Page MenuHomeHEPForge
Files F8309039

libtool.m4
No OneTemporary
Actions

libtool.m4
View Options

This file is larger than 256 KB, so syntax highlighting was skipped.
# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
#
# Copyright (C) 1996-2001, 2003-2015 Free Software Foundation, Inc.
# Written by Gordon Matzigkeit, 1996
#
# This file is free software; the Free Software Foundation gives
# unlimited permission to copy and/or distribute it, with or without
# modifications, as long as this notice is preserved.
m4_define([_LT_COPYING], [dnl
# Copyright (C) 2014 Free Software Foundation, Inc.
# This is free software; see the source for copying conditions. There is NO
# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# GNU Libtool is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of of the License, or
# (at your option) any later version.
#
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program or library that is built
# using GNU Libtool, you may include this file under the same
# distribution terms that you use for the rest of that program.
#
# GNU Libtool is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
])
# serial 58 LT_INIT
# LT_PREREQ(VERSION)
# ------------------
# Complain and exit if this libtool version is less that VERSION.
m4_defun([LT_PREREQ],
[m4_if(m4_version_compare(m4_defn([LT_PACKAGE_VERSION]), [$1]), -1,
[m4_default([$3],
[m4_fatal([Libtool version $1 or higher is required],
63)])],
[$2])])
# _LT_CHECK_BUILDDIR
# ------------------
# Complain if the absolute build directory name contains unusual characters
m4_defun([_LT_CHECK_BUILDDIR],
[case `pwd` in
*\ * | *\ *)
AC_MSG_WARN([Libtool does not cope well with whitespace in `pwd`]) ;;
esac
])
# LT_INIT([OPTIONS])
# ------------------
AC_DEFUN([LT_INIT],
[AC_PREREQ([2.62])dnl We use AC_PATH_PROGS_FEATURE_CHECK
AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl
AC_BEFORE([$0], [LT_LANG])dnl
AC_BEFORE([$0], [LT_OUTPUT])dnl
AC_BEFORE([$0], [LTDL_INIT])dnl
m4_require([_LT_CHECK_BUILDDIR])dnl
dnl Autoconf doesn't catch unexpanded LT_ macros by default:
m4_pattern_forbid([^_?LT_[A-Z_]+$])dnl
m4_pattern_allow([^(_LT_EOF|LT_DLGLOBAL|LT_DLLAZY_OR_NOW|LT_MULTI_MODULE)$])dnl
dnl aclocal doesn't pull ltoptions.m4, ltsugar.m4, or ltversion.m4
dnl unless we require an AC_DEFUNed macro:
AC_REQUIRE([LTOPTIONS_VERSION])dnl
AC_REQUIRE([LTSUGAR_VERSION])dnl
AC_REQUIRE([LTVERSION_VERSION])dnl
AC_REQUIRE([LTOBSOLETE_VERSION])dnl
m4_require([_LT_PROG_LTMAIN])dnl
_LT_SHELL_INIT([SHELL=${CONFIG_SHELL-/bin/sh}])
dnl Parse OPTIONS
_LT_SET_OPTIONS([$0], [$1])
# This can be used to rebuild libtool when needed
LIBTOOL_DEPS=$ltmain
# Always use our own libtool.
LIBTOOL='$(SHELL) $(top_builddir)/libtool'
AC_SUBST(LIBTOOL)dnl
_LT_SETUP
# Only expand once:
m4_define([LT_INIT])
])# LT_INIT
# Old names:
AU_ALIAS([AC_PROG_LIBTOOL], [LT_INIT])
AU_ALIAS([AM_PROG_LIBTOOL], [LT_INIT])
dnl aclocal-1.4 backwards compatibility:
dnl AC_DEFUN([AC_PROG_LIBTOOL], [])
dnl AC_DEFUN([AM_PROG_LIBTOOL], [])
# _LT_PREPARE_CC_BASENAME
# -----------------------
m4_defun([_LT_PREPARE_CC_BASENAME], [
# Calculate cc_basename. Skip known compiler wrappers and cross-prefix.
func_cc_basename ()
{
for cc_temp in @S|@*""; do
case $cc_temp in
compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;;
distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;;
\-*) ;;
*) break;;
esac
done
func_cc_basename_result=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
}
])# _LT_PREPARE_CC_BASENAME
# _LT_CC_BASENAME(CC)
# -------------------
# It would be clearer to call AC_REQUIREs from _LT_PREPARE_CC_BASENAME,
# but that macro is also expanded into generated libtool script, which
# arranges for $SED and $ECHO to be set by different means.
m4_defun([_LT_CC_BASENAME],
[m4_require([_LT_PREPARE_CC_BASENAME])dnl
AC_REQUIRE([_LT_DECL_SED])dnl
AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])dnl
func_cc_basename $1
cc_basename=$func_cc_basename_result
])
# _LT_FILEUTILS_DEFAULTS
# ----------------------
# It is okay to use these file commands and assume they have been set
# sensibly after 'm4_require([_LT_FILEUTILS_DEFAULTS])'.
m4_defun([_LT_FILEUTILS_DEFAULTS],
[: ${CP="cp -f"}
: ${MV="mv -f"}
: ${RM="rm -f"}
])# _LT_FILEUTILS_DEFAULTS
# _LT_SETUP
# ---------
m4_defun([_LT_SETUP],
[AC_REQUIRE([AC_CANONICAL_HOST])dnl
AC_REQUIRE([AC_CANONICAL_BUILD])dnl
AC_REQUIRE([_LT_PREPARE_SED_QUOTE_VARS])dnl
AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])dnl
_LT_DECL([], [PATH_SEPARATOR], [1], [The PATH separator for the build system])dnl
dnl
_LT_DECL([], [host_alias], [0], [The host system])dnl
_LT_DECL([], [host], [0])dnl
_LT_DECL([], [host_os], [0])dnl
dnl
_LT_DECL([], [build_alias], [0], [The build system])dnl
_LT_DECL([], [build], [0])dnl
_LT_DECL([], [build_os], [0])dnl
dnl
AC_REQUIRE([AC_PROG_CC])dnl
AC_REQUIRE([LT_PATH_LD])dnl
AC_REQUIRE([LT_PATH_NM])dnl
dnl
AC_REQUIRE([AC_PROG_LN_S])dnl
test -z "$LN_S" && LN_S="ln -s"
_LT_DECL([], [LN_S], [1], [Whether we need soft or hard links])dnl
dnl
AC_REQUIRE([LT_CMD_MAX_LEN])dnl
_LT_DECL([objext], [ac_objext], [0], [Object file suffix (normally "o")])dnl
_LT_DECL([], [exeext], [0], [Executable file suffix (normally "")])dnl
dnl
m4_require([_LT_FILEUTILS_DEFAULTS])dnl
m4_require([_LT_CHECK_SHELL_FEATURES])dnl
m4_require([_LT_PATH_CONVERSION_FUNCTIONS])dnl
m4_require([_LT_CMD_RELOAD])dnl
m4_require([_LT_CHECK_MAGIC_METHOD])dnl
m4_require([_LT_CHECK_SHAREDLIB_FROM_LINKLIB])dnl
m4_require([_LT_CMD_OLD_ARCHIVE])dnl
m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
m4_require([_LT_WITH_SYSROOT])dnl
m4_require([_LT_CMD_TRUNCATE])dnl
_LT_CONFIG_LIBTOOL_INIT([
# See if we are running on zsh, and set the options that allow our
# commands through without removal of \ escapes INIT.
if test -n "\${ZSH_VERSION+set}"; then
setopt NO_GLOB_SUBST
fi
])
if test -n "${ZSH_VERSION+set}"; then
setopt NO_GLOB_SUBST
fi
_LT_CHECK_OBJDIR
m4_require([_LT_TAG_COMPILER])dnl
case $host_os in
aix3*)
# AIX sometimes has problems with the GCC collect2 program. For some
# reason, if we set the COLLECT_NAMES environment variable, the problems
# vanish in a puff of smoke.
if test set != "${COLLECT_NAMES+set}"; then
COLLECT_NAMES=
export COLLECT_NAMES
fi
;;
esac
# Global variables:
ofile=libtool
can_build_shared=yes
# All known linkers require a '.a' archive for static linking (except MSVC,
# which needs '.lib').
libext=a
with_gnu_ld=$lt_cv_prog_gnu_ld
old_CC=$CC
old_CFLAGS=$CFLAGS
# Set sane defaults for various variables
test -z "$CC" && CC=cc
test -z "$LTCC" && LTCC=$CC
test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
test -z "$LD" && LD=ld
test -z "$ac_objext" && ac_objext=o
_LT_CC_BASENAME([$compiler])
# Only perform the check for file, if the check method requires it
test -z "$MAGIC_CMD" && MAGIC_CMD=file
case $deplibs_check_method in
file_magic*)
if test "$file_magic_cmd" = '$MAGIC_CMD'; then
_LT_PATH_MAGIC
fi
;;
esac
# Use C for the default configuration in the libtool script
LT_SUPPORTED_TAG([CC])
_LT_LANG_C_CONFIG
_LT_LANG_DEFAULT_CONFIG
_LT_CONFIG_COMMANDS
])# _LT_SETUP
# _LT_PREPARE_SED_QUOTE_VARS
# --------------------------
# Define a few sed substitution that help us do robust quoting.
m4_defun([_LT_PREPARE_SED_QUOTE_VARS],
[# Backslashify metacharacters that are still active within
# double-quoted strings.
sed_quote_subst='s/\([["`$\\]]\)/\\\1/g'
# Same as above, but do not quote variable references.
double_quote_subst='s/\([["`\\]]\)/\\\1/g'
# Sed substitution to delay expansion of an escaped shell variable in a
# double_quote_subst'ed string.
delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
# Sed substitution to delay expansion of an escaped single quote.
delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
# Sed substitution to avoid accidental globbing in evaled expressions
no_glob_subst='s/\*/\\\*/g'
])
# _LT_PROG_LTMAIN
# ---------------
# Note that this code is called both from 'configure', and 'config.status'
# now that we use AC_CONFIG_COMMANDS to generate libtool. Notably,
# 'config.status' has no value for ac_aux_dir unless we are using Automake,
# so we pass a copy along to make sure it has a sensible value anyway.
m4_defun([_LT_PROG_LTMAIN],
[m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([ltmain.sh])])dnl
_LT_CONFIG_LIBTOOL_INIT([ac_aux_dir='$ac_aux_dir'])
ltmain=$ac_aux_dir/ltmain.sh
])# _LT_PROG_LTMAIN
## ------------------------------------- ##
## Accumulate code for creating libtool. ##
## ------------------------------------- ##
# So that we can recreate a full libtool script including additional
# tags, we accumulate the chunks of code to send to AC_CONFIG_COMMANDS
# in macros and then make a single call at the end using the 'libtool'
# label.
# _LT_CONFIG_LIBTOOL_INIT([INIT-COMMANDS])
# ----------------------------------------
# Register INIT-COMMANDS to be passed to AC_CONFIG_COMMANDS later.
m4_define([_LT_CONFIG_LIBTOOL_INIT],
[m4_ifval([$1],
[m4_append([_LT_OUTPUT_LIBTOOL_INIT],
[$1
])])])
# Initialize.
m4_define([_LT_OUTPUT_LIBTOOL_INIT])
# _LT_CONFIG_LIBTOOL([COMMANDS])
# ------------------------------
# Register COMMANDS to be passed to AC_CONFIG_COMMANDS later.
m4_define([_LT_CONFIG_LIBTOOL],
[m4_ifval([$1],
[m4_append([_LT_OUTPUT_LIBTOOL_COMMANDS],
[$1
])])])
# Initialize.
m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS])
# _LT_CONFIG_SAVE_COMMANDS([COMMANDS], [INIT_COMMANDS])
# -----------------------------------------------------
m4_defun([_LT_CONFIG_SAVE_COMMANDS],
[_LT_CONFIG_LIBTOOL([$1])
_LT_CONFIG_LIBTOOL_INIT([$2])
])
# _LT_FORMAT_COMMENT([COMMENT])
# -----------------------------
# Add leading comment marks to the start of each line, and a trailing
# full-stop to the whole comment if one is not present already.
m4_define([_LT_FORMAT_COMMENT],
[m4_ifval([$1], [
m4_bpatsubst([m4_bpatsubst([$1], [^ *], [# ])],
[['`$\]], [\\\&])]m4_bmatch([$1], [[!?.]$], [], [.])
)])
## ------------------------ ##
## FIXME: Eliminate VARNAME ##
## ------------------------ ##
# _LT_DECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION], [IS-TAGGED?])
# -------------------------------------------------------------------
# CONFIGNAME is the name given to the value in the libtool script.
# VARNAME is the (base) name used in the configure script.
# VALUE may be 0, 1 or 2 for a computed quote escaped value based on
# VARNAME. Any other value will be used directly.
m4_define([_LT_DECL],
[lt_if_append_uniq([lt_decl_varnames], [$2], [, ],
[lt_dict_add_subkey([lt_decl_dict], [$2], [libtool_name],
[m4_ifval([$1], [$1], [$2])])
lt_dict_add_subkey([lt_decl_dict], [$2], [value], [$3])
m4_ifval([$4],
[lt_dict_add_subkey([lt_decl_dict], [$2], [description], [$4])])
lt_dict_add_subkey([lt_decl_dict], [$2],
[tagged?], [m4_ifval([$5], [yes], [no])])])
])
# _LT_TAGDECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION])
# --------------------------------------------------------
m4_define([_LT_TAGDECL], [_LT_DECL([$1], [$2], [$3], [$4], [yes])])
# lt_decl_tag_varnames([SEPARATOR], [VARNAME1...])
# ------------------------------------------------
m4_define([lt_decl_tag_varnames],
[_lt_decl_filter([tagged?], [yes], $@)])
# _lt_decl_filter(SUBKEY, VALUE, [SEPARATOR], [VARNAME1..])
# ---------------------------------------------------------
m4_define([_lt_decl_filter],
[m4_case([$#],
[0], [m4_fatal([$0: too few arguments: $#])],
[1], [m4_fatal([$0: too few arguments: $#: $1])],
[2], [lt_dict_filter([lt_decl_dict], [$1], [$2], [], lt_decl_varnames)],
[3], [lt_dict_filter([lt_decl_dict], [$1], [$2], [$3], lt_decl_varnames)],
[lt_dict_filter([lt_decl_dict], $@)])[]dnl
])
# lt_decl_quote_varnames([SEPARATOR], [VARNAME1...])
# --------------------------------------------------
m4_define([lt_decl_quote_varnames],
[_lt_decl_filter([value], [1], $@)])
# lt_decl_dquote_varnames([SEPARATOR], [VARNAME1...])
# ---------------------------------------------------
m4_define([lt_decl_dquote_varnames],
[_lt_decl_filter([value], [2], $@)])
# lt_decl_varnames_tagged([SEPARATOR], [VARNAME1...])
# ---------------------------------------------------
m4_define([lt_decl_varnames_tagged],
[m4_assert([$# <= 2])dnl
_$0(m4_quote(m4_default([$1], [[, ]])),
m4_ifval([$2], [[$2]], [m4_dquote(lt_decl_tag_varnames)]),
m4_split(m4_normalize(m4_quote(_LT_TAGS)), [ ]))])
m4_define([_lt_decl_varnames_tagged],
[m4_ifval([$3], [lt_combine([$1], [$2], [_], $3)])])
# lt_decl_all_varnames([SEPARATOR], [VARNAME1...])
# ------------------------------------------------
m4_define([lt_decl_all_varnames],
[_$0(m4_quote(m4_default([$1], [[, ]])),
m4_if([$2], [],
m4_quote(lt_decl_varnames),
m4_quote(m4_shift($@))))[]dnl
])
m4_define([_lt_decl_all_varnames],
[lt_join($@, lt_decl_varnames_tagged([$1],
lt_decl_tag_varnames([[, ]], m4_shift($@))))dnl
])
# _LT_CONFIG_STATUS_DECLARE([VARNAME])
# ------------------------------------
# Quote a variable value, and forward it to 'config.status' so that its
# declaration there will have the same value as in 'configure'. VARNAME
# must have a single quote delimited value for this to work.
m4_define([_LT_CONFIG_STATUS_DECLARE],
[$1='`$ECHO "$][$1" | $SED "$delay_single_quote_subst"`'])
# _LT_CONFIG_STATUS_DECLARATIONS
# ------------------------------
# We delimit libtool config variables with single quotes, so when
# we write them to config.status, we have to be sure to quote all
# embedded single quotes properly. In configure, this macro expands
# each variable declared with _LT_DECL (and _LT_TAGDECL) into:
#
# <var>='`$ECHO "$<var>" | $SED "$delay_single_quote_subst"`'
m4_defun([_LT_CONFIG_STATUS_DECLARATIONS],
[m4_foreach([_lt_var], m4_quote(lt_decl_all_varnames),
[m4_n([_LT_CONFIG_STATUS_DECLARE(_lt_var)])])])
# _LT_LIBTOOL_TAGS
# ----------------
# Output comment and list of tags supported by the script
m4_defun([_LT_LIBTOOL_TAGS],
[_LT_FORMAT_COMMENT([The names of the tagged configurations supported by this script])dnl
available_tags='_LT_TAGS'dnl
])
# _LT_LIBTOOL_DECLARE(VARNAME, [TAG])
# -----------------------------------
# Extract the dictionary values for VARNAME (optionally with TAG) and
# expand to a commented shell variable setting:
#
# # Some comment about what VAR is for.
# visible_name=$lt_internal_name
m4_define([_LT_LIBTOOL_DECLARE],
[_LT_FORMAT_COMMENT(m4_quote(lt_dict_fetch([lt_decl_dict], [$1],
[description])))[]dnl
m4_pushdef([_libtool_name],
m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [libtool_name])))[]dnl
m4_case(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [value])),
[0], [_libtool_name=[$]$1],
[1], [_libtool_name=$lt_[]$1],
[2], [_libtool_name=$lt_[]$1],
[_libtool_name=lt_dict_fetch([lt_decl_dict], [$1], [value])])[]dnl
m4_ifval([$2], [_$2])[]m4_popdef([_libtool_name])[]dnl
])
# _LT_LIBTOOL_CONFIG_VARS
# -----------------------
# Produce commented declarations of non-tagged libtool config variables
# suitable for insertion in the LIBTOOL CONFIG section of the 'libtool'
# script. Tagged libtool config variables (even for the LIBTOOL CONFIG
# section) are produced by _LT_LIBTOOL_TAG_VARS.
m4_defun([_LT_LIBTOOL_CONFIG_VARS],
[m4_foreach([_lt_var],
m4_quote(_lt_decl_filter([tagged?], [no], [], lt_decl_varnames)),
[m4_n([_LT_LIBTOOL_DECLARE(_lt_var)])])])
# _LT_LIBTOOL_TAG_VARS(TAG)
# -------------------------
m4_define([_LT_LIBTOOL_TAG_VARS],
[m4_foreach([_lt_var], m4_quote(lt_decl_tag_varnames),
[m4_n([_LT_LIBTOOL_DECLARE(_lt_var, [$1])])])])
# _LT_TAGVAR(VARNAME, [TAGNAME])
# ------------------------------
m4_define([_LT_TAGVAR], [m4_ifval([$2], [$1_$2], [$1])])
# _LT_CONFIG_COMMANDS
# -------------------
# Send accumulated output to $CONFIG_STATUS. Thanks to the lists of
# variables for single and double quote escaping we saved from calls
# to _LT_DECL, we can put quote escaped variables declarations
# into 'config.status', and then the shell code to quote escape them in
# for loops in 'config.status'. Finally, any additional code accumulated
# from calls to _LT_CONFIG_LIBTOOL_INIT is expanded.
m4_defun([_LT_CONFIG_COMMANDS],
[AC_PROVIDE_IFELSE([LT_OUTPUT],
dnl If the libtool generation code has been placed in $CONFIG_LT,
dnl instead of duplicating it all over again into config.status,
dnl then we will have config.status run $CONFIG_LT later, so it
dnl needs to know what name is stored there:
[AC_CONFIG_COMMANDS([libtool],
[$SHELL $CONFIG_LT || AS_EXIT(1)], [CONFIG_LT='$CONFIG_LT'])],
dnl If the libtool generation code is destined for config.status,
dnl expand the accumulated commands and init code now:
[AC_CONFIG_COMMANDS([libtool],
[_LT_OUTPUT_LIBTOOL_COMMANDS], [_LT_OUTPUT_LIBTOOL_COMMANDS_INIT])])
])#_LT_CONFIG_COMMANDS
# Initialize.
m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS_INIT],
[
# The HP-UX ksh and POSIX shell print the target directory to stdout
# if CDPATH is set.
(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
sed_quote_subst='$sed_quote_subst'
double_quote_subst='$double_quote_subst'
delay_variable_subst='$delay_variable_subst'
_LT_CONFIG_STATUS_DECLARATIONS
LTCC='$LTCC'
LTCFLAGS='$LTCFLAGS'
compiler='$compiler_DEFAULT'
# A function that is used when there is no print builtin or printf.
func_fallback_echo ()
{
eval 'cat <<_LTECHO_EOF
\$[]1
_LTECHO_EOF'
}
# Quote evaled strings.
for var in lt_decl_all_varnames([[ \
]], lt_decl_quote_varnames); do
case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
*[[\\\\\\\`\\"\\\$]]*)
eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes
;;
*)
eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
;;
esac
done
# Double-quote double-evaled strings.
for var in lt_decl_all_varnames([[ \
]], lt_decl_dquote_varnames); do
case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
*[[\\\\\\\`\\"\\\$]]*)
eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes
;;
*)
eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
;;
esac
done
_LT_OUTPUT_LIBTOOL_INIT
])
# _LT_GENERATED_FILE_INIT(FILE, [COMMENT])
# ------------------------------------
# Generate a child script FILE with all initialization necessary to
# reuse the environment learned by the parent script, and make the
# file executable. If COMMENT is supplied, it is inserted after the
# '#!' sequence but before initialization text begins. After this
# macro, additional text can be appended to FILE to form the body of
# the child script. The macro ends with non-zero status if the
# file could not be fully written (such as if the disk is full).
m4_ifdef([AS_INIT_GENERATED],
[m4_defun([_LT_GENERATED_FILE_INIT],[AS_INIT_GENERATED($@)])],
[m4_defun([_LT_GENERATED_FILE_INIT],
[m4_require([AS_PREPARE])]dnl
[m4_pushdef([AS_MESSAGE_LOG_FD])]dnl
[lt_write_fail=0
cat >$1 <<_ASEOF || lt_write_fail=1
#! $SHELL
# Generated by $as_me.
$2
SHELL=\${CONFIG_SHELL-$SHELL}
export SHELL
_ASEOF
cat >>$1 <<\_ASEOF || lt_write_fail=1
AS_SHELL_SANITIZE
_AS_PREPARE
exec AS_MESSAGE_FD>&1
_ASEOF
test 0 = "$lt_write_fail" && chmod +x $1[]dnl
m4_popdef([AS_MESSAGE_LOG_FD])])])# _LT_GENERATED_FILE_INIT
# LT_OUTPUT
# ---------
# This macro allows early generation of the libtool script (before
# AC_OUTPUT is called), incase it is used in configure for compilation
# tests.
AC_DEFUN([LT_OUTPUT],
[: ${CONFIG_LT=./config.lt}
AC_MSG_NOTICE([creating $CONFIG_LT])
_LT_GENERATED_FILE_INIT(["$CONFIG_LT"],
[# Run this file to recreate a libtool stub with the current configuration.])
cat >>"$CONFIG_LT" <<\_LTEOF
lt_cl_silent=false
exec AS_MESSAGE_LOG_FD>>config.log
{
echo
AS_BOX([Running $as_me.])
} >&AS_MESSAGE_LOG_FD
lt_cl_help="\
'$as_me' creates a local libtool stub from the current configuration,
for use in further configure time tests before the real libtool is
generated.
Usage: $[0] [[OPTIONS]]
-h, --help print this help, then exit
-V, --version print version number, then exit
-q, --quiet do not print progress messages
-d, --debug don't remove temporary files
Report bugs to <bug-libtool@gnu.org>."
lt_cl_version="\
m4_ifset([AC_PACKAGE_NAME], [AC_PACKAGE_NAME ])config.lt[]dnl
m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION])
configured by $[0], generated by m4_PACKAGE_STRING.
Copyright (C) 2011 Free Software Foundation, Inc.
This config.lt script is free software; the Free Software Foundation
gives unlimited permision to copy, distribute and modify it."
while test 0 != $[#]
do
case $[1] in
--version | --v* | -V )
echo "$lt_cl_version"; exit 0 ;;
--help | --h* | -h )
echo "$lt_cl_help"; exit 0 ;;
--debug | --d* | -d )
debug=: ;;
--quiet | --q* | --silent | --s* | -q )
lt_cl_silent=: ;;
-*) AC_MSG_ERROR([unrecognized option: $[1]
Try '$[0] --help' for more information.]) ;;
*) AC_MSG_ERROR([unrecognized argument: $[1]
Try '$[0] --help' for more information.]) ;;
esac
shift
done
if $lt_cl_silent; then
exec AS_MESSAGE_FD>/dev/null
fi
_LTEOF
cat >>"$CONFIG_LT" <<_LTEOF
_LT_OUTPUT_LIBTOOL_COMMANDS_INIT
_LTEOF
cat >>"$CONFIG_LT" <<\_LTEOF
AC_MSG_NOTICE([creating $ofile])
_LT_OUTPUT_LIBTOOL_COMMANDS
AS_EXIT(0)
_LTEOF
chmod +x "$CONFIG_LT"
# configure is writing to config.log, but config.lt does its own redirection,
# appending to config.log, which fails on DOS, as config.log is still kept
# open by configure. Here we exec the FD to /dev/null, effectively closing
# config.log, so it can be properly (re)opened and appended to by config.lt.
lt_cl_success=:
test yes = "$silent" &&
lt_config_lt_args="$lt_config_lt_args --quiet"
exec AS_MESSAGE_LOG_FD>/dev/null
$SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false
exec AS_MESSAGE_LOG_FD>>config.log
$lt_cl_success || AS_EXIT(1)
])# LT_OUTPUT
# _LT_CONFIG(TAG)
# ---------------
# If TAG is the built-in tag, create an initial libtool script with a
# default configuration from the untagged config vars. Otherwise add code
# to config.status for appending the configuration named by TAG from the
# matching tagged config vars.
m4_defun([_LT_CONFIG],
[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
_LT_CONFIG_SAVE_COMMANDS([
m4_define([_LT_TAG], m4_if([$1], [], [C], [$1]))dnl
m4_if(_LT_TAG, [C], [
# See if we are running on zsh, and set the options that allow our
# commands through without removal of \ escapes.
if test -n "${ZSH_VERSION+set}"; then
setopt NO_GLOB_SUBST
fi
cfgfile=${ofile}T
trap "$RM \"$cfgfile\"; exit 1" 1 2 15
$RM "$cfgfile"
cat <<_LT_EOF >> "$cfgfile"
#! $SHELL
# Generated automatically by $as_me ($PACKAGE) $VERSION
# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
# NOTE: Changes made to this file will be lost: look at ltmain.sh.
# Provide generalized library-building support services.
# Written by Gordon Matzigkeit, 1996
_LT_COPYING
_LT_LIBTOOL_TAGS
# Configured defaults for sys_lib_dlsearch_path munging.
: \${LT_SYS_LIBRARY_PATH="$configure_time_lt_sys_library_path"}
# ### BEGIN LIBTOOL CONFIG
_LT_LIBTOOL_CONFIG_VARS
_LT_LIBTOOL_TAG_VARS
# ### END LIBTOOL CONFIG
_LT_EOF
cat <<'_LT_EOF' >> "$cfgfile"
# ### BEGIN FUNCTIONS SHARED WITH CONFIGURE
_LT_PREPARE_MUNGE_PATH_LIST
_LT_PREPARE_CC_BASENAME
# ### END FUNCTIONS SHARED WITH CONFIGURE
_LT_EOF
case $host_os in
aix3*)
cat <<\_LT_EOF >> "$cfgfile"
# AIX sometimes has problems with the GCC collect2 program. For some
# reason, if we set the COLLECT_NAMES environment variable, the problems
# vanish in a puff of smoke.
if test set != "${COLLECT_NAMES+set}"; then
COLLECT_NAMES=
export COLLECT_NAMES
fi
_LT_EOF
;;
esac
_LT_PROG_LTMAIN
# We use sed instead of cat because bash on DJGPP gets confused if
# if finds mixed CR/LF and LF-only lines. Since sed operates in
# text mode, it properly converts lines to CR/LF. This bash problem
# is reportedly fixed, but why not run on old versions too?
sed '$q' "$ltmain" >> "$cfgfile" \
|| (rm -f "$cfgfile"; exit 1)
mv -f "$cfgfile" "$ofile" ||
(rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
chmod +x "$ofile"
],
[cat <<_LT_EOF >> "$ofile"
dnl Unfortunately we have to use $1 here, since _LT_TAG is not expanded
dnl in a comment (ie after a #).
# ### BEGIN LIBTOOL TAG CONFIG: $1
_LT_LIBTOOL_TAG_VARS(_LT_TAG)
# ### END LIBTOOL TAG CONFIG: $1
_LT_EOF
])dnl /m4_if
],
[m4_if([$1], [], [
PACKAGE='$PACKAGE'
VERSION='$VERSION'
RM='$RM'
ofile='$ofile'], [])
])dnl /_LT_CONFIG_SAVE_COMMANDS
])# _LT_CONFIG
# LT_SUPPORTED_TAG(TAG)
# ---------------------
# Trace this macro to discover what tags are supported by the libtool
# --tag option, using:
# autoconf --trace 'LT_SUPPORTED_TAG:$1'
AC_DEFUN([LT_SUPPORTED_TAG], [])
# C support is built-in for now
m4_define([_LT_LANG_C_enabled], [])
m4_define([_LT_TAGS], [])
# LT_LANG(LANG)
# -------------
# Enable libtool support for the given language if not already enabled.
AC_DEFUN([LT_LANG],
[AC_BEFORE([$0], [LT_OUTPUT])dnl
m4_case([$1],
[C], [_LT_LANG(C)],
[C++], [_LT_LANG(CXX)],
[Go], [_LT_LANG(GO)],
[Java], [_LT_LANG(GCJ)],
[Fortran 77], [_LT_LANG(F77)],
[Fortran], [_LT_LANG(FC)],
[Windows Resource], [_LT_LANG(RC)],
[m4_ifdef([_LT_LANG_]$1[_CONFIG],
[_LT_LANG($1)],
[m4_fatal([$0: unsupported language: "$1"])])])dnl
])# LT_LANG
# _LT_LANG(LANGNAME)
# ------------------
m4_defun([_LT_LANG],
[m4_ifdef([_LT_LANG_]$1[_enabled], [],
[LT_SUPPORTED_TAG([$1])dnl
m4_append([_LT_TAGS], [$1 ])dnl
m4_define([_LT_LANG_]$1[_enabled], [])dnl
_LT_LANG_$1_CONFIG($1)])dnl
])# _LT_LANG
m4_ifndef([AC_PROG_GO], [
############################################################
# NOTE: This macro has been submitted for inclusion into #
# GNU Autoconf as AC_PROG_GO. When it is available in #
# a released version of Autoconf we should remove this #
# macro and use it instead. #
############################################################
m4_defun([AC_PROG_GO],
[AC_LANG_PUSH(Go)dnl
AC_ARG_VAR([GOC], [Go compiler command])dnl
AC_ARG_VAR([GOFLAGS], [Go compiler flags])dnl
_AC_ARG_VAR_LDFLAGS()dnl
AC_CHECK_TOOL(GOC, gccgo)
if test -z "$GOC"; then
if test -n "$ac_tool_prefix"; then
AC_CHECK_PROG(GOC, [${ac_tool_prefix}gccgo], [${ac_tool_prefix}gccgo])
fi
fi
if test -z "$GOC"; then
AC_CHECK_PROG(GOC, gccgo, gccgo, false)
fi
])#m4_defun
])#m4_ifndef
# _LT_LANG_DEFAULT_CONFIG
# -----------------------
m4_defun([_LT_LANG_DEFAULT_CONFIG],
[AC_PROVIDE_IFELSE([AC_PROG_CXX],
[LT_LANG(CXX)],
[m4_define([AC_PROG_CXX], defn([AC_PROG_CXX])[LT_LANG(CXX)])])
AC_PROVIDE_IFELSE([AC_PROG_F77],
[LT_LANG(F77)],
[m4_define([AC_PROG_F77], defn([AC_PROG_F77])[LT_LANG(F77)])])
AC_PROVIDE_IFELSE([AC_PROG_FC],
[LT_LANG(FC)],
[m4_define([AC_PROG_FC], defn([AC_PROG_FC])[LT_LANG(FC)])])
dnl The call to [A][M_PROG_GCJ] is quoted like that to stop aclocal
dnl pulling things in needlessly.
AC_PROVIDE_IFELSE([AC_PROG_GCJ],
[LT_LANG(GCJ)],
[AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
[LT_LANG(GCJ)],
[AC_PROVIDE_IFELSE([LT_PROG_GCJ],
[LT_LANG(GCJ)],
[m4_ifdef([AC_PROG_GCJ],
[m4_define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[LT_LANG(GCJ)])])
m4_ifdef([A][M_PROG_GCJ],
[m4_define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[LT_LANG(GCJ)])])
m4_ifdef([LT_PROG_GCJ],
[m4_define([LT_PROG_GCJ], defn([LT_PROG_GCJ])[LT_LANG(GCJ)])])])])])
AC_PROVIDE_IFELSE([AC_PROG_GO],
[LT_LANG(GO)],
[m4_define([AC_PROG_GO], defn([AC_PROG_GO])[LT_LANG(GO)])])
AC_PROVIDE_IFELSE([LT_PROG_RC],
[LT_LANG(RC)],
[m4_define([LT_PROG_RC], defn([LT_PROG_RC])[LT_LANG(RC)])])
])# _LT_LANG_DEFAULT_CONFIG
# Obsolete macros:
AU_DEFUN([AC_LIBTOOL_CXX], [LT_LANG(C++)])
AU_DEFUN([AC_LIBTOOL_F77], [LT_LANG(Fortran 77)])
AU_DEFUN([AC_LIBTOOL_FC], [LT_LANG(Fortran)])
AU_DEFUN([AC_LIBTOOL_GCJ], [LT_LANG(Java)])
AU_DEFUN([AC_LIBTOOL_RC], [LT_LANG(Windows Resource)])
dnl aclocal-1.4 backwards compatibility:
dnl AC_DEFUN([AC_LIBTOOL_CXX], [])
dnl AC_DEFUN([AC_LIBTOOL_F77], [])
dnl AC_DEFUN([AC_LIBTOOL_FC], [])
dnl AC_DEFUN([AC_LIBTOOL_GCJ], [])
dnl AC_DEFUN([AC_LIBTOOL_RC], [])
# _LT_TAG_COMPILER
# ----------------
m4_defun([_LT_TAG_COMPILER],
[AC_REQUIRE([AC_PROG_CC])dnl
_LT_DECL([LTCC], [CC], [1], [A C compiler])dnl
_LT_DECL([LTCFLAGS], [CFLAGS], [1], [LTCC compiler flags])dnl
_LT_TAGDECL([CC], [compiler], [1], [A language specific compiler])dnl
_LT_TAGDECL([with_gcc], [GCC], [0], [Is the compiler the GNU compiler?])dnl
# If no C compiler was specified, use CC.
LTCC=${LTCC-"$CC"}
# If no C compiler flags were specified, use CFLAGS.
LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
# Allow CC to be a program name with arguments.
compiler=$CC
])# _LT_TAG_COMPILER
# _LT_COMPILER_BOILERPLATE
# ------------------------
# Check for compiler boilerplate output or warnings with
# the simple compiler test code.
m4_defun([_LT_COMPILER_BOILERPLATE],
[m4_require([_LT_DECL_SED])dnl
ac_outfile=conftest.$ac_objext
echo "$lt_simple_compile_test_code" >conftest.$ac_ext
eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
_lt_compiler_boilerplate=`cat conftest.err`
$RM conftest*
])# _LT_COMPILER_BOILERPLATE
# _LT_LINKER_BOILERPLATE
# ----------------------
# Check for linker boilerplate output or warnings with
# the simple link test code.
m4_defun([_LT_LINKER_BOILERPLATE],
[m4_require([_LT_DECL_SED])dnl
ac_outfile=conftest.$ac_objext
echo "$lt_simple_link_test_code" >conftest.$ac_ext
eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
_lt_linker_boilerplate=`cat conftest.err`
$RM -r conftest*
])# _LT_LINKER_BOILERPLATE
# _LT_REQUIRED_DARWIN_CHECKS
# -------------------------
m4_defun_once([_LT_REQUIRED_DARWIN_CHECKS],[
case $host_os in
rhapsody* | darwin*)
AC_CHECK_TOOL([DSYMUTIL], [dsymutil], [:])
AC_CHECK_TOOL([NMEDIT], [nmedit], [:])
AC_CHECK_TOOL([LIPO], [lipo], [:])
AC_CHECK_TOOL([OTOOL], [otool], [:])
AC_CHECK_TOOL([OTOOL64], [otool64], [:])
_LT_DECL([], [DSYMUTIL], [1],
[Tool to manipulate archived DWARF debug symbol files on Mac OS X])
_LT_DECL([], [NMEDIT], [1],
[Tool to change global to local symbols on Mac OS X])
_LT_DECL([], [LIPO], [1],
[Tool to manipulate fat objects and archives on Mac OS X])
_LT_DECL([], [OTOOL], [1],
[ldd/readelf like tool for Mach-O binaries on Mac OS X])
_LT_DECL([], [OTOOL64], [1],
[ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4])
AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod],
[lt_cv_apple_cc_single_mod=no
if test -z "$LT_MULTI_MODULE"; then
# By default we will add the -single_module flag. You can override
# by either setting the environment variable LT_MULTI_MODULE
# non-empty at configure time, or by adding -multi_module to the
# link flags.
rm -rf libconftest.dylib*
echo "int foo(void){return 1;}" > conftest.c
echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
-dynamiclib -Wl,-single_module conftest.c" >&AS_MESSAGE_LOG_FD
$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
-dynamiclib -Wl,-single_module conftest.c 2>conftest.err
_lt_result=$?
# If there is a non-empty error log, and "single_module"
# appears in it, assume the flag caused a linker warning
if test -s conftest.err && $GREP single_module conftest.err; then
cat conftest.err >&AS_MESSAGE_LOG_FD
# Otherwise, if the output was created with a 0 exit code from
# the compiler, it worked.
elif test -f libconftest.dylib && test 0 = "$_lt_result"; then
lt_cv_apple_cc_single_mod=yes
else
cat conftest.err >&AS_MESSAGE_LOG_FD
fi
rm -rf libconftest.dylib*
rm -f conftest.*
fi])
AC_CACHE_CHECK([for -exported_symbols_list linker flag],
[lt_cv_ld_exported_symbols_list],
[lt_cv_ld_exported_symbols_list=no
save_LDFLAGS=$LDFLAGS
echo "_main" > conftest.sym
LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
[lt_cv_ld_exported_symbols_list=yes],
[lt_cv_ld_exported_symbols_list=no])
LDFLAGS=$save_LDFLAGS
])
AC_CACHE_CHECK([for -force_load linker flag],[lt_cv_ld_force_load],
[lt_cv_ld_force_load=no
cat > conftest.c << _LT_EOF
int forced_loaded() { return 2;}
_LT_EOF
echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&AS_MESSAGE_LOG_FD
$LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&AS_MESSAGE_LOG_FD
echo "$AR cru libconftest.a conftest.o" >&AS_MESSAGE_LOG_FD
$AR cru libconftest.a conftest.o 2>&AS_MESSAGE_LOG_FD
echo "$RANLIB libconftest.a" >&AS_MESSAGE_LOG_FD
$RANLIB libconftest.a 2>&AS_MESSAGE_LOG_FD
cat > conftest.c << _LT_EOF
int main() { return 0;}
_LT_EOF
echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&AS_MESSAGE_LOG_FD
$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err
_lt_result=$?
if test -s conftest.err && $GREP force_load conftest.err; then
cat conftest.err >&AS_MESSAGE_LOG_FD
elif test -f conftest && test 0 = "$_lt_result" && $GREP forced_load conftest >/dev/null 2>&1; then
lt_cv_ld_force_load=yes
else
cat conftest.err >&AS_MESSAGE_LOG_FD
fi
rm -f conftest.err libconftest.a conftest conftest.c
rm -rf conftest.dSYM
])
case $host_os in
rhapsody* | darwin1.[[012]])
_lt_dar_allow_undefined='$wl-undefined ${wl}suppress' ;;
darwin1.*)
_lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;;
darwin*) # darwin 5.x on
# if running on 10.5 or later, the deployment target defaults
# to the OS version, if on x86, and 10.4, the deployment
# target defaults to 10.4. Don't you love it?
case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
10.0,*86*-darwin8*|10.0,*-darwin[[91]]*)
_lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;;
10.[[012]][[,.]]*)
_lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;;
10.*)
_lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;;
esac
;;
esac
if test yes = "$lt_cv_apple_cc_single_mod"; then
_lt_dar_single_mod='$single_module'
fi
if test yes = "$lt_cv_ld_exported_symbols_list"; then
_lt_dar_export_syms=' $wl-exported_symbols_list,$output_objdir/$libname-symbols.expsym'
else
_lt_dar_export_syms='~$NMEDIT -s $output_objdir/$libname-symbols.expsym $lib'
fi
if test : != "$DSYMUTIL" && test no = "$lt_cv_ld_force_load"; then
_lt_dsymutil='~$DSYMUTIL $lib || :'
else
_lt_dsymutil=
fi
;;
esac
])
# _LT_DARWIN_LINKER_FEATURES([TAG])
# ---------------------------------
# Checks for linker and compiler features on darwin
m4_defun([_LT_DARWIN_LINKER_FEATURES],
[
m4_require([_LT_REQUIRED_DARWIN_CHECKS])
_LT_TAGVAR(archive_cmds_need_lc, $1)=no
_LT_TAGVAR(hardcode_direct, $1)=no
_LT_TAGVAR(hardcode_automatic, $1)=yes
_LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
if test yes = "$lt_cv_ld_force_load"; then
_LT_TAGVAR(whole_archive_flag_spec, $1)='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience $wl-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
m4_case([$1], [F77], [_LT_TAGVAR(compiler_needs_object, $1)=yes],
[FC], [_LT_TAGVAR(compiler_needs_object, $1)=yes])
else
_LT_TAGVAR(whole_archive_flag_spec, $1)=''
fi
_LT_TAGVAR(link_all_deplibs, $1)=yes
_LT_TAGVAR(allow_undefined_flag, $1)=$_lt_dar_allow_undefined
case $cc_basename in
ifort*|nagfor*) _lt_dar_can_shared=yes ;;
*) _lt_dar_can_shared=$GCC ;;
esac
if test yes = "$_lt_dar_can_shared"; then
output_verbose_link_cmd=func_echo_all
_LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dsymutil"
_LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dsymutil"
_LT_TAGVAR(archive_expsym_cmds, $1)="sed 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dar_export_syms$_lt_dsymutil"
_LT_TAGVAR(module_expsym_cmds, $1)="sed -e 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dar_export_syms$_lt_dsymutil"
m4_if([$1], [CXX],
[ if test yes != "$lt_cv_apple_cc_single_mod"; then
_LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \$lib-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$lib-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring$_lt_dsymutil"
_LT_TAGVAR(archive_expsym_cmds, $1)="sed 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \$lib-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$lib-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring$_lt_dar_export_syms$_lt_dsymutil"
fi
],[])
else
_LT_TAGVAR(ld_shlibs, $1)=no
fi
])
# _LT_SYS_MODULE_PATH_AIX([TAGNAME])
# ----------------------------------
# Links a minimal program and checks the executable
# for the system default hardcoded library path. In most cases,
# this is /usr/lib:/lib, but when the MPI compilers are used
# the location of the communication and MPI libs are included too.
# If we don't find anything, use the default library path according
# to the aix ld manual.
# Store the results from the different compilers for each TAGNAME.
# Allow to override them for all tags through lt_cv_aix_libpath.
m4_defun([_LT_SYS_MODULE_PATH_AIX],
[m4_require([_LT_DECL_SED])dnl
if test set = "${lt_cv_aix_libpath+set}"; then
aix_libpath=$lt_cv_aix_libpath
else
AC_CACHE_VAL([_LT_TAGVAR([lt_cv_aix_libpath_], [$1])],
[AC_LINK_IFELSE([AC_LANG_PROGRAM],[
lt_aix_libpath_sed='[
/Import File Strings/,/^$/ {
/^0/ {
s/^0 *\([^ ]*\) *$/\1/
p
}
}]'
_LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
# Check for a 64-bit object if we didn't find anything.
if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then
_LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
fi],[])
if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then
_LT_TAGVAR([lt_cv_aix_libpath_], [$1])=/usr/lib:/lib
fi
])
aix_libpath=$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])
fi
])# _LT_SYS_MODULE_PATH_AIX
# _LT_SHELL_INIT(ARG)
# -------------------
m4_define([_LT_SHELL_INIT],
[m4_divert_text([M4SH-INIT], [$1
])])# _LT_SHELL_INIT
# _LT_PROG_ECHO_BACKSLASH
# -----------------------
# Find how we can fake an echo command that does not interpret backslash.
# In particular, with Autoconf 2.60 or later we add some code to the start
# of the generated configure script that will find a shell with a builtin
# printf (that we can use as an echo command).
m4_defun([_LT_PROG_ECHO_BACKSLASH],
[ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
AC_MSG_CHECKING([how to print strings])
# Test print first, because it will be a builtin if present.
if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \
test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then
ECHO='print -r --'
elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then
ECHO='printf %s\n'
else
# Use this function as a fallback that always works.
func_fallback_echo ()
{
eval 'cat <<_LTECHO_EOF
$[]1
_LTECHO_EOF'
}
ECHO='func_fallback_echo'
fi
# func_echo_all arg...
# Invoke $ECHO with all args, space-separated.
func_echo_all ()
{
$ECHO "$*"
}
case $ECHO in
printf*) AC_MSG_RESULT([printf]) ;;
print*) AC_MSG_RESULT([print -r]) ;;
*) AC_MSG_RESULT([cat]) ;;
esac
m4_ifdef([_AS_DETECT_SUGGESTED],
[_AS_DETECT_SUGGESTED([
test -n "${ZSH_VERSION+set}${BASH_VERSION+set}" || (
ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
PATH=/empty FPATH=/empty; export PATH FPATH
test "X`printf %s $ECHO`" = "X$ECHO" \
|| test "X`print -r -- $ECHO`" = "X$ECHO" )])])
_LT_DECL([], [SHELL], [1], [Shell to use when invoking shell scripts])
_LT_DECL([], [ECHO], [1], [An echo program that protects backslashes])
])# _LT_PROG_ECHO_BACKSLASH
# _LT_WITH_SYSROOT
# ----------------
AC_DEFUN([_LT_WITH_SYSROOT],
[AC_MSG_CHECKING([for sysroot])
AC_ARG_WITH([sysroot],
[AS_HELP_STRING([--with-sysroot@<:@=DIR@:>@],
[Search for dependent libraries within DIR (or the compiler's sysroot
if not specified).])],
[], [with_sysroot=no])
dnl lt_sysroot will always be passed unquoted. We quote it here
dnl in case the user passed a directory name.
lt_sysroot=
case $with_sysroot in #(
yes)
if test yes = "$GCC"; then
lt_sysroot=`$CC --print-sysroot 2>/dev/null`
fi
;; #(
/*)
lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"`
;; #(
no|'')
;; #(
*)
AC_MSG_RESULT([$with_sysroot])
AC_MSG_ERROR([The sysroot must be an absolute path.])
;;
esac
AC_MSG_RESULT([${lt_sysroot:-no}])
_LT_DECL([], [lt_sysroot], [0], [The root where to search for ]dnl
[dependent libraries, and where our libraries should be installed.])])
# _LT_ENABLE_LOCK
# ---------------
m4_defun([_LT_ENABLE_LOCK],
[AC_ARG_ENABLE([libtool-lock],
[AS_HELP_STRING([--disable-libtool-lock],
[avoid locking (might break parallel builds)])])
test no = "$enable_libtool_lock" || enable_libtool_lock=yes
# Some flags need to be propagated to the compiler or linker for good
# libtool support.
case $host in
ia64-*-hpux*)
# Find out what ABI is being produced by ac_compile, and set mode
# options accordingly.
echo 'int i;' > conftest.$ac_ext
if AC_TRY_EVAL(ac_compile); then
case `/usr/bin/file conftest.$ac_objext` in
*ELF-32*)
HPUX_IA64_MODE=32
;;
*ELF-64*)
HPUX_IA64_MODE=64
;;
esac
fi
rm -rf conftest*
;;
*-*-irix6*)
# Find out what ABI is being produced by ac_compile, and set linker
# options accordingly.
echo '[#]line '$LINENO' "configure"' > conftest.$ac_ext
if AC_TRY_EVAL(ac_compile); then
if test yes = "$lt_cv_prog_gnu_ld"; then
case `/usr/bin/file conftest.$ac_objext` in
*32-bit*)
LD="${LD-ld} -melf32bsmip"
;;
*N32*)
LD="${LD-ld} -melf32bmipn32"
;;
*64-bit*)
LD="${LD-ld} -melf64bmip"
;;
esac
else
case `/usr/bin/file conftest.$ac_objext` in
*32-bit*)
LD="${LD-ld} -32"
;;
*N32*)
LD="${LD-ld} -n32"
;;
*64-bit*)
LD="${LD-ld} -64"
;;
esac
fi
fi
rm -rf conftest*
;;
mips64*-*linux*)
# Find out what ABI is being produced by ac_compile, and set linker
# options accordingly.
echo '[#]line '$LINENO' "configure"' > conftest.$ac_ext
if AC_TRY_EVAL(ac_compile); then
emul=elf
case `/usr/bin/file conftest.$ac_objext` in
*32-bit*)
emul="${emul}32"
;;
*64-bit*)
emul="${emul}64"
;;
esac
case `/usr/bin/file conftest.$ac_objext` in
*MSB*)
emul="${emul}btsmip"
;;
*LSB*)
emul="${emul}ltsmip"
;;
esac
case `/usr/bin/file conftest.$ac_objext` in
*N32*)
emul="${emul}n32"
;;
esac
LD="${LD-ld} -m $emul"
fi
rm -rf conftest*
;;
x86_64-*kfreebsd*-gnu|x86_64-*linux*|powerpc*-*linux*| \
s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
# Find out what ABI is being produced by ac_compile, and set linker
# options accordingly. Note that the listed cases only cover the
# situations where additional linker options are needed (such as when
# doing 32-bit compilation for a host where ld defaults to 64-bit, or
# vice versa); the common cases where no linker options are needed do
# not appear in the list.
echo 'int i;' > conftest.$ac_ext
if AC_TRY_EVAL(ac_compile); then
case `/usr/bin/file conftest.o` in
*32-bit*)
case $host in
x86_64-*kfreebsd*-gnu)
LD="${LD-ld} -m elf_i386_fbsd"
;;
x86_64-*linux*)
case `/usr/bin/file conftest.o` in
*x86-64*)
LD="${LD-ld} -m elf32_x86_64"
;;
*)
LD="${LD-ld} -m elf_i386"
;;
esac
;;
powerpc64le-*linux*)
LD="${LD-ld} -m elf32lppclinux"
;;
powerpc64-*linux*)
LD="${LD-ld} -m elf32ppclinux"
;;
s390x-*linux*)
LD="${LD-ld} -m elf_s390"
;;
sparc64-*linux*)
LD="${LD-ld} -m elf32_sparc"
;;
esac
;;
*64-bit*)
case $host in
x86_64-*kfreebsd*-gnu)
LD="${LD-ld} -m elf_x86_64_fbsd"
;;
x86_64-*linux*)
LD="${LD-ld} -m elf_x86_64"
;;
powerpcle-*linux*)
LD="${LD-ld} -m elf64lppc"
;;
powerpc-*linux*)
LD="${LD-ld} -m elf64ppc"
;;
s390*-*linux*|s390*-*tpf*)
LD="${LD-ld} -m elf64_s390"
;;
sparc*-*linux*)
LD="${LD-ld} -m elf64_sparc"
;;
esac
;;
esac
fi
rm -rf conftest*
;;
*-*-sco3.2v5*)
# On SCO OpenServer 5, we need -belf to get full-featured binaries.
SAVE_CFLAGS=$CFLAGS
CFLAGS="$CFLAGS -belf"
AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
[AC_LANG_PUSH(C)
AC_LINK_IFELSE([AC_LANG_PROGRAM([[]],[[]])],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
AC_LANG_POP])
if test yes != "$lt_cv_cc_needs_belf"; then
# this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
CFLAGS=$SAVE_CFLAGS
fi
;;
*-*solaris*)
# Find out what ABI is being produced by ac_compile, and set linker
# options accordingly.
echo 'int i;' > conftest.$ac_ext
if AC_TRY_EVAL(ac_compile); then
case `/usr/bin/file conftest.o` in
*64-bit*)
case $lt_cv_prog_gnu_ld in
yes*)
case $host in
i?86-*-solaris*|x86_64-*-solaris*)
LD="${LD-ld} -m elf_x86_64"
;;
sparc*-*-solaris*)
LD="${LD-ld} -m elf64_sparc"
;;
esac
# GNU ld 2.21 introduced _sol2 emulations. Use them if available.
if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then
LD=${LD-ld}_sol2
fi
;;
*)
if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
LD="${LD-ld} -64"
fi
;;
esac
;;
esac
fi
rm -rf conftest*
;;
esac
need_locks=$enable_libtool_lock
])# _LT_ENABLE_LOCK
# _LT_PROG_AR
# -----------
m4_defun([_LT_PROG_AR],
[AC_CHECK_TOOLS(AR, [ar], false)
: ${AR=ar}
: ${AR_FLAGS=cru}
_LT_DECL([], [AR], [1], [The archiver])
_LT_DECL([], [AR_FLAGS], [1], [Flags to create an archive])
AC_CACHE_CHECK([for archiver @FILE support], [lt_cv_ar_at_file],
[lt_cv_ar_at_file=no
AC_COMPILE_IFELSE([AC_LANG_PROGRAM],
[echo conftest.$ac_objext > conftest.lst
lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&AS_MESSAGE_LOG_FD'
AC_TRY_EVAL([lt_ar_try])
if test 0 -eq "$ac_status"; then
# Ensure the archiver fails upon bogus file names.
rm -f conftest.$ac_objext libconftest.a
AC_TRY_EVAL([lt_ar_try])
if test 0 -ne "$ac_status"; then
lt_cv_ar_at_file=@
fi
fi
rm -f conftest.* libconftest.a
])
])
if test no = "$lt_cv_ar_at_file"; then
archiver_list_spec=
else
archiver_list_spec=$lt_cv_ar_at_file
fi
_LT_DECL([], [archiver_list_spec], [1],
[How to feed a file listing to the archiver])
])# _LT_PROG_AR
# _LT_CMD_OLD_ARCHIVE
# -------------------
m4_defun([_LT_CMD_OLD_ARCHIVE],
[_LT_PROG_AR
AC_CHECK_TOOL(STRIP, strip, :)
test -z "$STRIP" && STRIP=:
_LT_DECL([], [STRIP], [1], [A symbol stripping program])
AC_CHECK_TOOL(RANLIB, ranlib, :)
test -z "$RANLIB" && RANLIB=:
_LT_DECL([], [RANLIB], [1],
[Commands used to install an old-style archive])
# Determine commands to create old-style static archives.
old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
old_postinstall_cmds='chmod 644 $oldlib'
old_postuninstall_cmds=
if test -n "$RANLIB"; then
case $host_os in
bitrig* | openbsd*)
old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib"
;;
*)
old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$tool_oldlib"
;;
esac
old_archive_cmds="$old_archive_cmds~\$RANLIB \$tool_oldlib"
fi
case $host_os in
darwin*)
lock_old_archive_extraction=yes ;;
*)
lock_old_archive_extraction=no ;;
esac
_LT_DECL([], [old_postinstall_cmds], [2])
_LT_DECL([], [old_postuninstall_cmds], [2])
_LT_TAGDECL([], [old_archive_cmds], [2],
[Commands used to build an old-style archive])
_LT_DECL([], [lock_old_archive_extraction], [0],
[Whether to use a lock for old archive extraction])
])# _LT_CMD_OLD_ARCHIVE
# _LT_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
# [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE])
# ----------------------------------------------------------------
# Check whether the given compiler option works
AC_DEFUN([_LT_COMPILER_OPTION],
[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
m4_require([_LT_DECL_SED])dnl
AC_CACHE_CHECK([$1], [$2],
[$2=no
m4_if([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4])
echo "$lt_simple_compile_test_code" > conftest.$ac_ext
lt_compiler_flag="$3" ## exclude from sc_useless_quotes_in_assignment
# Insert the option either (1) after the last *FLAGS variable, or
# (2) before a word containing "conftest.", or (3) at the end.
# Note that $ac_compile itself does not contain backslashes and begins
# with a dollar sign (not a hyphen), so the echo should work correctly.
# The option is referenced via a variable to avoid confusing sed.
lt_compile=`echo "$ac_compile" | $SED \
-e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
(eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
(eval "$lt_compile" 2>conftest.err)
ac_status=$?
cat conftest.err >&AS_MESSAGE_LOG_FD
echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
if (exit $ac_status) && test -s "$ac_outfile"; then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings other than the usual output.
$ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
$SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
$2=yes
fi
fi
$RM conftest*
])
if test yes = "[$]$2"; then
m4_if([$5], , :, [$5])
else
m4_if([$6], , :, [$6])
fi
])# _LT_COMPILER_OPTION
# Old name:
AU_ALIAS([AC_LIBTOOL_COMPILER_OPTION], [_LT_COMPILER_OPTION])
dnl aclocal-1.4 backwards compatibility:
dnl AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], [])
# _LT_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
# [ACTION-SUCCESS], [ACTION-FAILURE])
# ----------------------------------------------------
# Check whether the given linker option works
AC_DEFUN([_LT_LINKER_OPTION],
[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
m4_require([_LT_DECL_SED])dnl
AC_CACHE_CHECK([$1], [$2],
[$2=no
save_LDFLAGS=$LDFLAGS
LDFLAGS="$LDFLAGS $3"
echo "$lt_simple_link_test_code" > conftest.$ac_ext
if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
# The linker can only warn and ignore the option if not recognized
# So say no if there are warnings
if test -s conftest.err; then
# Append any errors to the config.log.
cat conftest.err 1>&AS_MESSAGE_LOG_FD
$ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
$SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
if diff conftest.exp conftest.er2 >/dev/null; then
$2=yes
fi
else
$2=yes
fi
fi
$RM -r conftest*
LDFLAGS=$save_LDFLAGS
])
if test yes = "[$]$2"; then
m4_if([$4], , :, [$4])
else
m4_if([$5], , :, [$5])
fi
])# _LT_LINKER_OPTION
# Old name:
AU_ALIAS([AC_LIBTOOL_LINKER_OPTION], [_LT_LINKER_OPTION])
dnl aclocal-1.4 backwards compatibility:
dnl AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], [])
# LT_CMD_MAX_LEN
#---------------
AC_DEFUN([LT_CMD_MAX_LEN],
[AC_REQUIRE([AC_CANONICAL_HOST])dnl
# find the maximum length of command line arguments
AC_MSG_CHECKING([the maximum length of command line arguments])
AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
i=0
teststring=ABCD
case $build_os in
msdosdjgpp*)
# On DJGPP, this test can blow up pretty badly due to problems in libc
# (any single argument exceeding 2000 bytes causes a buffer overrun
# during glob expansion). Even if it were fixed, the result of this
# check would be larger than it should be.
lt_cv_sys_max_cmd_len=12288; # 12K is about right
;;
gnu*)
# Under GNU Hurd, this test is not required because there is
# no limit to the length of command line arguments.
# Libtool will interpret -1 as no limit whatsoever
lt_cv_sys_max_cmd_len=-1;
;;
cygwin* | mingw* | cegcc*)
# On Win9x/ME, this test blows up -- it succeeds, but takes
# about 5 minutes as the teststring grows exponentially.
# Worse, since 9x/ME are not pre-emptively multitasking,
# you end up with a "frozen" computer, even though with patience
# the test eventually succeeds (with a max line length of 256k).
# Instead, let's just punt: use the minimum linelength reported by
# all of the supported platforms: 8192 (on NT/2K/XP).
lt_cv_sys_max_cmd_len=8192;
;;
mint*)
# On MiNT this can take a long time and run out of memory.
lt_cv_sys_max_cmd_len=8192;
;;
amigaos*)
# On AmigaOS with pdksh, this test takes hours, literally.
# So we just punt and use a minimum line length of 8192.
lt_cv_sys_max_cmd_len=8192;
;;
bitrig* | darwin* | dragonfly* | freebsd* | netbsd* | openbsd*)
# This has been around since 386BSD, at least. Likely further.
if test -x /sbin/sysctl; then
lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
elif test -x /usr/sbin/sysctl; then
lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
else
lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs
fi
# And add a safety zone
lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
;;
interix*)
# We know the value 262144 and hardcode it with a safety zone (like BSD)
lt_cv_sys_max_cmd_len=196608
;;
os2*)
# The test takes a long time on OS/2.
lt_cv_sys_max_cmd_len=8192
;;
osf*)
# Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
# due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
# nice to cause kernel panics so lets avoid the loop below.
# First set a reasonable default.
lt_cv_sys_max_cmd_len=16384
#
if test -x /sbin/sysconfig; then
case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
*1*) lt_cv_sys_max_cmd_len=-1 ;;
esac
fi
;;
sco3.2v5*)
lt_cv_sys_max_cmd_len=102400
;;
sysv5* | sco5v6* | sysv4.2uw2*)
kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
if test -n "$kargmax"; then
lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ ]]//'`
else
lt_cv_sys_max_cmd_len=32768
fi
;;
*)
lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
if test -n "$lt_cv_sys_max_cmd_len" && \
test undefined != "$lt_cv_sys_max_cmd_len"; then
lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
else
# Make teststring a little bigger before we do anything with it.
# a 1K string should be a reasonable start.
for i in 1 2 3 4 5 6 7 8; do
teststring=$teststring$teststring
done
SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
# If test is not a shell built-in, we'll probably end up computing a
# maximum length that is only half of the actual maximum length, but
# we can't tell.
while { test X`env echo "$teststring$teststring" 2>/dev/null` \
= "X$teststring$teststring"; } >/dev/null 2>&1 &&
test 17 != "$i" # 1/2 MB should be enough
do
i=`expr $i + 1`
teststring=$teststring$teststring
done
# Only check the string length outside the loop.
lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1`
teststring=
# Add a significant safety factor because C++ compilers can tack on
# massive amounts of additional arguments before passing them to the
# linker. It appears as though 1/2 is a usable value.
lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
fi
;;
esac
])
if test -n "$lt_cv_sys_max_cmd_len"; then
AC_MSG_RESULT($lt_cv_sys_max_cmd_len)
else
AC_MSG_RESULT(none)
fi
max_cmd_len=$lt_cv_sys_max_cmd_len
_LT_DECL([], [max_cmd_len], [0],
[What is the maximum length of a command?])
])# LT_CMD_MAX_LEN
# Old name:
AU_ALIAS([AC_LIBTOOL_SYS_MAX_CMD_LEN], [LT_CMD_MAX_LEN])
dnl aclocal-1.4 backwards compatibility:
dnl AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], [])
# _LT_HEADER_DLFCN
# ----------------
m4_defun([_LT_HEADER_DLFCN],
[AC_CHECK_HEADERS([dlfcn.h], [], [], [AC_INCLUDES_DEFAULT])dnl
])# _LT_HEADER_DLFCN
# _LT_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
# ----------------------------------------------------------------
m4_defun([_LT_TRY_DLOPEN_SELF],
[m4_require([_LT_HEADER_DLFCN])dnl
if test yes = "$cross_compiling"; then :
[$4]
else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
[#line $LINENO "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
#include <dlfcn.h>
#endif
#include <stdio.h>
#ifdef RTLD_GLOBAL
# define LT_DLGLOBAL RTLD_GLOBAL
#else
# ifdef DL_GLOBAL
# define LT_DLGLOBAL DL_GLOBAL
# else
# define LT_DLGLOBAL 0
# endif
#endif
/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
find out it does not work in some platform. */
#ifndef LT_DLLAZY_OR_NOW
# ifdef RTLD_LAZY
# define LT_DLLAZY_OR_NOW RTLD_LAZY
# else
# ifdef DL_LAZY
# define LT_DLLAZY_OR_NOW DL_LAZY
# else
# ifdef RTLD_NOW
# define LT_DLLAZY_OR_NOW RTLD_NOW
# else
# ifdef DL_NOW
# define LT_DLLAZY_OR_NOW DL_NOW
# else
# define LT_DLLAZY_OR_NOW 0
# endif
# endif
# endif
# endif
#endif
/* When -fvisibility=hidden is used, assume the code has been annotated
correspondingly for the symbols needed. */
#if defined __GNUC__ && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
int fnord () __attribute__((visibility("default")));
#endif
int fnord () { return 42; }
int main ()
{
void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
int status = $lt_dlunknown;
if (self)
{
if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
else
{
if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
else puts (dlerror ());
}
/* dlclose (self); */
}
else
puts (dlerror ());
return status;
}]
_LT_EOF
if AC_TRY_EVAL(ac_link) && test -s "conftest$ac_exeext" 2>/dev/null; then
(./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null
lt_status=$?
case x$lt_status in
x$lt_dlno_uscore) $1 ;;
x$lt_dlneed_uscore) $2 ;;
x$lt_dlunknown|x*) $3 ;;
esac
else :
# compilation failed
$3
fi
fi
rm -fr conftest*
])# _LT_TRY_DLOPEN_SELF
# LT_SYS_DLOPEN_SELF
# ------------------
AC_DEFUN([LT_SYS_DLOPEN_SELF],
[m4_require([_LT_HEADER_DLFCN])dnl
if test yes != "$enable_dlopen"; then
enable_dlopen=unknown
enable_dlopen_self=unknown
enable_dlopen_self_static=unknown
else
lt_cv_dlopen=no
lt_cv_dlopen_libs=
case $host_os in
beos*)
lt_cv_dlopen=load_add_on
lt_cv_dlopen_libs=
lt_cv_dlopen_self=yes
;;
mingw* | pw32* | cegcc*)
lt_cv_dlopen=LoadLibrary
lt_cv_dlopen_libs=
;;
cygwin*)
lt_cv_dlopen=dlopen
lt_cv_dlopen_libs=
;;
darwin*)
# if libdl is installed we need to link against it
AC_CHECK_LIB([dl], [dlopen],
[lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl],[
lt_cv_dlopen=dyld
lt_cv_dlopen_libs=
lt_cv_dlopen_self=yes
])
;;
tpf*)
# Don't try to run any link tests for TPF. We know it's impossible
# because TPF is a cross-compiler, and we know how we open DSOs.
lt_cv_dlopen=dlopen
lt_cv_dlopen_libs=
lt_cv_dlopen_self=no
;;
*)
AC_CHECK_FUNC([shl_load],
[lt_cv_dlopen=shl_load],
[AC_CHECK_LIB([dld], [shl_load],
[lt_cv_dlopen=shl_load lt_cv_dlopen_libs=-ldld],
[AC_CHECK_FUNC([dlopen],
[lt_cv_dlopen=dlopen],
[AC_CHECK_LIB([dl], [dlopen],
[lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl],
[AC_CHECK_LIB([svld], [dlopen],
[lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-lsvld],
[AC_CHECK_LIB([dld], [dld_link],
[lt_cv_dlopen=dld_link lt_cv_dlopen_libs=-ldld])
])
])
])
])
])
;;
esac
if test no = "$lt_cv_dlopen"; then
enable_dlopen=no
else
enable_dlopen=yes
fi
case $lt_cv_dlopen in
dlopen)
save_CPPFLAGS=$CPPFLAGS
test yes = "$ac_cv_header_dlfcn_h" && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
save_LDFLAGS=$LDFLAGS
wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
save_LIBS=$LIBS
LIBS="$lt_cv_dlopen_libs $LIBS"
AC_CACHE_CHECK([whether a program can dlopen itself],
lt_cv_dlopen_self, [dnl
_LT_TRY_DLOPEN_SELF(
lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes,
lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross)
])
if test yes = "$lt_cv_dlopen_self"; then
wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
AC_CACHE_CHECK([whether a statically linked program can dlopen itself],
lt_cv_dlopen_self_static, [dnl
_LT_TRY_DLOPEN_SELF(
lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes,
lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross)
])
fi
CPPFLAGS=$save_CPPFLAGS
LDFLAGS=$save_LDFLAGS
LIBS=$save_LIBS
;;
esac
case $lt_cv_dlopen_self in
yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
*) enable_dlopen_self=unknown ;;
esac
case $lt_cv_dlopen_self_static in
yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
*) enable_dlopen_self_static=unknown ;;
esac
fi
_LT_DECL([dlopen_support], [enable_dlopen], [0],
[Whether dlopen is supported])
_LT_DECL([dlopen_self], [enable_dlopen_self], [0],
[Whether dlopen of programs is supported])
_LT_DECL([dlopen_self_static], [enable_dlopen_self_static], [0],
[Whether dlopen of statically linked programs is supported])
])# LT_SYS_DLOPEN_SELF
# Old name:
AU_ALIAS([AC_LIBTOOL_DLOPEN_SELF], [LT_SYS_DLOPEN_SELF])
dnl aclocal-1.4 backwards compatibility:
dnl AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], [])
# _LT_COMPILER_C_O([TAGNAME])
# ---------------------------
# Check to see if options -c and -o are simultaneously supported by compiler.
# This macro does not hard code the compiler like AC_PROG_CC_C_O.
m4_defun([_LT_COMPILER_C_O],
[m4_require([_LT_DECL_SED])dnl
m4_require([_LT_FILEUTILS_DEFAULTS])dnl
m4_require([_LT_TAG_COMPILER])dnl
AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext],
[_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)],
[_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no
$RM -r conftest 2>/dev/null
mkdir conftest
cd conftest
mkdir out
echo "$lt_simple_compile_test_code" > conftest.$ac_ext
lt_compiler_flag="-o out/conftest2.$ac_objext"
# Insert the option either (1) after the last *FLAGS variable, or
# (2) before a word containing "conftest.", or (3) at the end.
# Note that $ac_compile itself does not contain backslashes and begins
# with a dollar sign (not a hyphen), so the echo should work correctly.
lt_compile=`echo "$ac_compile" | $SED \
-e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
(eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
(eval "$lt_compile" 2>out/conftest.err)
ac_status=$?
cat out/conftest.err >&AS_MESSAGE_LOG_FD
echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
if (exit $ac_status) && test -s out/conftest2.$ac_objext
then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings
$ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
$SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
fi
fi
chmod u+w . 2>&AS_MESSAGE_LOG_FD
$RM conftest*
# SGI C++ compiler will create directory out/ii_files/ for
# template instantiation
test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
$RM out/* && rmdir out
cd ..
$RM -r conftest
$RM conftest*
])
_LT_TAGDECL([compiler_c_o], [lt_cv_prog_compiler_c_o], [1],
[Does compiler simultaneously support -c and -o options?])
])# _LT_COMPILER_C_O
# _LT_COMPILER_FILE_LOCKS([TAGNAME])
# ----------------------------------
# Check to see if we can do hard links to lock some files if needed
m4_defun([_LT_COMPILER_FILE_LOCKS],
[m4_require([_LT_ENABLE_LOCK])dnl
m4_require([_LT_FILEUTILS_DEFAULTS])dnl
_LT_COMPILER_C_O([$1])
hard_links=nottested
if test no = "$_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)" && test no != "$need_locks"; then
# do not overwrite the value of need_locks provided by the user
AC_MSG_CHECKING([if we can lock with hard links])
hard_links=yes
$RM conftest*
ln conftest.a conftest.b 2>/dev/null && hard_links=no
touch conftest.a
ln conftest.a conftest.b 2>&5 || hard_links=no
ln conftest.a conftest.b 2>/dev/null && hard_links=no
AC_MSG_RESULT([$hard_links])
if test no = "$hard_links"; then
AC_MSG_WARN(['$CC' does not support '-c -o', so 'make -j' may be unsafe])
need_locks=warn
fi
else
need_locks=no
fi
_LT_DECL([], [need_locks], [1], [Must we lock files when doing compilation?])
])# _LT_COMPILER_FILE_LOCKS
# _LT_CHECK_OBJDIR
# ----------------
m4_defun([_LT_CHECK_OBJDIR],
[AC_CACHE_CHECK([for objdir], [lt_cv_objdir],
[rm -f .libs 2>/dev/null
mkdir .libs 2>/dev/null
if test -d .libs; then
lt_cv_objdir=.libs
else
# MS-DOS does not allow filenames that begin with a dot.
lt_cv_objdir=_libs
fi
rmdir .libs 2>/dev/null])
objdir=$lt_cv_objdir
_LT_DECL([], [objdir], [0],
[The name of the directory that contains temporary libtool files])dnl
m4_pattern_allow([LT_OBJDIR])dnl
AC_DEFINE_UNQUOTED([LT_OBJDIR], "$lt_cv_objdir/",
[Define to the sub-directory where libtool stores uninstalled libraries.])
])# _LT_CHECK_OBJDIR
# _LT_LINKER_HARDCODE_LIBPATH([TAGNAME])
# --------------------------------------
# Check hardcoding attributes.
m4_defun([_LT_LINKER_HARDCODE_LIBPATH],
[AC_MSG_CHECKING([how to hardcode library paths into programs])
_LT_TAGVAR(hardcode_action, $1)=
if test -n "$_LT_TAGVAR(hardcode_libdir_flag_spec, $1)" ||
test -n "$_LT_TAGVAR(runpath_var, $1)" ||
test yes = "$_LT_TAGVAR(hardcode_automatic, $1)"; then
# We can hardcode non-existent directories.
if test no != "$_LT_TAGVAR(hardcode_direct, $1)" &&
# If the only mechanism to avoid hardcoding is shlibpath_var, we
# have to relink, otherwise we might link with an installed library
# when we should be linking with a yet-to-be-installed one
## test no != "$_LT_TAGVAR(hardcode_shlibpath_var, $1)" &&
test no != "$_LT_TAGVAR(hardcode_minus_L, $1)"; then
# Linking always hardcodes the temporary library directory.
_LT_TAGVAR(hardcode_action, $1)=relink
else
# We can link without hardcoding, and we can hardcode nonexisting dirs.
_LT_TAGVAR(hardcode_action, $1)=immediate
fi
else
# We cannot hardcode anything, or else we can only hardcode existing
# directories.
_LT_TAGVAR(hardcode_action, $1)=unsupported
fi
AC_MSG_RESULT([$_LT_TAGVAR(hardcode_action, $1)])
if test relink = "$_LT_TAGVAR(hardcode_action, $1)" ||
test yes = "$_LT_TAGVAR(inherit_rpath, $1)"; then
# Fast installation is not supported
enable_fast_install=no
elif test yes = "$shlibpath_overrides_runpath" ||
test no = "$enable_shared"; then
# Fast installation is not necessary
enable_fast_install=needless
fi
_LT_TAGDECL([], [hardcode_action], [0],
[How to hardcode a shared library path into an executable])
])# _LT_LINKER_HARDCODE_LIBPATH
# _LT_CMD_STRIPLIB
# ----------------
m4_defun([_LT_CMD_STRIPLIB],
[m4_require([_LT_DECL_EGREP])
striplib=
old_striplib=
AC_MSG_CHECKING([whether stripping libraries is possible])
if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then
test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
test -z "$striplib" && striplib="$STRIP --strip-unneeded"
AC_MSG_RESULT([yes])
else
# FIXME - insert some real tests, host_os isn't really good enough
case $host_os in
darwin*)
if test -n "$STRIP"; then
striplib="$STRIP -x"
old_striplib="$STRIP -S"
AC_MSG_RESULT([yes])
else
AC_MSG_RESULT([no])
fi
;;
*)
AC_MSG_RESULT([no])
;;
esac
fi
_LT_DECL([], [old_striplib], [1], [Commands to strip libraries])
_LT_DECL([], [striplib], [1])
])# _LT_CMD_STRIPLIB
# _LT_PREPARE_MUNGE_PATH_LIST
# ---------------------------
# Make sure func_munge_path_list() is defined correctly.
m4_defun([_LT_PREPARE_MUNGE_PATH_LIST],
[[# func_munge_path_list VARIABLE PATH
# -----------------------------------
# VARIABLE is name of variable containing _space_ separated list of
# directories to be munged by the contents of PATH, which is string
# having a format:
# "DIR[:DIR]:"
# string "DIR[ DIR]" will be prepended to VARIABLE
# ":DIR[:DIR]"
# string "DIR[ DIR]" will be appended to VARIABLE
# "DIRP[:DIRP]::[DIRA:]DIRA"
# string "DIRP[ DIRP]" will be prepended to VARIABLE and string
# "DIRA[ DIRA]" will be appended to VARIABLE
# "DIR[:DIR]"
# VARIABLE will be replaced by "DIR[ DIR]"
func_munge_path_list ()
{
case x@S|@2 in
x)
;;
*:)
eval @S|@1=\"`$ECHO @S|@2 | $SED 's/:/ /g'` \@S|@@S|@1\"
;;
x:*)
eval @S|@1=\"\@S|@@S|@1 `$ECHO @S|@2 | $SED 's/:/ /g'`\"
;;
*::*)
eval @S|@1=\"\@S|@@S|@1\ `$ECHO @S|@2 | $SED -e 's/.*:://' -e 's/:/ /g'`\"
eval @S|@1=\"`$ECHO @S|@2 | $SED -e 's/::.*//' -e 's/:/ /g'`\ \@S|@@S|@1\"
;;
*)
eval @S|@1=\"`$ECHO @S|@2 | $SED 's/:/ /g'`\"
;;
esac
}
]])# _LT_PREPARE_PATH_LIST
# _LT_SYS_DYNAMIC_LINKER([TAG])
# -----------------------------
# PORTME Fill in your ld.so characteristics
m4_defun([_LT_SYS_DYNAMIC_LINKER],
[AC_REQUIRE([AC_CANONICAL_HOST])dnl
m4_require([_LT_DECL_EGREP])dnl
m4_require([_LT_FILEUTILS_DEFAULTS])dnl
m4_require([_LT_DECL_OBJDUMP])dnl
m4_require([_LT_DECL_SED])dnl
m4_require([_LT_CHECK_SHELL_FEATURES])dnl
m4_require([_LT_PREPARE_MUNGE_PATH_LIST])dnl
AC_MSG_CHECKING([dynamic linker characteristics])
m4_if([$1],
[], [
if test yes = "$GCC"; then
case $host_os in
darwin*) lt_awk_arg='/^libraries:/,/LR/' ;;
*) lt_awk_arg='/^libraries:/' ;;
esac
case $host_os in
mingw* | cegcc*) lt_sed_strip_eq='s|=\([[A-Za-z]]:\)|\1|g' ;;
*) lt_sed_strip_eq='s|=/|/|g' ;;
esac
lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq`
case $lt_search_path_spec in
*\;*)
# if the path contains ";" then we assume it to be the separator
# otherwise default to the standard path separator (i.e. ":") - it is
# assumed that no part of a normal pathname contains ";" but that should
# okay in the real world where ";" in dirpaths is itself problematic.
lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'`
;;
*)
lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"`
;;
esac
# Ok, now we have the path, separated by spaces, we can step through it
# and add multilib dir if necessary...
lt_tmp_lt_search_path_spec=
lt_multi_os_dir=/`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
# ...but if some path component already ends with the multilib dir we assume
# that all is fine and trust -print-search-dirs as is (GCC 4.2? or newer).
case "$lt_multi_os_dir; $lt_search_path_spec " in
"/; "* | "/.; "* | "/./; "* | *"$lt_multi_os_dir "* | *"$lt_multi_os_dir/ "*)
lt_multi_os_dir=
;;
esac
for lt_sys_path in $lt_search_path_spec; do
if test -d "$lt_sys_path$lt_multi_os_dir"; then
lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path$lt_multi_os_dir"
elif test -n "$lt_multi_os_dir"; then
test -d "$lt_sys_path" && \
lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
fi
done
lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk '
BEGIN {RS = " "; FS = "/|\n";} {
lt_foo = "";
lt_count = 0;
for (lt_i = NF; lt_i > 0; lt_i--) {
if ($lt_i != "" && $lt_i != ".") {
if ($lt_i == "..") {
lt_count++;
} else {
if (lt_count == 0) {
lt_foo = "/" $lt_i lt_foo;
} else {
lt_count--;
}
}
}
}
if (lt_foo != "") { lt_freq[[lt_foo]]++; }
if (lt_freq[[lt_foo]] == 1) { print lt_foo; }
}'`
# AWK program above erroneously prepends '/' to C:/dos/paths
# for these hosts.
case $host_os in
mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\
$SED 's|/\([[A-Za-z]]:\)|\1|g'` ;;
esac
sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP`
else
sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
fi])
library_names_spec=
libname_spec='lib$name'
soname_spec=
shrext_cmds=.so
postinstall_cmds=
postuninstall_cmds=
finish_cmds=
finish_eval=
shlibpath_var=
shlibpath_overrides_runpath=unknown
version_type=none
dynamic_linker="$host_os ld.so"
sys_lib_dlsearch_path_spec="/lib /usr/lib"
need_lib_prefix=unknown
hardcode_into_libs=no
# when you set need_version to no, make sure it does not cause -set_version
# flags to be left without arguments
need_version=unknown
AC_ARG_VAR([LT_SYS_LIBRARY_PATH],
[User-defined run-time library search path.])
case $host_os in
aix3*)
version_type=linux # correct to gnu/linux during the next big refactor
library_names_spec='$libname$release$shared_ext$versuffix $libname.a'
shlibpath_var=LIBPATH
# AIX 3 has no versioning support, so we append a major version to the name.
soname_spec='$libname$release$shared_ext$major'
;;
aix[[4-9]]*)
version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
hardcode_into_libs=yes
if test ia64 = "$host_cpu"; then
# AIX 5 supports IA64
library_names_spec='$libname$release$shared_ext$major $libname$release$shared_ext$versuffix $libname$shared_ext'
shlibpath_var=LD_LIBRARY_PATH
else
# With GCC up to 2.95.x, collect2 would create an import file
# for dependence libraries. The import file would start with
# the line '#! .'. This would cause the generated library to
# depend on '.', always an invalid library. This was fixed in
# development snapshots of GCC prior to 3.0.
case $host_os in
aix4 | aix4.[[01]] | aix4.[[01]].*)
if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
echo ' yes '
echo '#endif'; } | $CC -E - | $GREP yes > /dev/null; then
:
else
can_build_shared=no
fi
;;
esac
# Using Import Files as archive members, it is possible to support
# filename-based versioning of shared library archives on AIX. While
# this would work for both with and without runtime linking, it will
# prevent static linking of such archives. So we do filename-based
# shared library versioning with .so extension only, which is used
# when both runtime linking and shared linking is enabled.
# Unfortunately, runtime linking may impact performance, so we do
# not want this to be the default eventually. Also, we use the
# versioned .so libs for executables only if there is the -brtl
# linker flag in LDFLAGS as well, or --with-aix-soname=svr4 only.
# To allow for filename-based versioning support, we need to create
# libNAME.so.V as an archive file, containing:
# *) an Import File, referring to the versioned filename of the
# archive as well as the shared archive member, telling the
# bitwidth (32 or 64) of that shared object, and providing the
# list of exported symbols of that shared object, eventually
# decorated with the 'weak' keyword
# *) the shared object with the F_LOADONLY flag set, to really avoid
# it being seen by the linker.
# At run time we better use the real file rather than another symlink,
# but for link time we create the symlink libNAME.so -> libNAME.so.V
case $with_aix_soname,$aix_use_runtimelinking in
# AIX (on Power*) has no versioning support, so currently we cannot hardcode correct
# soname into executable. Probably we can add versioning support to
# collect2, so additional links can be useful in future.
aix,yes) # traditional libtool
dynamic_linker='AIX unversionable lib.so'
# If using run time linking (on AIX 4.2 or later) use lib<name>.so
# instead of lib<name>.a to let people know that these are not
# typical AIX shared libraries.
library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
;;
aix,no) # traditional AIX only
dynamic_linker='AIX lib.a[(]lib.so.V[)]'
# We preserve .a as extension for shared libraries through AIX4.2
# and later when we are not doing run time linking.
library_names_spec='$libname$release.a $libname.a'
soname_spec='$libname$release$shared_ext$major'
;;
svr4,*) # full svr4 only
dynamic_linker="AIX lib.so.V[(]$shared_archive_member_spec.o[)]"
library_names_spec='$libname$release$shared_ext$major $libname$shared_ext'
# We do not specify a path in Import Files, so LIBPATH fires.
shlibpath_overrides_runpath=yes
;;
*,yes) # both, prefer svr4
dynamic_linker="AIX lib.so.V[(]$shared_archive_member_spec.o[)], lib.a[(]lib.so.V[)]"
library_names_spec='$libname$release$shared_ext$major $libname$shared_ext'
# unpreferred sharedlib libNAME.a needs extra handling
postinstall_cmds='test -n "$linkname" || linkname="$realname"~func_stripname "" ".so" "$linkname"~$install_shared_prog "$dir/$func_stripname_result.$libext" "$destdir/$func_stripname_result.$libext"~test -z "$tstripme" || test -z "$striplib" || $striplib "$destdir/$func_stripname_result.$libext"'
postuninstall_cmds='for n in $library_names $old_library; do :; done~func_stripname "" ".so" "$n"~test "$func_stripname_result" = "$n" || func_append rmfiles " $odir/$func_stripname_result.$libext"'
# We do not specify a path in Import Files, so LIBPATH fires.
shlibpath_overrides_runpath=yes
;;
*,no) # both, prefer aix
dynamic_linker="AIX lib.a[(]lib.so.V[)], lib.so.V[(]$shared_archive_member_spec.o[)]"
library_names_spec='$libname$release.a $libname.a'
soname_spec='$libname$release$shared_ext$major'
# unpreferred sharedlib libNAME.so.V and symlink libNAME.so need extra handling
postinstall_cmds='test -z "$dlname" || $install_shared_prog $dir/$dlname $destdir/$dlname~test -z "$tstripme" || test -z "$striplib" || $striplib $destdir/$dlname~test -n "$linkname" || linkname=$realname~func_stripname "" ".a" "$linkname"~(cd "$destdir" && $LN_S -f $dlname $func_stripname_result.so)'
postuninstall_cmds='test -z "$dlname" || func_append rmfiles " $odir/$dlname"~for n in $old_library $library_names; do :; done~func_stripname "" ".a" "$n"~func_append rmfiles " $odir/$func_stripname_result.so"'
;;
esac
shlibpath_var=LIBPATH
fi
;;
amigaos*)
case $host_cpu in
powerpc)
# Since July 2007 AmigaOS4 officially supports .so libraries.
# When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
;;
m68k)
library_names_spec='$libname.ixlibrary $libname.a'
# Create ${libname}_ixlibrary.a entries in /sys/libs.
finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
;;
esac
;;
beos*)
library_names_spec='$libname$shared_ext'
dynamic_linker="$host_os ld.so"
shlibpath_var=LIBRARY_PATH
;;
bsdi[[45]]*)
version_type=linux # correct to gnu/linux during the next big refactor
need_version=no
library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
soname_spec='$libname$release$shared_ext$major'
finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
shlibpath_var=LD_LIBRARY_PATH
sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
# the default ld.so.conf also contains /usr/contrib/lib and
# /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
# libtool to hard-code these into programs
;;
cygwin* | mingw* | pw32* | cegcc*)
version_type=windows
shrext_cmds=.dll
need_version=no
need_lib_prefix=no
case $GCC,$cc_basename in
yes,*)
# gcc
library_names_spec='$libname.dll.a'
# DLL is installed to $(libdir)/../bin by postinstall_cmds
postinstall_cmds='base_file=`basename \$file`~
dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~
dldir=$destdir/`dirname \$dlpath`~
test -d \$dldir || mkdir -p \$dldir~
$install_prog $dir/$dlname \$dldir/$dlname~
chmod a+x \$dldir/$dlname~
if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
fi'
postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
dlpath=$dir/\$dldll~
$RM \$dlpath'
shlibpath_overrides_runpath=yes
case $host_os in
cygwin*)
# Cygwin DLLs use 'cyg' prefix rather than 'lib'
soname_spec='`echo $libname | sed -e 's/^lib/cyg/'``echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext'
m4_if([$1], [],[
sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"])
;;
mingw* | cegcc*)
# MinGW DLLs use traditional 'lib' prefix
soname_spec='$libname`echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext'
;;
pw32*)
# pw32 DLLs use 'pw' prefix rather than 'lib'
library_names_spec='`echo $libname | sed -e 's/^lib/pw/'``echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext'
;;
esac
dynamic_linker='Win32 ld.exe'
;;
*,cl*)
# Native MSVC
libname_spec='$name'
soname_spec='$libname`echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext'
library_names_spec='$libname.dll.lib'
case $build_os in
mingw*)
sys_lib_search_path_spec=
lt_save_ifs=$IFS
IFS=';'
for lt_path in $LIB
do
IFS=$lt_save_ifs
# Let DOS variable expansion print the short 8.3 style file name.
lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"`
sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path"
done
IFS=$lt_save_ifs
# Convert to MSYS style.
sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([[a-zA-Z]]\\):| /\\1|g' -e 's|^ ||'`
;;
cygwin*)
# Convert to unix form, then to dos form, then back to unix form
# but this time dos style (no spaces!) so that the unix form looks
# like /cygdrive/c/PROGRA~1:/cygdr...
sys_lib_search_path_spec=`cygpath --path --unix "$LIB"`
sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null`
sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
;;
*)
sys_lib_search_path_spec=$LIB
if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then
# It is most probably a Windows format PATH.
sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
else
sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
fi
# FIXME: find the short name or the path components, as spaces are
# common. (e.g. "Program Files" -> "PROGRA~1")
;;
esac
# DLL is installed to $(libdir)/../bin by postinstall_cmds
postinstall_cmds='base_file=`basename \$file`~
dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~
dldir=$destdir/`dirname \$dlpath`~
test -d \$dldir || mkdir -p \$dldir~
$install_prog $dir/$dlname \$dldir/$dlname'
postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
dlpath=$dir/\$dldll~
$RM \$dlpath'
shlibpath_overrides_runpath=yes
dynamic_linker='Win32 link.exe'
;;
*)
# Assume MSVC wrapper
library_names_spec='$libname`echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext $libname.lib'
dynamic_linker='Win32 ld.exe'
;;
esac
# FIXME: first we should search . and the directory the executable is in
shlibpath_var=PATH
;;
darwin* | rhapsody*)
dynamic_linker="$host_os dyld"
version_type=darwin
need_lib_prefix=no
need_version=no
library_names_spec='$libname$release$major$shared_ext $libname$shared_ext'
soname_spec='$libname$release$major$shared_ext'
shlibpath_overrides_runpath=yes
shlibpath_var=DYLD_LIBRARY_PATH
shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
m4_if([$1], [],[
sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"])
sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
;;
dgux*)
version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
soname_spec='$libname$release$shared_ext$major'
shlibpath_var=LD_LIBRARY_PATH
;;
freebsd* | dragonfly*)
# DragonFly does not have aout. When/if they implement a new
# versioning mechanism, adjust this.
if test -x /usr/bin/objformat; then
objformat=`/usr/bin/objformat`
else
case $host_os in
freebsd[[23]].*) objformat=aout ;;
*) objformat=elf ;;
esac
fi
version_type=freebsd-$objformat
case $version_type in
freebsd-elf*)
library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
soname_spec='$libname$release$shared_ext$major'
need_version=no
need_lib_prefix=no
;;
freebsd-*)
library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
need_version=yes
;;
esac
shlibpath_var=LD_LIBRARY_PATH
case $host_os in
freebsd2.*)
shlibpath_overrides_runpath=yes
;;
freebsd3.[[01]]* | freebsdelf3.[[01]]*)
shlibpath_overrides_runpath=yes
hardcode_into_libs=yes
;;
freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \
freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1)
shlibpath_overrides_runpath=no
hardcode_into_libs=yes
;;
*) # from 4.6 on, and DragonFly
shlibpath_overrides_runpath=yes
hardcode_into_libs=yes
;;
esac
;;
haiku*)
version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
dynamic_linker="$host_os runtime_loader"
library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
soname_spec='$libname$release$shared_ext$major'
shlibpath_var=LIBRARY_PATH
shlibpath_overrides_runpath=no
sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
hardcode_into_libs=yes
;;
hpux9* | hpux10* | hpux11*)
# Give a soname corresponding to the major version so that dld.sl refuses to
# link against other versions.
version_type=sunos
need_lib_prefix=no
need_version=no
case $host_cpu in
ia64*)
shrext_cmds='.so'
hardcode_into_libs=yes
dynamic_linker="$host_os dld.so"
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
soname_spec='$libname$release$shared_ext$major'
if test 32 = "$HPUX_IA64_MODE"; then
sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
sys_lib_dlsearch_path_spec=/usr/lib/hpux32
else
sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
sys_lib_dlsearch_path_spec=/usr/lib/hpux64
fi
;;
hppa*64*)
shrext_cmds='.sl'
hardcode_into_libs=yes
dynamic_linker="$host_os dld.sl"
shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
soname_spec='$libname$release$shared_ext$major'
sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
;;
*)
shrext_cmds='.sl'
dynamic_linker="$host_os dld.sl"
shlibpath_var=SHLIB_PATH
shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
soname_spec='$libname$release$shared_ext$major'
;;
esac
# HP-UX runs *really* slowly unless shared libraries are mode 555, ...
postinstall_cmds='chmod 555 $lib'
# or fails outright, so override atomically:
install_override_mode=555
;;
interix[[3-9]]*)
version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
soname_spec='$libname$release$shared_ext$major'
dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=no
hardcode_into_libs=yes
;;
irix5* | irix6* | nonstopux*)
case $host_os in
nonstopux*) version_type=nonstopux ;;
*)
if test yes = "$lt_cv_prog_gnu_ld"; then
version_type=linux # correct to gnu/linux during the next big refactor
else
version_type=irix
fi ;;
esac
need_lib_prefix=no
need_version=no
soname_spec='$libname$release$shared_ext$major'
library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$release$shared_ext $libname$shared_ext'
case $host_os in
irix5* | nonstopux*)
libsuff= shlibsuff=
;;
*)
case $LD in # libtool.m4 will add one of these switches to LD
*-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
libsuff= shlibsuff= libmagic=32-bit;;
*-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
libsuff=32 shlibsuff=N32 libmagic=N32;;
*-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
libsuff=64 shlibsuff=64 libmagic=64-bit;;
*) libsuff= shlibsuff= libmagic=never-match;;
esac
;;
esac
shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
shlibpath_overrides_runpath=no
sys_lib_search_path_spec="/usr/lib$libsuff /lib$libsuff /usr/local/lib$libsuff"
sys_lib_dlsearch_path_spec="/usr/lib$libsuff /lib$libsuff"
hardcode_into_libs=yes
;;
# No shared lib support for Linux oldld, aout, or coff.
linux*oldld* | linux*aout* | linux*coff*)
dynamic_linker=no
;;
linux*android*)
version_type=none # Android doesn't support versioned libraries.
need_lib_prefix=no
need_version=no
library_names_spec='$libname$release$shared_ext'
soname_spec='$libname$release$shared_ext'
finish_cmds=
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes
# This implies no fast_install, which is unacceptable.
# Some rework will be needed to allow for fast_install
# before this can be enabled.
hardcode_into_libs=yes
dynamic_linker='Android linker'
# Don't embed -rpath directories since the linker doesn't support them.
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
;;
# This must be glibc/ELF.
linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
soname_spec='$libname$release$shared_ext$major'
finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=no
# Some binutils ld are patched to set DT_RUNPATH
AC_CACHE_VAL([lt_cv_shlibpath_overrides_runpath],
[lt_cv_shlibpath_overrides_runpath=no
save_LDFLAGS=$LDFLAGS
save_libdir=$libdir
eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \
LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\""
AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
[AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null],
[lt_cv_shlibpath_overrides_runpath=yes])])
LDFLAGS=$save_LDFLAGS
libdir=$save_libdir
])
shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath
# This implies no fast_install, which is unacceptable.
# Some rework will be needed to allow for fast_install
# before this can be enabled.
hardcode_into_libs=yes
# Ideally, we could use ldconfig to report *all* directores which are
# searched for libraries, however this is still not possible. Aside from not
# being certain /sbin/ldconfig is available, command
# 'ldconfig -N -X -v | grep ^/' on 64bit Fedora does not report /usr/lib64,
# even though it is searched at run-time. Try to do the best guess by
# appending ld.so.conf contents (and includes) to the search path.
if test -f /etc/ld.so.conf; then
lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
fi
# We used to test for /lib/ld.so.1 and disable shared libraries on
# powerpc, because MkLinux only supported shared libraries with the
# GNU dynamic linker. Since this was broken with cross compilers,
# most powerpc-linux boxes support dynamic linking these days and
# people can always --disable-shared, the test was removed, and we
# assume the GNU/Linux dynamic linker is in use.
dynamic_linker='GNU/Linux ld.so'
;;
netbsd*)
version_type=sunos
need_lib_prefix=no
need_version=no
if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
dynamic_linker='NetBSD (a.out) ld.so'
else
library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
soname_spec='$libname$release$shared_ext$major'
dynamic_linker='NetBSD ld.elf_so'
fi
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes
hardcode_into_libs=yes
;;
newsos6)
version_type=linux # correct to gnu/linux during the next big refactor
library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes
;;
*nto* | *qnx*)
version_type=qnx
need_lib_prefix=no
need_version=no
library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
soname_spec='$libname$release$shared_ext$major'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=no
hardcode_into_libs=yes
dynamic_linker='ldqnx.so'
;;
openbsd* | bitrig*)
version_type=sunos
sys_lib_dlsearch_path_spec=/usr/lib
need_lib_prefix=no
if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then
need_version=no
else
need_version=yes
fi
library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes
;;
os2*)
libname_spec='$name'
version_type=windows
shrext_cmds=.dll
need_version=no
need_lib_prefix=no
# OS/2 can only load a DLL with a base name of 8 characters or less.
soname_spec='`test -n "$os2dllname" && libname="$os2dllname";
v=$($ECHO $release$versuffix | tr -d .-);
n=$($ECHO $libname | cut -b -$((8 - ${#v})) | tr . _);
$ECHO $n$v`$shared_ext'
library_names_spec='${libname}_dll.$libext'
dynamic_linker='OS/2 ld.exe'
shlibpath_var=BEGINLIBPATH
sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
postinstall_cmds='base_file=`basename \$file`~
dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; $ECHO \$dlname'\''`~
dldir=$destdir/`dirname \$dlpath`~
test -d \$dldir || mkdir -p \$dldir~
$install_prog $dir/$dlname \$dldir/$dlname~
chmod a+x \$dldir/$dlname~
if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
fi'
postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; $ECHO \$dlname'\''`~
dlpath=$dir/\$dldll~
$RM \$dlpath'
;;
osf3* | osf4* | osf5*)
version_type=osf
need_lib_prefix=no
need_version=no
soname_spec='$libname$release$shared_ext$major'
library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
shlibpath_var=LD_LIBRARY_PATH
sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
;;
rdos*)
dynamic_linker=no
;;
solaris*)
version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
soname_spec='$libname$release$shared_ext$major'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes
hardcode_into_libs=yes
# ldd complains unless libraries are executable
postinstall_cmds='chmod +x $lib'
;;
sunos4*)
version_type=sunos
library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes
if test yes = "$with_gnu_ld"; then
need_lib_prefix=no
fi
need_version=yes
;;
sysv4 | sysv4.3*)
version_type=linux # correct to gnu/linux during the next big refactor
library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
soname_spec='$libname$release$shared_ext$major'
shlibpath_var=LD_LIBRARY_PATH
case $host_vendor in
sni)
shlibpath_overrides_runpath=no
need_lib_prefix=no
runpath_var=LD_RUN_PATH
;;
siemens)
need_lib_prefix=no
;;
motorola)
need_lib_prefix=no
need_version=no
shlibpath_overrides_runpath=no
sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
;;
esac
;;
sysv4*MP*)
if test -d /usr/nec; then
version_type=linux # correct to gnu/linux during the next big refactor
library_names_spec='$libname$shared_ext.$versuffix $libname$shared_ext.$major $libname$shared_ext'
soname_spec='$libname$shared_ext.$major'
shlibpath_var=LD_LIBRARY_PATH
fi
;;
sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
version_type=sco
need_lib_prefix=no
need_version=no
library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext $libname$shared_ext'
soname_spec='$libname$release$shared_ext$major'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes
hardcode_into_libs=yes
if test yes = "$with_gnu_ld"; then
sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
else
sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
case $host_os in
sco3.2v5*)
sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
;;
esac
fi
sys_lib_dlsearch_path_spec='/usr/lib'
;;
tpf*)
# TPF is a cross-target only. Preferred cross-host = GNU/Linux.
version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=no
hardcode_into_libs=yes
;;
uts4*)
version_type=linux # correct to gnu/linux during the next big refactor
library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
soname_spec='$libname$release$shared_ext$major'
shlibpath_var=LD_LIBRARY_PATH
;;
*)
dynamic_linker=no
;;
esac
AC_MSG_RESULT([$dynamic_linker])
test no = "$dynamic_linker" && can_build_shared=no
variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
if test yes = "$GCC"; then
variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
fi
if test set = "${lt_cv_sys_lib_search_path_spec+set}"; then
sys_lib_search_path_spec=$lt_cv_sys_lib_search_path_spec
fi
if test set = "${lt_cv_sys_lib_dlsearch_path_spec+set}"; then
sys_lib_dlsearch_path_spec=$lt_cv_sys_lib_dlsearch_path_spec
fi
# remember unaugmented sys_lib_dlsearch_path content for libtool script decls...
configure_time_dlsearch_path=$sys_lib_dlsearch_path_spec
# ... but it needs LT_SYS_LIBRARY_PATH munging for other configure-time code
func_munge_path_list sys_lib_dlsearch_path_spec "$LT_SYS_LIBRARY_PATH"
# to be used as default LT_SYS_LIBRARY_PATH value in generated libtool
configure_time_lt_sys_library_path=$LT_SYS_LIBRARY_PATH
_LT_DECL([], [variables_saved_for_relink], [1],
[Variables whose values should be saved in libtool wrapper scripts and
restored at link time])
_LT_DECL([], [need_lib_prefix], [0],
[Do we need the "lib" prefix for modules?])
_LT_DECL([], [need_version], [0], [Do we need a version for libraries?])
_LT_DECL([], [version_type], [0], [Library versioning type])
_LT_DECL([], [runpath_var], [0], [Shared library runtime path variable])
_LT_DECL([], [shlibpath_var], [0],[Shared library path variable])
_LT_DECL([], [shlibpath_overrides_runpath], [0],
[Is shlibpath searched before the hard-coded library search path?])
_LT_DECL([], [libname_spec], [1], [Format of library name prefix])
_LT_DECL([], [library_names_spec], [1],
[[List of archive names. First name is the real one, the rest are links.
The last name is the one that the linker finds with -lNAME]])
_LT_DECL([], [soname_spec], [1],
[[The coded name of the library, if different from the real name]])
_LT_DECL([], [install_override_mode], [1],
[Permission mode override for installation of shared libraries])
_LT_DECL([], [postinstall_cmds], [2],
[Command to use after installation of a shared archive])
_LT_DECL([], [postuninstall_cmds], [2],
[Command to use after uninstallation of a shared archive])
_LT_DECL([], [finish_cmds], [2],
[Commands used to finish a libtool library installation in a directory])
_LT_DECL([], [finish_eval], [1],
[[As "finish_cmds", except a single script fragment to be evaled but
not shown]])
_LT_DECL([], [hardcode_into_libs], [0],
[Whether we should hardcode library paths into libraries])
_LT_DECL([], [sys_lib_search_path_spec], [2],
[Compile-time system search path for libraries])
_LT_DECL([sys_lib_dlsearch_path_spec], [configure_time_dlsearch_path], [2],
[Detected run-time system search path for libraries])
_LT_DECL([], [configure_time_lt_sys_library_path], [2],
[Explicit LT_SYS_LIBRARY_PATH set during ./configure time])
])# _LT_SYS_DYNAMIC_LINKER
# _LT_PATH_TOOL_PREFIX(TOOL)
# --------------------------
# find a file program that can recognize shared library
AC_DEFUN([_LT_PATH_TOOL_PREFIX],
[m4_require([_LT_DECL_EGREP])dnl
AC_MSG_CHECKING([for $1])
AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
[case $MAGIC_CMD in
[[\\/*] | ?:[\\/]*])
lt_cv_path_MAGIC_CMD=$MAGIC_CMD # Let the user override the test with a path.
;;
*)
lt_save_MAGIC_CMD=$MAGIC_CMD
lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
dnl $ac_dummy forces splitting on constant user-supplied paths.
dnl POSIX.2 word splitting is done only on the output of word expansions,
dnl not every word. This closes a longstanding sh security hole.
ac_dummy="m4_if([$2], , $PATH, [$2])"
for ac_dir in $ac_dummy; do
IFS=$lt_save_ifs
test -z "$ac_dir" && ac_dir=.
if test -f "$ac_dir/$1"; then
lt_cv_path_MAGIC_CMD=$ac_dir/"$1"
if test -n "$file_magic_test_file"; then
case $deplibs_check_method in
"file_magic "*)
file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
MAGIC_CMD=$lt_cv_path_MAGIC_CMD
if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
$EGREP "$file_magic_regex" > /dev/null; then
:
else
cat <<_LT_EOF 1>&2
*** Warning: the command libtool uses to detect shared libraries,
*** $file_magic_cmd, produces output that libtool cannot recognize.
*** The result is that libtool may fail to recognize shared libraries
*** as such. This will affect the creation of libtool libraries that
*** depend on shared libraries, but programs linked with such libtool
*** libraries will work regardless of this problem. Nevertheless, you
*** may want to report the problem to your system manager and/or to
*** bug-libtool@gnu.org
_LT_EOF
fi ;;
esac
fi
break
fi
done
IFS=$lt_save_ifs
MAGIC_CMD=$lt_save_MAGIC_CMD
;;
esac])
MAGIC_CMD=$lt_cv_path_MAGIC_CMD
if test -n "$MAGIC_CMD"; then
AC_MSG_RESULT($MAGIC_CMD)
else
AC_MSG_RESULT(no)
fi
_LT_DECL([], [MAGIC_CMD], [0],
[Used to examine libraries when file_magic_cmd begins with "file"])dnl
])# _LT_PATH_TOOL_PREFIX
# Old name:
AU_ALIAS([AC_PATH_TOOL_PREFIX], [_LT_PATH_TOOL_PREFIX])
dnl aclocal-1.4 backwards compatibility:
dnl AC_DEFUN([AC_PATH_TOOL_PREFIX], [])
# _LT_PATH_MAGIC
# --------------
# find a file program that can recognize a shared library
m4_defun([_LT_PATH_MAGIC],
[_LT_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH)
if test -z "$lt_cv_path_MAGIC_CMD"; then
if test -n "$ac_tool_prefix"; then
_LT_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH)
else
MAGIC_CMD=:
fi
fi
])# _LT_PATH_MAGIC
# LT_PATH_LD
# ----------
# find the pathname to the GNU or non-GNU linker
AC_DEFUN([LT_PATH_LD],
[AC_REQUIRE([AC_PROG_CC])dnl
AC_REQUIRE([AC_CANONICAL_HOST])dnl
AC_REQUIRE([AC_CANONICAL_BUILD])dnl
m4_require([_LT_DECL_SED])dnl
m4_require([_LT_DECL_EGREP])dnl
m4_require([_LT_PROG_ECHO_BACKSLASH])dnl
AC_ARG_WITH([gnu-ld],
[AS_HELP_STRING([--with-gnu-ld],
[assume the C compiler uses GNU ld @<:@default=no@:>@])],
[test no = "$withval" || with_gnu_ld=yes],
[with_gnu_ld=no])dnl
ac_prog=ld
if test yes = "$GCC"; then
# Check if gcc -print-prog-name=ld gives a path.
AC_MSG_CHECKING([for ld used by $CC])
case $host in
*-*-mingw*)
# gcc leaves a trailing carriage return, which upsets mingw
ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
*)
ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
esac
case $ac_prog in
# Accept absolute paths.
[[\\/]]* | ?:[[\\/]]*)
re_direlt='/[[^/]][[^/]]*/\.\./'
# Canonicalize the pathname of ld
ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
done
test -z "$LD" && LD=$ac_prog
;;
"")
# If it fails, then pretend we aren't using GCC.
ac_prog=ld
;;
*)
# If it is relative, then search for the first ld in PATH.
with_gnu_ld=unknown
;;
esac
elif test yes = "$with_gnu_ld"; then
AC_MSG_CHECKING([for GNU ld])
else
AC_MSG_CHECKING([for non-GNU ld])
fi
AC_CACHE_VAL(lt_cv_path_LD,
[if test -z "$LD"; then
lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
for ac_dir in $PATH; do
IFS=$lt_save_ifs
test -z "$ac_dir" && ac_dir=.
if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
lt_cv_path_LD=$ac_dir/$ac_prog
# Check to see if the program is GNU ld. I'd rather use --version,
# but apparently some variants of GNU ld only accept -v.
# Break only if it was the GNU/non-GNU ld that we prefer.
case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
*GNU* | *'with BFD'*)
test no != "$with_gnu_ld" && break
;;
*)
test yes != "$with_gnu_ld" && break
;;
esac
fi
done
IFS=$lt_save_ifs
else
lt_cv_path_LD=$LD # Let the user override the test with a path.
fi])
LD=$lt_cv_path_LD
if test -n "$LD"; then
AC_MSG_RESULT($LD)
else
AC_MSG_RESULT(no)
fi
test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
_LT_PATH_LD_GNU
AC_SUBST([LD])
_LT_TAGDECL([], [LD], [1], [The linker used to build libraries])
])# LT_PATH_LD
# Old names:
AU_ALIAS([AM_PROG_LD], [LT_PATH_LD])
AU_ALIAS([AC_PROG_LD], [LT_PATH_LD])
dnl aclocal-1.4 backwards compatibility:
dnl AC_DEFUN([AM_PROG_LD], [])
dnl AC_DEFUN([AC_PROG_LD], [])
# _LT_PATH_LD_GNU
#- --------------
m4_defun([_LT_PATH_LD_GNU],
[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
[# I'd rather use --version here, but apparently some GNU lds only accept -v.
case `$LD -v 2>&1 </dev/null` in
*GNU* | *'with BFD'*)
lt_cv_prog_gnu_ld=yes
;;
*)
lt_cv_prog_gnu_ld=no
;;
esac])
with_gnu_ld=$lt_cv_prog_gnu_ld
])# _LT_PATH_LD_GNU
# _LT_CMD_RELOAD
# --------------
# find reload flag for linker
# -- PORTME Some linkers may need a different reload flag.
m4_defun([_LT_CMD_RELOAD],
[AC_CACHE_CHECK([for $LD option to reload object files],
lt_cv_ld_reload_flag,
[lt_cv_ld_reload_flag='-r'])
reload_flag=$lt_cv_ld_reload_flag
case $reload_flag in
"" | " "*) ;;
*) reload_flag=" $reload_flag" ;;
esac
reload_cmds='$LD$reload_flag -o $output$reload_objs'
case $host_os in
cygwin* | mingw* | pw32* | cegcc*)
if test yes != "$GCC"; then
reload_cmds=false
fi
;;
darwin*)
if test yes = "$GCC"; then
reload_cmds='$LTCC $LTCFLAGS -nostdlib $wl-r -o $output$reload_objs'
else
reload_cmds='$LD$reload_flag -o $output$reload_objs'
fi
;;
esac
_LT_TAGDECL([], [reload_flag], [1], [How to create reloadable object files])dnl
_LT_TAGDECL([], [reload_cmds], [2])dnl
])# _LT_CMD_RELOAD
# _LT_PATH_DD
# -----------
# find a working dd
m4_defun([_LT_PATH_DD],
[AC_CACHE_CHECK([for a working dd], [ac_cv_path_lt_DD],
[printf 0123456789abcdef0123456789abcdef >conftest.i
cat conftest.i conftest.i >conftest2.i
: ${lt_DD:=$DD}
AC_PATH_PROGS_FEATURE_CHECK([lt_DD], [dd],
[if "$ac_path_lt_DD" bs=32 count=1 <conftest2.i >conftest.out 2>/dev/null; then
cmp -s conftest.i conftest.out \
&& ac_cv_path_lt_DD="$ac_path_lt_DD" ac_path_lt_DD_found=:
fi])
rm -f conftest.i conftest2.i conftest.out])
])# _LT_PATH_DD
# _LT_CMD_TRUNCATE
# ----------------
# find command to truncate a binary pipe
m4_defun([_LT_CMD_TRUNCATE],
[m4_require([_LT_PATH_DD])
AC_CACHE_CHECK([how to truncate binary pipes], [lt_cv_truncate_bin],
[printf 0123456789abcdef0123456789abcdef >conftest.i
cat conftest.i conftest.i >conftest2.i
lt_cv_truncate_bin=
if "$ac_cv_path_lt_DD" bs=32 count=1 <conftest2.i >conftest.out 2>/dev/null; then
cmp -s conftest.i conftest.out \
&& lt_cv_truncate_bin="$ac_cv_path_lt_DD bs=4096 count=1"
fi
rm -f conftest.i conftest2.i conftest.out
test -z "$lt_cv_truncate_bin" && lt_cv_truncate_bin="$SED -e 4q"])
_LT_DECL([lt_truncate_bin], [lt_cv_truncate_bin], [1],
[Command to truncate a binary pipe])
])# _LT_CMD_TRUNCATE
# _LT_CHECK_MAGIC_METHOD
# ----------------------
# how to check for library dependencies
# -- PORTME fill in with the dynamic library characteristics
m4_defun([_LT_CHECK_MAGIC_METHOD],
[m4_require([_LT_DECL_EGREP])
m4_require([_LT_DECL_OBJDUMP])
AC_CACHE_CHECK([how to recognize dependent libraries],
lt_cv_deplibs_check_method,
[lt_cv_file_magic_cmd='$MAGIC_CMD'
lt_cv_file_magic_test_file=
lt_cv_deplibs_check_method='unknown'
# Need to set the preceding variable on all platforms that support
# interlibrary dependencies.
# 'none' -- dependencies not supported.
# 'unknown' -- same as none, but documents that we really don't know.
# 'pass_all' -- all dependencies passed with no checks.
# 'test_compile' -- check by making test program.
# 'file_magic [[regex]]' -- check by looking for files in library path
# that responds to the $file_magic_cmd with a given extended regex.
# If you have 'file' or equivalent on your system and you're not sure
# whether 'pass_all' will *always* work, you probably want this one.
case $host_os in
aix[[4-9]]*)
lt_cv_deplibs_check_method=pass_all
;;
beos*)
lt_cv_deplibs_check_method=pass_all
;;
bsdi[[45]]*)
lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)'
lt_cv_file_magic_cmd='/usr/bin/file -L'
lt_cv_file_magic_test_file=/shlib/libc.so
;;
cygwin*)
# func_win32_libid is a shell function defined in ltmain.sh
lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
lt_cv_file_magic_cmd='func_win32_libid'
;;
mingw* | pw32*)
# Base MSYS/MinGW do not provide the 'file' command needed by
# func_win32_libid shell function, so use a weaker test based on 'objdump',
# unless we find 'file', for example because we are cross-compiling.
if ( file / ) >/dev/null 2>&1; then
lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
lt_cv_file_magic_cmd='func_win32_libid'
else
# Keep this pattern in sync with the one in func_win32_libid.
lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)'
lt_cv_file_magic_cmd='$OBJDUMP -f'
fi
;;
cegcc*)
# use the weaker test based on 'objdump'. See mingw*.
lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?'
lt_cv_file_magic_cmd='$OBJDUMP -f'
;;
darwin* | rhapsody*)
lt_cv_deplibs_check_method=pass_all
;;
freebsd* | dragonfly*)
if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
case $host_cpu in
i*86 )
# Not sure whether the presence of OpenBSD here was a mistake.
# Let's accept both of them until this is cleared up.
lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library'
lt_cv_file_magic_cmd=/usr/bin/file
lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
;;
esac
else
lt_cv_deplibs_check_method=pass_all
fi
;;
haiku*)
lt_cv_deplibs_check_method=pass_all
;;
hpux10.20* | hpux11*)
lt_cv_file_magic_cmd=/usr/bin/file
case $host_cpu in
ia64*)
lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64'
lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
;;
hppa*64*)
[lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]']
lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
;;
*)
lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]]\.[[0-9]]) shared library'
lt_cv_file_magic_test_file=/usr/lib/libc.sl
;;
esac
;;
interix[[3-9]]*)
# PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$'
;;
irix5* | irix6* | nonstopux*)
case $LD in
*-32|*"-32 ") libmagic=32-bit;;
*-n32|*"-n32 ") libmagic=N32;;
*-64|*"-64 ") libmagic=64-bit;;
*) libmagic=never-match;;
esac
lt_cv_deplibs_check_method=pass_all
;;
# This must be glibc/ELF.
linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
lt_cv_deplibs_check_method=pass_all
;;
netbsd*)
if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
else
lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$'
fi
;;
newos6*)
lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)'
lt_cv_file_magic_cmd=/usr/bin/file
lt_cv_file_magic_test_file=/usr/lib/libnls.so
;;
*nto* | *qnx*)
lt_cv_deplibs_check_method=pass_all
;;
openbsd* | bitrig*)
if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then
lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$'
else
lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
fi
;;
osf3* | osf4* | osf5*)
lt_cv_deplibs_check_method=pass_all
;;
rdos*)
lt_cv_deplibs_check_method=pass_all
;;
solaris*)
lt_cv_deplibs_check_method=pass_all
;;
sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
lt_cv_deplibs_check_method=pass_all
;;
sysv4 | sysv4.3*)
case $host_vendor in
motorola)
lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]'
lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
;;
ncr)
lt_cv_deplibs_check_method=pass_all
;;
sequent)
lt_cv_file_magic_cmd='/bin/file'
lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )'
;;
sni)
lt_cv_file_magic_cmd='/bin/file'
lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib"
lt_cv_file_magic_test_file=/lib/libc.so
;;
siemens)
lt_cv_deplibs_check_method=pass_all
;;
pc)
lt_cv_deplibs_check_method=pass_all
;;
esac
;;
tpf*)
lt_cv_deplibs_check_method=pass_all
;;
os2*)
lt_cv_deplibs_check_method=pass_all
;;
esac
])
file_magic_glob=
want_nocaseglob=no
if test "$build" = "$host"; then
case $host_os in
mingw* | pw32*)
if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then
want_nocaseglob=yes
else
file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[[\1]]\/[[\1]]\/g;/g"`
fi
;;
esac
fi
file_magic_cmd=$lt_cv_file_magic_cmd
deplibs_check_method=$lt_cv_deplibs_check_method
test -z "$deplibs_check_method" && deplibs_check_method=unknown
_LT_DECL([], [deplibs_check_method], [1],
[Method to check whether dependent libraries are shared objects])
_LT_DECL([], [file_magic_cmd], [1],
[Command to use when deplibs_check_method = "file_magic"])
_LT_DECL([], [file_magic_glob], [1],
[How to find potential files when deplibs_check_method = "file_magic"])
_LT_DECL([], [want_nocaseglob], [1],
[Find potential files using nocaseglob when deplibs_check_method = "file_magic"])
])# _LT_CHECK_MAGIC_METHOD
# LT_PATH_NM
# ----------
# find the pathname to a BSD- or MS-compatible name lister
AC_DEFUN([LT_PATH_NM],
[AC_REQUIRE([AC_PROG_CC])dnl
AC_CACHE_CHECK([for BSD- or MS-compatible name lister (nm)], lt_cv_path_NM,
[if test -n "$NM"; then
# Let the user override the test.
lt_cv_path_NM=$NM
else
lt_nm_to_check=${ac_tool_prefix}nm
if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
lt_nm_to_check="$lt_nm_to_check nm"
fi
for lt_tmp_nm in $lt_nm_to_check; do
lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
IFS=$lt_save_ifs
test -z "$ac_dir" && ac_dir=.
tmp_nm=$ac_dir/$lt_tmp_nm
if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext"; then
# Check to see if the nm accepts a BSD-compat flag.
# Adding the 'sed 1q' prevents false positives on HP-UX, which says:
# nm: unknown option "B" ignored
# Tru64's nm complains that /dev/null is an invalid object file
# MSYS converts /dev/null to NUL, MinGW nm treats NUL as empty
case $build_os in
mingw*) lt_bad_file=conftest.nm/nofile ;;
*) lt_bad_file=/dev/null ;;
esac
case `"$tmp_nm" -B $lt_bad_file 2>&1 | sed '1q'` in
*$lt_bad_file* | *'Invalid file or object type'*)
lt_cv_path_NM="$tmp_nm -B"
break 2
;;
*)
case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
*/dev/null*)
lt_cv_path_NM="$tmp_nm -p"
break 2
;;
*)
lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
continue # so that we can try to find one that supports BSD flags
;;
esac
;;
esac
fi
done
IFS=$lt_save_ifs
done
: ${lt_cv_path_NM=no}
fi])
if test no != "$lt_cv_path_NM"; then
NM=$lt_cv_path_NM
else
# Didn't find any BSD compatible name lister, look for dumpbin.
if test -n "$DUMPBIN"; then :
# Let the user override the test.
else
AC_CHECK_TOOLS(DUMPBIN, [dumpbin "link -dump"], :)
case `$DUMPBIN -symbols -headers /dev/null 2>&1 | sed '1q'` in
*COFF*)
DUMPBIN="$DUMPBIN -symbols -headers"
;;
*)
DUMPBIN=:
;;
esac
fi
AC_SUBST([DUMPBIN])
if test : != "$DUMPBIN"; then
NM=$DUMPBIN
fi
fi
test -z "$NM" && NM=nm
AC_SUBST([NM])
_LT_DECL([], [NM], [1], [A BSD- or MS-compatible name lister])dnl
AC_CACHE_CHECK([the name lister ($NM) interface], [lt_cv_nm_interface],
[lt_cv_nm_interface="BSD nm"
echo "int some_variable = 0;" > conftest.$ac_ext
(eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&AS_MESSAGE_LOG_FD)
(eval "$ac_compile" 2>conftest.err)
cat conftest.err >&AS_MESSAGE_LOG_FD
(eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD)
(eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
cat conftest.err >&AS_MESSAGE_LOG_FD
(eval echo "\"\$as_me:$LINENO: output\"" >&AS_MESSAGE_LOG_FD)
cat conftest.out >&AS_MESSAGE_LOG_FD
if $GREP 'External.*some_variable' conftest.out > /dev/null; then
lt_cv_nm_interface="MS dumpbin"
fi
rm -f conftest*])
])# LT_PATH_NM
# Old names:
AU_ALIAS([AM_PROG_NM], [LT_PATH_NM])
AU_ALIAS([AC_PROG_NM], [LT_PATH_NM])
dnl aclocal-1.4 backwards compatibility:
dnl AC_DEFUN([AM_PROG_NM], [])
dnl AC_DEFUN([AC_PROG_NM], [])
# _LT_CHECK_SHAREDLIB_FROM_LINKLIB
# --------------------------------
# how to determine the name of the shared library
# associated with a specific link library.
# -- PORTME fill in with the dynamic library characteristics
m4_defun([_LT_CHECK_SHAREDLIB_FROM_LINKLIB],
[m4_require([_LT_DECL_EGREP])
m4_require([_LT_DECL_OBJDUMP])
m4_require([_LT_DECL_DLLTOOL])
AC_CACHE_CHECK([how to associate runtime and link libraries],
lt_cv_sharedlib_from_linklib_cmd,
[lt_cv_sharedlib_from_linklib_cmd='unknown'
case $host_os in
cygwin* | mingw* | pw32* | cegcc*)
# two different shell functions defined in ltmain.sh;
# decide which one to use based on capabilities of $DLLTOOL
case `$DLLTOOL --help 2>&1` in
*--identify-strict*)
lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib
;;
*)
lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback
;;
esac
;;
*)
# fallback: assume linklib IS sharedlib
lt_cv_sharedlib_from_linklib_cmd=$ECHO
;;
esac
])
sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd
test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO
_LT_DECL([], [sharedlib_from_linklib_cmd], [1],
[Command to associate shared and link libraries])
])# _LT_CHECK_SHAREDLIB_FROM_LINKLIB
# _LT_PATH_MANIFEST_TOOL
# ----------------------
# locate the manifest tool
m4_defun([_LT_PATH_MANIFEST_TOOL],
[AC_CHECK_TOOL(MANIFEST_TOOL, mt, :)
test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt
AC_CACHE_CHECK([if $MANIFEST_TOOL is a manifest tool], [lt_cv_path_mainfest_tool],
[lt_cv_path_mainfest_tool=no
echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&AS_MESSAGE_LOG_FD
$MANIFEST_TOOL '-?' 2>conftest.err > conftest.out
cat conftest.err >&AS_MESSAGE_LOG_FD
if $GREP 'Manifest Tool' conftest.out > /dev/null; then
lt_cv_path_mainfest_tool=yes
fi
rm -f conftest*])
if test yes != "$lt_cv_path_mainfest_tool"; then
MANIFEST_TOOL=:
fi
_LT_DECL([], [MANIFEST_TOOL], [1], [Manifest tool])dnl
])# _LT_PATH_MANIFEST_TOOL
# _LT_DLL_DEF_P([FILE])
# ---------------------
# True iff FILE is a Windows DLL '.def' file.
# Keep in sync with func_dll_def_p in the libtool script
AC_DEFUN([_LT_DLL_DEF_P],
[dnl
test DEF = "`$SED -n dnl
-e '\''s/^[[ ]]*//'\'' dnl Strip leading whitespace
-e '\''/^\(;.*\)*$/d'\'' dnl Delete empty lines and comments
-e '\''s/^\(EXPORTS\|LIBRARY\)\([[ ]].*\)*$/DEF/p'\'' dnl
-e q dnl Only consider the first "real" line
$1`" dnl
])# _LT_DLL_DEF_P
# LT_LIB_M
# --------
# check for math library
AC_DEFUN([LT_LIB_M],
[AC_REQUIRE([AC_CANONICAL_HOST])dnl
LIBM=
case $host in
*-*-beos* | *-*-cegcc* | *-*-cygwin* | *-*-haiku* | *-*-pw32* | *-*-darwin*)
# These system don't have libm, or don't need it
;;
*-ncr-sysv4.3*)
AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM=-lmw)
AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm")
;;
*)
AC_CHECK_LIB(m, cos, LIBM=-lm)
;;
esac
AC_SUBST([LIBM])
])# LT_LIB_M
# Old name:
AU_ALIAS([AC_CHECK_LIBM], [LT_LIB_M])
dnl aclocal-1.4 backwards compatibility:
dnl AC_DEFUN([AC_CHECK_LIBM], [])
# _LT_COMPILER_NO_RTTI([TAGNAME])
# -------------------------------
m4_defun([_LT_COMPILER_NO_RTTI],
[m4_require([_LT_TAG_COMPILER])dnl
_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
if test yes = "$GCC"; then
case $cc_basename in
nvcc*)
_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -Xcompiler -fno-builtin' ;;
*)
_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' ;;
esac
_LT_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions],
lt_cv_prog_compiler_rtti_exceptions,
[-fno-rtti -fno-exceptions], [],
[_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"])
fi
_LT_TAGDECL([no_builtin_flag], [lt_prog_compiler_no_builtin_flag], [1],
[Compiler flag to turn off builtin functions])
])# _LT_COMPILER_NO_RTTI
# _LT_CMD_GLOBAL_SYMBOLS
# ----------------------
m4_defun([_LT_CMD_GLOBAL_SYMBOLS],
[AC_REQUIRE([AC_CANONICAL_HOST])dnl
AC_REQUIRE([AC_PROG_CC])dnl
AC_REQUIRE([AC_PROG_AWK])dnl
AC_REQUIRE([LT_PATH_NM])dnl
AC_REQUIRE([LT_PATH_LD])dnl
m4_require([_LT_DECL_SED])dnl
m4_require([_LT_DECL_EGREP])dnl
m4_require([_LT_TAG_COMPILER])dnl
# Check for command to grab the raw symbol name followed by C symbol from nm.
AC_MSG_CHECKING([command to parse $NM output from $compiler object])
AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe],
[
# These are sane defaults that work on at least a few old systems.
# [They come from Ultrix. What could be older than Ultrix?!! ;)]
# Character class describing NM global symbol codes.
symcode='[[BCDEGRST]]'
# Regexp to match symbols that can be accessed directly from C.
sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)'
# Define system-specific variables.
case $host_os in
aix*)
symcode='[[BCDT]]'
;;
cygwin* | mingw* | pw32* | cegcc*)
symcode='[[ABCDGISTW]]'
;;
hpux*)
if test ia64 = "$host_cpu"; then
symcode='[[ABCDEGRST]]'
fi
;;
irix* | nonstopux*)
symcode='[[BCDEGRST]]'
;;
osf*)
symcode='[[BCDEGQRST]]'
;;
solaris*)
symcode='[[BDRT]]'
;;
sco3.2v5*)
symcode='[[DT]]'
;;
sysv4.2uw2*)
symcode='[[DT]]'
;;
sysv5* | sco5v6* | unixware* | OpenUNIX*)
symcode='[[ABDT]]'
;;
sysv4)
symcode='[[DFNSTU]]'
;;
esac
# If we're using GNU nm, then use its standard symbol codes.
case `$NM -V 2>&1` in
*GNU* | *'with BFD'*)
symcode='[[ABCDGIRSTW]]' ;;
esac
if test "$lt_cv_nm_interface" = "MS dumpbin"; then
# Gets list of data symbols to import.
lt_cv_sys_global_symbol_to_import="sed -n -e 's/^I .* \(.*\)$/\1/p'"
# Adjust the below global symbol transforms to fixup imported variables.
lt_cdecl_hook=" -e 's/^I .* \(.*\)$/extern __declspec(dllimport) char \1;/p'"
lt_c_name_hook=" -e 's/^I .* \(.*\)$/ {\"\1\", (void *) 0},/p'"
lt_c_name_lib_hook="\
-e 's/^I .* \(lib.*\)$/ {\"\1\", (void *) 0},/p'\
-e 's/^I .* \(.*\)$/ {\"lib\1\", (void *) 0},/p'"
else
# Disable hooks by default.
lt_cv_sys_global_symbol_to_import=
lt_cdecl_hook=
lt_c_name_hook=
lt_c_name_lib_hook=
fi
# Transform an extracted symbol line into a proper C declaration.
# Some systems (esp. on ia64) link data and code symbols differently,
# so use this general approach.
lt_cv_sys_global_symbol_to_cdecl="sed -n"\
$lt_cdecl_hook\
" -e 's/^T .* \(.*\)$/extern int \1();/p'"\
" -e 's/^$symcode$symcode* .* \(.*\)$/extern char \1;/p'"
# Transform an extracted symbol line into symbol name and symbol address
lt_cv_sys_global_symbol_to_c_name_address="sed -n"\
$lt_c_name_hook\
" -e 's/^: \(.*\) .*$/ {\"\1\", (void *) 0},/p'"\
" -e 's/^$symcode$symcode* .* \(.*\)$/ {\"\1\", (void *) \&\1},/p'"
# Transform an extracted symbol line into symbol name with lib prefix and
# symbol address.
lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n"\
$lt_c_name_lib_hook\
" -e 's/^: \(.*\) .*$/ {\"\1\", (void *) 0},/p'"\
" -e 's/^$symcode$symcode* .* \(lib.*\)$/ {\"\1\", (void *) \&\1},/p'"\
" -e 's/^$symcode$symcode* .* \(.*\)$/ {\"lib\1\", (void *) \&\1},/p'"
# Handle CRLF in mingw tool chain
opt_cr=
case $build_os in
mingw*)
opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp
;;
esac
# Try without a prefix underscore, then with it.
for ac_symprfx in "" "_"; do
# Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
symxfrm="\\1 $ac_symprfx\\2 \\2"
# Write the raw and C identifiers.
if test "$lt_cv_nm_interface" = "MS dumpbin"; then
# Fake it for dumpbin and say T for any non-static function,
# D for any global variable and I for any imported variable.
# Also find C++ and __fastcall symbols from MSVC++,
# which start with @ or ?.
lt_cv_sys_global_symbol_pipe="$AWK ['"\
" {last_section=section; section=\$ 3};"\
" /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\
" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\
" /^ *Symbol name *: /{split(\$ 0,sn,\":\"); si=substr(sn[2],2)};"\
" /^ *Type *: code/{print \"T\",si,substr(si,length(prfx))};"\
" /^ *Type *: data/{print \"I\",si,substr(si,length(prfx))};"\
" \$ 0!~/External *\|/{next};"\
" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\
" {if(hide[section]) next};"\
" {f=\"D\"}; \$ 0~/\(\).*\|/{f=\"T\"};"\
" {split(\$ 0,a,/\||\r/); split(a[2],s)};"\
" s[1]~/^[@?]/{print f,s[1],s[1]; next};"\
" s[1]~prfx {split(s[1],t,\"@\"); print f,t[1],substr(t[1],length(prfx))}"\
" ' prfx=^$ac_symprfx]"
else
lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
fi
lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'"
# Check to see that the pipe works correctly.
pipe_works=no
rm -f conftest*
cat > conftest.$ac_ext <<_LT_EOF
#ifdef __cplusplus
extern "C" {
#endif
char nm_test_var;
void nm_test_func(void);
void nm_test_func(void){}
#ifdef __cplusplus
}
#endif
int main(){nm_test_var='a';nm_test_func();return(0);}
_LT_EOF
if AC_TRY_EVAL(ac_compile); then
# Now try to grab the symbols.
nlist=conftest.nm
if AC_TRY_EVAL(NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) && test -s "$nlist"; then
# Try sorting and uniquifying the output.
if sort "$nlist" | uniq > "$nlist"T; then
mv -f "$nlist"T "$nlist"
else
rm -f "$nlist"T
fi
# Make sure that we snagged all the symbols we need.
if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
cat <<_LT_EOF > conftest.$ac_ext
/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */
#if defined _WIN32 || defined __CYGWIN__ || defined _WIN32_WCE
/* DATA imports from DLLs on WIN32 can't be const, because runtime
relocations are performed -- see ld's documentation on pseudo-relocs. */
# define LT@&t@_DLSYM_CONST
#elif defined __osf__
/* This system does not cope well with relocations in const data. */
# define LT@&t@_DLSYM_CONST
#else
# define LT@&t@_DLSYM_CONST const
#endif
#ifdef __cplusplus
extern "C" {
#endif
_LT_EOF
# Now generate the symbol file.
eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext'
cat <<_LT_EOF >> conftest.$ac_ext
/* The mapping between symbol names and symbols. */
LT@&t@_DLSYM_CONST struct {
const char *name;
void *address;
}
lt__PROGRAM__LTX_preloaded_symbols[[]] =
{
{ "@PROGRAM@", (void *) 0 },
_LT_EOF
$SED "s/^$symcode$symcode* .* \(.*\)$/ {\"\1\", (void *) \&\1},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
cat <<\_LT_EOF >> conftest.$ac_ext
{0, (void *) 0}
};
/* This works around a problem in FreeBSD linker */
#ifdef FREEBSD_WORKAROUND
static const void *lt_preloaded_setup() {
return lt__PROGRAM__LTX_preloaded_symbols;
}
#endif
#ifdef __cplusplus
}
#endif
_LT_EOF
# Now try linking the two files.
mv conftest.$ac_objext conftstm.$ac_objext
lt_globsym_save_LIBS=$LIBS
lt_globsym_save_CFLAGS=$CFLAGS
LIBS=conftstm.$ac_objext
CFLAGS="$CFLAGS$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)"
if AC_TRY_EVAL(ac_link) && test -s conftest$ac_exeext; then
pipe_works=yes
fi
LIBS=$lt_globsym_save_LIBS
CFLAGS=$lt_globsym_save_CFLAGS
else
echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD
fi
else
echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD
fi
else
echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD
fi
else
echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD
cat conftest.$ac_ext >&5
fi
rm -rf conftest* conftst*
# Do not use the global_symbol_pipe unless it works.
if test yes = "$pipe_works"; then
break
else
lt_cv_sys_global_symbol_pipe=
fi
done
])
if test -z "$lt_cv_sys_global_symbol_pipe"; then
lt_cv_sys_global_symbol_to_cdecl=
fi
if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
AC_MSG_RESULT(failed)
else
AC_MSG_RESULT(ok)
fi
# Response file support.
if test "$lt_cv_nm_interface" = "MS dumpbin"; then
nm_file_list_spec='@'
elif $NM --help 2>/dev/null | grep '[[@]]FILE' >/dev/null; then
nm_file_list_spec='@'
fi
_LT_DECL([global_symbol_pipe], [lt_cv_sys_global_symbol_pipe], [1],
[Take the output of nm and produce a listing of raw symbols and C names])
_LT_DECL([global_symbol_to_cdecl], [lt_cv_sys_global_symbol_to_cdecl], [1],
[Transform the output of nm in a proper C declaration])
_LT_DECL([global_symbol_to_import], [lt_cv_sys_global_symbol_to_import], [1],
[Transform the output of nm into a list of symbols to manually relocate])
_LT_DECL([global_symbol_to_c_name_address],
[lt_cv_sys_global_symbol_to_c_name_address], [1],
[Transform the output of nm in a C name address pair])
_LT_DECL([global_symbol_to_c_name_address_lib_prefix],
[lt_cv_sys_global_symbol_to_c_name_address_lib_prefix], [1],
[Transform the output of nm in a C name address pair when lib prefix is needed])
_LT_DECL([nm_interface], [lt_cv_nm_interface], [1],
[The name lister interface])
_LT_DECL([], [nm_file_list_spec], [1],
[Specify filename containing input files for $NM])
]) # _LT_CMD_GLOBAL_SYMBOLS
# _LT_COMPILER_PIC([TAGNAME])
# ---------------------------
m4_defun([_LT_COMPILER_PIC],
[m4_require([_LT_TAG_COMPILER])dnl
_LT_TAGVAR(lt_prog_compiler_wl, $1)=
_LT_TAGVAR(lt_prog_compiler_pic, $1)=
_LT_TAGVAR(lt_prog_compiler_static, $1)=
m4_if([$1], [CXX], [
# C++ specific cases for pic, static, wl, etc.
if test yes = "$GXX"; then
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
case $host_os in
aix*)
# All AIX code is PIC.
if test ia64 = "$host_cpu"; then
# AIX 5 now supports IA64 processor
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
fi
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
;;
amigaos*)
case $host_cpu in
powerpc)
# see comment about AmigaOS4 .so support
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
;;
m68k)
# FIXME: we need at least 68020 code to build shared libraries, but
# adding the '-m68020' flag to GCC prevents building anything better,
# like '-m68040'.
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
;;
esac
;;
beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
# PIC is the default for these OSes.
;;
mingw* | cygwin* | os2* | pw32* | cegcc*)
# This hack is so that the source file can tell whether it is being
# built for inclusion in a dll (and should export symbols for example).
# Although the cygwin gcc ignores -fPIC, still need this for old-style
# (--disable-auto-import) libraries
m4_if([$1], [GCJ], [],
[_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
case $host_os in
os2*)
_LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-static'
;;
esac
;;
darwin* | rhapsody*)
# PIC is the default on this platform
# Common symbols not allowed in MH_DYLIB files
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
;;
*djgpp*)
# DJGPP does not support shared libraries at all
_LT_TAGVAR(lt_prog_compiler_pic, $1)=
;;
haiku*)
# PIC is the default for Haiku.
# The "-static" flag exists, but is broken.
_LT_TAGVAR(lt_prog_compiler_static, $1)=
;;
interix[[3-9]]*)
# Interix 3.x gcc -fpic/-fPIC options generate broken code.
# Instead, we relocate shared libraries at runtime.
;;
sysv4*MP*)
if test -d /usr/nec; then
_LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
fi
;;
hpux*)
# PIC is the default for 64-bit PA HP-UX, but not for 32-bit
# PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag
# sets the default TLS model and affects inlining.
case $host_cpu in
hppa*64*)
;;
*)
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
;;
esac
;;
*qnx* | *nto*)
# QNX uses GNU C++, but need to define -shared option too, otherwise
# it will coredump.
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
;;
*)
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
;;
esac
else
case $host_os in
aix[[4-9]]*)
# All AIX code is PIC.
if test ia64 = "$host_cpu"; then
# AIX 5 now supports IA64 processor
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
else
_LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
fi
;;
chorus*)
case $cc_basename in
cxch68*)
# Green Hills C++ Compiler
# _LT_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
;;
esac
;;
mingw* | cygwin* | os2* | pw32* | cegcc*)
# This hack is so that the source file can tell whether it is being
# built for inclusion in a dll (and should export symbols for example).
m4_if([$1], [GCJ], [],
[_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
;;
dgux*)
case $cc_basename in
ec++*)
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
;;
ghcx*)
# Green Hills C++ Compiler
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
;;
*)
;;
esac
;;
freebsd* | dragonfly*)
# FreeBSD uses GNU C++
;;
hpux9* | hpux10* | hpux11*)
case $cc_basename in
CC*)
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-a ${wl}archive'
if test ia64 != "$host_cpu"; then
_LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
fi
;;
aCC*)
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-a ${wl}archive'
case $host_cpu in
hppa*64*|ia64*)
# +Z the default
;;
*)
_LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
;;
esac
;;
*)
;;
esac
;;
interix*)
# This is c89, which is MS Visual C++ (no shared libs)
# Anyone wants to do a port?
;;
irix5* | irix6* | nonstopux*)
case $cc_basename in
CC*)
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
# CC pic flag -KPIC is the default.
;;
*)
;;
esac
;;
linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
case $cc_basename in
KCC*)
# KAI C++ Compiler
_LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
;;
ecpc* )
# old Intel C++ for x86_64, which still supported -KPIC.
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
;;
icpc* )
# Intel C++, used to be incompatible with GCC.
# ICC 10 doesn't accept -KPIC any more.
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
;;
pgCC* | pgcpp*)
# Portland Group C++ compiler
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
;;
cxx*)
# Compaq C++
# Make sure the PIC flag is empty. It appears that all Alpha
# Linux and Compaq Tru64 Unix objects are PIC.
_LT_TAGVAR(lt_prog_compiler_pic, $1)=
_LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
;;
xlc* | xlC* | bgxl[[cC]]* | mpixl[[cC]]*)
# IBM XL 8.0, 9.0 on PPC and BlueGene
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink'
;;
*)
case `$CC -V 2>&1 | sed 5q` in
*Sun\ C*)
# Sun C++ 5.9
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
;;
esac
;;
esac
;;
lynxos*)
;;
m88k*)
;;
mvs*)
case $cc_basename in
cxx*)
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall'
;;
*)
;;
esac
;;
netbsd*)
;;
*qnx* | *nto*)
# QNX uses GNU C++, but need to define -shared option too, otherwise
# it will coredump.
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
;;
osf3* | osf4* | osf5*)
case $cc_basename in
KCC*)
_LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
;;
RCC*)
# Rational C++ 2.4.1
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
;;
cxx*)
# Digital/Compaq C++
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
# Make sure the PIC flag is empty. It appears that all Alpha
# Linux and Compaq Tru64 Unix objects are PIC.
_LT_TAGVAR(lt_prog_compiler_pic, $1)=
_LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
;;
*)
;;
esac
;;
psos*)
;;
solaris*)
case $cc_basename in
CC* | sunCC*)
# Sun C++ 4.2, 5.x and Centerline C++
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
;;
gcx*)
# Green Hills C++ Compiler
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
;;
*)
;;
esac
;;
sunos4*)
case $cc_basename in
CC*)
# Sun C++ 4.x
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
;;
lcc*)
# Lucid
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
;;
*)
;;
esac
;;
sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
case $cc_basename in
CC*)
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
;;
esac
;;
tandem*)
case $cc_basename in
NCC*)
# NonStop-UX NCC 3.20
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
;;
*)
;;
esac
;;
vxworks*)
;;
*)
_LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
;;
esac
fi
],
[
if test yes = "$GCC"; then
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
case $host_os in
aix*)
# All AIX code is PIC.
if test ia64 = "$host_cpu"; then
# AIX 5 now supports IA64 processor
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
fi
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
;;
amigaos*)
case $host_cpu in
powerpc)
# see comment about AmigaOS4 .so support
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
;;
m68k)
# FIXME: we need at least 68020 code to build shared libraries, but
# adding the '-m68020' flag to GCC prevents building anything better,
# like '-m68040'.
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
;;
esac
;;
beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
# PIC is the default for these OSes.
;;
mingw* | cygwin* | pw32* | os2* | cegcc*)
# This hack is so that the source file can tell whether it is being
# built for inclusion in a dll (and should export symbols for example).
# Although the cygwin gcc ignores -fPIC, still need this for old-style
# (--disable-auto-import) libraries
m4_if([$1], [GCJ], [],
[_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
case $host_os in
os2*)
_LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-static'
;;
esac
;;
darwin* | rhapsody*)
# PIC is the default on this platform
# Common symbols not allowed in MH_DYLIB files
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
;;
haiku*)
# PIC is the default for Haiku.
# The "-static" flag exists, but is broken.
_LT_TAGVAR(lt_prog_compiler_static, $1)=
;;
hpux*)
# PIC is the default for 64-bit PA HP-UX, but not for 32-bit
# PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag
# sets the default TLS model and affects inlining.
case $host_cpu in
hppa*64*)
# +Z the default
;;
*)
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
;;
esac
;;
interix[[3-9]]*)
# Interix 3.x gcc -fpic/-fPIC options generate broken code.
# Instead, we relocate shared libraries at runtime.
;;
msdosdjgpp*)
# Just because we use GCC doesn't mean we suddenly get shared libraries
# on systems that don't support them.
_LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
enable_shared=no
;;
*nto* | *qnx*)
# QNX uses GNU C++, but need to define -shared option too, otherwise
# it will coredump.
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
;;
sysv4*MP*)
if test -d /usr/nec; then
_LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
fi
;;
*)
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
;;
esac
case $cc_basename in
nvcc*) # Cuda Compiler Driver 2.2
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Xlinker '
if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then
_LT_TAGVAR(lt_prog_compiler_pic, $1)="-Xcompiler $_LT_TAGVAR(lt_prog_compiler_pic, $1)"
fi
;;
esac
else
# PORTME Check for flag to pass linker flags through the system compiler.
case $host_os in
aix*)
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
if test ia64 = "$host_cpu"; then
# AIX 5 now supports IA64 processor
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
else
_LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
fi
;;
darwin* | rhapsody*)
# PIC is the default on this platform
# Common symbols not allowed in MH_DYLIB files
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
case $cc_basename in
nagfor*)
# NAG Fortran compiler
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,-Wl,,'
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
;;
esac
;;
mingw* | cygwin* | pw32* | os2* | cegcc*)
# This hack is so that the source file can tell whether it is being
# built for inclusion in a dll (and should export symbols for example).
m4_if([$1], [GCJ], [],
[_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
case $host_os in
os2*)
_LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-static'
;;
esac
;;
hpux9* | hpux10* | hpux11*)
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
# PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
# not for PA HP-UX.
case $host_cpu in
hppa*64*|ia64*)
# +Z the default
;;
*)
_LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
;;
esac
# Is there a better lt_prog_compiler_static that works with the bundled CC?
_LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-a ${wl}archive'
;;
irix5* | irix6* | nonstopux*)
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
# PIC (with -KPIC) is the default.
_LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
;;
linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
case $cc_basename in
# old Intel for x86_64, which still supported -KPIC.
ecc*)
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
;;
# icc used to be incompatible with GCC.
# ICC 10 doesn't accept -KPIC any more.
icc* | ifort*)
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
;;
# Lahey Fortran 8.1.
lf95*)
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_TAGVAR(lt_prog_compiler_pic, $1)='--shared'
_LT_TAGVAR(lt_prog_compiler_static, $1)='--static'
;;
nagfor*)
# NAG Fortran compiler
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,-Wl,,'
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
;;
tcc*)
# Fabrice Bellard et al's Tiny C Compiler
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
;;
pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
# Portland Group compilers (*not* the Pentium gcc compiler,
# which looks to be a dead project)
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
;;
ccc*)
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
# All Alpha code is PIC.
_LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
;;
xl* | bgxl* | bgf* | mpixl*)
# IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink'
;;
*)
case `$CC -V 2>&1 | sed 5q` in
*Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [[1-7]].* | *Sun*Fortran*\ 8.[[0-3]]*)
# Sun Fortran 8.3 passes all unrecognized flags to the linker
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
_LT_TAGVAR(lt_prog_compiler_wl, $1)=''
;;
*Sun\ F* | *Sun*Fortran*)
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
;;
*Sun\ C*)
# Sun C 5.9
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
;;
*Intel*\ [[CF]]*Compiler*)
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
;;
*Portland\ Group*)
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
;;
esac
;;
esac
;;
newsos6)
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
;;
*nto* | *qnx*)
# QNX uses GNU C++, but need to define -shared option too, otherwise
# it will coredump.
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
;;
osf3* | osf4* | osf5*)
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
# All OSF/1 code is PIC.
_LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
;;
rdos*)
_LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
;;
solaris*)
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
case $cc_basename in
f77* | f90* | f95* | sunf77* | sunf90* | sunf95*)
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';;
*)
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';;
esac
;;
sunos4*)
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
;;
sysv4 | sysv4.2uw2* | sysv4.3*)
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
;;
sysv4*MP*)
if test -d /usr/nec; then
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
fi
;;
sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
;;
unicos*)
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
;;
uts4*)
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
;;
*)
_LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
;;
esac
fi
])
case $host_os in
# For platforms that do not support PIC, -DPIC is meaningless:
*djgpp*)
_LT_TAGVAR(lt_prog_compiler_pic, $1)=
;;
*)
_LT_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])"
;;
esac
AC_CACHE_CHECK([for $compiler option to produce PIC],
[_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)],
[_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_prog_compiler_pic, $1)])
_LT_TAGVAR(lt_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)
#
# Check to make sure the PIC flag actually works.
#
if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then
_LT_COMPILER_OPTION([if $compiler PIC flag $_LT_TAGVAR(lt_prog_compiler_pic, $1) works],
[_LT_TAGVAR(lt_cv_prog_compiler_pic_works, $1)],
[$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])], [],
[case $_LT_TAGVAR(lt_prog_compiler_pic, $1) in
"" | " "*) ;;
*) _LT_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_TAGVAR(lt_prog_compiler_pic, $1)" ;;
esac],
[_LT_TAGVAR(lt_prog_compiler_pic, $1)=
_LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no])
fi
_LT_TAGDECL([pic_flag], [lt_prog_compiler_pic], [1],
[Additional compiler flags for building library objects])
_LT_TAGDECL([wl], [lt_prog_compiler_wl], [1],
[How to pass a linker flag through the compiler])
#
# Check to make sure the static flag actually works.
#
wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_TAGVAR(lt_prog_compiler_static, $1)\"
_LT_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works],
_LT_TAGVAR(lt_cv_prog_compiler_static_works, $1),
$lt_tmp_static_flag,
[],
[_LT_TAGVAR(lt_prog_compiler_static, $1)=])
_LT_TAGDECL([link_static_flag], [lt_prog_compiler_static], [1],
[Compiler flag to prevent dynamic linking])
])# _LT_COMPILER_PIC
# _LT_LINKER_SHLIBS([TAGNAME])
# ----------------------------
# See if the linker supports building shared libraries.
m4_defun([_LT_LINKER_SHLIBS],
[AC_REQUIRE([LT_PATH_LD])dnl
AC_REQUIRE([LT_PATH_NM])dnl
m4_require([_LT_PATH_MANIFEST_TOOL])dnl
m4_require([_LT_FILEUTILS_DEFAULTS])dnl
m4_require([_LT_DECL_EGREP])dnl
m4_require([_LT_DECL_SED])dnl
m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
m4_require([_LT_TAG_COMPILER])dnl
AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
m4_if([$1], [CXX], [
_LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
_LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
case $host_os in
aix[[4-9]]*)
# If we're using GNU nm, then we don't want the "-C" option.
# -C means demangle to GNU nm, but means don't demangle to AIX nm.
# Without the "-l" option, or with the "-B" option, AIX nm treats
# weak defined symbols like other global defined symbols, whereas
# GNU nm marks them as "W".
# While the 'weak' keyword is ignored in the Export File, we need
# it in the Import File for the 'aix-soname' feature, so we have
# to replace the "-B" option with "-P" for AIX nm.
if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
_LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { if (\$ 2 == "W") { print \$ 3 " weak" } else { print \$ 3 } } }'\'' | sort -u > $export_symbols'
else
_LT_TAGVAR(export_symbols_cmds, $1)='`func_echo_all $NM | $SED -e '\''s/B\([[^B]]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && ([substr](\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols'
fi
;;
pw32*)
_LT_TAGVAR(export_symbols_cmds, $1)=$ltdll_cmds
;;
cygwin* | mingw* | cegcc*)
case $cc_basename in
cl*)
_LT_TAGVAR(exclude_expsyms, $1)='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*'
;;
*)
_LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols'
_LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname']
;;
esac
;;
*)
_LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
;;
esac
], [
runpath_var=
_LT_TAGVAR(allow_undefined_flag, $1)=
_LT_TAGVAR(always_export_symbols, $1)=no
_LT_TAGVAR(archive_cmds, $1)=
_LT_TAGVAR(archive_expsym_cmds, $1)=
_LT_TAGVAR(compiler_needs_object, $1)=no
_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
_LT_TAGVAR(export_dynamic_flag_spec, $1)=
_LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
_LT_TAGVAR(hardcode_automatic, $1)=no
_LT_TAGVAR(hardcode_direct, $1)=no
_LT_TAGVAR(hardcode_direct_absolute, $1)=no
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
_LT_TAGVAR(hardcode_libdir_separator, $1)=
_LT_TAGVAR(hardcode_minus_L, $1)=no
_LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
_LT_TAGVAR(inherit_rpath, $1)=no
_LT_TAGVAR(link_all_deplibs, $1)=unknown
_LT_TAGVAR(module_cmds, $1)=
_LT_TAGVAR(module_expsym_cmds, $1)=
_LT_TAGVAR(old_archive_from_new_cmds, $1)=
_LT_TAGVAR(old_archive_from_expsyms_cmds, $1)=
_LT_TAGVAR(thread_safe_flag_spec, $1)=
_LT_TAGVAR(whole_archive_flag_spec, $1)=
# include_expsyms should be a list of space-separated symbols to be *always*
# included in the symbol list
_LT_TAGVAR(include_expsyms, $1)=
# exclude_expsyms can be an extended regexp of symbols to exclude
# it will be wrapped by ' (' and ')$', so one must not match beginning or
# end of line. Example: 'a|bc|.*d.*' will exclude the symbols 'a' and 'bc',
# as well as any symbol that contains 'd'.
_LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
# Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
# platforms (ab)use it in PIC code, but their linkers get confused if
# the symbol is explicitly referenced. Since portable code cannot
# rely on this symbol name, it's probably fine to never include it in
# preloaded symbol tables.
# Exclude shared library initialization/finalization symbols.
dnl Note also adjust exclude_expsyms for C++ above.
extract_expsyms_cmds=
case $host_os in
cygwin* | mingw* | pw32* | cegcc*)
# FIXME: the MSVC++ port hasn't been tested in a loooong time
# When not using gcc, we currently assume that we are using
# Microsoft Visual C++.
if test yes != "$GCC"; then
with_gnu_ld=no
fi
;;
interix*)
# we just hope/assume this is gcc and not c89 (= MSVC++)
with_gnu_ld=yes
;;
openbsd* | bitrig*)
with_gnu_ld=no
;;
esac
_LT_TAGVAR(ld_shlibs, $1)=yes
# On some targets, GNU ld is compatible enough with the native linker
# that we're better off using the native interface for both.
lt_use_gnu_ld_interface=no
if test yes = "$with_gnu_ld"; then
case $host_os in
aix*)
# The AIX port of GNU ld has always aspired to compatibility
# with the native linker. However, as the warning in the GNU ld
# block says, versions before 2.19.5* couldn't really create working
# shared libraries, regardless of the interface used.
case `$LD -v 2>&1` in
*\ \(GNU\ Binutils\)\ 2.19.5*) ;;
*\ \(GNU\ Binutils\)\ 2.[[2-9]]*) ;;
*\ \(GNU\ Binutils\)\ [[3-9]]*) ;;
*)
lt_use_gnu_ld_interface=yes
;;
esac
;;
*)
lt_use_gnu_ld_interface=yes
;;
esac
fi
if test yes = "$lt_use_gnu_ld_interface"; then
# If archive_cmds runs LD, not CC, wlarc should be empty
wlarc='$wl'
# Set some defaults for GNU ld with shared library support. These
# are reset later if shared libraries are not supported. Putting them
# here allows them to be overridden if necessary.
runpath_var=LD_RUN_PATH
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
_LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic'
# ancient GNU ld didn't support --whole-archive et. al.
if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
_LT_TAGVAR(whole_archive_flag_spec, $1)=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive'
else
_LT_TAGVAR(whole_archive_flag_spec, $1)=
fi
supports_anon_versioning=no
case `$LD -v | $SED -e 's/([^)]\+)\s\+//' 2>&1` in
*GNU\ gold*) supports_anon_versioning=yes ;;
*\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11
*\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
*\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
*\ 2.11.*) ;; # other 2.11 versions
*) supports_anon_versioning=yes ;;
esac
# See if GNU ld supports shared libraries.
case $host_os in
aix[[3-9]]*)
# On AIX/PPC, the GNU linker is very broken
if test ia64 != "$host_cpu"; then
_LT_TAGVAR(ld_shlibs, $1)=no
cat <<_LT_EOF 1>&2
*** Warning: the GNU linker, at least up to release 2.19, is reported
*** to be unable to reliably create shared libraries on AIX.
*** Therefore, libtool is disabling shared libraries support. If you
*** really care for shared libraries, you may want to install binutils
*** 2.20 or above, or modify your PATH so that a non-GNU linker is found.
*** You will then need to restart the configuration process.
_LT_EOF
fi
;;
amigaos*)
case $host_cpu in
powerpc)
# see comment about AmigaOS4 .so support
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)=''
;;
m68k)
_LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
_LT_TAGVAR(hardcode_minus_L, $1)=yes
;;
esac
;;
beos*)
if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
# support --undefined. This deserves some investigation. FIXME
_LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
else
_LT_TAGVAR(ld_shlibs, $1)=no
fi
;;
cygwin* | mingw* | pw32* | cegcc*)
# _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
# as there is no search path for DLLs.
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
_LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-all-symbols'
_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
_LT_TAGVAR(always_export_symbols, $1)=no
_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
_LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols'
_LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname']
if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
# If the export-symbols file already is a .def file, use it as
# is; otherwise, prepend EXPORTS...
_LT_TAGVAR(archive_expsym_cmds, $1)='if _LT_DLL_DEF_P([$export_symbols]); then
cp $export_symbols $output_objdir/$soname.def;
else
echo EXPORTS > $output_objdir/$soname.def;
cat $export_symbols >> $output_objdir/$soname.def;
fi~
$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
else
_LT_TAGVAR(ld_shlibs, $1)=no
fi
;;
haiku*)
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
_LT_TAGVAR(link_all_deplibs, $1)=yes
;;
os2*)
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
_LT_TAGVAR(hardcode_minus_L, $1)=yes
_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
shrext_cmds=.dll
_LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
$ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
$ECHO EXPORTS >> $output_objdir/$libname.def~
emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~
$CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
emximp -o $lib $output_objdir/$libname.def'
_LT_TAGVAR(archive_expsym_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
$ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
$ECHO EXPORTS >> $output_objdir/$libname.def~
prefix_cmds="$SED"~
if test EXPORTS = "`$SED 1q $export_symbols`"; then
prefix_cmds="$prefix_cmds -e 1d";
fi~
prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~
cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~
$CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
emximp -o $lib $output_objdir/$libname.def'
_LT_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def'
_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
;;
interix[[3-9]]*)
_LT_TAGVAR(hardcode_direct, $1)=no
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
_LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
# Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
# Instead, shared libraries are loaded at an image base (0x10000000 by
# default) and relocated if they conflict, which is a slow very memory
# consuming and fragmenting process. To avoid this, we pick a random,
# 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
# time. Moving up from 0x10000000 also allows more sbrk(2) space.
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)='sed "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--retain-symbols-file,$output_objdir/$soname.expsym $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
;;
gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu)
tmp_diet=no
if test linux-dietlibc = "$host_os"; then
case $cc_basename in
diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn)
esac
fi
if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
&& test no = "$tmp_diet"
then
tmp_addflag=' $pic_flag'
tmp_sharedflag='-shared'
case $cc_basename,$host_cpu in
pgcc*) # Portland Group C compiler
_LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
tmp_addflag=' $pic_flag'
;;
pgf77* | pgf90* | pgf95* | pgfortran*)
# Portland Group f77 and f90 compilers
_LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
tmp_addflag=' $pic_flag -Mnomain' ;;
ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64
tmp_addflag=' -i_dynamic' ;;
efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64
tmp_addflag=' -i_dynamic -nofor_main' ;;
ifc* | ifort*) # Intel Fortran compiler
tmp_addflag=' -nofor_main' ;;
lf95*) # Lahey Fortran 8.1
_LT_TAGVAR(whole_archive_flag_spec, $1)=
tmp_sharedflag='--shared' ;;
nagfor*) # NAGFOR 5.3
tmp_sharedflag='-Wl,-shared' ;;
xl[[cC]]* | bgxl[[cC]]* | mpixl[[cC]]*) # IBM XL C 8.0 on PPC (deal with xlf below)
tmp_sharedflag='-qmkshrobj'
tmp_addflag= ;;
nvcc*) # Cuda Compiler Driver 2.2
_LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
_LT_TAGVAR(compiler_needs_object, $1)=yes
;;
esac
case `$CC -V 2>&1 | sed 5q` in
*Sun\ C*) # Sun C 5.9
_LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
_LT_TAGVAR(compiler_needs_object, $1)=yes
tmp_sharedflag='-G' ;;
*Sun\ F*) # Sun Fortran 8.3
tmp_sharedflag='-G' ;;
esac
_LT_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
if test yes = "$supports_anon_versioning"; then
_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
echo "local: *; };" >> $output_objdir/$libname.ver~
$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-version-script $wl$output_objdir/$libname.ver -o $lib'
fi
case $cc_basename in
tcc*)
_LT_TAGVAR(export_dynamic_flag_spec, $1)='-rdynamic'
;;
xlf* | bgf* | bgxlf* | mpixlf*)
# IBM XL Fortran 10.1 on PPC cannot create shared libs itself
_LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience --no-whole-archive'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
_LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib'
if test yes = "$supports_anon_versioning"; then
_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
echo "local: *; };" >> $output_objdir/$libname.ver~
$LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
fi
;;
esac
else
_LT_TAGVAR(ld_shlibs, $1)=no
fi
;;
netbsd*)
if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
_LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
wlarc=
else
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
fi
;;
solaris*)
if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then
_LT_TAGVAR(ld_shlibs, $1)=no
cat <<_LT_EOF 1>&2
*** Warning: The releases 2.8.* of the GNU linker cannot reliably
*** create shared libraries on Solaris systems. Therefore, libtool
*** is disabling shared libraries support. We urge you to upgrade GNU
*** binutils to release 2.9.1 or newer. Another option is to modify
*** your PATH or compiler configuration so that the native linker is
*** used, and then restart.
_LT_EOF
elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
else
_LT_TAGVAR(ld_shlibs, $1)=no
fi
;;
sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
case `$LD -v 2>&1` in
*\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*)
_LT_TAGVAR(ld_shlibs, $1)=no
cat <<_LT_EOF 1>&2
*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 cannot
*** reliably create shared libraries on SCO systems. Therefore, libtool
*** is disabling shared libraries support. We urge you to upgrade GNU
*** binutils to release 2.16.91.0.3 or newer. Another option is to modify
*** your PATH or compiler configuration so that the native linker is
*** used, and then restart.
_LT_EOF
;;
*)
# For security reasons, it is highly recommended that you always
# use absolute paths for naming shared libraries, and exclude the
# DT_RUNPATH tag from executables and libraries. But doing so
# requires that you compile everything twice, which is a pain.
if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
else
_LT_TAGVAR(ld_shlibs, $1)=no
fi
;;
esac
;;
sunos4*)
_LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
wlarc=
_LT_TAGVAR(hardcode_direct, $1)=yes
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
;;
*)
if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
else
_LT_TAGVAR(ld_shlibs, $1)=no
fi
;;
esac
if test no = "$_LT_TAGVAR(ld_shlibs, $1)"; then
runpath_var=
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
_LT_TAGVAR(export_dynamic_flag_spec, $1)=
_LT_TAGVAR(whole_archive_flag_spec, $1)=
fi
else
# PORTME fill in a description of your system's linker (not GNU ld)
case $host_os in
aix3*)
_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
_LT_TAGVAR(always_export_symbols, $1)=yes
_LT_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
# Note: this linker hardcodes the directories in LIBPATH if there
# are no directories specified by -L.
_LT_TAGVAR(hardcode_minus_L, $1)=yes
if test yes = "$GCC" && test -z "$lt_prog_compiler_static"; then
# Neither direct hardcoding nor static linking is supported with a
# broken collect2.
_LT_TAGVAR(hardcode_direct, $1)=unsupported
fi
;;
aix[[4-9]]*)
if test ia64 = "$host_cpu"; then
# On IA64, the linker does run time linking by default, so we don't
# have to do anything special.
aix_use_runtimelinking=no
exp_sym_flag='-Bexport'
no_entry_flag=
else
# If we're using GNU nm, then we don't want the "-C" option.
# -C means demangle to GNU nm, but means don't demangle to AIX nm.
# Without the "-l" option, or with the "-B" option, AIX nm treats
# weak defined symbols like other global defined symbols, whereas
# GNU nm marks them as "W".
# While the 'weak' keyword is ignored in the Export File, we need
# it in the Import File for the 'aix-soname' feature, so we have
# to replace the "-B" option with "-P" for AIX nm.
if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
_LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { if (\$ 2 == "W") { print \$ 3 " weak" } else { print \$ 3 } } }'\'' | sort -u > $export_symbols'
else
_LT_TAGVAR(export_symbols_cmds, $1)='`func_echo_all $NM | $SED -e '\''s/B\([[^B]]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && ([substr](\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols'
fi
aix_use_runtimelinking=no
# Test if we are trying to use run time linking or normal
# AIX style linking. If -brtl is somewhere in LDFLAGS, we
# have runtime linking enabled, and use it for executables.
# For shared libraries, we enable/disable runtime linking
# depending on the kind of the shared library created -
# when "with_aix_soname,aix_use_runtimelinking" is:
# "aix,no" lib.a(lib.so.V) shared, rtl:no, for executables
# "aix,yes" lib.so shared, rtl:yes, for executables
# lib.a static archive
# "both,no" lib.so.V(shr.o) shared, rtl:yes
# lib.a(lib.so.V) shared, rtl:no, for executables
# "both,yes" lib.so.V(shr.o) shared, rtl:yes, for executables
# lib.a(lib.so.V) shared, rtl:no
# "svr4,*" lib.so.V(shr.o) shared, rtl:yes, for executables
# lib.a static archive
case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
for ld_flag in $LDFLAGS; do
if (test x-brtl = "x$ld_flag" || test x-Wl,-brtl = "x$ld_flag"); then
aix_use_runtimelinking=yes
break
fi
done
if test svr4,no = "$with_aix_soname,$aix_use_runtimelinking"; then
# With aix-soname=svr4, we create the lib.so.V shared archives only,
# so we don't have lib.a shared libs to link our executables.
# We have to force runtime linking in this case.
aix_use_runtimelinking=yes
LDFLAGS="$LDFLAGS -Wl,-brtl"
fi
;;
esac
exp_sym_flag='-bexport'
no_entry_flag='-bnoentry'
fi
# When large executables or shared objects are built, AIX ld can
# have problems creating the table of contents. If linking a library
# or program results in "error TOC overflow" add -mminimal-toc to
# CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
# enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
_LT_TAGVAR(archive_cmds, $1)=''
_LT_TAGVAR(hardcode_direct, $1)=yes
_LT_TAGVAR(hardcode_direct_absolute, $1)=yes
_LT_TAGVAR(hardcode_libdir_separator, $1)=':'
_LT_TAGVAR(link_all_deplibs, $1)=yes
_LT_TAGVAR(file_list_spec, $1)='$wl-f,'
case $with_aix_soname,$aix_use_runtimelinking in
aix,*) ;; # traditional, no import file
svr4,* | *,yes) # use import file
# The Import File defines what to hardcode.
_LT_TAGVAR(hardcode_direct, $1)=no
_LT_TAGVAR(hardcode_direct_absolute, $1)=no
;;
esac
if test yes = "$GCC"; then
case $host_os in aix4.[[012]]|aix4.[[012]].*)
# We only want to do this on AIX 4.2 and lower, the check
# below for broken collect2 doesn't work under 4.3+
collect2name=`$CC -print-prog-name=collect2`
if test -f "$collect2name" &&
strings "$collect2name" | $GREP resolve_lib_name >/dev/null
then
# We have reworked collect2
:
else
# We have old collect2
_LT_TAGVAR(hardcode_direct, $1)=unsupported
# It fails to find uninstalled libraries when the uninstalled
# path is not listed in the libpath. Setting hardcode_minus_L
# to unsupported forces relinking
_LT_TAGVAR(hardcode_minus_L, $1)=yes
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=
fi
;;
esac
shared_flag='-shared'
if test yes = "$aix_use_runtimelinking"; then
shared_flag="$shared_flag "'$wl-G'
fi
# Need to ensure runtime linking is disabled for the traditional
# shared library, or the linker may eventually find shared libraries
# /with/ Import File - we do not want to mix them.
shared_flag_aix='-shared'
shared_flag_svr4='-shared $wl-G'
else
# not using gcc
if test ia64 = "$host_cpu"; then
# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
# chokes on -Wl,-G. The following line is correct:
shared_flag='-G'
else
if test yes = "$aix_use_runtimelinking"; then
shared_flag='$wl-G'
else
shared_flag='$wl-bM:SRE'
fi
shared_flag_aix='$wl-bM:SRE'
shared_flag_svr4='$wl-G'
fi
fi
_LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-bexpall'
# It seems that -bexpall does not export symbols beginning with
# underscore (_), so it is better to generate a list of symbols to export.
_LT_TAGVAR(always_export_symbols, $1)=yes
if test aix,yes = "$with_aix_soname,$aix_use_runtimelinking"; then
# Warning - without using the other runtime loading flags (-brtl),
# -berok will link without error, but may produce a broken library.
_LT_TAGVAR(allow_undefined_flag, $1)='-berok'
# Determine the default libpath from the value encoded in an
# empty executable.
_LT_SYS_MODULE_PATH_AIX([$1])
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-blibpath:$libdir:'"$aix_libpath"
_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs $wl'$no_entry_flag' $compiler_flags `if test -n "$allow_undefined_flag"; then func_echo_all "$wl$allow_undefined_flag"; else :; fi` $wl'$exp_sym_flag:\$export_symbols' '$shared_flag
else
if test ia64 = "$host_cpu"; then
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R $libdir:/usr/lib:/lib'
_LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
_LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\$wl$no_entry_flag"' $compiler_flags $wl$allow_undefined_flag '"\$wl$exp_sym_flag:\$export_symbols"
else
# Determine the default libpath from the value encoded in an
# empty executable.
_LT_SYS_MODULE_PATH_AIX([$1])
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-blibpath:$libdir:'"$aix_libpath"
# Warning - without using the other run time loading flags,
# -berok will link without error, but may produce a broken library.
_LT_TAGVAR(no_undefined_flag, $1)=' $wl-bernotok'
_LT_TAGVAR(allow_undefined_flag, $1)=' $wl-berok'
if test yes = "$with_gnu_ld"; then
# We only use this code for GNU lds that support --whole-archive.
_LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive$convenience $wl--no-whole-archive'
else
# Exported symbols can be pulled into shared objects from archives
_LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
fi
_LT_TAGVAR(archive_cmds_need_lc, $1)=yes
_LT_TAGVAR(archive_expsym_cmds, $1)='$RM -r $output_objdir/$realname.d~$MKDIR $output_objdir/$realname.d'
# -brtl affects multiple linker settings, -berok does not and is overridden later
compiler_flags_filtered='`func_echo_all "$compiler_flags " | $SED -e "s%-brtl\\([[, ]]\\)%-berok\\1%g"`'
if test svr4 != "$with_aix_soname"; then
# This is similar to how AIX traditionally builds its shared libraries.
_LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$CC '$shared_flag_aix' -o $output_objdir/$realname.d/$soname $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$realname.d/$soname'
fi
if test aix != "$with_aix_soname"; then
_LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$CC '$shared_flag_svr4' -o $output_objdir/$realname.d/$shared_archive_member_spec.o $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$STRIP -e $output_objdir/$realname.d/$shared_archive_member_spec.o~( func_echo_all "#! $soname($shared_archive_member_spec.o)"; if test shr_64 = "$shared_archive_member_spec"; then func_echo_all "# 64"; else func_echo_all "# 32"; fi; cat $export_symbols ) > $output_objdir/$realname.d/$shared_archive_member_spec.imp~$AR $AR_FLAGS $output_objdir/$soname $output_objdir/$realname.d/$shared_archive_member_spec.o $output_objdir/$realname.d/$shared_archive_member_spec.imp'
else
# used by -dlpreopen to get the symbols
_LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$MV $output_objdir/$realname.d/$soname $output_objdir'
fi
_LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$RM -r $output_objdir/$realname.d'
fi
fi
;;
amigaos*)
case $host_cpu in
powerpc)
# see comment about AmigaOS4 .so support
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)=''
;;
m68k)
_LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
_LT_TAGVAR(hardcode_minus_L, $1)=yes
;;
esac
;;
bsdi[[45]]*)
_LT_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic
;;
cygwin* | mingw* | pw32* | cegcc*)
# When not using gcc, we currently assume that we are using
# Microsoft Visual C++.
# hardcode_libdir_flag_spec is actually meaningless, as there is
# no search path for DLLs.
case $cc_basename in
cl*)
# Native MSVC
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
_LT_TAGVAR(always_export_symbols, $1)=yes
_LT_TAGVAR(file_list_spec, $1)='@'
# Tell ltmain to make .lib files, not .a files.
libext=lib
# Tell ltmain to make .dll files, not .so files.
shrext_cmds=.dll
# FIXME: Setting linknames here is a bad hack.
_LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~linknames='
_LT_TAGVAR(archive_expsym_cmds, $1)='if _LT_DLL_DEF_P([$export_symbols]); then
cp "$export_symbols" "$output_objdir/$soname.def";
echo "$tool_output_objdir$soname.def" > "$output_objdir/$soname.exp";
else
$SED -e '\''s/^/-link -EXPORT:/'\'' < $export_symbols > $output_objdir/$soname.exp;
fi~
$CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
linknames='
# The linker will not automatically build a static lib if we build a DLL.
# _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
_LT_TAGVAR(exclude_expsyms, $1)='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*'
_LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1,DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols'
# Don't use ranlib
_LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib'
_LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~
lt_tool_outputfile="@TOOL_OUTPUT@"~
case $lt_outputfile in
*.exe|*.EXE) ;;
*)
lt_outputfile=$lt_outputfile.exe
lt_tool_outputfile=$lt_tool_outputfile.exe
;;
esac~
if test : != "$MANIFEST_TOOL" && test -f "$lt_outputfile.manifest"; then
$MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
$RM "$lt_outputfile.manifest";
fi'
;;
*)
# Assume MSVC wrapper
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
# Tell ltmain to make .lib files, not .a files.
libext=lib
# Tell ltmain to make .dll files, not .so files.
shrext_cmds=.dll
# FIXME: Setting linknames here is a bad hack.
_LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
# The linker will automatically build a .lib file if we build a DLL.
_LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
# FIXME: Should let the user specify the lib program.
_LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs'
_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
;;
esac
;;
darwin* | rhapsody*)
_LT_DARWIN_LINKER_FEATURES($1)
;;
dgux*)
_LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
;;
# FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
# support. Future versions do this automatically, but an explicit c++rt0.o
# does not break anything, and helps significantly (at the cost of a little
# extra space).
freebsd2.2*)
_LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
_LT_TAGVAR(hardcode_direct, $1)=yes
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
;;
# Unfortunately, older versions of FreeBSD 2 do not have this feature.
freebsd2.*)
_LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
_LT_TAGVAR(hardcode_direct, $1)=yes
_LT_TAGVAR(hardcode_minus_L, $1)=yes
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
;;
# FreeBSD 3 and greater uses gcc -shared to do shared libraries.
freebsd* | dragonfly*)
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
_LT_TAGVAR(hardcode_direct, $1)=yes
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
;;
hpux9*)
if test yes = "$GCC"; then
_LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared $pic_flag $wl+b $wl$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib'
else
_LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib'
fi
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
_LT_TAGVAR(hardcode_direct, $1)=yes
# hardcode_minus_L: Not really in the search PATH,
# but as the default location of the library.
_LT_TAGVAR(hardcode_minus_L, $1)=yes
_LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
;;
hpux10*)
if test yes,no = "$GCC,$with_gnu_ld"; then
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
else
_LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
fi
if test no = "$with_gnu_ld"; then
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
_LT_TAGVAR(hardcode_direct, $1)=yes
_LT_TAGVAR(hardcode_direct_absolute, $1)=yes
_LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
# hardcode_minus_L: Not really in the search PATH,
# but as the default location of the library.
_LT_TAGVAR(hardcode_minus_L, $1)=yes
fi
;;
hpux11*)
if test yes,no = "$GCC,$with_gnu_ld"; then
case $host_cpu in
hppa*64*)
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags'
;;
ia64*)
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
;;
*)
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
;;
esac
else
case $host_cpu in
hppa*64*)
_LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags'
;;
ia64*)
_LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
;;
*)
m4_if($1, [], [
# Older versions of the 11.00 compiler do not understand -b yet
# (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does)
_LT_LINKER_OPTION([if $CC understands -b],
_LT_TAGVAR(lt_cv_prog_compiler__b, $1), [-b],
[_LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'],
[_LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'])],
[_LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'])
;;
esac
fi
if test no = "$with_gnu_ld"; then
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
case $host_cpu in
hppa*64*|ia64*)
_LT_TAGVAR(hardcode_direct, $1)=no
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
;;
*)
_LT_TAGVAR(hardcode_direct, $1)=yes
_LT_TAGVAR(hardcode_direct_absolute, $1)=yes
_LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
# hardcode_minus_L: Not really in the search PATH,
# but as the default location of the library.
_LT_TAGVAR(hardcode_minus_L, $1)=yes
;;
esac
fi
;;
irix5* | irix6* | nonstopux*)
if test yes = "$GCC"; then
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
# Try to use the -exported_symbol ld option, if it does not
# work, assume that -exports_file does not work either and
# implicitly export all symbols.
# This should be the same for all languages, so no per-tag cache variable.
AC_CACHE_CHECK([whether the $host_os linker accepts -exported_symbol],
[lt_cv_irix_exported_symbol],
[save_LDFLAGS=$LDFLAGS
LDFLAGS="$LDFLAGS -shared $wl-exported_symbol ${wl}foo $wl-update_registry $wl/dev/null"
AC_LINK_IFELSE(
[AC_LANG_SOURCE(
[AC_LANG_CASE([C], [[int foo (void) { return 0; }]],
[C++], [[int foo (void) { return 0; }]],
[Fortran 77], [[
subroutine foo
end]],
[Fortran], [[
subroutine foo
end]])])],
[lt_cv_irix_exported_symbol=yes],
[lt_cv_irix_exported_symbol=no])
LDFLAGS=$save_LDFLAGS])
if test yes = "$lt_cv_irix_exported_symbol"; then
_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations $wl-exports_file $wl$export_symbols -o $lib'
fi
else
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -exports_file $export_symbols -o $lib'
fi
_LT_TAGVAR(archive_cmds_need_lc, $1)='no'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
_LT_TAGVAR(inherit_rpath, $1)=yes
_LT_TAGVAR(link_all_deplibs, $1)=yes
;;
linux*)
case $cc_basename in
tcc*)
# Fabrice Bellard et al's Tiny C Compiler
_LT_TAGVAR(ld_shlibs, $1)=yes
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
;;
esac
;;
netbsd*)
if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
_LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
else
_LT_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF
fi
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
_LT_TAGVAR(hardcode_direct, $1)=yes
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
;;
newsos6)
_LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
_LT_TAGVAR(hardcode_direct, $1)=yes
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
;;
*nto* | *qnx*)
;;
openbsd* | bitrig*)
if test -f /usr/libexec/ld.so; then
_LT_TAGVAR(hardcode_direct, $1)=yes
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
_LT_TAGVAR(hardcode_direct_absolute, $1)=yes
if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags $wl-retain-symbols-file,$export_symbols'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
_LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
else
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
fi
else
_LT_TAGVAR(ld_shlibs, $1)=no
fi
;;
os2*)
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
_LT_TAGVAR(hardcode_minus_L, $1)=yes
_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
shrext_cmds=.dll
_LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
$ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
$ECHO EXPORTS >> $output_objdir/$libname.def~
emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~
$CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
emximp -o $lib $output_objdir/$libname.def'
_LT_TAGVAR(archive_expsym_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
$ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
$ECHO EXPORTS >> $output_objdir/$libname.def~
prefix_cmds="$SED"~
if test EXPORTS = "`$SED 1q $export_symbols`"; then
prefix_cmds="$prefix_cmds -e 1d";
fi~
prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~
cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~
$CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
emximp -o $lib $output_objdir/$libname.def'
_LT_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def'
_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
;;
osf3*)
if test yes = "$GCC"; then
_LT_TAGVAR(allow_undefined_flag, $1)=' $wl-expect_unresolved $wl\*'
_LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
else
_LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
_LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
fi
_LT_TAGVAR(archive_cmds_need_lc, $1)='no'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
;;
osf4* | osf5*) # as osf3* with the addition of -msym flag
if test yes = "$GCC"; then
_LT_TAGVAR(allow_undefined_flag, $1)=' $wl-expect_unresolved $wl\*'
_LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $pic_flag $libobjs $deplibs $compiler_flags $wl-msym $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
else
_LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
_LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
$CC -shared$allow_undefined_flag $wl-input $wl$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib~$RM $lib.exp'
# Both c and cxx compiler support -rpath directly
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
fi
_LT_TAGVAR(archive_cmds_need_lc, $1)='no'
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
;;
solaris*)
_LT_TAGVAR(no_undefined_flag, $1)=' -z defs'
if test yes = "$GCC"; then
wlarc='$wl'
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $wl-z ${wl}text $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags'
_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
$CC -shared $pic_flag $wl-z ${wl}text $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
else
case `$CC -V 2>&1` in
*"Compilers 5.0"*)
wlarc=''
_LT_TAGVAR(archive_cmds, $1)='$LD -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $linker_flags'
_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
$LD -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
;;
*)
wlarc='$wl'
_LT_TAGVAR(archive_cmds, $1)='$CC -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $compiler_flags'
_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
$CC -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
;;
esac
fi
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
case $host_os in
solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
*)
# The compiler driver will combine and reorder linker options,
# but understands '-z linker_flag'. GCC discards it without '$wl',
# but is careful enough not to reorder.
# Supported since Solaris 2.6 (maybe 2.5.1?)
if test yes = "$GCC"; then
_LT_TAGVAR(whole_archive_flag_spec, $1)='$wl-z ${wl}allextract$convenience $wl-z ${wl}defaultextract'
else
_LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
fi
;;
esac
_LT_TAGVAR(link_all_deplibs, $1)=yes
;;
sunos4*)
if test sequent = "$host_vendor"; then
# Use $CC to link under sequent, because it throws in some extra .o
# files that make .init and .fini sections work.
_LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h $soname -o $lib $libobjs $deplibs $compiler_flags'
else
_LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
fi
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
_LT_TAGVAR(hardcode_direct, $1)=yes
_LT_TAGVAR(hardcode_minus_L, $1)=yes
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
;;
sysv4)
case $host_vendor in
sni)
_LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
_LT_TAGVAR(hardcode_direct, $1)=yes # is this really true???
;;
siemens)
## LD is ld it makes a PLAMLIB
## CC just makes a GrossModule.
_LT_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags'
_LT_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs'
_LT_TAGVAR(hardcode_direct, $1)=no
;;
motorola)
_LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
_LT_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie
;;
esac
runpath_var='LD_RUN_PATH'
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
;;
sysv4.3*)
_LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
_LT_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport'
;;
sysv4*MP*)
if test -d /usr/nec; then
_LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
runpath_var=LD_RUN_PATH
hardcode_runpath_var=yes
_LT_TAGVAR(ld_shlibs, $1)=yes
fi
;;
sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
_LT_TAGVAR(no_undefined_flag, $1)='$wl-z,text'
_LT_TAGVAR(archive_cmds_need_lc, $1)=no
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
runpath_var='LD_RUN_PATH'
if test yes = "$GCC"; then
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
else
_LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
fi
;;
sysv5* | sco3.2v5* | sco5v6*)
# Note: We CANNOT use -z defs as we might desire, because we do not
# link with -lc, and that would cause any symbols used from libc to
# always be unresolved, which means just about no library would
# ever link correctly. If we're not using GNU ld we use -z text
# though, which does catch some bad symbols but isn't as heavy-handed
# as -z defs.
_LT_TAGVAR(no_undefined_flag, $1)='$wl-z,text'
_LT_TAGVAR(allow_undefined_flag, $1)='$wl-z,nodefs'
_LT_TAGVAR(archive_cmds_need_lc, $1)=no
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R,$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=':'
_LT_TAGVAR(link_all_deplibs, $1)=yes
_LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-Bexport'
runpath_var='LD_RUN_PATH'
if test yes = "$GCC"; then
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
else
_LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
fi
;;
uts4*)
_LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
;;
*)
_LT_TAGVAR(ld_shlibs, $1)=no
;;
esac
if test sni = "$host_vendor"; then
case $host in
sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
_LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-Blargedynsym'
;;
esac
fi
fi
])
AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)])
test no = "$_LT_TAGVAR(ld_shlibs, $1)" && can_build_shared=no
_LT_TAGVAR(with_gnu_ld, $1)=$with_gnu_ld
_LT_DECL([], [libext], [0], [Old archive suffix (normally "a")])dnl
_LT_DECL([], [shrext_cmds], [1], [Shared library suffix (normally ".so")])dnl
_LT_DECL([], [extract_expsyms_cmds], [2],
[The commands to extract the exported symbol list from a shared archive])
#
# Do we need to explicitly link libc?
#
case "x$_LT_TAGVAR(archive_cmds_need_lc, $1)" in
x|xyes)
# Assume -lc should be added
_LT_TAGVAR(archive_cmds_need_lc, $1)=yes
if test yes,yes = "$GCC,$enable_shared"; then
case $_LT_TAGVAR(archive_cmds, $1) in
*'~'*)
# FIXME: we may have to deal with multi-command sequences.
;;
'$CC '*)
# Test whether the compiler implicitly links with -lc since on some
# systems, -lgcc has to come before -lc. If gcc already passes -lc
# to ld, don't add -lc before -lgcc.
AC_CACHE_CHECK([whether -lc should be explicitly linked in],
[lt_cv_]_LT_TAGVAR(archive_cmds_need_lc, $1),
[$RM conftest*
echo "$lt_simple_compile_test_code" > conftest.$ac_ext
if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
soname=conftest
lib=conftest
libobjs=conftest.$ac_objext
deplibs=
wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1)
pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1)
compiler_flags=-v
linker_flags=-v
verstring=
output_objdir=.
libname=conftest
lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1)
_LT_TAGVAR(allow_undefined_flag, $1)=
if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1)
then
lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=no
else
lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=yes
fi
_LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag
else
cat conftest.err 1>&5
fi
$RM conftest*
])
_LT_TAGVAR(archive_cmds_need_lc, $1)=$lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)
;;
esac
fi
;;
esac
_LT_TAGDECL([build_libtool_need_lc], [archive_cmds_need_lc], [0],
[Whether or not to add -lc for building shared libraries])
_LT_TAGDECL([allow_libtool_libs_with_static_runtimes],
[enable_shared_with_static_runtimes], [0],
[Whether or not to disallow shared libs when runtime libs are static])
_LT_TAGDECL([], [export_dynamic_flag_spec], [1],
[Compiler flag to allow reflexive dlopens])
_LT_TAGDECL([], [whole_archive_flag_spec], [1],
[Compiler flag to generate shared objects directly from archives])
_LT_TAGDECL([], [compiler_needs_object], [1],
[Whether the compiler copes with passing no objects directly])
_LT_TAGDECL([], [old_archive_from_new_cmds], [2],
[Create an old-style archive from a shared archive])
_LT_TAGDECL([], [old_archive_from_expsyms_cmds], [2],
[Create a temporary old-style archive to link instead of a shared archive])
_LT_TAGDECL([], [archive_cmds], [2], [Commands used to build a shared archive])
_LT_TAGDECL([], [archive_expsym_cmds], [2])
_LT_TAGDECL([], [module_cmds], [2],
[Commands used to build a loadable module if different from building
a shared archive.])
_LT_TAGDECL([], [module_expsym_cmds], [2])
_LT_TAGDECL([], [with_gnu_ld], [1],
[Whether we are building with GNU ld or not])
_LT_TAGDECL([], [allow_undefined_flag], [1],
[Flag that allows shared libraries with undefined symbols to be built])
_LT_TAGDECL([], [no_undefined_flag], [1],
[Flag that enforces no undefined symbols])
_LT_TAGDECL([], [hardcode_libdir_flag_spec], [1],
[Flag to hardcode $libdir into a binary during linking.
This must work even if $libdir does not exist])
_LT_TAGDECL([], [hardcode_libdir_separator], [1],
[Whether we need a single "-rpath" flag with a separated argument])
_LT_TAGDECL([], [hardcode_direct], [0],
[Set to "yes" if using DIR/libNAME$shared_ext during linking hardcodes
DIR into the resulting binary])
_LT_TAGDECL([], [hardcode_direct_absolute], [0],
[Set to "yes" if using DIR/libNAME$shared_ext during linking hardcodes
DIR into the resulting binary and the resulting library dependency is
"absolute", i.e impossible to change by setting $shlibpath_var if the
library is relocated])
_LT_TAGDECL([], [hardcode_minus_L], [0],
[Set to "yes" if using the -LDIR flag during linking hardcodes DIR
into the resulting binary])
_LT_TAGDECL([], [hardcode_shlibpath_var], [0],
[Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
into the resulting binary])
_LT_TAGDECL([], [hardcode_automatic], [0],
[Set to "yes" if building a shared library automatically hardcodes DIR
into the library and all subsequent libraries and executables linked
against it])
_LT_TAGDECL([], [inherit_rpath], [0],
[Set to yes if linker adds runtime paths of dependent libraries
to runtime path list])
_LT_TAGDECL([], [link_all_deplibs], [0],
[Whether libtool must link a program against all its dependency libraries])
_LT_TAGDECL([], [always_export_symbols], [0],
[Set to "yes" if exported symbols are required])
_LT_TAGDECL([], [export_symbols_cmds], [2],
[The commands to list exported symbols])
_LT_TAGDECL([], [exclude_expsyms], [1],
[Symbols that should not be listed in the preloaded symbols])
_LT_TAGDECL([], [include_expsyms], [1],
[Symbols that must always be exported])
_LT_TAGDECL([], [prelink_cmds], [2],
[Commands necessary for linking programs (against libraries) with templates])
_LT_TAGDECL([], [postlink_cmds], [2],
[Commands necessary for finishing linking programs])
_LT_TAGDECL([], [file_list_spec], [1],
[Specify filename containing input files])
dnl FIXME: Not yet implemented
dnl _LT_TAGDECL([], [thread_safe_flag_spec], [1],
dnl [Compiler flag to generate thread safe objects])
])# _LT_LINKER_SHLIBS
# _LT_LANG_C_CONFIG([TAG])
# ------------------------
# Ensure that the configuration variables for a C compiler are suitably
# defined. These variables are subsequently used by _LT_CONFIG to write
# the compiler configuration to 'libtool'.
m4_defun([_LT_LANG_C_CONFIG],
[m4_require([_LT_DECL_EGREP])dnl
lt_save_CC=$CC
AC_LANG_PUSH(C)
# Source file extension for C test sources.
ac_ext=c
# Object file extension for compiled C test sources.
objext=o
_LT_TAGVAR(objext, $1)=$objext
# Code to be used in simple compile tests
lt_simple_compile_test_code="int some_variable = 0;"
# Code to be used in simple link tests
lt_simple_link_test_code='int main(){return(0);}'
_LT_TAG_COMPILER
# Save the default compiler, since it gets overwritten when the other
# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP.
compiler_DEFAULT=$CC
# save warnings/boilerplate of simple test code
_LT_COMPILER_BOILERPLATE
_LT_LINKER_BOILERPLATE
## CAVEAT EMPTOR:
## There is no encapsulation within the following macros, do not change
## the running order or otherwise move them around unless you know exactly
## what you are doing...
if test -n "$compiler"; then
_LT_COMPILER_NO_RTTI($1)
_LT_COMPILER_PIC($1)
_LT_COMPILER_C_O($1)
_LT_COMPILER_FILE_LOCKS($1)
_LT_LINKER_SHLIBS($1)
_LT_SYS_DYNAMIC_LINKER($1)
_LT_LINKER_HARDCODE_LIBPATH($1)
LT_SYS_DLOPEN_SELF
_LT_CMD_STRIPLIB
# Report what library types will actually be built
AC_MSG_CHECKING([if libtool supports shared libraries])
AC_MSG_RESULT([$can_build_shared])
AC_MSG_CHECKING([whether to build shared libraries])
test no = "$can_build_shared" && enable_shared=no
# On AIX, shared libraries and static libraries use the same namespace, and
# are all built from PIC.
case $host_os in
aix3*)
test yes = "$enable_shared" && enable_static=no
if test -n "$RANLIB"; then
archive_cmds="$archive_cmds~\$RANLIB \$lib"
postinstall_cmds='$RANLIB $lib'
fi
;;
aix[[4-9]]*)
if test ia64 != "$host_cpu"; then
case $enable_shared,$with_aix_soname,$aix_use_runtimelinking in
yes,aix,yes) ;; # shared object as lib.so file only
yes,svr4,*) ;; # shared object as lib.so archive member only
yes,*) enable_static=no ;; # shared object in lib.a archive as well
esac
fi
;;
esac
AC_MSG_RESULT([$enable_shared])
AC_MSG_CHECKING([whether to build static libraries])
# Make sure either enable_shared or enable_static is yes.
test yes = "$enable_shared" || enable_static=yes
AC_MSG_RESULT([$enable_static])
_LT_CONFIG($1)
fi
AC_LANG_POP
CC=$lt_save_CC
])# _LT_LANG_C_CONFIG
# _LT_LANG_CXX_CONFIG([TAG])
# --------------------------
# Ensure that the configuration variables for a C++ compiler are suitably
# defined. These variables are subsequently used by _LT_CONFIG to write
# the compiler configuration to 'libtool'.
m4_defun([_LT_LANG_CXX_CONFIG],
[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
m4_require([_LT_DECL_EGREP])dnl
m4_require([_LT_PATH_MANIFEST_TOOL])dnl
if test -n "$CXX" && ( test no != "$CXX" &&
( (test g++ = "$CXX" && `g++ -v >/dev/null 2>&1` ) ||
(test g++ != "$CXX"))); then
AC_PROG_CXXCPP
else
_lt_caught_CXX_error=yes
fi
AC_LANG_PUSH(C++)
_LT_TAGVAR(archive_cmds_need_lc, $1)=no
_LT_TAGVAR(allow_undefined_flag, $1)=
_LT_TAGVAR(always_export_symbols, $1)=no
_LT_TAGVAR(archive_expsym_cmds, $1)=
_LT_TAGVAR(compiler_needs_object, $1)=no
_LT_TAGVAR(export_dynamic_flag_spec, $1)=
_LT_TAGVAR(hardcode_direct, $1)=no
_LT_TAGVAR(hardcode_direct_absolute, $1)=no
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
_LT_TAGVAR(hardcode_libdir_separator, $1)=
_LT_TAGVAR(hardcode_minus_L, $1)=no
_LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
_LT_TAGVAR(hardcode_automatic, $1)=no
_LT_TAGVAR(inherit_rpath, $1)=no
_LT_TAGVAR(module_cmds, $1)=
_LT_TAGVAR(module_expsym_cmds, $1)=
_LT_TAGVAR(link_all_deplibs, $1)=unknown
_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
_LT_TAGVAR(reload_flag, $1)=$reload_flag
_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
_LT_TAGVAR(no_undefined_flag, $1)=
_LT_TAGVAR(whole_archive_flag_spec, $1)=
_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
# Source file extension for C++ test sources.
ac_ext=cpp
# Object file extension for compiled C++ test sources.
objext=o
_LT_TAGVAR(objext, $1)=$objext
# No sense in running all these tests if we already determined that
# the CXX compiler isn't working. Some variables (like enable_shared)
# are currently assumed to apply to all compilers on this platform,
# and will be corrupted by setting them based on a non-working compiler.
if test yes != "$_lt_caught_CXX_error"; then
# Code to be used in simple compile tests
lt_simple_compile_test_code="int some_variable = 0;"
# Code to be used in simple link tests
lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }'
# ltmain only uses $CC for tagged configurations so make sure $CC is set.
_LT_TAG_COMPILER
# save warnings/boilerplate of simple test code
_LT_COMPILER_BOILERPLATE
_LT_LINKER_BOILERPLATE
# Allow CC to be a program name with arguments.
lt_save_CC=$CC
lt_save_CFLAGS=$CFLAGS
lt_save_LD=$LD
lt_save_GCC=$GCC
GCC=$GXX
lt_save_with_gnu_ld=$with_gnu_ld
lt_save_path_LD=$lt_cv_path_LD
if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
else
$as_unset lt_cv_prog_gnu_ld
fi
if test -n "${lt_cv_path_LDCXX+set}"; then
lt_cv_path_LD=$lt_cv_path_LDCXX
else
$as_unset lt_cv_path_LD
fi
test -z "${LDCXX+set}" || LD=$LDCXX
CC=${CXX-"c++"}
CFLAGS=$CXXFLAGS
compiler=$CC
_LT_TAGVAR(compiler, $1)=$CC
_LT_CC_BASENAME([$compiler])
if test -n "$compiler"; then
# We don't want -fno-exception when compiling C++ code, so set the
# no_builtin_flag separately
if test yes = "$GXX"; then
_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
else
_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
fi
if test yes = "$GXX"; then
# Set up default GNU C++ configuration
LT_PATH_LD
# Check if GNU C++ uses GNU ld as the underlying linker, since the
# archiving commands below assume that GNU ld is being used.
if test yes = "$with_gnu_ld"; then
_LT_TAGVAR(archive_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
_LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic'
# If archive_cmds runs LD, not CC, wlarc should be empty
# XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
# investigate it a little bit more. (MM)
wlarc='$wl'
# ancient GNU ld didn't support --whole-archive et. al.
if eval "`$CC -print-prog-name=ld` --help 2>&1" |
$GREP 'no-whole-archive' > /dev/null; then
_LT_TAGVAR(whole_archive_flag_spec, $1)=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive'
else
_LT_TAGVAR(whole_archive_flag_spec, $1)=
fi
else
with_gnu_ld=no
wlarc=
# A generic and very simple default shared library creation
# command for GNU C++ for the case where it uses the native
# linker, instead of GNU ld. If possible, this setting should
# overridden to take advantage of the native linker features on
# the platform it is being used on.
_LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
fi
# Commands to make compiler produce verbose output that lists
# what "hidden" libraries, object files and flags are used when
# linking a shared library.
output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
else
GXX=no
with_gnu_ld=no
wlarc=
fi
# PORTME: fill in a description of your system's C++ link characteristics
AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
_LT_TAGVAR(ld_shlibs, $1)=yes
case $host_os in
aix3*)
# FIXME: insert proper C++ library support
_LT_TAGVAR(ld_shlibs, $1)=no
;;
aix[[4-9]]*)
if test ia64 = "$host_cpu"; then
# On IA64, the linker does run time linking by default, so we don't
# have to do anything special.
aix_use_runtimelinking=no
exp_sym_flag='-Bexport'
no_entry_flag=
else
aix_use_runtimelinking=no
# Test if we are trying to use run time linking or normal
# AIX style linking. If -brtl is somewhere in LDFLAGS, we
# have runtime linking enabled, and use it for executables.
# For shared libraries, we enable/disable runtime linking
# depending on the kind of the shared library created -
# when "with_aix_soname,aix_use_runtimelinking" is:
# "aix,no" lib.a(lib.so.V) shared, rtl:no, for executables
# "aix,yes" lib.so shared, rtl:yes, for executables
# lib.a static archive
# "both,no" lib.so.V(shr.o) shared, rtl:yes
# lib.a(lib.so.V) shared, rtl:no, for executables
# "both,yes" lib.so.V(shr.o) shared, rtl:yes, for executables
# lib.a(lib.so.V) shared, rtl:no
# "svr4,*" lib.so.V(shr.o) shared, rtl:yes, for executables
# lib.a static archive
case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
for ld_flag in $LDFLAGS; do
case $ld_flag in
*-brtl*)
aix_use_runtimelinking=yes
break
;;
esac
done
if test svr4,no = "$with_aix_soname,$aix_use_runtimelinking"; then
# With aix-soname=svr4, we create the lib.so.V shared archives only,
# so we don't have lib.a shared libs to link our executables.
# We have to force runtime linking in this case.
aix_use_runtimelinking=yes
LDFLAGS="$LDFLAGS -Wl,-brtl"
fi
;;
esac
exp_sym_flag='-bexport'
no_entry_flag='-bnoentry'
fi
# When large executables or shared objects are built, AIX ld can
# have problems creating the table of contents. If linking a library
# or program results in "error TOC overflow" add -mminimal-toc to
# CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
# enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
_LT_TAGVAR(archive_cmds, $1)=''
_LT_TAGVAR(hardcode_direct, $1)=yes
_LT_TAGVAR(hardcode_direct_absolute, $1)=yes
_LT_TAGVAR(hardcode_libdir_separator, $1)=':'
_LT_TAGVAR(link_all_deplibs, $1)=yes
_LT_TAGVAR(file_list_spec, $1)='$wl-f,'
case $with_aix_soname,$aix_use_runtimelinking in
aix,*) ;; # no import file
svr4,* | *,yes) # use import file
# The Import File defines what to hardcode.
_LT_TAGVAR(hardcode_direct, $1)=no
_LT_TAGVAR(hardcode_direct_absolute, $1)=no
;;
esac
if test yes = "$GXX"; then
case $host_os in aix4.[[012]]|aix4.[[012]].*)
# We only want to do this on AIX 4.2 and lower, the check
# below for broken collect2 doesn't work under 4.3+
collect2name=`$CC -print-prog-name=collect2`
if test -f "$collect2name" &&
strings "$collect2name" | $GREP resolve_lib_name >/dev/null
then
# We have reworked collect2
:
else
# We have old collect2
_LT_TAGVAR(hardcode_direct, $1)=unsupported
# It fails to find uninstalled libraries when the uninstalled
# path is not listed in the libpath. Setting hardcode_minus_L
# to unsupported forces relinking
_LT_TAGVAR(hardcode_minus_L, $1)=yes
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=
fi
esac
shared_flag='-shared'
if test yes = "$aix_use_runtimelinking"; then
shared_flag=$shared_flag' $wl-G'
fi
# Need to ensure runtime linking is disabled for the traditional
# shared library, or the linker may eventually find shared libraries
# /with/ Import File - we do not want to mix them.
shared_flag_aix='-shared'
shared_flag_svr4='-shared $wl-G'
else
# not using gcc
if test ia64 = "$host_cpu"; then
# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
# chokes on -Wl,-G. The following line is correct:
shared_flag='-G'
else
if test yes = "$aix_use_runtimelinking"; then
shared_flag='$wl-G'
else
shared_flag='$wl-bM:SRE'
fi
shared_flag_aix='$wl-bM:SRE'
shared_flag_svr4='$wl-G'
fi
fi
_LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-bexpall'
# It seems that -bexpall does not export symbols beginning with
# underscore (_), so it is better to generate a list of symbols to
# export.
_LT_TAGVAR(always_export_symbols, $1)=yes
if test aix,yes = "$with_aix_soname,$aix_use_runtimelinking"; then
# Warning - without using the other runtime loading flags (-brtl),
# -berok will link without error, but may produce a broken library.
# The "-G" linker flag allows undefined symbols.
_LT_TAGVAR(no_undefined_flag, $1)='-bernotok'
# Determine the default libpath from the value encoded in an empty
# executable.
_LT_SYS_MODULE_PATH_AIX([$1])
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-blibpath:$libdir:'"$aix_libpath"
_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs $wl'$no_entry_flag' $compiler_flags `if test -n "$allow_undefined_flag"; then func_echo_all "$wl$allow_undefined_flag"; else :; fi` $wl'$exp_sym_flag:\$export_symbols' '$shared_flag
else
if test ia64 = "$host_cpu"; then
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R $libdir:/usr/lib:/lib'
_LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
_LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\$wl$no_entry_flag"' $compiler_flags $wl$allow_undefined_flag '"\$wl$exp_sym_flag:\$export_symbols"
else
# Determine the default libpath from the value encoded in an
# empty executable.
_LT_SYS_MODULE_PATH_AIX([$1])
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-blibpath:$libdir:'"$aix_libpath"
# Warning - without using the other run time loading flags,
# -berok will link without error, but may produce a broken library.
_LT_TAGVAR(no_undefined_flag, $1)=' $wl-bernotok'
_LT_TAGVAR(allow_undefined_flag, $1)=' $wl-berok'
if test yes = "$with_gnu_ld"; then
# We only use this code for GNU lds that support --whole-archive.
_LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive$convenience $wl--no-whole-archive'
else
# Exported symbols can be pulled into shared objects from archives
_LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
fi
_LT_TAGVAR(archive_cmds_need_lc, $1)=yes
_LT_TAGVAR(archive_expsym_cmds, $1)='$RM -r $output_objdir/$realname.d~$MKDIR $output_objdir/$realname.d'
# -brtl affects multiple linker settings, -berok does not and is overridden later
compiler_flags_filtered='`func_echo_all "$compiler_flags " | $SED -e "s%-brtl\\([[, ]]\\)%-berok\\1%g"`'
if test svr4 != "$with_aix_soname"; then
# This is similar to how AIX traditionally builds its shared
# libraries. Need -bnortl late, we may have -brtl in LDFLAGS.
_LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$CC '$shared_flag_aix' -o $output_objdir/$realname.d/$soname $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$realname.d/$soname'
fi
if test aix != "$with_aix_soname"; then
_LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$CC '$shared_flag_svr4' -o $output_objdir/$realname.d/$shared_archive_member_spec.o $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$STRIP -e $output_objdir/$realname.d/$shared_archive_member_spec.o~( func_echo_all "#! $soname($shared_archive_member_spec.o)"; if test shr_64 = "$shared_archive_member_spec"; then func_echo_all "# 64"; else func_echo_all "# 32"; fi; cat $export_symbols ) > $output_objdir/$realname.d/$shared_archive_member_spec.imp~$AR $AR_FLAGS $output_objdir/$soname $output_objdir/$realname.d/$shared_archive_member_spec.o $output_objdir/$realname.d/$shared_archive_member_spec.imp'
else
# used by -dlpreopen to get the symbols
_LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$MV $output_objdir/$realname.d/$soname $output_objdir'
fi
_LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$RM -r $output_objdir/$realname.d'
fi
fi
;;
beos*)
if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
# support --undefined. This deserves some investigation. FIXME
_LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
else
_LT_TAGVAR(ld_shlibs, $1)=no
fi
;;
chorus*)
case $cc_basename in
*)
# FIXME: insert proper C++ library support
_LT_TAGVAR(ld_shlibs, $1)=no
;;
esac
;;
cygwin* | mingw* | pw32* | cegcc*)
case $GXX,$cc_basename in
,cl* | no,cl*)
# Native MSVC
# hardcode_libdir_flag_spec is actually meaningless, as there is
# no search path for DLLs.
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
_LT_TAGVAR(always_export_symbols, $1)=yes
_LT_TAGVAR(file_list_spec, $1)='@'
# Tell ltmain to make .lib files, not .a files.
libext=lib
# Tell ltmain to make .dll files, not .so files.
shrext_cmds=.dll
# FIXME: Setting linknames here is a bad hack.
_LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~linknames='
_LT_TAGVAR(archive_expsym_cmds, $1)='if _LT_DLL_DEF_P([$export_symbols]); then
cp "$export_symbols" "$output_objdir/$soname.def";
echo "$tool_output_objdir$soname.def" > "$output_objdir/$soname.exp";
else
$SED -e '\''s/^/-link -EXPORT:/'\'' < $export_symbols > $output_objdir/$soname.exp;
fi~
$CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
linknames='
# The linker will not automatically build a static lib if we build a DLL.
# _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
# Don't use ranlib
_LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib'
_LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~
lt_tool_outputfile="@TOOL_OUTPUT@"~
case $lt_outputfile in
*.exe|*.EXE) ;;
*)
lt_outputfile=$lt_outputfile.exe
lt_tool_outputfile=$lt_tool_outputfile.exe
;;
esac~
func_to_tool_file "$lt_outputfile"~
if test : != "$MANIFEST_TOOL" && test -f "$lt_outputfile.manifest"; then
$MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
$RM "$lt_outputfile.manifest";
fi'
;;
*)
# g++
# _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
# as there is no search path for DLLs.
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
_LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-all-symbols'
_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
_LT_TAGVAR(always_export_symbols, $1)=no
_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
_LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
# If the export-symbols file already is a .def file, use it as
# is; otherwise, prepend EXPORTS...
_LT_TAGVAR(archive_expsym_cmds, $1)='if _LT_DLL_DEF_P([$export_symbols]); then
cp $export_symbols $output_objdir/$soname.def;
else
echo EXPORTS > $output_objdir/$soname.def;
cat $export_symbols >> $output_objdir/$soname.def;
fi~
$CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
else
_LT_TAGVAR(ld_shlibs, $1)=no
fi
;;
esac
;;
darwin* | rhapsody*)
_LT_DARWIN_LINKER_FEATURES($1)
;;
os2*)
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
_LT_TAGVAR(hardcode_minus_L, $1)=yes
_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
shrext_cmds=.dll
_LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
$ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
$ECHO EXPORTS >> $output_objdir/$libname.def~
emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~
$CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
emximp -o $lib $output_objdir/$libname.def'
_LT_TAGVAR(archive_expsym_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
$ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
$ECHO EXPORTS >> $output_objdir/$libname.def~
prefix_cmds="$SED"~
if test EXPORTS = "`$SED 1q $export_symbols`"; then
prefix_cmds="$prefix_cmds -e 1d";
fi~
prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~
cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~
$CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
emximp -o $lib $output_objdir/$libname.def'
_LT_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def'
_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
;;
dgux*)
case $cc_basename in
ec++*)
# FIXME: insert proper C++ library support
_LT_TAGVAR(ld_shlibs, $1)=no
;;
ghcx*)
# Green Hills C++ Compiler
# FIXME: insert proper C++ library support
_LT_TAGVAR(ld_shlibs, $1)=no
;;
*)
# FIXME: insert proper C++ library support
_LT_TAGVAR(ld_shlibs, $1)=no
;;
esac
;;
freebsd2.*)
# C++ shared libraries reported to be fairly broken before
# switch to ELF
_LT_TAGVAR(ld_shlibs, $1)=no
;;
freebsd-elf*)
_LT_TAGVAR(archive_cmds_need_lc, $1)=no
;;
freebsd* | dragonfly*)
# FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
# conventions
_LT_TAGVAR(ld_shlibs, $1)=yes
;;
haiku*)
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
_LT_TAGVAR(link_all_deplibs, $1)=yes
;;
hpux9*)
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
_LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
_LT_TAGVAR(hardcode_direct, $1)=yes
_LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
# but as the default
# location of the library.
case $cc_basename in
CC*)
# FIXME: insert proper C++ library support
_LT_TAGVAR(ld_shlibs, $1)=no
;;
aCC*)
_LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -b $wl+b $wl$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib'
# Commands to make compiler produce verbose output that lists
# what "hidden" libraries, object files and flags are used when
# linking a shared library.
#
# There doesn't appear to be a way to prevent this compiler from
# explicitly linking system object files so we need to strip them
# from the output so that they don't get included in the library
# dependencies.
output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
;;
*)
if test yes = "$GXX"; then
_LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag $wl+b $wl$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib'
else
# FIXME: insert proper C++ library support
_LT_TAGVAR(ld_shlibs, $1)=no
fi
;;
esac
;;
hpux10*|hpux11*)
if test no = "$with_gnu_ld"; then
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
case $host_cpu in
hppa*64*|ia64*)
;;
*)
_LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
;;
esac
fi
case $host_cpu in
hppa*64*|ia64*)
_LT_TAGVAR(hardcode_direct, $1)=no
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
;;
*)
_LT_TAGVAR(hardcode_direct, $1)=yes
_LT_TAGVAR(hardcode_direct_absolute, $1)=yes
_LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
# but as the default
# location of the library.
;;
esac
case $cc_basename in
CC*)
# FIXME: insert proper C++ library support
_LT_TAGVAR(ld_shlibs, $1)=no
;;
aCC*)
case $host_cpu in
hppa*64*)
_LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
;;
ia64*)
_LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
;;
*)
_LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
;;
esac
# Commands to make compiler produce verbose output that lists
# what "hidden" libraries, object files and flags are used when
# linking a shared library.
#
# There doesn't appear to be a way to prevent this compiler from
# explicitly linking system object files so we need to strip them
# from the output so that they don't get included in the library
# dependencies.
output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
;;
*)
if test yes = "$GXX"; then
if test no = "$with_gnu_ld"; then
case $host_cpu in
hppa*64*)
_LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC $wl+h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
;;
ia64*)
_LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag $wl+h $wl$soname $wl+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
;;
*)
_LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
;;
esac
fi
else
# FIXME: insert proper C++ library support
_LT_TAGVAR(ld_shlibs, $1)=no
fi
;;
esac
;;
interix[[3-9]]*)
_LT_TAGVAR(hardcode_direct, $1)=no
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
_LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
# Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
# Instead, shared libraries are loaded at an image base (0x10000000 by
# default) and relocated if they conflict, which is a slow very memory
# consuming and fragmenting process. To avoid this, we pick a random,
# 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
# time. Moving up from 0x10000000 also allows more sbrk(2) space.
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)='sed "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--retain-symbols-file,$output_objdir/$soname.expsym $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
;;
irix5* | irix6*)
case $cc_basename in
CC*)
# SGI C++
_LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
# Archives containing C++ object files must be created using
# "CC -ar", where "CC" is the IRIX C++ compiler. This is
# necessary to make sure instantiated templates are included
# in the archive.
_LT_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs'
;;
*)
if test yes = "$GXX"; then
if test no = "$with_gnu_ld"; then
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
else
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` -o $lib'
fi
fi
_LT_TAGVAR(link_all_deplibs, $1)=yes
;;
esac
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
_LT_TAGVAR(inherit_rpath, $1)=yes
;;
linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
case $cc_basename in
KCC*)
# Kuck and Associates, Inc. (KAI) C++ Compiler
# KCC will only create a shared library if the output file
# ends with ".so" (or ".sl" for HP-UX), so rename the library
# to its proper name (with version) after linking.
_LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\$tempext\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\$tempext\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib $wl-retain-symbols-file,$export_symbols; mv \$templib $lib'
# Commands to make compiler produce verbose output that lists
# what "hidden" libraries, object files and flags are used when
# linking a shared library.
#
# There doesn't appear to be a way to prevent this compiler from
# explicitly linking system object files so we need to strip them
# from the output so that they don't get included in the library
# dependencies.
output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
_LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic'
# Archives containing C++ object files must be created using
# "CC -Bstatic", where "CC" is the KAI C++ compiler.
_LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
;;
icpc* | ecpc* )
# Intel C++
with_gnu_ld=yes
# version 8.0 and above of icpc choke on multiply defined symbols
# if we add $predep_objects and $postdep_objects, however 7.1 and
# earlier do not add the objects themselves.
case `$CC -V 2>&1` in
*"Version 7."*)
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
;;
*) # Version 8.0 or newer
tmp_idyn=
case $host_cpu in
ia64*) tmp_idyn=' -i_dynamic';;
esac
_LT_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
;;
esac
_LT_TAGVAR(archive_cmds_need_lc, $1)=no
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
_LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic'
_LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive$convenience $wl--no-whole-archive'
;;
pgCC* | pgcpp*)
# Portland Group C++ compiler
case `$CC -V` in
*pgCC\ [[1-5]].* | *pgcpp\ [[1-5]].*)
_LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~
rm -rf $tpldir~
$CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~
compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"'
_LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~
rm -rf $tpldir~
$CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~
$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~
$RANLIB $oldlib'
_LT_TAGVAR(archive_cmds, $1)='tpldir=Template.dir~
rm -rf $tpldir~
$CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
$CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~
rm -rf $tpldir~
$CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
$CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
;;
*) # Version 6 and above use weak symbols
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
;;
esac
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl--rpath $wl$libdir'
_LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic'
_LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
;;
cxx*)
# Compaq C++
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib $wl-retain-symbols-file $wl$export_symbols'
runpath_var=LD_RUN_PATH
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
# Commands to make compiler produce verbose output that lists
# what "hidden" libraries, object files and flags are used when
# linking a shared library.
#
# There doesn't appear to be a way to prevent this compiler from
# explicitly linking system object files so we need to strip them
# from the output so that they don't get included in the library
# dependencies.
output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed'
;;
xl* | mpixl* | bgxl*)
# IBM XL 8.0 on PPC, with GNU ld
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
_LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic'
_LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
if test yes = "$supports_anon_versioning"; then
_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
echo "local: *; };" >> $output_objdir/$libname.ver~
$CC -qmkshrobj $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-version-script $wl$output_objdir/$libname.ver -o $lib'
fi
;;
*)
case `$CC -V 2>&1 | sed 5q` in
*Sun\ C*)
# Sun C++ 5.9
_LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
_LT_TAGVAR(archive_cmds, $1)='$CC -G$allow_undefined_flag -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G$allow_undefined_flag -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-retain-symbols-file $wl$export_symbols'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
_LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
_LT_TAGVAR(compiler_needs_object, $1)=yes
# Not sure whether something based on
# $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1
# would be better.
output_verbose_link_cmd='func_echo_all'
# Archives containing C++ object files must be created using
# "CC -xar", where "CC" is the Sun C++ compiler. This is
# necessary to make sure instantiated templates are included
# in the archive.
_LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
;;
esac
;;
esac
;;
lynxos*)
# FIXME: insert proper C++ library support
_LT_TAGVAR(ld_shlibs, $1)=no
;;
m88k*)
# FIXME: insert proper C++ library support
_LT_TAGVAR(ld_shlibs, $1)=no
;;
mvs*)
case $cc_basename in
cxx*)
# FIXME: insert proper C++ library support
_LT_TAGVAR(ld_shlibs, $1)=no
;;
*)
# FIXME: insert proper C++ library support
_LT_TAGVAR(ld_shlibs, $1)=no
;;
esac
;;
netbsd*)
if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
_LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
wlarc=
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
_LT_TAGVAR(hardcode_direct, $1)=yes
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
fi
# Workaround some broken pre-1.5 toolchains
output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
;;
*nto* | *qnx*)
_LT_TAGVAR(ld_shlibs, $1)=yes
;;
openbsd* | bitrig*)
if test -f /usr/libexec/ld.so; then
_LT_TAGVAR(hardcode_direct, $1)=yes
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
_LT_TAGVAR(hardcode_direct_absolute, $1)=yes
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`"; then
_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-retain-symbols-file,$export_symbols -o $lib'
_LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
_LT_TAGVAR(whole_archive_flag_spec, $1)=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive'
fi
output_verbose_link_cmd=func_echo_all
else
_LT_TAGVAR(ld_shlibs, $1)=no
fi
;;
osf3* | osf4* | osf5*)
case $cc_basename in
KCC*)
# Kuck and Associates, Inc. (KAI) C++ Compiler
# KCC will only create a shared library if the output file
# ends with ".so" (or ".sl" for HP-UX), so rename the library
# to its proper name (with version) after linking.
_LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\$tempext\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
# Archives containing C++ object files must be created using
# the KAI C++ compiler.
case $host in
osf3*) _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ;;
*) _LT_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' ;;
esac
;;
RCC*)
# Rational C++ 2.4.1
# FIXME: insert proper C++ library support
_LT_TAGVAR(ld_shlibs, $1)=no
;;
cxx*)
case $host in
osf3*)
_LT_TAGVAR(allow_undefined_flag, $1)=' $wl-expect_unresolved $wl\*'
_LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $soname `test -n "$verstring" && func_echo_all "$wl-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
;;
*)
_LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
_LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
echo "-hidden">> $lib.exp~
$CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname $wl-input $wl$lib.exp `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib~
$RM $lib.exp'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
;;
esac
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
# Commands to make compiler produce verbose output that lists
# what "hidden" libraries, object files and flags are used when
# linking a shared library.
#
# There doesn't appear to be a way to prevent this compiler from
# explicitly linking system object files so we need to strip them
# from the output so that they don't get included in the library
# dependencies.
output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
;;
*)
if test yes,no = "$GXX,$with_gnu_ld"; then
_LT_TAGVAR(allow_undefined_flag, $1)=' $wl-expect_unresolved $wl\*'
case $host in
osf3*)
_LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
;;
*)
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-msym $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
;;
esac
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
# Commands to make compiler produce verbose output that lists
# what "hidden" libraries, object files and flags are used when
# linking a shared library.
output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
else
# FIXME: insert proper C++ library support
_LT_TAGVAR(ld_shlibs, $1)=no
fi
;;
esac
;;
psos*)
# FIXME: insert proper C++ library support
_LT_TAGVAR(ld_shlibs, $1)=no
;;
sunos4*)
case $cc_basename in
CC*)
# Sun C++ 4.x
# FIXME: insert proper C++ library support
_LT_TAGVAR(ld_shlibs, $1)=no
;;
lcc*)
# Lucid
# FIXME: insert proper C++ library support
_LT_TAGVAR(ld_shlibs, $1)=no
;;
*)
# FIXME: insert proper C++ library support
_LT_TAGVAR(ld_shlibs, $1)=no
;;
esac
;;
solaris*)
case $cc_basename in
CC* | sunCC*)
# Sun C++ 4.2, 5.x and Centerline C++
_LT_TAGVAR(archive_cmds_need_lc,$1)=yes
_LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
_LT_TAGVAR(archive_cmds, $1)='$CC -G$allow_undefined_flag -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
$CC -G$allow_undefined_flag $wl-M $wl$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
case $host_os in
solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
*)
# The compiler driver will combine and reorder linker options,
# but understands '-z linker_flag'.
# Supported since Solaris 2.6 (maybe 2.5.1?)
_LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
;;
esac
_LT_TAGVAR(link_all_deplibs, $1)=yes
output_verbose_link_cmd='func_echo_all'
# Archives containing C++ object files must be created using
# "CC -xar", where "CC" is the Sun C++ compiler. This is
# necessary to make sure instantiated templates are included
# in the archive.
_LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
;;
gcx*)
# Green Hills C++ Compiler
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-h $wl$soname -o $lib'
# The C++ compiler must be used to create the archive.
_LT_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
;;
*)
# GNU C++ compiler with Solaris linker
if test yes,no = "$GXX,$with_gnu_ld"; then
_LT_TAGVAR(no_undefined_flag, $1)=' $wl-z ${wl}defs'
if $CC --version | $GREP -v '^2\.7' > /dev/null; then
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-h $wl$soname -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
$CC -shared $pic_flag -nostdlib $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
# Commands to make compiler produce verbose output that lists
# what "hidden" libraries, object files and flags are used when
# linking a shared library.
output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
else
# g++ 2.7 appears to require '-G' NOT '-shared' on this
# platform.
_LT_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-h $wl$soname -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
$CC -G -nostdlib $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
# Commands to make compiler produce verbose output that lists
# what "hidden" libraries, object files and flags are used when
# linking a shared library.
output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
fi
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R $wl$libdir'
case $host_os in
solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
*)
_LT_TAGVAR(whole_archive_flag_spec, $1)='$wl-z ${wl}allextract$convenience $wl-z ${wl}defaultextract'
;;
esac
fi
;;
esac
;;
sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
_LT_TAGVAR(no_undefined_flag, $1)='$wl-z,text'
_LT_TAGVAR(archive_cmds_need_lc, $1)=no
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
runpath_var='LD_RUN_PATH'
case $cc_basename in
CC*)
_LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
;;
*)
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
;;
esac
;;
sysv5* | sco3.2v5* | sco5v6*)
# Note: We CANNOT use -z defs as we might desire, because we do not
# link with -lc, and that would cause any symbols used from libc to
# always be unresolved, which means just about no library would
# ever link correctly. If we're not using GNU ld we use -z text
# though, which does catch some bad symbols but isn't as heavy-handed
# as -z defs.
_LT_TAGVAR(no_undefined_flag, $1)='$wl-z,text'
_LT_TAGVAR(allow_undefined_flag, $1)='$wl-z,nodefs'
_LT_TAGVAR(archive_cmds_need_lc, $1)=no
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R,$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=':'
_LT_TAGVAR(link_all_deplibs, $1)=yes
_LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-Bexport'
runpath_var='LD_RUN_PATH'
case $cc_basename in
CC*)
_LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
_LT_TAGVAR(old_archive_cmds, $1)='$CC -Tprelink_objects $oldobjs~
'"$_LT_TAGVAR(old_archive_cmds, $1)"
_LT_TAGVAR(reload_cmds, $1)='$CC -Tprelink_objects $reload_objs~
'"$_LT_TAGVAR(reload_cmds, $1)"
;;
*)
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
;;
esac
;;
tandem*)
case $cc_basename in
NCC*)
# NonStop-UX NCC 3.20
# FIXME: insert proper C++ library support
_LT_TAGVAR(ld_shlibs, $1)=no
;;
*)
# FIXME: insert proper C++ library support
_LT_TAGVAR(ld_shlibs, $1)=no
;;
esac
;;
vxworks*)
# FIXME: insert proper C++ library support
_LT_TAGVAR(ld_shlibs, $1)=no
;;
*)
# FIXME: insert proper C++ library support
_LT_TAGVAR(ld_shlibs, $1)=no
;;
esac
AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)])
test no = "$_LT_TAGVAR(ld_shlibs, $1)" && can_build_shared=no
_LT_TAGVAR(GCC, $1)=$GXX
_LT_TAGVAR(LD, $1)=$LD
## CAVEAT EMPTOR:
## There is no encapsulation within the following macros, do not change
## the running order or otherwise move them around unless you know exactly
## what you are doing...
_LT_SYS_HIDDEN_LIBDEPS($1)
_LT_COMPILER_PIC($1)
_LT_COMPILER_C_O($1)
_LT_COMPILER_FILE_LOCKS($1)
_LT_LINKER_SHLIBS($1)
_LT_SYS_DYNAMIC_LINKER($1)
_LT_LINKER_HARDCODE_LIBPATH($1)
_LT_CONFIG($1)
fi # test -n "$compiler"
CC=$lt_save_CC
CFLAGS=$lt_save_CFLAGS
LDCXX=$LD
LD=$lt_save_LD
GCC=$lt_save_GCC
with_gnu_ld=$lt_save_with_gnu_ld
lt_cv_path_LDCXX=$lt_cv_path_LD
lt_cv_path_LD=$lt_save_path_LD
lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
fi # test yes != "$_lt_caught_CXX_error"
AC_LANG_POP
])# _LT_LANG_CXX_CONFIG
# _LT_FUNC_STRIPNAME_CNF
# ----------------------
# func_stripname_cnf prefix suffix name
# strip PREFIX and SUFFIX off of NAME.
# PREFIX and SUFFIX must not contain globbing or regex special
# characters, hashes, percent signs, but SUFFIX may contain a leading
# dot (in which case that matches only a dot).
#
# This function is identical to the (non-XSI) version of func_stripname,
# except this one can be used by m4 code that may be executed by configure,
# rather than the libtool script.
m4_defun([_LT_FUNC_STRIPNAME_CNF],[dnl
AC_REQUIRE([_LT_DECL_SED])
AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])
func_stripname_cnf ()
{
case @S|@2 in
.*) func_stripname_result=`$ECHO "@S|@3" | $SED "s%^@S|@1%%; s%\\\\@S|@2\$%%"`;;
*) func_stripname_result=`$ECHO "@S|@3" | $SED "s%^@S|@1%%; s%@S|@2\$%%"`;;
esac
} # func_stripname_cnf
])# _LT_FUNC_STRIPNAME_CNF
# _LT_SYS_HIDDEN_LIBDEPS([TAGNAME])
# ---------------------------------
# Figure out "hidden" library dependencies from verbose
# compiler output when linking a shared library.
# Parse the compiler output and extract the necessary
# objects, libraries and library flags.
m4_defun([_LT_SYS_HIDDEN_LIBDEPS],
[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
AC_REQUIRE([_LT_FUNC_STRIPNAME_CNF])dnl
# Dependencies to place before and after the object being linked:
_LT_TAGVAR(predep_objects, $1)=
_LT_TAGVAR(postdep_objects, $1)=
_LT_TAGVAR(predeps, $1)=
_LT_TAGVAR(postdeps, $1)=
_LT_TAGVAR(compiler_lib_search_path, $1)=
dnl we can't use the lt_simple_compile_test_code here,
dnl because it contains code intended for an executable,
dnl not a library. It's possible we should let each
dnl tag define a new lt_????_link_test_code variable,
dnl but it's only used here...
m4_if([$1], [], [cat > conftest.$ac_ext <<_LT_EOF
int a;
void foo (void) { a = 0; }
_LT_EOF
], [$1], [CXX], [cat > conftest.$ac_ext <<_LT_EOF
class Foo
{
public:
Foo (void) { a = 0; }
private:
int a;
};
_LT_EOF
], [$1], [F77], [cat > conftest.$ac_ext <<_LT_EOF
subroutine foo
implicit none
integer*4 a
a=0
return
end
_LT_EOF
], [$1], [FC], [cat > conftest.$ac_ext <<_LT_EOF
subroutine foo
implicit none
integer a
a=0
return
end
_LT_EOF
], [$1], [GCJ], [cat > conftest.$ac_ext <<_LT_EOF
public class foo {
private int a;
public void bar (void) {
a = 0;
}
};
_LT_EOF
], [$1], [GO], [cat > conftest.$ac_ext <<_LT_EOF
package foo
func foo() {
}
_LT_EOF
])
_lt_libdeps_save_CFLAGS=$CFLAGS
case "$CC $CFLAGS " in #(
*\ -flto*\ *) CFLAGS="$CFLAGS -fno-lto" ;;
*\ -fwhopr*\ *) CFLAGS="$CFLAGS -fno-whopr" ;;
*\ -fuse-linker-plugin*\ *) CFLAGS="$CFLAGS -fno-use-linker-plugin" ;;
esac
dnl Parse the compiler output and extract the necessary
dnl objects, libraries and library flags.
if AC_TRY_EVAL(ac_compile); then
# Parse the compiler output and extract the necessary
# objects, libraries and library flags.
# Sentinel used to keep track of whether or not we are before
# the conftest object file.
pre_test_object_deps_done=no
for p in `eval "$output_verbose_link_cmd"`; do
case $prev$p in
-L* | -R* | -l*)
# Some compilers place space between "-{L,R}" and the path.
# Remove the space.
if test x-L = "$p" ||
test x-R = "$p"; then
prev=$p
continue
fi
# Expand the sysroot to ease extracting the directories later.
if test -z "$prev"; then
case $p in
-L*) func_stripname_cnf '-L' '' "$p"; prev=-L; p=$func_stripname_result ;;
-R*) func_stripname_cnf '-R' '' "$p"; prev=-R; p=$func_stripname_result ;;
-l*) func_stripname_cnf '-l' '' "$p"; prev=-l; p=$func_stripname_result ;;
esac
fi
case $p in
=*) func_stripname_cnf '=' '' "$p"; p=$lt_sysroot$func_stripname_result ;;
esac
if test no = "$pre_test_object_deps_done"; then
case $prev in
-L | -R)
# Internal compiler library paths should come after those
# provided the user. The postdeps already come after the
# user supplied libs so there is no need to process them.
if test -z "$_LT_TAGVAR(compiler_lib_search_path, $1)"; then
_LT_TAGVAR(compiler_lib_search_path, $1)=$prev$p
else
_LT_TAGVAR(compiler_lib_search_path, $1)="${_LT_TAGVAR(compiler_lib_search_path, $1)} $prev$p"
fi
;;
# The "-l" case would never come before the object being
# linked, so don't bother handling this case.
esac
else
if test -z "$_LT_TAGVAR(postdeps, $1)"; then
_LT_TAGVAR(postdeps, $1)=$prev$p
else
_LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} $prev$p"
fi
fi
prev=
;;
*.lto.$objext) ;; # Ignore GCC LTO objects
*.$objext)
# This assumes that the test object file only shows up
# once in the compiler output.
if test "$p" = "conftest.$objext"; then
pre_test_object_deps_done=yes
continue
fi
if test no = "$pre_test_object_deps_done"; then
if test -z "$_LT_TAGVAR(predep_objects, $1)"; then
_LT_TAGVAR(predep_objects, $1)=$p
else
_LT_TAGVAR(predep_objects, $1)="$_LT_TAGVAR(predep_objects, $1) $p"
fi
else
if test -z "$_LT_TAGVAR(postdep_objects, $1)"; then
_LT_TAGVAR(postdep_objects, $1)=$p
else
_LT_TAGVAR(postdep_objects, $1)="$_LT_TAGVAR(postdep_objects, $1) $p"
fi
fi
;;
*) ;; # Ignore the rest.
esac
done
# Clean up.
rm -f a.out a.exe
else
echo "libtool.m4: error: problem compiling $1 test program"
fi
$RM -f confest.$objext
CFLAGS=$_lt_libdeps_save_CFLAGS
# PORTME: override above test on systems where it is broken
m4_if([$1], [CXX],
[case $host_os in
interix[[3-9]]*)
# Interix 3.5 installs completely hosed .la files for C++, so rather than
# hack all around it, let's just trust "g++" to DTRT.
_LT_TAGVAR(predep_objects,$1)=
_LT_TAGVAR(postdep_objects,$1)=
_LT_TAGVAR(postdeps,$1)=
;;
esac
])
case " $_LT_TAGVAR(postdeps, $1) " in
*" -lc "*) _LT_TAGVAR(archive_cmds_need_lc, $1)=no ;;
esac
_LT_TAGVAR(compiler_lib_search_dirs, $1)=
if test -n "${_LT_TAGVAR(compiler_lib_search_path, $1)}"; then
_LT_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_TAGVAR(compiler_lib_search_path, $1)}" | $SED -e 's! -L! !g' -e 's!^ !!'`
fi
_LT_TAGDECL([], [compiler_lib_search_dirs], [1],
[The directories searched by this compiler when creating a shared library])
_LT_TAGDECL([], [predep_objects], [1],
[Dependencies to place before and after the objects being linked to
create a shared library])
_LT_TAGDECL([], [postdep_objects], [1])
_LT_TAGDECL([], [predeps], [1])
_LT_TAGDECL([], [postdeps], [1])
_LT_TAGDECL([], [compiler_lib_search_path], [1],
[The library search path used internally by the compiler when linking
a shared library])
])# _LT_SYS_HIDDEN_LIBDEPS
# _LT_LANG_F77_CONFIG([TAG])
# --------------------------
# Ensure that the configuration variables for a Fortran 77 compiler are
# suitably defined. These variables are subsequently used by _LT_CONFIG
# to write the compiler configuration to 'libtool'.
m4_defun([_LT_LANG_F77_CONFIG],
[AC_LANG_PUSH(Fortran 77)
if test -z "$F77" || test no = "$F77"; then
_lt_disable_F77=yes
fi
_LT_TAGVAR(archive_cmds_need_lc, $1)=no
_LT_TAGVAR(allow_undefined_flag, $1)=
_LT_TAGVAR(always_export_symbols, $1)=no
_LT_TAGVAR(archive_expsym_cmds, $1)=
_LT_TAGVAR(export_dynamic_flag_spec, $1)=
_LT_TAGVAR(hardcode_direct, $1)=no
_LT_TAGVAR(hardcode_direct_absolute, $1)=no
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
_LT_TAGVAR(hardcode_libdir_separator, $1)=
_LT_TAGVAR(hardcode_minus_L, $1)=no
_LT_TAGVAR(hardcode_automatic, $1)=no
_LT_TAGVAR(inherit_rpath, $1)=no
_LT_TAGVAR(module_cmds, $1)=
_LT_TAGVAR(module_expsym_cmds, $1)=
_LT_TAGVAR(link_all_deplibs, $1)=unknown
_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
_LT_TAGVAR(reload_flag, $1)=$reload_flag
_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
_LT_TAGVAR(no_undefined_flag, $1)=
_LT_TAGVAR(whole_archive_flag_spec, $1)=
_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
# Source file extension for f77 test sources.
ac_ext=f
# Object file extension for compiled f77 test sources.
objext=o
_LT_TAGVAR(objext, $1)=$objext
# No sense in running all these tests if we already determined that
# the F77 compiler isn't working. Some variables (like enable_shared)
# are currently assumed to apply to all compilers on this platform,
# and will be corrupted by setting them based on a non-working compiler.
if test yes != "$_lt_disable_F77"; then
# Code to be used in simple compile tests
lt_simple_compile_test_code="\
subroutine t
return
end
"
# Code to be used in simple link tests
lt_simple_link_test_code="\
program t
end
"
# ltmain only uses $CC for tagged configurations so make sure $CC is set.
_LT_TAG_COMPILER
# save warnings/boilerplate of simple test code
_LT_COMPILER_BOILERPLATE
_LT_LINKER_BOILERPLATE
# Allow CC to be a program name with arguments.
lt_save_CC=$CC
lt_save_GCC=$GCC
lt_save_CFLAGS=$CFLAGS
CC=${F77-"f77"}
CFLAGS=$FFLAGS
compiler=$CC
_LT_TAGVAR(compiler, $1)=$CC
_LT_CC_BASENAME([$compiler])
GCC=$G77
if test -n "$compiler"; then
AC_MSG_CHECKING([if libtool supports shared libraries])
AC_MSG_RESULT([$can_build_shared])
AC_MSG_CHECKING([whether to build shared libraries])
test no = "$can_build_shared" && enable_shared=no
# On AIX, shared libraries and static libraries use the same namespace, and
# are all built from PIC.
case $host_os in
aix3*)
test yes = "$enable_shared" && enable_static=no
if test -n "$RANLIB"; then
archive_cmds="$archive_cmds~\$RANLIB \$lib"
postinstall_cmds='$RANLIB $lib'
fi
;;
aix[[4-9]]*)
if test ia64 != "$host_cpu"; then
case $enable_shared,$with_aix_soname,$aix_use_runtimelinking in
yes,aix,yes) ;; # shared object as lib.so file only
yes,svr4,*) ;; # shared object as lib.so archive member only
yes,*) enable_static=no ;; # shared object in lib.a archive as well
esac
fi
;;
esac
AC_MSG_RESULT([$enable_shared])
AC_MSG_CHECKING([whether to build static libraries])
# Make sure either enable_shared or enable_static is yes.
test yes = "$enable_shared" || enable_static=yes
AC_MSG_RESULT([$enable_static])
_LT_TAGVAR(GCC, $1)=$G77
_LT_TAGVAR(LD, $1)=$LD
## CAVEAT EMPTOR:
## There is no encapsulation within the following macros, do not change
## the running order or otherwise move them around unless you know exactly
## what you are doing...
_LT_COMPILER_PIC($1)
_LT_COMPILER_C_O($1)
_LT_COMPILER_FILE_LOCKS($1)
_LT_LINKER_SHLIBS($1)
_LT_SYS_DYNAMIC_LINKER($1)
_LT_LINKER_HARDCODE_LIBPATH($1)
_LT_CONFIG($1)
fi # test -n "$compiler"
GCC=$lt_save_GCC
CC=$lt_save_CC
CFLAGS=$lt_save_CFLAGS
fi # test yes != "$_lt_disable_F77"
AC_LANG_POP
])# _LT_LANG_F77_CONFIG
# _LT_LANG_FC_CONFIG([TAG])
# -------------------------
# Ensure that the configuration variables for a Fortran compiler are
# suitably defined. These variables are subsequently used by _LT_CONFIG
# to write the compiler configuration to 'libtool'.
m4_defun([_LT_LANG_FC_CONFIG],
[AC_LANG_PUSH(Fortran)
if test -z "$FC" || test no = "$FC"; then
_lt_disable_FC=yes
fi
_LT_TAGVAR(archive_cmds_need_lc, $1)=no
_LT_TAGVAR(allow_undefined_flag, $1)=
_LT_TAGVAR(always_export_symbols, $1)=no
_LT_TAGVAR(archive_expsym_cmds, $1)=
_LT_TAGVAR(export_dynamic_flag_spec, $1)=
_LT_TAGVAR(hardcode_direct, $1)=no
_LT_TAGVAR(hardcode_direct_absolute, $1)=no
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
_LT_TAGVAR(hardcode_libdir_separator, $1)=
_LT_TAGVAR(hardcode_minus_L, $1)=no
_LT_TAGVAR(hardcode_automatic, $1)=no
_LT_TAGVAR(inherit_rpath, $1)=no
_LT_TAGVAR(module_cmds, $1)=
_LT_TAGVAR(module_expsym_cmds, $1)=
_LT_TAGVAR(link_all_deplibs, $1)=unknown
_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
_LT_TAGVAR(reload_flag, $1)=$reload_flag
_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
_LT_TAGVAR(no_undefined_flag, $1)=
_LT_TAGVAR(whole_archive_flag_spec, $1)=
_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
# Source file extension for fc test sources.
ac_ext=${ac_fc_srcext-f}
# Object file extension for compiled fc test sources.
objext=o
_LT_TAGVAR(objext, $1)=$objext
# No sense in running all these tests if we already determined that
# the FC compiler isn't working. Some variables (like enable_shared)
# are currently assumed to apply to all compilers on this platform,
# and will be corrupted by setting them based on a non-working compiler.
if test yes != "$_lt_disable_FC"; then
# Code to be used in simple compile tests
lt_simple_compile_test_code="\
subroutine t
return
end
"
# Code to be used in simple link tests
lt_simple_link_test_code="\
program t
end
"
# ltmain only uses $CC for tagged configurations so make sure $CC is set.
_LT_TAG_COMPILER
# save warnings/boilerplate of simple test code
_LT_COMPILER_BOILERPLATE
_LT_LINKER_BOILERPLATE
# Allow CC to be a program name with arguments.
lt_save_CC=$CC
lt_save_GCC=$GCC
lt_save_CFLAGS=$CFLAGS
CC=${FC-"f95"}
CFLAGS=$FCFLAGS
compiler=$CC
GCC=$ac_cv_fc_compiler_gnu
_LT_TAGVAR(compiler, $1)=$CC
_LT_CC_BASENAME([$compiler])
if test -n "$compiler"; then
AC_MSG_CHECKING([if libtool supports shared libraries])
AC_MSG_RESULT([$can_build_shared])
AC_MSG_CHECKING([whether to build shared libraries])
test no = "$can_build_shared" && enable_shared=no
# On AIX, shared libraries and static libraries use the same namespace, and
# are all built from PIC.
case $host_os in
aix3*)
test yes = "$enable_shared" && enable_static=no
if test -n "$RANLIB"; then
archive_cmds="$archive_cmds~\$RANLIB \$lib"
postinstall_cmds='$RANLIB $lib'
fi
;;
aix[[4-9]]*)
if test ia64 != "$host_cpu"; then
case $enable_shared,$with_aix_soname,$aix_use_runtimelinking in
yes,aix,yes) ;; # shared object as lib.so file only
yes,svr4,*) ;; # shared object as lib.so archive member only
yes,*) enable_static=no ;; # shared object in lib.a archive as well
esac
fi
;;
esac
AC_MSG_RESULT([$enable_shared])
AC_MSG_CHECKING([whether to build static libraries])
# Make sure either enable_shared or enable_static is yes.
test yes = "$enable_shared" || enable_static=yes
AC_MSG_RESULT([$enable_static])
_LT_TAGVAR(GCC, $1)=$ac_cv_fc_compiler_gnu
_LT_TAGVAR(LD, $1)=$LD
## CAVEAT EMPTOR:
## There is no encapsulation within the following macros, do not change
## the running order or otherwise move them around unless you know exactly
## what you are doing...
_LT_SYS_HIDDEN_LIBDEPS($1)
_LT_COMPILER_PIC($1)
_LT_COMPILER_C_O($1)
_LT_COMPILER_FILE_LOCKS($1)
_LT_LINKER_SHLIBS($1)
_LT_SYS_DYNAMIC_LINKER($1)
_LT_LINKER_HARDCODE_LIBPATH($1)
_LT_CONFIG($1)
fi # test -n "$compiler"
GCC=$lt_save_GCC
CC=$lt_save_CC
CFLAGS=$lt_save_CFLAGS
fi # test yes != "$_lt_disable_FC"
AC_LANG_POP
])# _LT_LANG_FC_CONFIG
# _LT_LANG_GCJ_CONFIG([TAG])
# --------------------------
# Ensure that the configuration variables for the GNU Java Compiler compiler
# are suitably defined. These variables are subsequently used by _LT_CONFIG
# to write the compiler configuration to 'libtool'.
m4_defun([_LT_LANG_GCJ_CONFIG],
[AC_REQUIRE([LT_PROG_GCJ])dnl
AC_LANG_SAVE
# Source file extension for Java test sources.
ac_ext=java
# Object file extension for compiled Java test sources.
objext=o
_LT_TAGVAR(objext, $1)=$objext
# Code to be used in simple compile tests
lt_simple_compile_test_code="class foo {}"
# Code to be used in simple link tests
lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }'
# ltmain only uses $CC for tagged configurations so make sure $CC is set.
_LT_TAG_COMPILER
# save warnings/boilerplate of simple test code
_LT_COMPILER_BOILERPLATE
_LT_LINKER_BOILERPLATE
# Allow CC to be a program name with arguments.
lt_save_CC=$CC
lt_save_CFLAGS=$CFLAGS
lt_save_GCC=$GCC
GCC=yes
CC=${GCJ-"gcj"}
CFLAGS=$GCJFLAGS
compiler=$CC
_LT_TAGVAR(compiler, $1)=$CC
_LT_TAGVAR(LD, $1)=$LD
_LT_CC_BASENAME([$compiler])
# GCJ did not exist at the time GCC didn't implicitly link libc in.
_LT_TAGVAR(archive_cmds_need_lc, $1)=no
_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
_LT_TAGVAR(reload_flag, $1)=$reload_flag
_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
## CAVEAT EMPTOR:
## There is no encapsulation within the following macros, do not change
## the running order or otherwise move them around unless you know exactly
## what you are doing...
if test -n "$compiler"; then
_LT_COMPILER_NO_RTTI($1)
_LT_COMPILER_PIC($1)
_LT_COMPILER_C_O($1)
_LT_COMPILER_FILE_LOCKS($1)
_LT_LINKER_SHLIBS($1)
_LT_LINKER_HARDCODE_LIBPATH($1)
_LT_CONFIG($1)
fi
AC_LANG_RESTORE
GCC=$lt_save_GCC
CC=$lt_save_CC
CFLAGS=$lt_save_CFLAGS
])# _LT_LANG_GCJ_CONFIG
# _LT_LANG_GO_CONFIG([TAG])
# --------------------------
# Ensure that the configuration variables for the GNU Go compiler
# are suitably defined. These variables are subsequently used by _LT_CONFIG
# to write the compiler configuration to 'libtool'.
m4_defun([_LT_LANG_GO_CONFIG],
[AC_REQUIRE([LT_PROG_GO])dnl
AC_LANG_SAVE
# Source file extension for Go test sources.
ac_ext=go
# Object file extension for compiled Go test sources.
objext=o
_LT_TAGVAR(objext, $1)=$objext
# Code to be used in simple compile tests
lt_simple_compile_test_code="package main; func main() { }"
# Code to be used in simple link tests
lt_simple_link_test_code='package main; func main() { }'
# ltmain only uses $CC for tagged configurations so make sure $CC is set.
_LT_TAG_COMPILER
# save warnings/boilerplate of simple test code
_LT_COMPILER_BOILERPLATE
_LT_LINKER_BOILERPLATE
# Allow CC to be a program name with arguments.
lt_save_CC=$CC
lt_save_CFLAGS=$CFLAGS
lt_save_GCC=$GCC
GCC=yes
CC=${GOC-"gccgo"}
CFLAGS=$GOFLAGS
compiler=$CC
_LT_TAGVAR(compiler, $1)=$CC
_LT_TAGVAR(LD, $1)=$LD
_LT_CC_BASENAME([$compiler])
# Go did not exist at the time GCC didn't implicitly link libc in.
_LT_TAGVAR(archive_cmds_need_lc, $1)=no
_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
_LT_TAGVAR(reload_flag, $1)=$reload_flag
_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
## CAVEAT EMPTOR:
## There is no encapsulation within the following macros, do not change
## the running order or otherwise move them around unless you know exactly
## what you are doing...
if test -n "$compiler"; then
_LT_COMPILER_NO_RTTI($1)
_LT_COMPILER_PIC($1)
_LT_COMPILER_C_O($1)
_LT_COMPILER_FILE_LOCKS($1)
_LT_LINKER_SHLIBS($1)
_LT_LINKER_HARDCODE_LIBPATH($1)
_LT_CONFIG($1)
fi
AC_LANG_RESTORE
GCC=$lt_save_GCC
CC=$lt_save_CC
CFLAGS=$lt_save_CFLAGS
])# _LT_LANG_GO_CONFIG
# _LT_LANG_RC_CONFIG([TAG])
# -------------------------
# Ensure that the configuration variables for the Windows resource compiler
# are suitably defined. These variables are subsequently used by _LT_CONFIG
# to write the compiler configuration to 'libtool'.
m4_defun([_LT_LANG_RC_CONFIG],
[AC_REQUIRE([LT_PROG_RC])dnl
AC_LANG_SAVE
# Source file extension for RC test sources.
ac_ext=rc
# Object file extension for compiled RC test sources.
objext=o
_LT_TAGVAR(objext, $1)=$objext
# Code to be used in simple compile tests
lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }'
# Code to be used in simple link tests
lt_simple_link_test_code=$lt_simple_compile_test_code
# ltmain only uses $CC for tagged configurations so make sure $CC is set.
_LT_TAG_COMPILER
# save warnings/boilerplate of simple test code
_LT_COMPILER_BOILERPLATE
_LT_LINKER_BOILERPLATE
# Allow CC to be a program name with arguments.
lt_save_CC=$CC
lt_save_CFLAGS=$CFLAGS
lt_save_GCC=$GCC
GCC=
CC=${RC-"windres"}
CFLAGS=
compiler=$CC
_LT_TAGVAR(compiler, $1)=$CC
_LT_CC_BASENAME([$compiler])
_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
if test -n "$compiler"; then
:
_LT_CONFIG($1)
fi
GCC=$lt_save_GCC
AC_LANG_RESTORE
CC=$lt_save_CC
CFLAGS=$lt_save_CFLAGS
])# _LT_LANG_RC_CONFIG
# LT_PROG_GCJ
# -----------
AC_DEFUN([LT_PROG_GCJ],
[m4_ifdef([AC_PROG_GCJ], [AC_PROG_GCJ],
[m4_ifdef([A][M_PROG_GCJ], [A][M_PROG_GCJ],
[AC_CHECK_TOOL(GCJ, gcj,)
test set = "${GCJFLAGS+set}" || GCJFLAGS="-g -O2"
AC_SUBST(GCJFLAGS)])])[]dnl
])
# Old name:
AU_ALIAS([LT_AC_PROG_GCJ], [LT_PROG_GCJ])
dnl aclocal-1.4 backwards compatibility:
dnl AC_DEFUN([LT_AC_PROG_GCJ], [])
# LT_PROG_GO
# ----------
AC_DEFUN([LT_PROG_GO],
[AC_CHECK_TOOL(GOC, gccgo,)
])
# LT_PROG_RC
# ----------
AC_DEFUN([LT_PROG_RC],
[AC_CHECK_TOOL(RC, windres,)
])
# Old name:
AU_ALIAS([LT_AC_PROG_RC], [LT_PROG_RC])
dnl aclocal-1.4 backwards compatibility:
dnl AC_DEFUN([LT_AC_PROG_RC], [])
# _LT_DECL_EGREP
# --------------
# If we don't have a new enough Autoconf to choose the best grep
# available, choose the one first in the user's PATH.
m4_defun([_LT_DECL_EGREP],
[AC_REQUIRE([AC_PROG_EGREP])dnl
AC_REQUIRE([AC_PROG_FGREP])dnl
test -z "$GREP" && GREP=grep
_LT_DECL([], [GREP], [1], [A grep program that handles long lines])
_LT_DECL([], [EGREP], [1], [An ERE matcher])
_LT_DECL([], [FGREP], [1], [A literal string matcher])
dnl Non-bleeding-edge autoconf doesn't subst GREP, so do it here too
AC_SUBST([GREP])
])
# _LT_DECL_OBJDUMP
# --------------
# If we don't have a new enough Autoconf to choose the best objdump
# available, choose the one first in the user's PATH.
m4_defun([_LT_DECL_OBJDUMP],
[AC_CHECK_TOOL(OBJDUMP, objdump, false)
test -z "$OBJDUMP" && OBJDUMP=objdump
_LT_DECL([], [OBJDUMP], [1], [An object symbol dumper])
AC_SUBST([OBJDUMP])
])
# _LT_DECL_DLLTOOL
# ----------------
# Ensure DLLTOOL variable is set.
m4_defun([_LT_DECL_DLLTOOL],
[AC_CHECK_TOOL(DLLTOOL, dlltool, false)
test -z "$DLLTOOL" && DLLTOOL=dlltool
_LT_DECL([], [DLLTOOL], [1], [DLL creation program])
AC_SUBST([DLLTOOL])
])
# _LT_DECL_SED
# ------------
# Check for a fully-functional sed program, that truncates
# as few characters as possible. Prefer GNU sed if found.
m4_defun([_LT_DECL_SED],
[AC_PROG_SED
test -z "$SED" && SED=sed
Xsed="$SED -e 1s/^X//"
_LT_DECL([], [SED], [1], [A sed program that does not truncate output])
_LT_DECL([], [Xsed], ["\$SED -e 1s/^X//"],
[Sed that helps us avoid accidentally triggering echo(1) options like -n])
])# _LT_DECL_SED
m4_ifndef([AC_PROG_SED], [
############################################################
# NOTE: This macro has been submitted for inclusion into #
# GNU Autoconf as AC_PROG_SED. When it is available in #
# a released version of Autoconf we should remove this #
# macro and use it instead. #
############################################################
m4_defun([AC_PROG_SED],
[AC_MSG_CHECKING([for a sed that does not truncate output])
AC_CACHE_VAL(lt_cv_path_SED,
[# Loop through the user's path and test for sed and gsed.
# Then use that list of sed's as ones to test for truncation.
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for lt_ac_prog in sed gsed; do
for ac_exec_ext in '' $ac_executable_extensions; do
if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then
lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext"
fi
done
done
done
IFS=$as_save_IFS
lt_ac_max=0
lt_ac_count=0
# Add /usr/xpg4/bin/sed as it is typically found on Solaris
# along with /bin/sed that truncates output.
for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
test ! -f "$lt_ac_sed" && continue
cat /dev/null > conftest.in
lt_ac_count=0
echo $ECHO_N "0123456789$ECHO_C" >conftest.in
# Check for GNU sed and select it if it is found.
if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then
lt_cv_path_SED=$lt_ac_sed
break
fi
while true; do
cat conftest.in conftest.in >conftest.tmp
mv conftest.tmp conftest.in
cp conftest.in conftest.nl
echo >>conftest.nl
$lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break
cmp -s conftest.out conftest.nl || break
# 10000 chars as input seems more than enough
test 10 -lt "$lt_ac_count" && break
lt_ac_count=`expr $lt_ac_count + 1`
if test "$lt_ac_count" -gt "$lt_ac_max"; then
lt_ac_max=$lt_ac_count
lt_cv_path_SED=$lt_ac_sed
fi
done
done
])
SED=$lt_cv_path_SED
AC_SUBST([SED])
AC_MSG_RESULT([$SED])
])#AC_PROG_SED
])#m4_ifndef
# Old name:
AU_ALIAS([LT_AC_PROG_SED], [AC_PROG_SED])
dnl aclocal-1.4 backwards compatibility:
dnl AC_DEFUN([LT_AC_PROG_SED], [])
# _LT_CHECK_SHELL_FEATURES
# ------------------------
# Find out whether the shell is Bourne or XSI compatible,
# or has some other useful features.
m4_defun([_LT_CHECK_SHELL_FEATURES],
[if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
lt_unset=unset
else
lt_unset=false
fi
_LT_DECL([], [lt_unset], [0], [whether the shell understands "unset"])dnl
# test EBCDIC or ASCII
case `echo X|tr X '\101'` in
A) # ASCII based system
# \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
lt_SP2NL='tr \040 \012'
lt_NL2SP='tr \015\012 \040\040'
;;
*) # EBCDIC based system
lt_SP2NL='tr \100 \n'
lt_NL2SP='tr \r\n \100\100'
;;
esac
_LT_DECL([SP2NL], [lt_SP2NL], [1], [turn spaces into newlines])dnl
_LT_DECL([NL2SP], [lt_NL2SP], [1], [turn newlines into spaces])dnl
])# _LT_CHECK_SHELL_FEATURES
# _LT_PATH_CONVERSION_FUNCTIONS
# -----------------------------
# Determine what file name conversion functions should be used by
# func_to_host_file (and, implicitly, by func_to_host_path). These are needed
# for certain cross-compile configurations and native mingw.
m4_defun([_LT_PATH_CONVERSION_FUNCTIONS],
[AC_REQUIRE([AC_CANONICAL_HOST])dnl
AC_REQUIRE([AC_CANONICAL_BUILD])dnl
AC_MSG_CHECKING([how to convert $build file names to $host format])
AC_CACHE_VAL(lt_cv_to_host_file_cmd,
[case $host in
*-*-mingw* )
case $build in
*-*-mingw* ) # actually msys
lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32
;;
*-*-cygwin* )
lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32
;;
* ) # otherwise, assume *nix
lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32
;;
esac
;;
*-*-cygwin* )
case $build in
*-*-mingw* ) # actually msys
lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin
;;
*-*-cygwin* )
lt_cv_to_host_file_cmd=func_convert_file_noop
;;
* ) # otherwise, assume *nix
lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin
;;
esac
;;
* ) # unhandled hosts (and "normal" native builds)
lt_cv_to_host_file_cmd=func_convert_file_noop
;;
esac
])
to_host_file_cmd=$lt_cv_to_host_file_cmd
AC_MSG_RESULT([$lt_cv_to_host_file_cmd])
_LT_DECL([to_host_file_cmd], [lt_cv_to_host_file_cmd],
[0], [convert $build file names to $host format])dnl
AC_MSG_CHECKING([how to convert $build file names to toolchain format])
AC_CACHE_VAL(lt_cv_to_tool_file_cmd,
[#assume ordinary cross tools, or native build.
lt_cv_to_tool_file_cmd=func_convert_file_noop
case $host in
*-*-mingw* )
case $build in
*-*-mingw* ) # actually msys
lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32
;;
esac
;;
esac
])
to_tool_file_cmd=$lt_cv_to_tool_file_cmd
AC_MSG_RESULT([$lt_cv_to_tool_file_cmd])
_LT_DECL([to_tool_file_cmd], [lt_cv_to_tool_file_cmd],
[0], [convert $build files to toolchain format])dnl
])# _LT_PATH_CONVERSION_FUNCTIONS

File Metadata

Mime Type
text/plain
Expires
Sat, Dec 21, 2:03 PM (16 h, 4 m)
Storage Engine
blob
Storage Format
Raw Data
Storage Handle
4020897
Default Alt Text
libtool.m4 (298 KB)

Event Timeline