diff --git a/parameters/config.xml b/parameters/config.xml
index 3feb65d..c11de34 100644
--- a/parameters/config.xml
+++ b/parameters/config.xml
@@ -1,202 +1,201 @@
 <nuisance>
 <!-- # ###################################################### -->
 <!-- # NUISANCE CONFIGURATION OPTIONS -->
 <!-- # This file is read in by default at runtime -->
 <!-- # If you want to override on a case by case bases use -q at runtime -->
 <!-- # ###################################################### -->
 
 <!-- # MAIN Configs -->
 <!-- # ###################################################### -->
 
 <!-- # Logger goes from -->
 <!-- # 1 Quiet -->
 <!-- # 2 Fitter -->
 <!-- # 3 Samples -->
 <!-- # 4 Reconfigure Loops -->
 <!-- # 5 Every Event print out (SHOUT) -->
 <!-- # -1 DEBUGGING -->
-<config verbosity='5'/>
 <config VERBOSITY='5'/>
 
 <!-- # ERROR goes from -->
 <!-- # 0 NONE -->
 <!-- # 1 FATAL -->
 <!-- # 2 WARN -->
 <config ERROR='2'/>
 <config TRACE='0'/>
 
 <config cores='1' />
 <config spline_test_throws='50' />
 <config spline_cores='1' />
 <config spline_chunks='20' />
 <config spline_procchunk='-1' />
 
 <config Electron_NThetaBins='4' />
 <config Electron_NEnergyBins='4' />
 <config Electron_ThetaWidth='1.0' />
 <config Electron_EnergyWidth='0.10' />
 
 <config RemoveFSIParticles='0' />
 <config RemoveUndefParticles='0' />
 <config RemoveNuclearParticles='0'/>
 <config MINERvASaveExtraCCQE='0' />
 
 <!-- # Input Configs -->
 <!-- # ###################################################### -->
 
 <!-- # Default Requirements file for the externalDataFitter Package -->
 <!-- # MAX Events : -1 is no cut. Events will be scaled automatically to give good xsec predictions. -->
 <config MAXEVENTS='-1'/>
 <config includeemptystackhists='1'/>
 
 <!-- # Turn on/off event manager -->
 <!-- # EventManager enables us to only loop number of events once for multiple projections of the same measurements -->
 <!-- # e.g. MiniBooNE CC1pi+ Q2 and MiniBooNE CC1pi+ Tmu would ordinarily require 2 reconfigures, but with this enabled it requires only one -->
 <config EventManager='1'/>
 
 <!-- # Event Directories -->
 <!-- # Can setup default directories and use @EVENT_DIR/path to link to it -->
 <config EVENT_DIR='/data2/stowell/NIWG/'/>
 <config NEUT_EVENT_DIR='/data2/stowell/NIWG/neut/fit_samples_neut5.3.3/'/>
 <config GENIE_EVENT_DIR='/data2/stowell/NIWG/genie/fit_samples_R.2.10.0/'/>
 <config NUWRO_EVENT_DIR='/data2/stowell/NIWG/nuwro/fit_samples/'/>
 <config GIBUU_EVENT_DIR='/data/GIBUU/DIR/'/>
 <config SaveNuWroExtra='0' />
 
 <!-- # In PrepareGENIE the reconstructed splines can be saved into the file -->
 <config save_genie_splines='1'/>
 
 <!-- # In InputHandler the option to regenerate NuWro flux/xsec plots is available -->
 <!-- # Going to move this to its own app soon -->
 
 <!-- # DEVEL CONFIG OPTION, don't touch! -->
 <config CacheSize='0'/>
 
 <!-- # ReWeighting Configuration Options -->
 <!-- # ###################################################### -->
 
 <!-- # Convert Dials in output statements using dial conversion card -->
 <config convert_dials='0'/>
 
 <!-- # Vetos can be used to specify RW dials NOT to be loaded in -->
 <!-- # Useful if one specific one has an issue -->
 <config FitWeight_fNIWGRW_veto=''/>
 <config FitWeight_fNuwroRW_veto=''/>
 <config FitWeight_fNeutRW_veto=''/>
 <config FitWeight_fGenieRW_veto=''/>
 
 
 <!-- # Output Options -->
 <!-- # ###################################################### -->
 
 <!-- # Save Nominal prediction with all rw engines at default -->
 <config savenominal='0'/>
 
 <!-- # Save prefit with values at starting values -->
 <config saveprefit='0'/>
 
 <!-- # Here's the full list of drawing options -->
 <!-- # See src/FitBase/Measurement1D::Write for more info -->
 <!-- #config drawopts DATA/MC/EVT/FINE/RATIO/MODES/SHAPE/RESIDUAL/MATRIX/FLUX/MASK/MAP -->
 <!-- #config drawopts DATA/MC -->
 <config drawopts='DATA/MC/EVT/FINE/RATIO/MODES/SHAPE/FLUX/XSEC/MASK/COV/INCOV/DECOMP/CANVPDG/CANVMC/SETTINGS'/>
 
 <config InterpolateSigmaQ0Histogram='1' />
 <config InterpolateSigmaQ0HistogramRes='100' />
 <config InterpolateSigmaQ0HistogramThrow='1' />
 <config InterpolateSigmaQ0HistogramNTHROWS='100000' />
 
 <!-- # Save the shape scaling applied with option SHAPE into the main MC hist -->
 <config saveshapescaling='0'/>
 
 <config CorrectGENIEMECNorm='1'/>
 
 <!-- # Set style of 1D output histograms -->
 <config linecolour='1'/>
 <config linestyle='1'/>
 <config linewidth='1'/>
 
 <!-- # For GenericFlux -->
 <config isLiteMode='0'/>
 
 <!-- # Statistical Options -->
 <!-- # ###################################################### -->
 
 <!-- # Add MC Statistical error to likelihoods -->
 <config addmcerror='0'/>
 
 <!-- # NUISMIN Configurations -->
 <!-- # ###################################################### -->
 
 <config MAXCALLS='1000000'/>
 <config MAXITERATIONS='1000000'/>
 <config TOLERANCE='0.001'/>
 
 <!-- # Number of events required in low stats routines -->
 <config LOWSTATEVENTS='25000'/>
 
 
 <!-- # Error band generator configs -->
 <!-- # ###################################################### -->
 
 <!-- # For -f ErrorBands creates error bands for given measurements -->
 <!-- # How many throws do we want (The higher the better precision) -->
 <config error_throws='250'/>
 
 <!-- # Are we throwing uniform or according to Gaussian? -->
 <!-- # Only use uniform if wanting to study the limits of a dial. -->
 <config error_uniform='0'/>
 <config WriteSeperateStacks='1'/>
 
 <!-- # Other Individual Case Configs -->
 <!-- # ###################################################### -->
 
 <!-- # Covariance throw options for fake data studies with MiniBooNE data. -->
 <config thrown_covariance='FULL'/>
 <config throw_mc_stat='0.0'/>
 <config throw_diag_syst='0'/>
 <config throw_corr_syst='0'/>
 <config throw_mc_stat='0'/>
 
 <!-- # Apply a shift to the muon momentum before calculation of Q2 -->
 <config muon_momentum_shift='0.0'/>
 <config muon_momentum_throw='0'/>
 
 <!-- # MINERvA Specific Configs -->
 <config MINERvA_XSec_CCinc_2DEavq3_nu_hadron_cut='0'/>
 <config MINERvA_CCinc_XSec_2DEavq3_nu_useq3true='0'/>
 <config Modes_split_PN_NN='0'/>
 <config SignalReconfigures='0'/>
 
 <!-- # SciBooNE specific -->
 <config SciBarDensity='1.04'/>
 <config SciBarRecoDist='12.0'/>
 <config PenetratingMuonEnergy='1.4'/>
 <config FlatEfficiency='1.0'/>
 <config NumRangeSteps='50'/>
 <config UseProton='true'/>
 <config UseZackEff='false'/>
 
 <config MINERvADensity='1.04'/>
 <config MINERvARecoDist='10.0'/>
 
 <config GENIEWeightEngine_CCRESMode="kModeMaMv"/>
 
 <config NToyThrows='100000' />
 
 
 <config GENIEXSecModelCCRES="genie::ReinSehgalRESPXSec" />
 <config GENIEXSecModelCOH="genie::ReinSehgalCOHPiPXSec" />
 <config GENIEXSecModelCCQE="genie::LwlynSmithQELCCPXSec" />
 
 <!--
 <config GENIEXSecModelCCQE="genie::NievesQELCCPXSec" />
 <config GENIEXSecModelCCRES="genie::BergerSehgalRESPXSec2014" />
 <config GENIEXSecModelCOH="genie::BergerSehgalCOHPiPXSec2015" />
 -->
 
 <config UseShapeCovar="0" />
 <config CC0piNBINS="156" />
 
 </nuisance>