # no_builtin_flag separately
+ if test yes = "$GXX"; then
+ _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
+ else
+ _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
+ fi
+
+ if test yes = "$GXX"; then
+ # Set up default GNU C++ configuration
+
+ LT_PATH_LD
+
+ # Check if GNU C++ uses GNU ld as the underlying linker, since the
+ # archiving commands below assume that GNU ld is being used.
+ if test yes = "$with_gnu_ld"; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
+
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic'
+
+ # If archive_cmds runs LD, not CC, wlarc should be empty
+ # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
+ # investigate it a little bit more. (MM)
+ wlarc='$wl'
+
+ # ancient GNU ld didn't support --whole-archive et. al.
+ if eval "`$CC -print-prog-name=ld` --help 2>&1" |
+ $GREP 'no-whole-archive' > /dev/null; then
+ _LT_TAGVAR(whole_archive_flag_spec, $1)=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive'
+ else
+ _LT_TAGVAR(whole_archive_flag_spec, $1)=
+ fi
+ else
+ with_gnu_ld=no
+ wlarc=
+
+ # A generic and very simple default shared library creation
+ # command for GNU C++ for the case where it uses the native
+ # linker, instead of GNU ld. If possible, this setting should
+ # overridden to take advantage of the native linker features on
+ # the platform it is being used on.
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+ fi
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+
+ else
+ GXX=no
+ with_gnu_ld=no
+ wlarc=
+ fi
+
+ # PORTME: fill in a description of your system's C++ link characteristics
+ AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
+ _LT_TAGVAR(ld_shlibs, $1)=yes
+ case $host_os in
+ aix3*)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ aix[[4-9]]*)
+ if test ia64 = "$host_cpu"; then
+ # On IA64, the linker does run time linking by default, so we don't
+ # have to do anything special.
+ aix_use_runtimelinking=no
+ exp_sym_flag='-Bexport'
+ no_entry_flag=
+ else
+ aix_use_runtimelinking=no
+
+ # Test if we are trying to use run time linking or normal
+ # AIX style linking. If -brtl is somewhere in LDFLAGS, we
+ # have runtime linking enabled, and use it for executables.
+ # For shared libraries, we enable/disable runtime linking
+ # depending on the kind of the shared library created -
+ # when "with_aix_soname,aix_use_runtimelinking" is:
+ # "aix,no" lib.a(lib.so.V) shared, rtl:no, for executables
+ # "aix,yes" lib.so shared, rtl:yes, for executables
+ # lib.a static archive
+ # "both,no" lib.so.V(shr.o) shared, rtl:yes
+ # lib.a(lib.so.V) shared, rtl:no, for executables
+ # "both,yes" lib.so.V(shr.o) shared, rtl:yes, for executables
+ # lib.a(lib.so.V) shared, rtl:no
+ # "svr4,*" lib.so.V(shr.o) shared, rtl:yes, for executables
+ # lib.a static archive
+ case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
+ for ld_flag in $LDFLAGS; do
+ case $ld_flag in
+ *-brtl*)
+ aix_use_runtimelinking=yes
+ break
+ ;;
+ esac
+ done
+ if test svr4,no = "$with_aix_soname,$aix_use_runtimelinking"; then
+ # With aix-soname=svr4, we create the lib.so.V shared archives only,
+ # so we don't have lib.a shared libs to link our executables.
+ # We have to force runtime linking in this case.
+ aix_use_runtimelinking=yes
+ LDFLAGS="$LDFLAGS -Wl,-brtl"
+ fi
+ ;;
+ esac
+
+ exp_sym_flag='-bexport'
+ no_entry_flag='-bnoentry'
+ fi
+
+ # When large executables or shared objects are built, AIX ld can
+ # have problems creating the table of contents. If linking a library
+ # or program results in "error TOC overflow" add -mminimal-toc to
+ # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
+ # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+ _LT_TAGVAR(archive_cmds, $1)=''
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ _LT_TAGVAR(file_list_spec, $1)='$wl-f,'
+ case $with_aix_soname,$aix_use_runtimelinking in
+ aix,*) ;; # no import file
+ svr4,* | *,yes) # use import file
+ # The Import File defines what to hardcode.
+ _LT_TAGVAR(hardcode_direct, $1)=no
+ _LT_TAGVAR(hardcode_direct_absolute, $1)=no
+ ;;
+ esac
+
+ if test yes = "$GXX"; then
+ case $host_os in aix4.[[012]]|aix4.[[012]].*)
+ # We only want to do this on AIX 4.2 and lower, the check
+ # below for broken collect2 doesn't work under 4.3+
+ collect2name=`$CC -print-prog-name=collect2`
+ if test -f "$collect2name" &&
+ strings "$collect2name" | $GREP resolve_lib_name >/dev/null
+ then
+ # We have reworked collect2
+ :
+ else
+ # We have old collect2
+ _LT_TAGVAR(hardcode_direct, $1)=unsupported
+ # It fails to find uninstalled libraries when the uninstalled
+ # path is not listed in the libpath. Setting hardcode_minus_L
+ # to unsupported forces relinking
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=
+ fi
+ esac
+ shared_flag='-shared'
+ if test yes = "$aix_use_runtimelinking"; then
+ shared_flag=$shared_flag' $wl-G'
+ fi
+ # Need to ensure runtime linking is disabled for the traditional
+ # shared library, or the linker may eventually find shared libraries
+ # /with/ Import File - we do not want to mix them.
+ shared_flag_aix='-shared'
+ shared_flag_svr4='-shared $wl-G'
+ else
+ # not using gcc
+ if test ia64 = "$host_cpu"; then
+ # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+ # chokes on -Wl,-G. The following line is correct:
+ shared_flag='-G'
+ else
+ if test yes = "$aix_use_runtimelinking"; then
+ shared_flag='$wl-G'
+ else
+ shared_flag='$wl-bM:SRE'
+ fi
+ shared_flag_aix='$wl-bM:SRE'
+ shared_flag_svr4='$wl-G'
+ fi
+ fi
+
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-bexpall'
+ # It seems that -bexpall does not export symbols beginning with
+ # underscore (_), so it is better to generate a list of symbols to
+ # export.
+ _LT_TAGVAR(always_export_symbols, $1)=yes
+ if test aix,yes = "$with_aix_soname,$aix_use_runtimelinking"; then
+ # Warning - without using the other runtime loading flags (-brtl),
+ # -berok will link without error, but may produce a broken library.
+ # The "-G" linker flag allows undefined symbols.
+ _LT_TAGVAR(no_undefined_flag, $1)='-bernotok'
+ # Determine the default libpath from the value encoded in an empty
+ # executable.
+ _LT_SYS_MODULE_PATH_AIX([$1])
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-blibpath:$libdir:'"$aix_libpath"
+
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs $wl'$no_entry_flag' $compiler_flags `if test -n "$allow_undefined_flag"; then func_echo_all "$wl$allow_undefined_flag"; else :; fi` $wl'$exp_sym_flag:\$export_symbols' '$shared_flag
+ else
+ if test ia64 = "$host_cpu"; then
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R $libdir:/usr/lib:/lib'
+ _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
+ _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\$wl$no_entry_flag"' $compiler_flags $wl$allow_undefined_flag '"\$wl$exp_sym_flag:\$export_symbols"
+ else
+ # Determine the default libpath from the value encoded in an
+ # empty executable.
+ _LT_SYS_MODULE_PATH_AIX([$1])
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-blibpath:$libdir:'"$aix_libpath"
+ # Warning - without using the other run time loading flags,
+ # -berok will link without error, but may produce a broken library.
+ _LT_TAGVAR(no_undefined_flag, $1)=' $wl-bernotok'
+ _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-berok'
+ if test yes = "$with_gnu_ld"; then
+ # We only use this code for GNU lds that support --whole-archive.
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive$convenience $wl--no-whole-archive'
+ else
+ # Exported symbols can be pulled into shared objects from archives
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
+ fi
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$RM -r $output_objdir/$realname.d~$MKDIR $output_objdir/$realname.d'
+ # -brtl affects multiple linker settings, -berok does not and is overridden later
+ compiler_flags_filtered='`func_echo_all "$compiler_flags " | $SED -e "s%-brtl\\([[, ]]\\)%-berok\\1%g"`'
+ if test svr4 != "$with_aix_soname"; then
+ # This is similar to how AIX traditionally builds its shared
+ # libraries. Need -bnortl late, we may have -brtl in LDFLAGS.
+ _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$CC '$shared_flag_aix' -o $output_objdir/$realname.d/$soname $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$realname.d/$soname'
+ fi
+ if test aix != "$with_aix_soname"; then
+ _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$CC '$shared_flag_svr4' -o $output_objdir/$realname.d/$shared_archive_member_spec.o $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$STRIP -e $output_objdir/$realname.d/$shared_archive_member_spec.o~( func_echo_all "#! $soname($shared_archive_member_spec.o)"; if test shr_64 = "$shared_archive_member_spec"; then func_echo_all "# 64"; else func_echo_all "# 32"; fi; cat $export_symbols ) > $output_objdir/$realname.d/$shared_archive_member_spec.imp~$AR $AR_FLAGS $output_objdir/$soname $output_objdir/$realname.d/$shared_archive_member_spec.o $output_objdir/$realname.d/$shared_archive_member_spec.imp'
+ else
+ # used by -dlpreopen to get the symbols
+ _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$MV $output_objdir/$realname.d/$soname $output_objdir'
+ fi
+ _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$RM -r $output_objdir/$realname.d'
+ fi
+ fi
+ ;;
+
+ beos*)
+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+ # support --undefined. This deserves some investigation. FIXME
+ _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+
+ chorus*)
+ case $cc_basename in
+ *)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ esac
+ ;;
+
+ cygwin* | mingw* | pw32* | cegcc*)
+ case $GXX,$cc_basename in
+ ,cl* | no,cl*)
+ # Native MSVC
+ # hardcode_libdir_flag_spec is actually meaningless, as there is
+ # no search path for DLLs.
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ _LT_TAGVAR(always_export_symbols, $1)=yes
+ _LT_TAGVAR(file_list_spec, $1)='@'
+ # Tell ltmain to make .lib files, not .a files.
+ libext=lib
+ # Tell ltmain to make .dll files, not .so files.
+ shrext_cmds=.dll
+ # FIXME: Setting linknames here is a bad hack.
+ _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~linknames='
+ _LT_TAGVAR(archive_expsym_cmds, $1)='if _LT_DLL_DEF_P([$export_symbols]); then
+ cp "$export_symbols" "$output_objdir/$soname.def";
+ echo "$tool_output_objdir$soname.def" > "$output_objdir/$soname.exp";
+ else
+ $SED -e '\''s/^/-link -EXPORT:/'\'' < $export_symbols > $output_objdir/$soname.exp;
+ fi~
+ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
+ linknames='
+ # The linker will not automatically build a static lib if we build a DLL.
+ # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+ # Don't use ranlib
+ _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib'
+ _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~
+ lt_tool_outputfile="@TOOL_OUTPUT@"~
+ case $lt_outputfile in
+ *.exe|*.EXE) ;;
+ *)
+ lt_outputfile=$lt_outputfile.exe
+ lt_tool_outputfile=$lt_tool_outputfile.exe
+ ;;
+ esac~
+ func_to_tool_file "$lt_outputfile"~
+ if test : != "$MANIFEST_TOOL" && test -f "$lt_outputfile.manifest"; then
+ $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
+ $RM "$lt_outputfile.manifest";
+ fi'
+ ;;
+ *)
+ # g++
+ # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
+ # as there is no search path for DLLs.
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-all-symbols'
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ _LT_TAGVAR(always_export_symbols, $1)=no
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+
+ if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ # If the export-symbols file already is a .def file, use it as
+ # is; otherwise, prepend EXPORTS...
+ _LT_TAGVAR(archive_expsym_cmds, $1)='if _LT_DLL_DEF_P([$export_symbols]); then
+ cp $export_symbols $output_objdir/$soname.def;
+ else
+ echo EXPORTS > $output_objdir/$soname.def;
+ cat $export_symbols >> $output_objdir/$soname.def;
+ fi~
+ $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+ esac
+ ;;
+ darwin* | rhapsody*)
+ _LT_DARWIN_LINKER_FEATURES($1)
+ ;;
+
+ os2*)
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ shrext_cmds=.dll
+ _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+ $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+ $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+ $ECHO EXPORTS >> $output_objdir/$libname.def~
+ emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~
+ $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+ emximp -o $lib $output_objdir/$libname.def'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+ $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+ $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+ $ECHO EXPORTS >> $output_objdir/$libname.def~
+ prefix_cmds="$SED"~
+ if test EXPORTS = "`$SED 1q $export_symbols`"; then
+ prefix_cmds="$prefix_cmds -e 1d";
+ fi~
+ prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~
+ cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~
+ $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+ emximp -o $lib $output_objdir/$libname.def'
+ _LT_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def'
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+ ;;
+
+ dgux*)
+ case $cc_basename in
+ ec++*)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ ghcx*)
+ # Green Hills C++ Compiler
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ *)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ esac
+ ;;
+
+ freebsd2.*)
+ # C++ shared libraries reported to be fairly broken before
+ # switch to ELF
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+
+ freebsd-elf*)
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+ ;;
+
+ freebsd* | dragonfly*)
+ # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
+ # conventions
+ _LT_TAGVAR(ld_shlibs, $1)=yes
+ ;;
+
+ haiku*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ ;;
+
+ hpux9*)
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
+ # but as the default
+ # location of the library.
+
+ case $cc_basename in
+ CC*)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ aCC*)
+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -b $wl+b $wl$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib'
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ #
+ # There doesn't appear to be a way to prevent this compiler from
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+ ;;
+ *)
+ if test yes = "$GXX"; then
+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag $wl+b $wl$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib'
+ else
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+ esac
+ ;;
+
+ hpux10*|hpux11*)
+ if test no = "$with_gnu_ld"; then
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+ case $host_cpu in
+ hppa*64*|ia64*)
+ ;;
+ *)
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
+ ;;
+ esac
+ fi
+ case $host_cpu in
+ hppa*64*|ia64*)
+ _LT_TAGVAR(hardcode_direct, $1)=no
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+ *)
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
+ # but as the default
+ # location of the library.
+ ;;
+ esac
+
+ case $cc_basename in
+ CC*)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ aCC*)
+ case $host_cpu in
+ hppa*64*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ ia64*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ *)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ esac
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ #
+ # There doesn't appear to be a way to prevent this compiler from
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+ ;;
+ *)
+ if test yes = "$GXX"; then
+ if test no = "$with_gnu_ld"; then
+ case $host_cpu in
+ hppa*64*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC $wl+h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ ia64*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag $wl+h $wl$soname $wl+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ *)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ esac
+ fi
+ else
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+ esac
+ ;;
+
+ interix[[3-9]]*)
+ _LT_TAGVAR(hardcode_direct, $1)=no
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
+ # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+ # Instead, shared libraries are loaded at an image base (0x10000000 by
+ # default) and relocated if they conflict, which is a slow very memory
+ # consuming and fragmenting process. To avoid this, we pick a random,
+ # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+ # time. Moving up from 0x10000000 also allows more sbrk(2) space.
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--retain-symbols-file,$output_objdir/$soname.expsym $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ ;;
+ irix5* | irix6*)
+ case $cc_basename in
+ CC*)
+ # SGI C++
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
+
+ # Archives containing C++ object files must be created using
+ # "CC -ar", where "CC" is the IRIX C++ compiler. This is
+ # necessary to make sure instantiated templates are included
+ # in the archive.
+ _LT_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs'
+ ;;
+ *)
+ if test yes = "$GXX"; then
+ if test no = "$with_gnu_ld"; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
+ else
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` -o $lib'
+ fi
+ fi
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ ;;
+ esac
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+ _LT_TAGVAR(inherit_rpath, $1)=yes
+ ;;
+
+ linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
+ case $cc_basename in
+ KCC*)
+ # Kuck and Associates, Inc. (KAI) C++ Compiler
+
+ # KCC will only create a shared library if the output file
+ # ends with ".so" (or ".sl" for HP-UX), so rename the library
+ # to its proper name (with version) after linking.
+ _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\$tempext\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\$tempext\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib $wl-retain-symbols-file,$export_symbols; mv \$templib $lib'
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ #
+ # There doesn't appear to be a way to prevent this compiler from
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+ output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic'
+
+ # Archives containing C++ object files must be created using
+ # "CC -Bstatic", where "CC" is the KAI C++ compiler.
+ _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
+ ;;
+ icpc* | ecpc* )
+ # Intel C++
+ with_gnu_ld=yes
+ # version 8.0 and above of icpc choke on multiply defined symbols
+ # if we add $predep_objects and $postdep_objects, however 7.1 and
+ # earlier do not add the objects themselves.
+ case `$CC -V 2>&1` in
+ *"Version 7."*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
+ ;;
+ *) # Version 8.0 or newer
+ tmp_idyn=
+ case $host_cpu in
+ ia64*) tmp_idyn=' -i_dynamic';;
+ esac
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
+ ;;
+ esac
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive$convenience $wl--no-whole-archive'
+ ;;
+ pgCC* | pgcpp*)
+ # Portland Group C++ compiler
+ case `$CC -V` in
+ *pgCC\ [[1-5]].* | *pgcpp\ [[1-5]].*)
+ _LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~
+ compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"'
+ _LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~
+ $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~
+ $RANLIB $oldlib'
+ _LT_TAGVAR(archive_cmds, $1)='tpldir=Template.dir~
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
+ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
+ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
+ ;;
+ *) # Version 6 and above use weak symbols
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
+ ;;
+ esac
+
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl--rpath $wl$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
+ ;;
+ cxx*)
+ # Compaq C++
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib $wl-retain-symbols-file $wl$export_symbols'
+
+ runpath_var=LD_RUN_PATH
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ #
+ # There doesn't appear to be a way to prevent this compiler from
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed'
+ ;;
+ xl* | mpixl* | bgxl*)
+ # IBM XL 8.0 on PPC, with GNU ld
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+ if test yes = "$supports_anon_versioning"; then
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+ echo "local: *; };" >> $output_objdir/$libname.ver~
+ $CC -qmkshrobj $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-version-script $wl$output_objdir/$libname.ver -o $lib'
+ fi
+ ;;
+ *)
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ C*)
+ # Sun C++ 5.9
+ _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G$allow_undefined_flag -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G$allow_undefined_flag -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-retain-symbols-file $wl$export_symbols'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
+ _LT_TAGVAR(compiler_needs_object, $1)=yes
+
+ # Not sure whether something based on
+ # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1
+ # would be better.
+ output_verbose_link_cmd='func_echo_all'
+
+ # Archives containing C++ object files must be created using
+ # "CC -xar", where "CC" is the Sun C++ compiler. This is
+ # necessary to make sure instantiated templates are included
+ # in the archive.
+ _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
+ ;;
+ esac
+ ;;
+ esac
+ ;;
+
+ lynxos*)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+
+ m88k*)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+
+ mvs*)
+ case $cc_basename in
+ cxx*)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ *)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ esac
+ ;;
+
+ netbsd*)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
+ wlarc=
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ fi
+ # Workaround some broken pre-1.5 toolchains
+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
+ ;;
+
+ *nto* | *qnx*)
+ _LT_TAGVAR(ld_shlibs, $1)=yes
+ ;;
+
+ openbsd* | bitrig*)
+ if test -f /usr/libexec/ld.so; then
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
+ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`"; then
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-retain-symbols-file,$export_symbols -o $lib'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive'
+ fi
+ output_verbose_link_cmd=func_echo_all
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+
+ osf3* | osf4* | osf5*)
+ case $cc_basename in
+ KCC*)
+ # Kuck and Associates, Inc. (KAI) C++ Compiler
+
+ # KCC will only create a shared library if the output file
+ # ends with ".so" (or ".sl" for HP-UX), so rename the library
+ # to its proper name (with version) after linking.
+ _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\$tempext\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+ # Archives containing C++ object files must be created using
+ # the KAI C++ compiler.
+ case $host in
+ osf3*) _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ;;
+ *) _LT_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' ;;
+ esac
+ ;;
+ RCC*)
+ # Rational C++ 2.4.1
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ cxx*)
+ case $host in
+ osf3*)
+ _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-expect_unresolved $wl\*'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $soname `test -n "$verstring" && func_echo_all "$wl-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
+ ;;
+ *)
+ _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
+ echo "-hidden">> $lib.exp~
+ $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname $wl-input $wl$lib.exp `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib~
+ $RM $lib.exp'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+ ;;
+ esac
+
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ #
+ # There doesn't appear to be a way to prevent this compiler from
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+ ;;
+ *)
+ if test yes,no = "$GXX,$with_gnu_ld"; then
+ _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-expect_unresolved $wl\*'
+ case $host in
+ osf3*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
+ ;;
+ *)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-msym $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
+ ;;
+ esac
+
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+
+ else
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+ esac
+ ;;
+
+ psos*)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+
+ sunos4*)
+ case $cc_basename in
+ CC*)
+ # Sun C++ 4.x
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ lcc*)
+ # Lucid
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ *)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ esac
+ ;;
+
+ solaris*)
+ case $cc_basename in
+ CC* | sunCC*)
+ # Sun C++ 4.2, 5.x and Centerline C++
+ _LT_TAGVAR(archive_cmds_need_lc,$1)=yes
+ _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G$allow_undefined_flag -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $CC -G$allow_undefined_flag $wl-M $wl$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ case $host_os in
+ solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
+ *)
+ # The compiler driver will combine and reorder linker options,
+ # but understands '-z linker_flag'.
+ # Supported since Solaris 2.6 (maybe 2.5.1?)
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
+ ;;
+ esac
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+
+ output_verbose_link_cmd='func_echo_all'
+
+ # Archives containing C++ object files must be created using
+ # "CC -xar", where "CC" is the Sun C++ compiler. This is
+ # necessary to make sure instantiated templates are included
+ # in the archive.
+ _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
+ ;;
+ gcx*)
+ # Green Hills C++ Compiler
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-h $wl$soname -o $lib'
+
+ # The C++ compiler must be used to create the archive.
+ _LT_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
+ ;;
+ *)
+ # GNU C++ compiler with Solaris linker
+ if test yes,no = "$GXX,$with_gnu_ld"; then
+ _LT_TAGVAR(no_undefined_flag, $1)=' $wl-z ${wl}defs'
+ if $CC --version | $GREP -v '^2\.7' > /dev/null; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-h $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $CC -shared $pic_flag -nostdlib $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+ else
+ # g++ 2.7 appears to require '-G' NOT '-shared' on this
+ # platform.
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-h $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $CC -G -nostdlib $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+ fi
+
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R $wl$libdir'
+ case $host_os in
+ solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
+ *)
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl-z ${wl}allextract$convenience $wl-z ${wl}defaultextract'
+ ;;
+ esac
+ fi
+ ;;
+ esac
+ ;;
+
+ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
+ _LT_TAGVAR(no_undefined_flag, $1)='$wl-z,text'
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ runpath_var='LD_RUN_PATH'
+
+ case $cc_basename in
+ CC*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ *)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ esac
+ ;;
+
+ sysv5* | sco3.2v5* | sco5v6*)
+ # Note: We CANNOT use -z defs as we might desire, because we do not
+ # link with -lc, and that would cause any symbols used from libc to
+ # always be unresolved, which means just about no library would
+ # ever link correctly. If we're not using GNU ld we use -z text
+ # though, which does catch some bad symbols but isn't as heavy-handed
+ # as -z defs.
+ _LT_TAGVAR(no_undefined_flag, $1)='$wl-z,text'
+ _LT_TAGVAR(allow_undefined_flag, $1)='$wl-z,nodefs'
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R,$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-Bexport'
+ runpath_var='LD_RUN_PATH'
+
+ case $cc_basename in
+ CC*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(old_archive_cmds, $1)='$CC -Tprelink_objects $oldobjs~
+ '"$_LT_TAGVAR(old_archive_cmds, $1)"
+ _LT_TAGVAR(reload_cmds, $1)='$CC -Tprelink_objects $reload_objs~
+ '"$_LT_TAGVAR(reload_cmds, $1)"
+ ;;
+ *)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ esac
+ ;;
+
+ tandem*)
+ case $cc_basename in
+ NCC*)
+ # NonStop-UX NCC 3.20
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ *)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ esac
+ ;;
+
+ vxworks*)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+
+ *)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ esac
+
+ AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)])
+ test no = "$_LT_TAGVAR(ld_shlibs, $1)" && can_build_shared=no
+
+ _LT_TAGVAR(GCC, $1)=$GXX
+ _LT_TAGVAR(LD, $1)=$LD
+
+ ## CAVEAT EMPTOR:
+ ## There is no encapsulation within the following macros, do not change
+ ## the running order or otherwise move them around unless you know exactly
+ ## what you are doing...
+ _LT_SYS_HIDDEN_LIBDEPS($1)
+ _LT_COMPILER_PIC($1)
+ _LT_COMPILER_C_O($1)
+ _LT_COMPILER_FILE_LOCKS($1)
+ _LT_LINKER_SHLIBS($1)
+ _LT_SYS_DYNAMIC_LINKER($1)
+ _LT_LINKER_HARDCODE_LIBPATH($1)
+
+ _LT_CONFIG($1)
+ fi # test -n "$compiler"
+
+ CC=$lt_save_CC
+ CFLAGS=$lt_save_CFLAGS
+ LDCXX=$LD
+ LD=$lt_save_LD
+ GCC=$lt_save_GCC
+ with_gnu_ld=$lt_save_with_gnu_ld
+ lt_cv_path_LDCXX=$lt_cv_path_LD
+ lt_cv_path_LD=$lt_save_path_LD
+ lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
+ lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
+fi # test yes != "$_lt_caught_CXX_error"
+
+AC_LANG_POP
+])# _LT_LANG_CXX_CONFIG
+
+
+# _LT_FUNC_STRIPNAME_CNF
+# ----------------------
+# func_stripname_cnf prefix suffix name
+# strip PREFIX and SUFFIX off of NAME.
+# PREFIX and SUFFIX must not contain globbing or regex special
+# characters, hashes, percent signs, but SUFFIX may contain a leading
+# dot (in which case that matches only a dot).
+#
+# This function is identical to the (non-XSI) version of func_stripname,
+# except this one can be used by m4 code that may be executed by configure,
+# rather than the libtool script.
+m4_defun([_LT_FUNC_STRIPNAME_CNF],[dnl
+AC_REQUIRE([_LT_DECL_SED])
+AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])
+func_stripname_cnf ()
+{
+ case @S|@2 in
+ .*) func_stripname_result=`$ECHO "@S|@3" | $SED "s%^@S|@1%%; s%\\\\@S|@2\$%%"`;;
+ *) func_stripname_result=`$ECHO "@S|@3" | $SED "s%^@S|@1%%; s%@S|@2\$%%"`;;
+ esac
+} # func_stripname_cnf
+])# _LT_FUNC_STRIPNAME_CNF
+
+
+# _LT_SYS_HIDDEN_LIBDEPS([TAGNAME])
+# ---------------------------------
+# Figure out "hidden" library dependencies from verbose
+# compiler output when linking a shared library.
+# Parse the compiler output and extract the necessary
+# objects, libraries and library flags.
+m4_defun([_LT_SYS_HIDDEN_LIBDEPS],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+AC_REQUIRE([_LT_FUNC_STRIPNAME_CNF])dnl
+# Dependencies to place before and after the object being linked:
+_LT_TAGVAR(predep_objects, $1)=
+_LT_TAGVAR(postdep_objects, $1)=
+_LT_TAGVAR(predeps, $1)=
+_LT_TAGVAR(postdeps, $1)=
+_LT_TAGVAR(compiler_lib_search_path, $1)=
+
+dnl we can't use the lt_simple_compile_test_code here,
+dnl because it contains code intended for an executable,
+dnl not a library. It's possible we should let each
+dnl tag define a new lt_????_link_test_code variable,
+dnl but it's only used here...
+m4_if([$1], [], [cat > conftest.$ac_ext <<_LT_EOF
+int a;
+void foo (void) { a = 0; }
+_LT_EOF
+], [$1], [CXX], [cat > conftest.$ac_ext <<_LT_EOF
+class Foo
+{
+public:
+ Foo (void) { a = 0; }
+private:
+ int a;
+};
+_LT_EOF
+], [$1], [F77], [cat > conftest.$ac_ext <<_LT_EOF
+ subroutine foo
+ implicit none
+ integer*4 a
+ a=0
+ return
+ end
+_LT_EOF
+], [$1], [FC], [cat > conftest.$ac_ext <<_LT_EOF
+ subroutine foo
+ implicit none
+ integer a
+ a=0
+ return
+ end
+_LT_EOF
+], [$1], [GCJ], [cat > conftest.$ac_ext <<_LT_EOF
+public class foo {
+ private int a;
+ public void bar (void) {
+ a = 0;
+ }
+};
+_LT_EOF
+], [$1], [GO], [cat > conftest.$ac_ext <<_LT_EOF
+package foo
+func foo() {
+}
+_LT_EOF
+])
+
+_lt_libdeps_save_CFLAGS=$CFLAGS
+case "$CC $CFLAGS " in #(
+*\ -flto*\ *) CFLAGS="$CFLAGS -fno-lto" ;;
+*\ -fwhopr*\ *) CFLAGS="$CFLAGS -fno-whopr" ;;
+*\ -fuse-linker-plugin*\ *) CFLAGS="$CFLAGS -fno-use-linker-plugin" ;;
+esac
+
+dnl Parse the compiler output and extract the necessary
+dnl objects, libraries and library flags.
+if AC_TRY_EVAL(ac_compile); then
+ # Parse the compiler output and extract the necessary
+ # objects, libraries and library flags.
+
+ # Sentinel used to keep track of whether or not we are before
+ # the conftest object file.
+ pre_test_object_deps_done=no
+
+ for p in `eval "$output_verbose_link_cmd"`; do
+ case $prev$p in
+
+ -L* | -R* | -l*)
+ # Some compilers place space between "-{L,R}" and the path.
+ # Remove the space.
+ if test x-L = "$p" ||
+ test x-R = "$p"; then
+ prev=$p
+ continue
+ fi
+
+ # Expand the sysroot to ease extracting the directories later.
+ if test -z "$prev"; then
+ case $p in
+ -L*) func_stripname_cnf '-L' '' "$p"; prev=-L; p=$func_stripname_result ;;
+ -R*) func_stripname_cnf '-R' '' "$p"; prev=-R; p=$func_stripname_result ;;
+ -l*) func_stripname_cnf '-l' '' "$p"; prev=-l; p=$func_stripname_result ;;
+ esac
+ fi
+ case $p in
+ =*) func_stripname_cnf '=' '' "$p"; p=$lt_sysroot$func_stripname_result ;;
+ esac
+ if test no = "$pre_test_object_deps_done"; then
+ case $prev in
+ -L | -R)
+ # Internal compiler library paths should come after those
+ # provided the user. The postdeps already come after the
+ # user supplied libs so there is no need to process them.
+ if test -z "$_LT_TAGVAR(compiler_lib_search_path, $1)"; then
+ _LT_TAGVAR(compiler_lib_search_path, $1)=$prev$p
+ else
+ _LT_TAGVAR(compiler_lib_search_path, $1)="${_LT_TAGVAR(compiler_lib_search_path, $1)} $prev$p"
+ fi
+ ;;
+ # The "-l" case would never come before the object being
+ # linked, so don't bother handling this case.
+ esac
+ else
+ if test -z "$_LT_TAGVAR(postdeps, $1)"; then
+ _LT_TAGVAR(postdeps, $1)=$prev$p
+ else
+ _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} $prev$p"
+ fi
+ fi
+ prev=
+ ;;
+
+ *.lto.$objext) ;; # Ignore GCC LTO objects
+ *.$objext)
+ # This assumes that the test object file only shows up
+ # once in the compiler output.
+ if test "$p" = "conftest.$objext"; then
+ pre_test_object_deps_done=yes
+ continue
+ fi
+
+ if test no = "$pre_test_object_deps_done"; then
+ if test -z "$_LT_TAGVAR(predep_objects, $1)"; then
+ _LT_TAGVAR(predep_objects, $1)=$p
+ else
+ _LT_TAGVAR(predep_objects, $1)="$_LT_TAGVAR(predep_objects, $1) $p"
+ fi
+ else
+ if test -z "$_LT_TAGVAR(postdep_objects, $1)"; then
+ _LT_TAGVAR(postdep_objects, $1)=$p
+ else
+ _LT_TAGVAR(postdep_objects, $1)="$_LT_TAGVAR(postdep_objects, $1) $p"
+ fi
+ fi
+ ;;
+
+ *) ;; # Ignore the rest.
+
+ esac
+ done
+
+ # Clean up.
+ rm -f a.out a.exe
+else
+ echo "libtool.m4: error: problem compiling $1 test program"
+fi
+
+$RM -f confest.$objext
+CFLAGS=$_lt_libdeps_save_CFLAGS
+
+# PORTME: override above test on systems where it is broken
+m4_if([$1], [CXX],
+[case $host_os in
+interix[[3-9]]*)
+ # Interix 3.5 installs completely hosed .la files for C++, so rather than
+ # hack all around it, let's just trust "g++" to DTRT.
+ _LT_TAGVAR(predep_objects,$1)=
+ _LT_TAGVAR(postdep_objects,$1)=
+ _LT_TAGVAR(postdeps,$1)=
+ ;;
+esac
+])
+
+case " $_LT_TAGVAR(postdeps, $1) " in
+*" -lc "*) _LT_TAGVAR(archive_cmds_need_lc, $1)=no ;;
+esac
+ _LT_TAGVAR(compiler_lib_search_dirs, $1)=
+if test -n "${_LT_TAGVAR(compiler_lib_search_path, $1)}"; then
+ _LT_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_TAGVAR(compiler_lib_search_path, $1)}" | $SED -e 's! -L! !g' -e 's!^ !!'`
+fi
+_LT_TAGDECL([], [compiler_lib_search_dirs], [1],
+ [The directories searched by this compiler when creating a shared library])
+_LT_TAGDECL([], [predep_objects], [1],
+ [Dependencies to place before and after the objects being linked to
+ create a shared library])
+_LT_TAGDECL([], [postdep_objects], [1])
+_LT_TAGDECL([], [predeps], [1])
+_LT_TAGDECL([], [postdeps], [1])
+_LT_TAGDECL([], [compiler_lib_search_path], [1],
+ [The library search path used internally by the compiler when linking
+ a shared library])
+])# _LT_SYS_HIDDEN_LIBDEPS
+
+
+# _LT_LANG_F77_CONFIG([TAG])
+# --------------------------
+# Ensure that the configuration variables for a Fortran 77 compiler are
+# suitably defined. These variables are subsequently used by _LT_CONFIG
+# to write the compiler configuration to 'libtool'.
+m4_defun([_LT_LANG_F77_CONFIG],
+[AC_LANG_PUSH(Fortran 77)
+if test -z "$F77" || test no = "$F77"; then
+ _lt_disable_F77=yes
+fi
+
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+_LT_TAGVAR(allow_undefined_flag, $1)=
+_LT_TAGVAR(always_export_symbols, $1)=no
+_LT_TAGVAR(archive_expsym_cmds, $1)=
+_LT_TAGVAR(export_dynamic_flag_spec, $1)=
+_LT_TAGVAR(hardcode_direct, $1)=no
+_LT_TAGVAR(hardcode_direct_absolute, $1)=no
+_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+_LT_TAGVAR(hardcode_libdir_separator, $1)=
+_LT_TAGVAR(hardcode_minus_L, $1)=no
+_LT_TAGVAR(hardcode_automatic, $1)=no
+_LT_TAGVAR(inherit_rpath, $1)=no
+_LT_TAGVAR(module_cmds, $1)=
+_LT_TAGVAR(module_expsym_cmds, $1)=
+_LT_TAGVAR(link_all_deplibs, $1)=unknown
+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(reload_flag, $1)=$reload_flag
+_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
+_LT_TAGVAR(no_undefined_flag, $1)=
+_LT_TAGVAR(whole_archive_flag_spec, $1)=
+_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+
+# Source file extension for f77 test sources.
+ac_ext=f
+
+# Object file extension for compiled f77 test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# No sense in running all these tests if we already determined that
+# the F77 compiler isn't working. Some variables (like enable_shared)
+# are currently assumed to apply to all compilers on this platform,
+# and will be corrupted by setting them based on a non-working compiler.
+if test yes != "$_lt_disable_F77"; then
+ # Code to be used in simple compile tests
+ lt_simple_compile_test_code="\
+ subroutine t
+ return
+ end
+"
+
+ # Code to be used in simple link tests
+ lt_simple_link_test_code="\
+ program t
+ end
+"
+
+ # ltmain only uses $CC for tagged configurations so make sure $CC is set.
+ _LT_TAG_COMPILER
+
+ # save warnings/boilerplate of simple test code
+ _LT_COMPILER_BOILERPLATE
+ _LT_LINKER_BOILERPLATE
+
+ # Allow CC to be a program name with arguments.
+ lt_save_CC=$CC
+ lt_save_GCC=$GCC
+ lt_save_CFLAGS=$CFLAGS
+ CC=${F77-"f77"}
+ CFLAGS=$FFLAGS
+ compiler=$CC
+ _LT_TAGVAR(compiler, $1)=$CC
+ _LT_CC_BASENAME([$compiler])
+ GCC=$G77
+ if test -n "$compiler"; then
+ AC_MSG_CHECKING([if libtool supports shared libraries])
+ AC_MSG_RESULT([$can_build_shared])
+
+ AC_MSG_CHECKING([whether to build shared libraries])
+ test no = "$can_build_shared" && enable_shared=no
+
+ # On AIX, shared libraries and static libraries use the same namespace, and
+ # are all built from PIC.
+ case $host_os in
+ aix3*)
+ test yes = "$enable_shared" && enable_static=no
+ if test -n "$RANLIB"; then
+ archive_cmds="$archive_cmds~\$RANLIB \$lib"
+ postinstall_cmds='$RANLIB $lib'
+ fi
+ ;;
+ aix[[4-9]]*)
+ if test ia64 != "$host_cpu"; then
+ case $enable_shared,$with_aix_soname,$aix_use_runtimelinking in
+ yes,aix,yes) ;; # shared object as lib.so file only
+ yes,svr4,*) ;; # shared object as lib.so archive member only
+ yes,*) enable_static=no ;; # shared object in lib.a archive as well
+ esac
+ fi
+ ;;
+ esac
+ AC_MSG_RESULT([$enable_shared])
+
+ AC_MSG_CHECKING([whether to build static libraries])
+ # Make sure either enable_shared or enable_static is yes.
+ test yes = "$enable_shared" || enable_static=yes
+ AC_MSG_RESULT([$enable_static])
+
+ _LT_TAGVAR(GCC, $1)=$G77
+ _LT_TAGVAR(LD, $1)=$LD
+
+ ## CAVEAT EMPTOR:
+ ## There is no encapsulation within the following macros, do not change
+ ## the running order or otherwise move them around unless you know exactly
+ ## what you are doing...
+ _LT_COMPILER_PIC($1)
+ _LT_COMPILER_C_O($1)
+ _LT_COMPILER_FILE_LOCKS($1)
+ _LT_LINKER_SHLIBS($1)
+ _LT_SYS_DYNAMIC_LINKER($1)
+ _LT_LINKER_HARDCODE_LIBPATH($1)
+
+ _LT_CONFIG($1)
+ fi # test -n "$compiler"
+
+ GCC=$lt_save_GCC
+ CC=$lt_save_CC
+ CFLAGS=$lt_save_CFLAGS
+fi # test yes != "$_lt_disable_F77"
+
+AC_LANG_POP
+])# _LT_LANG_F77_CONFIG
+
+
+# _LT_LANG_FC_CONFIG([TAG])
+# -------------------------
+# Ensure that the configuration variables for a Fortran compiler are
+# suitably defined. These variables are subsequently used by _LT_CONFIG
+# to write the compiler configuration to 'libtool'.
+m4_defun([_LT_LANG_FC_CONFIG],
+[AC_LANG_PUSH(Fortran)
+
+if test -z "$FC" || test no = "$FC"; then
+ _lt_disable_FC=yes
+fi
+
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+_LT_TAGVAR(allow_undefined_flag, $1)=
+_LT_TAGVAR(always_export_symbols, $1)=no
+_LT_TAGVAR(archive_expsym_cmds, $1)=
+_LT_TAGVAR(export_dynamic_flag_spec, $1)=
+_LT_TAGVAR(hardcode_direct, $1)=no
+_LT_TAGVAR(hardcode_direct_absolute, $1)=no
+_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+_LT_TAGVAR(hardcode_libdir_separator, $1)=
+_LT_TAGVAR(hardcode_minus_L, $1)=no
+_LT_TAGVAR(hardcode_automatic, $1)=no
+_LT_TAGVAR(inherit_rpath, $1)=no
+_LT_TAGVAR(module_cmds, $1)=
+_LT_TAGVAR(module_expsym_cmds, $1)=
+_LT_TAGVAR(link_all_deplibs, $1)=unknown
+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(reload_flag, $1)=$reload_flag
+_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
+_LT_TAGVAR(no_undefined_flag, $1)=
+_LT_TAGVAR(whole_archive_flag_spec, $1)=
+_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+
+# Source file extension for fc test sources.
+ac_ext=${ac_fc_srcext-f}
+
+# Object file extension for compiled fc test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# No sense in running all these tests if we already determined that
+# the FC compiler isn't working. Some variables (like enable_shared)
+# are currently assumed to apply to all compilers on this platform,
+# and will be corrupted by setting them based on a non-working compiler.
+if test yes != "$_lt_disable_FC"; then
+ # Code to be used in simple compile tests
+ lt_simple_compile_test_code="\
+ subroutine t
+ return
+ end
+"
+
+ # Code to be used in simple link tests
+ lt_simple_link_test_code="\
+ program t
+ end
+"
+
+ # ltmain only uses $CC for tagged configurations so make sure $CC is set.
+ _LT_TAG_COMPILER
+
+ # save warnings/boilerplate of simple test code
+ _LT_COMPILER_BOILERPLATE
+ _LT_LINKER_BOILERPLATE
+
+ # Allow CC to be a program name with arguments.
+ lt_save_CC=$CC
+ lt_save_GCC=$GCC
+ lt_save_CFLAGS=$CFLAGS
+ CC=${FC-"f95"}
+ CFLAGS=$FCFLAGS
+ compiler=$CC
+ GCC=$ac_cv_fc_compiler_gnu
+
+ _LT_TAGVAR(compiler, $1)=$CC
+ _LT_CC_BASENAME([$compiler])
+
+ if test -n "$compiler"; then
+ AC_MSG_CHECKING([if libtool supports shared libraries])
+ AC_MSG_RESULT([$can_build_shared])
+
+ AC_MSG_CHECKING([whether to build shared libraries])
+ test no = "$can_build_shared" && enable_shared=no
+
+ # On AIX, shared libraries and static libraries use the same namespace, and
+ # are all built from PIC.
+ case $host_os in
+ aix3*)
+ test yes = "$enable_shared" && enable_static=no
+ if test -n "$RANLIB"; then
+ archive_cmds="$archive_cmds~\$RANLIB \$lib"
+ postinstall_cmds='$RANLIB $lib'
+ fi
+ ;;
+ aix[[4-9]]*)
+ if test ia64 != "$host_cpu"; then
+ case $enable_shared,$with_aix_soname,$aix_use_runtimelinking in
+ yes,aix,yes) ;; # shared object as lib.so file only
+ yes,svr4,*) ;; # shared object as lib.so archive member only
+ yes,*) enable_static=no ;; # shared object in lib.a archive as well
+ esac
+ fi
+ ;;
+ esac
+ AC_MSG_RESULT([$enable_shared])
+
+ AC_MSG_CHECKING([whether to build static libraries])
+ # Make sure either enable_shared or enable_static is yes.
+ test yes = "$enable_shared" || enable_static=yes
+ AC_MSG_RESULT([$enable_static])
+
+ _LT_TAGVAR(GCC, $1)=$ac_cv_fc_compiler_gnu
+ _LT_TAGVAR(LD, $1)=$LD
+
+ ## CAVEAT EMPTOR:
+ ## There is no encapsulation within the following macros, do not change
+ ## the running order or otherwise move them around unless you know exactly
+ ## what you are doing...
+ _LT_SYS_HIDDEN_LIBDEPS($1)
+ _LT_COMPILER_PIC($1)
+ _LT_COMPILER_C_O($1)
+ _LT_COMPILER_FILE_LOCKS($1)
+ _LT_LINKER_SHLIBS($1)
+ _LT_SYS_DYNAMIC_LINKER($1)
+ _LT_LINKER_HARDCODE_LIBPATH($1)
+
+ _LT_CONFIG($1)
+ fi # test -n "$compiler"
+
+ GCC=$lt_save_GCC
+ CC=$lt_save_CC
+ CFLAGS=$lt_save_CFLAGS
+fi # test yes != "$_lt_disable_FC"
+
+AC_LANG_POP
+])# _LT_LANG_FC_CONFIG
+
+
+# _LT_LANG_GCJ_CONFIG([TAG])
+# --------------------------
+# Ensure that the configuration variables for the GNU Java Compiler compiler
+# are suitably defined. These variables are subsequently used by _LT_CONFIG
+# to write the compiler configuration to 'libtool'.
+m4_defun([_LT_LANG_GCJ_CONFIG],
+[AC_REQUIRE([LT_PROG_GCJ])dnl
+AC_LANG_SAVE
+
+# Source file extension for Java test sources.
+ac_ext=java
+
+# Object file extension for compiled Java test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="class foo {}"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }'
+
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+_LT_TAG_COMPILER
+
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+
+# Allow CC to be a program name with arguments.
+lt_save_CC=$CC
+lt_save_CFLAGS=$CFLAGS
+lt_save_GCC=$GCC
+GCC=yes
+CC=${GCJ-"gcj"}
+CFLAGS=$GCJFLAGS
+compiler=$CC
+_LT_TAGVAR(compiler, $1)=$CC
+_LT_TAGVAR(LD, $1)=$LD
+_LT_CC_BASENAME([$compiler])
+
+# GCJ did not exist at the time GCC didn't implicitly link libc in.
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+
+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(reload_flag, $1)=$reload_flag
+_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
+
+if test -n "$compiler"; then
+ _LT_COMPILER_NO_RTTI($1)
+ _LT_COMPILER_PIC($1)
+ _LT_COMPILER_C_O($1)
+ _LT_COMPILER_FILE_LOCKS($1)
+ _LT_LINKER_SHLIBS($1)
+ _LT_LINKER_HARDCODE_LIBPATH($1)
+
+ _LT_CONFIG($1)
+fi
+
+AC_LANG_RESTORE
+
+GCC=$lt_save_GCC
+CC=$lt_save_CC
+CFLAGS=$lt_save_CFLAGS
+])# _LT_LANG_GCJ_CONFIG
+
+
+# _LT_LANG_GO_CONFIG([TAG])
+# --------------------------
+# Ensure that the configuration variables for the GNU Go compiler
+# are suitably defined. These variables are subsequently used by _LT_CONFIG
+# to write the compiler configuration to 'libtool'.
+m4_defun([_LT_LANG_GO_CONFIG],
+[AC_REQUIRE([LT_PROG_GO])dnl
+AC_LANG_SAVE
+
+# Source file extension for Go test sources.
+ac_ext=go
+
+# Object file extension for compiled Go test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="package main; func main() { }"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='package main; func main() { }'
+
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+_LT_TAG_COMPILER
+
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+
+# Allow CC to be a program name with arguments.
+lt_save_CC=$CC
+lt_save_CFLAGS=$CFLAGS
+lt_save_GCC=$GCC
+GCC=yes
+CC=${GOC-"gccgo"}
+CFLAGS=$GOFLAGS
+compiler=$CC
+_LT_TAGVAR(compiler, $1)=$CC
+_LT_TAGVAR(LD, $1)=$LD
+_LT_CC_BASENAME([$compiler])
+
+# Go did not exist at the time GCC didn't implicitly link libc in.
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+
+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(reload_flag, $1)=$reload_flag
+_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
+
+if test -n "$compiler"; then
+ _LT_COMPILER_NO_RTTI($1)
+ _LT_COMPILER_PIC($1)
+ _LT_COMPILER_C_O($1)
+ _LT_COMPILER_FILE_LOCKS($1)
+ _LT_LINKER_SHLIBS($1)
+ _LT_LINKER_HARDCODE_LIBPATH($1)
+
+ _LT_CONFIG($1)
+fi
+
+AC_LANG_RESTORE
+
+GCC=$lt_save_GCC
+CC=$lt_save_CC
+CFLAGS=$lt_save_CFLAGS
+])# _LT_LANG_GO_CONFIG
+
+
+# _LT_LANG_RC_CONFIG([TAG])
+# -------------------------
+# Ensure that the configuration variables for the Windows resource compiler
+# are suitably defined. These variables are subsequently used by _LT_CONFIG
+# to write the compiler configuration to 'libtool'.
+m4_defun([_LT_LANG_RC_CONFIG],
+[AC_REQUIRE([LT_PROG_RC])dnl
+AC_LANG_SAVE
+
+# Source file extension for RC test sources.
+ac_ext=rc
+
+# Object file extension for compiled RC test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }'
+
+# Code to be used in simple link tests
+lt_simple_link_test_code=$lt_simple_compile_test_code
+
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+_LT_TAG_COMPILER
+
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+
+# Allow CC to be a program name with arguments.
+lt_save_CC=$CC
+lt_save_CFLAGS=$CFLAGS
+lt_save_GCC=$GCC
+GCC=
+CC=${RC-"windres"}
+CFLAGS=
+compiler=$CC
+_LT_TAGVAR(compiler, $1)=$CC
+_LT_CC_BASENAME([$compiler])
+_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
+
+if test -n "$compiler"; then
+ :
+ _LT_CONFIG($1)
+fi
+
+GCC=$lt_save_GCC
+AC_LANG_RESTORE
+CC=$lt_save_CC
+CFLAGS=$lt_save_CFLAGS
+])# _LT_LANG_RC_CONFIG
+
+
+# LT_PROG_GCJ
+# -----------
+AC_DEFUN([LT_PROG_GCJ],
+[m4_ifdef([AC_PROG_GCJ], [AC_PROG_GCJ],
+ [m4_ifdef([A][M_PROG_GCJ], [A][M_PROG_GCJ],
+ [AC_CHECK_TOOL(GCJ, gcj,)
+ test set = "${GCJFLAGS+set}" || GCJFLAGS="-g -O2"
+ AC_SUBST(GCJFLAGS)])])[]dnl
+])
+
+# Old name:
+AU_ALIAS([LT_AC_PROG_GCJ], [LT_PROG_GCJ])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([LT_AC_PROG_GCJ], [])
+
+
+# LT_PROG_GO
+# ----------
+AC_DEFUN([LT_PROG_GO],
+[AC_CHECK_TOOL(GOC, gccgo,)
+])
+
+
+# LT_PROG_RC
+# ----------
+AC_DEFUN([LT_PROG_RC],
+[AC_CHECK_TOOL(RC, windres,)
+])
+
+# Old name:
+AU_ALIAS([LT_AC_PROG_RC], [LT_PROG_RC])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([LT_AC_PROG_RC], [])
+
+
+# _LT_DECL_EGREP
+# --------------
+# If we don't have a new enough Autoconf to choose the best grep
+# available, choose the one first in the user's PATH.
+m4_defun([_LT_DECL_EGREP],
+[AC_REQUIRE([AC_PROG_EGREP])dnl
+AC_REQUIRE([AC_PROG_FGREP])dnl
+test -z "$GREP" && GREP=grep
+_LT_DECL([], [GREP], [1], [A grep program that handles long lines])
+_LT_DECL([], [EGREP], [1], [An ERE matcher])
+_LT_DECL([], [FGREP], [1], [A literal string matcher])
+dnl Non-bleeding-edge autoconf doesn't subst GREP, so do it here too
+AC_SUBST([GREP])
+])
+
+
+# _LT_DECL_OBJDUMP
+# --------------
+# If we don't have a new enough Autoconf to choose the best objdump
+# available, choose the one first in the user's PATH.
+m4_defun([_LT_DECL_OBJDUMP],
+[AC_CHECK_TOOL(OBJDUMP, objdump, false)
+test -z "$OBJDUMP" && OBJDUMP=objdump
+_LT_DECL([], [OBJDUMP], [1], [An object symbol dumper])
+AC_SUBST([OBJDUMP])
+])
+
+# _LT_DECL_DLLTOOL
+# ----------------
+# Ensure DLLTOOL variable is set.
+m4_defun([_LT_DECL_DLLTOOL],
+[AC_CHECK_TOOL(DLLTOOL, dlltool, false)
+test -z "$DLLTOOL" && DLLTOOL=dlltool
+_LT_DECL([], [DLLTOOL], [1], [DLL creation program])
+AC_SUBST([DLLTOOL])
+])
+
+# _LT_DECL_SED
+# ------------
+# Check for a fully-functional sed program, that truncates
+# as few characters as possible. Prefer GNU sed if found.
+m4_defun([_LT_DECL_SED],
+[AC_PROG_SED
+test -z "$SED" && SED=sed
+Xsed="$SED -e 1s/^X//"
+_LT_DECL([], [SED], [1], [A sed program that does not truncate output])
+_LT_DECL([], [Xsed], ["\$SED -e 1s/^X//"],
+ [Sed that helps us avoid accidentally triggering echo(1) options like -n])
+])# _LT_DECL_SED
+
+m4_ifndef([AC_PROG_SED], [
+# NOTE: This macro has been submitted for inclusion into #
+# GNU Autoconf as AC_PROG_SED. When it is available in #
+# a released version of Autoconf we should remove this #
+# macro and use it instead. #
+
+m4_defun([AC_PROG_SED],
+[AC_MSG_CHECKING([for a sed that does not truncate output])
+AC_CACHE_VAL(lt_cv_path_SED,
+[# Loop through the user's path and test for sed and gsed.
+# Then use that list of sed's as ones to test for truncation.
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for lt_ac_prog in sed gsed; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then
+ lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext"
+ fi
+ done
+ done
+done
+IFS=$as_save_IFS
+lt_ac_max=0
+lt_ac_count=0
+# Add /usr/xpg4/bin/sed as it is typically found on Solaris
+# along with /bin/sed that truncates output.
+for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
+ test ! -f "$lt_ac_sed" && continue
+ cat /dev/null > conftest.in
+ lt_ac_count=0
+ echo $ECHO_N "0123456789$ECHO_C" >conftest.in
+ # Check for GNU sed and select it if it is found.
+ if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then
+ lt_cv_path_SED=$lt_ac_sed
+ break
+ fi
+ while true; do
+ cat conftest.in conftest.in >conftest.tmp
+ mv conftest.tmp conftest.in
+ cp conftest.in conftest.nl
+ echo >>conftest.nl
+ $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break
+ cmp -s conftest.out conftest.nl || break
+ # 10000 chars as input seems more than enough
+ test 10 -lt "$lt_ac_count" && break
+ lt_ac_count=`expr $lt_ac_count + 1`
+ if test "$lt_ac_count" -gt "$lt_ac_max"; then
+ lt_ac_max=$lt_ac_count
+ lt_cv_path_SED=$lt_ac_sed
+ fi
+ done
+done
+])
+SED=$lt_cv_path_SED
+AC_SUBST([SED])
+AC_MSG_RESULT([$SED])
+])#AC_PROG_SED
+])#m4_ifndef
+
+# Old name:
+AU_ALIAS([LT_AC_PROG_SED], [AC_PROG_SED])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([LT_AC_PROG_SED], [])
+
+
+# _LT_CHECK_SHELL_FEATURES
+# ------------------------
+# Find out whether the shell is Bourne or XSI compatible,
+# or has some other useful features.
+m4_defun([_LT_CHECK_SHELL_FEATURES],
+[if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+ lt_unset=unset
+else
+ lt_unset=false
+fi
+_LT_DECL([], [lt_unset], [0], [whether the shell understands "unset"])dnl
+
+# test EBCDIC or ASCII
+case `echo X|tr X '\101'` in
+ A) # ASCII based system
+ # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
+ lt_SP2NL='tr \040 \012'
+ lt_NL2SP='tr \015\012 \040\040'
+ ;;
+ *) # EBCDIC based system
+ lt_SP2NL='tr \100 \n'
+ lt_NL2SP='tr \r\n \100\100'
+ ;;
+esac
+_LT_DECL([SP2NL], [lt_SP2NL], [1], [turn spaces into newlines])dnl
+_LT_DECL([NL2SP], [lt_NL2SP], [1], [turn newlines into spaces])dnl
+])# _LT_CHECK_SHELL_FEATURES
+
+
+# _LT_PATH_CONVERSION_FUNCTIONS
+# -----------------------------
+# Determine what file name conversion functions should be used by
+# func_to_host_file (and, implicitly, by func_to_host_path). These are needed
+# for certain cross-compile configurations and native mingw.
+m4_defun([_LT_PATH_CONVERSION_FUNCTIONS],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+AC_MSG_CHECKING([how to convert $build file names to $host format])
+AC_CACHE_VAL(lt_cv_to_host_file_cmd,
+[case $host in
+ *-*-mingw* )
+ case $build in
+ *-*-mingw* ) # actually msys
+ lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32
+ ;;
+ *-*-cygwin* )
+ lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32
+ ;;
+ * ) # otherwise, assume *nix
+ lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32
+ ;;
+ esac
+ ;;
+ *-*-cygwin* )
+ case $build in
+ *-*-mingw* ) # actually msys
+ lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin
+ ;;
+ *-*-cygwin* )
+ lt_cv_to_host_file_cmd=func_convert_file_noop
+ ;;
+ * ) # otherwise, assume *nix
+ lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin
+ ;;
+ esac
+ ;;
+ * ) # unhandled hosts (and "normal" native builds)
+ lt_cv_to_host_file_cmd=func_convert_file_noop
+ ;;
+esac
+])
+to_host_file_cmd=$lt_cv_to_host_file_cmd
+AC_MSG_RESULT([$lt_cv_to_host_file_cmd])
+_LT_DECL([to_host_file_cmd], [lt_cv_to_host_file_cmd],
+ [0], [convert $build file names to $host format])dnl
+
+AC_MSG_CHECKING([how to convert $build file names to toolchain format])
+AC_CACHE_VAL(lt_cv_to_tool_file_cmd,
+[#assume ordinary cross tools, or native build.
+lt_cv_to_tool_file_cmd=func_convert_file_noop
+case $host in
+ *-*-mingw* )
+ case $build in
+ *-*-mingw* ) # actually msys
+ lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32
+ ;;
+ esac
+ ;;
+esac
+])
+to_tool_file_cmd=$lt_cv_to_tool_file_cmd
+AC_MSG_RESULT([$lt_cv_to_tool_file_cmd])
+_LT_DECL([to_tool_file_cmd], [lt_cv_to_tool_file_cmd],
+ [0], [convert $build files to toolchain format])dnl
+])# _LT_PATH_CONVERSION_FUNCTIONS
+
+# Helper functions for option handling. -*- Autoconf -*-
+#
+# Copyright (C) 2004-2005, 2007-2009, 2011-2015 Free Software
+# Foundation, Inc.
+# Written by Gary V. Vaughan, 2004
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+
+# serial 8 ltoptions.m4
+
+# This is to help aclocal find these macros, as it can't see m4_define.
+AC_DEFUN([LTOPTIONS_VERSION], [m4_if([1])])
+
+
+# _LT_MANGLE_OPTION(MACRO-NAME, OPTION-NAME)
+# ------------------------------------------
+m4_define([_LT_MANGLE_OPTION],
+[[_LT_OPTION_]m4_bpatsubst($1__$2, [[^a-zA-Z0-9_]], [_])])
+
+
+# _LT_SET_OPTION(MACRO-NAME, OPTION-NAME)
+# ---------------------------------------
+# Set option OPTION-NAME for macro MACRO-NAME, and if there is a
+# matching handler defined, dispatch to it. Other OPTION-NAMEs are
+# saved as a flag.
+m4_define([_LT_SET_OPTION],
+[m4_define(_LT_MANGLE_OPTION([$1], [$2]))dnl
+m4_ifdef(_LT_MANGLE_DEFUN([$1], [$2]),
+ _LT_MANGLE_DEFUN([$1], [$2]),
+ [m4_warning([Unknown $1 option '$2'])])[]dnl
+])
+
+
+# _LT_IF_OPTION(MACRO-NAME, OPTION-NAME, IF-SET, [IF-NOT-SET])
+# ------------------------------------------------------------
+# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
+m4_define([_LT_IF_OPTION],
+[m4_ifdef(_LT_MANGLE_OPTION([$1], [$2]), [$3], [$4])])
+
+
+# _LT_UNLESS_OPTIONS(MACRO-NAME, OPTION-LIST, IF-NOT-SET)
+# -------------------------------------------------------
+# Execute IF-NOT-SET unless all options in OPTION-LIST for MACRO-NAME
+# are set.
+m4_define([_LT_UNLESS_OPTIONS],
+[m4_foreach([_LT_Option], m4_split(m4_normalize([$2])),
+ [m4_ifdef(_LT_MANGLE_OPTION([$1], _LT_Option),
+ [m4_define([$0_found])])])[]dnl
+m4_ifdef([$0_found], [m4_undefine([$0_found])], [$3
+])[]dnl
+])
+
+
+# _LT_SET_OPTIONS(MACRO-NAME, OPTION-LIST)
+# ----------------------------------------
+# OPTION-LIST is a space-separated list of Libtool options associated
+# with MACRO-NAME. If any OPTION has a matching handler declared with
+# LT_OPTION_DEFINE, dispatch to that macro; otherwise complain about
+# the unknown option and exit.
+m4_defun([_LT_SET_OPTIONS],
+[# Set options
+m4_foreach([_LT_Option], m4_split(m4_normalize([$2])),
+ [_LT_SET_OPTION([$1], _LT_Option)])
+
+m4_if([$1],[LT_INIT],[
+ dnl
+ dnl Simply set some default values (i.e off) if boolean options were not
+ dnl specified:
+ _LT_UNLESS_OPTIONS([LT_INIT], [dlopen], [enable_dlopen=no
+ ])
+ _LT_UNLESS_OPTIONS([LT_INIT], [win32-dll], [enable_win32_dll=no
+ ])
+ dnl
+ dnl If no reference was made to various pairs of opposing options, then
+ dnl we run the default mode handler for the pair. For example, if neither
+ dnl 'shared' nor 'disable-shared' was passed, we enable building of shared
+ dnl archives by default:
+ _LT_UNLESS_OPTIONS([LT_INIT], [shared disable-shared], [_LT_ENABLE_SHARED])
+ _LT_UNLESS_OPTIONS([LT_INIT], [static disable-static], [_LT_ENABLE_STATIC])
+ _LT_UNLESS_OPTIONS([LT_INIT], [pic-only no-pic], [_LT_WITH_PIC])
+ _LT_UNLESS_OPTIONS([LT_INIT], [fast-install disable-fast-install],
+ [_LT_ENABLE_FAST_INSTALL])
+ _LT_UNLESS_OPTIONS([LT_INIT], [aix-soname=aix aix-soname=both aix-soname=svr4],
+ [_LT_WITH_AIX_SONAME([aix])])
+ ])
+])# _LT_SET_OPTIONS
+
+
+
+# _LT_MANGLE_DEFUN(MACRO-NAME, OPTION-NAME)
+# -----------------------------------------
+m4_define([_LT_MANGLE_DEFUN],
+[[_LT_OPTION_DEFUN_]m4_bpatsubst(m4_toupper([$1__$2]), [[^A-Z0-9_]], [_])])
+
+
+# LT_OPTION_DEFINE(MACRO-NAME, OPTION-NAME, CODE)
+# -----------------------------------------------
+m4_define([LT_OPTION_DEFINE],
+[m4_define(_LT_MANGLE_DEFUN([$1], [$2]), [$3])[]dnl
+])# LT_OPTION_DEFINE
+
+
+# dlopen
+# ------
+LT_OPTION_DEFINE([LT_INIT], [dlopen], [enable_dlopen=yes
+])
+
+AU_DEFUN([AC_LIBTOOL_DLOPEN],
+[_LT_SET_OPTION([LT_INIT], [dlopen])
+AC_DIAGNOSE([obsolete],
+[$0: Remove this warning and the call to _LT_SET_OPTION when you
+put the 'dlopen' option into LT_INIT's first parameter.])
+])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_DLOPEN], [])
+
+
+# win32-dll
+# ---------
+# Declare package support for building win32 dll's.
+LT_OPTION_DEFINE([LT_INIT], [win32-dll],
+[enable_win32_dll=yes
+
+case $host in
+*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-cegcc*)
+ AC_CHECK_TOOL(AS, as, false)
+ AC_CHECK_TOOL(DLLTOOL, dlltool, false)
+ AC_CHECK_TOOL(OBJDUMP, objdump, false)
+ ;;
+esac
+
+test -z "$AS" && AS=as
+_LT_DECL([], [AS], [1], [Assembler program])dnl
+
+test -z "$DLLTOOL" && DLLTOOL=dlltool
+_LT_DECL([], [DLLTOOL], [1], [DLL creation program])dnl
+
+test -z "$OBJDUMP" && OBJDUMP=objdump
+_LT_DECL([], [OBJDUMP], [1], [Object dumper program])dnl
+])# win32-dll
+
+AU_DEFUN([AC_LIBTOOL_WIN32_DLL],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+_LT_SET_OPTION([LT_INIT], [win32-dll])
+AC_DIAGNOSE([obsolete],
+[$0: Remove this warning and the call to _LT_SET_OPTION when you
+put the 'win32-dll' option into LT_INIT's first parameter.])
+])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_WIN32_DLL], [])
+
+
+# _LT_ENABLE_SHARED([DEFAULT])
+# ----------------------------
+# implement the --enable-shared flag, and supports the 'shared' and
+# 'disable-shared' LT_INIT options.
+# DEFAULT is either 'yes' or 'no'. If omitted, it defaults to 'yes'.
+m4_define([_LT_ENABLE_SHARED],
+[m4_define([_LT_ENABLE_SHARED_DEFAULT], [m4_if($1, no, no, yes)])dnl
+AC_ARG_ENABLE([shared],
+ [AS_HELP_STRING([--enable-shared@<:@=PKGS@:>@],
+ [build shared libraries @<:@default=]_LT_ENABLE_SHARED_DEFAULT[@:>@])],
+ [p=${PACKAGE-default}
+ case $enableval in
+ yes) enable_shared=yes ;;
+ no) enable_shared=no ;;
+ *)
+ enable_shared=no
+ # Look at the argument we got. We use all the common list separators.
+ lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
+ for pkg in $enableval; do
+ IFS=$lt_save_ifs
+ if test "X$pkg" = "X$p"; then
+ enable_shared=yes
+ fi
+ done
+ IFS=$lt_save_ifs
+ ;;
+ esac],
+ [enable_shared=]_LT_ENABLE_SHARED_DEFAULT)
+
+ _LT_DECL([build_libtool_libs], [enable_shared], [0],
+ [Whether or not to build shared libraries])
+])# _LT_ENABLE_SHARED
+
+LT_OPTION_DEFINE([LT_INIT], [shared], [_LT_ENABLE_SHARED([yes])])
+LT_OPTION_DEFINE([LT_INIT], [disable-shared], [_LT_ENABLE_SHARED([no])])
+
+# Old names:
+AC_DEFUN([AC_ENABLE_SHARED],
+[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[shared])
+])
+
+AC_DEFUN([AC_DISABLE_SHARED],
+[_LT_SET_OPTION([LT_INIT], [disable-shared])
+])
+
+AU_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)])
+AU_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AM_ENABLE_SHARED], [])
+dnl AC_DEFUN([AM_DISABLE_SHARED], [])
+
+
+
+# _LT_ENABLE_STATIC([DEFAULT])
+# ----------------------------
+# implement the --enable-static flag, and support the 'static' and
+# 'disable-static' LT_INIT options.
+# DEFAULT is either 'yes' or 'no'. If omitted, it defaults to 'yes'.
+m4_define([_LT_ENABLE_STATIC],
+[m4_define([_LT_ENABLE_STATIC_DEFAULT], [m4_if($1, no, no, yes)])dnl
+AC_ARG_ENABLE([static],
+ [AS_HELP_STRING([--enable-static@<:@=PKGS@:>@],
+ [build static libraries @<:@default=]_LT_ENABLE_STATIC_DEFAULT[@:>@])],
+ [p=${PACKAGE-default}
+ case $enableval in
+ yes) enable_static=yes ;;
+ no) enable_static=no ;;
+ *)
+ enable_static=no
+ # Look at the argument we got. We use all the common list separators.
+ lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
+ for pkg in $enableval; do
+ IFS=$lt_save_ifs
+ if test "X$pkg" = "X$p"; then
+ enable_static=yes
+ fi
+ done
+ IFS=$lt_save_ifs
+ ;;
+ esac],
+ [enable_static=]_LT_ENABLE_STATIC_DEFAULT)
+
+ _LT_DECL([build_old_libs], [enable_static], [0],
+ [Whether or not to build static libraries])
+])# _LT_ENABLE_STATIC
+
+LT_OPTION_DEFINE([LT_INIT], [static], [_LT_ENABLE_STATIC([yes])])
+LT_OPTION_DEFINE([LT_INIT], [disable-static], [_LT_ENABLE_STATIC([no])])
+
+# Old names:
+AC_DEFUN([AC_ENABLE_STATIC],
+[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[static])
+])
+
+AC_DEFUN([AC_DISABLE_STATIC],
+[_LT_SET_OPTION([LT_INIT], [disable-static])
+])
+
+AU_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)])
+AU_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AM_ENABLE_STATIC], [])
+dnl AC_DEFUN([AM_DISABLE_STATIC], [])
+
+
+
+# _LT_ENABLE_FAST_INSTALL([DEFAULT])
+# ----------------------------------
+# implement the --enable-fast-install flag, and support the 'fast-install'
+# and 'disable-fast-install' LT_INIT options.
+# DEFAULT is either 'yes' or 'no'. If omitted, it defaults to 'yes'.
+m4_define([_LT_ENABLE_FAST_INSTALL],
+[m4_define([_LT_ENABLE_FAST_INSTALL_DEFAULT], [m4_if($1, no, no, yes)])dnl
+AC_ARG_ENABLE([fast-install],
+ [AS_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@],
+ [optimize for fast installation @<:@default=]_LT_ENABLE_FAST_INSTALL_DEFAULT[@:>@])],
+ [p=${PACKAGE-default}
+ case $enableval in
+ yes) enable_fast_install=yes ;;
+ no) enable_fast_install=no ;;
+ *)
+ enable_fast_install=no
+ # Look at the argument we got. We use all the common list separators.
+ lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
+ for pkg in $enableval; do
+ IFS=$lt_save_ifs
+ if test "X$pkg" = "X$p"; then
+ enable_fast_install=yes
+ fi
+ done
+ IFS=$lt_save_ifs
+ ;;
+ esac],
+ [enable_fast_install=]_LT_ENABLE_FAST_INSTALL_DEFAULT)
+
+_LT_DECL([fast_install], [enable_fast_install], [0],
+ [Whether or not to optimize for fast installation])dnl
+])# _LT_ENABLE_FAST_INSTALL
+
+LT_OPTION_DEFINE([LT_INIT], [fast-install], [_LT_ENABLE_FAST_INSTALL([yes])])
+LT_OPTION_DEFINE([LT_INIT], [disable-fast-install], [_LT_ENABLE_FAST_INSTALL([no])])
+
+# Old names:
+AU_DEFUN([AC_ENABLE_FAST_INSTALL],
+[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[fast-install])
+AC_DIAGNOSE([obsolete],
+[$0: Remove this warning and the call to _LT_SET_OPTION when you put
+the 'fast-install' option into LT_INIT's first parameter.])
+])
+
+AU_DEFUN([AC_DISABLE_FAST_INSTALL],
+[_LT_SET_OPTION([LT_INIT], [disable-fast-install])
+AC_DIAGNOSE([obsolete],
+[$0: Remove this warning and the call to _LT_SET_OPTION when you put
+the 'disable-fast-install' option into LT_INIT's first parameter.])
+])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_ENABLE_FAST_INSTALL], [])
+dnl AC_DEFUN([AM_DISABLE_FAST_INSTALL], [])
+
+
+# _LT_WITH_AIX_SONAME([DEFAULT])
+# ----------------------------------
+# implement the --with-aix-soname flag, and support the `aix-soname=aix'
+# and `aix-soname=both' and `aix-soname=svr4' LT_INIT options. DEFAULT
+# is either `aix', `both' or `svr4'. If omitted, it defaults to `aix'.
+m4_define([_LT_WITH_AIX_SONAME],
+[m4_define([_LT_WITH_AIX_SONAME_DEFAULT], [m4_if($1, svr4, svr4, m4_if($1, both, both, aix))])dnl
+shared_archive_member_spec=
+case $host,$enable_shared in
+power*-*-aix[[5-9]]*,yes)
+ AC_MSG_CHECKING([which variant of shared library versioning to provide])
+ AC_ARG_WITH([aix-soname],
+ [AS_HELP_STRING([--with-aix-soname=aix|svr4|both],
+ [shared library versioning (aka "SONAME") variant to provide on AIX, @<:@default=]_LT_WITH_AIX_SONAME_DEFAULT[@:>@.])],
+ [case $withval in
+ aix|svr4|both)
+ ;;
+ *)
+ AC_MSG_ERROR([Unknown argument to --with-aix-soname])
+ ;;
+ esac
+ lt_cv_with_aix_soname=$with_aix_soname],
+ [AC_CACHE_VAL([lt_cv_with_aix_soname],
+ [lt_cv_with_aix_soname=]_LT_WITH_AIX_SONAME_DEFAULT)
+ with_aix_soname=$lt_cv_with_aix_soname])
+ AC_MSG_RESULT([$with_aix_soname])
+ if test aix != "$with_aix_soname"; then
+ # For the AIX way of multilib, we name the shared archive member
+ # based on the bitwidth used, traditionally 'shr.o' or 'shr_64.o',
+ # and 'shr.imp' or 'shr_64.imp', respectively, for the Import File.
+ # Even when GNU compilers ignore OBJECT_MODE but need '-maix64' flag,
+ # the AIX toolchain works better with OBJECT_MODE set (default 32).
+ if test 64 = "${OBJECT_MODE-32}"; then
+ shared_archive_member_spec=shr_64
+ else
+ shared_archive_member_spec=shr
+ fi
+ fi
+ ;;
+*)
+ with_aix_soname=aix
+ ;;
+esac
+
+_LT_DECL([], [shared_archive_member_spec], [0],
+ [Shared archive member basename, for filename based shared library versioning on AIX])dnl
+])# _LT_WITH_AIX_SONAME
+
+LT_OPTION_DEFINE([LT_INIT], [aix-soname=aix], [_LT_WITH_AIX_SONAME([aix])])
+LT_OPTION_DEFINE([LT_INIT], [aix-soname=both], [_LT_WITH_AIX_SONAME([both])])
+LT_OPTION_DEFINE([LT_INIT], [aix-soname=svr4], [_LT_WITH_AIX_SONAME([svr4])])
+
+
+# _LT_WITH_PIC([MODE])
+# --------------------
+# implement the --with-pic flag, and support the 'pic-only' and 'no-pic'
+# LT_INIT options.
+# MODE is either 'yes' or 'no'. If omitted, it defaults to 'both'.
+m4_define([_LT_WITH_PIC],
+[AC_ARG_WITH([pic],
+ [AS_HELP_STRING([--with-pic@<:@=PKGS@:>@],
+ [try to use only PIC/non-PIC objects @<:@default=use both@:>@])],
+ [lt_p=${PACKAGE-default}
+ case $withval in
+ yes|no) pic_mode=$withval ;;
+ *)
+ pic_mode=default
+ # Look at the argument we got. We use all the common list separators.
+ lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
+ for lt_pkg in $withval; do
+ IFS=$lt_save_ifs
+ if test "X$lt_pkg" = "X$lt_p"; then
+ pic_mode=yes
+ fi
+ done
+ IFS=$lt_save_ifs
+ ;;
+ esac],
+ [pic_mode=m4_default([$1], [default])])
+
+_LT_DECL([], [pic_mode], [0], [What type of objects to build])dnl
+])# _LT_WITH_PIC
+
+LT_OPTION_DEFINE([LT_INIT], [pic-only], [_LT_WITH_PIC([yes])])
+LT_OPTION_DEFINE([LT_INIT], [no-pic], [_LT_WITH_PIC([no])])
+
+# Old name:
+AU_DEFUN([AC_LIBTOOL_PICMODE],
+[_LT_SET_OPTION([LT_INIT], [pic-only])
+AC_DIAGNOSE([obsolete],
+[$0: Remove this warning and the call to _LT_SET_OPTION when you
+put the 'pic-only' option into LT_INIT's first parameter.])
+])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_PICMODE], [])
+
+
+m4_define([_LTDL_MODE], [])
+LT_OPTION_DEFINE([LTDL_INIT], [nonrecursive],
+ [m4_define([_LTDL_MODE], [nonrecursive])])
+LT_OPTION_DEFINE([LTDL_INIT], [recursive],
+ [m4_define([_LTDL_MODE], [recursive])])
+LT_OPTION_DEFINE([LTDL_INIT], [subproject],
+ [m4_define([_LTDL_MODE], [subproject])])
+
+m4_define([_LTDL_TYPE], [])
+LT_OPTION_DEFINE([LTDL_INIT], [installable],
+ [m4_define([_LTDL_TYPE], [installable])])
+LT_OPTION_DEFINE([LTDL_INIT], [convenience],
+ [m4_define([_LTDL_TYPE], [convenience])])
+
+# ltsugar.m4 -- libtool m4 base layer. -*-Autoconf-*-
+#
+# Copyright (C) 2004-2005, 2007-2008, 2011-2015 Free Software
+# Foundation, Inc.
+# Written by Gary V. Vaughan, 2004
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+
+# serial 6 ltsugar.m4
+
+# This is to help aclocal find these macros, as it can't see m4_define.
+AC_DEFUN([LTSUGAR_VERSION], [m4_if([0.1])])
+
+
+# lt_join(SEP, ARG1, [ARG2...])
+# -----------------------------
+# Produce ARG1SEPARG2...SEPARGn, omitting [] arguments and their
+# associated separator.
+# Needed until we can rely on m4_join from Autoconf 2.62, since all earlier
+# versions in m4sugar had bugs.
+m4_define([lt_join],
+[m4_if([$#], [1], [],
+ [$#], [2], [[$2]],
+ [m4_if([$2], [], [], [[$2]_])$0([$1], m4_shift(m4_shift($@)))])])
+m4_define([_lt_join],
+[m4_if([$#$2], [2], [],
+ [m4_if([$2], [], [], [[$1$2]])$0([$1], m4_shift(m4_shift($@)))])])
+
+
+# lt_car(LIST)
+# lt_cdr(LIST)
+# ------------
+# Manipulate m4 lists.
+# These macros are necessary as long as will still need to support
+# Autoconf-2.59, which quotes differently.
+m4_define([lt_car], [[$1]])
+m4_define([lt_cdr],
+[m4_if([$#], 0, [m4_fatal([$0: cannot be called without arguments])],
+ [$#], 1, [],
+ [m4_dquote(m4_shift($@))])])
+m4_define([lt_unquote], $1)
+
+
+# lt_append(MACRO-NAME, STRING, [SEPARATOR])
+# ------------------------------------------
+# Redefine MACRO-NAME to hold its former content plus 'SEPARATOR''STRING'.
+# Note that neither SEPARATOR nor STRING are expanded; they are appended
+# to MACRO-NAME as is (leaving the expansion for when MACRO-NAME is invoked).
+# No SEPARATOR is output if MACRO-NAME was previously undefined (different
+# than defined and empty).
+#
+# This macro is needed until we can rely on Autoconf 2.62, since earlier
+# versions of m4sugar mistakenly expanded SEPARATOR but not STRING.
+m4_define([lt_append],
+[m4_define([$1],
+ m4_ifdef([$1], [m4_defn([$1])[$3]])[$2])])
+
+
+
+# lt_combine(SEP, PREFIX-LIST, INFIX, SUFFIX1, [SUFFIX2...])
+# ----------------------------------------------------------
+# Produce a SEP delimited list of all paired combinations of elements of
+# PREFIX-LIST with SUFFIX1 through SUFFIXn. Each element of the list
+# has the form PREFIXmINFIXSUFFIXn.
+# Needed until we can rely on m4_combine added in Autoconf 2.62.
+m4_define([lt_combine],
+[m4_if(m4_eval([$# > 3]), [1],
+ [m4_pushdef([_Lt_sep], [m4_define([_Lt_sep], m4_defn([lt_car]))])]]dnl
+[[m4_foreach([_Lt_prefix], [$2],
+ [m4_foreach([_Lt_suffix],
+ ]m4_dquote(m4_dquote(m4_shift(m4_shift(m4_shift($@)))))[,
+ [_Lt_sep([$1])[]m4_defn([_Lt_prefix])[$3]m4_defn([_Lt_suffix])])])])])
+
+
+# lt_if_append_uniq(MACRO-NAME, VARNAME, [SEPARATOR], [UNIQ], [NOT-UNIQ])
+# -----------------------------------------------------------------------
+# Iff MACRO-NAME does not yet contain VARNAME, then append it (delimited
+# by SEPARATOR if supplied) and expand UNIQ, else NOT-UNIQ.
+m4_define([lt_if_append_uniq],
+[m4_ifdef([$1],
+ [m4_if(m4_index([$3]m4_defn([$1])[$3], [$3$2$3]), [-1],
+ [lt_append([$1], [$2], [$3])$4],
+ [$5])],
+ [lt_append([$1], [$2], [$3])$4])])
+
+
+# lt_dict_add(DICT, KEY, VALUE)
+# -----------------------------
+m4_define([lt_dict_add],
+[m4_define([$1($2)], [$3])])
+
+
+# lt_dict_add_subkey(DICT, KEY, SUBKEY, VALUE)
+# --------------------------------------------
+m4_define([lt_dict_add_subkey],
+[m4_define([$1($2:$3)], [$4])])
+
+
+# lt_dict_fetch(DICT, KEY, [SUBKEY])
+# ----------------------------------
+m4_define([lt_dict_fetch],
+[m4_ifval([$3],
+ m4_ifdef([$1($2:$3)], [m4_defn([$1($2:$3)])]),
+ m4_ifdef([$1($2)], [m4_defn([$1($2)])]))])
+
+
+# lt_if_dict_fetch(DICT, KEY, [SUBKEY], VALUE, IF-TRUE, [IF-FALSE])
+# -----------------------------------------------------------------
+m4_define([lt_if_dict_fetch],
+[m4_if(lt_dict_fetch([$1], [$2], [$3]), [$4],
+ [$5],
+ [$6])])
+
+
+# lt_dict_filter(DICT, [SUBKEY], VALUE, [SEPARATOR], KEY, [...])
+# --------------------------------------------------------------
+m4_define([lt_dict_filter],
+[m4_if([$5], [], [],
+ [lt_join(m4_quote(m4_default([$4], [[, ]])),
+ lt_unquote(m4_split(m4_normalize(m4_foreach(_Lt_key, lt_car([m4_shiftn(4, $@)]),
+ [lt_if_dict_fetch([$1], _Lt_key, [$2], [$3], [_Lt_key ])])))))])[]dnl
+])
+
+# ltversion.m4 -- version numbers -*- Autoconf -*-
+#
+# Copyright (C) 2004, 2011-2015 Free Software Foundation, Inc.
+# Written by Scott James Remnant, 2004
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+
+# @configure_input@
+
+# serial 4179 ltversion.m4
+# This file is part of GNU Libtool
+
+m4_define([LT_PACKAGE_VERSION], [2.4.6])
+m4_define([LT_PACKAGE_REVISION], [2.4.6])
+
+AC_DEFUN([LTVERSION_VERSION],
+[macro_version='2.4.6'
+macro_revision='2.4.6'
+_LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?])
+_LT_DECL(, macro_revision, 0)
+])
+
+# lt~obsolete.m4 -- aclocal satisfying obsolete definitions. -*-Autoconf-*-
+#
+# Copyright (C) 2004-2005, 2007, 2009, 2011-2015 Free Software
+# Foundation, Inc.
+# Written by Scott James Remnant, 2004.
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+
+# serial 5 lt~obsolete.m4
+
+# These exist entirely to fool aclocal when bootstrapping libtool.
+#
+# In the past libtool.m4 has provided macros via AC_DEFUN (or AU_DEFUN),
+# which have later been changed to m4_define as they aren't part of the
+# exported API, or moved to Autoconf or Automake where they belong.
+#
+# The trouble is, aclocal is a bit thick. It'll see the old AC_DEFUN
+# in /usr/share/aclocal/libtool.m4 and remember it, then when it sees us
+# using a macro with the same name in our local m4/libtool.m4 it'll
+# pull the old libtool.m4 in (it doesn't see our shiny new m4_define
+# and doesn't know about Autoconf macros at all.)
+#
+# So we provide this file, which has a silly filename so it's always
+# included after everything else. This provides aclocal with the
+# AC_DEFUNs it wants, but when m4 processes it, it doesn't do anything
+# because those macros already exist, or will be overwritten later.
+# We use AC_DEFUN over AU_DEFUN for compatibility with aclocal-1.6.
+#
+# Anytime we withdraw an AC_DEFUN or AU_DEFUN, remember to add it here.
+# Yes, that means every name once taken will need to remain here until
+# we give up compatibility with versions before 1.7, at which point
+# we need to keep only those names which we still refer to.
+
+# This is to help aclocal find these macros, as it can't see m4_define.
+AC_DEFUN([LTOBSOLETE_VERSION], [m4_if([1])])
+
+m4_ifndef([AC_LIBTOOL_LINKER_OPTION], [AC_DEFUN([AC_LIBTOOL_LINKER_OPTION])])
+m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP])])
+m4_ifndef([_LT_AC_PROG_ECHO_BACKSLASH], [AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH])])
+m4_ifndef([_LT_AC_SHELL_INIT], [AC_DEFUN([_LT_AC_SHELL_INIT])])
+m4_ifndef([_LT_AC_SYS_LIBPATH_AIX], [AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX])])
+m4_ifndef([_LT_PROG_LTMAIN], [AC_DEFUN([_LT_PROG_LTMAIN])])
+m4_ifndef([_LT_AC_TAGVAR], [AC_DEFUN([_LT_AC_TAGVAR])])
+m4_ifndef([AC_LTDL_ENABLE_INSTALL], [AC_DEFUN([AC_LTDL_ENABLE_INSTALL])])
+m4_ifndef([AC_LTDL_PREOPEN], [AC_DEFUN([AC_LTDL_PREOPEN])])
+m4_ifndef([_LT_AC_SYS_COMPILER], [AC_DEFUN([_LT_AC_SYS_COMPILER])])
+m4_ifndef([_LT_AC_LOCK], [AC_DEFUN([_LT_AC_LOCK])])
+m4_ifndef([AC_LIBTOOL_SYS_OLD_ARCHIVE], [AC_DEFUN([AC_LIBTOOL_SYS_OLD_ARCHIVE])])
+m4_ifndef([_LT_AC_TRY_DLOPEN_SELF], [AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF])])
+m4_ifndef([AC_LIBTOOL_PROG_CC_C_O], [AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O])])
+m4_ifndef([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], [AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS])])
+m4_ifndef([AC_LIBTOOL_OBJDIR], [AC_DEFUN([AC_LIBTOOL_OBJDIR])])
+m4_ifndef([AC_LTDL_OBJDIR], [AC_DEFUN([AC_LTDL_OBJDIR])])
+m4_ifndef([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], [AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH])])
+m4_ifndef([AC_LIBTOOL_SYS_LIB_STRIP], [AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP])])
+m4_ifndef([AC_PATH_MAGIC], [AC_DEFUN([AC_PATH_MAGIC])])
+m4_ifndef([AC_PROG_LD_GNU], [AC_DEFUN([AC_PROG_LD_GNU])])
+m4_ifndef([AC_PROG_LD_RELOAD_FLAG], [AC_DEFUN([AC_PROG_LD_RELOAD_FLAG])])
+m4_ifndef([AC_DEPLIBS_CHECK_METHOD], [AC_DEFUN([AC_DEPLIBS_CHECK_METHOD])])
+m4_ifndef([AC_LIBTOOL_PROG_COMPILER_NO_RTTI], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI])])
+m4_ifndef([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], [AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE])])
+m4_ifndef([AC_LIBTOOL_PROG_COMPILER_PIC], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC])])
+m4_ifndef([AC_LIBTOOL_PROG_LD_SHLIBS], [AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS])])
+m4_ifndef([AC_LIBTOOL_POSTDEP_PREDEP], [AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP])])
+m4_ifndef([LT_AC_PROG_EGREP], [AC_DEFUN([LT_AC_PROG_EGREP])])
+m4_ifndef([LT_AC_PROG_SED], [AC_DEFUN([LT_AC_PROG_SED])])
+m4_ifndef([_LT_CC_BASENAME], [AC_DEFUN([_LT_CC_BASENAME])])
+m4_ifndef([_LT_COMPILER_BOILERPLATE], [AC_DEFUN([_LT_COMPILER_BOILERPLATE])])
+m4_ifndef([_LT_LINKER_BOILERPLATE], [AC_DEFUN([_LT_LINKER_BOILERPLATE])])
+m4_ifndef([_AC_PROG_LIBTOOL], [AC_DEFUN([_AC_PROG_LIBTOOL])])
+m4_ifndef([AC_LIBTOOL_SETUP], [AC_DEFUN([AC_LIBTOOL_SETUP])])
+m4_ifndef([_LT_AC_CHECK_DLFCN], [AC_DEFUN([_LT_AC_CHECK_DLFCN])])
+m4_ifndef([AC_LIBTOOL_SYS_DYNAMIC_LINKER], [AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER])])
+m4_ifndef([_LT_AC_TAGCONFIG], [AC_DEFUN([_LT_AC_TAGCONFIG])])
+m4_ifndef([AC_DISABLE_FAST_INSTALL], [AC_DEFUN([AC_DISABLE_FAST_INSTALL])])
+m4_ifndef([_LT_AC_LANG_CXX], [AC_DEFUN([_LT_AC_LANG_CXX])])
+m4_ifndef([_LT_AC_LANG_F77], [AC_DEFUN([_LT_AC_LANG_F77])])
+m4_ifndef([_LT_AC_LANG_GCJ], [AC_DEFUN([_LT_AC_LANG_GCJ])])
+m4_ifndef([AC_LIBTOOL_LANG_C_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG])])
+m4_ifndef([_LT_AC_LANG_C_CONFIG], [AC_DEFUN([_LT_AC_LANG_C_CONFIG])])
+m4_ifndef([AC_LIBTOOL_LANG_CXX_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG])])
+m4_ifndef([_LT_AC_LANG_CXX_CONFIG], [AC_DEFUN([_LT_AC_LANG_CXX_CONFIG])])
+m4_ifndef([AC_LIBTOOL_LANG_F77_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG])])
+m4_ifndef([_LT_AC_LANG_F77_CONFIG], [AC_DEFUN([_LT_AC_LANG_F77_CONFIG])])
+m4_ifndef([AC_LIBTOOL_LANG_GCJ_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG])])
+m4_ifndef([_LT_AC_LANG_GCJ_CONFIG], [AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG])])
+m4_ifndef([AC_LIBTOOL_LANG_RC_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG])])
+m4_ifndef([_LT_AC_LANG_RC_CONFIG], [AC_DEFUN([_LT_AC_LANG_RC_CONFIG])])
+m4_ifndef([AC_LIBTOOL_CONFIG], [AC_DEFUN([AC_LIBTOOL_CONFIG])])
+m4_ifndef([_LT_AC_FILE_LTDLL_C], [AC_DEFUN([_LT_AC_FILE_LTDLL_C])])
+m4_ifndef([_LT_REQUIRED_DARWIN_CHECKS], [AC_DEFUN([_LT_REQUIRED_DARWIN_CHECKS])])
+m4_ifndef([_LT_AC_PROG_CXXCPP], [AC_DEFUN([_LT_AC_PROG_CXXCPP])])
+m4_ifndef([_LT_PREPARE_SED_QUOTE_VARS], [AC_DEFUN([_LT_PREPARE_SED_QUOTE_VARS])])
+m4_ifndef([_LT_PROG_ECHO_BACKSLASH], [AC_DEFUN([_LT_PROG_ECHO_BACKSLASH])])
+m4_ifndef([_LT_PROG_F77], [AC_DEFUN([_LT_PROG_F77])])
+m4_ifndef([_LT_PROG_FC], [AC_DEFUN([_LT_PROG_FC])])
+m4_ifndef([_LT_PROG_CXX], [AC_DEFUN([_LT_PROG_CXX])])
+
+# Copyright (C) 2002-2014 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_AUTOMAKE_VERSION(VERSION)
+# ----------------------------
+# Automake X.Y traces this macro to ensure aclocal.m4 has been
+# generated from the m4 files accompanying Automake X.Y.
+# (This private macro should not be called outside this file.)
+AC_DEFUN([AM_AUTOMAKE_VERSION],
+[am__api_version='1.15'
+dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
+dnl require some minimum version. Point them to the right macro.
+m4_if([$1], [1.15], [],
+ [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
+])
+
+# _AM_AUTOCONF_VERSION(VERSION)
+# -----------------------------
+# aclocal traces this macro to find the Autoconf version.
+# This is a private macro too. Using m4_define simplifies
+# the logic in aclocal, which can simply ignore this definition.
+m4_define([_AM_AUTOCONF_VERSION], [])
+
+# AM_SET_CURRENT_AUTOMAKE_VERSION
+# -------------------------------
+# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
+# This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
+AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
+[AM_AUTOMAKE_VERSION([1.15])dnl
+m4_ifndef([AC_AUTOCONF_VERSION],
+ [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
+_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
+
+# AM_AUX_DIR_EXPAND -*- Autoconf -*-
+
+# Copyright (C) 2001-2014 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
+# $ac_aux_dir to '$srcdir/foo'. In other projects, it is set to
+# '$srcdir', '$srcdir/..', or '$srcdir/../..'.
+#
+# Of course, Automake must honor this variable whenever it calls a
+# tool from the auxiliary directory. The problem is that $srcdir (and
+# therefore $ac_aux_dir as well) can be either absolute or relative,
+# depending on how configure is run. This is pretty annoying, since
+# it makes $ac_aux_dir quite unusable in subdirectories: in the top
+# source directory, any form will work fine, but in subdirectories a
+# relative path needs to be adjusted first.
+#
+# $ac_aux_dir/missing
+# fails when called from a subdirectory if $ac_aux_dir is relative
+# $top_srcdir/$ac_aux_dir/missing
+# fails if $ac_aux_dir is absolute,
+# fails when called from a subdirectory in a VPATH build with
+# a relative $ac_aux_dir
+#
+# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
+# are both prefixed by $srcdir. In an in-source build this is usually
+# harmless because $srcdir is '.', but things will broke when you
+# start a VPATH build or use an absolute $srcdir.
+#
+# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
+# iff we strip the leading $srcdir from $ac_aux_dir. That would be:
+# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
+# and then we would define $MISSING as
+# MISSING="\${SHELL} $am_aux_dir/missing"
+# This will work as long as MISSING is not called from configure, because
+# unfortunately $(top_srcdir) has no meaning in configure.
+# However there are other variables, like CC, which are often used in
+# configure, and could therefore not use this "fixed" $ac_aux_dir.
+#
+# Another solution, used here, is to always expand $ac_aux_dir to an
+# absolute PATH. The drawback is that using absolute paths prevent a
+# configured tree to be moved without reconfiguration.
+
+AC_DEFUN([AM_AUX_DIR_EXPAND],
+[AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl
+# Expand $ac_aux_dir to an absolute path.
+am_aux_dir=`cd "$ac_aux_dir" && pwd`
+])
+
+# AM_CONDITIONAL -*- Autoconf -*-
+
+# Copyright (C) 1997-2014 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_CONDITIONAL(NAME, SHELL-CONDITION)
+# -------------------------------------
+# Define a conditional.
+AC_DEFUN([AM_CONDITIONAL],
+[AC_PREREQ([2.52])dnl
+ m4_if([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])],
+ [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
+AC_SUBST([$1_TRUE])dnl
+AC_SUBST([$1_FALSE])dnl
+_AM_SUBST_NOTMAKE([$1_TRUE])dnl
+_AM_SUBST_NOTMAKE([$1_FALSE])dnl
+m4_define([_AM_COND_VALUE_$1], [$2])dnl
+if $2; then
+ $1_TRUE=
+ $1_FALSE='#'
+else
+ $1_TRUE='#'
+ $1_FALSE=
+fi
+AC_CONFIG_COMMANDS_PRE(
+[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
+ AC_MSG_ERROR([[conditional "$1" was never defined.
+Usually this means the macro was only invoked conditionally.]])
+fi])])
+
+# Copyright (C) 1999-2014 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+
+# There are a few dirty hacks below to avoid letting 'AC_PROG_CC' be
+# written in clear, in which case automake, when reading aclocal.m4,
+# will think it sees a *use*, and therefore will trigger all it's
+# C support machinery. Also note that it means that autoscan, seeing
+# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
+
+
+# _AM_DEPENDENCIES(NAME)
+# ----------------------
+# See how the compiler implements dependency checking.
+# NAME is "CC", "CXX", "OBJC", "OBJCXX", "UPC", or "GJC".
+# We try a few techniques and use that to set a single cache variable.
+#
+# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
+# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
+# dependency, and given that the user is not expected to run this macro,
+# just rely on AC_PROG_CC.
+AC_DEFUN([_AM_DEPENDENCIES],
+[AC_REQUIRE([AM_SET_DEPDIR])dnl
+AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
+AC_REQUIRE([AM_MAKE_INCLUDE])dnl
+AC_REQUIRE([AM_DEP_TRACK])dnl
+
+m4_if([$1], [CC], [depcc="$CC" am_compiler_list=],
+ [$1], [CXX], [depcc="$CXX" am_compiler_list=],
+ [$1], [OBJC], [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
+ [$1], [OBJCXX], [depcc="$OBJCXX" am_compiler_list='gcc3 gcc'],
+ [$1], [UPC], [depcc="$UPC" am_compiler_list=],
+ [$1], [GCJ], [depcc="$GCJ" am_compiler_list='gcc3 gcc'],
+ [depcc="$$1" am_compiler_list=])
+
+AC_CACHE_CHECK([dependency style of $depcc],
+ [am_cv_$1_dependencies_compiler_type],
+[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+ # We make a subdir and do the tests there. Otherwise we can end up
+ # making bogus files that we don't know about and never remove. For
+ # instance it was reported that on HP-UX the gcc test will end up
+ # making a dummy file named 'D' -- because '-MD' means "put the output
+ # in D".
+ rm -rf conftest.dir
+ mkdir conftest.dir
+ # Copy depcomp to subdir because otherwise we won't find it if we're
+ # using a relative directory.
+ cp "$am_depcomp" conftest.dir
+ cd conftest.dir
+ # We will build objects and dependencies in a subdirectory because
+ # it helps to detect inapplicable dependency modes. For instance
+ # both Tru64's cc and ICC support -MD to output dependencies as a
+ # side effect of compilation, but ICC will put the dependencies in
+ # the current directory while Tru64 will put them in the object
+ # directory.
+ mkdir sub
+
+ am_cv_$1_dependencies_compiler_type=none
+ if test "$am_compiler_list" = ""; then
+ am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
+ fi
+ am__universal=false
+ m4_case([$1], [CC],
+ [case " $depcc " in #(
+ *\ -arch\ *\ -arch\ *) am__universal=true ;;
+ esac],
+ [CXX],
+ [case " $depcc " in #(
+ *\ -arch\ *\ -arch\ *) am__universal=true ;;
+ esac])
+
+ for depmode in $am_compiler_list; do
+ # Setup a source with many dependencies, because some compilers
+ # like to wrap large dependency lists on column 80 (with \), and
+ # we should not choose a depcomp mode which is confused by this.
+ #
+ # We need to recreate these files for each test, as the compiler may
+ # overwrite some of them when testing with obscure command lines.
+ # This happens at least with the AIX C compiler.
+ : > sub/conftest.c
+ for i in 1 2 3 4 5 6; do
+ echo '#include "conftst'$i'.h"' >> sub/conftest.c
+ # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with
+ # Solaris 10 /bin/sh.
+ echo '/* dummy */' > sub/conftst$i.h
+ done
+ echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+ # We check with '-c' and '-o' for the sake of the "dashmstdout"
+ # mode. It turns out that the SunPro C++ compiler does not properly
+ # handle '-M -o', and we need to detect this. Also, some Intel
+ # versions had trouble with output in subdirs.
+ am__obj=sub/conftest.${OBJEXT-o}
+ am__minus_obj="-o $am__obj"
+ case $depmode in
+ gcc)
+ # This depmode causes a compiler race in universal mode.
+ test "$am__universal" = false || continue
+ ;;
+ nosideeffect)
+ # After this tag, mechanisms are not by side-effect, so they'll
+ # only be used when explicitly requested.
+ if test "x$enable_dependency_tracking" = xyes; then
+ continue
+ else
+ break
+ fi
+ ;;
+ msvc7 | msvc7msys | msvisualcpp | msvcmsys)
+ # This compiler won't grok '-c -o', but also, the minuso test has
+ # not run yet. These depmodes are late enough in the game, and
+ # so weak that their functioning should not be impacted.
+ am__obj=conftest.${OBJEXT-o}
+ am__minus_obj=
+ ;;
+ none) break ;;
+ esac
+ if depmode=$depmode \
+ source=sub/conftest.c object=$am__obj \
+ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+ $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
+ >/dev/null 2>conftest.err &&
+ grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
+ grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+ grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
+ ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+ # icc doesn't choke on unknown options, it will just issue warnings
+ # or remarks (even with -Werror). So we grep stderr for any message
+ # that says an option was ignored or not supported.
+ # When given -MP, icc 7.0 and 7.1 complain thusly:
+ # icc: Command line warning: ignoring option '-M'; no argument required
+ # The diagnosis changed in icc 8.0:
+ # icc: Command line remark: option '-MP' not supported
+ if (grep 'ignoring option' conftest.err ||
+ grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+ am_cv_$1_dependencies_compiler_type=$depmode
+ break
+ fi
+ fi
+ done
+
+ cd ..
+ rm -rf conftest.dir
+else
+ am_cv_$1_dependencies_compiler_type=none
+fi
+])
+AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
+AM_CONDITIONAL([am__fastdep$1], [
+ test "x$enable_dependency_tracking" != xno \
+ && test "$am_cv_$1_dependencies_compiler_type" = gcc3])
+])
+
+
+# AM_SET_DEPDIR
+# -------------
+# Choose a directory name for dependency files.
+# This macro is AC_REQUIREd in _AM_DEPENDENCIES.
+AC_DEFUN([AM_SET_DEPDIR],
+[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
+])
+
+
+# AM_DEP_TRACK
+# ------------
+AC_DEFUN([AM_DEP_TRACK],
+[AC_ARG_ENABLE([dependency-tracking], [dnl
+AS_HELP_STRING(
+ [--enable-dependency-tracking],
+ [do not reject slow dependency extractors])
+AS_HELP_STRING(
+ [--disable-dependency-tracking],
+ [speeds up one-time build])])
+if test "x$enable_dependency_tracking" != xno; then
+ am_depcomp="$ac_aux_dir/depcomp"
+ AMDEPBACKSLASH='\'
+ am__nodep='_no'
+fi
+AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
+AC_SUBST([AMDEPBACKSLASH])dnl
+_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl
+AC_SUBST([am__nodep])dnl
+_AM_SUBST_NOTMAKE([am__nodep])dnl
+])
+
+# Generate code to set up dependency tracking. -*- Autoconf -*-
+
+# Copyright (C) 1999-2014 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+
+# _AM_OUTPUT_DEPENDENCY_COMMANDS
+# ------------------------------
+AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
+[{
+ # Older Autoconf quotes --file arguments for eval, but not when files
+ # are listed without --file. Let's play safe and only enable the eval
+ # if we detect the quoting.
+ case $CONFIG_FILES in
+ *\'*) eval set x "$CONFIG_FILES" ;;
+ *) set x $CONFIG_FILES ;;
+ esac
+ shift
+ for mf
+ do
+ # Strip MF so we end up with the name of the file.
+ mf=`echo "$mf" | sed -e 's/:.*$//'`
+ # Check whether this is an Automake generated Makefile or not.
+ # We used to match only the files named 'Makefile.in', but
+ # some people rename them; so instead we look at the file content.
+ # Grep'ing the first line is not enough: some people post-process
+ # each Makefile.in and add a new line on top of each file to say so.
+ # Grep'ing the whole file is not good either: AIX grep has a line
+ # limit of 2048, but all sed's we know have understand at least 4000.
+ if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
+ dirpart=`AS_DIRNAME("$mf")`
+ else
+ continue
+ fi
+ # Extract the definition of DEPDIR, am__include, and am__quote
+ # from the Makefile without running 'make'.
+ DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
+ test -z "$DEPDIR" && continue
+ am__include=`sed -n 's/^am__include = //p' < "$mf"`
+ test -z "$am__include" && continue
+ am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
+ # Find all dependency output files, they are included files with
+ # $(DEPDIR) in their names. We invoke sed twice because it is the
+ # simplest approach to changing $(DEPDIR) to its actual value in the
+ # expansion.
+ for file in `sed -n "
+ s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
+ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do
+ # Make sure the directory exists.
+ test -f "$dirpart/$file" && continue
+ fdir=`AS_DIRNAME(["$file"])`
+ AS_MKDIR_P([$dirpart/$fdir])
+ # echo "creating $dirpart/$file"
+ echo '# dummy' > "$dirpart/$file"
+ done
+ done
+}
+])# _AM_OUTPUT_DEPENDENCY_COMMANDS
+
+
+# AM_OUTPUT_DEPENDENCY_COMMANDS
+# -----------------------------
+# This macro should only be invoked once -- use via AC_REQUIRE.
+#
+# This code is only required when automatic dependency tracking
+# is enabled. FIXME. This creates each '.P' file that we will
+# need in order to bootstrap the dependency handling code.
+AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
+[AC_CONFIG_COMMANDS([depfiles],
+ [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
+ [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
+])
+
+# Do all the work for Automake. -*- Autoconf -*-
+
+# Copyright (C) 1996-2014 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This macro actually does too much. Some checks are only needed if
+# your package does certain things. But this isn't really a big deal.
+
+dnl Redefine AC_PROG_CC to automatically invoke _AM_PROG_CC_C_O.
+m4_define([AC_PROG_CC],
+m4_defn([AC_PROG_CC])
+[_AM_PROG_CC_C_O
+])
+
+# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
+# AM_INIT_AUTOMAKE([OPTIONS])
+# -----------------------------------------------
+# The call with PACKAGE and VERSION arguments is the old style
+# call (pre autoconf-2.50), which is being phased out. PACKAGE
+# and VERSION should now be passed to AC_INIT and removed from
+# the call to AM_INIT_AUTOMAKE.
+# We support both call styles for the transition. After
+# the next Automake release, Autoconf can make the AC_INIT
+# arguments mandatory, and then we can depend on a new Autoconf
+# release and drop the old call support.
+AC_DEFUN([AM_INIT_AUTOMAKE],
+[AC_PREREQ([2.65])dnl
+dnl Autoconf wants to disallow AM_ names. We explicitly allow
+dnl the ones we care about.
+m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
+AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
+AC_REQUIRE([AC_PROG_INSTALL])dnl
+if test "`cd $srcdir && pwd`" != "`pwd`"; then
+ # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
+ # is not polluted with repeated "-I."
+ AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl
+ # test to see if srcdir already configured
+ if test -f $srcdir/config.status; then
+ AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
+ fi
+fi
+
+# test whether we have cygpath
+if test -z "$CYGPATH_W"; then
+ if (cygpath --version) >/dev/null 2>/dev/null; then
+ CYGPATH_W='cygpath -w'
+ else
+ CYGPATH_W=echo
+ fi
+fi
+AC_SUBST([CYGPATH_W])
+
+# Define the identity of the package.
+dnl Distinguish between old-style and new-style calls.
+m4_ifval([$2],
+[AC_DIAGNOSE([obsolete],
+ [$0: two- and three-arguments forms are deprecated.])
+m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
+ AC_SUBST([PACKAGE], [$1])dnl
+ AC_SUBST([VERSION], [$2])],
+[_AM_SET_OPTIONS([$1])dnl
+dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT.
+m4_if(
+ m4_ifdef([AC_PACKAGE_NAME], [ok]):m4_ifdef([AC_PACKAGE_VERSION], [ok]),
+ [ok:ok],,
+ [m4_fatal([AC_INIT should be called with package and version arguments])])dnl
+ AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
+ AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
+
+_AM_IF_OPTION([no-define],,
+[AC_DEFINE_UNQUOTED([PACKAGE], ["$PACKAGE"], [Name of package])
+ AC_DEFINE_UNQUOTED([VERSION], ["$VERSION"], [Version number of package])])dnl
+
+# Some tools Automake needs.
+AC_REQUIRE([AM_SANITY_CHECK])dnl
+AC_REQUIRE([AC_ARG_PROGRAM])dnl
+AM_MISSING_PROG([ACLOCAL], [aclocal-${am__api_version}])
+AM_MISSING_PROG([AUTOCONF], [autoconf])
+AM_MISSING_PROG([AUTOMAKE], [automake-${am__api_version}])
+AM_MISSING_PROG([AUTOHEADER], [autoheader])
+AM_MISSING_PROG([MAKEINFO], [makeinfo])
+AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
+AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl
+AC_REQUIRE([AC_PROG_MKDIR_P])dnl
+# For better backward compatibility. To be removed once Automake 1.9.x
+# dies out for good. For more background, see:
+# <http://lists.gnu.org/archive/html/automake/2012-07/msg00001.html>
+# <http://lists.gnu.org/archive/html/automake/2012-07/msg00014.html>
+AC_SUBST([mkdir_p], ['$(MKDIR_P)'])
+# We need awk for the "check" target (and possibly the TAP driver). The
+# system "awk" is bad on some platforms.
+AC_REQUIRE([AC_PROG_AWK])dnl
+AC_REQUIRE([AC_PROG_MAKE_SET])dnl
+AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
+ [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
+ [_AM_PROG_TAR([v7])])])
+_AM_IF_OPTION([no-dependencies],,
+[AC_PROVIDE_IFELSE([AC_PROG_CC],
+ [_AM_DEPENDENCIES([CC])],
+ [m4_define([AC_PROG_CC],
+ m4_defn([AC_PROG_CC])[_AM_DEPENDENCIES([CC])])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_CXX],
+ [_AM_DEPENDENCIES([CXX])],
+ [m4_define([AC_PROG_CXX],
+ m4_defn([AC_PROG_CXX])[_AM_DEPENDENCIES([CXX])])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_OBJC],
+ [_AM_DEPENDENCIES([OBJC])],
+ [m4_define([AC_PROG_OBJC],
+ m4_defn([AC_PROG_OBJC])[_AM_DEPENDENCIES([OBJC])])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_OBJCXX],
+ [_AM_DEPENDENCIES([OBJCXX])],
+ [m4_define([AC_PROG_OBJCXX],
+ m4_defn([AC_PROG_OBJCXX])[_AM_DEPENDENCIES([OBJCXX])])])dnl
+])
+AC_REQUIRE([AM_SILENT_RULES])dnl
+dnl The testsuite driver may need to know about EXEEXT, so add the
+dnl 'am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This
+dnl macro is hooked onto _AC_COMPILER_EXEEXT early, see below.
+AC_CONFIG_COMMANDS_PRE(dnl
+[m4_provide_if([_AM_COMPILER_EXEEXT],
+ [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl
+
+# POSIX will say in a future version that running "rm -f" with no argument
+# is OK; and we want to be able to make that assumption in our Makefile
+# recipes. So use an aggressive probe to check that the usage we want is
+# actually supported "in the wild" to an acceptable degree.
+# See automake bug#10828.
+# To make any issue more visible, cause the running configure to be aborted
+# by default if the 'rm' program in use doesn't match our expectations; the
+# user can still override this though.
+if rm -f && rm -fr && rm -rf; then : OK; else
+ cat >&2 <<'END'
+Oops!
+
+Your 'rm' program seems unable to run without file operands specified
+on the command line, even when the '-f' option is present. This is contrary
+to the behaviour of most rm programs out there, and not conforming with
+the upcoming POSIX standard: <http://austingroupbugs.net/view.php?id=542>
+
+Please tell bug-automake@gnu.org about your system, including the value
+of your $PATH and any error possibly output before this message. This
+can help us improve future automake versions.
+
+END
+ if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then
+ echo 'Configuration will proceed anyway, since you have set the' >&2
+ echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2
+ echo >&2
+ else
+ cat >&2 <<'END'
+Aborting the configuration process, to ensure you take notice of the issue.
+
+You can download and install GNU coreutils to get an 'rm' implementation
+that behaves properly: <http://www.gnu.org/software/coreutils/>.
+
+If you want to complete the configuration process using your problematic
+'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM
+to "yes", and re-run configure.
+
+END
+ AC_MSG_ERROR([Your 'rm' program is bad, sorry.])
+ fi
+fi
+dnl The trailing newline in this macro's definition is deliberate, for
+dnl backward compatibility and to allow trailing 'dnl'-style comments
+dnl after the AM_INIT_AUTOMAKE invocation. See automake bug#16841.
+])
+
+dnl Hook into '_AC_COMPILER_EXEEXT' early to learn its expansion. Do not
+dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further
+dnl mangled by Autoconf and run in a shell conditional statement.
+m4_define([_AC_COMPILER_EXEEXT],
+m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])])
+
+# When config.status generates a header, we must update the stamp-h file.
+# This file resides in the same directory as the config header
+# that is generated. The stamp files are numbered to have different names.
+
+# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
+# loop where config.status creates the headers, so we can generate
+# our stamp files there.
+AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
+[# Compute $1's index in $config_headers.
+_am_arg=$1
+_am_stamp_count=1
+for _am_header in $config_headers :; do
+ case $_am_header in
+ $_am_arg | $_am_arg:* )
+ break ;;
+ * )
+ _am_stamp_count=`expr $_am_stamp_count + 1` ;;
+ esac
+done
+echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
+
+# Copyright (C) 2001-2014 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_INSTALL_SH
+# ------------------
+# Define $install_sh.
+AC_DEFUN([AM_PROG_INSTALL_SH],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+if test x"${install_sh+set}" != xset; then
+ case $am_aux_dir in
+ *\ * | *\ *)
+ install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
+ *)
+ install_sh="\${SHELL} $am_aux_dir/install-sh"
+ esac
+fi
+AC_SUBST([install_sh])])
+
+# Copyright (C) 2003-2014 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# Check whether the underlying file-system supports filenames
+# with a leading dot. For instance MS-DOS doesn't.
+AC_DEFUN([AM_SET_LEADING_DOT],
+[rm -rf .tst 2>/dev/null
+mkdir .tst 2>/dev/null
+if test -d .tst; then
+ am__leading_dot=.
+else
+ am__leading_dot=_
+fi
+rmdir .tst 2>/dev/null
+AC_SUBST([am__leading_dot])])
+
+# Check to see how 'make' treats includes. -*- Autoconf -*-
+
+# Copyright (C) 2001-2014 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_MAKE_INCLUDE()
+# -----------------
+# Check to see how make treats includes.
+AC_DEFUN([AM_MAKE_INCLUDE],
+[am_make=${MAKE-make}
+cat > confinc << 'END'
+am__doit:
+ @echo this is the am__doit target
+.PHONY: am__doit
+END
+# If we don't find an include directive, just comment out the code.
+AC_MSG_CHECKING([for style of include used by $am_make])
+am__include="#"
+am__quote=
+_am_result=none
+# First try GNU make style include.
+echo "include confinc" > confmf
+# Ignore all kinds of additional output from 'make'.
+case `$am_make -s -f confmf 2> /dev/null` in #(
+*the\ am__doit\ target*)
+ am__include=include
+ am__quote=
+ _am_result=GNU
+ ;;
+esac
+# Now try BSD make style include.
+if test "$am__include" = "#"; then
+ echo '.include "confinc"' > confmf
+ case `$am_make -s -f confmf 2> /dev/null` in #(
+ *the\ am__doit\ target*)
+ am__include=.include
+ am__quote="\""
+ _am_result=BSD
+ ;;
+ esac
+fi
+AC_SUBST([am__include])
+AC_SUBST([am__quote])
+AC_MSG_RESULT([$_am_result])
+rm -f confinc confmf
+])
+
+# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*-
+
+# Copyright (C) 1997-2014 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_MISSING_PROG(NAME, PROGRAM)
+# ------------------------------
+AC_DEFUN([AM_MISSING_PROG],
+[AC_REQUIRE([AM_MISSING_HAS_RUN])
+$1=${$1-"${am_missing_run}$2"}
+AC_SUBST($1)])
+
+# AM_MISSING_HAS_RUN
+# ------------------
+# Define MISSING if not defined so far and test if it is modern enough.
+# If it is, set am_missing_run to use it, otherwise, to nothing.
+AC_DEFUN([AM_MISSING_HAS_RUN],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+AC_REQUIRE_AUX_FILE([missing])dnl
+if test x"${MISSING+set}" != xset; then
+ case $am_aux_dir in
+ *\ * | *\ *)
+ MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
+ *)
+ MISSING="\${SHELL} $am_aux_dir/missing" ;;
+ esac
+fi
+# Use eval to expand $SHELL
+if eval "$MISSING --is-lightweight"; then
+ am_missing_run="$MISSING "
+else
+ am_missing_run=
+ AC_MSG_WARN(['missing' script is too old or missing])
+fi
+])
+
+# -*- Autoconf -*-
+# Obsolete and "removed" macros, that must however still report explicit
+# error messages when used, to smooth transition.
+#
+# Copyright (C) 1996-2014 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+AC_DEFUN([AM_CONFIG_HEADER],
+[AC_DIAGNOSE([obsolete],
+['$0': this macro is obsolete.
+You should use the 'AC][_CONFIG_HEADERS' macro instead.])dnl
+AC_CONFIG_HEADERS($@)])
+
+AC_DEFUN([AM_PROG_CC_STDC],
+[AC_PROG_CC
+am_cv_prog_cc_stdc=$ac_cv_prog_cc_stdc
+AC_DIAGNOSE([obsolete],
+['$0': this macro is obsolete.
+You should simply use the 'AC][_PROG_CC' macro instead.
+Also, your code should no longer depend upon 'am_cv_prog_cc_stdc',
+but upon 'ac_cv_prog_cc_stdc'.])])
+
+AC_DEFUN([AM_C_PROTOTYPES],
+ [AC_FATAL([automatic de-ANSI-fication support has been removed])])
+AU_DEFUN([fp_C_PROTOTYPES], [AM_C_PROTOTYPES])
+
+# Helper functions for option handling. -*- Autoconf -*-
+
+# Copyright (C) 2001-2014 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# _AM_MANGLE_OPTION(NAME)
+# -----------------------
+AC_DEFUN([_AM_MANGLE_OPTION],
+[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
+
+# _AM_SET_OPTION(NAME)
+# --------------------
+# Set option NAME. Presently that only means defining a flag for this option.
+AC_DEFUN([_AM_SET_OPTION],
+[m4_define(_AM_MANGLE_OPTION([$1]), [1])])
+
+# _AM_SET_OPTIONS(OPTIONS)
+# ------------------------
+# OPTIONS is a space-separated list of Automake options.
+AC_DEFUN([_AM_SET_OPTIONS],
+[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
+
+# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
+# -------------------------------------------
+# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
+AC_DEFUN([_AM_IF_OPTION],
+[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
+
+# Copyright (C) 1999-2014 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# _AM_PROG_CC_C_O
+# ---------------
+# Like AC_PROG_CC_C_O, but changed for automake. We rewrite AC_PROG_CC
+# to automatically call this.
+AC_DEFUN([_AM_PROG_CC_C_O],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+AC_REQUIRE_AUX_FILE([compile])dnl
+AC_LANG_PUSH([C])dnl
+AC_CACHE_CHECK(
+ [whether $CC understands -c and -o together],
+ [am_cv_prog_cc_c_o],
+ [AC_LANG_CONFTEST([AC_LANG_PROGRAM([])])
+ # Make sure it works both with $CC and with simple cc.
+ # Following AC_PROG_CC_C_O, we do the test twice because some
+ # compilers refuse to overwrite an existing .o file with -o,
+ # though they will create one.
+ am_cv_prog_cc_c_o=yes
+ for am_i in 1 2; do
+ if AM_RUN_LOG([$CC -c conftest.$ac_ext -o conftest2.$ac_objext]) \
+ && test -f conftest2.$ac_objext; then
+ : OK
+ else
+ am_cv_prog_cc_c_o=no
+ break
+ fi
+ done
+ rm -f core conftest*
+ unset am_i])
+if test "$am_cv_prog_cc_c_o" != yes; then
+ # Losing compiler, so override with the script.
+ # FIXME: It is wrong to rewrite CC.
+ # But if we don't then we get into trouble of one sort or another.
+ # A longer-term fix would be to have automake use am__CC in this case,
+ # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)"
+ CC="$am_aux_dir/compile $CC"
+fi
+AC_LANG_POP([C])])
+
+# For backward compatibility.
+AC_DEFUN_ONCE([AM_PROG_CC_C_O], [AC_REQUIRE([AC_PROG_CC])])
+
+# Copyright (C) 2001-2014 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_RUN_LOG(COMMAND)
+# -------------------
+# Run COMMAND, save the exit status in ac_status, and log it.
+# (This has been adapted from Autoconf's _AC_RUN_LOG macro.)
+AC_DEFUN([AM_RUN_LOG],
+[{ echo "$as_me:$LINENO: $1" >&AS_MESSAGE_LOG_FD
+ ($1) >&AS_MESSAGE_LOG_FD 2>&AS_MESSAGE_LOG_FD
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
+ (exit $ac_status); }])
+
+# Check to make sure that the build environment is sane. -*- Autoconf -*-
+
+# Copyright (C) 1996-2014 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_SANITY_CHECK
+# ---------------
+AC_DEFUN([AM_SANITY_CHECK],
+[AC_MSG_CHECKING([whether build environment is sane])
+# Reject unsafe characters in $srcdir or the absolute working directory
+# name. Accept space and tab only in the latter.
+am_lf='
+'
+case `pwd` in
+ *[[\\\"\#\$\&\'\`$am_lf]]*)
+ AC_MSG_ERROR([unsafe absolute working directory name]);;
+esac
+case $srcdir in
+ *[[\\\"\#\$\&\'\`$am_lf\ \ ]]*)
+ AC_MSG_ERROR([unsafe srcdir value: '$srcdir']);;
+esac
+
+# Do 'set' in a subshell so we don't clobber the current shell's
+# arguments. Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+ am_has_slept=no
+ for am_try in 1 2; do
+ echo "timestamp, slept: $am_has_slept" > conftest.file
+ set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
+ if test "$[*]" = "X"; then
+ # -L didn't work.
+ set X `ls -t "$srcdir/configure" conftest.file`
+ fi
+ if test "$[*]" != "X $srcdir/configure conftest.file" \
+ && test "$[*]" != "X conftest.file $srcdir/configure"; then
+
+ # If neither matched, then we have a broken ls. This can happen
+ # if, for instance, CONFIG_SHELL is bash and it inherits a
+ # broken ls alias from the environment. This has actually
+ # happened. Such a system could not be considered "sane".
+ AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken
+ alias in your environment])
+ fi
+ if test "$[2]" = conftest.file || test $am_try -eq 2; then
+ break
+ fi
+ # Just in case.
+ sleep 1
+ am_has_slept=yes
+ done
+ test "$[2]" = conftest.file
+ )
+then
+ # Ok.
+ :
+else
+ AC_MSG_ERROR([newly created file is older than distributed files!
+Check your system clock])
+fi
+AC_MSG_RESULT([yes])
+# If we didn't sleep, we still need to ensure time stamps of config.status and
+# generated files are strictly newer.
+am_sleep_pid=
+if grep 'slept: no' conftest.file >/dev/null 2>&1; then
+ ( sleep 1 ) &
+ am_sleep_pid=$!
+fi
+AC_CONFIG_COMMANDS_PRE(
+ [AC_MSG_CHECKING([that generated files are newer than configure])
+ if test -n "$am_sleep_pid"; then
+ # Hide warnings about reused PIDs.
+ wait $am_sleep_pid 2>/dev/null
+ fi
+ AC_MSG_RESULT([done])])
+rm -f conftest.file
+])
+
+# Copyright (C) 2009-2014 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_SILENT_RULES([DEFAULT])
+# --------------------------
+# Enable less verbose build rules; with the default set to DEFAULT
+# ("yes" being less verbose, "no" or empty being verbose).
+AC_DEFUN([AM_SILENT_RULES],
+[AC_ARG_ENABLE([silent-rules], [dnl
+AS_HELP_STRING(
+ [--enable-silent-rules],
+ [less verbose build output (undo: "make V=1")])
+AS_HELP_STRING(
+ [--disable-silent-rules],
+ [verbose build output (undo: "make V=0")])dnl
+])
+case $enable_silent_rules in @%:@ (((
+ yes) AM_DEFAULT_VERBOSITY=0;;
+ no) AM_DEFAULT_VERBOSITY=1;;
+ *) AM_DEFAULT_VERBOSITY=m4_if([$1], [yes], [0], [1]);;
+esac
+dnl
+dnl A few 'make' implementations (e.g., NonStop OS and NextStep)
+dnl do not support nested variable expansions.
+dnl See automake bug#9928 and bug#10237.
+am_make=${MAKE-make}
+AC_CACHE_CHECK([whether $am_make supports nested variables],
+ [am_cv_make_support_nested_variables],
+ [if AS_ECHO([['TRUE=$(BAR$(V))
+BAR0=false
+BAR1=true
+V=1
+am__doit:
+ @$(TRUE)
+.PHONY: am__doit']]) | $am_make -f - >/dev/null 2>&1; then
+ am_cv_make_support_nested_variables=yes
+else
+ am_cv_make_support_nested_variables=no
+fi])
+if test $am_cv_make_support_nested_variables = yes; then
+ dnl Using '$V' instead of '$(V)' breaks IRIX make.
+ AM_V='$(V)'
+ AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
+else
+ AM_V=$AM_DEFAULT_VERBOSITY
+ AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY
+fi
+AC_SUBST([AM_V])dnl
+AM_SUBST_NOTMAKE([AM_V])dnl
+AC_SUBST([AM_DEFAULT_V])dnl
+AM_SUBST_NOTMAKE([AM_DEFAULT_V])dnl
+AC_SUBST([AM_DEFAULT_VERBOSITY])dnl
+AM_BACKSLASH='\'
+AC_SUBST([AM_BACKSLASH])dnl
+_AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl
+])
+
+# Copyright (C) 2001-2014 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_INSTALL_STRIP
+# ---------------------
+# One issue with vendor 'install' (even GNU) is that you can't
+# specify the program used to strip binaries. This is especially
+# annoying in cross-compiling environments, where the build's strip
+# is unlikely to handle the host's binaries.
+# Fortunately install-sh will honor a STRIPPROG variable, so we
+# always use install-sh in "make install-strip", and initialize
+# STRIPPROG with the value of the STRIP variable (set by the user).
+AC_DEFUN([AM_PROG_INSTALL_STRIP],
+[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
+# Installed binaries are usually stripped using 'strip' when the user
+# run "make install-strip". However 'strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the 'STRIP' environment variable to overrule this program.
+dnl Don't test for $cross_compiling = yes, because it might be 'maybe'.
+if test "$cross_compiling" != no; then
+ AC_CHECK_TOOL([STRIP], [strip], :)
+fi
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
+AC_SUBST([INSTALL_STRIP_PROGRAM])])
+
+# Copyright (C) 2006-2014 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# _AM_SUBST_NOTMAKE(VARIABLE)
+# ---------------------------
+# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in.
+# This macro is traced by Automake.
+AC_DEFUN([_AM_SUBST_NOTMAKE])
+
+# AM_SUBST_NOTMAKE(VARIABLE)
+# --------------------------
+# Public sister of _AM_SUBST_NOTMAKE.
+AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
+
+# Check how to create a tarball. -*- Autoconf -*-
+
+# Copyright (C) 2004-2014 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# _AM_PROG_TAR(FORMAT)
+# --------------------
+# Check how to create a tarball in format FORMAT.
+# FORMAT should be one of 'v7', 'ustar', or 'pax'.
+#
+# Substitute a variable $(am__tar) that is a command
+# writing to stdout a FORMAT-tarball containing the directory
+# $tardir.
+# tardir=directory && $(am__tar) > result.tar
+#
+# Substitute a variable $(am__untar) that extract such
+# a tarball read from stdin.
+# $(am__untar) < result.tar
+#
+AC_DEFUN([_AM_PROG_TAR],
+[# Always define AMTAR for backward compatibility. Yes, it's still used
+# in the wild :-( We should find a proper way to deprecate it ...
+AC_SUBST([AMTAR], ['$${TAR-tar}'])
+
+# We'll loop over all known methods to create a tar archive until one works.
+_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
+
+m4_if([$1], [v7],
+ [am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'],
+
+ [m4_case([$1],
+ [ustar],
+ [# The POSIX 1988 'ustar' format is defined with fixed-size fields.
+ # There is notably a 21 bits limit for the UID and the GID. In fact,
+ # the 'pax' utility can hang on bigger UID/GID (see automake bug#8343
+ # and bug#13588).
+ am_max_uid=2097151 # 2^21 - 1
+ am_max_gid=$am_max_uid
+ # The $UID and $GID variables are not portable, so we need to resort
+ # to the POSIX-mandated id(1) utility. Errors in the 'id' calls
+ # below are definitely unexpected, so allow the users to see them
+ # (that is, avoid stderr redirection).
+ am_uid=`id -u || echo unknown`
+ am_gid=`id -g || echo unknown`
+ AC_MSG_CHECKING([whether UID '$am_uid' is supported by ustar format])
+ if test $am_uid -le $am_max_uid; then
+ AC_MSG_RESULT([yes])
+ else
+ AC_MSG_RESULT([no])
+ _am_tools=none
+ fi
+ AC_MSG_CHECKING([whether GID '$am_gid' is supported by ustar format])
+ if test $am_gid -le $am_max_gid; then
+ AC_MSG_RESULT([yes])
+ else
+ AC_MSG_RESULT([no])
+ _am_tools=none
+ fi],
+
+ [pax],
+ [],
+
+ [m4_fatal([Unknown tar format])])
+
+ AC_MSG_CHECKING([how to create a $1 tar archive])
+
+ # Go ahead even if we have the value already cached. We do so because we
+ # need to set the values for the 'am__tar' and 'am__untar' variables.
+ _am_tools=${am_cv_prog_tar_$1-$_am_tools}
+
+ for _am_tool in $_am_tools; do
+ case $_am_tool in
+ gnutar)
+ for _am_tar in tar gnutar gtar; do
+ AM_RUN_LOG([$_am_tar --version]) && break
+ done
+ am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
+ am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
+ am__untar="$_am_tar -xf -"
+ ;;
+ plaintar)
+ # Must skip GNU tar: if it does not support --format= it doesn't create
+ # ustar tarball either.
+ (tar --version) >/dev/null 2>&1 && continue
+ am__tar='tar chf - "$$tardir"'
+ am__tar_='tar chf - "$tardir"'
+ am__untar='tar xf -'
+ ;;
+ pax)
+ am__tar='pax -L -x $1 -w "$$tardir"'
+ am__tar_='pax -L -x $1 -w "$tardir"'
+ am__untar='pax -r'
+ ;;
+ cpio)
+ am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
+ am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
+ am__untar='cpio -i -H $1 -d'
+ ;;
+ none)
+ am__tar=false
+ am__tar_=false
+ am__untar=false
+ ;;
+ esac
+
+ # If the value was cached, stop now. We just wanted to have am__tar
+ # and am__untar set.
+ test -n "${am_cv_prog_tar_$1}" && break
+
+ # tar/untar a dummy directory, and stop if the command works.
+ rm -rf conftest.dir
+ mkdir conftest.dir
+ echo GrepMe > conftest.dir/file
+ AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
+ rm -rf conftest.dir
+ if test -s conftest.tar; then
+ AM_RUN_LOG([$am__untar <conftest.tar])
+ AM_RUN_LOG([cat conftest.dir/file])
+ grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
+ fi
+ done
+ rm -rf conftest.dir
+
+ AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
+ AC_MSG_RESULT([$am_cv_prog_tar_$1])])
+
+AC_SUBST([am__tar])
+AC_SUBST([am__untar])
+]) # _AM_PROG_TAR
+
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/install-sh
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/install-sh (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/install-sh (revision 1772)
@@ -0,0 +1,520 @@
+#!/bin/sh
+# install - install a program, script, or datafile
+
+scriptversion=2009-04-28.21; # UTC
+
+# This originates from X11R5 (mit/util/scripts/install.sh), which was
+# later released in X11R6 (xc/config/util/install.sh) with the
+# following copyright and license.
+#
+# Copyright (C) 1994 X Consortium
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documentation files (the "Software"), to
+# deal in the Software without restriction, including without limitation the
+# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+# sell copies of the Software, and to permit persons to whom the Software is
+# furnished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
+# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
+# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+#
+# Except as contained in this notice, the name of the X Consortium shall not
+# be used in advertising or otherwise to promote the sale, use or other deal-
+# ings in this Software without prior written authorization from the X Consor-
+# tium.
+#
+#
+# FSF changes to this file are in the public domain.
+#
+# Calling this script install-sh is preferred over install.sh, to prevent
+# `make' implicit rules from creating a file called install from it
+# when there is no Makefile.
+#
+# This script is compatible with the BSD install script, but was written
+# from scratch.
+
+nl='
+'
+IFS=" "" $nl"
+
+# set DOITPROG to echo to test this script
+
+# Don't use :- since 4.3BSD and earlier shells don't like it.
+doit=${DOITPROG-}
+if test -z "$doit"; then
+ doit_exec=exec
+else
+ doit_exec=$doit
+fi
+
+# Put in absolute file names if you don't have them in your path;
+# or use environment vars.
+
+chgrpprog=${CHGRPPROG-chgrp}
+chmodprog=${CHMODPROG-chmod}
+chownprog=${CHOWNPROG-chown}
+cmpprog=${CMPPROG-cmp}
+cpprog=${CPPROG-cp}
+mkdirprog=${MKDIRPROG-mkdir}
+mvprog=${MVPROG-mv}
+rmprog=${RMPROG-rm}
+stripprog=${STRIPPROG-strip}
+
+posix_glob='?'
+initialize_posix_glob='
+ test "$posix_glob" != "?" || {
+ if (set -f) 2>/dev/null; then
+ posix_glob=
+ else
+ posix_glob=:
+ fi
+ }
+'
+
+posix_mkdir=
+
+# Desired mode of installed file.
+mode=0755
+
+chgrpcmd=
+chmodcmd=$chmodprog
+chowncmd=
+mvcmd=$mvprog
+rmcmd="$rmprog -f"
+stripcmd=
+
+src=
+dst=
+dir_arg=
+dst_arg=
+
+copy_on_change=false
+no_target_directory=
+
+usage="\
+Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
+ or: $0 [OPTION]... SRCFILES... DIRECTORY
+ or: $0 [OPTION]... -t DIRECTORY SRCFILES...
+ or: $0 [OPTION]... -d DIRECTORIES...
+
+In the 1st form, copy SRCFILE to DSTFILE.
+In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
+In the 4th, create DIRECTORIES.
+
+Options:
+ --help display this help and exit.
+ --version display version info and exit.
+
+ -c (ignored)
+ -C install only if different (preserve the last data modification time)
+ -d create directories instead of installing files.
+ -g GROUP $chgrpprog installed files to GROUP.
+ -m MODE $chmodprog installed files to MODE.
+ -o USER $chownprog installed files to USER.
+ -s $stripprog installed files.
+ -t DIRECTORY install into DIRECTORY.
+ -T report an error if DSTFILE is a directory.
+
+Environment variables override the default commands:
+ CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG
+ RMPROG STRIPPROG
+"
+
+while test $# -ne 0; do
+ case $1 in
+ -c) ;;
+
+ -C) copy_on_change=true;;
+
+ -d) dir_arg=true;;
+
+ -g) chgrpcmd="$chgrpprog $2"
+ shift;;
+
+ --help) echo "$usage"; exit $?;;
+
+ -m) mode=$2
+ case $mode in
+ *' '* | *' '* | *'
+'* | *'*'* | *'?'* | *'['*)
+ echo "$0: invalid mode: $mode" >&2
+ exit 1;;
+ esac
+ shift;;
+
+ -o) chowncmd="$chownprog $2"
+ shift;;
+
+ -s) stripcmd=$stripprog;;
+
+ -t) dst_arg=$2
+ shift;;
+
+ -T) no_target_directory=true;;
+
+ --version) echo "$0 $scriptversion"; exit $?;;
+
+ --) shift
+ break;;
+
+ -*) echo "$0: invalid option: $1" >&2
+ exit 1;;
+
+ *) break;;
+ esac
+ shift
+done
+
+if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
+ # When -d is used, all remaining arguments are directories to create.
+ # When -t is used, the destination is already specified.
+ # Otherwise, the last argument is the destination. Remove it from $@.
+ for arg
+ do
+ if test -n "$dst_arg"; then
+ # $@ is not empty: it contains at least $arg.
+ set fnord "$@" "$dst_arg"
+ shift # fnord
+ fi
+ shift # arg
+ dst_arg=$arg
+ done
+fi
+
+if test $# -eq 0; then
+ if test -z "$dir_arg"; then
+ echo "$0: no input file specified." >&2
+ exit 1
+ fi
+ # It's OK to call `install-sh -d' without argument.
+ # This can happen when creating conditional directories.
+ exit 0
+fi
+
+if test -z "$dir_arg"; then
+ trap '(exit $?); exit' 1 2 13 15
+
+ # Set umask so as not to create temps with too-generous modes.
+ # However, 'strip' requires both read and write access to temps.
+ case $mode in
+ # Optimize common cases.
+ *644) cp_umask=133;;
+ *755) cp_umask=22;;
+
+ *[0-7])
+ if test -z "$stripcmd"; then
+ u_plus_rw=
+ else
+ u_plus_rw='% 200'
+ fi
+ cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
+ *)
+ if test -z "$stripcmd"; then
+ u_plus_rw=
+ else
+ u_plus_rw=,u+rw
+ fi
+ cp_umask=$mode$u_plus_rw;;
+ esac
+fi
+
+for src
+do
+ # Protect names starting with `-'.
+ case $src in
+ -*) src=./$src;;
+ esac
+
+ if test -n "$dir_arg"; then
+ dst=$src
+ dstdir=$dst
+ test -d "$dstdir"
+ dstdir_status=$?
+ else
+
+ # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
+ # might cause directories to be created, which would be especially bad
+ # if $src (and thus $dsttmp) contains '*'.
+ if test ! -f "$src" && test ! -d "$src"; then
+ echo "$0: $src does not exist." >&2
+ exit 1
+ fi
+
+ if test -z "$dst_arg"; then
+ echo "$0: no destination specified." >&2
+ exit 1
+ fi
+
+ dst=$dst_arg
+ # Protect names starting with `-'.
+ case $dst in
+ -*) dst=./$dst;;
+ esac
+
+ # If destination is a directory, append the input filename; won't work
+ # if double slashes aren't ignored.
+ if test -d "$dst"; then
+ if test -n "$no_target_directory"; then
+ echo "$0: $dst_arg: Is a directory" >&2
+ exit 1
+ fi
+ dstdir=$dst
+ dst=$dstdir/`basename "$src"`
+ dstdir_status=0
+ else
+ # Prefer dirname, but fall back on a substitute if dirname fails.
+ dstdir=`
+ (dirname "$dst") 2>/dev/null ||
+ expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$dst" : 'X\(//\)[^/]' \| \
+ X"$dst" : 'X\(//\)$' \| \
+ X"$dst" : 'X\(/\)' \| . 2>/dev/null ||
+ echo X"$dst" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'
+ `
+
+ test -d "$dstdir"
+ dstdir_status=$?
+ fi
+ fi
+
+ obsolete_mkdir_used=false
+
+ if test $dstdir_status != 0; then
+ case $posix_mkdir in
+ '')
+ # Create intermediate dirs using mode 755 as modified by the umask.
+ # This is like FreeBSD 'install' as of 1997-10-28.
+ umask=`umask`
+ case $stripcmd.$umask in
+ # Optimize common cases.
+ *[2367][2367]) mkdir_umask=$umask;;
+ .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
+
+ *[0-7])
+ mkdir_umask=`expr $umask + 22 \
+ - $umask % 100 % 40 + $umask % 20 \
+ - $umask % 10 % 4 + $umask % 2
+ `;;
+ *) mkdir_umask=$umask,go-w;;
+ esac
+
+ # With -d, create the new directory with the user-specified mode.
+ # Otherwise, rely on $mkdir_umask.
+ if test -n "$dir_arg"; then
+ mkdir_mode=-m$mode
+ else
+ mkdir_mode=
+ fi
+
+ posix_mkdir=false
+ case $umask in
+ *[123567][0-7][0-7])
+ # POSIX mkdir -p sets u+wx bits regardless of umask, which
+ # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
+ ;;
+ *)
+ tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
+ trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
+
+ if (umask $mkdir_umask &&
+ exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
+ then
+ if test -z "$dir_arg" || {
+ # Check for POSIX incompatibilities with -m.
+ # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
+ # other-writeable bit of parent directory when it shouldn't.
+ # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
+ ls_ld_tmpdir=`ls -ld "$tmpdir"`
+ case $ls_ld_tmpdir in
+ d????-?r-*) different_mode=700;;
+ d????-?--*) different_mode=755;;
+ *) false;;
+ esac &&
+ $mkdirprog -m$different_mode -p -- "$tmpdir" && {
+ ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
+ test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
+ }
+ }
+ then posix_mkdir=:
+ fi
+ rmdir "$tmpdir/d" "$tmpdir"
+ else
+ # Remove any dirs left behind by ancient mkdir implementations.
+ rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
+ fi
+ trap '' 0;;
+ esac;;
+ esac
+
+ if
+ $posix_mkdir && (
+ umask $mkdir_umask &&
+ $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
+ )
+ then :
+ else
+
+ # The umask is ridiculous, or mkdir does not conform to POSIX,
+ # or it failed possibly due to a race condition. Create the
+ # directory the slow way, step by step, checking for races as we go.
+
+ case $dstdir in
+ /*) prefix='/';;
+ -*) prefix='./';;
+ *) prefix='';;
+ esac
+
+ eval "$initialize_posix_glob"
+
+ oIFS=$IFS
+ IFS=/
+ $posix_glob set -f
+ set fnord $dstdir
+ shift
+ $posix_glob set +f
+ IFS=$oIFS
+
+ prefixes=
+
+ for d
+ do
+ test -z "$d" && continue
+
+ prefix=$prefix$d
+ if test -d "$prefix"; then
+ prefixes=
+ else
+ if $posix_mkdir; then
+ (umask=$mkdir_umask &&
+ $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
+ # Don't fail if two instances are running concurrently.
+ test -d "$prefix" || exit 1
+ else
+ case $prefix in
+ *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
+ *) qprefix=$prefix;;
+ esac
+ prefixes="$prefixes '$qprefix'"
+ fi
+ fi
+ prefix=$prefix/
+ done
+
+ if test -n "$prefixes"; then
+ # Don't fail if two instances are running concurrently.
+ (umask $mkdir_umask &&
+ eval "\$doit_exec \$mkdirprog $prefixes") ||
+ test -d "$dstdir" || exit 1
+ obsolete_mkdir_used=true
+ fi
+ fi
+ fi
+
+ if test -n "$dir_arg"; then
+ { test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
+ { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
+ { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
+ test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1
+ else
+
+ # Make a couple of temp file names in the proper directory.
+ dsttmp=$dstdir/_inst.$$_
+ rmtmp=$dstdir/_rm.$$_
+
+ # Trap to clean up those temp files at exit.
+ trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
+
+ # Copy the file name to the temp name.
+ (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") &&
+
+ # and set any options; do chmod last to preserve setuid bits.
+ #
+ # If any of these fail, we abort the whole thing. If we want to
+ # ignore errors from any of these, just make sure not to ignore
+ # errors from the above "$doit $cpprog $src $dsttmp" command.
+ #
+ { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } &&
+ { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } &&
+ { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } &&
+ { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
+
+ # If -C, don't bother to copy if it wouldn't change the file.
+ if $copy_on_change &&
+ old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` &&
+ new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` &&
+
+ eval "$initialize_posix_glob" &&
+ $posix_glob set -f &&
+ set X $old && old=:$2:$4:$5:$6 &&
+ set X $new && new=:$2:$4:$5:$6 &&
+ $posix_glob set +f &&
+
+ test "$old" = "$new" &&
+ $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
+ then
+ rm -f "$dsttmp"
+ else
+ # Rename the file to the real destination.
+ $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null ||
+
+ # The rename failed, perhaps because mv can't rename something else
+ # to itself, or perhaps because mv is so ancient that it does not
+ # support -f.
+ {
+ # Now remove or move aside any old file at destination location.
+ # We try this two ways since rm can't unlink itself on some
+ # systems and the destination file might be busy for other
+ # reasons. In this case, the final cleanup might fail but the new
+ # file should still install successfully.
+ {
+ test ! -f "$dst" ||
+ $doit $rmcmd -f "$dst" 2>/dev/null ||
+ { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
+ { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
+ } ||
+ { echo "$0: cannot unlink or rename $dst" >&2
+ (exit 1); exit 1
+ }
+ } &&
+
+ # Now rename the file to the real destination.
+ $doit $mvcmd "$dsttmp" "$dst"
+ }
+ fi || exit 1
+
+ trap '' 0
+ fi
+done
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
+# End:
Property changes on: nnlo-bridge/tags/nnlo-bridge-00-00-44/install-sh
___________________________________________________________________
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/configure
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/configure (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/configure (revision 1772)
@@ -0,0 +1,18716 @@
+#! /bin/sh
+# Guess values for system-dependent variables and create Makefiles.
+# Generated by GNU Autoconf 2.69 for nnlo-bridge 0.0.44.
+#
+# Report bugs to <sutt@cern.ch>.
+#
+#
+# Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc.
+#
+#
+# This configure script is free software; the Free Software Foundation
+# gives unlimited permission to copy, distribute and modify it.
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
+ emulate sh
+ NULLCMD=:
+ # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '${1+"$@"}'='"$@"'
+ setopt NO_GLOB_SUBST
+else
+ case `(set -o) 2>/dev/null` in #(
+ *posix*) :
+ set -o posix ;; #(
+ *) :
+ ;;
+esac
+fi
+
+
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+# Prefer a ksh shell builtin over an external printf program on Solaris,
+# but without wasting forks for bash or zsh.
+if test -z "$BASH_VERSION$ZSH_VERSION" \
+ && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
+ as_echo='print -r --'
+ as_echo_n='print -rn --'
+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+ as_echo='printf %s\n'
+ as_echo_n='printf %s'
+else
+ if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+ as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+ as_echo_n='/usr/ucb/echo -n'
+ else
+ as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+ as_echo_n_body='eval
+ arg=$1;
+ case $arg in #(
+ *"$as_nl"*)
+ expr "X$arg" : "X\\(.*\\)$as_nl";
+ arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+ esac;
+ expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+ '
+ export as_echo_n_body
+ as_echo_n='sh -c $as_echo_n_body as_echo'
+ fi
+ export as_echo_body
+ as_echo='sh -c $as_echo_body as_echo'
+fi
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ PATH_SEPARATOR=:
+ (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+ (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+ PATH_SEPARATOR=';'
+ }
+fi
+
+
+# IFS
+# We need space, tab and new line, in precisely that order. Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+IFS=" "" $as_nl"
+
+# Find who we are. Look in the path if we contain no directory separator.
+as_myself=
+case $0 in #((
+ *[\\/]* ) as_myself=$0 ;;
+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+ as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+ $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+ exit 1
+fi
+
+# Unset variables that we do not need and which cause bugs (e.g. in
+# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1"
+# suppresses any "Segmentation fault" message there. '((' could
+# trigger a bug in pdksh 5.2.14.
+for as_var in BASH_ENV ENV MAIL MAILPATH
+do eval test x\${$as_var+set} = xset \
+ && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
+done
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
+
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+# Use a proper internal environment variable to ensure we don't fall
+ # into an infinite loop, continuously re-executing ourselves.
+ if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then
+ _as_can_reexec=no; export _as_can_reexec;
+ # We cannot yet assume a decent shell, so we have to provide a
+# neutralization value for shells without unset; and this also
+# works around shells that cannot unset nonexistent variables.
+# Preserve -v and -x to the replacement shell.
+BASH_ENV=/dev/null
+ENV=/dev/null
+(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
+case $- in # ((((
+ *v*x* | *x*v* ) as_opts=-vx ;;
+ *v* ) as_opts=-v ;;
+ *x* ) as_opts=-x ;;
+ * ) as_opts= ;;
+esac
+exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
+# Admittedly, this is quite paranoid, since all the known shells bail
+# out after a failed `exec'.
+$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2
+as_fn_exit 255
+ fi
+ # We don't want this to propagate to other subprocesses.
+ { _as_can_reexec=; unset _as_can_reexec;}
+if test "x$CONFIG_SHELL" = x; then
+ as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then :
+ emulate sh
+ NULLCMD=:
+ # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '\${1+\"\$@\"}'='\"\$@\"'
+ setopt NO_GLOB_SUBST
+else
+ case \`(set -o) 2>/dev/null\` in #(
+ *posix*) :
+ set -o posix ;; #(
+ *) :
+ ;;
+esac
+fi
+"
+ as_required="as_fn_return () { (exit \$1); }
+as_fn_success () { as_fn_return 0; }
+as_fn_failure () { as_fn_return 1; }
+as_fn_ret_success () { return 0; }
+as_fn_ret_failure () { return 1; }
+
+exitcode=0
+as_fn_success || { exitcode=1; echo as_fn_success failed.; }
+as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; }
+as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; }
+as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; }
+if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then :
+
+else
+ exitcode=1; echo positional parameters were not saved.
+fi
+test x\$exitcode = x0 || exit 1
+test -x / || exit 1"
+ as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO
+ as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
+ eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
+ test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1
+
+ test -n \"\${ZSH_VERSION+set}\${BASH_VERSION+set}\" || (
+ ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+ ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO
+ ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO
+ PATH=/empty FPATH=/empty; export PATH FPATH
+ test \"X\`printf %s \$ECHO\`\" = \"X\$ECHO\" \\
+ || test \"X\`print -r -- \$ECHO\`\" = \"X\$ECHO\" ) || exit 1
+test \$(( 1 + 1 )) = 2 || exit 1"
+ if (eval "$as_required") 2>/dev/null; then :
+ as_have_required=yes
+else
+ as_have_required=no
+fi
+ if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then :
+
+else
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+as_found=false
+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ as_found=:
+ case $as_dir in #(
+ /*)
+ for as_base in sh bash ksh sh5; do
+ # Try only shells that exist, to save several forks.
+ as_shell=$as_dir/$as_base
+ if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
+ { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then :
+ CONFIG_SHELL=$as_shell as_have_required=yes
+ if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then :
+ break 2
+fi
+fi
+ done;;
+ esac
+ as_found=false
+done
+$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } &&
+ { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then :
+ CONFIG_SHELL=$SHELL as_have_required=yes
+fi; }
+IFS=$as_save_IFS
+
+
+ if test "x$CONFIG_SHELL" != x; then :
+ export CONFIG_SHELL
+ # We cannot yet assume a decent shell, so we have to provide a
+# neutralization value for shells without unset; and this also
+# works around shells that cannot unset nonexistent variables.
+# Preserve -v and -x to the replacement shell.
+BASH_ENV=/dev/null
+ENV=/dev/null
+(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
+case $- in # ((((
+ *v*x* | *x*v* ) as_opts=-vx ;;
+ *v* ) as_opts=-v ;;
+ *x* ) as_opts=-x ;;
+ * ) as_opts= ;;
+esac
+exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
+# Admittedly, this is quite paranoid, since all the known shells bail
+# out after a failed `exec'.
+$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2
+exit 255
+fi
+
+ if test x$as_have_required = xno; then :
+ $as_echo "$0: This script requires a shell more modern than all"
+ $as_echo "$0: the shells that I found on your system."
+ if test x${ZSH_VERSION+set} = xset ; then
+ $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should"
+ $as_echo "$0: be upgraded to zsh 4.3.4 or later."
+ else
+ $as_echo "$0: Please tell bug-autoconf@gnu.org and sutt@cern.ch about
+$0: your system, including any error possibly output before
+$0: this message. Then install a modern shell, or manually
+$0: run the script under such a shell if you do have one."
+ fi
+ exit 1
+fi
+fi
+fi
+SHELL=${CONFIG_SHELL-/bin/sh}
+export SHELL
+# Unset more variables known to interfere with behavior of common tools.
+CLICOLOR_FORCE= GREP_OPTIONS=
+unset CLICOLOR_FORCE GREP_OPTIONS
+
+## --------------------- ##
+## M4sh Shell Functions. ##
+## --------------------- ##
+# as_fn_unset VAR
+# ---------------
+# Portably unset VAR.
+as_fn_unset ()
+{
+ { eval $1=; unset $1;}
+}
+as_unset=as_fn_unset
+
+# as_fn_set_status STATUS
+# -----------------------
+# Set $? to STATUS, without forking.
+as_fn_set_status ()
+{
+ return $1
+} # as_fn_set_status
+
+# as_fn_exit STATUS
+# -----------------
+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
+as_fn_exit ()
+{
+ set +e
+ as_fn_set_status $1
+ exit $1
+} # as_fn_exit
+
+# as_fn_mkdir_p
+# -------------
+# Create "$as_dir" as a directory, including parents if necessary.
+as_fn_mkdir_p ()
+{
+
+ case $as_dir in #(
+ -*) as_dir=./$as_dir;;
+ esac
+ test -d "$as_dir" || eval $as_mkdir_p || {
+ as_dirs=
+ while :; do
+ case $as_dir in #(
+ *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+ *) as_qdir=$as_dir;;
+ esac
+ as_dirs="'$as_qdir' $as_dirs"
+ as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$as_dir" : 'X\(//\)[^/]' \| \
+ X"$as_dir" : 'X\(//\)$' \| \
+ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_dir" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ test -d "$as_dir" && break
+ done
+ test -z "$as_dirs" || eval "mkdir $as_dirs"
+ } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
+
+
+} # as_fn_mkdir_p
+
+# as_fn_executable_p FILE
+# -----------------------
+# Test if FILE is an executable regular file.
+as_fn_executable_p ()
+{
+ test -f "$1" && test -x "$1"
+} # as_fn_executable_p
+# as_fn_append VAR VALUE
+# ----------------------
+# Append the text in VALUE to the end of the definition contained in VAR. Take
+# advantage of any shell optimizations that allow amortized linear growth over
+# repeated appends, instead of the typical quadratic growth present in naive
+# implementations.
+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
+ eval 'as_fn_append ()
+ {
+ eval $1+=\$2
+ }'
+else
+ as_fn_append ()
+ {
+ eval $1=\$$1\$2
+ }
+fi # as_fn_append
+
+# as_fn_arith ARG...
+# ------------------
+# Perform arithmetic evaluation on the ARGs, and store the result in the
+# global $as_val. Take advantage of shells that can avoid forks. The arguments
+# must be portable across $(()) and expr.
+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
+ eval 'as_fn_arith ()
+ {
+ as_val=$(( $* ))
+ }'
+else
+ as_fn_arith ()
+ {
+ as_val=`expr "$@" || test $? -eq 1`
+ }
+fi # as_fn_arith
+
+
+# as_fn_error STATUS ERROR [LINENO LOG_FD]
+# ----------------------------------------
+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
+# script with STATUS, using 1 if that was 0.
+as_fn_error ()
+{
+ as_status=$1; test $as_status -eq 0 && as_status=1
+ if test "$4"; then
+ as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
+ fi
+ $as_echo "$as_me: error: $2" >&2
+ as_fn_exit $as_status
+} # as_fn_error
+
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+ test "X`expr 00001 : '.*\(...\)'`" = X001; then
+ as_expr=expr
+else
+ as_expr=false
+fi
+
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+ as_basename=basename
+else
+ as_basename=false
+fi
+
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+ as_dirname=dirname
+else
+ as_dirname=false
+fi
+
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+ X"$0" : 'X\(//\)$' \| \
+ X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X/"$0" |
+ sed '/^.*\/\([^/][^/]*\)\/*$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+
+ as_lineno_1=$LINENO as_lineno_1a=$LINENO
+ as_lineno_2=$LINENO as_lineno_2a=$LINENO
+ eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" &&
+ test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || {
+ # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-)
+ sed -n '
+ p
+ /[$]LINENO/=
+ ' <$as_myself |
+ sed '
+ s/[$]LINENO.*/&-/
+ t lineno
+ b
+ :lineno
+ N
+ :loop
+ s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
+ t loop
+ s/-\n.*//
+ ' >$as_me.lineno &&
+ chmod +x "$as_me.lineno" ||
+ { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; }
+
+ # If we had to re-execute with $CONFIG_SHELL, we're ensured to have
+ # already done that, so ensure we don't try to do so again and fall
+ # in an infinite loop. This has already happened in practice.
+ _as_can_reexec=no; export _as_can_reexec
+ # Don't try to exec as it changes $[0], causing all sort of problems
+ # (the dirname of $[0] is not the place where we might find the
+ # original and so on. Autoconf is especially sensitive to this).
+ . "./$as_me.lineno"
+ # Exit status is that of the last command.
+ exit
+}
+
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in #(((((
+-n*)
+ case `echo 'xy\c'` in
+ *c*) ECHO_T=' ';; # ECHO_T is single tab character.
+ xy) ECHO_C='\c';;
+ *) echo `echo ksh88 bug on AIX 6.1` > /dev/null
+ ECHO_T=' ';;
+ esac;;
+*)
+ ECHO_N='-n';;
+esac
+
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+ rm -f conf$$.dir/conf$$.file
+else
+ rm -f conf$$.dir
+ mkdir conf$$.dir 2>/dev/null
+fi
+if (echo >conf$$.file) 2>/dev/null; then
+ if ln -s conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s='ln -s'
+ # ... but there are two gotchas:
+ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+ # In both cases, we have to default to `cp -pR'.
+ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+ as_ln_s='cp -pR'
+ elif ln conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s=ln
+ else
+ as_ln_s='cp -pR'
+ fi
+else
+ as_ln_s='cp -pR'
+fi
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
+
+if mkdir -p . 2>/dev/null; then
+ as_mkdir_p='mkdir -p "$as_dir"'
+else
+ test -d ./-p && rmdir ./-p
+ as_mkdir_p=false
+fi
+
+as_test_x='test -x'
+as_executable_p=as_fn_executable_p
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+SHELL=${CONFIG_SHELL-/bin/sh}
+
+
+test -n "$DJDIR" || exec 7<&0 </dev/null
+exec 6>&1
+
+# Name of the host.
+# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status,
+# so uname gets run too.
+ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
+
+#
+# Initializations.
+#
+ac_default_prefix=/usr/local
+ac_clean_files=
+ac_config_libobj_dir=.
+LIBOBJS=
+cross_compiling=no
+subdirs=
+MFLAGS=
+MAKEFLAGS=
+
+# Identity of this package.
+PACKAGE_NAME='nnlo-bridge'
+PACKAGE_TARNAME='nnlo-bridge'
+PACKAGE_VERSION='0.0.44'
+PACKAGE_STRING='nnlo-bridge 0.0.44'
+PACKAGE_BUGREPORT='sutt@cern.ch'
+PACKAGE_URL='http://applgrid.hepforge.org'
+
+# Factoring default headers for most tests.
+ac_includes_default="\
+#include <stdio.h>
+#ifdef HAVE_SYS_TYPES_H
+# include <sys/types.h>
+#endif
+#ifdef HAVE_SYS_STAT_H
+# include <sys/stat.h>
+#endif
+#ifdef STDC_HEADERS
+# include <stdlib.h>
+# include <stddef.h>
+#else
+# ifdef HAVE_STDLIB_H
+# include <stdlib.h>
+# endif
+#endif
+#ifdef HAVE_STRING_H
+# if !defined STDC_HEADERS && defined HAVE_MEMORY_H
+# include <memory.h>
+# endif
+# include <string.h>
+#endif
+#ifdef HAVE_STRINGS_H
+# include <strings.h>
+#endif
+#ifdef HAVE_INTTYPES_H
+# include <inttypes.h>
+#endif
+#ifdef HAVE_STDINT_H
+# include <stdint.h>
+#endif
+#ifdef HAVE_UNISTD_H
+# include <unistd.h>
+#endif"
+
+ac_header_list=
+ac_subst_vars='am__EXEEXT_FALSE
+am__EXEEXT_TRUE
+LTLIBOBJS
+LIBOBJS
+USE_FASTNLO_FALSE
+USE_FASTNLO_TRUE
+FASTNLO_CXXFLAGS
+FASTNLO_LDFLAGS
+FASTNLOPATH
+USE_APPLGRID_FALSE
+USE_APPLGRID_TRUE
+APPLGRID_CXXFLAGS
+APPLGRID_LDFLAGS
+USE_CERNROOT_FALSE
+USE_CERNROOT_TRUE
+ROOT_LIBS
+ROOT_CFLAGS
+ROOT_LDFLAGS
+CERNROOT_LDFLAGS
+APPLPATH
+ROOTPATH
+CXXCPP
+CPP
+LT_SYS_LIBRARY_PATH
+OTOOL64
+OTOOL
+LIPO
+NMEDIT
+DSYMUTIL
+MANIFEST_TOOL
+RANLIB
+ac_ct_AR
+AR
+DLLTOOL
+OBJDUMP
+LN_S
+NM
+ac_ct_DUMPBIN
+DUMPBIN
+LD
+FGREP
+EGREP
+GREP
+SED
+host_os
+host_vendor
+host_cpu
+host
+build_os
+build_vendor
+build_cpu
+build
+LIBTOOL
+am__fastdepCXX_FALSE
+am__fastdepCXX_TRUE
+CXXDEPMODE
+ac_ct_CXX
+CXXFLAGS
+CXX
+am__fastdepCC_FALSE
+am__fastdepCC_TRUE
+CCDEPMODE
+am__nodep
+AMDEPBACKSLASH
+AMDEP_FALSE
+AMDEP_TRUE
+am__quote
+am__include
+DEPDIR
+OBJEXT
+EXEEXT
+ac_ct_CC
+CPPFLAGS
+LDFLAGS
+CFLAGS
+CC
+AM_BACKSLASH
+AM_DEFAULT_VERBOSITY
+AM_DEFAULT_V
+AM_V
+am__untar
+am__tar
+AMTAR
+am__leading_dot
+SET_MAKE
+AWK
+mkdir_p
+MKDIR_P
+INSTALL_STRIP_PROGRAM
+STRIP
+install_sh
+MAKEINFO
+AUTOHEADER
+AUTOMAKE
+AUTOCONF
+ACLOCAL
+VERSION
+PACKAGE
+CYGPATH_W
+am__isrc
+INSTALL_DATA
+INSTALL_SCRIPT
+INSTALL_PROGRAM
+target_alias
+host_alias
+build_alias
+LIBS
+ECHO_T
+ECHO_N
+ECHO_C
+DEFS
+mandir
+localedir
+libdir
+psdir
+pdfdir
+dvidir
+htmldir
+infodir
+docdir
+oldincludedir
+includedir
+localstatedir
+sharedstatedir
+sysconfdir
+datadir
+datarootdir
+libexecdir
+sbindir
+bindir
+program_transform_name
+prefix
+exec_prefix
+PACKAGE_URL
+PACKAGE_BUGREPORT
+PACKAGE_STRING
+PACKAGE_VERSION
+PACKAGE_TARNAME
+PACKAGE_NAME
+PATH_SEPARATOR
+SHELL'
+ac_subst_files=''
+ac_user_opts='
+enable_option_checking
+enable_silent_rules
+enable_dependency_tracking
+enable_shared
+enable_static
+with_pic
+enable_fast_install
+with_aix_soname
+with_gnu_ld
+with_sysroot
+enable_libtool_lock
+'
+ ac_precious_vars='build_alias
+host_alias
+target_alias
+CC
+CFLAGS
+LDFLAGS
+LIBS
+CPPFLAGS
+CXX
+CXXFLAGS
+CCC
+LT_SYS_LIBRARY_PATH
+CPP
+CXXCPP'
+
+
+# Initialize some variables set by options.
+ac_init_help=
+ac_init_version=false
+ac_unrecognized_opts=
+ac_unrecognized_sep=
+# The variables have the same names as the options, with
+# dashes changed to underlines.
+cache_file=/dev/null
+exec_prefix=NONE
+no_create=
+no_recursion=
+prefix=NONE
+program_prefix=NONE
+program_suffix=NONE
+program_transform_name=s,x,x,
+silent=
+site=
+srcdir=
+verbose=
+x_includes=NONE
+x_libraries=NONE
+
+# Installation directory options.
+# These are left unexpanded so users can "make install exec_prefix=/foo"
+# and all the variables that are supposed to be based on exec_prefix
+# by default will actually change.
+# Use braces instead of parens because sh, perl, etc. also accept them.
+# (The list follows the same order as the GNU Coding Standards.)
+bindir='${exec_prefix}/bin'
+sbindir='${exec_prefix}/sbin'
+libexecdir='${exec_prefix}/libexec'
+datarootdir='${prefix}/share'
+datadir='${datarootdir}'
+sysconfdir='${prefix}/etc'
+sharedstatedir='${prefix}/com'
+localstatedir='${prefix}/var'
+includedir='${prefix}/include'
+oldincludedir='/usr/include'
+docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
+infodir='${datarootdir}/info'
+htmldir='${docdir}'
+dvidir='${docdir}'
+pdfdir='${docdir}'
+psdir='${docdir}'
+libdir='${exec_prefix}/lib'
+localedir='${datarootdir}/locale'
+mandir='${datarootdir}/man'
+
+ac_prev=
+ac_dashdash=
+for ac_option
+do
+ # If the previous option needs an argument, assign it.
+ if test -n "$ac_prev"; then
+ eval $ac_prev=\$ac_option
+ ac_prev=
+ continue
+ fi
+
+ case $ac_option in
+ *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
+ *=) ac_optarg= ;;
+ *) ac_optarg=yes ;;
+ esac
+
+ # Accept the important Cygnus configure options, so we can diagnose typos.
+
+ case $ac_dashdash$ac_option in
+ --)
+ ac_dashdash=yes ;;
+
+ -bindir | --bindir | --bindi | --bind | --bin | --bi)
+ ac_prev=bindir ;;
+ -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
+ bindir=$ac_optarg ;;
+
+ -build | --build | --buil | --bui | --bu)
+ ac_prev=build_alias ;;
+ -build=* | --build=* | --buil=* | --bui=* | --bu=*)
+ build_alias=$ac_optarg ;;
+
+ -cache-file | --cache-file | --cache-fil | --cache-fi \
+ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
+ ac_prev=cache_file ;;
+ -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
+ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
+ cache_file=$ac_optarg ;;
+
+ --config-cache | -C)
+ cache_file=config.cache ;;
+
+ -datadir | --datadir | --datadi | --datad)
+ ac_prev=datadir ;;
+ -datadir=* | --datadir=* | --datadi=* | --datad=*)
+ datadir=$ac_optarg ;;
+
+ -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
+ | --dataroo | --dataro | --datar)
+ ac_prev=datarootdir ;;
+ -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
+ | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
+ datarootdir=$ac_optarg ;;
+
+ -disable-* | --disable-*)
+ ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+ as_fn_error $? "invalid feature name: $ac_useropt"
+ ac_useropt_orig=$ac_useropt
+ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+ case $ac_user_opts in
+ *"
+"enable_$ac_useropt"
+"*) ;;
+ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig"
+ ac_unrecognized_sep=', ';;
+ esac
+ eval enable_$ac_useropt=no ;;
+
+ -docdir | --docdir | --docdi | --doc | --do)
+ ac_prev=docdir ;;
+ -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
+ docdir=$ac_optarg ;;
+
+ -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
+ ac_prev=dvidir ;;
+ -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
+ dvidir=$ac_optarg ;;
+
+ -enable-* | --enable-*)
+ ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+ as_fn_error $? "invalid feature name: $ac_useropt"
+ ac_useropt_orig=$ac_useropt
+ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+ case $ac_user_opts in
+ *"
+"enable_$ac_useropt"
+"*) ;;
+ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig"
+ ac_unrecognized_sep=', ';;
+ esac
+ eval enable_$ac_useropt=\$ac_optarg ;;
+
+ -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
+ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
+ | --exec | --exe | --ex)
+ ac_prev=exec_prefix ;;
+ -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
+ | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
+ | --exec=* | --exe=* | --ex=*)
+ exec_prefix=$ac_optarg ;;
+
+ -gas | --gas | --ga | --g)
+ # Obsolete; use --with-gas.
+ with_gas=yes ;;
+
+ -help | --help | --hel | --he | -h)
+ ac_init_help=long ;;
+ -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
+ ac_init_help=recursive ;;
+ -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
+ ac_init_help=short ;;
+
+ -host | --host | --hos | --ho)
+ ac_prev=host_alias ;;
+ -host=* | --host=* | --hos=* | --ho=*)
+ host_alias=$ac_optarg ;;
+
+ -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
+ ac_prev=htmldir ;;
+ -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
+ | --ht=*)
+ htmldir=$ac_optarg ;;
+
+ -includedir | --includedir | --includedi | --included | --include \
+ | --includ | --inclu | --incl | --inc)
+ ac_prev=includedir ;;
+ -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
+ | --includ=* | --inclu=* | --incl=* | --inc=*)
+ includedir=$ac_optarg ;;
+
+ -infodir | --infodir | --infodi | --infod | --info | --inf)
+ ac_prev=infodir ;;
+ -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
+ infodir=$ac_optarg ;;
+
+ -libdir | --libdir | --libdi | --libd)
+ ac_prev=libdir ;;
+ -libdir=* | --libdir=* | --libdi=* | --libd=*)
+ libdir=$ac_optarg ;;
+
+ -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
+ | --libexe | --libex | --libe)
+ ac_prev=libexecdir ;;
+ -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
+ | --libexe=* | --libex=* | --libe=*)
+ libexecdir=$ac_optarg ;;
+
+ -localedir | --localedir | --localedi | --localed | --locale)
+ ac_prev=localedir ;;
+ -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
+ localedir=$ac_optarg ;;
+
+ -localstatedir | --localstatedir | --localstatedi | --localstated \
+ | --localstate | --localstat | --localsta | --localst | --locals)
+ ac_prev=localstatedir ;;
+ -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
+ | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
+ localstatedir=$ac_optarg ;;
+
+ -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
+ ac_prev=mandir ;;
+ -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
+ mandir=$ac_optarg ;;
+
+ -nfp | --nfp | --nf)
+ # Obsolete; use --without-fp.
+ with_fp=no ;;
+
+ -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+ | --no-cr | --no-c | -n)
+ no_create=yes ;;
+
+ -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
+ no_recursion=yes ;;
+
+ -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
+ | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
+ | --oldin | --oldi | --old | --ol | --o)
+ ac_prev=oldincludedir ;;
+ -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
+ | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
+ | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
+ oldincludedir=$ac_optarg ;;
+
+ -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
+ ac_prev=prefix ;;
+ -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
+ prefix=$ac_optarg ;;
+
+ -program-prefix | --program-prefix | --program-prefi | --program-pref \
+ | --program-pre | --program-pr | --program-p)
+ ac_prev=program_prefix ;;
+ -program-prefix=* | --program-prefix=* | --program-prefi=* \
+ | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
+ program_prefix=$ac_optarg ;;
+
+ -program-suffix | --program-suffix | --program-suffi | --program-suff \
+ | --program-suf | --program-su | --program-s)
+ ac_prev=program_suffix ;;
+ -program-suffix=* | --program-suffix=* | --program-suffi=* \
+ | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
+ program_suffix=$ac_optarg ;;
+
+ -program-transform-name | --program-transform-name \
+ | --program-transform-nam | --program-transform-na \
+ | --program-transform-n | --program-transform- \
+ | --program-transform | --program-transfor \
+ | --program-transfo | --program-transf \
+ | --program-trans | --program-tran \
+ | --progr-tra | --program-tr | --program-t)
+ ac_prev=program_transform_name ;;
+ -program-transform-name=* | --program-transform-name=* \
+ | --program-transform-nam=* | --program-transform-na=* \
+ | --program-transform-n=* | --program-transform-=* \
+ | --program-transform=* | --program-transfor=* \
+ | --program-transfo=* | --program-transf=* \
+ | --program-trans=* | --program-tran=* \
+ | --progr-tra=* | --program-tr=* | --program-t=*)
+ program_transform_name=$ac_optarg ;;
+
+ -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
+ ac_prev=pdfdir ;;
+ -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
+ pdfdir=$ac_optarg ;;
+
+ -psdir | --psdir | --psdi | --psd | --ps)
+ ac_prev=psdir ;;
+ -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
+ psdir=$ac_optarg ;;
+
+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+ | -silent | --silent | --silen | --sile | --sil)
+ silent=yes ;;
+
+ -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
+ ac_prev=sbindir ;;
+ -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
+ | --sbi=* | --sb=*)
+ sbindir=$ac_optarg ;;
+
+ -sharedstatedir | --sharedstatedir | --sharedstatedi \
+ | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
+ | --sharedst | --shareds | --shared | --share | --shar \
+ | --sha | --sh)
+ ac_prev=sharedstatedir ;;
+ -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
+ | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
+ | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
+ | --sha=* | --sh=*)
+ sharedstatedir=$ac_optarg ;;
+
+ -site | --site | --sit)
+ ac_prev=site ;;
+ -site=* | --site=* | --sit=*)
+ site=$ac_optarg ;;
+
+ -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
+ ac_prev=srcdir ;;
+ -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
+ srcdir=$ac_optarg ;;
+
+ -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
+ | --syscon | --sysco | --sysc | --sys | --sy)
+ ac_prev=sysconfdir ;;
+ -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
+ | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
+ sysconfdir=$ac_optarg ;;
+
+ -target | --target | --targe | --targ | --tar | --ta | --t)
+ ac_prev=target_alias ;;
+ -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
+ target_alias=$ac_optarg ;;
+
+ -v | -verbose | --verbose | --verbos | --verbo | --verb)
+ verbose=yes ;;
+
+ -version | --version | --versio | --versi | --vers | -V)
+ ac_init_version=: ;;
+
+ -with-* | --with-*)
+ ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+ as_fn_error $? "invalid package name: $ac_useropt"
+ ac_useropt_orig=$ac_useropt
+ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+ case $ac_user_opts in
+ *"
+"with_$ac_useropt"
+"*) ;;
+ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig"
+ ac_unrecognized_sep=', ';;
+ esac
+ eval with_$ac_useropt=\$ac_optarg ;;
+
+ -without-* | --without-*)
+ ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+ as_fn_error $? "invalid package name: $ac_useropt"
+ ac_useropt_orig=$ac_useropt
+ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+ case $ac_user_opts in
+ *"
+"with_$ac_useropt"
+"*) ;;
+ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig"
+ ac_unrecognized_sep=', ';;
+ esac
+ eval with_$ac_useropt=no ;;
+
+ --x)
+ # Obsolete; use --with-x.
+ with_x=yes ;;
+
+ -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
+ | --x-incl | --x-inc | --x-in | --x-i)
+ ac_prev=x_includes ;;
+ -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
+ | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
+ x_includes=$ac_optarg ;;
+
+ -x-libraries | --x-libraries | --x-librarie | --x-librari \
+ | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
+ ac_prev=x_libraries ;;
+ -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
+ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
+ x_libraries=$ac_optarg ;;
+
+ -*) as_fn_error $? "unrecognized option: \`$ac_option'
+Try \`$0 --help' for more information"
+ ;;
+
+ *=*)
+ ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
+ # Reject names that are not valid shell variable names.
+ case $ac_envvar in #(
+ '' | [0-9]* | *[!_$as_cr_alnum]* )
+ as_fn_error $? "invalid variable name: \`$ac_envvar'" ;;
+ esac
+ eval $ac_envvar=\$ac_optarg
+ export $ac_envvar ;;
+
+ *)
+ # FIXME: should be removed in autoconf 3.0.
+ $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2
+ expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
+ $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2
+ : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}"
+ ;;
+
+ esac
+done
+
+if test -n "$ac_prev"; then
+ ac_option=--`echo $ac_prev | sed 's/_/-/g'`
+ as_fn_error $? "missing argument to $ac_option"
+fi
+
+if test -n "$ac_unrecognized_opts"; then
+ case $enable_option_checking in
+ no) ;;
+ fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;;
+ *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;;
+ esac
+fi
+
+# Check all directory arguments for consistency.
+for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \
+ datadir sysconfdir sharedstatedir localstatedir includedir \
+ oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
+ libdir localedir mandir
+do
+ eval ac_val=\$$ac_var
+ # Remove trailing slashes.
+ case $ac_val in
+ */ )
+ ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'`
+ eval $ac_var=\$ac_val;;
+ esac
+ # Be sure to have absolute directory names.
+ case $ac_val in
+ [\\/$]* | ?:[\\/]* ) continue;;
+ NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
+ esac
+ as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val"
+done
+
+# There might be people who depend on the old broken behavior: `$host'
+# used to hold the argument of --host etc.
+# FIXME: To remove some day.
+build=$build_alias
+host=$host_alias
+target=$target_alias
+
+# FIXME: To remove some day.
+if test "x$host_alias" != x; then
+ if test "x$build_alias" = x; then
+ cross_compiling=maybe
+ elif test "x$build_alias" != "x$host_alias"; then
+ cross_compiling=yes
+ fi
+fi
+
+ac_tool_prefix=
+test -n "$host_alias" && ac_tool_prefix=$host_alias-
+
+test "$silent" = yes && exec 6>/dev/null
+
+
+ac_pwd=`pwd` && test -n "$ac_pwd" &&
+ac_ls_di=`ls -di .` &&
+ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
+ as_fn_error $? "working directory cannot be determined"
+test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
+ as_fn_error $? "pwd does not report name of working directory"
+
+
+# Find the source files, if location was not specified.
+if test -z "$srcdir"; then
+ ac_srcdir_defaulted=yes
+ # Try the directory containing this script, then the parent directory.
+ ac_confdir=`$as_dirname -- "$as_myself" ||
+$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$as_myself" : 'X\(//\)[^/]' \| \
+ X"$as_myself" : 'X\(//\)$' \| \
+ X"$as_myself" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_myself" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ srcdir=$ac_confdir
+ if test ! -r "$srcdir/$ac_unique_file"; then
+ srcdir=..
+ fi
+else
+ ac_srcdir_defaulted=no
+fi
+if test ! -r "$srcdir/$ac_unique_file"; then
+ test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
+ as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir"
+fi
+ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
+ac_abs_confdir=`(
+ cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg"
+ pwd)`
+# When building in place, set srcdir=.
+if test "$ac_abs_confdir" = "$ac_pwd"; then
+ srcdir=.
+fi
+# Remove unnecessary trailing slashes from srcdir.
+# Double slashes in file names in object file debugging info
+# mess up M-x gdb in Emacs.
+case $srcdir in
+*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
+esac
+for ac_var in $ac_precious_vars; do
+ eval ac_env_${ac_var}_set=\${${ac_var}+set}
+ eval ac_env_${ac_var}_value=\$${ac_var}
+ eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
+ eval ac_cv_env_${ac_var}_value=\$${ac_var}
+done
+
+#
+# Report the --help message.
+#
+if test "$ac_init_help" = "long"; then
+ # Omit some internal or obsolete options to make the list less imposing.
+ # This message is too long to be a string in the A/UX 3.1 sh.
+ cat <<_ACEOF
+\`configure' configures nnlo-bridge 0.0.44 to adapt to many kinds of systems.
+
+Usage: $0 [OPTION]... [VAR=VALUE]...
+
+To assign environment variables (e.g., CC, CFLAGS...), specify them as
+VAR=VALUE. See below for descriptions of some of the useful variables.
+
+Defaults for the options are specified in brackets.
+
+Configuration:
+ -h, --help display this help and exit
+ --help=short display options specific to this package
+ --help=recursive display the short help of all the included packages
+ -V, --version display version information and exit
+ -q, --quiet, --silent do not print \`checking ...' messages
+ --cache-file=FILE cache test results in FILE [disabled]
+ -C, --config-cache alias for \`--cache-file=config.cache'
+ -n, --no-create do not create output files
+ --srcdir=DIR find the sources in DIR [configure dir or \`..']
+
+Installation directories:
+ --prefix=PREFIX install architecture-independent files in PREFIX
+ [$ac_default_prefix]
+ --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
+ [PREFIX]
+
+By default, \`make install' will install all the files in
+\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify
+an installation prefix other than \`$ac_default_prefix' using \`--prefix',
+for instance \`--prefix=\$HOME'.
+
+For better control, use the options below.
+
+Fine tuning of the installation directories:
+ --bindir=DIR user executables [EPREFIX/bin]
+ --sbindir=DIR system admin executables [EPREFIX/sbin]
+ --libexecdir=DIR program executables [EPREFIX/libexec]
+ --sysconfdir=DIR read-only single-machine data [PREFIX/etc]
+ --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
+ --localstatedir=DIR modifiable single-machine data [PREFIX/var]
+ --libdir=DIR object code libraries [EPREFIX/lib]
+ --includedir=DIR C header files [PREFIX/include]
+ --oldincludedir=DIR C header files for non-gcc [/usr/include]
+ --datarootdir=DIR read-only arch.-independent data root [PREFIX/share]
+ --datadir=DIR read-only architecture-independent data [DATAROOTDIR]
+ --infodir=DIR info documentation [DATAROOTDIR/info]
+ --localedir=DIR locale-dependent data [DATAROOTDIR/locale]
+ --mandir=DIR man documentation [DATAROOTDIR/man]
+ --docdir=DIR documentation root [DATAROOTDIR/doc/nnlo-bridge]
+ --htmldir=DIR html documentation [DOCDIR]
+ --dvidir=DIR dvi documentation [DOCDIR]
+ --pdfdir=DIR pdf documentation [DOCDIR]
+ --psdir=DIR ps documentation [DOCDIR]
+_ACEOF
+
+ cat <<\_ACEOF
+
+Program names:
+ --program-prefix=PREFIX prepend PREFIX to installed program names
+ --program-suffix=SUFFIX append SUFFIX to installed program names
+ --program-transform-name=PROGRAM run sed PROGRAM on installed program names
+
+System types:
+ --build=BUILD configure for building on BUILD [guessed]
+ --host=HOST cross-compile to build programs to run on HOST [BUILD]
+_ACEOF
+fi
+
+if test -n "$ac_init_help"; then
+ case $ac_init_help in
+ short | recursive ) echo "Configuration of nnlo-bridge 0.0.44:";;
+ esac
+ cat <<\_ACEOF
+
+Optional Features:
+ --disable-option-checking ignore unrecognized --enable/--with options
+ --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
+ --enable-FEATURE[=ARG] include FEATURE [ARG=yes]
+ --enable-silent-rules less verbose build output (undo: "make V=1")
+ --disable-silent-rules verbose build output (undo: "make V=0")
+ --enable-dependency-tracking
+ do not reject slow dependency extractors
+ --disable-dependency-tracking
+ speeds up one-time build
+ --enable-shared[=PKGS] build shared libraries [default=yes]
+ --enable-static[=PKGS] build static libraries [default=yes]
+ --enable-fast-install[=PKGS]
+ optimize for fast installation [default=yes]
+ --disable-libtool-lock avoid locking (might break parallel builds)
+
+Optional Packages:
+ --with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
+ --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
+ --with-pic[=PKGS] try to use only PIC/non-PIC objects [default=use
+ both]
+ --with-aix-soname=aix|svr4|both
+ shared library versioning (aka "SONAME") variant to
+ provide on AIX, [default=aix].
+ --with-gnu-ld assume the C compiler uses GNU ld [default=no]
+ --with-sysroot[=DIR] Search for dependent libraries within DIR (or the
+ compiler's sysroot if not specified).
+
+Some influential environment variables:
+ CC C compiler command
+ CFLAGS C compiler flags
+ LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a
+ nonstandard directory <lib dir>
+ LIBS libraries to pass to the linker, e.g. -l<library>
+ CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I<include dir> if
+ you have headers in a nonstandard directory <include dir>
+ CXX C++ compiler command
+ CXXFLAGS C++ compiler flags
+ LT_SYS_LIBRARY_PATH
+ User-defined run-time library search path.
+ CPP C preprocessor
+ CXXCPP C++ preprocessor
+
+Use these variables to override the choices made by `configure' or to help
+it to find libraries and programs with nonstandard names/locations.
+
+Report bugs to <sutt@cern.ch>.
+nnlo-bridge home page: <http://applgrid.hepforge.org>.
+_ACEOF
+ac_status=$?
+fi
+
+if test "$ac_init_help" = "recursive"; then
+ # If there are subdirs, report their specific --help.
+ for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
+ test -d "$ac_dir" ||
+ { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } ||
+ continue
+ ac_builddir=.
+
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+ ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
+ # A ".." for each directory in $ac_dir_suffix.
+ ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
+ case $ac_top_builddir_sub in
+ "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+ esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
+
+case $srcdir in
+ .) # We are building in place.
+ ac_srcdir=.
+ ac_top_srcdir=$ac_top_builddir_sub
+ ac_abs_top_srcdir=$ac_pwd ;;
+ [\\/]* | ?:[\\/]* ) # Absolute name.
+ ac_srcdir=$srcdir$ac_dir_suffix;
+ ac_top_srcdir=$srcdir
+ ac_abs_top_srcdir=$srcdir ;;
+ *) # Relative name.
+ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+ ac_top_srcdir=$ac_top_build_prefix$srcdir
+ ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+ cd "$ac_dir" || { ac_status=$?; continue; }
+ # Check for guested configure.
+ if test -f "$ac_srcdir/configure.gnu"; then
+ echo &&
+ $SHELL "$ac_srcdir/configure.gnu" --help=recursive
+ elif test -f "$ac_srcdir/configure"; then
+ echo &&
+ $SHELL "$ac_srcdir/configure" --help=recursive
+ else
+ $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
+ fi || ac_status=$?
+ cd "$ac_pwd" || { ac_status=$?; break; }
+ done
+fi
+
+test -n "$ac_init_help" && exit $ac_status
+if $ac_init_version; then
+ cat <<\_ACEOF
+nnlo-bridge configure 0.0.44
+generated by GNU Autoconf 2.69
+
+Copyright (C) 2012 Free Software Foundation, Inc.
+This configure script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it.
+_ACEOF
+ exit
+fi
+
+## ------------------------ ##
+## Autoconf initialization. ##
+## ------------------------ ##
+
+# ac_fn_c_try_compile LINENO
+# --------------------------
+# Try to compile conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_compile ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ rm -f conftest.$ac_objext
+ if { { ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_compile") 2>conftest.err
+ ac_status=$?
+ if test -s conftest.err; then
+ grep -v '^ *+' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ mv -f conftest.er1 conftest.err
+ fi
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then :
+ ac_retval=0
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_retval=1
+fi
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+ as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_compile
+
+# ac_fn_cxx_try_compile LINENO
+# ----------------------------
+# Try to compile conftest.$ac_ext, and return whether this succeeded.
+ac_fn_cxx_try_compile ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ rm -f conftest.$ac_objext
+ if { { ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_compile") 2>conftest.err
+ ac_status=$?
+ if test -s conftest.err; then
+ grep -v '^ *+' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ mv -f conftest.er1 conftest.err
+ fi
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && {
+ test -z "$ac_cxx_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then :
+ ac_retval=0
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_retval=1
+fi
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+ as_fn_set_status $ac_retval
+
+} # ac_fn_cxx_try_compile
+
+# ac_fn_c_try_link LINENO
+# -----------------------
+# Try to link conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_link ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ rm -f conftest.$ac_objext conftest$ac_exeext
+ if { { ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_link") 2>conftest.err
+ ac_status=$?
+ if test -s conftest.err; then
+ grep -v '^ *+' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ mv -f conftest.er1 conftest.err
+ fi
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest$ac_exeext && {
+ test "$cross_compiling" = yes ||
+ test -x conftest$ac_exeext
+ }; then :
+ ac_retval=0
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_retval=1
+fi
+ # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information
+ # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would
+ # interfere with the next link command; also delete a directory that is
+ # left behind by Apple's compiler. We do this before executing the actions.
+ rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+ as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_link
+
+# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES
+# -------------------------------------------------------
+# Tests whether HEADER exists and can be compiled using the include files in
+# INCLUDES, setting the cache variable VAR accordingly.
+ac_fn_c_check_header_compile ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+$4
+#include <$2>
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ eval "$3=yes"
+else
+ eval "$3=no"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_c_check_header_compile
+
+# ac_fn_c_try_cpp LINENO
+# ----------------------
+# Try to preprocess conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_cpp ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ if { { ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err
+ ac_status=$?
+ if test -s conftest.err; then
+ grep -v '^ *+' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ mv -f conftest.er1 conftest.err
+ fi
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } > conftest.i && {
+ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ }; then :
+ ac_retval=0
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_retval=1
+fi
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+ as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_cpp
+
+# ac_fn_c_try_run LINENO
+# ----------------------
+# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes
+# that executables *can* be run.
+ac_fn_c_try_run ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ if { { ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_link") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && { ac_try='./conftest$ac_exeext'
+ { { case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_try") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }; then :
+ ac_retval=0
+else
+ $as_echo "$as_me: program exited with status $ac_status" >&5
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_retval=$ac_status
+fi
+ rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+ as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_run
+
+# ac_fn_c_check_func LINENO FUNC VAR
+# ----------------------------------
+# Tests whether FUNC exists, setting the cache variable VAR accordingly
+ac_fn_c_check_func ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+/* Define $2 to an innocuous variant, in case <limits.h> declares $2.
+ For example, HP-UX 11i <limits.h> declares gettimeofday. */
+#define $2 innocuous_$2
+
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char $2 (); below.
+ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ <limits.h> exists even on freestanding compilers. */
+
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+
+#undef $2
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char $2 ();
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined __stub_$2 || defined __stub___$2
+choke me
+#endif
+
+int
+main ()
+{
+return $2 ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ eval "$3=yes"
+else
+ eval "$3=no"
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_c_check_func
+
+# ac_fn_cxx_try_cpp LINENO
+# ------------------------
+# Try to preprocess conftest.$ac_ext, and return whether this succeeded.
+ac_fn_cxx_try_cpp ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ if { { ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err
+ ac_status=$?
+ if test -s conftest.err; then
+ grep -v '^ *+' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ mv -f conftest.er1 conftest.err
+ fi
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } > conftest.i && {
+ test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" ||
+ test ! -s conftest.err
+ }; then :
+ ac_retval=0
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_retval=1
+fi
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+ as_fn_set_status $ac_retval
+
+} # ac_fn_cxx_try_cpp
+
+# ac_fn_cxx_try_link LINENO
+# -------------------------
+# Try to link conftest.$ac_ext, and return whether this succeeded.
+ac_fn_cxx_try_link ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ rm -f conftest.$ac_objext conftest$ac_exeext
+ if { { ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_link") 2>conftest.err
+ ac_status=$?
+ if test -s conftest.err; then
+ grep -v '^ *+' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ mv -f conftest.er1 conftest.err
+ fi
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && {
+ test -z "$ac_cxx_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest$ac_exeext && {
+ test "$cross_compiling" = yes ||
+ test -x conftest$ac_exeext
+ }; then :
+ ac_retval=0
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_retval=1
+fi
+ # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information
+ # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would
+ # interfere with the next link command; also delete a directory that is
+ # left behind by Apple's compiler. We do this before executing the actions.
+ rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+ as_fn_set_status $ac_retval
+
+} # ac_fn_cxx_try_link
+cat >config.log <<_ACEOF
+This file contains any messages produced by compilers while
+running configure, to aid debugging if configure makes a mistake.
+
+It was created by nnlo-bridge $as_me 0.0.44, which was
+generated by GNU Autoconf 2.69. Invocation command line was
+
+ $ $0 $@
+
+_ACEOF
+exec 5>>config.log
+{
+cat <<_ASUNAME
+## --------- ##
+## Platform. ##
+## --------- ##
+
+hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
+uname -m = `(uname -m) 2>/dev/null || echo unknown`
+uname -r = `(uname -r) 2>/dev/null || echo unknown`
+uname -s = `(uname -s) 2>/dev/null || echo unknown`
+uname -v = `(uname -v) 2>/dev/null || echo unknown`
+
+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
+/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown`
+
+/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown`
+/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown`
+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
+/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown`
+/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown`
+/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown`
+/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown`
+
+_ASUNAME
+
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ $as_echo "PATH: $as_dir"
+ done
+IFS=$as_save_IFS
+
+} >&5
+
+cat >&5 <<_ACEOF
+
+
+## ----------- ##
+## Core tests. ##
+## ----------- ##
+
+_ACEOF
+
+
+# Keep a trace of the command line.
+# Strip out --no-create and --no-recursion so they do not pile up.
+# Strip out --silent because we don't want to record it for future runs.
+# Also quote any args containing shell meta-characters.
+# Make two passes to allow for proper duplicate-argument suppression.
+ac_configure_args=
+ac_configure_args0=
+ac_configure_args1=
+ac_must_keep_next=false
+for ac_pass in 1 2
+do
+ for ac_arg
+ do
+ case $ac_arg in
+ -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+ | -silent | --silent | --silen | --sile | --sil)
+ continue ;;
+ *\'*)
+ ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
+ esac
+ case $ac_pass in
+ 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;;
+ 2)
+ as_fn_append ac_configure_args1 " '$ac_arg'"
+ if test $ac_must_keep_next = true; then
+ ac_must_keep_next=false # Got value, back to normal.
+ else
+ case $ac_arg in
+ *=* | --config-cache | -C | -disable-* | --disable-* \
+ | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
+ | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
+ | -with-* | --with-* | -without-* | --without-* | --x)
+ case "$ac_configure_args0 " in
+ "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
+ esac
+ ;;
+ -* ) ac_must_keep_next=true ;;
+ esac
+ fi
+ as_fn_append ac_configure_args " '$ac_arg'"
+ ;;
+ esac
+ done
+done
+{ ac_configure_args0=; unset ac_configure_args0;}
+{ ac_configure_args1=; unset ac_configure_args1;}
+
+# When interrupted or exit'd, cleanup temporary files, and complete
+# config.log. We remove comments because anyway the quotes in there
+# would cause problems or look ugly.
+# WARNING: Use '\'' to represent an apostrophe within the trap.
+# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
+trap 'exit_status=$?
+ # Save into config.log some information that might help in debugging.
+ {
+ echo
+
+ $as_echo "## ---------------- ##
+## Cache variables. ##
+## ---------------- ##"
+ echo
+ # The following way of writing the cache mishandles newlines in values,
+(
+ for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
+ eval ac_val=\$$ac_var
+ case $ac_val in #(
+ *${as_nl}*)
+ case $ac_var in #(
+ *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
+ esac
+ case $ac_var in #(
+ _ | IFS | as_nl) ;; #(
+ BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
+ *) { eval $ac_var=; unset $ac_var;} ;;
+ esac ;;
+ esac
+ done
+ (set) 2>&1 |
+ case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
+ *${as_nl}ac_space=\ *)
+ sed -n \
+ "s/'\''/'\''\\\\'\'''\''/g;
+ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
+ ;; #(
+ *)
+ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
+ ;;
+ esac |
+ sort
+)
+ echo
+
+ $as_echo "## ----------------- ##
+## Output variables. ##
+## ----------------- ##"
+ echo
+ for ac_var in $ac_subst_vars
+ do
+ eval ac_val=\$$ac_var
+ case $ac_val in
+ *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+ esac
+ $as_echo "$ac_var='\''$ac_val'\''"
+ done | sort
+ echo
+
+ if test -n "$ac_subst_files"; then
+ $as_echo "## ------------------- ##
+## File substitutions. ##
+## ------------------- ##"
+ echo
+ for ac_var in $ac_subst_files
+ do
+ eval ac_val=\$$ac_var
+ case $ac_val in
+ *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+ esac
+ $as_echo "$ac_var='\''$ac_val'\''"
+ done | sort
+ echo
+ fi
+
+ if test -s confdefs.h; then
+ $as_echo "## ----------- ##
+## confdefs.h. ##
+## ----------- ##"
+ echo
+ cat confdefs.h
+ echo
+ fi
+ test "$ac_signal" != 0 &&
+ $as_echo "$as_me: caught signal $ac_signal"
+ $as_echo "$as_me: exit $exit_status"
+ } >&5
+ rm -f core *.core core.conftest.* &&
+ rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
+ exit $exit_status
+' 0
+for ac_signal in 1 2 13 15; do
+ trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal
+done
+ac_signal=0
+
+# confdefs.h avoids OS command line length limits that DEFS can exceed.
+rm -f -r conftest* confdefs.h
+
+$as_echo "/* confdefs.h */" > confdefs.h
+
+# Predefined preprocessor variables.
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_NAME "$PACKAGE_NAME"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_VERSION "$PACKAGE_VERSION"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_STRING "$PACKAGE_STRING"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_URL "$PACKAGE_URL"
+_ACEOF
+
+
+# Let the site file select an alternate cache file if it wants to.
+# Prefer an explicitly selected file to automatically selected ones.
+ac_site_file1=NONE
+ac_site_file2=NONE
+if test -n "$CONFIG_SITE"; then
+ # We do not want a PATH search for config.site.
+ case $CONFIG_SITE in #((
+ -*) ac_site_file1=./$CONFIG_SITE;;
+ */*) ac_site_file1=$CONFIG_SITE;;
+ *) ac_site_file1=./$CONFIG_SITE;;
+ esac
+elif test "x$prefix" != xNONE; then
+ ac_site_file1=$prefix/share/config.site
+ ac_site_file2=$prefix/etc/config.site
+else
+ ac_site_file1=$ac_default_prefix/share/config.site
+ ac_site_file2=$ac_default_prefix/etc/config.site
+fi
+for ac_site_file in "$ac_site_file1" "$ac_site_file2"
+do
+ test "x$ac_site_file" = xNONE && continue
+ if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5
+$as_echo "$as_me: loading site script $ac_site_file" >&6;}
+ sed 's/^/| /' "$ac_site_file" >&5
+ . "$ac_site_file" \
+ || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "failed to load site script $ac_site_file
+See \`config.log' for more details" "$LINENO" 5; }
+ fi
+done
+
+if test -r "$cache_file"; then
+ # Some versions of bash will fail to source /dev/null (special files
+ # actually), so we avoid doing that. DJGPP emulates it as a regular file.
+ if test /dev/null != "$cache_file" && test -f "$cache_file"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5
+$as_echo "$as_me: loading cache $cache_file" >&6;}
+ case $cache_file in
+ [\\/]* | ?:[\\/]* ) . "$cache_file";;
+ *) . "./$cache_file";;
+ esac
+ fi
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5
+$as_echo "$as_me: creating cache $cache_file" >&6;}
+ >$cache_file
+fi
+
+as_fn_append ac_header_list " utime.h"
+# Check that the precious variables saved in the cache have kept the same
+# value.
+ac_cache_corrupted=false
+for ac_var in $ac_precious_vars; do
+ eval ac_old_set=\$ac_cv_env_${ac_var}_set
+ eval ac_new_set=\$ac_env_${ac_var}_set
+ eval ac_old_val=\$ac_cv_env_${ac_var}_value
+ eval ac_new_val=\$ac_env_${ac_var}_value
+ case $ac_old_set,$ac_new_set in
+ set,)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
+ ac_cache_corrupted=: ;;
+ ,set)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
+ ac_cache_corrupted=: ;;
+ ,);;
+ *)
+ if test "x$ac_old_val" != "x$ac_new_val"; then
+ # differences in whitespace do not lead to failure.
+ ac_old_val_w=`echo x $ac_old_val`
+ ac_new_val_w=`echo x $ac_new_val`
+ if test "$ac_old_val_w" != "$ac_new_val_w"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5
+$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
+ ac_cache_corrupted=:
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5
+$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;}
+ eval $ac_var=\$ac_old_val
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5
+$as_echo "$as_me: former value: \`$ac_old_val'" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5
+$as_echo "$as_me: current value: \`$ac_new_val'" >&2;}
+ fi;;
+ esac
+ # Pass precious variables to config.status.
+ if test "$ac_new_set" = set; then
+ case $ac_new_val in
+ *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
+ *) ac_arg=$ac_var=$ac_new_val ;;
+ esac
+ case " $ac_configure_args " in
+ *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy.
+ *) as_fn_append ac_configure_args " '$ac_arg'" ;;
+ esac
+ fi
+done
+if $ac_cache_corrupted; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5
+$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;}
+ as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5
+fi
+## -------------------- ##
+## Main body of script. ##
+## -------------------- ##
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+am__api_version='1.15'
+
+ac_aux_dir=
+for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do
+ if test -f "$ac_dir/install-sh"; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install-sh -c"
+ break
+ elif test -f "$ac_dir/install.sh"; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install.sh -c"
+ break
+ elif test -f "$ac_dir/shtool"; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/shtool install -c"
+ break
+ fi
+done
+if test -z "$ac_aux_dir"; then
+ as_fn_error $? "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5
+fi
+
+# These three variables are undocumented and unsupported,
+# and are intended to be withdrawn in a future Autoconf release.
+# They can cause serious problems if a builder's source tree is in a directory
+# whose full name contains unusual characters.
+ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var.
+ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var.
+ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var.
+
+
+# Find a good install program. We prefer a C program (faster),
+# so one script is as good as another. But avoid the broken or
+# incompatible versions:
+# SysV /etc/install, /usr/sbin/install
+# SunOS /usr/etc/install
+# IRIX /sbin/install
+# AIX /bin/install
+# AmigaOS /C/install, which installs bootblocks on floppy discs
+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
+# AFS /usr/afsws/bin/install, which mishandles nonexistent args
+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+# OS/2's system install, which has a completely different semantic
+# ./install, which can be erroneously created by make from ./install.sh.
+# Reject install programs that cannot install multiple files.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5
+$as_echo_n "checking for a BSD-compatible install... " >&6; }
+if test -z "$INSTALL"; then
+if ${ac_cv_path_install+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ # Account for people who put trailing slashes in PATH elements.
+case $as_dir/ in #((
+ ./ | .// | /[cC]/* | \
+ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
+ ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \
+ /usr/ucb/* ) ;;
+ *)
+ # OSF1 and SCO ODT 3.0 have their own names for install.
+ # Don't use installbsd from OSF since it installs stuff as root
+ # by default.
+ for ac_prog in ginstall scoinst install; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
+ if test $ac_prog = install &&
+ grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+ # AIX install. It has an incompatible calling convention.
+ :
+ elif test $ac_prog = install &&
+ grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+ # program-specific install script used by HP pwplus--don't use.
+ :
+ else
+ rm -rf conftest.one conftest.two conftest.dir
+ echo one > conftest.one
+ echo two > conftest.two
+ mkdir conftest.dir
+ if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" &&
+ test -s conftest.one && test -s conftest.two &&
+ test -s conftest.dir/conftest.one &&
+ test -s conftest.dir/conftest.two
+ then
+ ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
+ break 3
+ fi
+ fi
+ fi
+ done
+ done
+ ;;
+esac
+
+ done
+IFS=$as_save_IFS
+
+rm -rf conftest.one conftest.two conftest.dir
+
+fi
+ if test "${ac_cv_path_install+set}" = set; then
+ INSTALL=$ac_cv_path_install
+ else
+ # As a last resort, use the slow shell script. Don't cache a
+ # value for INSTALL within a source directory, because that will
+ # break other packages using the cache if that directory is
+ # removed, or if the value is a relative name.
+ INSTALL=$ac_install_sh
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5
+$as_echo "$INSTALL" >&6; }
+
+# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
+# It thinks the first close brace ends the variable substitution.
+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
+
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
+
+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5
+$as_echo_n "checking whether build environment is sane... " >&6; }
+# Reject unsafe characters in $srcdir or the absolute working directory
+# name. Accept space and tab only in the latter.
+am_lf='
+'
+case `pwd` in
+ *[\\\"\#\$\&\'\`$am_lf]*)
+ as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;;
+esac
+case $srcdir in
+ *[\\\"\#\$\&\'\`$am_lf\ \ ]*)
+ as_fn_error $? "unsafe srcdir value: '$srcdir'" "$LINENO" 5;;
+esac
+
+# Do 'set' in a subshell so we don't clobber the current shell's
+# arguments. Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+ am_has_slept=no
+ for am_try in 1 2; do
+ echo "timestamp, slept: $am_has_slept" > conftest.file
+ set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
+ if test "$*" = "X"; then
+ # -L didn't work.
+ set X `ls -t "$srcdir/configure" conftest.file`
+ fi
+ if test "$*" != "X $srcdir/configure conftest.file" \
+ && test "$*" != "X conftest.file $srcdir/configure"; then
+
+ # If neither matched, then we have a broken ls. This can happen
+ # if, for instance, CONFIG_SHELL is bash and it inherits a
+ # broken ls alias from the environment. This has actually
+ # happened. Such a system could not be considered "sane".
+ as_fn_error $? "ls -t appears to fail. Make sure there is not a broken
+ alias in your environment" "$LINENO" 5
+ fi
+ if test "$2" = conftest.file || test $am_try -eq 2; then
+ break
+ fi
+ # Just in case.
+ sleep 1
+ am_has_slept=yes
+ done
+ test "$2" = conftest.file
+ )
+then
+ # Ok.
+ :
+else
+ as_fn_error $? "newly created file is older than distributed files!
+Check your system clock" "$LINENO" 5
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+# If we didn't sleep, we still need to ensure time stamps of config.status and
+# generated files are strictly newer.
+am_sleep_pid=
+if grep 'slept: no' conftest.file >/dev/null 2>&1; then
+ ( sleep 1 ) &
+ am_sleep_pid=$!
+fi
+
+rm -f conftest.file
+
+test "$program_prefix" != NONE &&
+ program_transform_name="s&^&$program_prefix&;$program_transform_name"
+# Use a double $ so make ignores it.
+test "$program_suffix" != NONE &&
+ program_transform_name="s&\$&$program_suffix&;$program_transform_name"
+# Double any \ or $.
+# By default was `s,x,x', remove it if useless.
+ac_script='s/[\\$]/&&/g;s/;s,x,x,$//'
+program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"`
+
+# Expand $ac_aux_dir to an absolute path.
+am_aux_dir=`cd "$ac_aux_dir" && pwd`
+
+if test x"${MISSING+set}" != xset; then
+ case $am_aux_dir in
+ *\ * | *\ *)
+ MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
+ *)
+ MISSING="\${SHELL} $am_aux_dir/missing" ;;
+ esac
+fi
+# Use eval to expand $SHELL
+if eval "$MISSING --is-lightweight"; then
+ am_missing_run="$MISSING "
+else
+ am_missing_run=
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: 'missing' script is too old or missing" >&5
+$as_echo "$as_me: WARNING: 'missing' script is too old or missing" >&2;}
+fi
+
+if test x"${install_sh+set}" != xset; then
+ case $am_aux_dir in
+ *\ * | *\ *)
+ install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
+ *)
+ install_sh="\${SHELL} $am_aux_dir/install-sh"
+ esac
+fi
+
+# Installed binaries are usually stripped using 'strip' when the user
+# run "make install-strip". However 'strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the 'STRIP' environment variable to overrule this program.
+if test "$cross_compiling" != no; then
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_STRIP+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$STRIP"; then
+ ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+STRIP=$ac_cv_prog_STRIP
+if test -n "$STRIP"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
+$as_echo "$STRIP" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_STRIP"; then
+ ac_ct_STRIP=$STRIP
+ # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_STRIP+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_STRIP"; then
+ ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_STRIP="strip"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
+if test -n "$ac_ct_STRIP"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5
+$as_echo "$ac_ct_STRIP" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_STRIP" = x; then
+ STRIP=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ STRIP=$ac_ct_STRIP
+ fi
+else
+ STRIP="$ac_cv_prog_STRIP"
+fi
+
+fi
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5
+$as_echo_n "checking for a thread-safe mkdir -p... " >&6; }
+if test -z "$MKDIR_P"; then
+ if ${ac_cv_path_mkdir+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_prog in mkdir gmkdir; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext" || continue
+ case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #(
+ 'mkdir (GNU coreutils) '* | \
+ 'mkdir (coreutils) '* | \
+ 'mkdir (fileutils) '4.1*)
+ ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext
+ break 3;;
+ esac
+ done
+ done
+ done
+IFS=$as_save_IFS
+
+fi
+
+ test -d ./--version && rmdir ./--version
+ if test "${ac_cv_path_mkdir+set}" = set; then
+ MKDIR_P="$ac_cv_path_mkdir -p"
+ else
+ # As a last resort, use the slow shell script. Don't cache a
+ # value for MKDIR_P within a source directory, because that will
+ # break other packages using the cache if that directory is
+ # removed, or if the value is a relative name.
+ MKDIR_P="$ac_install_sh -d"
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5
+$as_echo "$MKDIR_P" >&6; }
+
+for ac_prog in gawk mawk nawk awk
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_AWK+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$AWK"; then
+ ac_cv_prog_AWK="$AWK" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_AWK="$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+AWK=$ac_cv_prog_AWK
+if test -n "$AWK"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5
+$as_echo "$AWK" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$AWK" && break
+done
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5
+$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; }
+set x ${MAKE-make}
+ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
+if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat >conftest.make <<\_ACEOF
+SHELL = /bin/sh
+all:
+ @echo '@@@%%%=$(MAKE)=@@@%%%'
+_ACEOF
+# GNU make sometimes prints "make[1]: Entering ...", which would confuse us.
+case `${MAKE-make} -f conftest.make 2>/dev/null` in
+ *@@@%%%=?*=@@@%%%*)
+ eval ac_cv_prog_make_${ac_make}_set=yes;;
+ *)
+ eval ac_cv_prog_make_${ac_make}_set=no;;
+esac
+rm -f conftest.make
+fi
+if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ SET_MAKE=
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ SET_MAKE="MAKE=${MAKE-make}"
+fi
+
+rm -rf .tst 2>/dev/null
+mkdir .tst 2>/dev/null
+if test -d .tst; then
+ am__leading_dot=.
+else
+ am__leading_dot=_
+fi
+rmdir .tst 2>/dev/null
+
+# Check whether --enable-silent-rules was given.
+if test "${enable_silent_rules+set}" = set; then :
+ enableval=$enable_silent_rules;
+fi
+
+case $enable_silent_rules in # (((
+ yes) AM_DEFAULT_VERBOSITY=0;;
+ no) AM_DEFAULT_VERBOSITY=1;;
+ *) AM_DEFAULT_VERBOSITY=1;;
+esac
+am_make=${MAKE-make}
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5
+$as_echo_n "checking whether $am_make supports nested variables... " >&6; }
+if ${am_cv_make_support_nested_variables+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if $as_echo 'TRUE=$(BAR$(V))
+BAR0=false
+BAR1=true
+V=1
+am__doit:
+ @$(TRUE)
+.PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then
+ am_cv_make_support_nested_variables=yes
+else
+ am_cv_make_support_nested_variables=no
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5
+$as_echo "$am_cv_make_support_nested_variables" >&6; }
+if test $am_cv_make_support_nested_variables = yes; then
+ AM_V='$(V)'
+ AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
+else
+ AM_V=$AM_DEFAULT_VERBOSITY
+ AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY
+fi
+AM_BACKSLASH='\'
+
+if test "`cd $srcdir && pwd`" != "`pwd`"; then
+ # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
+ # is not polluted with repeated "-I."
+ am__isrc=' -I$(srcdir)'
+ # test to see if srcdir already configured
+ if test -f $srcdir/config.status; then
+ as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5
+ fi
+fi
+
+# test whether we have cygpath
+if test -z "$CYGPATH_W"; then
+ if (cygpath --version) >/dev/null 2>/dev/null; then
+ CYGPATH_W='cygpath -w'
+ else
+ CYGPATH_W=echo
+ fi
+fi
+
+
+# Define the identity of the package.
+ PACKAGE='nnlo-bridge'
+ VERSION='0.0.44'
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE "$PACKAGE"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define VERSION "$VERSION"
+_ACEOF
+
+# Some tools Automake needs.
+
+ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"}
+
+
+AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"}
+
+
+AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"}
+
+
+AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"}
+
+
+MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
+
+# For better backward compatibility. To be removed once Automake 1.9.x
+# dies out for good. For more background, see:
+# <http://lists.gnu.org/archive/html/automake/2012-07/msg00001.html>
+# <http://lists.gnu.org/archive/html/automake/2012-07/msg00014.html>
+mkdir_p='$(MKDIR_P)'
+
+# We need awk for the "check" target (and possibly the TAP driver). The
+# system "awk" is bad on some platforms.
+# Always define AMTAR for backward compatibility. Yes, it's still used
+# in the wild :-( We should find a proper way to deprecate it ...
+AMTAR='$${TAR-tar}'
+
+
+# We'll loop over all known methods to create a tar archive until one works.
+_am_tools='gnutar pax cpio none'
+
+am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'
+
+
+
+
+
+
+# POSIX will say in a future version that running "rm -f" with no argument
+# is OK; and we want to be able to make that assumption in our Makefile
+# recipes. So use an aggressive probe to check that the usage we want is
+# actually supported "in the wild" to an acceptable degree.
+# See automake bug#10828.
+# To make any issue more visible, cause the running configure to be aborted
+# by default if the 'rm' program in use doesn't match our expectations; the
+# user can still override this though.
+if rm -f && rm -fr && rm -rf; then : OK; else
+ cat >&2 <<'END'
+Oops!
+
+Your 'rm' program seems unable to run without file operands specified
+on the command line, even when the '-f' option is present. This is contrary
+to the behaviour of most rm programs out there, and not conforming with
+the upcoming POSIX standard: <http://austingroupbugs.net/view.php?id=542>
+
+Please tell bug-automake@gnu.org about your system, including the value
+of your $PATH and any error possibly output before this message. This
+can help us improve future automake versions.
+
+END
+ if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then
+ echo 'Configuration will proceed anyway, since you have set the' >&2
+ echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2
+ echo >&2
+ else
+ cat >&2 <<'END'
+Aborting the configuration process, to ensure you take notice of the issue.
+
+You can download and install GNU coreutils to get an 'rm' implementation
+that behaves properly: <http://www.gnu.org/software/coreutils/>.
+
+If you want to complete the configuration process using your problematic
+'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM
+to "yes", and re-run configure.
+
+END
+ as_fn_error $? "Your 'rm' program is bad, sorry." "$LINENO" 5
+ fi
+fi
+
+ac_config_headers="$ac_config_headers amconfig.h:amconfig.in"
+
+#AC_PROG_FC
+#AC_CHECK_PROGS(FC, [gfortran g77 f77 fort77 f90], no)
+#AC_PROG_FC
+#AC_LANG_PUSH(Fortran)
+#AC_FC_SRCEXT(f90)
+#AC_FC_LIBRARY_LDFLAGS
+#AC_FC_WRAPPERS
+#AC_FC_FREEFORM
+#AC_FC_DUMMY_MAIN
+#AC_LANG_POP(Fortran)
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}gcc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_CC="${ac_tool_prefix}gcc"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_CC"; then
+ ac_ct_CC=$CC
+ # Extract the first word of "gcc", so it can be a program name with args.
+set dummy gcc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_CC+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_CC"; then
+ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_CC="gcc"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
+$as_echo "$ac_ct_CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_CC" = x; then
+ CC=""
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ CC=$ac_ct_CC
+ fi
+else
+ CC="$ac_cv_prog_CC"
+fi
+
+if test -z "$CC"; then
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}cc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_CC="${ac_tool_prefix}cc"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ fi
+fi
+if test -z "$CC"; then
+ # Extract the first word of "cc", so it can be a program name with args.
+set dummy cc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+ ac_prog_rejected=no
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
+ ac_prog_rejected=yes
+ continue
+ fi
+ ac_cv_prog_CC="cc"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+if test $ac_prog_rejected = yes; then
+ # We found a bogon in the path, so make sure we never use it.
+ set dummy $ac_cv_prog_CC
+ shift
+ if test $# != 0; then
+ # We chose a different compiler from the bogus one.
+ # However, it has the same basename, so the bogon will be chosen
+ # first if we set CC to just the basename; use the full file name.
+ shift
+ ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
+ fi
+fi
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$CC"; then
+ if test -n "$ac_tool_prefix"; then
+ for ac_prog in cl.exe
+ do
+ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$CC" && break
+ done
+fi
+if test -z "$CC"; then
+ ac_ct_CC=$CC
+ for ac_prog in cl.exe
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_CC+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_CC"; then
+ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_CC="$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
+$as_echo "$ac_ct_CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$ac_ct_CC" && break
+done
+
+ if test "x$ac_ct_CC" = x; then
+ CC=""
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ CC=$ac_ct_CC
+ fi
+fi
+
+fi
+
+
+test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "no acceptable C compiler found in \$PATH
+See \`config.log' for more details" "$LINENO" 5; }
+
+# Provide some information about the compiler.
+$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5
+set X $ac_compile
+ac_compiler=$2
+for ac_option in --version -v -V -qversion; do
+ { { ac_try="$ac_compiler $ac_option >&5"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_compiler $ac_option >&5") 2>conftest.err
+ ac_status=$?
+ if test -s conftest.err; then
+ sed '10a\
+... rest of stderr output deleted ...
+ 10q' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ fi
+ rm -f conftest.er1 conftest.err
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }
+done
+
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out"
+# Try to create an executable without -o first, disregard a.out.
+# It will help us diagnose broken compilers, and finding out an intuition
+# of exeext.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5
+$as_echo_n "checking whether the C compiler works... " >&6; }
+ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
+
+# The possible output files:
+ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*"
+
+ac_rmfiles=
+for ac_file in $ac_files
+do
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
+ * ) ac_rmfiles="$ac_rmfiles $ac_file";;
+ esac
+done
+rm -f $ac_rmfiles
+
+if { { ac_try="$ac_link_default"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_link_default") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then :
+ # Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
+# So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
+# in a Makefile. We should not override ac_cv_exeext if it was cached,
+# so that the user can short-circuit this test for compilers unknown to
+# Autoconf.
+for ac_file in $ac_files ''
+do
+ test -f "$ac_file" || continue
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj )
+ ;;
+ [ab].out )
+ # We found the default executable, but exeext='' is most
+ # certainly right.
+ break;;
+ *.* )
+ if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no;
+ then :; else
+ ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+ fi
+ # We set ac_cv_exeext here because the later test for it is not
+ # safe: cross compilers may not add the suffix if given an `-o'
+ # argument, so we may need to know it at that point already.
+ # Even if this section looks crufty: it has the advantage of
+ # actually working.
+ break;;
+ * )
+ break;;
+ esac
+done
+test "$ac_cv_exeext" = no && ac_cv_exeext=
+
+else
+ ac_file=''
+fi
+if test -z "$ac_file"; then :
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+$as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error 77 "C compiler cannot create executables
+See \`config.log' for more details" "$LINENO" 5; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5
+$as_echo_n "checking for C compiler default output file name... " >&6; }
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5
+$as_echo "$ac_file" >&6; }
+ac_exeext=$ac_cv_exeext
+
+rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out
+ac_clean_files=$ac_clean_files_save
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5
+$as_echo_n "checking for suffix of executables... " >&6; }
+if { { ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_link") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then :
+ # If both `conftest.exe' and `conftest' are `present' (well, observable)
+# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will
+# work properly (i.e., refer to `conftest.exe'), while it won't with
+# `rm'.
+for ac_file in conftest.exe conftest conftest.*; do
+ test -f "$ac_file" || continue
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
+ *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+ break;;
+ * ) break;;
+ esac
+done
+else
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot compute suffix of executables: cannot compile and link
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+rm -f conftest conftest$ac_cv_exeext
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5
+$as_echo "$ac_cv_exeext" >&6; }
+
+rm -f conftest.$ac_ext
+EXEEXT=$ac_cv_exeext
+ac_exeext=$EXEEXT
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <stdio.h>
+int
+main ()
+{
+FILE *f = fopen ("conftest.out", "w");
+ return ferror (f) || fclose (f) != 0;
+
+ ;
+ return 0;
+}
+_ACEOF
+ac_clean_files="$ac_clean_files conftest.out"
+# Check that the compiler produces executables we can run. If not, either
+# the compiler is broken, or we cross compile.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5
+$as_echo_n "checking whether we are cross compiling... " >&6; }
+if test "$cross_compiling" != yes; then
+ { { ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_link") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }
+ if { ac_try='./conftest$ac_cv_exeext'
+ { { case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_try") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }; then
+ cross_compiling=no
+ else
+ if test "$cross_compiling" = maybe; then
+ cross_compiling=yes
+ else
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot run C compiled programs.
+If you meant to cross compile, use \`--host'.
+See \`config.log' for more details" "$LINENO" 5; }
+ fi
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5
+$as_echo "$cross_compiling" >&6; }
+
+rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out
+ac_clean_files=$ac_clean_files_save
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5
+$as_echo_n "checking for suffix of object files... " >&6; }
+if ${ac_cv_objext+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.o conftest.obj
+if { { ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_compile") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then :
+ for ac_file in conftest.o conftest.obj conftest.*; do
+ test -f "$ac_file" || continue;
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;;
+ *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
+ break;;
+ esac
+done
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot compute suffix of object files: cannot compile
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+rm -f conftest.$ac_cv_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5
+$as_echo "$ac_cv_objext" >&6; }
+OBJEXT=$ac_cv_objext
+ac_objext=$OBJEXT
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5
+$as_echo_n "checking whether we are using the GNU C compiler... " >&6; }
+if ${ac_cv_c_compiler_gnu+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+#ifndef __GNUC__
+ choke me
+#endif
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_compiler_gnu=yes
+else
+ ac_compiler_gnu=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ac_cv_c_compiler_gnu=$ac_compiler_gnu
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5
+$as_echo "$ac_cv_c_compiler_gnu" >&6; }
+if test $ac_compiler_gnu = yes; then
+ GCC=yes
+else
+ GCC=
+fi
+ac_test_CFLAGS=${CFLAGS+set}
+ac_save_CFLAGS=$CFLAGS
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5
+$as_echo_n "checking whether $CC accepts -g... " >&6; }
+if ${ac_cv_prog_cc_g+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_save_c_werror_flag=$ac_c_werror_flag
+ ac_c_werror_flag=yes
+ ac_cv_prog_cc_g=no
+ CFLAGS="-g"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_prog_cc_g=yes
+else
+ CFLAGS=""
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+else
+ ac_c_werror_flag=$ac_save_c_werror_flag
+ CFLAGS="-g"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_prog_cc_g=yes
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ ac_c_werror_flag=$ac_save_c_werror_flag
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5
+$as_echo "$ac_cv_prog_cc_g" >&6; }
+if test "$ac_test_CFLAGS" = set; then
+ CFLAGS=$ac_save_CFLAGS
+elif test $ac_cv_prog_cc_g = yes; then
+ if test "$GCC" = yes; then
+ CFLAGS="-g -O2"
+ else
+ CFLAGS="-g"
+ fi
+else
+ if test "$GCC" = yes; then
+ CFLAGS="-O2"
+ else
+ CFLAGS=
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5
+$as_echo_n "checking for $CC option to accept ISO C89... " >&6; }
+if ${ac_cv_prog_cc_c89+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_cv_prog_cc_c89=no
+ac_save_CC=$CC
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <stdarg.h>
+#include <stdio.h>
+struct stat;
+/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
+struct buf { int x; };
+FILE * (*rcsopen) (struct buf *, struct stat *, int);
+static char *e (p, i)
+ char **p;
+ int i;
+{
+ return p[i];
+}
+static char *f (char * (*g) (char **, int), char **p, ...)
+{
+ char *s;
+ va_list v;
+ va_start (v,p);
+ s = g (p, va_arg (v,int));
+ va_end (v);
+ return s;
+}
+
+/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has
+ function prototypes and stuff, but not '\xHH' hex character constants.
+ These don't provoke an error unfortunately, instead are silently treated
+ as 'x'. The following induces an error, until -std is added to get
+ proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an
+ array size at least. It's necessary to write '\x00'==0 to get something
+ that's true only with -std. */
+int osf4_cc_array ['\x00' == 0 ? 1 : -1];
+
+/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
+ inside strings and character constants. */
+#define FOO(x) 'x'
+int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
+
+int test (int i, double x);
+struct s1 {int (*f) (int a);};
+struct s2 {int (*f) (double a);};
+int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
+int argc;
+char **argv;
+int
+main ()
+{
+return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1];
+ ;
+ return 0;
+}
+_ACEOF
+for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
+ -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
+do
+ CC="$ac_save_CC $ac_arg"
+ if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_prog_cc_c89=$ac_arg
+fi
+rm -f core conftest.err conftest.$ac_objext
+ test "x$ac_cv_prog_cc_c89" != "xno" && break
+done
+rm -f conftest.$ac_ext
+CC=$ac_save_CC
+
+fi
+# AC_CACHE_VAL
+case "x$ac_cv_prog_cc_c89" in
+ x)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5
+$as_echo "none needed" >&6; } ;;
+ xno)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5
+$as_echo "unsupported" >&6; } ;;
+ *)
+ CC="$CC $ac_cv_prog_cc_c89"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5
+$as_echo "$ac_cv_prog_cc_c89" >&6; } ;;
+esac
+if test "x$ac_cv_prog_cc_c89" != xno; then :
+
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC understands -c and -o together" >&5
+$as_echo_n "checking whether $CC understands -c and -o together... " >&6; }
+if ${am_cv_prog_cc_c_o+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+ # Make sure it works both with $CC and with simple cc.
+ # Following AC_PROG_CC_C_O, we do the test twice because some
+ # compilers refuse to overwrite an existing .o file with -o,
+ # though they will create one.
+ am_cv_prog_cc_c_o=yes
+ for am_i in 1 2; do
+ if { echo "$as_me:$LINENO: $CC -c conftest.$ac_ext -o conftest2.$ac_objext" >&5
+ ($CC -c conftest.$ac_ext -o conftest2.$ac_objext) >&5 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } \
+ && test -f conftest2.$ac_objext; then
+ : OK
+ else
+ am_cv_prog_cc_c_o=no
+ break
+ fi
+ done
+ rm -f core conftest*
+ unset am_i
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_prog_cc_c_o" >&5
+$as_echo "$am_cv_prog_cc_c_o" >&6; }
+if test "$am_cv_prog_cc_c_o" != yes; then
+ # Losing compiler, so override with the script.
+ # FIXME: It is wrong to rewrite CC.
+ # But if we don't then we get into trouble of one sort or another.
+ # A longer-term fix would be to have automake use am__CC in this case,
+ # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)"
+ CC="$am_aux_dir/compile $CC"
+fi
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+DEPDIR="${am__leading_dot}deps"
+
+ac_config_commands="$ac_config_commands depfiles"
+
+
+am_make=${MAKE-make}
+cat > confinc << 'END'
+am__doit:
+ @echo this is the am__doit target
+.PHONY: am__doit
+END
+# If we don't find an include directive, just comment out the code.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5
+$as_echo_n "checking for style of include used by $am_make... " >&6; }
+am__include="#"
+am__quote=
+_am_result=none
+# First try GNU make style include.
+echo "include confinc" > confmf
+# Ignore all kinds of additional output from 'make'.
+case `$am_make -s -f confmf 2> /dev/null` in #(
+*the\ am__doit\ target*)
+ am__include=include
+ am__quote=
+ _am_result=GNU
+ ;;
+esac
+# Now try BSD make style include.
+if test "$am__include" = "#"; then
+ echo '.include "confinc"' > confmf
+ case `$am_make -s -f confmf 2> /dev/null` in #(
+ *the\ am__doit\ target*)
+ am__include=.include
+ am__quote="\""
+ _am_result=BSD
+ ;;
+ esac
+fi
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5
+$as_echo "$_am_result" >&6; }
+rm -f confinc confmf
+
+# Check whether --enable-dependency-tracking was given.
+if test "${enable_dependency_tracking+set}" = set; then :
+ enableval=$enable_dependency_tracking;
+fi
+
+if test "x$enable_dependency_tracking" != xno; then
+ am_depcomp="$ac_aux_dir/depcomp"
+ AMDEPBACKSLASH='\'
+ am__nodep='_no'
+fi
+ if test "x$enable_dependency_tracking" != xno; then
+ AMDEP_TRUE=
+ AMDEP_FALSE='#'
+else
+ AMDEP_TRUE='#'
+ AMDEP_FALSE=
+fi
+
+
+
+depcc="$CC" am_compiler_list=
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5
+$as_echo_n "checking dependency style of $depcc... " >&6; }
+if ${am_cv_CC_dependencies_compiler_type+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+ # We make a subdir and do the tests there. Otherwise we can end up
+ # making bogus files that we don't know about and never remove. For
+ # instance it was reported that on HP-UX the gcc test will end up
+ # making a dummy file named 'D' -- because '-MD' means "put the output
+ # in D".
+ rm -rf conftest.dir
+ mkdir conftest.dir
+ # Copy depcomp to subdir because otherwise we won't find it if we're
+ # using a relative directory.
+ cp "$am_depcomp" conftest.dir
+ cd conftest.dir
+ # We will build objects and dependencies in a subdirectory because
+ # it helps to detect inapplicable dependency modes. For instance
+ # both Tru64's cc and ICC support -MD to output dependencies as a
+ # side effect of compilation, but ICC will put the dependencies in
+ # the current directory while Tru64 will put them in the object
+ # directory.
+ mkdir sub
+
+ am_cv_CC_dependencies_compiler_type=none
+ if test "$am_compiler_list" = ""; then
+ am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
+ fi
+ am__universal=false
+ case " $depcc " in #(
+ *\ -arch\ *\ -arch\ *) am__universal=true ;;
+ esac
+
+ for depmode in $am_compiler_list; do
+ # Setup a source with many dependencies, because some compilers
+ # like to wrap large dependency lists on column 80 (with \), and
+ # we should not choose a depcomp mode which is confused by this.
+ #
+ # We need to recreate these files for each test, as the compiler may
+ # overwrite some of them when testing with obscure command lines.
+ # This happens at least with the AIX C compiler.
+ : > sub/conftest.c
+ for i in 1 2 3 4 5 6; do
+ echo '#include "conftst'$i'.h"' >> sub/conftest.c
+ # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with
+ # Solaris 10 /bin/sh.
+ echo '/* dummy */' > sub/conftst$i.h
+ done
+ echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+ # We check with '-c' and '-o' for the sake of the "dashmstdout"
+ # mode. It turns out that the SunPro C++ compiler does not properly
+ # handle '-M -o', and we need to detect this. Also, some Intel
+ # versions had trouble with output in subdirs.
+ am__obj=sub/conftest.${OBJEXT-o}
+ am__minus_obj="-o $am__obj"
+ case $depmode in
+ gcc)
+ # This depmode causes a compiler race in universal mode.
+ test "$am__universal" = false || continue
+ ;;
+ nosideeffect)
+ # After this tag, mechanisms are not by side-effect, so they'll
+ # only be used when explicitly requested.
+ if test "x$enable_dependency_tracking" = xyes; then
+ continue
+ else
+ break
+ fi
+ ;;
+ msvc7 | msvc7msys | msvisualcpp | msvcmsys)
+ # This compiler won't grok '-c -o', but also, the minuso test has
+ # not run yet. These depmodes are late enough in the game, and
+ # so weak that their functioning should not be impacted.
+ am__obj=conftest.${OBJEXT-o}
+ am__minus_obj=
+ ;;
+ none) break ;;
+ esac
+ if depmode=$depmode \
+ source=sub/conftest.c object=$am__obj \
+ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+ $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
+ >/dev/null 2>conftest.err &&
+ grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
+ grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+ grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
+ ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+ # icc doesn't choke on unknown options, it will just issue warnings
+ # or remarks (even with -Werror). So we grep stderr for any message
+ # that says an option was ignored or not supported.
+ # When given -MP, icc 7.0 and 7.1 complain thusly:
+ # icc: Command line warning: ignoring option '-M'; no argument required
+ # The diagnosis changed in icc 8.0:
+ # icc: Command line remark: option '-MP' not supported
+ if (grep 'ignoring option' conftest.err ||
+ grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+ am_cv_CC_dependencies_compiler_type=$depmode
+ break
+ fi
+ fi
+ done
+
+ cd ..
+ rm -rf conftest.dir
+else
+ am_cv_CC_dependencies_compiler_type=none
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5
+$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; }
+CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
+
+ if
+ test "x$enable_dependency_tracking" != xno \
+ && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
+ am__fastdepCC_TRUE=
+ am__fastdepCC_FALSE='#'
+else
+ am__fastdepCC_TRUE='#'
+ am__fastdepCC_FALSE=
+fi
+
+
+ac_ext=cpp
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+if test -z "$CXX"; then
+ if test -n "$CCC"; then
+ CXX=$CCC
+ else
+ if test -n "$ac_tool_prefix"; then
+ for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC
+ do
+ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CXX+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$CXX"; then
+ ac_cv_prog_CXX="$CXX" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_CXX="$ac_tool_prefix$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+CXX=$ac_cv_prog_CXX
+if test -n "$CXX"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CXX" >&5
+$as_echo "$CXX" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$CXX" && break
+ done
+fi
+if test -z "$CXX"; then
+ ac_ct_CXX=$CXX
+ for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_CXX+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_CXX"; then
+ ac_cv_prog_ac_ct_CXX="$ac_ct_CXX" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_CXX="$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CXX=$ac_cv_prog_ac_ct_CXX
+if test -n "$ac_ct_CXX"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CXX" >&5
+$as_echo "$ac_ct_CXX" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$ac_ct_CXX" && break
+done
+
+ if test "x$ac_ct_CXX" = x; then
+ CXX="g++"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ CXX=$ac_ct_CXX
+ fi
+fi
+
+ fi
+fi
+# Provide some information about the compiler.
+$as_echo "$as_me:${as_lineno-$LINENO}: checking for C++ compiler version" >&5
+set X $ac_compile
+ac_compiler=$2
+for ac_option in --version -v -V -qversion; do
+ { { ac_try="$ac_compiler $ac_option >&5"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_compiler $ac_option >&5") 2>conftest.err
+ ac_status=$?
+ if test -s conftest.err; then
+ sed '10a\
+... rest of stderr output deleted ...
+ 10q' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ fi
+ rm -f conftest.er1 conftest.err
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }
+done
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C++ compiler" >&5
+$as_echo_n "checking whether we are using the GNU C++ compiler... " >&6; }
+if ${ac_cv_cxx_compiler_gnu+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+#ifndef __GNUC__
+ choke me
+#endif
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+ ac_compiler_gnu=yes
+else
+ ac_compiler_gnu=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ac_cv_cxx_compiler_gnu=$ac_compiler_gnu
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_cxx_compiler_gnu" >&5
+$as_echo "$ac_cv_cxx_compiler_gnu" >&6; }
+if test $ac_compiler_gnu = yes; then
+ GXX=yes
+else
+ GXX=
+fi
+ac_test_CXXFLAGS=${CXXFLAGS+set}
+ac_save_CXXFLAGS=$CXXFLAGS
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CXX accepts -g" >&5
+$as_echo_n "checking whether $CXX accepts -g... " >&6; }
+if ${ac_cv_prog_cxx_g+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_save_cxx_werror_flag=$ac_cxx_werror_flag
+ ac_cxx_werror_flag=yes
+ ac_cv_prog_cxx_g=no
+ CXXFLAGS="-g"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+ ac_cv_prog_cxx_g=yes
+else
+ CXXFLAGS=""
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+
+else
+ ac_cxx_werror_flag=$ac_save_cxx_werror_flag
+ CXXFLAGS="-g"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+ ac_cv_prog_cxx_g=yes
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ ac_cxx_werror_flag=$ac_save_cxx_werror_flag
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cxx_g" >&5
+$as_echo "$ac_cv_prog_cxx_g" >&6; }
+if test "$ac_test_CXXFLAGS" = set; then
+ CXXFLAGS=$ac_save_CXXFLAGS
+elif test $ac_cv_prog_cxx_g = yes; then
+ if test "$GXX" = yes; then
+ CXXFLAGS="-g -O2"
+ else
+ CXXFLAGS="-g"
+ fi
+else
+ if test "$GXX" = yes; then
+ CXXFLAGS="-O2"
+ else
+ CXXFLAGS=
+ fi
+fi
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+depcc="$CXX" am_compiler_list=
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5
+$as_echo_n "checking dependency style of $depcc... " >&6; }
+if ${am_cv_CXX_dependencies_compiler_type+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+ # We make a subdir and do the tests there. Otherwise we can end up
+ # making bogus files that we don't know about and never remove. For
+ # instance it was reported that on HP-UX the gcc test will end up
+ # making a dummy file named 'D' -- because '-MD' means "put the output
+ # in D".
+ rm -rf conftest.dir
+ mkdir conftest.dir
+ # Copy depcomp to subdir because otherwise we won't find it if we're
+ # using a relative directory.
+ cp "$am_depcomp" conftest.dir
+ cd conftest.dir
+ # We will build objects and dependencies in a subdirectory because
+ # it helps to detect inapplicable dependency modes. For instance
+ # both Tru64's cc and ICC support -MD to output dependencies as a
+ # side effect of compilation, but ICC will put the dependencies in
+ # the current directory while Tru64 will put them in the object
+ # directory.
+ mkdir sub
+
+ am_cv_CXX_dependencies_compiler_type=none
+ if test "$am_compiler_list" = ""; then
+ am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
+ fi
+ am__universal=false
+ case " $depcc " in #(
+ *\ -arch\ *\ -arch\ *) am__universal=true ;;
+ esac
+
+ for depmode in $am_compiler_list; do
+ # Setup a source with many dependencies, because some compilers
+ # like to wrap large dependency lists on column 80 (with \), and
+ # we should not choose a depcomp mode which is confused by this.
+ #
+ # We need to recreate these files for each test, as the compiler may
+ # overwrite some of them when testing with obscure command lines.
+ # This happens at least with the AIX C compiler.
+ : > sub/conftest.c
+ for i in 1 2 3 4 5 6; do
+ echo '#include "conftst'$i'.h"' >> sub/conftest.c
+ # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with
+ # Solaris 10 /bin/sh.
+ echo '/* dummy */' > sub/conftst$i.h
+ done
+ echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+ # We check with '-c' and '-o' for the sake of the "dashmstdout"
+ # mode. It turns out that the SunPro C++ compiler does not properly
+ # handle '-M -o', and we need to detect this. Also, some Intel
+ # versions had trouble with output in subdirs.
+ am__obj=sub/conftest.${OBJEXT-o}
+ am__minus_obj="-o $am__obj"
+ case $depmode in
+ gcc)
+ # This depmode causes a compiler race in universal mode.
+ test "$am__universal" = false || continue
+ ;;
+ nosideeffect)
+ # After this tag, mechanisms are not by side-effect, so they'll
+ # only be used when explicitly requested.
+ if test "x$enable_dependency_tracking" = xyes; then
+ continue
+ else
+ break
+ fi
+ ;;
+ msvc7 | msvc7msys | msvisualcpp | msvcmsys)
+ # This compiler won't grok '-c -o', but also, the minuso test has
+ # not run yet. These depmodes are late enough in the game, and
+ # so weak that their functioning should not be impacted.
+ am__obj=conftest.${OBJEXT-o}
+ am__minus_obj=
+ ;;
+ none) break ;;
+ esac
+ if depmode=$depmode \
+ source=sub/conftest.c object=$am__obj \
+ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+ $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
+ >/dev/null 2>conftest.err &&
+ grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
+ grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+ grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
+ ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+ # icc doesn't choke on unknown options, it will just issue warnings
+ # or remarks (even with -Werror). So we grep stderr for any message
+ # that says an option was ignored or not supported.
+ # When given -MP, icc 7.0 and 7.1 complain thusly:
+ # icc: Command line warning: ignoring option '-M'; no argument required
+ # The diagnosis changed in icc 8.0:
+ # icc: Command line remark: option '-MP' not supported
+ if (grep 'ignoring option' conftest.err ||
+ grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+ am_cv_CXX_dependencies_compiler_type=$depmode
+ break
+ fi
+ fi
+ done
+
+ cd ..
+ rm -rf conftest.dir
+else
+ am_cv_CXX_dependencies_compiler_type=none
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CXX_dependencies_compiler_type" >&5
+$as_echo "$am_cv_CXX_dependencies_compiler_type" >&6; }
+CXXDEPMODE=depmode=$am_cv_CXX_dependencies_compiler_type
+
+ if
+ test "x$enable_dependency_tracking" != xno \
+ && test "$am_cv_CXX_dependencies_compiler_type" = gcc3; then
+ am__fastdepCXX_TRUE=
+ am__fastdepCXX_FALSE='#'
+else
+ am__fastdepCXX_TRUE='#'
+ am__fastdepCXX_FALSE=
+fi
+
+
+case `pwd` in
+ *\ * | *\ *)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5
+$as_echo "$as_me: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&2;} ;;
+esac
+
+
+
+macro_version='2.4.6'
+macro_revision='2.4.6'
+
+
+
+
+
+
+
+
+
+
+
+
+
+ltmain=$ac_aux_dir/ltmain.sh
+
+# Make sure we can run config.sub.
+$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
+ as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5
+$as_echo_n "checking build system type... " >&6; }
+if ${ac_cv_build+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_build_alias=$build_alias
+test "x$ac_build_alias" = x &&
+ ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
+test "x$ac_build_alias" = x &&
+ as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5
+ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
+ as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5
+$as_echo "$ac_cv_build" >&6; }
+case $ac_cv_build in
+*-*-*) ;;
+*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;;
+esac
+build=$ac_cv_build
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_build
+shift
+build_cpu=$1
+build_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+build_os=$*
+IFS=$ac_save_IFS
+case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5
+$as_echo_n "checking host system type... " >&6; }
+if ${ac_cv_host+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test "x$host_alias" = x; then
+ ac_cv_host=$ac_cv_build
+else
+ ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
+ as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5
+$as_echo "$ac_cv_host" >&6; }
+case $ac_cv_host in
+*-*-*) ;;
+*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;;
+esac
+host=$ac_cv_host
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_host
+shift
+host_cpu=$1
+host_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+host_os=$*
+IFS=$ac_save_IFS
+case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
+
+
+# Backslashify metacharacters that are still active within
+# double-quoted strings.
+sed_quote_subst='s/\(["`$\\]\)/\\\1/g'
+
+# Same as above, but do not quote variable references.
+double_quote_subst='s/\(["`\\]\)/\\\1/g'
+
+# Sed substitution to delay expansion of an escaped shell variable in a
+# double_quote_subst'ed string.
+delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
+
+# Sed substitution to delay expansion of an escaped single quote.
+delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
+
+# Sed substitution to avoid accidental globbing in evaled expressions
+no_glob_subst='s/\*/\\\*/g'
+
+ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
+ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to print strings" >&5
+$as_echo_n "checking how to print strings... " >&6; }
+# Test print first, because it will be a builtin if present.
+if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \
+ test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then
+ ECHO='print -r --'
+elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then
+ ECHO='printf %s\n'
+else
+ # Use this function as a fallback that always works.
+ func_fallback_echo ()
+ {
+ eval 'cat <<_LTECHO_EOF
+$1
+_LTECHO_EOF'
+ }
+ ECHO='func_fallback_echo'
+fi
+
+# func_echo_all arg...
+# Invoke $ECHO with all args, space-separated.
+func_echo_all ()
+{
+ $ECHO ""
+}
+
+case $ECHO in
+ printf*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: printf" >&5
+$as_echo "printf" >&6; } ;;
+ print*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: print -r" >&5
+$as_echo "print -r" >&6; } ;;
+ *) { $as_echo "$as_me:${as_lineno-$LINENO}: result: cat" >&5
+$as_echo "cat" >&6; } ;;
+esac
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5
+$as_echo_n "checking for a sed that does not truncate output... " >&6; }
+if ${ac_cv_path_SED+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/
+ for ac_i in 1 2 3 4 5 6 7; do
+ ac_script="$ac_script$as_nl$ac_script"
+ done
+ echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed
+ { ac_script=; unset ac_script;}
+ if test -z "$SED"; then
+ ac_path_SED_found=false
+ # Loop through the user's path and test for each of PROGNAME-LIST
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_prog in sed gsed; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ ac_path_SED="$as_dir/$ac_prog$ac_exec_ext"
+ as_fn_executable_p "$ac_path_SED" || continue
+# Check for GNU ac_path_SED and select it if it is found.
+ # Check for GNU $ac_path_SED
+case `"$ac_path_SED" --version 2>&1` in
+*GNU*)
+ ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;;
+*)
+ ac_count=0
+ $as_echo_n 0123456789 >"conftest.in"
+ while :
+ do
+ cat "conftest.in" "conftest.in" >"conftest.tmp"
+ mv "conftest.tmp" "conftest.in"
+ cp "conftest.in" "conftest.nl"
+ $as_echo '' >> "conftest.nl"
+ "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break
+ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+ as_fn_arith $ac_count + 1 && ac_count=$as_val
+ if test $ac_count -gt ${ac_path_SED_max-0}; then
+ # Best one so far, save it but keep looking for a better one
+ ac_cv_path_SED="$ac_path_SED"
+ ac_path_SED_max=$ac_count
+ fi
+ # 10*(2^10) chars as input seems more than enough
+ test $ac_count -gt 10 && break
+ done
+ rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+ $ac_path_SED_found && break 3
+ done
+ done
+ done
+IFS=$as_save_IFS
+ if test -z "$ac_cv_path_SED"; then
+ as_fn_error $? "no acceptable sed could be found in \$PATH" "$LINENO" 5
+ fi
+else
+ ac_cv_path_SED=$SED
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_SED" >&5
+$as_echo "$ac_cv_path_SED" >&6; }
+ SED="$ac_cv_path_SED"
+ rm -f conftest.sed
+
+test -z "$SED" && SED=sed
+Xsed="$SED -e 1s/^X//"
+
+
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5
+$as_echo_n "checking for grep that handles long lines and -e... " >&6; }
+if ${ac_cv_path_GREP+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -z "$GREP"; then
+ ac_path_GREP_found=false
+ # Loop through the user's path and test for each of PROGNAME-LIST
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_prog in grep ggrep; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
+ as_fn_executable_p "$ac_path_GREP" || continue
+# Check for GNU ac_path_GREP and select it if it is found.
+ # Check for GNU $ac_path_GREP
+case `"$ac_path_GREP" --version 2>&1` in
+*GNU*)
+ ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;;
+*)
+ ac_count=0
+ $as_echo_n 0123456789 >"conftest.in"
+ while :
+ do
+ cat "conftest.in" "conftest.in" >"conftest.tmp"
+ mv "conftest.tmp" "conftest.in"
+ cp "conftest.in" "conftest.nl"
+ $as_echo 'GREP' >> "conftest.nl"
+ "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break
+ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+ as_fn_arith $ac_count + 1 && ac_count=$as_val
+ if test $ac_count -gt ${ac_path_GREP_max-0}; then
+ # Best one so far, save it but keep looking for a better one
+ ac_cv_path_GREP="$ac_path_GREP"
+ ac_path_GREP_max=$ac_count
+ fi
+ # 10*(2^10) chars as input seems more than enough
+ test $ac_count -gt 10 && break
+ done
+ rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+ $ac_path_GREP_found && break 3
+ done
+ done
+ done
+IFS=$as_save_IFS
+ if test -z "$ac_cv_path_GREP"; then
+ as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+ fi
+else
+ ac_cv_path_GREP=$GREP
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5
+$as_echo "$ac_cv_path_GREP" >&6; }
+ GREP="$ac_cv_path_GREP"
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5
+$as_echo_n "checking for egrep... " >&6; }
+if ${ac_cv_path_EGREP+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
+ then ac_cv_path_EGREP="$GREP -E"
+ else
+ if test -z "$EGREP"; then
+ ac_path_EGREP_found=false
+ # Loop through the user's path and test for each of PROGNAME-LIST
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_prog in egrep; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
+ as_fn_executable_p "$ac_path_EGREP" || continue
+# Check for GNU ac_path_EGREP and select it if it is found.
+ # Check for GNU $ac_path_EGREP
+case `"$ac_path_EGREP" --version 2>&1` in
+*GNU*)
+ ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;;
+*)
+ ac_count=0
+ $as_echo_n 0123456789 >"conftest.in"
+ while :
+ do
+ cat "conftest.in" "conftest.in" >"conftest.tmp"
+ mv "conftest.tmp" "conftest.in"
+ cp "conftest.in" "conftest.nl"
+ $as_echo 'EGREP' >> "conftest.nl"
+ "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break
+ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+ as_fn_arith $ac_count + 1 && ac_count=$as_val
+ if test $ac_count -gt ${ac_path_EGREP_max-0}; then
+ # Best one so far, save it but keep looking for a better one
+ ac_cv_path_EGREP="$ac_path_EGREP"
+ ac_path_EGREP_max=$ac_count
+ fi
+ # 10*(2^10) chars as input seems more than enough
+ test $ac_count -gt 10 && break
+ done
+ rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+ $ac_path_EGREP_found && break 3
+ done
+ done
+ done
+IFS=$as_save_IFS
+ if test -z "$ac_cv_path_EGREP"; then
+ as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+ fi
+else
+ ac_cv_path_EGREP=$EGREP
+fi
+
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5
+$as_echo "$ac_cv_path_EGREP" >&6; }
+ EGREP="$ac_cv_path_EGREP"
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for fgrep" >&5
+$as_echo_n "checking for fgrep... " >&6; }
+if ${ac_cv_path_FGREP+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1
+ then ac_cv_path_FGREP="$GREP -F"
+ else
+ if test -z "$FGREP"; then
+ ac_path_FGREP_found=false
+ # Loop through the user's path and test for each of PROGNAME-LIST
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_prog in fgrep; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext"
+ as_fn_executable_p "$ac_path_FGREP" || continue
+# Check for GNU ac_path_FGREP and select it if it is found.
+ # Check for GNU $ac_path_FGREP
+case `"$ac_path_FGREP" --version 2>&1` in
+*GNU*)
+ ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_found=:;;
+*)
+ ac_count=0
+ $as_echo_n 0123456789 >"conftest.in"
+ while :
+ do
+ cat "conftest.in" "conftest.in" >"conftest.tmp"
+ mv "conftest.tmp" "conftest.in"
+ cp "conftest.in" "conftest.nl"
+ $as_echo 'FGREP' >> "conftest.nl"
+ "$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break
+ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+ as_fn_arith $ac_count + 1 && ac_count=$as_val
+ if test $ac_count -gt ${ac_path_FGREP_max-0}; then
+ # Best one so far, save it but keep looking for a better one
+ ac_cv_path_FGREP="$ac_path_FGREP"
+ ac_path_FGREP_max=$ac_count
+ fi
+ # 10*(2^10) chars as input seems more than enough
+ test $ac_count -gt 10 && break
+ done
+ rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+ $ac_path_FGREP_found && break 3
+ done
+ done
+ done
+IFS=$as_save_IFS
+ if test -z "$ac_cv_path_FGREP"; then
+ as_fn_error $? "no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+ fi
+else
+ ac_cv_path_FGREP=$FGREP
+fi
+
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_FGREP" >&5
+$as_echo "$ac_cv_path_FGREP" >&6; }
+ FGREP="$ac_cv_path_FGREP"
+
+
+test -z "$GREP" && GREP=grep
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+# Check whether --with-gnu-ld was given.
+if test "${with_gnu_ld+set}" = set; then :
+ withval=$with_gnu_ld; test no = "$withval" || with_gnu_ld=yes
+else
+ with_gnu_ld=no
+fi
+
+ac_prog=ld
+if test yes = "$GCC"; then
+ # Check if gcc -print-prog-name=ld gives a path.
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5
+$as_echo_n "checking for ld used by $CC... " >&6; }
+ case $host in
+ *-*-mingw*)
+ # gcc leaves a trailing carriage return, which upsets mingw
+ ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+ *)
+ ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+ esac
+ case $ac_prog in
+ # Accept absolute paths.
+ [\\/]* | ?:[\\/]*)
+ re_direlt='/[^/][^/]*/\.\./'
+ # Canonicalize the pathname of ld
+ ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
+ while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
+ ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
+ done
+ test -z "$LD" && LD=$ac_prog
+ ;;
+ "")
+ # If it fails, then pretend we aren't using GCC.
+ ac_prog=ld
+ ;;
+ *)
+ # If it is relative, then search for the first ld in PATH.
+ with_gnu_ld=unknown
+ ;;
+ esac
+elif test yes = "$with_gnu_ld"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5
+$as_echo_n "checking for GNU ld... " >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5
+$as_echo_n "checking for non-GNU ld... " >&6; }
+fi
+if ${lt_cv_path_LD+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -z "$LD"; then
+ lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
+ for ac_dir in $PATH; do
+ IFS=$lt_save_ifs
+ test -z "$ac_dir" && ac_dir=.
+ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+ lt_cv_path_LD=$ac_dir/$ac_prog
+ # Check to see if the program is GNU ld. I'd rather use --version,
+ # but apparently some variants of GNU ld only accept -v.
+ # Break only if it was the GNU/non-GNU ld that we prefer.
+ case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
+ *GNU* | *'with BFD'*)
+ test no != "$with_gnu_ld" && break
+ ;;
+ *)
+ test yes != "$with_gnu_ld" && break
+ ;;
+ esac
+ fi
+ done
+ IFS=$lt_save_ifs
+else
+ lt_cv_path_LD=$LD # Let the user override the test with a path.
+fi
+fi
+
+LD=$lt_cv_path_LD
+if test -n "$LD"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5
+$as_echo "$LD" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5
+$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; }
+if ${lt_cv_prog_gnu_ld+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ # I'd rather use --version here, but apparently some GNU lds only accept -v.
+case `$LD -v 2>&1 </dev/null` in
+*GNU* | *'with BFD'*)
+ lt_cv_prog_gnu_ld=yes
+ ;;
+*)
+ lt_cv_prog_gnu_ld=no
+ ;;
+esac
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_gnu_ld" >&5
+$as_echo "$lt_cv_prog_gnu_ld" >&6; }
+with_gnu_ld=$lt_cv_prog_gnu_ld
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for BSD- or MS-compatible name lister (nm)" >&5
+$as_echo_n "checking for BSD- or MS-compatible name lister (nm)... " >&6; }
+if ${lt_cv_path_NM+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$NM"; then
+ # Let the user override the test.
+ lt_cv_path_NM=$NM
+else
+ lt_nm_to_check=${ac_tool_prefix}nm
+ if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
+ lt_nm_to_check="$lt_nm_to_check nm"
+ fi
+ for lt_tmp_nm in $lt_nm_to_check; do
+ lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
+ for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
+ IFS=$lt_save_ifs
+ test -z "$ac_dir" && ac_dir=.
+ tmp_nm=$ac_dir/$lt_tmp_nm
+ if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext"; then
+ # Check to see if the nm accepts a BSD-compat flag.
+ # Adding the 'sed 1q' prevents false positives on HP-UX, which says:
+ # nm: unknown option "B" ignored
+ # Tru64's nm complains that /dev/null is an invalid object file
+ # MSYS converts /dev/null to NUL, MinGW nm treats NUL as empty
+ case $build_os in
+ mingw*) lt_bad_file=conftest.nm/nofile ;;
+ *) lt_bad_file=/dev/null ;;
+ esac
+ case `"$tmp_nm" -B $lt_bad_file 2>&1 | sed '1q'` in
+ *$lt_bad_file* | *'Invalid file or object type'*)
+ lt_cv_path_NM="$tmp_nm -B"
+ break 2
+ ;;
+ *)
+ case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
+ */dev/null*)
+ lt_cv_path_NM="$tmp_nm -p"
+ break 2
+ ;;
+ *)
+ lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
+ continue # so that we can try to find one that supports BSD flags
+ ;;
+ esac
+ ;;
+ esac
+ fi
+ done
+ IFS=$lt_save_ifs
+ done
+ : ${lt_cv_path_NM=no}
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5
+$as_echo "$lt_cv_path_NM" >&6; }
+if test no != "$lt_cv_path_NM"; then
+ NM=$lt_cv_path_NM
+else
+ # Didn't find any BSD compatible name lister, look for dumpbin.
+ if test -n "$DUMPBIN"; then :
+ # Let the user override the test.
+ else
+ if test -n "$ac_tool_prefix"; then
+ for ac_prog in dumpbin "link -dump"
+ do
+ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_DUMPBIN+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$DUMPBIN"; then
+ ac_cv_prog_DUMPBIN="$DUMPBIN" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+DUMPBIN=$ac_cv_prog_DUMPBIN
+if test -n "$DUMPBIN"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DUMPBIN" >&5
+$as_echo "$DUMPBIN" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$DUMPBIN" && break
+ done
+fi
+if test -z "$DUMPBIN"; then
+ ac_ct_DUMPBIN=$DUMPBIN
+ for ac_prog in dumpbin "link -dump"
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_DUMPBIN+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_DUMPBIN"; then
+ ac_cv_prog_ac_ct_DUMPBIN="$ac_ct_DUMPBIN" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_DUMPBIN="$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_DUMPBIN=$ac_cv_prog_ac_ct_DUMPBIN
+if test -n "$ac_ct_DUMPBIN"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DUMPBIN" >&5
+$as_echo "$ac_ct_DUMPBIN" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$ac_ct_DUMPBIN" && break
+done
+
+ if test "x$ac_ct_DUMPBIN" = x; then
+ DUMPBIN=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ DUMPBIN=$ac_ct_DUMPBIN
+ fi
+fi
+
+ case `$DUMPBIN -symbols -headers /dev/null 2>&1 | sed '1q'` in
+ *COFF*)
+ DUMPBIN="$DUMPBIN -symbols -headers"
+ ;;
+ *)
+ DUMPBIN=:
+ ;;
+ esac
+ fi
+
+ if test : != "$DUMPBIN"; then
+ NM=$DUMPBIN
+ fi
+fi
+test -z "$NM" && NM=nm
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the name lister ($NM) interface" >&5
+$as_echo_n "checking the name lister ($NM) interface... " >&6; }
+if ${lt_cv_nm_interface+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_nm_interface="BSD nm"
+ echo "int some_variable = 0;" > conftest.$ac_ext
+ (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&5)
+ (eval "$ac_compile" 2>conftest.err)
+ cat conftest.err >&5
+ (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&5)
+ (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
+ cat conftest.err >&5
+ (eval echo "\"\$as_me:$LINENO: output\"" >&5)
+ cat conftest.out >&5
+ if $GREP 'External.*some_variable' conftest.out > /dev/null; then
+ lt_cv_nm_interface="MS dumpbin"
+ fi
+ rm -f conftest*
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_nm_interface" >&5
+$as_echo "$lt_cv_nm_interface" >&6; }
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ln -s works" >&5
+$as_echo_n "checking whether ln -s works... " >&6; }
+LN_S=$as_ln_s
+if test "$LN_S" = "ln -s"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, using $LN_S" >&5
+$as_echo "no, using $LN_S" >&6; }
+fi
+
+# find the maximum length of command line arguments
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the maximum length of command line arguments" >&5
+$as_echo_n "checking the maximum length of command line arguments... " >&6; }
+if ${lt_cv_sys_max_cmd_len+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ i=0
+ teststring=ABCD
+
+ case $build_os in
+ msdosdjgpp*)
+ # On DJGPP, this test can blow up pretty badly due to problems in libc
+ # (any single argument exceeding 2000 bytes causes a buffer overrun
+ # during glob expansion). Even if it were fixed, the result of this
+ # check would be larger than it should be.
+ lt_cv_sys_max_cmd_len=12288; # 12K is about right
+ ;;
+
+ gnu*)
+ # Under GNU Hurd, this test is not required because there is
+ # no limit to the length of command line arguments.
+ # Libtool will interpret -1 as no limit whatsoever
+ lt_cv_sys_max_cmd_len=-1;
+ ;;
+
+ cygwin* | mingw* | cegcc*)
+ # On Win9x/ME, this test blows up -- it succeeds, but takes
+ # about 5 minutes as the teststring grows exponentially.
+ # Worse, since 9x/ME are not pre-emptively multitasking,
+ # you end up with a "frozen" computer, even though with patience
+ # the test eventually succeeds (with a max line length of 256k).
+ # Instead, let's just punt: use the minimum linelength reported by
+ # all of the supported platforms: 8192 (on NT/2K/XP).
+ lt_cv_sys_max_cmd_len=8192;
+ ;;
+
+ mint*)
+ # On MiNT this can take a long time and run out of memory.
+ lt_cv_sys_max_cmd_len=8192;
+ ;;
+
+ amigaos*)
+ # On AmigaOS with pdksh, this test takes hours, literally.
+ # So we just punt and use a minimum line length of 8192.
+ lt_cv_sys_max_cmd_len=8192;
+ ;;
+
+ bitrig* | darwin* | dragonfly* | freebsd* | netbsd* | openbsd*)
+ # This has been around since 386BSD, at least. Likely further.
+ if test -x /sbin/sysctl; then
+ lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
+ elif test -x /usr/sbin/sysctl; then
+ lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
+ else
+ lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs
+ fi
+ # And add a safety zone
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+ ;;
+
+ interix*)
+ # We know the value 262144 and hardcode it with a safety zone (like BSD)
+ lt_cv_sys_max_cmd_len=196608
+ ;;
+
+ os2*)
+ # The test takes a long time on OS/2.
+ lt_cv_sys_max_cmd_len=8192
+ ;;
+
+ osf*)
+ # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
+ # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
+ # nice to cause kernel panics so lets avoid the loop below.
+ # First set a reasonable default.
+ lt_cv_sys_max_cmd_len=16384
+ #
+ if test -x /sbin/sysconfig; then
+ case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
+ *1*) lt_cv_sys_max_cmd_len=-1 ;;
+ esac
+ fi
+ ;;
+ sco3.2v5*)
+ lt_cv_sys_max_cmd_len=102400
+ ;;
+ sysv5* | sco5v6* | sysv4.2uw2*)
+ kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
+ if test -n "$kargmax"; then
+ lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[ ]//'`
+ else
+ lt_cv_sys_max_cmd_len=32768
+ fi
+ ;;
+ *)
+ lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
+ if test -n "$lt_cv_sys_max_cmd_len" && \
+ test undefined != "$lt_cv_sys_max_cmd_len"; then
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+ else
+ # Make teststring a little bigger before we do anything with it.
+ # a 1K string should be a reasonable start.
+ for i in 1 2 3 4 5 6 7 8; do
+ teststring=$teststring$teststring
+ done
+ SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
+ # If test is not a shell built-in, we'll probably end up computing a
+ # maximum length that is only half of the actual maximum length, but
+ # we can't tell.
+ while { test X`env echo "$teststring$teststring" 2>/dev/null` \
+ = "X$teststring$teststring"; } >/dev/null 2>&1 &&
+ test 17 != "$i" # 1/2 MB should be enough
+ do
+ i=`expr $i + 1`
+ teststring=$teststring$teststring
+ done
+ # Only check the string length outside the loop.
+ lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1`
+ teststring=
+ # Add a significant safety factor because C++ compilers can tack on
+ # massive amounts of additional arguments before passing them to the
+ # linker. It appears as though 1/2 is a usable value.
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
+ fi
+ ;;
+ esac
+
+fi
+
+if test -n "$lt_cv_sys_max_cmd_len"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sys_max_cmd_len" >&5
+$as_echo "$lt_cv_sys_max_cmd_len" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: none" >&5
+$as_echo "none" >&6; }
+fi
+max_cmd_len=$lt_cv_sys_max_cmd_len
+
+
+
+
+
+
+: ${CP="cp -f"}
+: ${MV="mv -f"}
+: ${RM="rm -f"}
+
+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+ lt_unset=unset
+else
+ lt_unset=false
+fi
+
+
+
+
+
+# test EBCDIC or ASCII
+case `echo X|tr X '\101'` in
+ A) # ASCII based system
+ # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
+ lt_SP2NL='tr \040 \012'
+ lt_NL2SP='tr \015\012 \040\040'
+ ;;
+ *) # EBCDIC based system
+ lt_SP2NL='tr \100 \n'
+ lt_NL2SP='tr \r\n \100\100'
+ ;;
+esac
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to $host format" >&5
+$as_echo_n "checking how to convert $build file names to $host format... " >&6; }
+if ${lt_cv_to_host_file_cmd+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $host in
+ *-*-mingw* )
+ case $build in
+ *-*-mingw* ) # actually msys
+ lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32
+ ;;
+ *-*-cygwin* )
+ lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32
+ ;;
+ * ) # otherwise, assume *nix
+ lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32
+ ;;
+ esac
+ ;;
+ *-*-cygwin* )
+ case $build in
+ *-*-mingw* ) # actually msys
+ lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin
+ ;;
+ *-*-cygwin* )
+ lt_cv_to_host_file_cmd=func_convert_file_noop
+ ;;
+ * ) # otherwise, assume *nix
+ lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin
+ ;;
+ esac
+ ;;
+ * ) # unhandled hosts (and "normal" native builds)
+ lt_cv_to_host_file_cmd=func_convert_file_noop
+ ;;
+esac
+
+fi
+
+to_host_file_cmd=$lt_cv_to_host_file_cmd
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_host_file_cmd" >&5
+$as_echo "$lt_cv_to_host_file_cmd" >&6; }
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to toolchain format" >&5
+$as_echo_n "checking how to convert $build file names to toolchain format... " >&6; }
+if ${lt_cv_to_tool_file_cmd+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ #assume ordinary cross tools, or native build.
+lt_cv_to_tool_file_cmd=func_convert_file_noop
+case $host in
+ *-*-mingw* )
+ case $build in
+ *-*-mingw* ) # actually msys
+ lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32
+ ;;
+ esac
+ ;;
+esac
+
+fi
+
+to_tool_file_cmd=$lt_cv_to_tool_file_cmd
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_tool_file_cmd" >&5
+$as_echo "$lt_cv_to_tool_file_cmd" >&6; }
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $LD option to reload object files" >&5
+$as_echo_n "checking for $LD option to reload object files... " >&6; }
+if ${lt_cv_ld_reload_flag+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_ld_reload_flag='-r'
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_reload_flag" >&5
+$as_echo "$lt_cv_ld_reload_flag" >&6; }
+reload_flag=$lt_cv_ld_reload_flag
+case $reload_flag in
+"" | " "*) ;;
+*) reload_flag=" $reload_flag" ;;
+esac
+reload_cmds='$LD$reload_flag -o $output$reload_objs'
+case $host_os in
+ cygwin* | mingw* | pw32* | cegcc*)
+ if test yes != "$GCC"; then
+ reload_cmds=false
+ fi
+ ;;
+ darwin*)
+ if test yes = "$GCC"; then
+ reload_cmds='$LTCC $LTCFLAGS -nostdlib $wl-r -o $output$reload_objs'
+ else
+ reload_cmds='$LD$reload_flag -o $output$reload_objs'
+ fi
+ ;;
+esac
+
+
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args.
+set dummy ${ac_tool_prefix}objdump; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_OBJDUMP+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$OBJDUMP"; then
+ ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+OBJDUMP=$ac_cv_prog_OBJDUMP
+if test -n "$OBJDUMP"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5
+$as_echo "$OBJDUMP" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_OBJDUMP"; then
+ ac_ct_OBJDUMP=$OBJDUMP
+ # Extract the first word of "objdump", so it can be a program name with args.
+set dummy objdump; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_OBJDUMP+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_OBJDUMP"; then
+ ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_OBJDUMP="objdump"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP
+if test -n "$ac_ct_OBJDUMP"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5
+$as_echo "$ac_ct_OBJDUMP" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_OBJDUMP" = x; then
+ OBJDUMP="false"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ OBJDUMP=$ac_ct_OBJDUMP
+ fi
+else
+ OBJDUMP="$ac_cv_prog_OBJDUMP"
+fi
+
+test -z "$OBJDUMP" && OBJDUMP=objdump
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to recognize dependent libraries" >&5
+$as_echo_n "checking how to recognize dependent libraries... " >&6; }
+if ${lt_cv_deplibs_check_method+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_file_magic_cmd='$MAGIC_CMD'
+lt_cv_file_magic_test_file=
+lt_cv_deplibs_check_method='unknown'
+# Need to set the preceding variable on all platforms that support
+# interlibrary dependencies.
+# 'none' -- dependencies not supported.
+# 'unknown' -- same as none, but documents that we really don't know.
+# 'pass_all' -- all dependencies passed with no checks.
+# 'test_compile' -- check by making test program.
+# 'file_magic [[regex]]' -- check by looking for files in library path
+# that responds to the $file_magic_cmd with a given extended regex.
+# If you have 'file' or equivalent on your system and you're not sure
+# whether 'pass_all' will *always* work, you probably want this one.
+
+case $host_os in
+aix[4-9]*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+beos*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+bsdi[45]*)
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
+ lt_cv_file_magic_cmd='/usr/bin/file -L'
+ lt_cv_file_magic_test_file=/shlib/libc.so
+ ;;
+
+cygwin*)
+ # func_win32_libid is a shell function defined in ltmain.sh
+ lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+ lt_cv_file_magic_cmd='func_win32_libid'
+ ;;
+
+mingw* | pw32*)
+ # Base MSYS/MinGW do not provide the 'file' command needed by
+ # func_win32_libid shell function, so use a weaker test based on 'objdump',
+ # unless we find 'file', for example because we are cross-compiling.
+ if ( file / ) >/dev/null 2>&1; then
+ lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+ lt_cv_file_magic_cmd='func_win32_libid'
+ else
+ # Keep this pattern in sync with the one in func_win32_libid.
+ lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)'
+ lt_cv_file_magic_cmd='$OBJDUMP -f'
+ fi
+ ;;
+
+cegcc*)
+ # use the weaker test based on 'objdump'. See mingw*.
+ lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?'
+ lt_cv_file_magic_cmd='$OBJDUMP -f'
+ ;;
+
+darwin* | rhapsody*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+freebsd* | dragonfly*)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
+ case $host_cpu in
+ i*86 )
+ # Not sure whether the presence of OpenBSD here was a mistake.
+ # Let's accept both of them until this is cleared up.
+ lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library'
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
+ ;;
+ esac
+ else
+ lt_cv_deplibs_check_method=pass_all
+ fi
+ ;;
+
+haiku*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+hpux10.20* | hpux11*)
+ lt_cv_file_magic_cmd=/usr/bin/file
+ case $host_cpu in
+ ia64*)
+ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64'
+ lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
+ ;;
+ hppa*64*)
+ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]'
+ lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
+ ;;
+ *)
+ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9]\.[0-9]) shared library'
+ lt_cv_file_magic_test_file=/usr/lib/libc.sl
+ ;;
+ esac
+ ;;
+
+interix[3-9]*)
+ # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
+ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$'
+ ;;
+
+irix5* | irix6* | nonstopux*)
+ case $LD in
+ *-32|*"-32 ") libmagic=32-bit;;
+ *-n32|*"-n32 ") libmagic=N32;;
+ *-64|*"-64 ") libmagic=64-bit;;
+ *) libmagic=never-match;;
+ esac
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+# This must be glibc/ELF.
+linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+netbsd*)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
+ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
+ else
+ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$'
+ fi
+ ;;
+
+newos6*)
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)'
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=/usr/lib/libnls.so
+ ;;
+
+*nto* | *qnx*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+openbsd* | bitrig*)
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then
+ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$'
+ else
+ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
+ fi
+ ;;
+
+osf3* | osf4* | osf5*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+rdos*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+solaris*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+sysv4 | sysv4.3*)
+ case $host_vendor in
+ motorola)
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
+ ;;
+ ncr)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+ sequent)
+ lt_cv_file_magic_cmd='/bin/file'
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'
+ ;;
+ sni)
+ lt_cv_file_magic_cmd='/bin/file'
+ lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib"
+ lt_cv_file_magic_test_file=/lib/libc.so
+ ;;
+ siemens)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+ pc)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+ esac
+ ;;
+
+tpf*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+os2*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+esac
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_deplibs_check_method" >&5
+$as_echo "$lt_cv_deplibs_check_method" >&6; }
+
+file_magic_glob=
+want_nocaseglob=no
+if test "$build" = "$host"; then
+ case $host_os in
+ mingw* | pw32*)
+ if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then
+ want_nocaseglob=yes
+ else
+ file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[\1]\/[\1]\/g;/g"`
+ fi
+ ;;
+ esac
+fi
+
+file_magic_cmd=$lt_cv_file_magic_cmd
+deplibs_check_method=$lt_cv_deplibs_check_method
+test -z "$deplibs_check_method" && deplibs_check_method=unknown
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
+set dummy ${ac_tool_prefix}dlltool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_DLLTOOL+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$DLLTOOL"; then
+ ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+DLLTOOL=$ac_cv_prog_DLLTOOL
+if test -n "$DLLTOOL"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5
+$as_echo "$DLLTOOL" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_DLLTOOL"; then
+ ac_ct_DLLTOOL=$DLLTOOL
+ # Extract the first word of "dlltool", so it can be a program name with args.
+set dummy dlltool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_DLLTOOL+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_DLLTOOL"; then
+ ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_DLLTOOL="dlltool"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL
+if test -n "$ac_ct_DLLTOOL"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5
+$as_echo "$ac_ct_DLLTOOL" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_DLLTOOL" = x; then
+ DLLTOOL="false"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ DLLTOOL=$ac_ct_DLLTOOL
+ fi
+else
+ DLLTOOL="$ac_cv_prog_DLLTOOL"
+fi
+
+test -z "$DLLTOOL" && DLLTOOL=dlltool
+
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to associate runtime and link libraries" >&5
+$as_echo_n "checking how to associate runtime and link libraries... " >&6; }
+if ${lt_cv_sharedlib_from_linklib_cmd+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_sharedlib_from_linklib_cmd='unknown'
+
+case $host_os in
+cygwin* | mingw* | pw32* | cegcc*)
+ # two different shell functions defined in ltmain.sh;
+ # decide which one to use based on capabilities of $DLLTOOL
+ case `$DLLTOOL --help 2>&1` in
+ *--identify-strict*)
+ lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib
+ ;;
+ *)
+ lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback
+ ;;
+ esac
+ ;;
+*)
+ # fallback: assume linklib IS sharedlib
+ lt_cv_sharedlib_from_linklib_cmd=$ECHO
+ ;;
+esac
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sharedlib_from_linklib_cmd" >&5
+$as_echo "$lt_cv_sharedlib_from_linklib_cmd" >&6; }
+sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd
+test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO
+
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+ for ac_prog in ar
+ do
+ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_AR+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$AR"; then
+ ac_cv_prog_AR="$AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_AR="$ac_tool_prefix$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+AR=$ac_cv_prog_AR
+if test -n "$AR"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5
+$as_echo "$AR" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$AR" && break
+ done
+fi
+if test -z "$AR"; then
+ ac_ct_AR=$AR
+ for ac_prog in ar
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_AR+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_AR"; then
+ ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_AR="$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_AR=$ac_cv_prog_ac_ct_AR
+if test -n "$ac_ct_AR"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5
+$as_echo "$ac_ct_AR" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$ac_ct_AR" && break
+done
+
+ if test "x$ac_ct_AR" = x; then
+ AR="false"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ AR=$ac_ct_AR
+ fi
+fi
+
+: ${AR=ar}
+: ${AR_FLAGS=cru}
+
+
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for archiver @FILE support" >&5
+$as_echo_n "checking for archiver @FILE support... " >&6; }
+if ${lt_cv_ar_at_file+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_ar_at_file=no
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ echo conftest.$ac_objext > conftest.lst
+ lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5
+ (eval $lt_ar_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }
+ if test 0 -eq "$ac_status"; then
+ # Ensure the archiver fails upon bogus file names.
+ rm -f conftest.$ac_objext libconftest.a
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5
+ (eval $lt_ar_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }
+ if test 0 -ne "$ac_status"; then
+ lt_cv_ar_at_file=@
+ fi
+ fi
+ rm -f conftest.* libconftest.a
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ar_at_file" >&5
+$as_echo "$lt_cv_ar_at_file" >&6; }
+
+if test no = "$lt_cv_ar_at_file"; then
+ archiver_list_spec=
+else
+ archiver_list_spec=$lt_cv_ar_at_file
+fi
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_STRIP+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$STRIP"; then
+ ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+STRIP=$ac_cv_prog_STRIP
+if test -n "$STRIP"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
+$as_echo "$STRIP" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_STRIP"; then
+ ac_ct_STRIP=$STRIP
+ # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_STRIP+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_STRIP"; then
+ ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_STRIP="strip"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
+if test -n "$ac_ct_STRIP"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5
+$as_echo "$ac_ct_STRIP" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_STRIP" = x; then
+ STRIP=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ STRIP=$ac_ct_STRIP
+ fi
+else
+ STRIP="$ac_cv_prog_STRIP"
+fi
+
+test -z "$STRIP" && STRIP=:
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ranlib; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_RANLIB+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$RANLIB"; then
+ ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+RANLIB=$ac_cv_prog_RANLIB
+if test -n "$RANLIB"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5
+$as_echo "$RANLIB" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_RANLIB"; then
+ ac_ct_RANLIB=$RANLIB
+ # Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_RANLIB+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_RANLIB"; then
+ ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_RANLIB="ranlib"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
+if test -n "$ac_ct_RANLIB"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5
+$as_echo "$ac_ct_RANLIB" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_RANLIB" = x; then
+ RANLIB=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ RANLIB=$ac_ct_RANLIB
+ fi
+else
+ RANLIB="$ac_cv_prog_RANLIB"
+fi
+
+test -z "$RANLIB" && RANLIB=:
+
+
+
+
+
+
+# Determine commands to create old-style static archives.
+old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
+old_postinstall_cmds='chmod 644 $oldlib'
+old_postuninstall_cmds=
+
+if test -n "$RANLIB"; then
+ case $host_os in
+ bitrig* | openbsd*)
+ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib"
+ ;;
+ *)
+ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$tool_oldlib"
+ ;;
+ esac
+ old_archive_cmds="$old_archive_cmds~\$RANLIB \$tool_oldlib"
+fi
+
+case $host_os in
+ darwin*)
+ lock_old_archive_extraction=yes ;;
+ *)
+ lock_old_archive_extraction=no ;;
+esac
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+
+
+# Check for command to grab the raw symbol name followed by C symbol from nm.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking command to parse $NM output from $compiler object" >&5
+$as_echo_n "checking command to parse $NM output from $compiler object... " >&6; }
+if ${lt_cv_sys_global_symbol_pipe+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+
+# These are sane defaults that work on at least a few old systems.
+# [They come from Ultrix. What could be older than Ultrix?!! ;)]
+
+# Character class describing NM global symbol codes.
+symcode='[BCDEGRST]'
+
+# Regexp to match symbols that can be accessed directly from C.
+sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
+
+# Define system-specific variables.
+case $host_os in
+aix*)
+ symcode='[BCDT]'
+ ;;
+cygwin* | mingw* | pw32* | cegcc*)
+ symcode='[ABCDGISTW]'
+ ;;
+hpux*)
+ if test ia64 = "$host_cpu"; then
+ symcode='[ABCDEGRST]'
+ fi
+ ;;
+irix* | nonstopux*)
+ symcode='[BCDEGRST]'
+ ;;
+osf*)
+ symcode='[BCDEGQRST]'
+ ;;
+solaris*)
+ symcode='[BDRT]'
+ ;;
+sco3.2v5*)
+ symcode='[DT]'
+ ;;
+sysv4.2uw2*)
+ symcode='[DT]'
+ ;;
+sysv5* | sco5v6* | unixware* | OpenUNIX*)
+ symcode='[ABDT]'
+ ;;
+sysv4)
+ symcode='[DFNSTU]'
+ ;;
+esac
+
+# If we're using GNU nm, then use its standard symbol codes.
+case `$NM -V 2>&1` in
+*GNU* | *'with BFD'*)
+ symcode='[ABCDGIRSTW]' ;;
+esac
+
+if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+ # Gets list of data symbols to import.
+ lt_cv_sys_global_symbol_to_import="sed -n -e 's/^I .* \(.*\)$/\1/p'"
+ # Adjust the below global symbol transforms to fixup imported variables.
+ lt_cdecl_hook=" -e 's/^I .* \(.*\)$/extern __declspec(dllimport) char \1;/p'"
+ lt_c_name_hook=" -e 's/^I .* \(.*\)$/ {\"\1\", (void *) 0},/p'"
+ lt_c_name_lib_hook="\
+ -e 's/^I .* \(lib.*\)$/ {\"\1\", (void *) 0},/p'\
+ -e 's/^I .* \(.*\)$/ {\"lib\1\", (void *) 0},/p'"
+else
+ # Disable hooks by default.
+ lt_cv_sys_global_symbol_to_import=
+ lt_cdecl_hook=
+ lt_c_name_hook=
+ lt_c_name_lib_hook=
+fi
+
+# Transform an extracted symbol line into a proper C declaration.
+# Some systems (esp. on ia64) link data and code symbols differently,
+# so use this general approach.
+lt_cv_sys_global_symbol_to_cdecl="sed -n"\
+$lt_cdecl_hook\
+" -e 's/^T .* \(.*\)$/extern int \1();/p'"\
+" -e 's/^$symcode$symcode* .* \(.*\)$/extern char \1;/p'"
+
+# Transform an extracted symbol line into symbol name and symbol address
+lt_cv_sys_global_symbol_to_c_name_address="sed -n"\
+$lt_c_name_hook\
+" -e 's/^: \(.*\) .*$/ {\"\1\", (void *) 0},/p'"\
+" -e 's/^$symcode$symcode* .* \(.*\)$/ {\"\1\", (void *) \&\1},/p'"
+
+# Transform an extracted symbol line into symbol name with lib prefix and
+# symbol address.
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n"\
+$lt_c_name_lib_hook\
+" -e 's/^: \(.*\) .*$/ {\"\1\", (void *) 0},/p'"\
+" -e 's/^$symcode$symcode* .* \(lib.*\)$/ {\"\1\", (void *) \&\1},/p'"\
+" -e 's/^$symcode$symcode* .* \(.*\)$/ {\"lib\1\", (void *) \&\1},/p'"
+
+# Handle CRLF in mingw tool chain
+opt_cr=
+case $build_os in
+mingw*)
+ opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp
+ ;;
+esac
+
+# Try without a prefix underscore, then with it.
+for ac_symprfx in "" "_"; do
+
+ # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
+ symxfrm="\\1 $ac_symprfx\\2 \\2"
+
+ # Write the raw and C identifiers.
+ if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+ # Fake it for dumpbin and say T for any non-static function,
+ # D for any global variable and I for any imported variable.
+ # Also find C++ and __fastcall symbols from MSVC++,
+ # which start with @ or ?.
+ lt_cv_sys_global_symbol_pipe="$AWK '"\
+" {last_section=section; section=\$ 3};"\
+" /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\
+" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\
+" /^ *Symbol name *: /{split(\$ 0,sn,\":\"); si=substr(sn[2],2)};"\
+" /^ *Type *: code/{print \"T\",si,substr(si,length(prfx))};"\
+" /^ *Type *: data/{print \"I\",si,substr(si,length(prfx))};"\
+" \$ 0!~/External *\|/{next};"\
+" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\
+" {if(hide[section]) next};"\
+" {f=\"D\"}; \$ 0~/\(\).*\|/{f=\"T\"};"\
+" {split(\$ 0,a,/\||\r/); split(a[2],s)};"\
+" s[1]~/^[@?]/{print f,s[1],s[1]; next};"\
+" s[1]~prfx {split(s[1],t,\"@\"); print f,t[1],substr(t[1],length(prfx))}"\
+" ' prfx=^$ac_symprfx"
+ else
+ lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
+ fi
+ lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'"
+
+ # Check to see that the pipe works correctly.
+ pipe_works=no
+
+ rm -f conftest*
+ cat > conftest.$ac_ext <<_LT_EOF
+#ifdef __cplusplus
+extern "C" {
+#endif
+char nm_test_var;
+void nm_test_func(void);
+void nm_test_func(void){}
+#ifdef __cplusplus
+}
+#endif
+int main(){nm_test_var='a';nm_test_func();return(0);}
+_LT_EOF
+
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then
+ # Now try to grab the symbols.
+ nlist=conftest.nm
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist\""; } >&5
+ (eval $NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && test -s "$nlist"; then
+ # Try sorting and uniquifying the output.
+ if sort "$nlist" | uniq > "$nlist"T; then
+ mv -f "$nlist"T "$nlist"
+ else
+ rm -f "$nlist"T
+ fi
+
+ # Make sure that we snagged all the symbols we need.
+ if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
+ if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
+ cat <<_LT_EOF > conftest.$ac_ext
+/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */
+#if defined _WIN32 || defined __CYGWIN__ || defined _WIN32_WCE
+/* DATA imports from DLLs on WIN32 can't be const, because runtime
+ relocations are performed -- see ld's documentation on pseudo-relocs. */
+# define LT_DLSYM_CONST
+#elif defined __osf__
+/* This system does not cope well with relocations in const data. */
+# define LT_DLSYM_CONST
+#else
+# define LT_DLSYM_CONST const
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+_LT_EOF
+ # Now generate the symbol file.
+ eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext'
+
+ cat <<_LT_EOF >> conftest.$ac_ext
+
+/* The mapping between symbol names and symbols. */
+LT_DLSYM_CONST struct {
+ const char *name;
+ void *address;
+}
+lt__PROGRAM__LTX_preloaded_symbols[] =
+{
+ { "@PROGRAM@", (void *) 0 },
+_LT_EOF
+ $SED "s/^$symcode$symcode* .* \(.*\)$/ {\"\1\", (void *) \&\1},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
+ cat <<\_LT_EOF >> conftest.$ac_ext
+ {0, (void *) 0}
+};
+
+/* This works around a problem in FreeBSD linker */
+#ifdef FREEBSD_WORKAROUND
+static const void *lt_preloaded_setup() {
+ return lt__PROGRAM__LTX_preloaded_symbols;
+}
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+_LT_EOF
+ # Now try linking the two files.
+ mv conftest.$ac_objext conftstm.$ac_objext
+ lt_globsym_save_LIBS=$LIBS
+ lt_globsym_save_CFLAGS=$CFLAGS
+ LIBS=conftstm.$ac_objext
+ CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag"
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && test -s conftest$ac_exeext; then
+ pipe_works=yes
+ fi
+ LIBS=$lt_globsym_save_LIBS
+ CFLAGS=$lt_globsym_save_CFLAGS
+ else
+ echo "cannot find nm_test_func in $nlist" >&5
+ fi
+ else
+ echo "cannot find nm_test_var in $nlist" >&5
+ fi
+ else
+ echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5
+ fi
+ else
+ echo "$progname: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ fi
+ rm -rf conftest* conftst*
+
+ # Do not use the global_symbol_pipe unless it works.
+ if test yes = "$pipe_works"; then
+ break
+ else
+ lt_cv_sys_global_symbol_pipe=
+ fi
+done
+
+fi
+
+if test -z "$lt_cv_sys_global_symbol_pipe"; then
+ lt_cv_sys_global_symbol_to_cdecl=
+fi
+if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: failed" >&5
+$as_echo "failed" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5
+$as_echo "ok" >&6; }
+fi
+
+# Response file support.
+if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+ nm_file_list_spec='@'
+elif $NM --help 2>/dev/null | grep '[@]FILE' >/dev/null; then
+ nm_file_list_spec='@'
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for sysroot" >&5
+$as_echo_n "checking for sysroot... " >&6; }
+
+# Check whether --with-sysroot was given.
+if test "${with_sysroot+set}" = set; then :
+ withval=$with_sysroot;
+else
+ with_sysroot=no
+fi
+
+
+lt_sysroot=
+case $with_sysroot in #(
+ yes)
+ if test yes = "$GCC"; then
+ lt_sysroot=`$CC --print-sysroot 2>/dev/null`
+ fi
+ ;; #(
+ /*)
+ lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"`
+ ;; #(
+ no|'')
+ ;; #(
+ *)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_sysroot" >&5
+$as_echo "$with_sysroot" >&6; }
+ as_fn_error $? "The sysroot must be an absolute path." "$LINENO" 5
+ ;;
+esac
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${lt_sysroot:-no}" >&5
+$as_echo "${lt_sysroot:-no}" >&6; }
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a working dd" >&5
+$as_echo_n "checking for a working dd... " >&6; }
+if ${ac_cv_path_lt_DD+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ printf 0123456789abcdef0123456789abcdef >conftest.i
+cat conftest.i conftest.i >conftest2.i
+: ${lt_DD:=$DD}
+if test -z "$lt_DD"; then
+ ac_path_lt_DD_found=false
+ # Loop through the user's path and test for each of PROGNAME-LIST
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_prog in dd; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ ac_path_lt_DD="$as_dir/$ac_prog$ac_exec_ext"
+ as_fn_executable_p "$ac_path_lt_DD" || continue
+if "$ac_path_lt_DD" bs=32 count=1 <conftest2.i >conftest.out 2>/dev/null; then
+ cmp -s conftest.i conftest.out \
+ && ac_cv_path_lt_DD="$ac_path_lt_DD" ac_path_lt_DD_found=:
+fi
+ $ac_path_lt_DD_found && break 3
+ done
+ done
+ done
+IFS=$as_save_IFS
+ if test -z "$ac_cv_path_lt_DD"; then
+ :
+ fi
+else
+ ac_cv_path_lt_DD=$lt_DD
+fi
+
+rm -f conftest.i conftest2.i conftest.out
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_lt_DD" >&5
+$as_echo "$ac_cv_path_lt_DD" >&6; }
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to truncate binary pipes" >&5
+$as_echo_n "checking how to truncate binary pipes... " >&6; }
+if ${lt_cv_truncate_bin+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ printf 0123456789abcdef0123456789abcdef >conftest.i
+cat conftest.i conftest.i >conftest2.i
+lt_cv_truncate_bin=
+if "$ac_cv_path_lt_DD" bs=32 count=1 <conftest2.i >conftest.out 2>/dev/null; then
+ cmp -s conftest.i conftest.out \
+ && lt_cv_truncate_bin="$ac_cv_path_lt_DD bs=4096 count=1"
+fi
+rm -f conftest.i conftest2.i conftest.out
+test -z "$lt_cv_truncate_bin" && lt_cv_truncate_bin="$SED -e 4q"
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_truncate_bin" >&5
+$as_echo "$lt_cv_truncate_bin" >&6; }
+
+
+
+
+
+
+
+# Calculate cc_basename. Skip known compiler wrappers and cross-prefix.
+func_cc_basename ()
+{
+ for cc_temp in $*""; do
+ case $cc_temp in
+ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+ \-*) ;;
+ *) break;;
+ esac
+ done
+ func_cc_basename_result=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+}
+
+# Check whether --enable-libtool-lock was given.
+if test "${enable_libtool_lock+set}" = set; then :
+ enableval=$enable_libtool_lock;
+fi
+
+test no = "$enable_libtool_lock" || enable_libtool_lock=yes
+
+# Some flags need to be propagated to the compiler or linker for good
+# libtool support.
+case $host in
+ia64-*-hpux*)
+ # Find out what ABI is being produced by ac_compile, and set mode
+ # options accordingly.
+ echo 'int i;' > conftest.$ac_ext
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then
+ case `/usr/bin/file conftest.$ac_objext` in
+ *ELF-32*)
+ HPUX_IA64_MODE=32
+ ;;
+ *ELF-64*)
+ HPUX_IA64_MODE=64
+ ;;
+ esac
+ fi
+ rm -rf conftest*
+ ;;
+*-*-irix6*)
+ # Find out what ABI is being produced by ac_compile, and set linker
+ # options accordingly.
+ echo '#line '$LINENO' "configure"' > conftest.$ac_ext
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then
+ if test yes = "$lt_cv_prog_gnu_ld"; then
+ case `/usr/bin/file conftest.$ac_objext` in
+ *32-bit*)
+ LD="${LD-ld} -melf32bsmip"
+ ;;
+ *N32*)
+ LD="${LD-ld} -melf32bmipn32"
+ ;;
+ *64-bit*)
+ LD="${LD-ld} -melf64bmip"
+ ;;
+ esac
+ else
+ case `/usr/bin/file conftest.$ac_objext` in
+ *32-bit*)
+ LD="${LD-ld} -32"
+ ;;
+ *N32*)
+ LD="${LD-ld} -n32"
+ ;;
+ *64-bit*)
+ LD="${LD-ld} -64"
+ ;;
+ esac
+ fi
+ fi
+ rm -rf conftest*
+ ;;
+
+mips64*-*linux*)
+ # Find out what ABI is being produced by ac_compile, and set linker
+ # options accordingly.
+ echo '#line '$LINENO' "configure"' > conftest.$ac_ext
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then
+ emul=elf
+ case `/usr/bin/file conftest.$ac_objext` in
+ *32-bit*)
+ emul="${emul}32"
+ ;;
+ *64-bit*)
+ emul="${emul}64"
+ ;;
+ esac
+ case `/usr/bin/file conftest.$ac_objext` in
+ *MSB*)
+ emul="${emul}btsmip"
+ ;;
+ *LSB*)
+ emul="${emul}ltsmip"
+ ;;
+ esac
+ case `/usr/bin/file conftest.$ac_objext` in
+ *N32*)
+ emul="${emul}n32"
+ ;;
+ esac
+ LD="${LD-ld} -m $emul"
+ fi
+ rm -rf conftest*
+ ;;
+
+x86_64-*kfreebsd*-gnu|x86_64-*linux*|powerpc*-*linux*| \
+s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
+ # Find out what ABI is being produced by ac_compile, and set linker
+ # options accordingly. Note that the listed cases only cover the
+ # situations where additional linker options are needed (such as when
+ # doing 32-bit compilation for a host where ld defaults to 64-bit, or
+ # vice versa); the common cases where no linker options are needed do
+ # not appear in the list.
+ echo 'int i;' > conftest.$ac_ext
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then
+ case `/usr/bin/file conftest.o` in
+ *32-bit*)
+ case $host in
+ x86_64-*kfreebsd*-gnu)
+ LD="${LD-ld} -m elf_i386_fbsd"
+ ;;
+ x86_64-*linux*)
+ case `/usr/bin/file conftest.o` in
+ *x86-64*)
+ LD="${LD-ld} -m elf32_x86_64"
+ ;;
+ *)
+ LD="${LD-ld} -m elf_i386"
+ ;;
+ esac
+ ;;
+ powerpc64le-*linux*)
+ LD="${LD-ld} -m elf32lppclinux"
+ ;;
+ powerpc64-*linux*)
+ LD="${LD-ld} -m elf32ppclinux"
+ ;;
+ s390x-*linux*)
+ LD="${LD-ld} -m elf_s390"
+ ;;
+ sparc64-*linux*)
+ LD="${LD-ld} -m elf32_sparc"
+ ;;
+ esac
+ ;;
+ *64-bit*)
+ case $host in
+ x86_64-*kfreebsd*-gnu)
+ LD="${LD-ld} -m elf_x86_64_fbsd"
+ ;;
+ x86_64-*linux*)
+ LD="${LD-ld} -m elf_x86_64"
+ ;;
+ powerpcle-*linux*)
+ LD="${LD-ld} -m elf64lppc"
+ ;;
+ powerpc-*linux*)
+ LD="${LD-ld} -m elf64ppc"
+ ;;
+ s390*-*linux*|s390*-*tpf*)
+ LD="${LD-ld} -m elf64_s390"
+ ;;
+ sparc*-*linux*)
+ LD="${LD-ld} -m elf64_sparc"
+ ;;
+ esac
+ ;;
+ esac
+ fi
+ rm -rf conftest*
+ ;;
+
+*-*-sco3.2v5*)
+ # On SCO OpenServer 5, we need -belf to get full-featured binaries.
+ SAVE_CFLAGS=$CFLAGS
+ CFLAGS="$CFLAGS -belf"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler needs -belf" >&5
+$as_echo_n "checking whether the C compiler needs -belf... " >&6; }
+if ${lt_cv_cc_needs_belf+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ lt_cv_cc_needs_belf=yes
+else
+ lt_cv_cc_needs_belf=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_cc_needs_belf" >&5
+$as_echo "$lt_cv_cc_needs_belf" >&6; }
+ if test yes != "$lt_cv_cc_needs_belf"; then
+ # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
+ CFLAGS=$SAVE_CFLAGS
+ fi
+ ;;
+*-*solaris*)
+ # Find out what ABI is being produced by ac_compile, and set linker
+ # options accordingly.
+ echo 'int i;' > conftest.$ac_ext
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then
+ case `/usr/bin/file conftest.o` in
+ *64-bit*)
+ case $lt_cv_prog_gnu_ld in
+ yes*)
+ case $host in
+ i?86-*-solaris*|x86_64-*-solaris*)
+ LD="${LD-ld} -m elf_x86_64"
+ ;;
+ sparc*-*-solaris*)
+ LD="${LD-ld} -m elf64_sparc"
+ ;;
+ esac
+ # GNU ld 2.21 introduced _sol2 emulations. Use them if available.
+ if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then
+ LD=${LD-ld}_sol2
+ fi
+ ;;
+ *)
+ if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
+ LD="${LD-ld} -64"
+ fi
+ ;;
+ esac
+ ;;
+ esac
+ fi
+ rm -rf conftest*
+ ;;
+esac
+
+need_locks=$enable_libtool_lock
+
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}mt", so it can be a program name with args.
+set dummy ${ac_tool_prefix}mt; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_MANIFEST_TOOL+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$MANIFEST_TOOL"; then
+ ac_cv_prog_MANIFEST_TOOL="$MANIFEST_TOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_MANIFEST_TOOL="${ac_tool_prefix}mt"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+MANIFEST_TOOL=$ac_cv_prog_MANIFEST_TOOL
+if test -n "$MANIFEST_TOOL"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MANIFEST_TOOL" >&5
+$as_echo "$MANIFEST_TOOL" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_MANIFEST_TOOL"; then
+ ac_ct_MANIFEST_TOOL=$MANIFEST_TOOL
+ # Extract the first word of "mt", so it can be a program name with args.
+set dummy mt; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_MANIFEST_TOOL+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_MANIFEST_TOOL"; then
+ ac_cv_prog_ac_ct_MANIFEST_TOOL="$ac_ct_MANIFEST_TOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_MANIFEST_TOOL="mt"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_MANIFEST_TOOL=$ac_cv_prog_ac_ct_MANIFEST_TOOL
+if test -n "$ac_ct_MANIFEST_TOOL"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_MANIFEST_TOOL" >&5
+$as_echo "$ac_ct_MANIFEST_TOOL" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_MANIFEST_TOOL" = x; then
+ MANIFEST_TOOL=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ MANIFEST_TOOL=$ac_ct_MANIFEST_TOOL
+ fi
+else
+ MANIFEST_TOOL="$ac_cv_prog_MANIFEST_TOOL"
+fi
+
+test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $MANIFEST_TOOL is a manifest tool" >&5
+$as_echo_n "checking if $MANIFEST_TOOL is a manifest tool... " >&6; }
+if ${lt_cv_path_mainfest_tool+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_path_mainfest_tool=no
+ echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&5
+ $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out
+ cat conftest.err >&5
+ if $GREP 'Manifest Tool' conftest.out > /dev/null; then
+ lt_cv_path_mainfest_tool=yes
+ fi
+ rm -f conftest*
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_mainfest_tool" >&5
+$as_echo "$lt_cv_path_mainfest_tool" >&6; }
+if test yes != "$lt_cv_path_mainfest_tool"; then
+ MANIFEST_TOOL=:
+fi
+
+
+
+
+
+
+ case $host_os in
+ rhapsody* | darwin*)
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args.
+set dummy ${ac_tool_prefix}dsymutil; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_DSYMUTIL+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$DSYMUTIL"; then
+ ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+DSYMUTIL=$ac_cv_prog_DSYMUTIL
+if test -n "$DSYMUTIL"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DSYMUTIL" >&5
+$as_echo "$DSYMUTIL" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_DSYMUTIL"; then
+ ac_ct_DSYMUTIL=$DSYMUTIL
+ # Extract the first word of "dsymutil", so it can be a program name with args.
+set dummy dsymutil; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_DSYMUTIL+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_DSYMUTIL"; then
+ ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_DSYMUTIL="dsymutil"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL
+if test -n "$ac_ct_DSYMUTIL"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DSYMUTIL" >&5
+$as_echo "$ac_ct_DSYMUTIL" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_DSYMUTIL" = x; then
+ DSYMUTIL=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ DSYMUTIL=$ac_ct_DSYMUTIL
+ fi
+else
+ DSYMUTIL="$ac_cv_prog_DSYMUTIL"
+fi
+
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args.
+set dummy ${ac_tool_prefix}nmedit; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_NMEDIT+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$NMEDIT"; then
+ ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+NMEDIT=$ac_cv_prog_NMEDIT
+if test -n "$NMEDIT"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NMEDIT" >&5
+$as_echo "$NMEDIT" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_NMEDIT"; then
+ ac_ct_NMEDIT=$NMEDIT
+ # Extract the first word of "nmedit", so it can be a program name with args.
+set dummy nmedit; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_NMEDIT+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_NMEDIT"; then
+ ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_NMEDIT="nmedit"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT
+if test -n "$ac_ct_NMEDIT"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_NMEDIT" >&5
+$as_echo "$ac_ct_NMEDIT" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_NMEDIT" = x; then
+ NMEDIT=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ NMEDIT=$ac_ct_NMEDIT
+ fi
+else
+ NMEDIT="$ac_cv_prog_NMEDIT"
+fi
+
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}lipo", so it can be a program name with args.
+set dummy ${ac_tool_prefix}lipo; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_LIPO+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$LIPO"; then
+ ac_cv_prog_LIPO="$LIPO" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_LIPO="${ac_tool_prefix}lipo"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+LIPO=$ac_cv_prog_LIPO
+if test -n "$LIPO"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIPO" >&5
+$as_echo "$LIPO" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_LIPO"; then
+ ac_ct_LIPO=$LIPO
+ # Extract the first word of "lipo", so it can be a program name with args.
+set dummy lipo; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_LIPO+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_LIPO"; then
+ ac_cv_prog_ac_ct_LIPO="$ac_ct_LIPO" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_LIPO="lipo"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_LIPO=$ac_cv_prog_ac_ct_LIPO
+if test -n "$ac_ct_LIPO"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_LIPO" >&5
+$as_echo "$ac_ct_LIPO" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_LIPO" = x; then
+ LIPO=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ LIPO=$ac_ct_LIPO
+ fi
+else
+ LIPO="$ac_cv_prog_LIPO"
+fi
+
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}otool", so it can be a program name with args.
+set dummy ${ac_tool_prefix}otool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_OTOOL+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$OTOOL"; then
+ ac_cv_prog_OTOOL="$OTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_OTOOL="${ac_tool_prefix}otool"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+OTOOL=$ac_cv_prog_OTOOL
+if test -n "$OTOOL"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL" >&5
+$as_echo "$OTOOL" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_OTOOL"; then
+ ac_ct_OTOOL=$OTOOL
+ # Extract the first word of "otool", so it can be a program name with args.
+set dummy otool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_OTOOL+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_OTOOL"; then
+ ac_cv_prog_ac_ct_OTOOL="$ac_ct_OTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_OTOOL="otool"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_OTOOL=$ac_cv_prog_ac_ct_OTOOL
+if test -n "$ac_ct_OTOOL"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL" >&5
+$as_echo "$ac_ct_OTOOL" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_OTOOL" = x; then
+ OTOOL=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ OTOOL=$ac_ct_OTOOL
+ fi
+else
+ OTOOL="$ac_cv_prog_OTOOL"
+fi
+
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}otool64", so it can be a program name with args.
+set dummy ${ac_tool_prefix}otool64; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_OTOOL64+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$OTOOL64"; then
+ ac_cv_prog_OTOOL64="$OTOOL64" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+OTOOL64=$ac_cv_prog_OTOOL64
+if test -n "$OTOOL64"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL64" >&5
+$as_echo "$OTOOL64" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_OTOOL64"; then
+ ac_ct_OTOOL64=$OTOOL64
+ # Extract the first word of "otool64", so it can be a program name with args.
+set dummy otool64; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_OTOOL64+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_OTOOL64"; then
+ ac_cv_prog_ac_ct_OTOOL64="$ac_ct_OTOOL64" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_OTOOL64="otool64"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_OTOOL64=$ac_cv_prog_ac_ct_OTOOL64
+if test -n "$ac_ct_OTOOL64"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL64" >&5
+$as_echo "$ac_ct_OTOOL64" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_OTOOL64" = x; then
+ OTOOL64=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ OTOOL64=$ac_ct_OTOOL64
+ fi
+else
+ OTOOL64="$ac_cv_prog_OTOOL64"
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -single_module linker flag" >&5
+$as_echo_n "checking for -single_module linker flag... " >&6; }
+if ${lt_cv_apple_cc_single_mod+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_apple_cc_single_mod=no
+ if test -z "$LT_MULTI_MODULE"; then
+ # By default we will add the -single_module flag. You can override
+ # by either setting the environment variable LT_MULTI_MODULE
+ # non-empty at configure time, or by adding -multi_module to the
+ # link flags.
+ rm -rf libconftest.dylib*
+ echo "int foo(void){return 1;}" > conftest.c
+ echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+-dynamiclib -Wl,-single_module conftest.c" >&5
+ $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+ -dynamiclib -Wl,-single_module conftest.c 2>conftest.err
+ _lt_result=$?
+ # If there is a non-empty error log, and "single_module"
+ # appears in it, assume the flag caused a linker warning
+ if test -s conftest.err && $GREP single_module conftest.err; then
+ cat conftest.err >&5
+ # Otherwise, if the output was created with a 0 exit code from
+ # the compiler, it worked.
+ elif test -f libconftest.dylib && test 0 = "$_lt_result"; then
+ lt_cv_apple_cc_single_mod=yes
+ else
+ cat conftest.err >&5
+ fi
+ rm -rf libconftest.dylib*
+ rm -f conftest.*
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_apple_cc_single_mod" >&5
+$as_echo "$lt_cv_apple_cc_single_mod" >&6; }
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -exported_symbols_list linker flag" >&5
+$as_echo_n "checking for -exported_symbols_list linker flag... " >&6; }
+if ${lt_cv_ld_exported_symbols_list+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_ld_exported_symbols_list=no
+ save_LDFLAGS=$LDFLAGS
+ echo "_main" > conftest.sym
+ LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ lt_cv_ld_exported_symbols_list=yes
+else
+ lt_cv_ld_exported_symbols_list=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ LDFLAGS=$save_LDFLAGS
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_exported_symbols_list" >&5
+$as_echo "$lt_cv_ld_exported_symbols_list" >&6; }
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -force_load linker flag" >&5
+$as_echo_n "checking for -force_load linker flag... " >&6; }
+if ${lt_cv_ld_force_load+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_ld_force_load=no
+ cat > conftest.c << _LT_EOF
+int forced_loaded() { return 2;}
+_LT_EOF
+ echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&5
+ $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&5
+ echo "$AR cru libconftest.a conftest.o" >&5
+ $AR cru libconftest.a conftest.o 2>&5
+ echo "$RANLIB libconftest.a" >&5
+ $RANLIB libconftest.a 2>&5
+ cat > conftest.c << _LT_EOF
+int main() { return 0;}
+_LT_EOF
+ echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&5
+ $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err
+ _lt_result=$?
+ if test -s conftest.err && $GREP force_load conftest.err; then
+ cat conftest.err >&5
+ elif test -f conftest && test 0 = "$_lt_result" && $GREP forced_load conftest >/dev/null 2>&1; then
+ lt_cv_ld_force_load=yes
+ else
+ cat conftest.err >&5
+ fi
+ rm -f conftest.err libconftest.a conftest conftest.c
+ rm -rf conftest.dSYM
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_force_load" >&5
+$as_echo "$lt_cv_ld_force_load" >&6; }
+ case $host_os in
+ rhapsody* | darwin1.[012])
+ _lt_dar_allow_undefined='$wl-undefined ${wl}suppress' ;;
+ darwin1.*)
+ _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;;
+ darwin*) # darwin 5.x on
+ # if running on 10.5 or later, the deployment target defaults
+ # to the OS version, if on x86, and 10.4, the deployment
+ # target defaults to 10.4. Don't you love it?
+ case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
+ 10.0,*86*-darwin8*|10.0,*-darwin[91]*)
+ _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;;
+ 10.[012][,.]*)
+ _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;;
+ 10.*)
+ _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;;
+ esac
+ ;;
+ esac
+ if test yes = "$lt_cv_apple_cc_single_mod"; then
+ _lt_dar_single_mod='$single_module'
+ fi
+ if test yes = "$lt_cv_ld_exported_symbols_list"; then
+ _lt_dar_export_syms=' $wl-exported_symbols_list,$output_objdir/$libname-symbols.expsym'
+ else
+ _lt_dar_export_syms='~$NMEDIT -s $output_objdir/$libname-symbols.expsym $lib'
+ fi
+ if test : != "$DSYMUTIL" && test no = "$lt_cv_ld_force_load"; then
+ _lt_dsymutil='~$DSYMUTIL $lib || :'
+ else
+ _lt_dsymutil=
+ fi
+ ;;
+ esac
+
+# func_munge_path_list VARIABLE PATH
+# -----------------------------------
+# VARIABLE is name of variable containing _space_ separated list of
+# directories to be munged by the contents of PATH, which is string
+# having a format:
+# "DIR[:DIR]:"
+# string "DIR[ DIR]" will be prepended to VARIABLE
+# ":DIR[:DIR]"
+# string "DIR[ DIR]" will be appended to VARIABLE
+# "DIRP[:DIRP]::[DIRA:]DIRA"
+# string "DIRP[ DIRP]" will be prepended to VARIABLE and string
+# "DIRA[ DIRA]" will be appended to VARIABLE
+# "DIR[:DIR]"
+# VARIABLE will be replaced by "DIR[ DIR]"
+func_munge_path_list ()
+{
+ case x$2 in
+ x)
+ ;;
+ *:)
+ eval $1=\"`$ECHO $2 | $SED 's/:/ /g'` \$$1\"
+ ;;
+ x:*)
+ eval $1=\"\$$1 `$ECHO $2 | $SED 's/:/ /g'`\"
+ ;;
+ *::*)
+ eval $1=\"\$$1\ `$ECHO $2 | $SED -e 's/.*:://' -e 's/:/ /g'`\"
+ eval $1=\"`$ECHO $2 | $SED -e 's/::.*//' -e 's/:/ /g'`\ \$$1\"
+ ;;
+ *)
+ eval $1=\"`$ECHO $2 | $SED 's/:/ /g'`\"
+ ;;
+ esac
+}
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5
+$as_echo_n "checking how to run the C preprocessor... " >&6; }
+# On Suns, sometimes $CPP names a directory.
+if test -n "$CPP" && test -d "$CPP"; then
+ CPP=
+fi
+if test -z "$CPP"; then
+ if ${ac_cv_prog_CPP+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ # Double quotes because CPP needs to be expanded
+ for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
+ do
+ ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
+do
+ # Use a header file that comes with gcc, so configuring glibc
+ # with a fresh cross-compiler works.
+ # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ # <limits.h> exists even on freestanding compilers.
+ # On the NeXT, cc -E runs the code through the compiler's parser,
+ # not just through cpp. "Syntax error" is here to catch this case.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+ Syntax error
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+
+else
+ # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+ # OK, works on sane cases. Now check whether nonexistent headers
+ # can be detected and how.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <ac_nonexistent.h>
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+ # Broken: success on invalid input.
+continue
+else
+ # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.i conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+ break
+fi
+
+ done
+ ac_cv_prog_CPP=$CPP
+
+fi
+ CPP=$ac_cv_prog_CPP
+else
+ ac_cv_prog_CPP=$CPP
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5
+$as_echo "$CPP" >&6; }
+ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
+do
+ # Use a header file that comes with gcc, so configuring glibc
+ # with a fresh cross-compiler works.
+ # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ # <limits.h> exists even on freestanding compilers.
+ # On the NeXT, cc -E runs the code through the compiler's parser,
+ # not just through cpp. "Syntax error" is here to catch this case.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+ Syntax error
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+
+else
+ # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+ # OK, works on sane cases. Now check whether nonexistent headers
+ # can be detected and how.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <ac_nonexistent.h>
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+ # Broken: success on invalid input.
+continue
+else
+ # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.i conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+
+else
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "C preprocessor \"$CPP\" fails sanity check
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5
+$as_echo_n "checking for ANSI C header files... " >&6; }
+if ${ac_cv_header_stdc+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <stdlib.h>
+#include <stdarg.h>
+#include <string.h>
+#include <float.h>
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_header_stdc=yes
+else
+ ac_cv_header_stdc=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+if test $ac_cv_header_stdc = yes; then
+ # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <string.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ $EGREP "memchr" >/dev/null 2>&1; then :
+
+else
+ ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+ # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <stdlib.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ $EGREP "free" >/dev/null 2>&1; then :
+
+else
+ ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+ # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
+ if test "$cross_compiling" = yes; then :
+ :
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <ctype.h>
+#include <stdlib.h>
+#if ((' ' & 0x0FF) == 0x020)
+# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
+# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
+#else
+# define ISLOWER(c) \
+ (('a' <= (c) && (c) <= 'i') \
+ || ('j' <= (c) && (c) <= 'r') \
+ || ('s' <= (c) && (c) <= 'z'))
+# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
+#endif
+
+#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
+int
+main ()
+{
+ int i;
+ for (i = 0; i < 256; i++)
+ if (XOR (islower (i), ISLOWER (i))
+ || toupper (i) != TOUPPER (i))
+ return 2;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+
+else
+ ac_cv_header_stdc=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+ conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5
+$as_echo "$ac_cv_header_stdc" >&6; }
+if test $ac_cv_header_stdc = yes; then
+
+$as_echo "#define STDC_HEADERS 1" >>confdefs.h
+
+fi
+
+# On IRIX 5.3, sys/types and inttypes.h are conflicting.
+for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
+ inttypes.h stdint.h unistd.h
+do :
+ as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
+ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default
+"
+if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
+ cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+
+for ac_header in dlfcn.h
+do :
+ ac_fn_c_check_header_compile "$LINENO" "dlfcn.h" "ac_cv_header_dlfcn_h" "$ac_includes_default
+"
+if test "x$ac_cv_header_dlfcn_h" = xyes; then :
+ cat >>confdefs.h <<_ACEOF
+#define HAVE_DLFCN_H 1
+_ACEOF
+
+fi
+
+done
+
+
+
+
+func_stripname_cnf ()
+{
+ case $2 in
+ .*) func_stripname_result=`$ECHO "$3" | $SED "s%^$1%%; s%\\\\$2\$%%"`;;
+ *) func_stripname_result=`$ECHO "$3" | $SED "s%^$1%%; s%$2\$%%"`;;
+ esac
+} # func_stripname_cnf
+
+
+
+
+
+# Set options
+
+
+
+ enable_dlopen=no
+
+
+ enable_win32_dll=no
+
+
+ # Check whether --enable-shared was given.
+if test "${enable_shared+set}" = set; then :
+ enableval=$enable_shared; p=${PACKAGE-default}
+ case $enableval in
+ yes) enable_shared=yes ;;
+ no) enable_shared=no ;;
+ *)
+ enable_shared=no
+ # Look at the argument we got. We use all the common list separators.
+ lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
+ for pkg in $enableval; do
+ IFS=$lt_save_ifs
+ if test "X$pkg" = "X$p"; then
+ enable_shared=yes
+ fi
+ done
+ IFS=$lt_save_ifs
+ ;;
+ esac
+else
+ enable_shared=yes
+fi
+
+
+
+
+
+
+
+
+
+ # Check whether --enable-static was given.
+if test "${enable_static+set}" = set; then :
+ enableval=$enable_static; p=${PACKAGE-default}
+ case $enableval in
+ yes) enable_static=yes ;;
+ no) enable_static=no ;;
+ *)
+ enable_static=no
+ # Look at the argument we got. We use all the common list separators.
+ lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
+ for pkg in $enableval; do
+ IFS=$lt_save_ifs
+ if test "X$pkg" = "X$p"; then
+ enable_static=yes
+ fi
+ done
+ IFS=$lt_save_ifs
+ ;;
+ esac
+else
+ enable_static=yes
+fi
+
+
+
+
+
+
+
+
+
+
+# Check whether --with-pic was given.
+if test "${with_pic+set}" = set; then :
+ withval=$with_pic; lt_p=${PACKAGE-default}
+ case $withval in
+ yes|no) pic_mode=$withval ;;
+ *)
+ pic_mode=default
+ # Look at the argument we got. We use all the common list separators.
+ lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
+ for lt_pkg in $withval; do
+ IFS=$lt_save_ifs
+ if test "X$lt_pkg" = "X$lt_p"; then
+ pic_mode=yes
+ fi
+ done
+ IFS=$lt_save_ifs
+ ;;
+ esac
+else
+ pic_mode=default
+fi
+
+
+
+
+
+
+
+
+ # Check whether --enable-fast-install was given.
+if test "${enable_fast_install+set}" = set; then :
+ enableval=$enable_fast_install; p=${PACKAGE-default}
+ case $enableval in
+ yes) enable_fast_install=yes ;;
+ no) enable_fast_install=no ;;
+ *)
+ enable_fast_install=no
+ # Look at the argument we got. We use all the common list separators.
+ lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
+ for pkg in $enableval; do
+ IFS=$lt_save_ifs
+ if test "X$pkg" = "X$p"; then
+ enable_fast_install=yes
+ fi
+ done
+ IFS=$lt_save_ifs
+ ;;
+ esac
+else
+ enable_fast_install=yes
+fi
+
+
+
+
+
+
+
+
+ shared_archive_member_spec=
+case $host,$enable_shared in
+power*-*-aix[5-9]*,yes)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking which variant of shared library versioning to provide" >&5
+$as_echo_n "checking which variant of shared library versioning to provide... " >&6; }
+
+# Check whether --with-aix-soname was given.
+if test "${with_aix_soname+set}" = set; then :
+ withval=$with_aix_soname; case $withval in
+ aix|svr4|both)
+ ;;
+ *)
+ as_fn_error $? "Unknown argument to --with-aix-soname" "$LINENO" 5
+ ;;
+ esac
+ lt_cv_with_aix_soname=$with_aix_soname
+else
+ if ${lt_cv_with_aix_soname+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_with_aix_soname=aix
+fi
+
+ with_aix_soname=$lt_cv_with_aix_soname
+fi
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_aix_soname" >&5
+$as_echo "$with_aix_soname" >&6; }
+ if test aix != "$with_aix_soname"; then
+ # For the AIX way of multilib, we name the shared archive member
+ # based on the bitwidth used, traditionally 'shr.o' or 'shr_64.o',
+ # and 'shr.imp' or 'shr_64.imp', respectively, for the Import File.
+ # Even when GNU compilers ignore OBJECT_MODE but need '-maix64' flag,
+ # the AIX toolchain works better with OBJECT_MODE set (default 32).
+ if test 64 = "${OBJECT_MODE-32}"; then
+ shared_archive_member_spec=shr_64
+ else
+ shared_archive_member_spec=shr
+ fi
+ fi
+ ;;
+*)
+ with_aix_soname=aix
+ ;;
+esac
+
+
+
+
+
+
+
+
+
+
+# This can be used to rebuild libtool when needed
+LIBTOOL_DEPS=$ltmain
+
+# Always use our own libtool.
+LIBTOOL='$(SHELL) $(top_builddir)/libtool'
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+test -z "$LN_S" && LN_S="ln -s"
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+if test -n "${ZSH_VERSION+set}"; then
+ setopt NO_GLOB_SUBST
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for objdir" >&5
+$as_echo_n "checking for objdir... " >&6; }
+if ${lt_cv_objdir+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ rm -f .libs 2>/dev/null
+mkdir .libs 2>/dev/null
+if test -d .libs; then
+ lt_cv_objdir=.libs
+else
+ # MS-DOS does not allow filenames that begin with a dot.
+ lt_cv_objdir=_libs
+fi
+rmdir .libs 2>/dev/null
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_objdir" >&5
+$as_echo "$lt_cv_objdir" >&6; }
+objdir=$lt_cv_objdir
+
+
+
+
+
+cat >>confdefs.h <<_ACEOF
+#define LT_OBJDIR "$lt_cv_objdir/"
+_ACEOF
+
+
+
+
+case $host_os in
+aix3*)
+ # AIX sometimes has problems with the GCC collect2 program. For some
+ # reason, if we set the COLLECT_NAMES environment variable, the problems
+ # vanish in a puff of smoke.
+ if test set != "${COLLECT_NAMES+set}"; then
+ COLLECT_NAMES=
+ export COLLECT_NAMES
+ fi
+ ;;
+esac
+
+# Global variables:
+ofile=libtool
+can_build_shared=yes
+
+# All known linkers require a '.a' archive for static linking (except MSVC,
+# which needs '.lib').
+libext=a
+
+with_gnu_ld=$lt_cv_prog_gnu_ld
+
+old_CC=$CC
+old_CFLAGS=$CFLAGS
+
+# Set sane defaults for various variables
+test -z "$CC" && CC=cc
+test -z "$LTCC" && LTCC=$CC
+test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
+test -z "$LD" && LD=ld
+test -z "$ac_objext" && ac_objext=o
+
+func_cc_basename $compiler
+cc_basename=$func_cc_basename_result
+
+
+# Only perform the check for file, if the check method requires it
+test -z "$MAGIC_CMD" && MAGIC_CMD=file
+case $deplibs_check_method in
+file_magic*)
+ if test "$file_magic_cmd" = '$MAGIC_CMD'; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ac_tool_prefix}file" >&5
+$as_echo_n "checking for ${ac_tool_prefix}file... " >&6; }
+if ${lt_cv_path_MAGIC_CMD+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $MAGIC_CMD in
+[\\/*] | ?:[\\/]*)
+ lt_cv_path_MAGIC_CMD=$MAGIC_CMD # Let the user override the test with a path.
+ ;;
+*)
+ lt_save_MAGIC_CMD=$MAGIC_CMD
+ lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
+ ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
+ for ac_dir in $ac_dummy; do
+ IFS=$lt_save_ifs
+ test -z "$ac_dir" && ac_dir=.
+ if test -f "$ac_dir/${ac_tool_prefix}file"; then
+ lt_cv_path_MAGIC_CMD=$ac_dir/"${ac_tool_prefix}file"
+ if test -n "$file_magic_test_file"; then
+ case $deplibs_check_method in
+ "file_magic "*)
+ file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
+ MAGIC_CMD=$lt_cv_path_MAGIC_CMD
+ if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+ $EGREP "$file_magic_regex" > /dev/null; then
+ :
+ else
+ cat <<_LT_EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such. This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem. Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+_LT_EOF
+ fi ;;
+ esac
+ fi
+ break
+ fi
+ done
+ IFS=$lt_save_ifs
+ MAGIC_CMD=$lt_save_MAGIC_CMD
+ ;;
+esac
+fi
+
+MAGIC_CMD=$lt_cv_path_MAGIC_CMD
+if test -n "$MAGIC_CMD"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5
+$as_echo "$MAGIC_CMD" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+
+
+
+if test -z "$lt_cv_path_MAGIC_CMD"; then
+ if test -n "$ac_tool_prefix"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for file" >&5
+$as_echo_n "checking for file... " >&6; }
+if ${lt_cv_path_MAGIC_CMD+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $MAGIC_CMD in
+[\\/*] | ?:[\\/]*)
+ lt_cv_path_MAGIC_CMD=$MAGIC_CMD # Let the user override the test with a path.
+ ;;
+*)
+ lt_save_MAGIC_CMD=$MAGIC_CMD
+ lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
+ ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
+ for ac_dir in $ac_dummy; do
+ IFS=$lt_save_ifs
+ test -z "$ac_dir" && ac_dir=.
+ if test -f "$ac_dir/file"; then
+ lt_cv_path_MAGIC_CMD=$ac_dir/"file"
+ if test -n "$file_magic_test_file"; then
+ case $deplibs_check_method in
+ "file_magic "*)
+ file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
+ MAGIC_CMD=$lt_cv_path_MAGIC_CMD
+ if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+ $EGREP "$file_magic_regex" > /dev/null; then
+ :
+ else
+ cat <<_LT_EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such. This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem. Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+_LT_EOF
+ fi ;;
+ esac
+ fi
+ break
+ fi
+ done
+ IFS=$lt_save_ifs
+ MAGIC_CMD=$lt_save_MAGIC_CMD
+ ;;
+esac
+fi
+
+MAGIC_CMD=$lt_cv_path_MAGIC_CMD
+if test -n "$MAGIC_CMD"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5
+$as_echo "$MAGIC_CMD" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ else
+ MAGIC_CMD=:
+ fi
+fi
+
+ fi
+ ;;
+esac
+
+# Use C for the default configuration in the libtool script
+
+lt_save_CC=$CC
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+# Source file extension for C test sources.
+ac_ext=c
+
+# Object file extension for compiled C test sources.
+objext=o
+objext=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="int some_variable = 0;"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='int main(){return(0);}'
+
+
+
+
+
+
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+
+# Save the default compiler, since it gets overwritten when the other
+# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP.
+compiler_DEFAULT=$CC
+
+# save warnings/boilerplate of simple test code
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_compile_test_code" >conftest.$ac_ext
+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_compiler_boilerplate=`cat conftest.err`
+$RM conftest*
+
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_link_test_code" >conftest.$ac_ext
+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_linker_boilerplate=`cat conftest.err`
+$RM -r conftest*
+
+
+if test -n "$compiler"; then
+
+lt_prog_compiler_no_builtin_flag=
+
+if test yes = "$GCC"; then
+ case $cc_basename in
+ nvcc*)
+ lt_prog_compiler_no_builtin_flag=' -Xcompiler -fno-builtin' ;;
+ *)
+ lt_prog_compiler_no_builtin_flag=' -fno-builtin' ;;
+ esac
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
+$as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; }
+if ${lt_cv_prog_compiler_rtti_exceptions+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_prog_compiler_rtti_exceptions=no
+ ac_outfile=conftest.$ac_objext
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+ lt_compiler_flag="-fno-rtti -fno-exceptions" ## exclude from sc_useless_quotes_in_assignment
+ # Insert the option either (1) after the last *FLAGS variable, or
+ # (2) before a word containing "conftest.", or (3) at the end.
+ # Note that $ac_compile itself does not contain backslashes and begins
+ # with a dollar sign (not a hyphen), so the echo should work correctly.
+ # The option is referenced via a variable to avoid confusing sed.
+ lt_compile=`echo "$ac_compile" | $SED \
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+ -e 's:$: $lt_compiler_flag:'`
+ (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+ (eval "$lt_compile" 2>conftest.err)
+ ac_status=$?
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ if (exit $ac_status) && test -s "$ac_outfile"; then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings other than the usual output.
+ $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+ lt_cv_prog_compiler_rtti_exceptions=yes
+ fi
+ fi
+ $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
+$as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; }
+
+if test yes = "$lt_cv_prog_compiler_rtti_exceptions"; then
+ lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions"
+else
+ :
+fi
+
+fi
+
+
+
+
+
+
+ lt_prog_compiler_wl=
+lt_prog_compiler_pic=
+lt_prog_compiler_static=
+
+
+ if test yes = "$GCC"; then
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_static='-static'
+
+ case $host_os in
+ aix*)
+ # All AIX code is PIC.
+ if test ia64 = "$host_cpu"; then
+ # AIX 5 now supports IA64 processor
+ lt_prog_compiler_static='-Bstatic'
+ fi
+ lt_prog_compiler_pic='-fPIC'
+ ;;
+
+ amigaos*)
+ case $host_cpu in
+ powerpc)
+ # see comment about AmigaOS4 .so support
+ lt_prog_compiler_pic='-fPIC'
+ ;;
+ m68k)
+ # FIXME: we need at least 68020 code to build shared libraries, but
+ # adding the '-m68020' flag to GCC prevents building anything better,
+ # like '-m68040'.
+ lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4'
+ ;;
+ esac
+ ;;
+
+ beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+ # PIC is the default for these OSes.
+ ;;
+
+ mingw* | cygwin* | pw32* | os2* | cegcc*)
+ # This hack is so that the source file can tell whether it is being
+ # built for inclusion in a dll (and should export symbols for example).
+ # Although the cygwin gcc ignores -fPIC, still need this for old-style
+ # (--disable-auto-import) libraries
+ lt_prog_compiler_pic='-DDLL_EXPORT'
+ case $host_os in
+ os2*)
+ lt_prog_compiler_static='$wl-static'
+ ;;
+ esac
+ ;;
+
+ darwin* | rhapsody*)
+ # PIC is the default on this platform
+ # Common symbols not allowed in MH_DYLIB files
+ lt_prog_compiler_pic='-fno-common'
+ ;;
+
+ haiku*)
+ # PIC is the default for Haiku.
+ # The "-static" flag exists, but is broken.
+ lt_prog_compiler_static=
+ ;;
+
+ hpux*)
+ # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
+ # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag
+ # sets the default TLS model and affects inlining.
+ case $host_cpu in
+ hppa*64*)
+ # +Z the default
+ ;;
+ *)
+ lt_prog_compiler_pic='-fPIC'
+ ;;
+ esac
+ ;;
+
+ interix[3-9]*)
+ # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+ # Instead, we relocate shared libraries at runtime.
+ ;;
+
+ msdosdjgpp*)
+ # Just because we use GCC doesn't mean we suddenly get shared libraries
+ # on systems that don't support them.
+ lt_prog_compiler_can_build_shared=no
+ enable_shared=no
+ ;;
+
+ *nto* | *qnx*)
+ # QNX uses GNU C++, but need to define -shared option too, otherwise
+ # it will coredump.
+ lt_prog_compiler_pic='-fPIC -shared'
+ ;;
+
+ sysv4*MP*)
+ if test -d /usr/nec; then
+ lt_prog_compiler_pic=-Kconform_pic
+ fi
+ ;;
+
+ *)
+ lt_prog_compiler_pic='-fPIC'
+ ;;
+ esac
+
+ case $cc_basename in
+ nvcc*) # Cuda Compiler Driver 2.2
+ lt_prog_compiler_wl='-Xlinker '
+ if test -n "$lt_prog_compiler_pic"; then
+ lt_prog_compiler_pic="-Xcompiler $lt_prog_compiler_pic"
+ fi
+ ;;
+ esac
+ else
+ # PORTME Check for flag to pass linker flags through the system compiler.
+ case $host_os in
+ aix*)
+ lt_prog_compiler_wl='-Wl,'
+ if test ia64 = "$host_cpu"; then
+ # AIX 5 now supports IA64 processor
+ lt_prog_compiler_static='-Bstatic'
+ else
+ lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp'
+ fi
+ ;;
+
+ darwin* | rhapsody*)
+ # PIC is the default on this platform
+ # Common symbols not allowed in MH_DYLIB files
+ lt_prog_compiler_pic='-fno-common'
+ case $cc_basename in
+ nagfor*)
+ # NAG Fortran compiler
+ lt_prog_compiler_wl='-Wl,-Wl,,'
+ lt_prog_compiler_pic='-PIC'
+ lt_prog_compiler_static='-Bstatic'
+ ;;
+ esac
+ ;;
+
+ mingw* | cygwin* | pw32* | os2* | cegcc*)
+ # This hack is so that the source file can tell whether it is being
+ # built for inclusion in a dll (and should export symbols for example).
+ lt_prog_compiler_pic='-DDLL_EXPORT'
+ case $host_os in
+ os2*)
+ lt_prog_compiler_static='$wl-static'
+ ;;
+ esac
+ ;;
+
+ hpux9* | hpux10* | hpux11*)
+ lt_prog_compiler_wl='-Wl,'
+ # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+ # not for PA HP-UX.
+ case $host_cpu in
+ hppa*64*|ia64*)
+ # +Z the default
+ ;;
+ *)
+ lt_prog_compiler_pic='+Z'
+ ;;
+ esac
+ # Is there a better lt_prog_compiler_static that works with the bundled CC?
+ lt_prog_compiler_static='$wl-a ${wl}archive'
+ ;;
+
+ irix5* | irix6* | nonstopux*)
+ lt_prog_compiler_wl='-Wl,'
+ # PIC (with -KPIC) is the default.
+ lt_prog_compiler_static='-non_shared'
+ ;;
+
+ linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
+ case $cc_basename in
+ # old Intel for x86_64, which still supported -KPIC.
+ ecc*)
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_pic='-KPIC'
+ lt_prog_compiler_static='-static'
+ ;;
+ # icc used to be incompatible with GCC.
+ # ICC 10 doesn't accept -KPIC any more.
+ icc* | ifort*)
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_pic='-fPIC'
+ lt_prog_compiler_static='-static'
+ ;;
+ # Lahey Fortran 8.1.
+ lf95*)
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_pic='--shared'
+ lt_prog_compiler_static='--static'
+ ;;
+ nagfor*)
+ # NAG Fortran compiler
+ lt_prog_compiler_wl='-Wl,-Wl,,'
+ lt_prog_compiler_pic='-PIC'
+ lt_prog_compiler_static='-Bstatic'
+ ;;
+ tcc*)
+ # Fabrice Bellard et al's Tiny C Compiler
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_pic='-fPIC'
+ lt_prog_compiler_static='-static'
+ ;;
+ pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
+ # Portland Group compilers (*not* the Pentium gcc compiler,
+ # which looks to be a dead project)
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_pic='-fpic'
+ lt_prog_compiler_static='-Bstatic'
+ ;;
+ ccc*)
+ lt_prog_compiler_wl='-Wl,'
+ # All Alpha code is PIC.
+ lt_prog_compiler_static='-non_shared'
+ ;;
+ xl* | bgxl* | bgf* | mpixl*)
+ # IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_pic='-qpic'
+ lt_prog_compiler_static='-qstaticlink'
+ ;;
+ *)
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [1-7].* | *Sun*Fortran*\ 8.[0-3]*)
+ # Sun Fortran 8.3 passes all unrecognized flags to the linker
+ lt_prog_compiler_pic='-KPIC'
+ lt_prog_compiler_static='-Bstatic'
+ lt_prog_compiler_wl=''
+ ;;
+ *Sun\ F* | *Sun*Fortran*)
+ lt_prog_compiler_pic='-KPIC'
+ lt_prog_compiler_static='-Bstatic'
+ lt_prog_compiler_wl='-Qoption ld '
+ ;;
+ *Sun\ C*)
+ # Sun C 5.9
+ lt_prog_compiler_pic='-KPIC'
+ lt_prog_compiler_static='-Bstatic'
+ lt_prog_compiler_wl='-Wl,'
+ ;;
+ *Intel*\ [CF]*Compiler*)
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_pic='-fPIC'
+ lt_prog_compiler_static='-static'
+ ;;
+ *Portland\ Group*)
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_pic='-fpic'
+ lt_prog_compiler_static='-Bstatic'
+ ;;
+ esac
+ ;;
+ esac
+ ;;
+
+ newsos6)
+ lt_prog_compiler_pic='-KPIC'
+ lt_prog_compiler_static='-Bstatic'
+ ;;
+
+ *nto* | *qnx*)
+ # QNX uses GNU C++, but need to define -shared option too, otherwise
+ # it will coredump.
+ lt_prog_compiler_pic='-fPIC -shared'
+ ;;
+
+ osf3* | osf4* | osf5*)
+ lt_prog_compiler_wl='-Wl,'
+ # All OSF/1 code is PIC.
+ lt_prog_compiler_static='-non_shared'
+ ;;
+
+ rdos*)
+ lt_prog_compiler_static='-non_shared'
+ ;;
+
+ solaris*)
+ lt_prog_compiler_pic='-KPIC'
+ lt_prog_compiler_static='-Bstatic'
+ case $cc_basename in
+ f77* | f90* | f95* | sunf77* | sunf90* | sunf95*)
+ lt_prog_compiler_wl='-Qoption ld ';;
+ *)
+ lt_prog_compiler_wl='-Wl,';;
+ esac
+ ;;
+
+ sunos4*)
+ lt_prog_compiler_wl='-Qoption ld '
+ lt_prog_compiler_pic='-PIC'
+ lt_prog_compiler_static='-Bstatic'
+ ;;
+
+ sysv4 | sysv4.2uw2* | sysv4.3*)
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_pic='-KPIC'
+ lt_prog_compiler_static='-Bstatic'
+ ;;
+
+ sysv4*MP*)
+ if test -d /usr/nec; then
+ lt_prog_compiler_pic='-Kconform_pic'
+ lt_prog_compiler_static='-Bstatic'
+ fi
+ ;;
+
+ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_pic='-KPIC'
+ lt_prog_compiler_static='-Bstatic'
+ ;;
+
+ unicos*)
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_can_build_shared=no
+ ;;
+
+ uts4*)
+ lt_prog_compiler_pic='-pic'
+ lt_prog_compiler_static='-Bstatic'
+ ;;
+
+ *)
+ lt_prog_compiler_can_build_shared=no
+ ;;
+ esac
+ fi
+
+case $host_os in
+ # For platforms that do not support PIC, -DPIC is meaningless:
+ *djgpp*)
+ lt_prog_compiler_pic=
+ ;;
+ *)
+ lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC"
+ ;;
+esac
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5
+$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
+if ${lt_cv_prog_compiler_pic+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_prog_compiler_pic=$lt_prog_compiler_pic
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic" >&5
+$as_echo "$lt_cv_prog_compiler_pic" >&6; }
+lt_prog_compiler_pic=$lt_cv_prog_compiler_pic
+
+#
+# Check to make sure the PIC flag actually works.
+#
+if test -n "$lt_prog_compiler_pic"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5
+$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic works... " >&6; }
+if ${lt_cv_prog_compiler_pic_works+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_prog_compiler_pic_works=no
+ ac_outfile=conftest.$ac_objext
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+ lt_compiler_flag="$lt_prog_compiler_pic -DPIC" ## exclude from sc_useless_quotes_in_assignment
+ # Insert the option either (1) after the last *FLAGS variable, or
+ # (2) before a word containing "conftest.", or (3) at the end.
+ # Note that $ac_compile itself does not contain backslashes and begins
+ # with a dollar sign (not a hyphen), so the echo should work correctly.
+ # The option is referenced via a variable to avoid confusing sed.
+ lt_compile=`echo "$ac_compile" | $SED \
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+ -e 's:$: $lt_compiler_flag:'`
+ (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+ (eval "$lt_compile" 2>conftest.err)
+ ac_status=$?
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ if (exit $ac_status) && test -s "$ac_outfile"; then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings other than the usual output.
+ $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+ lt_cv_prog_compiler_pic_works=yes
+ fi
+ fi
+ $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works" >&5
+$as_echo "$lt_cv_prog_compiler_pic_works" >&6; }
+
+if test yes = "$lt_cv_prog_compiler_pic_works"; then
+ case $lt_prog_compiler_pic in
+ "" | " "*) ;;
+ *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;;
+ esac
+else
+ lt_prog_compiler_pic=
+ lt_prog_compiler_can_build_shared=no
+fi
+
+fi
+
+
+
+
+
+
+
+
+
+
+
+#
+# Check to make sure the static flag actually works.
+#
+wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\"
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5
+$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; }
+if ${lt_cv_prog_compiler_static_works+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_prog_compiler_static_works=no
+ save_LDFLAGS=$LDFLAGS
+ LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
+ echo "$lt_simple_link_test_code" > conftest.$ac_ext
+ if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+ # The linker can only warn and ignore the option if not recognized
+ # So say no if there are warnings
+ if test -s conftest.err; then
+ # Append any errors to the config.log.
+ cat conftest.err 1>&5
+ $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+ if diff conftest.exp conftest.er2 >/dev/null; then
+ lt_cv_prog_compiler_static_works=yes
+ fi
+ else
+ lt_cv_prog_compiler_static_works=yes
+ fi
+ fi
+ $RM -r conftest*
+ LDFLAGS=$save_LDFLAGS
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works" >&5
+$as_echo "$lt_cv_prog_compiler_static_works" >&6; }
+
+if test yes = "$lt_cv_prog_compiler_static_works"; then
+ :
+else
+ lt_prog_compiler_static=
+fi
+
+
+
+
+
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
+$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
+if ${lt_cv_prog_compiler_c_o+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_prog_compiler_c_o=no
+ $RM -r conftest 2>/dev/null
+ mkdir conftest
+ cd conftest
+ mkdir out
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+ lt_compiler_flag="-o out/conftest2.$ac_objext"
+ # Insert the option either (1) after the last *FLAGS variable, or
+ # (2) before a word containing "conftest.", or (3) at the end.
+ # Note that $ac_compile itself does not contain backslashes and begins
+ # with a dollar sign (not a hyphen), so the echo should work correctly.
+ lt_compile=`echo "$ac_compile" | $SED \
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+ -e 's:$: $lt_compiler_flag:'`
+ (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+ (eval "$lt_compile" 2>out/conftest.err)
+ ac_status=$?
+ cat out/conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ if (exit $ac_status) && test -s out/conftest2.$ac_objext
+ then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings
+ $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
+ $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+ if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+ lt_cv_prog_compiler_c_o=yes
+ fi
+ fi
+ chmod u+w . 2>&5
+ $RM conftest*
+ # SGI C++ compiler will create directory out/ii_files/ for
+ # template instantiation
+ test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+ $RM out/* && rmdir out
+ cd ..
+ $RM -r conftest
+ $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5
+$as_echo "$lt_cv_prog_compiler_c_o" >&6; }
+
+
+
+
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
+$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
+if ${lt_cv_prog_compiler_c_o+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_prog_compiler_c_o=no
+ $RM -r conftest 2>/dev/null
+ mkdir conftest
+ cd conftest
+ mkdir out
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+ lt_compiler_flag="-o out/conftest2.$ac_objext"
+ # Insert the option either (1) after the last *FLAGS variable, or
+ # (2) before a word containing "conftest.", or (3) at the end.
+ # Note that $ac_compile itself does not contain backslashes and begins
+ # with a dollar sign (not a hyphen), so the echo should work correctly.
+ lt_compile=`echo "$ac_compile" | $SED \
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+ -e 's:$: $lt_compiler_flag:'`
+ (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+ (eval "$lt_compile" 2>out/conftest.err)
+ ac_status=$?
+ cat out/conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ if (exit $ac_status) && test -s out/conftest2.$ac_objext
+ then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings
+ $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
+ $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+ if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+ lt_cv_prog_compiler_c_o=yes
+ fi
+ fi
+ chmod u+w . 2>&5
+ $RM conftest*
+ # SGI C++ compiler will create directory out/ii_files/ for
+ # template instantiation
+ test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+ $RM out/* && rmdir out
+ cd ..
+ $RM -r conftest
+ $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5
+$as_echo "$lt_cv_prog_compiler_c_o" >&6; }
+
+
+
+
+hard_links=nottested
+if test no = "$lt_cv_prog_compiler_c_o" && test no != "$need_locks"; then
+ # do not overwrite the value of need_locks provided by the user
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5
+$as_echo_n "checking if we can lock with hard links... " >&6; }
+ hard_links=yes
+ $RM conftest*
+ ln conftest.a conftest.b 2>/dev/null && hard_links=no
+ touch conftest.a
+ ln conftest.a conftest.b 2>&5 || hard_links=no
+ ln conftest.a conftest.b 2>/dev/null && hard_links=no
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5
+$as_echo "$hard_links" >&6; }
+ if test no = "$hard_links"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: '$CC' does not support '-c -o', so 'make -j' may be unsafe" >&5
+$as_echo "$as_me: WARNING: '$CC' does not support '-c -o', so 'make -j' may be unsafe" >&2;}
+ need_locks=warn
+ fi
+else
+ need_locks=no
+fi
+
+
+
+
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5
+$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; }
+
+ runpath_var=
+ allow_undefined_flag=
+ always_export_symbols=no
+ archive_cmds=
+ archive_expsym_cmds=
+ compiler_needs_object=no
+ enable_shared_with_static_runtimes=no
+ export_dynamic_flag_spec=
+ export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+ hardcode_automatic=no
+ hardcode_direct=no
+ hardcode_direct_absolute=no
+ hardcode_libdir_flag_spec=
+ hardcode_libdir_separator=
+ hardcode_minus_L=no
+ hardcode_shlibpath_var=unsupported
+ inherit_rpath=no
+ link_all_deplibs=unknown
+ module_cmds=
+ module_expsym_cmds=
+ old_archive_from_new_cmds=
+ old_archive_from_expsyms_cmds=
+ thread_safe_flag_spec=
+ whole_archive_flag_spec=
+ # include_expsyms should be a list of space-separated symbols to be *always*
+ # included in the symbol list
+ include_expsyms=
+ # exclude_expsyms can be an extended regexp of symbols to exclude
+ # it will be wrapped by ' (' and ')$', so one must not match beginning or
+ # end of line. Example: 'a|bc|.*d.*' will exclude the symbols 'a' and 'bc',
+ # as well as any symbol that contains 'd'.
+ exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
+ # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
+ # platforms (ab)use it in PIC code, but their linkers get confused if
+ # the symbol is explicitly referenced. Since portable code cannot
+ # rely on this symbol name, it's probably fine to never include it in
+ # preloaded symbol tables.
+ # Exclude shared library initialization/finalization symbols.
+ extract_expsyms_cmds=
+
+ case $host_os in
+ cygwin* | mingw* | pw32* | cegcc*)
+ # FIXME: the MSVC++ port hasn't been tested in a loooong time
+ # When not using gcc, we currently assume that we are using
+ # Microsoft Visual C++.
+ if test yes != "$GCC"; then
+ with_gnu_ld=no
+ fi
+ ;;
+ interix*)
+ # we just hope/assume this is gcc and not c89 (= MSVC++)
+ with_gnu_ld=yes
+ ;;
+ openbsd* | bitrig*)
+ with_gnu_ld=no
+ ;;
+ esac
+
+ ld_shlibs=yes
+
+ # On some targets, GNU ld is compatible enough with the native linker
+ # that we're better off using the native interface for both.
+ lt_use_gnu_ld_interface=no
+ if test yes = "$with_gnu_ld"; then
+ case $host_os in
+ aix*)
+ # The AIX port of GNU ld has always aspired to compatibility
+ # with the native linker. However, as the warning in the GNU ld
+ # block says, versions before 2.19.5* couldn't really create working
+ # shared libraries, regardless of the interface used.
+ case `$LD -v 2>&1` in
+ *\ \(GNU\ Binutils\)\ 2.19.5*) ;;
+ *\ \(GNU\ Binutils\)\ 2.[2-9]*) ;;
+ *\ \(GNU\ Binutils\)\ [3-9]*) ;;
+ *)
+ lt_use_gnu_ld_interface=yes
+ ;;
+ esac
+ ;;
+ *)
+ lt_use_gnu_ld_interface=yes
+ ;;
+ esac
+ fi
+
+ if test yes = "$lt_use_gnu_ld_interface"; then
+ # If archive_cmds runs LD, not CC, wlarc should be empty
+ wlarc='$wl'
+
+ # Set some defaults for GNU ld with shared library support. These
+ # are reset later if shared libraries are not supported. Putting them
+ # here allows them to be overridden if necessary.
+ runpath_var=LD_RUN_PATH
+ hardcode_libdir_flag_spec='$wl-rpath $wl$libdir'
+ export_dynamic_flag_spec='$wl--export-dynamic'
+ # ancient GNU ld didn't support --whole-archive et. al.
+ if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
+ whole_archive_flag_spec=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive'
+ else
+ whole_archive_flag_spec=
+ fi
+ supports_anon_versioning=no
+ case `$LD -v | $SED -e 's/(^)\+)\s\+//' 2>&1` in
+ *GNU\ gold*) supports_anon_versioning=yes ;;
+ *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
+ *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
+ *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
+ *\ 2.11.*) ;; # other 2.11 versions
+ *) supports_anon_versioning=yes ;;
+ esac
+
+ # See if GNU ld supports shared libraries.
+ case $host_os in
+ aix[3-9]*)
+ # On AIX/PPC, the GNU linker is very broken
+ if test ia64 != "$host_cpu"; then
+ ld_shlibs=no
+ cat <<_LT_EOF 1>&2
+
+*** Warning: the GNU linker, at least up to release 2.19, is reported
+*** to be unable to reliably create shared libraries on AIX.
+*** Therefore, libtool is disabling shared libraries support. If you
+*** really care for shared libraries, you may want to install binutils
+*** 2.20 or above, or modify your PATH so that a non-GNU linker is found.
+*** You will then need to restart the configuration process.
+
+_LT_EOF
+ fi
+ ;;
+
+ amigaos*)
+ case $host_cpu in
+ powerpc)
+ # see comment about AmigaOS4 .so support
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+ archive_expsym_cmds=''
+ ;;
+ m68k)
+ archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_minus_L=yes
+ ;;
+ esac
+ ;;
+
+ beos*)
+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ allow_undefined_flag=unsupported
+ # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+ # support --undefined. This deserves some investigation. FIXME
+ archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+ else
+ ld_shlibs=no
+ fi
+ ;;
+
+ cygwin* | mingw* | pw32* | cegcc*)
+ # _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless,
+ # as there is no search path for DLLs.
+ hardcode_libdir_flag_spec='-L$libdir'
+ export_dynamic_flag_spec='$wl--export-all-symbols'
+ allow_undefined_flag=unsupported
+ always_export_symbols=no
+ enable_shared_with_static_runtimes=yes
+ export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols'
+ exclude_expsyms='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'
+
+ if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ # If the export-symbols file already is a .def file, use it as
+ # is; otherwise, prepend EXPORTS...
+ archive_expsym_cmds='if test DEF = "`$SED -n -e '\''s/^[ ]*//'\'' -e '\''/^\(;.*\)*$/d'\'' -e '\''s/^\(EXPORTS\|LIBRARY\)\([ ].*\)*$/DEF/p'\'' -e q $export_symbols`" ; then
+ cp $export_symbols $output_objdir/$soname.def;
+ else
+ echo EXPORTS > $output_objdir/$soname.def;
+ cat $export_symbols >> $output_objdir/$soname.def;
+ fi~
+ $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ else
+ ld_shlibs=no
+ fi
+ ;;
+
+ haiku*)
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+ link_all_deplibs=yes
+ ;;
+
+ os2*)
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_minus_L=yes
+ allow_undefined_flag=unsupported
+ shrext_cmds=.dll
+ archive_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+ $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+ $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+ $ECHO EXPORTS >> $output_objdir/$libname.def~
+ emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~
+ $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+ emximp -o $lib $output_objdir/$libname.def'
+ archive_expsym_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+ $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+ $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+ $ECHO EXPORTS >> $output_objdir/$libname.def~
+ prefix_cmds="$SED"~
+ if test EXPORTS = "`$SED 1q $export_symbols`"; then
+ prefix_cmds="$prefix_cmds -e 1d";
+ fi~
+ prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~
+ cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~
+ $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+ emximp -o $lib $output_objdir/$libname.def'
+ old_archive_From_new_cmds='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def'
+ enable_shared_with_static_runtimes=yes
+ ;;
+
+ interix[3-9]*)
+ hardcode_direct=no
+ hardcode_shlibpath_var=no
+ hardcode_libdir_flag_spec='$wl-rpath,$libdir'
+ export_dynamic_flag_spec='$wl-E'
+ # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+ # Instead, shared libraries are loaded at an image base (0x10000000 by
+ # default) and relocated if they conflict, which is a slow very memory
+ # consuming and fragmenting process. To avoid this, we pick a random,
+ # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+ # time. Moving up from 0x10000000 also allows more sbrk(2) space.
+ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ archive_expsym_cmds='sed "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--retain-symbols-file,$output_objdir/$soname.expsym $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ ;;
+
+ gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu)
+ tmp_diet=no
+ if test linux-dietlibc = "$host_os"; then
+ case $cc_basename in
+ diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn)
+ esac
+ fi
+ if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
+ && test no = "$tmp_diet"
+ then
+ tmp_addflag=' $pic_flag'
+ tmp_sharedflag='-shared'
+ case $cc_basename,$host_cpu in
+ pgcc*) # Portland Group C compiler
+ whole_archive_flag_spec='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
+ tmp_addflag=' $pic_flag'
+ ;;
+ pgf77* | pgf90* | pgf95* | pgfortran*)
+ # Portland Group f77 and f90 compilers
+ whole_archive_flag_spec='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
+ tmp_addflag=' $pic_flag -Mnomain' ;;
+ ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64
+ tmp_addflag=' -i_dynamic' ;;
+ efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64
+ tmp_addflag=' -i_dynamic -nofor_main' ;;
+ ifc* | ifort*) # Intel Fortran compiler
+ tmp_addflag=' -nofor_main' ;;
+ lf95*) # Lahey Fortran 8.1
+ whole_archive_flag_spec=
+ tmp_sharedflag='--shared' ;;
+ nagfor*) # NAGFOR 5.3
+ tmp_sharedflag='-Wl,-shared' ;;
+ xl[cC]* | bgxl[cC]* | mpixl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below)
+ tmp_sharedflag='-qmkshrobj'
+ tmp_addflag= ;;
+ nvcc*) # Cuda Compiler Driver 2.2
+ whole_archive_flag_spec='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
+ compiler_needs_object=yes
+ ;;
+ esac
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ C*) # Sun C 5.9
+ whole_archive_flag_spec='$wl--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
+ compiler_needs_object=yes
+ tmp_sharedflag='-G' ;;
+ *Sun\ F*) # Sun Fortran 8.3
+ tmp_sharedflag='-G' ;;
+ esac
+ archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+
+ if test yes = "$supports_anon_versioning"; then
+ archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+ echo "local: *; };" >> $output_objdir/$libname.ver~
+ $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-version-script $wl$output_objdir/$libname.ver -o $lib'
+ fi
+
+ case $cc_basename in
+ tcc*)
+ export_dynamic_flag_spec='-rdynamic'
+ ;;
+ xlf* | bgf* | bgxlf* | mpixlf*)
+ # IBM XL Fortran 10.1 on PPC cannot create shared libs itself
+ whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive'
+ hardcode_libdir_flag_spec='$wl-rpath $wl$libdir'
+ archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib'
+ if test yes = "$supports_anon_versioning"; then
+ archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+ echo "local: *; };" >> $output_objdir/$libname.ver~
+ $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
+ fi
+ ;;
+ esac
+ else
+ ld_shlibs=no
+ fi
+ ;;
+
+ netbsd*)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+ archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
+ wlarc=
+ else
+ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
+ fi
+ ;;
+
+ solaris*)
+ if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then
+ ld_shlibs=no
+ cat <<_LT_EOF 1>&2
+
+*** Warning: The releases 2.8.* of the GNU linker cannot reliably
+*** create shared libraries on Solaris systems. Therefore, libtool
+*** is disabling shared libraries support. We urge you to upgrade GNU
+*** binutils to release 2.9.1 or newer. Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+ elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
+ else
+ ld_shlibs=no
+ fi
+ ;;
+
+ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
+ case `$LD -v 2>&1` in
+ *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
+ ld_shlibs=no
+ cat <<_LT_EOF 1>&2
+
+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 cannot
+*** reliably create shared libraries on SCO systems. Therefore, libtool
+*** is disabling shared libraries support. We urge you to upgrade GNU
+*** binutils to release 2.16.91.0.3 or newer. Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+ ;;
+ *)
+ # For security reasons, it is highly recommended that you always
+ # use absolute paths for naming shared libraries, and exclude the
+ # DT_RUNPATH tag from executables and libraries. But doing so
+ # requires that you compile everything twice, which is a pain.
+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ hardcode_libdir_flag_spec='$wl-rpath $wl$libdir'
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
+ else
+ ld_shlibs=no
+ fi
+ ;;
+ esac
+ ;;
+
+ sunos4*)
+ archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+ wlarc=
+ hardcode_direct=yes
+ hardcode_shlibpath_var=no
+ ;;
+
+ *)
+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
+ else
+ ld_shlibs=no
+ fi
+ ;;
+ esac
+
+ if test no = "$ld_shlibs"; then
+ runpath_var=
+ hardcode_libdir_flag_spec=
+ export_dynamic_flag_spec=
+ whole_archive_flag_spec=
+ fi
+ else
+ # PORTME fill in a description of your system's linker (not GNU ld)
+ case $host_os in
+ aix3*)
+ allow_undefined_flag=unsupported
+ always_export_symbols=yes
+ archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
+ # Note: this linker hardcodes the directories in LIBPATH if there
+ # are no directories specified by -L.
+ hardcode_minus_L=yes
+ if test yes = "$GCC" && test -z "$lt_prog_compiler_static"; then
+ # Neither direct hardcoding nor static linking is supported with a
+ # broken collect2.
+ hardcode_direct=unsupported
+ fi
+ ;;
+
+ aix[4-9]*)
+ if test ia64 = "$host_cpu"; then
+ # On IA64, the linker does run time linking by default, so we don't
+ # have to do anything special.
+ aix_use_runtimelinking=no
+ exp_sym_flag='-Bexport'
+ no_entry_flag=
+ else
+ # If we're using GNU nm, then we don't want the "-C" option.
+ # -C means demangle to GNU nm, but means don't demangle to AIX nm.
+ # Without the "-l" option, or with the "-B" option, AIX nm treats
+ # weak defined symbols like other global defined symbols, whereas
+ # GNU nm marks them as "W".
+ # While the 'weak' keyword is ignored in the Export File, we need
+ # it in the Import File for the 'aix-soname' feature, so we have
+ # to replace the "-B" option with "-P" for AIX nm.
+ if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+ export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { if (\$ 2 == "W") { print \$ 3 " weak" } else { print \$ 3 } } }'\'' | sort -u > $export_symbols'
+ else
+ export_symbols_cmds='`func_echo_all $NM | $SED -e '\''s/B\([^B]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && (substr(\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols'
+ fi
+ aix_use_runtimelinking=no
+
+ # Test if we are trying to use run time linking or normal
+ # AIX style linking. If -brtl is somewhere in LDFLAGS, we
+ # have runtime linking enabled, and use it for executables.
+ # For shared libraries, we enable/disable runtime linking
+ # depending on the kind of the shared library created -
+ # when "with_aix_soname,aix_use_runtimelinking" is:
+ # "aix,no" lib.a(lib.so.V) shared, rtl:no, for executables
+ # "aix,yes" lib.so shared, rtl:yes, for executables
+ # lib.a static archive
+ # "both,no" lib.so.V(shr.o) shared, rtl:yes
+ # lib.a(lib.so.V) shared, rtl:no, for executables
+ # "both,yes" lib.so.V(shr.o) shared, rtl:yes, for executables
+ # lib.a(lib.so.V) shared, rtl:no
+ # "svr4,*" lib.so.V(shr.o) shared, rtl:yes, for executables
+ # lib.a static archive
+ case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
+ for ld_flag in $LDFLAGS; do
+ if (test x-brtl = "x$ld_flag" || test x-Wl,-brtl = "x$ld_flag"); then
+ aix_use_runtimelinking=yes
+ break
+ fi
+ done
+ if test svr4,no = "$with_aix_soname,$aix_use_runtimelinking"; then
+ # With aix-soname=svr4, we create the lib.so.V shared archives only,
+ # so we don't have lib.a shared libs to link our executables.
+ # We have to force runtime linking in this case.
+ aix_use_runtimelinking=yes
+ LDFLAGS="$LDFLAGS -Wl,-brtl"
+ fi
+ ;;
+ esac
+
+ exp_sym_flag='-bexport'
+ no_entry_flag='-bnoentry'
+ fi
+
+ # When large executables or shared objects are built, AIX ld can
+ # have problems creating the table of contents. If linking a library
+ # or program results in "error TOC overflow" add -mminimal-toc to
+ # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
+ # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+ archive_cmds=''
+ hardcode_direct=yes
+ hardcode_direct_absolute=yes
+ hardcode_libdir_separator=':'
+ link_all_deplibs=yes
+ file_list_spec='$wl-f,'
+ case $with_aix_soname,$aix_use_runtimelinking in
+ aix,*) ;; # traditional, no import file
+ svr4,* | *,yes) # use import file
+ # The Import File defines what to hardcode.
+ hardcode_direct=no
+ hardcode_direct_absolute=no
+ ;;
+ esac
+
+ if test yes = "$GCC"; then
+ case $host_os in aix4.[012]|aix4.[012].*)
+ # We only want to do this on AIX 4.2 and lower, the check
+ # below for broken collect2 doesn't work under 4.3+
+ collect2name=`$CC -print-prog-name=collect2`
+ if test -f "$collect2name" &&
+ strings "$collect2name" | $GREP resolve_lib_name >/dev/null
+ then
+ # We have reworked collect2
+ :
+ else
+ # We have old collect2
+ hardcode_direct=unsupported
+ # It fails to find uninstalled libraries when the uninstalled
+ # path is not listed in the libpath. Setting hardcode_minus_L
+ # to unsupported forces relinking
+ hardcode_minus_L=yes
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_libdir_separator=
+ fi
+ ;;
+ esac
+ shared_flag='-shared'
+ if test yes = "$aix_use_runtimelinking"; then
+ shared_flag="$shared_flag "'$wl-G'
+ fi
+ # Need to ensure runtime linking is disabled for the traditional
+ # shared library, or the linker may eventually find shared libraries
+ # /with/ Import File - we do not want to mix them.
+ shared_flag_aix='-shared'
+ shared_flag_svr4='-shared $wl-G'
+ else
+ # not using gcc
+ if test ia64 = "$host_cpu"; then
+ # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+ # chokes on -Wl,-G. The following line is correct:
+ shared_flag='-G'
+ else
+ if test yes = "$aix_use_runtimelinking"; then
+ shared_flag='$wl-G'
+ else
+ shared_flag='$wl-bM:SRE'
+ fi
+ shared_flag_aix='$wl-bM:SRE'
+ shared_flag_svr4='$wl-G'
+ fi
+ fi
+
+ export_dynamic_flag_spec='$wl-bexpall'
+ # It seems that -bexpall does not export symbols beginning with
+ # underscore (_), so it is better to generate a list of symbols to export.
+ always_export_symbols=yes
+ if test aix,yes = "$with_aix_soname,$aix_use_runtimelinking"; then
+ # Warning - without using the other runtime loading flags (-brtl),
+ # -berok will link without error, but may produce a broken library.
+ allow_undefined_flag='-berok'
+ # Determine the default libpath from the value encoded in an
+ # empty executable.
+ if test set = "${lt_cv_aix_libpath+set}"; then
+ aix_libpath=$lt_cv_aix_libpath
+else
+ if ${lt_cv_aix_libpath_+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+
+ lt_aix_libpath_sed='
+ /Import File Strings/,/^$/ {
+ /^0/ {
+ s/^0 *\([^ ]*\) *$/\1/
+ p
+ }
+ }'
+ lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+ # Check for a 64-bit object if we didn't find anything.
+ if test -z "$lt_cv_aix_libpath_"; then
+ lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+ fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ if test -z "$lt_cv_aix_libpath_"; then
+ lt_cv_aix_libpath_=/usr/lib:/lib
+ fi
+
+fi
+
+ aix_libpath=$lt_cv_aix_libpath_
+fi
+
+ hardcode_libdir_flag_spec='$wl-blibpath:$libdir:'"$aix_libpath"
+ archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs $wl'$no_entry_flag' $compiler_flags `if test -n "$allow_undefined_flag"; then func_echo_all "$wl$allow_undefined_flag"; else :; fi` $wl'$exp_sym_flag:\$export_symbols' '$shared_flag
+ else
+ if test ia64 = "$host_cpu"; then
+ hardcode_libdir_flag_spec='$wl-R $libdir:/usr/lib:/lib'
+ allow_undefined_flag="-z nodefs"
+ archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\$wl$no_entry_flag"' $compiler_flags $wl$allow_undefined_flag '"\$wl$exp_sym_flag:\$export_symbols"
+ else
+ # Determine the default libpath from the value encoded in an
+ # empty executable.
+ if test set = "${lt_cv_aix_libpath+set}"; then
+ aix_libpath=$lt_cv_aix_libpath
+else
+ if ${lt_cv_aix_libpath_+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+
+ lt_aix_libpath_sed='
+ /Import File Strings/,/^$/ {
+ /^0/ {
+ s/^0 *\([^ ]*\) *$/\1/
+ p
+ }
+ }'
+ lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+ # Check for a 64-bit object if we didn't find anything.
+ if test -z "$lt_cv_aix_libpath_"; then
+ lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+ fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ if test -z "$lt_cv_aix_libpath_"; then
+ lt_cv_aix_libpath_=/usr/lib:/lib
+ fi
+
+fi
+
+ aix_libpath=$lt_cv_aix_libpath_
+fi
+
+ hardcode_libdir_flag_spec='$wl-blibpath:$libdir:'"$aix_libpath"
+ # Warning - without using the other run time loading flags,
+ # -berok will link without error, but may produce a broken library.
+ no_undefined_flag=' $wl-bernotok'
+ allow_undefined_flag=' $wl-berok'
+ if test yes = "$with_gnu_ld"; then
+ # We only use this code for GNU lds that support --whole-archive.
+ whole_archive_flag_spec='$wl--whole-archive$convenience $wl--no-whole-archive'
+ else
+ # Exported symbols can be pulled into shared objects from archives
+ whole_archive_flag_spec='$convenience'
+ fi
+ archive_cmds_need_lc=yes
+ archive_expsym_cmds='$RM -r $output_objdir/$realname.d~$MKDIR $output_objdir/$realname.d'
+ # -brtl affects multiple linker settings, -berok does not and is overridden later
+ compiler_flags_filtered='`func_echo_all "$compiler_flags " | $SED -e "s%-brtl\\([, ]\\)%-berok\\1%g"`'
+ if test svr4 != "$with_aix_soname"; then
+ # This is similar to how AIX traditionally builds its shared libraries.
+ archive_expsym_cmds="$archive_expsym_cmds"'~$CC '$shared_flag_aix' -o $output_objdir/$realname.d/$soname $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$realname.d/$soname'
+ fi
+ if test aix != "$with_aix_soname"; then
+ archive_expsym_cmds="$archive_expsym_cmds"'~$CC '$shared_flag_svr4' -o $output_objdir/$realname.d/$shared_archive_member_spec.o $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$STRIP -e $output_objdir/$realname.d/$shared_archive_member_spec.o~( func_echo_all "#! $soname($shared_archive_member_spec.o)"; if test shr_64 = "$shared_archive_member_spec"; then func_echo_all "# 64"; else func_echo_all "# 32"; fi; cat $export_symbols ) > $output_objdir/$realname.d/$shared_archive_member_spec.imp~$AR $AR_FLAGS $output_objdir/$soname $output_objdir/$realname.d/$shared_archive_member_spec.o $output_objdir/$realname.d/$shared_archive_member_spec.imp'
+ else
+ # used by -dlpreopen to get the symbols
+ archive_expsym_cmds="$archive_expsym_cmds"'~$MV $output_objdir/$realname.d/$soname $output_objdir'
+ fi
+ archive_expsym_cmds="$archive_expsym_cmds"'~$RM -r $output_objdir/$realname.d'
+ fi
+ fi
+ ;;
+
+ amigaos*)
+ case $host_cpu in
+ powerpc)
+ # see comment about AmigaOS4 .so support
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+ archive_expsym_cmds=''
+ ;;
+ m68k)
+ archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_minus_L=yes
+ ;;
+ esac
+ ;;
+
+ bsdi[45]*)
+ export_dynamic_flag_spec=-rdynamic
+ ;;
+
+ cygwin* | mingw* | pw32* | cegcc*)
+ # When not using gcc, we currently assume that we are using
+ # Microsoft Visual C++.
+ # hardcode_libdir_flag_spec is actually meaningless, as there is
+ # no search path for DLLs.
+ case $cc_basename in
+ cl*)
+ # Native MSVC
+ hardcode_libdir_flag_spec=' '
+ allow_undefined_flag=unsupported
+ always_export_symbols=yes
+ file_list_spec='@'
+ # Tell ltmain to make .lib files, not .a files.
+ libext=lib
+ # Tell ltmain to make .dll files, not .so files.
+ shrext_cmds=.dll
+ # FIXME: Setting linknames here is a bad hack.
+ archive_cmds='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~linknames='
+ archive_expsym_cmds='if test DEF = "`$SED -n -e '\''s/^[ ]*//'\'' -e '\''/^\(;.*\)*$/d'\'' -e '\''s/^\(EXPORTS\|LIBRARY\)\([ ].*\)*$/DEF/p'\'' -e q $export_symbols`" ; then
+ cp "$export_symbols" "$output_objdir/$soname.def";
+ echo "$tool_output_objdir$soname.def" > "$output_objdir/$soname.exp";
+ else
+ $SED -e '\''s/^/-link -EXPORT:/'\'' < $export_symbols > $output_objdir/$soname.exp;
+ fi~
+ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
+ linknames='
+ # The linker will not automatically build a static lib if we build a DLL.
+ # _LT_TAGVAR(old_archive_from_new_cmds, )='true'
+ enable_shared_with_static_runtimes=yes
+ exclude_expsyms='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*'
+ export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1,DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
+ # Don't use ranlib
+ old_postinstall_cmds='chmod 644 $oldlib'
+ postlink_cmds='lt_outputfile="@OUTPUT@"~
+ lt_tool_outputfile="@TOOL_OUTPUT@"~
+ case $lt_outputfile in
+ *.exe|*.EXE) ;;
+ *)
+ lt_outputfile=$lt_outputfile.exe
+ lt_tool_outputfile=$lt_tool_outputfile.exe
+ ;;
+ esac~
+ if test : != "$MANIFEST_TOOL" && test -f "$lt_outputfile.manifest"; then
+ $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
+ $RM "$lt_outputfile.manifest";
+ fi'
+ ;;
+ *)
+ # Assume MSVC wrapper
+ hardcode_libdir_flag_spec=' '
+ allow_undefined_flag=unsupported
+ # Tell ltmain to make .lib files, not .a files.
+ libext=lib
+ # Tell ltmain to make .dll files, not .so files.
+ shrext_cmds=.dll
+ # FIXME: Setting linknames here is a bad hack.
+ archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
+ # The linker will automatically build a .lib file if we build a DLL.
+ old_archive_from_new_cmds='true'
+ # FIXME: Should let the user specify the lib program.
+ old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs'
+ enable_shared_with_static_runtimes=yes
+ ;;
+ esac
+ ;;
+
+ darwin* | rhapsody*)
+
+
+ archive_cmds_need_lc=no
+ hardcode_direct=no
+ hardcode_automatic=yes
+ hardcode_shlibpath_var=unsupported
+ if test yes = "$lt_cv_ld_force_load"; then
+ whole_archive_flag_spec='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience $wl-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
+
+ else
+ whole_archive_flag_spec=''
+ fi
+ link_all_deplibs=yes
+ allow_undefined_flag=$_lt_dar_allow_undefined
+ case $cc_basename in
+ ifort*|nagfor*) _lt_dar_can_shared=yes ;;
+ *) _lt_dar_can_shared=$GCC ;;
+ esac
+ if test yes = "$_lt_dar_can_shared"; then
+ output_verbose_link_cmd=func_echo_all
+ archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dsymutil"
+ module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dsymutil"
+ archive_expsym_cmds="sed 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dar_export_syms$_lt_dsymutil"
+ module_expsym_cmds="sed -e 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dar_export_syms$_lt_dsymutil"
+
+ else
+ ld_shlibs=no
+ fi
+
+ ;;
+
+ dgux*)
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_shlibpath_var=no
+ ;;
+
+ # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
+ # support. Future versions do this automatically, but an explicit c++rt0.o
+ # does not break anything, and helps significantly (at the cost of a little
+ # extra space).
+ freebsd2.2*)
+ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
+ hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_direct=yes
+ hardcode_shlibpath_var=no
+ ;;
+
+ # Unfortunately, older versions of FreeBSD 2 do not have this feature.
+ freebsd2.*)
+ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_direct=yes
+ hardcode_minus_L=yes
+ hardcode_shlibpath_var=no
+ ;;
+
+ # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
+ freebsd* | dragonfly*)
+ archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_direct=yes
+ hardcode_shlibpath_var=no
+ ;;
+
+ hpux9*)
+ if test yes = "$GCC"; then
+ archive_cmds='$RM $output_objdir/$soname~$CC -shared $pic_flag $wl+b $wl$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib'
+ else
+ archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib'
+ fi
+ hardcode_libdir_flag_spec='$wl+b $wl$libdir'
+ hardcode_libdir_separator=:
+ hardcode_direct=yes
+
+ # hardcode_minus_L: Not really in the search PATH,
+ # but as the default location of the library.
+ hardcode_minus_L=yes
+ export_dynamic_flag_spec='$wl-E'
+ ;;
+
+ hpux10*)
+ if test yes,no = "$GCC,$with_gnu_ld"; then
+ archive_cmds='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ else
+ archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+ fi
+ if test no = "$with_gnu_ld"; then
+ hardcode_libdir_flag_spec='$wl+b $wl$libdir'
+ hardcode_libdir_separator=:
+ hardcode_direct=yes
+ hardcode_direct_absolute=yes
+ export_dynamic_flag_spec='$wl-E'
+ # hardcode_minus_L: Not really in the search PATH,
+ # but as the default location of the library.
+ hardcode_minus_L=yes
+ fi
+ ;;
+
+ hpux11*)
+ if test yes,no = "$GCC,$with_gnu_ld"; then
+ case $host_cpu in
+ hppa*64*)
+ archive_cmds='$CC -shared $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ ia64*)
+ archive_cmds='$CC -shared $pic_flag $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ *)
+ archive_cmds='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ esac
+ else
+ case $host_cpu in
+ hppa*64*)
+ archive_cmds='$CC -b $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ ia64*)
+ archive_cmds='$CC -b $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ *)
+
+ # Older versions of the 11.00 compiler do not understand -b yet
+ # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC understands -b" >&5
+$as_echo_n "checking if $CC understands -b... " >&6; }
+if ${lt_cv_prog_compiler__b+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_prog_compiler__b=no
+ save_LDFLAGS=$LDFLAGS
+ LDFLAGS="$LDFLAGS -b"
+ echo "$lt_simple_link_test_code" > conftest.$ac_ext
+ if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+ # The linker can only warn and ignore the option if not recognized
+ # So say no if there are warnings
+ if test -s conftest.err; then
+ # Append any errors to the config.log.
+ cat conftest.err 1>&5
+ $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+ if diff conftest.exp conftest.er2 >/dev/null; then
+ lt_cv_prog_compiler__b=yes
+ fi
+ else
+ lt_cv_prog_compiler__b=yes
+ fi
+ fi
+ $RM -r conftest*
+ LDFLAGS=$save_LDFLAGS
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler__b" >&5
+$as_echo "$lt_cv_prog_compiler__b" >&6; }
+
+if test yes = "$lt_cv_prog_compiler__b"; then
+ archive_cmds='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+else
+ archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+fi
+
+ ;;
+ esac
+ fi
+ if test no = "$with_gnu_ld"; then
+ hardcode_libdir_flag_spec='$wl+b $wl$libdir'
+ hardcode_libdir_separator=:
+
+ case $host_cpu in
+ hppa*64*|ia64*)
+ hardcode_direct=no
+ hardcode_shlibpath_var=no
+ ;;
+ *)
+ hardcode_direct=yes
+ hardcode_direct_absolute=yes
+ export_dynamic_flag_spec='$wl-E'
+
+ # hardcode_minus_L: Not really in the search PATH,
+ # but as the default location of the library.
+ hardcode_minus_L=yes
+ ;;
+ esac
+ fi
+ ;;
+
+ irix5* | irix6* | nonstopux*)
+ if test yes = "$GCC"; then
+ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
+ # Try to use the -exported_symbol ld option, if it does not
+ # work, assume that -exports_file does not work either and
+ # implicitly export all symbols.
+ # This should be the same for all languages, so no per-tag cache variable.
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $host_os linker accepts -exported_symbol" >&5
+$as_echo_n "checking whether the $host_os linker accepts -exported_symbol... " >&6; }
+if ${lt_cv_irix_exported_symbol+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ save_LDFLAGS=$LDFLAGS
+ LDFLAGS="$LDFLAGS -shared $wl-exported_symbol ${wl}foo $wl-update_registry $wl/dev/null"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+int foo (void) { return 0; }
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ lt_cv_irix_exported_symbol=yes
+else
+ lt_cv_irix_exported_symbol=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ LDFLAGS=$save_LDFLAGS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_irix_exported_symbol" >&5
+$as_echo "$lt_cv_irix_exported_symbol" >&6; }
+ if test yes = "$lt_cv_irix_exported_symbol"; then
+ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations $wl-exports_file $wl$export_symbols -o $lib'
+ fi
+ else
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
+ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -exports_file $export_symbols -o $lib'
+ fi
+ archive_cmds_need_lc='no'
+ hardcode_libdir_flag_spec='$wl-rpath $wl$libdir'
+ hardcode_libdir_separator=:
+ inherit_rpath=yes
+ link_all_deplibs=yes
+ ;;
+
+ linux*)
+ case $cc_basename in
+ tcc*)
+ # Fabrice Bellard et al's Tiny C Compiler
+ ld_shlibs=yes
+ archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ esac
+ ;;
+
+ netbsd*)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
+ else
+ archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF
+ fi
+ hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_direct=yes
+ hardcode_shlibpath_var=no
+ ;;
+
+ newsos6)
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_direct=yes
+ hardcode_libdir_flag_spec='$wl-rpath $wl$libdir'
+ hardcode_libdir_separator=:
+ hardcode_shlibpath_var=no
+ ;;
+
+ *nto* | *qnx*)
+ ;;
+
+ openbsd* | bitrig*)
+ if test -f /usr/libexec/ld.so; then
+ hardcode_direct=yes
+ hardcode_shlibpath_var=no
+ hardcode_direct_absolute=yes
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then
+ archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags $wl-retain-symbols-file,$export_symbols'
+ hardcode_libdir_flag_spec='$wl-rpath,$libdir'
+ export_dynamic_flag_spec='$wl-E'
+ else
+ archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ hardcode_libdir_flag_spec='$wl-rpath,$libdir'
+ fi
+ else
+ ld_shlibs=no
+ fi
+ ;;
+
+ os2*)
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_minus_L=yes
+ allow_undefined_flag=unsupported
+ shrext_cmds=.dll
+ archive_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+ $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+ $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+ $ECHO EXPORTS >> $output_objdir/$libname.def~
+ emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~
+ $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+ emximp -o $lib $output_objdir/$libname.def'
+ archive_expsym_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+ $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+ $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+ $ECHO EXPORTS >> $output_objdir/$libname.def~
+ prefix_cmds="$SED"~
+ if test EXPORTS = "`$SED 1q $export_symbols`"; then
+ prefix_cmds="$prefix_cmds -e 1d";
+ fi~
+ prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~
+ cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~
+ $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+ emximp -o $lib $output_objdir/$libname.def'
+ old_archive_From_new_cmds='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def'
+ enable_shared_with_static_runtimes=yes
+ ;;
+
+ osf3*)
+ if test yes = "$GCC"; then
+ allow_undefined_flag=' $wl-expect_unresolved $wl\*'
+ archive_cmds='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
+ else
+ allow_undefined_flag=' -expect_unresolved \*'
+ archive_cmds='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
+ fi
+ archive_cmds_need_lc='no'
+ hardcode_libdir_flag_spec='$wl-rpath $wl$libdir'
+ hardcode_libdir_separator=:
+ ;;
+
+ osf4* | osf5*) # as osf3* with the addition of -msym flag
+ if test yes = "$GCC"; then
+ allow_undefined_flag=' $wl-expect_unresolved $wl\*'
+ archive_cmds='$CC -shared$allow_undefined_flag $pic_flag $libobjs $deplibs $compiler_flags $wl-msym $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
+ hardcode_libdir_flag_spec='$wl-rpath $wl$libdir'
+ else
+ allow_undefined_flag=' -expect_unresolved \*'
+ archive_cmds='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
+ archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
+ $CC -shared$allow_undefined_flag $wl-input $wl$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib~$RM $lib.exp'
+
+ # Both c and cxx compiler support -rpath directly
+ hardcode_libdir_flag_spec='-rpath $libdir'
+ fi
+ archive_cmds_need_lc='no'
+ hardcode_libdir_separator=:
+ ;;
+
+ solaris*)
+ no_undefined_flag=' -z defs'
+ if test yes = "$GCC"; then
+ wlarc='$wl'
+ archive_cmds='$CC -shared $pic_flag $wl-z ${wl}text $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $CC -shared $pic_flag $wl-z ${wl}text $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+ else
+ case `$CC -V 2>&1` in
+ *"Compilers 5.0"*)
+ wlarc=''
+ archive_cmds='$LD -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $LD -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
+ ;;
+ *)
+ wlarc='$wl'
+ archive_cmds='$CC -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $CC -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+ ;;
+ esac
+ fi
+ hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_shlibpath_var=no
+ case $host_os in
+ solaris2.[0-5] | solaris2.[0-5].*) ;;
+ *)
+ # The compiler driver will combine and reorder linker options,
+ # but understands '-z linker_flag'. GCC discards it without '$wl',
+ # but is careful enough not to reorder.
+ # Supported since Solaris 2.6 (maybe 2.5.1?)
+ if test yes = "$GCC"; then
+ whole_archive_flag_spec='$wl-z ${wl}allextract$convenience $wl-z ${wl}defaultextract'
+ else
+ whole_archive_flag_spec='-z allextract$convenience -z defaultextract'
+ fi
+ ;;
+ esac
+ link_all_deplibs=yes
+ ;;
+
+ sunos4*)
+ if test sequent = "$host_vendor"; then
+ # Use $CC to link under sequent, because it throws in some extra .o
+ # files that make .init and .fini sections work.
+ archive_cmds='$CC -G $wl-h $soname -o $lib $libobjs $deplibs $compiler_flags'
+ else
+ archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
+ fi
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_direct=yes
+ hardcode_minus_L=yes
+ hardcode_shlibpath_var=no
+ ;;
+
+ sysv4)
+ case $host_vendor in
+ sni)
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_direct=yes # is this really true???
+ ;;
+ siemens)
+ ## LD is ld it makes a PLAMLIB
+ ## CC just makes a GrossModule.
+ archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags'
+ reload_cmds='$CC -r -o $output$reload_objs'
+ hardcode_direct=no
+ ;;
+ motorola)
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_direct=no #Motorola manual says yes, but my tests say they lie
+ ;;
+ esac
+ runpath_var='LD_RUN_PATH'
+ hardcode_shlibpath_var=no
+ ;;
+
+ sysv4.3*)
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_shlibpath_var=no
+ export_dynamic_flag_spec='-Bexport'
+ ;;
+
+ sysv4*MP*)
+ if test -d /usr/nec; then
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_shlibpath_var=no
+ runpath_var=LD_RUN_PATH
+ hardcode_runpath_var=yes
+ ld_shlibs=yes
+ fi
+ ;;
+
+ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
+ no_undefined_flag='$wl-z,text'
+ archive_cmds_need_lc=no
+ hardcode_shlibpath_var=no
+ runpath_var='LD_RUN_PATH'
+
+ if test yes = "$GCC"; then
+ archive_cmds='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ else
+ archive_cmds='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ fi
+ ;;
+
+ sysv5* | sco3.2v5* | sco5v6*)
+ # Note: We CANNOT use -z defs as we might desire, because we do not
+ # link with -lc, and that would cause any symbols used from libc to
+ # always be unresolved, which means just about no library would
+ # ever link correctly. If we're not using GNU ld we use -z text
+ # though, which does catch some bad symbols but isn't as heavy-handed
+ # as -z defs.
+ no_undefined_flag='$wl-z,text'
+ allow_undefined_flag='$wl-z,nodefs'
+ archive_cmds_need_lc=no
+ hardcode_shlibpath_var=no
+ hardcode_libdir_flag_spec='$wl-R,$libdir'
+ hardcode_libdir_separator=':'
+ link_all_deplibs=yes
+ export_dynamic_flag_spec='$wl-Bexport'
+ runpath_var='LD_RUN_PATH'
+
+ if test yes = "$GCC"; then
+ archive_cmds='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ else
+ archive_cmds='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ fi
+ ;;
+
+ uts4*)
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_shlibpath_var=no
+ ;;
+
+ *)
+ ld_shlibs=no
+ ;;
+ esac
+
+ if test sni = "$host_vendor"; then
+ case $host in
+ sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+ export_dynamic_flag_spec='$wl-Blargedynsym'
+ ;;
+ esac
+ fi
+ fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs" >&5
+$as_echo "$ld_shlibs" >&6; }
+test no = "$ld_shlibs" && can_build_shared=no
+
+with_gnu_ld=$with_gnu_ld
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+#
+# Do we need to explicitly link libc?
+#
+case "x$archive_cmds_need_lc" in
+x|xyes)
+ # Assume -lc should be added
+ archive_cmds_need_lc=yes
+
+ if test yes,yes = "$GCC,$enable_shared"; then
+ case $archive_cmds in
+ *'~'*)
+ # FIXME: we may have to deal with multi-command sequences.
+ ;;
+ '$CC '*)
+ # Test whether the compiler implicitly links with -lc since on some
+ # systems, -lgcc has to come before -lc. If gcc already passes -lc
+ # to ld, don't add -lc before -lgcc.
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5
+$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; }
+if ${lt_cv_archive_cmds_need_lc+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ $RM conftest*
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } 2>conftest.err; then
+ soname=conftest
+ lib=conftest
+ libobjs=conftest.$ac_objext
+ deplibs=
+ wl=$lt_prog_compiler_wl
+ pic_flag=$lt_prog_compiler_pic
+ compiler_flags=-v
+ linker_flags=-v
+ verstring=
+ output_objdir=.
+ libname=conftest
+ lt_save_allow_undefined_flag=$allow_undefined_flag
+ allow_undefined_flag=
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5
+ (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }
+ then
+ lt_cv_archive_cmds_need_lc=no
+ else
+ lt_cv_archive_cmds_need_lc=yes
+ fi
+ allow_undefined_flag=$lt_save_allow_undefined_flag
+ else
+ cat conftest.err 1>&5
+ fi
+ $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_archive_cmds_need_lc" >&5
+$as_echo "$lt_cv_archive_cmds_need_lc" >&6; }
+ archive_cmds_need_lc=$lt_cv_archive_cmds_need_lc
+ ;;
+ esac
+ fi
+ ;;
+esac
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5
+$as_echo_n "checking dynamic linker characteristics... " >&6; }
+
+if test yes = "$GCC"; then
+ case $host_os in
+ darwin*) lt_awk_arg='/^libraries:/,/LR/' ;;
+ *) lt_awk_arg='/^libraries:/' ;;
+ esac
+ case $host_os in
+ mingw* | cegcc*) lt_sed_strip_eq='s|=\([A-Za-z]:\)|\1|g' ;;
+ *) lt_sed_strip_eq='s|=/|/|g' ;;
+ esac
+ lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq`
+ case $lt_search_path_spec in
+ *\;*)
+ # if the path contains ";" then we assume it to be the separator
+ # otherwise default to the standard path separator (i.e. ":") - it is
+ # assumed that no part of a normal pathname contains ";" but that should
+ # okay in the real world where ";" in dirpaths is itself problematic.
+ lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'`
+ ;;
+ *)
+ lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"`
+ ;;
+ esac
+ # Ok, now we have the path, separated by spaces, we can step through it
+ # and add multilib dir if necessary...
+ lt_tmp_lt_search_path_spec=
+ lt_multi_os_dir=/`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
+ # ...but if some path component already ends with the multilib dir we assume
+ # that all is fine and trust -print-search-dirs as is (GCC 4.2? or newer).
+ case "$lt_multi_os_dir; $lt_search_path_spec " in
+ "/; "* | "/.; "* | "/./; "* | *"$lt_multi_os_dir "* | *"$lt_multi_os_dir/ "*)
+ lt_multi_os_dir=
+ ;;
+ esac
+ for lt_sys_path in $lt_search_path_spec; do
+ if test -d "$lt_sys_path$lt_multi_os_dir"; then
+ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path$lt_multi_os_dir"
+ elif test -n "$lt_multi_os_dir"; then
+ test -d "$lt_sys_path" && \
+ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
+ fi
+ done
+ lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk '
+BEGIN {RS = " "; FS = "/|\n";} {
+ lt_foo = "";
+ lt_count = 0;
+ for (lt_i = NF; lt_i > 0; lt_i--) {
+ if ($lt_i != "" && $lt_i != ".") {
+ if ($lt_i == "..") {
+ lt_count++;
+ } else {
+ if (lt_count == 0) {
+ lt_foo = "/" $lt_i lt_foo;
+ } else {
+ lt_count--;
+ }
+ }
+ }
+ }
+ if (lt_foo != "") { lt_freq[lt_foo]++; }
+ if (lt_freq[lt_foo] == 1) { print lt_foo; }
+}'`
+ # AWK program above erroneously prepends '/' to C:/dos/paths
+ # for these hosts.
+ case $host_os in
+ mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\
+ $SED 's|/\([A-Za-z]:\)|\1|g'` ;;
+ esac
+ sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP`
+else
+ sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+fi
+library_names_spec=
+libname_spec='lib$name'
+soname_spec=
+shrext_cmds=.so
+postinstall_cmds=
+postuninstall_cmds=
+finish_cmds=
+finish_eval=
+shlibpath_var=
+shlibpath_overrides_runpath=unknown
+version_type=none
+dynamic_linker="$host_os ld.so"
+sys_lib_dlsearch_path_spec="/lib /usr/lib"
+need_lib_prefix=unknown
+hardcode_into_libs=no
+
+# when you set need_version to no, make sure it does not cause -set_version
+# flags to be left without arguments
+need_version=unknown
+
+
+
+case $host_os in
+aix3*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ library_names_spec='$libname$release$shared_ext$versuffix $libname.a'
+ shlibpath_var=LIBPATH
+
+ # AIX 3 has no versioning support, so we append a major version to the name.
+ soname_spec='$libname$release$shared_ext$major'
+ ;;
+
+aix[4-9]*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_lib_prefix=no
+ need_version=no
+ hardcode_into_libs=yes
+ if test ia64 = "$host_cpu"; then
+ # AIX 5 supports IA64
+ library_names_spec='$libname$release$shared_ext$major $libname$release$shared_ext$versuffix $libname$shared_ext'
+ shlibpath_var=LD_LIBRARY_PATH
+ else
+ # With GCC up to 2.95.x, collect2 would create an import file
+ # for dependence libraries. The import file would start with
+ # the line '#! .'. This would cause the generated library to
+ # depend on '.', always an invalid library. This was fixed in
+ # development snapshots of GCC prior to 3.0.
+ case $host_os in
+ aix4 | aix4.[01] | aix4.[01].*)
+ if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
+ echo ' yes '
+ echo '#endif'; } | $CC -E - | $GREP yes > /dev/null; then
+ :
+ else
+ can_build_shared=no
+ fi
+ ;;
+ esac
+ # Using Import Files as archive members, it is possible to support
+ # filename-based versioning of shared library archives on AIX. While
+ # this would work for both with and without runtime linking, it will
+ # prevent static linking of such archives. So we do filename-based
+ # shared library versioning with .so extension only, which is used
+ # when both runtime linking and shared linking is enabled.
+ # Unfortunately, runtime linking may impact performance, so we do
+ # not want this to be the default eventually. Also, we use the
+ # versioned .so libs for executables only if there is the -brtl
+ # linker flag in LDFLAGS as well, or --with-aix-soname=svr4 only.
+ # To allow for filename-based versioning support, we need to create
+ # libNAME.so.V as an archive file, containing:
+ # *) an Import File, referring to the versioned filename of the
+ # archive as well as the shared archive member, telling the
+ # bitwidth (32 or 64) of that shared object, and providing the
+ # list of exported symbols of that shared object, eventually
+ # decorated with the 'weak' keyword
+ # *) the shared object with the F_LOADONLY flag set, to really avoid
+ # it being seen by the linker.
+ # At run time we better use the real file rather than another symlink,
+ # but for link time we create the symlink libNAME.so -> libNAME.so.V
+
+ case $with_aix_soname,$aix_use_runtimelinking in
+ # AIX (on Power*) has no versioning support, so currently we cannot hardcode correct
+ # soname into executable. Probably we can add versioning support to
+ # collect2, so additional links can be useful in future.
+ aix,yes) # traditional libtool
+ dynamic_linker='AIX unversionable lib.so'
+ # If using run time linking (on AIX 4.2 or later) use lib<name>.so
+ # instead of lib<name>.a to let people know that these are not
+ # typical AIX shared libraries.
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ ;;
+ aix,no) # traditional AIX only
+ dynamic_linker='AIX lib.a(lib.so.V)'
+ # We preserve .a as extension for shared libraries through AIX4.2
+ # and later when we are not doing run time linking.
+ library_names_spec='$libname$release.a $libname.a'
+ soname_spec='$libname$release$shared_ext$major'
+ ;;
+ svr4,*) # full svr4 only
+ dynamic_linker="AIX lib.so.V($shared_archive_member_spec.o)"
+ library_names_spec='$libname$release$shared_ext$major $libname$shared_ext'
+ # We do not specify a path in Import Files, so LIBPATH fires.
+ shlibpath_overrides_runpath=yes
+ ;;
+ *,yes) # both, prefer svr4
+ dynamic_linker="AIX lib.so.V($shared_archive_member_spec.o), lib.a(lib.so.V)"
+ library_names_spec='$libname$release$shared_ext$major $libname$shared_ext'
+ # unpreferred sharedlib libNAME.a needs extra handling
+ postinstall_cmds='test -n "$linkname" || linkname="$realname"~func_stripname "" ".so" "$linkname"~$install_shared_prog "$dir/$func_stripname_result.$libext" "$destdir/$func_stripname_result.$libext"~test -z "$tstripme" || test -z "$striplib" || $striplib "$destdir/$func_stripname_result.$libext"'
+ postuninstall_cmds='for n in $library_names $old_library; do :; done~func_stripname "" ".so" "$n"~test "$func_stripname_result" = "$n" || func_append rmfiles " $odir/$func_stripname_result.$libext"'
+ # We do not specify a path in Import Files, so LIBPATH fires.
+ shlibpath_overrides_runpath=yes
+ ;;
+ *,no) # both, prefer aix
+ dynamic_linker="AIX lib.a(lib.so.V), lib.so.V($shared_archive_member_spec.o)"
+ library_names_spec='$libname$release.a $libname.a'
+ soname_spec='$libname$release$shared_ext$major'
+ # unpreferred sharedlib libNAME.so.V and symlink libNAME.so need extra handling
+ postinstall_cmds='test -z "$dlname" || $install_shared_prog $dir/$dlname $destdir/$dlname~test -z "$tstripme" || test -z "$striplib" || $striplib $destdir/$dlname~test -n "$linkname" || linkname=$realname~func_stripname "" ".a" "$linkname"~(cd "$destdir" && $LN_S -f $dlname $func_stripname_result.so)'
+ postuninstall_cmds='test -z "$dlname" || func_append rmfiles " $odir/$dlname"~for n in $old_library $library_names; do :; done~func_stripname "" ".a" "$n"~func_append rmfiles " $odir/$func_stripname_result.so"'
+ ;;
+ esac
+ shlibpath_var=LIBPATH
+ fi
+ ;;
+
+amigaos*)
+ case $host_cpu in
+ powerpc)
+ # Since July 2007 AmigaOS4 officially supports .so libraries.
+ # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ ;;
+ m68k)
+ library_names_spec='$libname.ixlibrary $libname.a'
+ # Create ${libname}_ixlibrary.a entries in /sys/libs.
+ finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+ ;;
+ esac
+ ;;
+
+beos*)
+ library_names_spec='$libname$shared_ext'
+ dynamic_linker="$host_os ld.so"
+ shlibpath_var=LIBRARY_PATH
+ ;;
+
+bsdi[45]*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_version=no
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
+ sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
+ # the default ld.so.conf also contains /usr/contrib/lib and
+ # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
+ # libtool to hard-code these into programs
+ ;;
+
+cygwin* | mingw* | pw32* | cegcc*)
+ version_type=windows
+ shrext_cmds=.dll
+ need_version=no
+ need_lib_prefix=no
+
+ case $GCC,$cc_basename in
+ yes,*)
+ # gcc
+ library_names_spec='$libname.dll.a'
+ # DLL is installed to $(libdir)/../bin by postinstall_cmds
+ postinstall_cmds='base_file=`basename \$file`~
+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~
+ dldir=$destdir/`dirname \$dlpath`~
+ test -d \$dldir || mkdir -p \$dldir~
+ $install_prog $dir/$dlname \$dldir/$dlname~
+ chmod a+x \$dldir/$dlname~
+ if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+ eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+ fi'
+ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+ dlpath=$dir/\$dldll~
+ $RM \$dlpath'
+ shlibpath_overrides_runpath=yes
+
+ case $host_os in
+ cygwin*)
+ # Cygwin DLLs use 'cyg' prefix rather than 'lib'
+ soname_spec='`echo $libname | sed -e 's/^lib/cyg/'``echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext'
+
+ sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"
+ ;;
+ mingw* | cegcc*)
+ # MinGW DLLs use traditional 'lib' prefix
+ soname_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext'
+ ;;
+ pw32*)
+ # pw32 DLLs use 'pw' prefix rather than 'lib'
+ library_names_spec='`echo $libname | sed -e 's/^lib/pw/'``echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext'
+ ;;
+ esac
+ dynamic_linker='Win32 ld.exe'
+ ;;
+
+ *,cl*)
+ # Native MSVC
+ libname_spec='$name'
+ soname_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext'
+ library_names_spec='$libname.dll.lib'
+
+ case $build_os in
+ mingw*)
+ sys_lib_search_path_spec=
+ lt_save_ifs=$IFS
+ IFS=';'
+ for lt_path in $LIB
+ do
+ IFS=$lt_save_ifs
+ # Let DOS variable expansion print the short 8.3 style file name.
+ lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"`
+ sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path"
+ done
+ IFS=$lt_save_ifs
+ # Convert to MSYS style.
+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'`
+ ;;
+ cygwin*)
+ # Convert to unix form, then to dos form, then back to unix form
+ # but this time dos style (no spaces!) so that the unix form looks
+ # like /cygdrive/c/PROGRA~1:/cygdr...
+ sys_lib_search_path_spec=`cygpath --path --unix "$LIB"`
+ sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null`
+ sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+ ;;
+ *)
+ sys_lib_search_path_spec=$LIB
+ if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then
+ # It is most probably a Windows format PATH.
+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+ else
+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+ fi
+ # FIXME: find the short name or the path components, as spaces are
+ # common. (e.g. "Program Files" -> "PROGRA~1")
+ ;;
+ esac
+
+ # DLL is installed to $(libdir)/../bin by postinstall_cmds
+ postinstall_cmds='base_file=`basename \$file`~
+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~
+ dldir=$destdir/`dirname \$dlpath`~
+ test -d \$dldir || mkdir -p \$dldir~
+ $install_prog $dir/$dlname \$dldir/$dlname'
+ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+ dlpath=$dir/\$dldll~
+ $RM \$dlpath'
+ shlibpath_overrides_runpath=yes
+ dynamic_linker='Win32 link.exe'
+ ;;
+
+ *)
+ # Assume MSVC wrapper
+ library_names_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext $libname.lib'
+ dynamic_linker='Win32 ld.exe'
+ ;;
+ esac
+ # FIXME: first we should search . and the directory the executable is in
+ shlibpath_var=PATH
+ ;;
+
+darwin* | rhapsody*)
+ dynamic_linker="$host_os dyld"
+ version_type=darwin
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='$libname$release$major$shared_ext $libname$shared_ext'
+ soname_spec='$libname$release$major$shared_ext'
+ shlibpath_overrides_runpath=yes
+ shlibpath_var=DYLD_LIBRARY_PATH
+ shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
+
+ sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"
+ sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
+ ;;
+
+dgux*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ ;;
+
+freebsd* | dragonfly*)
+ # DragonFly does not have aout. When/if they implement a new
+ # versioning mechanism, adjust this.
+ if test -x /usr/bin/objformat; then
+ objformat=`/usr/bin/objformat`
+ else
+ case $host_os in
+ freebsd[23].*) objformat=aout ;;
+ *) objformat=elf ;;
+ esac
+ fi
+ version_type=freebsd-$objformat
+ case $version_type in
+ freebsd-elf*)
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
+ need_version=no
+ need_lib_prefix=no
+ ;;
+ freebsd-*)
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
+ need_version=yes
+ ;;
+ esac
+ shlibpath_var=LD_LIBRARY_PATH
+ case $host_os in
+ freebsd2.*)
+ shlibpath_overrides_runpath=yes
+ ;;
+ freebsd3.[01]* | freebsdelf3.[01]*)
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ ;;
+ freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
+ freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ ;;
+ *) # from 4.6 on, and DragonFly
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ ;;
+ esac
+ ;;
+
+haiku*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_lib_prefix=no
+ need_version=no
+ dynamic_linker="$host_os runtime_loader"
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
+ shlibpath_var=LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
+ hardcode_into_libs=yes
+ ;;
+
+hpux9* | hpux10* | hpux11*)
+ # Give a soname corresponding to the major version so that dld.sl refuses to
+ # link against other versions.
+ version_type=sunos
+ need_lib_prefix=no
+ need_version=no
+ case $host_cpu in
+ ia64*)
+ shrext_cmds='.so'
+ hardcode_into_libs=yes
+ dynamic_linker="$host_os dld.so"
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
+ if test 32 = "$HPUX_IA64_MODE"; then
+ sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+ sys_lib_dlsearch_path_spec=/usr/lib/hpux32
+ else
+ sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+ sys_lib_dlsearch_path_spec=/usr/lib/hpux64
+ fi
+ ;;
+ hppa*64*)
+ shrext_cmds='.sl'
+ hardcode_into_libs=yes
+ dynamic_linker="$host_os dld.sl"
+ shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
+ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
+ sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+ ;;
+ *)
+ shrext_cmds='.sl'
+ dynamic_linker="$host_os dld.sl"
+ shlibpath_var=SHLIB_PATH
+ shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
+ ;;
+ esac
+ # HP-UX runs *really* slowly unless shared libraries are mode 555, ...
+ postinstall_cmds='chmod 555 $lib'
+ # or fails outright, so override atomically:
+ install_override_mode=555
+ ;;
+
+interix[3-9]*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
+ dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ ;;
+
+irix5* | irix6* | nonstopux*)
+ case $host_os in
+ nonstopux*) version_type=nonstopux ;;
+ *)
+ if test yes = "$lt_cv_prog_gnu_ld"; then
+ version_type=linux # correct to gnu/linux during the next big refactor
+ else
+ version_type=irix
+ fi ;;
+ esac
+ need_lib_prefix=no
+ need_version=no
+ soname_spec='$libname$release$shared_ext$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$release$shared_ext $libname$shared_ext'
+ case $host_os in
+ irix5* | nonstopux*)
+ libsuff= shlibsuff=
+ ;;
+ *)
+ case $LD in # libtool.m4 will add one of these switches to LD
+ *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
+ libsuff= shlibsuff= libmagic=32-bit;;
+ *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
+ libsuff=32 shlibsuff=N32 libmagic=N32;;
+ *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
+ libsuff=64 shlibsuff=64 libmagic=64-bit;;
+ *) libsuff= shlibsuff= libmagic=never-match;;
+ esac
+ ;;
+ esac
+ shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
+ shlibpath_overrides_runpath=no
+ sys_lib_search_path_spec="/usr/lib$libsuff /lib$libsuff /usr/local/lib$libsuff"
+ sys_lib_dlsearch_path_spec="/usr/lib$libsuff /lib$libsuff"
+ hardcode_into_libs=yes
+ ;;
+
+# No shared lib support for Linux oldld, aout, or coff.
+linux*oldld* | linux*aout* | linux*coff*)
+ dynamic_linker=no
+ ;;
+
+linux*android*)
+ version_type=none # Android doesn't support versioned libraries.
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='$libname$release$shared_ext'
+ soname_spec='$libname$release$shared_ext'
+ finish_cmds=
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+
+ # This implies no fast_install, which is unacceptable.
+ # Some rework will be needed to allow for fast_install
+ # before this can be enabled.
+ hardcode_into_libs=yes
+
+ dynamic_linker='Android linker'
+ # Don't embed -rpath directories since the linker doesn't support them.
+ hardcode_libdir_flag_spec='-L$libdir'
+ ;;
+
+# This must be glibc/ELF.
+linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+
+ # Some binutils ld are patched to set DT_RUNPATH
+ if ${lt_cv_shlibpath_overrides_runpath+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_shlibpath_overrides_runpath=no
+ save_LDFLAGS=$LDFLAGS
+ save_libdir=$libdir
+ eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \
+ LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\""
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then :
+ lt_cv_shlibpath_overrides_runpath=yes
+fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ LDFLAGS=$save_LDFLAGS
+ libdir=$save_libdir
+
+fi
+
+ shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath
+
+ # This implies no fast_install, which is unacceptable.
+ # Some rework will be needed to allow for fast_install
+ # before this can be enabled.
+ hardcode_into_libs=yes
+
+ # Ideally, we could use ldconfig to report *all* directores which are
+ # searched for libraries, however this is still not possible. Aside from not
+ # being certain /sbin/ldconfig is available, command
+ # 'ldconfig -N -X -v | grep ^/' on 64bit Fedora does not report /usr/lib64,
+ # even though it is searched at run-time. Try to do the best guess by
+ # appending ld.so.conf contents (and includes) to the search path.
+ if test -f /etc/ld.so.conf; then
+ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
+ sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
+ fi
+
+ # We used to test for /lib/ld.so.1 and disable shared libraries on
+ # powerpc, because MkLinux only supported shared libraries with the
+ # GNU dynamic linker. Since this was broken with cross compilers,
+ # most powerpc-linux boxes support dynamic linking these days and
+ # people can always --disable-shared, the test was removed, and we
+ # assume the GNU/Linux dynamic linker is in use.
+ dynamic_linker='GNU/Linux ld.so'
+ ;;
+
+netbsd*)
+ version_type=sunos
+ need_lib_prefix=no
+ need_version=no
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+ dynamic_linker='NetBSD (a.out) ld.so'
+ else
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
+ dynamic_linker='NetBSD ld.elf_so'
+ fi
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ ;;
+
+newsos6)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ ;;
+
+*nto* | *qnx*)
+ version_type=qnx
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ dynamic_linker='ldqnx.so'
+ ;;
+
+openbsd* | bitrig*)
+ version_type=sunos
+ sys_lib_dlsearch_path_spec=/usr/lib
+ need_lib_prefix=no
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then
+ need_version=no
+ else
+ need_version=yes
+ fi
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ ;;
+
+os2*)
+ libname_spec='$name'
+ version_type=windows
+ shrext_cmds=.dll
+ need_version=no
+ need_lib_prefix=no
+ # OS/2 can only load a DLL with a base name of 8 characters or less.
+ soname_spec='`test -n "$os2dllname" && libname="$os2dllname";
+ v=$($ECHO $release$versuffix | tr -d .-);
+ n=$($ECHO $libname | cut -b -$((8 - ${#v})) | tr . _);
+ $ECHO $n$v`$shared_ext'
+ library_names_spec='${libname}_dll.$libext'
+ dynamic_linker='OS/2 ld.exe'
+ shlibpath_var=BEGINLIBPATH
+ sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+ postinstall_cmds='base_file=`basename \$file`~
+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; $ECHO \$dlname'\''`~
+ dldir=$destdir/`dirname \$dlpath`~
+ test -d \$dldir || mkdir -p \$dldir~
+ $install_prog $dir/$dlname \$dldir/$dlname~
+ chmod a+x \$dldir/$dlname~
+ if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+ eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+ fi'
+ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; $ECHO \$dlname'\''`~
+ dlpath=$dir/\$dldll~
+ $RM \$dlpath'
+ ;;
+
+osf3* | osf4* | osf5*)
+ version_type=osf
+ need_lib_prefix=no
+ need_version=no
+ soname_spec='$libname$release$shared_ext$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ shlibpath_var=LD_LIBRARY_PATH
+ sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+ ;;
+
+rdos*)
+ dynamic_linker=no
+ ;;
+
+solaris*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ # ldd complains unless libraries are executable
+ postinstall_cmds='chmod +x $lib'
+ ;;
+
+sunos4*)
+ version_type=sunos
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
+ finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ if test yes = "$with_gnu_ld"; then
+ need_lib_prefix=no
+ fi
+ need_version=yes
+ ;;
+
+sysv4 | sysv4.3*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ case $host_vendor in
+ sni)
+ shlibpath_overrides_runpath=no
+ need_lib_prefix=no
+ runpath_var=LD_RUN_PATH
+ ;;
+ siemens)
+ need_lib_prefix=no
+ ;;
+ motorola)
+ need_lib_prefix=no
+ need_version=no
+ shlibpath_overrides_runpath=no
+ sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
+ ;;
+ esac
+ ;;
+
+sysv4*MP*)
+ if test -d /usr/nec; then
+ version_type=linux # correct to gnu/linux during the next big refactor
+ library_names_spec='$libname$shared_ext.$versuffix $libname$shared_ext.$major $libname$shared_ext'
+ soname_spec='$libname$shared_ext.$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ fi
+ ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+ version_type=sco
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ if test yes = "$with_gnu_ld"; then
+ sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
+ else
+ sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
+ case $host_os in
+ sco3.2v5*)
+ sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
+ ;;
+ esac
+ fi
+ sys_lib_dlsearch_path_spec='/usr/lib'
+ ;;
+
+tpf*)
+ # TPF is a cross-target only. Preferred cross-host = GNU/Linux.
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ ;;
+
+uts4*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ ;;
+
+*)
+ dynamic_linker=no
+ ;;
+esac
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5
+$as_echo "$dynamic_linker" >&6; }
+test no = "$dynamic_linker" && can_build_shared=no
+
+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+if test yes = "$GCC"; then
+ variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+fi
+
+if test set = "${lt_cv_sys_lib_search_path_spec+set}"; then
+ sys_lib_search_path_spec=$lt_cv_sys_lib_search_path_spec
+fi
+
+if test set = "${lt_cv_sys_lib_dlsearch_path_spec+set}"; then
+ sys_lib_dlsearch_path_spec=$lt_cv_sys_lib_dlsearch_path_spec
+fi
+
+# remember unaugmented sys_lib_dlsearch_path content for libtool script decls...
+configure_time_dlsearch_path=$sys_lib_dlsearch_path_spec
+
+# ... but it needs LT_SYS_LIBRARY_PATH munging for other configure-time code
+func_munge_path_list sys_lib_dlsearch_path_spec "$LT_SYS_LIBRARY_PATH"
+
+# to be used as default LT_SYS_LIBRARY_PATH value in generated libtool
+configure_time_lt_sys_library_path=$LT_SYS_LIBRARY_PATH
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5
+$as_echo_n "checking how to hardcode library paths into programs... " >&6; }
+hardcode_action=
+if test -n "$hardcode_libdir_flag_spec" ||
+ test -n "$runpath_var" ||
+ test yes = "$hardcode_automatic"; then
+
+ # We can hardcode non-existent directories.
+ if test no != "$hardcode_direct" &&
+ # If the only mechanism to avoid hardcoding is shlibpath_var, we
+ # have to relink, otherwise we might link with an installed library
+ # when we should be linking with a yet-to-be-installed one
+ ## test no != "$_LT_TAGVAR(hardcode_shlibpath_var, )" &&
+ test no != "$hardcode_minus_L"; then
+ # Linking always hardcodes the temporary library directory.
+ hardcode_action=relink
+ else
+ # We can link without hardcoding, and we can hardcode nonexisting dirs.
+ hardcode_action=immediate
+ fi
+else
+ # We cannot hardcode anything, or else we can only hardcode existing
+ # directories.
+ hardcode_action=unsupported
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action" >&5
+$as_echo "$hardcode_action" >&6; }
+
+if test relink = "$hardcode_action" ||
+ test yes = "$inherit_rpath"; then
+ # Fast installation is not supported
+ enable_fast_install=no
+elif test yes = "$shlibpath_overrides_runpath" ||
+ test no = "$enable_shared"; then
+ # Fast installation is not necessary
+ enable_fast_install=needless
+fi
+
+
+
+
+
+
+ if test yes != "$enable_dlopen"; then
+ enable_dlopen=unknown
+ enable_dlopen_self=unknown
+ enable_dlopen_self_static=unknown
+else
+ lt_cv_dlopen=no
+ lt_cv_dlopen_libs=
+
+ case $host_os in
+ beos*)
+ lt_cv_dlopen=load_add_on
+ lt_cv_dlopen_libs=
+ lt_cv_dlopen_self=yes
+ ;;
+
+ mingw* | pw32* | cegcc*)
+ lt_cv_dlopen=LoadLibrary
+ lt_cv_dlopen_libs=
+ ;;
+
+ cygwin*)
+ lt_cv_dlopen=dlopen
+ lt_cv_dlopen_libs=
+ ;;
+
+ darwin*)
+ # if libdl is installed we need to link against it
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
+$as_echo_n "checking for dlopen in -ldl... " >&6; }
+if ${ac_cv_lib_dl_dlopen+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldl $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlopen ();
+int
+main ()
+{
+return dlopen ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ ac_cv_lib_dl_dlopen=yes
+else
+ ac_cv_lib_dl_dlopen=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
+$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
+if test "x$ac_cv_lib_dl_dlopen" = xyes; then :
+ lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl
+else
+
+ lt_cv_dlopen=dyld
+ lt_cv_dlopen_libs=
+ lt_cv_dlopen_self=yes
+
+fi
+
+ ;;
+
+ tpf*)
+ # Don't try to run any link tests for TPF. We know it's impossible
+ # because TPF is a cross-compiler, and we know how we open DSOs.
+ lt_cv_dlopen=dlopen
+ lt_cv_dlopen_libs=
+ lt_cv_dlopen_self=no
+ ;;
+
+ *)
+ ac_fn_c_check_func "$LINENO" "shl_load" "ac_cv_func_shl_load"
+if test "x$ac_cv_func_shl_load" = xyes; then :
+ lt_cv_dlopen=shl_load
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shl_load in -ldld" >&5
+$as_echo_n "checking for shl_load in -ldld... " >&6; }
+if ${ac_cv_lib_dld_shl_load+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldld $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char shl_load ();
+int
+main ()
+{
+return shl_load ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ ac_cv_lib_dld_shl_load=yes
+else
+ ac_cv_lib_dld_shl_load=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_shl_load" >&5
+$as_echo "$ac_cv_lib_dld_shl_load" >&6; }
+if test "x$ac_cv_lib_dld_shl_load" = xyes; then :
+ lt_cv_dlopen=shl_load lt_cv_dlopen_libs=-ldld
+else
+ ac_fn_c_check_func "$LINENO" "dlopen" "ac_cv_func_dlopen"
+if test "x$ac_cv_func_dlopen" = xyes; then :
+ lt_cv_dlopen=dlopen
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
+$as_echo_n "checking for dlopen in -ldl... " >&6; }
+if ${ac_cv_lib_dl_dlopen+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldl $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlopen ();
+int
+main ()
+{
+return dlopen ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ ac_cv_lib_dl_dlopen=yes
+else
+ ac_cv_lib_dl_dlopen=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
+$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
+if test "x$ac_cv_lib_dl_dlopen" = xyes; then :
+ lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -lsvld" >&5
+$as_echo_n "checking for dlopen in -lsvld... " >&6; }
+if ${ac_cv_lib_svld_dlopen+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-lsvld $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlopen ();
+int
+main ()
+{
+return dlopen ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ ac_cv_lib_svld_dlopen=yes
+else
+ ac_cv_lib_svld_dlopen=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_svld_dlopen" >&5
+$as_echo "$ac_cv_lib_svld_dlopen" >&6; }
+if test "x$ac_cv_lib_svld_dlopen" = xyes; then :
+ lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-lsvld
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dld_link in -ldld" >&5
+$as_echo_n "checking for dld_link in -ldld... " >&6; }
+if ${ac_cv_lib_dld_dld_link+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldld $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dld_link ();
+int
+main ()
+{
+return dld_link ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ ac_cv_lib_dld_dld_link=yes
+else
+ ac_cv_lib_dld_dld_link=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_dld_link" >&5
+$as_echo "$ac_cv_lib_dld_dld_link" >&6; }
+if test "x$ac_cv_lib_dld_dld_link" = xyes; then :
+ lt_cv_dlopen=dld_link lt_cv_dlopen_libs=-ldld
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
+ ;;
+ esac
+
+ if test no = "$lt_cv_dlopen"; then
+ enable_dlopen=no
+ else
+ enable_dlopen=yes
+ fi
+
+ case $lt_cv_dlopen in
+ dlopen)
+ save_CPPFLAGS=$CPPFLAGS
+ test yes = "$ac_cv_header_dlfcn_h" && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
+
+ save_LDFLAGS=$LDFLAGS
+ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
+
+ save_LIBS=$LIBS
+ LIBS="$lt_cv_dlopen_libs $LIBS"
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a program can dlopen itself" >&5
+$as_echo_n "checking whether a program can dlopen itself... " >&6; }
+if ${lt_cv_dlopen_self+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test yes = "$cross_compiling"; then :
+ lt_cv_dlopen_self=cross
+else
+ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+ lt_status=$lt_dlunknown
+ cat > conftest.$ac_ext <<_LT_EOF
+#line $LINENO "configure"
+#include "confdefs.h"
+
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
+
+#include <stdio.h>
+
+#ifdef RTLD_GLOBAL
+# define LT_DLGLOBAL RTLD_GLOBAL
+#else
+# ifdef DL_GLOBAL
+# define LT_DLGLOBAL DL_GLOBAL
+# else
+# define LT_DLGLOBAL 0
+# endif
+#endif
+
+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
+ find out it does not work in some platform. */
+#ifndef LT_DLLAZY_OR_NOW
+# ifdef RTLD_LAZY
+# define LT_DLLAZY_OR_NOW RTLD_LAZY
+# else
+# ifdef DL_LAZY
+# define LT_DLLAZY_OR_NOW DL_LAZY
+# else
+# ifdef RTLD_NOW
+# define LT_DLLAZY_OR_NOW RTLD_NOW
+# else
+# ifdef DL_NOW
+# define LT_DLLAZY_OR_NOW DL_NOW
+# else
+# define LT_DLLAZY_OR_NOW 0
+# endif
+# endif
+# endif
+# endif
+#endif
+
+/* When -fvisibility=hidden is used, assume the code has been annotated
+ correspondingly for the symbols needed. */
+#if defined __GNUC__ && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+int fnord () __attribute__((visibility("default")));
+#endif
+
+int fnord () { return 42; }
+int main ()
+{
+ void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+ int status = $lt_dlunknown;
+
+ if (self)
+ {
+ if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
+ else
+ {
+ if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
+ else puts (dlerror ());
+ }
+ /* dlclose (self); */
+ }
+ else
+ puts (dlerror ());
+
+ return status;
+}
+_LT_EOF
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && test -s "conftest$ac_exeext" 2>/dev/null; then
+ (./conftest; exit; ) >&5 2>/dev/null
+ lt_status=$?
+ case x$lt_status in
+ x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;;
+ x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;;
+ x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;;
+ esac
+ else :
+ # compilation failed
+ lt_cv_dlopen_self=no
+ fi
+fi
+rm -fr conftest*
+
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self" >&5
+$as_echo "$lt_cv_dlopen_self" >&6; }
+
+ if test yes = "$lt_cv_dlopen_self"; then
+ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a statically linked program can dlopen itself" >&5
+$as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; }
+if ${lt_cv_dlopen_self_static+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test yes = "$cross_compiling"; then :
+ lt_cv_dlopen_self_static=cross
+else
+ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+ lt_status=$lt_dlunknown
+ cat > conftest.$ac_ext <<_LT_EOF
+#line $LINENO "configure"
+#include "confdefs.h"
+
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
+
+#include <stdio.h>
+
+#ifdef RTLD_GLOBAL
+# define LT_DLGLOBAL RTLD_GLOBAL
+#else
+# ifdef DL_GLOBAL
+# define LT_DLGLOBAL DL_GLOBAL
+# else
+# define LT_DLGLOBAL 0
+# endif
+#endif
+
+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
+ find out it does not work in some platform. */
+#ifndef LT_DLLAZY_OR_NOW
+# ifdef RTLD_LAZY
+# define LT_DLLAZY_OR_NOW RTLD_LAZY
+# else
+# ifdef DL_LAZY
+# define LT_DLLAZY_OR_NOW DL_LAZY
+# else
+# ifdef RTLD_NOW
+# define LT_DLLAZY_OR_NOW RTLD_NOW
+# else
+# ifdef DL_NOW
+# define LT_DLLAZY_OR_NOW DL_NOW
+# else
+# define LT_DLLAZY_OR_NOW 0
+# endif
+# endif
+# endif
+# endif
+#endif
+
+/* When -fvisibility=hidden is used, assume the code has been annotated
+ correspondingly for the symbols needed. */
+#if defined __GNUC__ && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+int fnord () __attribute__((visibility("default")));
+#endif
+
+int fnord () { return 42; }
+int main ()
+{
+ void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+ int status = $lt_dlunknown;
+
+ if (self)
+ {
+ if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
+ else
+ {
+ if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
+ else puts (dlerror ());
+ }
+ /* dlclose (self); */
+ }
+ else
+ puts (dlerror ());
+
+ return status;
+}
+_LT_EOF
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && test -s "conftest$ac_exeext" 2>/dev/null; then
+ (./conftest; exit; ) >&5 2>/dev/null
+ lt_status=$?
+ case x$lt_status in
+ x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;;
+ x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;;
+ x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;;
+ esac
+ else :
+ # compilation failed
+ lt_cv_dlopen_self_static=no
+ fi
+fi
+rm -fr conftest*
+
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self_static" >&5
+$as_echo "$lt_cv_dlopen_self_static" >&6; }
+ fi
+
+ CPPFLAGS=$save_CPPFLAGS
+ LDFLAGS=$save_LDFLAGS
+ LIBS=$save_LIBS
+ ;;
+ esac
+
+ case $lt_cv_dlopen_self in
+ yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
+ *) enable_dlopen_self=unknown ;;
+ esac
+
+ case $lt_cv_dlopen_self_static in
+ yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
+ *) enable_dlopen_self_static=unknown ;;
+ esac
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+striplib=
+old_striplib=
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether stripping libraries is possible" >&5
+$as_echo_n "checking whether stripping libraries is possible... " >&6; }
+if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then
+ test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
+ test -z "$striplib" && striplib="$STRIP --strip-unneeded"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+else
+# FIXME - insert some real tests, host_os isn't really good enough
+ case $host_os in
+ darwin*)
+ if test -n "$STRIP"; then
+ striplib="$STRIP -x"
+ old_striplib="$STRIP -S"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ fi
+ ;;
+ *)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ ;;
+ esac
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+ # Report what library types will actually be built
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if libtool supports shared libraries" >&5
+$as_echo_n "checking if libtool supports shared libraries... " >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $can_build_shared" >&5
+$as_echo "$can_build_shared" >&6; }
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build shared libraries" >&5
+$as_echo_n "checking whether to build shared libraries... " >&6; }
+ test no = "$can_build_shared" && enable_shared=no
+
+ # On AIX, shared libraries and static libraries use the same namespace, and
+ # are all built from PIC.
+ case $host_os in
+ aix3*)
+ test yes = "$enable_shared" && enable_static=no
+ if test -n "$RANLIB"; then
+ archive_cmds="$archive_cmds~\$RANLIB \$lib"
+ postinstall_cmds='$RANLIB $lib'
+ fi
+ ;;
+
+ aix[4-9]*)
+ if test ia64 != "$host_cpu"; then
+ case $enable_shared,$with_aix_soname,$aix_use_runtimelinking in
+ yes,aix,yes) ;; # shared object as lib.so file only
+ yes,svr4,*) ;; # shared object as lib.so archive member only
+ yes,*) enable_static=no ;; # shared object in lib.a archive as well
+ esac
+ fi
+ ;;
+ esac
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_shared" >&5
+$as_echo "$enable_shared" >&6; }
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build static libraries" >&5
+$as_echo_n "checking whether to build static libraries... " >&6; }
+ # Make sure either enable_shared or enable_static is yes.
+ test yes = "$enable_shared" || enable_static=yes
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_static" >&5
+$as_echo "$enable_static" >&6; }
+
+
+
+
+fi
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+CC=$lt_save_CC
+
+ if test -n "$CXX" && ( test no != "$CXX" &&
+ ( (test g++ = "$CXX" && `g++ -v >/dev/null 2>&1` ) ||
+ (test g++ != "$CXX"))); then
+ ac_ext=cpp
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C++ preprocessor" >&5
+$as_echo_n "checking how to run the C++ preprocessor... " >&6; }
+if test -z "$CXXCPP"; then
+ if ${ac_cv_prog_CXXCPP+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ # Double quotes because CXXCPP needs to be expanded
+ for CXXCPP in "$CXX -E" "/lib/cpp"
+ do
+ ac_preproc_ok=false
+for ac_cxx_preproc_warn_flag in '' yes
+do
+ # Use a header file that comes with gcc, so configuring glibc
+ # with a fresh cross-compiler works.
+ # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ # <limits.h> exists even on freestanding compilers.
+ # On the NeXT, cc -E runs the code through the compiler's parser,
+ # not just through cpp. "Syntax error" is here to catch this case.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+ Syntax error
+_ACEOF
+if ac_fn_cxx_try_cpp "$LINENO"; then :
+
+else
+ # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+ # OK, works on sane cases. Now check whether nonexistent headers
+ # can be detected and how.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <ac_nonexistent.h>
+_ACEOF
+if ac_fn_cxx_try_cpp "$LINENO"; then :
+ # Broken: success on invalid input.
+continue
+else
+ # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.i conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+ break
+fi
+
+ done
+ ac_cv_prog_CXXCPP=$CXXCPP
+
+fi
+ CXXCPP=$ac_cv_prog_CXXCPP
+else
+ ac_cv_prog_CXXCPP=$CXXCPP
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CXXCPP" >&5
+$as_echo "$CXXCPP" >&6; }
+ac_preproc_ok=false
+for ac_cxx_preproc_warn_flag in '' yes
+do
+ # Use a header file that comes with gcc, so configuring glibc
+ # with a fresh cross-compiler works.
+ # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ # <limits.h> exists even on freestanding compilers.
+ # On the NeXT, cc -E runs the code through the compiler's parser,
+ # not just through cpp. "Syntax error" is here to catch this case.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+ Syntax error
+_ACEOF
+if ac_fn_cxx_try_cpp "$LINENO"; then :
+
+else
+ # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+ # OK, works on sane cases. Now check whether nonexistent headers
+ # can be detected and how.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <ac_nonexistent.h>
+_ACEOF
+if ac_fn_cxx_try_cpp "$LINENO"; then :
+ # Broken: success on invalid input.
+continue
+else
+ # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.i conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+
+else
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "C++ preprocessor \"$CXXCPP\" fails sanity check
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+else
+ _lt_caught_CXX_error=yes
+fi
+
+ac_ext=cpp
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+
+archive_cmds_need_lc_CXX=no
+allow_undefined_flag_CXX=
+always_export_symbols_CXX=no
+archive_expsym_cmds_CXX=
+compiler_needs_object_CXX=no
+export_dynamic_flag_spec_CXX=
+hardcode_direct_CXX=no
+hardcode_direct_absolute_CXX=no
+hardcode_libdir_flag_spec_CXX=
+hardcode_libdir_separator_CXX=
+hardcode_minus_L_CXX=no
+hardcode_shlibpath_var_CXX=unsupported
+hardcode_automatic_CXX=no
+inherit_rpath_CXX=no
+module_cmds_CXX=
+module_expsym_cmds_CXX=
+link_all_deplibs_CXX=unknown
+old_archive_cmds_CXX=$old_archive_cmds
+reload_flag_CXX=$reload_flag
+reload_cmds_CXX=$reload_cmds
+no_undefined_flag_CXX=
+whole_archive_flag_spec_CXX=
+enable_shared_with_static_runtimes_CXX=no
+
+# Source file extension for C++ test sources.
+ac_ext=cpp
+
+# Object file extension for compiled C++ test sources.
+objext=o
+objext_CXX=$objext
+
+# No sense in running all these tests if we already determined that
+# the CXX compiler isn't working. Some variables (like enable_shared)
+# are currently assumed to apply to all compilers on this platform,
+# and will be corrupted by setting them based on a non-working compiler.
+if test yes != "$_lt_caught_CXX_error"; then
+ # Code to be used in simple compile tests
+ lt_simple_compile_test_code="int some_variable = 0;"
+
+ # Code to be used in simple link tests
+ lt_simple_link_test_code='int main(int, char *[]) { return(0); }'
+
+ # ltmain only uses $CC for tagged configurations so make sure $CC is set.
+
+
+
+
+
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+
+
+ # save warnings/boilerplate of simple test code
+ ac_outfile=conftest.$ac_objext
+echo "$lt_simple_compile_test_code" >conftest.$ac_ext
+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_compiler_boilerplate=`cat conftest.err`
+$RM conftest*
+
+ ac_outfile=conftest.$ac_objext
+echo "$lt_simple_link_test_code" >conftest.$ac_ext
+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_linker_boilerplate=`cat conftest.err`
+$RM -r conftest*
+
+
+ # Allow CC to be a program name with arguments.
+ lt_save_CC=$CC
+ lt_save_CFLAGS=$CFLAGS
+ lt_save_LD=$LD
+ lt_save_GCC=$GCC
+ GCC=$GXX
+ lt_save_with_gnu_ld=$with_gnu_ld
+ lt_save_path_LD=$lt_cv_path_LD
+ if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
+ lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
+ else
+ $as_unset lt_cv_prog_gnu_ld
+ fi
+ if test -n "${lt_cv_path_LDCXX+set}"; then
+ lt_cv_path_LD=$lt_cv_path_LDCXX
+ else
+ $as_unset lt_cv_path_LD
+ fi
+ test -z "${LDCXX+set}" || LD=$LDCXX
+ CC=${CXX-"c++"}
+ CFLAGS=$CXXFLAGS
+ compiler=$CC
+ compiler_CXX=$CC
+ func_cc_basename $compiler
+cc_basename=$func_cc_basename_result
+
+
+ if test -n "$compiler"; then
+ # We don't want -fno-exception when compiling C++ code, so set the
+ # no_builtin_flag separately
+ if test yes = "$GXX"; then
+ lt_prog_compiler_no_builtin_flag_CXX=' -fno-builtin'
+ else
+ lt_prog_compiler_no_builtin_flag_CXX=
+ fi
+
+ if test yes = "$GXX"; then
+ # Set up default GNU C++ configuration
+
+
+
+# Check whether --with-gnu-ld was given.
+if test "${with_gnu_ld+set}" = set; then :
+ withval=$with_gnu_ld; test no = "$withval" || with_gnu_ld=yes
+else
+ with_gnu_ld=no
+fi
+
+ac_prog=ld
+if test yes = "$GCC"; then
+ # Check if gcc -print-prog-name=ld gives a path.
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5
+$as_echo_n "checking for ld used by $CC... " >&6; }
+ case $host in
+ *-*-mingw*)
+ # gcc leaves a trailing carriage return, which upsets mingw
+ ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+ *)
+ ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+ esac
+ case $ac_prog in
+ # Accept absolute paths.
+ [\\/]* | ?:[\\/]*)
+ re_direlt='/[^/][^/]*/\.\./'
+ # Canonicalize the pathname of ld
+ ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
+ while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
+ ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
+ done
+ test -z "$LD" && LD=$ac_prog
+ ;;
+ "")
+ # If it fails, then pretend we aren't using GCC.
+ ac_prog=ld
+ ;;
+ *)
+ # If it is relative, then search for the first ld in PATH.
+ with_gnu_ld=unknown
+ ;;
+ esac
+elif test yes = "$with_gnu_ld"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5
+$as_echo_n "checking for GNU ld... " >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5
+$as_echo_n "checking for non-GNU ld... " >&6; }
+fi
+if ${lt_cv_path_LD+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -z "$LD"; then
+ lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
+ for ac_dir in $PATH; do
+ IFS=$lt_save_ifs
+ test -z "$ac_dir" && ac_dir=.
+ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+ lt_cv_path_LD=$ac_dir/$ac_prog
+ # Check to see if the program is GNU ld. I'd rather use --version,
+ # but apparently some variants of GNU ld only accept -v.
+ # Break only if it was the GNU/non-GNU ld that we prefer.
+ case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
+ *GNU* | *'with BFD'*)
+ test no != "$with_gnu_ld" && break
+ ;;
+ *)
+ test yes != "$with_gnu_ld" && break
+ ;;
+ esac
+ fi
+ done
+ IFS=$lt_save_ifs
+else
+ lt_cv_path_LD=$LD # Let the user override the test with a path.
+fi
+fi
+
+LD=$lt_cv_path_LD
+if test -n "$LD"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5
+$as_echo "$LD" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5
+$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; }
+if ${lt_cv_prog_gnu_ld+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ # I'd rather use --version here, but apparently some GNU lds only accept -v.
+case `$LD -v 2>&1 </dev/null` in
+*GNU* | *'with BFD'*)
+ lt_cv_prog_gnu_ld=yes
+ ;;
+*)
+ lt_cv_prog_gnu_ld=no
+ ;;
+esac
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_gnu_ld" >&5
+$as_echo "$lt_cv_prog_gnu_ld" >&6; }
+with_gnu_ld=$lt_cv_prog_gnu_ld
+
+
+
+
+
+
+
+ # Check if GNU C++ uses GNU ld as the underlying linker, since the
+ # archiving commands below assume that GNU ld is being used.
+ if test yes = "$with_gnu_ld"; then
+ archive_cmds_CXX='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
+ archive_expsym_cmds_CXX='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
+
+ hardcode_libdir_flag_spec_CXX='$wl-rpath $wl$libdir'
+ export_dynamic_flag_spec_CXX='$wl--export-dynamic'
+
+ # If archive_cmds runs LD, not CC, wlarc should be empty
+ # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
+ # investigate it a little bit more. (MM)
+ wlarc='$wl'
+
+ # ancient GNU ld didn't support --whole-archive et. al.
+ if eval "`$CC -print-prog-name=ld` --help 2>&1" |
+ $GREP 'no-whole-archive' > /dev/null; then
+ whole_archive_flag_spec_CXX=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive'
+ else
+ whole_archive_flag_spec_CXX=
+ fi
+ else
+ with_gnu_ld=no
+ wlarc=
+
+ # A generic and very simple default shared library creation
+ # command for GNU C++ for the case where it uses the native
+ # linker, instead of GNU ld. If possible, this setting should
+ # overridden to take advantage of the native linker features on
+ # the platform it is being used on.
+ archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+ fi
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+
+ else
+ GXX=no
+ with_gnu_ld=no
+ wlarc=
+ fi
+
+ # PORTME: fill in a description of your system's C++ link characteristics
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5
+$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; }
+ ld_shlibs_CXX=yes
+ case $host_os in
+ aix3*)
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
+ aix[4-9]*)
+ if test ia64 = "$host_cpu"; then
+ # On IA64, the linker does run time linking by default, so we don't
+ # have to do anything special.
+ aix_use_runtimelinking=no
+ exp_sym_flag='-Bexport'
+ no_entry_flag=
+ else
+ aix_use_runtimelinking=no
+
+ # Test if we are trying to use run time linking or normal
+ # AIX style linking. If -brtl is somewhere in LDFLAGS, we
+ # have runtime linking enabled, and use it for executables.
+ # For shared libraries, we enable/disable runtime linking
+ # depending on the kind of the shared library created -
+ # when "with_aix_soname,aix_use_runtimelinking" is:
+ # "aix,no" lib.a(lib.so.V) shared, rtl:no, for executables
+ # "aix,yes" lib.so shared, rtl:yes, for executables
+ # lib.a static archive
+ # "both,no" lib.so.V(shr.o) shared, rtl:yes
+ # lib.a(lib.so.V) shared, rtl:no, for executables
+ # "both,yes" lib.so.V(shr.o) shared, rtl:yes, for executables
+ # lib.a(lib.so.V) shared, rtl:no
+ # "svr4,*" lib.so.V(shr.o) shared, rtl:yes, for executables
+ # lib.a static archive
+ case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
+ for ld_flag in $LDFLAGS; do
+ case $ld_flag in
+ *-brtl*)
+ aix_use_runtimelinking=yes
+ break
+ ;;
+ esac
+ done
+ if test svr4,no = "$with_aix_soname,$aix_use_runtimelinking"; then
+ # With aix-soname=svr4, we create the lib.so.V shared archives only,
+ # so we don't have lib.a shared libs to link our executables.
+ # We have to force runtime linking in this case.
+ aix_use_runtimelinking=yes
+ LDFLAGS="$LDFLAGS -Wl,-brtl"
+ fi
+ ;;
+ esac
+
+ exp_sym_flag='-bexport'
+ no_entry_flag='-bnoentry'
+ fi
+
+ # When large executables or shared objects are built, AIX ld can
+ # have problems creating the table of contents. If linking a library
+ # or program results in "error TOC overflow" add -mminimal-toc to
+ # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
+ # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+ archive_cmds_CXX=''
+ hardcode_direct_CXX=yes
+ hardcode_direct_absolute_CXX=yes
+ hardcode_libdir_separator_CXX=':'
+ link_all_deplibs_CXX=yes
+ file_list_spec_CXX='$wl-f,'
+ case $with_aix_soname,$aix_use_runtimelinking in
+ aix,*) ;; # no import file
+ svr4,* | *,yes) # use import file
+ # The Import File defines what to hardcode.
+ hardcode_direct_CXX=no
+ hardcode_direct_absolute_CXX=no
+ ;;
+ esac
+
+ if test yes = "$GXX"; then
+ case $host_os in aix4.[012]|aix4.[012].*)
+ # We only want to do this on AIX 4.2 and lower, the check
+ # below for broken collect2 doesn't work under 4.3+
+ collect2name=`$CC -print-prog-name=collect2`
+ if test -f "$collect2name" &&
+ strings "$collect2name" | $GREP resolve_lib_name >/dev/null
+ then
+ # We have reworked collect2
+ :
+ else
+ # We have old collect2
+ hardcode_direct_CXX=unsupported
+ # It fails to find uninstalled libraries when the uninstalled
+ # path is not listed in the libpath. Setting hardcode_minus_L
+ # to unsupported forces relinking
+ hardcode_minus_L_CXX=yes
+ hardcode_libdir_flag_spec_CXX='-L$libdir'
+ hardcode_libdir_separator_CXX=
+ fi
+ esac
+ shared_flag='-shared'
+ if test yes = "$aix_use_runtimelinking"; then
+ shared_flag=$shared_flag' $wl-G'
+ fi
+ # Need to ensure runtime linking is disabled for the traditional
+ # shared library, or the linker may eventually find shared libraries
+ # /with/ Import File - we do not want to mix them.
+ shared_flag_aix='-shared'
+ shared_flag_svr4='-shared $wl-G'
+ else
+ # not using gcc
+ if test ia64 = "$host_cpu"; then
+ # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+ # chokes on -Wl,-G. The following line is correct:
+ shared_flag='-G'
+ else
+ if test yes = "$aix_use_runtimelinking"; then
+ shared_flag='$wl-G'
+ else
+ shared_flag='$wl-bM:SRE'
+ fi
+ shared_flag_aix='$wl-bM:SRE'
+ shared_flag_svr4='$wl-G'
+ fi
+ fi
+
+ export_dynamic_flag_spec_CXX='$wl-bexpall'
+ # It seems that -bexpall does not export symbols beginning with
+ # underscore (_), so it is better to generate a list of symbols to
+ # export.
+ always_export_symbols_CXX=yes
+ if test aix,yes = "$with_aix_soname,$aix_use_runtimelinking"; then
+ # Warning - without using the other runtime loading flags (-brtl),
+ # -berok will link without error, but may produce a broken library.
+ # The "-G" linker flag allows undefined symbols.
+ no_undefined_flag_CXX='-bernotok'
+ # Determine the default libpath from the value encoded in an empty
+ # executable.
+ if test set = "${lt_cv_aix_libpath+set}"; then
+ aix_libpath=$lt_cv_aix_libpath
+else
+ if ${lt_cv_aix_libpath__CXX+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_link "$LINENO"; then :
+
+ lt_aix_libpath_sed='
+ /Import File Strings/,/^$/ {
+ /^0/ {
+ s/^0 *\([^ ]*\) *$/\1/
+ p
+ }
+ }'
+ lt_cv_aix_libpath__CXX=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+ # Check for a 64-bit object if we didn't find anything.
+ if test -z "$lt_cv_aix_libpath__CXX"; then
+ lt_cv_aix_libpath__CXX=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+ fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ if test -z "$lt_cv_aix_libpath__CXX"; then
+ lt_cv_aix_libpath__CXX=/usr/lib:/lib
+ fi
+
+fi
+
+ aix_libpath=$lt_cv_aix_libpath__CXX
+fi
+
+ hardcode_libdir_flag_spec_CXX='$wl-blibpath:$libdir:'"$aix_libpath"
+
+ archive_expsym_cmds_CXX='$CC -o $output_objdir/$soname $libobjs $deplibs $wl'$no_entry_flag' $compiler_flags `if test -n "$allow_undefined_flag"; then func_echo_all "$wl$allow_undefined_flag"; else :; fi` $wl'$exp_sym_flag:\$export_symbols' '$shared_flag
+ else
+ if test ia64 = "$host_cpu"; then
+ hardcode_libdir_flag_spec_CXX='$wl-R $libdir:/usr/lib:/lib'
+ allow_undefined_flag_CXX="-z nodefs"
+ archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\$wl$no_entry_flag"' $compiler_flags $wl$allow_undefined_flag '"\$wl$exp_sym_flag:\$export_symbols"
+ else
+ # Determine the default libpath from the value encoded in an
+ # empty executable.
+ if test set = "${lt_cv_aix_libpath+set}"; then
+ aix_libpath=$lt_cv_aix_libpath
+else
+ if ${lt_cv_aix_libpath__CXX+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_link "$LINENO"; then :
+
+ lt_aix_libpath_sed='
+ /Import File Strings/,/^$/ {
+ /^0/ {
+ s/^0 *\([^ ]*\) *$/\1/
+ p
+ }
+ }'
+ lt_cv_aix_libpath__CXX=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+ # Check for a 64-bit object if we didn't find anything.
+ if test -z "$lt_cv_aix_libpath__CXX"; then
+ lt_cv_aix_libpath__CXX=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+ fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ if test -z "$lt_cv_aix_libpath__CXX"; then
+ lt_cv_aix_libpath__CXX=/usr/lib:/lib
+ fi
+
+fi
+
+ aix_libpath=$lt_cv_aix_libpath__CXX
+fi
+
+ hardcode_libdir_flag_spec_CXX='$wl-blibpath:$libdir:'"$aix_libpath"
+ # Warning - without using the other run time loading flags,
+ # -berok will link without error, but may produce a broken library.
+ no_undefined_flag_CXX=' $wl-bernotok'
+ allow_undefined_flag_CXX=' $wl-berok'
+ if test yes = "$with_gnu_ld"; then
+ # We only use this code for GNU lds that support --whole-archive.
+ whole_archive_flag_spec_CXX='$wl--whole-archive$convenience $wl--no-whole-archive'
+ else
+ # Exported symbols can be pulled into shared objects from archives
+ whole_archive_flag_spec_CXX='$convenience'
+ fi
+ archive_cmds_need_lc_CXX=yes
+ archive_expsym_cmds_CXX='$RM -r $output_objdir/$realname.d~$MKDIR $output_objdir/$realname.d'
+ # -brtl affects multiple linker settings, -berok does not and is overridden later
+ compiler_flags_filtered='`func_echo_all "$compiler_flags " | $SED -e "s%-brtl\\([, ]\\)%-berok\\1%g"`'
+ if test svr4 != "$with_aix_soname"; then
+ # This is similar to how AIX traditionally builds its shared
+ # libraries. Need -bnortl late, we may have -brtl in LDFLAGS.
+ archive_expsym_cmds_CXX="$archive_expsym_cmds_CXX"'~$CC '$shared_flag_aix' -o $output_objdir/$realname.d/$soname $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$realname.d/$soname'
+ fi
+ if test aix != "$with_aix_soname"; then
+ archive_expsym_cmds_CXX="$archive_expsym_cmds_CXX"'~$CC '$shared_flag_svr4' -o $output_objdir/$realname.d/$shared_archive_member_spec.o $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$STRIP -e $output_objdir/$realname.d/$shared_archive_member_spec.o~( func_echo_all "#! $soname($shared_archive_member_spec.o)"; if test shr_64 = "$shared_archive_member_spec"; then func_echo_all "# 64"; else func_echo_all "# 32"; fi; cat $export_symbols ) > $output_objdir/$realname.d/$shared_archive_member_spec.imp~$AR $AR_FLAGS $output_objdir/$soname $output_objdir/$realname.d/$shared_archive_member_spec.o $output_objdir/$realname.d/$shared_archive_member_spec.imp'
+ else
+ # used by -dlpreopen to get the symbols
+ archive_expsym_cmds_CXX="$archive_expsym_cmds_CXX"'~$MV $output_objdir/$realname.d/$soname $output_objdir'
+ fi
+ archive_expsym_cmds_CXX="$archive_expsym_cmds_CXX"'~$RM -r $output_objdir/$realname.d'
+ fi
+ fi
+ ;;
+
+ beos*)
+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ allow_undefined_flag_CXX=unsupported
+ # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+ # support --undefined. This deserves some investigation. FIXME
+ archive_cmds_CXX='$CC -nostart $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+ else
+ ld_shlibs_CXX=no
+ fi
+ ;;
+
+ chorus*)
+ case $cc_basename in
+ *)
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
+ esac
+ ;;
+
+ cygwin* | mingw* | pw32* | cegcc*)
+ case $GXX,$cc_basename in
+ ,cl* | no,cl*)
+ # Native MSVC
+ # hardcode_libdir_flag_spec is actually meaningless, as there is
+ # no search path for DLLs.
+ hardcode_libdir_flag_spec_CXX=' '
+ allow_undefined_flag_CXX=unsupported
+ always_export_symbols_CXX=yes
+ file_list_spec_CXX='@'
+ # Tell ltmain to make .lib files, not .a files.
+ libext=lib
+ # Tell ltmain to make .dll files, not .so files.
+ shrext_cmds=.dll
+ # FIXME: Setting linknames here is a bad hack.
+ archive_cmds_CXX='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~linknames='
+ archive_expsym_cmds_CXX='if test DEF = "`$SED -n -e '\''s/^[ ]*//'\'' -e '\''/^\(;.*\)*$/d'\'' -e '\''s/^\(EXPORTS\|LIBRARY\)\([ ].*\)*$/DEF/p'\'' -e q $export_symbols`" ; then
+ cp "$export_symbols" "$output_objdir/$soname.def";
+ echo "$tool_output_objdir$soname.def" > "$output_objdir/$soname.exp";
+ else
+ $SED -e '\''s/^/-link -EXPORT:/'\'' < $export_symbols > $output_objdir/$soname.exp;
+ fi~
+ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
+ linknames='
+ # The linker will not automatically build a static lib if we build a DLL.
+ # _LT_TAGVAR(old_archive_from_new_cmds, CXX)='true'
+ enable_shared_with_static_runtimes_CXX=yes
+ # Don't use ranlib
+ old_postinstall_cmds_CXX='chmod 644 $oldlib'
+ postlink_cmds_CXX='lt_outputfile="@OUTPUT@"~
+ lt_tool_outputfile="@TOOL_OUTPUT@"~
+ case $lt_outputfile in
+ *.exe|*.EXE) ;;
+ *)
+ lt_outputfile=$lt_outputfile.exe
+ lt_tool_outputfile=$lt_tool_outputfile.exe
+ ;;
+ esac~
+ func_to_tool_file "$lt_outputfile"~
+ if test : != "$MANIFEST_TOOL" && test -f "$lt_outputfile.manifest"; then
+ $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
+ $RM "$lt_outputfile.manifest";
+ fi'
+ ;;
+ *)
+ # g++
+ # _LT_TAGVAR(hardcode_libdir_flag_spec, CXX) is actually meaningless,
+ # as there is no search path for DLLs.
+ hardcode_libdir_flag_spec_CXX='-L$libdir'
+ export_dynamic_flag_spec_CXX='$wl--export-all-symbols'
+ allow_undefined_flag_CXX=unsupported
+ always_export_symbols_CXX=no
+ enable_shared_with_static_runtimes_CXX=yes
+
+ if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+ archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ # If the export-symbols file already is a .def file, use it as
+ # is; otherwise, prepend EXPORTS...
+ archive_expsym_cmds_CXX='if test DEF = "`$SED -n -e '\''s/^[ ]*//'\'' -e '\''/^\(;.*\)*$/d'\'' -e '\''s/^\(EXPORTS\|LIBRARY\)\([ ].*\)*$/DEF/p'\'' -e q $export_symbols`" ; then
+ cp $export_symbols $output_objdir/$soname.def;
+ else
+ echo EXPORTS > $output_objdir/$soname.def;
+ cat $export_symbols >> $output_objdir/$soname.def;
+ fi~
+ $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ else
+ ld_shlibs_CXX=no
+ fi
+ ;;
+ esac
+ ;;
+ darwin* | rhapsody*)
+
+
+ archive_cmds_need_lc_CXX=no
+ hardcode_direct_CXX=no
+ hardcode_automatic_CXX=yes
+ hardcode_shlibpath_var_CXX=unsupported
+ if test yes = "$lt_cv_ld_force_load"; then
+ whole_archive_flag_spec_CXX='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience $wl-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
+
+ else
+ whole_archive_flag_spec_CXX=''
+ fi
+ link_all_deplibs_CXX=yes
+ allow_undefined_flag_CXX=$_lt_dar_allow_undefined
+ case $cc_basename in
+ ifort*|nagfor*) _lt_dar_can_shared=yes ;;
+ *) _lt_dar_can_shared=$GCC ;;
+ esac
+ if test yes = "$_lt_dar_can_shared"; then
+ output_verbose_link_cmd=func_echo_all
+ archive_cmds_CXX="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dsymutil"
+ module_cmds_CXX="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dsymutil"
+ archive_expsym_cmds_CXX="sed 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dar_export_syms$_lt_dsymutil"
+ module_expsym_cmds_CXX="sed -e 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dar_export_syms$_lt_dsymutil"
+ if test yes != "$lt_cv_apple_cc_single_mod"; then
+ archive_cmds_CXX="\$CC -r -keep_private_externs -nostdlib -o \$lib-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$lib-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring$_lt_dsymutil"
+ archive_expsym_cmds_CXX="sed 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \$lib-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$lib-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring$_lt_dar_export_syms$_lt_dsymutil"
+ fi
+
+ else
+ ld_shlibs_CXX=no
+ fi
+
+ ;;
+
+ os2*)
+ hardcode_libdir_flag_spec_CXX='-L$libdir'
+ hardcode_minus_L_CXX=yes
+ allow_undefined_flag_CXX=unsupported
+ shrext_cmds=.dll
+ archive_cmds_CXX='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+ $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+ $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+ $ECHO EXPORTS >> $output_objdir/$libname.def~
+ emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~
+ $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+ emximp -o $lib $output_objdir/$libname.def'
+ archive_expsym_cmds_CXX='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+ $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+ $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+ $ECHO EXPORTS >> $output_objdir/$libname.def~
+ prefix_cmds="$SED"~
+ if test EXPORTS = "`$SED 1q $export_symbols`"; then
+ prefix_cmds="$prefix_cmds -e 1d";
+ fi~
+ prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~
+ cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~
+ $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+ emximp -o $lib $output_objdir/$libname.def'
+ old_archive_From_new_cmds_CXX='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def'
+ enable_shared_with_static_runtimes_CXX=yes
+ ;;
+
+ dgux*)
+ case $cc_basename in
+ ec++*)
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
+ ghcx*)
+ # Green Hills C++ Compiler
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
+ *)
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
+ esac
+ ;;
+
+ freebsd2.*)
+ # C++ shared libraries reported to be fairly broken before
+ # switch to ELF
+ ld_shlibs_CXX=no
+ ;;
+
+ freebsd-elf*)
+ archive_cmds_need_lc_CXX=no
+ ;;
+
+ freebsd* | dragonfly*)
+ # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
+ # conventions
+ ld_shlibs_CXX=yes
+ ;;
+
+ haiku*)
+ archive_cmds_CXX='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+ link_all_deplibs_CXX=yes
+ ;;
+
+ hpux9*)
+ hardcode_libdir_flag_spec_CXX='$wl+b $wl$libdir'
+ hardcode_libdir_separator_CXX=:
+ export_dynamic_flag_spec_CXX='$wl-E'
+ hardcode_direct_CXX=yes
+ hardcode_minus_L_CXX=yes # Not in the search PATH,
+ # but as the default
+ # location of the library.
+
+ case $cc_basename in
+ CC*)
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
+ aCC*)
+ archive_cmds_CXX='$RM $output_objdir/$soname~$CC -b $wl+b $wl$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib'
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ #
+ # There doesn't appear to be a way to prevent this compiler from
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+ ;;
+ *)
+ if test yes = "$GXX"; then
+ archive_cmds_CXX='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag $wl+b $wl$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib'
+ else
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ fi
+ ;;
+ esac
+ ;;
+
+ hpux10*|hpux11*)
+ if test no = "$with_gnu_ld"; then
+ hardcode_libdir_flag_spec_CXX='$wl+b $wl$libdir'
+ hardcode_libdir_separator_CXX=:
+
+ case $host_cpu in
+ hppa*64*|ia64*)
+ ;;
+ *)
+ export_dynamic_flag_spec_CXX='$wl-E'
+ ;;
+ esac
+ fi
+ case $host_cpu in
+ hppa*64*|ia64*)
+ hardcode_direct_CXX=no
+ hardcode_shlibpath_var_CXX=no
+ ;;
+ *)
+ hardcode_direct_CXX=yes
+ hardcode_direct_absolute_CXX=yes
+ hardcode_minus_L_CXX=yes # Not in the search PATH,
+ # but as the default
+ # location of the library.
+ ;;
+ esac
+
+ case $cc_basename in
+ CC*)
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
+ aCC*)
+ case $host_cpu in
+ hppa*64*)
+ archive_cmds_CXX='$CC -b $wl+h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ ia64*)
+ archive_cmds_CXX='$CC -b $wl+h $wl$soname $wl+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ *)
+ archive_cmds_CXX='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ esac
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ #
+ # There doesn't appear to be a way to prevent this compiler from
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+ ;;
+ *)
+ if test yes = "$GXX"; then
+ if test no = "$with_gnu_ld"; then
+ case $host_cpu in
+ hppa*64*)
+ archive_cmds_CXX='$CC -shared -nostdlib -fPIC $wl+h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ ia64*)
+ archive_cmds_CXX='$CC -shared -nostdlib $pic_flag $wl+h $wl$soname $wl+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ *)
+ archive_cmds_CXX='$CC -shared -nostdlib $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ esac
+ fi
+ else
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ fi
+ ;;
+ esac
+ ;;
+
+ interix[3-9]*)
+ hardcode_direct_CXX=no
+ hardcode_shlibpath_var_CXX=no
+ hardcode_libdir_flag_spec_CXX='$wl-rpath,$libdir'
+ export_dynamic_flag_spec_CXX='$wl-E'
+ # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+ # Instead, shared libraries are loaded at an image base (0x10000000 by
+ # default) and relocated if they conflict, which is a slow very memory
+ # consuming and fragmenting process. To avoid this, we pick a random,
+ # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+ # time. Moving up from 0x10000000 also allows more sbrk(2) space.
+ archive_cmds_CXX='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ archive_expsym_cmds_CXX='sed "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--retain-symbols-file,$output_objdir/$soname.expsym $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ ;;
+ irix5* | irix6*)
+ case $cc_basename in
+ CC*)
+ # SGI C++
+ archive_cmds_CXX='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
+
+ # Archives containing C++ object files must be created using
+ # "CC -ar", where "CC" is the IRIX C++ compiler. This is
+ # necessary to make sure instantiated templates are included
+ # in the archive.
+ old_archive_cmds_CXX='$CC -ar -WR,-u -o $oldlib $oldobjs'
+ ;;
+ *)
+ if test yes = "$GXX"; then
+ if test no = "$with_gnu_ld"; then
+ archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
+ else
+ archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` -o $lib'
+ fi
+ fi
+ link_all_deplibs_CXX=yes
+ ;;
+ esac
+ hardcode_libdir_flag_spec_CXX='$wl-rpath $wl$libdir'
+ hardcode_libdir_separator_CXX=:
+ inherit_rpath_CXX=yes
+ ;;
+
+ linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
+ case $cc_basename in
+ KCC*)
+ # Kuck and Associates, Inc. (KAI) C++ Compiler
+
+ # KCC will only create a shared library if the output file
+ # ends with ".so" (or ".sl" for HP-UX), so rename the library
+ # to its proper name (with version) after linking.
+ archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\$tempext\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+ archive_expsym_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\$tempext\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib $wl-retain-symbols-file,$export_symbols; mv \$templib $lib'
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ #
+ # There doesn't appear to be a way to prevent this compiler from
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+ output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+
+ hardcode_libdir_flag_spec_CXX='$wl-rpath,$libdir'
+ export_dynamic_flag_spec_CXX='$wl--export-dynamic'
+
+ # Archives containing C++ object files must be created using
+ # "CC -Bstatic", where "CC" is the KAI C++ compiler.
+ old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs'
+ ;;
+ icpc* | ecpc* )
+ # Intel C++
+ with_gnu_ld=yes
+ # version 8.0 and above of icpc choke on multiply defined symbols
+ # if we add $predep_objects and $postdep_objects, however 7.1 and
+ # earlier do not add the objects themselves.
+ case `$CC -V 2>&1` in
+ *"Version 7."*)
+ archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
+ archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
+ ;;
+ *) # Version 8.0 or newer
+ tmp_idyn=
+ case $host_cpu in
+ ia64*) tmp_idyn=' -i_dynamic';;
+ esac
+ archive_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+ archive_expsym_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
+ ;;
+ esac
+ archive_cmds_need_lc_CXX=no
+ hardcode_libdir_flag_spec_CXX='$wl-rpath,$libdir'
+ export_dynamic_flag_spec_CXX='$wl--export-dynamic'
+ whole_archive_flag_spec_CXX='$wl--whole-archive$convenience $wl--no-whole-archive'
+ ;;
+ pgCC* | pgcpp*)
+ # Portland Group C++ compiler
+ case `$CC -V` in
+ *pgCC\ [1-5].* | *pgcpp\ [1-5].*)
+ prelink_cmds_CXX='tpldir=Template.dir~
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~
+ compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"'
+ old_archive_cmds_CXX='tpldir=Template.dir~
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~
+ $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~
+ $RANLIB $oldlib'
+ archive_cmds_CXX='tpldir=Template.dir~
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
+ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
+ archive_expsym_cmds_CXX='tpldir=Template.dir~
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
+ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
+ ;;
+ *) # Version 6 and above use weak symbols
+ archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
+ archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
+ ;;
+ esac
+
+ hardcode_libdir_flag_spec_CXX='$wl--rpath $wl$libdir'
+ export_dynamic_flag_spec_CXX='$wl--export-dynamic'
+ whole_archive_flag_spec_CXX='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
+ ;;
+ cxx*)
+ # Compaq C++
+ archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
+ archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib $wl-retain-symbols-file $wl$export_symbols'
+
+ runpath_var=LD_RUN_PATH
+ hardcode_libdir_flag_spec_CXX='-rpath $libdir'
+ hardcode_libdir_separator_CXX=:
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ #
+ # There doesn't appear to be a way to prevent this compiler from
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed'
+ ;;
+ xl* | mpixl* | bgxl*)
+ # IBM XL 8.0 on PPC, with GNU ld
+ hardcode_libdir_flag_spec_CXX='$wl-rpath $wl$libdir'
+ export_dynamic_flag_spec_CXX='$wl--export-dynamic'
+ archive_cmds_CXX='$CC -qmkshrobj $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+ if test yes = "$supports_anon_versioning"; then
+ archive_expsym_cmds_CXX='echo "{ global:" > $output_objdir/$libname.ver~
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+ echo "local: *; };" >> $output_objdir/$libname.ver~
+ $CC -qmkshrobj $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-version-script $wl$output_objdir/$libname.ver -o $lib'
+ fi
+ ;;
+ *)
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ C*)
+ # Sun C++ 5.9
+ no_undefined_flag_CXX=' -zdefs'
+ archive_cmds_CXX='$CC -G$allow_undefined_flag -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ archive_expsym_cmds_CXX='$CC -G$allow_undefined_flag -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-retain-symbols-file $wl$export_symbols'
+ hardcode_libdir_flag_spec_CXX='-R$libdir'
+ whole_archive_flag_spec_CXX='$wl--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
+ compiler_needs_object_CXX=yes
+
+ # Not sure whether something based on
+ # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1
+ # would be better.
+ output_verbose_link_cmd='func_echo_all'
+
+ # Archives containing C++ object files must be created using
+ # "CC -xar", where "CC" is the Sun C++ compiler. This is
+ # necessary to make sure instantiated templates are included
+ # in the archive.
+ old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs'
+ ;;
+ esac
+ ;;
+ esac
+ ;;
+
+ lynxos*)
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
+
+ m88k*)
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
+
+ mvs*)
+ case $cc_basename in
+ cxx*)
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
+ *)
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
+ esac
+ ;;
+
+ netbsd*)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+ archive_cmds_CXX='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
+ wlarc=
+ hardcode_libdir_flag_spec_CXX='-R$libdir'
+ hardcode_direct_CXX=yes
+ hardcode_shlibpath_var_CXX=no
+ fi
+ # Workaround some broken pre-1.5 toolchains
+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
+ ;;
+
+ *nto* | *qnx*)
+ ld_shlibs_CXX=yes
+ ;;
+
+ openbsd* | bitrig*)
+ if test -f /usr/libexec/ld.so; then
+ hardcode_direct_CXX=yes
+ hardcode_shlibpath_var_CXX=no
+ hardcode_direct_absolute_CXX=yes
+ archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+ hardcode_libdir_flag_spec_CXX='$wl-rpath,$libdir'
+ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`"; then
+ archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-retain-symbols-file,$export_symbols -o $lib'
+ export_dynamic_flag_spec_CXX='$wl-E'
+ whole_archive_flag_spec_CXX=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive'
+ fi
+ output_verbose_link_cmd=func_echo_all
+ else
+ ld_shlibs_CXX=no
+ fi
+ ;;
+
+ osf3* | osf4* | osf5*)
+ case $cc_basename in
+ KCC*)
+ # Kuck and Associates, Inc. (KAI) C++ Compiler
+
+ # KCC will only create a shared library if the output file
+ # ends with ".so" (or ".sl" for HP-UX), so rename the library
+ # to its proper name (with version) after linking.
+ archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\$tempext\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+
+ hardcode_libdir_flag_spec_CXX='$wl-rpath,$libdir'
+ hardcode_libdir_separator_CXX=:
+
+ # Archives containing C++ object files must be created using
+ # the KAI C++ compiler.
+ case $host in
+ osf3*) old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs' ;;
+ *) old_archive_cmds_CXX='$CC -o $oldlib $oldobjs' ;;
+ esac
+ ;;
+ RCC*)
+ # Rational C++ 2.4.1
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
+ cxx*)
+ case $host in
+ osf3*)
+ allow_undefined_flag_CXX=' $wl-expect_unresolved $wl\*'
+ archive_cmds_CXX='$CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $soname `test -n "$verstring" && func_echo_all "$wl-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
+ hardcode_libdir_flag_spec_CXX='$wl-rpath $wl$libdir'
+ ;;
+ *)
+ allow_undefined_flag_CXX=' -expect_unresolved \*'
+ archive_cmds_CXX='$CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
+ archive_expsym_cmds_CXX='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
+ echo "-hidden">> $lib.exp~
+ $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname $wl-input $wl$lib.exp `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib~
+ $RM $lib.exp'
+ hardcode_libdir_flag_spec_CXX='-rpath $libdir'
+ ;;
+ esac
+
+ hardcode_libdir_separator_CXX=:
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ #
+ # There doesn't appear to be a way to prevent this compiler from
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+ ;;
+ *)
+ if test yes,no = "$GXX,$with_gnu_ld"; then
+ allow_undefined_flag_CXX=' $wl-expect_unresolved $wl\*'
+ case $host in
+ osf3*)
+ archive_cmds_CXX='$CC -shared -nostdlib $allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
+ ;;
+ *)
+ archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-msym $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
+ ;;
+ esac
+
+ hardcode_libdir_flag_spec_CXX='$wl-rpath $wl$libdir'
+ hardcode_libdir_separator_CXX=:
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+
+ else
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ fi
+ ;;
+ esac
+ ;;
+
+ psos*)
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
+
+ sunos4*)
+ case $cc_basename in
+ CC*)
+ # Sun C++ 4.x
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
+ lcc*)
+ # Lucid
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
+ *)
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
+ esac
+ ;;
+
+ solaris*)
+ case $cc_basename in
+ CC* | sunCC*)
+ # Sun C++ 4.2, 5.x and Centerline C++
+ archive_cmds_need_lc_CXX=yes
+ no_undefined_flag_CXX=' -zdefs'
+ archive_cmds_CXX='$CC -G$allow_undefined_flag -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ archive_expsym_cmds_CXX='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $CC -G$allow_undefined_flag $wl-M $wl$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+
+ hardcode_libdir_flag_spec_CXX='-R$libdir'
+ hardcode_shlibpath_var_CXX=no
+ case $host_os in
+ solaris2.[0-5] | solaris2.[0-5].*) ;;
+ *)
+ # The compiler driver will combine and reorder linker options,
+ # but understands '-z linker_flag'.
+ # Supported since Solaris 2.6 (maybe 2.5.1?)
+ whole_archive_flag_spec_CXX='-z allextract$convenience -z defaultextract'
+ ;;
+ esac
+ link_all_deplibs_CXX=yes
+
+ output_verbose_link_cmd='func_echo_all'
+
+ # Archives containing C++ object files must be created using
+ # "CC -xar", where "CC" is the Sun C++ compiler. This is
+ # necessary to make sure instantiated templates are included
+ # in the archive.
+ old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs'
+ ;;
+ gcx*)
+ # Green Hills C++ Compiler
+ archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-h $wl$soname -o $lib'
+
+ # The C++ compiler must be used to create the archive.
+ old_archive_cmds_CXX='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
+ ;;
+ *)
+ # GNU C++ compiler with Solaris linker
+ if test yes,no = "$GXX,$with_gnu_ld"; then
+ no_undefined_flag_CXX=' $wl-z ${wl}defs'
+ if $CC --version | $GREP -v '^2\.7' > /dev/null; then
+ archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-h $wl$soname -o $lib'
+ archive_expsym_cmds_CXX='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $CC -shared $pic_flag -nostdlib $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+ else
+ # g++ 2.7 appears to require '-G' NOT '-shared' on this
+ # platform.
+ archive_cmds_CXX='$CC -G -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-h $wl$soname -o $lib'
+ archive_expsym_cmds_CXX='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $CC -G -nostdlib $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+ fi
+
+ hardcode_libdir_flag_spec_CXX='$wl-R $wl$libdir'
+ case $host_os in
+ solaris2.[0-5] | solaris2.[0-5].*) ;;
+ *)
+ whole_archive_flag_spec_CXX='$wl-z ${wl}allextract$convenience $wl-z ${wl}defaultextract'
+ ;;
+ esac
+ fi
+ ;;
+ esac
+ ;;
+
+ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
+ no_undefined_flag_CXX='$wl-z,text'
+ archive_cmds_need_lc_CXX=no
+ hardcode_shlibpath_var_CXX=no
+ runpath_var='LD_RUN_PATH'
+
+ case $cc_basename in
+ CC*)
+ archive_cmds_CXX='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds_CXX='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ *)
+ archive_cmds_CXX='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds_CXX='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ esac
+ ;;
+
+ sysv5* | sco3.2v5* | sco5v6*)
+ # Note: We CANNOT use -z defs as we might desire, because we do not
+ # link with -lc, and that would cause any symbols used from libc to
+ # always be unresolved, which means just about no library would
+ # ever link correctly. If we're not using GNU ld we use -z text
+ # though, which does catch some bad symbols but isn't as heavy-handed
+ # as -z defs.
+ no_undefined_flag_CXX='$wl-z,text'
+ allow_undefined_flag_CXX='$wl-z,nodefs'
+ archive_cmds_need_lc_CXX=no
+ hardcode_shlibpath_var_CXX=no
+ hardcode_libdir_flag_spec_CXX='$wl-R,$libdir'
+ hardcode_libdir_separator_CXX=':'
+ link_all_deplibs_CXX=yes
+ export_dynamic_flag_spec_CXX='$wl-Bexport'
+ runpath_var='LD_RUN_PATH'
+
+ case $cc_basename in
+ CC*)
+ archive_cmds_CXX='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds_CXX='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ old_archive_cmds_CXX='$CC -Tprelink_objects $oldobjs~
+ '"$old_archive_cmds_CXX"
+ reload_cmds_CXX='$CC -Tprelink_objects $reload_objs~
+ '"$reload_cmds_CXX"
+ ;;
+ *)
+ archive_cmds_CXX='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds_CXX='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ esac
+ ;;
+
+ tandem*)
+ case $cc_basename in
+ NCC*)
+ # NonStop-UX NCC 3.20
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
+ *)
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
+ esac
+ ;;
+
+ vxworks*)
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
+
+ *)
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
+ esac
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs_CXX" >&5
+$as_echo "$ld_shlibs_CXX" >&6; }
+ test no = "$ld_shlibs_CXX" && can_build_shared=no
+
+ GCC_CXX=$GXX
+ LD_CXX=$LD
+
+ ## CAVEAT EMPTOR:
+ ## There is no encapsulation within the following macros, do not change
+ ## the running order or otherwise move them around unless you know exactly
+ ## what you are doing...
+ # Dependencies to place before and after the object being linked:
+predep_objects_CXX=
+postdep_objects_CXX=
+predeps_CXX=
+postdeps_CXX=
+compiler_lib_search_path_CXX=
+
+cat > conftest.$ac_ext <<_LT_EOF
+class Foo
+{
+public:
+ Foo (void) { a = 0; }
+private:
+ int a;
+};
+_LT_EOF
+
+
+_lt_libdeps_save_CFLAGS=$CFLAGS
+case "$CC $CFLAGS " in #(
+*\ -flto*\ *) CFLAGS="$CFLAGS -fno-lto" ;;
+*\ -fwhopr*\ *) CFLAGS="$CFLAGS -fno-whopr" ;;
+*\ -fuse-linker-plugin*\ *) CFLAGS="$CFLAGS -fno-use-linker-plugin" ;;
+esac
+
+if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then
+ # Parse the compiler output and extract the necessary
+ # objects, libraries and library flags.
+
+ # Sentinel used to keep track of whether or not we are before
+ # the conftest object file.
+ pre_test_object_deps_done=no
+
+ for p in `eval "$output_verbose_link_cmd"`; do
+ case $prev$p in
+
+ -L* | -R* | -l*)
+ # Some compilers place space between "-{L,R}" and the path.
+ # Remove the space.
+ if test x-L = "$p" ||
+ test x-R = "$p"; then
+ prev=$p
+ continue
+ fi
+
+ # Expand the sysroot to ease extracting the directories later.
+ if test -z "$prev"; then
+ case $p in
+ -L*) func_stripname_cnf '-L' '' "$p"; prev=-L; p=$func_stripname_result ;;
+ -R*) func_stripname_cnf '-R' '' "$p"; prev=-R; p=$func_stripname_result ;;
+ -l*) func_stripname_cnf '-l' '' "$p"; prev=-l; p=$func_stripname_result ;;
+ esac
+ fi
+ case $p in
+ =*) func_stripname_cnf '=' '' "$p"; p=$lt_sysroot$func_stripname_result ;;
+ esac
+ if test no = "$pre_test_object_deps_done"; then
+ case $prev in
+ -L | -R)
+ # Internal compiler library paths should come after those
+ # provided the user. The postdeps already come after the
+ # user supplied libs so there is no need to process them.
+ if test -z "$compiler_lib_search_path_CXX"; then
+ compiler_lib_search_path_CXX=$prev$p
+ else
+ compiler_lib_search_path_CXX="${compiler_lib_search_path_CXX} $prev$p"
+ fi
+ ;;
+ # The "-l" case would never come before the object being
+ # linked, so don't bother handling this case.
+ esac
+ else
+ if test -z "$postdeps_CXX"; then
+ postdeps_CXX=$prev$p
+ else
+ postdeps_CXX="${postdeps_CXX} $prev$p"
+ fi
+ fi
+ prev=
+ ;;
+
+ *.lto.$objext) ;; # Ignore GCC LTO objects
+ *.$objext)
+ # This assumes that the test object file only shows up
+ # once in the compiler output.
+ if test "$p" = "conftest.$objext"; then
+ pre_test_object_deps_done=yes
+ continue
+ fi
+
+ if test no = "$pre_test_object_deps_done"; then
+ if test -z "$predep_objects_CXX"; then
+ predep_objects_CXX=$p
+ else
+ predep_objects_CXX="$predep_objects_CXX $p"
+ fi
+ else
+ if test -z "$postdep_objects_CXX"; then
+ postdep_objects_CXX=$p
+ else
+ postdep_objects_CXX="$postdep_objects_CXX $p"
+ fi
+ fi
+ ;;
+
+ *) ;; # Ignore the rest.
+
+ esac
+ done
+
+ # Clean up.
+ rm -f a.out a.exe
+else
+ echo "libtool.m4: error: problem compiling CXX test program"
+fi
+
+$RM -f confest.$objext
+CFLAGS=$_lt_libdeps_save_CFLAGS
+
+# PORTME: override above test on systems where it is broken
+case $host_os in
+interix[3-9]*)
+ # Interix 3.5 installs completely hosed .la files for C++, so rather than
+ # hack all around it, let's just trust "g++" to DTRT.
+ predep_objects_CXX=
+ postdep_objects_CXX=
+ postdeps_CXX=
+ ;;
+esac
+
+
+case " $postdeps_CXX " in
+*" -lc "*) archive_cmds_need_lc_CXX=no ;;
+esac
+ compiler_lib_search_dirs_CXX=
+if test -n "${compiler_lib_search_path_CXX}"; then
+ compiler_lib_search_dirs_CXX=`echo " ${compiler_lib_search_path_CXX}" | $SED -e 's! -L! !g' -e 's!^ !!'`
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ lt_prog_compiler_wl_CXX=
+lt_prog_compiler_pic_CXX=
+lt_prog_compiler_static_CXX=
+
+
+ # C++ specific cases for pic, static, wl, etc.
+ if test yes = "$GXX"; then
+ lt_prog_compiler_wl_CXX='-Wl,'
+ lt_prog_compiler_static_CXX='-static'
+
+ case $host_os in
+ aix*)
+ # All AIX code is PIC.
+ if test ia64 = "$host_cpu"; then
+ # AIX 5 now supports IA64 processor
+ lt_prog_compiler_static_CXX='-Bstatic'
+ fi
+ lt_prog_compiler_pic_CXX='-fPIC'
+ ;;
+
+ amigaos*)
+ case $host_cpu in
+ powerpc)
+ # see comment about AmigaOS4 .so support
+ lt_prog_compiler_pic_CXX='-fPIC'
+ ;;
+ m68k)
+ # FIXME: we need at least 68020 code to build shared libraries, but
+ # adding the '-m68020' flag to GCC prevents building anything better,
+ # like '-m68040'.
+ lt_prog_compiler_pic_CXX='-m68020 -resident32 -malways-restore-a4'
+ ;;
+ esac
+ ;;
+
+ beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+ # PIC is the default for these OSes.
+ ;;
+ mingw* | cygwin* | os2* | pw32* | cegcc*)
+ # This hack is so that the source file can tell whether it is being
+ # built for inclusion in a dll (and should export symbols for example).
+ # Although the cygwin gcc ignores -fPIC, still need this for old-style
+ # (--disable-auto-import) libraries
+ lt_prog_compiler_pic_CXX='-DDLL_EXPORT'
+ case $host_os in
+ os2*)
+ lt_prog_compiler_static_CXX='$wl-static'
+ ;;
+ esac
+ ;;
+ darwin* | rhapsody*)
+ # PIC is the default on this platform
+ # Common symbols not allowed in MH_DYLIB files
+ lt_prog_compiler_pic_CXX='-fno-common'
+ ;;
+ *djgpp*)
+ # DJGPP does not support shared libraries at all
+ lt_prog_compiler_pic_CXX=
+ ;;
+ haiku*)
+ # PIC is the default for Haiku.
+ # The "-static" flag exists, but is broken.
+ lt_prog_compiler_static_CXX=
+ ;;
+ interix[3-9]*)
+ # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+ # Instead, we relocate shared libraries at runtime.
+ ;;
+ sysv4*MP*)
+ if test -d /usr/nec; then
+ lt_prog_compiler_pic_CXX=-Kconform_pic
+ fi
+ ;;
+ hpux*)
+ # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
+ # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag
+ # sets the default TLS model and affects inlining.
+ case $host_cpu in
+ hppa*64*)
+ ;;
+ *)
+ lt_prog_compiler_pic_CXX='-fPIC'
+ ;;
+ esac
+ ;;
+ *qnx* | *nto*)
+ # QNX uses GNU C++, but need to define -shared option too, otherwise
+ # it will coredump.
+ lt_prog_compiler_pic_CXX='-fPIC -shared'
+ ;;
+ *)
+ lt_prog_compiler_pic_CXX='-fPIC'
+ ;;
+ esac
+ else
+ case $host_os in
+ aix[4-9]*)
+ # All AIX code is PIC.
+ if test ia64 = "$host_cpu"; then
+ # AIX 5 now supports IA64 processor
+ lt_prog_compiler_static_CXX='-Bstatic'
+ else
+ lt_prog_compiler_static_CXX='-bnso -bI:/lib/syscalls.exp'
+ fi
+ ;;
+ chorus*)
+ case $cc_basename in
+ cxch68*)
+ # Green Hills C++ Compiler
+ # _LT_TAGVAR(lt_prog_compiler_static, CXX)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
+ ;;
+ esac
+ ;;
+ mingw* | cygwin* | os2* | pw32* | cegcc*)
+ # This hack is so that the source file can tell whether it is being
+ # built for inclusion in a dll (and should export symbols for example).
+ lt_prog_compiler_pic_CXX='-DDLL_EXPORT'
+ ;;
+ dgux*)
+ case $cc_basename in
+ ec++*)
+ lt_prog_compiler_pic_CXX='-KPIC'
+ ;;
+ ghcx*)
+ # Green Hills C++ Compiler
+ lt_prog_compiler_pic_CXX='-pic'
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ freebsd* | dragonfly*)
+ # FreeBSD uses GNU C++
+ ;;
+ hpux9* | hpux10* | hpux11*)
+ case $cc_basename in
+ CC*)
+ lt_prog_compiler_wl_CXX='-Wl,'
+ lt_prog_compiler_static_CXX='$wl-a ${wl}archive'
+ if test ia64 != "$host_cpu"; then
+ lt_prog_compiler_pic_CXX='+Z'
+ fi
+ ;;
+ aCC*)
+ lt_prog_compiler_wl_CXX='-Wl,'
+ lt_prog_compiler_static_CXX='$wl-a ${wl}archive'
+ case $host_cpu in
+ hppa*64*|ia64*)
+ # +Z the default
+ ;;
+ *)
+ lt_prog_compiler_pic_CXX='+Z'
+ ;;
+ esac
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ interix*)
+ # This is c89, which is MS Visual C++ (no shared libs)
+ # Anyone wants to do a port?
+ ;;
+ irix5* | irix6* | nonstopux*)
+ case $cc_basename in
+ CC*)
+ lt_prog_compiler_wl_CXX='-Wl,'
+ lt_prog_compiler_static_CXX='-non_shared'
+ # CC pic flag -KPIC is the default.
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
+ case $cc_basename in
+ KCC*)
+ # KAI C++ Compiler
+ lt_prog_compiler_wl_CXX='--backend -Wl,'
+ lt_prog_compiler_pic_CXX='-fPIC'
+ ;;
+ ecpc* )
+ # old Intel C++ for x86_64, which still supported -KPIC.
+ lt_prog_compiler_wl_CXX='-Wl,'
+ lt_prog_compiler_pic_CXX='-KPIC'
+ lt_prog_compiler_static_CXX='-static'
+ ;;
+ icpc* )
+ # Intel C++, used to be incompatible with GCC.
+ # ICC 10 doesn't accept -KPIC any more.
+ lt_prog_compiler_wl_CXX='-Wl,'
+ lt_prog_compiler_pic_CXX='-fPIC'
+ lt_prog_compiler_static_CXX='-static'
+ ;;
+ pgCC* | pgcpp*)
+ # Portland Group C++ compiler
+ lt_prog_compiler_wl_CXX='-Wl,'
+ lt_prog_compiler_pic_CXX='-fpic'
+ lt_prog_compiler_static_CXX='-Bstatic'
+ ;;
+ cxx*)
+ # Compaq C++
+ # Make sure the PIC flag is empty. It appears that all Alpha
+ # Linux and Compaq Tru64 Unix objects are PIC.
+ lt_prog_compiler_pic_CXX=
+ lt_prog_compiler_static_CXX='-non_shared'
+ ;;
+ xlc* | xlC* | bgxl[cC]* | mpixl[cC]*)
+ # IBM XL 8.0, 9.0 on PPC and BlueGene
+ lt_prog_compiler_wl_CXX='-Wl,'
+ lt_prog_compiler_pic_CXX='-qpic'
+ lt_prog_compiler_static_CXX='-qstaticlink'
+ ;;
+ *)
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ C*)
+ # Sun C++ 5.9
+ lt_prog_compiler_pic_CXX='-KPIC'
+ lt_prog_compiler_static_CXX='-Bstatic'
+ lt_prog_compiler_wl_CXX='-Qoption ld '
+ ;;
+ esac
+ ;;
+ esac
+ ;;
+ lynxos*)
+ ;;
+ m88k*)
+ ;;
+ mvs*)
+ case $cc_basename in
+ cxx*)
+ lt_prog_compiler_pic_CXX='-W c,exportall'
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ netbsd*)
+ ;;
+ *qnx* | *nto*)
+ # QNX uses GNU C++, but need to define -shared option too, otherwise
+ # it will coredump.
+ lt_prog_compiler_pic_CXX='-fPIC -shared'
+ ;;
+ osf3* | osf4* | osf5*)
+ case $cc_basename in
+ KCC*)
+ lt_prog_compiler_wl_CXX='--backend -Wl,'
+ ;;
+ RCC*)
+ # Rational C++ 2.4.1
+ lt_prog_compiler_pic_CXX='-pic'
+ ;;
+ cxx*)
+ # Digital/Compaq C++
+ lt_prog_compiler_wl_CXX='-Wl,'
+ # Make sure the PIC flag is empty. It appears that all Alpha
+ # Linux and Compaq Tru64 Unix objects are PIC.
+ lt_prog_compiler_pic_CXX=
+ lt_prog_compiler_static_CXX='-non_shared'
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ psos*)
+ ;;
+ solaris*)
+ case $cc_basename in
+ CC* | sunCC*)
+ # Sun C++ 4.2, 5.x and Centerline C++
+ lt_prog_compiler_pic_CXX='-KPIC'
+ lt_prog_compiler_static_CXX='-Bstatic'
+ lt_prog_compiler_wl_CXX='-Qoption ld '
+ ;;
+ gcx*)
+ # Green Hills C++ Compiler
+ lt_prog_compiler_pic_CXX='-PIC'
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ sunos4*)
+ case $cc_basename in
+ CC*)
+ # Sun C++ 4.x
+ lt_prog_compiler_pic_CXX='-pic'
+ lt_prog_compiler_static_CXX='-Bstatic'
+ ;;
+ lcc*)
+ # Lucid
+ lt_prog_compiler_pic_CXX='-pic'
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+ case $cc_basename in
+ CC*)
+ lt_prog_compiler_wl_CXX='-Wl,'
+ lt_prog_compiler_pic_CXX='-KPIC'
+ lt_prog_compiler_static_CXX='-Bstatic'
+ ;;
+ esac
+ ;;
+ tandem*)
+ case $cc_basename in
+ NCC*)
+ # NonStop-UX NCC 3.20
+ lt_prog_compiler_pic_CXX='-KPIC'
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ vxworks*)
+ ;;
+ *)
+ lt_prog_compiler_can_build_shared_CXX=no
+ ;;
+ esac
+ fi
+
+case $host_os in
+ # For platforms that do not support PIC, -DPIC is meaningless:
+ *djgpp*)
+ lt_prog_compiler_pic_CXX=
+ ;;
+ *)
+ lt_prog_compiler_pic_CXX="$lt_prog_compiler_pic_CXX -DPIC"
+ ;;
+esac
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5
+$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
+if ${lt_cv_prog_compiler_pic_CXX+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_prog_compiler_pic_CXX=$lt_prog_compiler_pic_CXX
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_CXX" >&5
+$as_echo "$lt_cv_prog_compiler_pic_CXX" >&6; }
+lt_prog_compiler_pic_CXX=$lt_cv_prog_compiler_pic_CXX
+
+#
+# Check to make sure the PIC flag actually works.
+#
+if test -n "$lt_prog_compiler_pic_CXX"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works" >&5
+$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works... " >&6; }
+if ${lt_cv_prog_compiler_pic_works_CXX+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_prog_compiler_pic_works_CXX=no
+ ac_outfile=conftest.$ac_objext
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+ lt_compiler_flag="$lt_prog_compiler_pic_CXX -DPIC" ## exclude from sc_useless_quotes_in_assignment
+ # Insert the option either (1) after the last *FLAGS variable, or
+ # (2) before a word containing "conftest.", or (3) at the end.
+ # Note that $ac_compile itself does not contain backslashes and begins
+ # with a dollar sign (not a hyphen), so the echo should work correctly.
+ # The option is referenced via a variable to avoid confusing sed.
+ lt_compile=`echo "$ac_compile" | $SED \
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+ -e 's:$: $lt_compiler_flag:'`
+ (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+ (eval "$lt_compile" 2>conftest.err)
+ ac_status=$?
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ if (exit $ac_status) && test -s "$ac_outfile"; then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings other than the usual output.
+ $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+ lt_cv_prog_compiler_pic_works_CXX=yes
+ fi
+ fi
+ $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works_CXX" >&5
+$as_echo "$lt_cv_prog_compiler_pic_works_CXX" >&6; }
+
+if test yes = "$lt_cv_prog_compiler_pic_works_CXX"; then
+ case $lt_prog_compiler_pic_CXX in
+ "" | " "*) ;;
+ *) lt_prog_compiler_pic_CXX=" $lt_prog_compiler_pic_CXX" ;;
+ esac
+else
+ lt_prog_compiler_pic_CXX=
+ lt_prog_compiler_can_build_shared_CXX=no
+fi
+
+fi
+
+
+
+
+
+#
+# Check to make sure the static flag actually works.
+#
+wl=$lt_prog_compiler_wl_CXX eval lt_tmp_static_flag=\"$lt_prog_compiler_static_CXX\"
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5
+$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; }
+if ${lt_cv_prog_compiler_static_works_CXX+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_prog_compiler_static_works_CXX=no
+ save_LDFLAGS=$LDFLAGS
+ LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
+ echo "$lt_simple_link_test_code" > conftest.$ac_ext
+ if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+ # The linker can only warn and ignore the option if not recognized
+ # So say no if there are warnings
+ if test -s conftest.err; then
+ # Append any errors to the config.log.
+ cat conftest.err 1>&5
+ $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+ if diff conftest.exp conftest.er2 >/dev/null; then
+ lt_cv_prog_compiler_static_works_CXX=yes
+ fi
+ else
+ lt_cv_prog_compiler_static_works_CXX=yes
+ fi
+ fi
+ $RM -r conftest*
+ LDFLAGS=$save_LDFLAGS
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works_CXX" >&5
+$as_echo "$lt_cv_prog_compiler_static_works_CXX" >&6; }
+
+if test yes = "$lt_cv_prog_compiler_static_works_CXX"; then
+ :
+else
+ lt_prog_compiler_static_CXX=
+fi
+
+
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
+$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
+if ${lt_cv_prog_compiler_c_o_CXX+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_prog_compiler_c_o_CXX=no
+ $RM -r conftest 2>/dev/null
+ mkdir conftest
+ cd conftest
+ mkdir out
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+ lt_compiler_flag="-o out/conftest2.$ac_objext"
+ # Insert the option either (1) after the last *FLAGS variable, or
+ # (2) before a word containing "conftest.", or (3) at the end.
+ # Note that $ac_compile itself does not contain backslashes and begins
+ # with a dollar sign (not a hyphen), so the echo should work correctly.
+ lt_compile=`echo "$ac_compile" | $SED \
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+ -e 's:$: $lt_compiler_flag:'`
+ (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+ (eval "$lt_compile" 2>out/conftest.err)
+ ac_status=$?
+ cat out/conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ if (exit $ac_status) && test -s out/conftest2.$ac_objext
+ then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings
+ $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
+ $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+ if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+ lt_cv_prog_compiler_c_o_CXX=yes
+ fi
+ fi
+ chmod u+w . 2>&5
+ $RM conftest*
+ # SGI C++ compiler will create directory out/ii_files/ for
+ # template instantiation
+ test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+ $RM out/* && rmdir out
+ cd ..
+ $RM -r conftest
+ $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o_CXX" >&5
+$as_echo "$lt_cv_prog_compiler_c_o_CXX" >&6; }
+
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
+$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
+if ${lt_cv_prog_compiler_c_o_CXX+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_prog_compiler_c_o_CXX=no
+ $RM -r conftest 2>/dev/null
+ mkdir conftest
+ cd conftest
+ mkdir out
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+ lt_compiler_flag="-o out/conftest2.$ac_objext"
+ # Insert the option either (1) after the last *FLAGS variable, or
+ # (2) before a word containing "conftest.", or (3) at the end.
+ # Note that $ac_compile itself does not contain backslashes and begins
+ # with a dollar sign (not a hyphen), so the echo should work correctly.
+ lt_compile=`echo "$ac_compile" | $SED \
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+ -e 's:$: $lt_compiler_flag:'`
+ (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+ (eval "$lt_compile" 2>out/conftest.err)
+ ac_status=$?
+ cat out/conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ if (exit $ac_status) && test -s out/conftest2.$ac_objext
+ then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings
+ $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
+ $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+ if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+ lt_cv_prog_compiler_c_o_CXX=yes
+ fi
+ fi
+ chmod u+w . 2>&5
+ $RM conftest*
+ # SGI C++ compiler will create directory out/ii_files/ for
+ # template instantiation
+ test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+ $RM out/* && rmdir out
+ cd ..
+ $RM -r conftest
+ $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o_CXX" >&5
+$as_echo "$lt_cv_prog_compiler_c_o_CXX" >&6; }
+
+
+
+
+hard_links=nottested
+if test no = "$lt_cv_prog_compiler_c_o_CXX" && test no != "$need_locks"; then
+ # do not overwrite the value of need_locks provided by the user
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5
+$as_echo_n "checking if we can lock with hard links... " >&6; }
+ hard_links=yes
+ $RM conftest*
+ ln conftest.a conftest.b 2>/dev/null && hard_links=no
+ touch conftest.a
+ ln conftest.a conftest.b 2>&5 || hard_links=no
+ ln conftest.a conftest.b 2>/dev/null && hard_links=no
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5
+$as_echo "$hard_links" >&6; }
+ if test no = "$hard_links"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: '$CC' does not support '-c -o', so 'make -j' may be unsafe" >&5
+$as_echo "$as_me: WARNING: '$CC' does not support '-c -o', so 'make -j' may be unsafe" >&2;}
+ need_locks=warn
+ fi
+else
+ need_locks=no
+fi
+
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5
+$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; }
+
+ export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+ exclude_expsyms_CXX='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
+ case $host_os in
+ aix[4-9]*)
+ # If we're using GNU nm, then we don't want the "-C" option.
+ # -C means demangle to GNU nm, but means don't demangle to AIX nm.
+ # Without the "-l" option, or with the "-B" option, AIX nm treats
+ # weak defined symbols like other global defined symbols, whereas
+ # GNU nm marks them as "W".
+ # While the 'weak' keyword is ignored in the Export File, we need
+ # it in the Import File for the 'aix-soname' feature, so we have
+ # to replace the "-B" option with "-P" for AIX nm.
+ if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+ export_symbols_cmds_CXX='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { if (\$ 2 == "W") { print \$ 3 " weak" } else { print \$ 3 } } }'\'' | sort -u > $export_symbols'
+ else
+ export_symbols_cmds_CXX='`func_echo_all $NM | $SED -e '\''s/B\([^B]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && (substr(\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols'
+ fi
+ ;;
+ pw32*)
+ export_symbols_cmds_CXX=$ltdll_cmds
+ ;;
+ cygwin* | mingw* | cegcc*)
+ case $cc_basename in
+ cl*)
+ exclude_expsyms_CXX='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*'
+ ;;
+ *)
+ export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols'
+ exclude_expsyms_CXX='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'
+ ;;
+ esac
+ ;;
+ *)
+ export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+ ;;
+ esac
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs_CXX" >&5
+$as_echo "$ld_shlibs_CXX" >&6; }
+test no = "$ld_shlibs_CXX" && can_build_shared=no
+
+with_gnu_ld_CXX=$with_gnu_ld
+
+
+
+
+
+
+#
+# Do we need to explicitly link libc?
+#
+case "x$archive_cmds_need_lc_CXX" in
+x|xyes)
+ # Assume -lc should be added
+ archive_cmds_need_lc_CXX=yes
+
+ if test yes,yes = "$GCC,$enable_shared"; then
+ case $archive_cmds_CXX in
+ *'~'*)
+ # FIXME: we may have to deal with multi-command sequences.
+ ;;
+ '$CC '*)
+ # Test whether the compiler implicitly links with -lc since on some
+ # systems, -lgcc has to come before -lc. If gcc already passes -lc
+ # to ld, don't add -lc before -lgcc.
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5
+$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; }
+if ${lt_cv_archive_cmds_need_lc_CXX+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ $RM conftest*
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } 2>conftest.err; then
+ soname=conftest
+ lib=conftest
+ libobjs=conftest.$ac_objext
+ deplibs=
+ wl=$lt_prog_compiler_wl_CXX
+ pic_flag=$lt_prog_compiler_pic_CXX
+ compiler_flags=-v
+ linker_flags=-v
+ verstring=
+ output_objdir=.
+ libname=conftest
+ lt_save_allow_undefined_flag=$allow_undefined_flag_CXX
+ allow_undefined_flag_CXX=
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds_CXX 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5
+ (eval $archive_cmds_CXX 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }
+ then
+ lt_cv_archive_cmds_need_lc_CXX=no
+ else
+ lt_cv_archive_cmds_need_lc_CXX=yes
+ fi
+ allow_undefined_flag_CXX=$lt_save_allow_undefined_flag
+ else
+ cat conftest.err 1>&5
+ fi
+ $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_archive_cmds_need_lc_CXX" >&5
+$as_echo "$lt_cv_archive_cmds_need_lc_CXX" >&6; }
+ archive_cmds_need_lc_CXX=$lt_cv_archive_cmds_need_lc_CXX
+ ;;
+ esac
+ fi
+ ;;
+esac
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5
+$as_echo_n "checking dynamic linker characteristics... " >&6; }
+
+library_names_spec=
+libname_spec='lib$name'
+soname_spec=
+shrext_cmds=.so
+postinstall_cmds=
+postuninstall_cmds=
+finish_cmds=
+finish_eval=
+shlibpath_var=
+shlibpath_overrides_runpath=unknown
+version_type=none
+dynamic_linker="$host_os ld.so"
+sys_lib_dlsearch_path_spec="/lib /usr/lib"
+need_lib_prefix=unknown
+hardcode_into_libs=no
+
+# when you set need_version to no, make sure it does not cause -set_version
+# flags to be left without arguments
+need_version=unknown
+
+
+
+case $host_os in
+aix3*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ library_names_spec='$libname$release$shared_ext$versuffix $libname.a'
+ shlibpath_var=LIBPATH
+
+ # AIX 3 has no versioning support, so we append a major version to the name.
+ soname_spec='$libname$release$shared_ext$major'
+ ;;
+
+aix[4-9]*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_lib_prefix=no
+ need_version=no
+ hardcode_into_libs=yes
+ if test ia64 = "$host_cpu"; then
+ # AIX 5 supports IA64
+ library_names_spec='$libname$release$shared_ext$major $libname$release$shared_ext$versuffix $libname$shared_ext'
+ shlibpath_var=LD_LIBRARY_PATH
+ else
+ # With GCC up to 2.95.x, collect2 would create an import file
+ # for dependence libraries. The import file would start with
+ # the line '#! .'. This would cause the generated library to
+ # depend on '.', always an invalid library. This was fixed in
+ # development snapshots of GCC prior to 3.0.
+ case $host_os in
+ aix4 | aix4.[01] | aix4.[01].*)
+ if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
+ echo ' yes '
+ echo '#endif'; } | $CC -E - | $GREP yes > /dev/null; then
+ :
+ else
+ can_build_shared=no
+ fi
+ ;;
+ esac
+ # Using Import Files as archive members, it is possible to support
+ # filename-based versioning of shared library archives on AIX. While
+ # this would work for both with and without runtime linking, it will
+ # prevent static linking of such archives. So we do filename-based
+ # shared library versioning with .so extension only, which is used
+ # when both runtime linking and shared linking is enabled.
+ # Unfortunately, runtime linking may impact performance, so we do
+ # not want this to be the default eventually. Also, we use the
+ # versioned .so libs for executables only if there is the -brtl
+ # linker flag in LDFLAGS as well, or --with-aix-soname=svr4 only.
+ # To allow for filename-based versioning support, we need to create
+ # libNAME.so.V as an archive file, containing:
+ # *) an Import File, referring to the versioned filename of the
+ # archive as well as the shared archive member, telling the
+ # bitwidth (32 or 64) of that shared object, and providing the
+ # list of exported symbols of that shared object, eventually
+ # decorated with the 'weak' keyword
+ # *) the shared object with the F_LOADONLY flag set, to really avoid
+ # it being seen by the linker.
+ # At run time we better use the real file rather than another symlink,
+ # but for link time we create the symlink libNAME.so -> libNAME.so.V
+
+ case $with_aix_soname,$aix_use_runtimelinking in
+ # AIX (on Power*) has no versioning support, so currently we cannot hardcode correct
+ # soname into executable. Probably we can add versioning support to
+ # collect2, so additional links can be useful in future.
+ aix,yes) # traditional libtool
+ dynamic_linker='AIX unversionable lib.so'
+ # If using run time linking (on AIX 4.2 or later) use lib<name>.so
+ # instead of lib<name>.a to let people know that these are not
+ # typical AIX shared libraries.
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ ;;
+ aix,no) # traditional AIX only
+ dynamic_linker='AIX lib.a(lib.so.V)'
+ # We preserve .a as extension for shared libraries through AIX4.2
+ # and later when we are not doing run time linking.
+ library_names_spec='$libname$release.a $libname.a'
+ soname_spec='$libname$release$shared_ext$major'
+ ;;
+ svr4,*) # full svr4 only
+ dynamic_linker="AIX lib.so.V($shared_archive_member_spec.o)"
+ library_names_spec='$libname$release$shared_ext$major $libname$shared_ext'
+ # We do not specify a path in Import Files, so LIBPATH fires.
+ shlibpath_overrides_runpath=yes
+ ;;
+ *,yes) # both, prefer svr4
+ dynamic_linker="AIX lib.so.V($shared_archive_member_spec.o), lib.a(lib.so.V)"
+ library_names_spec='$libname$release$shared_ext$major $libname$shared_ext'
+ # unpreferred sharedlib libNAME.a needs extra handling
+ postinstall_cmds='test -n "$linkname" || linkname="$realname"~func_stripname "" ".so" "$linkname"~$install_shared_prog "$dir/$func_stripname_result.$libext" "$destdir/$func_stripname_result.$libext"~test -z "$tstripme" || test -z "$striplib" || $striplib "$destdir/$func_stripname_result.$libext"'
+ postuninstall_cmds='for n in $library_names $old_library; do :; done~func_stripname "" ".so" "$n"~test "$func_stripname_result" = "$n" || func_append rmfiles " $odir/$func_stripname_result.$libext"'
+ # We do not specify a path in Import Files, so LIBPATH fires.
+ shlibpath_overrides_runpath=yes
+ ;;
+ *,no) # both, prefer aix
+ dynamic_linker="AIX lib.a(lib.so.V), lib.so.V($shared_archive_member_spec.o)"
+ library_names_spec='$libname$release.a $libname.a'
+ soname_spec='$libname$release$shared_ext$major'
+ # unpreferred sharedlib libNAME.so.V and symlink libNAME.so need extra handling
+ postinstall_cmds='test -z "$dlname" || $install_shared_prog $dir/$dlname $destdir/$dlname~test -z "$tstripme" || test -z "$striplib" || $striplib $destdir/$dlname~test -n "$linkname" || linkname=$realname~func_stripname "" ".a" "$linkname"~(cd "$destdir" && $LN_S -f $dlname $func_stripname_result.so)'
+ postuninstall_cmds='test -z "$dlname" || func_append rmfiles " $odir/$dlname"~for n in $old_library $library_names; do :; done~func_stripname "" ".a" "$n"~func_append rmfiles " $odir/$func_stripname_result.so"'
+ ;;
+ esac
+ shlibpath_var=LIBPATH
+ fi
+ ;;
+
+amigaos*)
+ case $host_cpu in
+ powerpc)
+ # Since July 2007 AmigaOS4 officially supports .so libraries.
+ # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ ;;
+ m68k)
+ library_names_spec='$libname.ixlibrary $libname.a'
+ # Create ${libname}_ixlibrary.a entries in /sys/libs.
+ finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+ ;;
+ esac
+ ;;
+
+beos*)
+ library_names_spec='$libname$shared_ext'
+ dynamic_linker="$host_os ld.so"
+ shlibpath_var=LIBRARY_PATH
+ ;;
+
+bsdi[45]*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_version=no
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
+ sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
+ # the default ld.so.conf also contains /usr/contrib/lib and
+ # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
+ # libtool to hard-code these into programs
+ ;;
+
+cygwin* | mingw* | pw32* | cegcc*)
+ version_type=windows
+ shrext_cmds=.dll
+ need_version=no
+ need_lib_prefix=no
+
+ case $GCC,$cc_basename in
+ yes,*)
+ # gcc
+ library_names_spec='$libname.dll.a'
+ # DLL is installed to $(libdir)/../bin by postinstall_cmds
+ postinstall_cmds='base_file=`basename \$file`~
+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~
+ dldir=$destdir/`dirname \$dlpath`~
+ test -d \$dldir || mkdir -p \$dldir~
+ $install_prog $dir/$dlname \$dldir/$dlname~
+ chmod a+x \$dldir/$dlname~
+ if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+ eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+ fi'
+ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+ dlpath=$dir/\$dldll~
+ $RM \$dlpath'
+ shlibpath_overrides_runpath=yes
+
+ case $host_os in
+ cygwin*)
+ # Cygwin DLLs use 'cyg' prefix rather than 'lib'
+ soname_spec='`echo $libname | sed -e 's/^lib/cyg/'``echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext'
+
+ ;;
+ mingw* | cegcc*)
+ # MinGW DLLs use traditional 'lib' prefix
+ soname_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext'
+ ;;
+ pw32*)
+ # pw32 DLLs use 'pw' prefix rather than 'lib'
+ library_names_spec='`echo $libname | sed -e 's/^lib/pw/'``echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext'
+ ;;
+ esac
+ dynamic_linker='Win32 ld.exe'
+ ;;
+
+ *,cl*)
+ # Native MSVC
+ libname_spec='$name'
+ soname_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext'
+ library_names_spec='$libname.dll.lib'
+
+ case $build_os in
+ mingw*)
+ sys_lib_search_path_spec=
+ lt_save_ifs=$IFS
+ IFS=';'
+ for lt_path in $LIB
+ do
+ IFS=$lt_save_ifs
+ # Let DOS variable expansion print the short 8.3 style file name.
+ lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"`
+ sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path"
+ done
+ IFS=$lt_save_ifs
+ # Convert to MSYS style.
+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'`
+ ;;
+ cygwin*)
+ # Convert to unix form, then to dos form, then back to unix form
+ # but this time dos style (no spaces!) so that the unix form looks
+ # like /cygdrive/c/PROGRA~1:/cygdr...
+ sys_lib_search_path_spec=`cygpath --path --unix "$LIB"`
+ sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null`
+ sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+ ;;
+ *)
+ sys_lib_search_path_spec=$LIB
+ if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then
+ # It is most probably a Windows format PATH.
+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+ else
+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+ fi
+ # FIXME: find the short name or the path components, as spaces are
+ # common. (e.g. "Program Files" -> "PROGRA~1")
+ ;;
+ esac
+
+ # DLL is installed to $(libdir)/../bin by postinstall_cmds
+ postinstall_cmds='base_file=`basename \$file`~
+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~
+ dldir=$destdir/`dirname \$dlpath`~
+ test -d \$dldir || mkdir -p \$dldir~
+ $install_prog $dir/$dlname \$dldir/$dlname'
+ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+ dlpath=$dir/\$dldll~
+ $RM \$dlpath'
+ shlibpath_overrides_runpath=yes
+ dynamic_linker='Win32 link.exe'
+ ;;
+
+ *)
+ # Assume MSVC wrapper
+ library_names_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext $libname.lib'
+ dynamic_linker='Win32 ld.exe'
+ ;;
+ esac
+ # FIXME: first we should search . and the directory the executable is in
+ shlibpath_var=PATH
+ ;;
+
+darwin* | rhapsody*)
+ dynamic_linker="$host_os dyld"
+ version_type=darwin
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='$libname$release$major$shared_ext $libname$shared_ext'
+ soname_spec='$libname$release$major$shared_ext'
+ shlibpath_overrides_runpath=yes
+ shlibpath_var=DYLD_LIBRARY_PATH
+ shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
+
+ sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
+ ;;
+
+dgux*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ ;;
+
+freebsd* | dragonfly*)
+ # DragonFly does not have aout. When/if they implement a new
+ # versioning mechanism, adjust this.
+ if test -x /usr/bin/objformat; then
+ objformat=`/usr/bin/objformat`
+ else
+ case $host_os in
+ freebsd[23].*) objformat=aout ;;
+ *) objformat=elf ;;
+ esac
+ fi
+ version_type=freebsd-$objformat
+ case $version_type in
+ freebsd-elf*)
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
+ need_version=no
+ need_lib_prefix=no
+ ;;
+ freebsd-*)
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
+ need_version=yes
+ ;;
+ esac
+ shlibpath_var=LD_LIBRARY_PATH
+ case $host_os in
+ freebsd2.*)
+ shlibpath_overrides_runpath=yes
+ ;;
+ freebsd3.[01]* | freebsdelf3.[01]*)
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ ;;
+ freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
+ freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ ;;
+ *) # from 4.6 on, and DragonFly
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ ;;
+ esac
+ ;;
+
+haiku*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_lib_prefix=no
+ need_version=no
+ dynamic_linker="$host_os runtime_loader"
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
+ shlibpath_var=LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
+ hardcode_into_libs=yes
+ ;;
+
+hpux9* | hpux10* | hpux11*)
+ # Give a soname corresponding to the major version so that dld.sl refuses to
+ # link against other versions.
+ version_type=sunos
+ need_lib_prefix=no
+ need_version=no
+ case $host_cpu in
+ ia64*)
+ shrext_cmds='.so'
+ hardcode_into_libs=yes
+ dynamic_linker="$host_os dld.so"
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
+ if test 32 = "$HPUX_IA64_MODE"; then
+ sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+ sys_lib_dlsearch_path_spec=/usr/lib/hpux32
+ else
+ sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+ sys_lib_dlsearch_path_spec=/usr/lib/hpux64
+ fi
+ ;;
+ hppa*64*)
+ shrext_cmds='.sl'
+ hardcode_into_libs=yes
+ dynamic_linker="$host_os dld.sl"
+ shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
+ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
+ sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+ ;;
+ *)
+ shrext_cmds='.sl'
+ dynamic_linker="$host_os dld.sl"
+ shlibpath_var=SHLIB_PATH
+ shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
+ ;;
+ esac
+ # HP-UX runs *really* slowly unless shared libraries are mode 555, ...
+ postinstall_cmds='chmod 555 $lib'
+ # or fails outright, so override atomically:
+ install_override_mode=555
+ ;;
+
+interix[3-9]*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
+ dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ ;;
+
+irix5* | irix6* | nonstopux*)
+ case $host_os in
+ nonstopux*) version_type=nonstopux ;;
+ *)
+ if test yes = "$lt_cv_prog_gnu_ld"; then
+ version_type=linux # correct to gnu/linux during the next big refactor
+ else
+ version_type=irix
+ fi ;;
+ esac
+ need_lib_prefix=no
+ need_version=no
+ soname_spec='$libname$release$shared_ext$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$release$shared_ext $libname$shared_ext'
+ case $host_os in
+ irix5* | nonstopux*)
+ libsuff= shlibsuff=
+ ;;
+ *)
+ case $LD in # libtool.m4 will add one of these switches to LD
+ *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
+ libsuff= shlibsuff= libmagic=32-bit;;
+ *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
+ libsuff=32 shlibsuff=N32 libmagic=N32;;
+ *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
+ libsuff=64 shlibsuff=64 libmagic=64-bit;;
+ *) libsuff= shlibsuff= libmagic=never-match;;
+ esac
+ ;;
+ esac
+ shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
+ shlibpath_overrides_runpath=no
+ sys_lib_search_path_spec="/usr/lib$libsuff /lib$libsuff /usr/local/lib$libsuff"
+ sys_lib_dlsearch_path_spec="/usr/lib$libsuff /lib$libsuff"
+ hardcode_into_libs=yes
+ ;;
+
+# No shared lib support for Linux oldld, aout, or coff.
+linux*oldld* | linux*aout* | linux*coff*)
+ dynamic_linker=no
+ ;;
+
+linux*android*)
+ version_type=none # Android doesn't support versioned libraries.
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='$libname$release$shared_ext'
+ soname_spec='$libname$release$shared_ext'
+ finish_cmds=
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+
+ # This implies no fast_install, which is unacceptable.
+ # Some rework will be needed to allow for fast_install
+ # before this can be enabled.
+ hardcode_into_libs=yes
+
+ dynamic_linker='Android linker'
+ # Don't embed -rpath directories since the linker doesn't support them.
+ hardcode_libdir_flag_spec_CXX='-L$libdir'
+ ;;
+
+# This must be glibc/ELF.
+linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+
+ # Some binutils ld are patched to set DT_RUNPATH
+ if ${lt_cv_shlibpath_overrides_runpath+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_shlibpath_overrides_runpath=no
+ save_LDFLAGS=$LDFLAGS
+ save_libdir=$libdir
+ eval "libdir=/foo; wl=\"$lt_prog_compiler_wl_CXX\"; \
+ LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec_CXX\""
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_link "$LINENO"; then :
+ if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then :
+ lt_cv_shlibpath_overrides_runpath=yes
+fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ LDFLAGS=$save_LDFLAGS
+ libdir=$save_libdir
+
+fi
+
+ shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath
+
+ # This implies no fast_install, which is unacceptable.
+ # Some rework will be needed to allow for fast_install
+ # before this can be enabled.
+ hardcode_into_libs=yes
+
+ # Ideally, we could use ldconfig to report *all* directores which are
+ # searched for libraries, however this is still not possible. Aside from not
+ # being certain /sbin/ldconfig is available, command
+ # 'ldconfig -N -X -v | grep ^/' on 64bit Fedora does not report /usr/lib64,
+ # even though it is searched at run-time. Try to do the best guess by
+ # appending ld.so.conf contents (and includes) to the search path.
+ if test -f /etc/ld.so.conf; then
+ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
+ sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
+ fi
+
+ # We used to test for /lib/ld.so.1 and disable shared libraries on
+ # powerpc, because MkLinux only supported shared libraries with the
+ # GNU dynamic linker. Since this was broken with cross compilers,
+ # most powerpc-linux boxes support dynamic linking these days and
+ # people can always --disable-shared, the test was removed, and we
+ # assume the GNU/Linux dynamic linker is in use.
+ dynamic_linker='GNU/Linux ld.so'
+ ;;
+
+netbsd*)
+ version_type=sunos
+ need_lib_prefix=no
+ need_version=no
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+ dynamic_linker='NetBSD (a.out) ld.so'
+ else
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
+ dynamic_linker='NetBSD ld.elf_so'
+ fi
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ ;;
+
+newsos6)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ ;;
+
+*nto* | *qnx*)
+ version_type=qnx
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ dynamic_linker='ldqnx.so'
+ ;;
+
+openbsd* | bitrig*)
+ version_type=sunos
+ sys_lib_dlsearch_path_spec=/usr/lib
+ need_lib_prefix=no
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then
+ need_version=no
+ else
+ need_version=yes
+ fi
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ ;;
+
+os2*)
+ libname_spec='$name'
+ version_type=windows
+ shrext_cmds=.dll
+ need_version=no
+ need_lib_prefix=no
+ # OS/2 can only load a DLL with a base name of 8 characters or less.
+ soname_spec='`test -n "$os2dllname" && libname="$os2dllname";
+ v=$($ECHO $release$versuffix | tr -d .-);
+ n=$($ECHO $libname | cut -b -$((8 - ${#v})) | tr . _);
+ $ECHO $n$v`$shared_ext'
+ library_names_spec='${libname}_dll.$libext'
+ dynamic_linker='OS/2 ld.exe'
+ shlibpath_var=BEGINLIBPATH
+ sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+ postinstall_cmds='base_file=`basename \$file`~
+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; $ECHO \$dlname'\''`~
+ dldir=$destdir/`dirname \$dlpath`~
+ test -d \$dldir || mkdir -p \$dldir~
+ $install_prog $dir/$dlname \$dldir/$dlname~
+ chmod a+x \$dldir/$dlname~
+ if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+ eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+ fi'
+ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; $ECHO \$dlname'\''`~
+ dlpath=$dir/\$dldll~
+ $RM \$dlpath'
+ ;;
+
+osf3* | osf4* | osf5*)
+ version_type=osf
+ need_lib_prefix=no
+ need_version=no
+ soname_spec='$libname$release$shared_ext$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ shlibpath_var=LD_LIBRARY_PATH
+ sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+ ;;
+
+rdos*)
+ dynamic_linker=no
+ ;;
+
+solaris*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ # ldd complains unless libraries are executable
+ postinstall_cmds='chmod +x $lib'
+ ;;
+
+sunos4*)
+ version_type=sunos
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
+ finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ if test yes = "$with_gnu_ld"; then
+ need_lib_prefix=no
+ fi
+ need_version=yes
+ ;;
+
+sysv4 | sysv4.3*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ case $host_vendor in
+ sni)
+ shlibpath_overrides_runpath=no
+ need_lib_prefix=no
+ runpath_var=LD_RUN_PATH
+ ;;
+ siemens)
+ need_lib_prefix=no
+ ;;
+ motorola)
+ need_lib_prefix=no
+ need_version=no
+ shlibpath_overrides_runpath=no
+ sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
+ ;;
+ esac
+ ;;
+
+sysv4*MP*)
+ if test -d /usr/nec; then
+ version_type=linux # correct to gnu/linux during the next big refactor
+ library_names_spec='$libname$shared_ext.$versuffix $libname$shared_ext.$major $libname$shared_ext'
+ soname_spec='$libname$shared_ext.$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ fi
+ ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+ version_type=sco
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ if test yes = "$with_gnu_ld"; then
+ sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
+ else
+ sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
+ case $host_os in
+ sco3.2v5*)
+ sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
+ ;;
+ esac
+ fi
+ sys_lib_dlsearch_path_spec='/usr/lib'
+ ;;
+
+tpf*)
+ # TPF is a cross-target only. Preferred cross-host = GNU/Linux.
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ ;;
+
+uts4*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ ;;
+
+*)
+ dynamic_linker=no
+ ;;
+esac
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5
+$as_echo "$dynamic_linker" >&6; }
+test no = "$dynamic_linker" && can_build_shared=no
+
+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+if test yes = "$GCC"; then
+ variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+fi
+
+if test set = "${lt_cv_sys_lib_search_path_spec+set}"; then
+ sys_lib_search_path_spec=$lt_cv_sys_lib_search_path_spec
+fi
+
+if test set = "${lt_cv_sys_lib_dlsearch_path_spec+set}"; then
+ sys_lib_dlsearch_path_spec=$lt_cv_sys_lib_dlsearch_path_spec
+fi
+
+# remember unaugmented sys_lib_dlsearch_path content for libtool script decls...
+configure_time_dlsearch_path=$sys_lib_dlsearch_path_spec
+
+# ... but it needs LT_SYS_LIBRARY_PATH munging for other configure-time code
+func_munge_path_list sys_lib_dlsearch_path_spec "$LT_SYS_LIBRARY_PATH"
+
+# to be used as default LT_SYS_LIBRARY_PATH value in generated libtool
+configure_time_lt_sys_library_path=$LT_SYS_LIBRARY_PATH
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5
+$as_echo_n "checking how to hardcode library paths into programs... " >&6; }
+hardcode_action_CXX=
+if test -n "$hardcode_libdir_flag_spec_CXX" ||
+ test -n "$runpath_var_CXX" ||
+ test yes = "$hardcode_automatic_CXX"; then
+
+ # We can hardcode non-existent directories.
+ if test no != "$hardcode_direct_CXX" &&
+ # If the only mechanism to avoid hardcoding is shlibpath_var, we
+ # have to relink, otherwise we might link with an installed library
+ # when we should be linking with a yet-to-be-installed one
+ ## test no != "$_LT_TAGVAR(hardcode_shlibpath_var, CXX)" &&
+ test no != "$hardcode_minus_L_CXX"; then
+ # Linking always hardcodes the temporary library directory.
+ hardcode_action_CXX=relink
+ else
+ # We can link without hardcoding, and we can hardcode nonexisting dirs.
+ hardcode_action_CXX=immediate
+ fi
+else
+ # We cannot hardcode anything, or else we can only hardcode existing
+ # directories.
+ hardcode_action_CXX=unsupported
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action_CXX" >&5
+$as_echo "$hardcode_action_CXX" >&6; }
+
+if test relink = "$hardcode_action_CXX" ||
+ test yes = "$inherit_rpath_CXX"; then
+ # Fast installation is not supported
+ enable_fast_install=no
+elif test yes = "$shlibpath_overrides_runpath" ||
+ test no = "$enable_shared"; then
+ # Fast installation is not necessary
+ enable_fast_install=needless
+fi
+
+
+
+
+
+
+
+ fi # test -n "$compiler"
+
+ CC=$lt_save_CC
+ CFLAGS=$lt_save_CFLAGS
+ LDCXX=$LD
+ LD=$lt_save_LD
+ GCC=$lt_save_GCC
+ with_gnu_ld=$lt_save_with_gnu_ld
+ lt_cv_path_LDCXX=$lt_cv_path_LD
+ lt_cv_path_LD=$lt_save_path_LD
+ lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
+ lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
+fi # test yes != "$_lt_caught_CXX_error"
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ ac_config_commands="$ac_config_commands libtool"
+
+
+
+
+# Only expand once:
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5
+$as_echo_n "checking for ANSI C header files... " >&6; }
+if ${ac_cv_header_stdc+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <stdlib.h>
+#include <stdarg.h>
+#include <string.h>
+#include <float.h>
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_header_stdc=yes
+else
+ ac_cv_header_stdc=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+if test $ac_cv_header_stdc = yes; then
+ # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <string.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ $EGREP "memchr" >/dev/null 2>&1; then :
+
+else
+ ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+ # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <stdlib.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ $EGREP "free" >/dev/null 2>&1; then :
+
+else
+ ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+ # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
+ if test "$cross_compiling" = yes; then :
+ :
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <ctype.h>
+#include <stdlib.h>
+#if ((' ' & 0x0FF) == 0x020)
+# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
+# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
+#else
+# define ISLOWER(c) \
+ (('a' <= (c) && (c) <= 'i') \
+ || ('j' <= (c) && (c) <= 'r') \
+ || ('s' <= (c) && (c) <= 'z'))
+# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
+#endif
+
+#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
+int
+main ()
+{
+ int i;
+ for (i = 0; i < 256; i++)
+ if (XOR (islower (i), ISLOWER (i))
+ || toupper (i) != TOUPPER (i))
+ return 2;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+
+else
+ ac_cv_header_stdc=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+ conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5
+$as_echo "$ac_cv_header_stdc" >&6; }
+if test $ac_cv_header_stdc = yes; then
+
+$as_echo "#define STDC_HEADERS 1" >>confdefs.h
+
+fi
+
+
+
+
+ for ac_header in $ac_header_list
+do :
+ as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
+ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default
+"
+if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
+ cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether utime accepts a null argument" >&5
+$as_echo_n "checking whether utime accepts a null argument... " >&6; }
+if ${ac_cv_func_utime_null+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ rm -f conftest.data; >conftest.data
+# Sequent interprets utime(file, 0) to mean use start of epoch. Wrong.
+if test "$cross_compiling" = yes; then :
+ ac_cv_func_utime_null='guessing yes'
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+$ac_includes_default
+ #ifdef HAVE_UTIME_H
+ # include <utime.h>
+ #endif
+int
+main ()
+{
+struct stat s, t;
+ return ! (stat ("conftest.data", &s) == 0
+ && utime ("conftest.data", 0) == 0
+ && stat ("conftest.data", &t) == 0
+ && t.st_mtime >= s.st_mtime
+ && t.st_mtime - s.st_mtime < 120);
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+ ac_cv_func_utime_null=yes
+else
+ ac_cv_func_utime_null=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+ conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_utime_null" >&5
+$as_echo "$ac_cv_func_utime_null" >&6; }
+if test "x$ac_cv_func_utime_null" != xno; then
+ ac_cv_func_utime_null=yes
+
+$as_echo "#define HAVE_UTIME_NULL 1" >>confdefs.h
+
+fi
+rm -f conftest.data
+
+
+## Set Fortran compiler behaviour
+#if test "x$FCFLAGS" == "x"; then
+# FCFLAGS="-O2"
+#fi
+## Try to respect users' Fortran compiler variables
+#if test "x$FC" == "x"; then
+# if test "x$F77" == "x"; then
+#FC="$GFORTRAN"
+#FC=gfortran
+# else
+# FC="$F77"
+# fi
+#fi
+
+# Require full C++11 functionality, which has been supported by gcc since version 4.8.1
+# If the following macro is not found, you might want to install the autoconf-archive
+# package and repeat the 'autoreconf -i' step.
+AX_CXX_COMPILE_STDCXX_11
+
+CERNROOT_LDFLAGS=
+ROOT_LDFLAGS=
+ROOT_CFLAGS=
+ROOT_LIBS=
+
+# Extract the first word of "root", so it can be a program name with args.
+set dummy root; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_path_ROOTPATH+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $ROOTPATH in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_ROOTPATH="$ROOTPATH" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_path_ROOTPATH="$as_dir/$ac_word$ac_exec_ext"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ test -z "$ac_cv_path_ROOTPATH" && ac_cv_path_ROOTPATH="no"
+ ;;
+esac
+fi
+ROOTPATH=$ac_cv_path_ROOTPATH
+if test -n "$ROOTPATH"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ROOTPATH" >&5
+$as_echo "$ROOTPATH" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+if test "$ROOTPATH" = "no"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: ****************************************************" >&5
+$as_echo "$as_me: WARNING: ****************************************************" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: " >&5
+$as_echo "$as_me: WARNING: " >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: root was not found - needed for applgrid storage" >&5
+$as_echo "$as_me: WARNING: root was not found - needed for applgrid storage" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: " >&5
+$as_echo "$as_me: WARNING: " >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: ****************************************************" >&5
+$as_echo "$as_me: WARNING: ****************************************************" >&2;}
+else
+ CERNROOT_LDFLAGS=$(root-config --nonew --ldflags --libs)
+ ROOT_LDFLAGS=$(root-config --ldflags)
+ ROOT_CFLAGS=$(root-config --cflags)
+ ROOT_LIBS=$(root-config --nonew --libs)
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_CERNROOT 1
+_ACEOF
+
+fi
+
+APPLGRID_LDFLAGS=
+APPLGRID_CXXFLAGS=
+
+# Extract the first word of "applgrid-config", so it can be a program name with args.
+set dummy applgrid-config; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_path_APPLPATH+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $APPLPATH in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_APPLPATH="$APPLPATH" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_path_APPLPATH="$as_dir/$ac_word$ac_exec_ext"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ test -z "$ac_cv_path_APPLPATH" && ac_cv_path_APPLPATH="no"
+ ;;
+esac
+fi
+APPLPATH=$ac_cv_path_APPLPATH
+if test -n "$APPLPATH"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $APPLPATH" >&5
+$as_echo "$APPLPATH" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+if test "$APPLPATH" = "no"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: ****************************************************************************" >&5
+$as_echo "$as_me: WARNING: ****************************************************************************" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: " >&5
+$as_echo "$as_me: WARNING: " >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: APPLgrid was not found - you will not be able to create applgrid grids ! " >&5
+$as_echo "$as_me: WARNING: APPLgrid was not found - you will not be able to create applgrid grids ! " >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: " >&5
+$as_echo "$as_me: WARNING: " >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: ****************************************************************************" >&5
+$as_echo "$as_me: WARNING: ****************************************************************************" >&2;}
+# Even if installed, use ROOT only if APPLgrid present
+ CERNROOT_LDFLAGS=
+ ROOT_LDFLAGS=
+ ROOT_CFLAGS=
+ ROOT_LIBS=
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_CERNROOT 0
+_ACEOF
+
+else
+ APPLGRID_LDFLAGS=$(applgrid-config --ldflags)
+ APPLGRID_CXXFLAGS=$(applgrid-config --cxxflags)
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_APPL 1
+_ACEOF
+
+fi
+
+
+
+
+
+ if test "$ROOTPATH" != "no" ; then
+ USE_CERNROOT_TRUE=
+ USE_CERNROOT_FALSE='#'
+else
+ USE_CERNROOT_TRUE='#'
+ USE_CERNROOT_FALSE=
+fi
+
+
+
+
+ if test "$APPLPATH" != "no" ; then
+ USE_APPLGRID_TRUE=
+ USE_APPLGRID_FALSE='#'
+else
+ USE_APPLGRID_TRUE='#'
+ USE_APPLGRID_FALSE=
+fi
+
+
+
+FASTNLO_LDFLAGS=
+FASTNLO_CXXFLAGS=
+
+# Extract the first word of "fnlo-tk-config", so it can be a program name with args.
+set dummy fnlo-tk-config; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_path_FASTNLOPATH+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $FASTNLOPATH in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_FASTNLOPATH="$FASTNLOPATH" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_path_FASTNLOPATH="$as_dir/$ac_word$ac_exec_ext"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ test -z "$ac_cv_path_FASTNLOPATH" && ac_cv_path_FASTNLOPATH="no"
+ ;;
+esac
+fi
+FASTNLOPATH=$ac_cv_path_FASTNLOPATH
+if test -n "$FASTNLOPATH"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $FASTNLOPATH" >&5
+$as_echo "$FASTNLOPATH" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+if test "$FASTNLOPATH" = "no"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: **************************************************************************" >&5
+$as_echo "$as_me: WARNING: **************************************************************************" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: " >&5
+$as_echo "$as_me: WARNING: " >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: fastNLO was not found - you will not be able to create fastNLO grids ! " >&5
+$as_echo "$as_me: WARNING: fastNLO was not found - you will not be able to create fastNLO grids ! " >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: " >&5
+$as_echo "$as_me: WARNING: " >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: **************************************************************************" >&5
+$as_echo "$as_me: WARNING: **************************************************************************" >&2;}
+else
+ FASTNLO_LDFLAGS=$(fnlo-tk-config --ldflags)
+ FASTNLO_CXXFLAGS=$(fnlo-tk-config --cppflags)
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_FASTNLO 1
+_ACEOF
+
+fi
+
+
+
+ if test "$FASTNLOPATH" != "no" ; then
+ USE_FASTNLO_TRUE=
+ USE_FASTNLO_FALSE='#'
+else
+ USE_FASTNLO_TRUE='#'
+ USE_FASTNLO_FALSE=
+fi
+
+
+
+ac_config_files="$ac_config_files bin/Makefile bin/nnlo-config"
+
+
+
+ac_config_files="$ac_config_files Makefile src/Makefile"
+
+cat >confcache <<\_ACEOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs, see configure's option --config-cache.
+# It is not useful on other systems. If it contains results you don't
+# want to keep, you may remove or edit it.
+#
+# config.status only pays attention to the cache file if you give it
+# the --recheck option to rerun configure.
+#
+# `ac_cv_env_foo' variables (set or unset) will be overridden when
+# loading this file, other *unset* `ac_cv_foo' will be assigned the
+# following values.
+
+_ACEOF
+
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, we kill variables containing newlines.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+(
+ for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do
+ eval ac_val=\$$ac_var
+ case $ac_val in #(
+ *${as_nl}*)
+ case $ac_var in #(
+ *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
+ esac
+ case $ac_var in #(
+ _ | IFS | as_nl) ;; #(
+ BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
+ *) { eval $ac_var=; unset $ac_var;} ;;
+ esac ;;
+ esac
+ done
+
+ (set) 2>&1 |
+ case $as_nl`(ac_space=' '; set) 2>&1` in #(
+ *${as_nl}ac_space=\ *)
+ # `set' does not quote correctly, so add quotes: double-quote
+ # substitution turns \\\\ into \\, and sed turns \\ into \.
+ sed -n \
+ "s/'/'\\\\''/g;
+ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
+ ;; #(
+ *)
+ # `set' quotes correctly as required by POSIX, so do not add quotes.
+ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
+ ;;
+ esac |
+ sort
+) |
+ sed '
+ /^ac_cv_env_/b end
+ t clear
+ :clear
+ s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
+ t end
+ s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
+ :end' >>confcache
+if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
+ if test -w "$cache_file"; then
+ if test "x$cache_file" != "x/dev/null"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5
+$as_echo "$as_me: updating cache $cache_file" >&6;}
+ if test ! -f "$cache_file" || test -h "$cache_file"; then
+ cat confcache >"$cache_file"
+ else
+ case $cache_file in #(
+ */* | ?:*)
+ mv -f confcache "$cache_file"$$ &&
+ mv -f "$cache_file"$$ "$cache_file" ;; #(
+ *)
+ mv -f confcache "$cache_file" ;;
+ esac
+ fi
+ fi
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5
+$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;}
+ fi
+fi
+rm -f confcache
+
+test "x$prefix" = xNONE && prefix=$ac_default_prefix
+# Let make expand exec_prefix.
+test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
+
+DEFS=-DHAVE_CONFIG_H
+
+ac_libobjs=
+ac_ltlibobjs=
+for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
+ # 1. Remove the extension, and $U if already installed.
+ ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
+ ac_i=`$as_echo "$ac_i" | sed "$ac_script"`
+ # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR
+ # will be set to the directory where LIBOBJS objects are built.
+ as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext"
+ as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo'
+done
+LIBOBJS=$ac_libobjs
+
+LTLIBOBJS=$ac_ltlibobjs
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking that generated files are newer than configure" >&5
+$as_echo_n "checking that generated files are newer than configure... " >&6; }
+ if test -n "$am_sleep_pid"; then
+ # Hide warnings about reused PIDs.
+ wait $am_sleep_pid 2>/dev/null
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: done" >&5
+$as_echo "done" >&6; }
+ if test -n "$EXEEXT"; then
+ am__EXEEXT_TRUE=
+ am__EXEEXT_FALSE='#'
+else
+ am__EXEEXT_TRUE='#'
+ am__EXEEXT_FALSE=
+fi
+
+if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then
+ as_fn_error $? "conditional \"AMDEP\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
+ as_fn_error $? "conditional \"am__fastdepCC\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${am__fastdepCXX_TRUE}" && test -z "${am__fastdepCXX_FALSE}"; then
+ as_fn_error $? "conditional \"am__fastdepCXX\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${USE_CERNROOT_TRUE}" && test -z "${USE_CERNROOT_FALSE}"; then
+ as_fn_error $? "conditional \"USE_CERNROOT\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${USE_APPLGRID_TRUE}" && test -z "${USE_APPLGRID_FALSE}"; then
+ as_fn_error $? "conditional \"USE_APPLGRID\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${USE_FASTNLO_TRUE}" && test -z "${USE_FASTNLO_FALSE}"; then
+ as_fn_error $? "conditional \"USE_FASTNLO\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+
+: "${CONFIG_STATUS=./config.status}"
+ac_write_fail=0
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files $CONFIG_STATUS"
+{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5
+$as_echo "$as_me: creating $CONFIG_STATUS" >&6;}
+as_write_fail=0
+cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1
+#! $SHELL
+# Generated by $as_me.
+# Run this file to recreate the current configuration.
+# Compiler output produced by configure, useful for debugging
+# configure, is in config.log if it exists.
+
+debug=false
+ac_cs_recheck=false
+ac_cs_silent=false
+
+SHELL=\${CONFIG_SHELL-$SHELL}
+export SHELL
+_ASEOF
+cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
+ emulate sh
+ NULLCMD=:
+ # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '${1+"$@"}'='"$@"'
+ setopt NO_GLOB_SUBST
+else
+ case `(set -o) 2>/dev/null` in #(
+ *posix*) :
+ set -o posix ;; #(
+ *) :
+ ;;
+esac
+fi
+
+
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+# Prefer a ksh shell builtin over an external printf program on Solaris,
+# but without wasting forks for bash or zsh.
+if test -z "$BASH_VERSION$ZSH_VERSION" \
+ && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
+ as_echo='print -r --'
+ as_echo_n='print -rn --'
+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+ as_echo='printf %s\n'
+ as_echo_n='printf %s'
+else
+ if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+ as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+ as_echo_n='/usr/ucb/echo -n'
+ else
+ as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+ as_echo_n_body='eval
+ arg=$1;
+ case $arg in #(
+ *"$as_nl"*)
+ expr "X$arg" : "X\\(.*\\)$as_nl";
+ arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+ esac;
+ expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+ '
+ export as_echo_n_body
+ as_echo_n='sh -c $as_echo_n_body as_echo'
+ fi
+ export as_echo_body
+ as_echo='sh -c $as_echo_body as_echo'
+fi
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ PATH_SEPARATOR=:
+ (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+ (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+ PATH_SEPARATOR=';'
+ }
+fi
+
+
+# IFS
+# We need space, tab and new line, in precisely that order. Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+IFS=" "" $as_nl"
+
+# Find who we are. Look in the path if we contain no directory separator.
+as_myself=
+case $0 in #((
+ *[\\/]* ) as_myself=$0 ;;
+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+ as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+ $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+ exit 1
+fi
+
+# Unset variables that we do not need and which cause bugs (e.g. in
+# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1"
+# suppresses any "Segmentation fault" message there. '((' could
+# trigger a bug in pdksh 5.2.14.
+for as_var in BASH_ENV ENV MAIL MAILPATH
+do eval test x\${$as_var+set} = xset \
+ && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
+done
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
+
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+
+# as_fn_error STATUS ERROR [LINENO LOG_FD]
+# ----------------------------------------
+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
+# script with STATUS, using 1 if that was 0.
+as_fn_error ()
+{
+ as_status=$1; test $as_status -eq 0 && as_status=1
+ if test "$4"; then
+ as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
+ fi
+ $as_echo "$as_me: error: $2" >&2
+ as_fn_exit $as_status
+} # as_fn_error
+
+
+# as_fn_set_status STATUS
+# -----------------------
+# Set $? to STATUS, without forking.
+as_fn_set_status ()
+{
+ return $1
+} # as_fn_set_status
+
+# as_fn_exit STATUS
+# -----------------
+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
+as_fn_exit ()
+{
+ set +e
+ as_fn_set_status $1
+ exit $1
+} # as_fn_exit
+
+# as_fn_unset VAR
+# ---------------
+# Portably unset VAR.
+as_fn_unset ()
+{
+ { eval $1=; unset $1;}
+}
+as_unset=as_fn_unset
+# as_fn_append VAR VALUE
+# ----------------------
+# Append the text in VALUE to the end of the definition contained in VAR. Take
+# advantage of any shell optimizations that allow amortized linear growth over
+# repeated appends, instead of the typical quadratic growth present in naive
+# implementations.
+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
+ eval 'as_fn_append ()
+ {
+ eval $1+=\$2
+ }'
+else
+ as_fn_append ()
+ {
+ eval $1=\$$1\$2
+ }
+fi # as_fn_append
+
+# as_fn_arith ARG...
+# ------------------
+# Perform arithmetic evaluation on the ARGs, and store the result in the
+# global $as_val. Take advantage of shells that can avoid forks. The arguments
+# must be portable across $(()) and expr.
+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
+ eval 'as_fn_arith ()
+ {
+ as_val=$(( $* ))
+ }'
+else
+ as_fn_arith ()
+ {
+ as_val=`expr "$@" || test $? -eq 1`
+ }
+fi # as_fn_arith
+
+
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+ test "X`expr 00001 : '.*\(...\)'`" = X001; then
+ as_expr=expr
+else
+ as_expr=false
+fi
+
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+ as_basename=basename
+else
+ as_basename=false
+fi
+
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+ as_dirname=dirname
+else
+ as_dirname=false
+fi
+
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+ X"$0" : 'X\(//\)$' \| \
+ X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X/"$0" |
+ sed '/^.*\/\([^/][^/]*\)\/*$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in #(((((
+-n*)
+ case `echo 'xy\c'` in
+ *c*) ECHO_T=' ';; # ECHO_T is single tab character.
+ xy) ECHO_C='\c';;
+ *) echo `echo ksh88 bug on AIX 6.1` > /dev/null
+ ECHO_T=' ';;
+ esac;;
+*)
+ ECHO_N='-n';;
+esac
+
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+ rm -f conf$$.dir/conf$$.file
+else
+ rm -f conf$$.dir
+ mkdir conf$$.dir 2>/dev/null
+fi
+if (echo >conf$$.file) 2>/dev/null; then
+ if ln -s conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s='ln -s'
+ # ... but there are two gotchas:
+ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+ # In both cases, we have to default to `cp -pR'.
+ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+ as_ln_s='cp -pR'
+ elif ln conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s=ln
+ else
+ as_ln_s='cp -pR'
+ fi
+else
+ as_ln_s='cp -pR'
+fi
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
+
+
+# as_fn_mkdir_p
+# -------------
+# Create "$as_dir" as a directory, including parents if necessary.
+as_fn_mkdir_p ()
+{
+
+ case $as_dir in #(
+ -*) as_dir=./$as_dir;;
+ esac
+ test -d "$as_dir" || eval $as_mkdir_p || {
+ as_dirs=
+ while :; do
+ case $as_dir in #(
+ *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+ *) as_qdir=$as_dir;;
+ esac
+ as_dirs="'$as_qdir' $as_dirs"
+ as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$as_dir" : 'X\(//\)[^/]' \| \
+ X"$as_dir" : 'X\(//\)$' \| \
+ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_dir" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ test -d "$as_dir" && break
+ done
+ test -z "$as_dirs" || eval "mkdir $as_dirs"
+ } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
+
+
+} # as_fn_mkdir_p
+if mkdir -p . 2>/dev/null; then
+ as_mkdir_p='mkdir -p "$as_dir"'
+else
+ test -d ./-p && rmdir ./-p
+ as_mkdir_p=false
+fi
+
+
+# as_fn_executable_p FILE
+# -----------------------
+# Test if FILE is an executable regular file.
+as_fn_executable_p ()
+{
+ test -f "$1" && test -x "$1"
+} # as_fn_executable_p
+as_test_x='test -x'
+as_executable_p=as_fn_executable_p
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+
+exec 6>&1
+## ----------------------------------- ##
+## Main body of $CONFIG_STATUS script. ##
+## ----------------------------------- ##
+_ASEOF
+test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# Save the log message, to keep $0 and so on meaningful, and to
+# report actual input values of CONFIG_FILES etc. instead of their
+# values after options handling.
+ac_log="
+This file was extended by nnlo-bridge $as_me 0.0.44, which was
+generated by GNU Autoconf 2.69. Invocation command line was
+
+ CONFIG_FILES = $CONFIG_FILES
+ CONFIG_HEADERS = $CONFIG_HEADERS
+ CONFIG_LINKS = $CONFIG_LINKS
+ CONFIG_COMMANDS = $CONFIG_COMMANDS
+ $ $0 $@
+
+on `(hostname || uname -n) 2>/dev/null | sed 1q`
+"
+
+_ACEOF
+
+case $ac_config_files in *"
+"*) set x $ac_config_files; shift; ac_config_files=$*;;
+esac
+
+case $ac_config_headers in *"
+"*) set x $ac_config_headers; shift; ac_config_headers=$*;;
+esac
+
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+# Files that config.status was made for.
+config_files="$ac_config_files"
+config_headers="$ac_config_headers"
+config_commands="$ac_config_commands"
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+ac_cs_usage="\
+\`$as_me' instantiates files and other configuration actions
+from templates according to the current configuration. Unless the files
+and actions are specified as TAGs, all are instantiated by default.
+
+Usage: $0 [OPTION]... [TAG]...
+
+ -h, --help print this help, then exit
+ -V, --version print version number and configuration settings, then exit
+ --config print configuration, then exit
+ -q, --quiet, --silent
+ do not print progress messages
+ -d, --debug don't remove temporary files
+ --recheck update $as_me by reconfiguring in the same conditions
+ --file=FILE[:TEMPLATE]
+ instantiate the configuration file FILE
+ --header=FILE[:TEMPLATE]
+ instantiate the configuration header FILE
+
+Configuration files:
+$config_files
+
+Configuration headers:
+$config_headers
+
+Configuration commands:
+$config_commands
+
+Report bugs to <sutt@cern.ch>.
+nnlo-bridge home page: <http://applgrid.hepforge.org>."
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
+ac_cs_version="\\
+nnlo-bridge config.status 0.0.44
+configured by $0, generated by GNU Autoconf 2.69,
+ with options \\"\$ac_cs_config\\"
+
+Copyright (C) 2012 Free Software Foundation, Inc.
+This config.status script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it."
+
+ac_pwd='$ac_pwd'
+srcdir='$srcdir'
+INSTALL='$INSTALL'
+MKDIR_P='$MKDIR_P'
+AWK='$AWK'
+test -n "\$AWK" || AWK=awk
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# The default lists apply if the user does not specify any file.
+ac_need_defaults=:
+while test $# != 0
+do
+ case $1 in
+ --*=?*)
+ ac_option=`expr "X$1" : 'X\([^=]*\)='`
+ ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
+ ac_shift=:
+ ;;
+ --*=)
+ ac_option=`expr "X$1" : 'X\([^=]*\)='`
+ ac_optarg=
+ ac_shift=:
+ ;;
+ *)
+ ac_option=$1
+ ac_optarg=$2
+ ac_shift=shift
+ ;;
+ esac
+
+ case $ac_option in
+ # Handling of the options.
+ -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
+ ac_cs_recheck=: ;;
+ --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
+ $as_echo "$ac_cs_version"; exit ;;
+ --config | --confi | --conf | --con | --co | --c )
+ $as_echo "$ac_cs_config"; exit ;;
+ --debug | --debu | --deb | --de | --d | -d )
+ debug=: ;;
+ --file | --fil | --fi | --f )
+ $ac_shift
+ case $ac_optarg in
+ *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
+ '') as_fn_error $? "missing file argument" ;;
+ esac
+ as_fn_append CONFIG_FILES " '$ac_optarg'"
+ ac_need_defaults=false;;
+ --header | --heade | --head | --hea )
+ $ac_shift
+ case $ac_optarg in
+ *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
+ esac
+ as_fn_append CONFIG_HEADERS " '$ac_optarg'"
+ ac_need_defaults=false;;
+ --he | --h)
+ # Conflict between --help and --header
+ as_fn_error $? "ambiguous option: \`$1'
+Try \`$0 --help' for more information.";;
+ --help | --hel | -h )
+ $as_echo "$ac_cs_usage"; exit ;;
+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+ | -silent | --silent | --silen | --sile | --sil | --si | --s)
+ ac_cs_silent=: ;;
+
+ # This is an error.
+ -*) as_fn_error $? "unrecognized option: \`$1'
+Try \`$0 --help' for more information." ;;
+
+ *) as_fn_append ac_config_targets " $1"
+ ac_need_defaults=false ;;
+
+ esac
+ shift
+done
+
+ac_configure_extra_args=
+
+if $ac_cs_silent; then
+ exec 6>/dev/null
+ ac_configure_extra_args="$ac_configure_extra_args --silent"
+fi
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+if \$ac_cs_recheck; then
+ set X $SHELL '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+ shift
+ \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6
+ CONFIG_SHELL='$SHELL'
+ export CONFIG_SHELL
+ exec "\$@"
+fi
+
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+exec 5>>config.log
+{
+ echo
+ sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
+## Running $as_me. ##
+_ASBOX
+ $as_echo "$ac_log"
+} >&5
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+#
+# INIT-COMMANDS
+#
+AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
+
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+sed_quote_subst='$sed_quote_subst'
+double_quote_subst='$double_quote_subst'
+delay_variable_subst='$delay_variable_subst'
+macro_version='`$ECHO "$macro_version" | $SED "$delay_single_quote_subst"`'
+macro_revision='`$ECHO "$macro_revision" | $SED "$delay_single_quote_subst"`'
+enable_shared='`$ECHO "$enable_shared" | $SED "$delay_single_quote_subst"`'
+enable_static='`$ECHO "$enable_static" | $SED "$delay_single_quote_subst"`'
+pic_mode='`$ECHO "$pic_mode" | $SED "$delay_single_quote_subst"`'
+enable_fast_install='`$ECHO "$enable_fast_install" | $SED "$delay_single_quote_subst"`'
+shared_archive_member_spec='`$ECHO "$shared_archive_member_spec" | $SED "$delay_single_quote_subst"`'
+SHELL='`$ECHO "$SHELL" | $SED "$delay_single_quote_subst"`'
+ECHO='`$ECHO "$ECHO" | $SED "$delay_single_quote_subst"`'
+PATH_SEPARATOR='`$ECHO "$PATH_SEPARATOR" | $SED "$delay_single_quote_subst"`'
+host_alias='`$ECHO "$host_alias" | $SED "$delay_single_quote_subst"`'
+host='`$ECHO "$host" | $SED "$delay_single_quote_subst"`'
+host_os='`$ECHO "$host_os" | $SED "$delay_single_quote_subst"`'
+build_alias='`$ECHO "$build_alias" | $SED "$delay_single_quote_subst"`'
+build='`$ECHO "$build" | $SED "$delay_single_quote_subst"`'
+build_os='`$ECHO "$build_os" | $SED "$delay_single_quote_subst"`'
+SED='`$ECHO "$SED" | $SED "$delay_single_quote_subst"`'
+Xsed='`$ECHO "$Xsed" | $SED "$delay_single_quote_subst"`'
+GREP='`$ECHO "$GREP" | $SED "$delay_single_quote_subst"`'
+EGREP='`$ECHO "$EGREP" | $SED "$delay_single_quote_subst"`'
+FGREP='`$ECHO "$FGREP" | $SED "$delay_single_quote_subst"`'
+LD='`$ECHO "$LD" | $SED "$delay_single_quote_subst"`'
+NM='`$ECHO "$NM" | $SED "$delay_single_quote_subst"`'
+LN_S='`$ECHO "$LN_S" | $SED "$delay_single_quote_subst"`'
+max_cmd_len='`$ECHO "$max_cmd_len" | $SED "$delay_single_quote_subst"`'
+ac_objext='`$ECHO "$ac_objext" | $SED "$delay_single_quote_subst"`'
+exeext='`$ECHO "$exeext" | $SED "$delay_single_quote_subst"`'
+lt_unset='`$ECHO "$lt_unset" | $SED "$delay_single_quote_subst"`'
+lt_SP2NL='`$ECHO "$lt_SP2NL" | $SED "$delay_single_quote_subst"`'
+lt_NL2SP='`$ECHO "$lt_NL2SP" | $SED "$delay_single_quote_subst"`'
+lt_cv_to_host_file_cmd='`$ECHO "$lt_cv_to_host_file_cmd" | $SED "$delay_single_quote_subst"`'
+lt_cv_to_tool_file_cmd='`$ECHO "$lt_cv_to_tool_file_cmd" | $SED "$delay_single_quote_subst"`'
+reload_flag='`$ECHO "$reload_flag" | $SED "$delay_single_quote_subst"`'
+reload_cmds='`$ECHO "$reload_cmds" | $SED "$delay_single_quote_subst"`'
+OBJDUMP='`$ECHO "$OBJDUMP" | $SED "$delay_single_quote_subst"`'
+deplibs_check_method='`$ECHO "$deplibs_check_method" | $SED "$delay_single_quote_subst"`'
+file_magic_cmd='`$ECHO "$file_magic_cmd" | $SED "$delay_single_quote_subst"`'
+file_magic_glob='`$ECHO "$file_magic_glob" | $SED "$delay_single_quote_subst"`'
+want_nocaseglob='`$ECHO "$want_nocaseglob" | $SED "$delay_single_quote_subst"`'
+DLLTOOL='`$ECHO "$DLLTOOL" | $SED "$delay_single_quote_subst"`'
+sharedlib_from_linklib_cmd='`$ECHO "$sharedlib_from_linklib_cmd" | $SED "$delay_single_quote_subst"`'
+AR='`$ECHO "$AR" | $SED "$delay_single_quote_subst"`'
+AR_FLAGS='`$ECHO "$AR_FLAGS" | $SED "$delay_single_quote_subst"`'
+archiver_list_spec='`$ECHO "$archiver_list_spec" | $SED "$delay_single_quote_subst"`'
+STRIP='`$ECHO "$STRIP" | $SED "$delay_single_quote_subst"`'
+RANLIB='`$ECHO "$RANLIB" | $SED "$delay_single_quote_subst"`'
+old_postinstall_cmds='`$ECHO "$old_postinstall_cmds" | $SED "$delay_single_quote_subst"`'
+old_postuninstall_cmds='`$ECHO "$old_postuninstall_cmds" | $SED "$delay_single_quote_subst"`'
+old_archive_cmds='`$ECHO "$old_archive_cmds" | $SED "$delay_single_quote_subst"`'
+lock_old_archive_extraction='`$ECHO "$lock_old_archive_extraction" | $SED "$delay_single_quote_subst"`'
+CC='`$ECHO "$CC" | $SED "$delay_single_quote_subst"`'
+CFLAGS='`$ECHO "$CFLAGS" | $SED "$delay_single_quote_subst"`'
+compiler='`$ECHO "$compiler" | $SED "$delay_single_quote_subst"`'
+GCC='`$ECHO "$GCC" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_pipe='`$ECHO "$lt_cv_sys_global_symbol_pipe" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_cdecl='`$ECHO "$lt_cv_sys_global_symbol_to_cdecl" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_import='`$ECHO "$lt_cv_sys_global_symbol_to_import" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $SED "$delay_single_quote_subst"`'
+lt_cv_nm_interface='`$ECHO "$lt_cv_nm_interface" | $SED "$delay_single_quote_subst"`'
+nm_file_list_spec='`$ECHO "$nm_file_list_spec" | $SED "$delay_single_quote_subst"`'
+lt_sysroot='`$ECHO "$lt_sysroot" | $SED "$delay_single_quote_subst"`'
+lt_cv_truncate_bin='`$ECHO "$lt_cv_truncate_bin" | $SED "$delay_single_quote_subst"`'
+objdir='`$ECHO "$objdir" | $SED "$delay_single_quote_subst"`'
+MAGIC_CMD='`$ECHO "$MAGIC_CMD" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_no_builtin_flag='`$ECHO "$lt_prog_compiler_no_builtin_flag" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_pic='`$ECHO "$lt_prog_compiler_pic" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_wl='`$ECHO "$lt_prog_compiler_wl" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_static='`$ECHO "$lt_prog_compiler_static" | $SED "$delay_single_quote_subst"`'
+lt_cv_prog_compiler_c_o='`$ECHO "$lt_cv_prog_compiler_c_o" | $SED "$delay_single_quote_subst"`'
+need_locks='`$ECHO "$need_locks" | $SED "$delay_single_quote_subst"`'
+MANIFEST_TOOL='`$ECHO "$MANIFEST_TOOL" | $SED "$delay_single_quote_subst"`'
+DSYMUTIL='`$ECHO "$DSYMUTIL" | $SED "$delay_single_quote_subst"`'
+NMEDIT='`$ECHO "$NMEDIT" | $SED "$delay_single_quote_subst"`'
+LIPO='`$ECHO "$LIPO" | $SED "$delay_single_quote_subst"`'
+OTOOL='`$ECHO "$OTOOL" | $SED "$delay_single_quote_subst"`'
+OTOOL64='`$ECHO "$OTOOL64" | $SED "$delay_single_quote_subst"`'
+libext='`$ECHO "$libext" | $SED "$delay_single_quote_subst"`'
+shrext_cmds='`$ECHO "$shrext_cmds" | $SED "$delay_single_quote_subst"`'
+extract_expsyms_cmds='`$ECHO "$extract_expsyms_cmds" | $SED "$delay_single_quote_subst"`'
+archive_cmds_need_lc='`$ECHO "$archive_cmds_need_lc" | $SED "$delay_single_quote_subst"`'
+enable_shared_with_static_runtimes='`$ECHO "$enable_shared_with_static_runtimes" | $SED "$delay_single_quote_subst"`'
+export_dynamic_flag_spec='`$ECHO "$export_dynamic_flag_spec" | $SED "$delay_single_quote_subst"`'
+whole_archive_flag_spec='`$ECHO "$whole_archive_flag_spec" | $SED "$delay_single_quote_subst"`'
+compiler_needs_object='`$ECHO "$compiler_needs_object" | $SED "$delay_single_quote_subst"`'
+old_archive_from_new_cmds='`$ECHO "$old_archive_from_new_cmds" | $SED "$delay_single_quote_subst"`'
+old_archive_from_expsyms_cmds='`$ECHO "$old_archive_from_expsyms_cmds" | $SED "$delay_single_quote_subst"`'
+archive_cmds='`$ECHO "$archive_cmds" | $SED "$delay_single_quote_subst"`'
+archive_expsym_cmds='`$ECHO "$archive_expsym_cmds" | $SED "$delay_single_quote_subst"`'
+module_cmds='`$ECHO "$module_cmds" | $SED "$delay_single_quote_subst"`'
+module_expsym_cmds='`$ECHO "$module_expsym_cmds" | $SED "$delay_single_quote_subst"`'
+with_gnu_ld='`$ECHO "$with_gnu_ld" | $SED "$delay_single_quote_subst"`'
+allow_undefined_flag='`$ECHO "$allow_undefined_flag" | $SED "$delay_single_quote_subst"`'
+no_undefined_flag='`$ECHO "$no_undefined_flag" | $SED "$delay_single_quote_subst"`'
+hardcode_libdir_flag_spec='`$ECHO "$hardcode_libdir_flag_spec" | $SED "$delay_single_quote_subst"`'
+hardcode_libdir_separator='`$ECHO "$hardcode_libdir_separator" | $SED "$delay_single_quote_subst"`'
+hardcode_direct='`$ECHO "$hardcode_direct" | $SED "$delay_single_quote_subst"`'
+hardcode_direct_absolute='`$ECHO "$hardcode_direct_absolute" | $SED "$delay_single_quote_subst"`'
+hardcode_minus_L='`$ECHO "$hardcode_minus_L" | $SED "$delay_single_quote_subst"`'
+hardcode_shlibpath_var='`$ECHO "$hardcode_shlibpath_var" | $SED "$delay_single_quote_subst"`'
+hardcode_automatic='`$ECHO "$hardcode_automatic" | $SED "$delay_single_quote_subst"`'
+inherit_rpath='`$ECHO "$inherit_rpath" | $SED "$delay_single_quote_subst"`'
+link_all_deplibs='`$ECHO "$link_all_deplibs" | $SED "$delay_single_quote_subst"`'
+always_export_symbols='`$ECHO "$always_export_symbols" | $SED "$delay_single_quote_subst"`'
+export_symbols_cmds='`$ECHO "$export_symbols_cmds" | $SED "$delay_single_quote_subst"`'
+exclude_expsyms='`$ECHO "$exclude_expsyms" | $SED "$delay_single_quote_subst"`'
+include_expsyms='`$ECHO "$include_expsyms" | $SED "$delay_single_quote_subst"`'
+prelink_cmds='`$ECHO "$prelink_cmds" | $SED "$delay_single_quote_subst"`'
+postlink_cmds='`$ECHO "$postlink_cmds" | $SED "$delay_single_quote_subst"`'
+file_list_spec='`$ECHO "$file_list_spec" | $SED "$delay_single_quote_subst"`'
+variables_saved_for_relink='`$ECHO "$variables_saved_for_relink" | $SED "$delay_single_quote_subst"`'
+need_lib_prefix='`$ECHO "$need_lib_prefix" | $SED "$delay_single_quote_subst"`'
+need_version='`$ECHO "$need_version" | $SED "$delay_single_quote_subst"`'
+version_type='`$ECHO "$version_type" | $SED "$delay_single_quote_subst"`'
+runpath_var='`$ECHO "$runpath_var" | $SED "$delay_single_quote_subst"`'
+shlibpath_var='`$ECHO "$shlibpath_var" | $SED "$delay_single_quote_subst"`'
+shlibpath_overrides_runpath='`$ECHO "$shlibpath_overrides_runpath" | $SED "$delay_single_quote_subst"`'
+libname_spec='`$ECHO "$libname_spec" | $SED "$delay_single_quote_subst"`'
+library_names_spec='`$ECHO "$library_names_spec" | $SED "$delay_single_quote_subst"`'
+soname_spec='`$ECHO "$soname_spec" | $SED "$delay_single_quote_subst"`'
+install_override_mode='`$ECHO "$install_override_mode" | $SED "$delay_single_quote_subst"`'
+postinstall_cmds='`$ECHO "$postinstall_cmds" | $SED "$delay_single_quote_subst"`'
+postuninstall_cmds='`$ECHO "$postuninstall_cmds" | $SED "$delay_single_quote_subst"`'
+finish_cmds='`$ECHO "$finish_cmds" | $SED "$delay_single_quote_subst"`'
+finish_eval='`$ECHO "$finish_eval" | $SED "$delay_single_quote_subst"`'
+hardcode_into_libs='`$ECHO "$hardcode_into_libs" | $SED "$delay_single_quote_subst"`'
+sys_lib_search_path_spec='`$ECHO "$sys_lib_search_path_spec" | $SED "$delay_single_quote_subst"`'
+configure_time_dlsearch_path='`$ECHO "$configure_time_dlsearch_path" | $SED "$delay_single_quote_subst"`'
+configure_time_lt_sys_library_path='`$ECHO "$configure_time_lt_sys_library_path" | $SED "$delay_single_quote_subst"`'
+hardcode_action='`$ECHO "$hardcode_action" | $SED "$delay_single_quote_subst"`'
+enable_dlopen='`$ECHO "$enable_dlopen" | $SED "$delay_single_quote_subst"`'
+enable_dlopen_self='`$ECHO "$enable_dlopen_self" | $SED "$delay_single_quote_subst"`'
+enable_dlopen_self_static='`$ECHO "$enable_dlopen_self_static" | $SED "$delay_single_quote_subst"`'
+old_striplib='`$ECHO "$old_striplib" | $SED "$delay_single_quote_subst"`'
+striplib='`$ECHO "$striplib" | $SED "$delay_single_quote_subst"`'
+compiler_lib_search_dirs='`$ECHO "$compiler_lib_search_dirs" | $SED "$delay_single_quote_subst"`'
+predep_objects='`$ECHO "$predep_objects" | $SED "$delay_single_quote_subst"`'
+postdep_objects='`$ECHO "$postdep_objects" | $SED "$delay_single_quote_subst"`'
+predeps='`$ECHO "$predeps" | $SED "$delay_single_quote_subst"`'
+postdeps='`$ECHO "$postdeps" | $SED "$delay_single_quote_subst"`'
+compiler_lib_search_path='`$ECHO "$compiler_lib_search_path" | $SED "$delay_single_quote_subst"`'
+LD_CXX='`$ECHO "$LD_CXX" | $SED "$delay_single_quote_subst"`'
+reload_flag_CXX='`$ECHO "$reload_flag_CXX" | $SED "$delay_single_quote_subst"`'
+reload_cmds_CXX='`$ECHO "$reload_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+old_archive_cmds_CXX='`$ECHO "$old_archive_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+compiler_CXX='`$ECHO "$compiler_CXX" | $SED "$delay_single_quote_subst"`'
+GCC_CXX='`$ECHO "$GCC_CXX" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_no_builtin_flag_CXX='`$ECHO "$lt_prog_compiler_no_builtin_flag_CXX" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_pic_CXX='`$ECHO "$lt_prog_compiler_pic_CXX" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_wl_CXX='`$ECHO "$lt_prog_compiler_wl_CXX" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_static_CXX='`$ECHO "$lt_prog_compiler_static_CXX" | $SED "$delay_single_quote_subst"`'
+lt_cv_prog_compiler_c_o_CXX='`$ECHO "$lt_cv_prog_compiler_c_o_CXX" | $SED "$delay_single_quote_subst"`'
+archive_cmds_need_lc_CXX='`$ECHO "$archive_cmds_need_lc_CXX" | $SED "$delay_single_quote_subst"`'
+enable_shared_with_static_runtimes_CXX='`$ECHO "$enable_shared_with_static_runtimes_CXX" | $SED "$delay_single_quote_subst"`'
+export_dynamic_flag_spec_CXX='`$ECHO "$export_dynamic_flag_spec_CXX" | $SED "$delay_single_quote_subst"`'
+whole_archive_flag_spec_CXX='`$ECHO "$whole_archive_flag_spec_CXX" | $SED "$delay_single_quote_subst"`'
+compiler_needs_object_CXX='`$ECHO "$compiler_needs_object_CXX" | $SED "$delay_single_quote_subst"`'
+old_archive_from_new_cmds_CXX='`$ECHO "$old_archive_from_new_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+old_archive_from_expsyms_cmds_CXX='`$ECHO "$old_archive_from_expsyms_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+archive_cmds_CXX='`$ECHO "$archive_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+archive_expsym_cmds_CXX='`$ECHO "$archive_expsym_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+module_cmds_CXX='`$ECHO "$module_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+module_expsym_cmds_CXX='`$ECHO "$module_expsym_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+with_gnu_ld_CXX='`$ECHO "$with_gnu_ld_CXX" | $SED "$delay_single_quote_subst"`'
+allow_undefined_flag_CXX='`$ECHO "$allow_undefined_flag_CXX" | $SED "$delay_single_quote_subst"`'
+no_undefined_flag_CXX='`$ECHO "$no_undefined_flag_CXX" | $SED "$delay_single_quote_subst"`'
+hardcode_libdir_flag_spec_CXX='`$ECHO "$hardcode_libdir_flag_spec_CXX" | $SED "$delay_single_quote_subst"`'
+hardcode_libdir_separator_CXX='`$ECHO "$hardcode_libdir_separator_CXX" | $SED "$delay_single_quote_subst"`'
+hardcode_direct_CXX='`$ECHO "$hardcode_direct_CXX" | $SED "$delay_single_quote_subst"`'
+hardcode_direct_absolute_CXX='`$ECHO "$hardcode_direct_absolute_CXX" | $SED "$delay_single_quote_subst"`'
+hardcode_minus_L_CXX='`$ECHO "$hardcode_minus_L_CXX" | $SED "$delay_single_quote_subst"`'
+hardcode_shlibpath_var_CXX='`$ECHO "$hardcode_shlibpath_var_CXX" | $SED "$delay_single_quote_subst"`'
+hardcode_automatic_CXX='`$ECHO "$hardcode_automatic_CXX" | $SED "$delay_single_quote_subst"`'
+inherit_rpath_CXX='`$ECHO "$inherit_rpath_CXX" | $SED "$delay_single_quote_subst"`'
+link_all_deplibs_CXX='`$ECHO "$link_all_deplibs_CXX" | $SED "$delay_single_quote_subst"`'
+always_export_symbols_CXX='`$ECHO "$always_export_symbols_CXX" | $SED "$delay_single_quote_subst"`'
+export_symbols_cmds_CXX='`$ECHO "$export_symbols_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+exclude_expsyms_CXX='`$ECHO "$exclude_expsyms_CXX" | $SED "$delay_single_quote_subst"`'
+include_expsyms_CXX='`$ECHO "$include_expsyms_CXX" | $SED "$delay_single_quote_subst"`'
+prelink_cmds_CXX='`$ECHO "$prelink_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+postlink_cmds_CXX='`$ECHO "$postlink_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+file_list_spec_CXX='`$ECHO "$file_list_spec_CXX" | $SED "$delay_single_quote_subst"`'
+hardcode_action_CXX='`$ECHO "$hardcode_action_CXX" | $SED "$delay_single_quote_subst"`'
+compiler_lib_search_dirs_CXX='`$ECHO "$compiler_lib_search_dirs_CXX" | $SED "$delay_single_quote_subst"`'
+predep_objects_CXX='`$ECHO "$predep_objects_CXX" | $SED "$delay_single_quote_subst"`'
+postdep_objects_CXX='`$ECHO "$postdep_objects_CXX" | $SED "$delay_single_quote_subst"`'
+predeps_CXX='`$ECHO "$predeps_CXX" | $SED "$delay_single_quote_subst"`'
+postdeps_CXX='`$ECHO "$postdeps_CXX" | $SED "$delay_single_quote_subst"`'
+compiler_lib_search_path_CXX='`$ECHO "$compiler_lib_search_path_CXX" | $SED "$delay_single_quote_subst"`'
+
+LTCC='$LTCC'
+LTCFLAGS='$LTCFLAGS'
+compiler='$compiler_DEFAULT'
+
+# A function that is used when there is no print builtin or printf.
+func_fallback_echo ()
+{
+ eval 'cat <<_LTECHO_EOF
+\$1
+_LTECHO_EOF'
+}
+
+# Quote evaled strings.
+for var in SHELL \
+ECHO \
+PATH_SEPARATOR \
+SED \
+GREP \
+EGREP \
+FGREP \
+LD \
+NM \
+LN_S \
+lt_SP2NL \
+lt_NL2SP \
+reload_flag \
+OBJDUMP \
+deplibs_check_method \
+file_magic_cmd \
+file_magic_glob \
+want_nocaseglob \
+DLLTOOL \
+sharedlib_from_linklib_cmd \
+AR \
+AR_FLAGS \
+archiver_list_spec \
+STRIP \
+RANLIB \
+CC \
+CFLAGS \
+compiler \
+lt_cv_sys_global_symbol_pipe \
+lt_cv_sys_global_symbol_to_cdecl \
+lt_cv_sys_global_symbol_to_import \
+lt_cv_sys_global_symbol_to_c_name_address \
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \
+lt_cv_nm_interface \
+nm_file_list_spec \
+lt_cv_truncate_bin \
+lt_prog_compiler_no_builtin_flag \
+lt_prog_compiler_pic \
+lt_prog_compiler_wl \
+lt_prog_compiler_static \
+lt_cv_prog_compiler_c_o \
+need_locks \
+MANIFEST_TOOL \
+DSYMUTIL \
+NMEDIT \
+LIPO \
+OTOOL \
+OTOOL64 \
+shrext_cmds \
+export_dynamic_flag_spec \
+whole_archive_flag_spec \
+compiler_needs_object \
+with_gnu_ld \
+allow_undefined_flag \
+no_undefined_flag \
+hardcode_libdir_flag_spec \
+hardcode_libdir_separator \
+exclude_expsyms \
+include_expsyms \
+file_list_spec \
+variables_saved_for_relink \
+libname_spec \
+library_names_spec \
+soname_spec \
+install_override_mode \
+finish_eval \
+old_striplib \
+striplib \
+compiler_lib_search_dirs \
+predep_objects \
+postdep_objects \
+predeps \
+postdeps \
+compiler_lib_search_path \
+LD_CXX \
+reload_flag_CXX \
+compiler_CXX \
+lt_prog_compiler_no_builtin_flag_CXX \
+lt_prog_compiler_pic_CXX \
+lt_prog_compiler_wl_CXX \
+lt_prog_compiler_static_CXX \
+lt_cv_prog_compiler_c_o_CXX \
+export_dynamic_flag_spec_CXX \
+whole_archive_flag_spec_CXX \
+compiler_needs_object_CXX \
+with_gnu_ld_CXX \
+allow_undefined_flag_CXX \
+no_undefined_flag_CXX \
+hardcode_libdir_flag_spec_CXX \
+hardcode_libdir_separator_CXX \
+exclude_expsyms_CXX \
+include_expsyms_CXX \
+file_list_spec_CXX \
+compiler_lib_search_dirs_CXX \
+predep_objects_CXX \
+postdep_objects_CXX \
+predeps_CXX \
+postdeps_CXX \
+compiler_lib_search_path_CXX; do
+ case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
+ *[\\\\\\\`\\"\\\$]*)
+ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes
+ ;;
+ *)
+ eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+ ;;
+ esac
+done
+
+# Double-quote double-evaled strings.
+for var in reload_cmds \
+old_postinstall_cmds \
+old_postuninstall_cmds \
+old_archive_cmds \
+extract_expsyms_cmds \
+old_archive_from_new_cmds \
+old_archive_from_expsyms_cmds \
+archive_cmds \
+archive_expsym_cmds \
+module_cmds \
+module_expsym_cmds \
+export_symbols_cmds \
+prelink_cmds \
+postlink_cmds \
+postinstall_cmds \
+postuninstall_cmds \
+finish_cmds \
+sys_lib_search_path_spec \
+configure_time_dlsearch_path \
+configure_time_lt_sys_library_path \
+reload_cmds_CXX \
+old_archive_cmds_CXX \
+old_archive_from_new_cmds_CXX \
+old_archive_from_expsyms_cmds_CXX \
+archive_cmds_CXX \
+archive_expsym_cmds_CXX \
+module_cmds_CXX \
+module_expsym_cmds_CXX \
+export_symbols_cmds_CXX \
+prelink_cmds_CXX \
+postlink_cmds_CXX; do
+ case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
+ *[\\\\\\\`\\"\\\$]*)
+ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes
+ ;;
+ *)
+ eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+ ;;
+ esac
+done
+
+ac_aux_dir='$ac_aux_dir'
+
+# See if we are running on zsh, and set the options that allow our
+# commands through without removal of \ escapes INIT.
+if test -n "\${ZSH_VERSION+set}"; then
+ setopt NO_GLOB_SUBST
+fi
+
+
+ PACKAGE='$PACKAGE'
+ VERSION='$VERSION'
+ RM='$RM'
+ ofile='$ofile'
+
+
+
+
+
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+
+# Handling of arguments.
+for ac_config_target in $ac_config_targets
+do
+ case $ac_config_target in
+ "amconfig.h") CONFIG_HEADERS="$CONFIG_HEADERS amconfig.h:amconfig.in" ;;
+ "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
+ "libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;;
+ "bin/Makefile") CONFIG_FILES="$CONFIG_FILES bin/Makefile" ;;
+ "bin/nnlo-config") CONFIG_FILES="$CONFIG_FILES bin/nnlo-config" ;;
+ "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
+ "src/Makefile") CONFIG_FILES="$CONFIG_FILES src/Makefile" ;;
+
+ *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
+ esac
+done
+
+
+# If the user did not use the arguments to specify the items to instantiate,
+# then the envvar interface is used. Set only those that are not.
+# We use the long form for the default assignment because of an extremely
+# bizarre bug on SunOS 4.1.3.
+if $ac_need_defaults; then
+ test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
+ test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers
+ test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
+fi
+
+# Have a temporary directory for convenience. Make it in the build tree
+# simply because there is no reason against having it here, and in addition,
+# creating and moving files from /tmp can sometimes cause problems.
+# Hook for its removal unless debugging.
+# Note that there is a small window in which the directory will not be cleaned:
+# after its creation but before its name has been assigned to `$tmp'.
+$debug ||
+{
+ tmp= ac_tmp=
+ trap 'exit_status=$?
+ : "${ac_tmp:=$tmp}"
+ { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status
+' 0
+ trap 'as_fn_exit 1' 1 2 13 15
+}
+# Create a (secure) tmp directory for tmp files.
+
+{
+ tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
+ test -d "$tmp"
+} ||
+{
+ tmp=./conf$$-$RANDOM
+ (umask 077 && mkdir "$tmp")
+} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5
+ac_tmp=$tmp
+
+# Set up the scripts for CONFIG_FILES section.
+# No need to generate them if there are no CONFIG_FILES.
+# This happens for instance with `./config.status config.h'.
+if test -n "$CONFIG_FILES"; then
+
+
+ac_cr=`echo X | tr X '\015'`
+# On cygwin, bash can eat \r inside `` if the user requested igncr.
+# But we know of no other shell where ac_cr would be empty at this
+# point, so we can use a bashism as a fallback.
+if test "x$ac_cr" = x; then
+ eval ac_cr=\$\'\\r\'
+fi
+ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
+if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
+ ac_cs_awk_cr='\\r'
+else
+ ac_cs_awk_cr=$ac_cr
+fi
+
+echo 'BEGIN {' >"$ac_tmp/subs1.awk" &&
+_ACEOF
+
+
+{
+ echo "cat >conf$$subs.awk <<_ACEOF" &&
+ echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' &&
+ echo "_ACEOF"
+} >conf$$subs.sh ||
+ as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'`
+ac_delim='%!_!# '
+for ac_last_try in false false false false false :; do
+ . ./conf$$subs.sh ||
+ as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+
+ ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
+ if test $ac_delim_n = $ac_delim_num; then
+ break
+ elif $ac_last_try; then
+ as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+ else
+ ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
+ fi
+done
+rm -f conf$$subs.sh
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK &&
+_ACEOF
+sed -n '
+h
+s/^/S["/; s/!.*/"]=/
+p
+g
+s/^[^!]*!//
+:repl
+t repl
+s/'"$ac_delim"'$//
+t delim
+:nl
+h
+s/\(.\{148\}\)..*/\1/
+t more1
+s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/
+p
+n
+b repl
+:more1
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t nl
+:delim
+h
+s/\(.\{148\}\)..*/\1/
+t more2
+s/["\\]/\\&/g; s/^/"/; s/$/"/
+p
+b
+:more2
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t delim
+' <conf$$subs.awk | sed '
+/^[^""]/{
+ N
+ s/\n//
+}
+' >>$CONFIG_STATUS || ac_write_fail=1
+rm -f conf$$subs.awk
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+_ACAWK
+cat >>"\$ac_tmp/subs1.awk" <<_ACAWK &&
+ for (key in S) S_is_set[key] = 1
+ FS = ""
+
+}
+{
+ line = $ 0
+ nfields = split(line, field, "@")
+ substed = 0
+ len = length(field[1])
+ for (i = 2; i < nfields; i++) {
+ key = field[i]
+ keylen = length(key)
+ if (S_is_set[key]) {
+ value = S[key]
+ line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3)
+ len += length(value) + length(field[++i])
+ substed = 1
+ } else
+ len += 1 + keylen
+ }
+
+ print line
+}
+
+_ACAWK
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then
+ sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g"
+else
+ cat
+fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \
+ || as_fn_error $? "could not setup config files machinery" "$LINENO" 5
+_ACEOF
+
+# VPATH may cause trouble with some makes, so we remove sole $(srcdir),
+# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and
+# trailing colons and then remove the whole line if VPATH becomes empty
+# (actually we leave an empty line to preserve line numbers).
+if test "x$srcdir" = x.; then
+ ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{
+h
+s///
+s/^/:/
+s/[ ]*$/:/
+s/:\$(srcdir):/:/g
+s/:\${srcdir}:/:/g
+s/:@srcdir@:/:/g
+s/^:*//
+s/:*$//
+x
+s/\(=[ ]*\).*/\1/
+G
+s/\n//
+s/^[^=]*=[ ]*$//
+}'
+fi
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+fi # test -n "$CONFIG_FILES"
+
+# Set up the scripts for CONFIG_HEADERS section.
+# No need to generate them if there are no CONFIG_HEADERS.
+# This happens for instance with `./config.status Makefile'.
+if test -n "$CONFIG_HEADERS"; then
+cat >"$ac_tmp/defines.awk" <<\_ACAWK ||
+BEGIN {
+_ACEOF
+
+# Transform confdefs.h into an awk script `defines.awk', embedded as
+# here-document in config.status, that substitutes the proper values into
+# config.h.in to produce config.h.
+
+# Create a delimiter string that does not exist in confdefs.h, to ease
+# handling of long lines.
+ac_delim='%!_!# '
+for ac_last_try in false false :; do
+ ac_tt=`sed -n "/$ac_delim/p" confdefs.h`
+ if test -z "$ac_tt"; then
+ break
+ elif $ac_last_try; then
+ as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5
+ else
+ ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
+ fi
+done
+
+# For the awk script, D is an array of macro values keyed by name,
+# likewise P contains macro parameters if any. Preserve backslash
+# newline sequences.
+
+ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]*
+sed -n '
+s/.\{148\}/&'"$ac_delim"'/g
+t rset
+:rset
+s/^[ ]*#[ ]*define[ ][ ]*/ /
+t def
+d
+:def
+s/\\$//
+t bsnl
+s/["\\]/\\&/g
+s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\
+D["\1"]=" \3"/p
+s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2"/p
+d
+:bsnl
+s/["\\]/\\&/g
+s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\
+D["\1"]=" \3\\\\\\n"\\/p
+t cont
+s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p
+t cont
+d
+:cont
+n
+s/.\{148\}/&'"$ac_delim"'/g
+t clear
+:clear
+s/\\$//
+t bsnlc
+s/["\\]/\\&/g; s/^/"/; s/$/"/p
+d
+:bsnlc
+s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p
+b cont
+' <confdefs.h | sed '
+s/'"$ac_delim"'/"\\\
+"/g' >>$CONFIG_STATUS || ac_write_fail=1
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ for (key in D) D_is_set[key] = 1
+ FS = ""
+}
+/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ {
+ line = \$ 0
+ split(line, arg, " ")
+ if (arg[1] == "#") {
+ defundef = arg[2]
+ mac1 = arg[3]
+ } else {
+ defundef = substr(arg[1], 2)
+ mac1 = arg[2]
+ }
+ split(mac1, mac2, "(") #)
+ macro = mac2[1]
+ prefix = substr(line, 1, index(line, defundef) - 1)
+ if (D_is_set[macro]) {
+ # Preserve the white space surrounding the "#".
+ print prefix "define", macro P[macro] D[macro]
+ next
+ } else {
+ # Replace #undef with comments. This is necessary, for example,
+ # in the case of _POSIX_SOURCE, which is predefined and required
+ # on some systems where configure will not decide to define it.
+ if (defundef == "undef") {
+ print "/*", prefix defundef, macro, "*/"
+ next
+ }
+ }
+}
+{ print }
+_ACAWK
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+ as_fn_error $? "could not setup config headers machinery" "$LINENO" 5
+fi # test -n "$CONFIG_HEADERS"
+
+
+eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS"
+shift
+for ac_tag
+do
+ case $ac_tag in
+ :[FHLC]) ac_mode=$ac_tag; continue;;
+ esac
+ case $ac_mode$ac_tag in
+ :[FHL]*:*);;
+ :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;;
+ :[FH]-) ac_tag=-:-;;
+ :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
+ esac
+ ac_save_IFS=$IFS
+ IFS=:
+ set x $ac_tag
+ IFS=$ac_save_IFS
+ shift
+ ac_file=$1
+ shift
+
+ case $ac_mode in
+ :L) ac_source=$1;;
+ :[FH])
+ ac_file_inputs=
+ for ac_f
+ do
+ case $ac_f in
+ -) ac_f="$ac_tmp/stdin";;
+ *) # Look for the file first in the build tree, then in the source tree
+ # (if the path is not absolute). The absolute path cannot be DOS-style,
+ # because $ac_f cannot contain `:'.
+ test -f "$ac_f" ||
+ case $ac_f in
+ [\\/$]*) false;;
+ *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
+ esac ||
+ as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;;
+ esac
+ case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
+ as_fn_append ac_file_inputs " '$ac_f'"
+ done
+
+ # Let's still pretend it is `configure' which instantiates (i.e., don't
+ # use $as_me), people would be surprised to read:
+ # /* config.h. Generated by config.status. */
+ configure_input='Generated from '`
+ $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g'
+ `' by configure.'
+ if test x"$ac_file" != x-; then
+ configure_input="$ac_file. $configure_input"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5
+$as_echo "$as_me: creating $ac_file" >&6;}
+ fi
+ # Neutralize special characters interpreted by sed in replacement strings.
+ case $configure_input in #(
+ *\&* | *\|* | *\\* )
+ ac_sed_conf_input=`$as_echo "$configure_input" |
+ sed 's/[\\\\&|]/\\\\&/g'`;; #(
+ *) ac_sed_conf_input=$configure_input;;
+ esac
+
+ case $ac_tag in
+ *:-:* | *:-) cat >"$ac_tmp/stdin" \
+ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;;
+ esac
+ ;;
+ esac
+
+ ac_dir=`$as_dirname -- "$ac_file" ||
+$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$ac_file" : 'X\(//\)[^/]' \| \
+ X"$ac_file" : 'X\(//\)$' \| \
+ X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$ac_file" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ as_dir="$ac_dir"; as_fn_mkdir_p
+ ac_builddir=.
+
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+ ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
+ # A ".." for each directory in $ac_dir_suffix.
+ ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
+ case $ac_top_builddir_sub in
+ "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+ esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
+
+case $srcdir in
+ .) # We are building in place.
+ ac_srcdir=.
+ ac_top_srcdir=$ac_top_builddir_sub
+ ac_abs_top_srcdir=$ac_pwd ;;
+ [\\/]* | ?:[\\/]* ) # Absolute name.
+ ac_srcdir=$srcdir$ac_dir_suffix;
+ ac_top_srcdir=$srcdir
+ ac_abs_top_srcdir=$srcdir ;;
+ *) # Relative name.
+ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+ ac_top_srcdir=$ac_top_build_prefix$srcdir
+ ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+
+ case $ac_mode in
+ :F)
+ #
+ # CONFIG_FILE
+ #
+
+ case $INSTALL in
+ [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
+ *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
+ esac
+ ac_MKDIR_P=$MKDIR_P
+ case $MKDIR_P in
+ [\\/$]* | ?:[\\/]* ) ;;
+ */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;;
+ esac
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# If the template does not know about datarootdir, expand it.
+# FIXME: This hack should be removed a few years after 2.60.
+ac_datarootdir_hack=; ac_datarootdir_seen=
+ac_sed_dataroot='
+/datarootdir/ {
+ p
+ q
+}
+/@datadir@/p
+/@docdir@/p
+/@infodir@/p
+/@localedir@/p
+/@mandir@/p'
+case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
+*datarootdir*) ac_datarootdir_seen=yes;;
+*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
+$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ ac_datarootdir_hack='
+ s&@datadir@&$datadir&g
+ s&@docdir@&$docdir&g
+ s&@infodir@&$infodir&g
+ s&@localedir@&$localedir&g
+ s&@mandir@&$mandir&g
+ s&\\\${datarootdir}&$datarootdir&g' ;;
+esac
+_ACEOF
+
+# Neutralize VPATH when `$srcdir' = `.'.
+# Shell code in configure.ac might set extrasub.
+# FIXME: do we really want to maintain this feature?
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ac_sed_extra="$ac_vpsub
+$extrasub
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+:t
+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
+s|@configure_input@|$ac_sed_conf_input|;t t
+s&@top_builddir@&$ac_top_builddir_sub&;t t
+s&@top_build_prefix@&$ac_top_build_prefix&;t t
+s&@srcdir@&$ac_srcdir&;t t
+s&@abs_srcdir@&$ac_abs_srcdir&;t t
+s&@top_srcdir@&$ac_top_srcdir&;t t
+s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
+s&@builddir@&$ac_builddir&;t t
+s&@abs_builddir@&$ac_abs_builddir&;t t
+s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
+s&@INSTALL@&$ac_INSTALL&;t t
+s&@MKDIR_P@&$ac_MKDIR_P&;t t
+$ac_datarootdir_hack
+"
+eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \
+ >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+
+test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
+ { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } &&
+ { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \
+ "$ac_tmp/out"`; test -z "$ac_out"; } &&
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined. Please make sure it is defined" >&5
+$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined. Please make sure it is defined" >&2;}
+
+ rm -f "$ac_tmp/stdin"
+ case $ac_file in
+ -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";;
+ *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";;
+ esac \
+ || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+ ;;
+ :H)
+ #
+ # CONFIG_HEADER
+ #
+ if test x"$ac_file" != x-; then
+ {
+ $as_echo "/* $configure_input */" \
+ && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs"
+ } >"$ac_tmp/config.h" \
+ || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+ if diff "$ac_file" "$ac_tmp/config.h" >/dev/null 2>&1; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5
+$as_echo "$as_me: $ac_file is unchanged" >&6;}
+ else
+ rm -f "$ac_file"
+ mv "$ac_tmp/config.h" "$ac_file" \
+ || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+ fi
+ else
+ $as_echo "/* $configure_input */" \
+ && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" \
+ || as_fn_error $? "could not create -" "$LINENO" 5
+ fi
+# Compute "$ac_file"'s index in $config_headers.
+_am_arg="$ac_file"
+_am_stamp_count=1
+for _am_header in $config_headers :; do
+ case $_am_header in
+ $_am_arg | $_am_arg:* )
+ break ;;
+ * )
+ _am_stamp_count=`expr $_am_stamp_count + 1` ;;
+ esac
+done
+echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" ||
+$as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$_am_arg" : 'X\(//\)[^/]' \| \
+ X"$_am_arg" : 'X\(//\)$' \| \
+ X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$_am_arg" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`/stamp-h$_am_stamp_count
+ ;;
+
+ :C) { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5
+$as_echo "$as_me: executing $ac_file commands" >&6;}
+ ;;
+ esac
+
+
+ case $ac_file$ac_mode in
+ "depfiles":C) test x"$AMDEP_TRUE" != x"" || {
+ # Older Autoconf quotes --file arguments for eval, but not when files
+ # are listed without --file. Let's play safe and only enable the eval
+ # if we detect the quoting.
+ case $CONFIG_FILES in
+ *\'*) eval set x "$CONFIG_FILES" ;;
+ *) set x $CONFIG_FILES ;;
+ esac
+ shift
+ for mf
+ do
+ # Strip MF so we end up with the name of the file.
+ mf=`echo "$mf" | sed -e 's/:.*$//'`
+ # Check whether this is an Automake generated Makefile or not.
+ # We used to match only the files named 'Makefile.in', but
+ # some people rename them; so instead we look at the file content.
+ # Grep'ing the first line is not enough: some people post-process
+ # each Makefile.in and add a new line on top of each file to say so.
+ # Grep'ing the whole file is not good either: AIX grep has a line
+ # limit of 2048, but all sed's we know have understand at least 4000.
+ if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
+ dirpart=`$as_dirname -- "$mf" ||
+$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$mf" : 'X\(//\)[^/]' \| \
+ X"$mf" : 'X\(//\)$' \| \
+ X"$mf" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$mf" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ else
+ continue
+ fi
+ # Extract the definition of DEPDIR, am__include, and am__quote
+ # from the Makefile without running 'make'.
+ DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
+ test -z "$DEPDIR" && continue
+ am__include=`sed -n 's/^am__include = //p' < "$mf"`
+ test -z "$am__include" && continue
+ am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
+ # Find all dependency output files, they are included files with
+ # $(DEPDIR) in their names. We invoke sed twice because it is the
+ # simplest approach to changing $(DEPDIR) to its actual value in the
+ # expansion.
+ for file in `sed -n "
+ s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
+ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do
+ # Make sure the directory exists.
+ test -f "$dirpart/$file" && continue
+ fdir=`$as_dirname -- "$file" ||
+$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$file" : 'X\(//\)[^/]' \| \
+ X"$file" : 'X\(//\)$' \| \
+ X"$file" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$file" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ as_dir=$dirpart/$fdir; as_fn_mkdir_p
+ # echo "creating $dirpart/$file"
+ echo '# dummy' > "$dirpart/$file"
+ done
+ done
+}
+ ;;
+ "libtool":C)
+
+ # See if we are running on zsh, and set the options that allow our
+ # commands through without removal of \ escapes.
+ if test -n "${ZSH_VERSION+set}"; then
+ setopt NO_GLOB_SUBST
+ fi
+
+ cfgfile=${ofile}T
+ trap "$RM \"$cfgfile\"; exit 1" 1 2 15
+ $RM "$cfgfile"
+
+ cat <<_LT_EOF >> "$cfgfile"
+#! $SHELL
+# Generated automatically by $as_me ($PACKAGE) $VERSION
+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+# NOTE: Changes made to this file will be lost: look at ltmain.sh.
+
+# Provide generalized library-building support services.
+# Written by Gordon Matzigkeit, 1996
+
+# Copyright (C) 2014 Free Software Foundation, Inc.
+# This is free software; see the source for copying conditions. There is NO
+# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+
+# GNU Libtool is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of of the License, or
+# (at your option) any later version.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program or library that is built
+# using GNU Libtool, you may include this file under the same
+# distribution terms that you use for the rest of that program.
+#
+# GNU Libtool is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+
+# The names of the tagged configurations supported by this script.
+available_tags='CXX '
+
+# Configured defaults for sys_lib_dlsearch_path munging.
+: \${LT_SYS_LIBRARY_PATH="$configure_time_lt_sys_library_path"}
+
+# ### BEGIN LIBTOOL CONFIG
+
+# Which release of libtool.m4 was used?
+macro_version=$macro_version
+macro_revision=$macro_revision
+
+# Whether or not to build shared libraries.
+build_libtool_libs=$enable_shared
+
+# Whether or not to build static libraries.
+build_old_libs=$enable_static
+
+# What type of objects to build.
+pic_mode=$pic_mode
+
+# Whether or not to optimize for fast installation.
+fast_install=$enable_fast_install
+
+# Shared archive member basename,for filename based shared library versioning on AIX.
+shared_archive_member_spec=$shared_archive_member_spec
+
+# Shell to use when invoking shell scripts.
+SHELL=$lt_SHELL
+
+# An echo program that protects backslashes.
+ECHO=$lt_ECHO
+
+# The PATH separator for the build system.
+PATH_SEPARATOR=$lt_PATH_SEPARATOR
+
+# The host system.
+host_alias=$host_alias
+host=$host
+host_os=$host_os
+
+# The build system.
+build_alias=$build_alias
+build=$build
+build_os=$build_os
+
+# A sed program that does not truncate output.
+SED=$lt_SED
+
+# Sed that helps us avoid accidentally triggering echo(1) options like -n.
+Xsed="\$SED -e 1s/^X//"
+
+# A grep program that handles long lines.
+GREP=$lt_GREP
+
+# An ERE matcher.
+EGREP=$lt_EGREP
+
+# A literal string matcher.
+FGREP=$lt_FGREP
+
+# A BSD- or MS-compatible name lister.
+NM=$lt_NM
+
+# Whether we need soft or hard links.
+LN_S=$lt_LN_S
+
+# What is the maximum length of a command?
+max_cmd_len=$max_cmd_len
+
+# Object file suffix (normally "o").
+objext=$ac_objext
+
+# Executable file suffix (normally "").
+exeext=$exeext
+
+# whether the shell understands "unset".
+lt_unset=$lt_unset
+
+# turn spaces into newlines.
+SP2NL=$lt_lt_SP2NL
+
+# turn newlines into spaces.
+NL2SP=$lt_lt_NL2SP
+
+# convert \$build file names to \$host format.
+to_host_file_cmd=$lt_cv_to_host_file_cmd
+
+# convert \$build files to toolchain format.
+to_tool_file_cmd=$lt_cv_to_tool_file_cmd
+
+# An object symbol dumper.
+OBJDUMP=$lt_OBJDUMP
+
+# Method to check whether dependent libraries are shared objects.
+deplibs_check_method=$lt_deplibs_check_method
+
+# Command to use when deplibs_check_method = "file_magic".
+file_magic_cmd=$lt_file_magic_cmd
+
+# How to find potential files when deplibs_check_method = "file_magic".
+file_magic_glob=$lt_file_magic_glob
+
+# Find potential files using nocaseglob when deplibs_check_method = "file_magic".
+want_nocaseglob=$lt_want_nocaseglob
+
+# DLL creation program.
+DLLTOOL=$lt_DLLTOOL
+
+# Command to associate shared and link libraries.
+sharedlib_from_linklib_cmd=$lt_sharedlib_from_linklib_cmd
+
+# The archiver.
+AR=$lt_AR
+
+# Flags to create an archive.
+AR_FLAGS=$lt_AR_FLAGS
+
+# How to feed a file listing to the archiver.
+archiver_list_spec=$lt_archiver_list_spec
+
+# A symbol stripping program.
+STRIP=$lt_STRIP
+
+# Commands used to install an old-style archive.
+RANLIB=$lt_RANLIB
+old_postinstall_cmds=$lt_old_postinstall_cmds
+old_postuninstall_cmds=$lt_old_postuninstall_cmds
+
+# Whether to use a lock for old archive extraction.
+lock_old_archive_extraction=$lock_old_archive_extraction
+
+# A C compiler.
+LTCC=$lt_CC
+
+# LTCC compiler flags.
+LTCFLAGS=$lt_CFLAGS
+
+# Take the output of nm and produce a listing of raw symbols and C names.
+global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
+
+# Transform the output of nm in a proper C declaration.
+global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
+
+# Transform the output of nm into a list of symbols to manually relocate.
+global_symbol_to_import=$lt_lt_cv_sys_global_symbol_to_import
+
+# Transform the output of nm in a C name address pair.
+global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
+
+# Transform the output of nm in a C name address pair when lib prefix is needed.
+global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix
+
+# The name lister interface.
+nm_interface=$lt_lt_cv_nm_interface
+
+# Specify filename containing input files for \$NM.
+nm_file_list_spec=$lt_nm_file_list_spec
+
+# The root where to search for dependent libraries,and where our libraries should be installed.
+lt_sysroot=$lt_sysroot
+
+# Command to truncate a binary pipe.
+lt_truncate_bin=$lt_lt_cv_truncate_bin
+
+# The name of the directory that contains temporary libtool files.
+objdir=$objdir
+
+# Used to examine libraries when file_magic_cmd begins with "file".
+MAGIC_CMD=$MAGIC_CMD
+
+# Must we lock files when doing compilation?
+need_locks=$lt_need_locks
+
+# Manifest tool.
+MANIFEST_TOOL=$lt_MANIFEST_TOOL
+
+# Tool to manipulate archived DWARF debug symbol files on Mac OS X.
+DSYMUTIL=$lt_DSYMUTIL
+
+# Tool to change global to local symbols on Mac OS X.
+NMEDIT=$lt_NMEDIT
+
+# Tool to manipulate fat objects and archives on Mac OS X.
+LIPO=$lt_LIPO
+
+# ldd/readelf like tool for Mach-O binaries on Mac OS X.
+OTOOL=$lt_OTOOL
+
+# ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4.
+OTOOL64=$lt_OTOOL64
+
+# Old archive suffix (normally "a").
+libext=$libext
+
+# Shared library suffix (normally ".so").
+shrext_cmds=$lt_shrext_cmds
+
+# The commands to extract the exported symbol list from a shared archive.
+extract_expsyms_cmds=$lt_extract_expsyms_cmds
+
+# Variables whose values should be saved in libtool wrapper scripts and
+# restored at link time.
+variables_saved_for_relink=$lt_variables_saved_for_relink
+
+# Do we need the "lib" prefix for modules?
+need_lib_prefix=$need_lib_prefix
+
+# Do we need a version for libraries?
+need_version=$need_version
+
+# Library versioning type.
+version_type=$version_type
+
+# Shared library runtime path variable.
+runpath_var=$runpath_var
+
+# Shared library path variable.
+shlibpath_var=$shlibpath_var
+
+# Is shlibpath searched before the hard-coded library search path?
+shlibpath_overrides_runpath=$shlibpath_overrides_runpath
+
+# Format of library name prefix.
+libname_spec=$lt_libname_spec
+
+# List of archive names. First name is the real one, the rest are links.
+# The last name is the one that the linker finds with -lNAME
+library_names_spec=$lt_library_names_spec
+
+# The coded name of the library, if different from the real name.
+soname_spec=$lt_soname_spec
+
+# Permission mode override for installation of shared libraries.
+install_override_mode=$lt_install_override_mode
+
+# Command to use after installation of a shared archive.
+postinstall_cmds=$lt_postinstall_cmds
+
+# Command to use after uninstallation of a shared archive.
+postuninstall_cmds=$lt_postuninstall_cmds
+
+# Commands used to finish a libtool library installation in a directory.
+finish_cmds=$lt_finish_cmds
+
+# As "finish_cmds", except a single script fragment to be evaled but
+# not shown.
+finish_eval=$lt_finish_eval
+
+# Whether we should hardcode library paths into libraries.
+hardcode_into_libs=$hardcode_into_libs
+
+# Compile-time system search path for libraries.
+sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
+
+# Detected run-time system search path for libraries.
+sys_lib_dlsearch_path_spec=$lt_configure_time_dlsearch_path
+
+# Explicit LT_SYS_LIBRARY_PATH set during ./configure time.
+configure_time_lt_sys_library_path=$lt_configure_time_lt_sys_library_path
+
+# Whether dlopen is supported.
+dlopen_support=$enable_dlopen
+
+# Whether dlopen of programs is supported.
+dlopen_self=$enable_dlopen_self
+
+# Whether dlopen of statically linked programs is supported.
+dlopen_self_static=$enable_dlopen_self_static
+
+# Commands to strip libraries.
+old_striplib=$lt_old_striplib
+striplib=$lt_striplib
+
+
+# The linker used to build libraries.
+LD=$lt_LD
+
+# How to create reloadable object files.
+reload_flag=$lt_reload_flag
+reload_cmds=$lt_reload_cmds
+
+# Commands used to build an old-style archive.
+old_archive_cmds=$lt_old_archive_cmds
+
+# A language specific compiler.
+CC=$lt_compiler
+
+# Is the compiler the GNU compiler?
+with_gcc=$GCC
+
+# Compiler flag to turn off builtin functions.
+no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag
+
+# Additional compiler flags for building library objects.
+pic_flag=$lt_lt_prog_compiler_pic
+
+# How to pass a linker flag through the compiler.
+wl=$lt_lt_prog_compiler_wl
+
+# Compiler flag to prevent dynamic linking.
+link_static_flag=$lt_lt_prog_compiler_static
+
+# Does compiler simultaneously support -c and -o options?
+compiler_c_o=$lt_lt_cv_prog_compiler_c_o
+
+# Whether or not to add -lc for building shared libraries.
+build_libtool_need_lc=$archive_cmds_need_lc
+
+# Whether or not to disallow shared libs when runtime libs are static.
+allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes
+
+# Compiler flag to allow reflexive dlopens.
+export_dynamic_flag_spec=$lt_export_dynamic_flag_spec
+
+# Compiler flag to generate shared objects directly from archives.
+whole_archive_flag_spec=$lt_whole_archive_flag_spec
+
+# Whether the compiler copes with passing no objects directly.
+compiler_needs_object=$lt_compiler_needs_object
+
+# Create an old-style archive from a shared archive.
+old_archive_from_new_cmds=$lt_old_archive_from_new_cmds
+
+# Create a temporary old-style archive to link instead of a shared archive.
+old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds
+
+# Commands used to build a shared archive.
+archive_cmds=$lt_archive_cmds
+archive_expsym_cmds=$lt_archive_expsym_cmds
+
+# Commands used to build a loadable module if different from building
+# a shared archive.
+module_cmds=$lt_module_cmds
+module_expsym_cmds=$lt_module_expsym_cmds
+
+# Whether we are building with GNU ld or not.
+with_gnu_ld=$lt_with_gnu_ld
+
+# Flag that allows shared libraries with undefined symbols to be built.
+allow_undefined_flag=$lt_allow_undefined_flag
+
+# Flag that enforces no undefined symbols.
+no_undefined_flag=$lt_no_undefined_flag
+
+# Flag to hardcode \$libdir into a binary during linking.
+# This must work even if \$libdir does not exist
+hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec
+
+# Whether we need a single "-rpath" flag with a separated argument.
+hardcode_libdir_separator=$lt_hardcode_libdir_separator
+
+# Set to "yes" if using DIR/libNAME\$shared_ext during linking hardcodes
+# DIR into the resulting binary.
+hardcode_direct=$hardcode_direct
+
+# Set to "yes" if using DIR/libNAME\$shared_ext during linking hardcodes
+# DIR into the resulting binary and the resulting library dependency is
+# "absolute",i.e impossible to change by setting \$shlibpath_var if the
+# library is relocated.
+hardcode_direct_absolute=$hardcode_direct_absolute
+
+# Set to "yes" if using the -LDIR flag during linking hardcodes DIR
+# into the resulting binary.
+hardcode_minus_L=$hardcode_minus_L
+
+# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
+# into the resulting binary.
+hardcode_shlibpath_var=$hardcode_shlibpath_var
+
+# Set to "yes" if building a shared library automatically hardcodes DIR
+# into the library and all subsequent libraries and executables linked
+# against it.
+hardcode_automatic=$hardcode_automatic
+
+# Set to yes if linker adds runtime paths of dependent libraries
+# to runtime path list.
+inherit_rpath=$inherit_rpath
+
+# Whether libtool must link a program against all its dependency libraries.
+link_all_deplibs=$link_all_deplibs
+
+# Set to "yes" if exported symbols are required.
+always_export_symbols=$always_export_symbols
+
+# The commands to list exported symbols.
+export_symbols_cmds=$lt_export_symbols_cmds
+
+# Symbols that should not be listed in the preloaded symbols.
+exclude_expsyms=$lt_exclude_expsyms
+
+# Symbols that must always be exported.
+include_expsyms=$lt_include_expsyms
+
+# Commands necessary for linking programs (against libraries) with templates.
+prelink_cmds=$lt_prelink_cmds
+
+# Commands necessary for finishing linking programs.
+postlink_cmds=$lt_postlink_cmds
+
+# Specify filename containing input files.
+file_list_spec=$lt_file_list_spec
+
+# How to hardcode a shared library path into an executable.
+hardcode_action=$hardcode_action
+
+# The directories searched by this compiler when creating a shared library.
+compiler_lib_search_dirs=$lt_compiler_lib_search_dirs
+
+# Dependencies to place before and after the objects being linked to
+# create a shared library.
+predep_objects=$lt_predep_objects
+postdep_objects=$lt_postdep_objects
+predeps=$lt_predeps
+postdeps=$lt_postdeps
+
+# The library search path used internally by the compiler when linking
+# a shared library.
+compiler_lib_search_path=$lt_compiler_lib_search_path
+
+# ### END LIBTOOL CONFIG
+
+_LT_EOF
+
+ cat <<'_LT_EOF' >> "$cfgfile"
+
+# ### BEGIN FUNCTIONS SHARED WITH CONFIGURE
+
+# func_munge_path_list VARIABLE PATH
+# -----------------------------------
+# VARIABLE is name of variable containing _space_ separated list of
+# directories to be munged by the contents of PATH, which is string
+# having a format:
+# "DIR[:DIR]:"
+# string "DIR[ DIR]" will be prepended to VARIABLE
+# ":DIR[:DIR]"
+# string "DIR[ DIR]" will be appended to VARIABLE
+# "DIRP[:DIRP]::[DIRA:]DIRA"
+# string "DIRP[ DIRP]" will be prepended to VARIABLE and string
+# "DIRA[ DIRA]" will be appended to VARIABLE
+# "DIR[:DIR]"
+# VARIABLE will be replaced by "DIR[ DIR]"
+func_munge_path_list ()
+{
+ case x$2 in
+ x)
+ ;;
+ *:)
+ eval $1=\"`$ECHO $2 | $SED 's/:/ /g'` \$$1\"
+ ;;
+ x:*)
+ eval $1=\"\$$1 `$ECHO $2 | $SED 's/:/ /g'`\"
+ ;;
+ *::*)
+ eval $1=\"\$$1\ `$ECHO $2 | $SED -e 's/.*:://' -e 's/:/ /g'`\"
+ eval $1=\"`$ECHO $2 | $SED -e 's/::.*//' -e 's/:/ /g'`\ \$$1\"
+ ;;
+ *)
+ eval $1=\"`$ECHO $2 | $SED 's/:/ /g'`\"
+ ;;
+ esac
+}
+
+
+# Calculate cc_basename. Skip known compiler wrappers and cross-prefix.
+func_cc_basename ()
+{
+ for cc_temp in $*""; do
+ case $cc_temp in
+ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+ \-*) ;;
+ *) break;;
+ esac
+ done
+ func_cc_basename_result=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+}
+
+
+# ### END FUNCTIONS SHARED WITH CONFIGURE
+
+_LT_EOF
+
+ case $host_os in
+ aix3*)
+ cat <<\_LT_EOF >> "$cfgfile"
+# AIX sometimes has problems with the GCC collect2 program. For some
+# reason, if we set the COLLECT_NAMES environment variable, the problems
+# vanish in a puff of smoke.
+if test set != "${COLLECT_NAMES+set}"; then
+ COLLECT_NAMES=
+ export COLLECT_NAMES
+fi
+_LT_EOF
+ ;;
+ esac
+
+
+ltmain=$ac_aux_dir/ltmain.sh
+
+
+ # We use sed instead of cat because bash on DJGPP gets confused if
+ # if finds mixed CR/LF and LF-only lines. Since sed operates in
+ # text mode, it properly converts lines to CR/LF. This bash problem
+ # is reportedly fixed, but why not run on old versions too?
+ sed '$q' "$ltmain" >> "$cfgfile" \
+ || (rm -f "$cfgfile"; exit 1)
+
+ mv -f "$cfgfile" "$ofile" ||
+ (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
+ chmod +x "$ofile"
+
+
+ cat <<_LT_EOF >> "$ofile"
+
+# ### BEGIN LIBTOOL TAG CONFIG: CXX
+
+# The linker used to build libraries.
+LD=$lt_LD_CXX
+
+# How to create reloadable object files.
+reload_flag=$lt_reload_flag_CXX
+reload_cmds=$lt_reload_cmds_CXX
+
+# Commands used to build an old-style archive.
+old_archive_cmds=$lt_old_archive_cmds_CXX
+
+# A language specific compiler.
+CC=$lt_compiler_CXX
+
+# Is the compiler the GNU compiler?
+with_gcc=$GCC_CXX
+
+# Compiler flag to turn off builtin functions.
+no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_CXX
+
+# Additional compiler flags for building library objects.
+pic_flag=$lt_lt_prog_compiler_pic_CXX
+
+# How to pass a linker flag through the compiler.
+wl=$lt_lt_prog_compiler_wl_CXX
+
+# Compiler flag to prevent dynamic linking.
+link_static_flag=$lt_lt_prog_compiler_static_CXX
+
+# Does compiler simultaneously support -c and -o options?
+compiler_c_o=$lt_lt_cv_prog_compiler_c_o_CXX
+
+# Whether or not to add -lc for building shared libraries.
+build_libtool_need_lc=$archive_cmds_need_lc_CXX
+
+# Whether or not to disallow shared libs when runtime libs are static.
+allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_CXX
+
+# Compiler flag to allow reflexive dlopens.
+export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_CXX
+
+# Compiler flag to generate shared objects directly from archives.
+whole_archive_flag_spec=$lt_whole_archive_flag_spec_CXX
+
+# Whether the compiler copes with passing no objects directly.
+compiler_needs_object=$lt_compiler_needs_object_CXX
+
+# Create an old-style archive from a shared archive.
+old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_CXX
+
+# Create a temporary old-style archive to link instead of a shared archive.
+old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_CXX
+
+# Commands used to build a shared archive.
+archive_cmds=$lt_archive_cmds_CXX
+archive_expsym_cmds=$lt_archive_expsym_cmds_CXX
+
+# Commands used to build a loadable module if different from building
+# a shared archive.
+module_cmds=$lt_module_cmds_CXX
+module_expsym_cmds=$lt_module_expsym_cmds_CXX
+
+# Whether we are building with GNU ld or not.
+with_gnu_ld=$lt_with_gnu_ld_CXX
+
+# Flag that allows shared libraries with undefined symbols to be built.
+allow_undefined_flag=$lt_allow_undefined_flag_CXX
+
+# Flag that enforces no undefined symbols.
+no_undefined_flag=$lt_no_undefined_flag_CXX
+
+# Flag to hardcode \$libdir into a binary during linking.
+# This must work even if \$libdir does not exist
+hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_CXX
+
+# Whether we need a single "-rpath" flag with a separated argument.
+hardcode_libdir_separator=$lt_hardcode_libdir_separator_CXX
+
+# Set to "yes" if using DIR/libNAME\$shared_ext during linking hardcodes
+# DIR into the resulting binary.
+hardcode_direct=$hardcode_direct_CXX
+
+# Set to "yes" if using DIR/libNAME\$shared_ext during linking hardcodes
+# DIR into the resulting binary and the resulting library dependency is
+# "absolute",i.e impossible to change by setting \$shlibpath_var if the
+# library is relocated.
+hardcode_direct_absolute=$hardcode_direct_absolute_CXX
+
+# Set to "yes" if using the -LDIR flag during linking hardcodes DIR
+# into the resulting binary.
+hardcode_minus_L=$hardcode_minus_L_CXX
+
+# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
+# into the resulting binary.
+hardcode_shlibpath_var=$hardcode_shlibpath_var_CXX
+
+# Set to "yes" if building a shared library automatically hardcodes DIR
+# into the library and all subsequent libraries and executables linked
+# against it.
+hardcode_automatic=$hardcode_automatic_CXX
+
+# Set to yes if linker adds runtime paths of dependent libraries
+# to runtime path list.
+inherit_rpath=$inherit_rpath_CXX
+
+# Whether libtool must link a program against all its dependency libraries.
+link_all_deplibs=$link_all_deplibs_CXX
+
+# Set to "yes" if exported symbols are required.
+always_export_symbols=$always_export_symbols_CXX
+
+# The commands to list exported symbols.
+export_symbols_cmds=$lt_export_symbols_cmds_CXX
+
+# Symbols that should not be listed in the preloaded symbols.
+exclude_expsyms=$lt_exclude_expsyms_CXX
+
+# Symbols that must always be exported.
+include_expsyms=$lt_include_expsyms_CXX
+
+# Commands necessary for linking programs (against libraries) with templates.
+prelink_cmds=$lt_prelink_cmds_CXX
+
+# Commands necessary for finishing linking programs.
+postlink_cmds=$lt_postlink_cmds_CXX
+
+# Specify filename containing input files.
+file_list_spec=$lt_file_list_spec_CXX
+
+# How to hardcode a shared library path into an executable.
+hardcode_action=$hardcode_action_CXX
+
+# The directories searched by this compiler when creating a shared library.
+compiler_lib_search_dirs=$lt_compiler_lib_search_dirs_CXX
+
+# Dependencies to place before and after the objects being linked to
+# create a shared library.
+predep_objects=$lt_predep_objects_CXX
+postdep_objects=$lt_postdep_objects_CXX
+predeps=$lt_predeps_CXX
+postdeps=$lt_postdeps_CXX
+
+# The library search path used internally by the compiler when linking
+# a shared library.
+compiler_lib_search_path=$lt_compiler_lib_search_path_CXX
+
+# ### END LIBTOOL TAG CONFIG: CXX
+_LT_EOF
+
+ ;;
+
+ esac
+done # for ac_tag
+
+
+as_fn_exit 0
+_ACEOF
+ac_clean_files=$ac_clean_files_save
+
+test $ac_write_fail = 0 ||
+ as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5
+
+
+# configure is writing to config.log, and then calls config.status.
+# config.status does its own redirection, appending to config.log.
+# Unfortunately, on DOS this fails, as config.log is still kept open
+# by configure, so config.status won't be able to write to it; its
+# output is simply discarded. So we exec the FD to /dev/null,
+# effectively closing config.log, so it can be properly (re)opened and
+# appended to by config.status. When coming back to configure, we
+# need to make the FD available again.
+if test "$no_create" != yes; then
+ ac_cs_success=:
+ ac_config_status_args=
+ test "$silent" = yes &&
+ ac_config_status_args="$ac_config_status_args --quiet"
+ exec 5>/dev/null
+ $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
+ exec 5>>config.log
+ # Use ||, not &&, to avoid exiting from the if with $? = 1, which
+ # would make configure fail if this is the last instruction.
+ $ac_cs_success || as_fn_exit 1
+fi
+if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5
+$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;}
+fi
+
Property changes on: nnlo-bridge/tags/nnlo-bridge-00-00-44/configure
___________________________________________________________________
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: nnlo-bridge/tags/nnlo-bridge-00-00-44/Makefile.in
===================================================================
--- nnlo-bridge/tags/nnlo-bridge-00-00-44/Makefile.in (revision 0)
+++ nnlo-bridge/tags/nnlo-bridge-00-00-44/Makefile.in (revision 1772)
@@ -0,0 +1,890 @@
+# Makefile.in generated by automake 1.15 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2014 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+VPATH = @srcdir@
+am__is_gnu_make = { \
+ if test -z '$(MAKELEVEL)'; then \
+ false; \
+ elif test -n '$(MAKE_HOST)'; then \
+ true; \
+ elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+ true; \
+ else \
+ false; \
+ fi; \
+}
+am__make_running_with_option = \
+ case $${target_option-} in \
+ ?) ;; \
+ *) echo "am__make_running_with_option: internal error: invalid" \
+ "target option '$${target_option-}' specified" >&2; \
+ exit 1;; \
+ esac; \
+ has_opt=no; \
+ sane_makeflags=$$MAKEFLAGS; \
+ if $(am__is_gnu_make); then \
+ sane_makeflags=$$MFLAGS; \
+ else \
+ case $$MAKEFLAGS in \
+ *\\[\ \ ]*) \
+ bs=\\; \
+ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
+ esac; \
+ fi; \
+ skip_next=no; \
+ strip_trailopt () \
+ { \
+ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+ }; \
+ for flg in $$sane_makeflags; do \
+ test $$skip_next = yes && { skip_next=no; continue; }; \
+ case $$flg in \
+ *=*|--*) continue;; \
+ -*I) strip_trailopt 'I'; skip_next=yes;; \
+ -*I?*) strip_trailopt 'I';; \
+ -*O) strip_trailopt 'O'; skip_next=yes;; \
+ -*O?*) strip_trailopt 'O';; \
+ -*l) strip_trailopt 'l'; skip_next=yes;; \
+ -*l?*) strip_trailopt 'l';; \
+ -[dEDm]) skip_next=yes;; \
+ -[JT]) skip_next=yes;; \
+ esac; \
+ case $$flg in \
+ *$$target_option*) has_opt=yes; break;; \
+ esac; \
+ done; \
+ test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+subdir = .
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
+ $(am__configure_deps) $(dist_doc_DATA) $(am__DIST_COMMON)
+am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
+ configure.lineno config.status.lineno
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = amconfig.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo " GEN " $@;
+am__v_GEN_1 =
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 =
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
+ ctags-recursive dvi-recursive html-recursive info-recursive \
+ install-data-recursive install-dvi-recursive \
+ install-exec-recursive install-html-recursive \
+ install-info-recursive install-pdf-recursive \
+ install-ps-recursive install-recursive installcheck-recursive \
+ installdirs-recursive pdf-recursive ps-recursive \
+ tags-recursive uninstall-recursive
+am__can_run_installinfo = \
+ case $$AM_UPDATE_INFO_DIR in \
+ n|no|NO) false;; \
+ *) (install-info --version) >/dev/null 2>&1;; \
+ esac
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+ *) f=$$p;; \
+ esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+ for p in $$list; do echo "$$p $$p"; done | \
+ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+ if (++n[$$2] == $(am__install_max)) \
+ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+ END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+ test -z "$$files" \
+ || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+ || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+ $(am__cd) "$$dir" && rm -f $$files; }; \
+ }
+am__installdirs = "$(DESTDIR)$(docdir)"
+DATA = $(dist_doc_DATA)
+RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
+ distclean-recursive maintainer-clean-recursive
+am__recursive_targets = \
+ $(RECURSIVE_TARGETS) \
+ $(RECURSIVE_CLEAN_TARGETS) \
+ $(am__extra_recursive_targets)
+AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
+ cscope distdir dist dist-all distcheck
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \
+ $(LISP)amconfig.in
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates. Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+ BEGIN { nonempty = 0; } \
+ { items[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique. This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+ list='$(am__tagged_files)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | $(am__uniquify_input)`
+ETAGS = etags
+CTAGS = ctags
+CSCOPE = cscope
+DIST_SUBDIRS = $(SUBDIRS)
+am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/amconfig.in COPYING \
+ INSTALL README compile config.guess config.sub depcomp \
+ install-sh ltmain.sh missing
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+distdir = $(PACKAGE)-$(VERSION)
+top_distdir = $(distdir)
+am__remove_distdir = \
+ if test -d "$(distdir)"; then \
+ find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
+ && rm -rf "$(distdir)" \
+ || { sleep 5 && rm -rf "$(distdir)"; }; \
+ else :; fi
+am__post_remove_distdir = $(am__remove_distdir)
+am__relativize = \
+ dir0=`pwd`; \
+ sed_first='s,^\([^/]*\)/.*$$,\1,'; \
+ sed_rest='s,^[^/]*/*,,'; \
+ sed_last='s,^.*/\([^/]*\)$$,\1,'; \
+ sed_butlast='s,/*[^/]*$$,,'; \
+ while test -n "$$dir1"; do \
+ first=`echo "$$dir1" | sed -e "$$sed_first"`; \
+ if test "$$first" != "."; then \
+ if test "$$first" = ".."; then \
+ dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
+ dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
+ else \
+ first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
+ if test "$$first2" = "$$first"; then \
+ dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
+ else \
+ dir2="../$$dir2"; \
+ fi; \
+ dir0="$$dir0"/"$$first"; \
+ fi; \
+ fi; \
+ dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
+ done; \
+ reldir="$$dir2"
+DIST_ARCHIVES = $(distdir).tar.gz
+GZIP_ENV = --best
+DIST_TARGETS = dist-gzip
+distuninstallcheck_listfiles = find . -type f -print
+am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
+ | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
+distcleancheck_listfiles = find . -type f -print
+ACLOCAL = aclocal
+AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+APPLGRID_CXXFLAGS = @APPLGRID_CXXFLAGS@
+APPLGRID_LDFLAGS = @APPLGRID_LDFLAGS@
+APPLPATH = @APPLPATH@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = automake
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CERNROOT_LDFLAGS = @CERNROOT_LDFLAGS@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+CXXDEPMODE = @CXXDEPMODE@
+CXXFLAGS = @CXXFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+FASTNLOPATH = @FASTNLOPATH@
+FASTNLO_CXXFLAGS = @FASTNLO_CXXFLAGS@
+FASTNLO_LDFLAGS = @FASTNLO_LDFLAGS@
+FGREP = @FGREP@
+GREP = @GREP@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
+MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
+MKDIR_P = @MKDIR_P@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+RANLIB = @RANLIB@
+ROOTPATH = @ROOTPATH@
+ROOT_CFLAGS = @ROOT_CFLAGS@
+ROOT_LDFLAGS = @ROOT_LDFLAGS@
+ROOT_LIBS = @ROOT_LIBS@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+VERSION = @VERSION@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_CXX = @ac_ct_CXX@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = ${datadir}/doc/${PACKAGE}
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+AUTOMAKE_OPTIONS = foreign
+ACLOCAL_AMFLAGS = -I m4
+dist_doc_DATA = README INSTALL COPYING
+SUBDIRS = \
+ src bin
+
+all: amconfig.h
+ $(MAKE) $(AM_MAKEFLAGS) all-recursive
+
+.SUFFIXES:
+am--refresh: Makefile
+ @:
+$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
+ $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
+ && exit 0; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
+ $(am__cd) $(top_srcdir) && \
+ $(AUTOMAKE) --foreign Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ echo ' $(SHELL) ./config.status'; \
+ $(SHELL) ./config.status;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+ $(SHELL) ./config.status --recheck
+
+$(top_srcdir)/configure: $(am__configure_deps)
+ $(am__cd) $(srcdir) && $(AUTOCONF)
+$(ACLOCAL_M4): $(am__aclocal_m4_deps)
+ $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+$(am__aclocal_m4_deps):
+
+amconfig.h: stamp-h1
+ @test -f $@ || rm -f stamp-h1
+ @test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1
+
+stamp-h1: $(srcdir)/amconfig.in $(top_builddir)/config.status
+ @rm -f stamp-h1
+ cd $(top_builddir) && $(SHELL) ./config.status amconfig.h
+$(srcdir)/amconfig.in: $(am__configure_deps)
+ ($(am__cd) $(top_srcdir) && $(AUTOHEADER))
+ rm -f stamp-h1
+ touch $@
+
+distclean-hdr:
+ -rm -f amconfig.h stamp-h1
+
+mostlyclean-libtool:
+ -rm -f *.lo
+
+clean-libtool:
+ -rm -rf .libs _libs
+
+distclean-libtool:
+ -rm -f libtool config.lt
+install-dist_docDATA: $(dist_doc_DATA)
+ @$(NORMAL_INSTALL)
+ @list='$(dist_doc_DATA)'; test -n "$(docdir)" || list=; \
+ if test -n "$$list"; then \
+ echo " $(MKDIR_P) '$(DESTDIR)$(docdir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(docdir)" || exit 1; \
+ fi; \
+ for p in $$list; do \
+ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+ echo "$$d$$p"; \
+ done | $(am__base_list) | \
+ while read files; do \
+ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(docdir)'"; \
+ $(INSTALL_DATA) $$files "$(DESTDIR)$(docdir)" || exit $$?; \
+ done
+
+uninstall-dist_docDATA:
+ @$(NORMAL_UNINSTALL)
+ @list='$(dist_doc_DATA)'; test -n "$(docdir)" || list=; \
+ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+ dir='$(DESTDIR)$(docdir)'; $(am__uninstall_files_from_dir)
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run 'make' without going through this Makefile.
+# To change the values of 'make' variables: instead of editing Makefiles,
+# (1) if the variable is set in 'config.status', edit 'config.status'
+# (which will cause the Makefiles to be regenerated when you run 'make');
+# (2) otherwise, pass the desired values on the 'make' command line.
+$(am__recursive_targets):
+ @fail=; \
+ if $(am__make_keepgoing); then \
+ failcom='fail=yes'; \
+ else \
+ failcom='exit 1'; \
+ fi; \
+ dot_seen=no; \
+ target=`echo $@ | sed s/-recursive//`; \
+ case "$@" in \
+ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+ *) list='$(SUBDIRS)' ;; \
+ esac; \
+ for subdir in $$list; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ dot_seen=yes; \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done; \
+ if test "$$dot_seen" = "no"; then \
+ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+ fi; test -z "$$fail"
+
+ID: $(am__tagged_files)
+ $(am__define_uniq_tagged_files); mkid -fID $$unique
+tags: tags-recursive
+TAGS: tags
+
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+ set x; \
+ here=`pwd`; \
+ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+ include_option=--etags-include; \
+ empty_fix=.; \
+ else \
+ include_option=--include; \
+ empty_fix=; \
+ fi; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test ! -f $$subdir/TAGS || \
+ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
+ fi; \
+ done; \
+ $(am__define_uniq_tagged_files); \
+ shift; \
+ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ if test $$# -gt 0; then \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ "$$@" $$unique; \
+ else \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$unique; \
+ fi; \
+ fi
+ctags: ctags-recursive
+
+CTAGS: ctags
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+ $(am__define_uniq_tagged_files); \
+ test -z "$(CTAGS_ARGS)$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && $(am__cd) $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) "$$here"
+cscope: cscope.files
+ test ! -s cscope.files \
+ || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
+clean-cscope:
+ -rm -f cscope.files
+cscope.files: clean-cscope cscopelist
+cscopelist: cscopelist-recursive
+
+cscopelist-am: $(am__tagged_files)
+ list='$(am__tagged_files)'; \
+ case "$(srcdir)" in \
+ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+ *) sdir=$(subdir)/$(srcdir) ;; \
+ esac; \
+ for i in $$list; do \
+ if test -f "$$i"; then \
+ echo "$(subdir)/$$i"; \
+ else \
+ echo "$$sdir/$$i"; \
+ fi; \
+ done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+ -rm -f cscope.out cscope.in.out cscope.po.out cscope.files
+
+distdir: $(DISTFILES)
+ $(am__remove_distdir)
+ test -d "$(distdir)" || mkdir "$(distdir)"
+ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ list='$(DISTFILES)'; \
+ dist_files=`for file in $$list; do echo $$file; done | \
+ sed -e "s|^$$srcdirstrip/||;t" \
+ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+ case $$dist_files in \
+ */*) $(MKDIR_P) `echo "$$dist_files" | \
+ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+ sort -u` ;; \
+ esac; \
+ for file in $$dist_files; do \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ if test -d $$d/$$file; then \
+ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test -d "$(distdir)/$$file"; then \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+ else \
+ test -f "$(distdir)/$$file" \
+ || cp -p $$d/$$file "$(distdir)/$$file" \
+ || exit 1; \
+ fi; \
+ done
+ @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ $(am__make_dryrun) \
+ || test -d "$(distdir)/$$subdir" \
+ || $(MKDIR_P) "$(distdir)/$$subdir" \
+ || exit 1; \
+ dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
+ $(am__relativize); \
+ new_distdir=$$reldir; \
+ dir1=$$subdir; dir2="$(top_distdir)"; \
+ $(am__relativize); \
+ new_top_distdir=$$reldir; \
+ echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
+ echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
+ ($(am__cd) $$subdir && \
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="$$new_top_distdir" \
+ distdir="$$new_distdir" \
+ am__remove_distdir=: \
+ am__skip_length_check=: \
+ am__skip_mode_fix=: \
+ distdir) \
+ || exit 1; \
+ fi; \
+ done
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="$(top_distdir)" distdir="$(distdir)" \
+ dist-hook
+ -test -n "$(am__skip_mode_fix)" \
+ || find "$(distdir)" -type d ! -perm -755 \
+ -exec chmod u+rwx,go+rx {} \; -o \
+ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
+ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
+ ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
+ || chmod -R a+r "$(distdir)"
+dist-gzip: distdir
+ tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+ $(am__post_remove_distdir)
+
+dist-bzip2: distdir
+ tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
+ $(am__post_remove_distdir)
+
+dist-lzip: distdir
+ tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
+ $(am__post_remove_distdir)
+
+dist-xz: distdir
+ tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
+ $(am__post_remove_distdir)
+
+dist-tarZ: distdir
+ @echo WARNING: "Support for distribution archives compressed with" \
+ "legacy program 'compress' is deprecated." >&2
+ @echo WARNING: "It will be removed altogether in Automake 2.0" >&2
+ tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
+ $(am__post_remove_distdir)
+
+dist-shar: distdir
+ @echo WARNING: "Support for shar distribution archives is" \
+ "deprecated." >&2
+ @echo WARNING: "It will be removed altogether in Automake 2.0" >&2
+ shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
+ $(am__post_remove_distdir)
+
+dist-zip: distdir
+ -rm -f $(distdir).zip
+ zip -rq $(distdir).zip $(distdir)
+ $(am__post_remove_distdir)
+
+dist dist-all:
+ $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
+ $(am__post_remove_distdir)
+
+# This target untars the dist file and tries a VPATH configuration. Then
+# it guarantees that the distribution is self-contained by making another
+# tarfile.
+distcheck: dist
+ case '$(DIST_ARCHIVES)' in \
+ *.tar.gz*) \
+ GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
+ *.tar.bz2*) \
+ bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
+ *.tar.lz*) \
+ lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
+ *.tar.xz*) \
+ xz -dc $(distdir).tar.xz | $(am__untar) ;;\
+ *.tar.Z*) \
+ uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
+ *.shar.gz*) \
+ GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
+ *.zip*) \
+ unzip $(distdir).zip ;;\
+ esac
+ chmod -R a-w $(distdir)
+ chmod u+w $(distdir)
+ mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
+ chmod a-w $(distdir)
+ test -d $(distdir)/_build || exit 0; \
+ dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
+ && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
+ && am__cwd=`pwd` \
+ && $(am__cd) $(distdir)/_build/sub \
+ && ../../configure \
+ $(AM_DISTCHECK_CONFIGURE_FLAGS) \
+ $(DISTCHECK_CONFIGURE_FLAGS) \
+ --srcdir=../.. --prefix="$$dc_install_base" \
+ && $(MAKE) $(AM_MAKEFLAGS) \
+ && $(MAKE) $(AM_MAKEFLAGS) dvi \
+ && $(MAKE) $(AM_MAKEFLAGS) check \
+ && $(MAKE) $(AM_MAKEFLAGS) install \
+ && $(MAKE) $(AM_MAKEFLAGS) installcheck \
+ && $(MAKE) $(AM_MAKEFLAGS) uninstall \
+ && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
+ distuninstallcheck \
+ && chmod -R a-w "$$dc_install_base" \
+ && ({ \
+ (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
+ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
+ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
+ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
+ distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
+ } || { rm -rf "$$dc_destdir"; exit 1; }) \
+ && rm -rf "$$dc_destdir" \
+ && $(MAKE) $(AM_MAKEFLAGS) dist \
+ && rm -rf $(DIST_ARCHIVES) \
+ && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
+ && cd "$$am__cwd" \
+ || exit 1
+ $(am__post_remove_distdir)
+ @(echo "$(distdir) archives ready for distribution: "; \
+ list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
+ sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
+distuninstallcheck:
+ @test -n '$(distuninstallcheck_dir)' || { \
+ echo 'ERROR: trying to run $@ with an empty' \
+ '$$(distuninstallcheck_dir)' >&2; \
+ exit 1; \
+ }; \
+ $(am__cd) '$(distuninstallcheck_dir)' || { \
+ echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
+ exit 1; \
+ }; \
+ test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
+ || { echo "ERROR: files left after uninstall:" ; \
+ if test -n "$(DESTDIR)"; then \
+ echo " (check DESTDIR support)"; \
+ fi ; \
+ $(distuninstallcheck_listfiles) ; \
+ exit 1; } >&2
+distcleancheck: distclean
+ @if test '$(srcdir)' = . ; then \
+ echo "ERROR: distcleancheck can only run from a VPATH build" ; \
+ exit 1 ; \
+ fi
+ @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
+ || { echo "ERROR: files left in build directory after distclean:" ; \
+ $(distcleancheck_listfiles) ; \
+ exit 1; } >&2
+check-am: all-am
+check: check-recursive
+all-am: Makefile $(DATA) amconfig.h
+installdirs: installdirs-recursive
+installdirs-am:
+ for dir in "$(DESTDIR)$(docdir)"; do \
+ test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+ done
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+ if test -z '$(STRIP)'; then \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ install; \
+ else \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+ fi
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic clean-libtool clean-local mostlyclean-am
+
+distclean: distclean-recursive
+ -rm -f $(am__CONFIG_DISTCLEAN_FILES)
+ -rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-hdr \
+ distclean-libtool distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+html-am:
+
+info: info-recursive
+
+info-am:
+
+install-data-am: install-dist_docDATA
+
+install-dvi: install-dvi-recursive
+
+install-dvi-am:
+
+install-exec-am:
+
+install-html: install-html-recursive
+
+install-html-am:
+
+install-info: install-info-recursive
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-recursive
+
+install-pdf-am:
+
+install-ps: install-ps-recursive
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+ -rm -f $(am__CONFIG_DISTCLEAN_FILES)
+ -rm -rf $(top_srcdir)/autom4te.cache
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am: uninstall-dist_docDATA
+
+.MAKE: $(am__recursive_targets) all install-am install-strip
+
+.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
+ am--refresh check check-am clean clean-cscope clean-generic \
+ clean-libtool clean-local cscope cscopelist-am ctags ctags-am \
+ dist dist-all dist-bzip2 dist-gzip dist-hook dist-lzip \
+ dist-shar dist-tarZ dist-xz dist-zip distcheck distclean \
+ distclean-generic distclean-hdr distclean-libtool \
+ distclean-tags distcleancheck distdir distuninstallcheck dvi \
+ dvi-am html html-am info info-am install install-am \
+ install-data install-data-am install-dist_docDATA install-dvi \
+ install-dvi-am install-exec install-exec-am install-html \
+ install-html-am install-info install-info-am install-man \
+ install-pdf install-pdf-am install-ps install-ps-am \
+ install-strip installcheck installcheck-am installdirs \
+ installdirs-am maintainer-clean maintainer-clean-generic \
+ mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
+ ps ps-am tags tags-am uninstall uninstall-am \
+ uninstall-dist_docDATA
+
+.PRECIOUS: Makefile
+
+clean-local:
+ rm -rf autom4te.cache
+
+dist-hook:
+ rm -rf `find $(distdir) -name ".svn"` `find $(distdir) -name \*Dict\*`
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:

File Metadata

Mime Type
text/x-diff
Expires
Thu, Apr 24, 6:37 AM (1 d, 15 h)
Storage Engine
local-disk
Storage Format
Raw Data
Storage Handle
ef/fa/5cdd4b86200f0fad38a95bbf6e96
Default Alt Text
(2 MB)

Event Timeline