Page MenuHomeHEPForge
Files F7879005

No OneTemporary
Actions

View Options

diff --git a/src/FxFx-Tree.in b/src/FxFx-Tree.in
--- a/src/FxFx-Tree.in
+++ b/src/FxFx-Tree.in
@@ -1,185 +1,173 @@
#############################################################
# Create an event generator taking the default EventGenerator #
# as the starting point ... #
#############################################################
cd /Herwig/Generators
# Copy the default EventGenerator with its settings to a new
# which will be the basis of the one we use for showering:
cp EventGenerator theGenerator
#############################################################
# Create a LH event handler (set up & assigned below) ... #
#############################################################
cd /Herwig/EventHandlers
library HwFxFx.so
create Herwig::FxFxEventHandler theLesHouchesHandler
#############################################################
# Create a LH reader (set up & assigned below) ... #
#############################################################
cd /Herwig/EventHandlers
library HwFxFx.so
create Herwig::FxFxFileReader theLHReader
#############################################################
# Create an FxFxHandler (set up & assigned below) ... #
#############################################################
cd /Herwig/Shower
library HwFxFxHandler.so
create Herwig::FxFxHandler FxFxHandler
-set /Herwig/Shower/FxFxHandler:ShowerModel /Herwig/Shower/ShowerModel
set /Herwig/Shower/FxFxHandler:SplittingGenerator /Herwig/Shower/SplittingGenerator
+set /Herwig/Shower/FxFxHandler:KinematicsReconstructor /Herwig/Shower/KinematicsReconstructor
+set /Herwig/Shower/FxFxHandler:PartnerFinder /Herwig/Shower/PartnerFinder
#############################################################
# Create an LHAPDF (set up & assigned below) ... #
#############################################################
cd /Herwig/Partons
create ThePEG::LHAPDF thePDFset ThePEGLHAPDF.so
############################################################
# Create a cuts object ... #
############################################################
cd /Herwig/EventHandlers
create ThePEG::Cuts /Herwig/Cuts/NoCuts
#############################################################
# Setup the LH event handler ... #
#############################################################
cd /Herwig/EventHandlers
insert theLesHouchesHandler:FxFxReaders[0] theLHReader
set theLesHouchesHandler:WeightOption VarNegWeight
set theLesHouchesHandler:PartonExtractor /Herwig/Partons/PPExtractor
set theLesHouchesHandler:CascadeHandler /Herwig/Shower/FxFxHandler
set theLesHouchesHandler:HadronizationHandler /Herwig/Hadronization/ClusterHadHandler
set theLesHouchesHandler:DecayHandler /Herwig/Decays/DecayHandler
############################################################
##################################################
# Shower parameters
##################################################
# normally, you want
# the scale supplied in the event files (SCALUP)
# to be used as a pT veto scale in the parton shower
set /Herwig/Shower/ShowerHandler:MaxPtIsMuF Yes
set /Herwig/Shower/ShowerHandler:RestrictPhasespace Yes
############################################################
#############################################################
# Set up the LH reader ... #
#############################################################
cd /Herwig/EventHandlers
set theLHReader:WeightWarnings false
# Input event file name:
# 10 k
set theLHReader:FileName NAME_OF_FILE #(the file can be compressed (gziped,bziped))
set theLHReader:MomentumTreatment RescaleEnergy
set theLHReader:Cuts /Herwig/Cuts/NoCuts
####################################################
# Set up the generator ... #
####################################################
cd /Herwig/Generators
set theGenerator:EventHandler /Herwig/EventHandlers/theLesHouchesHandler
set theGenerator:NumberOfEvents 100000000
set theGenerator:RandomNumberGenerator:Seed 31122001
set theGenerator:PrintEvent 1
set theGenerator:MaxErrors 10000
#########################################################
# Option to off shower / hadronization / decays / MPI. #
#########################################################
cd /Herwig/EventHandlers
# set theLesHouchesHandler:CascadeHandler NULL
#set theLesHouchesHandler:HadronizationHandler NULL
# remove the quark check in case hadronization is turned off
# set /Herwig/Analysis/Basics:CheckQuark false
#set theLesHouchesHandler:DecayHandler NULL
# The handler for multiple parton interactions
#set /Herwig/Shower/FxFxHandler:MPIHandler NULL
#############################################################
# Set up the FxFxHandler ... #
#############################################################
cd /Herwig/Shower
set /Herwig/Shower/FxFxHandler:MPIHandler /Herwig/UnderlyingEvent/MPIHandler
set /Herwig/Shower/FxFxHandler:RemDecayer /Herwig/Partons/RemnantDecayer
set /Herwig/Shower/FxFxHandler:ShowerAlpha AlphaQCD
# set the heavy quark decay product vetoing process on/off
set FxFxHandler:HeavyQVeto Yes
# Automatic detection of the hard process (experimental)
set FxFxHandler:HardProcessDetection Automatic
set FxFxHandler:ihrd 3
# No. of light jets in maximum-multiplicity FxFx process
set FxFxHandler:njetsmax 1 # Make sure this is set correctly!
# Mimimum parton-parton R-sep used for generation.
set FxFxHandler:drjmin 0
#########################################################
# Recommended key merging parameters below #
#########################################################
cd /Herwig/Shower
# turn the Vetoing On or Off completely
set FxFxHandler:VetoIsTurnedOff VetoingIsOn
# merging mode: in this case Tree level with MG5 information:
set FxFxHandler:MergeMode TreeMG5
# merging scale
set FxFxHandler:ETClus 25*GeV
# jet radius used in clustering in merging.
set FxFxHandler:RClus 1.0
# Max |eta| for jets in clustering in merging.
set FxFxHandler:EtaClusMax 10
# Default 1.5 factor used to decide if a jet matches a parton
# in merging: if DR(parton,jet)<rclusfactor*rclus the parton
# and jet are said to have been matched.
set FxFxHandler:RClusFactor 1.5
#########################################################
# Rivet settings and other analyses #
#########################################################
cd /Herwig/Generators
# Stuff for rivet:
#create ThePEG::RivetAnalysis /Herwig/Analysis/RivetAnalysis RivetAnalysis.so
#insert theGenerator:AnalysisHandlers 0 /Herwig/Analysis/RivetAnalysis
#insert /Herwig/Analysis/RivetAnalysis:Analyses 0 MC_XS
#insert /Herwig/Analysis/RivetAnalysis:Analyses 1 ATLAS_2011_I928289_Z
-#insert /Herwig/Analysis/RivetAnalysis:Analyses 2 ATLAS_2011_I945498
-#insert /Herwig/Analysis/RivetAnalysis:Analyses 3 ATLAS_2011_S9131140
-#insert /Herwig/Analysis/RivetAnalysis:Analyses 4 ATLAS_2013_I1230812
-#insert /Herwig/Analysis/RivetAnalysis:Analyses 5 ATLAS_2014_I1315949
-#insert /Herwig/Analysis/RivetAnalysis:Analyses 1 MC_TTBAR
-#insert /Herwig/Analysis/RivetAnalysis:Analyses 2 ATLAS_2014_I1304289
-#insert /Herwig/Analysis/RivetAnalysis:Analyses 2 ATLAS_2013_I1243871
-#insert /Herwig/Analysis/RivetAnalysis:Analyses 3 ATLAS_2014_I1304688
-#insert /Herwig/Analysis/RivetAnalysis:Analyses 4 ATLAS_2015_I1345452
cd /Herwig/Generators
# Stuff for rivet:
#create ThePEG::FxFxAnalysis /Herwig/Analysis/FxFxAnalysis FxFxAnalysis.so
# use the optional weights (WARNING: runs rivet multiple times!)
#set /Herwig/Analysis/FxFxAnalysis:UseOptWeights No
#set /Herwig/Analysis/FxFxAnalysis:NormOptWeights Yes # different normalization for weights
#insert theGenerator:AnalysisHandlers 0 /Herwig/Analysis/FxFxAnalysis
#insert /Herwig/Analysis/FxFxAnalysis:Analyses 0 MC_XS
-#insert /Herwig/Analysis/FxFxAnalysis:Analyses 1 MC_TTBAR
-#insert /Herwig/Analysis/FxFxAnalysis:Analyses 2 ATLAS_2014_I1304289
-#insert /Herwig/Analysis/FxFxAnalysis:Analyses 2 ATLAS_2013_I1243871
-#insert /Herwig/Analysis/FxFxAnalysis:Analyses 3 ATLAS_2014_I1304688
-#insert /Herwig/Analysis/FxFxAnalysis:Analyses 4 ATLAS_2015_I1345452
+
# A HepMC dump file (requires --with-hepmc to be set at configure time)
#insert theGenerator:AnalysisHandlers 0 /Herwig/Analysis/HepMCFile
#set /Herwig/Analysis/HepMCFile:PrintEvent 100
#set /Herwig/Analysis/HepMCFile:Format GenEvent
#set /Herwig/Analysis/HepMCFile:Units GeV_mm
# set the weight normalization
#set /Herwig/EventHandlers/theLesHouchesHandler:WeightNormalization CrossSection
################
# Save the run #
################
cd /Herwig/Generators
saverun FxFx-Tree theGenerator
diff --git a/src/FxFx.in b/src/FxFx.in
--- a/src/FxFx.in
+++ b/src/FxFx.in
@@ -1,194 +1,185 @@
#############################################################
# Create an event generator taking the default EventGenerator #
# as the starting point ... #
#############################################################
cd /Herwig/Generators
# Copy the default EventGenerator with its settings to a new
# which will be the basis of the one we use for showering:
cp EventGenerator theGenerator
#############################################################
# Create a LH event handler (set up & assigned below) ... #
#############################################################
cd /Herwig/EventHandlers
library HwFxFx.so
create Herwig::FxFxEventHandler theLesHouchesHandler
#############################################################
# Create a LH reader (set up & assigned below) ... #
#############################################################
cd /Herwig/EventHandlers
#library HwFxFx.so
create Herwig::FxFxFileReader theLHReader
#############################################################
# Create an FxFxHandler (set up & assigned below) ... #
#############################################################
cd /Herwig/Shower
library HwFxFxHandler.so
create Herwig::FxFxHandler FxFxHandler
-set /Herwig/Shower/FxFxHandler:ShowerModel /Herwig/Shower/ShowerModel
set /Herwig/Shower/FxFxHandler:SplittingGenerator /Herwig/Shower/SplittingGenerator
+set /Herwig/Shower/FxFxHandler:KinematicsReconstructor /Herwig/Shower/KinematicsReconstructor
+set /Herwig/Shower/FxFxHandler:PartnerFinder /Herwig/Shower/PartnerFinder
#############################################################
# Create an LHAPDF (set up & assigned below) ... #
#############################################################
cd /Herwig/Partons
create ThePEG::LHAPDF thePDFset ThePEGLHAPDF.so
############################################################
# Create a cuts object ... #
############################################################
cd /Herwig/EventHandlers
create ThePEG::Cuts /Herwig/Cuts/NoCuts
#############################################################
# Setup the LH event handler ... #\
#############################################################
cd /Herwig/EventHandlers
insert theLesHouchesHandler:FxFxReaders[0] theLHReader
set theLesHouchesHandler:WeightOption VarNegWeight
set theLesHouchesHandler:PartonExtractor /Herwig/Partons/PPExtractor
set theLesHouchesHandler:CascadeHandler /Herwig/Shower/FxFxHandler
set theLesHouchesHandler:HadronizationHandler /Herwig/Hadronization/ClusterHadHandler
set theLesHouchesHandler:DecayHandler /Herwig/Decays/DecayHandler
############################################################
##################################################
# Shower parameters
##################################################
# normally, you want
# the scale supplied in the event files (SCALUP)
# to be used as a pT veto scale in the parton shower
set /Herwig/Shower/ShowerHandler:MaxPtIsMuF Yes
set /Herwig/Shower/ShowerHandler:RestrictPhasespace Yes
# Shower parameters
# treatment of wide angle radiation
set /Herwig/Shower/PartnerFinder:PartnerMethod Random
set /Herwig/Shower/PartnerFinder:ScaleChoice Partner
-# fix issue before 7.0.5 (not needed after this)
-#set /Herwig/Shower/GtoQQbarSplitFn:AngularOrdered Yes
-#set /Herwig/Shower/GammatoQQbarSplitFn:AngularOrdered Yes
# with MC@NLO these parameters are required for consistency of the subtraction terms
# suggested parameters
set /Herwig/Shower/KinematicsReconstructor:InitialInitialBoostOption LongTransBoost
set /Herwig/Shower/KinematicsReconstructor:ReconstructionOption General
-set /Herwig/Shower/KinematicsReconstructor:FinalStateReconOption Default
set /Herwig/Shower/KinematicsReconstructor:InitialStateReconOption Rapidity
set /Herwig/Shower/ShowerHandler:SpinCorrelations No
############################################################
#############################################################
# Set up the LH reader ... #
#############################################################
cd /Herwig/EventHandlers
set theLHReader:WeightWarnings false
# Input event file name:
# 100 k
set theLHReader:FileName NAME_OF_FILE #(the file can be compressed (gziped,bziped))
set theLHReader:MomentumTreatment RescaleEnergy
set theLHReader:Cuts /Herwig/Cuts/NoCuts
####################################################
# Set up the generator ... #
####################################################
cd /Herwig/Generators
set theGenerator:EventHandler /Herwig/EventHandlers/theLesHouchesHandler
set theGenerator:NumberOfEvents 100000000
set theGenerator:RandomNumberGenerator:Seed 31122001
set theGenerator:PrintEvent 1
set theGenerator:MaxErrors 10000
#########################################################
# Option to off shower / hadronization / decays / MPI. #
#########################################################
cd /Herwig/EventHandlers
# set theLesHouchesHandler:CascadeHandler NULL
#set theLesHouchesHandler:HadronizationHandler NULL
# remove the quark check in case hadronization is turned off
# set /Herwig/Analysis/Basics:CheckQuark false
#set theLesHouchesHandler:DecayHandler NULL
# The handler for multiple parton interactions
#set /Herwig/Shower/FxFxHandler:MPIHandler NULL
#############################################################
# Set up the FxFxHandler ... #
#############################################################
cd /Herwig/Shower
set /Herwig/Shower/FxFxHandler:MPIHandler /Herwig/UnderlyingEvent/MPIHandler
set /Herwig/Shower/FxFxHandler:RemDecayer /Herwig/Partons/RemnantDecayer
set /Herwig/Shower/FxFxHandler:ShowerAlpha AlphaQCD
# set the heavy quark decay product vetoing process on/off
set FxFxHandler:HeavyQVeto Yes
# Automatic detection of the hard process (experimental)
set FxFxHandler:HardProcessDetection Automatic
# No. of light jets in maximum-multiplicity FxFx process
set FxFxHandler:njetsmax 1 # Make sure this is set correctly!
# Mimimum parton-parton R-sep used for generation.
set FxFxHandler:drjmin 0
#########################################################
# Recommended key merging parameters below #
#########################################################
cd /Herwig/Shower
# turn the Vetoing On or Off completely
set FxFxHandler:VetoIsTurnedOff VetoingIsOn
# merging mode: in this case FxFx:
set FxFxHandler:MergeMode FxFx
# merging scale
set FxFxHandler:ETClus 25*GeV
# jet radius used in clustering in merging.
set FxFxHandler:RClus 1.0
# Max |eta| for jets in clustering in merging.
set FxFxHandler:EtaClusMax 10
# Default 1.5 factor used to decide if a jet matches a parton
# in merging: if DR(parton,jet)<rclusfactor*rclus the parton
# and jet are said to have been matched.
set FxFxHandler:RClusFactor 1.5
#########################################################
# Rivet settings and other analyses #
#########################################################
cd /Herwig/Generators
# Stuff for rivet:
#create ThePEG::RivetAnalysis /Herwig/Analysis/RivetAnalysis RivetAnalysis.so
#insert theGenerator:AnalysisHandlers 0 /Herwig/Analysis/RivetAnalysis
#insert /Herwig/Analysis/RivetAnalysis:Analyses 0 MC_XS
-#insert /Herwig/Analysis/RivetAnalysis:Analyses 1 ATLAS_2011_I928289_Z
-#insert /Herwig/Analysis/RivetAnalysis:Analyses 2 ATLAS_2011_I945498
-#insert /Herwig/Analysis/RivetAnalysis:Analyses 3 ATLAS_2011_S9131140
-#insert /Herwig/Analysis/RivetAnalysis:Analyses 4 ATLAS_2013_I1230812
-#insert /Herwig/Analysis/RivetAnalysis:Analyses 5 ATLAS_2014_I1315949
+#insert /Herwig/Analysis/RivetAnalysis:Analyses 1 ATLAS_2017_I1514251
+
cd /Herwig/Generators
# Stuff for rivet:
#create ThePEG::FxFxAnalysis /Herwig/Analysis/FxFxAnalysis FxFxAnalysis.so
# use the optional weights (WARNING: runs rivet multiple times!)
#set /Herwig/Analysis/FxFxAnalysis:UseOptWeights No
#set /Herwig/Analysis/FxFxAnalysis:NormOptWeights Yes # different normalization for weights
#insert theGenerator:AnalysisHandlers 0 /Herwig/Analysis/FxFxAnalysis
#insert /Herwig/Analysis/FxFxAnalysis:Analyses 0 MC_XS
-#insert /Herwig/Analysis/FxFxAnalysis:Analyses 1 MC_TTBAR
-#insert /Herwig/Analysis/FxFxAnalysis:Analyses 2 ATLAS_2014_I1304289
-#insert /Herwig/Analysis/FxFxAnalysis:Analyses 2 ATLAS_2013_I1243871
-#insert /Herwig/Analysis/FxFxAnalysis:Analyses 3 ATLAS_2014_I1304688
-#insert /Herwig/Analysis/FxFxAnalysis:Analyses 4 ATLAS_2015_I1345452
+#insert /Herwig/Analysis/RivetAnalysis:Analyses 1 ATLAS_2017_I1514251
+
# A HepMC dump file (requires --with-hepmc to be set at configure time)
#insert theGenerator:AnalysisHandlers 0 /Herwig/Analysis/HepMCFile
#set /Herwig/Analysis/HepMCFile:PrintEvent 100
#set /Herwig/Analysis/HepMCFile:Format GenEvent
#set /Herwig/Analysis/HepMCFile:Units GeV_mm
# set the weight normalization
set /Herwig/EventHandlers/theLesHouchesHandler:WeightNormalization CrossSection
################
# Save the run #
################
cd /Herwig/Generators
saverun FxFx theGenerator
diff --git a/src/LHE.in b/src/LHE.in
--- a/src/LHE.in
+++ b/src/LHE.in
@@ -1,100 +1,96 @@
##################################################
# Example generator based on LHC parameters
# usage: Herwig read LHE.in
##################################################
read snippets/PPCollider.in
##################################################
# Technical parameters for this run
##################################################
cd /Herwig/Generators
set EventGenerator:NumberOfEvents 10000000
set EventGenerator:RandomNumberGenerator:Seed 31122001
set EventGenerator:DebugLevel 0
set EventGenerator:PrintEvent 10
set EventGenerator:MaxErrors 10000
##################################################
# Create the Les Houches file handler and reader
##################################################
cd /Herwig/EventHandlers
library LesHouches.so
# create the event handler
create ThePEG::LesHouchesEventHandler LesHouchesHandler
# set the various step handlers
set LesHouchesHandler:PartonExtractor /Herwig/Partons/PPExtractor
set LesHouchesHandler:CascadeHandler /Herwig/Shower/ShowerHandler
set LesHouchesHandler:DecayHandler /Herwig/Decays/DecayHandler
set LesHouchesHandler:HadronizationHandler /Herwig/Hadronization/ClusterHadHandler
# set the weight option (e.g. for MC@NLO)
set LesHouchesHandler:WeightOption VarNegWeight
# set event hander as one to be used
set /Herwig/Generators/EventGenerator:EventHandler /Herwig/EventHandlers/LesHouchesHandler
# Set up an EMPTY CUTS object
# Normally you will have imposed any cuts you want
# when generating the event file and don't want any more
# in particular for POWHEG and MC@NLO you must not apply cuts on the
# the extra jet
create ThePEG::Cuts /Herwig/Cuts/NoCuts
# You may wish to use the same PDF as the events were generated with
create ThePEG::LHAPDF /Herwig/Partons/LHAPDF ThePEGLHAPDF.so
set /Herwig/Partons/LHAPDF:PDFName NAME_OF_PDF
set /Herwig/Partons/LHAPDF:RemnantHandler /Herwig/Partons/HadronRemnants
set /Herwig/Particles/p+:PDF /Herwig/Partons/LHAPDF
set /Herwig/Particles/pbar-:PDF /Herwig/Partons/LHAPDF
set /Herwig/Partons/PPExtractor:FirstPDF /Herwig/Partons/LHAPDF
set /Herwig/Partons/PPExtractor:SecondPDF /Herwig/Partons/LHAPDF
# We would recommend the shower uses the default PDFs with which it was tuned.
# However it can be argued that the same set as for the sample should be used for
# matched samples, i.e. MC@NLO (and less so POWHEG)
#set /Herwig/Shower/ShowerHandler:PDFA /Herwig/Partons/LHAPDF
#set /Herwig/Shower/ShowerHandler:PDFB /Herwig/Partons/LHAPDF
# You can in principle also change the PDFs for the remnant extraction and
# multiple scattering. As the generator was tuned with the default values
# this is STRONGLY DISCOURAGED without retuning the MPI parameters
# create the reader and set cuts
create ThePEG::LesHouchesFileReader LesHouchesReader
set LesHouchesReader:FileName NAME_OF_FILE #(the file can be compressed (gziped,bziped))
set LesHouchesReader:AllowedToReOpen No
set LesHouchesReader:InitPDFs 0
set LesHouchesReader:Cuts /Herwig/Cuts/NoCuts
# option to ensure momentum conservation is O.K. due rounding errors (recommended)
set LesHouchesReader:MomentumTreatment RescaleEnergy
# set the pdfs
set LesHouchesReader:PDFA /Herwig/Partons/LHAPDF
set LesHouchesReader:PDFB /Herwig/Partons/LHAPDF
# if using BSM models with QNUMBER info
#set LesHouchesReader:QNumbers Yes
#set LesHouchesReader:Decayer /Herwig/Decays/Mambo
# and add to handler
insert LesHouchesHandler:LesHouchesReaders 0 LesHouchesReader
##################################################
# Shower parameters
##################################################
# normally, especially for POWHEG, you want
# the scale supplied in the event files (SCALUP)
# to be used as a pT veto scale in the parton shower
set /Herwig/Shower/ShowerHandler:MaxPtIsMuF Yes
set /Herwig/Shower/ShowerHandler:RestrictPhasespace Yes
# Shower parameters
# treatment of wide angle radiation
set /Herwig/Shower/PartnerFinder:PartnerMethod Random
set /Herwig/Shower/PartnerFinder:ScaleChoice Partner
-# fix issue before 7.0.5 (not needed after this)
-set /Herwig/Shower/GtoQQbarSplitFn:AngularOrdered Yes
-set /Herwig/Shower/GammatoQQbarSplitFn:AngularOrdered Yes
# with MC@NLO these parameters are required for consistency of the subtraction terms
# suggested parameters (give worse physics results with POWHEG)
#set /Herwig/Shower/KinematicsReconstructor:InitialInitialBoostOption LongTransBoost
#set /Herwig/Shower/KinematicsReconstructor:ReconstructionOption General
-#set /Herwig/Shower/KinematicsReconstructor:FinalStateReconOption Default
#set /Herwig/Shower/KinematicsReconstructor:InitialStateReconOption Rapidity
#set /Herwig/Shower/ShowerHandler:SpinCorrelations No
##################################################
# LHC physics parameters (override defaults here)
##################################################
# e.g if different top mass used
#set /Herwig/Particles/t:NominalMass 173.0
##################################################
# Save run for later usage with 'Herwig run'
##################################################
cd /Herwig/Generators
saverun LHE EventGenerator
diff --git a/src/Makefile.am b/src/Makefile.am
--- a/src/Makefile.am
+++ b/src/Makefile.am
@@ -1,228 +1,228 @@
SUBDIRS = defaults snippets Matchbox Merging
defaultsdir = ${pkgdatadir}/defaults
bin_PROGRAMS = Herwig
Herwig_SOURCES = \
HerwigMain.cc HerwigCLI.cc HerwigCLI.h \
herwigopts.c herwigopts.h
BUILT_SOURCES = herwigopts.c herwigopts.h
Herwig_LDFLAGS = $(AM_LDFLAGS) -export-dynamic $(THEPEGLDFLAGS)
Herwig_LDADD = $(THEPEGLIB) -ldl \
$(top_builddir)/API/libHerwigAPI.la
bin_SCRIPTS = herwig-config
HELPERFILES = \
CMSSM40.1.1.slha \
NMSSM.spc \
ADD.model \
Leptoquark.model \
LH.model \
LHTP.model \
MSSM.model \
MUED.model \
NMSSM.model \
RPV-Bi.model \
RPV-Tri.model \
RS.model \
Sextet.model \
TTBA.model \
Zprime.model \
RPV-BI.slha \
RPV-TRI.slha \
RPV-UDD.slha
INPUTFILES = \
DIS.in \
DIS-Matchbox.in \
GammaGamma.in \
ILC.in \
ILC-MSSM.in \
ILC-MUED.in \
ILC-RS.in \
LEP.in \
LEP-Matchbox.in \
LHC-ADD.in \
LHC-CEX.in \
LHC-GammaGamma.in \
LHC-ResolvedGammaGamma.in \
LHC.in \
LHC-Matchbox.in \
LHC-LQ.in \
LHC-MSSM.in \
LHC-MUED.in \
LHC-NMSSM.in \
LHC-Powheg.in \
LHC-RPV.in \
LHC-RS.in \
LHC-Sextet.in \
LHC-TRP.in \
LHC-TTBA.in \
LHC-MB.in \
LHC-ZP.in \
TVT.in \
TVT-Powheg.in \
TVT-TTBA.in \
LHC-LH.in \
LHC-LHTP.in \
LHE.in \
-HW7-Zjets-FxFx-FxFx.in\
-HW7-Zjets-FxFx-Tree.in
+FxFx.in\
+FxFx-Tree.in
dist_pkgdata_DATA = $(INPUTFILES) $(HELPERFILES)
pkgdata_DATA = Makefile-UserModules
CLEANFILES = HerwigDefaults.rpo \
*.run *.log *.out *.tex \
multi.test *.output probs.test chisq.value \
LHC-RS-BR.spc LHC-MSSM-BR.spc LHC-RPV-BR.spc
clean-local:
-rm -rf Herwig
## checking targets ##
HerwigDefaults.rpo: Herwig $(srcdir)/defaults/*.in defaults/PDF.in defaults/Analysis.in $(top_builddir)/lib/*.so
./Herwig init -L$(top_builddir)/lib defaults/HerwigDefaults.in -D
check_BSM_Full=
check_BSM=
if WANT_BSM
check_BSM += check-LHC-RPV check-LHC-RS
check_BSM_Full += \
check-LHC-RPV check-LHC-MSSM check-ILC-MSSM \
check-LHC-NMSSM \
check-LHC-MUED check-ILC-MUED \
check-LHC-RS check-ILC-RS check-LHC-ADD \
check-LHC-LH check-LHC-LHTP \
check-LHC-TRP \
check-LHC-TTBA check-TVT-TTBA \
check-LHC-ZP \
check-LHC-LQ \
check-LHC-Sextet
endif
check_BSM_Full_valgrind = $(subst check,check-valgrind,$(check_BSM_Full))
check_BSM_valgrind = $(subst check,check-valgrind,$(check_BSM))
check-local: check-LEP check-LHC $(check_BSM) check-DIS check-ILC check-GammaGamma check-LHC-Powheg
check-valgrind-local: check-valgrind-LEP check-valgrind-LHC $(check_BSM_valgrind) check-valgrind-DIS check-valgrind-ILC check-valgrind-GammaGamma check-valgrind-LHC-Powheg
check-Powheg: check-LHC-Powheg check-TVT-Powheg
check-valgrind-Powheg: check-valgrind-LHC-Powheg check-valgrind-TVT-Powheg
check-BSM: $(check_BSM_Full)
check-valgrind-BSM: $(check_BSM_Full_valgrind)
check_Matchbox= \
check-LEP-Matchbox check-DIS-Matchbox check-LHC-Matchbox
check_Matchbox_valgrind = $(subst check,check-valgrind,$(check_Matchbox))
check-Matchbox: $(check_Matchbox)
check-valgrind-Matchbox: $(check_Matchbox_valgrind)
check-extra: check-LHC-CEX check-LHC-GammaGamma check-LHC-ResolvedGammaGamma check-LHC-MB check-TVT
check-valgrind-extra: check-valgrind-LHC-CEX check-valgrind-LHC-GammaGamma check-valgrind-LHC-MB check-valgrind-TVT
check-all: check-local check-Powheg check-BSM check-Matchbox check-extra
check-valgrind-all: check-valgrind-local check-valgrind-Powheg check-valgrind-BSM check-valgrind-Matchbox check-valgrind-extra
link-helper-files:
@for i in $(HELPERFILES); do \
if test -f $(srcdir)/$$i -a ! -e $$i; then \
$(LN_S) -f $(srcdir)/$$i; fi; done
## valgrind targets ##
VALGRIND=valgrind --leak-check=full --num-callers=25 --freelist-vol=100000000 --leak-resolution=med --trace-children=yes
check-valgrind-%: $(srcdir)/%.in HerwigDefaults.rpo link-helper-files
$(VALGRIND) ./Herwig read -d1 -D $< &> valgrind-$(notdir $(subst .in,,$<))-read.log
$(VALGRIND) ./Herwig run $(notdir $(subst .in,.run,$<)) -N 500 -d1 -D &> valgrind-$(notdir $(subst .in,,$<))-run.log
valgrind: valgrind-init valgrind-read valgrind-run
valgrind-init:
$(VALGRIND) ./Herwig init -d1 -D -L$(top_builddir)/lib defaults/HerwigDefaults.in \
&> /tmp/valgrind-init.log
valgrind-read:
$(VALGRIND) ./Herwig read -d1 -D LHC.in &> /tmp/valgrind-read.log
valgrind-run:
$(VALGRIND) ./Herwig run -d1 -D -N5 LHC.run &> /tmp/valgrind-run.log
CHECKCOMMAND = ./Herwig run $(notdir $(subst .in,.run,$<)) -N500 -d1 -D
check-%: $(srcdir)/%.in HerwigDefaults.rpo link-helper-files
./Herwig read -i . $< -D
@echo $(CHECKCOMMAND)
@$(CHECKCOMMAND) && echo "# $@ OK #" \
|| (echo "###### $@ BAD ######"; false)
SETUPTHEPEG=$(THEPEGPATH)/bin/setupThePEG
THEPEGREPO=$(THEPEGLIBPATH)/ThePEGDefaults.rpo
install-data-hook:
@echo Creating repository
@./Herwig init -L$(DESTDIR)$(pkglibdir) -i$(DESTDIR)$(pkgdatadir) -i$(DESTDIR)$(pkgdatadir)/snippets $(DESTDIR)$(defaultsdir)/HerwigDefaults.in --repo=$(DESTDIR)$(pkgdatadir)/HerwigDefaults.rpo
@if test -n "$(DESTDIR)"; \
then sed -i.bak -e "s@$(DESTDIR)@@g" $(DESTDIR)$(pkgdatadir)/HerwigDefaults.rpo; \
rm -f $(DESTDIR)$(pkgdatadir)/HerwigDefaults.rpo.bak; \
fi
uninstall-hook:
rm -f $(DESTDIR)$(pkgdatadir)/HerwigDefaults.rpo
register: register-with-thepeg-repo
register-with-thepeg-repo:
@if test -x "$(SETUPTHEPEG)" -a -w "$(THEPEGREPO)"; \
then echo Registering with ThePEG; \
"$(SETUPTHEPEG)" --init \
$(DESTDIR)$(defaultsdir)/HerwigDefaults.in \
-r "$(THEPEGREPO)" -o "$(THEPEGREPO)" \
-i $(DESTDIR)$(pkgdatadir) \
-l$(DESTDIR)$(pkglibdir) ; \
if test -n "$(DESTDIR)"; \
then sed -i -e "s@$(DESTDIR)@@g" "$(THEPEGREPO)" ; fi ; \
fi
unregister : unregister-from-thepeg-repo
unregister-from-thepeg-repo:
@if test -x "$(SETUPTHEPEG)" -a -w "$(THEPEGREPO)"; \
then echo Unregistering with ThePEG; \
"$(SETUPTHEPEG)" --init defaults/HerwigCleanup.in \
-r "$(THEPEGREPO)" -o "$(THEPEGREPO)" \
-l$(DESTDIR)$(pkglibdir) ; \
fi
EXTRA_DIST = herwigopts.ggo
nodist_Herwig_SOURCES = hgstamp.inc
BUILT_SOURCES += hgstamp.inc
CLEANFILES += hgstamp.inc
HGVERSION := $(shell hg -R $(top_srcdir) parents --template '"Herwig {node|short} ({branch})"' 2> /dev/null || echo \"$(PACKAGE_STRING)\" || true )
.PHONY: update_hgstamp
hgstamp.inc: update_hgstamp
@[ -f $@ ] || touch $@
@echo '$(HGVERSION)' | cmp -s $@ - || echo '$(HGVERSION)' > $@
GENGETOPT = gengetopt
%opts.h %opts.c : %opts.ggo
$(GENGETOPT) < $<

File Metadata

Mime Type
text/x-diff
Expires
Tue, Nov 19, 7:15 PM (1 d, 12 h)
Storage Engine
blob
Storage Format
Raw Data
Storage Handle
3805788
Default Alt Text
(29 KB)

Event Timeline